Asrock Core 100HT-BD User manual

Core 100 Series
User Manual
Version 1.0
Published April 2010
Copyright©2010 ASRock INC. All rights reserved.
1
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the manual or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this product contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”
ASRock Website: http://www.asrock.com
2
Safety instructions
Your system is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important
that you read the following safety instructions.
Setting up your system
•
•
•
•
•
•
Read and follow all instructions in the documentation before you operate
your system.
Do not use this product near water or a heated source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for
ventilation. Never insert objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0o C
and 40o C.
If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere rating.
Care during use
•
•
•
•
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned OFF, a small amount of electrical current still
flows. Always unplug all power, modem, and network cables from the
power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug
the power cord and contact a qualified service technician or your retailer.
• The power cord or plug is damaged.
• Liquid has been spilled into the system.
• The system does not function properly even if you follow the operating
instructions.
• The system was dropped or the cabinet is damaged.
• The system performance changes.
No disassembly
NOTE:
The warranty does not apply to products (including HDD, ODD, memory
and warranty seal) that have been damaged as a result of attempting to
disassemble/reassemble the system or modifying the hardware
configuration.
3
Safety cautions and warnings
Optical Drive Safety Information
Optical drives sold with this system contains a CLASS 1 LASER PRODUCT.
CAUTION:
Invisible laser radiation when open. Do not stare into beam or view directly
with optical instruments.
WARNING:
Making adjustments or performing procedures other than those specified
in the user’s manual may result in hazardous laser exposure. Do not
attempt to disassemble the optical drive. For your safety, have the optical
drive serviced only by an authorized service provider.
Product disposal notice
IMPORTANT:
This symbol of the crossed out wheeled bin indicates that the product
(electrical and electronic equipment) should not be placed in municipal
waste. Check local regulations for disposal of electronic products.
Nordic Lithium Cautions (for lithium-ion batteries)
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s instructions.
Installation Notices
Do not place this
product underneath
heavy loads or in an
unstable position.
Do not use or expose this
product around magnetic
fields as magnetic
interference may affect
the performance of the
product.
Do not expose this
product to high levels
of direct sunlight,
high-humidity or wet
conditions.
4
Do not block the air
vents to this product or
impede the airflow in any
way.
Contents
1 Introduction ................................................... 7
1.1
1.2
1.3
1.4
1.5
1.6
2
3
4
5
6
Package Contents ..........................................................
Specifications ................................................................
System Motherboard Components ...............................
Rear Panel Connections ................................................
System Chassis .............................................................
Remote Controller ..........................................................
System Quick Installation .............................
System Components Reinstallation ............
Installing Second HDD ..................................
Driver Installation ..........................................
UTILITY MEMU ...................................................
6.1 Instant Boot ....................................................................
6.1.1 Introduction ..........................................................
6.1.2 Installation ............................................................
6.2 ASRock OC Tuner .........................................................
6.2.1 Introduction ..........................................................
6.2.2 Installation ............................................................
6.3 CyberLink DVD Suite free bundle (Trial version,
including PowerDVD, PowerDirector, etc) ...................
6.4 Symantec Norton AntiVirus Software free bundle
(Trial version) ................................................................
6.5 THX TruStudio PRO Software free bundle ...................
6.6 ASRock AIWI Utility ........................................................
6.7 The best Apple charge companion - ASRock APP
Charger ..........................................................................
7
8
9
11
12
13
14
18
20
22
23
23
23
24
26
26
26
30
32
33
34
35
7 BIOS SSETUP
ETUP UTILITY ........................................... 36
7.1 Introduction ....................................................................
7.1.1 BIOS Menu Bar ....................................................
7.1.2 Navigation Keys ...................................................
7.2 Main Screen ...................................................................
7.3 OC Tweaker Screen ......................................................
7.4 Advanced Screen .........................................................
7.4.1 CPU Configuration ................................................
7.4.2 Chipset Configuration ..........................................
7.4.3 ACPI Configuration ...............................................
7.4.4 Storage Configuration .........................................
7.4.5 USB Configuration ...............................................
36
36
37
37
38
41
42
44
45
46
47
5
7.5 Hardware Health Event Monitoring Screen ..................
7.6 Boot Screen ...................................................................
7.6.1 Boot Settings Configuration ..................................
7.7 Security Screen ............................................................
7.8 Exit Screen ....................................................................
48
48
49
50
51
8 Software Support ........................................... 52
8.1 Install Operating System ...............................................
8.2 Support CD Information .................................................
8.2.1 Running Support CD ............................................
8.2.2 Drivers Menu ........................................................
8.2.3 Utilities Menu ........................................................
8.2.4 Contact Information ..............................................
6
52
52
52
52
52
52
Chapter 1 Introduction
Thank you for purchasing ASRock Core 100 Series, a reliable product
produced under ASRock’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock’s commitment to quality and
endurance.
In this manual, chapter 1 and 2 contain introduction of the hardware and step-bystep guide to the hardware installation. Chapter 3 and 4 contain the configuration
guide to BIOS setup and information of the Support CD.
Because the hardware specifications and the BIOS software might be
updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest VGA cards and CPU support lists on ASRock website
as well. ASRock website http://www.asrock.com
If you require technical support related to this product, please visit our
website for specific information about the model you are using.
www.asrock.com/support/index.asp
1.1 Package Contents
ASRock Core 100 Series
One AC Power Cord
One Anti-Slip Pad
ASRock Support CD
One AC/DC Adapter
ASRock Quick Start Guide
One HDMI to DVI Adapter
Remote Controller
SATA and Power Cables
(Core 100HT / Core 100HT-BD)
7
1.2
*
Specifications
For barebone system, it may not contain memory, HDD or ODD.
