Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
IRELAND
0818 717 100
Web Site
www.samsung.com/ie
U.K
0845 SAMSUNG (7267864)
www.samsung.com/uk
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
[LC530]BN68-02542D-00Eng.indb 1
BN68-02542D-00
2010-03-05 오전 1:20:55
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Digital TV notice
1.
2.
3.
4.
5.
6.
Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the
possibility to receive DVB-T or DVB-C signal.
DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not
included in this specification. So, they cannot be workable at this moment.
Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C
digital cable broadcasts cannot be guaranteed.
Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be
required to agree to terms and conditions of their business.
Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
For more information, please contact your local Samsung customer care centre.
✎✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the
local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at screen
bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please
follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
✎✎ WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The
most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via
a Set-top Box. To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of
the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always
endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of
the screen. Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long
durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
✎✎ IMPORTANT: Image retention issues are not covered by your Samsung® warranty.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where and how they can take these items
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
2
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,
these substances can cause harm to human health or the environment. To protect natural resources and to promote material
reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
English
[LC530]BN68-02542D-00Eng.indb 2
2010-03-05 오전 1:20:55
Contents
Getting Started
4
4
4
5
6
6
Accessories
Viewing the Control Panel
Viewing the Remote Control
Connecting to an Antenna
Plug & Play (Initial Setup)
Connections
7
8
9
Connecting to an AV Device
Connecting to an Audio Device
Changing the Input source
10
10
10
12
14
16
18
20
How to Navigate Menus
Using the INFO button (Now & Next guide)
Planning Your Viewing
Channel Menu
Picture Menu
Sound Menu
Setup Menu
Support Menu
7
10
Basic Features
Advanced Features
22
Other Information
32
22 Connecting to a PC
23 Media Play
29 Anynet+
32
33
34
34
35
38
39
Analogue Channel Teletext Feature
Installing the Wall Mount
Anti-theft Kensington Lock
Securing the TV to the wall
Troubleshooting
Specifications
Index
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card
Check the Symbol!
t
TOOLS
This function can be used by
pressing the TOOLS button on the
remote control.
Note
One-Touch Button
English
[LC530]BN68-02542D-00Eng.indb 3
3
2010-03-05 오전 1:20:56
Getting Started
Accessories
✎✎Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
✎✎The items’ colours and shapes may vary depending on the models.
✎✎Cables not included in the package contents can be purchased separately
yy Remote Control & Batteries (AAA x 2)
yy Owner’s Instructions
yy Cleaning Cloth
yy Blanking Bracket
See separate guide for installing the stand.
M4 X L12
or
yy Stand (1EA)
yy Guide Stand (1EA)
yy Screws (8EA)
(LE32C530: 7EA)
Viewing the Control Panel
✎✎The product colour and shape may vary depending on the model.
Power Indicator
Speakers
Remote control sensor
Remote control sensor
Aim the remote control towards this spot on the TV.
SOURCEE
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV’s features.
MENU
Power Indicator
Adjusts the volume. In the OSD, use the Y buttons as you would use the
◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Blinks and turns off when the power is on and lights up in standby mode.
P (Power)
Turns the TV on or off.
Y
z
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
4
English
[LC530]BN68-02542D-00Eng.indb 4
2010-03-05 오전 1:20:57
✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and
Volume buttons.
POWER
SOURCE
Displays and selects the available video
sources (P. 9).
Turns the TV on and off.
HDMI
01 Getting Started
Viewing the Remote Control
Selects the HDMI mode directly.
Have direct access to channels.
Alternately selects Teletext, Double or
Mix.
PRE-CH
TTX/MIX
Returns to the previous channel.
Cuts off the sound temporarily.
MUTE
Adjusts the volume.
Changes channels.
CH LIST
Opens the OSD.
MENU
Displays channel lists on the screen
(P. 12).
Displays the EPG (Electronic Programme
Guide) (P. 10).
Displays Media Play (USB) (P. 23).
MEDIA.P
GUIDE
Quickly select frequently used functions.
TOOLS
INFO
Displays information on the TV screen.
RETURN
EXIT
Exits the menu.
Selects the on-screen menu items and
changes the values seen on the menu.
Returns to the previous menu.
These buttons are for the
Channel Manager,
Media Play (USB) menu, etc.
A
B
C
D
I-II
P.MODE
S.MODE
DUAL
AD
P.SIZE
SUBT.
Use these buttons in Media Play(USB)
and Anynet+ (HDMI-CEC)modes
(P.23, 29).
(�: Controls recording for Samsung
recorders that have the Anynet+ feature)
P.MODE: Press to select the picture
mode (p. 14).
S.MODE: Press to select the sound
mode (p. 16).
DUAL I-II: Sound effect selection (p. 18).
AD: Turns the audio description on and
off (p. 17). This is not available in some
locations.
P.SIZE: Selects the picture size (P. 15).
SUBT.: Displays digital subtitles (P. 19).
Installing batteries (Battery size: AAA)
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote control.
Avoid using nearby special fluorescent light or neon signs.
xx The colour and shape may vary depending on the model.
English
[LC530]BN68-02542D-00Eng.indb 5
5
2010-03-05 오전 1:20:57
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎✎Preset: Connecting the mains and antenna.
VHF/UHF Antenna
Cable
or
ANT OUT
1
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎✎To return to the previous step, press the Red button.
1
2
Selecting a language
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Selecting Store Demo or
Home Use
Press the ◄ or ► button, then press the ENTERE button.
• Select the Home Use mode. Store Demo Mode is for retail environments.
• To return the unit’s settings from Store Demo to Home Use (standard): Press the
volume button on the TV. When the OSD volume is displayed, press and hold MENU
for 5 sec.
3
4
5
Selecting a country
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
Selecting an antenna
Press the ▲ or ▼ button, then press the ENTERE button.
Select Air or Cable.
Selecting a channel
Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing
you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel →
Auto Store (p. 12).
6
7
8
Setting the Clock Mode
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTERE button.
Viewing the
HD Connection Guide.
The connection method for the best HD screen quality is displayed.
Enjoy your TV.
Press the ENTERE button.
POWER
P
✎✎ Press the ENTERE button at any time to interrupt the memorization process.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to
change the PIN number, use the Change PIN function.
6
English
[LC530]BN68-02542D-00Eng.indb 6
2010-03-05 오전 1:20:58
Connections
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, STB satellite receiver
(STB)
R
Red
W
DVD /
Blu-ray player
02 Connections
Connecting to an AV Device
DVD /
Blu-ray player
White
HDMI OUT
DVI OUT
R
AUDIO OUT
W
R-AUDIO-L
✎✎HDMI IN 1(DVI), 2, 3, PC/DVI AUDIO IN
xx When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable
connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the
PC/DVI AUDIO IN jacks for audio.
xx If an external device such as a DVD / Blu-ray player / Cable Box / STB satellite receiver supporting a HDMI
versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal colour).
xx If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If the
version is older than 1.3, contact the provider of the corresponding device to confirm the HDMI version and
request an upgrade.
xx It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable
Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver
VCR / DVD
EXT
VIDEO OUT
Y
Y
W
W
AUDIO OUT
R
AUDIO OUT
R
R-AUDIO-L
R
DVD
R
W
Red White
R
Red
B
G
Blue Green
R
W
W
R
B
G
COMPONENT OUT
R-AUDIO-L
PR
PB
Y
R
R
B
G
W
DVD /
Blu-ray player
Y
Red White Yellow
✎✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
✎✎To obtain the best picture quality, the Component connection is recommended over the A/V connection.
