Philips MCD299/98 Specification User manual


Add to my manuals
84 Pages

advertisement

Philips MCD299/98 Specification User manual | Manualzz

DVD Micro Theatre

Register your product and get support at www.philips.com/welcome

MCD299 pg001-pg020_MCD299-98-Eng-A 1 2007.9.27, 13:04

1

9

6

7

7

!

@

3

9

#

2 pg001-pg020_MCD299-98-Eng-A 2 2007.9.27, 13:04

5

2

7

0

4

9

7

8

9

1

&

(

7

9

5

0

%

@

*

$

2

3

)

4

(

8

7

8

6

#

§

^

£

!

¡

∞ pg001-pg020_MCD299-98-Eng-A 3 2007.9.27, 13:04

3

.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

MANUFACTURED UNDER LICENSE FROM DIGITAL

THEATER SYSTEMS, INC . US PAT. NO 5,451,942,

5,956,674, 5,974,380, 5,978,762, 6,226,616, 6,487,535

AND OTHER U.S AND WORLD-WIDE PATENTS ISSUED

AND PENDING. “DTS” AND “DTS DIGITAL SURROUND”

ARE RESISTERED TRADEMARKS OF DIGITAL THEATER

SYSTEMS, INC. COPYRIGHT 1996, 2003 DIGITAL THE-

ATER SYSTEMS, INC. ALL RIGHTS RESERVED.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Plays

TM

Windows

Media TM

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision

Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision

Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by

Macrovision Corporation. Reserve engineering or disassembly is prohibited.

4 pg001-pg020_MCD299-98-Eng-A 4 2007.9.27, 13:04

Index

English ------------------------------------------------ 6

-------------------------------------------------------- 45 pg001-pg020_MCD299-98-Eng-A 5

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

2007.9.27, 13:04

5

Contents

General Information

Features .................................................................. 8

Discs for playback ................................................ 8

Supplied accessories ............................................ 9

Environmental information ................................ 9

Care and safety information .............................. 9

Installation

Step 1: Connecting speakers ............................ 11

Step 2: Antennas Connection .......................... 11

Step 3: Connecting TV ....................................... 12

Using A/V OUT jack

Using Y Pb Pr OUT jack

Step 4: Placing the set and speakers ............... 13

Step 5: Connecting the power cord ............... 13

Optional: Connecting additional equipment .....

.......................................................................... 13-14

Listening to the playback of a non-USB device

Using the VCR for recording DVDs

Connecting a USB device or memory card

Controls

Controls on the system .................................... 15

Controls on the remote control .............. 15-16

Preparations

Step 1: Inserting batteries into the remote control .................................................................. 17

Using the remote control to operate the system

Step 2: Setting the clock ................................... 17

Step 3: Setting video preference .............. 18~19

Setting TV Type

Setting TV Display

Setting up Progressive Scan feature (for

Progressive Scan TV only)

Step 4: Setting language preference ......... 19~20

Basic Functions

Plug and Play ........................................................ 21

Switching the system on/off ............................. 21

Power-saving automatic standby ..................... 21

Sound control ..................................................... 21

DBB

DSC

Volume control ................................................... 22

Dimming the display screen ............................. 22

Demonstration mode ........................................ 22

Disc Operations

Playing discs ......................................................... 23

Using the disc menu .......................................... 23

Basic playback controls ............................... 23-25

Pausing playback

Selecting a track/chapter/title

Resuming playback from the last stopped point

Zoom

Differnt play modes: SHUFFLE and REPEAT

Repeat A-B

Slow Motion

Program

Forward/Reverse Searching

Time search & search by chapter/track number

Information display during playback

Special disc features ........................................... 25

Playing a Title

Camera Angle

Changing the Audio Language

Changing the Audio Channel

Subtitles

Playing MP3/WMA disc ..................................... 26

General operation

Playback selection

Playing JPEG Picture CD ................................... 26

General operation

Playback selection

Special JPEG features ......................................... 27

Zoom picture

Slide show playback modes

Playback with multi-angles

6 pg001-pg020_MCD299-98-Eng-A 6 2007.9.27, 13:04

System Menu Options

Basic operations ................................................. 28

General Setup Page ............................................ 28

OSD Lang

Screen Saver

Audio Setup Page ........................................ 28~29

Night Mode

Digital Output

Dolby Digital Setup

Video Setup Page ................................................ 29

TV Display

Progress

TV Type

Preference Page ........................................... 29~31

Audio

Subtitle

Disc Menu

Parental

Password

Default

Radio Reception

Tuning to radio stations .................................... 32

Programming radio stations ...................... 32~33

Automatic programming

Manual programming

Tuning to preset radio stations ....................... 33

Changing tuning grid .......................................... 33

External Sources

Using a non-USB device .................................... 34

Using a USB mass storage device ............. 34-35

Timer

Timer setting ....................................................... 36

Sleep timer setting ............................................. 37

Specifications

........................................... 38

Troubleshooting

............................. 39~41

Glossary

......................................................... 42

Contents

Appendix

............................................... 43~44

How to mount your system onto wall .. 43~44

What’s in the supplied mounting kit

What else you’ll need

Preparation

Mounting your main unit onto wall

Mounting your speakers onto wall pg001-pg020_MCD299-98-Eng-A 7 2007.9.27, 13:04

7

8

General Information

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome.

Features

Your DVD Micro Theatre with 2.1 channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology.

Other features include:

Built-in Dolby Digital decoder, supporting

Incredible Surround and DSC sound setting.

Additional Component Connections

Lets you connect other audio and audio/visual components to the system so you can use the system’s surround sound speakers.

Parental control (rating level)

Lets you set a rating level so that your children cannot watch a DVD that has a rating higher than you set.

Sleep timer

Enables the system to switch to standby mode automatically at a preset time.

Night Mode

Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode.

Progressive Scan

Provides high quality flicker-free images for film based sources. When a picture refreshes, its vertical resolution can double to 525 lines.

Note:

– To fully enjoy the progressive scan feature, you need a progressive scan TV.

Discs for playback

Your DVD System will play:

– Digital Video Discs (DVDs)

– Video CDs (VCDs)

– Super Video CDs (SVCDs) pg001-pg020_MCD299-98-Eng-A 8

– Digital Video Discs + Rewritable

(DVD+RW)

– Compact Discs (CDs)

– Picture (Kodak, JPEG) files on CDR(W)

– Windows Media Audio (WMA)

– Supported MP3-CD format.

ISO 9660 / UDF format

Max. title/album name –10 characters

Max. title number plus album is 255.

Max. nested directory is 8 levels.

The max. album number is 32.

The max. MP3 track number is 999.

Supported sampling frequencies for MP3 disc: 32 kHz, 44.1 kHz, 48 kHz.

Suppor ted Bit-rates of MP3 disc are: 32, 64,

96, 128, 192, 256 (kbps).

The following formats can’t be supported

The files like *.VMA, *.AAC, *.DLF, *.M3U,

*.PLS, *.WAV,

The discs recorded under Joliet format

Region Codes

DVDs must be labeled as shown below in order to play on this DVD system. You cannot play discs that are labeled for other regions.

ALL 3

Notes:

– For mixed mode discs, only one mode will be selected for playback according to the recording format.

– If you are having trouble playing a certain disc, remove the disc and try a different one. Improperly formatted discs will not play on this system.

2007.9.27, 13:04

General Information/Maintenance

Supplied accessories

– A/V cord (R/W/Y)

– Component video cables (red/blue/green)

– FM wire antenna

– MW loop antenna

– 15-pin D-Sub cable

– Stands for the main set and speakers

– Wall mounting kit

– Remote Control

– This instruction booklet and a quick start guide

Do not block the vents

Do not operate the system in an enclosed cabinet and allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers table-cloths, curtains, etc.

Environmental information

All unnecessar y packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Cleaning the cabinet

Use soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning discs

To clean a disc, wipe it in a straight line from the center towards the edge using soft and lint-free cloth. A cleaning agent may damage the disc.

Write only on the printed side of a disc and only with a soft felt-tipped pen.

Handle the disc by its edge. Do not touch the surface.

Care and safety information

Avoid high temperatures, moisture, water and dust

Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight).

No objects filled with liquids, such as vases, shall be placed on the apparatus.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

The apparatus shall not be exposed to dripping or splashing.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Finding a suitable location

Place the player on a flat, hard, stable surface.

Install this unit near the AC outlet and where the

AC power plug can be reached easily.

Avoid condensation problem

The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc.

Leave the player in the warm environment until the moisture evaporates.

9 pg001-pg020_MCD299-98-Eng-A 9 2007.9.27, 13:04

Installation

AC power cord

Subwoofer

AC CORD

A/V cord

AUDIO

IN

S-VIDEO

IN

VIDEO IN

TV IN

AUDIO

S-VIDEO

VIDEO IN

TV IN

FM wire antenna

MW loop antenna

Speaker

(right)

Speaker

(left)

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

IMPORTANT!

– The type plate is located at the rear of the system.

– The voltage selector located at the rear of this system is preset at

220V-240V from the factory. For countries that operate at 110V-127V, please adjust to 110V-127V before you switch on the system.

– Before connecting the AC power cord on the rear of the subwoofer to the wall outlet, ensure that all other connections have been made.

– Never make or change any connections with the power switched on.

– High voltage! Do not open. You run the risk of getting an electric shock.

– The machine does not contain any user-serviceable parts.

– Modification of the product could result in hazardous radiation of EMC or other unsafe operation.

To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down

before reusing it (not available for all versions).

Note:

– Before installation is finished, it is not recommended to remove the protective plastic film attached to the surface of the front panel to avoid any scratch caused during installation.

10 pg001-pg020_MCD299-98-Eng-A 10 2007.9.27, 13:04

Step 1: Connecting speakers

AC CORD

Installation

Step 2: Antennas Connection

Connect the supplied MW loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.

MW Antenna

Position the antenna as far as possible from a TV,

VCR or other radiation source.

SPEAKERS 6 Ω

R

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

1

Place the main set with the front side facing down on a flat and firm surface.

2

Connect the two front speaker cables to the

SPEAKERS (6 ) terminals: right speaker to

"R" and left speaker to "L".

3

Remove the detachable cover at the left bottom of the main set to expose the CONNECT TO

SUB WOOFER terminal.

4

Connect the CONNECT TO SUB

WOOFER terminal of the main set to the

CONNECT TO MAIN SET terminal of the subwoofer with the supplied 15-pin D-Sub cable by matching the pins. Fix the two screws on the connectors to ensure firm connection.

5

Mount the detachable cover back until hearing a click.

Notes:

– Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

– For optimal sound performance, use the supplied speakers.

– Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

– The delivery-attached 15-pin D-Sub cable is intended for use with this system only. Never try it on any other devices (e.g., do not use it in connection of your PC).

FM Antenna

1

2

For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal.

pg001-pg020_MCD299-98-Eng-A 11 2007.9.27, 13:04

11

Installation

Step 3: Connecting TV

IMPORTANT!

– You only need to make one video connection from the following options, depending on the capabilities of your TV.

– Connect the DVD system directly to the TV.

Using AV OUT jack

Using Y Pb Pr OUT jack

IMPORTANT!

– The progressive scan video quality is only possible when using Y Pb Pr, and a progressive scan TV is required.

R

AUDIO

IN

VIDEO IN

TV IN

AUDIO

S-VIDEO

VIDEO IN

TV IN

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

1

Connect the end of the supplied AV cord with only one connector to the AV OUT jack of the

DVD system.

2

For the other end, connect the video output connector (yellow) to the video input jack (or labeled as A/ V In, CVBS, Composite or

Baseband) on the TV. To hear the sound of this

DVD system through your TV, connect the audio connectors (white/ red) to the audio input jacks on the TV.

1

Use component video cables (red/blue/green) to connect the COMPOENT VIDEO

OUTPUT (Pr/Cr Pb/Cb Y) jack to the corresponding Component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.

2

If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability), to activate TV Progressive Scan, please refer to your TV user manual. For DVD system

Progressive Scan function, see "Preparations-

Setting up Progressive Scan feature".

Note:

– If your TV does not support Progressive Scan, you will not be able to view the picture.

12 pg001-pg020_MCD299-98-Eng-A 12 2007.9.27, 13:04

Step 4: Placing the set and speakers

With the supplied detachable stands and wall mounting kit, you can either place the main set and speakers on desktop or mount them onto wall. Desktop installation is taken for example here. For how to mount the system onto wall, please refer to Appendix and the attached Wall

Mounting Instructions.

1

Align the side marked PRESS

4 of the largersize stand with the slots at the bottom of the main set.

Installation

Step 5: Connecting the power cord

After everything is connected properly, plug in the AC power cord on the rear of the subwoofer to the power outlet.

Never make or change any connection with the power switched on.

Optional: Connecting additional equipment

Listening to the playback of a non-USB device

AUDIO OUT

L R

2

Push the stand down into the slots until you hear a click.

3

Attach the two smaller-size stands to the speakers in the same way.

4

Place the main set and speakers upright on the desktop with the support of the stands.

Note:

– To remove the stand from the main set or either speaker, while pressing down PRESS

4, pull the stand out from the slots.

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

VCR

(for example)

Connect the system's AUX IN (R/L) jacks to the AUDIO OUT jacks on the other audio/ visual device (such as a VCR, Laser Disc player or cassette desk) (cable not supplied).

Before starting operation, press SOURCE on the front panel to select AUX or press AUX on the remote control in order to activate the input source.

pg001-pg020_MCD299-98-Eng-A 13 2007.9.27, 13:04

13

Installation

Using the VCR for recording DVDs

VCR

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

VIDEO IN

AUDIO IN

L

R

1

Connect the end of the supplied AV cord with only one connector to the A/V OUT jack of the DVD system.

2

For the other end, connect the video output connector (yellow) to the VIDEO IN jack on the

VCR and the audio connectors (white/ red) to the corresponding audio input jacks on the VCR.

This will allow you to make analogue stereo

(two channel, right and left) recordings.

Connecting a USB device or memory card

IMPORTANT!

– Before connecting the USB plug, first slide open the protective cover on the

socket.

By connecting a USB mass storage device

(including USB flash memory, USB flash players or memory cards) to the Hi-Fi system, you can enjoy the device's stored music through the powerful speakers of Hi-Fi system.

Insert the USB device's USB plug into the socket on the set.

for the devices with USB cables:

1

Insert one plug of the USB cable (not supplied) to the socket on the set.

2

Insert the other plug of the USB cable to the

USB output terminal of the USB device.

for the memory card:

1

Insert the memory card into a card reader (not supplied).

2

Use a USB cable (not supplied) to connect the card reader into the socket on the set.

14 pg001-pg020_MCD299-98-Eng-A 14 2007.9.27, 13:04

Controls on the system

1 STANDBY-ON y

– switches the system on or to standby mode.

2

Display screen

– shows the status of the system.

3

LEFT ç

– opens/closes the left disc door.

4 RIGHT ç

– opens/closes the right disc door.

5 iR SENSOR

– remote sensor

6

VOLUME -/+

– adjusts the volume level.

7 Disc trays

8

Mode Selection

à / á for TUNER .................... tunes to a station.

*for DISC/USB ........... fast searches back and forward within a track/disc.

for Clock/Timer ......... sets the hour.

9 ......................................... stops disc playback or erases a disc program.

ÉÅ ............................... starts or interrupts playback.

¡ / ™ for TUNER .................... selects a preset radio station.

for DISC/USB .............. skips to the previous/next chapter/title/track.

for Clock/Timer ......... sets the minute.

9

DISC 1/2/3/4

– selects a disc tray for playback.

0 CLOCK

Standby mode

*– sets the system clock.

Playback mode

– displays the system clock.

!

SOURCE

– to select the respective sound source : DISC,

USB, TUNER (FM/MW) or AUX.

@

DSC•DBB

*– selects different types of preset sound equalizer settings (FLAT, POP, CLASSIC, ROCK, JAZZ).

– enables or disables bass enhancement.

Controls

# USB DIRECT

– jack for the external USB mass storage device.

Controls on the remote control

1

STANDBY-ON y

– switches the system on or to standby mode.

2 Numeric Keypad (0-9)

– inputs a track/title/chapter number of the disc.

3

PROGRAM

– DVD/VCD/CD/MP3-CD/USB: enters the program menu.

– Picture CD: during playback, to select a slide show mode.

– Tuner : programs preset radio stations.

4

SOURCE

– to select the respective sound source: DISC,

USB, TUNER (FM/MW) or AUX.

5

SYSTEM MENU (disc mode only)

– to enter or exit the system menu bar.

6 DISC MENU (disc mode only)

– DVD/VCD: enters or exits the disc contents menu.

– VCD2.0: switches the playback control mode on or off .

7 à / á

Tuner

– press to tune to a lower/higher radio frequency gradually.

– press and hold, then release the key to start automatic search for a radio frequency downward/upward.

Disc/USB

– searches fast backward/forward.

– In DISC mode, to select a movement direction in the disc menu or system menu bar.

– for clock/timer, to set the hour.

8 3/4

– In DISC mode, to select a movement direction in the disc menu or system menu bar.

– selects different slow playback modes for a VCD/

SVCD/DVD.

* = Press and hold the button for more than three seconds.

pg001-pg020_MCD299-98-Eng-A 15 2007.9.27, 13:04

15

Controls

9 OK

– to exit or confirm the selection.

0 í/ë

– Disc: skips to the previous/next chapter/title/ track.

– Tuner: selects a preset radio station.

– for clock/timer, to set the minute.

!

9

– In DISC/USB mode, to stop playback or clear a program.

@ 2;

– In DISC/USB mode, to star t or interrupt playback.

# VOL +/-

– adjusts the volume upward/downward.

$

MODE

– selects various repeat modes or the shuffle play mode for a disc.

