- Home
- Home security & automation
- Security device components
- Channel Vision
- Central C-0315
- Specification
Channel Vision Central C-0315 Specifications
Add to My manuals1 Pages
Channel Vision C-0315 is a 15dB power injected inline amplifier that provides the lowest induced noise figure available and is designed with the future in mind. Unlike other RF amplifiers, the C-0315 features a bi-directional return path for convenient use. It has a standard wiring layout with a 12VDC input, cable or antenna input, and an output jack to distribute the signal to multiple TVs in a house. The C-0315 also includes a power injector for remote power capability and requires the use of DC passive splitters.
advertisement
C-0315 15dB RF Amplifier
Description
Channel Vision’s 15dB power injected inline amplifier provides the lowest induced noise figure available and is designed with the future in mind. Unlike other RF amplifiers, the C-0315 features a bi-directional return path for
Standard Wiring Layout
12VDC IN RF INPUT
Channel Vision
MULTI-ROOM AUDIO VIDEO TECHNOLOGY
CVT-15PIA
5-42MHz RETURN PATH PASS
54-1000MHz FORWARD PATH
3dB LOW NOISE AMPLIFIER
15dB GAIN
OUT-PWR
Layout with Power Injector
12VDC IN RF INPUT
Channel Vision
CVT-15PIA
5-42MHz RETURN PATH PASS
54-1000MHz FORWARD PATH
3dB LOW NOISE AMPLIFIER
15dB GAIN
OUT-PWR
CVT-PI
HS-3
880
DC Blocker
Cable or
Antenna
Cable or
Antenna
Specifications
Parameter Condition Min Typ Max
Gain f=54MHz 13.5 14.5 15.5
f=1000MHz 14.0 15.5 17.0
Flatness 54-1000MHz - +/-0.8 -
Insertion Loss 5-40MHz -1.5 - -0.5
Return Loss IN 5-40MHz - -18 -14
54-750MHz - -20 -16
750-1000MHz - -16 -14
Return loss OUT 5-40MHz - -18 -14
54-750MHz - -20 -16
750-1000MHz - -16 -14
Tap - Tap Isolation 54-1000MHz - - -
2nd Order Input Intercept - 80 - -
3rd order input intercept - 60 - -
Composite Second Order - - - -60
Composite Triple Beat - - -70 -60
Noise Figure 54-60MHz - 3 3.5
60-750MHz - 2.4 3.0
750-1000MHz - 3 4.0
Hum Modulation - - - -70
Return Path Level 5-27MHz - - 60
27-40MHz - - 40
RFI Isolation 5-1000MHz - - -130
Instructions
Step 1: Mount amplifier.
Step 2: Connect cable or antenna signal to the INPUT jack.
Step 3: Connect OUTPUT jack to distribute signal to all the TV’s in the house.
Step 4: Connect power to 12VDC input, or use PIA (power injector) for remote power capability. Note: must use
DC passive splitters.
Warning
To prevent fire or shock hazard, do not expose this appliance to rain or moisture
Please Note:
The unused trunk line connector of the last outlet device in each trunk line MUST BE TERMINATED using a
75 Ω terminator (model 2101).
234 F ISCHER A VENUE z C OSTA M ESA , CA 92626
(714) 424-6500 z (800) 840-0288 z (714) 424-6510 FAX http://www.channelvision.com z e-mail: [email protected]
advertisement
Related manuals
advertisement