English
[LC530]BN68-02542D-00Eng.indb 7
7
2010-03-05 오전 1:20:59
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Headphones Connection
Available devices: digital audio system, amplifier, DVD home theatre
digital audio system
OPTICAL
✎✎DIGITAL AUDIO OUT (OPTICAL)
xx When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
xx When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theatre.
✎✎Headphones H: You can connect your headphones to the headphones output on your set. While the
headphones are connected, the sound from the built-in speakers will be disabled.
xx Sound function may be restricted when connecting headphones to the TV.
xx Headphone volume and TV volume are adjusted separately.
8
English
[LC530]BN68-02542D-00Eng.indb 8
2010-03-05 오전 1:20:59
02 Connections
CONNECTIONS COMMON INTERFACE Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
yy If you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.
yy The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
yy When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.
✎✎NOTE
xx You must obtain a “CI or CI+ CARD” from a local cable service provider.
xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.
xx Insert the “CI or CI+ CARD” in the direction marked on the card.
xx The location of the COMMON INTERFACE slot may be different depending on the model.
xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
xx If you have any problems, please contact a service provider.
xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
Changing the Input source
Edit Name
Source List
Use to select TV or other external input
sources such as DVD / Blu-ray players /
cable box / STB satellite receiver connected
to the TV.
■■ TV / Ext. / AV / Component / PC /
HDMI1/DVI / HDMI2 / HDMI3 / USB
✎✎ In the Source List, connected
inputs will be highlighted.
✎✎ Ext. and PC always stay activated.
SOURCE
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:
Name the device connected to the input jacks to make
your input source selection easier.
✎✎ When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the HDMI IN 1(DVI) port,
you should set to DVI PC mode under Edit Name.
✎✎ When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI) port, you should set to DVI PC or
DVI Devices mode under Edit Name.
English
[LC530]BN68-02542D-00Eng.indb 9
9
2010-03-05 오전 1:21:00
Basic Features
TTX/MIX
PRE-CH
MUTE
How to Navigate Menus
Using the INFO button (Now & Next guide)
Before using the TV, follow the
steps below to learn how to
CH LIST
navigate the menu and select and adjust different functions.
MENU
MEDIA.P
GUIDE
TOOLS
INFO
RETURN
EXIT
3
1
2
4
The display identifies the current channel
INFO
and the status of certain audio-video
settings.
The Now & Next guide shows daily TV
programme information for each channel
according to the broadcasting time.
yy Scroll ◄, ► to view
information for a desired
programme while watching the current channel.
yy Scroll ▲, ▼ to view information for other channels. If you
want to move to the currently selected channel, press
the ENTERE button.
DEF
A
B
C
D
18:11 Thu 6 Jan
DTV Air
1 ENTERE / Direction button: Move the cursor and
select an item. Confirm the setting.
P.MODE S.MODE DUAL I-II
2 RETURN button: Returns to the previous menu.
Life On Venus Avenue
15
3 MENU button: AD
DisplaysP.SIZE
the main SUBT.
on-screen menu.
The access step may differ depending on the selected menu.
1
MENU m
2
3
4
5
▲/▼
6
7
ENTER E
▲/▼
◄/►
ENTER E
EXIT e
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon with the ▲ or ▼
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with
the ▲ or ▼ button.
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERE to complete the
configuration.
Press EXIT.
Information
Guide
The EPG (Electronic Programme Guide)
GUIDE
information is provided by broadcasters.
Using programme schedules provided
by broadcasters, you can specify
programmes you want to watch in
advance so that the channel automatically
changes to the selected programme
channel at the specified time. Programme
entries may appear blank or out of date depending on a
channel status.
Using Channel View
Guide
2:10 Tue 1 Jun
DTV Air 800 five
Home and Away
18:00 - 18:30
Drama
Dani is devastated when scott makes clear his views on marriage...
800 five
Channel View - TV
Today
27
Discovery
28
DiscoveryH&L
800
five
24
price-drop.tv
16
QVC
6
R4DTT
View Mode
1
10
E Watch
Planning Your Viewing
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
18:00 ~ 6:00
Unclassified
No Detaild Information
18:00 - 19:00
American Chopper
Programmes resume at 06:00
Home and...
)Family Affairs
No Information
QVC Selection
No Information
+24 Hours
2
Ch. Mode
3
19:00 - 20:00
Tine Team
Fiv...
)Dark Angel
Information k Page E Watch
4
5
6
English
[LC530]BN68-02542D-00Eng.indb 10
2010-03-05 오전 1:21:01
Guide
2:10 Tue 1 Jun
DTV Air 800 five
Family Affairs
18:00 - 18:30
Drama
Tanya confesses all to a stunned Babs. Conrad is anxious to hear...
800 five
Today
Today
800
800
)Family Affairs
)Dark Angel
Channels: Shows the channel list according to
channel type.
■■
* My Channels: Shows the group of the channel.
■■
Scheduled: Shows all the currently reserved
programmes.
✎✎Using the colour buttons with the Channel Manager.
Scheduled View
18:30
19:15
■■
xx Red (Antenna): Toggle among Air or Cable.
xx B Green (Zoom): Enlarges or shrinks a channel
five
five
03 Basic Features
Using Scheduled View
number.
View Mode
Yellow (Select): Select desired channels and press
the Yellow button to set all the selected channels at
the same time. The c mark appears to the left of
the selected channels.
xx
Blue (Sort): Change the list ordered by channel
name or channel number.
Information E Cancel
1
4
6
1
Red (View Mode): View the list of programmes that
are playing now or coming up.
2
Yellow (+24 Hours): Viewing the list of programmes to
be broadcasted after 24 hours.
3
Blue (Ch. Mode): Select the type of channels you
want to display on the Channel View window. (All, TV,
Radio, Data/Other, My Channel 1~4)
4 Information: Displays details of the selected
programme.
5
xx
(Page): Move to next or previous page.
6 ENTERE button.
–– When selecting the current programme, you can
watch the selected programme.
–– When selecting the future programme, you can
reserve to watch the selected programme. To cancel
the schedule, press the ENTERE button again and
select Cancel Schedules.
xx k (Page): Move to next or previous page.
xx T (Tools): Displays the Channel Manager option
menu. (The options menus may differ depending on
the situation.)
Channel Status Display Icons
Icons
A
c
*
(
\
)
Operations
An analogue channel.
A channel selected.
A channel set as a Favourite.
A programme currently being broadcast.
A locked channel.
A reserved programme.
