Oregon Scientific RMR802 digital body thermometer

About Oregon Scientific ........................................... 7
EU-Declaration of Conformity .................................. 7
FCC Statement ........................................................... 8
Declaration of Conformity ........................................ 8
USER MANUAL
CONTENTS
Overview ..................................................................... 2
Front View .............................................................. 2
Back View .............................................................. 2
Remote Sensor ....................................................... 3
Getting Started ........................................................... 3
Solar Panel .............................................................. 3
Insert Batteries ........................................................ 3
Remote Sensor ........................................................... 3
Sensor Data Transmission ...................................... 4
Clock ........................................................................... 4
Clock Reception ...................................................... 4
Manually Set Clock ................................................. 5
Temperature ............................................................... 5
Ice Warning ............................................................. 6
Reset ........................................................................... 6
Precautions ................................................................ 6
Specifications ............................................................ 7
1
EN
Solar Clock with Indoor / Outdoor
Temperature
Model:RMR802 / RMR802A
EN
7. Outdoor temperature
OVERVIEW
8. Time zone (RMR802A only)
FRONT VIEW
9. Clock with weekday
1
10. MEM: View current, maximum and minimum
temperature
11. Ice alert LED indicator
BACK VIEW
2
7
3
4
8
9
5
10
11
6
1. Solar panel
1
2
3
2. Remote sensor reception indicator
3. Clock signal reception indicator
4. Indoor temperature
5. MODE: Change settings / display
6.
/
: Increase / decrease value; activate /
deactivate clock reception signal;
: toggle
between outdoor channels (1-3)
2
EN
1. RESET: Reset unit to default settings
INSERT BATTERIES
2. EU / UK: Select the nearest radio signal (RMR802
only)
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. °C / °F: Select temperature unit
3. Press RESET after each battery change.
REMOTE SENSOR
LOCATION
2
MEANING
Clock / alarm
Main unit batteries low
Outdoor temperature
Sensor batteries low
1
3
4
5
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment.
1.
LED status indicator
2. Insert the battery, matching the polarities.
2.
Wall mount hole
3. Select a channel then press RESET.
3.
Battery compartment
4. Close the battery door.
4.
RESET hole
5.
CHANNEL switch
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 1.5 m (5 ft) and which can shield it from direct
sunlight or wet conditions for an accurate reading.
GETTING STARTED
SOLAR PANEL
The solar panel is an energy saving feature, which is an
environmentally friendly way to provide additional power
to the main unit and prolongs battery life. However, it
cannot replace battery power entirely.
3
EN
The sensor reception icon in the remote sensor area
shows the status:
ICON
DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be
found.
1.5 m (5 ft)
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal.
SENSOR DATA TRANSMISSION
To search for a sensor:
RMR802:
Press and hold
Slide EU / UK to select the signal received.
+ MODE.
4
•
EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
•
UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
•
RMR802: Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
RMR802A: Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
To enable / disable signal reception:
Press and hold
reception.
to enable or
NOTE The language options are English (E), German
(D), French (F), Italian (I), Spanish (S) and Russian
(R).
to disable signal
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.If
signal reception is unsuccessful, place your unit next
to force another signal
to a window, press and hold
search.
To select display mode:
Press MODE to choose between clock with seconds,
clock with weekday or calendar.
Clock signal reception indicator:
STRONG
SIGNAL
TEMPERATURE
WEAK / NO
SIGNAL
To toggle temperature unit:
Press °C / °F.
To toggle between each outdoor sensor’s readings:
Press
Press and hold + MEM for 2 seconds to initiate auto
toggle of outdoor channels.
To set the clock manually, disable the signal reception
first.
To end press
1. Press and hold MODE.
2. Press
or
.
To toggle between current, minimum and maximum
records:
to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (day – month /
month – day), month, day and language.
repeatedly.
OR
MANUALLY SET CLOCK
Press MEM repeatedly.
