Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Nous vous remercions d’avoir porté votre choix sur ce produit SHARP.
Pour en tirer le meilleur parti, veuillez lire ce mode d’emploi très attentivement.
MUSIC SYSTEM FOR iPod®
& iPhone®
SYSTÈME MUSICAL POUR
iPod et iPhone
MEMORY
MODEL
MODÈLE
DK-CL3P
ENGLISH
FRANÇAIS
Please refer to pages E-1 to E-21.
Se reporter aux pages F-1 à F-21.
OPERATION MANUAL
MODE D’EMPLOI
Accessories / Accessoires
Please confirm that only the following accessories are included.
Vérifier que les accessoires ci-dessous sont présents dans l’emballage.
AC/DC adaptor x 1 / Adaptateur CA/CC x1
92L88900013101
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
iPhone, iPod, iPod classic, iPod nano et iPod touch
sont des marques de commerce d’Apple Inc.,
enregistrées aux É-U et aux autres pays.
iPhone adaptor 12
Adaptateur iPhone 12
iPhone adaptor 15
Adaptateur iPhone 15
iPhone adaptor 19
Adaptateur iPhone 19
92L43200033101
92L43200033201
92L43200033301
ENGLISH
DK-CL3P
ENGLISH
SPECIAL NOTES
Important Instruction
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
E-1
WARNING : TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod or
iPhone, respectively, and has been certified by the developer
to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use
of this accessory with iPod or iPhone may affect wireless
performance.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
WARNING
FCC Regulations state that any unauthorized changes or
modifications to this equipment not expressly approved by the
manufacturer could void the user's authority to operate this
equipment.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or
theft, please record below the model number and serial
number which are located on the rear of the unit. Please retain
this information.
Model number
..............................................
Serial number
..............................................
Date of purchase ..............................................
Place of purchase ..............................................
IMPORTANT SAFETY INSTRUCTIONS
DK-CL3P
12) Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Additional Safety Information
15) Power Sources - This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
product intended to operate from battery power, or other
sources, refer to the operating instructions.
16) Overloading - Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a
risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
Important Instruction
ENGLISH
Electricity is used to perform many useful functions, but it can
also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured
with the highest priority on safety. However, improper use can
result in electric shock and/or fire. In order to prevent potential
danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your
safety and prolong the service life of this product, please read
the following precautions carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
1
E-2
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
IMPORTANT SAFETY INSTRUCTIONS (continued)
ENGLISH
Important Instruction
18) Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f ) When the product exhibits a distinct change in
performance - this indicates a need for service.
19) Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
20) Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
21) Wall or ceiling mounting - When mounting the product on a
wall or ceiling, be sure to install the product according to the
method recommended by the manufacturer.
22) Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
23) Protective Attachment Plug - The product is equipped with
an attachment plug having overload protection. This is a
safety feature. See Instruction Manual for replacement or
resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a
replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
24) Stand - Do not place the product on an unstable cart, stand,
tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the
manufacturer or sold with the product. When mounting the
product on a wall, be sure to follow the manufacturer's
instructions.
Use
only
the
mounting
hardware
recommended by the manufacturer.
E-3
DK-CL3P_A6 01-21.fm
2010 November 3
SPECIAL NOTES
Contents
DK-CL3P
ENGLISH
Page
Program Information
Products that have earned the
ENERGY STAR® are designed
to protect the environment
through superior energy
efficiency.
ENERGY STAR® is a U.S. registered mark.
■ General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Controls and indicators . . . . . . . . . . . . . . . . . . 6 - 7
■ Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . 8 - 9
■ Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the time and date . . . . . . . . . . . . . . . . . . . 11
■ iPod and iPhone
Listening to the iPod and iPhone . . . . . . . . 12 - 14
■ Radio
Listening to the radio . . . . . . . . . . . . . . . . . . 14 - 15
■ Advanced Features
Alarm operation . . . . . . . . . . . . . . . . . . . . . . 16 - 17
Enhancing your system . . . . . . . . . . . . . . . . 17 - 18
■ References
Troubleshooting chart . . . . . . . . . . . . . . . . . 18 - 19
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CONSUMER LIMITED WARRANTY . . . . . . . 21 - 22
General Information
ENERGY STAR
®
1
E-4
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
ENGLISH
Precautions
■ General
● Hold the AC/DC adaptor by the
● Please ensure that the equipment is
positioned in a well-ventilated area
and ensure that there is at least
4" (10 cm) of free space along the
sides, top and back of the equipment.
