Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
MICRO COMPONENT SYSTEM
XL-MP2H Micro Component System consisting of XL-MP2H (main unit)
and CP-MP2H (speaker system).
MODEL
XL-MP2H
OPERATION MANUAL
04/12/15
XL-MP2H_FRONT.fm
XL-MP2H
Special notes
WARNINGS
General Information
When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the ON/
STAND-BY button is set at STAND-BY position, the unit may be
brought into operation by the timer mode or remote control.
This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service operation and when not in use for a long period.
To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or broadcasting such material without permission of the relevant licensees or
owners of the copyright is prohibited by law. SHARP is not in a position to authorise the copying or broadcasting of copyright materials
and nothing in this OPERATION MANUAL should be implied as giving that authority.
CAUTION
This product is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
As the laser beam used in this compact disc player is harmful to
the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
Laser Diode Properties
Material: GaAIAs
Wavelength: 790 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
For other countries:
Audio-visual material may consist of copyrighted works which must
not be recorded without the authority of the owner of the copyright.
Please refer to the relevant laws in your country.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS.
WARNUNG-UNSICHTBARE LASERSTRAHLUNG WENN GERÄT
GEÖFFNET. NICHT IN DIE STRAHLUNG SCHAUEN ODER
DIREKT MIT OPTISCHEN HILFSMITTELN BETRACHTEN.
ATTENTION-RAYON LASER INVISIBLE EN CAS D'OUVERTURE.
NE PAS REGARDER LE FAISCEAU DIRECTEMENT OU AVEC DES
INSTRUMENTS OPTIQUES.
2
Contents
Supply of this product does not convey a license nor imply any right
to distribute content created with this product in revenue-generating
broadcast systems (terrestrial, satellite, cable and/or other
distribution channels), revenue-generating streaming applications
(via Internet, intranets and/or other networks), other revenuegenerating content distribution systems (pay-audio or audio-ondemand applications and the like) or on revenue-generating physical
media (compact discs, digital versatile discs, semiconductor chips,
hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
XL-MP2H
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 7
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 - 9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CD or MP3/WMA disc Playback
Accessories
Please confirm that the following accessories are included.
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . . . .13 - 14
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . .15 - 18
MP3/WMA folder mode (only for MP3/WMA files) . . . . . . .19 - 20
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Listening to the memorised station . . . . . . . . . . . . . . . . . . . . . 22
Tape Playback
Listening to a cassette tape . . . . . . . . . . . . . . . . . . . . . . . .22 - 23
Remote control 1
"AAA" size battery (UM-4,
R03, HP-16 or similar) 2
Tape Recording
Recording on a cassette tape . . . . . . . . . . . . . . . . . . . . . . .24 - 25
General Information
Special Note
Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . .26 - 28
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
References
AM loop aerial 1
Note:
Only the above accessories are included.
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 - 30
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3
XL-MP2H
Precautions
General
Please ensure that the equipment is positioned in a well ventilated
area and that there is at least 10 cm (4") of free space along the
sides and back. There must also be a minimum of 10 cm (4") of
free space on the top of the unit.
General Information
10 cm (4") 10 cm (4")
4
10 cm (4")
10 cm (4")
Use the unit on a firm, level surface free from vibration.
Keep the unit away from direct sunlight, strong magnetic fields,
excessive dust, humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which generate electrical
noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it from the
wall socket, as pulling the lead can damage internal wires.
The AC power plug is used as disconnect device and shall always
remain readily operable.
Do not remove the outer cover, as this may result in electric
shock. Refer internal service to your local SHARP service facility.
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Attention should be drawn to the environmental aspects of battery
disposal.
The apparatus is designed for use in moderate climate.
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
Warnings:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other
than that which is specified.
CD players use a laser pickup which can damage the eyes if
viewed directly. Do not look at the pickup, and do not touch
the pickup directly.
Volume control
The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collection and player.
