IPF520
IPF525
IPF555
EN User Manual
Dear Customer
About this User Manual
Introduction Brand Variable
EN
With the purchase of this device, you have chosen a quality
PHILIPS product brand. Their device fulfils the most varied requirements for private use or in your office and business everyday.
Your device is delivered with a starter cartridge for a few
test pages.
You can assign frequently dialled numbers to speed dial
keys or short dialling numbers. These functions help you
to call these numbers quickly.
The built-in answering machine (IPF¦555) stores up to 30
minutes of messages. You can record internal and external
voice messages (= memos). Using remote message retrieval,
you can call new messages from each telephone.
You can send fax messages in different resolutions to one
or more recipients. You can also poll faxes.
Select the resolution for text and photo in order to copy
documents with your device. You can also create multiple
copies.
You can send SMS messages from your device if this service
is activated for your telephone line (this function is not
supported in all countries and networks). Received SMS
messages can be managed with the extensive functions of
the SMS menu.
We hope you enjoy your device and its many functions!
Short and Speed Dialling
2
With the installation guide on the following pages, you can
start using your device quickly and easily. Detailed descriptions can be found in the following sections of this user
manual.
Read the entire user manual carefully. Follow all safety
instructions in order to ensure proper operation of your
device. The manufacturer accepts no liability if these
instructions are not followed.
Multiple models of this device series are described in this
user manual. Please note that some functions are only
available with specific models.
Symbols Used
Dangers
DANGER!
DANGER!
Warns about dangers for people, damage to the
device or other objects as well as possible loss of
data. Injuries or damage can result from
improper handling.
Troubleshooting
Notice
Troubleshooting
This symbol designates tips that will help you to
use your device more effectively and easily.
Philips · IPF 520 · 525 · 555
Table of Contents
Dear Customer ............................................................ 2
About this User Manual .............................................. 2
1 General Safety Information ................ 4
Setting Up the Machine ...............................................
Power Supply ..............................................................
Repairs .........................................................................
Consumable Materials .................................................
4
4
4
4
2 Overview............................................... 5
Overview of the Menu Functions ................................ 5
Machine Overview ....................................................... 6
Panel ........................................................................... 7
3 Initial Operation .................................. 8
Packing contents .......................................................... 8
Attaching Paper Tray ................................................... 8
Loading Paper ............................................................. 8
Connecting handset ..................................................... 9
Connecting the Telephone Cable ................................ 9
Connecting the Mains Cable ....................................... 9
Inserting Ink Cartridge ................................................ 9
Initial Installation ...................................................... 10
4 Telephone Functions ......................... 12
Placing a call to the device .........................................
Hands-Free ................................................................
Secret mode ...............................................................
Speed Dialling ...........................................................
Telephone Book of the Device ...................................
Calling Line Identification (CLIP) .............................
Missed Calls ..............................................................
12
12
12
12
13
14
14
5 Answering Machine ........................... 15
Switching on and off .................................................
Editing the outgoing message ....................................
Listening to messages .................................................
Deleting Messages .....................................................
Recording Internal Memos ........................................
Setting up Remote Access ..........................................
Using remote access ...................................................
Remote Control Functions ........................................
Forwarding Messages .................................................
Modifying the Settings ..............................................
15
15
16
16
16
16
17
17
17
18
6 Fax ....................................................... 19
Sending fax ................................................................
Sending Fax Manually ...............................................
Direct Inward Dialling or Selecting Sub-address ........
Sending to Multiple Recipients (= Broadcasting) .......
Sending Fax Later ......................................................
Fax Reception ............................................................
Polling Faxes ..............................................................
Selective Spam Filter ..................................................
19
19
19
20
20
21
21
21
8 SMS ..................................................... 23
SMS Requirements ....................................................
Sending SMS .............................................................
Sending saved SMS ....................................................
Receiving SMS ...........................................................
Composing SMS ........................................................
Printing SMSs ............................................................
Deleting SMS ............................................................
Modifying the Settings ...............................................
23
23
24
24
25
25
25
25
9 Settings............................................... 27
Entering the Date and Time ......................................
Selecting the Language ...............................................
Selecting the Country ................................................
Entering Name and Fax Number ...............................
Entering Print Position ..............................................
Setting the Contrast ...................................................
Setting Page Adjustment ............................................
Adjusting Volume Level .............................................
Setting the fax switch .................................................
Setting the fax switch .................................................
Printing Lists .............................................................
Starting Initial Installation .........................................
Eavesdropping while Connection is Established .........
Set Up Receipt of Longer Documents ........................
27
27
27
27
28
28
28
28
29
29
31
32
32
32
10 Telephone Lines and Additional
Devices .................................................... 33
Configuring Telephone Lines and Services .................
PABX Systems ...........................................................
Connecting Additional Devices ..................................
Using Additional Telephones (Easylink) ....................
Detecting call signal clock pulse automatically ...........
33
33
34
34
35
11 Service ................................................ 36
Changing the Ink Cartridge .......................................
Fixing a Paper Jam .....................................................
Fixing a Document Jam .............................................
Cleaning ....................................................................
Power Cycling ............................................................
Troubleshooting ........................................................
36
37
37
37
39
40
12 Appendix ............................................ 41
Technical Data ..........................................................
Guarantee ..................................................................
Declaration of Conformity (DoC) .............................
Customer Information ...............................................
41
41
42
44
7 Copier ................................................. 22
Inserting Documents ................................................. 22
Copying a Document ................................................ 22
Table of Contents
3
EN
1 General Safety Information
Introduction 3
EN
Your device has been tested in conformity with standards
EN 60950-1 and IEC 60950-1 and should only be operated with telephone systems and power equipment that
meet these standards. The device was built exclusively for
use in the indicated sales region.
Do not make any changes or settings that are not described
in this user manual. Physical injury or damage to the
device or loss of data can result from improper handling.
Take note of all warning and safety notes indicated.
Introduction 2
Setting Up the Machine
The device should rest securely on a stabile, flat surface.
The device should rest securely on a stabile, flat surface. If
the device should fall, it can be damaged or can cause
injury to people, especially small children. Position all
cables in such a way that no one will stumble on them, thus
avoiding possible injuries to persons or damage to the
device itself.
The distance between the device and other devices or
objects must be at least 15 centimetres; this also applies to
the use of additional cordless telephones. Do not place the
device in the vicinity of radios or televisions.
Lock the cover of the device completely into place when
opening the device. You could be injured if the cover falls
while you are working on the device.
Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the
device in the vicinity of heaters or air conditioners.
Observe the information on temperature and humidity in
the technical data.
The device must have sufficient ventilation and may not be
covered. Do not put your device in closed cabinets or
boxes. Do not place the machine on soft surfaces such as
tablecloths or carpets and do not cover the ventilation slits.
Otherwise, the device can overheat and catch on fire.
In the event that the device becomes too hot, or if you see
smoke coming from the device, you must immediately pull
the power cable out of the power socket. Have your device
examined by trained professionals at a technical service
location. To prevent the spread of fire, open flames should
be kept away from the device.
Do not plug in the device in moist rooms. Never touch the
mains cable, the mains connection or the telephone socket
with wet hands.
Do not allow liquids to enter into the device. Disconnect
the device from the power socket if liquids or foreign
objects have entered the device and have your device examined by trained professionals at a technical service location.
Do not allow children to handle the device without supervision. The packing materials should be kept out of the
hands of children.
The telephone handset of the device is magnetic. Caution,
small metallic objects (paper clips) may be retained if
placed near or on the telephone handset.
The distance between the device and other appliances or objects, must be at least 15 centimetres.
Lock the cover of the device completely into place
Protect the device against direct sunlight
The device must have sufficient ventilation
In the event that the device becomes too hot, or if you see smoke coming from the device
Do not plug in the device in moist rooms.
Do not allow liquids to enter into the device.
Do not allow children to handle the device without supervision.
Power Supply
Check whether the mains voltage of your device
Check whether the mains voltage of your device (indicated
on the type label) matches the mains voltage available at
the setup location.
Use only the power and telephones cables supplied.
Set up your device so that the power socket is easily accessible. The device does not have an on/off button. In an
emergency, disconnect your device from the power supply
by pulling the power plug.
Never touch the power or telephone cable if the insulation
is damaged. Replace damaged wires immediately. Use suitable cables only; if necessary please contact our technical
customer service or your retailer.
Disconnect your device from the power and telephone networks during an electrical storm. If this is not possible, do
not use the device during an electrical storm.
Before cleaning the surface of your device, disconnect it
from the power and telephone networks. Use a soft, lintfree cloth. Never use liquid, gaseous or easily flammable
cleansers (sprays, abrasives, polishes, alcohol). Do not
allow any moisture to reach the interior of the device.
Only clean the display with a dry, soft cloth. If the display
breaks, a mildly corrosive liquid may escape. Avoid all contact with your skin and eyes.
In the event of a power failure, your device will not function; saved data is retained.
Use only the power and telephones cables supplied.
The device does not have an on/off button.
Never touch the power or telephone cable if the insulation is damaged.
Disconnect your device from the power and telephone networks during an electrical storm.
Before cleaning the surface of your device, disconnect it from the power and telephone networks.
Only clean the display with a dry, soft cloth.
In the event of a power failure, your device will not function;
Repairs
Display
Should disruptions occur, follow the instructions on the
display and on the error report.
Do not make any repairs to the device yourself. Improper
maintenance can result in injuries or damage to the device.
Only have your device repaired by an authorised service
centre.
Do not remove the type label from your device; this would
void the warranty.
Repairs
Consumable Materials
Original Consumable Material
Use only original consumable materials. These are available from a specialised retailer or through our order service
(see back side of this user manual). Other consumable
materials could damage the device or shorten its service
life.
Dispose of old consumable materials according to the
waste regulations of your country.
Environment
Magnetic telephone handset
4
Philips · IPF 520 · 525 · 555
2 Overview
Overview of the Menu Functions
Calling Ijet 3 Menu Functions
Press MENU to open the function menu. Page through
[ menu entries. Confirm the selected function with o.
Select further functions using [ or o. Press C to return
to the previous menu level. Press j to close the menu and
return to the starting mode.
— RECEPT. SET-UP
— RECEPTION MODE (IPF¦520)
— AUTOMATIC
— MANUAL
— RECEPTION MODE (IPF¦525, IPF¦555)
— AUTOMATIC
— TAD/FAX
— MANUAL
— PHONE/FAX
— SILENT RX
— RING VOLUME
— RINGS NUMBER
— BLACK LIST
— PRINT SET-UP
— TX FROM MEMORY
— PRINT REPORT
— LAST TX REPORT
— CALLER ID LIST
— LAST BROADCAST
— ACTIVITY REPORT
— PHONE BOOK
— CART. MAINTEN.
— FAX SET-UP
— DATE AND TIME
— SET DATE/TIME
— DATE FORMAT
— HOUR FORMAT
— VARIOUS SETT.
— ECM
— TX REPORT
— FAX HEADER
— BUZZER VOLUME
— CONTRAST
— PRINTER PARAM.
— REDUCTION
— SURPLUS
— PRINT SET-UP
— POLLING RX
— INSTALLATION
— STATION NAME
— STATION NUMBER
— DISTINCT. RING (IPF¦525, IPF¦555)
Reception mode basic (TypeBasic)
Reception mode Type 3 with handset
— TEL.LINE SETUP
— LINE TYPE
— DIAL MODE (country dependent)
— CALLER ID
— PBX FLASH
— REMOTE CONTROL
— FAX/TEL TIMER (IPF¦525, IPF¦555)
— SILENCE LAPSE (IPF¦555)
— LINE MONITOR
— LANGUAGE
— COUNTRY SET-UP
— PRINT INSTALL.