4" (10 cm)
4" (10 cm)
General Information
● Use the unit on a firm, level surface
head when removing it from the
AC outlet, as pulling the cord
can damage internal wires.
● The AC/DC adaptor is used as
a disconnect device and shall
always remain readily
operable.
● Do not remove the outer cover, as this may result in
free from vibration.
MEMORY
electric shock. Refer internal service to your local
SHARP service facility.
● This unit should only be used within the range of 41°F - 95°F
(5°C - 35°C).
● To prevent fire or shock hazard, do not expose this appliance
● Keep the unit away from direct
sunlight, strong magnetic
fields, excessive dust, humidity
and electronic/electrical
equipment (home computers,
facsimiles, etc.) which
generate electrical noise.
MEMORY
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures higher
than 140°F (60°C) or to extremely low temperatures.
● If your system does not work properly, disconnect the AC/DC
adaptor from the AC outlet. Plug the AC/DC adaptor back in,
and then turn on your system.
● In case of an electrical storm,
unplug the unit for safety.
to dripping or splashing. No object filled with liquids, such as
vases shall be placed on the apparatus.
Warning:
The voltage used must be the same as that specified on this
unit. Using this product with a higher voltage other than that
which is specified is dangerous and may result in a fire or other
type of accident causing damage. SHARP will not be held
responsible for any damage resulting from use of this unit with a
voltage other than that which is specified.
■ Volume control
The sound level at a given volume setting depends on speaker
efficiency, location and various other factors. It is advisable to
avoid exposure to high volume levels, which occurs while
turning the unit on with the volume control setting up high, or
while continually listening at high volumes.
E-5
DK-CL3P_A6 01-21.fm
2010 November 3
Controls and indicators
DK-CL3P
ENGLISH
■ Top panel
1.
2.
3.
4.
5.
6.
7.
Reference page
iPod and iPhone Dock . . . . . . . . . . . . . . . . . . . . . . . 13
DISPLAY (TV OUT)/ALARM Button . . . . . . . . . . . 8, 14
ON/STAND-BY/Alarm Reset/
FUNCTION Button . . . . . . . . . . . . 8, 10, 13, 14, 15, 18
Snooze/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . 10
Previous/Next/Tuning Up/Down Button . . . 11, 14, 15
Volume Up/Down Button . . . . . . . . . . . . . . . . . . . . . 10
Clock/MEMORY/PLAY/PAUSE Button . . . . . . . . 11, 14
General Information
1
5
2
6
3
7
MEMORY
■ Display
4
1
SUN
MON
TUE
WED
THU
FRI
SAT
PM
1.
2.
3.
4.
5.
6.
Reference page
Day Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Snooze Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Alarm Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Buzzer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
iPod/iPhone Indicator . . . . . . . . . . . . . . . . . . . . . . . . 16
FM Tuner Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 15
MHz
FM
6
2010 November 3
1
S
B
B
5
4
3
E-6
2
DK-CL3P_A6 01-21.fm
DK-CL3P
Controls and indicators (continued)
ENGLISH
General Information
OPEN
1
■ Bottom view
Reference page
1. Battery Compartment . . . . . . . . . . . . . . . . . . . . . . . . 9
1
2
3
4
■ Rear panel
1.
2.
3.
4.