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
YES
Correct
Controls and indicators
XL-MP2H
1
10
2
3
4
11
12
13
14
15
16
5
6
7
8
9
17
18
19
20
21 22
23
24
Reference page
1. CD Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2. On/Stand-By Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 26
6. Memory/Disp Button . . . . . . . . . . . . . . . . . . . . . . . . 17, 21, 26
7. Tuning Up/Folder Up Button . . . . . . . . . . . . . . . . . . . . . . . . 21
8. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
9. Tuning Down/Folder Down Button . . . . . . . . . . . . . . . . . . . 21
10. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
11. CD Play/Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
12. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
13. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
14. Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
15. Disc Track Up or Fast Forward, Tuner Preset Up,
Time Up Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 17, 21, 26
16. Equaliser Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
17. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
18. Disc Track Down or Fast Reverse, Tuner Preset Down,
Time Down Button . . . . . . . . . . . . . . . . . . . . . . . 12, 17, 21, 26
19. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
20. Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
21. Tape Record Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
22. Tape Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
23. Tape Rewind Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
24. Tape Fast Forward Button . . . . . . . . . . . . . . . . . . . . . . . . . 23
25. Tape Stop/Eject Button . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
26. Tape Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
General Information
Front panel
25 26
5
XL-MP2H
Controls and indicators (continued)
1
2
3
Display
4
MEMORY FOLDER 1
RANDOM
TRACK WMA MP3 CD
11
General Information
kHz
MHz
SLEEP ROCK CLASSIC POPS JAZZ X BASS ST
12
13
TRACK WMA
5
MP3
6
7
14
15 16
CD
8 9 10
3
Reference page
1. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Disc Repeat Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4. Random Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5. MP3/WMA Track Indicator . . . . . . . . . . . . . . . . . . . . . . . 14, 15
6. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. MP3 Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
12. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
13. Equaliser (ROCK, CLASSIC, POPS, JAZZ) Indicator . . . . 11
14. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
15. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 21
16. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 21
Rear panel
Reference page
1. AM Loop Aerial Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. FM Aerial Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4. Beat Cancel Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5. Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6. AC Input Socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1
2
4
5
6
Speaker system
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
1
3
2
4
6
XL-MP2H
9
2
3
4
5
6
7
10
11
12
13
14
15
8
16
17
18
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 10
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. CD Play/Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. Disc Track Up or Fast Forward, Tuner Preset Up,
Time Up Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 17, 21, 26
5. Disc Track Down or Fast Reverse, Tuner Preset Down,
Time Down Button . . . . . . . . . . . . . . . . . . . . . . . 12, 17, 21, 26
6. Tuning Down/Folder Down Button . . . . . . . . . . . . . . . . . . . 21
7. Tuning Up/Folder Up Button . . . . . . . . . . . . . . . . . . . . . . . . 21
8. Disc Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . 13, 15
9. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
10. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 26
11. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
12. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
13. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
14. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
15. Memory/Disp Button . . . . . . . . . . . . . . . . . . . . . . . . 17, 21, 26
16. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 11
17. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
18. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
19. Equaliser Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
General Information
Remote control
1
19
7
XL-MP2H
System connections
Make sure to unplug the AC power lead before any connections.
Aerial connection (see page 9)
AM loop aerial
FM aerial
Preparation for Use
Right speaker
ANTENNA
GND AM
FM
75 OHMS
Speaker connection
(see page 9)
8
Left speaker
Wall socket
(AC 220 - 240V, 50/60 Hz)
AC power connection (see page 9)
XL-MP2H
„ Aerial connection
„ Speaker connection
Attached FM aerial:
Position the FM aerial wire in the direction where the strongest signal
can be received.
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM loop aerial socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Black
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
„ AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
Preparation for Use
Red
Caution:
z Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
z Do not mistake the right and the left
channels. The right speaker is the one on the
right side when you face the unit.
z Do not let the bare speaker wires touch
each other.
z Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
z Do not stand or sit on the speakers. You may
Incorrect
be injured.
< Attaching to the wall >
Wall socket
(AC 220 - 240V, 50/60 Hz)
Wall
Screws (not supplied)
Note:
z Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
9
XL-MP2H
Remote control
Battery installation
1
2
Preparation for Use
3
Open the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Close the cover.
Test of the remote control
After installing the unit (see pages 8 - 9), check that the remote
control operates correctly.
Point the remote control directly at the remote sensor on the unit.
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Battery removal:
Open the battery cover and pull up the battery to take out.
10
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AAA" size batteries (UM4, R03, HP-16 or similar).
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
vibrations.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can use the unit.
