B A C D E F O Q R J G K M I H P N L PROGRAMME

AWOE57100
This washing machine is equipped with automatic
safety functions which detect and diagnose at an early
stageand react appropriately, e.g.:
A. "Door open" indication
B. "I-Check" indication
C. "Water tap closed" indication
Please check the pressure of water sources and
whether the tap is opened.
D. "Clean pump" indication
Please check whether the drain pipe is knotted or the
drain pump is blocked.
E. Programme selector
F. "Start / Pause" button
G. "Reset / Drain" button
Programme
C
PROGRAMME CHART
J
A
D
N O P Q R
Max
Load
Pre Main
Wash Wash Softener
kg
Wash
Rinse
Rinse Hold Spin/Drain
K. "Start Delay" button
L. "Temp." button - Temperature adjustment
M. Time and temperature display
N. "Prewash" option button
O. "Wash Time" option button
P. "Intensive Rinse" option button
Q. "Spin Time" option button
R. "Spin Speed" option button
Detergent and
additives
- For temperature selection, respect the manufacturer's recommendations on the care label
Cotton
(cold water, 30°C, 40°C,
50°C, 60°C, 70°C, 80°C,
95°C)
Prewash
L
F
E
Type of wash/Notes
Care
Labels
M
B K
G
I
H
H. "Tumble Fresh" button
I. "Favourite" button
J. Programme sequence indicator
Special options
Intensive Default Wash Spin Start
Temp.
Rinse Rinse Time Time Delay
Times
Rinse
Hold
Spin
Pre Tumble Favourite Add
Speed wash Fresh
Garment
Max.
spin
speed
rpm
Normally to heavily soiled bed linen, table line and underwear, towels, shirts etc. made of cotton and
linen.With heavily soiled laundry the additional "Prewash" option can be selected as well.
7.0
YES
Normally soiled bloluses, shirts, overalls etc. made of polyster (Diolen, Trevira), polyamide (Perlon, Nylon)
or blendswith cotton.
2.5
YES
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
YES
1000
Shortly worn or new outer clothing, sportswear made of cotton, polyester, polyamide and/or blends.
3.0
YES
1000
Delicate clothing, dresses skirts, shirts and blouses.
2.0
YES
This programme (40 C) is tested and approved by the Woolmark Corporation for machine washable wool.
Only woollens, labelled with the woolmark and identified as machine washable. Certification number of the
washingmachine is M1138.
1.0
YES
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.
1.0
YES
Clothing of large size, such as curtains, sheets, quilt cover and so on.
7.0
YES
Delicate lingerie or textile with lace.
1.0
YES
95 C Anti-bacterial
(70°C, 80°C, 95°C)
Can effectively eliminate the bacteria in the clothes, suitable for cotton fabrics which need high-temperature
sterilization and not easy to be bleached, such as baby clothes.
7.0
YES
Drum Clean
(cold water, 30°C, 40°C,
50°C, 60°C, 70°C, 80°C,
95°C)
Used to eliminate bacteria and dirt breed by a period of using the washing machine. (For cleaners, select
chlorinebleach or non-foaming cleaning agents. Improper use may cause the bubbles spill from the dispenser
box, which is a normal phenomenon; the default temperature for the programme is 95oC, without adding
cleaning agent)
Synthetics
(cold water, 30°C, 40°C)
Daily Load
(cold water, 30°C, 40°C,
50°C, 60°C)
Speed 15’
(cold water, 30°C)
Delicates
(cold water, 30°C)
Wool
(cold water, 30°C, 40°C)
Hand Wash
(cold water, 30°C, 40°C)
Big Items
(cold water, 30°C, 40°C,
50°C, 60°C)
Lingerie
(cold water, 30°C, 40°C)
o
Rinse & spin
Spin
Silent
(cold water, 30°C, 40°C,
50°C, 60°C)
30
1000
(3)
800
(4)
800
(1)
(1)
o
1000
(4)
1000
(4)
1000
YES
The default programme is rinse and spin for one time.
7.0
1000
In this programme spin time and spin speed can be selected.
7.0
1000
This programme is for the night using with low noise, end buzzer closed and Tumble Fresh programme starts
automatically.
7.0
YES
: Optional
YES: Dosing required
—: Not optional / non-add
: According to the selection of "prewash time" programme to add detergent / sterilizing agent
(1) For improved garment care, spin speed is restricted to 800 rpm in this program.
(3) Option available for use under 70°C.
(2) For improved garment care, spin speed is restricted to 400 rpm in this program.
(4) If you select prewash time, then Add Garment is optional.