— TECHN. SERVICE
— TAD SET-UP (IPF¦555)
— ICM ON SPEAKER
— OGM #1
— OGM #2
— OGM #3
— FORWARD MSGS
— ANNOUNCE ONLY
— ICM REC.TIME
— SECURITY
— TOLL SAVER
— PRINT SET-UP
EN
TAM Settings
Print out protocol
Fax set up
Installation
Overview · Overview of the Menu Functions
5
Machine Overview
EN
‚ Handset (IPF¦525, IPF¦555)
ƒ Paper tray
„ Document feeder (writing facing up)
… Panel with display
‚ EXT socket—Connection socket for additional
devices
ƒ LINE socket—Connection socket for telephone cable
„ ) Telephone handset socket—Connection socket for
the telephone handset (IPF¦525, IPF¦555)
Bodenansicht
Vorderansicht
6
Philips · IPF 520 · 525 · 555
Panel
Telephone Book Entries ljet 3
m—Calling up the telephone book entries. Select the
entries with [ or with the numeric keys
q—Recalling speed dial entries.
Green Lamp _—It flashes whenever an SMS message
has arrived or when a document is waiting to be retrieved
from the fax memory.
Red lamp Æ—If the lamp flashes or is lit, please read what
is indicated on the display
j—Function abort / abort copying / return to the starting
mode / delete error message
MENU—Call-up menu functions / call-up copy menu
(document in the document feeder) / switch to 12 hour
clock AM, PM / adjust volume level
u—Move the cursor
o—Starting transmission of messages / starting copying
C—Return to the previous menu level / press briefly:
deleting individual characters / press and hold: deleting
complete input
_—Calling up the SMS menu (function is not supported in all countries and networks) / in countries where
the SMS function is not supported, start the print out of
fax transmission reports using this key (list of the last ten
fax messages sent and received).
Speed Dial Keys Ijet 2
Green Lamp (SMS)
Red Lamp
Stop Key Ijet 2
Menu Functions ljet 3
Left/Right Arrow Key Ijet 3
Start Key Ijet 2
C Key Ijet 2
SMS Key Ijet 3
Overview · Panel
Loudspeaker Key with/without Handset Ijet 3
ß—(IPF¦520): Listening while the connection is established / (IPF¦525, IPF¦555): Dialling with the handset
replaced / (IPF¦525, IPF¦555): hands-free
@—Toggling between the list of the last 10 dialled numbers (= redial list), and the list of last 20 callers (= caller
list). Confirm using o / insert dialling pause
R - trigger flash function (only if the device is configured
as an extension) / (IPF¦525, IPF¦555): Switching between
calls (= call toggling)
f x—Setting higher resolution for faxes and copying /
switching microphone off for hands-free
Numeric keypad—Inputting digits, characters and special
characters
Redial ljet 3
R Key with/without Handset Ijet 3
Numeric Keypad Ijet 3
Heading answering machine keys
Answering machine keys
Type 2 (großer Core)
(IPF¦555)
ç—Playback of the saved messages/ interrupting during
playback
å – Listening to previous message
æ – Listening to next message /listen to message again/in
the starting mode, recording a memo.
C—Deleting current message during play-back /press
twice, delete all messages
Answering machine keys
ipf 520-555
7
EN
3 Initial Operation
EN
Packing contents
Loading Paper
Packing contents Basic Primo Voice
Paper Format
‚ Device
ƒ Telephone handset (IPF¦525, IPF¦555)
„ Spiral cable for telephone handset (IPF¦525, IPF¦555)
… Paper tray
† Mains cable with plug (country-specific)
‡ Telephone cable with plug (country-specific)
ˆ Ink cartridge (black)
User manual with installation guide (not depicted)
Before you can receive documents or make copies, you
must load paper into the device. Please use only appropriate paper in standard format A4 (210 × 297 millimetre ·
preferably 80 g/m2). Follow the specifications in the technical data.
Loading Paper
Notice
Loading Paper
Separate the paper sheets by fanning them out,
then align them by tapping edge of the stack lightly
against a flat surface. This will prevent several
sheets of paper from being drawn in all at once.
User Manual
Verpackungsinhalt
Preparing Paper
Loading Paper
Loading Paper
1 Fold open the paper feed flap towards front until stop.
Missing Package Contents
Notice
Missing Package Contents
If one of the parts is missing or damaged, please
contact your retailer or our customer service.
Attaching Paper Tray
Attaching Paper Tray
Insert the paper tray in the opening provided for it.
Papierhalter einstecken
2 Insert paper in the paper feeder. You can insert maximum 100 sheets (A4 · 80 g/m2).
3 Close the paper feed flap.
8
Philips · IPF 520 · 525 · 555
Connecting handset
Connecting the Mains Cable
Type 3 (mit Telefon)
Mains Voltage at the Site of Installation
(IPF¦525, IPF¦555)
Plug one end of the spiral cable into the socket on the telephone handset. Put the other end into the socket at the
device bottom marked with ) symbol.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of your device
(indicated on the type label) matches the mains
voltage available at the setup location.
Telefonhörer anschließen
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Plug the power cable into the electrical outlet.
Netzkabel anschließen Faxjet
Connecting the Telephone
Cable
Connecting the Telephone Cable
Inserting Ink Cartridge
Notice
Analogue Fax Machine
Your device is an analogue fax device (Group 3).
It is not an ISDN device (Group 4), and therefore it cannot be operated directly on an ISDN
connection. In order to do this, you need either
an analogue adapter or a connection for analogue terminals.
1 Open the control panel, by lifting and folding it up in
the centre. Click the control panel completely in place.
Connecting the Telephone Cable
Connect the telephone cable to the device by inserting it in
the socket designated with LINE (RJ-11-Connector).
Insert the telephone plug into your PTT line socket.
Telefonkabel anschließen
2 Open the cartridge compartment by pressing on the
upper right corner of the document holder (arrow) and
then carefully lifting it backwards. Click the document
holder completely in place.
PABX Systems 1
Notice
Connection to Private Automatic
Branch Exchange
If you connect your device as extension to a telephone system, you must set it for working as an
extension (also see Chapter Telephone connections and additional devices, page 33).
Initial Operation · Connecting handset
9
EN
3 Remove the cartridge from the packing and remove the
protective strips.
7 Then close the control panel.
EN
CAUTION!
Remove the Protection Strip!
Please make certain that the protective strip
has been completely removed. Be careful not
to touch the nozzles or contacts.
4 Insert the cartridge into the holder with the coloured
end facing front and the contacts facing down.
Notice
Only Insert Cartridge When Connected to the Electric Power Source
Only insert the cartridge if the device is connected to the electricity power supply. Otherwise, the cartridge will not be detected.
Initial Installation
After you connect your device to the mains voltage, the initial installation commences.
Starting Initial Installation Process
Notice
Starting Initial Installation Process
You can start the initial installation at a later
point of time using MENU and 1 also
Printing the Functions List
Notice
Printing the Functions List
You can print the menu overview using MENU
and 2.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with o.
Selecting the Country
5 Press the cartridge down until it snaps into place.
6 Close the device by folding the document holder down
and swivelling the metal bracket upward.
Setting the Country Correctly
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your device is not
adapted to the telephone network. If your country is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
Setting the Country
1 Use [ to select the country in which you are operating the device.
2 Confirm with o.
10
Philips · IPF 520 · 525 · 555
Activating the Printing Head
1 Confirm NEW PRINT CART.? using 1 to set the
ink level memory to "full“.
2 A test page is printed.
3 Check the print sample for interruptions.
4 If necessary, repeat the printing using 0.
5 You can finish using 1 and j.
EN
Entering the Date and Time
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o.
4 Confirm DATE AND TIME with o.
5 Select using [ SET DATE/TIME.
6 Confirm with o.
7 Enter the date (two digits each) e.g.
080608 for 08.06.08.
8 Enter the time, e.g. 1400 for 2 pm.
9 Confirm with o.
10 You can exit with j.
Notice
Format of Time and Date
Select further settings in step 5 using [
DATE FORMAT—Change the date format
HOUR FORMAT—Change the time format (12/
24 clock).
Time and Date After a Short Power Failure
Notice
Time and Date After a Short Power
Failure
If SET DATE/TIME appears in the display,
you must adjust the date and time.
1 Press MENU and confirm using o.
2 Enter the date and time with the numeric keys.
3 Confirm with o.
Initial Operation · Initial Installation
11
4 Telephone Functions
Link: Additional Telephones
EN
CLIP Prerequisite
For information on how to connect additional telephones
and which functions are available to you, please refer the
chapter on Telephone Connections and Additional
Devices, Page 33.
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Identification (CLIP) must be activated for your telephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.
Placing a call to the device
Type 3 (mit Telefon)
(IPF¦525, IPF¦555)
No Paper in Feeder
Notice
No Paper in Paper Feeder
No paper must be present in the paper feeder for
the telephone function. Otherwise the device
switches to fax operation.
Dial the desired number. There are several ways to do this:
Then pick up the handset.
Direct Dialling
Notice
Type 3 (mit Telefon)
(IPF¦525, IPF¦555)
1 Press ß to dial without lifting up the handset. You will
hear a dial tone from the loudspeaker.
2 Enter the desired number using the numeric keypad or
select a saved entry. The dialling process begins immediately. At this stage, any numbers that have been
incorrectly entered can no longer be changed.
Adjusting Volume Level
Direct Dialling
You can also lift up the receiver first, then dial a
number. The dialling process begins immediately.
Manual Dialling:
Dial the desired number using the numeric keypad.
Telephone Book:
1 Press m.
2 Select an entry using [.
Notice
Navigating in the Telephone Book
Enter the starting letters with the numeric
keypad to quickly navigate through the telephone book.
Speed Dialling:
Press and hold (at least two seconds) the desired speed dial
key (q).
Redial List:
1 Press @.
2 Using ^ select OUTGOING CALLS.
3 Confirm with o.
4 Use [ to select an entry from the list of the dialled
numbers.
5 Confirm with o.
Caller List:
1 Press @.
2 Using ` select INCOMING CALLS.
3 Confirm with o.
4 Use the [ to select an entry from the list of callers.
5 Confirm with o.
12
Hands-Free
Notice
Adjusting Volume Level
Using MENU, set the volume.
Secret mode
Type 3 (mit Telefon)
(IPF¦525, IPF¦555)
You can put the handset on mute, if you want to speak to
someone without letting the caller hear the conversation.
1 During a call, press ê. Your caller cannot hear anymore. LINE ON HOLD appears on the display.
2 Press ê again to continue with the call.
Speed Dialling
Speed Dialling
You can assign the speed dial keys to frequently dialled telephone numbers. You can load these telephone numbers
quickly with the speed dial keys.
Assigning Speed Dial Entry
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PHONE BOOK.
3 Confirm with o.
4 Confirm NEW NUMBER with o.
5 Enter 01—04 as a position for the speed dial keys
(q) with the numeric keys. The position must
always be a two digit number.
Notice
Speed Dial Entry Assigned
If you select a position that is already
assigned, a message appears on the display.
6 Confirm with o.
Philips · IPF 520 · 525 · 555
7 Enter the telephone numbers.
8 Confirm with o.
9 Enter the name.
10 Confirm with o.
11 Select a ring tone using [.
12 Confirm with o.
13 Using [ select if would like to save further entries or
exit the function.
14 Confirm with o.
Deleting a Speed Dial Entry
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PHONE BOOK.
3 Confirm with o.
4 Using [ select DELETE.
5 Confirm with o.
6 Using [ select the entry which you would like to
delete.
Notice
Positions of the Speed Dial Entries
Speed dial entries are only saved in positions
01 to 04.
