Philips Streamium Network Music Player NP3700

Register your product and get support at
www.philips.com/welcome
NP3700/12
EN User manual
1 Important
Safety
Environmental notices
Recycling
2 Your NP3700
Introduction
What’s in the box
Overview
Front and rear view
Remote control
Touch screen
Home screen
Play screen
Text entry
3 Prepare
Install batteries into the remote
control
Connect external audio devices
Connect an iPod / iPhone dock
Connect power supply
4 First-time setup
Connect to home Wi-Fi/wired
network
Wireless connection: One-touch
Wi-Fi Protected Setup (WPS)
Wireless connection: Enter
encryption key manually
Wireless connection: Enter IP
address manually
Wired connection
Wired connection: Enter IP
address manually
5 Play from home Wi-Fi/wired
network
Stream from a UPnP server
Library on a UPnP server
Stream from a UPnP server
5
5
6
6
8
8
8
9
9
10
12
12
13
13
15
15
15
15
16
17
18
19
20
21
22
23
24
24
25
25
Play Internet radio stations
Tune to Internet radio stations
Store preset stations
Edit favorite stations
Manage Internet radio online
Manually add stations online
Stream from online music services
Search for music
Alphanumeric search
Quickjump
Superscroll
26
27
27
27
28
30
30
31
31
31
32
6 Multiroom Music
33
7 Play from an external audio device
(AUX)
34
Play from an external audio device
34
8 Settings
35
35
35
35
35
35
35
36
36
36
36
36
36
37
37
37
38
38
39
39
39
40
40
40
40
40
40
40
40
Play modes
Sound settings
Incredible Surround
Bass and treble
Full sound
Direct Source
Display settings
Brightness
Wallpaper
Screensaver
Slideshow settings
Album art
Clicker sound
Clock settings
Alarm
Sleep timer
Date and time
Network settings
Setup network
Device name
USB sharing
Location and time zone
Language
Device information
Check for software upgrades
Demo mode
Call center numbers
Restore factory settings
EN
3
English
Contents
9 Register NP3700 with Philips
Benefits
Register NP3700
Register on the web site
Register on the device
Unregister NP3700
Check registration information
10 Maintenance
Cleaning
41
41
41
41
41
42
42
43
43
11 Technical data
44
12 Troubleshooting
46
13 Contact information
47
4
EN
Safety
Information for Europe:
Know these safety symbols
i Only use this product indoors. Do
not expose the product to dripping /
splashing water, rain or high humidity.
English
1 Important
j Keep this product away from direct
sunlight, naked flames or heat.
k Do not install near any heat sources
such as radiators, heat registers, stoves,
or other electrical equipment (including
amplifiers).
l Do not place any other electrical
equipment on the product.
m Do not place any sources of danger
on the product (e.g. objects containing
liquids, burning candles).
The ‘exclamation mark’ calls attention to
features for which you should carefully read
the supplied literature to prevent operating
and maintenance problems.
The ‘lightening bolt’ symbol indicates
uninsulated components within the product
that can cause an electric shock.
To reduce the risk of fire or electric shock, do
not expose the product to rain or moisture
and do not place any ojects filled with liquids,
such as vases, on the product.
n This product may include batteries.
Please refer to safety and disposal
instructions for batteries in this user
manual.
o This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. Please refer to disposal
instructions in this user manual.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
a Read these instructions.
• Keep this apparatus away from direct sunlight,
b Keep these instructions.
• Ensure that you always have easy access to the
c Heed all warnings.
d Follow all instructions.
e Do not use this product near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not remove the casing of this
product.
naked flames or heat.
power cord, plug or adaptor to disconnect this
apparatus from the power.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Risk of overheating! Never install this
apparatus in a confined space. Always leave
a space of at least four inches around this
apparatus for ventilation. Ensure curtains or
other objects never cover the ventilation slots
on this apparatus.
EN
5
Hearing Safety
Listen at a moderate volume:
Using headphones at a high volume can impair
your hearing. This product can produce
sounds in decibel ranges that may cause
hearing loss for a normal person, even for
exposure less than a minute. The higher
decibel ranges are offered for those that may
have already experienced some hearing loss.
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged listening,
what sounds ‘normal’ can actually be loud and
harmful to your hearing. To guard against this,
set your volume to a safe level before your
hearing adapts and leave it there.
Environmental notices
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirement
of the 1999/5/EC directive.
Class II equipment symbol:
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even at
normally ‘safe’ levels, can also cause hearing
loss.
Be sure to use your equipment reasonably and
take appropriate breaks.
This symbol indicates that this product has a
double insulation system.
Modifications
Modifications not authorized by the
manufacturer may void user’s authority to
operate this product.
Recycling
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for reasonable
periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that you
can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
6
EN
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Information about the use of batteries:
English
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Caution
• Risk of leakage: Only use the specified type of
batteries. Do not mix new and used batteries.
Do not mix different brands of batteries.
Observe correct polarity. Remove batteries
from products that are not in use for a longer
period of time. Store batteries in a dry place.
• Risk of injury: Wear gloves when handling
leaking batteries. Keep batteries out of reach
of children and pets.
• Risk of explosion: Do not short circuit
batteries. Do not expose batteries to
excessive heat. Do not throw batteries into
the fire. Do not damage or disassemble
batteries. Do not recharge non-rechargeable
batteries.
Battery disposal information:
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
EN
7
2 Your NP3700
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
NP3700 can
•
Connect to the existing home Wi-Fi/
wired network, which can consist of
computers and UPnP devices;
•
Connect the existing audio systems
and MP3 players.
•
Connect an iPod/iPhone dock.
With such connections, you can
•
Play Internet radio stations and
*online music services over the
Internet;
•
Play music stored on a computer/
UPnP server;
•
Play music from an audio system/
portable media player through the
speakers.
•
Charge or play your iPod/iPhone
through this unit.
Tip
• *Online services are available in some
countries only.
8
EN
What’s in the box
Check and identify the contents of your
package:
•
Main unit
•
Remote control with batteries
•
AC power adapter
•
Software suite on a CD-ROM
•
Quick Start Guide
English
Overview
Front and rear view
a
b
c
MP3 LINK
f
1.
2.
3.
d
e
DOCKING
p
g
LCD display
Wi-Fi antenna
STANDBY
Press to turn on the set;
To turn off, press to switch to
active standby; or, press and hold
to switch to Eco standby.
Exit Demo mode.
DC IN
h
ETHERNET
i
7.
8.
9.
4.
5.
6.
Mute/ unmute sound.
- VOLUME +
Increase/decrease volume.
MP3 LINK
Audio input socket for a portable
media player to play through the
speakers on this unit
j
10.
3.5 mm headphone jack
DC IN
Socket for the AC power adapter
ETHERNET
Socket for the Ethernet cable that
connects NP3700 with the home
Wi-Fi/wired network, if you want
a wired connection to the home
Wi-Fi/wired network
DOCKING
Socket for connection of an iPod/
iPhone dock (not supplied)
EN
9
1.
Remote control
a
b
c
2.
3.
d
w
e
f
g
v
u
h
t
i
4.
s
r
q
j
k
l
m
n
p
o
10
EN
5.
Press to turn on the unit;
To turn off, press to switch to
active standby; or, press and hold
to switch to Eco standby.
Exit Demo mode.
SETTINGS
Enter the settings menus.
Source selector
Select a media source (FM
RADIO, USB, and DISC are for
MCi8080 only):
INTERNET RADIO: Radio
services provided over the
Internet;
LIBRARY: Media library on a
UPnP media server;
AUX: Connected external audio
device (e.g. an MP3 player or
other portable music players);
ONLINE SERVICES: Supported
music services provided over
the Internet (available in some
countries only);
DOCKING: Supported media on
the connected iPod/iPhone;
FAVORITE
In INTERNET RADIO mode:
Add current station to the list of
Favorite Stations.
/ / /
Navigation buttons
Press to navigate through menus.
/
In LIBRARY/INTERNET RADIO
mode:
Superscroll: In a long list of
options, press and hold to start
Superscroll. Release to jump
to the first item starting with
current alphabet/number.
OK
Confirm selection.
10.
CLEAR
Press to delete the previous
entry;
Press and hold to delete all
entries.
SUBTITLE (for MCi8080 only)
AUDIO (for MCi8080 only)
REPEAT A-B (for MCi8080 only)
SOUND
Select sound settings.
PLAY MODE
Select repeat play or random
play.
DISC MENU (for MCi8080 only)
ZOOM (for MCi8080 only)
ANGLE (for MCi8080 only)
HOME: Return to Home screen
(main menu).
7.
BACK: Go back to previous
screen.
/
Search buttons on the play
screen
In LIBRARY mode:
Press to skip to the previous/
next chapter/track;
Start/pause/resume play;
In LIBRARY mode: Start
to play the entire file folder
(SuperPlay™).
8.
9.
Stop play;
Exit Demo mode.
RATE
In ONLINE SERVICES mode:
Increase/decrease rating* of
current music.
Alphanumeric
buttons
For text entry
In INTERNET RADIO mode:
On the radio play screen, press
and hold a numeric button to
store current station in the
location as a preset station.
In LIBRARY/INTERNET RADIO
mode:
Quickjump: In a long list of
options that are sorted in an
alphabetical order, press once or
repeatedly to select an alphabet,
and jump to the first item that
starts with the selected alphabet.
11.
12.
13.
14.
15.
16.
17.
18.
19.
a/A
Press to switch between lower
and upper cases.
VOL
Increase/decrease the volume.
NOW PLAYING
Return to play screen.
20.
21.
22.
Mute/unmute sound.
