DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 1
Gift Style
1080P Up-Scaling DVD Player
DN899
As an ENERGY STAR® Partner,
LG has determined that this
product or product models meet
the ENERGY STAR® guidelines for
energy efficiency.
ENERGY STAR® is a U.S. registered mark.
© Copyright 2008, LG Electronics U.S.A., Inc.
For service/
support Call:
Toll Free Number
1-800-243-0000
(http://us.lgservice.com)
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 2
Introduction
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such a bookcase
or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating.
The openings should be never be blocked by placing the product on a bed,
sofa, rug or other similar surface.This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instruction have been adhered to.
CAUTION: The apparatus should not be exposed to water (dripping or
splashing) and no objects filled with liquids, such as vases, should be placed on
the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part by an authorized
servicer.
2
Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the appliance.
To disconnect power from the unit, pull out the units power cord from the outlet.
When installing the product, ensure that the plug is easily accessible.
FCC WARNING: This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the product is operated in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
DO NOT ATTEMPT TO MODIFY THIS PRODUCT IN ANY WAY WITHOUT
WRITTEN AUTHORIZATION FROM LG ELECTRONICS CORPORATION.
UNAUTHORIZED MODIFICATION COULD VOID THE USER’S AUTHORITY
TO OPERATE THIS PRODUCT.
THIS EQUIPMENT IS INTENDED TO RECEIVE AND DECODE SIGNALS
TRANSMITTED ACCORDING TO ATSC DIGITAL TELEVISION STANDARD
A/53, SPECIFICATION AND IS INTENDED TO BE USED WITH AN
APPROPRIATE ANTENNA AND DISPLAY DEVICE THAT YOU MUST
PROVIDE.
FCC COMPLIANCE: The responsible party for this product’s compliance is:
Marketed and Distributed by LG Electronics U.S.A., Inc.,
1000 Sylvan Avenue, Englewood Cliffs, NJ.
Phone: 1-201-816-2000.
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 3
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE
MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures
for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
1. Read these instructions. – All these safety and operating instructions
should be read before the product is operated.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/product combination to avoid injury from
tip-over.
2. Keep these instructions. – The safety, operating and use instructions
should be retained for future reference.
3. Heed all warnings. – All warnings on the product and in the operating
instructions should be adhered to.
4. Follow all instructions. – All operating and use instructions should be followed.
5. Do not use this apparatus near water. – For example: near a bath tub,
wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water.
6. Clean only with dry cloth. – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it from
over- heating. The openings should never be blocked by placing the product on
a bed, sofa, rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the product has been exposed to rain or
moisture, does not operate normally, or has been dropped.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
3
Contents
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12
Playing MPEG4 movie file . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
Listening to Music Disc or files . . . . . . . . . . . . . . . . . . . . . . . . .13
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-14
Using an USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Types of Playable Discs
Type
Logo
DVD-VIDEO: Discs such as movies that can be
purchased or rented
DVD-RW: VR mode, Video mode and finalized only
Audio CD: Music CDs or CD-R/CD-RW in music CD
format that can be purchased
This unit plays DVD±R/RW and CD-R/RW that contains audio titles, MPEG4,
MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/CD-R cannot
be played on this unit due to the recording quality or physical condition of the
disc, or the characteristics of the recording device and authoring software.
About the
Symbol Display
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that disc.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
• Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
• If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. “This product incorporates copyright protection
technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.”
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Manufactured under license from Dolby Laboratories. “Dolby”and the
double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
4
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 5
Hooking up the unit
Hooking up the unit - more you can do
Audio and Video Connection
A S-Video connection
The unit Audio/Video jacks are color coded (yellow for video, red for right audio
and white for left audio). If your TV has only one input for audio (mono),
connect it to the left (white) audio jack on the unit.
Connect the S-VIDEO OUTPUT jack on the unit to the corresponding input
jacks on your TV using a S-Video cable.
You will still need to connect the left and right audio cables to the TV, or
digital audio cable to your stereo.
Caution : You must set the [TV Output Select] option to [S-Video] on the
setup menu to use this connection. (See page 9)
B Component Video Connections
Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the
unit to the corresponding input jacks on your TV using a YPbPr cable.
• You will still need to connect the left and right audio cables to the TV, or
digital audio cable to your stereo.