Channel Manager
Delete or set favourites channels and use the programme
guide for digital broadcasts. Select a channel in the
Channels, My Channels or Scheduled screen.
Channels
Air
c1
2
All
TV
15
Radio
Data/Other
Analogue
3
23
33
32
5
4
27
Antenna
B
Zoom
Select
1futech
* 24ore.tv
abc1
r
BBC World
bid-up.tv
Boonerang
Cartoon Nwk
Class News
\ Coming Soon
Discovery
Sort
k Page T Tools
English
[LC530]BN68-02542D-00Eng.indb 11
11
2010-03-05 오전 1:21:02
Basic Features
Country
¦¦ Using Favourite Channels
The PIN input screen appears. Enter your 4 digit PIN number.
■■ Analogue Channel: Change the country for analogue
channels.
* My Channels
(in Channel Manager)
Shows all favourite channels.
■■ Edit My Channels t : You can set the selected
channels to desired my channels group.
✎✎The “*” symbol will be displayed and the channel will
be set as a my channel.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel in the my channel groups
you want among 1, 2, 3 and 4.
xx One or more groups can be selected.
3. After you have changed the settings, the channel list
for each group can be viewed in my channels.
Channels
Air
c1
2
All
1futech
* 24ore.tv
TV
15
Edit My Channels
abc1
Radio
Data/Other
Analogue
3
23
33
32
5
4
27
Lock
BBC World
Timer Viewing
bid-up.tv
Edit Channel Number
Delete Boonerang
Nwk
Deselect Cartoon
All
Antenna
B
Zoom
Select
r
Class▼News
\ Coming Soon
Discovery
Sort
k Page T Tools
Channel List
You can see all the channels searched.
CH LIST
■■ Digital Channel: Change the country for digital
channels.
Auto Store
Scans for a channel automatically and stores in the TV.
✎✎Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
■■ Antenna Source (Air / Cable): Select the antenna
source to memorise.
■■ Channel Source (Digital & Analogue / Digital /
Analogue): Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital:
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them
in the TV.
If you select Quick, you can set up the Network,
Network ID, Frequency, Modulation and
Symbol Rate manually by pressing the button on
the remote control.
✎✎
Network (Auto / Manual): Select Auto if you want the
TV to automaticity retrieve the Network ID or Manual if
you want to enter ID manually.
Network ID: When Network is set to Manual, you can
assign the Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Manual Store
Scans for a channel manually and stores in the TV.
Channel Menu
¦¦ Retuning Channels
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
12
✎✎If a channel is locked using the Child Lock function,
the PIN input window appears.
■■ Digital Channel: When scanning has finished, channels
are updated in the channel list.
✎✎ When selecting Antenna → Air: Channel,
Frequency, Bandwidth
✎✎ When selecting Antenna → Cable: Frequency,
Modulation, Symbol Rate
■■ Analogue Channel (Programme, Colour System,
Sound System, Channel, Search): If there is abnormal
sound or no sound, reselect the sound standard
required.
English
[LC530]BN68-02542D-00Eng.indb 12
2010-03-05 오전 1:21:03
xx P (programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
xx C (aerial channel mode) / S (cable channel mode):
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
¦¦ Editing Channels
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the TOOLS button.
2. Edit the channel name or number using the
Edit Channel Name or Edit Channel Number menu.
■■ Edit Channel Name (analogue channels only): Assign
your own channel name.
■■ Edit Channel Number (digital channels only): Edit the
number by pressing the number buttons desired.
¦¦ Other Features
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
■■ Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
✎✎ When a digital channel is selected, press the ►
button to view the digital Programme.
■■ Sort (analogue channels only): This operation allows
you to change the programme numbers of the stored
channels. This operation may be necessary after using
the auto store.
■■ Delete: You can delete a channel to display the channels
you want.
■■ Select All / Deselect All: Select all the channels
or deselect all the selected channels in the channel
manager.
Channel List Transfer
The PIN input screen appears. Enter your 4 digit PIN number.
Imports or exports the channel map. You should connect a
USB storage to use this function.
■■ Import from USB: Import channel list from USB.
■■ Export to USB: Export channel list to USB. this function
is available when USB is connected.
Scheduled
(in Channel Manager)
You can view, modify or delete a show you have reserved to
watch.
■■ Change Info: Change a show you have reserved to
watch.
■■ Freq.Start / Freq.Stop: Set the start or stop frequency
(differs in each country)
■■ Cancel Schedules: Cancel a show you have reserved
to watch.
■■ Modulation: Displays available modulation values.
■■ Symbol Rate: Displays available symbol rates.
■■ Information: Display a show you have reserved
to watch. (You can also change the reservation
information.)
Channel Manager
■■ Select All / Deselect All: Select or deselect all reserved
programmes.
Channel Manager Option Menu
Set each channel using the Channel Manager menu options
(Lock / Unlock, Timer Viewing, Sort, Delete, Select All /
Deselect All). Option menu items may differ depending on
the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
■■ Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
03 Basic Features
✎✎Channel mode
Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel
manually.
✎✎Fine tuned channels are marked with an asterisk “*”.
✎✎To reset the fine-tuning, select Reset.
✎✎NOTE
xx This function is available only when the Child Lock
is set to On.
xx The PIN input screen appears. Enter your 4-digit PIN,
the default of which is “0-0-0-0”. Change the PIN
using the Change PIN option.
English
[LC530]BN68-02542D-00Eng.indb 13
13
2010-03-05 오전 1:21:03
Basic Features
Picture Menu
¦¦ Changing the Preset Picture Mode
Mode
Select your preferred picture type.
■■ Dynamic: Suitable for a bright room.
P.MODE
■■ Standard: Suitable for a normal
environment.
■■ Natural: Suitable for reducing eye
strain.
✎✎ Natural is not available in PC
mode.
■■ Movie: Suitable for watching movies in a dark room.
¦¦ Adjusting Picture Settings
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎✎NOTE
xx In analogue TV, Ext., AV modes of the PAL system,
the Tint (G/R) function is not available.
xx In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
xx Settings can be adjusted and stored for each
external device connected to the TV.
¦¦ Economical Solutions
Eco Solution
■■ Energy Saving (Off / Low / Medium / High / Picture
Off / Auto) t : Adjust the brightness of the TV
in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen.
■■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
Min Backlight: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
✎✎
■■ No-Signal Power Off (Off / 15 min / 30 min / 60 min):
To avoid unnecessary energy consumption, set how long
you want the TV to remain on if it’s not receiving a signal.
✎✎ Disabled when the PC is in power saving mode.
¦¦ Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎✎In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off ►
Dynamic Contrast
: Medium
Shadow Detail
: -2
Gamma
:0
RGB Only Mode
: Off
Colour Space
: Native
White Balance
▼
U Move E Enter R Return
■■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■■ Shadow Detail (-2~+2): Increase the brightness of dark
images.
■■ Gamma: Adjust the primary colour intensity.
■■ RGB Only Mode (Off / Red / Green / Blue): You can
adjust Colour or Tint (G/R) of Red, Green or Blue for
the picture from an external device (DVD player, home
theatre, etc.).
