RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 1
ENGLISH
RH399H/RH387H
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book
case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings
should be never be blocked by placing the product on a bed, sofa, rug or other
similar surface. This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to.
CAUTION:CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WEN OPEN AND INTERLOCKS
DEFEATED AVOID EXPOSER TO THE BEAM.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference. Should the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when open. DO NOT STARE INTO BEAM.
2
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue
use of the appliance, and have the cord replaced with an exact replacement
part by an authorized service center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance. To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure that the plug is easily
accessible.
IMPORTANT SAFETY NOTICE
The cord grip for the plug fitted to this product is built into the existing
power cord as supplied. If, for any reason you need to shorten the cord.
DO NOT RE-USE THE PLUG.
A new plug must be used to ensure your continued safety by securing the
plug to the power cord in accordance with Plug & Socket Regulations 1994.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 3
Copyrights
Recording equipment should be used only for lawful copying and you are
advised to check carefully what is lawful copying in the area in which you are
making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.
Open source software notice
This product includes
Freetype library : copyright © 2003 The FreeType Project (www.freetype.org).
Zlib compression library developed by Jean-loup Gailly and Mark Adler.
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
Doubly Linked List licensed by Artistic license.
You can download this software from http://freshmeat.net/projects/linklist/
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 625p HDD/DVD RECORDER,
PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
3
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 4
Contents
Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-12
Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . .12
Auto setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-14
Adjust the SETUP settings . . . . . . . . . . . . . . . . . . . . . . .14-18
Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . .18-19
Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-20
Playing DivX® movie files . . . . . . . . . . . . . . . . . . . . . . . . .21-22
Listening to a music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-27
Editing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-30
Dubbing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-34
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
4
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 5
Before you start
Recordable and Playable discs
This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.
Symbol used in
this manual
HDD
DVD-R
HDD
-R
Yes
No
–
Yes
DVD-RW
DVD-RAM
DVD+R
RAM
+R
+R
+RW
Yes
Yes
No
No
Yes
Video mode
Video mode
VR mode
Auto
Auto
Auto
Limited
Yes
Yes
Limited
Limited
Yes
-RWVR
-RWVideo
DVD+R(DL)
DVD+RW
Logos
Re-Writable
Formatting Mode
(new discs)
Editing
Play on other
players
Recommended
discs
–
The player must be compatible with corresponding media and the media has to be finalized.
Mitsubishi(8x,16x)
Verbatim(8x,16x)
–
Mitsubishi(4x)
Verbatim(4x)
JVC(4x)
Maxell(4x)
Mitsubishi(3x) Mitsubishi(8, 16x) Mitsubishi(2.4x, 8x) Mitsubishi(4x)
Maxell(5x)
Verbatim(8x,16x)
HP(4x)
Verbatim(4x)
Ricoh(4x)
Playable discs
The table below shows the file formats and media types that this unit can playback.
Symbol used in
this manual
DVD
Audio CD
DVD
ACD
Discs such as movies
that can be
purchased or rented.
Music CDs or CD-R/RWs
in music CD format that
can be purchased
Data disc (DivX, JPEG, MP3 or WMA)
DivX
JPEG
MP3
WMA
Logos
Characteristics
Discs that contain DivX, JPEG, MP3 or WMA
files.
5
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 6
Notes on discs
Restrictions on copying
Depending on the conditions of the recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Some video material is copy-once protected: Such material cannot be copied to
HDD or DVD. You can identify copy-once protected material during playback by
displaying disc information on-screen.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
NTSC format signals from the analog or the DV inputs is not recorded correctly with this unit.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing
so may result in malfunctions.
Video signals in SECAM format (from the built-in TV tuner or from the analog inputs) are recorded in PAL format.
Depending on the recording software & the finalization, some recorded discs
(CD-R/RW or DVD±R/RW) may not be playable.
About the
Symbol Display
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal
computer or a DVD or CD Recorder may not play if the disc is damaged or
dirty, or if there is dirt or condensation on the Unit’s lens.
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that specific media.
If you record a disc using a personal computer, even if it is recorded in a
compatible format, there are cases in which it may not play because of the
settings of the application software used to create the disc. (Check with the
software publisher for more detailed information.)
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labelled same as the rear of the unit or “ALL”.
This unit requires discs and recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions (see above) to ensure compatible
playback.
Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right to
grant such permission. Permission should always be sought from the copyright owner.
Availability of copying or moving feature
From
To
MP3/WMA
HDD
DISC
-
-
-
Yes
DISC
HDD
Yes
Yes
Yes
Yes
USB drive
HDD
Yes
Yes
Yes
-
*1 The title is recorded from this unit.
6
JPEG
DivX
Title*1
Regional Codes
Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code. Can’t play back” appears on the TV screen.
Remote Control Operation
Point the Remote Control at the remote sensor and press the buttons.
Remote Control Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert R03
(size AAA) battery with 3 and # matched correctly.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 7
Remote control
a
AV/INPUT: Changes the input source (Tuner, AV1-2, or
DV IN).
a
d
TIMESHIFT: Activates pause live TV/playback (timeshift) for
a live TV program.
POWER: Switches the unit ON or OFF.
CLEAR: Removes a track number on the Program List.
DVD: Selects the unit’s mode to DVD.
0-9 numerical buttons: Selects numbered options in a
menu.
): Selects an audio language or audio channel.
TITLE: Displays the disc’s Title menu, if available.
b
HOME: Accesses or removes the HOME menu.
TV Control Buttons: You can control the sound level, input
source, and power switch of your TV.
* : This button is not available.
Setting up the remote to control your TV
You can operate your TV with the supplied remote control.
If your TV is listed in the table below, set the appropriate
manufacturer code.
DISPLAY: Accesses On-Screen Display.
MENU/LIST: Accesses menu on a DVD disc. Switches
between Title List-Original and Title List-Playlist menu.
While holding down TV POWER button, and press the manufacturer code for your TV with the numerical buttons (see
the table below). Release the TV POWER button to complete setting.
b / B / v / V (left/right/up/down):
Used to navigate on-screen displays.
(ENTER): Acknowledges menu selection.
PR/CH (v/V): Scans up or down through memorized
channels.
Manufacturer
Code Number
LG / GoldStar
1 (Default), 2
RETURN (O): Removes the on-screen displays.
Zenith
REC(z): Starts recording. Press repeatedly to set the
recording time.
Samsung
6, 7
Sony
8, 9
MARKER: Selects multiple files/titles on the list.
d
OPEN/CLOSE: Opens and closes the disc tray.
AUDIO (
c
REPEAT: Repeat sequence, chapter, track, title, all.
HDD: Selects the unit’s mode to HDD.
b
c
Hitachi
PLAY (N): Starts playback.
STOP (x): Stops playback or recording.
PAUSE/STEP (X): Pause playback or recording temporarily.
1, 3, 4
4
Depending on your TV, some or all buttons may not function
on the TV, even after entering the correct manufacturer
code. When you replace the batteries of the remote, the
code number you have set may be reset to the default setting. Set the appropriate code number again.
SCAN (m / M): Search backward or forward.
SKIP (. / >): Go to next or previous chapter/track/file.
7
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 8
Main Unit
: Indicates when the unit is in timer recording or a timer recording is programmed.
: Indicates clock, total playing time, elapsed time, title number,
chapter/track number, channel, etc.
RH387H
a
b
c
d
e
fghij k
e Remote Sensor
Point the remote control here.
f N / X (PLAY / PAUSE)
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
l m
n
RH399H
a
b
j ck
d
e f ghi
g x (STOP)
Stops playback or recording.
h z (REC)
Starts recording. Press repeatedly to set the recording time.
i RESOLUTION
Sets the output resolution for HDMI and COMPONENT OUTPUT jacks.
