G4SM23-RGS Parts Listing - Beverage Equipment Company

G4SM-23-RGS
Part No.
874482
Description
ACCUM/CAPILLARY/SUCTION LINE, R-12
874403
ACCUM/CAPILLARY/SUCTION LINE, R-134A
7' X 0.054" ID
USED AFTER SER. NO. 1-1526829.
874483
ACCUM/CAPILLARY/SUCTION LINE, R-134A
12' X 0.064" ID
USED BEFORE SER. NO. 1-1526830.
866743
ACCUMULATOR
801740
ADAPTER, POWER CORD, ONE PIECE PAN
HEATER
ALARM, TEMPERATURE, CHROMOTOGRAPHY,
CELCIUS DIGITAL DISPLAY, 115V
880169
Additional Information
Size
8' X 0.046" ID
LOCATED BETWEEN EVAPORATOR COIL AND SUCTION
9"
LINE
CONNECT TO POWER CORD FOR HARDWIRING TO
CABINET
CELCIUS DIGITAL DISPLAY. IN PLASTIC CASE. USED TO 5"W X 4 1/4"H X 1 3/4"D CASE THERMOMETER, FOR FACTORY INSTALL
MONITOR TEMPERATURES AND SOUNDS ALARM WHEN
SIZE
ONLY. REQUIRES METAL SIGN PANEL WITH
TEMPERATURE BEYOND RANGE SET. THIS IS A PANEL
CUT OUT FOR ALARM SYSTEM.
MOUNT MODEL FOR FACTORY INSTALL ONLY. INCLUDES
NIMH BATTERY BACKUP AND POWER CORD PLUG
880170
ALARM, TEMPERATURE, CHROMOTOGRAPHY,
CELCIUS DIGITAL DISPLAY, 115V/208V/220V/CE
CELSIUS DIGITAL DISPLAY. FOR FIELD INSTALL.
MONITORS TEMPERATURES AND SOUNDS ALARM WHEN
TEMPERATURE GOES BEYOND RANGE SET. INCLUDES
NIMH BATTERY BACKUP AND POWER CORD PLUG
CELCIUS DIGITAL THERMOMETER, FOR FIELD
INSTALL. COMES WITH VELCRO SO IT CAN BE
PLACED IN ANY LOCATION. NO SPECIAL SIGN
PANEL REQUIRED. HAS TRANSFORMER ON
PLUG SO IT WORKS WITH ALL VOLTAGES.
875563
ALARM, TEMPERATURE, CHROMOTOGRAPHY,
FARENHEIT DIGITAL DISPLAY,
115V/208V/220V/CE
FOR FIELD INSTALL. THIS MONITORS TEMPERATURES
AND SOUNDS ALARM WHEN TEMPERATURE GOES
BEYOND RANGE SET. INCLUDES NIMH BATTERY BACKUP,
POWER CORD & PLUG AND PROBE
FOR FIELD INSTALL. COMES WITH VELCRO
SO IT CAN BE PLACED IN ANY LOCATION. NO
SPECIAL SIGN PANEL REQUIRED. HAS
TRANSFORMER ON PLUG SO IT WORKS WITH
ALL VOLTAGES.
874743
ALARM, TEMPERATURE, CHROMOTOGRAPHY,
FARENHEIT DIGITAL, 115V
IN PLASTIC CASE. USED TO MONITOR TEMPERATURES
AND SOUNDS ALARM WHEN TEMPERATURE BEYOND
RANGE SET. THIS IS A PANEL MOUNT MODEL FOR
FACTORY INSTALL ONLY. INCLUDES NIMH BATTERY
BACKUP AND POWER CORD PLUG
873008
BACKPLATE KIT, DOOR GASKET
2)26 5/8", 2)54-1/4" PIECES
873004
BACKPLATE, DOOR GASKET, SIDE PIECE
4 PIECES, ON DOOR HOLDS GASKET. INCLUDES:
2)867690 TOP/BOTTOM BACKPLATE, 2)867699 SIDE
BACKPLATES 16)830569 SCREWS
LOCATED ON BACK OF DOOR TO HOLD THE DOOR
GASKET. INCLUDES 5)830569 SCREWS
54-1/4" L
LOCATED ON BACK OF DOOR TO HOLD THE
DOOR GASKET
873001
BACKPLATE, DOOR GASKET, TOP OR BOTTOM
26 5/8"
LOCATED ON BACK OF DOOR TO HOLD THE
DOOR GASKET
800501
BALLAST, LIGHT, 115V INTERIOR W/O IDL
LOCATED ON BACK OF DOOR TO HOLD THE DOOR
GASKET. INCLUDE 1) 867690 BACKPLATE, 4)830569
SCREWS
WAS A R2S40-TP
800508
800555
BALLAST, LIGHT, 115V, SIGN
BALLAST, LIGHT, 115V, SIGN/DOOR, T8 24K LAMP REPLACES THE REL-3P32SC, REL-3P32RH-TP AND
800565 QT3X32120IS-SC
BALLAST, LIGHT, INTERIOR, LAMP, 115V
FOR T-8 LAMP BEFORE 24K
800540
5"W X 4 1/4"H X 1 3/4"D CASE WITH FARENHEIT DIGITAL THERMOMETER,
SIZE
FOR FACTORY INSTALL ONLY. REQUIRES
METAL SIGN PANEL WITH CUT OUT FOR
ALARM SYSTEM.
USED AFTER 11/29/00 PRODUCTION DATE.
USED BEFORE 1/11/01 PRODUCTION DATE OR
APPROX. SER. NO. 1-2852822
907189
BASE, GASKET, PERIMETER STAINLESS,
HORIZONTAL, FOR COPPER CABINETS ONLY
LOCATED ON CABINET "NOT ON DOOR". TOP OR
BOTTOM PIECE THAT SURROUNDS DOOR OPENING.
THIS PIECE INSERTS INTO PERIMETER PLASTIC ( AND
COVERS PERIMETER HEATER WIRE ON SOME MODELS).
1 9/32" X 26 3/8"
LOCATED ON CABINET "NOT ON DOOR". TOP
OR BOTTOM PIECE THAT SURROUNDS DOOR
OPENING. THIS PIECE INSERTS INTO
PERIMETER PLASTIC ( AND COVERS
PERIMETER HEATER WIRE ON SOME
MODELS).
907190
BASE, GASKET, PERIMETER STAINLESS,
VERTICAL, ALUMINUM CABINETS ONLY
LOCATED ON CABINET "NOT ON DOOR". SIDE PIECE
ONLY THAT SURROUNDS DOOR OPENING. THIS PIECE
INSERTS INTO PERIMETER PLASTIC ( AND COVERS
PERIMETER HEATER WIRE ON SOME MODELS).
1 9/32" X 52 3/4"
LOCATED ON CABINET "NOT ON DOOR". SIDE
PIECE ONLY THAT SURROUNDS DOOR
OPENING. THIS PIECE INSERTS INTO
PERIMETER PLASTIC ( AND COVERS
PERIMETER HEATER WIRE ON SOME
MODELS).
841477
BASE, LAMPHOLDER/ LAMPSHIELD, IDL DOOR
L SHAPED PLASTIC BRACKET
2 3/8"
IF COOLER WAS PRODUCED BEFORE 12/99
PRODUCTION DATE NEW SCREW HOLES MAY
HAVE TO BE DRILLED AS THIS BASE HAS A
DIFFERENT SCREW HOLE CONFIGURATION.
812015
BEARING, NYLINER, SHELF
G4SM-23-RGS
832109
801016
801006
BEARING, THRUST, DOOR HINGE
BLADE, FAN MOTOR, CONDENSER, 134A
SYSTEM
BLADE, FAN MOTOR, CONDENSER, R-12 SYSTEM
861106
801452
832115
832106
810392
BLADE, FAN MOTOR, EVAPORATOR
BLOCK, COMPRESSOR MOUNTING
BLOCK, DOOR HINGE, BOTTOM
BLOCK, DOOR HINGE, TOP
BLOCK, SHELF (CLIPS GLASS SHELF TO RACK)
831503
BOLT, COMPRESSOR MOUNTING
830553
BOLT, FOR BOTTOM SHELF HINGE SHAFT
831513
863105
861860
BOLT, SKID
BOX, BALLAST BOX
BRACE, CABINET LEG, L SHAPED
HOLDS COOLER TO SKID
871687
BRACKET KIT, GRILL MOUNTING KIT
INCLUDES: 2)861838 END PIECES 8-1/2" LONG 4)842239
FASTENER STRIKE PLASTIC BRACKETS
874797
861944
BRACKET, CAPACITOR, GEAR MOTOR
BRACKET, CRATING, DOOR SUPPORT
HOLDS CAPACITOR
FITS UNDER DOOR. 9". REQUIRES THE 2)830566 SCREWS
PER DOOR...NOT INCLUDED
865417
872706
BRACKET, FAN MOTOR, CONDENSER
BRACKET, FAN MOTOR, CONDENSER, USE
865417
863476
BRACKET, FAN MOTOR, EVAPORATOR,
SHALLOW
BRACKET, FAN MOTOR, EVAPORATOR,
SHALLOW, USE 863476
872701
10" - 4 BLADE - 36 S
10" - 4 BLADE - 22 S
7 3/4" - 3 BLADE
TO MOUNT COMPRESSOR TO BASE. (ONE ONLY)
BLACK PLASTIC HOLDS SHELVES. INCLUDES SCREW TO
HOLD BLOCK TO SHELF.
5/16-18 X 1-1/2" ROUNDHD
CARRIAGE
1/4-20 X 1" HEX HEAD
LOCATED IN COMPRESSOR AREA IN CORNERS UNDER
TANK. IDL POWER CORDS FEED THROUGH HOLE IN
BRACE ON SOME MODELS.
SHALLOW: INCLUDES 1)863476 BASE.
