Network Controller SPC-2000 User Guide
Before installing and operating this product,
please read this manual thoroughly.
ENGLISH
License Agreement
All copying, reprinting, and translating to other languages of part of or all of its contents without the permission of
Samsung Techwin Co., Ltd. are expressly prohibited.
Samsung Techwin Co., Ltd. reserves all copyright of this user’s manual.
Limited Liability
- This product is support equipment for surveillance system. Therefore, we can't compensate for material loss
and/or personal injuries by robbery, fire, natural disaster or other such events.
- The specification for this product may change without prior notice for product improvement.
Standards-Compliance Notice
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: ·
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION : Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operated the equipment.
Warranty
Samsung Techwin is not responsible for any issues related to buying and selling this product, nor promoting
specific dealers or agencies.
Samsung Techwin cares for the environment at all product manufacturing stages to preserve
the environment, and is taking a number of steps to provide customers with more
environment-friendly products. The Eco mark represents Samsung Techwin's will to create
environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.
The product warranty does not cover the following cases:
• Product damage or malfunction caused by improper handling and/or use of the product by user.
• Damage caused by disassembly and/or alteration by the user.
• Damage caused by connecting a power supply with incorrect specifications.
• Product damage or malfunctions caused by natural disasters (fire, flood, tsunami, etc.).
• Product damage caused by using expendable parts from an unauthorized third party.
Warranty is provided only upon purchasing the product. During the warranty period, a service fee will be charged
for repair and/or inspection for the product for any problems that are not covered by the warranty. After the
warranty expires, a service fee will be charged for repair and/or inspection for the product for all problems.
Network Controller
2
User Guide
Network Controller
3
User Guide
Cautions Before Use
Cautions Before Use
Caution
Warning
■ Please contact your vendor for product installation.
- Improper connection and/or installation of the product may cause electric shock, fire, severe
injuries, and damage to property.
■ Please install the product on stable, level ground. - Always test and verify the durability and stability of the installation location.
- Dropping the product from heights may cause product malfunction and/or cause injuries.
■ Do not disassemble or attempt to repair without consulting a professional technician.
- Neglecting this warning may cause electric shock, fire, and/or product malfunction.
■ Do not operate this product in places that are exposed to inflammable substances.
- Avoid gas and other inflammable substances that may cause fire, explosion, and other
serious accidents.
■ This product is designed to be used indoors.
- Do not expose it to outdoor weather conditions, water, or high humidity.
- Water leakage may cause corrosion and severe damage to the product.
■ Do not operate the product in places that are exposed to thick dust, smoke, or high humidity.
- It may cause fire, electric shock, and/or severe damage to the product.
■ Do not operate this product at extreme temperatures.
- High and low temperatures may cause damage to the product.
- The product’s operating temperature is between 0° and 40°.
■ Do not expose the product to direct sunlight.
- It may cause discoloration and damage to the product.
■ Do not subject the product to shock. - It may cause damage to the product.
■ Do not touch the power plug with wet hands.
- It may cause electric shock and possibly death.
■ Do not soak the product with water.
- If soaked, turn off the product immediately.
- If soaked, stop using the product and contact us as soon as possible.
■ Stop using the product if you detect unusual problems.
- If you detect smoke or a burning odor from the product, turn off the product immediately.
- Using the product while having these problems may cause severe hardware and software
damage.
Maintenance Instructions
■ T o clean the controller, turn off the power and use a soft cloth to wipe off dirt.
- Do not use alcohol, benzene, or other chemicals for cleaning.
■ Use only the specified voltage and current.
-C
onnecting the product to improper voltage and current may have risks of fire, electric shock,
and/or hardware and software damage.
■ Handle the power cord with care.
- Do not damage or modify the power cord.
- Do not pull the cord, expose it to excessive heat, or place heavy objects on it.
- Neglecting this warning may cause fire, electric shock, and/or damage to the product.
Network Controller
4
User Guide
Network Controller
5
User Guide
Table of Contents
● License Agreement………………………………………………………… 2
● Limited Liability… ………………………………………………………… 2
● Product Warranty…………………………………………………………… 2
Product Features
The SPC-2000 consists of a 3-axis handle for PTZ operation and 12 buttons for custom
settings. The SPC-2000 helps you to control monitoring cameras more easily and accurately.
It supports USB connection for convenient use in a computer environment. Connect it to the
USB port on a computer that supports DirectX; you can use it immediately, without extra
software installation.
● Standards-Compliance Notice…………………………………………… 3
● Cautions Before Use ……………………………………………………… 4
Part Names & Functions
● Table of Contents ………………………………………………………… 6
● Product Features … ……………………………………………………… 7
● Part Names & Functions ………………………………………………… 7
The SPC-2000 controller consists of a joystick and main unit. Pull the joystick left, right, up,
or down to control the Pan and Tilt operations. To zoom in or out on the screen, rotate it. 2
buttons are on the joystick, and the remaining 10 are on the main unit. You can configure the
buttons to perform functions in the pre-set settings.
