v1.0 (1.0.1.0) (EN/F)
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
user manual
guide de l’utilisateur
RC66i
EN/F
It is important to read this user manual prior to using your new product for the first time.
Nous vous recommandons de lire ce manuel avant d’utiliser votre nouveau produit
pour la première fois.
FCC information
iPhone is a trademark of Apple Inc.
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses, and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
Apple is not responsible for the
operation of this device or its
compliance with safety and regulatory
standards.
“Made for iPod” means that an
electronic accessory has been designed
to connect specifically to iPod and has
been certified by the developer to meet
Apple performance standards.
However, there is no guarantee
that interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an
experienced radio/TV technician for
help.
“Works with iPhone” means that an
electronic accessory has been designed
to connect specifically to iPhone and has
been certified by the developer to meet
Apple performance standards.
Illustrations contained within this
publication are for representation only
and subject to change.
The descriptions and characteristics
given in this document are given as
a general indication and not as a
guarantee. In order to provide the
highest quality product possible,
we reserve the right to make any
improvement or modification without
prior notice.
This Class B digital apparatus
complies with Canadian ICES-003.
Cet appareil numérique de la class
B est conforme à la norme NMB-003
du Canada.
Modifications not expressly approved
by the party responsible for compliance
could void the user’s authority to
operate the equipment.
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near
water.
• Clean only with dry cloth.
• Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
• Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
• No naked flame sources such as
lighted candles should be placed on
the apparatus.
• Do not defeat the safety purpose
Plugging in for power
• Connect the supplied power adapter
to the unit’s DC jack, and connect to
a convenient wall outlet.
• This clock can also be powered by 4
“AA” batteries. Refer to “Operating
by batteries” section for details.
• Refer to the “Clock” section and
follow the instructions to get the
clock time shown correctly with the
Auto Clock set feature.
Battery back-up operation
This clock radio is equipped with a
memory holding system that can
be powered with 2 “AA” batteries
(included and installed). The power
failure protection circuit will not
operate unless battery is installed. When
normal household power is interrupted,
or AC line cord is unplugged, the
batteries will power the clock radio to
keep track of time and alarm settings
programmed into memory. When the
battery backup functions, the digital
display will not light, however, the
function of alarm still occurs during the
power interruption if remaining battery
power is adequate. Normal operation
will resume after AC power is restored
so you will not have to reset the time or
the alarm.
To install or replace the batteries:
1. Sliding the lock switch which
located at the bottom of the clock
radio to the right.
Remote control
iPod/
– Select iPod mode; start or
pause playback
AUX – Select AUX mode
RADIO/BAND – Select RADIO mode;
select radio band
REPEAT – Select repeat playback mode
for iPod/iPhone
– Adjust display brightness
SHUFFLE – Select random playback
mode for iPod/iPhone
AM ANT – Connect to the AM loop
antenna
VOL + / - – Adjust volume
AUX IN – Auxiliary input jack
STORE – Save radio stations as presets
DC jack – Connect to the power
adapter
Seattle
Olympia
Washington
Maine
Montana
Salem
North Dakota
Helena
Augusta
Bismarck
Minnesota
Idaho
Montpelier N.H.
Vt.
Concord
Boston
Albany
Mass.
Providence
Hartford R.I.
Conn.
New York
Pennsylvania
Philadelphia Trenton
New Jersey
Harrisburg
St. Paul
Boise
South Dakota
Wisconsin
Pierre
Wyoming
New York
Michigan
Lansing
Madison
Detroit
Chicago
Iowa
Cheyenne
Carson City
Salt Lake City
Nevada
Nebraska
Des Moines
Lincoln
Utah
Denver
Topeka
Colorado
California
Kansas
Las Vegas
Los Angeles
Indiana
Columbus
Missouri
Summer
Kentucky
Winter
Arizona
Oklahoma
Oklahoma City
New Mexico
HawaiiAleutian
(HST)
D.C.
North Carolina
Tennessee
Arkansas
Memphis
Columbia
Atlanta
Little Rock
Mississippi
Dallas
Alabama
Montgomery
South
Carolina
Georgia
Jackson
Louisiana
Texas
Austin
Houston
Baton
Rouge
New Orleans
Florida
Miami
Pacific Mountain
(PST) (MST)
Central
(CST)
Eastern
(EST)
Puerto Rico
Atlantic
(AST)
Canadian time zones
To tune frequency:
• Press << or >>. The selected
frequency shows on the display.
• Press and hold to automatically
search for the next available station.