■■ Colour Space (Auto / Native): Adjust the range of
colours available to create the image.
✎✎ If you adjust the Backlight, the Eco Sensor will
be set to Off.
14
English
[LC530]BN68-02542D-00Eng.indb 14
2010-03-05 오전 1:21:03
R-Offset / G-Offset / B-Offset: Adjust each colour’s
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,
green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
■■ Edge Enhancement (Off / On): Emphasize object
boundaries.
Picture Options
✎✎In PC mode, you can only make changes to the Colour
Tone, Size and Auto Protection Time.
✎✎
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
Adjusts the Position or Size by using ▲, ▼
button.
✎✎
4:3 : The default setting for a movie or normal
broadcasting.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
✎✎
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
✎✎NOTE
Picture Options
xx Depending on the input source, the picture size
Colour Tone
: Normal ►
Size
: Auto Wide
Screen Mode
: 16:9
Digital Noise Filter
: Auto
MPEG Noise Filter : Auto
HDMI Black Level
: Normal
Film Mode
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using ▲, ▼ buttons.
03 Basic Features
■■ White Balance: Adjust the colour temperature for a
more natural picture.
options may vary.
xx The available items may differ depending on the
selected mode.
xx In PC mode, only 16:9 and 4:3 modes can be
adjusted.
xx Settings can be adjusted and stored for each
external device connected to an input on the TV.
: Off
xx After selecting Screen Fit in HDMI (1080i / 1080p)
▼
U Move E Enter R Return
■■ Colour Tone (Cool / Normal / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎ Settings can be adjusted and stored for each
external device connected to an input on the TV.
■■ Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
P.SIZE
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
xx If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS
(Wide Screen Service) size or the original size. Each
European country requires different picture size.
✎✎ Not available in PC, Component or HDMI mode.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
English
[LC530]BN68-02542D-00Eng.indb 15
15
2010-03-05 오전 1:21:04
Basic Features
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear. Select one
of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels,
displays the intensity of the current signal and defines
the screen noise filter.
Only available for analogue channels.
✎✎
■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
■■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjust the picture for optimum quality.
✎✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■■ Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): If the screen remains idle with a still
image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
ghost images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
Screen
■■ Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust
the picture so that it is aligned to the centre of screen.
■■ Position: Adjust the PC screen position with direction
button (▲ / ▼ / ◄ / ►).
■■ Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
yy The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
yy If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
Sound Menu
¦¦ Setting up the TV with Your PC
Set the input source to PC.
Auto Adjustment t
Adjust frequency values/positions and fine tune the settings
automatically.
✎✎Not available when connecting with an HDMI/DVI cable.
¦¦ Changing the Preset Sound Mode
Mode
■■ Standard: Selects the normal sound
mode.
S.MODE
■■ Music: Emphasizes music over
voices.
■■ Movie: Provides the best sound for
movies.
■■ Clear Voice: Emphasizes voices over
other sounds.
■■ Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
16
English
[LC530]BN68-02542D-00Eng.indb 16
2010-03-05 오전 1:21:04
Equalizer
Adjusts the sound mode (standard sound mode only).
■■ Balance L/R: Adjusts the balance between the right and
left speaker.
■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■■ Reset: Resets the equalizer to its default settings.
¦¦ Sound Systems, Etc.
Audio Description
(not available in all locations) (digital
channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is
sent along with the Main audio from the
broadcaster.
03 Basic Features
¦¦ Adjusting Sound Settings
AD
■■ Audio Description (Off / On): Turn
the audio description function on or
off.
■■ Volume: Adjust the audio description volume.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Virtual Surround (Off / On)
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers or headphones using
HRTF (Head Related Transfer Function) technology.
Dialog Clarity (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
Audio Language
(digital channels only)
Change the default value for audio languages.
■■ Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select (External Speaker /
TV Speaker / Headphone)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎✎When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎✎When Speaker Select is set to External Speaker.
xx TV speaker: Off , External speaker: On
✎✎When Speaker Select is set to TV Speaker.
xx TV speaker: On , External speaker: On
✎✎The available language may differ depending on the
✎✎If there is no video signal, both speakers will be mute.
Audio Format
Additional Setting
broadcast.
(digital channels only)
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the TV Speaker function.
✎✎Audio Format option may differ depending on the
broadcast. 5.1ch Dolby digital sound is only available
when connecting an external speaker through an
optical cable.
(digital channels only)
■■ DTV Audio Level (MPEG / HE-AAC): This function
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
✎✎ According to the type of broadcast signal, MPEG
/ HE-AAC can be adjusted between -10dB and
0dB.
✎✎ To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
English
[LC530]BN68-02542D-00Eng.indb 17
17
2010-03-05 오전 1:21:04
Basic Features
■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)
is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.
✎✎
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
■■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎✎ Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
¦¦ Setting the Time
Time
■■ Clock: Setting the clock is for using various timer
features of the TV.
OO The current time will appear every time you press
the INFO button.
✎✎ If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
✎✎
✎✎ The antenna must be connected in order to set
the time automatically.
Clock Set: Set the Day, Month, Year, Hour and
Minute.
Available only when Clock Mode is set to
Manual.
✎✎
Time Zone (depending on the country): Select your time
zone.
When Country is set to Others, you can use this
function.
Sound Reset (OK / Cancel)
✎✎
Reset all sound settings to the factory defaults.
✎✎ This function is only available when the
¦¦ Selecting the Sound Mode
When you set to Dual f-g, the current
sound mode is displayed on the screen.
Setup Menu
Clock Mode is set to Auto.
DUAL
¦¦ Using the Sleep Timer
■■ Sleep Timer t : Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎✎ To cancel Sleep Timer, select Off.
A2
Stereo
NICAM
Stereo
Audio
Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual f-g
Default
Mono
Stereo ↔ Mono
Dual f ↔ Dual g
Mono
Mono ↔ Stereo
Mono ↔ Dual f
 Dual g 
Automatic
change
Dual f
¦¦ Setting the On / Off Timer
■■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Timer 1
Automatic
change
On Time
Dual f
Off Time
✎✎If the stereo signal is weak and an automatic switching,
18
00
Inactivate
▼
Source
10
Repeat
Once
00
00
Inactivate
Volume
occurs, then switch to the mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the Input source is set to TV.
▲
00
Antenna
TV
Sun
Channel
ATV
Mon
Tue
Wed
L Move U Adjust
1
Thu
Fri
Sat
E Enter R Return
English
[LC530]BN68-02542D-00Eng.indb 18
2010-03-05 오전 1:21:05
✎✎
xx If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
xx When there is only one photo file in the USB
device, the Slide Show will not play.
xx If a folder name is too long, the folder cannot be
selected.
xx Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
The c mark indicates the day is selected.
✎✎
✎✎Auto Power Off (available only when the TV is turned on
by Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
¦¦ Locking Programs
Security
✎✎The PIN input screen appears before the setup screen.
✎✎Enter your 4-digit PIN, the default of which is “0-0-0-0.”
Change the PIN using the Change PIN option.