7 Confirm with o.
8 Using [ select YES.
9 Confirm with o.
Telephone Book of the
Device
Notice
Telephone Book Entry Assigned
If you select a position that is already
assigned, a message appears on the display. If
necessary, print out the telephone book in
order to receive an overview of the positions
that are still available.
7 Enter the telephone numbers.
8 Confirm with o.
9 Enter the name. You can enter characters using the
numeric keys (see key labels). Enter special characters
using * or #. Press the respective key several times
until the character or special character appears on the
display.
10 Confirm with o.
11 Select a ring tone using [.
12 Confirm with o. The entry is saved.
Save e-mail address
You can also save an e-mail address to which SMS messages
can be sent.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PHONE BOOK.
3 Confirm with o.
4 Using [ select NEW ADDRESS.
5 Confirm with o.
6 Enter the position of the entry using the numeric keys.
The position must always be a two digit number.
7 Confirm with o.
8 Enter the e-mail address.
Telephone Book ljet 3
You can store up to 100 entries in the telephone book of
your device. You can assign various ring tones to the
entries. Follow the specifications in the technical data.
Notice
Navigating in the Telephone Book
You can move the cursor using u. Use C to
delete individual characters. Press j to close the
menu and return to the starting mode.
Notice
Enter E-Mail Addresses
Please note that e-mail addresses cannot contain a space.
9 Confirm with o.
10 Enter the name.
11 Confirm with o. The entry is saved.
Saving Entry
Edit Entry
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PHONE BOOK.
3 Confirm with o.
4 Confirm NEW NUMBER with o.
5 Enter the position of the entry using the numeric keys.
The position must always be a two digit number.
6 Confirm with o.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PHONE BOOK.
3 Confirm with o.
4 Using [ select MODIFY.
5 Confirm with o.
Telephone Functions · Telephone Book of the Device
13
EN
6 Using [ select the entry which you would like to edit.
Notice
Navigating in the Telephone Book
Enter the initial letters with the numeric keys
to quickly navigate through the telephone
book.
EN
7 Confirm with o.
8 Edit the number.
9 Confirm with o.
10 Edit the name.
11 Confirm with o.
12 Select a ring tone using [.
13 Confirm with o. The changed entry is saved.
Calling Line Identification
(CLIP)
CLIP Definition
The number of an incoming call appears on the display.
For this function to work, the Calling Line Identification
Presentation (CLIP) must be activated for your telephone
connection. Enquire with your telephone company. Caller
Line Identification may be associated with a fee.
Notice
Setting the Country Correctly
If the Caller Line Identification does not work
even though the function is activated for your
telephone connection, check if you have set the
correct country.
Number is Suppressed
Deleting an Entry
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PHONE BOOK.
3 Confirm with o.
4 Using [ select DELETE.
5 Confirm with o.
6 Using [ select the entry which you would like to
delete.
Notice
Navigating in the Telephone Book
Enter the initial letters with the numeric keys
to quickly navigate through the telephone
book.
7 Confirm with o.
8 Using [ select YES.
9 Confirm with o.
Printing the Telephone Book
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PHONE BOOK.
3 Confirm with o.
4 Using [ select PRINT PHONE B..
5 Confirm with o.
Notice
Number is Suppressed
The number and name will not be shown if the
caller suppresses his number.
Switching Caller Line Identification On/Off
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ TEL.LINE SETUP.
5 Confirm with o.
6 Select using [ CALLER ID.
7 Confirm with o.
8 Using [ select whether the telephone number of the
caller is to be displayed or not .
9 Confirm with o.
10 You can exit with j.
Missed Calls
Type 3 (mit Telefon)
(IPF¦525, IPF¦555)
1 Press @.
2 Using ` select INCOMING CALLS.
3 Press o.
4 Using [, you can page through the list of missed calls.
Notice
Newly missed calls are indicated by means of
a flashing indicator light.
5 Confirm with o.
6 To call back, pick up the handset.
14
Philips · IPF 520 · 525 · 555
5 Answering Machine
Type 2 (großer Core)
(IPF¦555)
Switching on and off
Switching on the answering machine only with announcement and AM/FAX ljet 3
Notice
Switching on the Answering Machine
only with Outgoing Message
The answering machine can be switched on only
if an outgoing message has been recorded. The
reception mode must be set to TAD/FAX.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Press o.
3 Confirm RECEPTION MODE with o.
4 Using [ select
TAD/FAX – Answering machine switched on.
PHONE/FAX – Answering machine switched off.
5 Confirm with o.
Editing the outgoing message
Recording the outgoing message:
You can also record an outgoing message which the caller
hears for which no message can be recorded in reply (=
external memo). You can read how you switch this function on, in the “using announcement without recording
message” section.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select OGM #1.
5 Confirm with o.
6 Using [ select RECORD.
7 Confirm with o. LIFT HANDSET appears on the
display.
8 Pick up the telephone handset and press o to record
the outgoing message.
9 Press j to end the recording. The outgoing message is
played back.
10 Hang up the handset.
11 You can exit with j.
Announcement if message memory is full
You can record an additional outgoing message, which the
caller hears if no new messages can be stored.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select OGM #2.
5 Confirm with o.
6 Using [ select RECORD.
7 Confirm with o. LIFT HANDSET appears on the
display.
8 Pick up the telephone handset and press o to record
the outgoing message.
9 Press j to end the recording. The outgoing message is
played back.
10 Hang up the handset.
11 You can exit with j.
Playing back the outgoing message
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select OGM #1 or OGM #2.
5 Confirm PLAY with o. The outgoing message is
played back.
Notice
Adjusting Volume Level
Using MENU, set the volume.
Notice
Modify Outgoing Message
After playback you can modify or rerecord
the announcement.
6 You can exit with j.
Length 10>20 Seconds
Notice
Length of Outgoing Message
The outgoing message must be longer than ten
seconds and shorter than twenty seconds.
Answering Machine · Switching on and off
15
EN
Using announcement without
recording message
EN
You can adjust the answering machine so that the caller
hears an outgoing message for which no message can be
recorded in reply (= external memo). You can read how to
record an outgoing message in the “recording outgoing
message” section.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select ANNOUNCE ONLY.
5 Confirm with o.
6 Use [ to select whether you would like to turn the
function on or off.
7 Confirm with o.
Notice
Overwriting Existing Outgoing Message
If an outgoing message was already recorded
(OGM #1), the same is played. Use [ after
playing back the message to select from the
following settings:
RECORD - Recording a new outgoing message: The outgoing message (OGM #1) has
now been changed.
PLAY – To listen to the outgoing message:
Listening to messages
If new messages have been received on the answering
machine, flashes _ on the display. The number of the
new messages is shown on the display.
1 Press ç.
2 The new messages are played back. Date and time of
the received message appear on the display.
Adjusting Volume Level
Notice
Adjusting Volume Level
Using MENU, set the volume.
Listening to Confidental Messages
Notice
Listening to Confidental Messages
Pick up the telephone handset to hear confidential messages.
16
Deleting Messages
Deleting Individual Messages
During the playback of message, press C to delete the current message. Delete further messages using C or exit using
j.
Deleting All Messages
1 Press C. DELETE OLD MSG ? appears on the display.
2 Select using [ YES.
3 Confirm with C. The messages are deleted.
Recording Internal Memos
Internal Memos
You can record voice messages (= memos), which can be
played as messages. The limit on duration of recording set
for messages applies even to the recording duration of
memos.
1 Press æ. LIFT HANDSET appears on the display.
2 Pick up the telephone handset and press o to record
the voice message.
Notice
Recording Length for Memos
The configured recording length for incoming messages also limits the length of the
internal memos.
3 Press j to end the recording. The recording is played
back.
4 Hang up the handset.
The voice message is displayed as a new message.
Setting up Remote Access
Entering Access Code
Access Code
You must enter an access code to be able to receive transferred messages, or listen to and control your answering
machine from other telephones.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select SECURITY.
5 Confirm with o.
6 Using [ select TYPE CODE.
7 Confirm with o. If an access code was entered, this
appears on the display.
8 Enter the new access code using the numeric keys.
Philips · IPF 520 · 525 · 555
Remote Control Functions
Notice
Deleting Access Code
You can delete the access code by pressing C.
Note that when the access code is deleted,
everyone has an access to the stored messages.
9 Confirm with o.
10 You can exit with j.
Protecting Answering Machine
against Access by Strangers
By entering an access code you can prevent other persons
from hearing the personal messages, or from changing the
settings of the answering machine.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select SECURITY.
5 Confirm with o.
6 Using [ select ACCESS LOCK.
7 Confirm with o.
8 Using [ select YES to prevent the message from
being heard and the settings from being changed.
9 Confirm with o.
10 You can exit with j.
Listening to Messages
Listening to new messages: Press 1.
Hearing current message again: Press 3.
Listening to all messages: Press 2.
Listening to next message: Press 4.
EN
Deleting Messages
After hearing all messages, press 6 and 6.
Recording a new outgoing message (OGM
#1):
1 Press #3.
2 Press # to end the recording.
Playing back the outgoing message (OGM
#1)
Press 5.
Control Functions
Aborting last function: Press 0.
Switching off answering machine (reception mode
AUTOMATIC): Press #1.
Switching on answering machine (reception mode
TAD/FAX): Press #2.
Switching off forwarding: Press #5.
Switching on external memo function
(ANNOUNCE ONLY): Press #4.
Access Only with Access Code
Notice
Access Only with Access Code
You can hear the messages or change the settings
only after entering the saved code.
Using remote access
You can hear and delete new messages, record a new outgoing message or switch answering machine on or off with
a telephone call.
Tone Dialling
Notice
Tone Dialling
The telephone on this connection must be set to
tone dialling. Press a key within 50 seconds, otherwise the connection is cut-off (country and
network dependent).
1 Call your number.
2 Wait, until the answering machine switches on and
plays the outgoing message.
3 Enter the access code (default 1234).
4 You hear a confirmation tone.
5 The functions listed below are available using the
numeric keys.
6 Hang up to end the remote access.
Answering Machine · Using remote access
Forwarding Messages
The device transmits messages to an entered telephone
number at a certain time-of-day. If the connection is established a message is played.
Recording a Greeting Text
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select OGM #3.
5 Confirm with o.
6 Using [ select RECORD.
7 Confirm with o. LIFT HANDSET appears on the
display.
8 Pick up the telephone handset and press o to record
the outgoing message.
9 Press j to end the recording. The outgoing message is
played back.
10 Hang up the handset.
11 You can exit with j.
17
Switch on forwarding
EN
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select FORWARD MSGS.
Notice
Modifying or Printing Settings
If you already done settings, confirm
ALREADY ENTERED using o. Use [ to
select whether you would like to modify or
delete the settings.
5 Confirm with o.
6 Use [ to select from the following settings:
OFF—No forwarding
ONE TIME—No forwarding
DAILY—Daily forwarding
7 Confirm with o.
8 Using the numeric keys, enter the time at which the
forwarding is to take place.
9 Confirm with o.
10 Enter the telephone number to which the received messages are to be forwarded.
11 Confirm with o.
12 You can exit with j.
Modifying the Settings
Switching Eavesdropping on/off
You can select whether the caller is to be heard when leaving a message or not.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm ICM ON SPEAKER with o.
4 Using [ select whether the loudspeakers should be
switched on /off when the answering machine is
switched on.
5 Confirm with o.
6 You can exit with j.
4
5
6
7
8
Using [ select ICM REC.TIME.
Confirm with o.
Select the desired recording duration using [.
Confirm with o.
You can exit with j.