Antenna
Yukon
Territory
Nunavut
Northwest Territories
British
Columbia
Newfoundland
Summer
Winter
Alberta
Saskatchewan
Manitoba
Built-in AFC
The Built-in Automatic Frequency
Control (AFC) works only on FM. It helps
reducing drift on FM reception and
keeping the radio locked in on the FM
station to which it is tuned.
Saskatoon
Ontario
Winnipeg
Pacific Mountain Central
(PST) (MST)
(CST)
Eastern
(EST)
Atlantic
(AST)
This unit allows 2 wake times to be set.
1. Press SET on the top of the unit
until a WAKE 1 icon ( ,
or
) or a WAKE 2 icon ( ,
or
)
flashes on the display.
5. Sliding the lock switch to the left to
lock.
• It is recommended that you replace
the batteries every year.
• It is recommended to plug the
unit for AC power while replacing
batteries to avoid the loss of clock
and wake time/mode settings.
To install or replace the batteries:
1. Apply thumb pressure to the tab
on battery door which located at
the bottom of the clock radio and
then lift the door out and off the
cabinet.
2. Insert or replace 4 AA batteries.
3. Replace the compartment door.
2
4
2. Press << or >> on the top of the
unit to set the wake time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
3. To save and exit the wake setting,
wait for about 5 seconds or press
SET until the clock setting icon (
) is off and the wake setting icons (
/
/
or
/
/
) are either
off or stop flashing.
• To check the wake time after
setting, press SET until a WAKE
/
) or WAKE 2
1 icon ( /
icon (
/
/
) flashes and
the respective assigned wake time
shows on the display.
Select the wake source
You may be woken up by the alarm,
radio, or music from iPod/iPhone.
1. Set a wake time (refer to the above
instructions).
If Waking to Alarm ( , ) is
selected:
• Wake to Alarm uses GRAD-UWAKE, a gentle increase to the
maximum alarm tone volume over
30 to 45 seconds.
• If you set the wake function with
low volume level before going
to bed, we advise using Waking
to Alarm mode to wake you up
since the volume will automatically
increase.
If Waking to RADIO ( ,
) is
selected:
3. Select a desired wake up radio
channel (refer to “Listening to the
radio”). If no wake up channel is
set, your last listening radio station
will be selected.
4. Adjust the volume to your desired
level.
5. Press OFF to turn off the unit.
4. Press OFF to turn off the unit.
Note: If there is no iPod/iPhone
connected, the alarm tone will sound
instead even if Waking to iPod mode
is selected.
• When the wake
function activates, the
corresponding wake
icon will flash until the wake
function is turned off. The icon
will then stop flashing and keep
lighting up.
• When the AC/DC adapter is
disconnected, all wake mode will
be reverted to alarm tone.
Turn off the wake
function
To silence the wake function
momentarily:
• Press SNOOZE. The alarm will sound
again when the snooze period is
over. (refer to “SmartSnoozeTM”).
OR
Electrical consumption
SWITCHING ADAPTER POWER SUPPLY:
AC INPUT: 100 - 240 V ~ 50/60 Hz
DC OUTPUT: 8 V 1.87 A
STORE – Save radio stations as presets
SHUFFLE – Select random playback mode for iPod/
iPhone
WAKE 1 – Activate or change Wake 1 settings
SLEEP – Refer to “Sleep
function”
NAP – Refer to “NAP function”
WAKE 2 – Activate or change Wake 2 settings
Universal dock for iPod/iPhone
(push to open or close)
<< or >> – Search radio frequencies; skip or search music
file in iPod/iPhone; adjust clock time, wake time and
snooze period
SNOOZE – Turn off the wake
function momentarily; turn off
the sleep function
SET – Enter setting mode for setting clock time, Wake 1
time or Wake 2 time
VOL – / VOL + – Adjust volume
TIME ZONE – Time zone selection (refer to “Clock”)
1
5
DST – Daylight saving time (refer to “Clock”)
Front view
Power failure indicator
When AC power is interrupted
(disconnected) for a short period of
time, both time and alarm settings
will change (unless batteries are
installed). After AC power is restored
(reconnected), the Digital Display
will blink to indicate that power was
Display
Clock
Auto clock set
• This clock radio can be powered by
4 AA batteries (not included). When
the unit is disconnected from the
AC power and operates by the 4 AA
will
batteries, the battery icon
be lighted to indicate the unit is
operating on battery.