● Pan / Tilt / Zoom Using Joystick ………………………………………… 8
● System Requirements……………………………………………………… 9
● Installing the Controller………………………………………………… 9
● Calibrating the Controller…………………………………………………10
● Troubleshooting… …………………………………………………………11
● Product Specifications ……………………………………………………12
● Product Design … …………………………………………………………13
● Product Warranty……………………………………………………………14
Network Controller
6
User Guide
Pic 1. SPC-2000
Network Controller
7
User Guide
Pan / Tilt / Zoom Using Joystick
■ To pan your camera, pull the joystick left and right. To tilt, pull it up and down. The farther
you move the joystick from the center, the faster the camera moves. To zoom in and out
on the monitoring screen, rotate the joystick clockwise or counterclockwise. The more you
rotate the joystick, the faster the zoom speed is.
System Requirements
- Windows 2000, Windows XP, Windows Vista, Windows 7
- Microsoft DirectX 7.0a or higher
- USB conversion software that detects the controller via DirectX
- 1 USB port
Installing the Controller
1. Turn on your computer, and then connect the controller to the USB port.
2. A window appears informing you that a new device has been detected.
3. Your computer detects the controller automatically.
(If necessary, install the controller following the instructions in the installation window.)
4. Once the controller is detected, its name displays under the Game Controllers list in Control Panel.
[Start] → [Settings] → [Control Panel] → [Game Controllers]
Pic 2. Pan & Tilt Control
[ Zoom Wide Action ]
[ Zoom Tele Action ]
Pic 3. Zoom Control
Pic 4. Control Panel
Network Controller
8
User Guide
Network Controller
9
User Guide
Installing the Controller
Calibrating the Controller
Pic 7. Device Calibration Wizard
Pic 5. Game Controllers Window
Troubleshooting
Calibrating the Controller
For best results, all the axes of the controller must be calibrated.
1. Go to [Start] → [Settings] → [Control Panel] → [Game Controllers] → [Properties] → [Setup].
2. Press the [Calibrate] button to run the “Device Calibration Wizard.”
3. Calibrate the axes following the instructions on the screen.
If you experience any problem using the product, please check the following.
1. If the controller does not operate properly:
· Go to [Start] → [Control Panel] → [Game Controllers], and then click the [Troubleshooting] button.
2. If your computer does not detect the controller:
· Check if the operating system supports DirectX.
· Check if the computer’s USB port is working properly.
3. If the controller buttons are hard to press:
· Check if there is anything blocking the buttons. Clean and remove any blockage.
4. If the joystick is hard to move:
· Check if there is anything blocking the bottom of the joystick. Clean and remove the blockage.
5. If the joystick moves uncontrollably:
· Run the "Device Calibration Wizard".
Pic 6. Controller Properties Window
Network Controller
10 User Guide
Network Controller
11 User Guide
Product Design
Product Specifications
Model Name
SPC-2000
Joystick
Axis
Hall-effect 3 Axes
12ea
Button
Performance
Range of
Movement
X/Y-Axis
Z Axis
Center
Minimum Power
Operating Power
Maximum Power
Materials
Housing
Handle
Cover
Knob
Interface
Port
Software
Drivers
Electric Features
Operating Voltage
Operating Current
Operating Environment
Temperature
Miscellaneous
Power Cord Length
Size
Size
Length
Width:
Weight
Color
Ø 1.39in
(35.31mm)
±18°
±40°
Single Spring, All Directions
0.109 [N·m]
0.151 [N·m]
0.169 [N·m]
High Solidity ABS
High Solidity Glass-Reinforced Nylon
Thermoplastic Elastomer
Stainless Steel
3.11in
(78.99mm)
5.03in
(127.76mm)
1.92in
(48.77mm)
6.64in
(168.66mm)
4-pin USB Type A
Standard DirectX Drivers (DirectInput)
(DC 5 [V]), Vdd = 5 [V] (±0.5 [V]) via USB
32 [mA]
6.16in
(156.46mm)
-25℃ to +70℃
2 [m]
156 [㎜]
169 [㎜]
126 [㎜]
440 [g]
Black
Network Controller
12 User Guide
Network Controller
13 User Guide
DECLARATION OF CONFORMITY
Application of Council Directive(s)
2004 / 108 / EC
Manufacturer's Name SAMSUNGTECHWIN CO., LTD.
Manufacturer's Address
SAMSUNGTECHWIN CO., LTD.
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-716
MEMO
European Representative Name
European Representative Address
Equipment Type/Environment Network Controller
Model Name SPC-2000
Beginning Serial NO. C5A46V3Z200001X
Year of Manufacture 2010.04.01
Conformance to EN 55022 : 2006
EN 50130-4 : 2003
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe
Signature Signature
Full Name BONJENG GU
Full Name
Position QUALITY CONTROL MANAGER Position Place CHANGWON, KOREA
Place
Date 2010.02.01
Date
Network Controller
14 User Guide
Network Controller
15 User Guide
SALES NETWORK
•
AMSUNG TECHWIN CO., LTD.
S
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL: +82-70-7147-8740~60 FAX: +82-31-8018-3745
•
AMSUNG TECHWIN AMERICA Inc.
S
1480 Charles Willard St, Carson, CA 90746, UNITED STATES
Tol Free : +1-877-213-1222 FAX : +1-310-632-2195
www.samsungcctvusa.com
•
AMSUNG TECHWIN EUROPE LTD.
S
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
www.samsungtechwin.com
www.samsungsecurity.com
VAN 10. 03