Economy Operating Mode
With this function you can identify whether new messages
have been recorded or not from the number of rings. If the
device picks up after the set number of rings, you have
received new messages. If no new messages have been
received, the answering machine switches on after two
more rings than the setting if no new messages have been
received. You can terminate the remote access without
incurring any telephone costs.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select TOLL SAVER.
5 Confirm with o.
6 Switch the function on/off using [.
7 Confirm with o.
8 You can exit with j.
Printing the answering machine
settings
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
4 Using [ select PRINT SET-UP.
5 Confirm with o.
6 Using [ select whether you would like to have a
printout.
7 Confirm with o.
Setting the Recording Duration
You can limit the length of the incoming messages and
internal memos.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TAD SET-UP.
3 Confirm with o. ICM ON SPEAKER appears on the
display.
18
Philips · IPF 520 · 525 · 555
6 Fax
Unsuitable Documents!
CAUTION!
Unsuitable Documents!
Do not insert any documents into the device
that ...
... are wet, have been edited with correction
fluid, are soiled or have a coated surface.
… that are written on with a soft pencil, with
paint, chalk or charcoal.
… originate from newspapers or magazines
(printing ink).
… that are held together with office or notebook
staples or with tape or glue.
… are pasted with note papers.
… are creased, crumpled or torn.
Press j to eject the documents during the transmission
process.
Sending fax
1 Insert the documents face up into the document feeder.
The top most document will be fed in first.
Manual Dialling:
Dial the desired number using the numeric keypad.
Redial List:
Press @.
Using ^ select OUTGOING CALLS.
Confirm with o.
Use [ to select an entry from the list of the dialled numbers.
Caller List:
Press @.
Use ` to select INCOMING CALLS.
Confirm with o.
Use the [ to select an entry from the list of callers.
CLIP Prerequisite
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Identification (CLIP) must be activated for your telephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.
Telephone Book:
1 Press m.
2 Select an entry using [.
Notice
Navigating in the Telephone Book
Enter the starting letters with the numeric
keypad to quickly navigate through the telephone book.
Sending Fax Manually
2 Set the desired resolution using f x. An arrow on the
display shows the selected setting.
~—Standard (for documents without special features)
f—Fine (for texts with small print or drawings)
x—Photo (for photos).
3 Dial the desired number. There are several ways to do
this:
Notice
(IPF¦520): You can only call up the redial list,
caller list and telephone book if a document
is located in the document feeder.
1 Insert the document.
2 Press ß or pick up the telephone handset.
3 Enter the desired number using the numeric keypad or
select a saved entry.
4 Press o. The document will be scanned and transmitted.
5 After successful transmission, a transmission confirmation appears on the display.
Direct Inward Dialling or
Selecting Sub-address
Direct Inward Dialling or Sub-address
You can send a fax to a direct-inward dialling number or a
sub addressor or call from a direct-inward dialling number
or sub address - for example to use a certain service of a fax
database provider. For this purpose, attach the directinward dialling number or sub address with a short dialling
pause to the fax number.
4 Press o.
Fax · Sending fax
19
EN
EN
1 Enter the desired number using the numeric keypad or
select a saved entry.
2 Press @.
3 Enter the direct-inward dialling number or sub address.
4 Press o. The direct-inward dialling number or sub
address is dialled only after a short pause.
Sending to Multiple Recipients (= Broadcasting)
Broadcast Transmissions
You can send one fax to multiple recipients in succession.
Entering Recipients Individually
1 Insert the document.
2 Press MENU. RECEPT. SET-UP appears on the
display.
3 Select using [ TX FROM MEMORY.
4 Confirm with o.
5 Using [ select NEW SETTING.
6 Confirm with o. The document is now read.
7 Accept the displayed time using o or enter the time at
which the document is to be transmitted.
8 Enter the desired number using the numeric keypad or
select a saved entry.
9 Confirm with o.
10 Enter the next telephone numbers. You can enter up to
10 recipients.
11 Confirm with o.
12 Using [ select whether the current settings should be
printed or not.
13 Confirm with o.
14 Confirm YES if the settings are correct using o.
15 The device transmits the fax message successively to all
recipients.
Transmission to Multiple Recipients
Notice
Transmission to Multiple Recipients
If your device cannot reach a recipient, the fax
message is sent to the other recipients. After the
device has called all recipients, it once again dials
the numbers that previously could not be reached.
Modifying or Printing Settings
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TX FROM MEMORY.
3 Confirm with o.
4 Using [ select from the following settings and confirm using o:
PRINT SETTINGS – Printout of the settings
CHANGE—Changes to the time and telephone
number
DELETE – Resetting the settings
20
Sending Fax Later
If you would like to make use of the lower telephone tariffs
or if the recipient can be reached at some specific time
only, you can send the fax at a later time—within 24 hours.
1 Insert the document.
2 Press MENU. RECEPT. SET-UP appears on the
display.
3 Select using [ TX FROM MEMORY.
4 Confirm with o.
5 Using [ select NEW SETTING.
6 Confirm with o. The document is now read.
7 Enter the time, at which the document should be transmitted, e.g. 14 00 for 2 pm. Confirm with o.
8 Enter the desired number using the numeric keypad or
select a saved entry.
9 Press o twice.
10 Using [ select whether the current settings should be
printed or not.
11 Confirm with o.
12 Confirm YES if the settings are correct using o.
13 The device goes into standby mode and transmits the
fax at the entered time. TX FROM MEMORY appears
on the display.
Modifying the Settings
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TX FROM MEMORY.
3 Confirm with o.
4 Using [ select CHANGE.
5 Confirm with o.
6 Enter the time and confirm using o.
7 Change the number and confirm using o.
8 Using [ select whether the current settings should be
printed or not.
9 Confirm with o.
10 Confirm YES if the settings are correct using o.
Deleting Settings
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ TX FROM MEMORY.
3 Confirm with o.
4 Select using [ DELETE.
5 Confirm with o.
6 Using [ select YES.
7 Confirm with o.
8 Using [ select whether the current settings should be
printed or not.
9 Confirm with o.
10 Confirm YES if the settings are correct using o.
Philips · IPF 520 · 525 · 555
Fax Reception
Assign an Entry
Fax Reception
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ BLACK LIST.
4 Confirm with o.
5 Select using [ NEW NUMBER.
6 Confirm with o.
7 Enter the telephone number from which you do not
wish to receive a fax.
8 Confirm with o.
9 Using [ select if you would like save further entries.
10 You can exit with j.
Received faxes are printed out immediately. If no paper or
no ink cartridge is inserted, the device saves incoming fax
messages. The _-display flashes. If you insert paper or a
new ink cartridge, the saved messages are printed.
If the message memory is full, no additional messages can
be received. Follow the specifications in the technical data.
Message Memory Full
Polling Faxes
With the fax polling function, you can retrieve faxes that
lie ready in the dialled device.
Polling Faxes Directly
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ POLLING RX.
3 Confirm with o.
4 Confirm NEW SETTING with o.
5 Accept the displayed time using o or enter the time at
which the document is to be polled.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Confirm with o.
POLL RX appears in the display with the time at which
the document is polled.
Modifying the Settings
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ POLLING RX.
3 Confirm with o.
4 Using [ select from the following settings and confirm using o:
CHANGE—Changes to the time and telephone
number
DELETE – Resetting the settings
Selective Spam Filter
You can store ten telephone numbers, which are ignored
when a fax is received from them. The device rings but the
device does not receive a fax.
Clip Prerequisite Short
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Identification (CLIP) must be activated for your telephone connection (country and network
dependent).
Fax · Fax Reception
Modifying an Entry
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ BLACK LIST.
4 Confirm with o.
5 Select using [ MODIFY NUMBER.
6 Confirm with o.
7 Using [ select the telephone number that you would
like to modify.
8 Confirm with o.
9 Modify the saved number.
10 Confirm with o.
Deleting an Entry
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ BLACK LIST.
4 Confirm with o.
5 Select using [ DELETE NUMBER.
6 Confirm with o.
7 Using [ select the number you would like to delete.
8 Confirm with o.
9 Using [ select YES and confirm with o.
Print List
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ BLACK LIST.
4 Confirm with o.
5 Select using [ PRINT LIST.
6 Confirm with o. The list is printed.
21
EN
7 Copier
20 A5/A4 Documents
Use documents with sizes A5 or A4 with 60 to 100 g/m2
weight. You can insert up to 20 documents at a time.
EN
8 Using the numeric keys, enter how many copies of the
document (max. nine copies) you would like to make.
9 Press o. The copy is created.
Inserting Documents
1 Insert the documents face up into the document feeder.
The top most document will be fed in first.
2 Press o.
3 Set the desired resolution using f x.
TEXT—For documents without special features.
PHOTO—For photos
Copying a Document
Making a Copy
Press o.
Creating Multiple Copies
1 Using the numeric keys, enter how many copies of the
document (max. nine copies) you would like to make.
2 Press o. The copy is created.
Making Copies with Custom Settings
Press MENU.
Using [ select the quality for the copy.
Confirm with o.
Using [ select whether to reduce or enlarge the document in size when copying. You can enlarge to 200
per cent or reduce to 50 per cent.
5 Confirm with o.
6 Using [ select from the displayed contrast settings.
7 Confirm with o.
1
2
3
4
22
Philips · IPF 520 · 525 · 555
8 SMS
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
SMS Requirements
CLIP for SMS
Your device is preset for using the SMS (Short Messaging
Service) services. Caller Line Identification (CLIP) must be
activated for the SMS to work. It is possible that you will not
be able to send and receive SMS messages from a private
branch exchange (depending on the country and network).
SMS with Secret Number
Notice
SMS with Secret Number
Should you face problems in sending SMS, the
reason for the same could be that you are using
a secret number or that the device is connected
to an old ISDN System.
6 Confirm with o.
7 Enter the desired number using the numeric keypad or
select a saved entry.
8 Confirm with o.
9 In some countries you can set whether you would like
to be informed about successfully sent SMS messages.
Select from the options displayed using [ and confirm using o.
10 In some countries you can also send SMS messages to
an extension number or sub address.
Select the SMS message to be sent to the main line
using [ TERMINAL NO. NO and confirm using o..
11 Using [ select YES to send the message. Select NO to
re-edit the message.
Notice
After sending, you can save the SMS. Using [
select YES and confirm with o. The SMS is
saved in the SMS SENT folder.
SMS Requirements
Notice
SMS Requirements
Ask your telephone service provider ...
... whether you must register for the SMS Service.
... to which mobile telephone service providers
you can send SMS
... which costs are applicable.
... which functions are available.
Sending SMS
No originals in the document feeder
Notice
SMS Messages to E-Mail
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
You can send SMS messages to an e-mail address.
1 Press _.
2 Use [ to select EMAIL TYPE.
3 Confirm with o.
4 Enter the e-mail address or press m and select a saved
entry using [.
Notice
No Originals in the Document Feeder
Make sure that no originals are present in the
document feeder.
1 Press _.
2 Confirm SEND SMS with o.
3 In some countries, you can send SMS messages to an email address (EMAIL TYPE) or a fax number (FAX
TYPE).
To send an SMS message to a telephone number select
[ SMS TYPE and confirm using o.
4 SMS TEXT appears on the display with the maximum
number of characters for the SMS message.
5 You can enter characters using the numeric keys (see
button labels).
Notice
In this step, entries must be saved in the telephone book in order for you to be able to
select.
Notice
Enter the @ sign using 1.
E-Mail addresses must not contain a space.
Confirm with o.
Enter the text as described under Sending SMS.
Confirm with o.
Using [ select YES to send the message. Select NO to
re-edit the message.
9 Press o. The message is sent.
5
6
7
8
You can enter special characters using 0.
Enter special characters using * or #.
Using f x switch the input area between
small and capital letters.