SEARCH
Press to start the search/
browsing by alphanumeric entry.
23.
Note
• * Rating current music is available only for
music services that support rating, and is
available only in some countries.
EN
11
English
6.
On NP3700, you enter Home screen after the
first-time setup is complete.
Touch screen
NP3700 is equipped with a touch screen.
AII songs
AII songs
Playlists
Playlists
Artists
Artists
AIbums
AIbums
•
If necessary, tap on the screen to
show functional buttons;
•
Tap on the buttons to select
corresponding functions;
•
Tap on an option to select.
To select a music source, or
enterthe[Settings]menu
•
On Home screen, tap on / to navigate
through icons. Tap on the corresponding
icon to select.
•
Or, press / /OK on the remote control
to select the desired source.
Home screen
To go back to previous screen
•
Press
BACK.
To return to Home screen
•
12
EN
Press
HOME.
To enter text and symbols, you can:
•
tap on the text box and enter text
and symbols with the pop-up keypad
directly
•
press corresponding alphanumeric
buttons on the remote control
Text entry with the remote control
•
To enter letters/numbers/symbols
corresponding to the same alphanumeric
button, briefly and repeatedly press the
button.
•
To enter symbols, press
Play screen
In LIBRARY/INTERNET RADIO/ONLINE
SERVICES mode, Play screen appears when
play starts.
To navigate through menus during music play,
do the following:
1
2
On the remote control, press
use the Navigation buttons.
and then,
To return to Play screen, press NOW
PLAYING.
Tip
• On Play screen, you can also press
repeatedly.
•
To enter space, press
•
To switch between lower and upper
.
cases, press
.
•
To delete previous character, press
To delete all entries, press and hold
.
.
and
repeatedly to select songs.
EN
13
English
Text entry
Tip
• For languages other than English, letters that
an alphanumeric button corresponds to may
vary.
14
EN
English
3 Prepare
MP3 LINK
Install batteries into the
remote control
DOCKING
p
DC IN
ETHERNET
MP3 LINK
Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
• Risk of decreased battery life! Never mix
different brands or types of batteries.
• Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
1
2
Open the battery compartment.
3
Close the battery compartment.
Connect an iPod / iPhone
dock
Insert two AAA R03 batteries with
correct polarity (+/-) as indicated.
MP3 LINK
DOCKING
p
DC IN
ETHERNET
DOCKING
Connect external audio
devices
You can listen to an external audio device
through this unit. To do so, do the following
connection, and then select the AUX mode on
NP3700.
With the connected iPod / iPhone dock, you
can charge or listen to music from your iPod /
iPhone through this unit.
•
Connect a dock (not supplied) to the
DOCKING socket on this unit.
Tip
• To listen to music from the docked iPod /
iPhone, first press DOCKING to select the
dock source.
EN
15
Connect power supply
Warning
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
MP3 LINK
DOCKING
DC IN
p
ETHERNET
DC IN
•
Connect NP3700 to the power supply.
Note
• The type plate information is located at the
bottom of the product.
16
EN
English
4 First-time setup
The first time you turn on NP3700,
1
2
Select the desired language on the screen
as prompted.
To learn major functions on NP3700,
•
Select [Yes, show me the demo],
when asked whether to view demo;
•
If necessary, press
the volume;
•
To exit the demo play, press .
» The unit is switched to Eco
standby.
VOL
to adjust
» Press again to turn on NP3700,
and restart the setup.
To proceed to network setup,
•
Select [No], when asked whether to
view demo.
3
Select your location and time zone from
the list as prompted.
4
Select [Yes], when asked whether to set
up network connection.
EN
17
Connect to home Wi-Fi/
wired network
Connect wirelessly
TwonkyMedia Server
(PC/Mac)
NP3700
Connect through an Ethernet cable
NP3700
TwonkyMedia Server
(PC/Mac)
You can connect NP3700 to home Wi-Fi/
wired network in different ways: wireless or
wired, automatic or manual.
•
Use a router (or Access Point) for home
Wi-Fi/wired network. That is, connect
computers/devices to a router.
•
Connect NP3700 to the router wirelessly
or through an Ethernet cable.
18
EN
•
To have the unit connected to the
Internet over home Wi-Fi/wired network,
ensure that the router connects to
the Internet directly and no dial-up is
required on the computer.
•
To switch between different connection
methods (wireless or wired, automatic
or manual), or switch between different
routers, go to [Settings] > [Network
settings] > [Setup network].
English
» On NP3700, a message appears
when the connection is completed
successfully.
Wireless connection: One-touch WiFi Protected Setup (WPS)
NP3700 supports Wi-Fi Protected
Setup(WPS). You can quickly and securely
connect NP3700 to a wireless router that also
supports the WPS.
You can select one of the two setup methods:
PBC (Push Button Configuration), or PIN
(Personal Identification Number).
Tip
• Wi-Fi Protected Setup(WPS) is a standard
created by Wi-Fi Alliance for easy
establishment of secure wireless home
network.
Turn on WPS-PBC on NP3700
1
2
Select [Yes], when asked whether to set
up network connection (see ‘First-time
setup’).
Select [Wireless (WiFi)] > [Push button
(WPS – PBC)].
2/3
Tip
• To use PIN (Personal Identification Number)
as the setup method: On NP3700, select
[Wireless (WiFi)] > [Pin entry (WPS – PIN)],
and write down the PIN that is displayed on
NP3700; On the router, enter the PIN.
• Consult the user manual of the router to learn
how to enter the PIN the router.
Look for network
Connect to the Internet
Push button (WPS...
Pin entry (WPS - PIN)
•
Connect to the Internet as prompted.
» You enter Home screen after the firsttime setup is complete.
NP3700
Add NP3700 on the router
•
Consult the user manual of the router to
learn how to add a WPS device to the
router. For example:
press and hold the WPS push button.
» The router starts to search for a WPS
device.
Internet
EN
19
1/4
Note
• Ensure that the router connects to the
Internet directly and no dial-up is required on
the computer.
Network A
Network B
Wireless connection: Enter
encryption key manually
Network C
Other ...
NP3700
Tip
• Before you start the network setup, have the
encryption key to your router ready.
1
Select [Yes], when asked whether to set
up network connection (see ‘First-time
setup’).
2
Select [Wireless (WiFi)] > [Look for
network].
» The unit starts to search for wireless
networks.
3
4
Select the desired Wi-Fi network.
As prompted, enter the encryption key to
the network.
» The unit starts to acquire an IP
address assigned by the Wi-Fi network
automatically.
» A message appears when the
connection is completed successfully.
WEP key 1
» A list of available Wi-Fi networks
appears.
1/3
Look for network
Push button (WPS...
Pin entry (WPS - PIN)
20
EN
Successfully
connected to
Network A
English
Tip
• If you have hidden the SSID of the router (e.g.
disable the SSID broadcasting), go to the end
of the list of Wi-Fi network. Select [Other...]
> [Manual SSID entry]. In the text box, enter
the name of the router.
Note
• The router may fail to assign an IP address,
if the DHCP (Dynamic Host Configuration
Protocol) is unavailable or disabled on the
router. You may need to enter the IP address
manually, or press BACK to start re-connecting.
Get the IP address of the router
•
Consult the user manual of the router.
•
Or, to check for the settings of the router,
enter the IP address (e.g. 192.168.1.1) in
the web browser (e.g. Internet Explorer)
of the computer, and then, get the
desired information in the setup page.
Wireless connection: Enter IP address
manually
Enter the IP address manually
•
On the NP3700, enter an IP address that
allows the unit to be in the same subnet
as the router.
For example, if the router has
IP address: 192.168.1.1, Subnet mask:
255.255.255.000;
Then, enter the following on the unit:
IP address: 192.168.1.XX (where XX
denotes a number), Subnet mask:
255.255.255.000.
•
Press / repeatedly to select the entry
location;
NP3700
Stop getting Auto IP
1
Search for the home Wi-Fi network,
and then, connect to the home Wi-Fi
network.
» The unit starts to acquire an IP
address assigned by the Wi-Fi network
automatically.
2
Press BACK on the remote control to
stop getting auto IP.
Acquiring IP address...
Press <Back> to enter
IP address manually
EN
21
•
To enter the desired digits, use the
alphanumeric buttons on the remote
control; or press / repeatedly.
2/2
Wireless (WiFi)
Note
Wired (Ethernet)
• Ensure that you never enter an IP address that
is already assigned to a computer/device on
the network.
Wired connection
Tip
NP3700
• The router may fail to assign an IP address,
if the DHCP (Dynamic Host Configuration
Protocol) is unavailable or disabled on the
router. You may need to enter the IP address
manually, or press BACK to start reconnecting.
Connect to the router by using the Ethernet
cable
1
2
Select [Yes], when asked whether to set
up network connection (see ‘First-time
setup’).
Connect to the Internet
•
Use an Ethernet cable to connect the unit
to the router.
Connect to the Internet as prompted.
» You enter Home screen after the firsttime setup is complete.
NP3700
MP3 LINK
DOCKING
p
DC IN
ETHERNET
12V=1A
To Modem
LAN4
LAN3
LAN2
LAN1
Reset
Internet
Connect to the home Wi-Fi/wired network
•
On the unit, select [Wired (Ethernet)].
» The unit starts to acquire an IP address
assigned by the network automatically.
» A message appears when the
connection is completed successfully.
22
EN
Note
• Ensure that the router connects to the
Internet directly and no dial-up is required on
the computer.
NP3700
Stop getting Auto IP
1
Use an Ethernet cable to connect the unit
to the router.
2
3
On the unit, select [Wired (Ethernet)].
Get the IP address of the router
•
Consult the user manual of the router.