- HDMI: 576i, 576p, 720p, 1080i, 1080p
- COMPONENT: 576i, 576p
l m
a 1 / I (POWER button)
Switches the unit ON or OFF.
b Disc Tray
Insert a disc here.
c OPEN/CLOSE (Z)
Opens or closes the disc tray.
d Display window
Shows the current status of the unit.
T/S: Indicates the timeshift mode.
REC: The unit is recording.
HDD: The unit is HDD mode.
DVD: The unit is DVD mode.
HDD b B DVD: The unit is dubbing.
8
n
j DVD
Set the recorder’s mode to DVD.
k HDD
Set the recorder’s mode to HDD.
l USB Port
Connect a USB Flash Memory.
m DV IN
Connect the DV output of a digital camcorder.
n AV IN 2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source (Audio system, TV/
Monitor, VCR, Camcorder, etc.).
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 9
Hooking up the unit
a Antenna connection
Connect the Terrestrial
TV antenna to the
ANTENNA IN jack on
the unit.
b Antenna connection to
your TV
Connect one end of the RF
cable to ANTENNA OUT jack
on the unit and other end to
ANTENNA IN jack on your
TV.
Passes the signal from the
ANTENNA IN jack to your
TV/monitor.
c Audio/Video connection
Connect one end of the
video(yellow) cable to the
VIDEO OUTPUT jack on the
unit and other end to the
VIDEO INPUT jack on your
TV.
Connect one end of the
audio cables (red and white)
to the analog AUDIO
OUTPUT jacks on the unit
and other ends to the AUDIO
INPUT jacks on your TV.
d Power cord connection
Connect the mains lead to
the AC IN terminal on the
unit. Then plug the power
cord into the mains.
9
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 10
Hooking up the unit - more you can do
Component connection
Connect one end of the component (Y PB PR) cables to the COMPONENT
OUTPUT jacks on the unit and other ends to the COMPONENT INPUT jacks on
your TV.
Connect one end of the audio cables (red and white) to the analog AUDIO
OUTPUT jacks on the unit and other ends to the AUDIO INPUT jacks on your
TV.
Digital audio connection
Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other
equipment with a digital input.
Connect one end of the digital audio cables (COAXIAL or OPTICAL) to the digital audio output jack (COAXIAL or OPTICAL) on the unit and other end to the
digital audio input jack (COAXIAL or OPTICAL) on your amplifier.
If your television is a high-definition or “digital ready” television, you may take
advantage of the unit’s progressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive Scan format, the picture
will appear scrambled with the progressive signal.
Set the resolution to 576p using RES. button on the front panel to obtain the
progressive signal.
S-Video connection
Connect one end of the S-Video cable to the S-VIDEO OUTPUT jack on the
unit and the other end to the S-VIDEO INPUT jack on your TV.
Connect one end of the audio cables (red and white) to the analog AUDIO
OUTPUT jacks on the unit and the other ends to the AUDIO INPUT jacks on
your TV.
10
This recorder does not perform internal (2 channel) decoding of a DTS sound
track . To enjoy DTS multi channel surround, you must connect this recorder to
a DTS compatible receiver via one of this recorder’s digital audio output.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 11
HDMI connection
If your TV is not equipped with DTS decoder, set the [DTS] options to
[OFF] on the setup menu (See page 16). To enjoy DTS multi channel
surround, you must connect this unit to a DTS compatible receiver via
one of this unit’s digital audio outputs.
If there is noise or lines on the screen, please check the HDMI cable.
Changing the resolution when the unit is connected with HDMI connector
may result in malfunctions. To solve the problem, turn off the unit and
then turn it on again.
When you connect a HDMI or DVI compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and this unit. Next, switch on
the HDMI/DVI device and leave it for around 30 seconds, then switch
on this unit.
Connect one end of the HDMI cable to the HDMI OUTPUT jack on the unit and
other end to the HDMI INPUT jack on your TV.
Recorder
TV
When you use the HDMI connection, you can change the resolution (576i,
576p, 720p,1080i or 1080p) for the HDMI output by pressing RES. button
repeatedly.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720(1440)x576i, 720x576p,
1280x720p, 1920x1080i or 1920x1080p video input.
About HDMI
HDMI (High Definition Multimedia Interface) supports both video and audio on a
single digital connection for use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of HDCP (High-bandwidth
Digital Contents Protection). HDCP is used to protect digital content transmitted
and received.
HDMI has the capability to support standard, enhanced, or high-definition video
plus standard to multi-channel surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one
connector (instead of several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
What is SIMPLINK?
Some functions of this unit are controlled by TV’s remote control when this
unit and LG TV with SIMPLINK are connected through HDMI connection.
•
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip,
Stop, Power Off, etc.
•
Refer to the TV owner’s manual for the details of SIMPLINK function.
•
LG TV with SIMPLINK function has the logo as shown above.
Note on HDMI connection
If your TV is NOT capable of handling 96 kHz sampling frequency, set
the [Sampling Freq.] option to [48 kHz] on the setup menu (See page
16). When this choice is made, this unit will automatically convert any 96
kHz signals to 48 kHz so your system can decode them.
If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See
page 16).
11
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 12
Connecting to the INPUT 1 or AV IN 2 Jacks
Operating USB Flash Drive
Connect the input jacks (INPUT1, AV IN 2) on the unit to the audio/video out
jacks on your accessory component using audio/video cables.
ON REMOTE
Jack panel of Accessory Component
(VCR, Camcorder, etc.)
AUDIO
OUTPUT
R
1. Insert an USB Flash Drive to the USB port:
–
2 Displays the HOME menu:
HOME
3 Select a main option:
bB
[MUSIC], [PHOTO] or [MOVIE] option
L
VIDEO
OUTPUT
4 Select the [USB] option:
vV
5 Displays corresponding menu list:
ENTER
For details of operations on each file, refer to
relevant pages.
Rear of
the recorder
Front of
the recorder
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to connect a DV digital
camcorder and digitally transfer DV tapes to DVD.
Using USB Flash Drive - more you can do
Using an USB Flash Drive
This unit can play the MP3/WMA/JPEG/DivX files contained in the USB Flash
Drive.
Inserting the USB Flash Drive – Insert straight-in until it fits into place.
Removing the USB Flash Drive – Withdraw the USB Flash Drive carefully
when the connected USB Flash Drive is in use.
Notes on USB Flash Drive
Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this unit.
The DV IN jack is for connection to DV digital camcorder only. It is not compatible with digital satellite tuners or D-VHS video decks. Disconnecting the DV
cable while recording a contents of the connected digital camcorder may result
in malfunction.
12
The contents on the disc or HDD cannot be moved or copied to a USB
Flash Drive.
Keep the USB Flash Drive out of reach of children. If swallowed, seek medical advice immediately.
This unit supports only USB Flash Drive with FAT16 or FAT32 format.
The USB Flash Drives which require additional software will not be
supported.
This unit is compatible with the Flash type USB device that supports USB
1.1.
This unit may not supports some USB Flash Drive.
Do not extract the USB Flash Drive in operating (play, copy, etc.).
It may cause a malfunction on this unit.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 13
Auto setup
When the first time to turn on the unit, the initial setup
wizard sets the language, clock and channels
automatically.
ON REMOTE
[Delete]: Delete the selected channel from programmed channel list.
[Move]: Change the order of the channels and which numerical button they
correspond to.
[Station Rename]: change the name of the selected channel.
[Program Edit]: Change the settings of a channel manually.
Editing a channel
1 Turn on the unit:
The initial setup wizard appears on the screen.
POWER
2 Choose a language:
vV
3 Select the chosen language:
ENTER
4 Check the antenna and go to the next step:
ENTER
5 Set the clock:
vVbB,
ENTER
6 Starts channel scan:
ENTER
7 Close the initial setup:
ENTER
Auto setup - more you can do
You can change the settings of programmed channel by selecting [Program
Edit] option on the left side of the channel editing screen.