General control
XL-MP2H
Volume control
VOLUME
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
MIN
01 ... 30 MAX
FLAT (Display off)
ROCK
CLASSIC
To turn the power on
Press the ON/STAND-BY button to turn the power on.
POPS
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Auto power off function
In the stop mode of CD operation, the main unit enters the stand-by
mode after 10 minutes of inactivity.
Volume auto set-in
If you turn off and on the main unit with volume set to 16 or
higher, the volume will start at 16.
If you turn the unit off then on again with the volume level set to
less than 15, it will turn on again at the level set.
Basic Operation
Equaliser
When the EQUALIZER button on the main unit or remote control is
pressed, the current mode setting will be displayed. To change to a
different mode, press the EQUALIZER button repeatedly until the
desired sound mode appears.
JAZZ
X-BASS
When the X-BASS button on the remote control or main unit is
pressed, the unit will enter the extra bass mode which emphasises
the bass frequencies and "X-BASS" will appear. To cancel the extra
bass mode, press the X-BASS button again.
11
XL-MP2H
Setting the clock
To confirm the time display:
Press the CLOCK/TIMER button.The time display will appear for
about 5 seconds.
Basic Operation
Notes:
To reset the clock if the power fails or is unplugged, the unit must
be in the STAND-BY mode.
"0:00" or time will flash when the AC power supply is restored after
a power failure or unplugging the unit or when reset button is
pressed.
Readjust the clock as follows:
12
To readjust the clock:
Perform "Setting the clock" from beginning.
PRESET
In this example, the clock is set for the 24-hour (0:00) display.
1
2
3
In STAND-BY condition.
4
5
Press the CLOCK/TIMER button again.
6
Press the CLOCK/TIMER button again.
Press the CLOCK/TIMER button for more than 2 seconds.
Within 10 seconds, press the PRESET (
set hour.
Within 10 seconds, press the PRESET (
set minute.
or
) button to
or
) button to
Listening to a CD or MP3/WMA disc
XL-MP2H
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
The MP3 track indicator will light up when an MP3 track is read.
This system supports MPEG 1 Layer 3 and VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are ASF (Advanced System Format) audio files which
are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media
Player.
The WMA track indicator will light up when a WMA track is read.
Supported bit rates for WMA files range from 64 kbps to 160 kbps.
CD or MP3/WMA disc Playback
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the equipment used for recording.
13
XL-MP2H
Listening to a CD or MP3/WMA disc (continued)
1
2
3
Open the CD compartment.
To interrupt playback:
Press the CD
/
button during playback.
Press the CD
/
button again to resume playback.
Place the disc on the spindle, label side up. 8 cm (3") discs
may be played without an adaptor.
To listen to the track being played again:
During playback, press the
button.
Press the ON/STAND-BY button to turn the power on.
CD or MP3/WMA disc Playback
12 cm (5")
8 cm (3")
or
To skip a number of tracks at one time:
Press the
or
button repeatedly until the desired track
number is shown.
4
Close the CD compartment.
WMA indicator
MP3 indicator
(MP3/WMA)
(CD)
FOLDER
TRACK
CD
WMA
Total number
Total playing
of tracks on the time of the
disc
disc
MP3
Total number
of folders on
the disc
Total number of
files (track) on the
disc
Due to the structure of its disc information, it takes longer
(approximately 20 to 90 seconds) to read a CD-R/RW disc
recorded in the MP3 or WMA format than a normal CD.
5
Press the CD
/
button to start playback from track 1.
Disc play indicator
(MP3/WMA)
Disc play indicator
(CD)
TRACK
CD
TRACK
MP3
When the last track on the disc has finished playing, the unit will
stop automatically.
14
To move to the beginning of the next track:
During playback, press the
button.
To start playback a desired track:
Press the
or
button whilst in the stop mode to select
the track number and then press the CD
/
button.
To fast forward:
During playback, press and hold down the
the button to resume playback.
button. Release
To fast reverse:
During playback, press and hold down the
the button to resume playback.
button. Release
To stop playback:
Press the button.
Caution:
Do not play discs with special shapes (heart or octagon shaped)
as it may cause malfunctions.
If a disc is damaged, dirty, or loaded upside down, "NO DISC" will
appear on the display.
Keep foreign objects out of the disc compartment.
Subjecting the unit to shock or vibration may cause mistracking.