•
Or, to check for the settings of the router,
enter the IP address (e.g. 192.168.1.1) in
the web browser (e.g. Internet Explorer)
of the computer, and then, get the
desired information in the setup page.
Assign the IP address manually
•
On the NP3700, enter an IP address that
allows the unit to be in the same subnet
as the router.
For example, if the router has
IP address: 192.168.1.1, Subnet mask:
255.255.255.000;
Then, enter the following on the unit:
IP address: 192.168.1.XX (where XX
denotes a number), Subnet mask:
255.255.255.000.
•
Press / repeatedly to select the entry
location;
•
To enter the desired digits, use the
alphanumeric buttons on the remote
control; or press / repeatedly.
Press BACK on the remote control to
stop getting auto IP.
Acquiring IP address...
Press <Back> to enter
IP address manually
Note
• Ensure that you never enter an IP address that
is already assigned to a computer/device on
the network.
EN
23
English
Wired connection: Enter IP address
manually
5 Play from home
Wi-Fi/wired
network
Stream from a UPnP server
TwonkyMedia Server
(PC/Mac)
NP3700
Wireless Modem PC
You can stream music between computers and
NP3700, when
•
NP3700 is connected to home Wi-Fi/
wired network;
•
Music sharing is set up on the computers,
other UPnP servers that are also
connected to the home Wi-Fi/wired
network.
With the music sharing software (the supplied
Media Browser and TwonkyMedia Server),
such computers can work as UPnP media
servers (music libraries) of NP3700, if they are
turned on.
24
EN
Power
Through the UPnP (Universal Plug and Play)
protocols, a UPnP media server allows music
files to be streamed from the server to a UPnP
client device (e.g. NP3700). On the UPnP client
device, you can play the music from the server.
NP3700 can also be the UPnP media server of
such computers and other UPnP devices that
are connected to the home Wi-Fi network,
if NP3700 is turned on or switched to active
standby.
Library on a UPnP server
6
On the computers (UPnP servers), the
supplied software Media Browser or
TwonkyMedia Server can access music
libraries that are organized by different media
management software, including Windows
Media Player 11 and iTunes.
Play favorite songs
iTunes is the a trademark of Apple Inc.,
registered in the U.S. and other countries.
1
Ensure that the UPnP server is connected
to the home Wi-Fi/wired network.
2
On NP3700, press LIBRARY on the
remote control.
•
1
2
3
Select a music library.
» You can see the categories by which
the music is sorted (e.g. Artist, Album,
Genre).
4
5
Select your desired track or album.
Press
Go to a list of songs.
On the remote control, press FAVORITE
to add current song to [Favorites].
•
Or, press FAVORITE when listening
to a song.
•
A list of favorite songs is created
under [Media Library] > [Favorites].
To find and play the favorite songs, press
HOMEon the remote control.
» From home screen, you can find the
favorite songs under [Media Library]>
[Favorites].
To remove a favorite song from
[Favorites]
Or, from Home screen, select
[Media Library].
3
English
On NP3700, you may wish to listen to certain
songs from different artists, albums, and
genres. Add the songs to [Favorites].
Stream from a UPnP server
On NP3700, play a music library that is
streamed from a UPnP server (a computer on
the home Wi-Fi/wired network).
To stop play, press .
» Select the song in [Media Library] >
[Favorites]. Press FAVORITE on the
remote control.
to start play.
•
Play starts from the beginning of the
album, if you press
on an album.
•
Play screen appears when play starts
(see ‘Your NP3700’->’Overview’>’Play screen’).
Play photos
•
Press / to rotate the picture;
•
Press / to move to previous/next
picture;
•
Press
to start playing all pictures in
slideshow mode.
EN
25
4
External control from a PC
Through the home W-Fi/wired network, the
Media Browser on a PC (UPnP server) allows
you to control NP3700.
1
On the PC desktop, launch Media
Browser by double clicking the icon.
2
In Media Browser, select songs to be
played on NP3700. Drag the songs to the
icon of NP3700.
» A green “+” appears if the songs are in
supported formats.
•
Select previous/next songs if you
have dragged more than one songs
to NP3700. See the Step 2 above.
•
Fast search forward or backward;
•
Play/pause and resume.
On NP3700, do the following to exit the
external control.
•
Press
•
Press a source selector on the
remote control;
on the remote control;
•
Press ;
•
Press HOME.
Note
• The external control is stopped if the sleeper
timer is turned on after the set time duration.
Play Internet radio stations
To play Internet radio stations, ensure that
•
NP3700 is connected to the Internet over
the home Wi-Fi/wired network.
Note
• Ensure that the router connects to the
Internet directly and no dial-up is required on
the computer.
NP3700
3
On the computer, you can click the
buttons to
•
26
EN
Adjust the volume;
Internet
1
Ensure that NP3700 is connected to the
Internet.
2
On NP3700, press INTERNET RADIO
on the remote control.
•
3
4
English
Tune to Internet radio stations
Or, from Home screen, select
[Internet Radio].
To search for radio stations,
•
Go to [All stations] > [Locations] to
locate stations by region;
•
To search for a station by name,
use the remote control to start
alphanumeric search or Superscroll
(see ‘Play from home Wi-Fi/wired
network’->’Search for music’).
Select the desired station to start play.
To play a preset station
•
Go to [Internet Radio] > [Presets].
•
Or, on the radio play screen, press
the corresponding numeric button
(0-9).
Store preset stations
On NP3700, you can store up to 10 preset
stations. Each preset station corresponds to
a numeric button on the remote control. On
the radio play screen, press a numeric button,
you quickly switch to the corresponding
preset station.
By default, preset stations are pre-loaded to
NP3700 according to the location that you
select during the first-time setup. To check
or change the location, go to [Settings] >
[Location and time zone].
To store preset station
1
Play the desired station (see ‘Play from
home Wi-Fi/wired network’->’Play
Internet radio stations’->’Tune to Internet
radio stations’).
2
On the play screen, press and hold the
desired numeric button (0-9).
» A message appears, indicating that the
station is added to the corresponding
location.
» The new preset replaces the old one if
the location has been filled.
Edit favorite stations
On NP3700, you can mark an Internet radio
station as favorite. All the stations are added
to [Internet Radio] > [Favorite stations]. In
this way, you can quickly access your favorite
stations.
To add a station to [Favorite stations]
•
On a list of stations, select the
desired station. Press FAVORITE on
the remote control.
•
Or, play the desired station. On the
play screen, press FAVORITE on the
remote control.
» A message appears, indicating that
the station is added to [Favorite
stations].
To remove a station from [Favorite stations]
•
Select the station in the list of
stations; or, go to the play screen of
the station. Press FAVORITE again.
•
Or, press CLEAR on the play screen
of the station.
EN
27
Manage Internet radio online
NP3700
Internet
By registering NP3700 on www.philips.com/
welcome (see ‘Register NP3700 with Philips’),
you can log in to Club Philips. On Club Philips,
you can do the following to manage the
Internet Radio on a computer:
•
Edit favorite stations;
•
Manually add stations that you are unable
to find on NP3700.
Edit favorite stations online
28
EN
http://www.philips.com/welcome
Through Club Philips, you can manage the
list of favorite stations on a computer. When
connecting NP3700 to the Internet, you
update the favorite stations on NP3700.
1
On a computer, log in to Club Philips (see
‘Register NP3700 with Philips’).
2
To mark/unmark stations as favorite:
•
Click [Streamium management] >
[Favorites] > [Browse];
•
To change the order of favorite stations in
the list:
•
Click [Prioritize];
•
Click on the row of the station to be
moved;
•
Drag and drop the row upward or
downward.
In [Browse], find the desired stations;
•
Under [Favorite], check the box
corresponding to the station.
» The station is marked as favorite.
•
To unmark, uncheck the box
corresponding to a station.
» On NP3700, you can find the
stations in the desired order
under [Internet Radio] >
[Favorite stations], if you have
connected NP3700 to the
Internet.
Tip
• In the list of favorite stations, to put a favorite
station ahead of the first one, make the station
just behind the first one; drag and drop the
first station downward.
• To put a station behind the last one, make the
station just ahead of the last one; drag and
drop the last station upward.
EN
29
English
3
Manually add stations online
To edit an added station
Manually add stations
Through Club Philips, you can manually
add Internet radio stations to NP3700 on a
computer.
1
On a computer, log in to Club Philips (see
‘Register NP3700 with Philips’).
2
To add a station, click [Streamium
management] > [My media] > [Music].
3
As shown, click the station.
» The text boxes are filled, showing
the information about the station.
•
Click on the text boxes to edit the
information.
In [Music], enter station information in
the text boxes:
•
In [URL], fill in the web site of the
station;
•
In [Nickname], fill in a name that
appears as station name in [My
media];
•
4
•
In [Description], fill in one-word
description about the station, e.g.
music, sports, new.
The description is used as a category
to sort stations under [My media].
Click [Save].
» A station is manually added the below
the edit boxes.
Stream from online music
services
On NP3700, you can enjoy the online music
services.
With the online music services, you can access
their online music libraries.
Create a user account to use the services.
To access some features, you may need to
subscribe services.
Note
• Online services are available in some countries
only.
30
EN
On NP3700, press ONLINE
SERVICESon the remote control.
•
2
3
English
1
Or, from Home screen, go to
[Online services].
On the list of online services, select the
desired option. Press OK to confirm.
To start play, press
•
.
To stop play, press .
Search for music
In a list of options, you can do one of the
following to search for what you need.
Tip
• When searching in the following ways, ensure
2
Enter characters by using the remote
control (see ‘Your NP3700’->’Overview’>’Text entry’).
3
Press OK after completing text entry.