Reference page
AUDIO IN Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FM Antenna Wire (fixed). . . . . . . . . . . . . . . . . . . . . . 15
Video Out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DC Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
E-7
DK-CL3P_A6 01-21.fm
2010 November 3
System connection
DK-CL3P
■ Connecting iPod or iPhone to TV
Video files from iPod or iPhone can be viewed by connecting the system to TV/
monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT jack at the back
of the unit and set the TV Out on the iPod or iPhone unit to “ON” position.
VIDEO OUT
Video cable
(not supplied)
TV
● Please make sure to set iPod unit to either NTSC or PAL to
■ AC/DC adaptor connection
1
Plug the AC/DC adaptor cable into the DC IN jack on
the unit.
2
Plug the AC/DC adaptor into an AC outlet.
1
AC/DC Adaptor Cable
2
To video input jack
■ Watching videos on a TV connected to iPod
1
Press the FUNCTION button on the main unit to select
the iPod function.
2
Enter the iPod or iPhone menu.
Press and hold DISPLAY(TV OUT) button on main unit
until ON appear on display.
3
4
Select the desired video to be played.
Press the ENTER button on the iPod unit to start playback.
For iPod touch and iPhone, playback will automatically
start once the desired file is selected.
Notes:
● To return to watch video on iPod or iPhone screen, return to
the iPod menu. Press and hold the DISPLAY(TV OUT) on
main unit until “OFF” appear on display.
● During iPod video playback, pressing the DISPLAY(TV OUT)
button until “OFF” appear on display will not toggle video out
display between iPod and TV.
ENGLISH
match your TV signal. Please visit Apple’s home page for
further information.
● Customer should also refer iPod operation manual before
making video out setting.
DC IN Jack
(DC 6V)
Preparation for Use
Make sure to unplug the AC/DC adaptor before making any connections.
AC Outlet
(AC 100 - 240 V, 50/60 Hz)
Notes:
● Unplug the AC/DC adaptor from the AC outlet if the unit will
not be used for a prolonged period of time.
● Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
● During unit operational with batteries, iPod/iPhone attached
can be used for playback only.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
1
E-8
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
ENGLISH
System connections (continued)
■ Install/Replace backup batteries
Use 4 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
Note:
Battery life may vary depending on the temperature, battery
types and usage conditions.
Open the battery cover.
● Installing the batteries incorrectly may cause the unit to
2
Insert the batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them
towards the – battery terminal.
● Insert the batteries according to the direction indicated in the
3
malfunction.
Close the cover.
battery compartment.
● Replace all old batteries with new ones at the same time.
● Do not mix old and new batteries.
● Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
OPEN
OPEN
Caution:
Do not use rechargeable batteries (nickeI-cadmium battery, etc.).
OPEN
Preparation for Use
Precautions for battery use:
1
Notes:
● Backup battery system is use to provide continuous alarm
operation and clock setting in event of a power failure. During
battery replacement, please make sure the AC/DC adaptor is
connected, otherwise all setting may be lost.
● Remove the batteries if the unit will not be used for a long
period of time to prevent battery leakage which may cause
potential damage.
● The first time the batteries is install, the clock will blinking on
the display. Please set the time and date (refer page 11).
E-9
DK-CL3P_A6 01-21.fm
2010 November 3
General control
DK-CL3P
■ Display brightness control (DIMMER)
ENGLISH
MEMORY
Dimmer 1
(Display is dim)
Dimmer 2
(Display gets dimmer)
Dimmer off
(Display is bright)
Notes:
● Setting dimmer to display in the brightest mode during battery
operation will affect battery life.
● During battery operation in standby mode, the brightness of
the display will automatically go to the lowest mode (dim OFF)
after 5 seconds.
■ Volume auto set in
If you turn off and on the main unit with the volume set to 17 or
higher, the volume starts at 16.
■ Volume control
■ To turn the power on
Press the ON/STAND-BY button to turn the power on.
The first time power is supplied to the unit, the clock will be
blinking on the display. Please set the time and date
(refer page 11).
Press the VOLUME (+ or –) button
to increase or decrease the volume.
Volume indicator will be blinking
when volume reaches maximum
and minimum level.