% SUBTITLE

– selects a subtitle language.

^ TIMER/SLEEP

Standby mode

– sets time for switching on the system automatically.

Power-on mode

– sets the sleep timer function (auto off).

& DISC 1/2/3/4

– selects a disc tray for playback.

*

DSC/DBB

*– selects different types of preset sound equalizer settings (FLAT, POP, CLASSIC, ROCK, JAZZ).

– enables or disables bass enhancement.

( L ç/ R ç

– opens/closes the left/right disc door.

) MUTE

– to interrupt or resume sound reproduction.

¡

DISPLAY/OSD

– displays information on TV screen during playback.

A-B

– for VCD/CD/USB: to repeat a specific section within the same track.

– for DVD: to repeat a specific section in a disc.

£

DIM

– selects different levels of brightness for the display screen.

AUDIO for VCD

– sets Stereo, Mono-Left or Mono-Right sound mode.

for DVD

– selects an audio language.

∞ ZOOM

– DVD/VCD/Picture CD: enlarges or reduces a picture or active image on the TV screen.

§ ANGLE/RDS (RDS function unavailable for this version)

*– DVD: selects a DVD camera angle.

≥ GOTO

– In DISC mode, to fast search in a disc by entering a time, title, chapter or track.

Notes for remote control:

– First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or

TUNER, for example).

– Then select the desired function ( 2; , í,

ë for example).

16 pg001-pg020_MCD299-98-Eng-A

* = Press and hold the button for more than three seconds.

16 2007.9.27, 13:04

Preparations

IMPORTANT!

– Make sure to complete the preparation procedures before operating the system.

Step 1: Inserting batteries into the Remote Control

3

1

2

Step 2: Setting the clock

The clock can be set in either 12-hour or

24-hour mode.

1

In standby mode, press and hold CLOCK on the front panel.

2

Press à / á to set the hours.

3

Press í/ë to set the minutes.

4

Press PROGRAM to select clock mode.

5

Press CLOCK to confirm the time.

Notes:

– The clock setting will be erased when the system is disconnected from the power supply.

– The system will exit clock setting mode if no button is pressed within 90 seconds.

1

Open the battery compartment.

2

Insert two AAA batteries following the indications (+/-) inside the compar tment.

3

Close the cover.

Using the Remote Control to operate the Player

1

Aim the Remote Control directly at the remote sensor

(IR) on the front panel.

2

Do not put any objects between the Remote Control and the

DVD Player while operating the

DVD Player.

CAUTION!

Remove batteries if they are exhausted or if the Remote Control is not being used for a long time.

Do not use old and new or different types of batteries in combination.

Batteries contain chemical substances, so they should be disposed of properly.

pg001-pg020_MCD299-98-Eng-A 17 2007.9.27, 13:04

17

Preparations

Step 3: Setting video preference

IMPORTANT!

– Make sure you have completed all the necessary connections. (See

"Connections-Connecting TV".)

– – Video Setup Page – –

TV Display

PROGRESS

TV Type PAL

Multi

NTSC

NTSC

– If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format.

Setting TV Display

Select the aspect ratio of the TV to be connected.

4:3 PAN SCAN (Pan and Scan mode )

– If you have a conventional TV set and your

DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a por tion automatically cut off.

Turn on the TV set and set it to the correct

Video-In channel.

You may go to channel 1 on your TV set, then press the channel button repeatedly until you see the Video In channel.

Or, you can use the TV remote control to select different video modes.

Or, set TV to channel 3 or 4 if you are using an RF modulator.

1

In stop mode or during playback, press

SYSTEM MENU.

2

Press à/á/5/4 on the remote control to toggle through the functions and select your preferential option.

Move to Video Setup Page and press 4.

Move to one of the following and press á.

Setting TV Type

Allows you to select the colour system matching the connected TV set.

PAL

– If the connected TV is PAL system, select this mode. It will change the video signal of a NTSC disc and output in PAL format.

Multi

– If the connected TV is multi system, select this mode.The output format will be in accordance with the video signal of the disc.

4:3 LETTER (Letterbox mode )

– If you have a conventional TV set and your

DVD is formatted for widescreen viewing, use this setting. A wide picture with bands displayed on the upper and lower portions of the TV screen.

16:9 (Wide screen mode)

– If you have a widescreen TV set, use this setting (you must also set your widescreen TV to

“full size”) available on a disc, then the disc’s own preference will be used.

18 pg001-pg020_MCD299-98-Eng-A 18 2007.9.27, 13:04

Preparations

Note:

The format you select must be available on the disc. If it is not, the setting for TV Display will not affect the picture during playback.

To exit the menu

Press SYSTEM MENU again.

Setting up Progressive Scan feature (for

Progressive Scan TV only)

The progressive scan display twice the number of frames per seconds than interlaced scanning

(ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality.

IMPORTANT!

Before enabling the progressive scan feature, you must ensure:

1) Your TV can accept progressive signals, a progressive scan TV is required.

2) You have connected the DVD player to your

TV using Y Pb Pr (see “Installation-Step 3:

Connecting TV - Using Y Pb Pr OUT jack ”.)

1

Turn on your TV.

2

Turn off your TV progressive scan mode or turn on interlaced mode (refer to your TV user manual).

3

Press STANDBY-ON B to turn on the DVD player.

4

Select the correct Video Input channel.

The DVD background screen appears on the

TV.

5

Press SYSTEM MENU.

6

Press à/á repeatedly to select "Video

Setup page".

7

Move to “Progress” and press á.

8

Move to “On” and press OK to confirm.

The setup is complete now and you can star t to enjoy the high quality picture.

Step 4: Setting language preference

You can select your preferred language settings so that this DVD Micro System will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the language set by default will be used instead. But the menu language of the DVD Micro System cannot be changed once selected.

1

In stop mode or during playback, press

SYSTEM MENU.

2

Press à/á/5/4 on the remote control to select your preferred option.

Move to General Setup Page and

Preference Page respectively and press 4.

Move to one of the following and press á.

– – General Setup Page – –

OSD Lang

Screen Saver

English

Spanish

Portuguese

Thai

Chinese

Others

OSD Lang (On-Screen Display)

Switches the display language on the TV screen.

Select the language from the displayed list.

pg001-pg020_MCD299-98-Eng-A 19 2007.9.27, 13:04

19

Preparations

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default

English

Spanish

Portuguese

Thai

Chinese

Others

Audio (DVD only)

Switches the display language of the sound track.

Select the language from the displayed list.

Subtitle (DVD only)

Switches the display language of the subtitle.

Select the language from the displayed list.

Disc Menu (DVD only)

Select the language for the DVD menu.

When the selected language is not recorded in the DVD, one of the recorded languages will be selected automatically (except for OSD).

You can reset all the DVD settings except for

Rating.

If the language selected is not available on the disc, the original language designated by each disc will be selected.

3

Press

5/4 to select a language and press OK.

4

Repeat steps 2~3 for other settings.

To exit the menu

Press SYSTEM MENU again.

20 pg001-pg020_MCD299-98-Eng-A 20 2007.9.27, 13:04

Basic Functions

Plug and Play

(for tuner installlation)

Plug and Play allows you to store all available radio stations automatically.

First time setup/power up

1

When you turn on the main supply, "

AUTO

INSTALL - PRESS PLAY" is displayed.

2

Press ÉÅ on the system to start installation.

"

PLUG AND PLAY" .... "INSTALL" is displayed, followed by "

TUNER" and "AUTO".

PROG

starts flashing.

All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by MW band.

When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played.

To reinstall Plug and Play

1

In standby or demonstration mode, press and hold ÉÅon the system until "AUTO INSTALL

-

PRESS PLAY" is displayed.

1

Press ÉÅ again to start installation.

All previously stored radio stations will be replaced.

Switching the system on/off

Press STANDBY-ON B.

Press DISC, USB, TUNER or AUX on the remote.

The system will switch to the selected source.

Press LEFT ç or RIGHT ç on the front panel (L ç or R çon the remote).

The system will switch to the disc source.

To switch the system to standby mode

Press STANDBY-ON B.

The interactive sound settings, last selected source and tuner presets will be retained in the player’s memory.

Power-saving automatic standby

As a power-saving feature, the system will automatically switch to Standby mode if you do not press any buttons within 15 minutes after a disc has stopped playing.

Sound Control

DBB and DSC sound features cannot be activated at the same time.

To exit without storing the Plug and Play

Press

9 on the system.

If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again.

Notes:

– When the power is turned on, the disc tray may open and close to initialise the system.

– If no stereo frequency is detected during Plug and Play, "

CHECK ANTENNA" will be displayed.

– During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and

Play mode.

DBB (Dynamic Bass Boost)

DBB enhances the bass response.

Press DSC•DBB on the remote to enable/ disable DBB feature.

Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.

DSC (Digital Sound Control)

DSC provides a different type of preset sound equalizer setting.

Press and hold DSC•DBB on the remote repeatedly to select: FLAT, POP, CLASSIC, ROCK or JAZZ.

pg021-pg044_MCD299-98-Eng-B 21 2007.9.27, 13:04

21

Basic Functions

Volume control

Press VOLUME -/+ (VOL +/- on the remote) to increase or decrease the volume level.

VOL XX” is displayed on the display panel.

XX” denotes the volume level.

To switch off the volume temporarily

Press MUTE on the remote.

Playback will continue without sound and

MUTING” flashes.

To activate sound reproduction, you can:

– press MUTE again;

– adjust the volume controls;

– change source.

Dimming the display screen

Press DIM repeatedly to select different levels of brightness for the display screen.

Demonstration mode

The system has a demonstration mode that shows the various features offered by the system.

To activate the demonstration

In standby mode, press

9 on the system to activate the demo mode.

Demonstration will begin.

To deactivate the demonstration

Press

9 on the system again.

DEMO OFF” is displayed.

Note:

– Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again.

22 pg021-pg044_MCD299-98-Eng-B 22 2007.9.27, 13:04

IMPORTANT!

– This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism.

– Do not move the system during playback. Doing so may damage the system.

– DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.

– According to the format requirement of DVD or VCD, some operations may be different or restricted.

– Do not push on the disc tray or put any objects other than disc in the slot loader. Doing so may cause the disc player malfunction.

– If ø appears on the TV screen when a button is pressed, it means the function is not available on the current disc at the current time.

Playing discs

1

Connect the power cords of the system and TV

(or any optional stereo or AV receiver) to a power outlet.

2

Turn on the TV power and set to the correct

Video In channel. (See "Setting up the TV".)

3

Press STANDBY-ON 2.

You should see the blue Philips DVD background screen on the TV.

4

Press LEFT ç or RIGHT ç on the front panel (L ç or R çon the remote control) to open the left or right disc door respectively.

➜ OPEN is displayed when the left or right disc door slides open.

5

Insert one or more discs with the printed side facing you. Press LEFT ç or RIGHT ç on the front panel (L ç or R çon the remote control) again to close the disc door.

Disc Operations

➜ CLOSE is displayed briefly. Then, the DVD player will play all the discs in the four disc trays one by one starting from “DISC 1”. If no disc is found in a disc tray, the DVD player will automatically turn to the next one. In this case,

CHANGING will be displayed briefly followed by

LOAD. If no disc is found in any of the four disc trays,

NO DISCwill be displayed.

If a disc menu appears on the TV, see "Using the disc menu".

If the disc is locked by parental control, you must enter your four-digit password. (See

"Preference Page - Password".)

6

At any time, simply press

9 to stop playback.

Using the disc menu

For disc with Table Of Contents, a menu may appear on the TV screen once you load the disc.

To select a playback feature or item

Use à/á/5/4 and OK or Numeric

Keypad (0-9) on the remote.

Playback will start automatically.

To access or exit the menu

Press DISC MENU on the remote.

For VCD with Playback Control (PBC) feature (version 2.0 only)

PBC playback allows you to play Video CDs interactively, following the menu on the display.

During playback, press DISC MENU.

If PBC was ON, it will switch to OFF and continue playback.

If PBC was OFF, it will switch to ON and return to menu screen.

Basic playback controls

Pausing playback (DVD/VCD/CD/MP3

/WMA)

1

During playback, press 2;.

Playback will pause and sound will be muted.

2

Press 2; again to resume.

23 pg021-pg044_MCD299-98-Eng-B 23 2007.9.27, 13:04

Disc Operations

Selecting a track/chapter/title (DVD/

VCD/CD/MP3/WMA)

1

Press í/ë during playback to go to the previous or next chapter/title/track.

2

To go directly to any chapter/ title/track, enter the chapter/ title/track number using the

Numeric Keypad (0-9).

Resuming playback from the last stopped point (DVD/VCD/CD/MP3

/WMA)

In stop mode and when a disc has not been removed, press 2;.

To cancel resume mode

In stop mode, press

9 again.

Zoom (DVD/VCD/JPEG)

Zooming allows you to enlarge or reduce the video image during playback.

1

Press ZOOM repeatedly to enlarge or reduce the playback video image.

2

Press

22/33/5/4 to pan across the TV screen.

Differnt play modes: SHUFFLE and

REPEAT (DVD/VCD/CD/MP3/WMA)

Press MODE on the remote control repeatedly to choose a repeat mode during playback.

in File list / Playlist mode:

Press MODE repeatedly to select the following:

REPEAT ONE

➜ REPEAT ALL ➜ SHUFFLE ➜

NORMAL PLAYBACK

In shuffle playback mode:

Press P button to select another track in a shuffle order.

Press

9 to stop shuffle playback.

Repeat A-B (DVD/VCD/CD/MP3/WMA)

1

Press A-B at your chosen starting point.

2

Press A-B again at your chosen end point.

The section A and B can be set only within the same chapter/track.

The section will now repeat continuously.

3

To exit the sequence, press A-B again.

Slow Motion (DVD/VCD)

1

Press

5 or 4 on the remote control during playback to select the required forward or backward speed: 1/2, 1/4, 1/8 or 1/16.

Sound will be muted.

2

To return to normal speed, press 2;.

Program (not for Picture CD)

To select favourite tracks/chapters for playback in preferred sequence.

For DVD - repeat chapter/title

Press MODE repeatedly to select the following:

REPEAT CHAPTER

➜ REPEAT TITLE ➜

REPEAT ALL

➜ SHUFFLE ➜ NORMAL

PLAYBACK

12

For SVCD/VCD/CD - repeat track/disc

Press MODE repeatedly to select the following:

REPEAT TRACK

➜ REPEAT ALL➜SHUFFLE ➜

NORMAL PLAYBACK

For MP3/WMA repeat - track/album/disc in Folder mode:

Press MODE repeatedly to select the following:

REPEAT ONE

➜ REPEAT ALL ➜ SHUFFLE ➜

NORMAL PLAYBACK

1

Press PROGRAM to enter the program mode.

2

Use the Numerical Keypad (0-9) to directly input the tracks or chapters.

3

Move the cursor by pressing à/á/5/4 to select START.

4

Press OK to start playback.

24 pg021-pg044_MCD299-98-Eng-B 24 2007.9.27, 13:04

Forward/Reverse Searching (DVD/VCD/

CD)

1

Press

22/33 during playback to select the required speed: X2, X4, X8, X16 or X32

(backward or forward).

Sound will be muted.

2

To return to normal speed, press 2;.

Time search & search by chapter/track number (DVD/VCD/CD/MP3/WMA)

1

Press GOTO until the time or chapter/track edit box appears.

2

Enter hours, minutes and seconds from left to right in the time edit box using the Numeric

Keypad (0-9) on the remote.

OR

Enter your desired chapter/track number in the chapter/track edit box using the Numeric

Keypad (0-9) on the remote.

Information display during playback

(DVD/VCD/CD/MP3/WMA)

During playback, press DISPLAY/OSD to show disc information on the TV screen.

For DVD/VCD/SVCD

A menu showing the disc information.

Display off.

For CD

Elapsed playback time of the current track.

Remaining playback time of the current track.

Elapsed playback time of the whole disc.

Remaining playback time of the whole disc.

Display off.

For MP3 CD/WMA

Elapsed playback time of the current track.

Remaining playback time of the current track.

Display off.

Disc Operations

Special disc features

Playing a Title (DVD)

1

Press DISC MENU.

The disc title menu appears on the TV screen.

2

Use à/á/5/4 to select a play option.

3

Press OK to confirm.

Camera Angle (DVD)

Press ANGLE/RDS repeatedly to select different desired angle.

Changing the Audio Language (for DVD recorded with multiple languages)

Press AUDIO repeatedly to select different audio languages.

Changing the Audio Channel (for VCD only)

Press AUDIO to select the available audio channels provided by the disc (Mono Left, Mono

Right or Stereo).

Subtitles (DVD)

Press SUBTITLE repeatedly to select different subtitle languages.

pg021-pg044_MCD299-98-Eng-B 25 2007.9.27, 13:04

25

Disc Operations

1

Load an MP3/WMA disc.

A data disc menu appears on the TV screen and playback starts automatically from the first track.

2

Press à to move to the album column on the left of the TV screen, then use

5/4 to select an album and press OK to open it.

3

IMPORTANT!

– You have to turn on your TV and set to the correct Video In channel. (See

"Setting up the TV".)

Playing MP3/WMA disc

General operation

00:00 00:00

001/005

??

MP3

??

MP3

??

MP3

\MP3\Sample\102A\

---

102A-G

102A-L

102A-F

Press

PHILIPS

á to move to the track column on the right of the TV screen and then use

5/4 to highlight a track; or directly use the Numeric

Keypad (0-9) to input a track number.

4

Press OK to confirm.

The playback will start from the selected track to the end of the album.

Playing JPEG Picture CD

General operation

1

Load a JPEG Picture CD.

A data disc menu appears on the TV screen and playback starts automatically from the first file.

2

Press à to move to the folder column on the left of the TV screen, then use

5/4 to select a folder and press OK to open it.