Caution : You must set the [TV Output Select] option to [YPbPr] on the
setup menu to use this connection. (See page 9)
Resolution Setting
• You can change the resolution for component video output. Press
RESOLUTION repeatedly to select the desired resolution - 480i,
480p, 720p, 1080i, 1080p.
• For 720p,1080p and 1080i resolution on the component video output, only
non-copy protected discs can be played back. If the disc is copy
protected,it will be displayed at the 480p resolution.
• Depending on your TV, some of the resolution settings may result in the
picture disappearing or an abnormal picture appearing. In this case, press
RESOLUTION repeatedly until the picture re-appears.
C
C Digital Audio Output Connection
Connect the AC
power cord into the
power outlet.
A
B
Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jack to the
corresponding jack on your amplifier.
• If the audio format of the digital output does not match the capabilities of
your amplifier, the amplifier will produce a strong, distorted sound or no
sound at all.
• To see the audio format of the current disc in the on-screen display, press
AUDIO.
• This unit does not perform internal (2 channel) decoding of a DTS sound
track. To enjoy DTS multi channel surround, you must connect this unit to
a DTS compatible amplifier via one of this unit’s digital audio outputs
5
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 6
Hooking up the unit
HDMI Connection
Connect the HDMI OUTPUT jack on the unit to the HDMI input jack on an
HDMI compatible TV using an HDMI cable.
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a
single digital connection for use with DVD Players, Set-Top Boxes, and other AV
devices. HDMI was developed to provide the technologies of HDCP (High-bandwidth Digital Content Protection). HDCP is used to protect digital content
transmitted and received.
HDMI has the capability to support standard, enhanced or high-definition video
plus standard to multi-channel surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one
connector (instead of several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
Notes on HDMI connection
Hooking up the unit - more you can do
Resolution Setting
You can change the resolution for HDMI output. Press RESOLUTION
repeatedly to select the desired resolution - 480i, 480p, 720p, 1080i, 1080p.
Note for 1080p resolution
The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in
the market today. However, there are some 1080p TVs available from certain
companies that are limited in the types of 1080p images that can be accepted.
Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display
an image from this unit.
6
• If your TV is not capable of handling 96 kHz sampling frequency, set the
[Sampling Freq.] option to [48 kHz] on the setup menu (See page 9).
• If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital and [MPEG] options to [PCM] on the setup menu (See page 9).
• Depending on your TV, some of the resolution settings may result in the
picture disappearing or an abnormal picture appearing. In this case, press
RESOLUTION repeatedly unit the picture re-appears.
• Changing the resolution when the unit is connected with HDMI connector
may result in malfunctions. To solve the problem, turn off the unit and then
turn it on again.
• When you connect a HDMI or DVI compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and this unit. Next, switch on the
HDMI/DVI device and leave it for around 30 seconds, then switch on this
unit.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720x480i, 720x480p, 1280x720p,
1920x1080i or 1920x1080p video input.
- The 1080p, 720p and 480p resolutions are the progressive scan applied
resolution
• Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Remote control
Page 7
a
b
c
a
b
Put the battery into the Remote Control
Pinch the battery holder clip together then pull the
tab to remove the battery holder. Insert the battery
with the + facing in the same direction as the +
on the battery holder. Replace the battery holder
with battery into the Remote Control unit making
sure that it is fully inserted.
• Replace Remote Control unit battery with 3V
micro lithium cells such as CR. 2025 or its equivalent.
• Dispose of battery safety in accordance with local
laws. Do not dispose of in fire.
SCAN (m / M) : Search backward or forward.
SKIP (. / >) : Go to next or previous
chapter/track.
PAUSE/STEP (X) : Pauses playback
temporarily/press repeatedly for frame-by-frame
playback.
PLAY (N) : Starts playback.
STOP (x) : Stops playback.
d
POWER (1) : Switches the unit ON or OFF.
OPEN/CLOSE (Z) : Opens and closes the disc
tray.
AUDIO (
) : Selects an audio language or audio
channel.
SUBTITLE (
) : Selects a subtitle language.
ANGLE (
) : Selects a DVD camera angle, if
available.
SETUP : Accesses or exits the setup menu.
c
DVD MENU : Accesses the DVD menu.