You can move the cursor using u.
Use C to delete individual characters.
Press and hold C (at least two seconds) to
delete the entire text.
SMS · SMS Requirements
23
EN
SMS Messages to Fax
Function is not supported in all countries and networks
EN
(Function is not supported in all countries and
networks)
You can send SMS messages to a fax number.
1 Press _.
2 Use [ to select FAX TYPE.
3 Confirm with o.
4 Enter the text as described under Sending SMS.
5 Confirm with o.
6 Enter the desired number using the numeric keypad or
select a saved entry.
7 Confirm with o.
8 In some countries you can also send SMS messages to
an extension number or sub address.
Select the SMS message to be sent to the main line
using [ TERMINAL NO. NO and confirm using o..
9 Using [ select YES to send the message. Select NO to
re-edit the message.
10 Press o. The message is sent.
Direct Inward Dialling or Selecting Sub-address
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
With a sub-address, you send an SMS message to a certain
fax machine that is connected to a telephone line along
with several other devices.
1 Press _.
2 Confirm SEND SMS with o.
3 Enter the text as described under Sending SMS.
4 Press o.
5 Enter the desired number using the numeric keypad or
select a saved entry.
6 Confirm with o.
7 Using [, select YES to activate the extension or sub
address (TERMINAL NO.).
8 Confirm with o.
9 Enter the direct-inward dialling number or sub address.
10 Confirm with o.
11 Using [ select YES to send the message. Select NO to
re-edit the message.
12 Press o. The message is sent.
Sending saved SMS
1 Press _.
2 Using [ select SMS RECEIVED, SMS SENT or
SMS WRITTEN.
3 Confirm with o.
4 Using [ select DISPLAY LIST.
5 Confirm with o.
24
6
7
8
9
Using [ select the SMS that you would like to send.
Confirm with o.
Using [ select SEND.
Confirm with o. The selected SMS is sent.
Receiving SMS
Receiving/saving SMS
SMSs received are saved and can be printed subsequently.
Your device can store up to 30 SMSs.
Reading SMS
When a new SMS is received, the _ symbol lights up.
1 Press _.
2 Select using [ SMS RECEIVED.
3 Confirm with o.
4 Select using [ DISPLAY LIST.
5 Confirm with o.
6 Using [ select the SMS that you would like to read.
7 Press >. The SMS is displayed.
8 Press u to stop the automatic display.
9 Select another SMS using [.
Editing SMS
You can add text to an SMS and save.
1 When reading the SMS, press o.
2 Select using [ EDIT.
3 Confirm with o.
4 Add or delete characters.
5 Confirm with o.
The SMS is saved.
Forwarding SMS
You can forward the read SMS to other persons.
1 For the relevant SMS, press o.
2 Select using [ SEND.
3 Confirm with o.
4 Enter the desired number using the numeric keypad or
select a saved entry.
5 Confirm with o.
The SMS is forwarded.
Calling the sender of the SMS
You can call the sender of the SMS.
1 For the relevant SMS, press o.
2 Using [ select TELEPHONE CALL.
3 Confirm with o. The connection is established.
4 Pick up the handset, when LIFT HANDSET appears
on the display.
5 Hang up to end the call.
Philips · IPF 520 · 525 · 555
Replying an SMS
Deleting SMS
You can add text to a received SMS and reply to the sender.
1 For the relevant SMS, press o.
2 Select using [ ANSWER.
3 Confirm with o.
4 You can modify the message, or add text to it.
5 Confirm with o.
6 Using [ select YES to transmit the SMS or NO to edit
the SMS.
7 Confirm with o. The SMS is sent back to the sender.
SMS Deletion Introduction
Composing SMS
You can enter and save SMSs without sending them. These
SMSs are saved as SMS WRITTEN. You can save up to five
SMS WRITTEN.
1 Press _.
2 Using [ select WRITE SMS.
3 Confirm with o.
4 You can enter characters using the numeric keys (see
button labels).
Notice
You can enter special characters using 0.
Enter special characters using * or #.
Using f x switch the input area between
small and capital letters.
You can move the cursor using u.
Use C to delete individual characters.
Press and hold C (at least two seconds) to
delete the entire text.
5 Confirm with o. The SMS is saved.
Printing SMSs
1 Press _.
2 Using [ select SMS RECEIVED, SMS SENT or
SMS WRITTEN.
3 Confirm with o.
4 Select using [ DISPLAY LIST.
5 Confirm with o.
6 Using [ select the SMS that you would like to print.
7 Confirm with o.
8 Select using [ PRINT.
9 Confirm with o. The selected SMS is printed.
Print list of all SMS messages ljet 3
Notice
You can print a list of all SMS messages in the
selected folder, if you select PRINT LIST
instead of DISPLAY LIST using [.
SMS · Composing SMS
If the message memory is full, the device cannot receive
any more messages. Delete SMS messages to free up memory.
Your device can save 30 received SMSs, 5 composed and
sent SMSs and 5 templates, which are not yet sent.
1 Press _.
2 Using [ select SMS RECEIVED, SMS SENT or
SMS WRITTEN.
3 Confirm with o.
4 Using [ select DISPLAY LIST.
5 Confirm with o.
6 Using [ select the SMS that you would like to delete.
7 Confirm with o.
8 Using [ select DELETE.
9 Confirm with o. The selected SMS is deleted.
Modifying the Settings
Changing Transmitting and
Receiving Numbers
All numbers that you need to send and receive SMSs are
stored in your device. In case you moved to another telephone service provider, you must change these numbers.
1 Press _.
2 Using [ select CONFIGURATION.
3 Confirm with o.
4 Select using [ SERV.CENTRE NO..
5 Confirm with o.
6 Select using [ TX SERV. CENTRE.
7 Enter the number for sending SMS messages.
8 Confirm with o.
9 Select using [ RX SERV. CENTRE.
10 Enter the number for receiving SMS messages.
11 Confirm with o.
12 You can exit with j.
Switching off Audio Signal for SMS
Reception
The reception of an SMS is indicated by a notification
tone. You can switch this notification tone off.
1 Press _.
2 Using [ select CONFIGURATION.
3 Confirm with o.
4 Using [ select SMS RX ADVICE.
5 Confirm with o.
6 Using [ select whether notification tone for the
reception of SMS is to be on or not.
7 Confirm with o.
8 You can exit with j.
25
EN
Set the sub address (Terminal ID)
of the device
Function is not supported in all countries and networks
EN
(Function is not supported in all countries and
networks)
If you have several devices with an SMS function connected to one telephone line, you can assign sub-addresses
to these devices. You can then send SMS messages to a specific device. You can assign your device it’s own sub
address.
1 Press _.
2 Using [ select CONFIGURATION.
3 Confirm with o.
4 Select using [ TERMINAL NO..
5 Confirm with o.
6 Enter the sub address.
The sender can send an SMS message directly to this
device by appending the sub-address to the telephone
number.
7 Confirm with o.
Printing SMS Settings
1 Press _.
2 Using [ select CONFIGURATION.
3 Confirm with o.
4 Select using [ PRINT CONFIG..
5 Confirm with o.
The settings are printed.
26
Philips · IPF 520 · 525 · 555
9 Settings
Calling Ijet 3 Menu Functions
Press MENU to open the function menu. Page through
[ menu entries. Confirm the selected function with o.
Select further functions using [ or o. Press C to return
to the previous menu level. Press j to close the menu and
return to the starting mode.
Selecting the Country
Setting the Country Correctly
CAUTION!
Printing the Functions List
Notice
Printing the Functions List
You can print the menu overview using MENU
and 2.
Entering the Date and Time
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o.
4 Confirm DATE AND TIME with o.
5 Select using [ SET DATE/TIME.
6 Confirm with o.
7 Enter the date (two digits each) e.g.
080608 for 08.06.08.
8 Enter the time, e.g. 1400 for 2 pm.
9 Confirm with o.
10 You can exit with j.
Notice
Format of Time and Date
Select further settings in step 5 using [
DATE FORMAT—Change the date format
HOUR FORMAT—Change the time format (12/
24 clock).
EN
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your device is not
adapted to the telephone network. If your country is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
Reset When Setting the Country
CAUTION!
Settings will be Deleted!
When you select a new country, all settings are
reset to the factory defaults for that country.
Saved data remains intact. Check the number
entered for the header.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o.
4 Using [ select COUNTRY SET-UP.
5 Confirm with o.
6 Use [ to select the country in which you are operating the device.
7 Confirm with o.
Entering Name and Fax
Number
Time and Date After a Short Power Failure
Notice
Time and Date After a Short Power
Failure
If SET DATE/TIME appears in the display,
you must adjust the date and time.
1 Press MENU and confirm using o.
2 Enter the date and time with the numeric keys.
3 Confirm with o.
Selecting the Language
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o.
4 Using [ select LANGUAGE.
5 Confirm with o.
6 Use [ to select the desired display language.
7 Confirm with o.
8 You can exit with j.
Settings · Entering the Date and Time
Your name and your number are transmitted together with
the date, time and page number. The position of the information can be changed.
Entering Name
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o.
4 Confirm STATION NAME with o.
5 Enter your name. You can enter characters using the
numeric keys (see key labels). Enter special characters
using # or *. For this purpose, press the relevant
key several times until the desired character or special
character appears on the display.
6 Confirm with o.
7 You can exit with j.
27
EN
Entering Number
Setting Page Adjustment
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o.
4 Select using [ STATION NUMBER.
5 Confirm with o.
6 Enter your number. Using * you can enter a plus
sign for international telephone numbers.
7 Confirm with o.
8 You can exit with j.
Incoming faxes will be printed out somewhat reduced in
size so that no information is lost.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o. DATE AND TIME appears on the
display.
4 Select using [ PRINTER PARAM..
5 Confirm with o.
6 Using [ select REDUCTION.
7 Confirm with o.
8 Using [ select the value of the page adjustment or
switch the page adjustment off using NO..
9 Confirm with o.
Entering Print Position
You can set whether your name, your number, date and
time should be transmitted to appear outside the transmitted page (page contents) or within the transmitted page.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o. DATE AND TIME appears on the
display.
4 Select using [ VARIOUS SETT..
5 Confirm with o.
6 Select using [ FAX HEADER.
7 Confirm with o.
8 Use [ to select from the following settings:
OUTSIDE—Print position outside the transmitted
page
INSIDE—Print position within the transmitted page
9 Confirm with o.
10 You can exit with j.
Setting the Contrast
For sending fax messages, you can select different contrast
levels.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o. DATE AND TIME appears on the
display.
4 Select using [ VARIOUS SETT..
5 Confirm with o.
6 Select using [ CONTRAST.
7 Confirm with o.
8 Use [ to select from the following settings:
NORMAL—For all types of originals (even white text
on black background)
DARK—For darker printouts
LIGHT—For brighter printout
9 Confirm with o.
10 You can exit with j.
28
Adjusting Volume Level
Setting the Volume of the Ring
Tone
You can set the volume of the ring tone or switch the ring
tone off.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ RING VOLUME.
4 Confirm with o.
5 Select the desired volume using [ or switch the ringing off using DISABLED.
6 Confirm with o.
7 You can exit with j.
Setting the Volume of the Built-in
Buzzer
The built in buzzer warns you of a faulty operation, when
e.g. a wrong key is pressed. You can set the volume of the
built-in buzzer, or switch the buzzer off.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o. DATE AND TIME appears on the
display.
4 Select using [ VARIOUS SETT..
5 Confirm with o.
6 Using [ select BUZZER VOLUME.
7 Confirm with o.
8 Select the desired volume using [ or switch the
buzzer off using DISABLED.