3

Press á to move to the file column on the right of the TV screen and then use

5/4 to highlight a file; or directly use the Numeric

Keypad (0-9) to input a file number.

4

Press OK to confirm.

The playback will start from the selected picture to the end of the folder.

Playback selection

During playback, you can:

Press í/ë to select another file in the current folder.

Use à/á/5/4 on the remote to rotate/flip the picture files.

Press 2; repeatedly to pause/resume playback.

Press

9 to stop playback and return to the disc content menu.

Note:

The disc reading time may exceed 10 seconds due to large number of songs compiled onto the disc.

Playback selection

During playback, you can:

Press í/ë to select another track in the current album.

Press 2; repeatedly to pause/resume playback.

26 pg021-pg044_MCD299-98-Eng-B 26 2007.9.27, 13:04

Special JPEG features

Zoom picture (JPEG)

During playback, press ZOOM repeatedly to display the picture with different scales (100%,

125%, 150%, 200%, 75%, 50% and OFF).

Use à/á/5/4 to view the zoomed picture.

Slide show playback modes (JPEG)

During playback, press PROGRAM repeatedly to select different slide-show playback modes:

Mode 0: NONE

Mode 1: WIPE TOP

Mode 2: WIPE BOTTOM

Mode 3: WIPE L

Mode 4: WIPE R

Mode 5: DIAGONAL L TOP

Mode 6: DIAGONAL R TOP

Mode 7: DIAGONAL L BOTTOM

Mode 8: DIAGONAL R BOTTOM

Mode 9: EXTEND CENTER H

Mode 10: EXTEND CENTER V

Mode 11: COMPRESS CENTER H

Mode 12: COMPRESS CENTER V

Mode 13: WINDOW H

Mode 14: WINDOW V

Mode 15: EDGE TO CENTER

Mode 16: MOVE IN FROM TOP

Playback with multi-angles (JPEG)

During playback, press à/á/5/4 to rotate the picture on the TV screen.

5: flip the picture vertically.

4: flip the picture horizontally.

à: rotate the picture anti-clockwise.

á: rotate the picture clockwise.

Disc Operations pg021-pg044_MCD299-98-Eng-B 27 2007.9.27, 13:04

27

System Menu Options

Basic operations

1

Press SYSTEM MENU to enter the Setup

Menu.

2

Press à/á to select a page to be set.

3

Press

5/4 to highlight an option.

4

Enter its submenu by pressing

3 or OK.

5

Move the cursor by pressing

5/4 to highlight the selected item.

6

Press OK to confirm.

To return to the upper-level menu

Press à.

To exit from the menu

Press SYSTEM MENU again.

The settings will be stored in the player’s memory even if the player is switched off.

Note:

– Some of the features in the System Menu

Options are described in “Preparations”.

General Setup Page

The options included in General Setup Page are:

“OSD Lang” and “Screen Saver”.

– – General Setup Page – –

OSD Lang

Screen Saver

Screen Saver

This function is used to turn the screen saver on or off.

Audio Setup Page

The options included in Audio Setup Page are:

“Night Mode”, “Digital Output” and “Dolby

Digital Setup”.

– – Audio Setup Page – –

NIGHT MODE

DIGITAL Output

Dolby Digital Setup

Night Mode

On: Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.

Off: Select this when you want to enjoy the surround sound with its full dynamic range.

This feature is only available for movies with

Dolby Digital mode.

Digital Output

Digital Off: Turns off the digital output.

Digital / Raw: If you have connected your

DIGITAL OUT to a multi-channel decoder/ receiver.

SPDIF / PCM: Only if your receiver is not capable of decoding multi-channel audio.

OSD Lang

See "Preparations-Step 4: Setting language preference" for details.

28 pg021-pg044_MCD299-98-Eng-B 28 2007.9.27, 13:04

Dolby Digital Setup

The options included in the Dolby Digital Setup page is: “Dynamic”.

– – Audio Setup Page – –

NIGHT MODE

DIGITAL Output

Dolby Digital Setup

System Menu Options

Video Setup Page

The options included in Video Setup Page are:

"TV Display", "Progress" and "TV Type".

– – Video Setup Page – –

TV Display

PROGRESS

TV Type

Dynamic

Optimises the dynamic sound output. High volume outputs are softened, enabling you to watch your favourite movie without disturbing others.

– – Dolby Digital Page – –

Dynamic

The levels for dynamic selection: FULL, 3/4, 1/

2, 1/4 and OFF.

Note:

– DTS surround audio output is not available in this DVD player.

TV Display

See "Preparations-Step 3: Setting video preference" for details.

Progress

See "Preparations-Step 3: Setting video preference" for details.

TV Type

See "Preparations-Step 3: Setting video preference" for details.

Preference Page

The options included in Preference Page are:

"Audio", "Subtitle", “Disc Menu”, “Parental”,

“Password” and "Default".

– – Preference Page – –

Audio

Subtile

Disc Menu

Parental

Password

Default pg021-pg044_MCD299-98-Eng-B 29

Audio

See "Preparations-Step 4: Setting language preference" for details.

29

2007.9.27, 13:04

System Menu Options

Subtitle

See "Preparations-Step 4: Setting language preference" for details.

Disc Menu

See "Preparations-Step 4: Setting language preference" for details.

Parental

Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level.

The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes.

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default

1 KID SAF

2 G

3 PG

4 PG 13

5 PGR

6 R

7 NC 17

8 ADULT

VCD, SVCD and CD have no level indication, so parental control function has no effect on those kinds of discs. This applies to most illegal DVD discs.

1

Press

5/4 to highlight “Parental”.

2

Enter its submenu by pressing á.

3

Use

5/4 to highlight a rating level for the disc inserted.

DVDs that are rated above the level you selected will not play unless you enter your fourdigit password and choose a higher level rating.

Note:

– Some DVDs are not encoded with a rating though the movie rating may be printed on the

Disc cover. The rating level feature does not work for such Discs.

Rating explanations

1 KID SAFE

– Suitable for children.

2 G

– General Audience; recommended as acceptable for viewers of all ages.

3 PG

– Parental Guidance suggested.

4 PG 13

– Material is unsuitable for children under age

13. Parental Guidance suggested.

5-6 PG-R, R

– Parental Guidance – Restricted; recommended that parents restrict children under 17 from viewing or allow them to view only when supervised by a parent or adult guardian.

7 NC-17

– No children under age 17; not recommended for children under age 17.

8 ADULT

– Material for adults only; viewed only by adults due to graphic sexual scenes, violence, or language.

Password

You can enter your four-digit password to activate or deactivate rating control.

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default

Change

30 pg021-pg044_MCD299-98-Eng-B 30 2007.9.27, 13:04

To change password

1

Move to "Password" and press á or OK to enter its submenu.

2

Press OK to enter the menu below.

System Menu Options

1

Press

5/4 to highlight “Default”.

2

Highlight “Reset” by pressing á.

3

Press OK to confirm selection.

Caution!

– When this function is activated, all settings will be reset to factory defaults.

PWD

OK

3

Use the Numeric Keypad (0-9) to enter your four-digit code.

➜ The password supplied by default is 1234.

4

Enter your new four-digit password using

Numeric Keypad (0-9).

4

Enter the new password again for confirmation.

4

Press OK to confirm and the new password takes effect.

Note:

– The default password (1234) is always active even if the password has been changed.

Default

Setting the “Default” function will reset all options and your personal settings to the factory defaults and all your personal settings will be erased.

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default Reset pg021-pg044_MCD299-98-Eng-B 31 2007.9.27, 13:05

31

Radio Reception

Tuning to radio stations

1

Press SOURCE on the front panel of the system repeatedly or TUNER on the remote to select TUNER.

➜ TUNER is displayed briefly.

2

Press SOURCE on the front panel of the system or TUNER on the remote once or more to select your waveband (FM/MW).

3

Press and hold à /á.

The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning:

SEARCH.

4

Repeat step 3 if necessary until you find the desired station.

To tune to a weak station, press à /á briefly and repeatedly until you have found optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations in the memory for each band.

Automatic programming

Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.

1

Press í / ë to select the preset number where programming should start.

Note:

– If no preset number is selected, default is preset

(1) and all your presets will be overridden.

2

Press PROGRAM for more than 2 seconds to activate programming.

➜ AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW. The last preset automatically stored will then be played.

32 pg021-pg044_MCD299-98-Eng-B 32 2007.9.27, 13:05

Manual programming

1

Tune to your desired station (see “Tuning to radio stations”).

2

Press PROGRAM to activate programming.

3

Press í / ë on the remote to allocate a number from 1 to 40 to this station.

4

Press PROGRAM again to confirm the setting.

The preset number and the frequency of the preset station are shown.

5

Repeat the above four steps to store other stations.

You can override a preset station by storing another frequency in its place.

Tuning to preset radio stations

Press í / ë until the desired preset station is displayed.

Changing tuning grid

(not available for all versions)

In North and South America, the frequency step between adjacent channels in the MW band is

10 kHz (9 kHz in some areas). The preset frequency step in the factory is 10 kHz.

Changing the tuning grid will erase all previously stored preset radio stations.

Press and hold

9 on the system in the tuner mode.

The display will show "

9 GRID" or

"

10 GRID".

Notes:

– GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively.

Radio Reception pg021-pg044_MCD299-98-Eng-B 33 2007.9.27, 13:05

33

External Sources

Using a non-USB device

1

Connect the system's AUX IN (R/L) jacks to the AUDIO OUT jacks on the other audio/ visual device (such as a VCR, Laser Disc player or cassette desk) (cable not supplied).

2

Press AUX to select external equipment.

"

AUX" is displayed.

Note:

– All the sound control features (DSC or DBB, for example) are available for selection.

– Refer to the operating instructions for the connected equipment for details.

Using a USB mass storage device

By connecting a USB mass storage device to the

Hi-Fi system, you can enjoy the device's stored music through the powerful speakers of Hi-Fi system.

Playing a USB mass storage device

Compatible USB mass storage devices

With the Hi-Fi system, you can use:

– USB flash memory (USB 2.0 or USB1.1)

– USB flash players (USB 2.0 or USB1.1)

– memory cards (requires an additional card reader to work with this Hi-Fi system)

Notes:

– In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. Such protected contents will be unplayable on any other devices (such as this

Hi-Fi system).

– Compatibility of the USB connection on this product: a) This product supports most USB Mass storage devices (MSD) that are compliant to the USB

MSD standards.

i) Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.

ii) If you see a "Disc Drive" show up on your computer after you plugged the mass storage device into your computer, most likely it is MSD compliant and it will work with this product.

b) If your Mass storage device required a battery/ power source. Please make sure you have a fresh battery in it or charge the USB device first and then plug it into the product again.

34

– Supported Music type: a) This device only supports unprotected music with the following file extension:

.mp3

.wma

b) Music bought from on-line music stores are not supported because they are secured by Digital

Rights Management protection (DRM).

c) File name extensions that end with the following are not supported:

.wav; .aac and etc.

– No Direct connection can be made from

Computer USB port to the product even you have either or both mp3 or wma files in your computer.

Supported formats:

– USB or memory file format FAT12, FAT16,

FAT32 (sector size: 512 bytes)

– MP3 bit rate (data rate): 32-320 Kbps and variable bit rate

– WMA v9 or earlier

– Directory nesting up to a maximum of 8 levels

– Number of albums/ folders: maximum 99

– Number of tracks/titles: maximum 999

– ID3 tag v2.0 or later

– File name in Unicode UTF8 (maximum length:

128 bytes)

The system will not play or support the following:

– Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display.

– Non-suppor ted file formats are skipped. This means that e.g.: Word documents .doc or

MP3 files with extension .dlf are ignored and will not be played.

– AAC, WAV, PCM audio files

– DRM protected WMA files

– WMA files in volatile bit rate format

How to transfer music files from PC to a

USB mass storage device

By dragging and dropping music files, you can easily transfer your favorite music from PC to a

USB mass storage device.

For the flash player, you can also use its music management software for the music transfer.

However, those WMA files may be unplayable for compatibility reasons.

pg021-pg044_MCD299-98-Eng-B 34 2007.9.27, 13:05

How to organize your MP3/WMA files on the USB mass storage device

This Hi-Fi system will browse the MP3/WMA files in the folders/sub-folders/titles order.

Example:

Root

Title 001

Title 002

Title 003

Album 01

Title 001

Title 002

Title 003

Album 02

Title 001

Title 002

Title 003

Album 03

Title 001

Title 002

Title 003

Organize your MP3/WMA files in different folders or subfolders as required.

Notes:

– If you have not organized MP3/WMA files into any albums on your disc, an album "00" will be automatically assigned for all those files.

– Make sure that the file names of MP3 files end with .mp3. and the file names of WMA files end with .wma.

– For DRM protected WMA files, use Windows

Media Player 10 (or later) for conversion. Visit www.microsoft.com for details about Windows

Media Player and WM DRM (Windows Media

Digital Rights Management).

1

Check the USB device has been properly connected. (See Installation: Connecting an additional appliance).

2

Press SOURCE once or more to select USB

(or USB on the remote control).

-

NO AUDIO appears if no audio file is found in the USB device.

External Sources

3

Play the USB's audio files as you do with the albums/tracks on a CD (See Disc Operations).

Notes:

– For compatibility reasons, the album/track information may differ from what it is displayed through flash players' music management software.

35 pg021-pg044_MCD299-98-Eng-B 35 2007.9.27, 13:05

Timer

Timer setting

The system can switch on to DISC, USB or

TUNER mode automatically at a preset time, serving as an alarm to wake you up.

IMPORTANT!

– Before setting the timer, ensure that the clock has been set correctly. See

“Preparations - Step 2: Setting the clock” for details.

– Timer setting can be activated only in the standby mode.

1

Press and hold TIMER/SLEEP on the remote control to select timer mode.

The last timer setting star ts flashing.

The selected source will be lighted.

2

Press SOURCE (DISC, USB or TUNER on the remote) to select the desired source.

You can press DISC 1/2/3/4 to select the specific disc you would like to play.

Before setting timer, make sure the music source has been prepared.

DISC – Load the disc(s). To start from a specific track, make a program (refer to “Disc

Operations - Program”).

USB – Correctly inser t a USB mass storage device.

TUNER – tune to the desired radio station.

3

Press à árepeatedly to set the hour for the timer to start.

4

Press í / ë repeatedly to set the minute for the timer to start.

5

Press TIMER/SLEEP on the remote control to store the start time.

At the preset time, the selected source will play.

To exit without storing the setting

Press Ç on the system.

Notes:

– When the preset time is reached and the selected disc tray is empty, the next available disc will be selected. If all the disc trays are not available, Tuner will be selected automatically.

– During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.

To deactivate the TIMER

Press TIMER/SLEEP on the remote control.

will disappear from the display.

To activate the TIMER

Press TIMER/SLEEP on the remote control.

will appear on the display.

36 pg021-pg044_MCD299-98-Eng-B 36 2007.9.27, 13:05

Sleep timer setting

The sleep timer enables the system to switch to standby mode automatically at a preset time.

1

Press TIMER/SLEEP on the remote control repeatedly to select a preset time.

The selections are as follows (time in minutes):

15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™

15 …

2

When you reach the desired length of time, stop pressing TIMER/SLEEP.

is shown, except for "

OFF" mode.

The sleep timer is now set.

To check the remaining length of time after sleep timer is activated

Press TIMER/SLEEP once.

To change the preset sleep timer

Press TIMER/SLEEP again while the remaining sleep timer is shown.

The display will show the next sleep timer options.

To deactivate the sleep timer

Press TIMER/SLEEP repeatedly until "

OFF" is displayed, or press STANDBY-ON B.

Note:

– will start flashing when the remaining length of time after activation of the sleep timer is less than 1 minute.

Clock/Timer pg021-pg044_MCD299-98-Eng-B 37 2007.9.27, 13:05

37

Specifications

AMPLIFIER

Output power ............................................. 140 W RMS

Signal-to-noise ratio .......................................

≥ 60 dBA

Frequency response ...... 150 – 20000 Hz, ± 3 dB

Input sensitivity AUX ....................... 0.5 V (max. 2 V)

Impedance loudspeakers ......................................... 6 Ω

Impedance headphones .................... 32 Ω -1000 Ω

DVD PLAYER

Laser Type ................................................ Semiconductor

Disc Diameter .............................................. 12cm / 8cm

Video Decoding ........................... MPEG-2 / MPEG-1

Video DAC ................................................................ 10 Bits

Signal System ............................................... PAL / NTSC

Video Format ..................................................... 4:3 / 16:9

Video S/N ........................................... 56 dB (minimum)

Composite Video Output ................ 1.0 Vp-p, 75 Ω

Audio DAC .......................................... 24 Bits / 96 kHz

Frequency Response .... 4 Hz - 20 kHz (44.1kHz)

...................................................... 4 Hz - 22 kHz (48kHz)

...................................................... 4 Hz - 44 kHz (96kHz)

Digital Output .........................................................................

....... SPDIF (Sony Philips digital interface) Coaxial

Number of programmable tracks ......................... 20

Signal-to-noise ratio .......................................

≥ 60 dBA

Channel separation ..........................

≥ 40 dB (1 kHz)

Total harmonic distor tion ............... < 0.1% (1 kHz)

USB PLAYER

USB ................................................................... 12Mb/s, V1.1

......................................... support MP3 and WMA files

Number of albums/folders ................. maximum 99

Number of tracks/titles ...................... maximum 999

TUNER

FM wave range ................................... 87.5 – 108 MHz

Sensitivity at 75 Ω

– mono, 26 dB signal-to-noise ratio ............ 2.8 µV

– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV

Tuning grid ............................................................ 9/10 kHz

Selectivity .................................................................

≥ 15 dB

Total harmonic distortion .....................................