» Search starts.
» You can find a list of items that contain
the characters.
» You can find a close match if there is
no item that contains the character.
that NP3700 is in [Media Library] or [Internet
Radio] mode.
Quickjump
•
Use the navigation keys , , , .
•
Start quick search by using the
alphanumeric search, Superscroll, and
Quickjump.
Note
You can also use Quickjump for alphanumeric
search.
To reach the first item that starts with a
certain letter
•
• Alphanumeric search, Superscroll and
Quickjump are available only when you enter
a long sorted list of options (excluding the
home screen and lists of menus).
On the button corresponding to the
letter, press once or repeatedly until
the letter appears.
Alphanumeric search
In a long list of options, start alphanumeric
search by entering characters that an item
starts with or contains.
1
Press SEARCH on the remote control, if
necessary.
» A text box appears.
To reach the first item that starts with the
next letter
•
Press .
To reach the first item that starts with the
previous letter
•
Press .
EN
31
Superscroll
In a long list of options, Superscroll allows you
to start a search in an alphabetical order. You
can quickly reach the first item that starts with
the selected alphabet.
1
Press and hold / to start Superscroll.
» A pop-up text box appears. Letters are
displayed repeatedly in an alphabetical
order, starting from current letter.
2
Release / when you reach the desired
letter.
» You reach the first item that starts with
the letter.
32
EN
English
6 Multiroom
Music
NP3700
MCi8080
With the Multiroom Music feature, you can play
the same song on MCi8080 and NP3700 at the
same time.
Before you enable this feature, make sure that:
•
both MCi8080 and NP3700 are
connected to the home Wi-Fi
network;
•
you are playing songs from the HDD
connected to MCi8080.
1
Play a song from the HDD connected to
MCi8080.
2
From Home screen of MCi8080, select
[Multiroom Music] to enable the
Multiroom Music feature.
3
Wait until the Multiroom Music feature is
enabled successfully.
•
To cancel simultaneous play, press
MCi8080.
on
Starting Multiroom Music.
Press <STOP> to cancel
Multiroom Music.
EN
33
7 Play from an
external audio
device (AUX)
With the MP3 LINK socket and AUX mode,
NP3700 allows you to play an external audio
device (e.g. a portable media player) through
the speakers of NP3700.
Play from an external audio
device
1 Ensure that the external audio device
is properly connected to NP3700 (see
‘Connect’->’Connect external audio
devices’).
2
On NP3700, select the AUX mode.
• From Home screen, select [MP3
LINK].
•
3
On the external audio device, start music
play.
•
34
Or, press AUX on the remote
control.
EN
For the music play, you can use the
sound settings on NP3700 (see
‘Settings’->’Sound settings’).
Incredible Surround
Incredible Surround allows you to experience
total surround with greater depth and width
of sound, without the use of additional
speakers.
Play modes
•
When playing music, you can choose to play
repeatedly, play in random order, or play one by
one. Select a play mode as desired.
To select a play mode for music play
Before or during music play,
Bass and treble
•
From Home screen, go to [Settings]
> [Play mode]; Or,
Use [Bass / Treble] to adjust the low (bass) or
high (treble) range of musical notes.
•
Press PLAY MODE on the remote
control.
- Play all songs in current folder
»
repeatedly;
1
»
»
From Home screen, go to [Settings] >
[Sound settings] > [Bass / Treble].
•
- Play current song repeatedly;
- Play all songs in current
folder randomly.
2
Sound settings
On NP3700, you can select different sound
settings in [Settings] > [Sound settings].
From Home screen, go to [Settings] >
[Sound settings].
•
2
Or, press SETTINGS on the remote
control to enter [Settings].
Select the option. Press OK to turn it on
or off.
Or,
On the remote control, press SOUND to
enter the menu of sound settings.
•
To exit the menu of sound settings,
press BACK.
Or, press SOUND on the remote
control to enter the menu of sound
settings.
Press / repeatedly to increase/decrease
the level.
•
1
In [Settings] > [Sound settings] >
[Incredible Surround], turn it on or
off.
Press CLEAR to select neutral level.
Full sound
[FullSound] restores the sonic details that
music compression loses (e.g. MP3, WMA).
Turn on or off [FullSound] in [Settings]
>[Sound settings].
Direct Source
With [Direct source], you can turn off the
settings of sound effects on NP3700, including
[FullSound] and [Bass / Treble].
Thus, music plays in an original way, without
the sound effects from NP3700.
•
Turn on or off [Direct source] in
[Settings] > [Sound settings].
Tip
• The sound effect settings are retained and
enabled when [Direct source] is off.
EN
35
English
8 Settings
Display settings
3
In [Screen saver], select [Current
picture].
» Current picture is set as screensaver.
Brightness
On NP3700, you can adjust the brightness of
the display. As desired, the display lights up,
dims or turns off when NP3700 is turned on
or switched to active standby.
Slideshow settings
•
To select a play mode for slideshow
In [Settings] > [Display settings] >
[Brightness when on] or[Brightness
when standby], select an option and
press OK.
When in the slideshow mode, you can view
pictures one by one.
1
From the home screen, go to [Settings] >
[Slideshow settings].
Or, press SETTINGS on the remote
control to enter [Settings].
2
For menus on NP3700, you can set the
background display (wallpaper).
Select one of the following play modes.
Press OK to turn it on or off.
» [Repeat]: Play all pictures repeatedly;
To set wallpaper
» [Shuffle]: Play all pictures randomly.
Wallpaper
1
2
3
On NP3700, select and play a photo.
To set the play time of each picture
Press SETTINGS on the remote control
to select [Settings] > [Display settings] >
[Wallpaper].
1
In [Wallpaper], select [Current picture].
» Current picture is set as wallpaper.
From Home screen, go to [Settings] >
[Slideshow settings] > [Time per slide].
•
2
Or, press SETTINGS on the remote
control to enter [Settings].
In [Time per slide], select the desired
time duration.
Screensaver
On NP3700, the screensaver is turned on
when NP3700 is switched to active standby.
When turned on, the selected screensaver
appears. The clock is shown on the lower right
corner of the screen.
By default, clock display appears as the
screensaver.
To set screensaver
1
2
36
On NP3700, select and play a picture.
Press SETTINGS on the remote control
to select [Settings] > [Display settings] >
[Screen saver].
EN
Album art
Album art (the picture of CD/album cover) is
sometimes available for music downloads. With
some media management software, album
art can be inserted for the songs. By turning
[Album art] on or off, you can choose whether
to show the picture of CD/album cover for
corresponding songs.
To turn on [Album art]
1
From the home screen, go to [Settings] >
[Album art].
Or, press SETTINGS on the remote
control to enter [Settings].
Select [Album art]. Press OK to turn it
on or off.
If [Album art] is on,
» In the list of songs, the album art
appears as thumbnail along with the
corresponding song.
Clock settings
English
2
Alarm
Set the alarm
1
Ensure that you have set the clock (see
‘Settings’->’Date and time’).
2
From Home screen, go to [Settings] >
[Clock settings] >[Alarm].
•
3
» During the song play, the album
art is displayed in full screen as the
background.
4
Or, press SETTINGS on the remote
control to enter [Settings].
To set the source of alarm sound,
•
Select [Music];
» At the set alarm time, last played
song starts/resumes, or you tune
to the last played Internet radio
station.
•
Select [Buzzer].
» At the set alarm time, the buzzer
sounds.
To set the alarm time,
•
Press and hold / , or press
/ repeatedly until you reach the
desired digits. Press OK to confirm.
•
Or, enter the desired digits by using
the alphanumeric buttons on the
remote control.
» The alarm icon appears on the
screen.
To play a song or Internet radio station as
the next alarm sound
Clicker sound
NP3700 can give you an audible feedback
(clicker sound) every time you press a button
on the remote control.
You can turn the clicker sound on or off in
[Settings] >[Clicker sound].
1
Ensure that you have selected [Music] in
the Step 3 above;
2
Before you turn off NP3700, or switch
NP3700 to active standby,
•
Go to [Media Library], and select
and play the desired song;
•
Or, go to [Internet Radio], and tune
to the desired station.
EN
37
Use the alarm
At the set alarm time, music/Internet radio
plays as desired, or the buzzer sounds.
Note
• The alarm sounds even if you have switched
NP3700 to active standby or Eco standby.
• The buzzer sounds instead, if NP3700 fails to
connect to a music library or an Internet radio
station.
• NP3700 is unmuted if it has been muted.
• The alarm sounds in a higher volume if the
volume level is lower than minimum.
To snooze the alarm
•
Press any button on the unit or
the remote control (except for the
volume buttons).
» The alarm sounds again 15
minutes later. The alarm icon
remains.
To turn off the alarm
•
Go to [Settings] > [Clock settings]
> [Alarm]. Select [Alarm off] and
press OK on the remote control.
Date and time
The date and time can be set automatically or
manually.
Automatic setting
For automatic clock setting, use the online
service over the Internet.
Through the online service over the Internet
1
Turn on the unit, if necessary.
•
2
From Home screen, select [Settings] >
[Clock settings] > [Date and time].
•
3
Ensure that the unit is connected to
the home Wi-Fi/wired network and
Internet.
Or, press SETTINGS on the remote
control to enter [Settings].
In [Date and time], select [Current date
and time] > [Automatic (Internet)].
» The unit starts auto time setting over
the Internet.
» A message appears when the setting
is done.
1/3
Sleep timer
With the sleep timer, you can have NP3700
turned off automatically after the set timer
duration.
To set the time duration
1
From the home screen, go to [Settings] >
[Clock settings] > [Sleep timer].