870868
BRACKET, HINGE, DOOR, BOTTOM
INCLUDES: 1)907178 BRACKET, 2)830537 SCREWS
870867
BRACKET, HINGE, DOOR, TOP RIGHT OR LEFT
874796
874795
BRACKET, MOTOR, GEAR
BRACKET, SHELF, TOP, STAINLESS,
STATIONARY
BRACKET, SIGN FRAME CORNER, FOR FLAT
SIGN ASSEMBLIES
BRACKET, SIGN FRAME END USE 867848
FOR TORSION SPRING HINGE. INCLUDES 1)869630 HINGE
BRACKET WITH PIN, 2)830630 WASHERS, 2)830537
SCREWS
HOLDS GEAR MOTOR
811215
3-1/16" FLAT BEFORE FORMED. REQUIRES 1 PER
CORNER
METAL CORNER FOR PLASTIC EXTRUSION
BRUSH, CLEANING, CONDENSER COIL
WHITE POLYESTER WITH 2"WIDE WITH HANDLE
BUSHING, BACKSCREEN GUARD, 115V
BUSHING, BALLAST BOX
BUSHING, DOOR HINGE, BRASS
BUSHING, POWER CORD, IDL, ON GRILL
BUSHING, STRAIN RELIEF, IDL DOOR LIGHT
POWER CORD
BUSHING, STRAIN RELIEF, MAIN POWER CORD &
IDL DOOR LIGHT POWER CORD
811214
BUSHING, STRAIN RELIEF, POWER CORD, MAIN STRAIN RELIEF FOR MAIN POWER CORD
802114
CAPACITOR, START, 115V 60HZ R-12 & R-134A
1/2 HP
851110
851123
851134
881819
CAPILLARY TUBE, R-12
CAPILLARY TUBE, R-134A
CAPILLARY TUBE, R-134A
CASTOR, ONE 27" FRAME,TWO 4"
830255
CASTOR, ONE ONLY, 2-1/2", 1/2" STEM, W/BRAKE INCLUDES: 1) SHIM. WITH SILVER HOUSING. RAISES
CABINET APPROXIMATELY 3-1/2"
CASTOR, ONE ONLY, 2-1/2", 1/2" STEM, W/BRAKE INCLUDES: 1) SHIM. WITH BLACK HOUSING. RAISES
CABINET APPROXIMATELY 3-1/2".
830270
LOCATED IN COMPRESSOR AREA IN
CORNERS UNDER TANK. IDL POWER CORDS
FEED THROUGH HOLE IN BRACE ON SOME
MODELS.
SAME PART. WE ARE USING MFG. PART NO.
TO STANDARDIZE NUMBERS FOR NEW
ORACLE COMPUTER SYSTEM.
5 3/4"DIAMETER X 1/2"D
TO HOLD CORNERS OF EXTRUSION TOGETHER.
842231
811441
811210
832110
811209
832189
4 PER SKID
6"W 3-1/4"T
BRACKET, GRILL EXTRUSION
879213
10 14/32" X 10 14/32
BRACKET, FAN MOTOR, CONDENSER, USE MFG PART NO.
865417 TO STANDARDIZE FACTORY PART NUMBERS TO
PARTS PART NUMBERS.
872978
867848
3/8-16 X 3" HEX HD. TAP
5 3/4"DIAMETER X 1/2"D
872701 & 863476 ARE EXACT SAME PART.
CHANGE TO STANDARDIZE PART NUMBERS.
METAL BRACKET BENDS TO 90 DEGREE
ANGLE AND INSERTS INTO GRILL TRIM.
1 9/16" X 1 9/16" L SHAPED REQUIRES 1 PER CORNER
OPTION ONLY
1/2"
3/8" ID X 1/2" OD X 1"
3/8" HEYCO
1/2"
5/8"
USE BEFORE 10/9/02 PRODUCTION DATE.
USE AFTER 10/9/02 PRODUCTION DATE FOR
IDL DOOR LIGHT OR WHEN REPLACING IDL
POWER CORD PRODUCED BEFORE 10/9/02.
FOR COMPRESSOR AKA9441AXA (AK163AT) &
AKA4476YXA (AK169AT) AJA2430JXA (AJ530CT)
INCLUDES: 1)860746 FRAME WITH 1)830217 & 1)830216
CASTOR WELDED TO IT, 4)830535 SCREWS. RAISES
CABINET APPROXIMATELY 4 7/8"
8' X 0.046" ID
7' X 0.054" ID
12' X 0.064" ID
4" ON 27" FRAME
AFTER SER. NO. 1-1526829
BEFORE SER. 1-1526830
2-1/2"DIA X 1-3/4"W (1/2"-13 X WITH SILVER HOUSING
1" STEM)
2-1/2"DIA X 1-3/4"W (1/2"-13 X WITH BLACK HOUSING.
1" STEM)
G4SM-23-RGS
830254
830225
CASTOR, ONE ONLY, 2-1/2", 1/2" STEM, W/O
BRAKE
CASTOR, ONE ONLY, 2-1/2", 1/2"STEM, W/O
BRAKE
CASTOR, ONE ONLY, 4", 1/2" STEM, W/BRAKE
830224
CASTOR, ONE ONLY, 4", 1/2" STEM, W/O BRAKE
830221
CASTOR, ONE ONLY, 5", 1/2" STEM, W/BRAKE
830222
CASTOR, ONE ONLY, 5", 1/2" STEM, W/O BRAKE
830280
CASTOR, SET/4, 2-1/2" 1/2" STEM
830275
CASTOR, SET/4, 2-1/2", 1/2" STEM
879281
CASTOR, SET/4, 2-1/2", W/27" FRAME
INCLUDES: 2)912740 CASTOR ASSY WHICH IS A860746
FRAME WITH 1)830274 W/BRAKE & 1)830273 W/O BRAKE
CASTOR WELDED TO EACH, 8)830535 SCREWS. RAISES
CABINET APPROXIMATELY 3-3/8".
2-1/2"DIA (27" FRAME)
872063
CASTOR, SET/4, 3", W/27" FRAME
3"DIA (27" FRAME)
830277
CASTOR, SET/4, 4", 1/2" STEM
872010
CASTOR, SET/4, 4", 27" FRAMED
INCLUDES: 2)912741 CASTOR ASSY WHICH IS A 860746
FRAME WITH 1)830214 & 1)830215 CASTOR WELDED TO
EACH, 8)830535 SCREWS. RAISES CABINET
APPROXIMATELY 3-3/4".
INCLUDES: 1)830272 WRENCH AND 4)891336 SHIMS.
RAISES COOLER APPROXIMATELY 5-1/4".
INCLUDES: 2)912736 CASTOR ASSY WHICH IS 860746
FRAMES WITH 1)830217 & 1)830216 CASTOR WELDED TO
EACH FRAME, 8)830535 SCREWS. RAISES CABINET
APPROXIMATLEY 4 7/8".
830282
CASTOR, SET/4, 5", 1/2" STEM
861070
860100
CLAMP, COMPRESSOR
CLIP, EVAPORATOR DRAIN PAN
INCLUDES: WRENCH AND 4) SHIMS. RAISES CABINET
APPROXIMATELY 6-1/4".
HOLDS BASE TO CABINET FRAME
HOLDS DRAIN PAN IN PLACE. REQUIRES POP RIVET
802207
CLIP, POWER CORD, DOOR, IDL
SECURES GUARD TO FRONT WALL.
802259
CLIP, POWER CORD, DOOR, IDL
830301
830340
CLIP, SHROUD, CONDENSER COIL
CLIP/BUTTON, HANGING THERMOMETER
800601
800258
COIL, CONDENSER
COIL, EVAPORATOR
884986
COIL, EVAPORATOR ASSEMBLY
800113
COIL, FOR SOLENOID VALVE, 115V 60 HZ
881698
800154
COMPRESSOR PULL OUT
COMPRESSOR, 115V 60HZ, R-12 1/2HP
INCLUDES: OVERLOAD, RELAY, START CAPACITOR.
800131
COMPRESSOR, 115V 60HZ, R-12 1/2HP
INCLUDES: OVERLOAD, RELAY, START CAPACITOR.
842406
COMPRESSOR, 115V 60HZ, R-134A 1/2HP
INCLUDES: OVERLOAD, RELAY, START CAPACITOR. THIS
PART REPLACES 842017 PREVIOUSLY USED.
870102
CONDENSING UNIT, 115V 60HZ, R-12, 1/2HP
INCLUDES: COMPRESSOR WITH RUBBER MOUNTING
BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN
MOTOR, FAN BLADE, DRIER, CONDENSING COIL,
SHROUD, DRIER, POWER CORD ALL MOUNTED TO BASE.
875413
CONDENSING UNIT, 115V 60HZ, R-134A, 1/2HP
INCLUDES: COMPRESSOR WITH RUBBER MOUNTING
BLOCKS, RELAY, OVERLOAD, START CAPACITOR, FAN
MOTOR, FAN BLADE, DRIER, CONDENSING COIL,
SHROUD, DRIER, POWER CORD ALL MOUNTED TO BASE.
802179
CONNECTOR, TERMINAL, TEMPERATURE
CONTROL, BLUE
BLUE TERMINAL CONNECTORS FOR TEMPERATURE
CONTROLS. REQUIRES 2 PER CONTROL
830269
INCLUDES: 1) SHIM. WITH SILVER HOUSING. RAISES
2-1/2"DIA X 1-3/4"W (1/2"-13 X WITH SILVER HOUSING.
CABINET APPROXIMATELY 3-1/2".
1" STEM)
INCLUDES: 1) SHIM. WITH BLACK HOUSING. RAISES
2-1/2"DIA X 1-3/4"W (1/2"-13 X WITH BLACK HOUSING.
CABINET APPROXIMATELY 3-1/2"
1" STEM)
INCLUDES: 1) SHIM. RAISES CABINET APPROXIMATELY 5- 4"DIA (1/2"-13 X 1" STEM)
1/4".
INCLUDES: 1) SHIM.