≤ 5%

Frequency response ............ 40 – 5000 Hz (-6 dB)

Signal-to-noise-ratio ......................................

≥ 58 dBA

SPEAKERS

Front Speakers

Impedance ........................................................................ 6 Ω

Sensitivity .............................................................. 80 ± 4dB

Frequency response ............................. 150Hz-20kHz

Dimensions .... 171 (W) x 297 (H) x 89 (D) mm

Weight ......................................................... 1.265 kg/each

Subwoofer

Subwoofer (not magnetically shielded design) .....

.................................................................................................... 8”

Impedance ........................................................................ 8 Ω

Output power ........................................................... 80 W

Dimensions (w x h x d) ....................................................

..................................... 220 mm x 350 mm x 357 mm

Weight ......................................................................... 9.66 kg

GENERAL INFORMATION

AC Power ........................... 110 – 127 / 220 – 240 V;

....................................................... 50/60 Hz Switchable

Dimensions (w x h x d) .. 450 x 335 x 115 (mm)

Weight (with/without speakers) ....... 5.63 / 3.1 kg

Standby power consumption ............................

≤ 4W

Specifications and external appearance are subject to change without notice.

38 pg021-pg044_MCD299-98-Eng-B 38 2007.9.27, 13:05

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

No power.

Problem

NO DISC” is displayed.

No picture.

Solution

✔ Check if the AC power cord is properly connected.

Check if the disc is inserted upside down.

Wait until the moisture condensed at the lens has cleared.

Replace or clean the disc, see “Maintenance”.

Use a readable disc or correctly recorded format

MP3-CD.

Select the appropriate video input mode on the

TV set.

Check if the TV set is switched on.

Check the video connection.

Check if the system is securely connected.

If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see “Preparations-Setting up

Progressive Scan feature” for proper progressive scan setup.

Distorted or poor picture.

The aspect ratio of the screen cannot be changed even though you have set the TV shape.

Sometimes a slight picture distor tion may appear.

This is not a malfunction.

Clean the disc.

The aspect ratio is fixed on the DVD disc.

The aspect ratio may not be changed for some

TV systems.

pg021-pg044_MCD299-98-Eng-B 39 2007.9.27, 13:05

39

Troubleshooting

Problem

The DVD player does not start playback.

The DVD player does not respond when buttons are pressed.

The language for the sound or subtitle cannot be changed when playing a DVD.

No image is output when a function is selected.

Sound cannot be heard or is of poor quality

Poor radio reception.

Solution

Insert a readable disc.

Check the disc type, color system and region code.

Clean the disc.

Place the disc with the playback side inwards.

Press SYSTEM MENU to turn off the setup menu.

Cancel the parental control rating function or change the rating level.

Moisture has condensed inside the system.

Remove the disc and leave the system turned on for about an hour.

✔ Disconnect the power plug from the jack, and insert again.

Multi-language sound or subtitle is not recorded on the DVD.

Changing the language for the sound or subtitle is prohibited on the DVD.

Make sure the component is connected correctly.

Press the correct function button for the input source.

Adjust the volume.

Check that the speakers are connected correctly.

Check if the stripped speaker wire is clamped.

If the system is in pause, slow motion or fast forward/reverse mode, press 2; to resume the normal play mode.

Make sure the MP3-CD was recorded within 32-

256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

Ensure that the DTS disc also supports Dolby

Digital output.

If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

Increase the distance between the System and your TV set or VCR.

40 pg021-pg044_MCD299-98-Eng-B 40 2007.9.27, 13:05

Problem

Left and right sound outputs are reversed.

The remote control does not function.

The timer is not working

The Clock/Timer setting is erased

Some files on the USB device are not displayed.

Troubleshooting

Solution

✔ Check the speaker connections and location.

Point the remote control at the remote control sensor of the unit.

Reduce the distance to the player.

Remove any possible obstacles.

Replace the batteries with new ones.

Check that the batteries are loaded correctly.

✔ Set the clock correctly.

✔ Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

✔ Check if the number of folders exceeds 99 or the number of titles exceeds 999.

pg021-pg044_MCD299-98-Eng-B 41 2007.9.27, 13:05

41

42

Glossary

Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right.

Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is

4:3, and that of wide-screens is 16:9.

AUDIO OUT Jacks: Jacks on the back of the

DVD System that send audio to another system

(TV set, Stereo, etc.).

Bit Rate: The amount of data used to hold a given length of music; measured in kilobits per second, or kbps. Or, the speed at which you record. Generally, the higher the bit rate the better the sound quality. However, higher bit rates use more space on a Disc.

Chapter: Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters. Each chapter is assigned a chapter number enabling you to locate the chapter you want.

Component Video Out Jacks: Jacks on the back of the DVD System that send high-quality video to a TV set that has Component Video In jacks (R/G/B, Y/Pb/Pr, etc.).

Disc menu: A screen display prepared for the selection of images, sound, subtitles, multi-angles, etc recorded on a DVD.

Digital: Sound that has been converted into numerical values. Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks. These jacks send audio through multiple channels, instead of just two channels as analog does.

Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right and center).

DTS: Digital Theater Systems. This is a surround sound system, but different from Dolby Digital.

The formats were developed by different companies.

JPEG: A still-picture data compression system proposed by the Joint Photographic Expert

Group, which features small decrease in image quality in spite of its high compression ratio.

MP3: A file format with a sound data compression system, “MPE” is the abbreviation of

Motion Picture Experts Group 1 (or MPEG-1)

Audio Layer 3. Through the MP3 format, one

CD-R or CD-RW can contain about 10 times as much data volume as a regular CD can.

pg021-pg044_MCD299-98-Eng-B 42

Multichannel: DVD is specified to have all sound tracks constitute one sound field.

Multichannel refers to a structure of sound tracks having three or more channels.

Parental control: A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country.

The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software’s level is higher than the user-set level.

PCM (Pulse Code Modulation): A system for converting analog sound signal to digital signal for later processing without data compression.

Playback control (PBC): Refers to the signal recorded on video CDs or SVCDs for reproduction control. By using screen menus recorded on a Video CD or SVCD that supports

PBC, you can enjoy interactive-type software as well as software having a search function.

Progressive Scan (P-Scan): It displays all the horizontal lines of a picture at one time, as a signal frame. This system can convert interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. A progressive scan TV set is needed to receive progressive scan output from the system.

Region code: A system allowing discs to be played only in preset regions. This unit will only play discs that have compatible region codes. You can find the region code of your unit from the product label. Some discs are compatible with more than one region (or ALL regions).

S-Video: Produces a clear picture by sending separate signals for luminance and the color. You can use S-Video only if your TV set has S-Video

In jack.

Sampling Frequency: Frequency of data sampling when analog data is converted to digital data. Sampling frequency numerically represents how many times the original analog signal is sampled per second.

Surround: A system for users to create realistic three-dimensional sound fields full of realism by arranging multiple speakers around the listener.

Title: The longest section of a picture or music feature on DVD, music, etc., in video software, or the entire album in audio software. Each title is assigned a title number enabling you to locate the title you want.

VIDEO OUT jack: Jack on the back of the

DVD System that sends video to TV.

2007.9.27, 13:05

Appendix

How to mount your system onto wall

IMPORTANT!

– The wall mounting instructions are for use by the qualified wall mounting person only!

– Ask a qualified person to help you with the wall mounting, which includes drilling holes on the wall and mounting the set onto wall.

What’s in the supplied mounting kit

Mounting your main unit onto wall

1

Align the template in the chosen location on a wall. Use a pencil to mark the drilling positions

(as shown).

164 mm

2

Drill two 6mm diameter holes as marked.

3

Secure the dowels and screws in the holes respectively, leaving the screws 5mm proud of the wall.

1 x template

164 mm

6 x screws and dowels

2 x speaker brackets

What else you’ll need

4

To detach the stand from the main unit, a. As shown, hold down PRESS

4.

b. Move out the stand to detach.

– Drilling tools (e.g. an electric drill)

Preparation

1

Find a suitable location for mounting and complete necessary rear connections (see

Preparations).

2

Ask a qualified person to help you with the wall mounting, who should:

– to avoid unexpected damage, learn about the piping, wiring and other relevant information inside your wall;

– according to the drilling requirements, choose suitable drilling tools;

– take other precautions necessary for the wall mounting work.

1

5

Hang the main unit on the fastening screws.

43 pg021-pg044_MCD299-98-Eng-B 43 2007.9.27, 13:05

Appendix

Mounting your speakers onto wall

The supplied speaker brackets enable you to mount your speakers onto wall too.

1

Position the brackets on the wall where you want to hang the speakers one by one. Drill 2 holes slightly undersized for each bracket to ensure a firm fit.

2

Secure each bracket on the wall using 2 dowels and 2 screws (supplied).

3

Detach the speaker stands in the same way as you do the main unit stand.

4

Hang the speakers on the brackets securely.

44 pg021-pg044_MCD299-98-Eng-B 44 2007.9.27, 13:05

一般事项

功能特点 .........................................................................

47

适合播放的光碟 ............................................................

47

区域编码 .....................................................................................

47

随机配件 .........................................................................

48

环保讯息 .........................................................................

48

维护保养与安全须知 ..................................................

48

安装

步骤 1 :连接扬声器 ....................................................

50

步骤 2 :连接天线 .........................................................

50

步骤 3 :连接电视机 ....................................................

51

使用 AV OUT 音频视频输出插口 ......................................

51

使用 Y Pb Pr OUT 色差视频插口 ......................................

51

步骤 4 :放置本机和扬声器 .......................................

52

步骤 5 :连接电源线 ....................................................

52

附加连接:连接其它设备 .........................................

52

观看和收听 USB 设备之外的其它设备的播放内容 ........

52

使用 VCR 录制 DVD ................................................................

53

连接 USB 装置或储存卡 ..........................................................

53

控制键

主机上的控制键 ............................................................

54

遥控器上的控制键 .......................................................

54

准备

步骤 1 :装入遥控器电池 ...........................................

56

使用遥控器操作本机 ...............................................................

56

步骤 2 :设定时钟 .........................................................

56

步骤 3 :设定所需视频 ................................................

57

设定 TV Type (电视机制式) ............................................

57

设定 TV Display (电视机形式) .......................................

57

设定逐行扫描功能(只用于逐行扫描电视机逐行 扫描)

........................................................................................................

58

步骤 4 :设定所需语言 ................................................

58

基本功能

即插即播(用于收音机安装) ................................

60

开机 / 关机 ........................................................................

60

省电自动待机 ................................................................

60

音效控制 .........................................................................

60

DBB (动态低音增强) .........................................................

60

DSC (数码音效控制) .........................................................

60

音量控制 .........................................................................

60

调节显示屏亮度 ............................................................

61

功能介绍模式 ................................................................

61

目录

光碟操作

播放光碟 .........................................................................

62

使用光碟选单 ................................................................

62

基本播放控制 ................................................................

62

暂停播放( DVD/VCD/CD/MP3/WMA ) ..................

62

选择歌曲、章节或标题( DVD/VCD/CD/MP3/

WMA ) ......................................................................................

63

从上次停止位置恢复播放( DVD/VCD/CD/MP3/

WMA ) ......................................................................................

63

缩放( DVD/VCD/JPEG ) ..................................................

63

不同的播放模式: SHUFFLE 和 REPEAT ( DVD/VCD/

CD/MP3/WMA ) ..................................................................

63

重复 A-B ( DVD/VCD/CD/MP3/WMA ) ..................

63

慢动作播放( DVD/VCD ) ................................................

63

编程(图片 CD 无此功能) ..................................................

63

向前

/

向后搜索(

DVD/VCD/CD/MP3/WMA

) .......

64

根据时间、章节或歌曲目号搜索( DVD/VCD/CD/

MP3/WMA ) ...........................................................................

64

播放过程中的讯息显示( DVD/VCD/CD/MP3/

WMA ) ......................................................................................

64

光碟特殊功能 ................................................................

64

播放标题( DVD ) .................................................................

64

摄影机角度( DVD ) .............................................................

64

更换音频语言(仅限以多种语言录制的 DVD ) ..........

64

更换声道(仅限于 VCD ) ....................................................

64

字幕( DVD ) ..........................................................................

64

播放 MP3/WMA 光碟 .................................................

65

一般操作 .....................................................................................

65

播放选择 .....................................................................................

65

播放 JPEG 图片光碟 ......................................................

65

一般操作 .....................................................................................

65

播放选择 .....................................................................................

65

JPEG 图片光碟特殊功能 ............................................

66

缩放图片( JPEG ) ..................................................................

66

幻灯片播放模式( JPEG ) ....................................................

66

多角度播放(

JPEG

) .............................................................

66

45 pg045-pg059_MCD299-98-Chi-A 45 2007.9.27, 13:05

目录

系统选单选项

基本操作 .........................................................................

67

通用设定页 .....................................................................

67

显示语言 .....................................................................................

67

屏幕保护 .....................................................................................

67

音频设定页 .....................................................................

67

夜间模式 .....................................................................................

67

数码输出 .....................................................................................

67

杜比数码设定 ............................................................................

68

视频设定页 .....................................................................

68

电视机形式 .................................................................................

68

逐行扫描 .....................................................................................

68

电视机制式 .................................................................................

68

初期设定页 .....................................................................

68

音频 ...............................................................................................

68

字幕 ...............................................................................................

69

碟片选单语言 ............................................................................

69

年龄控制 .....................................................................................

69

密码设定 .....................................................................................

69

出厂设定 .....................................................................................

70

电台接收

调谐选台 .........................................................................

71

预设电台 .........................................................................

71

自动预设电台 ............................................................................

71

手动预设电台 ............................................................................

72

选择预设电台 ................................................................

72

改变调谐频阶(仅限于某些机种) .......................

72

外部音源

使用非 USB 装置 ............................................................

73

使用 USB 大容量储存装置 .........................................

73

计时器

75

计时器设定 .....................................................................

75

关机计时器设定 ............................................................

76

技术规格

.....................................................................

77

故障排除

............................................................

78~80

术语集

..........................................................................

81

附录

如何把本机安装在墙上 ..............................................

82

随附的装墙套件内有何物件? ............................................

82

您还需要甚么 ............................................................................

82

准备工作 .....................................................................................

82

将主机安装到墙上 ...................................................................

82

将扬声器安装到墙上 ...............................................................

83

46 pg045-pg059_MCD299-98-Chi-A 46 2007.9.27, 13:05

感谢您的惠顾,欢迎光临飞利浦!

为了您能充分享受飞利浦提供的支持,请在下面的

页面注册您的产品: www.philips.com/welcome!

功能特点

这套 DVD 微型音响组合配有 2.1

声道全数码放大

器,可营造出在影院中方可体验到的动感音质;并

且融合了部分家庭影院的最佳功能。

其它功能特点包括:

内置杜比数码解码器,支持超凡环绕声和 DSC 音

效设定。

其它可选元件连接

您可以通过将本系统与其它音讯或音 / 视讯组件相

连使用本系统的环绕声扬声器。

年龄控制(分级)

你可以为你的孩子设置影片分级使他们无法观看任

何高于你所设级别的 DVD 影碟。

关机定时器

系统可以根据预定的时间自动切换至待机模式。

夜间模式

你可以使用动态范围压缩以减少杜比数码模式下不

同声音的响度差异。

逐行扫描

逐行扫描为建基于影片的讯源提供无闪烁的高画质

影像。当一张图片刷新时,其垂直分辨率可倍增至

525 线。

注意:

为了充分享受逐行扫描功能,您需要具备一台

逐行扫描电视机。

适合播放的光碟

你的 DVD 系统可播放:

– 数码视频光碟( DVD )

– 视频 CD ( VCD )

– 超级视频 CD ( SVCD )

– 数码视频光碟 + 可重覆刻录光碟

( DVD+RW )

– 雷射唱碟( CD )

– CD-R ( W )上的图片( Kodak 、 JPEG )文件

– Windows Media Audio ( WMA )

– 支持的 MP3-CD 格式:

一般事项

• ISO 9660/UDF

• 标题 /

格式

曲目集名称 ?

最多 10 个字符。

• 最大的标题数 + 曲目集数为 255 。

• 嵌入目录最多为 8 层。

• 最大的曲目集数为 32 。

• 最大的 MP3 曲目数为 999 。

• 支持的 MP3 光碟取样频率: 32 kHz 、 44.1

kHz 、 48 kHz 。 .

• 支持的 MP3 光碟比特率: 32 、 64 、 96 、 128 、

192 、 256 ( kbps )。

本机不支持下列格式:

• 像 *.VMA

、 *.AAC

、 *.DLF

、 *.M3U

、 *.PLS

*.WAV

等文件;

• 以 Joliet 格式录制的光碟。

区域编码

DVD 光碟上须具有如下区域编码标志才能在本

DVD 系统上播放。使用其它区域编码的光碟无法

在本机上播放。

ALL 3

注意:

对于混合模式的光碟,根据其录制格式,只有

一个格式会被选择播放。

如果你播放某张光碟时有困难,请先取出该光

碟并尝试播放另一张不同的光碟。录制格式不正确

的光碟将不能在本 DVD 系统中播放。

47 pg045-pg059_MCD299-98-Chi-A 47 2007.9.27, 13:05

一般事项

随机配件

– A/V 音频视频线(红 / 白 / 黄)

– 色差视频电缆(红 / 蓝 / 绿)

FW 拖尾天线

MW 环形天线

15针 D-Sub 电缆

– 主机和扬声器支座

– 墙上安装指南

– 遥控器

– 本使用说明书和快速启用指南。

切勿堵塞通风口

● 不要在密闭的机箱中操作本系统。播放机四周必须

留有最少 10 厘米( 4 英 ?

