Nutri Ninja®
Nutri Bowl™
NN100UK
Series
INSTRUCTIONS
ninjakitchen.eu
0800 862 0453
THANK YOU
for purchasing the Ninja® with Nutri Ninja® Nutri Bowl™
TIP: You can locate
the model number and
date code on the rating
label on the base of the
product.
RECORD THIS INFORMATION
Model Number: ��������������������������������������
Date Code: �����������������������������������������
Date of Purchase (Keep receipt): �����������������������
This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and
electronic equipment (WEEE).
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material sources. To return your used device, please use the return
and collection systems or contact the retailer where this product was purchased. They
can take this product for environmental safe recycling.
This appliance complies with the European directives for electromagnetic compatibility (EMC)
2014/30/EU and its revisions, as well as Low Voltage Directive (LVD) 2014/35/EU and its revisions.
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50/60Hz
Watts:1200W
Guarantee: This product is unconditionally guaranteed for one year against all defects of
workmanship and materials. This guarantee does not affect your statutory rights. If this product
proves unsatisfactory please contact our customer service department on freephone
0800 862 0453 or by e-mail ukservice@euro-pro.com.
ACCESSORY CAPACITY
Nutri Ninja® Cup:
Nutri Bowl: 650 ml & 900 ml
825 ml
PLEASE READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE.
These instructions are designed to help you get a complete
understanding of your new Nutri Ninja Nutri Bowl product.
If you have any questions, please call our customer service line
at 0800 862 0453.
1
0800 862 0453
n i n j a k i tc h e n . e u
2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic
safety precautions must always be followed, including the following numbered
warnings and subsequent instructions.
Important Safety Instructions������������������������������������������������������3
Getting to Know Your Ninja® with Nutri Ninja® Nutri Bowl™����7
Features��������������������������������������������������������������������������������������������9
Before First Use ����������������������������������������������������������������������������10
Using Your Nutri Ninja Cups �������������������������������������������������������11
Using Your Nutri Bowl™���������������������������������������������������������������� 15
Suggested Uses & Filling Instructions�������������������������������������� 19
Filling Your Nutri Ninja Cup �������������������������������������������������������������19
Ordering Replacement Parts�����������������������������������������������������������19
Care & Maintenance��������������������������������������������������������������������� 20
Cleaning ��������������������������������������������������������������������������������������������� 20
Storing������������������������������������������������������������������������������������������������� 20
Resetting the Motor Thermostat��������������������������������������������������� 20
Troubleshooting Guide���������������������������������������������������������������� 21
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and practice all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3 This product is provided with a quad
blade assembly. Always exercise care
when handling the quad blade assembly.
The quad blade assembly is sharp and
is NOT locked in place in its containers.
The quad blade assembly is designed to
be removable to facilitate cleaning and
replacement if needed. ONLY grasp the
blade assembly by the top of the shaft.
Failure to use care when handling the blade
assemblies will result in a risk of laceration.
4 ALWAYS exercise care when handling
the Pro Extractor Blades® Assembly. The
blades are sharp. ONLY grasp the Pro
Extractor Blades Assembly by the outer
perimeter of the blade assembly base.
Failure to use care when handling the blade
assembly will result in a risk of laceration.
5 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades that
can cause injury if mishandled.
6 Take inventory of all contents to ensure that
you have all parts needed to properly and
safely operate your appliance.
3
0800 862 0453
7 Unplug the appliance from the outlet
when not in use, before assembling or
disassembling parts, and before cleaning.
To unplug, grasp the plug by the body
and pull from the outlet. Never unplug by
grasping and pulling the flexible cord.
8 Wash all parts that may contact food
before use. Follow washing instructions
covered in this Instruction Guide.
9 To protect against the risk of electric shock,
DO NOT submerge the appliance or allow the
power cord to contact any form of liquid.
10 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
11 ln order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this
appliance must not be supplied through an
external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility.
12 DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
13 If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent, or similar qualified persons in order
to avoid a hazard.
CONTINUED ON PAGE 5
n i n j a k i tc h e n . e u
4
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage, basic
safety precautions must always be followed, including the following numbered
warnings and subsequent instructions.
14 Extension cords should NOT be used with
this appliance.
23Keep hands, hair, and clothing out of the
container when loading and operating.