Processor
Support Intel® Core TM i3/i5/i7 Mobile Processor
(Arrandale CPU)
Chipset
Mobile Intel® HM55 Express chipset*1
Memory
Support DDR3 800/1066MHz,
2 x SO-DIMM slots, maximun up to 8GB
VGA
Intel® HD Graphics
HDD
2.5” HDD, support second 2.5” HDD
DVD
DVD Super Multi (Core 100 / Core 100HT)
BD Combo*2 (Core 100HT-BD)
Front I/O
2 x USB3.0, 1 x Microphone, 1 x Earphone
Rear I/O
1 x HDMI, 1 x D-Sub VGA, 6 x USB2.0, 1 x S/PDIF,
1 x eSATAII*3
Sound
7.0 Ch HD Audio with THX TruStudio ProTM
LAN
Gigabit LAN
WiFi
802.11b/g/n wireless LAN (Core 100HT / Core 100HT-BD)
Remote
Controller
Support MCE function (Core 100HT / Core 100HT-BD)
Power
90W/19V Adapter
Dimension
195mm(W)x70mm(H)x186m(L)
Volume (liters)
2.5L
*1
*2
*3
Due to WinXP and PCH chipset (HM55) limitations, if you use WinXP, please disable the
BIOS option "USB2.0 Rate Matching Hub" to make USB devices work properly.
(For example, in the process of installing WinXP or using USB3.0 devices.)
For CD-RW write type, only support 4x, 8x, 10x CD-RW DISC format.
For eSATA function, Hot Plug function is supported in AHCI mode only. IDE mode does
not support Hot Plug function.
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, or using the third-party overclocking tools. Overclocking may
affect your system stability, or even cause damage to the components and devices
of your system. It should be done at your own risk and expense. We are not
responsible for possible damage caused by overclocking.
8
1.3 System Motherboard Components
HM55-HT
Design in Taipei
PCIE1
EuP Ready
RoHS
DDR3_A1FSB800
DDR3_B1
1. Northbridge heatsink
2. J1 jumper: For second HDD SATA power cable
3. SATA connector: For second HDD SATA data cable
4. Fan connector
5. Memory socket
6. Fan connector
7. Infrared module header
8. CPU socket
9. Mini-PCI Express expansion slot: For WiFi module
10. Clear CMOS jumper
11. SATA connector: For ODD SATA data cable
12. ATX5V output power connector for slim ODD & 2.5” HDD
13. SATA connector: For HDD SATA data cable
9
NOTE.
1. SATA and Power Connections
Connect to ODD
SATA & Power Connections
HDD
ODD
Connect to HDD
Connect to SATA Connector (11)
Connect to ATX5V Power Connector (12)
Connect to SATA Connector (13)
2. Fan Connection
Fan connector
Fan connector
Ground
+12V
Rotation
Ground
+5V
Rotation
item 4
10
item 6
1.4 Rear Panel Connectinos
25
14
S / PDIF
15
24
23
16
17
21
eSATAII
eSATA
22
18
HDMI
20
19
SONY
14. DC-In jack
15. Optical S/PDIF Out port
16. Mic In (Pink): Microphone
17. Front L/R Out (Lime): Stereo speakers or headphones
18. eSATAII connector
19. Display (VGA) port
20. HDMI connector
21. USB2.0 ports: USB devices
22. LAN (RJ-45) port: Local Area Network
23. Line In (Blue) for 2/4/6 channel; Rear (Blue) for 8 channel
24. Center/LFE (Orange): Center / subwoofer speakers
25. Side port for side speakers
11
MP3
1.5 System Chassis
Opening the system chassis
1. Remove the screws on the backside.
eSATAII
2. Slide the top panel backwards.
HDMI
26
27
31
30
29 28
26. Optical Disc Drive
27. Power ON/OFF button with status indicator
28. Drive activity indicator
29. Earphone
30. Microphone
31. USB3.0 ports: USB devices
12
1.6 R
emote Controller (Core 100HT / Core 100HT
-BD)
Remote
100HT-BD)
Some remote controller functions listed above are only available with the
relative hardware equipments. If the hardware equipments you adopt are not
compatible with the system, you are not allowed to use these functions. This
product is designed to meet MCE standards.
13
Chapter 2 System Quick Installation
1. Connecting USB Devices (USB2.0 Ports)
2. Connecting VGA Monitor (Display (VGA) Port)
3. Connecting the Network (LAN (RJ-45) Port)
4. Connecting HDMI Device (HDMI Port)
14
5. Connecting eSATA Device (eSATA Port)
6. Connecting External Audio Device
(Line In Port for 2/4/6 Channel; Rear Port for 8 Channel)
7. Connecting Stereo Speakers or Headphones (Front L/R Out Port)
8. Connecting Microphone (Mic In Port)
15
9. Connecting Center / Subwoofer Speakers (Center/LEF Port)
10. Connecting Side Speakers (Side Port for 4/6/8 Channel)
11. Connecting Optical Device (Optical S/PDIF Out Port)
12. Connecting Power (DC-In Jack Port)
16
13. Power on the System (Power Switch)
14. Connecting Earphone / Microphone / USB3.0 Devices
17
Chapter 3 System Components
Reinstallation
1. Remove the cover screws on the rear panel.
Note: For safety reasons, please ensure that the power cord is
disconnected before opening the case.
