Panduit NK688MBU wire connector Installation Instructions

N ET K EY

NETWORK COMPONENTS

CONTRACTOR GRADE

© Panduit Corp. 2008

N ET K EY

Category 5e & 6 Jack Modules

Part Number: NKP5E88M**, NK688M**

INSTALLATION INSTRUCTIONS NK406A

Retention

Cap

1

Orient jack as shown

Label

Notch

Puck

(NKSPB)

2

CWST

3

P4

T568B

P3 P4

T568A

P2

4

Trim pair separator and/or filler if present.

Option 1 Option 2 5

P1 P2

(T568B shown)

P1 P3

(T568B shown)

** Denotes color.

T568 BA BA

Do not untwist more then 1/8" from the IDC tower

T568 BA BA

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 1 of 2

PDT110

Tool

7

8

10

INSTALLATION INSTRUCTIONS NK406A

9

11

T568 BA BA

Notes:

1. For specified performance, follow TIA/EIA 568-B installation guidelines.

2. Jack Modules can terminate PVC or Plenum rated 22-26 AWG solid or stranded IWC cable with 0.048 inch (1.2 mm) maximum insulated conductor outside diameter.

3. Jack Modules may be re-terminated a minimum of 20 times.

4. For technical and performance information, consult PANDUIT Technical Support.

As with all Communication Components, the following statements apply:

1. Never install communications wiring during a lightning storm.

2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.

3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.

4. Use caution when installing or modifying communication wiring.

For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp

E-mail: [email protected]

Fax:

866-449-1702 www.panduit.com

Page 2 of 2