15 Children shall not use or play with this
appliance. Close supervision is necessary
to keep appliance and cord out of the
reach of children during use
24ONLY use attachments and accessories
that are provided with the product or are
recommended by SharkNinja.
16 This appliance is NOT intended to be used
by people (including children) with reduced
physical, sensory, or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
17 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage is
suspected, contact SharkNinja to arrange
for replacement.
18 DO NOT attempt to sharpen blades.
19 DO NOT allow the cord to hang over the
edge of tables or counters. The cord may
become snagged and pull the appliance off
of the work surface.
20DO NOT allow the cord to contact hot
surfaces, including stoves and other
heating appliances.
21 ALWAYS use the appliance on a dry and
level surface.
22NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container (bowl,
pitcher, cup) and lid.
25During operation and handling of the
appliance, avoid contact with moving parts.
26DO NOT operate the appliance with an
empty container.
27DO NOT fill containers past the max fill or
max liquid lines.
28DO NOT microwave any containers or
accessories provided with the appliance.
29DO NOT perform grinding operations with
the Nutri Ninja® Cups and Pro Extractor
Blades® Assembly.
30Before operation, ensure that all utensils
are removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
31 Keep hands and utensils out of container
while chopping to reduce the risk of severe
personal injury or damage to the blender/
food chopper. A scraper may ONLY be
used when the food chopper is not running.
33DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
34NEVER leave the appliance unattended
while in use.
35DO NOT blend hot liquids. Doing so may result
in a pressure buildup and steam exposure that
can pose a risk of the user being burned.
36If you find unmixed ingredients sticking to
the sides of the pitcher, stop the appliance,
remove the lid, and use a spatula to dislodge
ingredients. NEVER insert your hands into
the pitcher, as you may contact one of the
blades and experience a laceration.
37 DO NOT attempt to remove the container
and lids from the motor base while the
motor and blade assembly is still spinning.
Allow the appliance to come to a complete
stop before removing lids and containers.
39Remove the Pro Extractor Blades® Assembly
from the Nutri Ninja® Cup upon completion of
blending. DO NOT store ingredients before or
after blending them in the cup with the blade
assembly attached. Some foods may contain
active ingredients or release gases that will
expand if left in a sealed container, resulting
in excessive pressure buildup that can pose a
risk of injury. For ingredient storage in the cup,
use only spout lid to cover.
40If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 30
minutes before using again.
41 The maximum wattage rating for this
appliance is based on the configuration of
the Pro Extractor Blades® Assembly and
Nutri Ninja Cup. Other configurations may
draw less power or current.
38Upon completion of processing, ensure
that the quad blade assembly is removed
BEFORE emptying bowl contents. The
quad blade assembly is to be removed by
grasping the top of the shaft and lifting from
the bowl. Failure to remove the quad blade
assembly before emptying the bowl results
in a risk of laceration.
32NEVER operate the appliance without lids
and caps in place. DO NOT attempt to
defeat the interlock mechanism. Ensure
that the container and lid are properly
installed before operation.
SAVE THESE INSTRUCTIONS
5
0800 862 0453
n i n j a k i tc h e n . e u
6
GETTING TO KNOW YOUR NINJA®
WITH NUTRI NINJA® NUTRI BOWL™
WELCOME!
Congratulations on
your purchase. Use
this Owner’s Guide to
learn about the great
features of your Ninja.
From assembly to use
to maintenance, you will
find it all in here.
B
D
E
A
C
There are a variety of
accessories that are compatible
with this blender series.
NOTE: The top flap of
your box shows the select
accessories that are included
with your model.
If you have any questions,
concerns or feedback, we’d
love to hear from you. Give us
a call at 0800 862 0453
To learn more about our
products and to find
great recipes, please visit
ninjakitchen.com
* 425 ml max liquid capacity.
F
MAIN UNIT
AMotor Base
G
BSpout Lid
C 650 ml Nutri Ninja Cup
H
I
DPro Extractor Blades® Assembly
E 900 ml Nutri Ninja Cup
F Nutri Bowl™ Lid
G Nutri Bowl*
H Quad Blade Assembly
I
7
0800 862 0453
Dough Blade Assembly
n i n j a k i tc h e n . e u
8
FEATURES
BEFORE FIRST USE
IMPORTANT: Review all
warnings on pages 4-6
before proceeding.