)的空隙,以确保良好的通

风。

● 通风孔不应覆盖诸如报纸、桌布和窗帘等物品而妨

碍通风。

清洁机壳

● 使用一块稍微沾有中性清洁剂的软布抹擦。请勿使

用带有酒精、氨水或磨砂物质的清洁剂。

环保讯息

我们已把多余的包装材料省掉。并尽量使包装物容

易分为如下三种材料:纸板(纸箱)、聚苯乙烯泡

沫塑料(减震)和聚乙烯(包装袋和保护性泡沫胶

纸)。

若由专业公司进行拆卸,你这台产品中含有的某些

材料可再循环使用。在处理这些废弃的包装材料、

耗尽电池及旧设备时,请遵守当地的有关法规。

清洁光碟

● 当光碟比较肮脏时,应该用一块

不起毛的清洁布来抹擦。抹擦时

应从中央向外抹擦,而不要沿圆

周方向抹擦。清洁剂可能会损害

光碟。

● 只可在光碟的印刷商标面写字,

而且必须使用柔软的笔尖。

● 拿取光碟时应握持其边缘,不要触摸其表面。

维护保养与安全须知

避免高温、潮湿、水和灰尘

● 勿让本系统、电池或光碟暴露在潮湿、雨淋和多尘

的环境,也不要将它们放置在加热设备附近或阳光

直射的场所,以免过度受热。

● 在本机上不应放置诸如花瓶一类的装满液体的物

品。

● 在本机上不应放置裸露的火焰源,如点燃的蜡烛。

● 勿让本机遭受水滴或水溅。

● 使用耳机时过高的声压可能会损伤你的听力。

● 勿让电池暴露在过热的环境,例如有阳光照射或火

源等的场所。

找寻适合的放置地点

● 将光碟机放置在一个平坦、坚实而稳定的表面上。

● 将本机安装在交流电源插座附近,以便于插拔交流

电源插头。

避免冷凝问题

● 当播放机从较冷的环境突然被搬移到较暖的环境

时,机内的镜头可能蒙上水汽,这时将不能播放光

碟。如果出现这种情况,可让播放机在温暖的环境

中静置一段时间,直至水汽自然蒸发为止。

48 pg045-pg059_MCD299-98-Chi-A 48 2007.9.27, 13:05

安装

交流电源线

AUDIO

IN

S-VIDEO

IN

VIDEO IN

TV IN

FM

拖尾天线

AUDIO

S-VIDEO

VIDEO IN

TV IN

MW

环形天线

AC CORD

扬声器

(右)

扬声器

(左)

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

重要事项!

– 铭牌位于本机背面。

– 位于本机底部的电压选择开关已被厂家预设为

220V-240V 。若你所在的国家使用 110V-

127V 电压,请在开启本机前将电压选择开关的电

压设定为 110V-127V 。

– 在把交流电源线连接至墙上的交流电源插座之

前,必须确保所有其它连接事项已经完成。

– 开启电源后,切勿进行或更改任何连接。

– 高电压!不要打开机盖,否则会遭受电击的危

险。

– 机内并无任何可供用户修理的零件。

– 自行改动本机可招致有害的 EMC 辐射或其他

不安全的操作情况。

为避免本机过热,机内设有安全电路。所以当本机

出现极限状况时,它将会自动切换至待机状态。如

果出现这种情况,应让本机冷却后再使用(仅限于

某些版本)。

注意:

安装完成之前,最好不要将附贴在前面板表面

上的塑料保护薄膜去除,以免在安装过程中刮伤本

机。 pg045-pg059_MCD299-98-Chi-A 49 2007.9.27, 13:05

49

安装

步骤

1

:连接扬声器

AC CORD

步骤

2

:连接天线

将随机供应的 MW 环形天线和 FM 天线连接至所属

的终端上。调整天线位置以取得最佳接收效果。

MW 天线

● 将天线放置在尽可能远离电视机、录像机或其他辐

射源的地方。

SPEAKERS 6

R

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

1

将主机放置在一个坚稳的平面上(机体前面朝

下)。

2

将两条前置扬声器电缆连接到 SPEAKERS (6 )

端子:右扬声器接“ R ”端子,左扬声器接“ L ”

端子。

3

移开主机左下方的可拆式盖板露出 CONNECT

TO SUB WOOFER 端子。

4

使用随机附送的 15针 D-Sub 电缆将主机的

CONNECT TO SUB WOOFER 端子连接到重低

音扬声器的 CONNECT TO MAIN SET 端子

(针脚须对准)。收紧连接器上的两支螺丝,确

保连接紧固。

5

装上可拆式盖板直至听到“喀呖”一声。

注意:

确保扬声器连接导线正确连接。错误的连接可

能会引起短路从而造成设备损坏。

为确保最佳音效,请使用随附的扬声器。

切勿把一对以上的扬声器连接至任何一对扬声

器的 +/端子。

所连接扬声器的阻抗不能低于随附扬声器的额

定阻抗。请参阅本使用说明书内的“技术规格”

一节。

随机附送的 15针 D-Sub 电缆仅供本机使用,请

不要用于连接其它设备(例如,不要用于电脑的

连接)。

FM 天线

1

2

● 如要取得更佳的 FM 立体声接收效果,可将一条户

外 FM 天线连接至 FM ANTENNA 端口。

50 pg045-pg059_MCD299-98-Chi-A 50 2007.9.27, 13:05

步骤

3

:连接电视机

重要事项!

– 本系统与电视机相连的方式有多种。您只需根

据电视机的类型选择一个最佳的连接方式。

– 将本 DVD 系统直接连至电视机。

使用 AV OUT 音频视频输出插口

安装

使用 Y Pb Pr OUT 色差视频插口

重要事项!

– 只有使用 Y Pb Pr 色差视频插口连接才能获得

逐行扫描的高画质,而且需要一台逐行扫描电视

机。

R

AUDIO

IN

S-VIDEO

IN

VIDEO IN

TV IN

AUDIO S-VIDEO

VIDEO IN

TV IN

R

SPEAKERS 6 Ω

Y/Pb/Pr OUT

L

A/V OUT

CONNECT TO SUB WOOFER

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

1

将随附的 AV 音频视频线一端的单一插头连接到

DVD 系统的 AV OUT 插口。

2

将该 AV 音频视频线另一端的视频输出插头(黄

色)连接到电视机上的视频输入插口(或标示为

A/V In 、 CVBS 、 Composite 或 Baseband 的插

口)。要通过电视机聆听 DVD 系统的声音,须将

音频视频线的音频输出插头(白色 / 红色)连接到

电视机上的音频输入插口。

1

使用色差视频电缆(红色 / 蓝色 / 绿色-不随本机供

给)将 COMPOENT VIDEO OUTPUT ( Pr/Cr

Pb/Cb Y ) 插口连接到电视机上对应的 Component video input 色差视频输入插口(或标示为 Y Pb/Cb

Pr/Cr 或 YUV 的插口)。

2

如果你正在使用逐行扫描电视机(电视机必须指示

具有 Progressive Scan 或 ProScan 能力),要启动

电视机的逐行扫描功能,请参阅你电视机的用户手

册。关于 DVD 系统的逐行扫描功能,见“准备-

设定逐行扫描功能”。

注意:

如果你的电视机不支持逐行扫描,你将无法观

看画面。 pg045-pg059_MCD299-98-Chi-A 51 2007.9.27, 13:05

51

安装

步骤

4

:放置本机和扬声器

使用随机附带的可拆式支座和墙上安装套件,你既

可以将主机和扬声器放置在桌面上也可以将它们安

装到墙上。此处以桌面安装为例进行描述。如需将

本系统安装到墙上,请参照“附录”以及随机附带

的“墙上安装指南”。

1

将尺寸稍大一些的支座上具有 PRESS

4 标志的一

侧对准主机底部的插槽。

步骤

5

:连接电源线

正确完成所有连接之后,将重低音扬声器背面的交

流电源线插入墙上的交流电源插座。

开启电源后,切勿再插入、拔出连接。

附加连接:连接其它设备

观看和收听 USB 设备之外的其它设备的播放内容

AUDIO OUT

L R

2

将支座从底部推入槽中,直至听到“喀呖”一声。

3

以同样的方式将两个尺寸稍小一些的支座装到扬声

器上。

4

将主机和扬声器连支座直立放置在桌面上。

注意:

要从机上或任一扬声器上卸下支座,在按下

PRESS 4的同时将支座从槽中拉出即可。

VCR

(for example)

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

CONNECT TO SUB WOOFER

● 将此系统的 AUX IN (R/L) 插口与其它音频或视频

设备(如电视机、 VCR 录影机、激光唱碟机或卡

带座)的AUDIO OUT 插口相连。

● 操作前,请首先按前面板上的 SOURCE 键选择

AUX 或按遥控器上的 AUX 键以激活输入源。

52 pg045-pg059_MCD299-98-Chi-A 52 2007.9.27, 13:05

安装

使用 VCR 录制 DVD

VIDEO IN

连接 USB 装置或储存卡

重要事项!

– 请在连接 USB 接头前先移

护盖。

插口上的保

VCR

R

SPEAKERS 6 Ω

L

Y/Pb/Pr OUT

A/V OUT

AUDIO IN

L

R

只要将一台 USB 大容量储存装置(包括 USB 快闪储

存器、 USB 闪存盘或储存卡)连接到本 Hi-Fi 系

统,您就可透过 Hi-Fi 系统的强效扬声器享受该装

置中所储存的音乐。

将 USB 装置的 USB 插头插入机上的 插口。

用于带有 USB 电缆的装置:

1

将 USB 电缆(不随本机供给)的一个插头插入机上

的 插口。

2

将 USB 电缆的另一个插头插入该 USB 装置的 USB 输

出端子。

CONNECT TO SUB WOOFER

1

将随机所附的 AV 音频视频线一端的单一插头连接

到 DVD 系统的 A/V OUT 插口。

2

将该 AV 音频视频线另一端的视频输出插头(黄

色)连接到 VCR 录像机上的 VIDEO IN 插口,并将

音频视频线的音频输出插头(白色 / 红色)连接到

VCR 录像机上对应的音频输入插口。这样您便可

制作模拟立体声(左和右两声道)的录音。

用于储存卡:

1

将储存卡插入一个读卡器(不随本机供给)中。

2

使用一条 USB 电缆(不随本机供给)将读卡器连接

到机上的 插口。 pg045-pg059_MCD299-98-Chi-A 53 2007.9.27, 13:05

53

控制键

主机上的控制键

1

STANDBY-ON y

– 开启系统或切换至待机状态。

2 显示屏

显示 DVD 播放机当前的状态。

3

LEFT ç

– 打开或关闭左边的光碟门。

4 RIGHT ç

– 打开或关闭右边的光碟门。

5 iR SENSOR

IR 红外线信号接收器。

6

VOLUME -/+

调整音量水平。

7

光碟托盘

8

模式选择

à / á

收音机 .................................. 调谐选台。

* 光碟 /USB ........................ 在曲目或光碟中以不同的速

度向后 / 向前搜索。

时钟 / 计时器 ..................... 调整小时数值。

9 ................................................ 停止光碟播放或删除一个曲

目程式。

ÉÅ ...................................... 开始播放或暂停播放。

¡ / ™

收音机 .................................. 选择一个预设电台。

光碟 /USB ........................... 跳至上一个 / 下一个章节 / 标

题 / 曲目。

时钟 / 计时器 ..................... 调整分钟数值。

9

DISC 1/2/3/4

– 选择一个光碟托盘进行播放。

0

CLOCK

待机模式

* – 设定系统时钟。

播放模式

– 显示系统时钟。

!

SOURCE

– 选择以下音源:光碟( DISC )、 USB 、 FM 或 MW

收音机( TUNER )或外部音源设备( AUX )。

@ DSC•DBB

* – 选择不同类型的声音均衡器预设定: FLAT (不选

择)、 POP (流行)、 CLASSIC (古典)、

ROCK (摇滚)或 JAZZ (爵士)。

开启或关闭低音增强功能。

# USB DIRECT

– 连接外部大容量 USB 储存装置的插口。

遥控器上的控制键

1

STANDBY-ON y

– 开启系统或切换至待机状态。

2 数字键( 0 - 9 )

– 输入光碟的曲目 / 标题 / 章节编号。

3 PROGRAM

DVD/VCD/CD/MP3-CD/USB: 进入程式选单。

图片 CD :在播放过程中,选择一个幻灯片播放模

式。

收音机:预设电台。

4

SOURCE

– 选择以下音源:光碟( DISC )、 USB 、 FM 或 MW

收音机( TUNER )或外部音源设备( AUX )。

5

SYSTEM MENU (仅用于光碟模式)

– 进入或退出系统选单条。

6

DISC MENU (仅用于光碟模式)

DVD/VCD: 进入或退出光碟内容选单。

VCD2.0: 开启或关闭播放控制模式。

7

à / á

收音机

– 按下此键逐步调谐到较低或较高的电台频率。

– 按住此键然后放开,开始向下 / 向上自动搜索电台

频率。

光碟 /USB

– 快速向后 / 向前搜索。

– 在光碟模式,在光碟选单或系统选单条中选择移动

方向。

– 时钟 / 计时器模式下调整小时数值。

8 3 / 4

– 在光碟模式,在光碟选单或系统选单条中选择移动

方向。

– 为 VCD/SVCD/DVD 光碟选择不同的慢播模式。

* = 按住该键三秒以上。

54 pg045-pg059_MCD299-98-Chi-A 54 2007.9.27, 13:05

9 OK

退出或确认所作的选择。

0 í / ë

– 光碟:跳至上一个 / 下一个章节 / 标题 / 曲目

收音机:选择一个预设电台。

时钟 / 计时器模式下调整分钟数值。

!

9

– 在光碟 /USB 模式,停止播放或删除一个曲目程

式。

@ 2;

– 在光碟 /USB 模式,开始播放或暂停播放。

#

VOL +/-

调高或调低音量。

$

MODE

– 为光碟选择不同的重复或乱序播放模式。

%

SUBTITLE

– 选择字幕语言。

^

TIMER/SLEEP

待机模式

– 设定自动关机时间。

开机模式

设定睡眠关机计时器功能(自动关机)。

&

DISC 1/2/3/4

– 选择一个光碟托盘进行播放。

* DSC/DBB

* – 选择不同类型的声音均衡器预设定: FLAT (不选

择)、 POP (流行)、 CLASSIC (古典)、

ROCK (摇滚)或 JAZZ (爵士)。

– 开启或关闭低音增强功能。

(

L ç / R ç

– 打开或关闭左边 / 右边的光碟门。

)

MUTE

– 暂停或恢复声音重放。

¡ DISPLAY/OSD

– 播放过程中在电视机屏幕上显示相关讯息。

™ A-B

用于 VCD/CD/USB :重复播放同一首曲目中的某

个段落。

– 用于 DVD :重复播放光碟上的某个段落。

控制键

£

DIM

– 选择不同的显示屏亮度。

AUDIO

用于 VCD

设定立体声、左单声或右单声道模式。

用于 DVD

– 选择一种音频语言。

∞ ZOOM

DVD/VCD/ 图片 CD :在电视屏幕上放大或缩小一

帧图片或者活动影像。

§ ANGLE/RDS (此版本无 RDS 功能)

* – DVD :选择 DVD 的摄像机角度。

≥ GOTO

– 在光碟模式,输入一个时间、标题、章节或曲目号

在一张光碟中进行快速搜索。

遥控器使用注意事项:

– 首先按遥控器上的其中一个声源选择键(如:

DISC 或 TUNER )选择你想要控制的声源。

– 然后选择所要的功能(如:2; , í , ë )。 pg045-pg059_MCD299-98-Chi-A 55

* = 按住该键三秒以上。

2007.9.27, 13:05

55

准备

重要事项!

– 开始操作本机之前,必须确保准备已全部完

成。

步骤

1

:装入遥控器电池

3

2

1

1

打开电池盒。

2

根据电池盒里的 +/标示装入两节 AAA 型号电池。

3

关上电池盒盖。

使用遥控器操作本机

1

将遥控器直接对准前面板上的 IR

红外线遥控信号接收器。

2

操作本 DVD 播放机时,请不要在

遥控器和本机之间放置任何障碍

物。

步骤

2

:设定时钟

本系统可以设定为 12 或 24 小时时钟制式。

1

在待机模式下,按住前面板上的 CLOCK 键。

2

按 à / á 键设定小时。

3

按 í / ë 键设定分钟。

4

按 PROGRAM 键选择时钟制式。

5

按 CLOCK 键确定时钟设定。

注意:

系统电源切断后,所作的时钟设定将会被删

除。

如果 90 秒内未操作任何按钮,系统将退出时钟

设定模式。

小心!

– 如果电池电量耗尽或长时间内将不使用遥控器

时,请将电池取出。

– 切勿将新电池与旧电池或不同类型的电池混合

使用。

– 电池含有化学物质,因此用后请予以妥善的弃

置处理。

56 pg045-pg059_MCD299-98-Chi-A 56 2007.9.27, 13:05

步骤

3

:设定所需视频

重要事项!

– 确定你已完成所有必要的连接。(见“连接 连

接电视机”。)

准备

设定 TV Display (电视机形式)

选择所连接电视机萤幕画面的长宽比。

4:3 PAN SCAN (摇镜与搜寻模式 ?