• When the unit is reconnected to the
Sound source selection
Off
(standby
mode)
This unit does not have the
charging function. The 4 AA
batteries inserted will not be
charged.
Battery icon
Be sure to replace with new
batteries with the AC power
connected. Otherwise, the
memory of time and alarm settings
may be lost.
You do not have to set the clock time as
a built-in automatic time set system is
equipped in this clock powered by 2 AA
batteries (included and installed).
To get the clock time shown
correctly:
1. Plug for power
• Plug in the AC/DC adaptor into an
AC power outlet.
AC power, the battery icon
will not be displayed to indicate the
unit is operating on AC power.
• LCD backlight and touch control
keys on the front panel will be
turned on for a while when the
keys are pressed.
• iPod/iPhone charging is not
available when operating by
batteries.
2. Select daylight saving
• Press and hold DST on the top of
the unit to turn on/off in areas
observing/not observing such time
change.
• A confirmation message
(off) shows on the
(on) or
display when you make a selection.
3. Select your time zone
• Press TIME ZONE repeatedly on the
top of the unit to cycle through the
time zones (EST > CST > MST > PST
> AKST > HST > AST > EST...). The
default time zone is Eastern (EST)
(refer to the maps on the right).
• The selected time zone shows on
the display briefly with TIME ZONE
icon flashes on the display.
WARNING: Please avoid playing with
these buttons after entering the Clock/
Alarm set mode.
Setting clock manually
In case the memory holding batteries
are accidentally removed, set the clock
manually as below:
1. Press SET on the top of the unit
until the clock setting icon
flashes on the display.
2. Press << or >> on the top of the
unit to set the clock time. The time
decrements or increments follow by
a faster rate when you press and
hold the button.
flashes
• The clock setting icon
when you are setting the time. AM
or PM icon also lights beside the
time.
Auxiliary source
for better reception.
Listening to iPod/iPhone
Station presets
To connect iPod/iPhone:
1. Push the universal dock for iPod/
iPhone on the front of the unit to
open it.
To store a station as preset:
1. Tune to a radio station.
2. Press STORE.
• An available preset location
(e.g.
) shows on the display.
3. Press << or >> (or RECALL) to select
a desired preset location (01 - 20).
4. Press STORE.
•
shows on the display as
confirmation.
• You can save up to 20 preset
stations.
To recall a preset station:
1. In radio mode, press RECALL.
• The existing preset station number
shows on the display.
2. Press << or >> (or RECALL) to select
a desired preset station.
2. Four adapters are supplied. Check
the table below and use the
appropriate adapter for your iPod/
iPhone.
Models
Adapters
iPhone 4 GB, 8 GB, and
16 GB
12
iPod nano (3rd
generation) 4 GB and
8 GB
13
iPod touch
14
iPhone 3G
15
• For the latest iPod/iPhone models,
please use the adapter provided
with your iPod/iPhone.
3. Place the adapter and then your
iPod/iPhone on the universal dock
for iPod/iPhone.
To select iPod/iPhone mode:
• Press iPod/iPhone on the front of
the unit to select the iPod mode.
To stop the wake function:
• Press OFF. The alarm will be on
again the following day at the same
time.
OR
To disable the wake function
completely:
• Press WAKE 1 or WAKE 2
repeatedly until no corresponding
wake indicator ( , ,
or , ,
) shows on the display.
TM
SmartSnooze
This operation allows extra sleep time
after the wake function is on. The alarm
will be off by pressing SNOOZE, VOL +,
VOL –, SLEEP or NAP until the snooze
period is over. Snooze function can be
used repeatedly up to 1 hour. After this,
the wake function will turn off until the
next day.
To set the “quiet” period:
While pressing SNOOZE, press << or
>> on the top of the unit to set the
“quiet” period from 1 to 30 minutes
(default: 9 minutes). Release SNOOZE,
then the “quiet” period is set.
In the sleep mode, the radio, iPod or
AUX mode turns off automatically.
To set the sleep time:
1. Press SLEEP repeatedly to cycle
among the sleep time available
(90min, 60min, 30min, 15min and
OFF. Off is the default setting.
When you first set the sleep time,
the sleep time is default to 90 min).
• The icon
flashes while selecting.
2. When the desired sleep time is
selected, release SLEEP and wait for
about 5 seconds, the sleep time is
now set.
• The icon
lights on the display.
To listen to
• The radio
not, press
station as
3. To save and exit the clock setting,
wait for about 5 seconds or press
SET until the clock setting icon (
) is off and the wake setting icons (
/
/
or
/
/
) are either
off or stop flashing.