DID YOU KNOW?
• You can take your drinks
on the go using the Sip &
Seal® Lid or spout lid.
• All containers and lids are
BPA free.
• Our blades, containers and
lids are all dishwasher safe.
TART | STOP
S
Press once to start running continuously, press again to stop.
Timer counts up by seconds, up to 30 seconds. This button
can be pressed at any time if you wish to stop the program.
ULSE
P
Offers greater control of pulsing and blending. Operates only when
the PULSE button is pressed. Use short presses for short pulses.
Auto-iQ BOOST™
Adds time to any Auto-iQ program so you can control the
consistency of your recipes. The BOOST button toggles
between YES and NO: select BOOST YES for smoother,
creamier results; select BOOST NO for more texture.
Auto-iQ™ BLEND
Great for creamy, super-smooth drinks made from frozen
fruit, ice or dairy products.
uto-iQ EXTRACT
A
Ideal for hard, leafy, or fibrous whole fruits and vegetables,
including their skins, seeds, and stems.
Auto-iQ PUREE
Delivers the perfect speed and blending time for Nutri Bowl™
creations including smoothie bowls, savory bowls, dips, and
sauces.
uto-iQ CHOP
A
Timed pulses and pauses that produce consistent chopping
results for a range of recipes, including ingredient prep,
salsas, and ground meat. Press Auto-iQ CHOP to start; when
ingredients have reached your desired consistency, stop by
pressing either START/STOP or CHOP again.
Auto-iQ DOUGH
Takes all the guesswork out of creating perfect dough for
bread, pizza, and decadent desserts.
9
0800 862 0453
1 Remove all packaging materials from the appliance. Exercise care when unpacking blade
assemblies. All blade assemblies are sharp.
2 The quad blade assembly is NOT locked in place in its containers. Handle the quad blade
assembly by grasping the top of the shaft.
3 Handle the Pro Extractor Blades® Assembly by grasping around the perimeter of the blade
assembly base.
4 Wash containers, lids and blade assemblies in warm, soapy water using a dishwashing
utensil with a handle to avoid direct contact with the blades. Exercise care when handling
blade assemblies, as the blades are sharp.
5 Thoroughly rinse and air-dry all parts.
6 All attachments are dishwasher safe. It is recommended that the lids and blade assemblies
be placed on the top rack of the dishwasher. Ensure that blade assemblies are removed
from their containers before placing in the dishwasher. Exercise care when handling blade
assemblies.
7 Wipe the motor base with a clean, damp cloth.
n i n j a k i tc h e n . e u
10
USING YOUR NUTRI NINJA® CUPS
IMPORTANT: Review all
warnings on pages 4-6
before proceeding.
TIP: For recommended
filling instructions, check
out page 19.
NOTE: Auto-IQ™
programs have pauses
and changes in speed
throughout the cycle.
or
1 Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Ensure the motor base is
connected to power.
11
0800 862 0453
2 Add ingredients to the Nutri
Ninja Cup. DO NOT add
ingredients past the Max
Liquid line on the cup.
or
3 Install the Pro Extractor Blades® Assembly
onto the top of the cup. Twist the lid
clockwise until it’s sealed tightly.
4 Turn the Nutri Ninja® Cup upside down and
install onto the motor base. Align the tabs
on the cup with the slots on the base, then
twist until you hear a click. When the unit
is connected to power and the container is
correctly locked on to the motor base, the
program buttons will illuminate and the unit
is ready for use.
n i n j a k i tc h e n . e u
12
USING YOUR NUTRI NINJA® CUPS - CONT.
IMPORTANT: Review all
warnings on pages 4-6
before proceeding.
NOTE: Auto-IQ™ programs
have pauses and changes in
speed throughout the cycle.
5 Select the program that
best suits your recipe.
The Auto-iQ™ feature will
automatically stop the
appliance at the end of
the program. Non-AutoiQ settings will run for
30 seconds, after which
the appliance will stop
automatically. Pressing the
start button will allow the
product to restart and run
for another 30 seconds. To
pause the appliance at any
time, press the currently
active button a second
time. Reference page 9 for
program descriptions.
13
0800 862 0453
6 To remove the cup from the
motor base, turn the cup
counterclockwise and then
lift it off the motor base.