4"DIA (1/2"-13 X 1" STEM)
INCLUDES: 1) SHIM. RAISES CABINET APPROXIMATELY 6- 5"DIA (1/2"-13 X 3/4" STEM)
1/4"
INCLUDES: 1) SHIM. RAISES CABINET APPROXIMATELY 6- 5"DIA (1/2"-13 X 3/4" STEM)
1/4"
INCLUDES: 1)830272 WRENCH AND 4)891336 SHIMS.
2-1/2"DIA X 1-3/4"W (1/2"-13 X
WITH SILVER HOUSING. RAISES COOLER
1" STEM)
APPROXIMATELY 3-1/2".
INCLUDES: 830263 WRENCH AND 4)891336 SHIMS. BLACK 2-1/2"DIA X 1-3/4"W (1/2"-13 X
HOUSING. RAISES COOLER APPROXIMATELY 3-1/2".
1" STEM)
4"DIA (1/2"-13 X 1" STEM)
4"DIA (27" FRAME)
OPTION
OPTION
OPTION. SILVER HOUSING. USE AFTER SER.
NO. 1-1538282
STANDARD OPTION. BLACK HOUSING. USE
AFTER SER. NO. 1-1538282
OPTION. BLACK HOUSING. FOR ANY SER.
NO.
OPTION. FOR ANY SERIAL NUMBER.
OPTION. USED AFTER SER. NO. 1-1538282.
OPTION. FOR ANY SERIAL NUMBER
5"DIA (1/2-13 X 3/4" STEM) OPTION
3-5/8" X 9-3/4"
3/4" X 2"
1/4"
USE AFTER 10/8/02 PRODUCTION DATE.
CORD WAS SMALLER IN DIAMETER AND
THESE PARTS WILL BE NEEDED TO REPLACE
CORD.
USE BEFORE 10/9/02 PRODUCTION DATE.
CORD WAS SMALLER IN DIAMETER AND
THESE PARTS WILL BE NEEDED TO REPLACE
CORD.
WHITE BUTTON THAT SECURES THERMOMETER TO WALL
OF CABINET.
WHITE BUTTON THAT SECURES
THERMOMETER TO WALL OF CABINET. USED
AFTER APRIL 2000
11" X 9 7/8" X 4"
15 1/4" X 8 3/4" X 5 13/32"
INCLUDES: 1)800230 COIL AND 1)13" 866742 CONTROL
SLEEVE EXTENDS OUT OF COIL APPROXIMATELY 5
INCHES
8 3/4" X 18 1/4" X 3 1/4"
USED BEFORE SER. NO. 1-1526830 FOR A
134A SYSTEM.
R-12 & R-134A USED AFTER SER. NO. 11526829
USED WITH 800111 VALVE
THREE WEEK LEAD TIME FROM 6/8/06...
G4SM-23-RGS
800386
CONTROL, TEMPERATURE, 115V
881825
CONTROL, TEMPERATURE, 115V RETROFIT KIT INCLUDES: 800386 TEMPERATURE CONTROL, 800182
COIL RELAY, 890353 RELAY COVER, WIRES 12"(2 BLACK/1
PINK/1 WHITE), 2)830592 SCREW FOR RELAY COVER,
2)831511 SCREW FOR RELAY, 1)811210 GROMMET,
INSTRUCTION SHEET
831932
CONTROL, TEMPERATURE, 115V/208V/220V CE
WILL RETROFIT THE 800393 WITHOUT RELAY OR 800306
800393
CONTROL, TEMPERATURE, 208V/220V/CE
REPLACE WITH 831932
INCLUDES: 2)801279 BLUE TERMINAL CONNECTORS,
KNOB, SCREWS
THIS CONTROL RETROFITS THE 800306)
9531N251; 800355) 9531N334 DOES NOT
REQUIRE RELAY.
800371
CONTROL, TEMPERATURE, HIGH ALTITUDE
INCLUDES: 2)802179 BLUE CONNECTORS, 2) SCREWS
AND KNOB.
115V USE AFTER 2/5/02 PRODUCTION DATE
AND MAY REQUIRE NEW 115V COIL RELAY.
208V/220V/220V CE THIS CONTROL
RETROFITS AND DOES NOT REQUIRE RELAY.
882132
CONTROL, TEMPERATURE, HIGH ALTITUDE, KIT, INCLUDES: 2)802179 CONNECTORS, 2) SCREWS AND
115V OPTION ONLY
KNOB, #7 SCREW DRIVER
115V USE BEFORE 2/1/02 PRODUCTION DATE
OR APPROX. SER. NO. 1-3241093.
831987
CONTROL, TEMPERATURE, RED
WINE/CHOCOLATE, 45 - 60 DEGREE
INCLUDES: 2)802179 CONNECTORS, 2) SCREWS AND
KNOB.
PURCHASED CALIBRATED TO 48.6 CUT OUT
AND 56.1 CUT IN
CONTROL, TEMPERATURE, RED
WINE/CHOCOLATE, 45 - 60 DEGREE, FACTORY
INSTALLED
CONTROL, TEMPERATURE, WHITE WINE, 45 - 50
DEGREE FAHRENHEIT
CONTROL, TEMPERATURE, WHITE WINE, 45 - 50
DEGREE FAHRENHEIT, FACTORY INSTALLED
INCLUDES: 2)802179 CONNECTORS, 2) SCREWS AND
KNOB.
PURCHASED CALIBRATED TO 48.6 CUT OUT
AND 56.1 CUT IN
831987-FI
800385
800385-FI
INCLUDES: 2)802179 BLUE CONNECTORS, KNOBS,
SCREWS
USE AFTER 2/5/02 PRODUCTION DATE AND
MAY REQUIRE NEW 115V COIL RELAY.
REPLACES THE 800393) 077B6827 CONTROL
USE BEFORE 2/5/02 PRODUCTION DATE.
INCLUDES: 2)802179 BLUE TERMINAL CONNECTORS, 2)
SCREWS AND KNOB.
INCLUDES: 2)802179 BLUE CONNECTORS, 2) SCREWS
AND KNOB.
801766
CORD, POWER, 11 FOOT, SPECIAL APPLICATION POWER CORD TO WALL OUTLET. INCLUDES THREE
PRONG PLUG
11 FOOT 14 GAUGE
801701
801706
CORD, POWER, 115V
CORD, POWER, COMPRESSOR, 115V
801742
CORD, POWER, DOOR, LEFT OR RIGHT HINGED, 6 WIRE CORD
IDL
108" 14 GAUGE
31" 16 GAUGE W/#10
EYELETS
20"
881619
CORD, POWER, DOOR, LEFT OR RIGHT HINGED, 6 WIRE CORD. INCLUDES 801742) 18" POWER CORD,
IDL, KIT
811410 STRAIN RELIEF BUSHING, 802202 CABLE CLAMP.
801771
CORD, POWER, MAIN CABINET, NO PLUG,
REMOTE COMPRESSOR MODELS
300 VOLT
860540
COVER, BALLAST BOX, 115V
ALL COUNTRIES BOTTLER COOLERS CHANGED 8/96
875900
COVER, EVAPORATOR COIL, BLACK ALUMINUM INCLUDES: COVER, PAN, INSULATION, DRAIN ELBOW,
FAN GUARD, TEMPERATURE CONTROL PLATE.
23 3/8" X 18"
881446
COVER, EVAPORATOR COIL, WHITE ALUMINUM INCLUDES: COVER, PAN, INSULATION, DRAIN ELBOW,
FAN GUARD, TEMPERATURE CONTROL PLATE.
23 3/8" X 18"
842494
COVER, OVERLAND AND RELAY, 1/2 HP UNITS,
115/208/220V
COVER, TEMPERATURE CONTROL, 220V CE
810391
POWER CORD TO WALL OUTLET, 15 AMP
2 RINGS AND ONE HORSESHOE CONNECTORS
18"
30"L 14 AWG
CAN BE USED WHENEVER CUSTOMER NEEDS
LONGER CORD.
SEND 881619 KIT FOR BEFORE 10/9/02
PRODUCTION DATE. SEND CORD ONLY
AFTER 10/9/02. DIAMETER OF CORD BECAME
LARGER. CUSTOMER WILL HAVE TO DRILL
HOLE 1/8" LARGER IN BOTTOM OF DOOR TO
39/64", REPLACE STRAIN RELIEF BUSHING,
CABLE CLAMP AND GRILL BUSHING.
USE BEFORE 10/9/02 PRODUCTION DATE.
CORD WAS SMALLER IN DIAMETER AND
THESE PARTS WILL BE NEEDED TO REPLACE
CORD.
UL REQUIREMENTS STIPULATE THAT
CABINETS UTILZED IN A REMOTE
REFRIGERATION SYSTEM MUST BE "HARD
WIRED" AT SITE.
11 25/32" X 3-1/8" X 17/32"
FOR 1/2HP COMPRESSORS
PLASTIC COVER TO KEEP PEOPLE FROM ADJUSTING
TEMPERATURES
OPTION FOR ALL VOLTAGES. PLASTIC
COVER TO KEEP PEOPLE FROM ADJUSTING
TEMPERATURES
G4SM-23-RGS
860198
COVER, TEMPERATURE CONTROL, BLACK
860602
COVER, TEMPERATURE CONTROL, WHITE
880231
861840
810619
810648
811115
876677
CRATE ONLY
CRATING DOOR SUPPORT BLOCK
CRAYON, BLACK
CRAYON, WHITE
DETECTOR, FREON LEAK
DOOR, LEFT HINGED, BLACK FRAMED,
115V/208V, IDL
876680
DOOR, LEFT HINGED, BLACK FRAMED, NON-IDL INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE,
SPRING, BRASS BUSHING
DOOR, LEFT HINGED, SILVER FRAMED,
INCLUDES: FRAME, 875147 GLASS INSERT, GASKET,
115V/208V, IDL, TWO LAMPS ON DOOR
HANDLE, SPRING, 2)801155 LAMPS, 2)801254 & 2)801230
LAMPHOLDER, 2)810873 LAMPSHIELD, 4)841477 END
CAPS, 801736 POWER CORD.