• Your clock is now set and ready
for use.
iPod/iPhone
AM Antenna
For AM reception, connect the AM
antenna loop to the back of the radio.
Stretch out the antenna cord to its
fullest length and rotate the antenna
If Waking to iPod/iPhone (
,
) is
selected:
3. Adjust the volume to your desired
level. The last played file on the
iPod/iPhone will be played when the
wake function activates.
Product: Clock Radio
Brand: RCA
Model: RC66i
RECALL – Recall preset radio stations
Top view
• The iPod mode icon ( ) lights on
the display.
• Playback from the iPod/iPhone starts
automatically.
• If no iPod/iPhone is connected
in the iPod mode, the unit will
exit the iPod mode and turn off
automatically.
Works with:
• iPhone 3GS 16GB, 32GB
• iPhone 3G 8GB, 16GB
Made for:
• iPod touch 2nd generation 8GB,
16GB, 32GB, 64GB
• iPod touch 1st generation 8GB,
16GB, 32GB
• iPod nano 5th generation 8GB
or 16GB
• iPod nano 4th generation
(video) 8GB, 16GB
• iPod nano 3rd generation
(video) 4GB, 8GB
• iPod classic 80GB, 120GB, 160GB
• iPod nano 2nd generation
(aluminum) 2GB, 4GB, 8GB
• iPod nano 1GB, 2GB or 4GB
• iPod 5th generation (video)
30GB, 60GB, 80GB
• iPod mini 4GB, 6GB
• iPod 4th generation 20GB, 40GB
• iPod 4th generation (color
display) 20GB, 30GB, 40GB, 60GB
Sleep function
2. Press WAKE 1 or WAKE 2 to select
a wake mode. Corresponding icon
lights on the front of the unit.
– Wake 1 by alarm
– Wake 1 by radio
– Wake 1 by iPod/iPhone
– Wake 2 by alarm
– Wake 2 by radio
– Wake 2 by iPod/iPhone
Technical information
REPEAT – Select repeat playback mode for iPod/iPhone
4. Close the compartment door.
Wake function
Set wake time
In the event that service should be
required, you may need the model
number and the serial number. In the
space below, record the date and place
of purchase and the serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
BRIGHTNESS – Adjust display brightness
Quebec
Regina
For your records
This clock radio can be powered by 4
“AA” batteries (not included).
When the battery level drops even
lower, the unit will be shut down.
To select radio band:
• In radio mode, press RADIO to
select the radio band (AM/FM).
• The selected radio band icon lights
on the display.
Help protect the environment - we
recommend that you dispose of used
batteries by putting them into specially
designed receptacles.
Operating by batteries
Raleigh
Nashville
Santa Fe
Phoenix
Ohio
Md.
Delaware
Annapolis
West
Virginia
Washington,
Indianapolis
Springfield
Richmond
St. Louis
Charleston
Virginia
Frankfort
Jefferson City
Illinois
Ecology
3. Insert or replace 2 AA batteries.
SNOOZE – Turn off the wake function
momentarily; turn off the sleep function
To turn on or off radio:
1. Press RADIO on the front of the
unit to turn on the radio.
) lights on
• The radio mode icon (
the display.
2. Press OFF to turn off the radio, or
press AUX or iPod to select another
sound mode.
• Any battery may present a risk of
fire, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.
• Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
• Battery shall not be exposed to
excessive heat such as sunshine, fire
or the like.
• If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
• Discard any leaky or deformed
battery immediately. They may
cause skin burns or other personal
injury.
• Please help to protect the
environment by recycling or
disposing of batteries according to
federal, state, and local regulations.
• Attention should be drawn to the
environmental aspects of battery
disposal.
CAUTION (For lithium battery)
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.
interrupted and you should readjust the
time and alarm settings.
SLEEP – Refer to “Sleep function”
Listening to the radio
Important battery
precautions
2. Apply thumb pressure to the tab
on battery door and then open the
door.
When the battery level of the 4 AA
batteries is low, the battery icon
will be flashing as an indication. At the
same time, the text “ ” and
” will be flashing alternatively for
“
a while. The Radio, iPod and AUX mode
cannot be accessed. Replace with new
batteries to resume opearation.
US time zones
openings.
• The ventilation should not be
impeded by covering the ventilation
openings with items such as
newspaper, table-cloths, curtains etc.
• Do not place lighted candles,
cigarettes, cigars, etc. on the
product.