[PR]: Indicates the selected channel position.
[Seek]: Searches for a channel automatically. Searching stops when the unit
tunes in a channel.
[Ch.] Changes the channel number.
[MFT] Fine tunes the channel to obtain a clearer picture.
[NICAM]: Sets the channels for the NICAM broadcast.
[OK]: Confirm the settings and return to the channel list menu.
Adjust the programmed channels
Press HOME, then use b B to select [Easy Menu] option. Press ENTER while
[SETUP] is selected. The SETUP menu appears on the screen. Select the
[Program Edit] on the second level options then press B to move to the third
level. Press ENTER while [Edit] option is selected. The channel editing screen
appears on the screen.
Select which channel you would like to edit and press ENTER. An option menu
on the left side of the screen will be highlighted.
Using the Home Menu
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select a main option:
bB
3 Select a sub option:
vV
4 Execute the selected option:
ENTER
5 Exit the HOME menu:
HOME
13
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 14
Using the Home Menu - more you can do
MOVIE
HDD – Displays the [Title List] menu, which shows recorded titles on HDD.
(page 27)
HDD DivX – Displays [Movie List] menu, which shows DivX® movie files on
HDD. (page 21)
DISC
– Displays [Title List] menu, which shows recorded titles on the disc. (page
27)
– Displays [Movie List] menu, which shows DivX® movie files on the disc.
(page 21)
– Plays DVD-Video disc (page 21).
USB – Displays [Movie List] menu, which shows DivX® movie files on the USB
Flash Drive. (page 22)
PHOTO
HDD – Displays [Photo List] menu, which shows photo files on HDD. (page 24)
DISC – Displays [Photo List] menu, which shows photo files on the disc. (page
24)
USB – Displays [Photo List] menu, which shows photo files on the USB Flash
Drive. (page 24)
MUSIC
TV
HDD – Returns to live TV viewing in HDD mode. Pressing the HDD button on
the remote control will also allow you to directly choose this option.
DVD – Returns to live TV viewing in DVD mode. Pressing the DVD button on
the remote control will also allow you to directly choose this option.
Timer Record – Displays [Timer Record] menu. (page 25)
Adjust the SETUP settings
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select the [Easy Menu] option:
bB
3 Select the [SETUP] option:
V, ENTER
4 Select a desired option on the first level:
vV
5 Move to second level:
B
6 Select a desired option on the second level:
vV
7 Move to third level:
B
8 Adjust or confirm the setting:
v V, ENTER
9 Go back to the previous level:
b
HDD – Displays [Music List] menu, which shows music files on HDD. (page 23)
DISC – Displays [Music List] menu, which shows music files or audio tracks on
the disc. (page 23)
USB – Displays [Music List] menu, which shows music files on the USB Flash
Drive. (page 23)
Easy Menu
SETUP – Displays SETUP menu. (page 14)
Rec Mode – Displays [Record Mode Set] option in the SETUP Menu. (page 17)
Dubbing – Dubs a currently playing title from a finalized DVD±R or a DVD-ROM
title without copy protection. (page 31)
First level
Second level
Third level
14
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 15
Adjust the SETUP settings - more you can do
Adjust the general settings
Initialization – You can reset the unit to its original factory settings
and format the HDD.
[Factory Set]: You can reset the unit to all its factory settings. Some options
cannot be reset (Rating, Password, and Area Code). The auto setup menu
appears on the screen after the factory settings.
[HDD format]: Everything recorded on the HDD will be erased.
Adjust the language settings
Auto Programming – This option automatically scans and sets the available
channels.
[Start]: Start the channel scanning.
Program Edit– This option allows you to add channels and edit preset
channels.
[Add Channel]: Press v V to select the channel and press ENTER to add the
selected channel.
[Edit]: Displays the screen which show preset channel list and channel
editing options. (page 13)
Clock Set– The clock must be set in order to use [Timer record].
TV Aspect – Selects the aspect ratio of the connected TV.
[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV
and prefer the wide picture with bands on the upper and lower portions of the
screen.
[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture on the entire screen. Cuts off the portions at the sides
that do not fit.
[16:9 Wide]: Select this when connecting to a wide-screen TV.
Display Menu – Select a language for the Setup menu and on-screen display.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list
on page 32. If you make a mistake while entering number, press CLEAR to
delete numbers.
[OFF] (for Disc Subtitle): Turn off Subtitle.
DivX Subtitle – Select a language code for the DivX® subtitle.
Power Save mode – Selects whether this unit is in power save mode when the
power is turned off. This option is not available when a timer recording is set.
[ON]: The front panel display is off and only signals arriving at the antenna
input are passed through when the unit is turned off.
[OFF]: Turns off the [Power Save Mode].
15
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 16
Adjust the audio settings
Adjust the lock settings
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITAL AUDIO OUTPUT jack.
To access the DVD Rating, Password or Area Code options, you must enter the
4-digit password. If you have not yet entered a password you are prompted to
do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake
while entering number, press CLEAR to delete numbers.
If you forget your password, you can reset it. Display the SETUP menu. Input
‘210499’ and press ENTER. The password has now been cleared.
[Bitstream] – Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an audio component with a built-in Dolby Digital, DTS or
MPEG decoder.
[PCM] (for Dolby Digital / MPEG) – Select this when you connect this unit’s
DIGITAL AUDIO OUTPUT jack to an audio component without a built-in
Dolby Digital or MPEG decoder.
[Off] (for DTS) – Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an audio component without a built-in DTS decoder.
Sample Freq. (Frequency) – Selects the sampling frequency of the audio
signal.
[48 kHz]: In case of DVD with 96KHz sampling, the output is converted to
48KHz. If your receiver or amplifier is NOT capable of handling 96KHz signal,
select [48KHz].
[96 kHz]: The audio signals are output in their original format.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is
effective for multi-channel karaoke DVDs only.
16
DVD Rating – Select a DVD rating level. The lower the level, the stricter the
rating. Select [No Limit] to deactivate the rating.
Password – Changes or deletes the password.
[Change]: Enter the new password twice after entering the current password.
[Delete]: Delete the current password after entering the current password.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. See the Area Codes on page 32.
DivX Reg. Code– We provide you with the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase videos using the DivX®
VOD service. For more information, visit www.divx.com/vod.
Press ENTER when [View] icon is highlighted and you can view the registration
code of the unit.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 17
Adjust the recording settings
Time Shift – Setting this option to [ON] activates the Time Shift function
automatically without pressing TIMESHIFT button. The timeshift will start in
5 seconds after TV tuner mode is started.
Adjust the disc settings
Record Mode Set – Select the picture quality for recording from XP, SP, LP, EP
or MLP. See recording time of each mode on page 35.
[XP]: Highest picture quality.
[SP]: Standard picture quality.
[LP]: Slightly lower picture quality than [SP] mode.
[EP]: Low picture quality.
[MLP]: The longest recording time with the lowest picture quality.
Disc Format – You can Initialize a DVD by pressing ENTER while [Start] is
selected. The [Disc Format] menu appears. The unit starts formatting after
confirmation. You can select a mode between VR and Video for DVD-RW discs.
Everything recorded on the DVD will be erased after formatting.
Record Aspect – This option sets the recording aspect ratio to suit the material
you are recording on DVD.
If you load a completely blank disc, the unit will initialize the disc automatically.
See “Formatting mode (new disc)” on page 5 for more information.
DV Record Audio – You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN jack.
To create an NTSC formatted DVD disc, press AV/INPUT repeatedly to select
an external NTSC input (AV1-2, or DV). Set [Disc Rec Mode] option to [NTSC]
on the setup menu with a recordable DVD disc loaded. And format a loaded
disc using [Disc Format] option in the setup menu.