876679
FOR COOLERS WITH TOGGLE OR PUSH BUTTON LIGHT
SWITCH. HAS V SHAPED NOTCH TO SET TEMPERATURE.
DOES NOT INCLUDE SKID
STEP SHAPED
FOR TOUCH UP.
FOR TOUCH UP
VPE ULTRASONIC
INCLUDES: FRAME, 875147 GLASS INSERT, GASKET,
HANDLE, SPRING, 2)801155 LAMPS, 2)801254 & 2)801230
LAMPHOLDER, 2)810873 LAMPSHIELD, 4)841477 END
CAPS, 801736 POWER CORD.
7 1/2" X 4 1/8"
FOR COOLERS WITH TOGGLE OR PUSH
BUTTON LIGHT SWITCH. HAS V SHAPED
NOTCH TO SET TEMPERATURE.
7-1/2" X 4 1/8"
FOR COOLERS WITH TOGGLE OR PUSH
BUTTON SWITCHES
DOES NOT INCLUDE SKID
9"
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
885280
DOOR, LEFT HINGED, SILVER FRAMED,
115V/208V, IDL-SILVER, TWO LAMPS ON DOOR
INCLUDES: FRAME, 875147 GLASS INSERT, GASKET,
HANDLE, SPRING, 2)801155 LAMPS, 2)801254 & 2)801230
LAMPHOLDER, 2)810873 LAMPSHIELD, 4)841477 END
CAPS, 801736 POWER CORD.
26 5/8"W X 54 1/4"L
881013
DOOR, LEFT HINGED, SILVER FRAMED, NON-IDL INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE,
SPRING, BRASS BUSHING
DOOR, RIGHT HINGED, BLACK FRAMED,
INCLUDES: FRAME, 875147 GLASS INSERT, GASKET,
115V/208V, IDL
HANDLE, SPRING, 2)801155 LAMPS, 2)801254 & 2)801230
LAMPHOLDER, 2)810873 LAMPSHIELD, 4)841477 END
CAPS, 801742 POWER CORD.
26 5/8"W X 54 1/4"L
DOOR, RIGHT HINGED, BLACK FRAMED, NON-IDL INCLUDES: FRAME, GLASS INSERT, BACKPLATE, GASKET
SPRING, HANDLE
DOOR, RIGHT HINGED, GOLD FRAMED, NON-IDL INCLUDES: FRAME, GLASS INSERT, BACKPLATE, GASKET
SPRING, HANDLE
DOOR, RIGHT HINGED, SILVER FRAMED,
INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE,
115V/208V, IDL-BLACK
SPRING, 2)LAMPS, 4)LAMPHOLDER, 2)LAMPSHIELD,
POWER CORD.
DOOR, RIGHT HINGED, SILVER FRAMED,
INCLUDES: FRAME, GLASS INSERT, GASKET, HANDLE,
115V/208V, IDL-SILVER
SPRING, 2)LAMPS, 4)LAMPHOLDER, 2)LAMPSHIELD,
POWER CORD.
DOOR, RIGHT HINGED, SILVER FRAMED, NON- INCLUDES: FRAME, GLASS INSERT, BACKPLATE, SPRING,
IDL
GASKET, HANDLE
DRIER, COMPRESSOR
DRYER 5/16" & 3/8" INLET; 3/16 OUTLET
ELBOW, EVAPORATOR DRAIN/FLOOR DRAIN,
INCLUDES MALE AND FEMALE PART
PLASTIC, WHITE
ELECTRICAL ENCLOSURE FOR REMOTE CORDS METAL CASE FOR DUPLEX OUTLET
26 5/8"W X 54 1/4"L
876676
870650
870690
876678
885277
870638
800801
810208
802003
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
4 1/2"L
FOR REMOTE UNITS POWER CORD WILL RUN
FROM BALLAST BOX AND TERMINATE AT
GALVANIZED METAL ELECTRICAL
ENCLOSURE WHICH IS THIS PART.
876069
FRAME, DOOR, LEFT HINGED, BLACK, 115V/208V, INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
IDL
BUSHING, DOUBLE SIDED TAPE, LIGHT TRACK,
LAMPSHIELD, LAMP, LAMPHOLDERS, POWER CORD.
26 5/8"W X 54 1/4"L
880335
FRAME, DOOR, LEFT HINGED, BLACK, NON-IDL
25 5/8"W X 54 1/4"L
876071
885283
876072
876068
870240
870253
876070
INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
BUSHING, DOUBLE SIDED TAPE.
FRAME, DOOR, LEFT HINGED, SILVER,
INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
115V/208V, IDL-BLACK, TWO LAMPS ON DOOR
BUSHING, DOUBLE SIDED TAPE, LIGHT TRACK,
2)LAMPSHIELDS, 2)LAMPS, 4)LAMPHOLDERS, POWER
CORD.
FRAME, DOOR, LEFT HINGED, SILVER,
INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
115V/208V, IDL-SILVER, TWO LAMPS ON DOOR BUSHING, DOUBLE SIDED TAPE, LIGHT TRACK,
2)LAMPSHIELDS, 2)LAMPS, 4)LAMPHOLDERS, POWER
CORD.
FRAME, DOOR, LEFT HINGED, SILVER, NON-IDL INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
BUSHING, DOUBLE SIDED TAPE.
FRAME, DOOR, RIGHT HINGED, BLACK,
INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
115V/208V, IDL
BUSHING, DOUBLE SIDED TAPE, 2)LIGHT TRACK,
2)LAMPSHIELDS, 2)LAMPS, 4)LAMPHOLDERS, POWER
CORD.
FRAME, DOOR, RIGHT HINGED, BLACK, NON-IDL INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
BUSHING, DOUBLE SIDED TAPE.
FRAME, DOOR, RIGHT HINGED, GOLD, NON-IDL INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
BUSHING, DOUBLE SIDED TAPE.
FRAME, DOOR, RIGHT HINGED, SILVER,
INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
115V/208V, IDL-BLACK, TWO LAMPS ON DOOR
BUSHING, DOUBLE SIDED TAPE, LIGHT TRACK,
2)LAMPSHIELD, 2)LAMPS, 4)LAMPHOLDERS, POWER
CORD.
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
25 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
25 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
G4SM-23-RGS
885284
870218
870261
881214
FRAME, DOOR, RIGHT HINGED, SILVER,
115V/208V, IDL-SILVER, TWO LAMPS ON DOOR
INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
BUSHING, DOUBLE SIDED TAPE, LIGHT TRACK,
2)LAMPSHIELD, 2)LAMPS, 4)LAMPHOLDERS, POWER
CORD.
FRAME, DOOR, RIGHT HINGED, SILVER, NON-IDL INCLUDES: HANDLE, BACKPLATE, GASKET, SPRING,
BUSHING, DOUBLE SIDED TAPE.
FRAME, GLASS INSERT, SIDE & BACK
FRAME, SIGN, ASSEMBLY, BLACK, HINGED LEFT INCLUDES: TOP, BOTTOM AND SIDE PIECES.
26 5/8"W X 54 1/4"L
26 5/8"W X 54 1/4"L
26 3/4"W X 9 1/4"H X 3"D
USE BETWEEN 4/98 - 3/04 PRODUCTION DATE.
HAS CUTOUT FOR ROCKER SWITCH. BEFORE
THIS DATE SWITCH WAS IN THE GRILL
FRAME.
26 3/4"W X 9 1/4"H X 3"D
USED AFTER 3/04 PRODUCTION DATE.
RETROFITS OLDER CABINETS BY WIRING THE
842040 SWITCH IN SERIES WITH THE 801912
SWITCH
883240
FRAME, SIGN, ASSEMBLY, BLACK, HINGED LEFT INCLUDES: TOP, BOTTOM AND SIDE PIECES HAS TWO
HOLES FOR ROCKER AND MOMENTARY ROCKER
SWITCH. THE SWITCHES ARE WIRED IN SERIES.
871337
FRAME, SIGN, ASSEMBLY, BLACK, HINGED
RIGHT
INCLUDES: TOP, BOTTOM AND SIDE PIECES.
26 3/4"W X 9 1/4"H
USE BEFORE 4/98 PRODUCTION DATE. HAS
CUTOUT FOR ROCKER SWITCH. BEFORE
THIS DATE SWITCH WAS IN THE GRILL
FRAME.
871351
FRAME, SIGN, ASSEMBLY, BLACK, HINGED
RIGHT
INCLUDES: TOP, BOTTOM AND SIDE PIECES.
26 3/4"W X 9 1/4"H X 3"D
USE BETWEEN 4/98 - 3/04 PRODUCTION
DATE. HAS CUTOUT FOR ROCKER SWITCH.
BEFORE THIS DATE SWITCH WAS IN THE
GRILL FRAME.
883241
FRAME, SIGN, ASSEMBLY, BLACK, HINGED
RIGHT
INCLUDES: TOP, BOTTOM AND SIDE PIECES HAS TWO
HOLES FOR ROCKER AND MOMENTARY ROCKER
SWITCH. THE SWITCHES ARE WIRED IN SERIES.
26 3/4"W X 9 1/4"H X 3"D
USED AFTER 3/04 BUT RETROFITS OLDER
CABINETS BY WIRING THE 842040 SWITCH IN
SERIES WITH THE 801912 SWITCH
885443
FRAME, SIGN, ASSEMBLY, COPPER, HINGED
RIGHT
INCLUDES: TOP, BOTTOM AND SIDE PIECES HAS TWO
HOLES FOR ROCKER AND MOMENTARY ROCKER
SWITCH. THE SWITCHES ARE WIRED IN SERIES.