2. Slide the side cover toward the rear panel and pull the side cover
upwards.
3. To change the storage drives, you need to remove SATA and power
cables from ODD / HDD first, and unscrew the screws from both side.
4. Pull ODD / HDD rack backwards and take it out from the bay.
18
5. Unscrew the screws from the side of ODD / HDD rack, and change your
required ODD / HDD.
6. Refer to above steps to place the new ODD / HDD to the chassis.
Replace the side cover and fasten the screws.
19
Chapter 4 Installing Second HDD
1. To install the second HDD, please follow above step 1 to 4, and remove
the ODD and the first HDD in advance. Then fasten the screws of the
second HDD to the rack.
2. Place the first HDD to the rack and fasten the screws from both side.
3. Place the ODD to the rack and fasten the screws from both side.
Replace the rack to the chassis.
20
4. Connect one end of SATA and power cables to the ODD and the other
end to the bottom HDD.
5. Connect the other SATA and power cables to SATAII_3 and J1
connectors on the motherboard.
6. Connect the other end to the top HDD.
7. Replace the side cover and fasten the screws.
21
Chapter 5 Driver Installation
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
22
Chapter 6 Utility Menu
The utilities meu shows the applications and other software that this product
supports.
6.1
Instant Boot
6.1.1 Introduction
Instant Boot, a user-friendly tool that allows you to turn on your PC in just a
few seconds, provides a much more efficient way to save energy, time,
money, and improves system running speed for your system *. It is
applicable to Windows® 7 / 7 64-bit / Vista™ / Vista™ 64-bit / XP / XP 64-bit.
Instant Boot leverages the S3 and S4 ACPI (Advanced Configuration and
Power Interface) features which normally enable the Sleep/Standby and
Hibernation modes in Windows® to shorten boot up time. By calling S3 and
S4 at specific timing during the shutdown and startup process, Instant Boot
allows you to enter your Windows ® desktop in a few seconds.
There are two modes of Instant Boot available: Fast Mode and Regular
Mode. In Fast Mode, it uses S3 and takes only a few seconds for OS to
resume to working state, which is 10 times faster than traditional boot up
time (50 to 60 seconds). Even the Regular Mode is 3 times faster than
traditional boot up time.
Instant Boot guarantees a clean Windows® boot to consume less power,
time and money without any accumulated garbage data, and you can still
keep your data safe even there is a power cut. Also, the Windows® update
speed will become faster.
* This function is applicable ONLY to single user that does not secure ID and Password
to their systems.
* The boot up time depends on the hardware configuration.
23
6.1.2 Installation
Please read below procedures carefully before you install Instant Boot.
A. Install Instant Boot driver from ASRock support CD, or you may click
following link to get the latest utility and BIOS:
http://www.asrock.com/feature/InstantBoot/download.asp
B. Execute the Instant Boot installation program under Windows®. Please
follow the instructions on Instant Boot setup page.
a. Click “Next” to continue.
b. Select destination location. You may choose a different folder if you
need, and click “Next”.
c. Select the start menu folder. You may choose a different folder if you
need, and click “Next”.
24
d. Click “Install” to begin installing Instant Boot driver.
e. Click “Finish” to complete and exit the setup.
C. After the installation is completed, you will find an ASRock Instant Boot icon
on the Windows® desktop.
D. Double click ASRock Instant Boot icon on the desktop, then Instant Boot
main menu will pop up.
E. On Instant Boot main menu, you can choose “Fast Mode”, “Regular Mode” or
“Disable Instant Boot”. After that, please click “Apply” to save the change.
Please notice that you need to keep AC power on if you select “Fast Mode”.
F. When you want to shut down the computer, please simply select “Shut
Down” from Windows® “Start menu”.
G. Now, the system will restart once automatically. After reentering into
OS, the system will shutdown again.
25
H. Next time when you turn on your system, you can enjoy the benefit of
Instant Boot.
6.2
ASR
ock OC TTuner
uner
ASRock
6.2.1 Introduction
ASRock OC Tuner is a user-friendly overclocking tool which allows you to
guard your system by hardware monitor function and overclock your
hardware devices to get the best system performance.
There are 3 major sections that are easy to fine-tune and monitor:
Overclocking, Voltage Control, and Hardware Monitor. In Overclocking section,
you are allowed to overclock CPU frequency for optimal system performance.
In Voltage Control section, you can adjust voltage for DRAM, chipset and CPU
to enhance compatibility and the boost overclocking. In Hardware Monitor
section, it shows the major readings of your system.
6.2.2 Installation
Please read below procedures carefully before you install ASRock OC Tuner.
A. Install ASRock OC Tuner driver from ASRock support CD, or you may click
following link to get the latest utility:
http://www.asrock.com/feature/OCTuner/download.asp
B. Execute the ASRock OC Tuner installation program under Windows®. Please
follow the instructions on Instant Boot setup page.
a. Click “Next” to continue.
26
b. Select destination location. You may choose a different folder if you
need, and click “Next”.
c. Select the start menu folder. You may choose a different folder if you
need, and click “Next”.
d. Click “Install” to begin installing ASRock OC Tuner driver.
e. Click “Finish” to complete and exit the setup.
27
C. After the installation is completed, you will find an ASRock OC Tuner icon
on the Windows® desktop.
D. Double click ASRock OC Tuner icon on the desktop, then ASRock OC Tuner
main menu will pop up.
Auto apply when program starts
If you check this button, it will save your settings when you close OC Tuner
window. And next time when you run OC Tuner, it will start with the
settings you made. If you do not check this button, next time when you run
OC tuner, it will start with the default settings.