Basic Operation
Press the SNOOZE/DIMMER button to adjust the brightness of
LCD display.
MON
After use:
Press and hold the ON/STAND-BY button to enter the power
stand-by mode.
1
E-10
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
Setting the time and date
ENGLISH
2
Press the
or
button to adjust the hour and
then press the CLOCK button.
MON
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
“AM” or “PM” indicator will interchange after each 12 hour
cyclic in 12-H clock format.
Basic Operation
3
Press the
or
button to adjust the minutes and
then press the CLOCK button.
MON
MEMORY
Press the
or
button once to advance the time by
1 minute. Hold it down for about 2 seconds to change the
time in 5-minutes interval.
4
Press the
or
button to adjust the day and then
press the CLOCK button.
MEMORY
MON
THU
In this example, the clock is set for the 12-H (12 hour) display.
1
In standby mode, press the CLOCK button for more
than 2 seconds. The clock time display will blinking.
MON
MON
“:” will be blinking to indicate time and date setting is
completed.
Note:
During battery operations in standby mode, press the SNOOZE/
DIMMER button to display the clock for about 5 seconds.
Press the
or
button to select clock time display
format and then press CLOCK button.
E-11
DK-CL3P_A6 01-21.fm
2010 November 3
Listening to the iPod and iPhone
Caution:
● Please update your iPod and iPhone unit to the latest
software version before using it. Please visit Apple’s
homepage to download the latest version for your iPod and
iPhone.
Notes:
● Once the iPod or iPhone is connected to the unit it will begin
charging.
● If you have an iPod or iPhone that does not have an iPod 30
Pin connector, you can use an auxillary cable to connect it
to the AUDIO IN jack.
● The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
● The iPod or iPhone will not be charged while the main unit
uses batteries as power supply.
■ iPod and iPhone adaptor connection
ENGLISH
Note:
You can use an audio cable to connect your iPod or iPhone to
the AUDIO IN socket if:
1. your iPod or iPhone adaptor does not fit into the dock on the
main unit.
2. you have an iPod or iPhone that does not have an iPod or
iPhone adaptor.
3. you have an iPod that does not have an iPod 30 pin
connector.
iPhone
Adaptor No.
12
15
15
19
iPhone Description
iPhone
iPhone 3G
iPhone 3GS
iPhone 4
Capacity
4GB & 8GB & 16GB
8GB & 16GB
16GB & 32GB
16GB & 32GB
iPod and iPhone
iPod and iPhone operations
Made for:
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPod touch (3rd generation)
● iPod touch (2nd generation)
● iPod touch (1st generation)
● iPod classic
● iPod with video
● iPod nano (5th generation)
● iPod nano (4th generation)
● iPod nano (3rd generation)
● iPod nano (2nd generation)
● iPod nano (1st generation)
● iPod with colour display
● iPod mini
DK-CL3P
1
E-12
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
ENGLISH
Listening to the iPod and iPhone (continued)
■ To insert iPod or iPhone adaptor
1. Insert the iPod or iPhone adaptor into unit and connect your
iPod or iPhone.
iPhone (bottom)
■ iPod or iPhone playback
1
2
Press the ON/STAND-BY button to turn the power on.
3
Insert iPod or iPhone unit in the dock of main unit.
iPhone
iPhone
Dock connector
iPod and iPhone
Press the FUNCTION button on main unit to select the
iPod function.
iPhone adaptor
iPhone dock
iPhone connector
Caution:
Unplug all accessories for the iPod or iPhone before inserting it
into the dock.
■ To remove iPod or
iPhone adaptor
4
Press the
/ button on the iPod unit to start
playback.
For iPod touch and iPhone, playback will automatically
start once the desired file is selected.
■ To disconnect iPod or iPhone
Simply remove the iPod or iPhone from the dock. It is safe to do
so even during playback.
Insert the tip of a screwdriver (“-”
type, small) into the adaptor hole
as shown and lift upward to remove.