TITLE : Accesses the disc’s title menu, if available.
l r o b : Navigates the menus.
ENTER ( ) : Confirms menu selection.
DISPLAY : Accesses On-Screen Display.
RETURN (O) : Press to move backwards in the
menu or exit the menu. Change the USB mode.
d
Numerical buttons: Selects numbered items in a
menu.
CLEAR : Removes a track number on the Program
List.
PROGRAM : Enters the program edit mode.
A-B : Repeats a section.
REPEAT : Repeats a chapter, track, title or all.
ZOOM : Enlarges video image.
RESOLUTION : You can change the resolution
depending on your TV.
Warning for replaceable lithium battery
• Danger of explosion if battery incorrectly
replaced.
• Replace only with the same type battery.
• Additional warning marking close to the battery if
intended to be replaced by users.
Warning : The battery used in this device may
present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or
heat above 100 °C (212 °F).
Replace the battery with Matsushita Elec. Ind.
Co., Ltd. (Panasonic), part no. CR. 2025 only.
Use of another battery may present a risk of fire
or explosion. Dispose of used batteries. Keep batteries away from children. Do not disassemble or
dispose of in fire.
7
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 8
Main Unit
a
b
c
e
a 1/I (Power)
Turn the unit ON or OFF.
c Disc Tray
Insert a disc here.
b • Z (Open / Close)
Opens or closes the disc tray.
d Display window
Shows the current status of the unit.
• N (Play)
Starts playback.
e Remote sensor
Point the remote control here.
• x (Stop)
Stops playback.
f USB Port
Connect an USB Flash Drive.
• . (Skip)
Returns to the beginning of current chapter or track or go to
the previous chapter or track.
• > (Skip)
Go to next chapter or track.
8
d
f
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 9
Adjust the display settings
Adjust the settings
ON REMOTE
1 Display setup menu:
SETUP
2 Select a desired option on the first level:
vV
3 Move to second level:
B
4 Select a desired option on the second level:
vV
5 Move to third level:
B
6 Change the setting:
v V / ENTER
Adjust the settings - more you can do
When you turn on for the first time
The menu for a language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use vV b B to select a
language then press ENTER and the confirm menu will appear. Use b B to
select [Enter] then press ENTER.
Adjust the language settings
Menu Language – Select a language for the Setup menu and on-screen
display.
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/
Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list.
(see page 15) If you make a mistake while entering number, press CLEAR to
delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
TV Output Select – Select an option according to the TV connection type.
[YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE
SCAN OUTPUT jacks on the unit.
[S-Video]: When your TV is connected with the S-Video jack.
Adjust the audio settings
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITAL AUDIO OUTPUT jack.
[Bitstream]: Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG
decoder.
[PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s
DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital
or MPEG decoder.
[Off] (for DTS): Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an amplifier without a built-in DTS decoder.
Sample Freq. (Frequency) – Selects the sampling frequency of the audio
signal.
[48 KHz]: The audio signals are always converted to 48 kHz.
[96 KHz]: The audio signals are output in their original format.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The
karaoke channels on the disc mix into normal stereo sound.
9
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 10
Adjust the lock settings
You must set the [Area Code] option to use the lock options. Select [Area Code]
option then press B. Enter a 4-digit password then press ENTER. Enter it again
then press ENTER to verify. If you make a mistake while entering number, press
CLEAR then correct it.
If you forget your password you can reset it. First, remove the disc in the unit.
Display setup menu then input the 6-digit number “210499”. The “P CLR”
appear in the display window and the password is deleted.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digits password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Displaying Disc Information
ON REMOTE
1 Press DISPLAY:
DISPLAY
2 Select a item:
vV
3 Adjust the Display menu settings:
b B / ENTER
4 To return the exit:
DISPLAY
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
pressing b B.
Area Code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. (See page 15)
Current title (or track) number/total number of titles (or tracks)
Current chapter number/total number of chapters
Elapsed playing time
Adjust the others settings
Selected audio language or channel
B.L.E. (Black Level Expansion) – To select the black level of playback
pictures. Set your preference and monitor’s ability.