Some digital camcorders have two stereo tracks for audio. One is recorded at
the time of shooting; the other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
TV Record Audio – Select an audio channel to record when recording a bilingual program.
[Main+Sub]: Main language and sub language
[Main]: Main language only
[Sub]: Sub language only
Auto Chapter – When DVD recording, chapter markers are added
automatically in every specified interval (5, 10 or 15 min.).
Disc Record Mode – When recording a signal from analog or the DV input, you
can choose a color system (NTSC or PAL). Normally set to [PAL] because this
recorder’s color system is PAL. Set this option to [NTSC] to view or record
NTSC signals from external inputs (AV1-2 or DV).
17
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 18
Finalize – Finalizing is necessary before you can play a disc recorded with this
unit on other DVD equipment. How long finalization takes depends on the disc
condition, recorded length and number of titles.
[Finalize]: The [Finalize] menu appears. The unit starts finalizing after
confirmation.
[Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming
on the [Unfinalize] menu. After unfinalizing, the disc can be edited and rerecord.
Before finalizing, check the characteristics between the disc type in the table
below.
The finalized DVD-RW discs can be unfinalized
so that the disc can edit or record again.
-RW
+R
-R
Once you finalize a disc, you can not edit or
record anything on the disc.
+RW
Discs are automatically finalized when removed from
the unit.
RAM
Finalization is not needed.
Displaying disc information
ON REMOTE
1 Play the disc loaded on the unit:
PLAY
2 Displays current status of playback:
DISPLAY
3 Displays the playback menu:
DISPLAY
4 Select an item:
vV
5 Adjust the playback menu settings:
bB
6 Exit the disc playback menu:
DISPLAY
Displaying disc Information - more you can do
Adjusting playback menu item
You can select an item by pressing vV and change or select the setting by
pressing b B.
Disc Label – This function allows you to change the default disc name to
something more descriptive. This name appears when you load a disc and
when you display disc information on-screen. The keyboard menu appears by
pressing ENTER while [Edit] is selected.
a
b
c
d
e
f
g
Disc Protect – This function allows you to protect discs from accidental
recording, erasure and editing by setting this option to [ON]. The DVD-R and
Video mode formatted DVD-RW are not available to protect.
PBC (Playback control) – Playback control provides special navigation
features that are available on some discs. Select [On] to use this feature.
a
b
c
d
e
f
g
18
Current title/track/file / Total number of titles/tracks/files
Current chapter / total number of chapters
Elapsed playing time
Selected audio language or audio channel
Selected subtitle
Selected angle / Total number of angles
Selected sound mode
RH387H-W_BHKGLLX-ENG
7/13/11
Moving to another title HDD
10:27 AM
Page 19
Displaying information while watching TV
DVD ALL
When a disc has more than one title, you can move to another title.
Press DISPLAY twice during playback then use v / V to select the title icon.
Then, press the appropriate numbered button (0-9) or b / B to select a title
number.
Starting playback from selected time HDD
DVD ALL
During viewing the TV, Press DISPLAY to display the information displayed
on-screen.
a
b
c
DivX
Press DISPLAY twice during playback. The time search box shows the elapsed
playing time. Select the time search box and then input the required start time
in hours, minutes, and seconds from left to right. For example, to find a scene
at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press ENTER.
If you enter the wrong numbers, press b / B to move the under bar (_) to the
wrong number. Then enter the correct numbers.
Selecting a subtitle language DVD
DivX
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the subtitle option then use b B to select desired subtitle language.
Watching from a different angle DVD
If the disc contains scenes recorded at different camera angles, you can change
to a different camera angle during playback.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the angle option then use b B to select desired angle.
Selecting a sound mode DVD ALL
d
a Indicates channel number, station name, and audio signal
(Stereo, Bilingual, Mono) received by the tuner.
b Indicates media name and format.
c Indicates the record mode, free space, and elapsed time progress bar.
d Indicates current date and time.
Play a disc
DivX
This unit can produce a 3D Surround effect, which simulates multi-channel
audio playback from two conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-channel audio from a home
theater system.
During playback, press DISPLAY twice to display the playback menu. Use v V
to select the sound option then use b B to select desired sound mode
(3D SUR. or NORMAL).
ON REMOTE
1 Open the disc tray:
Z)
OPEN/CLOSE (Z
2 Insert a disc:
-
3 Close the disc tray:
Z)
OPEN/CLOSE (Z
4 Adjust the disc menu settings:
A disc menu may not appears on the screen
depending on the disc.
v V b B, ENTER
5 Starts playback:
N)
PLAY (N
6 Stops playback:
x)
STOP (x
19
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 20
Play a disc - more you can do
Slow down the playing speed HDD
Playing a disc that contains a menu DVD
While playback is paused, press SCAN(bb or BB) to slow down forward or
reverse playback. You can change the various playback speeds by pressing
SCAN (m or M) repeatedly. Press PLAY ( N)to continue play at normal
speed.
The menu screen may be displayed first after loading a DVD which contains a
menu.
Use the b / B / v / V buttons to select the title/chapter you want to view, then
press ENTER to start playback. Press TITLE or MENU/LIST to return to the
menu screen.
Skip to the next/previous chapter/track/file
HDD
DVD ALL
ACD
MP3
WMA
DivX
Press SKIP (>) to move to the next chapter/track/file.
Press SKIP (.) to return to the beginning of the current chapter/track/file.
Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
Pause a playback
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue
playback.
Frame-by-Frame playback HDD
DVD ALL
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
You can advance or back up the picture frame-by-frame by pressing b / B
repeatedly during PAUSE mode.
Fast forward or fast reverse HDD
DVD ALL
ACD
DivX
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the various playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY ( N) to continue play at normal speed.
Hearing a different audio HDD
DVD ALL
DivX
Press AUDIO then press b or B repeatedly to hear a different audio language,
audio track or encoding method.
20
DVD ALL
Viewing the Title menu DVD
Press TITLE to display the title menu or disc menu. If the current DVD title has
a menu, the title menu appears on the screen. Otherwise, the disc menu may
not appear.
Playing repeatedly HDD
DVD ALL
ACD
MP3
WMA
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter, folder or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [OFF].
Repeating a specific portion (A-B) HDD
DVD ALL
ACD
Press REPEAT to select [A-] at the beginning of the portion you wish to repeat
and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds.
To return to normal playback, press REPEAT repeatedly to select [OFF].
Last Scene Memory DVD
This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch off the
unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 21
Divx file requirement
Playing DivX® movie files
ON REMOTE
1 Displays the HOME menu:
HOME
2 Selects a [MOVIE] option:
bB
3 Selects an option that contains DivX file:
v V, ENTER
4 Selects a movie file from the menu:
vV
5 Plays the selected movie file:
PLAY
6 Stops the playback:
STOP
Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”, “.sub (Micro DVD format only)”,
“.txt (Micro DVD format only)”
Playable Codec format: “DIV3”, “MP43”, “DIVX”, “DX50”
Playable Audio format: “AC3”, “PCM”, “MP2”, “MP3”, “WMA”
Sampling frequency: within 8-48 kHz (MP3), within 32-48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Playing a DivX® movie files - more you can do
Notes on DivX format
Movie List menu options
Select which file you would like to show from the menu and press ENTER. An
options menu appears on the left side of the screen.
The DivX subtitle file name has to be identified with the DivX file name to be
display on the unit.
If the subtitle file does not display properly, change the language code in the
[DivX Subtitle] option. (page 15)
If the number of the screen frames is over 29.97 frames per second, this
unit may not operate normally.
If the video and audio structure of DivX file is not interleaved, the unit
returns to the menu screen.
If there is an impossible code to express in the DivX file name, it may be
displayed as a “_” mark.