9 Confirm with o.
10 You can exit with j.
Philips · IPF 520 · 525 · 555
Setting the fax switch
Type Basic
(IPF¦520)
The built-in fax switch of your device distinguishes
between fax messages and telephone calls. Faxes are
received automatically. You can set whether faxes will be
received automatically or manually.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Press o.
3 Confirm RECEPTION MODE with o.
4 Use [ to select from the following settings:
AUTOMATIC—Faxes are received automatically.
MANUAL—Faxes are received only on additional telephones. Please read the chapter Connecting Additional
Devices on Page . 34
5 Confirm with o.
Setting the timer
For the reception mode AUTOMATIC you can set whether
the device is to ring before it picks up. This makes it possible for you to receive faxes silently at night without getting disturbed.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ SILENT RX.
4 Confirm with o.
5 Using [ select DAILY.
6 Confirm with o.
7 Enter the time at which the ring tones are to be
switched off (night mode) e,g, 22 00 for 10
pm.
8 Confirm with o.
9 Enter the time at which the ring tones are to be
switched on (day mode) e,g, 06 00 for 6 am.
10 Confirm with o.
11 You can exit with j.
Special settings
5 Use [ to select from the following settings:
NO—Faxes are received with prior ringing.
YES—Faxes are received without prior ringing.
6 Confirm with o.
7 You can exit with j.
EN
Receiving faxes manually
Select manual reception under reception mode of the fax
switch (MANUAL). The device will not receive faxes on its
own. You can start fax reception manually, by pressing o.
This setting is useful, when you want to receive faxes via a
modem connected to a computer.
Setting the fax switch
Type 3 (mit Telefon)
(IPF¦525, IPF¦555)
The built-in fax switch of your device distinguishes
between fax messages and telephone calls. Faxes are automatically received, telephone calls can be received—even
on additionally connected devices. While the device is
checking the call, it continues to ring.
In addition, you can set whether after a certain number of
rings you will receive the call or whether the answering
machine should switch on.
Setting the Fax Reception Mode
Setting the Fax Reception Mode
You have the following options available (model dependent): The selected fax reception mode appears on the display.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Press o.
3 Confirm RECEPTION MODE with o.
4 Using [, select the desired reception mode.
5 Confirm with o.
Reception Mode AUTOMATIC
Fax Mode
In this mode, the device will ring for as many times as you
have set using the RINGS NUMBER function (also see
chapter Setting the Number of Rings, page ). Then the fax
reception switches on. You should select this mode if you
primarily receive faxes at your device.
Reception Mode MANUAL
Manual Mode
Silent Fax Reception
For the reception mode AUTOMATIC you can set whether
the device is to ring before it picks up. This makes it possible for you to receive faxes silently without getting disturbed.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ SILENT RX.
4 Confirm with o.
Settings · Setting the fax switch
In this mode, fax transmissions are not automatically
received by the device. You can start the fax reception manually by pressing o when the fax signal sounds or after the
interlocutor has called. This setting is useful, when you want
to receive faxes via a modem connected to a computer.
Reception Mode PHONE/FAX
TEL/FAX Mode
In this mode, the device checks whether the incoming call
is a fax or telephone call after a set number of rings (setting
RINGS NUMBER) . The device will automatically receive
fax transmissions. While the device is checking the call, it
continues to ring. After the set number of rings (FAX/
TEL TIMER), the device will take over the call and automatically receive a possible silent fax transmission.
29
Reception Mode TAD/FAX
Changing the Number of Rings
Notice
For the reception mode AUTOMATIC, PHONE/FAX or
TAD/FAX you can set how many times the device is to
ring before it picks up. After these many number of rings
the fax (AUTOMATIC, PHONE/FAX mode) or the
answering machine (TAD/FAX mode) switches on.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ RINGS NUMBER.
4 Confirm with o.
5 Select the desired number of rings using [.
6 Confirm with o.
7 You can exit with j.
Recording the Outgoing Message
This mode is only available only if an outgoing
message has already been recorded.
EN
EXT/Answering Machine Mode
You should set the device to this mode if you have additional devices connected to the EXT socket of your device.
If an additionally connected answering machine receives a
call, your device will check to determine whether or not the
incoming call is a fax transmission. If the device receives a
fax signal, it switches the answering machine off and
receives the fax transmission.
If you do not have an answering machine connected or if a
connected answering machine does not accept the call, the
device will take over the call after a set number of rings (setting RINGS NUMBER) and automatically receive any possible fax transmission being sent.
Answering Machine
Fax Switch 1
Fax at Additional Telephone
If you pick up at an additional device and hear
that you are receiving a fax (whistling tone or
silence), you can start the fax reception by pressing *5 on the additional telephone or
pressing o on the device. To use this function,
additional telephones must be set to the tone
dialling mode (DTMF/MFV tones) (for this
purpose see the operating manual of your additional telephone).
Setting the Timer
For the reception mode PHONE/FAX or TAD/FAX you
can set when the device is to ring before it picks up. This
makes it possible for you to receive faxes silently at night
without getting disturbed.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ SILENT RX.
4 Confirm with o.
5 Using [ select DAILY.
6 Confirm with o.
7 Enter the time at which the ring tones are to be
switched off (night mode) e,g, 22 00 for 10
pm.
8 Confirm with o.
9 Enter the time at which the ring tones are to be
switched on (day mode) e,g, 06 00 for 6 am.
10 Confirm with o.
11 You can exit with j.
30
Setting the Ring Duration
Function is not supported in all countries and networks
Notice
(Function is not supported in all countries and
networks)
For the receiving mode PHONE/FAX you can set how
long the device should ring before the device detects that it
is a telephone call (no fax).
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ TEL.LINE SETUP.
5 Confirm with o. LINE TYPE appears on the display.
6 Using [ select FAX/TEL TIMER.
7 Confirm with o.
8 Select the desired ring duration in seconds using [.
9 Confirm with o.
10 You can exit with j.
Silence recognition by the answering machine
If nothing is said when the answering machine is switched
on, you can adjust after what length of time the answering
machine automatically switches off.
Notice
Pause Duration set on External Answering Machine
Please note when plugged into an external
answering machine that the pause duration on
the device is shorter than the time on the external answering machine.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
Philips · IPF 520 · 525 · 555
4 Select using [ TEL.LINE SETUP.
5 Confirm with o. LINE TYPE appears on the display.
6 Using [ select SILENCE LAPSE.
7 Confirm with o.
8 Using o select from the displayed values.
9 Confirm with o.
10 You can exit with j.
Special Settings
Silent Fax Reception
For the reception mode PHONE/FAX or TAD/FAX you
can set whether the device is to ring before it picks up. This
makes it possible for you to receive faxes silently without
getting disturbed.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ SILENT RX.
4 Confirm with o.
5 Use [ to select from the following settings:
NO—Faxes are received with prior ringing.
YES—Faxes are received without prior ringing.
6 Confirm with o.
7 You can exit with j.
Receiving Faxes Manually
Select manual reception under reception mode of the fax
switch (MANUAL). The device will not receive faxes on its
own. You can start fax reception manually, by pressing o
after lifting the handset. This setting is useful, when you
want to receive faxes via a modem connected to a computer.
Printing Transmission Report
Printing Transmission Report
After every transmission, the device prints out a transmission report. If a transmission error occurs, an error report
is printed out. You can switch off printing of the transmission report.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o. DATE AND TIME appears on the
display.
4 Select using [ VARIOUS SETT..
5 Confirm with o.
6 Using [ select TX REPORT.
7 Confirm with o
8 Using [ select:
YES – Transmission report is always printed after each
transmission.
FOR FAILED TX – Transmission report is printed
only after a transmission error.
NO – Printing of the transmission report switched off.
9 Confirm with o.
10 You can exit with j.
Printing Fax Journal
Fax Journal
The fax journal is a list of the last ten faxes sent and
received.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PRINT REPORT.
3 Confirm with o.
4 Using [ select ACTIVITY REPORT.
5 Confirm with o. The fax journal is now printed.
Printing Broadcasting Report
Printing Lists
Printing Call Log
The call log contains the last 50 dialled numbers.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PRINT REPORT.
3 Confirm with o.
4 Using [ select CALLER ID LIST.
5 Confirm with o. The caller list will be printed.
Settings · Printing Lists
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PRINT REPORT.
3 Confirm with o.
4 Using [ select LAST BROADCAST.
5 Confirm with o. The broadcast transmission report is
printed out.
Printing Reports Immediately
You can print reports immediately irrespective of the settings selected for the printing of reports.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ PRINT REPORT.
3 Confirm with o.
4 Using [ select if and which report is to be printed.
5 Confirm with o. The printing commences.
31
EN
Printing Settings
EN
You can print an overview of all device settings.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o. DATE AND TIME appears on the
display.
4 Using [ select PRINT SET-UP.
5 Confirm with o. The current settings are printed.
8 Use [ to select from the following settings:
AUTOMATIC - the text which exceeds the page length
is printed onto a new page, provided it is longer than
8mm.
NO - the text which exceeds the page length is not
printed.
YES - the text which exceeds the page length is always
printed onto a new page.
9 Confirm with o.
Starting Initial Installation
1 Press MENU and 1
2 The initial installation commences.
Eavesdropping while Connection is Established
You can eavesdrop while the connection is establish.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ TEL.LINE SETUP.
5 Confirm with o. LINE TYPE appears on the display.
6 Using [ select LINE MONITOR.
7 Confirm with o.
8 Using [ select whether the speaker should be
switched on while establishing the connection or not .
9 Confirm with o.
Set Up Receipt of Longer
Documents
With this function, you can apply settings whereby documents which are longer than the current paper size are
automatically printed on a new page upon receipt.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ FAX SET-UP.
3 Confirm with o. DATE AND TIME appears on the
display.
4 Using [ select PRINTER PARAM..
5 Confirm with o.
6 Using [ select SURPLUS.
7 Confirm with o.
32
Philips · IPF 520 · 525 · 555
10 Telephone Lines and Additional Devices
Configuring Telephone Lines
and Services
Voice-Mailbox
Type 3 (mit Telefon)
In the event that you use a DSL modem: Connect the
device to the slot intended for analogue telephones/fax
machines! For additional information, please consult the
operating manual of your DSL system. Ask your telephone
or internet service provider if necessary.
(IPF¦525, IPF¦555)
You cannot simultaneously use the answering machine
facility of your telephone service provider (= voice-mail
box) and receive faxes on your devices. Get the mail-box
function for your telephone connection disabled or set the
number of rings for the fax switch to less than 5. When the
fax switch accepts the call, the mail-box of the service provider does not step in. Contact your telephone service provider (also see Chapters "Settings/Setting the Fax Switch").
ISDN Connection
PABX Systems
DSL Connection
DSL Connection
ISDN Connection
Your device is an analogue fax device (Group 3). It is not
an ISDN device (Group 4), and therefore it cannot be
operated directly on an ISDN connection. In order to do
this, you need either an analogue adapter or a connection
for analogue terminals. Details for ISDN connections can
be found in the instructions provided with the terminal
adapter or the dial-up router.
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an outside line
access code in order to get a connection to the public telephone network (PSTN) from a PABX.
Additional Telephone No Extension
Notice
Additional Telephone No Extension
An additional telephone connected to the device
on a telephone socket is not considered an extension.
Selecting the Dialling Process
In some countries you can set the dialling process to pulse
dialling (IWV) or tone dialling (MFV, DTMF tones).
Tone Dialling Disabled
Notice
Tone Dialling Disabled
Use pulse dialling (IWV), only if the tone dialling process (MFV) is disabled for your link.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ TEL.LINE SETUP.