Note: Before you select “Auto apply when program starts”, it is recommended to run
some test programs to make sure your system is running very stably.
Auto run when Windows starts
If you click this button, every time you turn on your system and enter
Windows®, the system will automatically start the OC Tuner.
Note: It is not recommended to overclock your system. Overclocking and
over-voltage may affect your system stability, or even cause damage to your
hardware devices. It should be done at your own risk and expense. ASRock is
not responsible for possible damage caused by overclocking and and overvoltage.
Note: If system hangs after overclocking, please remove AC power cord and plug AC
power cord again before you power on your system.
WiFi Radio
If you click this button, the system will automatically start WiFi Radio
function. If you click this button again, and the button shows “OFF WiFi
Radio”, WiFi Radio function will be turned off.
E. There are three sections in ASRock OC Tuner main menu: System Health,
Hardware Monitor, Overclocking and Voltage Control.
28
System Health – In the System Health
section, there are two major chapters:
System Health and CPU Quiet Fan. Under
the System Health chapter, it shows the
major readings of CPU, chipset and GPU
Temperature. You may find out if there’s
any abnormal situation occurs to your
system’s temperature.
Under the CPU Quiet Fan chapter, the
Chassis Fan Speed will show the default
settings of your system. You are able to
adjust the setting too by clicking the
“Up/Down” arrows and confirm by “Go”
afterward.
Hardware Monitor – In the Hardware
Monitor section, it shows the major readings
of your system. There are CPU speed,
Current FSB, Ratio, PCIE Speed and
respective voltages.
Overclocking – In the Overclocking
section, there is a CPU chapter
for parameter settings adjustment in
pursuit of optimal system performance.
Under the CPU chapter, you are able to
fine-tune the CPU frequency and CPU
ratio by clicking the “Up/Down” arrows at
the display panel. After confirmation of the
settings, please click on the “Go” button.
Voltage Control – In the Voltage Control
section, there are many voltage adjustment
items, such as DRAM and CPU items. The
voltage control is relevant to overclocking.
You may adjust respective voltages by
clicking the “Up/Down” arrows and confirm
by “Go” respectively.
29
6.3
CyberLink D
VD Suite free bundle (T
rial version
DVD
(Trial
version,,
including PowerDVD, PowerDirector, etc)
CyberLink DVD Suite includes five softwares: PowerDVD, PowerBackup,
PowerDirector, Power2Go and MediaShow. Please read below description
for details.
PowerDVD
World-renowned and award-winning PowerDVD delivers the ultimate DVD and
high-definition movie experience on the PC. Feature-rich nevigation controls
enhance and personalize the movie experience. Moreover, the latest version
comes with leading video and audio technologies to deliver an exceptional level of
viewing and listening quality. PowerDVD is the obvious choice for anyone looking
to enjoy DVDs and high-definition Discs on the PC.
* The bundled PowerDVD is PowerDVD 8 DTS trial version, which only supports DVD playback
with DTS function. To play back other media such as Blu-ray or Dolby disc, please download
PowerDVD 9 trial version from CyberLink website: www.cyberlink.com
PowerBackup
PowerBackup is a powerful yet practical tool for protecting essential data,
offering a step-by-step approach to saving data onto a disc, a local hard drive, or
via a network.
30
PowerDirector
CyberLink PowerDirector provides cool features to ensure editing movies is fun
and fast! Whether you are an advanced or entry-level video editor, PowerDirector
lets you enhance your camcorder videos and produce professional home movies.
PowerDirector offers a dual mode editing interface, comprehensive production
tools, technologies that save time and maintain your video quality, and a built-in
CD/DVD authoring program. It is your total video editing solution!
Power2Go
CyberLink Power2Go features two easy interfaces for handling all kinds of
content. Express mode allows simple drag-and-drop durning of Data, Music, and
Video files, as well as double-click activation of copying personal discs.
Power2Go advanced mode allows configuration of burning and copying settings,
in addition to utilities for tasks such as ripping files and erasing discs.
MediaShow
MediaShow is an advanced software that lets you create, present and share
multimedia slide shows. It allows you to incorporate images, videos, audio clips
and even PowerPoint slides and add loads of transition effects, titling effects,
background music to create a dazzling slide show.
31
6.4
Symantec Norton AntiVirus Software free bundle
(Trial
(T
rial version)
Protect your PC with Norton Internet Security, the fastest virus, spyware, Internet
protection. Norton Internet Security can stop online identity theft, viruses,
spyware, bots and more, stop attacks before they get on your PC, deliver clear
threat and performance explanations, identify unsafe web sites right in your
search results, and use intelligence-driven Norton Insight Network for faster,
fewer, shorter scans.
32
6.5
THX TTruStudio
ruStudio PRO Sof
tware free bundle
Software
After you install THX audio driver from our support CD, there will be a shortcut
shown on the desktop. Please double-click this icon to install THX
audio driver to your system. Please make sure to connect your
system to the internet during installation process. Then your
system will automatically connect to THX’s website to active. After
the installation completes, the shortcut will be auto-removed. You
will find the THX icon on the Windows® task bar.
Click the THX icon on the Windows® task bar, you will see THX TruStudio PRO
software application as below, which provides Surround /Crystalizer/Speaker/
Smart volume/Dialog plus functions for you. Therefore, you can adjust your
required function and freely enjoy the benefit of THX TruStudio PRO.
33
6.6
ASRock AIWI Utility
To experience intuitive motion controlled games is no longer only available at Wii.