E-13
DK-CL3P_A6 01-21.fm
2010 November 3
Listening to the radio
DK-CL3P
ENGLISH
■ Various iPod or iPhone functions
Function
Play
Main unit
Operation
Press in the pause mode.
MEMORY
Press in the playback mode.
MEMORY
Track
up/
down
Fast
forward/
reverse
TV OUT
Press in the playback or pause
mode.
If you press the button in the
pause mode, press the /
button to start the desired track.
Press and hold down in the
playback mode.
Release the button to resume
playback.
MEMORY
iPod and iPhone
Pause
Press for more than 2 seconds
to toggle the video out display
between iPod or iPhone and TV.
iPod and iPhone operation
The operations described above depend on the generation iPod
or iPhone you are using.
■ Tuning
1
2
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button to select the Tuner
function.
1
E-14
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
Listening to the radio (continued)
ENGLISH
3
Tune to the desired station.
Manual tuning:
Press the TUNING (
or
) button as many times as
required to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
Notes:
● After 5 seconds the tuner
frequency will change to time
display. To preview the tuner
frequency, press DISPLAY(TV
OUT) button.
FM TUNER
● When radio interference occurs,
indicator
auto scan tuning may stop
automatically at that point.
● Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING (
or ) button
again.
Receiving an FM stereo transmission:
● If the FM reception is weak, the reception will auto changes
to monaural, and the sound becomes clearer.
MHz
FM
3
Within 5 seconds, press the MEMORY button
repeatedly to select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press and hold the MEMORY button
on main unit to store that station in memory.
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number will
be erased.
MHz
Radio
FM
■ Programming a station
You can store 20 FM stations in memory and recall them at the
push of a button. (Preset tuning)
1
2
MHz
FM
Note:
The backup batteries function protects the programmed stations
should there be a power failure or the AC/DC adaptor becomes
disconnected. If the backup batteries are drain off, the
programmed stations will be erased.
Perform steps 1 - 3 in “Tuning” on pages 14 - 15.
■ To recall a programmed station
While the Tuner frequency is display, press the
MEMORY button for more than 2 seconds on the main
unit to enter the preset tuning saving mode.
Press MEMORY button repeatedly to select the desired
programmed station.
E-15
DK-CL3P_A6 01-21.fm
2010 November 3
Alarm operation
DK-CL3P
ENGLISH
The unit turns on and play desired source (iPod, iPhone or
TUNER) or Buzzer sound for 1 hour alarm cycle.
Before setting the alarm:
1 Check that the clock is set to the correct time. (refer page 11)
If it is not set, you cannot use the alarm function.
2 For iPod playback: Insert iPod or iPhone to the unit. (refer
page 13)
3 For TUNER: Set preset memory. (refer page 15)
3
Press the
or
button to adjust the minutes and then
press the ALARM button.
SUN
4
WED
THU
FRI
SAT
Press the
or
button to select the day for the alarm
and then press alarm button.
SUN
MON
TUE
WED
THU
FRI
SAT
In standby mode, press and hold the ALARM button until the
alarm time and alarm icon blinking.
SUN
MON
TUE
WED
THU
FRI
Everyday: MON - SUN (Alarm activate daily)
Weekday: MON - FRI (Alarm activate from Monday to Friday
only)
Weekend: SAT - SUN (Alarm activate from Saturday to
Sunday only)
SAT
5
2
TUE
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5 minutes interval.
Setting the alarms
1
MON
Press the
or
ALARM button.
button to adjust the hour and press the
Press the
or
button to select the wake up
source and then press the ALARM button.
MON
SUN
MON
TUE
WED
THU
FRI
TUE
WED
SAT
THU
Advanced Features
■ Alarm
FRI
S
B
B
Wake up source selection:
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously. “AM” or “PM”
indicator will interchange after each 12 hour cyclic.
BUZZER
RADIO
iPod
1
Alarm icon “ ” will light up to indicate alarm setting is complete.