Selected subtitle
Selected angle/total number of angles
Symbol Used in this Manual
ALL
DVD
MP3
MPEG4
10
All discs and file listed below
ACD
Audio CDs
DVD and finalized DVD±R/RW
CD-G
CD-G discs
MP3 files
WMA
WMA files
MPEG4 files
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 11
Pause a playback
Playing a Disc
ON REMOTE
OPEN/CLOSE
Frame-by-Frame playback
OPEN/CLOSE
Playing repeatedly
1 Open the disc tray:
Z
2 Insert a Disc:
-
3 Close the disc tray:
Z
4 Start playback:
N
PLAY
5 To stop playback:
x
STOP
Playing a Disc - more you can do
Stops the playback
x ” appears on
The unit records the stopped point depending on the disc. “ Xx
the screen briefly. Press PLAY ( N) to resume playback (from the scene
x ) again or unload the disc (“ x ” appears on the
point). If you press STOP (x
screen), the unit will clear the stopped point.
Xx = Resume Stop, x = Complete Stop) The resume point may be cleared
(X
when a button is pressed (for example :POWER, OPEN/CLOSE, etc).
Playing a DVD that has a menu
DVD
Most DVD now have menus which load first before the film begins to play. You
can navigate these menus using vV b B or number button to highlight an
option. Press ENTER to select.
Playing a DVD VR disc
This unit will play DVD-RW disc that is recorded using the Video Recording
(VR) format. When you insert a disc DVD VR disc, the menu will appear on the
screen. Use vV to select a title then press PLAY ( N). To display DVD-VR
menu, press DVD MENU or TITLE.
Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player
does not support these kinds of discs.
Skip to the next/previous chapter/track
ALL
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue
playback.
ALL
Press SKIP (>) to move to the next chapter/track.
Press SKIP (.) to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the previous chapter/track.
DVD
MPEG4
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
ALL
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [Off].
Fast forward or fast reverse
DVD
MPEG4
ACD
WMA
MP3
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the various playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY ( N) to continue play at normal speed.
Repeating a specific portion (A-B)
DVD
MPEG4
ACD
Press A-B at the beginning of the portion you wish to repeat and again at the
end of the portion. Your selected portion will be repeated continually.
To return to normal playback, press A-B to select [Off].
Selecting a subtitle language
DVD
MPEG4
During playback, press SUBTITLE (
language.
) repeatedly to select a desired subtitle
Watching from a different angle
DVD
If the angle indicator appears on the screen for a moment, you can select a
different camera angle by pressing ANGLE ( ) repeatedly.
Hearing a different audio
DVD
MPEG4
CD-G
During playback, press AUDIO ( ) repeatedly to switch between the available
audio languages, channels or encoding methods.
Slow down the playing speed
MPEG4 (Forward only) DVD
While playback is paused, press SCAN (m or M) to slow down reverse or
forward playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal
speed.
11
DV4M2H-N.BUSALLK_ENG
9/11/08
Watching a enlarged video image
5:04 PM
DVD
Page 12
MPEG4
During playback or pause mode, press ZOOM repeatedly to select zoom mode.
You can move through the zoomed picture using vVb B buttons. Press
CLEAR to exit.
Viewing the title menu
DVD
Press TITLE to display the disc's title menu, if available.
Viewing the DVD menu
DVD
Playing MPEG4 movie file
ON REMOTE
1 Open the disc tray:
Z
2 Insert a disc:
-
3 Close the disc tray:
Z
4 Select a movie file from the menu:
v V, DVD MENU
OPEN/CLOSE
OPEN/CLOSE
Press DVD MENU to display the disc menu, if available.
5 Start playback:
N
PLAY
Starting play from selected time
6 To stop playback:
x
STOP
DVD
MPEG4
Searches for the starting point of entered time code. Press DISPLAY then
select clock icon. Enter a time then press ENTER. For example, to find a scene
at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER.
If you enter the wrong number, press CLEAR to enter again.
Playing MPEG4 movie file -
Last Scene Memory
Changing the character set to display MPEG4 subtitle correctly
DVD
ACD
This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch off the
unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five
minutes. If the Screen Saver is displayed for five minutes, the unit automatically
turns itself off.
Mixed disc or USB Flash Drive – MPEG4, MP3/WMA and JPEG
When playing a disc or USB Flash Drive contained with MPEG4, MP3/WMA
and JPEG files together, you can select which menu of files you would like to
play by pressing TITLE.
