Premier UFP-420 Installation Instructions

Add to my manuals
2 Pages

advertisement

Premier UFP-420 Installation Instructions | Manualzz

UFP-420

UFP-420 INSTALLATION INSTRUCTIONS

Westinghouse (LTV-30W2) -

M4 x 20mm Phillips Head Screws (Qty 4); M4 Flat Washer (Qty 4); Flat Washer (Qty 16)

Mounting

Bracket

(Qty 1)

ViewSonic (N325W) –

M6 x 20mm Phillips Head Screws (Qty 4); Flat Washer (Qty 16)

Sony (KDLV40XBR1) –

M5 x 16mm Phillips Head Screws (Qty 4)

NOTE: For the Westinghouse and Viewsonic displays, the following spacers must be used:

Westinghouse –One M4 Flat Washer must be used with each screw (between the screw and the adapter plate) for a total of four M4 Flat Washers. Four flat washers must be placed between the adapter plate and the display (four per screw; sixteen total).

ViewSonic –Four flat washers must be placed between the adapter plate and the display (four per screw; sixteen total).

1. Invert the flat panel display and place it on a soft, flat surface.

2. Locate the four (4) mounting points that are found on the back of the flat panel display (Figure 1).

3. Align the UFP-420 to the flat panel display mounting points.

4. Use the four (4) M4 x 20mm Phillips head screws to secure the UFP-420 to the flat panel display

(Figure 2). Be sure to place the ¼” nylon washer between the bracket and the display. Do not overtighten.

5. Mount the flat panel display to the LCD mount that was purchased, following the supplied instructions.

Page - 1 -

Figure 1

Mounting Point

Installation Instructions

¼” Nylon

Washer

UFP-420

Figure 2

Display

M4 x 20mm Phillips Head

Screws

UFP-420

Page - 2 - Installation Instructions

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement