Oregon Scientific WS901R massager

GETTING STARTED
INSERTING BATTERIES (AAA BATTERIES)
Mini Massager
Model: WS901
USER MANUAL
EN
OVERVIEW
FRONT VIEW
BOTTOM VIEW
INSIDE
1
4
5
3
1.
2.
3.
6
Hold the grey part to turn the hand grip cover counterclockwise and remove
Insert the batteries (3xAAA, not included), matching the polarities.
Replace the hand grip cover and turn clockwise to secure in place
8
2
7
1.
2.
3.
Massager
LCD clock
- : Change value of setting
4.
5.
6.
7.
8.
SET CLOCK : Enter clock settings
- : Change value of setting
Battery compartment (CR2032)
RESET: Reset unit to default settings
Battery compartment (3 x AAA)
LCD DISPLAY
9.
Time
10.
AM/PM
INSERTING BATTERIES (CR2032 BATTERY)
1.
Turn the battery compartment cover counterclockwise and remove
2.
3.
Insert the battery (CR2032, included), matching the polarities(positive side faces outside).
Replace the battery compartment cover and turn clockwise to secure in place
9
11.
Battery low (CR2032)
10
11
SET CLOCK
1.
Press SET CLOCK to enter setting mode.
2.
Press + or - to change the settings or press and hold + / – to rapidly change the settings.
3.
Press SET CLOCK to confirm and move to next setting.
The settings order is: 12/24 hr format, time.
MASSAGER
To activate / deactivate massager
•
Press down on top of the massager to activate
•
Release to deactivate
CHANGING MASSAGER HEADS
PRECAUTIONS
• Do not subject the unit to excessive force, shock, dust, temperature or humidity.
• Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive materials.
• Do not tamper with the unit’s internal components. This invalidates the warranty.
• Only use fresh batteries. Do not mix new and old batteries.
• Images shown in this manual may differ from the actual display.
• When disposing of this product, ensure it is collected separately for special treatment.
• The contents of this manual may not be reproduced without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.
NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you're in the US and would like to
contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support
OR
Call 1-800-853-8883.
For international inquiries, please visit: www2.oregonscientific.com/about/international
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Mini Massager (model: WS901) is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via
our Oregon Scientific Customer Service.
1.
2.
Hold the grey part to turn the massager head counterclockwise and remove
Insert massager head
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired
operation.
WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our
website at www.oregonscientific.com), or on the warranty card for this product) for all inquiries instead.
3.
Hold the grey part and turn the massager head clockwise to secure in place
Oregon Scientific, Inc.
19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
Telephone No.: 1-800-853-8883
SPECIFICATIONS
MAIN UNIT
TYPE
HxWxD
Weight
Power
We
Name:
Address:
DESCRIPTION
146.2 x 90.8 x 90.8 mm
(5.76 x 3.57 x 3.57 in)
320 g (11.29 oz)
without battery
3xAAA for massager (not included)
1xCR2032 for clock (included)
declare that the product
Product No.:
WS901
Product Name: Mini Massager
Manufacturer: iPM Concepts Limited
Address:
Block C, 9/F, Kaiser Estate,
Phase 1, 41 Man Yue St., Hung Hom, Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause
harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.