■■ Child Lock (Off / On): Lock channels in Channel
Manager, to prevent unauthorized users, such as
children, from watching unsuitable programme.
✎✎ Available only when the Input source is set to TV.
■■ Parental Lock: (depending on the country): Prevent
unauthorized users, such as children, from watching
unsuitable programme with a user-defined 4-digit PIN
code. If selected channel is locked, the “\” symbol will
be displayed.
Allow All: Unlock All TV ratings (Not supported in
France).
When Parental Lock is set to 18, the PIN input
screen appears before changing the channels
(France only).
✎✎
03 Basic Features
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select ATV or
DTV.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
NOTE
✎✎ You can block TV programs by set up rating in
Parental Lock as the I (children), T (All public), SC
(Unclassified) and X (X rated). When Parental Lock
is set to X, the PIN input screen always before
changing the channels (Spain only).
■■ Change PIN: Change your personal ID number required
to set up the TV.
✎✎ If you forget the PIN code, press the remote
control buttons in the following sequence, which
resets the PIN to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
¦¦ Other Features
Language
■■ Menu Language: Set the menu language.
■■ Teletext Language: Set a desired language for teletext.
✎✎ English is the default in cases where the selected
language is unavailable in the broadcast.
■■ Preference (Primary Audio Language / Secondary
Audio Language / Primary Subtitle Language /
Secondary Subtitle Language): Select a language,
which will be the default language when a channel is
selected.
Subtitle
Use this menu to set the Subtitle mode.
■■ Subtitle (Off / On): Switches subtitles
on or off.
SUBT.
■■ Mode (Normal / Hearing Impaired):
Sets the subtitle mode.
■■ Subtitle Language: Sets the subtitle
language.
✎✎ If the programme you are watching does not
support the Hearing Impaired function, Normal
automatically activates even if the Hearing
Impaired mode is selected.
✎✎ English is the default in cases where the selected
language is unavailable in the broadcast.
English
[LC530]BN68-02542D-00Eng.indb 19
19
2010-03-05 오전 1:21:06
Basic Features
Digital Text (Disable / Enable)
¦¦ Picture In Picture (PIP)
(UK only)
If the programme broadcasts with digital text, this feature is
enabled.
PIP t
General
■■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.
✎✎NOTE
xx Precautions and limitations for game mode
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
xx Game Mode is not available when the input source
is set to TV or PC.
xx After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
xx If Game Mode is On:
–– Picture mode is set to Standard and Sound mode
is set to Movie.
–– Equalizer is not available.
■■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
✎✎NOTE
xx For PIP sound, refer to the Sound Select
instructions.
xx If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
xx You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
xx PIP settings
Main picture
Component, HDMI1/DVI,
HDMI2, HDMI3, PC
■■ CI Menu: This enables the user to select from the CAMprovided menu. Select the CI Menu based on the menu
PC Card.
■■ Application Info: View information on the CAM inserted
into the CI slot and on the “CI or CI+ CARD” which is
inserted into the CAM. You can install the CAM anytime
whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by
phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
TV
■■ PIP (Off / On): Activate or deactivate the PIP function.
■■ Channel: Select the channel for the sub-screen.
■■ Size (Õ / Ã): Select a size for the sub-picture.
■■ Position (à / – / — / œ): Select a position for the
sub-picture.
■■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
■■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
Common Interface
Sub picture
Support Menu
Self Diagnosis
✎✎Self Diagnostic might take few seconds, this is part of
the normal operation of the TV
■■ Picture Test (Yes / No): Use to check for picture
problems.
■■ Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
✎✎ If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
✎✎ The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
4. Check if you can see a picture on a scrambled signal
channel.
20
English
[LC530]BN68-02542D-00Eng.indb 20
2010-03-05 오전 1:21:06
■■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎✎ If none of these troubleshooting tips apply, contact
the Samsung customer service centre.
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or downloading the latest firmware from samsung.com
to a USB memory device.
Current Version the software already installed in the TV.
✎✎Software is represented as “Year/Month/Day_Version”.
Software Upgrade
Current Version
■■ By Channel: Upgrade the software using the
broadcasting signal.
✎✎ If the function is selected during the software
transmission period, software will be automatically
searched and downloaded.
✎✎ The time required to download the software is
determined by the signal status.
■■ Standby Mode Upgrade: A manual upgrade will be
automatically performed at selected time. Since the
power of the unit is turned on internally, the screen
may be turned on slightly for the LCD product. This
phenomenon may continue for more than 1 hour until
the software upgrade is complete.
03 Basic Features
■■ Signal Information: (digital channels only) HDTV
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
■■ Alternative Software (backup): If there is an issue with
the new firmware and it is affecting operation, you can
change the software to the previous version.
✎✎ If the software was changed, existing software is
displayed.
2009/01/18_000001
HD Connection Guide
By USB
►
By Channel
Standby Mode Upgrade
: 45 Min
Alternative Software
2009/01/15_00000
U Move E Enter R Return
Installing the Latest Version
Refer to this information when connecting external devices
to the TV.
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centres, and how to download
products and software.
■■ By USB: Insert a USB drive
TV Side Panel
containing the firmware
upgrade file, downloaded
from “www.samsung.
com,” into the TV. Please
USB Drive
be careful not to disconnect
the power or remove the
USB drive until upgrades are complete. The TV will be
turned off and on automatically after completing the
firmware upgrade. When software is upgraded, video
and audio settings you have made will return to their
default settings. We advise you to to write down your
settings so that you can easily reset them after the
upgrade.
English
[LC530]BN68-02542D-00Eng.indb 21
21
2010-03-05 오전 1:21:06
Advanced Features
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
DVI OUT
AUDIO OUT
PC OUT
AUDIO OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT / DTV CEA
1920 x 1080p
67.500
60.000
148.500
+/+
✎✎NOTE
xx For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
xx The interlace mode is not supported.
xx The set might operate abnormally if a non-standard video format is selected.
xx Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
22
English
[LC530]BN68-02542D-00Eng.indb 22
2010-03-05 오전 1:21:07
MEDIA.P
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
04 Advanced Features
Media Play
MediaPlay
Videos
SUM
Change Device
View Devices E Enter R Return
¦ Connecting a USB Device
TV Side Panel
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the USB
(HDD) jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select
Media Play.
USB Drive
✎ It might not work properly with unlicenced multimedia files.
✎ Need-to-Know List before using Media Play (USB)
x
x
x
x
MTP (Media Transfer Protocol) is not supported.
The file system supports FAT16, FAT32 and NTFS.
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
x
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
x
x
x
x
x
x
x
Connect a USB HDD to the dedicated port, USB (HDD) port.
x
x
Do not disconnect the USB device while it is loading.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360X8640 pixels.
For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights and interests of the content providers, the
prevention of the illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time.
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
x
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
x
x
x
x
If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
x
The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
English
[LC530]BN68-02542D-00Eng.indb 23
23
2010-03-05 오전 1:21:08
Advanced Features
¦¦ Screen Display
Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is
played.
✎✎Supports the View Devices and Home in Media Play homepage.
Information:
You can ascertain the selected
file name and the number of files
and page.
Videos
/Movie 01.avi
Movie 01.avi
Movie 03.avi
Movie 05.avi
Sort List Section:
Displays sorting standard.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 07.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 09.avi
SUM
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 08.avi
Jan.10.2010
✎✎ Sorting standard is
different depending on the
contents.
1/1 Page
Jan.10.2010
Jan.10.2010
Movie 10.avi
Select
Change Device
File List Section:
You can confirm the files
and groups that is sorted by
each category.
Jan.10.2010
Sorting T Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T Tools: Displays the option menu.
✎✎ Using the � (REW) or µ (FF) button, file list can move to next or previous page.
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file list.
3. Press the ENTERE button or � (Play) button.
–– The selected file is displayed on the top with its playing time.
–– If video time information is unknown, play time and progress bar are not displayed.
–– During playing the video, you can search using the ◄ and ► button.
✎✎In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
yy Supported Subtitle Formats
00:04:03 / 00:07:38
Name
File extension
MPEG-4 time-based text
.ttxt
Format
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
SUM
24
1/1
Movie 01.avi
E Pause L Jump T Tools R Return
English
[LC530]BN68-02542D-00Eng.indb 24
2010-03-05 오전 1:21:09
File Extention
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Divx 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Container
*.avi
*.mkv
AVI
MKV
*.asf
ASF
*.wmv
ASF
*.mp4
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MP4
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
PS
*.ts
*.tp
*.trp
Divx 3.11 / 4.x / 5.1 / 6.0
XVID
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
TS
Audio Codec
MP3 / AC3 / LPCM /
ADPCM / DTS Core
04 Advanced Features
yy Supported Video Formats
MP3 / AC3 / LPCM /
ADPCM / WMA
WMA
MP3 / ADPCM / AAC
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
AC3 / MPEG / LPCM / AAC
AC3 / AAC / MP3 / DD+ /
HE-AAC
Other Restrictions
✎✎ NOTE
xx If there are problems with the contents of a codec, the codec will not be supported.
xx If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
xx Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
xx If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder
Audio Decoder
• Supports up to H.264, Level 4.1
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
• GMC is not supported.
• H.263 is not supported.
• Supports up to WMA 7, 8, 9, STD
• WMA 9 PRO does not support 2 channel excess multi channel or
lossless audio.
• WMA sampling rate 22050Hz mono is not supported.
English
[LC530]BN68-02542D-00Eng.indb 25
25
2010-03-05 오전 1:21:10
Advanced Features
Playing movie file continuously (Resume Play)
If you exit the playing videos function, it can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the � (Play) / ENTERE button.
00:04:03 / 00:07:38
1/1
Movie 01.avi
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎✎ The Blue button is available when resuming play.
✎✎ If the Cont. movie play help function is set to On in the
Play continuously
Resumes playing from the last viewed
scene.
Settings menu, a pop-up message will appear when you
resume play a movie file.
Play continuously E Pause L Jump T Tools R Return
SUM
Music
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
Playlist
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– During playing the music, you can search using the ◄ and ►
button.
–– � (REW) and µ (FF) buttons do not function during play.
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
Music 1
Music 2
No Singer
Music 3
No Singer
01:10 / 04:02
Music 4
No Singer
Music 5
✎✎Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
3/15
No Singer
E Pause L Jump T Tools R Return
SUM
✎✎If the sound is strange when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTERE button or � (Play) button.
–– While a photo list is displayed, press the � (Play) /
ENTERE button on the remote control to start slide show.
–– All files in the file list section will be displayed in the slide show.
–– During the slide show, files are displayed in order from
currently being shown.
✎✎Music files can be automatically played during the Slide Show if
SUM
E Pause L Previous/Next T Tools R Return
the Background Music is set to On.
✎✎The BGM Mode cannot be changed until the BGM has finished
loading.
26
English
[LC530]BN68-02542D-00Eng.indb 26
2010-03-05 오전 1:21:11
Playing the selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
Videos
2 files selected
/Movie 01.avi
1/1 Page
2. Repeat the above operation to select multiple files.
✎✎ NOTE
Movie 01.avi
Movie 02.avi
Jan.10.2010
xx The c mark appears to the left of the selected files.
xx To cancel a selection, press the Yellow button again.
xx To deselect all selected files, press the TOOLS button
Jan.10.2010
Movie 03.avi
Movie 04.avi
Jan.10.2010
Movie 05.avi
Jan.10.2010
Movie 06.avi
Jan.10.2010
Movie 07.avi
Movie 08.avi
Jan.10.2010
and select Deselect All.
Jan.10.2010
Movie 09.avi
Movie 10.avi
Jan.10.2010
3. Press the TOOLS button and select Play Selected Contents.
SUM
Jan.10.2010
04 Advanced Features
¦¦ Playing the Multiple Files
Jan.10.2010
Change Device
Select
Playing the video/music/photo file group
Sorting T Tools
1. While a file list is displayed, move to the any file in desired group.
2. Press the TOOLS button and select Play Current Group.
¦¦ Media Play Additional Function
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Videos
Music
Photos
It shows whole folder. You can view the photo by selecting the folder.
>
>
>
Title
It sorts and displays the file title in Symbol/Number/Alphabet/Special order.
>
>
>
Preference
It sorts and displays the file by preference. You can change the file preference in the file list
section using the Green button.
>
>
>
Latest Date
It sorts and shows files by latest date.
>
Earliest Date
It sorts and shows files by earliest date.
>
Artist
It sorts the music file by artist in alphabetical.
>
Album
It sorts the music file by album in alphabetical order.
>
Genre
It sorts music files by the genre.
>
Mood
It sorts music files by the mood. You can change the music mood information.
>
Monthly
It sorts and shows photo files by month. It sorts only by month (from January to December)
regardless of year.
Basic View
Operations
>
>
>
English
[LC530]BN68-02542D-00Eng.indb 27
27
2010-03-05 오전 1:21:13
Advanced Features
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category
Operations
Videos
Music
Photos
Title
You can move the other file directly.
>
Repeat Mode
You can play movie and music files repeatedly.
>
Picture Size
You can adjust the picture size for preference.
>
Picture Setting
You can adjust the picture setting. (p. 14, 15, 16)
>
Sound Setting
You can adjust the sound setting. (p. 16, 17, 18)
>
Subtitle Setting
You can play the video file with Subtitle. This function only works if the subtitles are the same
file name as the video file.
>
Stop Slide Show /
Start Slide Show
You can start or stop a slide show.
Slide Show Speed
You can select the slide show speed during the slide show.
>
Background Music
You can set and select background music when watching a slide show.
>
Zoom
You can zoom into images in full screen mode.
>
Rotate
You can rotate images in full screen mode.
Information
You can see detailed information about the played file.
>
>
>
>
>
>
>
>
>
Settings
Using the Setup Menu
■■ Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD
registration using Media Play, the registration is completed.
✎✎ For more information on DivX® VOD, visit “www.DivX.com.”
■■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■■ Information: Select to view information about the connected device.
