installing a deca

©2012, SolidSignal.com
Reproduction is permitted as long as copyright information is intact.
installing a deca
The following receivers require DECA: HR20, HR21, HR22, HR23, H21, H23, THR22 (TiVo), R22
Some cables are shown longer than actual size. Use the coaxial and ethernet cables supplied for connection.
DIRECTV
CONNECTED HOME
ADAPTER
Satellite Line
If your receiver has two “Satellite in” ports,
connect DECA to “Satellite In 1”
If your receiver has two Ethernet ports,
connect DECA to “Ethernet 1”
SATELLITE IN 2
VIDEO/AUDIO OUT
USB
SATELLITE IN 1 (SWM)
PHONE
ETHERNET
1
HDMI
2
SATA
The layout of your receiver may vary slightly depending on model.
IN
OUT
BAND STOP
FILTER
Connect line from Band Stop Filter to Satellite In 1”
OUT
DC POWER PASS
HR20-100 ONLY:
DIRECTV
CONNECTED HOME
ADAPTER
Satellite Line
SATELLITE IN 2
Connect DECA to “Satellite In 2”
Connect DECA to “Ethernet 1”
VIDEO/AUDIO OUT
USB
SATELLITE IN 1 (SWM)
PHONE
ETHERNET
1
2
HDMI
SATA
Use a green-label splitter and band stop filter as shown to connect the DECA to the HR20-100.
project: Installing a DECA
date: July, 2012
©2012, SolidSignal.com
Reproduction is permitted as long as copyright information is intact.
Download PDF
Similar pages