When the unit is not being used, be sure to close the disc compartment. If it is left open, the lens may be covered with dust and
the unit may not operate properly.
If TV or radio interference occurs during disc operation, move the
unit away from the source of the interference.
Advanced CD or MP3/WMA disc playback
Use the direct search buttons
on the remote control to select
the desired track whilst playing
or in the stop mode.
TRACK
CD
Selected track number
The direct search buttons allow you to select up to number 9.
When selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button
once.
2 Press the "1" button.
3 Press the "3" button.
B. For example, to choose 130
1 Press the "+10" button twice.
2 Press the "1" button.
3 Press the "3" button.
4 Press the "0" button.
Whilst in the stop mode:
Press the direct search button to select desired track and the
selected track will be played back.
Notes:
A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.
For CD-R/RW discs recorded in the MP3 or WMA format, you can
select the track number but cannot select the folder by pressing
the direct search buttons.
To stop playback:
Press the button.
CD or MP3/WMA disc Playback
Direct track search
By using the direct search buttons, the desired tracks on the current
disc can be played.
XL-MP2H
Whilst playing the disc:
The desired track can be selected by simply pressing the direct
search button and the selected track will be played back.
15
XL-MP2H
Advanced CD or MP3/WMA disc playback (continued)
Repeat play (REMOTE CONTROL ONLY)
Repeat play can play single track and all track sequence continuously.
RANDOM
1
FOLDER 1
WMA
MP3
CD or MP3/WMA disc Playback
REPEAT
Each time press the button, the repeat mode changes in the following
order:
In case of an audio CD mode:
Repeat playback of a single track
1
Repeat playback of all tracks on the disc
Repeat playback of folder on the disc when in folder mode
Folder
Repeat playback is cancelled
Random play (REMOTE CONTROL ONLY)
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks:
Press the RANDOM button on the remote control so that the random indicator light up in the display window.
RANDOM
FOLDER
RANDOM
MP3
16
To cancel random playback, press the button again, so that the random indicator will disappear.
Notes:
If you press the
or
button during random play, you
can move to the track selected next by the random operation.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
During random play, repeat function is not possible.
In random function, playback will stop after all the tracks is played
randomly.
Caution:
After performing repeat, be sure to press the
Otherwise, it will play continuously.
button.
Note:
( ) When in folder mode, the selected playmode can be used for the
files in the selected folder only.
Notes:
This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3", "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
Copyright protected WMA files cannot be played back.
XL-MP2H
1
Whilst in the stop mode, press the MEMORY/DISP button
to enter the programming save mode.
MEMORY
TRACK
2
CD
Press the direct search buttons on the remote control to
select the desired tracks.
MEMORY
TRACK
To cancel the programmed play mode:
During programmed stop mode, press the MEMORY/DISP button
and press the button or STOP button on the remote control. The
display will show "CLEAR" and all the programmed contents will be
cleared.
Notes:
If the disc lid is opened, the programmed sequence will be
cancelled.
The programme will automatically cancelled if you press the ON/
STAND-BY button to enter the stand-by mode or change the
function from CD to another.
During the programme operation, press the RANDOM button will
automatically cancelled the programme.
CD
CD
STOP
PRESET
You can also select a track by pressing the
button.
3
or
Press the MEMORY/DISP button to save the track number.
MEMORY
TRACK
1
2
3
4
5
6
7
8
9
0
CD
+10
4
Repeat steps 2 – 3 for other tracks. Up to 32 tracks can be
programmed.
5
Press the CD
/
MEMORY/
DISP
CD or MP3/WMA disc Playback
Programmed play
button to start playback.
17
XL-MP2H
Advanced CD or MP3/WMA disc playback (continued)
„ Programmed play (Folder mode)
1
Whilst in the stop mode, press the MEMORY/DISP button
to enter the programming save mode.
MEMORY
CD or MP3/WMA disc Playback
MP3
2
Press the TUNING/FOLDER ( or ) button on the remote
control to select the desired folder.
MEMORY FOLDER
MP3
You can also select a folder by pressing the TUNING/FOLDER
( or ) button on the main unit.
Then press the
or
button on the remote control to select the desired tracks.
Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks
can be programmed.
5
Press the CD
/
button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the MEMORY/DISP button
and press the button or STOP button on the remote control. The
display will show "CLEAR" and all the programmed contents will be
cleared.