ASRock AIWI utility introduces a new way of PC gaming operation. ASRock AIWI is
the world's first utility to turn your iPhone/iPod touch as a game joystick to control
your PC games. All you have to do is just to install the ASRock AIWI utility either
from ASRock official website or ASRock software support CD to your
motherboard, and also download the free AIWI Lite from App store to your iPhone/
iPod touch. Connecting your PC and apple devices via Bluetooth or WiFi networks,
then you can start experiencing the exciting motion controlled games. Also, please
do not forget to pay attention to ASRock official website regularly, we will
continuously provide you the most up-do-date supported games!
34
6.7
The best Apple charge companion
- ASRock APP Charger
Fast Charge & Charge Anytime!
If you desire a faster, less restricted way of charging your Apple devices, such
as iPhone/iPod/iPad Touch, ASRock has prepared a wonderful solution for
you ¡V ASRock App Charger. Simply installing the App Charger driver, it makes
your iPhone charged much quickly from your computer and up to 40%
faster than before*. ASRock App Charger allows you to quickly charge many
Apple devices simultaneously and even supports continuous charging when
your PC enters into Standby mode (S1), Suspend to RAM(S3), hibernation mode
(S4) or power off (S5)**. With App Charger driver installed, you can easily
enjoy the marvelous charging experience than ever.
35
Chapter 7 BIOS SETUP UTILITY
7.1
Introduction
This section explains how to use the BIOS SETUP UTILITY to configure your system.
The BIOS chip on the system stores the BIOS SETUP UTILITY. You may run the BIOS
SETUP UTILITY when you start up the computer. Please press <F2> or <Del> during
the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST
will continue with its test routines.
If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by
pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system
chassis. You may also restart by turning the system off and then back on.
Because the BIOS software is constantly being updated, the
following BIOS setup screens and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.
7.1.1 BIOS Menu Bar
The top of the
Main
OC Tweaker
Advanced
H/W Monitor
Boot
screen has a menu bar with the following selections:
To set up the system time/date information
To set up overclocking features
To set up the advanced BIOS features
To display current CPU/MB temperature & Vcore voltage
To set up the default system device to locate and load the
Operating System
Security
To set up the security features
Exit
To exit the current screen or the BIOS SETUP UTILITY
Use < > key or < > key to choose among the selections on the menu bar,
and then press <Enter> to get into the sub screen.
36
7.1.2 Navigation Keys
Please check the following table for the function description of each navigation
key.
Navigation Key(s)
/
/
+ / <Enter>
<F1>
<F9>
<F10>
<ESC>
Function Description
Moves cursor left or right to select Screens
Moves cursor up or down to select items
To change option for the selected items
To bring up the selected screen
To display the General Help Screen
To load optimal default values for all the settings
To save changes and exit the BIOS SETUP UTILITY
To jump to the Exit Screen or exit the current screen
7.2 Main Screen
When you enter the BIOS SETUP UTILITY, the Main screen will appear and display
the system overview
OC Tweaker
Main
BIOS SETUP UTILITY
Advanced H/W Monitor
Boot
System Overview
System Time
System Date
BIOS Version
Processor Type
:
:
Processor Speed
:
Microcode Update :
Cache Size
:
Total Memory
DDR3_1
DDR3_2
[14:00:09]
[Fri 03/26/2010]
HM55-HT P1.00
Intel (R) Core (TM) i3 CPU
M 350 @ 2.27GHz (64bit)
2266MHz
20652/9
3072KB
: 2048MB with 256MB shared memory
and 2MB GTT memory
Single-Channel Memory Mode
: None
: 2048MB/533MHz DDR3_1066
Security
Exit
Use [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
+Tab
F1
F9
F10
ESC
Select Screen
Select Item
Change Field
Select Field
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
System Time [Hour:Minute:Second]
Use this item to specify the system time.
System Date [Day Month/Date/Year]
Use this item to specify the system date.
37
7.3 OC TTweak
weak
er Screen
weaker
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker
BIOS SETUP UTILITY
Advanced H/W Monitor
Boot
OC Tweaker Settings
Overclock Mode
BCLK Frequency (MHz)
Boot Failure Guard
Boot Failure Guard Count
Spread Spectrum
[Auto]
[133]
[Enabled]
[3]
[Auto]
Security
Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
CPU Ratio Setting
QPI Frequency
DRAM Frequency
[Auto]
4.800GT [Auto]
DDR3_1066 [Auto]
DRAM Timing Control
VCCM(DRAM) Voltage
[Auto]
Would you like to save current setting as
user defaults ?
Save 1st User Defaults
[User Default 1]
Enter
F1
F9
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual]
and [Optimized]. The default value is [Auto].
BCLK Frequency (MHz)
Use this option to adjust BCLK (Internal Base Clock) frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
Spread Spectrum
This item should always be [Auto] for better system stability.
CPU Ratio Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard.
QPI Frequency
Use this option to adjust QPI (QuickPath Interconnect) frequency. Configuration options: [Auto], [3.200GT], [3.733GT], [4.266GT] and [4.800GT]. The
default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[Auto], [400MHz DDR3_800)] or [533MHz DDR3_1066)].
38
DRAM Timing Control
Use this item to control DRAM Timing.
BIOS SETUP UTILITY
Advanced
DRAM tCL
DRAM Timing Control
DRAM
DRAM
DRAM
DRAM
DRAM
DRAM
DRAM
DRAM
DRAM
DRAM
DRAM
tCL
tRCD
tRP
tRAS
tRFC
tWR
tWTR
tRRD
tRTP
tFAW
Command Rate
7 [Auto]
7 [Auto]
7 [Auto]
20 [Auto]
60 [Auto]
8 [Auto]
4 [Auto]
4 [Auto]
5 [Auto]
16 [Auto]
[Auto]
Min = 6
Max = 11
+F1
F9
F10
ESC
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DRAM tCL
Use this item to adjust the means of memory accessing. Configuration
options : [Auto], [6] to [11].
DRAM tRCD
This controls the number of DRAM clocks for TRCD. Configuration options:
[Auto], [3] to [15].
DRAM tRP
This controls the number of DRAM clocks for TRP. Configuration options:
[Auto], [3] to [15].
DRAM tRAS
This controls the number of DRAM clocks for TRAS. Configuration options:
[Auto], [9] to [31].
DRAM tRFC
This controls the number of DRAM clocks for TRFC. Configuration options:
[Auto], [15] to [255].
DRAM tWR
This controls the number of DRAM clocks for TWR. Configuration options:
[Auto], [3] to [15].
DRAM tWTR
This controls the number of DRAM clocks for TWTR. Configuration options:
[Auto], [2] to [10].
DRAM tRRD
This controls the number of DRAM clocks for TRRD. Configuration options:
Configuration options: [Auto], [4] to [7].
DRAM tRTP
This controls the number of DRAM clocks for TRTP. Configuration options:
[Auto], [2] to [13].
39
DRAM tFAW
This controls the number of DRAM clocks for TFAW. Configuration options:
[Auto], [1] to [63].
DRAM Command Rate
Use this item to adjust DRAM Command Rate. Configuration
options : [1], [2] and [Auto].
VCCM(DRAM) Voltage
Use this to select VCCM(DRAM) Voltage. Configuration options: [Auto],
[1.350V] to [1.801V]. The default value is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.
40
7.4 Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, ACPI Configuration, Storage Configuration and
USB Configuration.
Main
BIOS SETUP UTILITY
Boot
OC Tweaker Advanced H/W Monitor
Advanced Settings
Security
Exit
Options for CPU
WARNING : Setting wrong values in below sections
may cause system to malfunction.
CPU Configuration
Chipset Configuration
ACPI Configuration
Storage Configuration
USB Configuration
BIOS Update Utility
ASRock Instant Flash
Good Night LED
[Disabled]
Enter
F1
F9
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
ASRock Instant Flash
ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This
convenient BIOS update tool allows you to update system BIOS without
entering operating systems first like MS-DOS or Windows®. Just launch
this tool and save the new BIOS file to your USB flash drive, floppy disk or
hard drive, then you can update your BIOS only in a few clicks without
preparing an additional floppy diskette or other complicated flash utility.
Please be noted that the USB flash drive or hard drive must use FAT32/16/
12 file system. If you execute ASRock Instant Flash utility, the utility will
show the BIOS files and their respective information. Select the proper
BIOS file to update your BIOS, and reboot your system after BIOS update
process completes.
Good Night LED
Enable this option to turn off Power LED and Lan LED when the system is
power on. The keyboard LED will also be turned off in S1, S3 and S4 state.
The default value is [Disabled].
41
7.4.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
Configure advanded CPU settings
Intel (R) Core (TM) i3 CPU
M 350 @ 2.27GHz
Frequency
:2.26GHz
Cache L1
:128 KB
Cache L2
:512 KB
Cache L3
:3072 KB
Ratio Status:Unlocked (Min:07, Max:17)
Ratio Actual Value:17
CPU Ratio Setting
[Auto]
Enhanced Halt State
[Enabled]
Intel (R) Virtualization Tech
[Enabled]
CPU Thermal Throttling
[Enabled]
No-Excute Memory Protection
[Enabled]
Hyper Threading Technology
[Enabled]
Active Processor Cores
[All]
A20M
[Disabled]
Intel (R) SpeedStep (tm) tech
[Enabled]
Intel (R) C-STATE tech
[Enabled]
Select the ration
between CPU Core
Clock and the FSB
Frequency.
+F1
F9
F10
ESC
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
CPU Ratio Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard.
Enhance Halt State
All processors support the Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and requires no
hardware support from the chipset. In the C1 power state, the processor
maintains the context of the system caches.
Intel (R) Virtualization Tech
When this option is set to [Enabled], a VMM (Virtual Machine Architecture)
can utilize the additional hardware capabilities provided by Vanderpool
Technology.
CPU Thermal Throttling
You may select [Enabled] to enable CPU internal thermal control mechanism
to keep the CPU from overheated.
No-Excute Memory Protection
No-Execution (NX) Memory Protection Technology is an enhancement to
the IA-32 Intel Architecture. An IA-32 processor with “No Execute (NX)
Memory Protection” can prevent data pages from being used by malicious
software to execute code.
Hyper Threading Technology
To enable this feature, it requires a computer system with an Intel® processor that supports Hyper-Threading technology and an operating system
that includes optimization for this technology, such as Microsoft ® Windows® XP / VistaTM / 7. Set to [Enabled] if using Microsoft® Windows® XP /
VistaTM / 7, or Linux kernel version 2.4.18 or higher.
42
Active Processor Cores
Use this item to select the number of cores to enable in each processor
package. Configuration options: [All], [1] and [2]. The default value is [All].
A20M
Use this item to enable or disable A20M. Legacy OS and AP may need A20M
enabled. The default value is [Disabled].
Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel’s new power saving technology.