5 Confirm with o. LINE TYPE appears on the display.
6 Select using [ DIAL MODE.
7 Confirm with o.
8 Use [ to select the desired dialling process.
9 Confirm with o.
Voice-Mailbox
Type Basic
(IPF¦520)
You cannot simultaneously use the answering machine
facility of your telephone service provider (= voice-mail
box) and receive faxes on your devices. Get the mailbox
function for your telephone connection deactivated. When
the fax switch accepts the call, the mail-box of the service
provider does not step in. Enquire with your telephone
service provider.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ TEL.LINE SETUP.
5 Confirm with o. LINE TYPE appears on the display.
6 Confirm with o. The display shows e.g.: PUBLIC(PSTN).
7 Select using [ PRIVATE(PBX).
8 Confirm with o.
9 Confirm with o.
10 You can exit with j.
The device is now setup for the PABX operation. You must
enter the outside line access code for the connection to the
public telephone network. This is mostly 0.
Notice
Incorrect Outside Line Access Code
For older telephone systems, the outside line
access code can be R (= FLASH). Read how to
switch this function on in the next section. If the
connection to the public telephone network is
not possible, contact your telephone system supplier.
Telephone Lines and Additional Devices · Configuring Telephone Lines and Services
33
EN
Switch on the Flash Function for
the Extension
EN
For older telephone systems, the outside line access code
can be R (= FLASH). Only in this setting can a connection
to the public telephone network be made. With the flash
function switched on, a flash signal is triggered with the R
key.
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must be
first in the series if multiple devices are connected to the
same telephone socket. Follow the correct order.
Connection to the First Telephone Socket
Notice
Connection to the First Telephone
Socket
If you have multiple telephone sockets for the
same telephone line, the device must be connected to the first telephone socket.
Notice
Outside Line Access Code is Automatically Dialled
Store telephone numbers in the telephone book
at the beginning using R to automatically establish a connection to the public telephone network. By pressing the R key, E appears on the
display.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ TEL.LINE SETUP.
5 Confirm with o. LINE TYPE appears on the display.
6 Select using [ PBX FLASH.
7 Confirm with o.
8 Using [ select whether by pressing the R key, a flash
signal should be triggered or not.
9 Confirm with o.
Connecting Additional
Devices
Additional Devices
You can operate additional devices on a telephone line,
such as cordless telephones, answering machines, modems
or charge counters.
Connection to the Device
You can connect additional devices directly to your device.
1 Insert the telephone cable of the additional device into
the EXT socket (RJ-11-connection) at the bottom of
the device.
Using Additional Telephones
(Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, additional telephones must be set to the tone dialling mode
(DTMF/MFV tones) (for this purpose see the operating
manual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you are
receiving a fax (whistling tone or silence), you can start the
fax reception by pressing ** on the additional telephone.
Changing Code
Changing Easylink Codes!
CAUTION!
Changing Easylink Codes!
Change the code only if it is absolutely necessary. The code must begin with * or # .
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ TEL.LINE SETUP.
5 Confirm with o. LINE TYPE appears on the display.
6 Using [ select REMOTE CONTROL.
7 Confirm with o.
8 Using [ select YES.
9 Confirm with o.
10 Enter the new code for starting fax reception.
11 Confirm with o.
12 You can exit with j.
Notice
Switching Off Function
You can switch this function off, if in step 8 you
select NO, confirm using oand exit using j.
34
Philips · IPF 520 · 525 · 555
Using an External Answering
Machine
Start Automatic Recognition
CAUTION!
For the best operation, the answering machine must be
connected to the EXT socket of the device.
Switching of External Answering Machine
If you are using an external answering machine,
switch this off or disconnect it from the power
supply. If the external answering machine is
switched on, the recognition of the call signal
clock pulse can be disrupted.
Notice
Number of Rings set on External Answering Machine
Make sure that a lower ring tone is set on the
external answering machine than on the device
(setting RINGS NUMBER). Otherwise the
answering machine automatically picks up each
call including faxes.
You can also change the number of rings on the fax device.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Confirm with o. RECEPTION MODE appears on the
display.
3 Select using [ RINGS NUMBER.
4 Confirm with o.
5 Using [ select from the displayed values.
6 Confirm with o.
7 You can exit with j.
Length of Outgoing Message
Notice
Length of Outgoing Message
The outgoing message must be shorter than ten
seconds. Avoid music in your announcement. If
the external answering machine has a “conserving function” (i.e. a function that changes the
number of rings as soon as new messages have
been recorded), deactivate this function.
Answering Machine Records Fax Signals
Notice
Answering Machine Records Fax Signals
If the external answering machine records fax
signals, but your device cannot receive faxes,
inspect the connection of the external answering
machine
Detecting call signal clock
pulse automatically
Type 3 (mit Telefon)
(IPF¦525, IPF¦555)
(Function is not supported in all countries and
networks)
If several call numbers with different call signal clock
pulses are assigned to a telephone line by your network
operator, the device can detect these automatically. This
functions only in the PHONE/FAX or TAD/FAX operating modes.
Function is not supported in all countries and networks
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ DISTINCT. RING.
5 Confirm with o. SET OPTION appears on the display.
6 Select using [ SET PATTERN.
7 Confirm with o. AUTODETECT RING appears on
the display.
8 Call the device with the desired telephone number (the
desired call signal clock pulse), until RING
DETECTED appears on the display of the device.
9 End the call on the caller's device.
10 Press j on the device.
The call signal clock pulse was stored.
Notice
Call Signal Clock Pulse Not Detected
If the call signal clock pulse is not detected by
the device, RING NOT DETECT. appears on
the display. Press j and repeat the process.
Switch on the Call Signal Clock
Pulse
After automatic recognition of the call signal clock pulse,
you must switch on this call signal clock pulse on your
device.
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Select using [ INSTALLATION.
3 Confirm with o. STATION NAME appears on the
display.
4 Select using [ DISTINCT. RING.
5 Confirm with o. SET OPTION appears on the display.
6 Confirm with o.
7 Select using [ YES.
8 Confirm with o.
9 You can exit with j.
Telephone Lines and Additional Devices · Detecting call signal clock pulse automatically
35
EN
11 Service
Changing the Ink Cartridge
EN
3 Press the lock in the centre of the holder towards the
front and lift the cartridge.
Use Original Consumable Materials!
CAUTION!
Use Original Consumable Materials!
Use only original consumable materials. These
are available from a specialised retailer or
through our order service (see back side of this
user manual). Other consumable materials can
cause damage to the device.
For receiving or copying documents, an ink cartridge must
be inserted in your device.
If no cartridge is present or the cartridge is incorrect,
CHECK CARTRIDGE appears on the display.
If the ink in the cartridge is over, CHANGE CARTRIDGE
appears on the display. The ink cartridge cannot be
refilled!
1 Open the control panel, by lifting and folding it up in
the centre. Click the control panel completely in place.
4 Remove the cartridge by pulling it up diagonally forward and taking it out.
CAUTION!
Dispose of Consumable Materials!
Dispose of the empty cartridge according to
the regulations of your country. Handle ink
cartridges carefully to prevent getting ink on
clothing or other objects.
5 Remove the cartridge from the packing and remove the
protective strips.
2 Open the cartridge compartment by pressing on the
upper right corner of the document holder (arrow) and
then carefully lifting it backwards. Click the document
holder completely in place.
6 Insert the cartridge into the holder with the coloured
end facing front and the contacts facing down.
7 Press the cartridge down until it snaps into place.
36
Philips · IPF 520 · 525 · 555
8 Close the device by folding the document holder down
and swivelling the metal bracket upward.
Fixing a Document Jam
1 Open the control panel, by lifting and folding it up in
the centre. Click the control panel completely in place.
2 Carefully pull out the paper.
9 Then close the control panel.
10 NEW PRINT CART.? appears on the display.
11 Press the 1 key if a new cartridge was inserted. A test
page is printed.
12 If there are no breaks in the numbered scale, press 1
when CHECK PRINT OUT appears on the display.
If there are breaks, repeat the process by pressing the
0 key.
3 Close the panel.
Fixing a Paper Jam
1 Fold open the paper feed flap towards front until stop.
2 Carefully pull out the paper.
Cleaning
Instructions for Cleaning!
DANGER!
Instructions for Cleaning!
Unplug the device from the power socket before
cleaning it. Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers (sprays,
abrasives, polishes, alcohol, etc.). Do not allow
any moisture to reach the interior of the device.
3 Close the paper feed flap.
Fax Cleaning Sheets
Notice
Fax Cleaning Sheets
Special fax cleaning sheets are available as accessories from our call centre. Insert a sheet into the
document feeder. Press j; the page is ejected.
Repeat this process at a few times.
Service · Fixing a Paper Jam
37
EN
Cleaning the Scanner
1 Open the control panel, by lifting it in the centre and
folding it to the front.
EN
1 Press MENU. RECEPT. SET-UP appears on the
display.
2 Using [ select CART. MAINTEN..
3 Confirm with o.
4 Using [ select CLEAN CARTRIDGE.
5 Confirm with o.
6 Select using [ YES.
7 The device prints a test page.
If the printing quality is still unsatisfactory, you must manually clean the cartridge.
Cleaning the Cartridge Manually
1 Open the device and remove the cartridge from the
holder.
2 Disconnect the device from the power supply.
3 Clean the contacts (A) with a slightly moistened cloth.
2 Gently wipe the scanner glass behind the panel with a
cloth (A).
DANGER!
Do not touch the print jets (B)!
Do not touch the print jets (B)!
4 Clean the contacts on the holder before reinserting the
cartridge.
3 Close the panel back.
Cleaning the Cartridge
If the quality of the printed documents diminishes, the cartridge must be cleaned.
38
Philips · IPF 520 · 525 · 555
5 Insert the cartridge and close the device.
EN
6 Reconnect the device to the power supply.
7 Enter the date and time.
Power Cycling
If a problem occurs that cannot be corrected with the
instructions in this user manual (see also the help below),
follow the steps given here.
1 Pull out the power plug.
2 Wait at least ten seconds, then plug the power plug
back into the socket.
3 If the problems repeats, please contact our technical
customer service or your retailer. Follow the instructions on the display and in the error report.
Service · Power Cycling
39
Troubleshooting
General Information
EN
SET DATE/TIME appears on the display.
You have to re-set the time and date after a short power failure.
1 Press MENU and o.
2 Enter the date and time with the numeric keys.
3 Confirm with o.
Problems when Faxing or Printing
Faxes sent are of poor quality.
ß Change the resolution and/or the contrast.
ß Clean the scanner.
ß Test the device by making a copy of the document. If
the copy is in order, the fax machine of the recipient
might possibly be defective.
The device produces black lines when sending or printing. Clean the scanner.
Copy is blank.
Insert the documents face up into the document feeder.
Printing is interrupted.
ß Paper or document Jams
ß Paper or print cartridge empty
Follow the instructions on the display.
No printing
Check whether the paper is correctly placed.
Documents are not properly fed.
Clean the scanner.
Problems with the Connection
No dial tone
Check the installation of the device. Connect the telephone
cable to the socket marked LINE. Insert the telephone plug
into your PTT line socket.
Fax transmissions are constantly interrupted.
Try to send the fax manually: Press ß, and dial the number.
If the recipient is using an answering machine, wait until
you hear a whistling tone. Press o.
It is possible that the recipient's device is not ready to receive.
You hear a whistling tone or silence in the handset.
The call is a fax: Press o on the device. Press ** on
the additional telephone. Hang up.
No fax reception
It is possible that the telephone service provider has activated the answering machine function (= voice mail-box) for
your telephone connection. Disabling the Mailbox. Enquire with your telephone service provider.