7 Remove the Pro Extractor
Blades® Assembly by
twisting the cap counterclockwise. Exercise care
when handling the blade
assembly, as the blades
are sharp.
8 Unplug the appliance
when finished and release
the motor base from the
work surface. To release
the motor base, gently
pull it toward you. Refer
to page 20 for storing
instructions.
9 To enjoy your drink on the
go, place the Sip & Seal®
Lid or spout lid onto the
Nutri Ninja® Cup and twist
clockwise until firmly sealed.
Do not store blended
contents with the Pro
Extractor Blades Assembly
attached. For storage, only
use the Sip & Seal Lid or
spout lid to cover.
n i n j a k i tc h e n . e u
14
USING YOUR NUTRI BOWL™
IMPORTANT: Review all
warnings on pages 4-6
before proceeding.
TIP: Select BOOST
YES for the smoothest,
creamiest results—ideal for
creamy dips like hummus.
Select BOOST NO when
a chunkier texture is
desired—perfect for dishes
like spinach & artichoke dip.
TIP: If the blade assembly
is not fully seated, you will
not be able to install and
lock the lid into position.
TIP: To learn more about
the unit’s programs, check
out page 9.
NOTE: DO NOT add
ingredients before
completing installation of
the blade assembly.
NOTE: For best results,
add wet ingredients
first and then add dry
ingredients.
15
0800 862 0453
1 Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Ensure the motor base is
connected to power.
2 Lower the bowl onto the
motor base.
3 To lock into place, rotate
Nutri Bowl™ to the left until
you hear a click.
4 Exercising care, grasp the
quad blade assembly by
the top of the shaft and
place it onto the drive gear
inside the bowl. Note that
the quad blade assembly
will fit loosely onto the
drive gear.
5 Add ingredients to the
bowl, making sure not to
overfill the bowl.
n i n j a k i tc h e n . e u
16
USING YOUR NUTRI BOWL™ - CONT.
IMPORTANT: Review all
warnings on pages 4-6
before proceeding.
NOTE: Auto-IQ™ programs
have pauses and changes in
speed throughout the cycle.
NOTE: Please follow the same
instructions for the dough
blade assembly.
6 Place the lid on top of the
bowl, aligning the triangle
symbol located on the lid
with the triangle symbol on
the top of the bowl. The
triangle symbols MUST
be aligned in order for
the lid to lock into place
and the appliance to
operate. When the unit is
connected to power and
the container is correctly
locked into the motor
base, the program buttons
will illuminate and the unit
is ready for use.
17
0800 862 0453
7 Select the program that
best suits your recipe.
The Auto-iQ™ feature will
automatically stop the
appliance at the end of
the program. Non-AutoiQ settings will run for
30 seconds, after which
the appliance will stop
automatically. Pressing the
start button will allow the
product to restart and run
for another 30 seconds.
To pause the appliance
at any time, press the
currently active button a
second time. Reference
page 9 for program
descriptions.
8 To remove the bowl from
the motor base, turn the
bowl counterclockwise
and then lift it off the
motor base.
9 Remove the lid by twisting
it counterclockwise and
lifting up. Always remove
the quad blade assembly
before emptying any of the
ingredients in the bowl. To
remove the quad blade
assembly, carefully grasp it
by the top of the shaft and
lift it out of the bowl.
10 Unplug the appliance
when finished and release
the motor base from the
work surface. To release
the motor base, gently
pull it toward you. Refer
to page 20 for storing
instructions.
n i n j a k i tc h e n . e u
18
SUGGESTED USES &
FILLING INSTRUCTIONS
CARE &
MAINTENANCE
IMPORTANT: Review all
warnings on pages 4-6
before proceeding.
ice,
frozen ingredients
liquids, yogurt
leafy greens,
herbs
fresh fruits,
vegetables
FILLING YOUR NUTRI NINJA® CUP
For best results, always follow recipe directions when filling
your Nutri Ninja Cups. When you’re not using a recipe, use the
following guidelines:
Start with fresh fruit or vegetables (for best results, cut
ingredients in 1-inch chunks). Next add leafy greens or herbs,
followed by any liquids like water, juice, milk, or yogurt. Then
add seeds, powders or nut butters. Lastly, add ice or frozen
ingredients. Remember to securely tighten the Pro Extractor
Blades® Assembly and don’t overfill the cup.