Processor can switch between multiple frequency and voltage points to
enable power savings. The default value is [Enabled]. Configuration options:
[Auto], [Enabled] and [Disabled]. If you install Windows® XP and select
[Auto], you need to set the “Power Schemes” as “Portable/Laptop” to enable this function. If you install Windows® VistaTM / 7 and want to enable
this function, please set this item to [Enabled].
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
Intel (R) C-STATE tech.
Intel (R) C-STATE tech. is achieved by making the power and thermal control unit part of the core logic and not part of the chipset as before. Migration
of the power and thermal management flow into the processor allows us
to use a hardware coordination mechanism in which each core can request any C-state it wishes, thus allowing for individual core savings to be
maximized. The CPU C-state is determined and entered based on the lowest common denominator of both cores’ requests, portraying a single CPU
entity to the chipset power management hardware and flows. Thus, software can manage each core independently, while the actual power management adheres to the platform and CPU shared resource restrictions.
C State package limit setting
This item appears only when you set the item “Intel (R) C-STATE tech.” to
[Enabled]. The selected option will programme into C State package limit
register. Configuration options: [Auto], [C3] and [C6]. The default value is
[Auto].
43
7.4.2 Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Share Memory
DVMT Mode Select
DVMT/FIXED Memory
Onboard HD Audio
Internal HDMI
OnBoard Lan
[Auto]
[DVMT Mode]
[Maximum DVMT]
[Enabled]
[Enabled]
[Enabled]
Intel VT-d Configuration
+F1
F9
F10
ESC
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Share Memory
This allows you to set share memory feature. The default value is [Auto].
Configuration options: [Auto], [32MB], [64MB], [128MB] and [256MB].
DVMT Mode Select
Use this option to adjust DVMT mode. The default value is [DVMT Mode].
DVMT (Dynamic Video Memory Technology) is an architecture that offers
breakthrough performance for the motherboard through efficient memory
utilization. In DVMT mode, the graphics driver allocates memory as needed
for running graphics applications and is cooperatively using this memory
with other system components. This item will not be used under Windows®
VistaTM / 7 OS because the driver will intelligently detect physical memory
available and allocate necessary video memory.
DVMT/FIXED Memory
You are allowed to adjust the shared memory size in this item if you set
DVMT Mode Select as [DVMT Mode]. Configuration options: [128MB], [256MB]
and [Maximum DVMT]. The option [Maximum DVMT] only appears when you
adopt the memory module with 1024MB or above.
Onboard HD Audio
This allows you to enable or disable the onboard HD Audio feature.
Internal HDMI
This allows you to enable or disable the Internal HDMI.
OnBoard Lan
This allows you to enable or disable the onboard Lan feature.
Intel VT-d Configuration
Use this to enable or disable Intel® VT-d technology (Intel® Virtualization
Technology for Directed I/O). The default value of this feature is [Disabled].
44
7.4.3 ACPI Configuration
BIOS SETUP UTILITY
Advanced
ACPI Configuration
Suspend To RAM
Check Ready Bit
[Auto]
[Enabled]
Restore on AC/Power Loss
Ring-In Power On
PCI Devices Power On
RTC Alarm Power On
[Power Off]
[Disabled]
[Disabled]
[By OS]
ACPI HPET Table
[Enabled]
Select auto-detect or
disable the STR
feature.
+F1
F9
F10
ESC
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Suspend to RAM
This field allows you to select whether to auto-detect or disable the
Suspend-to-RAM feature. Select [Auto] will enable this feature if the
system supports it.
Check Ready Bit
Use this item to enable or disable the feature Check Ready Bit. This option
only appears when you set “Suspend to RAM” to [Auto].
Restore on AC/Power Loss
This allows you to set the power state after an unexpected AC/Power
loss. If [Power Off] is selected, the AC/Power remains off when the power
recovers. If [Power On] is selected, the AC/Power resumes and the
system starts to boot up when the power recovers.
Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows® VistaTM certification.
45
7.4.4 SA
SATTA Configuration
BIOS SETUP UTILITY
Advanced
Options
Storage Configuration
SATA Operation Mode
SATAII_1
SATAII_2
SATAII_3
eSATA
[IDE]
[Not
[Not
[Not
[Not
Detected]
Detected]
Detected]
Detected]
IDE
AHCI
Disabled
+F1
F9
F10
ESC
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [IDE]. Configuration options: [IDE], [AHCI] and [Disabled]. Please
noted that AHCI mode is not supported under Windows® XP / XP 64-bit OS.
AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance
but IDE mode does not have these advantages.
46
7.4.5 USB Configuration
BIOS SETUP UTILITY
Advanced
USB Configuration
USB Controller
Legacy USB Support
USB 2.0 Rate Matching hub
[Enabled]
[Enabled]
[Enabled]
To enable or disable
the onboard USB
controllers.
USB Keyboard/Remote Power On [Disabled]
[Disabled]
USB Mouse Power On
+F1
F9
F10
ESC
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
USB Controller
Use this item to enable or disable the use of USB controller.
Legacy USB Support
Use this option to select legacy support for USB devices. There are four
configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup
Only]. The default value is [Enabled]. Please refer to below descriptions
for the details of these four options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[Disabled] - USB devices are not allowed to use under legacy OS and
BIOS setup when [Disabled] is selected. If you have USB compatibility
issue, it is recommended to select [Disabled] to enter OS.
[BIOS Setup Only] - USB devices are allowed to use only under BIOS
setup and Windows / Linux OS.
USB 2.0 Rate Matching hub
Use this item to enable or disable the USB 2.0 Rate Matching hub.