If the bitrate of a DivX file on the USB is over 4Mbps, the file may not be
played properly.
[Play]: Starts playback of the selected file.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) of folder (s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
Displaying movie file information
Press DISPLAY to show file information on the highlighted file in the movie list.
21
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 22
Selecting multiple files or folders on the list
Copying file(s) or folder(s) to the HDD
You can select not only a single file but also multiple files using the MARKER
button. Press MARKER at the desired files to select multiple files.
You can copy file(s) or folder(s) to the HDD.
Selecting all files and folders on the current list
If you want to select all files and folders on the list, press CLEAR at any file or
folder on the list. Press CLEAR again to deselect files and folders.
This function is not available for Audio CD.
Naming a file or folder on the HDD
You can name a file or folder on the HDD. The length of a name can be up to
32 characters long.
Select file(s) or folder(s) you would like to copy then press ENTER. Select [Edit]
option then press ENTER to show sub options. The [Copy] menu appears by
pressing ENTER while [Copy] option is selected. Select a directory that you
would like to copy to. Select the [Copy] option then press ENTER to begin
copying.
Moving file(s) or folder(s) to an other folder on the HDD
You can move file(s) or folder(s) to an other folder on the HDD.
Select a file or folder you would like to rename then press ENTER. Select [Edit]
option then press ENTER to show sub options. The keyboard menu appears by
pressing ENTER while [Rename] option is selected.
Select file(s) or folder(s) you would like to move then press ENTER. Select
[Edit] option then press ENTER to show sub options. The [Move] menu appears
by pressing ENTER while [Move] option is selected. Select a directory that you
would like to move to. Select the [Move] option then press ENTER to begin
moving.
22
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 23
Displaying MP3/WMA file information
Listening to music
ON REMOTE
1 Displays the HOME menu:
HOME
2 Select a [MUSIC] option:
bB
3 Selects an option that contains music:
v V, ENTER
4 Selects a music from the menu:
vV
5 Plays the selected music:
PLAY
6 Stops the playback:
STOP
Press DISPLAY while the file you want to show the file information for is
selected. The unit shows the ID3-Tag information of the file. If the file does not
have ID3-Tag information, [ID3-Tag: None] appears on the screen.
MP3/WMA audio file requirement
File extensions: “.mp3”, “.wma”.
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Listening to music - more you can do
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Music List menu options
Creating your own program
Select which file/track you would like to show from the menu and press ENTER.
A menu appears on the left side of the screen.
You can play the contents in the order you want by arranging the order of the
music files. The program is cleared when exiting the [Music List] screen.
To add or erase music on the program list, press MENU/LIST to display the
[Program List].
Select a desired music file from the [Music List] then press ENTER. If you want
to select multiple files/tracks, press MARKER at the every desired file/track.
Select the [Program Add] option then press ENTER to add the selected
file/track to the [Program List]. Select a music file from the [Program List] then
press PLAY to start programmed playback.
Erasing tracks/files from Program List
Audio CD
MP3/WMA
[Play]: Starts playback of the selected file/track.
[Random]: Starts or stops random playback.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) or folder(s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
[Program Add]: Adds a file(s)/track(s) to [Program List].
[Save]: Saves a [Program List] that you have arranged in the HDD.
[Load]: Loads a saved [Program List] in the HDD.
To delete a music file from the program list, select the music file you want to
delete then press ENTER. An option menu appear on the left side of the screen.
Select the [Delete] option then press ENTER to erase the music file from the
list.
Save your Program List (HDD only)
This unit memorizes the [Program List] that you have programmed. Select a file
on the [Program List] then press ENTER. Select the [Save] option then press
ENTER to save the [Program List].
23
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 24
Rotate a photo
Viewing a photo
Use vV to rotate the photo while displayed in full screen mode.
ON REMOTE
1 Displays the HOME menu:
HOME
2 Selects a [PHOTO] option:
bB
3 Selects an option that contains photo file:
v V, ENTER
4 Selects a photo from the list:
vVbB
5 Displays the selected photo in full screen:
PLAY
6 Returns to the Photo List:
STOP
Viewing photo files as a slide show
To view photos as a slide show, in the [Photo list] select the [Slide Show] option
on the left side of the screen then press ENTER, The [Slide Show] menu
appears on the screen. Set the [Object] and [Speed] options then press ENTER
while [Start] option is selected. The unit starts slide show as you selected on
the menu.
[Object] option:
[Selected] Views slide show of only selected files.
Use the MARKER button to select multiple files.
[All] Views slide show of all files.
[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or [Fast].
Viewing a photo - more you can do
Photo List menu options
Listening to music during slide show
Select which file you would like to show from the menu and press ENTER.
A menu appears on the left side of the screen.
You can view photos as a slide show while listening to MP3/WMA music files on
HDD. Press ENTER while [Simultaneous Music play] option is selected on the
[Slide Show] menu. The music file selection menu appears on the screen.
Press MARKER at the desired files to play then press ENTER while [Start]
option is selected. The unit starts slide show with music playing.
[Select All]: Select all files in current directory.
[Deselect All]: Deselect all files.
Pause a slide show
Press PAUSE/STEP to pause a slide show. Press PLAY to continue the slide
show.
[Full Screen]: Shows the selected file in full screen.
[Open]: Opens the folder and a list of files in the folder appears.
[Delete]: Deletes the file(s) or folder(s) from the hard disk drive.
[Rename]: Edits the file name in the HDD.
[Move]: Moves selected file(s) to another folder in the HDD.
[Copy]: Copies a file(s) to another folder in the HDD.
[Slide Show]: Displays the [Slide Show] menu.
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo while displayed in full
screen mode.
24
Photo file requirement
File extension: “.jpg”
Photo size: Less than 4MB recommended
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number of files and folders)
Notes on JPEG file
Progressive and lossless compression JPEG image files are not supported.
Depending on the size and number of the JPEG files, it may take several
minutes to read the contents of the media.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 25
Setting a timer record
Recording
Follow the instruction below to record a TV channel or
other source. The recording continues until the media
is full, you stop the recording or the progress of
recording is more than 12 hours.
This unit can be programmed to record up to 16 timer recordings within a
month. The clock must be set correctly before setting a timer recording.
ON REMOTE
1 Selects a recording mode:
You can select a recording mode on the
SETUP menu. (XP, SP, LP, EP or MLP)
HOME,
v V b B,
ENTER
2 Selects a recording media:
HDD or DVD
3 Selects a channel or source you want to record: PR/CH, AV/INPUT
4 Starts recording:
REC
5 Stops recording:
STOP
Recording - more you can do
Changing TV audio channel
Before recording, you can change the TV audio channel for stereo and bilingual
broadcast. Press AUDIO repeatedly to change the audio channel. The current
audio channel is displayed on-screen. Set the [TV Rec Audio] option in the
SETUP menu when recoding a bilingual broadcast.
Press HOME and select TV option. Press v V to select the [Timer Record] and
press ENTER to display [Timer record List] menu. Use v V to select [New] and
press ENTER to display [Timer Record] menu. Adjust each field as described
below using v V b B.
[Media]: Choose a media to record to (HDD or DVD).
[PR]: Choose a memorized program number, or one of the external inputs
from which to record. (You cannot select DV input.)
[Date]: Choose a date up to 1 month in advance.
[Start Time]: Set the start time.
[End Time]: Set the end time.
[Repeat] Choose a desired repeat (Once, Daily (Mon-Fri), or Weekly).
Press REC repeatedly to set the recording mode (XP, SP, LP, EP or MLP) then
press ENTER to set a timer recording. The “Rec OK” or “OK” on the [Check]
field on the [Timer Record List] menu indicates the timer recording is
programmed correctly.
Instant timer recording
Instant timer recording allows you to make a recording of preset length easily.