•
Or, press SETTINGS on the remote
control to enter [Settings].
2
Select an option. Press OK to turn it on.
38
EN
Automatic (Internet)
Manual
Tip
English
Network settings
• According to the location and time zone you
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
• To check and change current location and time
zone, go to [Settings] > [Location and time
zone].
Setup network
After the first-time setup, you can change
how NP3700 connectsto home Wi-Fi/wired
network:
Manual setting
•
1
2
Switch between different connection
methods (wireless or wired,
automatic or manual);
•
Switch between different routers.
To do so, do the following:
Turn on the unit, if necessary.
From Home screen, select [Settings] >
[Clock settings] >[Date and time].
•
Or, press SETTINGSon the remote
control to enter [Settings].
3
In [Date and time], select [Current date
and time] > [Manual].
4
To enter date and time,
From Home screen, go to [Settings] >
[Network settings] > [Setup network].
•
2
to select the entry
Or, press SETTINGS on the remote
control to enter [Settings].
Connect NP3700 as you did in the
first-time setup (see ‘First-time setup’>’Connect to home Wi-Fi/wired
network’).
•
Press or
location;
•
Use the alphanumeric buttons to
enter desired digits;
•
Press OK to confirm.
Device name
•
You can also press or
repeatedly, or press and hold or
until the desired digit appears.
In [Device name], you can name/rename your
NP3700. On a connected UPnP server/client,
the NP3700 can be found as named.
Set date/time format
Select how date and time are displayed in the
clock.
1
2
1
Follow Step 1-2 under “Manual setting”.
In [Date and time], go to [Time format]
or [Date format] to select options.
1
From Home screen, go to [Settings] >
[Network settings] > [Device name].
2
In [Device name], press / to select the
entry location; press / repeatedly to
select desired letters.
EN
39
Location and time zone
Demo mode
After the first-time setup, you can change the
selected location and time zone when moving
to a new location or time zone.
After the first-time setup, you can view the
demo again.
According to the selected location and time
zone, NP3700 can
•
•
Set clock automatically over the Internet
(see ‘Settings’->’Date and time’);
1
From Home screen, go to [Settings] >
[Demo mode].
» Demo play starts.
2
To exit the demo play, press .
» The unit is switched to Eco standby.
Pre-load preset Internet radio
stations automatically.
Language
After the first-time setup, you can change the
language selection in [Settings] > [Language].
Device information
From the home screen, go to [Settings] >
[Device ID and information]. You can learn
about information about NP3700, including
model number, name to be shown on a UPnP
server/client, software version and network
settings.
Restore factory settings
You can restore NP3700 to factory settings. All
your settings are removed, including the settings
of network, sound, display, clock, alarm and
language.
1
Go to [Settings] > [Restore factory
settings].
2
As prompted, select [Yes].
» The unit is turned off.
» The unit is turned on again
automatically when the factory settings
are restored.
» Start the first-time setup.
Check for software upgrades
On the NP3700, you can check for software
upgrades. After you click to agree to the terms
and conditions, the downloading and installation
of new upgrades start automatically.
1
Ensure that NP3700 is connected to the
Internet.
2
From Home screen, go to [Settings] >
[Check for software upgrades].
40
EN
To get the product model number
•
Look at the packaging box of the
device or the product label. You can
always find the model number on
the packaging box or product label
(e.g. MCi8080, NP3700).
Benefits
By registering NP3700 on www.philips.com/
welcome, you can
•
Get free software upgrades;
•
Manage your own favorite radio stations;
•
Receive Streamium newsletters.
Note
• Registration of NP3700 requires a valid email
To get the product registration ID
address.
•
Register NP3700
Use a valid email address as the account when
you register NP3700 on www.philips.com/
welcome.
You can complete the registration directly on
www.philips.com/welcome. Or, use an email
address to register on the device, and then,
complete the registration through the web site
link that you received in the email.
Register on the web site
To register NP3700 directly on www.philips.
com/welcome, you need to fill in the following
information as prompted during registration:
•
A valid email address as the registration
account;
•
Product model number;
•
Product registration ID.
On NP3700, go to [Settings] >
[Device ID and information]. Press
repeatedly to find [Product
Registration ID].
Register on the device
Use an email address to register on the
device, and then, complete the registration
through the web site link that you received in
the email.
1
Ensure that NP3700 is connected to the
Internet.
2
To register with www.philips.com/
welcome,
•
On NP3700, select [Settings] >
[User registration] > [Register now]
> [Register on the device];
•
As prompted, enter your valid
email address (see ‘Your NP3700’>’Overview’->’Text entry’).
» You receive an email message
from ConsumerCare@Philips.com.
•
On a computer, use the web site link
in the email to complete registration.
EN
41
English
9 Register
NP3700 with
Philips
Tip
• To log in to Philips online services later,
use the web site link in the email, and the
password.
Unregister NP3700
When registering with www.philips.com/
welcome, you can only use one account for one
unit (e.g. NP3700). For each account, you can
maintain a set of favorite stations and manually
added stations.
To use another account for registration, you
need to unregister current one.
To unregister an account
1
On NP3700, select [Settings] > [User
registration] >[Unregister].
2
As prompted, confirm to start
unregistering the account.
Tip
• When re-registering the account, you can
recover the Internet radio stations that you
maintained with Philips online services.
Check registration
information
You can check whether you have registered
the NP3700, and what account you have
used for registration. To check the information,
go to [Settings] > [User registration] >
[Registration status].
42
EN
English
10 Maintenance
This chapter tells you how to care for NP3700.
Cleaning
Note
• Avoid moisture and abrasion.
1
Clean NP3700 only with a soft dry cloth.
EN
43
11 Technical data
General
AC Power
The voltage information is printed on the
power adaptor (backside).
DC Power
9 V / 2.1 A
Dimensions (L x W x H)
292 x 147.5 x 151.7 mm
Weight (net)
Main unit: ~ 1.47 kg
Power consumption
On
< 25 W
Standby (active)
<4W
ECO (passive) standby
≤ 0.7 W
Audio output
Headphones
1x 3.5 mm jack
40 - 18,000 Hz
32 Ω
Signal to noise ratio (headphones)
typically 85 dBA (IEC)
Distortion (line out / headphones)
<1%
Audio input
MP3 link
1 x 3.5mm jack
Input sensitivity
950 mV
Input impedance
> 10 kΩ
44
EN
Audio amplifier (Digital)
Output power
2 x 5 W (RMS)
Frequency response
30Hz - 20,000Hz (3 dB points)
Signal to noise ratio
≥ 85 dBA (IEC)
Loudspeakers
Power handling
6W
Impedance
8Ω
Sensitivity
83 dB / 1 m / W
Dimensions
2 1/4 inches
Frequency response
40 Hz - 18 kHz
Sound features
FullSound®
Yes (on / off)
BASS / TREBLE control
Yes (on / off)
Incredible Surround
Yes (on / off)
Wireless
Wireless standard
802.11n, backwards compatible to 802.11b/g
Wireless security
WEP (64 or 128 bit),
WPA/WPA2 (8-63 characters)
Frequency range
2412 - 2462 MHz (CH1-CH11) (for /79, /37,
/55, /97)
2412 - 2472 MHz (CH1-CH13) (for /12, /05)
Antenna
1 x vertical, polarized
Wireless protected setup (WPS)
Yes
Display / Clock
Wired standard
802.3 / 802.3 u
Speed
10 / 100 MBit/s
Mode
half / full duplex
Crossover detection (Auto MDIX)
Yes (Auto MDIX)
Resolution
Dotmatrix, 320 x 240 dots (QVGA), color
TFT
Size
3.5 inches
Backlight
Can be turned on/off, or dimmed
Touch screen
Yes
Clock / date display
Yes
Automatic time setting via the Internet
(NPT)
Yes, enabled
Sleep timer
Yes
Internal (key) clicker
Yes
Note
• The wired and wireless network interfaces
cannot be turned on at the same time.
Internet services
Internet radio
My Media
Internet services
Rhapsody Direct * (for /37, /17)
Napster Direct * (for /12, /05 only in Germany/UK)
Both services require user registration with
Rhapsody and Napster respectively.
Decoding capabilities
MP3
8 - 320 kbps (CBR / VBR)
WMA
32 - 192 kbps (CBR / VBR)
AAC (M4A)
16 - 320 kbps (CBR / VBR)
PCM
1x (1.4 Mbps)
FLAC
Yes, supported
Ogg Vorbis
Yes, supported
Real Audio (*. ra)
No, not supported
Playlist support
*.m3u, *.wpl
Yes
iTunes, Rhapsody
Yes (via by-packed UPnP Server)
English
Wired (LAN / Ethernet)
Docking
9 pole MiniDIN socket
Compatible with Philips DCK3060 (external
dock; not included)
5V / 500mA
Others
UPnP
DMP (Local renderer, Local control point)
ECP (Controllable via an external control point)
DLNA
Yes, Version 1.5 (DMP, DMR)
NP3700 can connect to
- Windows Media Player 11, Winamp,TwonkyMedia;
- Philips Music Center WAC3500 / WAC7500 /
MCi500H;
- Philips NAS SPD8020CC;
- Mobile phone Nokia N80, N93, N95.
Note
• Specifications and external appearance are
subject to changes without notice.
EN
45
12 Troubleshooting
I cannot hear any sound or the sound is poor,
what do I do?
•
Press + VOL - to increase the volume.
•
Press the MUTE button again to
reactivate the sound output.
Is there a maximum distance of transmission
between a wireless router and NP3700 for
effective streaming?