26 3/4"W X 9 1/4"H X 3"D
USED AFTER 3/04 BUT RETROFITS OLDER
CABINETS BY WIRING THE 842040 SWITCH IN
SERIES WITH THE 801912 SWITCH
871393
881215
FRAME, SIGN, ASSEMBLY, COPPER, HINGED
FOR COOLER WITH NO LOCK ON DOOR. INCLUDES: TOP,
RIGHT, FRONT
BOTTOM AND SIDE PIECES.
FRAME, SIGN, ASSEMBLY, GOLD, HINGED LEFT INCLUDES: TOP, BOTTOM AND SIDE PIECES.
26 3/4"W X 9 1/4"H X 3"D
USE BETWEEN 4/98 - 3/04 PRODUCTION
DATE. HAS CUTOUT FOR ROCKER SWITCH.
BEFORE THIS DATE SWITCH WAS IN THE
GRILL FRAME.
871344
FRAME, SIGN, ASSEMBLY, GOLD, HINGED RIGHT INCLUDES: TOP, BOTTOM AND SIDE PIECES.
26 3/4"W X 9 1/4"H X 3"D
USE AFTER 4/98 - 3/04 PRODUCTION DATE.
HAS CUTOUT FOR ROCKER SWITCH. BEFORE
THIS DATE SWITCH WAS IN THE GRILL
FRAME.
881216
FRAME, SIGN, ASSEMBLY, SILVER HINGED LEFT INCLUDES: TOP, BOTTOM AND SIDE PIE
26 3/4"W X 9 1/4"H X 3"D
USE AFTER 4/98 - 3/04 PRODUCTION DATE.
HAS CUTOUT FOR ROCKER SWITCH. BEFORE
THIS DATE SWITCH WAS IN THE GRILL
FRAME.
871349
FRAME, SIGN, ASSEMBLY, SILVER, HINGED
RIGHT
INCLUDES: TOP, BOTTOM AND SIDE PIECES.
26 3/4"W X 9 1/4"H X 3"D
USE AFTER 4/98 - 3/04 PRODUCTION DATE.
HAS CUTOUT FOR ROCKER SWITCH. BEFORE
THIS DATE SWITCH WAS IN THE GRILL
FRAME.
871390
FRAME, SIGN, END PIECE, BLACK LEFT
INCLUDES: 1)867579 BLACK PLASTIC END PIECE WITH 17
1/4" OF 820214 TAPE ON BACK, 2)830511
871389
FRAME, SIGN, END PIECE, BLACK RIGHT
8 5/8"
871392
FRAME, SIGN, END PIECE, STAINLESS LEFT
8 5/8"
871391
FRAME, SIGN, END PIECE, STAINLESS RIGHT
WITH 45 DEGREE ANGLE ONE ONE END
810862
810201
810202
810207
867587
GASKET, DOOR, MAGNETIC
GRILL EXTRUSION
GRILL EXTRUSION
GRILL EXTRUSION
GRILL EXTRUSION, BOTTOM PIECE
USED ON WALNUT OR PAINTED GRILLS
UESD ON WALNUT OR PAINTED GRILLS
USED ON WALNUT OR PAINTED GRILLS
PLASTIC TRIM ON ALL GRILLS EXCEPT STAINLESS
25 1/8"W X 54 1/8"L
1/2" PLASTIC X 78"
1/2" PLASTIC X 47"
1/2" PLASTIC X 54"
1/2" PLASTIC X 24-1/2"
867567
GRILL EXTRUSION, LEFT PIECE
PLASTIC TRIM ON ALL GRILLS EXCEPT STAINLESS
1/2" PLASTIC X 11-3/4"L
867570
GRILL EXTRUSION, RIGHT PIECE
PLASTIC TRIM FOR ALL GRILLS EXCEPT STAINLESS
1/2" PLASTIC X 11-3/4"L
881230
GRILL, ASSEMBLY, BLACK, FRONT, LEFT HINGED
DOORS
26 3/4"W X 9 1/4"H
8 5/8"
8 5/8"
26 3/4" W X 11 3/4" H
1/2" PLASTIC X 78"
1/2" PLASTIC X 47"
1/2" PLASTIC X 54"
PLASTIC TRIM ON ALL GRILLS EXCEPT
STAINLESS
PLASTIC TRIM
PLASTIC TRIM FOR ALL GRILLS EXCEPT
STAINLESS
G4SM-23-RGS
881231
879394
884686
874262
881764
881763
881234
881235
884619
884618
884620
881238
881239
874266
881236
GRILL, ASSEMBLY, BLACK, FRONT, RIGHT
HINGED DOORS
GRILL, ASSEMBLY, BLACK, REAR
GRILL, ASSEMBLY, COPPER, FRONT, RIGHT
HINGED DOORS
GRILL, ASSEMBLY, COPPER, REAR
GRILL, ASSEMBLY, RIPEN RAISEN PURPLE,
FRONT, LEFT HINGED DOOR
GRILL, ASSEMBLY, RIPEN RAISEN PURPLE,
FRONT, RIGHT HINGED DOOR
GRILL, ASSEMBLY, ROSEWOOD, FRONT, LEFT
HINGED DOOR
GRILL, ASSEMBLY, ROSEWOOD, FRONT, RIGHT
HINGED DOOR
GRILL, ASSEMBLY, STAINLESS, LEFT HINGED,
IDL, FRONT
RECESSED "NOT FRAMED"
GRILL, ASSEMBLY, STAINLESS, REAR
GRILL, ASSEMBLY, STAINLESS, RIGHT HINGED,
IDL
GRILL, ASSEMBLY, WALNUT VINYL, FRONT,
LEFT HINGED DOOR
GRILL, ASSEMBLY, WALNUT VINYL, FRONT,
RIGHT HINGED DOOR
GRILL, ASSEMBLY, WALNUT VINYL, REAR
RECESSED "NOT FRAMED"
26 3/4" W X 11 3/4" H
26 3/4" W X 11 3/4" H
26 3/4" W X 11 3/4" H
26 3/4" W X 11 3/4" H
26 3/4" W X 11 3/4" H
26 3/4" W X 11 3/4" H
26 13/16"L X 11 25/32"H
26 13/16"L X 11 25/32"H
26 3/4" W X 11 3/4" H
26 3/4" W X 11 3/4" H
879393
810203
GRILL, ASSEMBLY, WHITE, FRONT, LEFT HINGED
DOOR
GRILL, ASSEMBLY, WHITE, FRONT, RIGHT
HINGED DOOR
GRILL, ASSEMBLY, WHITE, REAR
NOT FRAMED
GROMMET, DRAIN ELBOW
872901
GUARD, FAN MOTOR, EVAPORATOR, WHITE
INCLUDES 1)860078 COVER AND 4)830592 SCREW
9 3/4" DIAMETER
901065
HANDLE KIT, DOOR, 10 OZ. CONTOUR COKE
BOTTLE
INCLUDES: 1)830122 HANDLE, 2)810383 SPACERS &
2)832292 SCREWS
7 7/8"L
HOLES DRILLED ON HANDLE AND DOOR 51/2" APART
879473
HANDLE KIT, DOOR, BLACK
INCLUDES: 1)810213 HANDLE, 2)810383 3/4" SPACERS,
2)832292 SCREWS
12" WITH 3/4" SPACERS
HOLES DRILLED ON HANDLE AND DOOR 81/8" APART
851217
HANDLE, DOOR, STAINLESS
INCLUDES: 1)851217 HANDLE, 2)810383 3/4" SPACERS
AND 2)832261 2 15/16" SCREWS
15" WITH 3/4" SPACERS
HOLES DRILLED ON HANDLE AND DOOR 81/8" APART
801814
HEATER, CONDENSATE PAN, 115V, ONE-PIECE
PAN/HEATER
ONE PIECE HEATER AND PAN WITH CIRCUIT BREAKER IN
POWER CORD. 160 WATT. REQUIRES A 801740 POWER
CORD ADAPTOR AND A METAL DRAIN PAN WITH HOLE
FOR HEATER TO SET IN. 160 WATT
12 1/2" X 4 3/4" X 2 3/4"D
NEW INSTALLATION IN FIELD VOIDS UL
APPROVAL. MUST BE FACTORY INSTALLED
FOR UL APPROVAL.
870865
HINGE KIT, DOOR, TOP, RIGHT OR LEFT
INCLUDES: 1)869630 HINGE BRACKET, 832110 BRASS
BUSHING, 832108 SHAFT, 832103 STOP PIN, 830630
WASHER, 2)830537 SCREWS.
865401
HOLDER, CONDENSATE DRAIN PAN WICKING
PAD, 21-3/4" CLEAR ALUMINUM
882671
875147
HOSE, EVAPORATOR DRAIN
INSERT, GLASS, DOOR, IDL MODEL
CUT FROM 810524 ROLL
INCLUDESTWO-WAY TAPE FOR INSTALLATION
7 FT, 1/2"ID, 5/8"OD
19 7/8"W X 51 5/8"L X 15/16" T
871103
INSERT, GLASS, DOOR, NON-IDL MODEL
INCLUDESTWO-WAY TAPE FOR INSTALLATION
24"W X 51 5/8"L X 15/16" T
871185
INSERT, GLASS, SIDE & BACK
INCLUDESTWO-WAY TAPE FOR INSTALLATION
20"W X 49 3/4"L X 15/16" T
820755
INSULATION, DRAIN PAN, EVAPORATOR
831307
880330
KEY, LOCK, BARREL, DOOR
KIT, START COMPONENT 115V 60HZ R-134A,
1/2HP, AKA4476YXA (AK169AT)
880982
KNOB, TEMPERATURE CONTROL, DANFOSS
831935
875548
KNOB, TEMPERATURE CONTROL, GE
KNOB, TEMPERATURE CONTROL,
RANCO/CUTLER HAMMER
LAMP, DOOR/INTERIOR, 115V/208V, IDL, T-8 24K THIS LAMP WILL RETROFIT T-8 801125 LAMP. INTERIOR
LAMP WOULD REQUIRE 801206 LAMPSHIELD TO
RETROFIT. IT DOES NOT RETROFIT THE 801132 LAMPS.