800
Whirlpool is a registered trademark of Whirlpool USA
BASIC CHART
PROGRAMME DATA
Temperature
Programme
(℃)
Cotton ※※
Approx. Programme
Duration (hours: minutes) ※
2:11
70, 80, 95
START DELAY
FAVOURITE
The “Start Delay” function allows the machine to be run at the
consumer’s convenience, for example at night when electricity is
cheaper.
• Select the programme, temperature and the desired options.
• Press the “Start Delay” button to select one of the delay time from 1
to 23 hours.
• Press the “Start / Pause” button, the LED display above the “Start
Delay” button displays the delay time and the countdown begins.
• The delay time indication disappears when the programme starts and
is replaced by the remaining programme time.
• To change the time delay, once the “Start / Pause” button has been
pressed, press the “Start / Pause” button and then press the “Start
Delay” button to select the desired time delay.
To Cancel “Start Delay”:
• Before press the "Start / Pause" button
Turn the programme selector to another position, or; Press the “Start
/ Pause” button.
• After press the "Start / Pause" button
Press the “Reset” button for at least 3 seconds, the “Start Delay” time
disappears from the time display.
When you have chosen the desired washing process but not yet press
the “Start/Pause” button, you can press “Favourite” button for at least
3 seconds. Each washing process has its predefined process.When
you want to reset a new process for each washing program, the
original one will be overwritten by then.
Turn Programme Selector when you want to have Favourites function.
Choose the relative process. Hold “Favourite” button for 3 seconds or
more and press “Start / Pause” button to inflate the Favourite process.
Cotton ※※※
60
3:18
Cotton
Cold water(20),30,40,50
3:03,3:04,3:08,3:11
Synthetics
Cold water (20),30,40
1:16,1:17,1:21
Daily Load
Cold water (20),30,40,50,60
1:00
Speed 15’
Cold water (20),30
0:15
Delicates
Cold water (20),30
0:45
Wool
Cold water (20),30,40
0:35
Hand Wash
Cold water (20),30,40
0:35
Big Items
Cold water (20),30,40,50,60
3:03,3:04,3:08,3:31,3:38
Lingerie
Cold water (20),30,40
0:35
PROGRAMME START
95°
Anti-bacterial
Drum Clean
2:11
Cold water(20),30,40,50,60,70,80,95
0:50,0:51,0:55,1:03,1:10,1:38,1:38,1:38
Cold water (20),30,40,50,60
0:50
Open the tap and press the “Start / Pause” button. The indication lamp
next to the “Start / Pause” button lights up. The programme sequence
indicator shows the current programme phase, from left to right, as
Prewash, Wash,Rinse, Rinse Hold and Spin / Drain. The time display
shows the remaining programme time. Due to variations in load and
the temperature of the inlet water, the remaining time is re-calculated
in certain programme phases. When this occurs, the remaining
programme time is replaced by an animation.
Silent
70, 80, 95
Programme data were measured in normalized conditions in compliance with Standard IEC/EN60456, GB/T4288. Actual water and power consumption for
home use is related with the water pressure and temperature, the load and the type of wash.
※
The actual running time can deviate from the values in the table, because it takes into account the household conditions applicable at that time.
※※
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
※※※ Standard test procedures for washing machines.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT
THE PROGRAMME
Add detergent as indicated on the front page and as described in the
chapter "Detergent and Additives" in your Instructions for Use.
(Always use high efficiency, bubble-free or low foam detergent for
front load washing machine.)
1. Turn the programme selector to the desired programme.
2. The time display shows the duration of the chosen programme (in
hours and minutes) and the default wash temperature, and the "Start
/ Pause" indication lamp is flashing.
3. The indication lamp of the predefined spin speed lights up.
SELECT ANY DESIRED OPTION
Press the selected option button once, the current value is displayed
on the display. By pressing the button repeatedly, the display will
display the values in sequence. By pressing the button of the desired
option, the respective indicator lights up. When the combination of
programme and additional options is not possible, the indication lights
switch off automatically. Unsuitable combinations of options are
deselected automatically.
"Prewash" button
• Add detergent / sterilizing agent to the prewash chamber. Powdered
detergent / sterilizing agent is recommended. If using liquid detergents
/ sterilizing agent, it is recommended that adding in prewash chamber
at the same time as water inputting in the prewash period.
• Only for sterilization and heavily soiled loads (for example,sand,
granular dirt, etc.). Initial set time for the “Prewash” is about 18
minutes, during which the drum will rotate. The “Soak” time, which will
commence after the “Prewash” cycle, can be increased by 10 minutes
for each additional press ofthe button. Press the “Prewash” button to
set the desired “Soak” time. The appliance will complete the
“Prewash”cycle,lasting about 18 minutes and then keep the laundry
soaked, up to the selected time. The water is then drained out.