Yes. The maximum distance of Wi-Fi
transmission is 250m measured in open
spaces. However, in a home environment,
where solid obstacles such as walls and
doors are present, the effective transmission
distance is reduced to 50-100m. Reposition
the devices if you experience transmission
problems.
I have not received any registration email from
ConsumerCare@Philips.com.
•
Check that the email address that is
entered in the user registration section is
valid and spelled correctly.
•
Check that the PC has an active Internet
connection.
•
The Internet server may be busy, try
again later.
•
Check if the email was redirected to the
spam folder.
How do I avoid Wi-Fi interferences from
other devices that operate in the same
(2.4GHz) frequency spectrum, such as Dect
phones or bluetooth devices?
•
Move NP3700 at least 3m away from
such devices.
•
Use a WEP/WPA encryption key when
you create the wireless connection your
PC / home network.
•
Change the operating channel on the
interfering devices.
•
Turn the devices in different directions to
minimize interference.
46
EN
Argentina
Australia
Austria
Belgium
Belarus
Brazil
Bulgaria
Canada
Chile
China
Colombia
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hong Kong
Hungary
India
Ireland
Israel
Italy
Japan
Korea
Latvia
Luxembourg
Malaysia
Mexico
Netherlands
New Zealand
Norway
(54-11) 4544-2047
1300 363 391
0810 000 205
78250145
882000110068
0800 701 02 03 (all
except Sao Paulo)(11)
2121-0203 (Sao Paulo
only)
8001154424
1-888-744-5477
600 744 5477 (600PHILIPS)
4008 800 008
01 800 700 7445
800222778
800142840
35258759
8000100288
923113415
805025510
8000007520
80031221280
852-2619 9663
680018189
1860-180-1111
16011777
9600900-09
800088774
0570-07-6666
080-600-6600
80002794
4066615644
1800 880 180
01 800 504 6200
8000230076
0800 658 224
22708111
Pakistan
Peru
Philippines
Poland
Portugal
Romania
Russia Federation
Singapore
Slovakia
South Africa
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
Ukraine
United Kingdom
United States
Uruguay
Venezuela
051 580 902-3
0800 00100
(63 2) 667 9000
8003111318
800780903
800894910
(495)961-1111 (local
rate)8-800-200-0880
(mobile phone - free)
65 6882 3999
800004537
(011) 471-5194
900800655
857929100
844800544
0800 231 099
66 2 652 8652
0800 261 3302
8-800-500-69-70
8003316015
1-888-744-5477
(598-2) 619 6666
0800 100 4888
EN
English
13 Contact
information
47
Streamium terms and conditions
Terms and Conditions of Use of your Philips Streamium-enabled Device
Congratulations on your purchase of a Philips Streamium-enabled Device (“Device”). These Terms and
Conditions of Use give you the rights to use certain features on your Device relating to the streaming of
content. You must agree to these Terms and Conditions of Use before using the Device. Your use of the Device
constitutes your agreement to be bound by these Terms and Conditions of Use and will give you the right to
access these features. If you do not agree to these Terms and Conditions of Use, you may return your Device to
the point of purchase. These Terms and Conditions of Use supplement, and do not replace, any terms, conditions
or disclaimers which were provided with your purchase of the Device. All such terms, conditions and disclaimers
remain in full force and effect.
Eligibility for Registration.
You must be at least 14 years of age to assume the responsibilities of these Terms and Conditions of Use. If you
are under 14 years of age, you may not use the Device unless one of your parents or legal guardians assumes
the responsibilities of these Terms and Conditions of Use. Your use of the Device constitutes your
representation that you are either 14 years of age or, if you are under 14 years of age, that your parent or legal
guardian has assumed the responsibilities of these Terms and Conditions of Use.
Restrictions on Modification of your Device
Your Device provides access to certain streams of content. As a condition of obtaining access to those streams
through the Device, you agree not to tamper with or otherwise modify or attempt to modify the Device in any
way (including through the use of software or by making physical alterations to the Device). You agree that you
will not circumvent or attempt to circumvent technological measures employed to control access to, or the
rights in, any content. You agree that you will not circumvent or attempt to circumvent any copy management
system by any means. You agree that you will not decipher or attempt to decipher cryptographic keys or
otherwise defeat or attempt to defeat any security features implemented in the Device or in the content
streams. You agree that you will not use the Device for any unauthorized purpose or in contravention of any law
or regulation.
Disclaimers Regarding Content
The streams of content which are accessible through your Device are not controlled or programmed by Philips.
Rather, they are provided by third parties. Think of your Device (in addition to its other features) as a form of
“tuner” which allows you to receive the content broadcast by many others outside of your local area. Since the
content is provided by others, PHILIPS HAS NO EDITORIAL CONTROL OVER ANY OF THAT CONTENT
RECEIVED THROUGH YOUR DEVICE AND, THEREFORE IS NOT LIABLE FOR CONTENT OR ITS NATURE
OR DELIVERY. PHILIPS DOES NOT ENDORSE ANY OPINIONS EXPRESSED IN ANY CONTENT RECEIVED
THROUGH YOUR DEVICE. PHILIPS DOES NOT GUARANTEE THE TRUTHFULNESS, ACCURACY,
RELIABILITY, COMPLETENESS OR TIMELINESS OF CONTENT. YOU AGREE THAT ANY RELIANCE ON
CONTENT IS AT YOUR OWN RISK.
Limitations on Access to Streams.
Philips does not guarantee access to any particular stream or to the content contained in any stream. Philips
may, in its discretion, add or remove access to any specific stream or content at any time. Some streams are
accessible through arrangements with online service providers which determine which streams are listed on
their directories. Although Philips will strive to provide a good selection of online service providers, Philips does
not guarantee continued access to any specific online service provider. Philips may, in its discretion, add or
remove access to any specific online service provider.
Rights in Content
Content may be protected by copyright laws or other intellectual property or proprietary laws. In some
situations, such as use of the Device in a commercial environment, it may be necessary for you to obtain, at your
own risk, a license or other authorization to use such content. You agree that, in the event such a license or
authorization is necessary, it is your responsibility to obtain any such license or authorization. You agree that you
are solely liable for any damages you may incur resulting from your failure to obtain the proper license or
authorization for use of the content accessible through the Device. You agree that Philips will have no liability to
you with regard to your use of the content.
Changes in Features
Philips may, in its discretion, change the features of the Device, including adding features to, or removing features
from, the Device. Some new features may require changes to these Terms and Conditions of Use. Your use of
those new features will constitute your agreement to the revised Terms and Conditions of Use.
Software and Intellectual Property Rights
You may need to use certain software programs to use or have full access to certain features of the Device. You
received certain software with the purchase of the Device and may receive other software from time to time in
the future. Most of that software is contained in the Device and is not accessible to you. Some of that software
is owned by Philips and some is owned by others. Your use of software owned by Philips is subject to these
Terms and Conditions of Use and any applicable license agreement. Your use of software owned by others is
governed by their applicable license agreements. Your use of software does not transfer any title or ownership
rights in the software to you. Philips retains all its rights in software and other intellectual property, including
copyrights, patent rights, and rights in its trademarks and trade names. You agree that you will not disassemble,
decompile, create derivative works of, reverse engineer, modify, sublicense, distribute the software or use the
software for any unauthorized purpose or in contravention of any law or regulation.
Warranty Disclaimer
PHILIPS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, THAT THE DEVICE WILL
MEET YOUR REQUIREMENTS OR THAT THE USE OF THE DEVICE WILL BE UNINTERRUPTED, TIMELY,
SECURE OR FREE FROM ERRORS. PHILIPS MAKES NO WARRANTY AS TO THE CONTENT CARRIED IN
ANY STREAM. PHILIPS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, AS TO THE
INFORMATION OR CONTENT ACCESSED THROUGH YOUR DEVICE OR TO YOUR RELIANCE ON, OR
USE OF, ANY INFORMATION OR CONTENT ACCESSED THROUGH YOUR DEVICE. SPECIFIC
WARRANTIES WERE PROVIDED WITH YOUR PURCHASE OF YOUR DEVICE AND THOSE WARRANTIES,
INCLUDING ANY DISCLAIMERS TO THOSE WARRANTIES, CONTINUE TO APPLY. Because some
jurisdictions do not permit the disclaimer of implied warranties, such disclaimers may not apply to you.
Limitation of Liability
PHILIPS WILL NOT BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR ANY INDIRECT, INCIDENTAL,
PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR LOST SAVINGS)
OR FOR LOSS OF DATA OR BUSINESS INTERRUPTION ARISING OUT OF OR RELATING TO YOUR USE
OF THE DEVICE WHETHER OR NOT SUCH DAMAGES ARE BASED ON TORT, WARRANTY, CONTRACT
OR ANY OTHER LEGAL THEORY - EVEN IF PHILIPS HAS BEEN ADVISED, OR IS AWARE, OF THE
POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL PHILIPS CUMULATIVE LIABILITY FOR DAMAGE
(FROM ANY CAUSE WHATSOEVER) EXCEED THE AMOUNT YOU PAID FOR YOUR DEVICE.
Miscellaneous
“This agreement will be governed by the laws of the jurisdiction in which the Device was sold and you hereby
consent to the non-exclusive jurisdiction of courts in the relevant country. If any provision of this agreement is
invalid or unenforceable under applicable law, such provision will be deemed modified to the extent necessary
to render such provision valid and enforceable and the other provisions of this agreement will remain in full
force and effect. These Terms and Conditions of Use will not be governed by the United Nations Convention of
Contracts for the International Sale of Goods, the application of which is hereby expressly waived.”
BY USING YOUR DEVICE, YOU REPRESENT THAT YOU HAVE READ AND UNDERSTOOD THESE TERMS
AND CONDITIONS OF USE AND THAT YOU ACCEPT THEM.