When the REC is first pressed, recording starts. Press REC repeatedly to select
a certain amount of time. Each press of REC displays the increased recording
time on-screen. You can set the instant timer recording up to 240 minutes on
HDD or up to 720 minutes on DVD, depending on the free space available.
25
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 26
Cancelling a timer recording
Time Slip
You can cancel a timer recording before the timer recording actually starts.
Select a timer recording that you want to cancel on the [Timer Record List]
menu and press CLEAR.
You can watch the title that you are currently recording to HDD with this function. After the recording is progressed over 15 seconds, press PLAY to playback
the title that you are currently recording. If you stop playback the title, returns to
the current recording position.
Timer Recording Troubleshooting
Even though the timer is set, the unit will not record when:
– There is no disc loaded and there is not free space on the HDD.
– A non-recordable disc is loaded and there is not free space on the HDD.
– [Disc Protect] option is set to [ON] in the Setup menu and there is not free
space on the HDD (see page 18).
– The unit is in operating (recording, copying, deleting etc.).
– There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R,
DVD+RW) recorded on the disc and there are already 255 titles recorded
on the HDD.
You cannot enter a timer program when:
– A recording is already underway.
– The time you’re trying to set has already passed.
– There are already 16 timer programs set.
If two or more timer programs overlap:
– The earlier program takes priority.
– When the earlier program finishes, the later program starts.
– If two programs are set to start at exactly the same time, the program
entered first takes priority.
Simultaneous playback and record
You can play other contents while you are recording. Simply press HOME and
select the playable contents you want to play while recording. You cannot
playback other contents while copying or dubbing. The DivX file cannot be
played while recording. When you are recording on a DVD, other contents on
the DVD cannot be played.
26
Record from a camcorder
You can record from a DV-equipped camcorder to the HDD by connecting it
with a DV cable. You can also record from a digital camcorder connected to the
DV in jack on the front of the unit. Press AV/INPUT repeatedly to select the DV
input. Find the place on the camcorder recording that you want to begin recording from and press REC to start recording. Depending on your camcorder, you
can use this recorder’s remote to control the camcorder using the STOP, PLAY
and PAUSE functions. Press STOP to end recording.
Recording From an external input
You can record from an external component, such as a camcorder or VCR,
connected to any of the recorder’s external inputs.
Each press of the AV/INPUT changes the input source as described below.
Make sure that the component you want to record from is connected properly to
the unit before recording an external source.
Tuner: Built-in tuner
AV1: INPUT 1 (VIDEO, AUDIO (L/R)) mounted on the rear panel
AV2: AV IN 2 (VIDEO, AUDIO (L/R)) mounted on the front panel
DV: DV IN mounted on front panel
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 27
Using time shift function
This feature allow you to pause or rewind live TV, so you do not miss a thing if
you were interrupted.
Press TIMESHIFT then press PAUSE/STEP while watching live broadcast. The
timeshift function will record the broadcast for later viewing. Before using this
function, make sure that the unit is in HDD mode.
If no button is pressed for 6 hours, the timeshift will stop automatically. You can
use trick play functions (slow, scan, etc.) during timeshift. Refer to playback
operation on page 20.
Stop timeshift by pressing STOP and confirm by pressing ENTER. You will be
returned to watch a broadcast in real time.
Jump to start or end during timeshift
Press ENTER to show progress bar during timeshift. Press b to jump to the
beginning and B to jump to the end of the timeshift recording.
Clip recording
If you want to record a timeshifted program as a title, press REC at the starting
point and ending point you want to record. The timeshift progress bar indicates
a clip that you select with red bar. You can make more clips by repeating this
instruction. The clips will be recorded when you exit the timeshift function.
Using time shift function automatically
If the [Time Shift] option in the SETUP menu is set to [ON], timeshift starts
automatically without pressing TIMESHIFT button in HDD mode.
If you want to quit timeshift function, set the [Time Shift] function to [OFF].
Editing a title
Using the Title list menu,you can edit video contents.
1 Selects a recording media:
HDD or DVD
2 Displays a [Title List] menu:
MENU/LIST
3 Selects a title you want to edit:
vVbB
4 Displays an editing menu:
ENTER
The options are differ depending on the media type.
5 Selects a menu option:
v V b B, ENTER
6 Exit the [Title List] menu:
RETURN
Editing a title - more you can do
About title list menu
Press MENU/LIST to display the Title List menu. Playback should be stopped
when you do this. You can also access it using HOME menu, select [MOVIE]
option then select [HDD] or [DISC] option and press ENTER. If you are editing
a VR mode disc, press MENU/LIST to switch between Original and Playlist
menu.
a
b
Load a recordable DVD disc formatted in NTSC. Set [Disc Record Mode] option
to [NTSC] on the setup menu (see page 17). Press DVD button and press
AV/INPUT repeatedly to select an external NTSC input (AV1-2 or DV). Press
REC to start recording and press STOP to stop recording.
You cannot record the NTSC signal on the DVD disc formatted in PAL.
You cannot use the dubbing, copying, or DVD editing function while a DVD disc
formatted in NTSC is inserted or while viewing an NTSC format signals from the
analog or the DV inputs. You cannot record the NTSC signal on the HDD.
d
e
f
Recording the NTSC format signals (DVD only)
You can record a NTSC format signal from the analog or the DV inputs to a
recordable DVD disc.
ON REMOTE
c
a Current media
b Indicates the record mode, free space, and elapsed time progress bar.
c Menu options: To display menu option, select a title or chapter then press
ENTER. The options displayed differ depending on the disc type.
d Currently selected title.
e Thumbnail
f Shows the title name, recorded date, and recording length.
27
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 28
Before editing
Chapter search HDD
This unit offers various edit options for various disc types. Before you edit,
check the disc type, and select the option available for your disc.
You can select the start of a title by searching a chapter. Select a title that you
want to search and press ENTER. Select [Chapter] in the [Search] option from
the menu on the left of the screen, and press ENTER to display the [Chapter
List] menu.
You can enjoy advanced edit functions with VR mode formatted DVD (DVD-RW
or DVD-RAM). Editing either the original recording(called the “Original”), or the
playback information created from the original (called a “Playlist”).
Edits made to the original titles are final. If you plan to edit a title without editing
the original title, you can create a Playlist title for editing.
A Playlist is a group of Playlist titles created from the original title for editing
purposes.
Titles in the disc’s original content contain one or more chapters. When you
insert a disc’s title into the Playlist, all the chapters within that title also appear.
In other words, chapters in the Playlist behave exactly as chapters on a DVDVideo disc do. Parts are sections of Original or Playlist titles. From the Original
and Playlist menu you can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie., chapter) of an Original
title. Deleting a part removes part of a title from the Original or Playlist menu.
Adding chapter markers HDD
-RWVR
+RW
+R
-RWVR
-RWVideo
+RW
+R
-R
RAM
Use v V b B to find the chapter you want to start playback, and press PLAY to
start playback.
Making a new PlayList -RWVR
RAM
The PlayList allows you to edit or re-edit a title or chapter without changing the
Original recordings. Use this function to add an Original title or chapter to a new
PlayList or the registered Playlist.
RAM
You can create chapters within a title by inserting chapter marks at the desired
point. Press MARKER at the desired point while playback or recording.
A chapter marker icon appears on the screen.
The chapter markers can be added at regular intervals automatically by setting
the [Auto Chapter] option in the SETUP menu.
Deleting a title or chapter
When you delete a title or chapter from the PlayList, the title or chapter in the
Original still remains. However, if you delete a chapter or title from Original, the
title or chapter deleted from the Original are also removed from PlayList.
Select a title or chapter that you want to delete and press ENTER. Select
[Delete] option from the menu on the left of the screen and press ENTER to
confirm.