28
English
[LC530]BN68-02542D-00Eng.indb 28
2010-03-05 오전 1:21:13
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
TV
Anynet+
Device 1
HDMI Cable
Home Theatre
HDMI Cable
Anynet+ Device
2, 3
04 Advanced Features
Anynet+
HDMI Cable
Optical Cable
HDMI Cable
1. Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎✎NOTE
xx Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
xx When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
xx Connect only one Home Theatre.
xx You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
xx Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
xx Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English
[LC530]BN68-02542D-00Eng.indb 29
29
2010-03-05 오전 1:21:13
Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stops recording.
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦¦ Setting Up Anynet+
■■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎✎ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
The active source on the TV must be set to TV to use the Anynet+ function.
✎✎
✎✎ Even if an external device is still recording, it may turn off.
¦¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎✎ If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎✎ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
xx Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
xx If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
¦¦ Recording
You can make a recording of a TV Programme using a Samsung recorder.
1. Select Recording.
✎✎ When there are more than two recording devices
xx When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎✎ When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎✎ You can record the source streams by selecting Recording: (device_name).
✎✎ Pressing the � (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎✎ Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
30
English
[LC530]BN68-02542D-00Eng.indb 30
2010-03-05 오전 1:21:14
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎✎ If your receiver supports audio only, it may not appear in the device list.
✎✎ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎✎ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
04 Advanced Features
¦¦ Listening through a Receiver
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎✎NOTE
xx You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
xx The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
xx The Anynet+ functions do not operate with other manufacturers’ products.
¦¦ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver (home theatre).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
• Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
• Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press P >/<, and PRE-CH to change the TV mode. (Note that the channel button operates only when a
tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
• You cannot use the play function when Plug & Play (Initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
The TV Programme cannot be
recorded.
• Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
English
[LC530]BN68-02542D-00Eng.indb 31
31
2010-03-05 오전 1:21:14
Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎✎You can change Teletext pages by pressing the numeric buttons on the remote control.
1 / (Teletext on/mix): Activates
the Teletext mode for the current
channel. Press it twice to overlap
the Teletext display onto the
current broadcasting screen.
2 8 (store): Stores the Teletext
pages.
3 4 (size): Displays the teletext
on the upper half of the screen in
double-size. To move the text to
the lower half of the screen, press
it again. For normal display, press
it once again.
4 9 (hold): Holds the display at
the current page, in the case that
there are several secondary pages
that follow automaticially. To undo,
press it again.
5 Colour buttons (red, green, yellow,
blue): If the FASTEXT system
is used by the broadcasting
company, the different topics on
a Teletext page are colour-coded
and can be selected by pressing
the coloured buttons. Press the
colour corresponding to the topic
of your choice. A new colourcoded page is displayed. Items
can be selected in the same way.
To display the previous or next
page, press the corresponding
coloured button.
6 0 (mode): Selects the Teletext
mode (LIST/ FLOF).
If pressed during LIST mode,
switches the mode to List save
mode. In List save mode, you can
save a Teletext page into a list
using the 8(store) button.
7 1 (sub-page): Displays the
available sub-page.
32
POWER
1
SOURCE
PRE-CH
TTX/MIX
6
7
8
2
2 (page up): Displays the next
Teletext page.
3 (page down): Displays the
previous Teletext page.
6 (index): Displays the index
(contents) page at any time while
you are viewing Teletext.
5 (reveal): Displays the hidden
text (answers to quiz games, for
example). To display the normal
screen, press it again.
7 (cancel): Shrinks the Teletext
display to overlap with the current
broadcast.
8
9
0
!
@
9
CH LIST
Typical Tetetext page
MENU
0
3
4
5
TOOLS
INFO
!
RETURN
EXIT
@
A
B
C
D
Part
A
B
C
D
E
F
Contents
Selected page
number.
Broadcasting channel
identity.
Current page number
or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
English
[LC530]BN68-02542D-00Eng.indb 32
2010-03-05 오전 1:21:14
05 Other Information
Installing the Wall Mount
Assembling the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
Blanking Bracket
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xx Standard dimensions for wall mount kits are shown in the table below.
xx When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xx Do not use screws that do not comply with the VESA standard screw specifications.
xx Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
xx For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
xx Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xx Do not mount the TV at more than a 15 degree tilt.
Product Family
inches
19~22
LCD-TV
23~29
30~40
46~55
57~65
70~80
80~
VESA Spec. (A * B)
75 X 75
100 X 100
200 X 100
200 X 200
400 X 400
600 X 400
800 X 400
1400 X 800
Standard Screw
Quantity
M4
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
English
[LC530]BN68-02542D-00Eng.indb 33
33
2010-03-05 오전 1:21:15
Other Information
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance and
locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
1
TV Rear
2
✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside
3
the “K” icon.
1. Insert the locking device into the Kensington slot 1 on the LED TV and
turn it in the as shown 2.
<Optional>
2. Connect the Kensington Lock cable 3.
3. Fix the Kensington Lock to a desk or a heavy stationary object.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on the
TV model.
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and
safety, install the anti-fall device as follows.
¦¦ To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎ You may need additional material such as an anchor depending on
the type of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎✎ Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
✎✎ Screw Specifications
xx For a 19 ~ 29 inch : M4
xx For a 30 ~ 40 inch : M6
xx For a 46 ~ 80 inch : M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.
✎✎ NOTE
Wall
xx Install the TV near to the wall so that it does not fall backwards.
xx It is safe to connect the string so that the clamps fixed on the
wall are equal to or lower than the clamps fixed on the TV.
xx Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt about
the security of your connections, contact a professional installer.
34
English
[LC530]BN68-02542D-00Eng.indb 34
2010-03-05 오전 1:21:16
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues
Solutions and Explanations
Picture Quality.
First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (p. 20)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it
did in the store.
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component
cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto programme.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and
definition of the signal.
The picture is distorted: macro block error,
small block, dots, pixelization.
• Compression of video contents may cause picture distortion especially in fast moving pictures such
as sports and action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
Colour is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.
• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
(p.14)
• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution Energy Saving) (p.14)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
(p.16)
There is a dotted line on the edge of the
screen.
• If the picture size is set to Screen Fit, change it to 16:9 (p. 15).
• Change cable/set top box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected with a cable box, please try to reset the cable box. Reconnect hte AC cord and wait until
the cable box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (p. 20)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
• Please check the volume the of external device connected to your TV.
The picture is good but there is no sound.
• Set the Speaker Select option to TV Speaker in the sound menu (p. 17).
• If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For antenna or Cable connections, check the signal strength. Low signal level may cause sound
distortion.
English
[LC530]BN68-02542D-00Eng.indb 35
05 Other Information
Troubleshooting
35
2010-03-05 오전 1:21:16
Other Information
Issues
Solutions and Explanations
No Picture, No Video
The TV won’t turn on.
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “The remote control does not work” below.
The TV turns off automatically.
•
•
•
•
There is no picture/Video.