Due to WinXP and PCH chipset (HM55) limitations, if you use
WinXP, please disable the BIOS option "USB2.0 Rate Matching
Hub" to make USB devices work properly. (For example, in the
process of installing WinXP or using USB3.0 devices.)
USB Keyboard/Remote Power On
Use this item to enable or disable USB Keyboard/Remote Power On on the
system.
USB Mouse Power On
Use this item to enable or disable USB Mouse Power On on the system.
47
7.5
Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the fan speed.
Main
OC Tweaker
BIOS SETUP UTILITY
Advanced H/W Monitor Boot
Security
Exit
Hardware Health Event Monitoring
CPU Temperature
M/B Temperature
: 37 C / 98 F
: 31 C / 87 F
CPU Fan Speed
Chassis Fan Speed
: N/A
: N/A
Vcore
+ 3.30V
+ 5.00V
: 1.152V
: 3.312V
: 5.080V
CPU Fan Setting
Chassis Fan Setting
F1
F9
F10
ESC
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU Fan Setting
This allows you to set the CPU fan speed. Configuration options: [Full On],
[Automatic mode] and [Manual Mode]. The default is value [Automatic mode].
Chassis Fan Setting
This allows you to set the chassis fan speed. Configuration options: [Full
On], [Automatic mode] and [Manual Mode]. The default is value [Automatic
mode].
7.6 Boot Screen
In this section, it will display the available devices on your system for you to configure the boot settings and the boot priority.
Main
OC Tweaker
BIOS SETUP UTILITY
Advanced H/W Monitor Boot
Boot Settings
Boot Settings Configuration
Security
Configure Settings
during System Boot.
Enter
F1
F9
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
48
Exit
7.6.1 Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Full Screen Logo
AddOn ROM Display
Boot Logo
Boot From Onboard LAN
Bootup Num-Lock
[Enabled]
[Enabled]
[Auto]
[Disabled]
[On]
Disabled: Displays
normal POST messages.
Enabled: Displays OEM
Logo instead of POST
messages.
+F1
F9
F10
ESC
Select Screen
Select Item
Change Option
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Full Screen Logo
Use this item to enable or disable OEM Logo. The default value is [Enabled].
AddOn ROM Display
Use this option to adjust AddOn ROM Display. If you enable the option
“Full Screen Logo” but you want to see the AddOn ROM information when
the system boots, please select [Enabled]. Configuration options: [Enabled]
and [Disabled]. The default value is [Enabled].
Boot Logo
Use this option to select logo in POST screen. This option only appears
when you enable the option “Full Screen Logo”. Configuration options:
[Auto], [EuP], [Scenery] and [ASRock]. The default value is [Auto].
Boot From Onboard LAN
Use this item to enable or disable the Boot From Onboard LAN feature.
Boot Up Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.
49
7.7 Security Screen
In this section, you may set or change the supervisor/user password for the system.
For the user password, you may also clear it.
Main
BIOS SETUP UTILITY
OC Tweaker Advanced H/W Monitor Boot
Security Settings
Security
Exit
Install or Change the
password.
Supervisor Password : Not Installed
User Password
: Not Installed
Change Supervisor Password
Change User Password
Enter
F1
F9
F10
ESC
Select Screen
Select Item
Change
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
50
7.8 Exit Screen
Main
OC Tweaker
BIOS SETUP UTILITY
Advanced H/W Monitor Boot
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load
Load
Load
Load
Security Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
BIOS Defaults
Performance Setup Default (IDE/SATA)
Performance Setup AHCI Mode
Power Saving Setup Default
Enter
F1
F9
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Load Defaults
Save and Exit
Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Save Changes and Exit
When you select this option, it will pop-out the following message, “Save
configuration changes and exit setup?” Select [OK] to save the changes
and exit the BIOS SETUP UTILITY.
Discard Changes and Exit
When you select this option, it will pop-out the following message, “Discard changes and exit setup?” Select [OK] to exit the BIOS SETUP UTILITY
without saving any changes.
Discard Changes
When you select this option, it will pop-out the following message, “Discard changes?” Select [OK] to discard all changes.
Load BIOS Defaults
Load BIOS default values for all the setup questions. F9 key can be used
for this operation.
Load Performance Setup Default (IDE/SATA)
This performance setup default may not be compatible with all system
configurations. If system boot failure occurs after loading, please resume
optimal default settings. F5 key can be used for this operation.
Load Performance Setup AHCI Mode
This performance setup AHCI mode may not be compatible with all system
configurations. If system boot failure occurs after loading, please resume
optimal default settings. F3 key can be used for this operation.
Load Power Saving Setup Default
Load power saving setup default. F6 key can be used for this operation.
51
Chapter 8 Software Support
8 . 1 Install Operating System
This system supports various Microsoft® Windows® operating systems: 7 / 7 64-bit
/ VistaTM / VistaTM 64-bit / XP / XP 64-bit. Refer to your OS documentation for more
information.
8 . 2 Support CD Information
The Support CD contains necessary drivers and useful utilities that enhance the
system features.
8 . 2 . 1 Running The Support CD
To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If the Main Menu did not appear automatically, locate and double click on the
file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.
8 . 2 . 2 Drivers Menu
The Drivers Menu shows the available devices drivers if the system detects
installed devices. Please install the necessary drivers to activate the devices.
8 . 2 . 3 Utilities Menu
The Utilities Menu shows the applications software that the system supports.
Click on a specific item then follow the installation wizard to install it.
8.2.4 Contact Information
If you need to contact ASRock or want to know more about ASRock, welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your
dealer for further information.
52