E-16
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
Alarm operation (continued)
Enhancing your system
Note:
If wake up source is set to iPod, and iPod is not present, the
alarm source will change to default Buzzer.
The auxiliary cable is not included. Purchase a separate
auxiliary cable as shown below.
ENGLISH
Advanced Features
■ Activate and deactivate the alarm
1
During standby mode, press ALARM button to
deactivate current alarm times and wake up source.
2
Press ALARM button again to reactivate the last alarm
function. When the alarm setting time is activated,
alarm information will shown for 5 seconds and alarm
icon ( ) will appear on display.
SUN
MON
TUE
WED
THU
FRI
Portable audio player
Computer
SAT
S
B
B
3
When alarm has started, alarm icon ( ) will blinking on
the display.
To the line
output jack
Daily Alarm:
● During alarm is function, press ALARM RESET button to stop
alarm and it will come again on the next day.
Auxiliary cable
(not supplied)
Sure Alarm:
● When power failure, the alarm will function if the backup
batteries are installed.
■ Snooze function
E-17
Once alarm has started, pressing the SNOOZE/DIMMER
button will stop alarm for 9 minutes.
During snooze, “ ” icon will light up and “ ” icon will blinking.
Once the snooze time has expired, alarm will continue.
The snooze function can be operated during 1 hour alarm cycle.
DK-CL3P_A6 01-21.fm
2010 November 3
Troubleshooting chart
1
Use the auxiliary cable to connect the portable audio
player, computer etc. to the AUDIO IN jack.
When using video equipment, connect the audio output to
this unit and the video output to a television.
2
3
4
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button to select AUX function.
Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the
television and do not make any auxilary playback while listening
to the iPod or iPhone.
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorized SHARP dealer or service center.
ENGLISH
■ General
Symptom
Possible cause
● The clock is not set to the
● Did a power failure occur?
● When a button is
● Set the unit to the power
correct time.
pressed, the unit does
not respond.
Reset the clock. (Refer to
page 11)
stand-by mode and then turn
it back on.
● If the unit still malfunctions,
reset it.
(Refer to page 19)
● No sound is heard.
● Is the volume level set to “0”?
■ Tuner
Symptom
Possible cause
● The radio makes unusual
noises continuously.
● Is the unit placed near the
TV or computer?
● Is the FM antenna placed
properly? Move the antenna
away from the AC/DC
adaptor if it is located
nearby.
Advanced Features/Reference
■ Listening to the audio/video sounds from
portable audio player, computer etc.
DK-CL3P
1
E-18
2010 November 3
DK-CL3P_A6 01-21.fm
DK-CL3P
Troubleshooting chart (continued)
ENGLISH
■ iPod and iPhone
■ Condensation
Symptom
● No sound is produced.
Possible cause
● The iPod or iPhone unit
No image appears on
the TV/monitor.
●
●
References
●
●
●
● iPod or iPhone will not
charge.
software version is not update
to the latest version. Please
visit Apple’s homepage.
The iPod or iPhone is not
playing.
The iPod or iPhone is not
properly connected to the unit.
Is the AC/DC adaptor of the
unit plugged in?
The video cable is not properly
connected.
The TV/monitor’s input
selection is not properly set.
● The iPod or iPhone is not
making full contact with the
connector.
● Is the AC/DC adaptor of the
unit plugged in?
● Using iPod (3rd generation).
● The main unit is using
batteries as power supply.
● The iPod or iPhone is not
compatible. Refer page 12 for
compatible models.
● “This accessory is not
made to work with
iPhone” or similar
appears on iPhone
screen.
E-19
DK-CL3P_A6 01-21.fm
● The iPhone battery is low.
Please charge the iPhone.
● iPhone not properly docked.
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a soft
cloth before operating the unit.
■ If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, remove the backup
batteries.
■ Clearing all the memory (reset)
During standby mode, press and hold SNOOZE button for 5
seconds. Display will become blank for awhile and main unit will
reset.
Caution:
This operation will erase all data stored in memory including
clock, alarm settings and tuner preset.