• Check cable connections (remove and reconnect all cables connected to the of TV and external
devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be connect
to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
Ensure the Sleep Timer is set to Off in the Setup menu. (p. 18)
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if
there is no signal.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU Setup - Plug & Play (Initial setup) and wait for all avaiable channels to be stored (p. 6).
• Verify the Antenna is positioned correctly.
The picture is distorted: macro block error
small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported” message
appears.
• Set your PC’s output resolution and frequency so they matche the resolutions supported by the TV
(p. 22).
“PC” is always shown on the source list,
even if a PC is not connected.
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
The video is OK but there is no audio.
• If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture won’t display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from
your TV.
• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
manual for the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV, and adjust the external device’s output resolution
accordingly. Refer to the resolution settings on page 22 of this manual.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
The TV Signal Information is unavailable
in the Self Diagnostic Test menu.
• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 21).
36
English
[LC530]BN68-02542D-00Eng.indb 36
2010-03-05 오전 1:21:16
Solutions and Explanations
The TV is tilted to the side.
• Remove the base stand from the TV and reassemble it.
The channel menu is greyed out.
(unavailable)
• The Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial
setup) → ENTERE (p. 6).
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
• This is part of the product’s design and is not a defect.
The PIP menu is not available.
• PIP functionality is only available when you are using a HDMI, PC or components source (p. 20).
The message “Scramble signal” or “Weak
Signal/No Signal” appears.
• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.
You turned the TV off 45 minutes ago, and
it turned on again.
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
downloaded whilst your watching TV.
There are recurrent picture/sound issues.
• Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
05 Other Information
Issues
✎✎This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
¦¦ Licence
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that
plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-onDemand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
Pat. 7,295,673; 7,460,688; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
English
[LC530]BN68-02542D-00Eng.indb 37
37
2010-03-05 오전 1:21:17
Other Information
Specifications
Panel native
1920 x 1080 @ 60 Hz
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
TV System
Analogue: B/G, D/K, L, I (Depending on your country selection)
Digital: DVB-T/DVB-C
Colour/Video System
Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Sound System
BG. OK NICAM. MPEGl
HDMI IN 1 ~ 3
Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.
Analogue audio input (HDMI IN1 only)
PC input (HDMI IN1 only)
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Model Name
LE32C530
LE37C530
LE40C530
LE46C530
Screen Size
(Diagonal)
32 inches
37 inches
40 inches
46 inches
Sound
(Output)
10W x 2
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
783 X 76 X 498 mm
783 X 220 X 536 mm
902 X 77 X 562 mm
902 X 240 X 614 mm
970 X 79 X 600 mm
970 X 240 X 652 mm
1102 X 79 X 676 mm
1102 X 260 X 733 mm
9 kg
11 kg
11kg
14 kg
14 kg
17 kg
17 kg
21 kg
✎✎Design and specifications are subject to change without prior notice.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.
38
English
[LC530]BN68-02542D-00Eng.indb 38
2010-03-05 오전 1:21:17
A
Amplify
Anynet+
Auto Adjustment
Auto Volume
F
16
29
16
17
B
Background Music
Balance L/R
Basic View
Batteries
Black Tone
Blanking Bracket Brightness
28
17
27
5
14
33
14
19
12
18
15
7
22
8
8, 29
28
22
14
14
7, 29
8
8, 29
I
Installation Space
Language
Licence
Lock
2
14
9
13
14
17
17
19
37
13
M
Media Play
Melody
Menu Transparency
Music
23
20
20
26
N
Navigate 10
O
Optimal resolution
E
Eco Sensor
Edit Name
Editing Channels Energy Saving
Equalizer
External Speaker
HDMI
Headphones
Home Theatre
L
D
DIGITAL AUDIO OUT
DivX® VOD
D-sub
Dynamic
Dynamic Contrast
16
13
15
12
H
C
Change PIN
Channel Menu
Clock
Colour Tone
Component
Connecting to a PC
Connecting to an Audio Device
Film Mode
Fine Tune
Flesh Tone
Frequency
R
31
30
5
28
14
28
S
Select All
Self Diagnosis
Sharpness
Signal Information
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
Specifications
Standby mode
Subtitle
Symbol
13
20
14
21
18
26
21
9
17
38
4
19
3
T
Timer
Title
Tools
Troubleshooting
TV Speaker
18
27
3
35
17
U
22
P
Photos
Picture Size
PIP (Picture in Picture) Plug & Play
Power Indicator
Receiver
Recording
Remote Control
Repeat Mode
RGB Only Mode
Rotate
05 Other Information
Index
USB Drive
21, 23
V
26
15
20
6
4
VCR Video Formats
Videos
Virtual Surround Volume
7
25
24
17
4
W
Wall Mount
Warm White Balance 33
15
14
English
[LC530]BN68-02542D-00Eng.indb 39
39
2010-03-05 오전 1:21:18
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to
install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). THERE ARE
NO USER SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any kind
of contact with any internal part of this product.
This symbol alerts you that important literature
concerning operation and maintenance has
been included with this product.
yy The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.To ensure reliable
operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
–– Do not cover the slots and openings with a cloth or other materials.
–– Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
–– Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
–– Give your product 10 cm (4 inch) clearance from the wall.
yy Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
yy Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the product.
yy Do not place a water containing vessel on this apparatus, as this can result in a risk of fire or electric shock.
yy Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer
immediately. Make sure to pull out the power cord from the outlet before cleaning.
yy This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly
under environmental considerations. Please contact your local authorities for disposal or recycling information.
yy Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
yy Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.
yy To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the set due to lightning and power line surges.
yy Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor
corresponds to the local electrical supply.
yy Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.
yy To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
yy Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug
when pulling the plug from the outlet. Do not touch the power cord with wet hands.
yy If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it
immediately and contact an authorized dealer or service centre.
yy Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended
period of time (especially when children, elderly or disabled people will be left alone in the house).
–– Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and
heat or the insulation to deteriorate.
yy Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low
temperatures,high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc.
Failure to do so may cause serious damage to your set.
yy Use only a properly grounded plug and receptacle.
–– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
yy To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall
be readily operable.
yy Do not allow children to hang onto the product.
yy Store the accessories (battery, etc.) in a location safely out of the reach of children.
yy Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.
yy Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.
WARNLNG - TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES OR OTHER OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
[LC530]BN68-02542D-00Eng.indb 40
2010-03-05 오전 1:21:18
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on
the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of
the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitably approved extension lead or consult your dealer for assistance. However, if there is no alternative but to
cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows :
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire
coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
United Kingdom
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective
materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from
whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will
comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our
Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd.
Customer Care Centre
PO Box 17243
Edinburgh, EH11 4YB
United Kingdom
Tel: 0845 SAMSUNG (7267864) (UK & Northern Ireland)
Tel: 0818 717 100 (EIRE Only)
Fax: +44 0845 650 8080
Web : www.samsung.com
WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and
is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been
defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement
will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products
caused by such repair work will not be covered by this warranty.
4. This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in
order to conform to national or local technical or safety standards in force in any country other than the one for which the
product was originally designed and manufactured.
[LC530]BN68-02542D-00Eng.indb 41
2010-03-05 오전 1:21:18