Notes:
z If the disc lid is opened, the programmed sequence will be
cancelled.
z The programme will automatically cancelled if you press the ON/
STAND-BY button to enter the stand-by mode or change the
function from CD to another.
z During the programme operation, press the RANDOM button will
automatically cancelled the programme.
CD
STOP
PRESET
MEMORY FOLDER
MP3
You can also select a track by pressing the
button on main unit.
3
1
or
Press the MEMORY/DISP button to save the folder and
track number.
MEMORY
MP3
18
4
2
3
4
5
6
7
8
9
0
+10
MEMORY/
DISP
MP3/WMA folder mode (only for MP3/WMA files)
All the files inside the selected folder will be played back.
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
FOLDER C
(FOLDER 3)
FILE 1
FILE 2
FILE 3
FOLDER D
(FOLDER 4)
FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)
About folder playback order
If MP3/WMA files are recorded in several folders, a folder number will
be set to each folder automatically.
These folders can be selected by the TUNING/FOLDER button on
the remote control. If there is no supported file formats inside the
selected folder, the folder is skipped and the next folder will be
selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.
1. ROOT folder is set as folder 1.
2. As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2.
3. As for folder inside Folder A (Folder C and Folder D), the folder
which is recorded earlier on the disc will be set as folder 3.
4. Because there is no folder in Folder C, Folder D will be set as
folder 4.
5. Folder E that is inside Folder D will be set as folder 5.
6. Folder B inside ROOT folder will be set as folder 6.
* The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that this
unit will playback the files not according to our expected playback
order.
FOLDER B
(FOLDER 6)
FILE 9
FILE 10
FILE 7
FILE 8
CD or MP3/WMA disc Playback
To playback MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download the music files.
You can then playback these downloaded music files by burning
them to a CD-R/RW disc.
XL-MP2H
19
XL-MP2H
MP3/WMA folder mode (only for MP3/WMA files) (continued)
Procedure to playback MP3/WMA disc
To playback CD-R/RW.
1
Press the CD button, and load a MP3/WMA disc.
After disc is loaded, the disc info will be displayed.
FOLDER indicator
CD or MP3/WMA disc Playback
WMA indicator
20
3
MP3
MP3
MP3 indicator
FOLDER
WMA
MP3
4
Total number of folders Total number of tracks
In case in folder mode, proceed to step 2.
In case track is selected, proceed to step 3.
2
Select desired track to be played back by pressing the
or
button. Proceed to step 4.
Press the TUNING/FOLDER (
desired playback folder.
or
) button to select
Press the CD
/
button and playback will start.
Press the MEMORY/DISP button to display Title, Artist and
Album name if it is recorded on the disc.
To cancel the display of Title, Artist and Album name, press the
MEMORY/DISP button twice to display track number.
Title, Artist and Album name will scroll through the LCD display
as follows.
Track number
FOLDER indicator
Title
FOLDER
WMA
MP3
Artist
FOLDER number
Track number
To start playback with folder mode, go to step 4.
To change the playback folder, press the TUNING/FOLDER (
or ) to select another folder.
In case of playback in the folder mode, press the TUNING/
FOLDER ( or ) button, and the desired folder can be selected even though it is in playback mode.
It will continue playback mode in the 1st track of the selected
folder.
Album
MP3 ID3-Tag only support version 1.x.
Note:
If "ERR DISC" is displayed, it means "Copyright protected WMA
file" or "Not supported playback file" is selected.
Listening to the radio
XL-MP2H
Tuning
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the TUNER (BAND) button to select the desired frequency band (FM or AM).
Press the TUNING/FOLDER ( or ) button to tune into
the desired station.
Manual tuning:
Press the TUNING/FOLDER ( or ) button as many times as
required to tune in the desired station.
Auto tuning:
When the TUNING/FOLDER (
or
) button is pressed for
more than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
Radio
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/FOLDER ( or )
button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural
and the sound becomes clearer.
FM stereo receiving indicator
MHz
ST
FM stereo mode indicator
Note:
This product can receive FM stereo/ FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
21
XL-MP2H
Listening to the memorised station Listening to a cassette tape
Memorising a station
Up to 20 stations for FM band, 10 station for AM band can be preset.