881237
801155
26 3/4" W X 11 3/4" H
26 3/4" W X 11 3/4" H
1 1/4"
SERVES AS A PROTECTION ONLY AROUND
HOLE CUT IN EVAPORATOR HOUSING FOR
DRAIN ELBOW. DOES NOT SERVE AS A
WASHER FOR SEALING DRAIN ELBOW.
21 3/4" X 1-1/16"
9 1/2" X 23"
INCLUDES 2 KEYS
FOR COMPRESSOR AKA4476YXA (AK169AT) INCLUDES:
802114 START CAPACITOR, 802210 OVERLOAD, 802113
RELAY
801101
LAMP, INTERIOR, 115V/208V, NON-IDL, T-12
THIS BULB HAS BLUE HUE
801104
801223
LAMP, SIGN 115V/208V, T-12
LAMPHOLDER, 115V/208V, INTERIOR/SIGN, NON- SPRINGLOADED (ONE)
IDL
48"
48"
24"
USED AFTER 11/29/00 PRODUCTION DATE.
G4SM-23-RGS
801224
801222
801264
LAMPHOLDER, 115V/208V, INTERIOR/SIGN, NON- STATIONARY (ONE)
IDL
LAMPHOLDER, 115V/208V/220V, SIGN
FLAT BI-PIN (ONE)
LAMPHOLDER, 115V/208V/220V, SIGN , T-8 24K SPRINGLOADED WITH 9" LEADS
801265
LAMPHOLDER, 115V/208V/220V, SIGN, T-8 24K
STATIONERY WITH 9" LEADS
STATIONERY. USED AFTER 11/28/00
PRODUCTION DATE.
842111
LAMPHOLDER, 115V/208V/220V/CE, IDL DOOR
FOR BOTTOM OR TOP OF DOOR.
115V/208V/220V USED BEFORE 12/6/00
PRODUCTION DATE. 220V CE STILL USED.
FOR BOTTOM OR TOP OF DOOR.
810873
LAMPSHIELD, 115V/208V/220V & CE, IDL
801206
830409
LAMPSHIELD, T12 LAMP, NON-IDL
LEG, ONE ONLY, 1/2" DIA. STEM
830437
LEG, ONE ONLY, 1/2" DIA. STEM, SEISMEC
830415
LEG, ONE ONLY, 1/2" STEM
872025
LEG, SET/4, 1/2" DIA. STEM
880348
SPRINGLOADED. USED AFTER 11/28/00
PRODUCTION DATE.
48 3/4"
INCLUDES: LAMPSHIELD AND TWO END CAPS
EXPOSED STEM. ADJUSTS FROM 6" TO 7-1/2". ZINC DIE
CAST
STAINLESS BOTH TOP AND BOTTOM PIECE. EXPOSED
STEM. USED TO BOLT COOLER TO FLOOR. ADJUST 6" TO
8". 3-1/2" DIAMETER BASE PLATE WITH 2) 7/16"HOLES
FOR BOLTS PLACED 2-1/2" CENTER TO CENTER.
46-1/4"L X 1 5/8"OD
6" (1/2-13 X 1" STEM)
FOR FRAMED STYLE LEG ASSEMBLY. ADJUSTS FROM 6"
TO 7-1/2". MADE OF ZINC DIE CAST.
ADJUSTS FROM 6" TO 7-1/2". MADE OF ZINC DIE CAST.
6" (1/2" FLUSH MOUNT)
LEG, SET/4, 1/2" DIA. STEM, SEISMEC
INCLUDES: 4)830437 LEGS. LEG HAS TWO HOLES IN
FOOT TO USE SCREWS TO SECURE TO FLOOR. LEGS
ADJUST FROM 6" TO 8". STAINLESS STEEL. 3-1/2"
DIAMETER BASE PLATE WITH 2) 7/16"HOLES FOR BOLTS
PLACED 2-1/2" CENTER TO CENTER.
6"
872001
LEG, SET/4, FRAME STYLE
OPTIONAL ANY SERIAL NUMBER INCLUDES: 2)913363
LEG BASES WHICH IS A860746 BASE WITH 2)830416
THREADED PLATES WELDED TO EACH. 4)830415 LEGS
ADJUSTS FROM 6" TO 7-1/2" ZINC DIE CAST, 8)830535
SCREWS.
6" (27" FRAME)
842194
LID, ELECTRICAL ENCLOSURE FOR REMOTE
UNITS
884966
LIGHT ASSEMBLY, 115V/208V/220V, LEFT SIDE OF INCLUDES: 1)906858 SILVER FILLER CHANNEL 1)906596
IDL DOOR, SILVER
FILLER CHANNEL CAP, 1)801230 & 1)801254
LAMPHOLDERS, 2)841477 LAMPHOLDER BASES. DOES
NOT INCLUDE LAMPSHIELD, LAMP OR POWER CORD.
800509
LIGHT STARTER, 115V/208V, SIGN LAMP
USED BEFORE 11/29/99 PRODUCTION DATES.
LIGHT BALLASTS WERE USED AFTER THIS
DATE.
884994
LOCK, DOOR, LEFT HINGE, FOR COPPER ALUM. INCLUDES: 1) 831315- TUMBLER, W/ 2 #1289 KEYS, LOCK
OR STAINLESS ENDS
NUT, AND SCREW, 2) 830552- SCREWS, 1) 891428- LEFT
CAM, 1) 907474 W/PIN- STRIKER PLATE LEFT, 1) 869583LOCK CAP
LOCK, DOOR, LEFT HINGE, FACTORY
INCLUDES: 1) 831315- TUMBLER, W/ 2 #1289 KEYS, LOCK
INSTALLED, FOR COPPER ALUM. OR STAINLESS NUT, AND SCREW, 2) 830552- SCREWS, 1) 891428- LEFT
ENDS
CAM, 1) 907474 W/PIN- STRIKER PLATE LEFT, 1) 869583LOCK CAP
LOCK, DOOR, LEFT HINGE, FACTORY
INCLUDES: 1) 831315- TUMBLER, W/ 2 #1289 KEYS, LOCK
INSTALLED, FOR VINYL END CABINETS
NUT, AND SCREW, 2) 830552- SCREWS, 1) 891428- LEFT
CAM, 1) 891418- STRIKER PLATE LEFT, 1) 869583- LOCK
CAP
LOCK, DOOR, LEFT HINGE, FOR VINYL END
INCLUDES: 1) 831315- TUMBLER, W/ 2 #1289 KEYS, LOCK
CABINETS, REGULAR GASKET
NUT, AND SCREW, 2) 830552- SCREWS, 1) 891428- LEFT
CAM, 1) 891418- STRIKER PLATE LEFT, 1) 869583- LOCK
CAP
LOCK, DOOR, RIGHT HINGE, FACTORY
INCLUDES: 1) 831315- TUMBLER, W/ 2 1289 KEYS, LOCK
INSTALLED FOR COPPER ALUM. OR SS ENDS
NUT, AND SCREW. 2) 830552- SCREWS, 1) 891429- CAM
RIGHT, 1) 908116 STRIKER PLATE RIGHT, 1) 869583- LOCK
CAP.
LOCK, DOOR, RIGHT HINGE, FACTORY
FOR LOCK INSTALLED IN FACTORY.
INSTALLED ONLY, FOR VINYL END CABINETS
FOR REPLACEMENT ONLY. NOT FOR AFTER
MARKET INSTALL.
LOCK, DOOR, RIGHT HINGE, FOR COPPER ALUM. INCLUDES: 1) 831315- TUMBLER, W/ 2 1289 KEYS, LOCK
OR SS ENDS
NUT, AND SCREW. 2) 830552- SCREWS, 1) 891429- CAM
RIGHT, 1) 907474 STRIKER PLATE WITH PIN RIGHT, 1)
869583- LOCK CAP.
LOCK, DOOR, RIGHT HINGE, FOR VINYL END
INCLUDES: 1) 831315- TUMBLER, W/ 2 1289 KEYS, LOCK
CABINETS, REGULAR GASKET
NUT, AND SCREW. 2) 830552- SCREWS, 1) 891429- CAM
RIGHT, 1) 891419- STRIKER PLATE RIGHT, 1) 869583- LOCK
CAP.
FOR REPLACEMENT ONLY. NOT FOR AFTER
MARKET INSTALL.
884994-FI
871851-FI
871851
884995-FI
872808-FI
884995
872808
6"
6" (1/2-13 STEM)
USED AFTER SER. NO. 1-1538282
USED TO BOLT COOLER TO FLOOR
FOR FRAMED STYLE LEG ASSEMBLY
USED AFTER SER. NO. 1-1538282.
OPTION
OPTIONAL ANY SERIAL NUMBER
POWER CORD WILL RUN FROM BALLAST BOX
AND TERMINATE AT GALVANIZED METAL
ELECTRIAL ENCLOSURE. THIS IS LID FOR
THE ENCLOSURE.
FOR REPLACEMENT ONLY. NOT FOR AFTER
MARKET INSTALL.
FOR REPLACEMENT ONLY. NOT FOR AFTER
MARKET INSTALL.
G4SM-23-RGS
864561
861191
LOUVER, GRILL, BLACK, ONE ONLY
LOUVER, GRILL, STAINLESS, ONE ONLY
25" X 3 1/4"
25" X 3 1/4"
USE AFTER 9/12/02 PRODUCTION DATE.
860712
LOUVER, GRILL, WALNUT, ONE ONLY
25" X 3 1/4"
USE AFTER 9/12/02 PRODUCTION DATE.
860493
LOUVER, GRILL, WHITE, ONE ONLY
25" X 3 1/4"
USE AFTER 9/12/02 PRODUCTION DATE.