NOTICE
SOFTWARE END USER LICENSE AGREEMENT
THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING
AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER
ELECTRONICS B.V. A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT GLASLAAN
2, 5616 LW EINDHOVEN, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND
COLLECTIVELY “PHILIPS”). THIS AGREEMENT GIVES YOU THE RIGHT TO USE CERTAIN SOFTWARE (THE
“SOFTWARE”) INCLUDING USER DOCUMENTATION IN ELECTRONIC FORM WHICH MAY HAVE BEEN
PROVIDED SEPARATELY OR TOGETHER WITH A PHILIPS PRODUCT (THE “DEVICE”) OR A PC. BY
DOWNLOADING, INSTALLING OR OTHERWISE USING THE SOFTWARE, YOU ACCEPT AND AGREE TO
BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE
TO THESE TERMS AND CONDITIONS, DO NOT DOWNLOAD, INSTALL OR OTHERWISE USE THE
SOFTWARE. IF YOU ACQUIRED THE SOFTWARE IN TANGIBLE MEDIA E.G. CD WITHOUT THE
OPPORTUNITY TO REVIEW THIS LICENSE AND DO NOT ACCEPT THESE TERMS, YOU MAY RECEIVE A
FULL REFUND OF THE AMOUNT, IF ANY, THAT YOU PAID FOR THE SOFTWARE IF YOU RETURN THE
SOFTWARE UNUSED WITH PROOF OF PAYMENT WITHIN 30 DAYS FROM THE DATE OF PURCHASE.
1. Grant of License. This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license
to install and use, on the Device or a PC, as applicable, one (1) copy of the specified version of the Software in
object code format as set out in the user documentation solely for your personal use. The Software is “in use”
when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device.
2. Ownership. The Software is licensed and not sold to you. This Agreement grants you only the right to use
the Software, but you do not acquire any rights, express or implied, in the Software other than those specified
in this Agreement. Philips and its licensors retain all right, title, and interest in and to the Software, including all
patents, copyrights, trade secrets, and other intellectual property rights incorporated therein. The Software is
protected by copyright laws, international treaty provisions, and other intellectual property laws. Therefore,
other than as expressly set forth herein, you may not copy the Software without prior written authorization of
Philips, except that you may make one (1) copy of the Software for your back-up purposes only. You may not
copy any printed materials accompanying the Software, nor print more than one (1) copy of any user
documentation provided in electronic form, except that you may make one (1) copy of such printed materials
for your back-up purposes only.
3. License Restrictions. Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign,
loan, or otherwise transfer the Software. You shall not, and you shall not permit any third party, to reverse
engineer, decompile, or disassemble the Software, except to the extent that applicable law expressly prohibits
the foregoing restriction. You may not remove or destroy any product identification, copyright notices, or other
proprietary markings or restrictions from the Software. All titles, trademarks, and copyright and restricted
rights notices shall be reproduced on your back up copy of the Software. You may not modify or adapt the
Software, merge the Software into another program or create derivative works based upon the Software.
4. Termination of certain functionality. The Software may contain components of certain licensed software
including software licensed from Microsoft Corporation (“Microsoft”) which implements Microsoft’s digital
rights management technology for Windows Media. Content providers are using the digital rights management
technology for Windows Media (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so
that their intellectual property, including copyright, in such content is not misappropriated. Your Device may also
use WM-DRM software to transfer or play Secure Content (“WM-DRM Software”). If the security of such
WM-DRM Software is compromised, Microsoft may revoke (either on its own or upon the request of the
owners of Secure Content (“Secure Content Owners”)) the WM-DRM Software’s right to acquire new licenses
to copy, store, transfer, display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s
ability to play unprotected content. A list of revoked WM-DRM Software is sent to your PC and/or your Device
whenever you download a license for Secure Content. Microsoft may, in conjunction with such license, also
download revocation lists onto your Device on behalf of Secure Content Owners, which may disable your
Device’s ability to copy, store, display, transfer, and/or play Secure Content. Secure Content Owners may also
require you to upgrade some of the WM-DRM components distributed with this Software (“WM-DRM
Upgrades”) before accessing their content. When you attempt to play Secure Content, WM-DRM Software built
by Microsoft will notify you that a WM-DRM Upgrade is required and then ask for your consent before the
WM-DRM Upgrade is downloaded. WM-DRM Software built by Philips may do the same. If you decline the
upgrade, you will not be able to access Secure Content that requires the WM-DRM Upgrade; however, you will
still be able to access unprotected content and Secure Content that does not require the upgrade. WM-DRM
features that access the Internet, such as acquiring new licenses and/or performing a required WM-DRM
Upgrade, can be switched off. When these features are switched off, you will still be able to play Secure Content
if you have a valid license for such content already stored on your Device. However, you will not be able to use
certain of the WM-DRM Software features that require Internet access such as the ability to download content
that requires the WM-DRM Upgrade. All title and intellectual property rights in and to the Secure Content is
the property of the respective Secure Content owners and may be protected by applicable copyright or other
intellectual property laws and treaties. This Agreement grants you no rights to use such Secure Content. To
summarize, if the Software contains Microsoft WM-DRM components – Secure Content you
desire to download, copy, store, display, transfer, and/or play is protected by the Microsoft
WM-DRM components of the Software. Microsoft, Secure Content Owners, or Secure Content
distributors may deny you access, or restrict your access, to Secure Content even after you have
paid for, and/or obtained, it. Neither your consent nor the consent or approval of Philips is
necessary for any of them to deny, withhold or otherwise restrict your access to Secure Content.
Philips does not guaranty that you will be able to download, copy, store, display, transfer, and/or
play Secure Content.
5. Open Source Software. (a) This software may contain components that are subject to open-source terms,
as stated in the documentation accompanying the Device. This Agreement does not apply to this software as
such. (b) Your license rights under this Agreement do not include any right or license to use, distribute or create
derivative works of the Software in any manner that would subject the Software to Open Source Terms. “Open
Source Terms” means the terms of any license that directly or indirectly (1) create, or purport to create,
obligations for Philips with respect to the Software and/or derivative works thereof; or (2) grant, or purport to
grant, to any third party any rights or immunities under intellectual property or proprietary rights in the
Software or derivative works thereof.
6. Termination. This Agreement shall be effective upon installation or first use of the Software and shall
terminate (i) at the discretion of Philips, due to your failure to comply with any term of this Agreement; or (ii)
upon destruction of all copies of the Software and related materials provided to you by Philips hereunder.
Philips’s rights and your obligations shall survive the termination of this Agreement.
7. Upgrades. Philips may, at its sole option, make upgrades to the Software available by general posting on a
website or by any other means or methods. Such upgrades may be made available pursuant to the terms of this
Agreement or the release of such upgrades to you may be subject to your acceptance of another agreement.
8. Support Services. Philips is not obligated to provide technical or other support (“Support Services”) for
the Software. If Philips does provide you with Support Services, these will be governed by separate terms to be
agreed between you and Philips.
9. Limited Software Warranty. Philips provides the Software ‘as is’ and without any warranty except that
the Software will perform substantially in accordance with the documentation accompanying the Software for a
period of one year after your first download, installation or use of the Software, whichever occurs first. Philips’
entire liability and your exclusive remedy for breach of this warranty shall be, at Philips’ option, either (i) return
of the price paid by you for the Software (if any); or (b) repair or replacement of the Software that does not
meet the warranty set forth herein and that is returned to Philips with a copy of your receipt. This limited
warranty shall be void if failure of the Software has resulted from any accident, abuse, misuse or wrongful
application. Any replacement Software will be warranted for the remainder of the original warranty period or
thirty (30) days, whichever is longer. This limited warranty shall not apply to you if theif the Software was
provided to you free of charge on an evaluation only basis.
10. NO OTHER WARRANTIES. EXCEPT AS SET FORTH ABOVE, PHILIPS AND ITS LICENSORS DO
NOT WARRANT THAT THE SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL
MEET YOUR REQUIREMENTS. YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE
TO ACHIEVE YOUR INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS
OBTAINED FROM THE SOFTWARE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
PHILIPS AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS, WHETHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, AND ACCURACY OR COMPLETENESS OF RESULTS WITH RESPECT TO
THE SOFTWARE AND THE ACCOMPANYING MATERIALS. THERE IS NO WARRANTY AGAINST
INFRINGEMENT. PHILIPS DOES NOT WARRANT THAT YOU WILL BE ABLE TO DOWNLOAD, COPY,
STORE, DISPLAY, TRANSFER, AND/OR PLAY SECURE CONTENT.
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS OR ITS LICENSORS BE
LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES
WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER
PECUNIARY LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT SHALL PHILIPS’ OR ITS LICENSORS’ AGGREGATE LIABILITY FOR
DAMAGES ARISING OUT OF THIS AGREEMENT EXCEED THE GREATER OF THE PRICE ACTUALLY PAID
BY YOU FOR THE SOFTWARE OR FIVE TEN POUNDS STERLINGUS DOLLARS (510.00).
12. Trademarks. Certain of the product and Philips names used in this Agreement, the Software, and the
printed user documentation may constitute trademarks of the Philips, its licensors or other third parties. You
are not authorized to use any such trademarks.
13. Export Administration. You agree that you will not directly or indirectly, export or re-export the
Software to any country for which the United States Export Administration Act, or any similar United States law
or regulation requires an export license or other U.S. Government approval, unless the appropriate export
license or approval has first been obtained. By downloading or installing the Software you agree to abide by this
Export provision.