1
2
Perform steps 1 - 3 in "Listening to the radio" on page 21.
Press the MEMORY/DISP button to enter the preset tuning
saving mode.
MEMORY
3
Press the PRESET (
be preset.
or
) button to select the channel to
Radio
MEMORY
The number button(s) on the remote control can be used to preset the station. In this example, press 9 after the step 2 above.
4
Press the MEMORY/DISP button.
In this example, "103.25 MHz" FM station is preset on FM
channel 9.
MEMORY
MEMORY
MHz
5 Repeat steps above to add more preset stations.
When presetting a new station, the previous preset station is
cleared.
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become
disconnected.
Listening to preset stations
1 Press the TUNER (BAND) button to select FM or AM.
2 Press the PRESET ( or ) button to select the desired
channel number.
22
Before playback:
For playback, use normal or low-noise tapes for the
best sound.
(Metal or CrO2 tapes are not recommended.)
Do not use C-120 tapes or poor-quality tapes, as they
may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
XL-MP2H
1
2
Press the ON/STAND-BY button to turn the power on.
Pause
Press the PAUSE button to temporarily stop playback or recording. Press it again to resume operation.
Press the TAPE button to select "TAPE" function. "TAPE"
appears.
Fast forward and rewind
Press the F.FWD
or REWIND
button. When the desired
location has been reached, press the STOP/EJECT / button.
3
Press the STOP/EJECT
holder.
4
Load a cassette into the cassette compartment with the
side to be played facing towards you. After loading the cassette push the cassette holder back into position.
5
6
Press the PLAY
/
button to open the cassette
button to begin playback.
Press the STOP/EJECT / button to stop playback at any
time. Press it again to remove the cassette. When the end
of the tape has been reached, automatic stop will be activated.
Automatic stop system:
At the end of the tape whilst recording or playback, the cassette
deck stops automatically and the button is released.
This system does not work in fast forward and rewind operation.
Be sure to press the STOP/EJECT / button when the end of
the tape has been reached.
Caution:
Do not press the PAUSE button whilst the fast forward or rewind operations are in progress. The REWIND
or F.FWD
button will not be released when the tape end is reached. Once
this occur press the STOP/EJECT / button.
Before changing from one tape operation to another, press the
STOP/EJECT / button.
Tape Playback
Tape playback
23
XL-MP2H
Recording on a cassette tape
Tape Recording
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
or the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO2 tapes.
24
Erase - prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the eraseprevention tabs are not removed. Cassette have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape without the tab.
Side A
Tab for side B
Tab for side A
Recording from CD or MP3/WMA disc
1
2
3
4
Press the ON/STAND-BY button to turn the power on.
5
Press the RECORD
button. The PLAY
button is engaged simultaneously and CD recording starts.
Load a blank cassette.
Select "CD" function.
Load the disc to be recorded.
Select the track number if required.
For programmed recording, programme the material in advance (as described under "Programmed Play").
When you want to record music as you listen, press the
RECORD button. Recording starts automatically from the beginning of the track.
6
Press the STOP/EJECT / button to stop recording.
When the end of the tape is reached, the CD player and deck
stop automatically.
XL-MP2H
1
2
3
4
Tune in to the desired station. (See page 21)
Load a blank cassette.
Press the RECORD
button to start recording.
Press the STOP/EJECT
/
Erasing recorded tapes
1
Load the tape to be erased into the cassette compartment
with the side to be erased facing towards you.
2
Press the TAPE button until "TAPE" appears on the display. When operating with the remote control, press the
TAPE button.
3
Press the RECORD
button, which also engages the
PLAY button to begin erasing.
button to stop recording.
When beat is heard
Beat (a high-pitched noise) may sometimes be heard during the recording of radio broadcasts. If this occurs, set the BEAT CANCEL
switch (the rear of the unit) to 1 or 2 position to reduce the level of the
beat noise.
Tape Recording
Recording from the radio
Note:
If you hear a whistling noise whilst recording on AM station, move the
AM loop aerial.
25
Advanced Features
XL-MP2H
Timer and sleep operation
„ Timer playback
5
Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
6
Switch input with the PRESET ( or ) button to select
"TMR-OFF" and then press the CLOCK/TIMER button.