■ Before transporting the unit
Remove the iPod or iPhone from the unit. Then, set the unit to
the power standby mode. Carrying the unit with iPod or iPhone
left docked might damage both systems.
2010 November 3
Maintenance
■ Cleaning the unit
Periodically wipe the unit with a clean soft cloth.
DK-CL3P
ENGLISH
Caution:
● Do not use chemicals for cleaning (gasoline, paint thinner,
etc.). It may damage the unit finishing.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
Specifications
■ General
Power source
DC IN 5.9V
2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
6V
(UM-3/SUM-3, R6/AA) x 4
Power
consumption
11 W
Output power
Front speakers:
0.6 W watts minimum RMS per channel
into 8 ohms from 100 Hz to 20 kHz, 10%
total harmonic distortion.
Speaker
1-way type speaker system
2.5" (6.5 cm) Full Range
Speaker maximum 1.2 W/Channel
input power
Speaker rated
input power
0.6 W/Channel
Output terminals
Video output: 1Vp-p
Input terminals
Auxiliary (audio signal):
500 mV/47 k ohms
Dimensions
Width: 4" (100 mm)
Height: 33/4" (96.2 mm)
Depth: 45/14" (110 mm)
Weight
0.77 lbs. (0.35 kg)
References
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
■ Tuner
Frequency range
FM: 87.5 - 108.0 MHz
1
E-20
2010 November 3
DK-CL3P_A6 01-21.fm
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when ship in its original container,
will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a
new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in
design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any
warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
DK-CL3P MUSIC SYSTEM for iPod & iPhone
(Be sure to have this information available when you need service for your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from Warranty Coverage (if any): Non-functional accessories, supplies, and consumable items.
At a Sharp Authorized Servicer located in the United States.
Where to Obtain Service:
To find a location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
Ship your Product prepaid to a Sharp Authorized Servicer
What to do to Obtain Service:
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495 - 1163
E-21
DK-CL3P_A6 02-22.fm
2010 October 29
VALID IN CANADA ONLY
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when
shipped in its original container and sold or distributed in Canada by Sharp or by an Authorised Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such defects should be found in
this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inap
s
manual.
s Authorised
Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not li mited to head cleaning tapes and
chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product includi ng but not limited to earphones,
remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product together with proof of
purchase and a copy of this LIMITED WARRANTY statement to an Authorised Sharp Service Centre or an Authorised Sharp Servicing Dealer. In home warranty
s discretion on any Sharp television with the screen size of 27” or larger and on any Sharp Over The Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is authorised to extend, enlarge
or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all liability for direct o r indirect damages or losses or for any
incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the
loss of time or use of this Sharp product or the loss of information. The purchaser will be responsible for any removal, reinst allation, transportation and insurance
costs incurred. Correction of defects, in the manner and period of time described herein, constitute complete fulfilment of al l obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
Colour Television
LCD TV
Camcorder
Audio Products
Vacuum Cleaner
1 year (picture tube 1 additional year)
1 year
1 year
1 year
1 year
WARRANTY PERIODS
LCD Projector
Vi d e o C a s s e t t e R e c o r d e r
TV/VCR Combo
Microwave Oven
DVD Player
1 year (bulb 90 days)
1 year
1 year (picture tube 1 additional year)
2 years (magnetron 3 additional years for part only)
1 year
To obtain the name and address of the nearest Authorised Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD.
SHARP ELECTRONICS OF CANADA LTD
335 Britannia Road East
Mississauga, Ontario
L4Z 1W9
(905) 568-7140 or 1-(877) SHARP-CC
Web site: www.sharp.ca
1
E-22
DK-CL3P_A6_Warranty EN.fm
2010 November 3
MEMO/MÉMORANDUM
MEMO/MÉMORANDUM
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East, Mississauga,Ontario L4Z 1W9
PRINTED IN CHINA
IMPRIMÉ EN CHINE
92L87500013101
10K R KI 1