中间截取)

– 如果你所用的是传统电视机,而且你的 DVD 影

碟没有被格式化以供宽屏幕观看,请使用这个设

定。在这种模式中,一张宽的图片会以中间截取方

式(边缘部分自动切除)显示 s 在整个电视萤幕

上。

– – Video Setup Page – –

TV Display

PROGRESS

TV Type PAL

Multi

NTSC

开启电视机并设置到正确的视频输入频道。

➜ 你可先到电视机的频道 1 ,然后重复按频道键直

至看到视频输入频道。

➜ 或者,你可使用电视机遥控器选择不同的视频

模式。

➜ 或者,若你使用 RF 调制器,请将电视机设定至

频道 3 或 4 。

1

在停止模式或播放期间,按 SYSTEM MENU键。

2

按遥控器上的à / á /

5

/

4

键浏览各项功能并选择

你所需的项目。

➜ 移至 Video Setup Page (视频设定页)并按4

键。

➜ 移至以下其中一项并按 á键。

设定 TV Type (电视机制式)

你可选择与你所用电视机相配合的颜色系统。

PAL

– 若所连接的电视机是 PAL 制式,请选择此项。

它会改变 NTSC 光碟的视频讯号并以 PAL 格式输

出。

Multi

– 若所连接的是多制式电视机,请选择此项。在

此模式中,输出格式将与光碟的视频讯号相一致。

NTSC

– 若所连接的电视机是 NTSC 系统,请选择此

项。它会改变 PAL 光碟的视频讯号并以 NTSC 格式

输出。

4:3 LETTER (信箱模式 上下黑边)

– 如果你所用的是传统电视机,而且你的 DVD 影

碟已被格式化以供宽屏幕观看,请使用这个设定。

在这种模式中,电视萤幕的上下方会出现黑边。

16:9 (宽屏幕电视模式)

如果你所用的是宽屏幕电视机,而且影碟上有这

项设定,请予以使用(你必须同时将你的宽屏幕电

视机设定至“全屏幕”)。然后,本机将会使用影

碟本身的偏好设定。

注意:

你所选的格式必须在影碟中。如果没有,这项

电视形式的设定在播放过程中将不会对电视画面产

生任何影响。

要退出此选单

再按SYSTEM MENU键。

57 pg045-pg059_MCD299-98-Chi-A 57 2007.9.27, 13:05

准备

设定逐行扫描功能(只用于逐行扫描电视机逐行

扫描)

每秒显示的帧数比隔行扫描(原来的正常电视系

统)多一倍。由于线数几乎多了一倍,因而逐行扫

描可提供较高的图片分辨率和品质。

重要事项!

– 要实现逐行扫描功能,事前必须确定:

1) 您的电视机能接受逐行扫描信号,因此您必需

具备一台逐行扫描电视机。

2) 您已使用 Y Pb Pr 插口将您的 DVD 播放机连接

至您的电视机(见“连接-步骤 3 :连接电视机-

使用 AV OUT 音频视频输出插口”)。

1

开启电视机。

2

关闭电视机的逐行扫描模式或开启隔行扫描模式

(请参阅您电视机的用户手册)。

3

按 STANDBY-ON B 键开启 DVD 播放机。

4

选择正确的视频输入频道。

➜ 电视机屏幕出现 DVD 背景画面。

5

SYSTEM MENU键。

6

重复按 à / á 键选择“ Video Setup Page ”(视

频设定页)。

7

移至“ Progress ”并按 á 键。

8

移至“ On ”(开)并按OK键确认。

➜ 这时,设定已经完成,您可以开始欣赏高画质

的图片了。

步骤

4

:设定所需语言

你可选择所需的语言设定。当你载入光碟时,本

DVD 系统会自动切换到你所选择的语言。若光碟

中无所选语言,系统将会使用此光碟的预设语言。

系统选单中的显示语言一旦选定将不会改变。

1

在停止模式或播放期间,按 SYSTEM MENU

键。

2

按遥控器上的 à / á /

5

/

4

键选择所需项目。

➜ 分别移至 General Setup Page (通用设定页)

和 Preference Page (初期设定页)并按

4 键。

➜ 移至以下其中一项并按 á 键。

– – General Setup Page – –

OSD Lang

Screen Saver

English

Spanish

Portuguese

Thai

Chinese

Others

OSD Lang (显示语言)(萤幕显示切换)

切换电视萤幕上的显示语言。从所显示的清单中选

择语言。

58 pg045-pg059_MCD299-98-Chi-A 58 2007.9.27, 13:05

准备

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default

English

Spanish

Portuguese

Thai

Chinese

Others

Audio (音频)(只用于 DVD )

切换声轨的显示语言。从所显示的清单中选择语

言。

Subtitle (字幕)(只用于 DVD )

切换字幕的显示语言。从所显示的清单中选择语

言。

Disc Menu (碟片选单语言)(只用于 DVD )

从 DVD 光碟选单中选择语言。

如果所选择的语言没有记录在该 DVD 光碟中,本机将

自动选择记录在光碟中的其中一种语言(显示语言

除外)。

除了级别( Rating )之外,你可以将所有的 DVD 设

定复原。若光碟中没有所选的语言,系统将选择此

光碟原来指定的语言。

3

按 5 /

4

键选择语言并按 OK .

4

重复步骤 2 ~ 3 进行其他设定。

要退出此选单

再按SYSTEM MENU键。 pg045-pg059_MCD299-98-Chi-A 59 2007.9.27, 13:05

59

基本功能

即插即播

(用于收音机安装)

即插即播( PLUG AND PLAY )功能使你能自动

储存所有可接收到的电台。

首次设置 / 通电

1

当接通电源时,“ AUTO INSTALL - PRESS

PLAY ”(自动安装-按 PLAY 键)字样显示。

2

按主机上的ÉÅ 键开始安装。

➜ “ PLUG AND PLAY ” .... “ INSTALL ”(即

插即播 ....

安装)字样显示,接著显示“ TUNER ”

(收音机)和“ AUTO ”(自动)。

PROG

标志开始闪动。

➜ 所有讯号较强的电台将被自动储存。首先是 FM

波段的电台,然后是 MW 波段的电台。

➜ 当所有电台已被储存或全部 40 个预设电台存满

后,最后一个被储存的预设电台将会播放。

开机

/

关机

● 按 STANDBY-ON B 键。

● 按遥控器上的 DISC , USB , TUNER 或 AUX 键。

➜ 系统将切换至所选的音源。

● 按前面板上的 LEFT ç 或 RIGHT ç 键(或遥

控器上的L ç 或 R ç键)。

➜ 系统将切换到碟片音源。

进行以下操作可将系统设为待机模式

● 按 STANDBY-ON B 键。

➜ 互动式音效设定、上次所选的音源以及预设电

台都会被保留在播放机的内存中。

省电自动待机

作为一项省电功能,如果在碟片播放完毕后 15 分

钟内你不操作任何控制键,本机将自动切换至待机

模式。 重新安装即插即播功能

1

在待机或功能介绍模式,按住机上的ÉÅ键直至

“ AUTO INSTALL - PRESS PLAY ”(自动安装

-按 PLAY 键)字样显示。

1

再按ÉÅ 键开始安装。

➜ 以前储存的所有预设电台都将被取代。

要退出而不储存即插即播功能

● 按机上的 9 键。

➜ 如果即插即播功能没有完成安装,在下一次开

启本机时,即插即播安装功能将再次启动。

注意:

当本机连接至电源时,光碟转盘可能会先打开

再关上,以重新启动本机。

在即插即播期间,如果本机检测不到立体声频

率,“ CHECK ANTENNA ”(检查天线)字样将

显示。

在即插即播期间,如果 15 秒内无任何键按下,

本机将退出即插即播模式。

音效控制

DBB 和 DSC 音效功能不能被同时启动。

DBB (动态低音增强)

DBB 增强低音响应。

● 按遥控器上的 DSC•DBB 键以开

能。

/

DBB

➜ 某些光碟可能使用高调制率录制,因此在

高音量时会产生失真。如果出现这种情况,

请关闭

DBB

功能或调低音量。

DSC (数码音效控制)

DSC 为你提供一种特别的预设音效均衡器设定。

重复按住遥控器上的 DSC•DBB 键选择: FLAT

(不选择)、 POP (流行)、 CLASSIC (古

典)、 ROCK (摇滚)或 JAZZ (爵士)。

音量控制

VOLUME -/+ (或按遥控器上的 VOL +/-

键调低或调高音量。

“ VOL XX ”字样显示在显示屏上。其中

“ XX ”代表音电平。

60 pg060-pg083_MCD299-98-Chi-B 60 2007.9.27, 13:08

暂时关闭声音

按遥控器上的 MUTE 键。

播放将在静音状态下继续。同时,

“ MUTING ”字样闪动。

要启动声音重放,你可以:

– 再按 MUTE 键;

– 调节音量控制器;

– 改变音源。

调节显示屏亮度

● 重复按 DIM 键以选择不同的显示屏亮度级别。

功能介绍模式

本机设有功能介绍模式,用以展示本机提供的各种

功能。

开启功能介绍模式

● 在待机模式中,按机上的 9 键开启功能介绍模

式。

➜ 功能介绍将开始。

停止功能介绍模式

● 再按机上的 9键。

➜ “ DEMO OFF ”(功能介绍关闭)字样显示。

注意:

即使你把交流电源线从墙上的插座拔下再重新

连接上,功能介绍模式仍然处于关闭状态,直到你

再次把它开启才可生效。

基本功能 pg060-pg083_MCD299-98-Chi-B 61 2007.9.27, 13:08

61

光碟操作

重要事项!

– 本机专为普通光碟设计。切勿使用市售的稳定

环或光碟处理片等其它任何附属装置,因为此类装

置可能会卡住光碟的机件。

– 在播放期间不要移动本机,否则可能会损坏本

机。

– DVD 影碟与播放机在设计上均有区域限制。

因此在播放一张影碟之前,必须确定该影碟与你的

播放机具有相同的区码。

– 取决于 DVD 或 VCD 的类型,某些操作可能不

同或受到限制。

– 切勿推压光碟托盘。只可在托盘上装入光碟,

切勿放入其它物品。否则,本光碟播放机可能会产

生故障。

– 当你按下某个按钮时,如果电视机屏幕上出现

禁止图示ø,表示此功能并不适用于此光碟或暂时

不可用。

播放光碟

1

将本 DVD 系统及与之相连的电视机(或任何自选

的立体声音响或 AV 接收器)的电源线连接至电源

插座。

2

开启电视机电源并设置正确的视频输入频道。(见

“设定电视机“)。

3

STANDBY-ON 2键。

➜ 你应该在电视机上看到一个蓝色的飞利浦 DVD

背景画面。

4

按前面板上的LEFT ç 或 RIGHT ç 键(或遥控

器上的L ç 或 R ç键)分别打开左侧或右侧的

光碟门。

➜ 左侧或右侧的光碟门移开时会显示“ OPEN ”

(开)字样。

5

载入一张或多张光碟,光碟有标签的一面朝向你。

再次按前面板上的 LEFT ç 或 RIGHT ç

(或遥控器上的L ç 或 R ç键)关闭左侧或右

侧的光碟门。

➜ CLOSE (关)字样会短暂显示。然后,本

DVD 播放机会从“ DISC 1 ”(光碟1)开始逐一

播放四个光碟托盘中的所有光碟。如果某个光碟托

盘中没有光碟,本机会自动转到下一个光碟托盘。

此时会短暂显示“ CHANGING ”(换碟),然

后接著显示“ LOAD ”(载入)。如果所有的四

个光碟托盘中都没有光碟,会显示“ NO DISC ”

(无光碟)字样。

➜ 如果电视屏幕上出现光碟目录,请参阅“使用

光碟目录”。

➜ 如果光碟被年龄控制功能锁上,你必须输入一

个四位数的密码(见“初期设定页-密码”)。

6

你可随时按 9 键停止播放。

使用光碟选单

对于带有目录表的光碟,当你装入光碟后,电视

画面上可能会出现一个选单。

选择一个播放功能或项目

● 使用 à / á / 5 /

4

及 OK 或遥控器上的数字键( 0

- 9 )进行选择。

➜ 播放将自动开始。

要进入或退出选单

● 按遥控器上的DISC MENU键。

对于带播放控制( PBC )功能的 VCD (仅限 2.

0 版本)

PBC 功能使你可以跟随屏幕上的选单进行互动式

VCD 播放。

● 在播放过程中按 DISC MENU键。

➜ 如果 PBC 在“开”状态,它会切换至“关”并

继续播放。

➜ 如果 PBC 在“关”状态,它会切换至“开”并

返回至目录画面。

基本播放控制

暂停播放( DVD/VCD/CD/MP3/WMA )

1

在播放过程中,按

2; 键。

➜ 播放将暂停,没有声音输出。

2

再按

2;

键恢复播放。

62 pg060-pg083_MCD299-98-Chi-B 62 2007.9.27, 13:08

光碟操作

选择歌曲、章节或标题( DVD/VCD/CD/

MP3/WMA )

1

播放过程中按 í / ë 键跳到上一个 / 下一个章节 / 标

题 / 曲目。

2

若要直接跳到某一个章节 / 标题 / 曲目,可使用数字

键( 0 - 9 )输入章节、曲目或标题号。

从上次停止位置恢复播放( DVD/VCD/CD/

MP3/WMA )

● 在停止模式下,当光碟还未取出时,按

2;键。

要取消恢复模式

● 在停止模式下,再次按 9键。

缩放( DVD/VCD/JPEG )

你可以在播放过程中使用此功能放大或缩小视频图

像。

1

重复按 ZOOM 键放大或缩小所播放的视频图像。

2

按 22

/

33

/

5

/

4

键平移电视画面。

不同的播放模式: SHUFFLE 和 REPEAT

( DVD/VCD/CD/MP3/WMA )

● 在播放过程中,重复按 MODE 键选择一个重复模

式。

在乱序( shuffle )播放模式中 :

● 按 MODE 键以乱序方式选择另一首歌曲。

REPEAT ONE (重复当前歌曲) ➜ REPEAT

ALL (重复整个光碟) ➜ SHUFFLE (乱序) ➜ 

正常播放

在乱序( shuffle )播放模式中 :

● 按

P

键以乱序方式选择另一首歌曲。

● 按 9 键停止乱序播放。

重复 A-B ( DVD/VCD/CD/MP3/WMA )

1

在你所选的播放起点按A-B键。

2

在你所选的播放终点再按A-B键。

➜ 段落的 A 、 B 点只能设在同一章节或曲目中。

➜ 所选段落将不断重复播放。

3

要退出段落播放,再按A-B键。

慢动作播放( DVD/VCD )

1

播放期间按遥控器上的 5 或

4 键选择所需的慢

播速度: 1/2 、 1/4 、 1/8 或 1/16 。

➜ 慢播时将无声音。

2

要回复到常速播放,按

2;键。

编程(图片 CD 无此功能)

你可选择喜爱的曲目 / 章节并按想要的次序播放。

用于 DVD -重复章节 / 标题

● 重复按 MODE 键以选择下列各项 :

REPEAT CHAPTER (重复当前章节) ➜ 

REPEAT TITLE (重复当前标题) ➜ REPEAT ALL

(重复整个光碟) ➜ SHUFFLE (乱序) ➜ 正常

播放

12

用于 SVCD/VCD/CD -重复歌曲 / 光碟

● 重复按 MODE 键以选择下列各项 :

REPEAT TRACK (重复当前歌曲) ➜

REPEAT

ALL (重复整个光碟) ➜

SHUFFLE (乱序) ➜ 

正常播放

用于 MP3 -重复歌曲 / 唱片集 / 光碟

文件夹模式时:

● 重复按 MODE 键以选择下列各项 :

REPEAT ONE (重复当前歌曲) ➜

REPEAT ALL

(重复整个光碟) ➜ SHUFFLE (乱序) ➜ 正常播

1

按 PROGRAM 键进入编程模式。

2

使用数字键( 0 - 9 )直接输入曲目或章节号。

3

按 à / á /

5

/

4

键移动游标选择“播放”。

4

OK 开始播放。

63 pg060-pg083_MCD299-98-Chi-B 63 2007.9.27, 13:08

光碟操作

向前 / 向后搜索( DVD/VCD/CD/MP3/

WMA )

1

在播放过程中,按 22

/

33键选择所需的搜索速度

X2 、 X4 、 X8 或 X32 (向后或向前)。

➜ 搜索时没有声音发出(静音)。

2

要恢复常速播放,按

2;键。

根据时间、章节或歌曲目号搜索( DVD/VCD/

CD/MP3/WMA )

1

GOTO键直到弹出一个时间 / 章节或曲目编辑

框。

2

在时间编辑框中,使用遥控器上的数字键( 0 -

9 )从左至右依次输入小时、分钟和秒的数值。

在章节 / 曲目编辑框中,用遥控器上的数字键( 0 -

9 )输入想要的章节 / 曲目号。

播放过程中的讯息显示( DVD/VCD/CD/

MP3/WMA )

● 在播放过程中,按DISPLAY/OSD键在电视屏幕上

显示光碟的讯息。

光碟特殊功能

播放标题( DVD )

1

DISC MENU键。

➜ 电视画面将显示光碟标题选单。

2

使用 à / á / 5 /

4

键选择一个播放选项。

3

OK确认。

摄影机角度( DVD )

● 重复按 ANGLE/RDS 键选择不同的角度。

更换音频语言(仅限以多种语言录制的 DVD )

● 重复按 AUDIO 键选择不同的音频语言。

更换声道(仅限于 VCD )

● 按AUDIO键选择光碟所提供的声道(左单声道、

右单声道或立体声)。

字幕( DVD )

● 重复按 SUBTITLE 键选择不同的字幕显示语言。

用于 DVD/VCD/SVCD

➜ 出现显示光碟信息的一个选单。

➜ 显示关闭。

用于 CD

➜ 当前曲目的已播放时间。

➜ 当前曲目的剩余播放时间。

➜ 全碟的已播放时间。

➜ 全碟的剩余播放时间。

➜ 显示关闭。

用于 MP3 CD/WMA

➜ 当前曲目的已播放时间。

➜ 当前曲目的剩余播放时间。

➜ 显示关闭。

64 pg060-pg083_MCD299-98-Chi-B 64 2007.9.27, 13:08

光碟操作

重要事项!