12
more you can do
Press and hold SUBTITLE for 3 seconds during playback. The language code
will appear. Press b B to select another language code until the subtitle is
displayed properly and then press ENTER.
MPEG4 file requirement
This unit does not support the DivX file.
MPEG4 file compatibility with this player is limited as follows:
• Available resolution size: 720x576 (W x H) pixel
• The file names of MPEG4 and subtitle are limited to 45 characters.
• MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”
• Playable MPEG4 subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle System (.txt),
VobSub(*.sub)
Sub/idx, stream based format
• Playable Codec format: “3IV1 “, “3IV2”
• Playable Audio format: “Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”
• Sampling frequency: within 8 - 48 kHz (MP3), within 22 - 48 kHz (WMA)
• Bit rate: within 8 - 320 kbps (MP3), within 32 - 256 kbps (WMA),
less than 6Mbps (MPEG4 file)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Floder: Less than 600 (total number of files and folders)
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 13
Notes on MPEG4 format
MP3/WMA music file requirement
• The “This file has the non-supported type on the player. Please move into
browser and select the other file.” will appear if this unit does not support the
MPEG4 file.
• If the video and audio structure of MPEG4 file is not interleaved, returns to
the menu screen.
• If there is impossible code to express in the MPEG4 file name, it may be
displayed as “_” mark.
MP3/WMA compatibility with this unit is limited as follows:
• File extensions: “.mp3”, “.wma”
• Sampling frequency: within 8 - 48 kHz (MP3), within 22 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3), within 32 - 256kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Folder: Less than 600 (total number of files and folders)
Listening to Music Disc or files
ON REMOTE
1
2
3
4
5
6
Open the disc tray:
Insert a disc:
Close the disc tray:
Select a music from the menu:
Start playback:
To stop playback:
Z OPEN/CLOSE
Z OPEN/CLOSE
v V, DVD MENU
N PLAY
x STOP
Listening to Music Disc or files - more you
can do
Creating your own program
You can play the contents of a disc in the order you want by arranging the order
of the musics on the disc. To add a music(s) on the program list, press
PROGRAM to enter the program edit mode ( E mark appears on the menu).
Select a desired music on the [List] then press ENTER to add the music to the
program list. Select a music from the program list then press ENTER to start programmed playback. To clear a music from the program list, select the music you
want to clear then press CLEAR in program edit mode. To clear all music from
the program list, select [Clear All] then press ENTER in program edit mode. The
program is cleared when the disc is removed or the unit is turned off.
Playing an CD-G disc
Once you insert an CD-G disc, a menu appears on the screen. Use vV to
select a track then press PLAY ( N). To display the CD-G menu during
x ) twice.
playback, press STOP (x
You can display the setup menu by pressing SETUP only when CD-G menu
appears on the TV screen.
Viewing photo files
ON REMOTE
1
2
3
4
5
6
Open the disc tray:
Insert a disc:
Close the disc tray:
Select a photo file on the menu:
Display the selected file in full screen:
To return to the menu:
Z OPEN/CLOSE
Z OPEN/CLOSE
v V, DVD MENU
N PLAY
x STOP
Viewing photo files - more you can do
Viewing photo files as a slide show
Use vV b B to highlight ( ) icon then press ENTER to start slide show.
You can change slide show speed using b B when ( ) icon is highlighted.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
Rotate a photo
Use vV to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue
the slide show.
Listening to music during slide show
You can listen to music during slide show, if the disc contain music and photo
files together. Use vV b B to highlight (
) icon then press ENTER to start
slide show.
Displaying file information (ID3 TAG)
While playing a MP3 file containing file information, you can display the
information by pressing DISPLAY repeatedly.
13
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 14
Watching a enlarged photo image
While viewing a photo in full screen, press ZOOM repeatedly to select zoom
mode. You can move through the zoomed photo using vVb B buttons.
Press CLEAR to exit.
Photo file requirement
JPEG file compatibility with this unit is limited as follows:
• File extensions: “.jpg”
• Photo size: Less than 5M recommended
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Folder: Less than 600 (total number of files and folders)
Using an USB Flash Drive
You can play MP3/WMA/JPEG/MPEG4 in the USB Flash Drive with version
2.0/1.1.