7
Press the PRESET ( or ) button to set hour and then
press the CLOCK/TIMER button.
8
Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 12).
If it is not set, you cannot use the timer function.
2 For timer playback, load the disc to be played back.
1
2
MEMORY FOLDER 1
RANDOM
TRACK WMA MP3 CD
Press the ON/STAND-BY button to turn the power on.
26
RDS
kHz
MHz
SLEEP ROCK CLASSIC POPS JAZZ X BASS ST
Press the CLOCK/TIMER button for about 2 seconds.
9
3
4
PS PTY I
USB
To select the timer playback source, switch input with
PRESET ( or ) button to select "SOURCE".
Within 10 seconds, press the CLOCK/TIMER button.
Press the PRESET ( or ) button to set hour then press
the CLOCK/TIMER button.
Continued to the next page
10
To select CD, press the CD
CLOCK/TIMER button.
11
To select TUNER (BAND), press the TUNER (BAND)
button and then press the CLOCK/TIMER button.
/
button and then press the
13
To select a preset channel number, press the PRESET (
or ) button and then press the CLOCK/TIMER button.
14
Press the SLEEP button for more than 2 seconds to
activate timer function.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
15
Press the ON/STAND-BY button to enter the power standby mode.
16
17
When the preset time is reached, playback will start.
OR
12
Select the band by pressing the PRESET ( or ) button
and then press the CLOCK/TIMER button to set the station selected.
OR
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Advanced Features
XL-MP2H
To cancel Timer function:
Press the SLEEP button for 2 seconds. The "TIMER" indicator will
disappear.
Notes:
z After selecting the playback source, when press the CLOCK/
TIMER button to confirm, "SOURCE" will appear and blink for 2
seconds, then change to CD or TUNER mode.
z When the preset time is reached, playback will start at current
setting if no selected playback source is made.
z The volume cannot be preset during timer operation. It will always
go to volume 16.
27
XL-MP2H
Timer and sleep operation (continued)
„ Sleep operation
The radio, compact disc and cassette tape can all be turned off automatically.
1
2
Play back the desired sound source.
Press the SLEEP button repeatedly to select the time.
To cancel the sleep operation:
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the SLEEP button to select 0
minute.
(Maximum: 90 minutes - Minimum: 10 minutes)
„ To use timer and sleep operation together
Advanced Features
SLEEP
3
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the SLEEP button.
z The remaining sleep time is displayed for about 10 seconds.
z You can change the remaining sleep time whilst it is displayed by
pressing the SLEEP button (steps 2 - 3).
Release the SLEEP button.
"SLEEP" will appear.
MHz
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
SLEEP
4
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
1
2
Set the sleep time (see left, steps 1 - 4).
Whilst the sleep timer is set, set the timer playback (steps 2 10, pages 26 - 27).
Sleep timer setting
Timer playback setting
90 minutes
Sleep operation will
automatically stop.
28
End time
Desired time
Timer playback start time
Headphones
Before plugging in or unplugging the headphones, reduce the volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control.
Troubleshooting chart
XL-MP2H
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
Symptom
The clock is not set to the
correct time.
When a button is pressed,
the unit does not respond.
No sound is heard.
Possible cause
Did a power failure occur? Reset
the clock. (Refer to page 12)
Set the unit to the power standby mode and then turn it back on.
If the unit still malfunctions, reset
it. (Refer to page 30)
Is the volume level set to "0"?
Are the headphones connected?
Are the speaker wires disconnected?
CD player
Symptom
Playback does not start.
Playback stops in the
middle or is not performed
properly.
Playback sounds are
skipped, or stopped in the
middle of a track.
Possible cause
Is the disc loaded upside down?
Does the disc satisfy the
standards?
Is the disc distorted or
scratched?
Is the unit located near excessive
vibrations?
Is the disc very dirty?
Has condensation formed inside
the unit?
References
Enhancing your system
29
XL-MP2H
Troubleshooting chart (continued)
If trouble occurs
Tuner
Symptom
The radio makes unusual
noises continuously.
Possible cause
Is the unit placed near the TV or
computer?
Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
Cassette deck
References
Symptom
Cannot record.
Cannot record tracks with
proper sound quality.
Cannot erase completely.
Sound skipping.
Cannot hear treble.
Sound fluctuation.