– 你必须开启电视机电源并设置正确的视频输入

频道(见“设定电视机”)。

播放

MP3/WMA

光碟

一般操作

1

载入一张 MP3/WMA 光碟。

➜ 电视机屏幕上出现一个数据光碟选单,本机自

动从光碟的第一首曲目开始播放。

2

按 à 键移至电视屏幕左方的曲目集栏,然后使用

5 /

4 键选择一个曲目集并按

OK打开该曲目集。

PHILIPS

播放

JPEG

图片光碟

一般操作

1

载入一张 JPEG 图片光碟。

➜ 电视机屏幕上出现一个数据光碟选单,本机自

动从光碟的第一个文件开始播放。

2

按 à 键移至电视屏幕左方的文件夹栏,然后使

用 5 /

4

键选择一个文件夹并按 OK 打开该文件

夹。

3

按 á 键移至电视屏幕右方的文件栏,然后使用

5 /

4

键加亮一个文件;或者直接使用数字键( 0

- 9 )输入一个文件号。

4

OK确认。

➜ 播放将从所选的图像文件开始直到播完整个文

件夹。

00:00 00:00

001/005

\MP3\Sample\102A\

??

MP3

??

MP3

??

MP3

---

102A-G

102A-L

102A-F

播放选择

在播放过程中,你可以:

● 按 í / ë 键选择当前文件夹中的另一个文件。

● 使用遥控器上的 à / á /

5

/

4

键旋转或翻转该图像

文件。

● 重复按

2;

键暂停或恢复播放。

● 按 9 键停止播放或回复到光碟目录。

3

按 á 键移至电视屏幕右方的曲目栏,然后使用

5

/

4

键加亮一首曲目;或者直接使用数字键( 0 -

9 )输入一个曲目号。

4

OK确认。

➜ 播放将从所选的曲目开始直到播完整个曲目

集。

注意:

由于编辑在一张光碟中的歌曲数量很大,光碟

的读取时间可能会超过 10 秒。

播放选择

在播放过程中,你可以:

● 按 í / ë 键选择当前曲目集中的另一首曲目。

● 重复按

2;

键暂停或恢复播放。 pg060-pg083_MCD299-98-Chi-B 65 2007.9.27, 13:08

65

光碟操作

JPEG

图片光碟特殊功能

缩放图片( JPEG )

● 在播放过程中,重复按 ZOOM 键以不同的比例

( 100% 、 125% 、 150% 、 200% 、 75% 、 50% 和

关闭)显示图片。

● 使用 à / á /

5

/

4

键查看已被缩放的图片。

幻灯片播放模式( JPEG )

● 在播放过程中,重复按 PROGRAM 键选择不同的

幻灯片播放模式:

模式 0 :无( NONE )

模式 1 :由上至下进图( WIPE TOP )

模式 2 :由下至上进图( WIPE BOTTOM )

模式 3 :由左至右进图( WIPE L )

模式 4 :由右至左进图( WIPE R )

模式 5 :由左上至右下进图( DIAGONAL WIPE

L TOP )

模式 6 :由右上至左下进图( DIAGONAL WIPE

R TOP )

模式 7 :由左下至右上进图( DIAGONAL L

BOTTOM )

模式 8 :由右下至左上进图( DIAGONAL R

BOTTOM )

模式 9 :由中间向上下展开图( EXTEND

CENTER H )

模式 10 :由中间向左右展开图( EXTEND

CENTER V )

模式 11 :由上下向中间展开图( COMPRESS

CENTER H )

模式 12 :由左右向中间展开图( COMPRESS

CENTER V )

模式 13 :由上向下分层展开图( WINDOW H )

模式 14 :由左向右分层展开图( WINDOW V )

模式 15 :由四周向中间换图( EDGE TO

CENTER )

模式 16 :由顶切入( MOVE IN FROM TOP )

多角度播放( JPEG )

● 在播放过程中,按 à / á / 5 /

4 键在电视屏幕上旋

转图片。

5

: 垂直翻转图片。

4

: 水平翻转图片。

à : 逆时针方向翻转图片。

á : 顺时针方向翻转图片。

66 pg060-pg083_MCD299-98-Chi-B 66 2007.9.27, 13:08

基本操作

1

SYSTEM MENU 键进入设置选单。

2

按 à/á 键进入设置选单。

3

5/4

键选择需设置的页面。

4

3

OK 键进入其子选单。

5

5/4

键移动游标以高亮显示所选项目。

6

OK 键确认。

要返回上一级选单

按 à 键。

要退出此选单

再按 SYSTEM MENU 键。

即使切断播放器的电源,所做的设定也会保存

在本机的内存中。

注意:

系统菜单选项中的某些功能在“准备”中介

绍。

通用设定页

General Setup Page (通用设定页)中的选项包

括:“ OSD Lang ”(显示语言)和“ Screen

Saver ”(屏幕保护)。

– – General Setup Page – –

OSD Lang

Screen Saver

显示语言

详情见“准备-步骤 4 :设定所需语言”。

系统选单选项

屏幕保护

这项功能用来开启或关闭屏幕保护。

音频设定页

Audio Setup Page (音频设定页)中的选项包

括:“ Night Mode ”(夜间模式)、“ Digital

Output ”(数码输出)和“ Dolby Digital

Setup ”(杜比数码设定)。

– – Audio Setup Page – –

NIGHT MODE

DIGITAL Output

Dolby Digital Setup

夜间模式

开:选择此项可将音量拉平。高音量输出将被

减轻,而低音量输出则被提高至可闻的水平。

关:如果你想享受全动态范围的环绕声,请选

此项。

这项功能只在具有杜比数码( Dolby Digital )模式

的影片中才会生效。

数码输出

Digital 关:关闭数码输出。

Digital/Raw :如果你已将数码输出端子

( DIGITAL OUT )连接到一台多声道解码器 / 接

收机,请选择此项。

SPDIF/PCM :只有当你的接收机不能对多声道

音频解码时才选择此项。 pg060-pg083_MCD299-98-Chi-B 67 2007.9.27, 13:08

67

系统选单选项

杜比数码设定

Dolby Digital Setup (杜比数码设定)页上的选项

包括:“ Dynamic ”(动态范围压缩)。

视频设定页

Video Setup Page (视频设定页)中的选项包括:

“ TV Display ”(电视机形式)、“ Progress ”

(逐行扫描)和“ TV Type ”(电视机制式)。

– – Audio Setup Page – –

NIGHT MODE

DIGITAL Output

Dolby Digital Setup

– – Video Setup Page – –

TV Display

PROGRESS

TV Type

动态范围压缩

优化动态声音输出。此功能可使高音量输出变得柔

和,这样可在您观看喜爱的影片时不至于影响到他

人。

– – Dolby Digital Page – –

Dynamic

动态水平选项包括: FULL 、 3/4 、 1/2 、 1/4 和

OFF 。

注意:

本 DVD 播放机不支持 DTS 环绕音频输出。

电视机形式

详情见“准备-步骤 3 :设定所需视频”。

逐行扫描

详情见“准备-步骤 3 :设定所需视频”。

电视机制式

详情见“准备-步骤 3 :设定所需视频”。

初期设定页

Preference Page (初期设定页)中的选项包括:

“ Audio ”(音频)、“ Subtitle ”(字幕)、

“ Disc Menu ”(碟片选单语言)、“ Parental ”

(年龄控制)、“ Password ”(密码设定)和

“ Default ”(出厂设定)。

– – Preference Page – –

Audio

Subtile

Disc Menu

Parental

Password

Default

音频

详情见“准备-步骤 4 :设定所需语言”。

68 pg060-pg083_MCD299-98-Chi-B 68 2007.9.27, 13:08

字幕

详情见“准备-步骤 4 :设定所需语言”。

碟片选单语言

详情见“准备-步骤 4 :设定所需语言”。

年龄控制

某些 DVD 在整张光碟或某些片断中可能设有限制

等级。此功能可帮助你设置播放限制级别。

等级限制可分为 1 至 8 级,并随国家而有所不同。

你可使用此功能禁播某些不适合儿童观看的光碟或

有选择性地只播放光碟中的某些画面。

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default

1 KID SAF

2 G

3 PG

4 PG 13

5 PGR

6 R

7 NC 17

8 ADULT

系统选单选项

限制级别的解释

1 KID SAFE

– 适合儿童观看。

2 G

– 一般观众,对于所有年龄的人均可接受。

3 PG

– 建议有家长陪同。

4 PG 13

– 题材不适合年龄低于 13 岁的儿童。建议有家长

陪同。

5-6 PG-R, R

– 家长陪同-禁止;建议父母禁止 17 岁以下的儿

童观看或须有家长或监护人陪同时方可观看。

7 NC-17

– 17 岁以下儿童不准观看,或不建议 17 岁以下儿

童观看。

8 ADULT

– 成人题材,影片中含有色情、暴力和粗语,只

限成人观看。

密码设定

你可以输入你的四位数字密码开启或关闭级别控制

功能。

VCD 、 SVCD 和 CD 无分级指示。因此年龄控制功

能在此类光碟中并无任何作用。这对于多数盗版

DVD 光碟也适用。

1

5/4

键高亮显示“ Parental ”(年龄控制)。

2

按 á 键进入其子选单。

3

使用

5/4

键高亮显示所插入光碟的某个分类级

别。

除非你输入对应的四位密码并选择另外一个更

高的分类级别,任何高于此分类级别的 DVD 光碟

都无法在本机上播放。

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default

Change

注意:

虽然某些 DVD 影碟的包装上印有管制类别字

样,但这些影碟没有进行限制编码。所以等级限制

功能并不适用于此类影碟。

要更改密码

1

移到“ Password ”(密码设定)并按 á 或 OK

键进入其子选单。

2

按 OK 键进入以下菜单。 pg060-pg083_MCD299-98-Chi-B 69 2007.9.27, 13:08

69

系统选单选项

PWD

OK

3

使用遥控器上的数字键( 0 - 9 )输入你的四位密

码。

➜ 出厂预设的密码是 1234 。

4

使用数字键( 0 - 9 )输入新的四位密码。

5

在此输入新的密码进行确认。

4

按 OK 确认,新的密码开始生效。

注意:

即使密码已作更改,预设密码( 1234 )也将永

远生效。

出厂设定

“ Default ”(出厂设定)功能将会使所有选项及

个人设定恢复到出厂状态。你所作的所有个人设定

都将被清除。

– – Preference Page – –

Audio

Subtitle

Disc Menu

Parental

Password

Default Reset

1

5/4

键高亮显示“ Default ”(出厂设定)。

2

按 á 键高亮显示“ Reset ”(复原)。

3

OK 确认所作的选择。

小心!

– 此功能启动后,所有设定将恢复到出厂预设

值。

70 pg060-pg083_MCD299-98-Chi-B 70 2007.9.27, 13:08

电台接收

调谐选台

1

重复按主机前面板上的SOURCE键或遥控器上的

TUNER 键选择 TUNER (收音机)模式。

➜ TUNER (收音机)字样短暂显示。

2

再次按主机前面板上的SOURCE 键或遥控器上的

TUNER 键以选择想要的波段: FM 或 MW 。

3

按住 à / á键。

➜ 收音机将自动调谐到一个接收令人满意的电

台。自动调谐时显示屏将显示“ SEARCH ”(搜

索)字样。

4

如果需要,可重复步骤 3 ,直至找到你想要的电

台。

● 要调谐至另一个频率较弱的电台,可重复轻按 à

/ á 键,直至获得最佳的接收。

预设电台

你可在本机的记忆体中存储器中储存多达 40 个电

台。

自动预设电台

自动预设电台会自动从一个自选的序号开始以递增

方式预设电台。任何先前预设的电台都将被取代。

本机将祗会预设尚未储存在记忆体中的电台。

1

按í / ë 键选择开始进行预设的电台序号。

注意:

如果你不选择预设电台序号,本机将从默认的

序号( 1 )开始自动预设电台,而以前编辑的所有

预设电台都将被取代。

2

按 PROGRAM 键超过两秒以启动编辑功能。

➜ AUTO (自动)字样显示,可接收到的电台将以

波段接收的强弱顺序进行编辑:先编辑 FM 电台,

随后是 MW 电台。然后,最后一个自动储存的预设

电台将会播放。 pg060-pg083_MCD299-98-Chi-B 71 2007.9.27, 13:08

71

电台接收

手动预设电台

1

调谐到你想要的电台(见“调谐选台”)。

2

按 PROGRAM 键启动电台编辑功能。

3

按 í / ë 键从 1 至 40 选择一个数字指定为该电台

的编号。

4

再按 PROGRAM 键确认所作的设定。

➜ 显示屏上会显示出预设电台的编号和频率。

5

重复以上四个步骤以储存其它电台。

● 你可在某一预设电台序号的位置储存另一个频率而

更换该预设电台。

选择预设电台

● 按 í / ë 键直至想要的预设电台显示。

改变调谐频阶

(仅限于某些机种)

在南、北美洲, MW 波段相邻频道的频阶为 10 kHz (某些地区为 9 kHz )。出厂时预设的频阶为

10 kHz 。

改变频阶将会抹除以前所储存的所有预设电台。

在收音机模式中,按住机上的 9 键。

➜ 显示屏将显示“ 9 GRID ”或“ 10 GRID ”。

注意:

– GRID 9 和 GRID 10 分别指示调谐频阶为 9 kHz

和 10 kHz 。

72 pg060-pg083_MCD299-98-Chi-B 72 2007.9.27, 13:08

外部音源

使用非

USB

装置

1

将本机的 AUX IN (R/L) 插口连接到另一台音

频 / 视频设备(如 VCR 录影机、激光唱碟机或磁带

座)的 AUDIO OUT 插口。(未随机提供线

缆)

2

按 AUX 键选择外部设备。

"

AUX"

字样显示。

注意:

所有音效控制功能(例如 DSC 或 DBB )都可供选

用。

详情请参阅所连接设备的操作说明书。

使用

USB

大容量储存装置

只要将一台 USB 大容量储存装置连接到 Hi-Fi 系统,

你就可通过 Hi-Fi 系统的强效扬声器享受装置中所

储存的音乐。

播放一台兼容的 USB 大容量储存装置

有了 Hi-Fi 系统,你可以使用:

USB 快闪储存器( USB2.0

或 USB1.1

USB 快闪播放器( USB2.0

或 USB1.1

– 储存卡(需要一台读卡器配合这台 Hi-Fi 系统工

作)。

注意:

在一些 USB 快闪播放器(或储存装置)中,使用

版权保护技术录制的储存内容将无法在诸如这台

Hi-Fi 系统等任何其他设备中播放。

此产品的 USB 连接兼容性: a) 此产品支援大部份符合 USB MSD 标准的 USB 大量

储存装置( MSD )。 i)

大部份常见的大量储存级别装置包括快闪磁碟、

Memory Stick 、 Jump Drive 等等。 ii) 若将大量储存装置插入电脑后可看到“ Disc Drive ”

在书面上出现,则表示多数符合

MSD

并适用于这套产

品。 b) 如果你的大量储存装置需要电池 / 电源,请确保已

装有新电池,或在为 USB 装置充满电后才插入到这套

产品中。

支援的音乐类型: a) 此装置只支援不受保护并有以下副档名的音乐:

.mp3 .wma

b) 由于受到“数码内容管理”( DRM )的保护,从

网上音乐商店购买的音乐将不受支援。 c) 不支援有以下副档名的档案:

.wav

、 .aac

等等

即使电脑中有 mp3 或 wma 档案,亦不可透过电

脑的 USB 连接埠与产品进行直接连接。

本机支持的格式:

USB 或内存文件格式 FAT12 、 FAT16 、 FAT32

(节段大小: 512 字节)

MP3 比特率(数据率): 32 - 320Kbps 和可变

比特率

– WMAv9 或之前的版本

– 嵌入目录最多为 8 层

– 最大的曲目集 / 文件夹数目为 99

– 最大的曲目 / 文件数目为 999

– 使用统一码 UTF8 的文件名(最大长度: 128 字

节)

本机将不播放或不支持下列格式:

– 空曲目集:空曲目集指不含 MP3/WMA 文件的

曲目集,这种曲目集不会在显示屏上显示。

– 不受支持的文件格式会被跳过。这就是说,例

如: Word 文件 .doc

或具有延伸名 .dlf

的 MP3 文

件将不会被播放。

– AAC 、 WAV 、 PCM 音频文件

– 受 DRM 保护的 WMA 文件

– 可变比特率格式的 WMA 文件

如何将音乐文件从 PC 传送到 USB 大容量储存装

通过拖放音乐文件方法,你便可轻易地把你喜爱的

音乐从 PC 传送到 USB 大容量储存装置中。

对于快闪播放器,你可使用其音乐管理软件进行音

乐传送。

然而,这些 WMA 文件可能因为兼容性的问题而

无法播放。

73 pg060-pg083_MCD299-98-Chi-B 73 2007.9.27, 13:08

外部音源

如何组织在你的 USB 大容量储存装置上的 MP3/

WMA 文件

Hi-Fi 系统将按文件夹 / 子文件夹 / 标题次序浏览

MP3/WMA 文件。

例如:

Root

Title 001

Title 002

Title 003

Album 01

Title 001

Title 002

Title 003

Album 02

Title 001

Title 002

Title 003

Album 03

Title 001

Title 002

Title 003

你可按需要组织在不同文件夹或子文件夹中的

MP3/WMA 文件。

注意:

如果你没有将 MP3/WMA 文件编排进你光碟上

任何曲目集中,本机将会自动为所有这些文件指

定一个曲目集“ 00 ”。确定 MP3 文件名以 .mp3

尾; WMA 文件名以 .wma

结尾。

对于受 DRM 保护的 WMA 文件,请使用

Windows Media Player10 (或更新版本)进行转

换。关于 Windows Media Player 和 WM DRM

( Windows 媒体数码版权管理)的详情,请浏览

网站: www.microsoft.com

1

检查 USB 装置已正确连接 . ( 见安装:连接其它设

备 ).