• AC/DC adaptor is a disconnect
device. Plug AC/DC adaptor only to
AC power source as marked on the
AC/DC adaptor
• Care should be taken so that objects
do not fall into the product.
• Do not attempt to disassemble
the cabinet. This product does
not contain customer serviceable
components.
• The marking information is located
at the bottom of apparatus.
• Caution marking is located at
bottom of apparatus.
• The use of apparatus in moderate
climates.
General controls
Low Battery Level
Radio
San Francisco
•
or
/TUNE +/- – Search radio
frequencies; skip or search music file in
iPod/iPhone; adjust clock time, wake
time and snooze period
Clock
Sacramento
•
RECALL – Recall preset radio stations
OFF – Switch to Standby mode
Alaska
(AKST)
•
• ADDITIONAL SAFETY
INFORMATION
• In order to disconnect the apparatus
from the mains completely, the
mains plug should be disconnected
from the mains socket outlet
completely.
• To be completely disconnect the
power input, the AC/DC adaptor
of apparatus shall be disconnected
from the mains.
• The AC/DC adaptor should not be
obstructed OR should be easily
accessed during intended use.
• The AC/DC adapter supplied with
this product is intended to be
correctly oriented in a vertical or
floor mount position.
• Do not use unauthorized chargers
or power adapters. Use only
chargers that came with your
product or that is listed in the user’s
guide.
• Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases,
shall be placed on the apparatus.
• Always leave sufficient space around
the product for ventilation. Do
not place product in or on a bed,
rug, in a bookcase or cabinet that
may prevent air flow through vent
Battery Level
AM loop
antenna socket
Oregon
•
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
Before you begin
General controls
Back view
•
of the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The
]
wide blade or
the third prong
is provided for
your safety. If
the provided
Portable Cart Warning
plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
Only use attachments/accessories
specified by the manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during
lightning storms or when unused
for long periods of time.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
the radio:
turns on by default. If
RADIO and select a radio
usual.
To listen to the iPod/iPhone:
• Press iPod and then press << or >>
to select a file on the iPod/iPhone.
Playback will be in repeat all files
mode automatically.
• If iPod mode is selected in your last
sleep mode setting, the iPod/iPhone
will start to play, instead of the
radio.
• The radio will be played whenever
the iPod mode is selected but
without an iPod/iPhone connected.
To listen to the auxiliary player:
• If an auxiliary player (e.g. mp3
player) is connected, press AUX to
select AUX mode and start playback
on your auxiliary player.
To change or check the remaining
time in sleep mode:
• Press SLEEP once to check the
remaining sleep time. Press SLEEP
repeatedly to select another sleep
time.
To cancel the sleep mode:
• If you decide to turn off the unit
sooner, press SNOOZE, OFF or press
SLEEP repeatedly to select “OFF”.
To control the playback:
1. During playback, press iPod to
pause the playback and press again
to resume.
2. Press << or >> to skip to the
previous or next file.
• Press and hold << or >> to search
backward or forward.
3. Press SHUFFLE to play the files in
random order in the iPod/iPhone.
Press again to cancel the function
(shows on the iPod/iPhone display).
4. Press REPEAT to select a repeat
playback mode (repeat 1 or repeat
all). Press REPEAT until no repeat
mode is selected (shows on the
iPod/iPhone display) to cancel the
repeat playback.
To select auxiliary mode:
1. Connect your auxiliary source (e.g.
mp3 player) to the AUX input jack
at the back of the unit with an
audio cable (not supplied).
2. Press AUX to turn on the unit or to
switch to listen to AUX from other
modes.
• The auxiliary mode icon (
)
lights on the display.
• Adjust the auxiliary player to midrange volume and adjust the master
volume on the unit. Do not turn
the volume of the auxiliary player
too high as this may affect the
sound quality. For other playback
operations, control them on your
auxiliary player.
To charge the iPod/iPhone:
• You may charge the battery of your
iPod/iPhone through the universal
dock for iPod/iPhone while the unit
is turned off (standby mode) or in
the AUX, Radio (FM band only) or
iPod mode. Charging control should
be operated on the iPod/iPhone. It
is not necessary to charge in iPod
mode, unless you are listening to
the iPod/iPhone.
iPod/iPhone charging is not
available when operating by
batteries.
NAP function
Display brightness
For catnaps up to 2 hours without
disturbing the regular alarm settings,
the NAP function wakes you up after a
short period of time.
Press BRIGHTNESS repeatedly to adjust
the desired brightness level.