Possible cause
Is the erase-prevention tab removed?
Is it a normal tape? (You cannot
record on a metal or CrO2 tape.)
Is there slack in the tape?
Is the tape stretched?
Are the capstan, pinch roller, or
head dirty?
30
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape head, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
Clearing all the memory (reset)
1.Press the ON/STAND-BY button to enter the power standby mode.
2.Push the "RESET" switch.
Remote control
Symptom
The remote control does
not operate.
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
Possible cause
Is the AC power lead of the unit
plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle
incorrect?
Does the remote control sensor
receive strong light?
Caution:
This operation will erase all data stored in memory including clock,
timer setting, tuner preset and CD programme.
Maintenance
Do not touch the laser pickup lens. If
finger prints or dust accumulate on
the pickup, clean it gently with a dry
cotton swab.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause malfunctions.
Cleaning the tape-handling parts
Dirty head, capstan or pinch roller can cause poor sound and tape
jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
When cleaning the head, pinch roller, etc., unplug the unit which
contains high voltages.
A Erase head
B Recording/
Playback head
C Capstan
D Pinch roller
After long use, the deck’s head and capstan may become magnetised, causing poor sound. Demagnetise these parts once every
30 hours of playing/recording time by using a commercial tape
head demagnetiser. Read the demagnetiser’s instructions carefully before use.
References
Cleaning the CD pickup lens
XL-MP2H
31
XL-MP2H
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source
Power
consumption
Dimensions
References
Weight
AC 220 - 240 V, 50/60 Hz
Power on: 18 W
Power stand-by: 0.6 W(*)
Width: 138 mm (5-7/16")
Height: 212 mm (8-11/32")
Depth: 218 mm (8-19/32")
2.6 kg (5.6 lbs.)
(*) This power consumption value is obtained when the unit is in the
power stand-by mode.
Amplifier
Output power
Output terminals
CD player
Type
Signal readout
D/A converter
Frequency
response
Dynamic range
32
90 dB (1 kHz)
Cassette deck
Frequency
response
Signal/noise ratio
Wow and flutter
80 - 8,000 Hz (normal tape)
50 dB (recording/playback)
0.35% (WRMS)
Speaker
PMPO: 26 W (total)
MPO: 13 W (6.5 W + 6.5 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Type
Maximum input
power
Rated input power
Impedance
Dimensions
FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
Weight
Tuner
Frequency range
Compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
2 way speaker system
10 W
5W
4 ohms
Width: 135 mm (5-5/16")
Height: 211 mm (8-5/16")
Depth: 180 mm (7-3/32")
1.5 kg (3.3 lbs.)/each
MEMO
MEMO
1
11/16/05, 4:41 PM
MEMO
MEMO
2
11/16/05, 4:41 PM
FOR LOCATION ENQUIRIES WITHIN
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
NEW ZEALAND
REGARDING YOUR LOCAL
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
VISIT OUR WEBSITE AT
www.sharp.net.au
www.sharp.net.nz
OR CALL SHARP CUSTOMER CARE
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
1300 135 022
(LOCAL CALL COST APPLY WITHIN AUSTRALIA)
SHARP CORPORATION OF AUSTRALIA PTY LTD
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(JUNE 2004)
XL_MP2H Back
1
8/11/06, 5:23 PM
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the
date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused
by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin
infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
OF
N
IO D
AT ITE
R
O IM ive
RP D L Dr
CO N on
P ALA hnst and
R
A ZE Jo kl
SH EW go Auc
N Hu se,
F
O
59 enro
N D
P
O
E
I
AT IMIT
R
L
O . 5
P
Y
R T 40
8
CO P 9 ive 4
P LIA 03 Dr 21
AR TRA 003 ood SW
H
N
S US 40 gw d
A BN ntin oo
A Hu ingw
1 unt
H
4
01
Retailer
rm
Date of Purchase
SP
fo
Model No.
Serial No.
(J
U
N
E
20
For your reference, please enter the particulars of your purchase below and retain,
with your purchase documentation.
04
IMPORTANT
DO NOT RETURN THIS DOCUMENT TO SHARP
)
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
SHARP CORPORATION
XL_MP2H Back
2
92L01LMP200030
06J R MW 1
8/11/06, 5:23 PM