800411
16 WATT. TURNS CLOCKWISE
800401
MOTOR, CONDENSER FAN, 115V 60HZ, R-134A
SYSTEM
MOTOR, EVAPORATOR FAN, 115V 60 HZ
9 WATT. TURNS CLOCKWISE.
FOR R-134A SYSTEM INCLUDES THE
SCREWS
INCLUDES SCREWS
800431
MOTOR, SHELF GEAR, 115V
INCLUDES FAN BLADE
THIS PART REPLACES PART 800419
820343
830912
801229
NAMEPLATE, TRUE
NUT, SKID
OUTLET/RECEPTACLE, COMPRESSOR POWER
CORD, 115V/208V/220V NON CE
800180
802192
802210
874655
810700
OVERLOAD, 115V 60HZ R-12 1/2HP
OVERLOAD, 115V 60HZ R-12 1/2HP
OVERLOAD, 115V 60HZ R-134A 1/2HP
PAD, WICKING (SET OF 5)
PAINT/INK, 12 OZ, SPRAY CAN, EVAPORATOR
COIL & SUCTION LINES
912539
PAN, DRAIN, CONDENSATE, BOTTOM, METAL
FOR DRAIN PAN HEATER
PAN, DRAIN, CONDENSATE, BOTTOM, METAL,
OPTIONAL
871902
3/8" X 16
LOCATED NEXT TO THE BALLAST BOX FOR
COMPRESSOR. LOCATED ON BACK OF CABINET AS
CONVENIENCE OUTLET ON SOME MODELS.
FOR COMPRESSOR AKA9434AXA (AK159AT)
FOR COMPRESSOR AKA9441AXA (AK163AT)
FOR COMPRESSOR AKA4476YXA (AK169AT)
SET OF 5)830920 PADS
USED TO RECOAT AN EVAPORATOR COIL OR SUCTION
LINE.
USE WITH ONE PIECE-DRAIN PAN HEATER. HAS HOLE IN
BOTTOM
810230
PAN, DRAIN, CONDENSATE, BOTTOM, PLASTIC
879459
PAN, DRAIN, EVAPORATOR
812025
PIN, PIVOT, TOP, SHELF HINGE SHAFT
832103
810266
PIN, STOP, DOOR HINGE
PLASTIC STRIP, JOINS CABINET END TO TANK
872910
811208
PLATE, TEMPERATURE CONTROL, W/O ROCKER HAS V-SHAPED NOTCH TO SET TEMPERATURE.
SWITCH HOLE, WHITE
PLUG, FOAM SHOT HOLE
812009
812008
877973
802113
PULLEY, GEAR MOTOR, SHELF
PULLEY, SHELF RACK
RAIL ASSEMBLY
RELAY, 115V 60HZ R-12 & R-134A 1/2 HP
HAS 3/4" CENTER HOLE
HAS 1/2" CENTER HOLE
800182
RELAY, TEMPERATURE CONTROL
FOR DANFOSS CONTROL
874654
RIVNUT TOOL, CASTOR OR LEG, 1/2" STEM
830926
830940
RIVNUT, CASTOR OR LEG, 1/2" STEM
RIVNUT, DOOR HANDLE, SWING
861087
830535
830538
SCREEN, CONDENSER FAN MOTOR
SCREW, CASTOR OR LEG, FRAMED STYLE; RAIL
ASSEMBLY TO CABINET
SCREW, COMPRESSOR BASE
COMPRESSOR BASE TO RAIL
830532
SCREW, DOOR HANDLE
LOCATED ON GRILL
REQUIRES 4 PER SKID
USED TO RECOAT AN EVAPORATOR COIL OR
SUCTION LINE.
22-1/8" X 7-1/2" X 1-1/2"
USE WITH ONE PIECE-DRAIN PAN HEATER
22-1/8" X 7-1/2" X 1-1/2"
DO NOT USE WITH PAN HEATER. IF USING
ONE PIECE DRAIN PAN HEATER USE PART
NUMBER 912539 WHICH IS A PAN WITH HOLE.
21 5/8"L X 7"W X 1 1/2"
LOCATED DIRECTLY BELOW COIL. INCLUDE: 864450 PAN
AND 810208 ELBOW
20 5/8"W X 9 9/16"
HOLD TOP HINGE SHAFT IN PLACE. MUST BE
POUNDED IN PLACE. IT IS SUGGESTED THAT
THE ENTIRE TOP RACK BE REPLACED.
KEEP TENSION ON DOOR SPRING.
5/8"L
54-1/2
NOT RECOMMENDED FOR REPLACEMENT.
7-1/2" X 4-1/8"
1 1/16"
LOCATED ON CABINET TO COVER PRE
PUNCHED HOLE WHERE FOAM IS SHOT IN.
AKA9434AXA (AK159AT) & AKA4460YXA (AK168AT)
AKA9441AXA (AK163AT) AKA4476YXA (AK169AT)
FOR DANFOSS 077B7633 CONTROL
1/2" X 13
1/2-13
10-24
GOES INTO THE DOOR HANDLE. USED AFTER
10/03 PRODUCTION
10" X 18"
1/4-20 X 3/4" IND HEX HD
1/4-14 X 1 1/2" HEX WASHER
HEAD
10-24 X 2-5/8" PHIL PAN HD USE BEFORE 7/30/03 PRODUCTION DATE FOR
BLACK HANDLE WITH RIVNUT. SILVER
HANDLE THIS PART IS STILL USED. STILL
USED ON COKE HANDLES
G4SM-23-RGS
832292
SCREW, DOOR HANDLE, BLACK
830592
SCREW, EVAPORATOR FAN MOTOR GUARD
830546
SCREW, EVAPORATOR HSNG.
830571
SCREW, FAN MOTOR BRACKET, CONDENSER
830509
SCREW, GRILL MOUNTING
830504
SCREW, GRILL MOUNTING, IDL LAMPHOLDER
BASE TO FILLER CHANNEL
830569
SCREW, GRILL TRIM, GASKET BACKPLATE
830537
SCREW, HINGE BRACKET, DOOR
832214
830408
SCREW, LAMPHOLDER TO LAMPHOLDER BASE
ON IDL'S
SCREW, LEVELING, ONE ONLY, 1/2" DIA. STEM
830412
SCREW, LEVELING, ONE ONLY, 3/8" DIA. STEM
872050
SCREW, LEVELING, SET/4, 1/2" DIA. STEM
872005
SCREW, LEVELING, SET/4, 3/8" DIA.STEM
RAISES CABINET FROM 5/16" MININUM TO 1-5/16"
MAXIMUM FROM FLOOR. INCLUDES: 4)830408 LEVELING
SCREWS
INCLUDES: 4)830412 LEVELERS
830558
SCREW, SHELF BLOCK
HOLDS BLOCK TO RACK.
830589
SCREW, SHELF RACK
LOCATED AT TOP & BOTTOM OF RACK EACH CORNER
REQ. 2
830566
830510
SCREW, SHROUD, CONDENSER COIL, SIGN
FRAME TO CABINET
SCREW, SIGN FRAME END PIECE, BLACK, FLAT
SIGN
SCREW, SIGN FRAME END PIECE, SILVER
830563
SCREW, TEMPERATURE CONTROL PLATE
832108
812006
SHAFT, DOOR HINGE
SHAFT, HINGE, SHELF RACK, BOTTOM
ROTATING BOTTOM HINGE SHAFT
USED AFTER 1/97 PRODUCTION DATE.
812007
SHAFT, HINGE, SHELF RACK, TOP
ROTATING TOP HINGE SHAFT
IT IS RECOMMENDED THAT THE ENTIRE TOP
SHELF RACK ASSEMBLY BE REPLACED. THIS
SHAFT HAS TO BE DRILLED AFTER IT IS
INSTALLED BECAUSE THEY ARE
INDIVIDUALLY DRILLED IN THE FACTORY
BEFORE YOU CAN INSTALL THE PIN.
872595
872594
SHELF RACK, BOTTOM
SHELF RACK, RIGHT OR LEFT
SCREW HOLES FOR SHELVES ARE 8-1/2" APART.
872593
812011
875302
SHELF RACK, TOP
SHELF ROTATING FLANGE UNIT
SHELF, GLASS
5 PER CABINET
811986
811987
875303
SHELF, GLASS
SHELF, MIRRORED GLASS
SHELF, MIRRORED GLASS
USED AFTER SER. NO. 1-1459537
872969
SHIM, CASTOR
FOR LEVELING STEMMED CASTOR DRAWING 891336
873015
812118
812115
812140
864609
874399
SHIM, DOOR GLASS
SHIM, GLASS INSERT, 1/4" THICK
SHIM, GLASS INSERT, 1/8" THICK
SHIM, GLASS INSERT, 3/16" THICK
SHIM, GLASS INSERT, DOOR
SHIM, HINGE DOOR
THIN - NO CHARGE ITEM
830511
10-24 X 2-19/32" PHIL PAN TO BE USED AFTER APPROX 7/30/03
PRODUCTION DATE OR HANDLE WITH
RIVNUT. (NOTE FROM 3/7/05 TILL 8/05 PARTS
WAS USING A 832260 SCREW THAT WAS 2
17/32"LONG WITH A 11/16" DOOR SPACER. IF
CUSTOMER SAYS THIS SCREW IS TOO LONG
A 3/4" SPACER MAY BE NEED.)
8-18 X 1/2" HEX SERRATED
HEAD
FOR DOOR CORD GUIDE CLIP, BALLAST BOX COVER AND 10-16 X 1/2" INDENTED HEX
EVAPORATOR HOUSING COVER
PIERCING
1/4-20 X 3/8" PHILLIPS
HOLDS FAN MOTOR BRACKET TO BASE
ROUND HEAD
6-18 X 1" PHILLIPS TRUSS
HEAD SMS 410SS
6-18 X 1/2" PHIL TRS HD 4 REQUIRED TO MOUNT GRILL TO CABINET.
8-18 X 3/4" PHIL FLAT HD
SELF TAPPING
1/4-20 X 1 1/4" IND HEX
HEAD THREAD CUT
6-32 X 1/4" SLTD PAN HD
RAISES CABINET FROM 5/16" MININUM TO 1-5/16"
MAXIMUM FROM FLOOR.