14. Governing law. This Agreement is governed by the laws of your country of residence ,residence, without
reference to its conflict of laws principles. Any dispute between you and Philips regarding this Agreement shall
be subject to the non-exclusive jurisdiction of the courts of your country of residence.
15. General. This Agreement contains the entire agreement between you and Philips and supersedes any prior
representation, undertaking or other communication or advertising with respect to the Software and user
documentation. If any part of this Agreement is held invalid, the remainder of this Agreement will continue in
full force and effect. This Agreement shall not prejudice the statutory rights of any party dealing as a consumer.
Written Offer
Philips Electronics Hong Kong Ltd. hereby offers to deliver, upon request, a
copy of the corresponding source code for the open source software packages
used in this product for which such offer is requested by the respective licenses.
This offer is valid up to three years after product purchase. To obtain source
code, please contact open.source@philips.com. If you prefer not to use email
or if you do not receive confirmation receipt within a week after mailing to this
email address, please write to Open Source Team, Philips Intellectual Property
& Standards, P.O. Box 220, 5600 AE Eindhoven, The Netherlands. If you do not
receive timely confirmation of your letter, please email to the email address
above.
This product uses the following open source software:
uClinux for Blackfin 2009R1 Release <http://blackfin.uclinux.org/>, licensed
under GPL V2,
BusyBox R1.13.4 <http://www.busybox.net/>, licensed under GPL V2,
Samba r3.0.25a <http://samba.org/samba/>, licensed under GPL V2,
Wireless Tools for Linux v29 <http://www.hpl.hp.com/personal/Jean_Tourrilhes/
Linux/Tools.html>, licensed under GPL V2,
NTFS-3G driver r2009.11.14 <http://www.tuxera.com/community/>, licensed
under GPL V2,
Das U-Boot r1.1.6 <http://www.denx.de/wiki/U-Boot>, with exclusions for user
programs.
NOTE! This copyright does *not* cover the so-called "standalone"
applications that use U-Boot services by means of the jump table
provided by U-Boot exactly for this purpose - this is merely
considered normal use of U-Boot, and does *not* fall under the
heading of "derived work".
The header files "include/image.h" and "include/asm-*/u-boot.h"
define interfaces to U-Boot. Including these (unmodified) header
files in another file is considered normal use of U-Boot, and does
*not* fall under the heading of "derived work".
Also note that the GPL below is copyrighted by the Free Software
Foundation, but the instance of code that it refers to (the U-Boot
source code) is copyrighted by me and others who actually wrote it.
-- Wolfgang Denk
Linux kernel release 2.6.xx <http://kernel.org/>, licensed under GPL V2 with
exclusions for user programs.
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
Also note that the GPL below is copyrighted by the Free Software
Foundation, but the instance of code that it refers to (the Linux
kernel) is copyrighted by me and others who actually wrote it.
Also note that the only valid version of the GPL as far as the kernel
is concerned is _this_ particular version of the license (ie v2, not
v2.2 or v3.x or whatever), unless explicitly otherwise stated.
Linus Torvalds
GPL V2
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS
NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type
`show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License. Of course, the commands you
use may be called something other than `show w' and `show c'; they could
even be mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.
uClibc r0.9 <http://www.uclibc.org/>, , licensed under LGPL V2,
LGPL V2
GNU LIBRARY GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1991 Free Software Foundation, Inc.
675 Mass Ave, Cambridge, MA 02139, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the library GPL. It is
numbered 2 because it goes with version 2 of the ordinary GPL.]
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
Licenses are intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users.
This license, the Library General Public License, applies to some
specially designated Free Software Foundation software, and to any
other libraries whose authors decide to use it. You can use it for
your libraries, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if
you distribute copies of the library, or if you modify it.
For example, if you distribute copies of the library, whether gratis
or for a fee, you must give the recipients all the rights that we gave
you. You must make sure that they, too, receive or can get the source
code. If you link a program with the library, you must provide
complete object files to the recipients so that they can relink them
with the library, after making changes to the library and recompiling
it. And you must show them these terms so they know their rights.
Our method of protecting your rights has two steps: (1) copyright
the library, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the library.
Also, for each distributor's protection, we want to make certain
that everyone understands that there is no warranty for this free
library. If the library is modified by someone else and passed on, we
want its recipients to know that what they have is not the original
version, so that any problems introduced by others will not reflect on
the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that companies distributing free
software will individually obtain patent licenses, thus in effect
transforming the program into proprietary software. To prevent this,
we have made it clear that any patent must be licensed for everyone's
free use or not licensed at all.
Most GNU software, including some libraries, is covered by the ordinary
GNU General Public License, which was designed for utility programs. This
license, the GNU Library General Public License, applies to certain
designated libraries. This license is quite different from the ordinary
one; be sure to read it in full, and don't assume that anything in it is
the same as in the ordinary license.
The reason we have a separate public license for some libraries is that
they blur the distinction we usually make between modifying or adding to a
program and simply using it. Linking a program with a library, without
changing the library, is in some sense simply using the library, and is
analogous to running a utility program or application program. However, in
a textual and legal sense, the linked executable is a combined work, a
derivative of the original library, and the ordinary General Public License
treats it as such.
Because of this blurred distinction, using the ordinary General
Public License for libraries did not effectively promote software
sharing, because most developers did not use the libraries. We
concluded that weaker conditions might promote sharing better.
However, unrestricted linking of non-free programs would deprive the
users of those programs of all benefit from the free status of the
libraries themselves. This Library General Public License is intended to
permit developers of non-free programs to use free libraries, while
preserving your freedom as a user of such programs to change the free
libraries that are incorporated in them. (We have not seen how to achieve
this as regards changes in header files, but we have achieved it as regards
changes in the actual functions of the Library.) The hope is that this
will lead to faster development of free libraries.
The precise terms and conditions for copying, distribution and
modification follow. Pay close attention to the difference between a
"work based on the library" and a "work that uses the library". The
former contains code derived from the library, while the latter only
works together with the library.
Note that it is possible for a library to be covered by the ordinary
General Public License rather than by this special one.
GNU LIBRARY GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software library which
contains a notice placed by the copyright holder or other authorized
party saying it may be distributed under the terms of this Library
General Public License (also called "this License"). Each licensee is
addressed as "you".
A "library" means a collection of software functions and/or data
prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work
which has been distributed under these terms. A "work based on the
Library" means either the Library or any derivative work under
copyright law: that is to say, a work containing the Library or a
portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for
making modifications to it. For a library, complete source code means
all the source code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control compilation
and installation of the library.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output from
such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the absence of any
warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange for a
fee.
2. You may modify your copy or copies of the Library or any portion
of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices
stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a
table of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure that,
in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of
its purpose remains meaningful.
(For example, a function in a library to compute square roots has
a purpose that is entirely well-defined independent of the
application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must
be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Library,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Library.
In addition, mere aggregation of another work not based on the Library
with the Library (or with a work based on the Library) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License. (If a newer version than version 2 of the
ordinary GNU General Public License has appeared, then you can specify
that version instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of
the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you accompany
it with the complete corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the
source code from the same place satisfies the requirement to
distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the
Library, but is designed to work with the Library by being compiled or
linked with it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library
creates an executable that is a derivative of the Library (because it
contains portions of the Library), rather than a "work that uses the
library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file
that is part of the Library, the object code for the work may be a
derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be
linked without the Library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small inline
functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may
distribute the object code for the work under the terms of Section 6.
Any executables containing that work also fall under Section 6,
whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also compile or
link a "work that uses the Library" with the Library to produce a
work containing portions of the Library, and distribute that work
under terms of your choice, provided that the terms permit
modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the
Library is used in it and that the Library and its use are covered by
this License. You must supply a copy of this License. If the work
during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one
of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including whatever
changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked
with the Library, with the complete machine-readable "work that
uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified
executable containing the modified Library. (It is understood
that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application
to use the modified definitions.)
b) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
c) If distribution of the work is made by offering access to copy
from a designated place, offer equivalent access to copy the above
specified materials from the same place.
d) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed for
reproducing the executable from it. However, as a special exception,
the source code distributed need not include anything that is normally
distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot
use both them and the Library together in an executable that you
distribute.
7. You may place library facilities that are a work based on the
Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined
library, provided that the separate distribution of the work based on
the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work
based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your
rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Library or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the
original licensor to copy, distribute, link with or modify the Library
subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
11. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the Library by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply,
and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Library under this License may add
an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may publish revised and/or new
versions of the Library General Public License from time to time.
Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library
specifies a version number of this License which applies to it and
"any later version", you have the option of following the terms and
conditions either of that version or of any later version published by
the Free Software Foundation. If the Library does not specify a
license version number, you may choose any version ever published by
the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free
programs whose distribution conditions are incompatible with these,
write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
Appendix: How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest
possible use to the public, we recommend making it free software that
everyone can redistribute and change. You can do so by permitting
redistribution under these terms (or, alternatively, under the terms of the
ordinary General Public License).
To apply these terms, attach the following notices to the library. It is
safest to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least the
"copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with this library; if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the library, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
library `Frob' (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
Curl and libcurl 7.19.7 <http://curl.haxx.se/>, licensed under a MIT/X derivate
license,
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose
with or without fee is hereby granted, provided that the above copyright
notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization of the copyright holder.
OpenSSL 1.0.0 <http://www.openssl.org/>, licensed under both OpenSSL
License and Original SSLeay license,
OpenSSL License
/*
* Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
Original SSLeay License
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an
acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.
com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
Ogg Vorbis <http://xiph.org/vorbis/>, licensed as below,
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
FLAC <http://flac.sourceforge.net/index.html>, licensed as below,
Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh
Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
NP3700_UM_12_EN_wk1050.1