40
Philips · IPF 520 · 525 · 555
12 Appendix
Technical Data
Dimensions (L¦×¦H¦×¦W) ...................372¦×¦293¦×¦198¦mm
Weight ...................................................................3,5¦kg
Mains Connection.................. 220¦–¦240¦V¦~ / 50¦–¦60¦Hz
Power Consumption
Stand-by Mode..................................................<¦5¦W
Transmission ...................................................<¦25¦W
Recommended Ambient ....................................5¦–¦35¦ºC
Relative Humidity ............... 20¦–¦80¦% (non-condensing)
Connection Type...................................... PSTN · PABX
Dialling Mode Tone / pulse dialling (country dependent)
Guarantee
EN
Dimensions
Weight
Mains Connection
Power Consumption
Stand-by Mode
Transmission
Recommended Ambient
Relative Humidity
Connection Type
Dialling Mode
Standards
Safety........................................................... EN¦60950-1
Emissions ........................................... EN¦55022 Class B
Immunity ........................................................EN¦55024
Safety EN 60950-1
Emissions EN 55022 Class B
Immunity to Electrical Noise EN 55024
Scanner
Scan Width ........................................................ 206¦mm
Vertical Resolution ................... Standard: 3,85 lines/mm
..................................................... Fine: 7,7 lines/mm
Scan Width
Vertical Resolution Standard
Vertical Resolution Fine
Memory
Telephone Book ................................... up to 100 entries
Voice Messages ..................... up to 30 minutes (IPF¦555)
Fax Messages .......... up to 100 pages (standard test letter)
SMS Messages ............................ up to 30 SMS messages
Telephone Book
Voice Messages (Type 2)
Fax Messages
SMS Messages
Paper
Capacity ..........................................................100 sheets
Size.................................................... A4 · 210¦×¦297¦mm
Thickness ................................................ 0,07¦–¦0,11¦mm
Weight .........................................................60¦–¦90¦g/m²
Capacity
Size
Thickness
Weight
Document Feed Slot
Capacity ............................................................20 sheets
Width........................................................ 148¦–¦216¦mm
Length .......................................................100¦–¦600¦mm
Thickness ................................................ 0,06¦–¦0,15¦mm
Capacity
Width
Length
Thickness
Fax
Type .................................................................. Group 3
Compatibility ...............................................ITU-T¦T.30
Data Compression..............................MH · MR · MMR
Modulation .........................V.17 · V.27 · V.27ter · V.29
Transfer Speed................................................ 14.400¦bps
Type Group 3
Compatibility
Data Compression
Modulation
Transfer Speed
Subject to Change
Technical specifications subject to change without notice.
(Terms and Conditions for United Kingdom only)
In order to supply the guarantee, you should contact your
dealer or Sagem Communications Helpdesk. The proof of
purchase will be required.
Please make usage of your equipment for the purpose for
which it was designed and under normal usage conditions.
Sagem Communications do not accept any liability for any
usage made out of the frame of its original designed purpose and any consequence that may arise from this usage.
Should any malfunctioning arise, the dealer or Sagem
Communications Helpdesk will advise you what to do.
A) General Guarantee Conditions
Sagem Communications undertakes to remedy by repair
or exchange at its own convenience, free of charge for
labour and replacement parts, any defects in the equipment during the guarantee period of 12—twelve—months
(3—three—months for accessories), from the date of original invoice of the Equipment, where those defects are a
result of faulty workmanship.
Unless the customer has concluded with Sagem Communications a maintenance contract in respect of the equipment which specifically provides for repairs to be carried
out at the customer's premises, the repairs will not be carried out on the equipment at the customer premises. The
customer must however return the defective equipment at
his/her own expense, to the address given by the dealer or
Sagem Communications Helpdesk.
In case a product needs to be sent in for a repair, it always
has to be accompanied by a proof of purchase (which is not
altered, written on or in any way be made illegible) showing that the product is still under warrantee. In case no
proof of purchase is enclosed, the Sagem Communications
repair center will use the production date as a reference of
establishing the warrantee status of the product.
Apart from all legal obligatory rules, Sagem Communications, do not give any Guarantee, either implicit or explicit
which is not set force in the present section, and could not be
hold responsible for any direct or indirect, material or immaterial damage, in or out of the frame of the present guarantee.
If any provision of this guarantee shall be held to be in
whole or in part invalid or illegal due to an obligatory rule
applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect
the remaining provisions or parts of this guarantee.
This guarantee does not affect the Customer statutory
rights.
B) Exclusions From Guarantee
Sagem Communications shall have no liability under the
guarantee in respect of:
•) Damage, defects, breakdown or malfunction due to one
or more of the following:
Appendix · Technical Data
41
EN
– Failure to properly follow the installation process and
instructions for use
– An external cause to the equipment (including but not
limited to: lightening, fire, shock, vandalism, inappropriate conditions of electrical network or water damage of any
nature)
– Modifications made without the written approval of
Sagem Communications
– Unsuitable operating conditions, particularly of temperature and humidity
– Repair or maintenance of the equipment by persons not
authorized by Sagem Communications
•) Wear and tear from normal daily use of the equipment
and its accessories
•) Damage due to insufficient or bad packaging of equipment when returned to Sagem Communications
•) Usage of new versions of software without previous
approval of Sagem Communications
•) Work on any equipment or software modified or added
without the prior written consent of Sagem Communications
•) Malfunctions not resulting from the Equipment or from
software installed in user workstations for the purpose of
use of the equipment.
Communication problems related to an unsuitable environment including:
– Problems related to access and/or connection to the
Internet such as interruptions by access networks or malfunction of the line used by the subscriber or his correspondent
– Transmission faults (for example poor geographical coverage by radio transmitters, interference or poor line quality)
– The local network fault (wiring, servers, workstations) or
the failure of the transmission network (such as but not
limited to interferences, fault or poor quality of the network)
– Modification of the parameters of the cellular network
carried out after the sale of the Product
•) The normal servicing (as defined in the user guide supplied with the equipment) as well as malfunctioning due to
servicing not being carried out. Servicing costs are in any
event always borne by the customer.
•) Malfunctions resulting from the usage of products, consumables or accessories not compatibles with the equipment.
C) Out of Guarantee Repairs
In the cases set forth in B) as well as after expiry of the guarantee period, the customer must ask the Authorized Sagem
Communications Repair Centre for a cost estimation.
The repair and delivery costs will be invoiced to the customer.
The foregoing shall apply unless otherwise agreed in writing with the customer and only for the United Kingdom.
Helpdesk: 08 45 - 090 03 15
42
The CE symbol confirms conformity with the EU directives that apply to the device.
Declaration of Conformity
(DoC)
Hereby, Sagem Communications Austria GmbH
declares that this IPF¦520, IPF¦525, IPF¦555 is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
You can find the complete Declaration of Conformity on
our website www.sagem-ca.at/doc
WWW
Energy Star 2007
Energy Star
As a participant in the ENERGY STAR programme,
Sagem Communications Austria GmbH has made sure
that this machine complies with the ENERGY STAR
requirements.
Recycling
Packaging: To facilitate packaging recycling, please conform to your local selective recycling rules.
Batteries: Old batteries have to be deposited in designated collection areas.
WEEE
Product: The crossed out dustbin logo on your product
signifies it is classified as Electrical and Electronic Equipment covered by special disposal regulations.
To enforce recycling, recovery of The Waste Electrical and
Electronic Equipment (WEEE) and to protect the environment and human health, European regulations requires
that you selectively collect waste equipment using one of
the following options:
• Your retailer will take your equipment back if you are
buying a replacement product.
• Waste equipment can also be deposited in designated collection areas.
The paper and cardboard packaging used can be disposed
of as recyclable paper. Have the plastic wrapping and Styrofoam packaging recycled or dispose of it in the non-recyclable waste, depending on the requirements in your country.
Philips · IPF 520 · 525 · 555
Trademarks: The references mentioned in this manual
are trademarks of the respective companies. The lack of the
trademarks É and Ë does not justify the assumption that
these dedicated terminologies are free trademarks. Other
product names used herein are for identification purposes
only and may be trademarks of their respective owners.
Sagem Communications disclaims any and all rights in
those marks.
The reproduction of certain documents (e.g. by scanning,
printing, copying) is prohibited in many countries. The
list of such documents below is not intended to be complete, it only offers a general overview. In case of doubt,
consult your legal advisor.
· Passports (personal identification)
· Entrance and exit visa papers (immigration papers)
· Military service documents
· Bank notes, travel checks, payment orders
· Postage stamps, tax stamps (stamped or unstamped)
· Loan papers, certificates of deposit, bonds
· Documents protected by copyright
Follow the statutory regulations of your country with
regard to the legal validity of fax transmissions—particularly in connection with the validity of signatures, meeting
delivery deadlines or disadvantages resulting from the loss
of quality in the transmission, etc.
Take care to maintain the statutory regulations of your
country regarding telecommunications secrecy and data
privacy.
This product is intended for use on an analogue public telecommunications network (PSTN) and in the country
specified on the packaging. Use in other countries can
result in faulty functioning.
For more information, please contact the technical service
centre for your country. Should problems arise during use
of your machine, please contact your retailer first.
Neither Sagem Communications nor its affiliates shall be
liable to the purchaser of this product or third parties for
damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or
abuse of this product or unauthorized modifications,
repairs, or alterations to this product, or failure to strictly
comply with Sagem Communications operating and
maintenance instructions.
Sagem Communications shall not be liable for any damages or problems arising from the use of any options or any
consumable materials other than those designated as original Sagem Communications products or Sagem Communications approved products.
Sagem Communications shall not be held liable for any
damage resulting from electromagnetic interference that
occurs from the use of any interface cables other than those
designated as Sagem Communications products.
All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written
permission of Sagem Communications. The information
contained herein is designed only for use with this product.
Sagem Communications is not responsible, if this information is applied to other devices.
This user manual is a document that does not represent a
contract.
Errors, printing errors and changes are reserved.
Copyright È 2009 Sagem Communications Austria
GmbH
Reproduction Not Permitted
Appendix · Declaration of Conformity (DoC)
43
EN
Customer Information
Introduction 1
Introduction 1
As part of our continuing quest for total customer satisfaction, all of our products are made with ease-of-use and reliability in mind.
In your user manual you will find all the information
required to use your machine. If, after consulting your user
manual, you still require assistance, you should contact our
Call Centre. Our personnel are highly trained specialists
who can ensure that you receive the maximum benefit
from your product.
We can assist your more quickly if you do not call us from
the machine, rather an external telephone. Keep a printout
of the settings as well as the serial number of the machine
handy. The serial number can be found on the type label.
You can order original accessories from our homepage
or—in some countries (see below)—per telephone on our
toll-free number.
Use only original consumable materials. The warrantee
does not cover damages to the device resulting from other
consumables.
Introduction 2
Introduction 3
Introduction 2
United Kingdom
Telephone: 0800 - 358 08 07
E-Mail
E-Mail: dti.faxinfoline@sagem.com
Internet: www.sagem-communications.com
Internet
United Kingdom
Telephone: 08 45 - 090 03 15
Fax: 08 70 - 124 02 02
We hope that you will have lots of joy using your new
product.
Spaltenumbruch
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V.
and are used by SAGEM COMMUNICATIONS under license from Koninklijke Philips Electronics N.V.
SAGEM COMMUNICATIONS
Printing Terminals
Headquarters : Le Ponant de Paris
205, Route de l’Empereur · 92500 Rueil-Malmaison · FRANCE
Tél. : +33 1 57 61 10 00 · Fax : +33 1 57 61 10 01
www.sagem-communications.com
Simplified Joint Stock Company · Capital 158.291.895 € · 440 294 510 RCS Nanterre
IPF 520 · 525 · 555
GB · INT
253041589-D