HDD – You can delete multiple files using MARKER button. Press MARKER at
the desired files to select multiple files and then follow the instructions above.
28
Select an Original title or chapter that you want to put into the PlayList then
press ENTER. Select the [Playlist Add] option and then press ENTER to display
the [Select PlayList] menu. Choose a PlayList-title that you want to put the
selected Original title or chapter in, or select the [New PlayList] to create a new
PlayList.
Moving a PlayList chapter -RWVR
RAM
Use this function to re-arrange the playing order of a PlayList title on the
[Chapter List-Playlist] menu. Select [Move] option from the menu on the left of
the [Chapter List-Playlist] screen and press ENTER. Use v V b B to choose
the place you want to move the chapter to then press ENTER. The updated
menu is displayed
RH387H-W_BHKGLLX-ENG
Time search HDD
7/13/11
-RWVR
10:27 AM
-RWVideo
+RW
Page 29
+R
-R
RAM
You can select the start of a title by searching through the time duration. Select
a title that you want to search and press ENTER. Select [Time] in the [Search]
option from the menu on the left of the screen and press ENTER to display the
[Search] menu.
Dividing a title HDD
+RW
Use this function to split a title up into two titles. Select a title that you want to
divide and press ENTER. Select [Divide] in the [Edit] option from the menu on
the left of the screen and press ENTER to display the [Divide] menu. Find the
point you want to divide a title using PLAY, SCAN, PAUSE/STEP buttons and
press ENTER while [Divide] option is selected. The playback screen shows the
divided point. Select [Done] option and press ENTER to divide. You cannot
select dividing point less than 3 seconds.
Protect a title -RWVR
+RW
+R
RAM
Use this function to protect a title against accidental recording, editing or deleting. Select a title you want to protect and press ENTER. Select [Protect] option
from the menu on the left and press ENTER. The lock mark will appears on the
title thumbnail.
Use b B to find the time you want to start. Each press of b B to moves 1
minute and press and hold b B to moves 5 minutes. Press ENTER to watch a
title from a selected time.
Deleting a part HDD
Sorting the titles HDD
Press ENTER to bring up the options menu. Select [Sort] option and press
ENTER to view the further options. Here you can choose to sort titles according
to [Date] (when they were recorded), [Title] (alphabetical order) or by [Category]
(sort by genre).
Combining titles HDD
Use this function to merge the selected title with another title. Select a title and
press ENTER. Select [Combine] in the [Edit] option then press ENTER. Select
a title you want to combine with current title and press ENTER to confirm.
Hiding a chapter or title +RW
If you want to unprotect the title, select the protected title and press ENTER.
Select [Unprotect] option from the menu on the left and press ENTER to unprotect it.
+R
You can skip through playing chapters or titles without actually deleting them.
Select a chapter or title you want to hide and press ENTER. Select [Hide] in the
[Edit] option then press ENTER.
-RWVR
RAM
You can delete a part which you do not want in the title.
Select a title that you want to delete part of and press ENTER. Select [Delete
Part] in the [Edit] option from the menu on the left of the screen and press
ENTER to display the [Delete part] menu. You can find the point using PLAY,
SCAN, PAUSE/STEP buttons.
[Start Point]: Select starting point of a part that you want to delete then press
ENTER.
[End Point]: Select ending point of a part that you want to delete then press
ENTER.
[Next Part]: Press ENTER to delete an additional part (HDD only).
[Cancel]: Press ENTER to cancel the selected part.
[Done]: Press ENTER to delete the selected part.
If you want to recover the hidden title or chapter, select the hidden title or chapter and press ENTER. Select [Show] in the [Edit] option then press ENTER to
recover it.
29
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 30
Naming a title
When a title is recorded by this unit, the title name will be named by a number.
You can change a title name by using this function.
The chapters that you want to combine are created by deleting a part from
an Original title.
The chapters that you want to combine are created from different titles.
One of the playlist chapters that you want to combine has been moved.
Using the Disc menu
Using the title list menu in DVD mode, you can use the disc setting functions
without entering the SETUP menu.
Select a title that you want to change the name of and press ENTER. Select
[Rename] or [Title Name] option from the menu on the left of the screen and
press ENTER to display the keyboard menu. Use v V b B to select a character
then press ENTER to confirm your selection on the keyboard menu.
[OK]: Finish the naming.
[Cancel]: Cancels all entered characters.
[Space]: Inserts a space at the cursor position.
[Delete]: Deletes the previous character at the cursor position.
You can use remote control buttons for entering a name
PLAY (N): Inserts a space at the cursor position.
X (PAUSE/STEP): Deletes the character after the cursor position.
x (STOP), CLEAR: Deletes the character before the cursor position.
. / >: Moves cursor to left or right.
MENU/LIST, DISPLAY: Changes the character set on the keyboard menu.
Numbers (0-9): Enters the corresponding character at the cursor position.
You can apply a genre for a selected title on HDD. When a character is highlighted on the keyboard menu, keep pressing b until the curser jumps across to
the Genre field. Choose desired genre and press ENTER to select it.
The chosen genre name will appear at the lower right corner of the title thumbnail.
Combining chapters HDD
-RWVR
+RW
+R
RAM
Use this function to merge the selected chapter with adjacent chapter. Select a
chapter and press ENTER. Select [Combine] option to view combine indicator
between chapter thumbnails. Press ENTER to combine indicated two chapters.
This function is not available in conditions as listed below.
There is only one chapter within the title.
The first chapter is selected.
30
Use v V b B to select the [Disc] option on the DVD title list menu and then
press ENTER to show further options.
[Disc Format]: Format the inserted disc. (page 17)
[Finalize]: Finalize the inserted disc. (page 17)
[Unfinalize]: Unfinalize the inserted disc. (page 17)
[Disc Label]: Use this to enter a name for the disc. This name appears when
you load the disc and disc information on-screen. (page 18)
[Protect]: Use this to prevent accidental recording, editing, deleting of the
inserted disc. (page 18)
[Unprotect]: Release the protect function.
Overwriting +RW
You can overwrite a new video recording on a recorded title that is not protected. Select the TV channel or input source you want to record. Press
MENU/LIST to display the Title List menu. Use v V b B to highlights a title you
want to overwrite and then press REC to start overwrite. To stop the recording,
press STOP.
If you overwrite a longer recording than the current title on the fully recorded
disc, the next title is overwritten. If the next title is protected, the overwriting
stops at the starting point of the title.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 31
About ‘Fast’ copying
Dubbing a title
Using the title list menu, you can dub video contents.
ON REMOTE
1 Selects a recording media:
HDD or DVD
2 Displays a [Title List] menu:
MENU/LIST
3 Selects a title you want to dub:
vVbB
4 Displays an editing menu:
ENTER
5 Selects the [Dubbing] option:
vV
6 Displays the [Dubbing] menu:
ENTER
7 Sets the [Rec mode] option:
XP, SP, LP, EP, MLP, AUTO or Fast modes
vVbB
8 Highlights the [Start] icon:
vV
9 Starts dubbing:
ENTER
Copying between DVD and HDD is a completely digital process and therefore
involves no loss of quality in the audio or video. This allows high speed copying
for ease and convenience.
When copying from HDD to DVD, the speed of copying depends on the
recording mode and the kind of DVD disc you’re using. The Fast copying is
available for unedited original video titles, and may not be possible when using
disc initialized on another recorder.
When you dub a title from the HDD to VR mode DVD-RW or DVD-RAM, the
[Fast] mode is not available for edited HDD title and Clip Recording title. Only
available when copying VR mode disc to HDD. If dubbing an edited title from
VR mode DVD-RW or DVD-RAM to HDD you also cannot use [Fast] mode.