ON REMOTE
1 Connect an USB Flash Drive to the USB
port on the unit:
-
2 Display the menu screen in stop mode:
O
3 Select a file:
v V, DVD MENU
4 Play the file:
N
5 Remove the USB Flash Drive:
-
RETURN
PLAY
Notes an USB Flash Drive
O) only in stop
• You can switch USB and DISC mode by pressing RETURN (O
mode.
• Do not extract the USB device in operating.
• Regular back up is recommended to prevent data loss.
• If you use a USB extension cable or USB HUB, the USB device might not be
recognized.
• Music files (MP3/WMA), photo files (JPEG) and MPEG4 files can be played.
For details of operations on each files, refer to relevant pages.
• This unit is not supported when the total number of files is more than 600.
• Bit rate: within 8 - 320 kbps (MP3), within 32 - 256 kbps (WMA),
less than 6Mbps (MPEG4 file)
• The USB function of this unit does not support all kinds of USB devices.
• Digital camera and mobile phone are not supported.
• USB port of the unit can not be connected to PC. The unit can not be used
as a storage device.
14
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 15
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose a area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
15
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 16
Specifications
Troubleshooting
Symptom
No power.
Cause
The power cord is disconnected.
Correction
Plug the power cord into the wall
outlet securely.
General
Power requirements
Power consumption
Dimensions (Approx.)
The power is on,
but the unit does
not work.
No disc is inserted.
No picture.
The TV is not set to receive the
signal from the unit.
Select the appropriate video input
mode on the TV.
The video cable is not connected
securely.
Connect the video cable securely.
The equipment connected with
the audio cable is not set to
receive the signal from the unit.
Select the correct input mode of
the audio amplifier.
The AUDIO options are set to the
wrong position.
Set the AUDIO settings to the
correct position.
An unplayable disc is inserted.
Insert a playable disc. (Check the
disc type and regional code.)
The rating level is set.
Change the rating level.
The remote control is not pointed
at the remote sensor on the unit.
Point the remote control at the
remote sensor of the unit.
HDMI Video/Audio Output
Audio Output
The remote control is too far from
the unit.
Operate the remote control closer
to the unit.
Digital Output (Coaxial)
No sound.
The unit does not
start playback.
The remote control does not work
properly.
Insert a disc.
Net Weight (Approx.)
Operating temperature
Operating humidity
Laser
Signal system
AC 120V~60Hz
8W
360 x 45.5 x 210 mm
(W x H x D) without foot
1.4 kg
5 °C to 35 °C
5 % to 90 %
Semiconductor laser
NTSC
Inputs
USB IN
4 pin (USB 2.0/1.1 standard)
Outputs
Video Output
Component Video Output
S-Video Output
1.0 V (p-p), 75 Ω, sync negative,
RCA jack (L, R) x 1
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω,
RCA jack x 2
(Y) 1.0 V (p-p), 75 Ω,
sync negative, Mini DIN 4-pin x 1
(C) 0.3 V, 75 Ω
19 pin(HDMI standard, Type A)
2.0 Vrms (1 KHz, 0 dB), 600 Ω,
RCA jack (L, R) x 1
0.5 V (p-p), 75 Ω, RCA jack x 1
Accessories
Video/Audio cable, Remote Control ,Lithium Battery
Designs and specifications are subject to change without
prior notice.
16
DV4M2H-N.BUSALLK_ENG
9/11/08
5:04 PM
Page 17
LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only
to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
LABOR: 90 days from the Date of Purchase.
PARTS: One Year from the Date of Purchase.
* Parts replaced are warranted for the remaining portion of the original warranty
period.
HOW SERVICE IS HANDLED:
Call 1-800-243-0000 for instructions on getting the defective unit repaired or
replaced.
Please retain dated sales receipt and your box to return the unit to LG for repair
or replacement.
Shipping both ways will be paid by LG during the Warranty Period. After the
Warranty Period, you pay inbound shipping charges and LG pays return shipping
charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied
warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that may
vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate
system components; and
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the
requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial
use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy, Product Assistance, or
Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select appropriate
options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
Issue O
Printed in Indonesia
P/No. : MFL58825709
17