1/2"-13 X 1-1/2"
USED AFTER SER. NO. 1-1538282
3/8"-16 X 1-1/2"
USED BEFORE SER. NO. 1-1538283.
1/2"-13 X 1-1/2"
USED AFTER SER. NO. 1-1538282.
3/8"-16 X 1-1/2"
USED BEFORE SER. NO. 1-1538283.
6-32 X 3/8" SLOTTED FLAT HOLDS BLOCK TO RACK. NOT BLOCK TO
HEAD 18-8SS
GLASS SHELF
1/4-20 X 1" BUTTON HD
LOCATED AT TOP & BOTTOM OF RACK EACH
CORNER REQ. 2
8-18 X 1/2" PHILLIPS THIN
WAFER HEAD
6-18 X 1" BLACK PHILLIPS
FLT HEAD
6-18 X 1" PHILLIPS FLAT
HEAD
8-32 X 3/8" SLOTTED ROUND
HEAD
THICK - NO CHARGE PART
NO CHARGE PART 905244
50-1/2" L X 1-1/4"W
SCREW HOLES FOR SHELVES ARE 8-1/2"
APART. DRAWING 862674
19 5/8"
USED BEFORE SER. NO. 1-1459538
21 5/8"
21 5/8"
19 5/8" (1 PER CABINET)
ONE USED PER CABINET.
USED BEFORE SER. NO. 1-145953
7/8"W X 2-1/2"L X 1/4"T
7/8"W X 2-1/2"L X 1/8"T
7/8"W X 2-1/2"L X 3/16"T
.125 X .875 X 2 1/2"
NO CHARGE PART
NO CHARGE PART
NO CHARGE PART
G4SM-23-RGS
812177
SHIM, LIGHT FILLER CHANNEL, .090 THICK
USE EITHER 812177 OR 812176 SHIM DEPENDING ON
TOLERANCE FIT BETWEEN DOOR FRAME AND FILLER
CHANNEL. THIS PREVENTS THE IDL FILLER CHANNEL
FROM SLIPPING INTO THE DOOR FRAME.
.090 THICK X 1-1/2"L
812176
SHIM, LIGHT FILLER CHANNEL, .875 THICK
USE EITHER 812177 OR 812176 SHIM DEPENDING ON
TOLERANCE FIT BETWEEN DOOR FRAME AND FILLER
CHANNEL. THIS PREVENTS THE IDL FILLER CHANNEL
FROM SLIPPING INTO THE DOOR FRAME.
.875 THICK X 1-1/2"L
801501
801504
SHROUD, CONDENSER COIL
SHROUD, CONDENSER FAN MOTOR & BLADE
L SHAPED.
GOES OVER TOP CONDENSER SCREEN TO PROTECT
HANDS FROM GOING INTO FAN AREA. HALF CIRCLE
SHAPED
876453
875542
SKID
SPACER KIT, DOOR HANDLE, BLACK, SET/2
875543
810383
875587
SPACER KIT, DOOR HANDLE, SILVER
SPACER, DOOR HANDLE, BLACK
SPRING, HINGE, DOOR
842506
SURGE PROTECTOR 115V (OPTION)
HARDWIRE. PROTECTS COMPRESSOR ONLY.
There is little chance that the lighting would be
affected by power surges in U.S. Surge protectors
is what should be sold in the United States not a
voltage regulator.
801892
SURGE PROTECTOR 115V (RECOMMENDED
OPTION)
HARDWIRE. PROTECTS COMPRESSOR ONLY.
There is little chance that the lighting would be
affected by power surges in U.S. Surge protectors
is what should be sold in the United States not a
voltage regulator.
842250
SWITCH, LIGHT, TURN OFF ROTATING SHELF
105 DEGREE
MANUALLY, ROCKER STYLE, 115V/208V/220V/CE
REPLACES THE 842040 AS THE LIGHT SWITCH
AS OF 2005. THIS STOPS THE TURNING OF
THE SHELF EVEN WHEN DOOR IS CLOSED.
LOCATED ON BOTTOM SIDE OF SIGN FRAME
NEXT TO ROCKER SWITCH THAT STOPS
ROTATING ONLY WHEN DOOR IS OPEN.
801924
SWITCH, POWER, 115V
TO SHUT OFF POWER TO SERVICE.
TO SHUT OFF POWER TO SERVICE.
801912
SWITCH, ROCKER, 3 PRONG, STOPS/STARTS
SHELF REVOLVING.
THREE PRONG. ACTIVATES EVAPORATOR MOTOR WHEN
DOOR IS CLOSED. WHEN DOOR OPENS MOTOR SHUTS
OFF AND TURNS ON LIGHTS ON SOLID DOOR MODELS.
LOCATED ABOVE DOOR ON MOST MODELS. FRAME
SOLD SEPARATELY.
820279
820207
822205
TAPE, CABINET END REFURBISHING
TAPE, GLASS INSERT
THERMOMETER, DIGITAL, CELCIUS, 115V
EXTERIOR
TWO-WAY ADHESIVE TAPE
822205-FI
GOES OVER TOP CONDENSER SCREEN TO
PROTECT HANDS FROM GOING INTO FAN
AREA
SET OF 2)810383 SPACERS
3/4"
SET OF 2)905767 SPACERS
3/4"
3/4"
52 3/8"
TORSION STYLE, INCLUDES: 1)908313 SPRING, 2)832110
BRASS BUSHINGS
1" X 49'
3/8" X 36 YARDS
ROUND THERMOMETER WITH BUILT-IN TRANSFORMER
HAS BUILT IN TRANSFORMER. REQUIRES
SIGN PANEL WITH CUTOUT FOR
THERMOMETER.
THERMOMETER, DIGITAL, CELCIUS, 115V
EXTERIOR, FACTORY INSTALLED
FACTORY INSTALLED ON CABINET. ROUND
THERMOMETER WITH BUILT-IN TRANSFORMER
WITH BUILT IN TRANSFORMER. REQUIRES
SIGN PANEL WITH CUTOUT TO INSTALL.
831976-FI
THERMOMETER, DIGITAL,
CELSIUS/FAHRENHEIT, SOLAR
FACTORY INSTALLED ON CABINET. CAN SWITCH
CELSIUS TO FAHRENHEIT. RECTANGULAR SHAPED.
INCLUDES: FACE DECAL AND PROBE.
2-1/4" X 2-1/4"
FACTORY INSTALLED. THERE MUST BE
SUFFICIENT LIGHT TO MAINTAIN SOLAR
DISPLAY. IF LACK OF LIGHT A FACTOR USE
EITHER 831930-FI ELECTRONIC CELCIUS 220
V MODELS OR 800400-FI FARNEHEIT 115V
MODELS.
800400-FI
THERMOMETER, DIGITAL, FAHRENHEIT, 115V
EXTERIOR, FACTORY INSTALLED
FACTORY INSTALLED ON CABINET. ROUND
THERMOMETER WITH BUILT-IN TRANSFORMER
20DT-U-04FO
WITH BUILT IN TRANSFORMER. REQUIRES
SIGN PANEL WITH CUTOUT TO INSTALLATION.
800400
THERMOMETER, DIGITAL, FAHRENHEIT, 115V,
EXTERIOR
ROUND THERMOMETER WITH BUILT-IN TRANSFORMER
OPTION, REQUIRES SPECIAL SIGN PANEL
WITH CUT OUT HOLE.
G4SM-23-RGS
800321
800111
THERMOMETER, FAHRENHEIT/CELSIUS, TUBE
TYPE
TOOL, ADJUSTMENT, DANFOSS TEMPERATURE USED TO CALIBRATED DANFOSS CONTROL
CONTROL
VALVE, SOLENOID, REMOTE UNITS
SOLENOID BODY. with 115/1/60 coil.
812010
842216
V-BELT, MOTOR, SHELF
VOLTAGE REGULATOR 115V
830610
WASHER, COMPRESSOR MOUNTING
830656
WASHER, FOR BOTTOM SHELF HINGE SHAFT
830630
830631
830614
820712
830272
WASHER, HINGE, DOOR
WASHER, SKID
WASHER, SKID MOUNTING
WICKING KIT, CONDENSATE PAN
WRENCH, 2-1/2" CASTOR, NUT UNDER HOUSING
830271
WRENCH, 2-1/2" CASTOR, W/SILVER FRAME
830263
WRENCH, 2-1/2", 4", 5" CASTOR
FOR 8 SIDED NUT ON UNDERSIDE OF HOUSING.
CURRENT PRODUCTION
FOR 8 SIDED NUT ON UNDERSIDE OF
HOUSING. CURRENT PRODUCTION.
872904
WRENCH, DOOR HINGE, TORSION SPRING
FOR ADJUSTING SPRING TENSION
THIS IS A NO CHARGE ITEM
830442
WRENCH, LEG LEVELER
USED TO ADJUST HEIGHT OF LEVELER.
832270
STANDARD IN COOLER.
USED TO CALIBRATED DANFOSS CONTROL
3/8 OD
USE WITH 800113 SOLENOID VALVE COIL
PROTECTS THE COMPRESSOR AND ALL ELECTRICAL
PARTS
.875 OD X .344 ID X .063
THICK
1/4" SPLIT LOCK, SS
5/8"OD X 3/8ID ALUM
LOCKWASHER-1/2" SPLIT
LOCKWASHER
INCLUDES 5)831920 PADS & 1)865401 21-3/4"BAR
SMALL MOUTH. USE ON CASTOR WITH NUT UNDER
HOUSING.
FOR HEX SHAPED ABOVE HOUSING.
TO PREVENT BOLT FROM BECOMING LOOSE
DURING TRANSIT.
5/8"OD X 3/8ID ALUM
3/8" SPLIT
OPTION
USED AFTER 8/2000 (8/00 TO 3/01 COULD BE
EITHER)
Download PDF
Similar pages