Dub multiple titles from HDD to DVD HDD
You can select not only a single title but also multiple titles using MARKER
button. Press MARKER at the desired titles to select multiple titles, and press
ENTER to display the menu on the left of the screen. Select [Dubbing] option
from the menu on the left of the screen and press ENTER to display the
[Dubbing] menu. Use v V b B to select [Start] icon then press ENTER to
confirm.
Dub a currently playing title +R
-R
This feature copies a single title to the HDD in real time. When you start
copying, playback jumps back to the start of the title, then continues through to
the end of the title, when recording automatically stops. The copy will be made
in the recording mode (XP, SP, LP, EP or MLP) that is currently set in the
SETUP menu.
Dubbing a title - more you can do
Before dubbing
Use the copying features of this recorder to:
Back up important recordings stored on the HDD to a DVD.
Make a DVD copy of a recording on the HDD to play in another player.
Transfer video from a DVD to the HDD for editing.
Transfer edited video from the HDD to DVD.
During DVD playback, press HOME to display the HOME menu. Select the
[Dubbing] in the [Easy Menu] option, and press ENTER to start dubbing. The
[Dubbing] option in the HOME menu will be activated only for a title from a
finalized DVD±R or DVD-ROM title without copy protection.
31
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 32
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Chinese
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Area Codes
Choose an area code from this list.
Area
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
32
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
FI
FR
DE
GB
GR
Area
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
Code
GL
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
MY
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles
New Zealand
Nigeria
Norway
Oman
Pakistan
Panama
Code
MV
MX
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
PA
Area
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Code
PY
PH
PL
PT
RO
RU
SA
SN
SG
SK
SI
ZA
KR
ES
Area
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 33
Troubleshooting
General
The power does not turn on.
b Plug the power cord into the wall outlet securely.
There is no picture.
b Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
b Connect the video connection securely.
Picture noise appears.
b You are playing a disc recorded in a colour system that is different from
your TV.
b The video signal from the external component is copy-protected.
b Set the resolution that your TV can accept.
The channel is not found or stored.
b Check your antenna connection.
There is no sound.
b Connect the audio connection securely.
b The input source setting on the amplifier or the connection to the amplifier
is incorrect.
b The unit is in scan, slow motion, or pause mode.
The remote control does not work properly.
b
b
b
b
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
Playback
The unit does not start playback.
b Insert a playable disc. (Check the disc type, colour system, and regional
code.)
b
b
b
b
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Cancel the Rating function or change the rating level.
Cannot play a disc recorded using this unit on other player.
b Finalize the disc.
b Check the disc compatibility of the player.
b Place the disc on the disc tray correctly inside the guide.
b Discs recorded with copy-once material cannot be played on other
players.
The angle cannot be changed.
b Multi-angles are not recorded on the DVD Video being played.
b The angle cannot be changed for the titles recorded on this unit.
The subtitle language cannot be changed or turned off.
b Subtitles are not recorded on the DVD Video being played.
b The subtitle cannot be changed for the titles recorded on this unit.
Cannot play MP3/WMA/JPEG/DivX files.
b The files are not recorded in a format that the unit can play.
b The unit does not support the codec of the DivX movie file.
b The resolution is higher than the unit can support.
33
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 34
Recording
Cannot record or does not record successfully.
b Check the remaining space on the disc.
b Check that the source you are trying to record from is not copy protected.
b The power may have failed during recording.
b Use a VR mode formatted disc for copy-once material.
Timer record does not record successfully.
b Clock is not set to correct time.
b The start time of the timer recording is past.
b Two timer recordings may have overlapped, in which case only the earlier
one will record completely.
b When setting the recording channel, make sure you set the unit’s built-in
tuner, not the TV’s built-in tuner.
Stereo Audio Record and/or Playback is not present.
b TV is not Stereo-compatible.
b Broadcast program is not in stereo format.
b The A/V Output jacks on the unit are not connected to TV A/V In jacks.
HDMI
The connected HDMI device does not display any picture.
b
b
b
b
Try disconnecting then reconnecting the HDMI cable.
Try switching the power of the HDMI device off then back on.
The video input of the connected device is set correctly for this unit.
The HDMI cable you are using is fully HDMI-compliant . Using a non-standard cable may result in no picture being output.
b Not all HDCP-compatible DVI devices will work with this unit.
The connected HDMI device does not output sounds.
b Some HDMI-compatible devices do not output sounds (check the manual
that came with the connected device).
b If your TV is not capable of handling 96 kHz sampling frequency, set the
[Sampling Freq.] option to [48 kHz] on the setup menu. When this choice
is made, this unit will automatically convert any 96 kHz signals to 48 kHz
so your system can decode them.
b If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital] and [MPEG] options to [PCM] on the setup menu.
34
b If your TV is not equipped with DTS decoder, set the [DTS] options to
[OFF] on the setup menu. To enjoy DTS multi channel surround, you must
connect this unit to a DTS compatible receiver via one of this unit’s digital
audio outputs.
Resetting the unit
If you observe any of the following symptoms.
The unit is plugged in, but the power will not turn on or off.
The front panel display is not working.
The unit is not operating normally.
You can reset the unit as follows.
Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
Unplug the power cord, wait at least five seconds, and then plug it in
again.
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 35
Playback
Specifications
Frequency response
General
Power requirements
Power consumption
Dimensions (approx.)
Net weight (approx.)
Operating temperature
Operating humidity
Television system
Recording format
AC 200-240V, 50/60 Hz
30W
430 X 49 X 275 mm (w x h x d) without feet
4 kg
5˚C to 35˚C
5 % to 65 %
PAL I, B/G, I/I, SECAM D/K, K1 color system
PAL
Recording
Recording format
Recordable media
Recordable time
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
DVD Video Recording, DVD-VIDEO
HDD (RH399H: 320GB, RH387H: 160GB),
DVD-RW, DVD-R, DVD+RW, DVD+R,
DVD+R(Double Layer), DVD-RAM
DVD (4.7GB): Approx. 1 hour (XP mode),
2 hours (SP mode), 4 hours (LP mode),
6 hours (EP mode), 14 hours (MLP mode)
DVD+R DL (8.5GB): Approx. 3 hours
(XP mode), 3.8 hours (SP mode),
7.3 hours (LP mode), 9.1 hours (EP mode),
21 hours (MLP mode)
HDD (160/320GB, MPEG2 Recording):
Approx. 43/85 hours (XP mode),
84/165 hours (SP mode),
164/323 hours (LP mode),
233/456 hours (EP mode),
477/935 hours (MLP mode)
Signal-to-noise ratio
Harmonic distortion
Dynamic range
DVD (PCM 48 kHz): 8 Hz to 22 kHz,
CD: 8 Hz to 20 kHz
DVD (PCM 96 kHz): 8 Hz to 44 kHz
More than 90 dB (AUDIO OUT connector)
Less than 0.02% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
Inputs
ANTENNA IN
VIDEO IN
AUDIO IN
DV IN
USB IN
Antenna input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
2.0 Vrms more than 47 kohms, RCA jack
(L, R) x 2
4 pin (IEEE 1394 standard)
4 pin (USB 1.1 standard)
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
HDMI
Audio
Audio
Audio
video/audio output
output (digital audio)
output (optical audio)
output (analog audio)
1.0 Vp-p 75 ohms, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, sync negative,
Mini DIN 4-pin x 1(C) 0.3 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1, (PB)/(PR) 0.7 V (p-p), 75 Ω,
RCA jack x 2
19 pin (HDMI standard, Type A)
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), Optical connector x 1
2 Vrms (1 kHz, 0 dB), 600 Ω,
RCA jack (L, R) x 2
Accessories
RF cable (1), Remote control (1), Battery (1), Audio cable (1), Video cable (1)
27MHz
MPEG2
48kHz
Dolby Digital
35
RH387H-W_BHKGLLX-ENG
7/13/11
10:27 AM
Page 36