2

按 SOURCE (或遥控器上的 USB )键一次或多

次以选择 USB 。

– 如果在 USB 装置中找不到音频文件, NO

AUDIO (无音频)字样出现。

3

如同你在 CD 光碟上播放曲目集

作)一样播放 USB 的音频文件。

/ 曲目(见光碟操

注意:

由于兼容性的原因,所显示的曲目集 / 曲目资料

可能与使用快闪播放器的音乐管理软件所显示的

不同。

74 pg060-pg083_MCD299-98-Chi-B 74 2007.9.27, 13:08

计时器

计时器设定

本机能够在预定的时间自动播放光碟、 USB 或收音

机,作为闹钟把你唤醒。

重要事项!

– 在设定计时器之前,应先确保时钟已经正确设

定。详情见“准备-步骤 2 :设定时钟”。

– 只有在待机模式下才可以启用定时器功能。

1

按住 TIMER/SLEEP 键选择计时器模式。

上一次的计时器设定开始闪动。

所选的声源将亮起。

2

按 SOURCE (或遥控器上的 DISC, USB

TUNER 键)选择所需声源。

你也可以按 DISC 1/2/3/4 键选择播放哪一个光

碟。

设定计时器之前,必须确定所选声源已准备就绪。

DISC (光碟)– 装入光碟。如要从某首曲目开始

播放,请编辑一个曲目播放清单(参阅“光碟操作

-编程”一节)。

USB – 正确插入一台 USB 大容量储存装置。

TUNER (收音机)– 调谐至想要的电台。

3

重复按 à á

4

重复按 í / ë 键以设定计时器开始的分钟数。

5

按遥控器上的 TIMER/SLEEP 键储存所设定的计

时器开始时间。

当预定时间到达时,所选声源将会自动播放。

要退出而不储存所作的设定

按主机上的 Ç 键。

注意:

当计时器的预定时间到达时,如果所选的光碟

托盘是空的,本机将会选择下一片可得到的光碟。

如果所有光碟托盘中都没有光碟,本机将自动选择

收音机为声源来播放。

在计时器设定期间,如果 90 秒内没有任何键按

下,本机将自动退出时钟设定模式。

关闭计时器

按遥控器上的 TIMER/SLEEP 键。

标志将从显示屏中消失。

再度开启计时器

按遥控器上的 TIMER/SLEEP 键。

标志将出现在显示屏上。 pg060-pg083_MCD299-98-Chi-B 75 2007.9.27, 13:08

75

计时器

关机计时器设定

关机计时器能使本机在一个预设的时间长度后自动

切换到待机模式。

1

重复按遥控器上的 TIMER/SLEEP 键以选择预设

时间。

可供选择的预设时间长度(单位为分钟)如

下:

15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™

15 …

2

当到达你想要的预设时间长度时,停止按 TIMER/

SLEEP 键。

标志显示(“ OFF ”模式除外)。

关机计时器即已被设定。

关机计时器开启后检查其剩余的时间长度

TIMER/SLEEP 键一次。

改变关机计时器的预设时间

当关机计时器的剩余时间显示时,再按 TIMER/

SLEEP 键。

显示屏将显示下一个关机计时器时间选项。

关闭关机计时器

重复按 TIMER/SLEEP 键直至“ OFF ”(关闭)

字样显示,或者按 STANDBY-ON B 亦可。

注意:

关机计时器开启后,当其剩余的时间长度不足

一分钟时, 标志将开始闪动。

76 pg060-pg083_MCD299-98-Chi-B 76 2007.9.27, 13:08

放大器

输出功率 ......................................................................

140 瓦 RMS

讯噪比 .............................................................................. ≥ 60 dBA

频率响应 .....................................

150 – 20000 赫,± 3 分贝

AUX 输入灵敏度 ..................................

0.5

伏(最大 2 伏)

扬声器阻抗 .............................................................................

6 欧姆

耳机阻抗 ..............................................................

32 Ω -1000 Ω

DVD 播放机

激光器类型 .......................................................................... 半导体

光碟直径 ...............................................................

12 厘米 /8 厘米

视频解码 .

................................................

MPEG-2 / MPEG-1

视频数-模转换器( DAC ) ................................

10 比特

讯号系统 .................................................................

PAL / NTSC

视频格式 .........................................................................

4:3 / 16:9

视频讯噪比 ..............................................

56 dB (minimum)

复合视频输出 ...............................

.1.0

伏峰-峰, 75 欧姆

声频数-模转换器( DAC ) ............

24 比特 /96 千赫

频率响应 ...............................

4 赫- 20 千赫( 44.1

千赫)

........................................................

4 赫- 22 千赫( 48 千赫)

..........................................................

4 赫- 44 千赫( 96 千赫)

数码输出 ......

SPDIF ( Sony Philips 数码界面)同轴

可编辑曲目数 ................................................................................

20

讯噪比 .............................................................................. ≥ 60 dBA

声道分隔 ................................................. ≥ 40 分贝( 1 千赫)

总谐波失真 .................................................

< 0.1% (1 千赫)

USB 播放机

USB .......................................................................

12Mb/ 秒 , V1.1

.......................................................... 支援 MP3 和 WMA 文件

曲目集 / 文件夹数目 ....................................................... 最多 99

曲目 / 文件数目 ............................................................... 最多 999

技术规格

收音机

FM 波段范围 ...............................................

87.5 – 108 兆赫

灵敏度(在 75 欧姆)

– 单声 , 26 分贝讯噪比 ..........................................

2.8

微伏

– 立体声 , 46 分贝讯噪比 ...................................

61.4

微伏

调谐频阶 ..........................................................................

9/10 千赫

选择性 ................................................................................ ≥ 15 分贝

总谐波失真 ............................................................................... ≤ 5%

频率响应 ......................................

40 – 5000 赫( -6 分贝)

讯噪比 .............................................................................. ≥ 58 dBA

扬声器

前置扬声器

阻抗 ............................................................................................

6 欧姆

灵敏度 ............................................................................

80 ± 4 分贝

频率响 ..............................................................

150 赫- 20 千赫

外形尺寸 177 (宽) x 297 (高) x 89 (深)毫米

重量 ........................................................................ 每个 1.265

公斤

重低音扬声器

重低音扬声器(非磁屏蔽设计) ...............................

8 ”

阻抗 ..............................................................................................

8 欧姆

输出功率 ...................................................................................

80 瓦

外形尺寸(宽 x 高 x 深) .......................................................

............................................

220 毫米 x 350 毫米

重量 ....................................................................................

x 357

9.66

毫米

公斤

一般资料

交流电源 ....................................

110 - 127/220 - 240 伏 ;

............................................................................

50/60 赫,可切换

外形尺寸(宽 x 高 x 深) 450 x 335 x 115 (毫米)

重量(含 / 不含扬声器) ..........................

5.63 / 3.1

公斤

待机功耗 .................................................................................... ≤ 4 瓦

规格及外观如有更改,恕不另行通知。 pg060-pg083_MCD299-98-Chi-B 77 2007.9.27, 13:08

77

故障排除

警告

无论任何情况你都不应自己动手修理本机,因为这将会令你无法获得保修服务。切勿打开机件,慎防触电。

如果本机出现故障,在送去修理之前请先检查下表所列各项。如果这些方法仍未能解决问题,请向你的经销

商或飞利浦求助。

问题

没有电源。

“ NO DISC ”(无光碟)字样显示。

没有画面。

解决方法

✔ 请检查交流电源线是否正确连接。

检查光碟是否颠倒放置。

静待激光头上的水汽蒸发至激光头完全清晰

为止。

更换或清洁该光碟,请参阅“维护保养”一

节。

使用一张可读取的光碟或刻录格式正确的

MP3-CD

光碟。

在电视机上选择正确的视频输入模式。

请检查电视是否开启。

检查视频连接。

检查本机是否连接紧固。。

如果逐行扫描功能被激活但相连接的电视机

却不支持逐行扫描信号或电缆未正确连接,

请参阅“准备-设定逐行扫描功能”进行正

确的逐行扫描设定。

画面扭曲或画质欠佳。

即使你设定了电视机的形状,屏幕的长宽比还是无

法改变。

✔ 有时画面会出现小部分扭曲的情况,并非设备故

障。

✔ 清洁光碟。

DVD

影碟的宽高比是固定不变的。

一些电视机的宽高比是不能改变的。

78 pg060-pg083_MCD299-98-Chi-B 78 2007.9.27, 13:08

故障排除

问题

DVD 播放机不能开始播放。

按下按键时本微型 DVD 系统无反应。

播放 DVD 影碟时无法改变声音或字幕所用的的

语言。

当选择一项功能时没有影像输出。

没有声音或音质差。

收音效果差。

解决方法

插入一张可读光碟。

检查光碟类型、颜色系统以及地区编码。

清洁光碟。

插入一张光碟,需播放的一面朝内。

按SYSTEM MENU键关闭菜单设定画面。

取消年龄控制功能或更改控制级别。

系统内有蒸汽凝结。取出光碟并保持开机大

1

小时。

✔ 断开系统电源然后重新插上。

所播放

DVD

内未录制多语言声音或字幕。

所播放

DVD

禁止更改音频语言或字幕。

确定连接正确。

按正确的输入音源功能键。

调整音量。

检查扬声器的连接是否正确。

确定扬声器接线裸露部分已被夹紧。

如果系统正处于暂停、慢放或快进

/

快倒模

式,按

2;

键恢复正常播放模式。

确定

MP3-CD

光碟录制的比特率为

32

256 kbps

,取样率为

48 kHz

4.1 kHz

32 kHz

确定

DTS

光碟也支持杜比数码输出。

如果天线讯号太微弱,可调整天线或连接户

外天线以取得最佳接收效果。

增加本机与电视机或

VCR

录影机之间的距

离。 pg060-pg083_MCD299-98-Chi-B 79 2007.9.27, 13:08

79

故障排除

左右声频输出颠倒。

遥控器不能正常工作。

问题

计时器不工作。

时钟 / 计时器设定被删除。

USB 装置上的一些文件不能播放。

解决方法

✔ 检查扬声器的连接及位置。

将遥控器对准主机前面的红外线传感应器操

作。

缩短遥控器至本机的距离。

移开任何障碍物。

换入新电池。

检查电池是否放置正确。

✔ 正确设定时钟。

✔ 如果电源中断或电源插头被拔出,应重新设

定时钟

/

计时器。

✔ 检查文件夹数目是否超过

99

个或文件夹数目

是否超过

999

个。

80 pg060-pg083_MCD299-98-Chi-B 80 2007.9.27, 13:08

模拟( Analog ):没有被转变成数码的声音。

模拟声音会变化,而数码声音具有特定的数值。

模拟插孔通过左边和右边两个声道传送音频。

宽高比( Aspect ratio ):显示图像的水平与

垂直尺寸之比值。传统电视机的水平与垂直尺寸

比是 4:3 ,而宽屏幕电视机的是 16:9 。

音频输出( AUDIO OUT )插孔:位于 DVD

系统背面,用来把音频讯号传送到另一个系统

(电视机,音响等)的插孔。

比特率( Bit Rate ):用来保持一段给定长度音

乐的数据量或者你录音的速度;以每秒千比特或 kbps 为量度单位。通常,比特率越高,音质越佳。

然而,较高的比特率需要使用较大的光碟空间。

章( Chapter ): DVD 影碟上的一幅图片或一

段音乐区段,章比标题小。标题由若干个章组

成。每一章都指定有一个章号,使你能找出你想

要的章。

色差视频输出( Component Video Out )

插孔:位于 DVD 系统背面,用来把高质量的视

频讯号传送到一台具有色差视频输入插孔( R/G/

B 、 Y/Pb/Pr 等)的电视机。

光碟菜单( Disc menu ):一个萤幕显示,准

备用来选择记录在一张 DVD 影碟上的影像、声

音、字幕和多摄影角度等项目。

数码( Digital ):已被转换为数码值的声音。

当你使用同轴( COAXIAL )数码音频输出

( DIGITAL AUDIO OUT )插孔时,便可获得

数码声音。这些插孔通过多个声道而不是像模拟

声音那样只用两个声道来传送音频。

杜比数码( Dolby Digital ):一个由杜比数码

实验室( Dolby Laboratories )开发的环绕声系

统,包含多达六个数码音频声道(左前置和右前

置、左环绕和右环绕以及中央和重低音声道)。

DTS :数码影院系统。这是一个不同于杜比数码

( Dolby Digital )的环绕声系统,其格式由不同

的公司所开发。

JPEG :由联合图像专家组( Joint Photographic

Expert Group )所倡导的一个静态图像数据压缩

系统,其特点是压缩比高,但图像质素只是轻微

降低。

MP3 :一个具有声音数据压缩的文件格式,

“ MPE1 ”是活动图像专家组 1 ( Motion Picture

Experts Group 1 )的缩写。通过 MP3 格式,一

张 CD-R 或 CD-RW 光碟能够容纳大约十倍于普通

CD 光碟所能容纳的数据量。 pg060-pg083_MCD299-98-Chi-B 81

术语集

多声道( Multichannel ):按照规定, DVD 光

碟必须具有构成一个音场的全部声轨。多声道是

指一个具有三声道或以上的声轨结构。

家长控制( Parental control ): DVD 影碟的

一项播放限制功能,根据每个国家制定的限制等

级,按使用者年龄来限制影碟的播放。限制等级

随碟片的不同而异。当此项功能启用时,凡是等

级高于使用者所设定等级的影碟,一律被禁止播

放。

PCM (脉冲编码调制):一个不经数据压缩而把

模拟声音频号转换为数码声音频号以供下一步处

理的系统。

播放控制( Playback control , PBC ):指录

制在 VCD 或 SVCD 影碟上用作重放控制的讯号。

通过使用录制在可支持 PBC 的 VCD 或 SVCD 影碟

上的萤幕选单,你能够享受互动式软件的乐趣,

而且还具有搜索功能。

逐行扫描( Progressive Scan ):逐行扫描一

次过显示一帧照片的所有水平线,如同一个讯号

帧一样。这个系统能从 DVD 中把隔行扫描视频

转换成逐行扫描格式,以连接到一台逐行扫描显

示屏中。逐行扫描大大增加了影像的垂直分辨

率。为了接收来自该播放机的逐行扫描输出,需

要一台逐行扫描电视机。

区码( Region code ):一个只容许碟片在预定

地区播放的系统。本机只播放兼容区码的碟片。

区码可在机上的产品标签中找到。一些碟片能与

超过一个区码兼容(或称之为全区码碟片)。

S-Video ( S视频):通过分开传送亮度讯号和

色彩讯号而产生一幅清楚的图片。只有当你的电

视机具有 S-Video In ( S视频输入)端子时,才能

使用 S-Video 。

取样频率( Sampling Frequency ):当把模

拟数据转换为数码数据时的数据取样频率。取样

频率以数码方式表示出原来的模拟讯号每秒被取

样的次数。

环绕( Surround ):一个环绕声系统,通过在

聆听者周围安置多个扬声器,使用者可在该系统

中建立逼真而充满现场感的三维空间声场。

标题( Title ):录制在 DVD 视频软件中的图像

或音乐功能中最长的区段,或在音频软件中的整

个曲目集。每个标题都指定有一个编号,使你能

找出想要的标题。

视频输出( VIDEO OUT )插孔:位于 DVD 系

统背面,用来把视频讯号传送到电视机的插孔。

81

2007.9.27, 13:08

附录

如何把本机安装在墙上

重要事项!

– 墙上安装说明专供合格的墙上安装人员使用!

– 请一位合格的人员帮助您进行墙上安装工作,

包括在墙上钻孔以及把本机安装在墙上。

随附的装墙套件内有何物件?

将主机安装到墙上

1

将模板对准在墙上预先选择好的位置,并使用铅

笔在钻孔位置做标记(如图所示)。

164 mm

一块模板 2

按所做的标记钻两个直径 6mm 的小孔。

3

分别将入墙销钉和螺丝固定在孔内,螺丝须露出

墙外 5mm 。

164 mm

六支螺丝和销钉

两块扬声器托架

您还需要甚么

– 钻孔工具(例如电钻)

准备工作

1

找出一个适合的安装位置,并完成必需的背面连

接(见“准备”)。

2

请一位合格的人员帮助您进行墙上安装工作,这

位人员应该:

– 清楚了解关于墙内的管道、配线和其它有关资

料,以免发生意想不到的危险;

– 根据钻墙要求,选择适合的钻墙工具;

– 采取其它必要措施进行墙上安装工作。

4

如要卸下支座, a. 如图所示,按住PRESS 4。 b. 从机上拉出支座。

1

5

将主机悬挂在紧固的螺丝上。

82 pg060-pg083_MCD299-98-Chi-B 82 2007.9.27, 13:08

附录

将扬声器安装到墙上

使用随机附送的扬声器支架,你也可以将扬声器

安装到墙上。

1

将扬声器支架分别安放在墙上准备悬挂扬声器的

位置。为每个支架在墙上钻两个尺寸稍小一些的

孔,以确保牢固安装。

2

使用两个销钉和螺丝(随机附送)分别将上述支

架固定到墙上。

3

以卸下主机支座同样的方式卸下扬声器支座。

4

将扬声器稳固地悬挂在支架上。 pg060-pg083_MCD299-98-Chi-B 83 2007.9.27, 13:08

83

Meet Philips at the Internet http://www.philips.com

MCD299

CLASS 1

LASER PRODUCT

PageBack_MCD299_98 94

Printed in China

2007.9.27, 13:03

PDCC-JS-JW-0740

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • DVD player
  • 140 W 2.1 channels
  • Dolby Digital, DTS
  • Progressive scan
  • Equalizer
  • FM radio

Related manuals