To clear the records:
5
Press and hold MEM.
EN
RMR802A:
EN
ICE WARNING
•
If the sensor falls between 3°C to -2 °C (37°F to 28°F),
the green LED indicator will flash, and will stop flashing
once the temperature is out of this range.
When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.
•
Placement of this product on certain types of
wood may result in damage to its finish for which
Oregon Scientific will not be responsible. Consult
the furniture manufacturer’s care instructions for
information.
•
The contents of this manual may not be reproduced
without the permission of the manufacturer.
•
Do not dispose old batteries as unsorted municipal
waste. Collection of such waste separately for
special treatment is necessary.
•
Please note that some units are equipped with
a battery safety strip. Remove the strip from the
battery compartment before first use.
NOTE As ice alert is only applicable to channel 1,
to prevent flashing of LED, select channel 2 or 3 on
outdoor sensor.
RESET
Press RESET to return to the default settings.
PRECAUTIONS
•
Do not subject the unit to excessive force, shock,
dust, temperature or humidity.
•
Do not cover the ventilation holes with any items
such as newspapers, curtains etc.
•
Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
•
Do not clean the unit with abrasive or corrosive
materials.
•
Do not tamper with the unit’s internal components.
This invalidates the warranty.
•
Only use fresh batteries. Do not mix new and old
batteries.
•
Images shown in this manual may differ from the
actual display.
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
NOTE Features and accessories will not be available
in all countries. For more information, please contact
your local retailer.
6
EN
SPECIFICATIONS
ABOUT OREGON SCIENTIFIC
DESCRIPTION
Visit our website (www.oregonscientific.com) to learn
more about Oregon Scientific products.
LxWxH
75 x 33 x 120 mm
(2.95 x 1.30 x 4.72 in)
If you’re in the US and would like to contact our
Customer Care department directly, please visit: www2.
oregonscientific.com/service/support
Weight
112 g (3.95 oz)
without battery
Temperature range
-5°C to 50°C
(23°F to 122°F)
For international inquiries, please visit: www2.
oregonscientific.com/about/international
Signal frequency
433 MHz
Power
2 x UM-4 (AAA) 1.5 V
batteries
TYPE
MAIN UNIT
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Solar
Clock with Indoor / Outdoor Temperature (Model:
RMR802 / RMR802A) is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC. A copy of the signed and dated Declaration
of Conformity is available on request via our Oregon
Scientific Customer Service.
REMOTE UNIT (THN132N)
LxWxH
96 x 50 x 22 mm
(3.78 x 1.97 x 0.87 in)
Weight
62g (2.22 ounces)
Transmission range
30m (98 ft) unobstructed
Temperature range
-20°C to 60°C
(-4°F to 140°F)
Power
1 x UM-3 (AA) 1.5 V
batteries
COUNTRIES RTTE APPROVAL COMPLIED
All EC countries,Switzerland CH
and Norway N
7
EN
•
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
DECLARATION OF CONFORMITY
The following information is not to be used as contact
for support or sales. Please visit our website at www2.
oregonscientific.com/service for all enquiries.
WARNING Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
We
NOTE This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV
technician for help.
Name:
Oregon Scientific, Inc.
Address:
19861 SW 95th Ave.,Tualatin,
Telephone No.:
1-800-853-8883
Oregon 97062 USA
declare that the product
Product No.:
RMR802 / RMR802A
Product Name:
Solar Clock with Indoor / Outdoor
Temperature
Manufacturer:
IDT Technology Limited
Address:
Block C, 9/F, Kaiser Estate,Phase 1,41
Man Yue St., Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: 1) This device
may not cause harmful interference. 2) This device must
accept any interference received, including interference
that may cause undesired operation.
8
EN
© 2009 Oregon Scientific. All rights reserved.
P/N: 300102249-00001-10
9
EN
Solar Clock with Indoor / Outdoor Temperature
Model:RMR802 / RMR802A
USER MANUAL
10