Wash Time
• The wash time can be adjusted by pressing the button. The
maximum adjustment range is from 10 to 90 minutes,depending on
the Wash Programme selected.
"Intensive Rinse" button
• An extra rinse is added for each press of the button. Up to 3 rinse
times can be selected, to prolong the rinse cycle.
• The total extra rinse times is displayed in the display.
• This option is particularly suitable for areas with very soft water,
washing baby clothing and people with allergies.
"Spin Time" button
• Applies only to the 'Spin' programme. The duration of spin can be
selected in 5, 8, 10 or 14 minutes.
"Spin Speed / Rinse Hold"
button
• Every programme has a pre-defined max. spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spin is cancelled, but
intermediate spin peaks remain during the rinse cycle. Only the
water is drained out.
• To activate “Rinse Hold”, press the “Spin Speed” button
repeatedly, until the “Rinse Hold” symbol
lights up. To select
“Rinse Hold”, the “Rinse Hold” light in the programme sequence
indicator is on. The laundry remains in the last rinse water without
progressing to the final spin cycle, to avoid creasing of the laundry.
PROGRAMME END
• All the lights of the programme sequence indicators are off and the
“Door Open” indication lights up.
1. Turn the programme selector to the “Off / 0” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar, to allow the drum to dry.
CHANGE PROGRAMME AND / OR OPTIONS AFTER
PROGRAMME START
1. Press the “Start / Pause” button to pause the programme. The
indication light flashes.
2. Select the new programme, the temperature, options and the
required spin speed.
3. Press the “Start / Pause” button again. The new programme
continues at the same position, where the previous programme was
interrupted. Do not add detergent again.
"DOOR OPEN" INDICATION
Before the start and after the end of a programme, the “Door Open”
indication lamp, lights to show that the door can be opened. While a
wash programme is running, the door remains locked and must on no
account be forced open. In case, there is an urgent need to open it
during a running programme, refer to“Cancel (Reset) a running
programme before the end”.
RED FAILURE INDICATIONS
“Water Tap Closed”:
If the appliance has insufficient or no water supply, the “Water Tap
Closed” indication will light up. Open the water tap. If the indication
still lights up, refer to the “Trouble Shooting Guide” in the Instructions
for Use.
“Clean Pump”:
If the waste water is not being pumped out, the “Clean Pump”
indication will light up. Check whether the drain hose or the filter
requires to be cleaned. In the latter case, refer to, “Removing the
Filter” in the Instructions for Use.
“I-Check”:
If a failure occurs during the programme, the indication lamp lights up
and the failure code appears on the LED display. To understand the
meaning of the respective failure code, refer to the “Fault Description
Table” in the Instructions for Use.
ADD GARMENT
If you want to add garments in the process of the washing, please
press "Start/Pause" button.
• If can add garment, the washing time in the big screen will wink ,
waiting for the "door open" indication lights, then open the door and
add the garment.
• If the washing time in the big screen doesn't wink, it means you can't
add garment in the process of the washing, it may be caused by the
water temperature over 40°C or over the time for adding garment.
CANCEL / RESET A RUNNING PROGRAMME BEFORE
THE END
The “Reset” button cancels a set programme before the end of the
cycle.
To reset, press the “Reset” button for at least 3 seconds. Water from
the machine is then drained out, before the door can be opened.
How to terminate "Rinse Hold"
• To terminate “Rinse Hold”, by spinning the laundry, press the “Spin
Speed” button to select the desired spin speed and then press the
“Start / Pause” button. The programme will then terminate
automatically after the spin cycle.
• To terminate “Rinse Hold” and drain the water, without any
spinning, press the “Start / Pause” button.
TEMPERATURE CONTROL
On selecting a programme, a predefined temperature is displayed.
Press the button to set another temperature.
TUMBLE FRESH
Select this option, the washing machine will automatically
start to "Tumble fresh" programme in half an hour after
programme end; the drum will rotate 8 seconds to different
directions at an internal of 8 minutes, to import the fresh air
to reduce wrinkles. The periodic tumbling will last up to
approximately 8 hours after the end of your wash
programme, and you can stop it at any time by pressing the
“Start / Pause” button. Unload laundry when the door open
indication lamp lights on. Once the door is opened, the
programme will end.
Whirlpool is a registered trademark of Whirlpool USA
W10490876 B
Download PDF
Similar pages