To set the NAP time:
1. Press NAP repeatedly to cycle
among the NAP time available
(10min, 20min, 30min, 60min,
90min, 120min and OFF. 20min is
the default setting. When you first
set the NAP time, the NAP time is
default to 10 min).
• The icon NAP flashes while
selecting.
2. When the desired NAP time is
selected, release NAP and wait for
about 5 seconds, the NAP time is
now set. The current time shows
and the icon NAP lights on the
display.
• Only alarm tone is available in the
NAP mode.
To check the remaining NAP time:
• Press NAP once to show briefly the
NAP time left.
To cancel the NAP function:
• Press and hold NAP or press NAP
repeatedly to select OFF.
To turn off the NAP alarm:
• Press NAP or OFF to stop the NAP
alarm.
Warranty information
Limited warranty
12 Month Limited Warranty
Applies to RCA Audio/Video
Products
AUDIOVOX ELECTRONICS CORP. (the
Company) warrants to the original retail
purchaser of this product that should
this product or any part thereof, under
normal use and conditions, be proven
defective in material or workmanship
within 12 months from the date of
original purchase, such defect(s) will be
repaired or replaced with reconditioned
product (at the Company’s option)
without charge for parts and repair
labor.
To obtain repair or replacement
within the terms of this Warranty, the
product is to be delivered with proof
of warranty coverage (e.g. dated bill
of sale), specification of defect(s),
transportation prepaid, to the Company
at the address shown below.
This Warranty does not extend to the
elimination of externally generated
static or noise, to correction of
antenna problems, loss/interruptions of
broadcast or internet service, to costs
incurred for installation, removal or
reinstallation of product, to corruptions
caused by computer viruses, spyware or
other malware, to loss of media, files,
data or content, or to damage to tapes,
discs, removable memory devices or
cards, speakers, accessories, computers,
computer peripherals, other media
players, home networks or vehicle
electrical systems.
This Warranty does not apply to any
product or part thereof which, in the
opinion of the Company, has suffered
or been damaged through alteration,
improper installation, mishandling,
misuse, neglect, accident, or by removal
or defacement of the factory serial
number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other
express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED
TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH
OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24
MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person or
representative is authorized to assume
for the Company any liability other than
expressed herein in connection with the
sale of this product.
Some states do not allow limitations on
how long an implied warranty lasts or
the exclusion or limitation of incidental
or consequential damage so the above
limitations or exclusions may not apply
to you. This Warranty gives you specific
legal rights and you may also have
other rights which vary from state to
state.
How to make a warranty claim:
• If your product is capable of storing
content (such as an mp3 player,
digital voice recorder, etc), it is
recommended to make periodic
backup copies of content stored
on the product. If applicable,
before shipping a product, make
a back up copy of content or data
stored on the device. Also, it is
advisable to remove any personal
content which you would not want
exposed to others. IT IS LIKELY
THAT CONTENTS AND DATA ON
THE DEVICE WILL BE LOST DURING
SERVICE AND REFORMATTING.
AUDIOVOX ACCEPTS NO LIABILITY
FOR LOST CONTENT OR DATA,
OR FOR THE SECURITY OF ANY
PERSONAL CONTENT OR DATA ON
THE RETURNED DEVICE. Product
will be returned with factory
default settings, and without any
pre-loaded content which may have
been installed in the originally
purchased products. Consumer will
be responsible for reloading data
and content. Consumer will be
responsible to restore any personal
preference settings.
• Properly pack your unit. Include
any remotes, memory cards, cables,
etc. which were originally provided
with the product. However DO NOT
return any removable batteries,
even if batteries were included
with the original purchase. We
recommend using the original
carton and packing materials.
• Include evidence of purchase date
such as the bill of sale. Also print
your name and address and a
description of the defect. Send via
standard UPS or its equivalent to:
covered by the warranty.
• A new or refurbished unit will be
shipped to you freight prepaid.
What we will do:
Provide you with a new, or at our
option, a refurbished unit. The
exchange unit is under warranty for
the remainder of the original product’s
warranty period.
For Canada Customers, please ship
to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-877-833-3491
• Insure your shipment for loss or
damage. Audiovox accepts no
liability in case of damage or loss en
route to Audiovox.
• Pay any charges billed to you by
the Exchange Center for service not
Audiovox Electronics Corp.
150 Marcus Blvd., Hauppauge, NY 11788
©2010 Audiovox Electronics Corp.
Trademark(s) ® Registered
Printed in China