0800 862 0453
This appliance features a unique safety system
that prevents damage to the motor and drive
system should you inadvertently overload the
appliance. If the appliance is overloaded, the
motor will be temporarily disabled. Should this
occur, follow the reset procedure below.
3 Hand Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with the
blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
seeds, powders,
nut butters
19
RESETTING THE MOTOR THERMOSTAT
1 Separate all parts.
2 Wash all containers in warm, soapy water
with a soft cloth.
ORDERING
REPLACEMENT PARTS
To order additional parts
and attachments, please
visit ninjakitchen.eu or
contact customer service at
0800 862 0453.
CLEANING
1 Unplug the appliance from the
electrical outlet.
2 Allow the appliance to cool for
approximately 30 minutes.
Dishwasher
3 Remove the container lid and blade assembly.
All attachments are dishwasher safe. It is
Empty the container and ensure no ingredients
recommended that the lids, containers and
were jamming the blade assemblies.
blade assemblies be placed on the top rack
4 Reset the unit in accordance with the
of the dishwasher ONLY. Ensure that blade
applicable instructions for the container
assemblies are removed from their containers
and blade type.
before placing in the dishwasher. Exercise
IMPORTANT: Ensure that maximum
care when handling blade assemblies.
capacities are not exceeded. This is the
4 Wipe the motor base with a clean, damp
most typical cause of appliance overload.
cloth. Allow time to dry before operation.
If your unit needs servicing, please call
STORING
Customer Service at 0800 862 0453.
Insert the power cord into the storage area
underneath the motor base. Store the unit
upright and store all blade assemblies inside or
attached to their respective containers with their
lids locked into place.
DO NOT store blended or unblended
ingredients in the Nutri Ninja Cup® with the Pro
Extractor Blades® assembly attached.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside the
appliance or in a cabinet where they will not be
damaged or create a hazard.
n i n j a k i tc h e n . e u
20
TROUBLESHOOTING
GUIDE
NOTES
WARNING: To reduce the risk of shock and unintended operation, turn
power off and unplug unit before troubleshooting.
Unit doesn’t turn on.
• Make sure unit is plugged in.
• Display will read “--” once connected to power.
• Insert and rotate cup clockwise in base until it clicks. Programs will illuminate indicating that
your blender is ready for use.
Unit doesn’t turn off.
• Remove cup from base by rotating it counterclockwise and lifting it up. Display should turn off.
Unplug the power cord from the outlet.
Lid/Pro Extractor Blades® Assembly is hard to assemble.
• Set the cup on a level surface. Carefully place the lid or Pro Extractor Blades Assembly on the
top of the cup and align the threads so the lid/Pro Extractor Blades Assembly sits flat on the
cup. Twist clockwise until you have a tight seal.
Food is not evenly chopped.
• For best results when chopping, cut pieces down to even sizes and do no overfill the Nutri
Bowl™.
Doesn’t mix well; ingredients get stuck.
• Using the Auto-iQ™ programs is the easiest way to achieve great results. The pulses and
•
pauses allow the ingredients to settle toward the Pro Extractor Blades Assembly. If ingredients
are routinely getting stuck, adding some liquid will usually help.
When filling the cup, start with fresh fruit or veggies, then leafy greens or herbs. Next add
liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.
Unit moves on counter while blending.
• Make sure the counter and the suction feet of the unit are clean and dry.
Unit is difficult to remove from counter for storage.
• Tip unit forward from the back to disengage the suction feet.
21
0800 862 0453
n i n j a k i tc h e n . e u
22
Euro-Pro Europe Limited
15 Mariner Court
Calder Park
Wakefield
WF4 3FL
United Kingdom
0800 862 0453
ninjakitchen.eu
Illustrations may differ from actual product. We are constantly striving to improve
our products; therefore the specifications contained herein are subject to change
without notice.
Ninja, Nutri Ninja and Pro Extractor Blades are registered trademarks of Euro-Pro Europe
Limited.
Auto-iQ, Auto-iQ Boost and Nutri Bowl are trademarks of Euro-Pro Europe Limited.
© 2016 Euro-Pro Europe Limited
NN100UK_IB_160922
PRINTED IN CHINA
Download PDF
Similar pages