Philips CarStudio Car audio system CE151

Register your product and get support at
www.philips.com/welcome
CE151
EN
User manual
3
ES-AR
Manual del usuario
23
PT-BR
Manual do Usuário
51
=+7: Ԛ͂ʹ˫
=+&1 Ⴌ߀൱Ҭ
1 Important
Safety
Notice
2 Your car audio system
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
3 Get started
Install the car audio
Install remote control battery
Turn on
Select country/region
Set clock
4 Listen to radio
Tune to a radio station
Store radio stations in memory
Tune to a preset station
Turn MAX sound on/off
Select preset equalizer
Switch music listening zone
Other sound settings
4
4
4
6
6
6
7
8
18
18
18
18
8 Adjust system settings
19
19
19
19
19
19
19
20
BT mode
Turn beep sound on/off
Select blackout setting
Turn demo mode on/off
Dimmer
Dance
Reset
9
9
12
12
12
13
9 Additional information
13
13
14
14
Detach the front panel
Replace fuse
Remove the unit
21
21
21
21
10 Product information
22
11 Troubleshooting
23
23
About Bluetooth device
12 Glossary
24
5 Use bluetooth devices
14
Pairing bluetooth devices
14
Make a call
15
Call transfer
15
Receive call
15
Terminate call
15
Play from USB
Insert a card
Play options
Connect external sound source
16
16
16
16
17
7 Adjust sound
18
Adjust volume
18
Mute
18
Turn Dynamic Bass Boost (DBB) on/off 18
EN
3
Engl i s h
Contents
1 Important
Safety
Read and understand all instructions
before you use your apparatus. If damage
$"
"
the warranty does not apply.
This apparatus is designed for negative
ground (earth) 12 V DC operation only.
%
""
to a safe and comfortable level.
Improper fuses can cause damage or
&"
"
"
consult a professional.
Use only the supplied mounting hardware
for a safe and secure installation.
%
"
'
"
control batteries to rain or water.
Never insert objects into the ventilation
slots or other openings on the apparatus.
Clean the apparatus and frame with a
*"
cleaners on the apparatus.
Never place any objects other than discs
into the apparatus.
*
""+"
"""
or anti-static sprays intended for discs.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!
*
#
screen with any object.
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
4
EN
The apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
lighted candles).
Notice
The making of unauthorized copies of
!
""
"
"
"""""
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Windows Media and the Windows logo are
#
#
Microsoft Corporation in the United States
and/or other countries.
Recycling
Your product is designed and manufactured
$"
""
which can be recycled and reused.
When you see the crossed-out wheel bin
"
product is covered by the European Directive
2002/96/EC:
;
"
"$
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Engl i s h
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
<
"=>??@F@@F<G$
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
"
H
'J
polystyrene foam (buffer) and polyethylene
J
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
#"'"
old equipment.
L""
"
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2011 © Koninklijke Philips Electronics N.V. All
rights reserved.
EN
5
f ISO male connector
2 Your car audio
system
g Rubber cushion
h Screw x 1 pc
i Disassembly tools x 2 pcs
G
"
"
"
"
$
Z%
"
at www.philips.com/welcome.
j User manual
k Quick start guide
b
a
Introduction
&"!
""
your drive while listening to:
FM or AM (MW) radio
Audio from USB devices
Audio from your mobile phone
Audio from SD/SDHC card
Audio from external devices
The unit supports the following media format:
c
f
i
]
"#"$""
up a call on the audio system.
What’s in the box
Check and identify the contents of your
package:
a Main unit (with a sleeve)
b Remote control
c Front panel
d Trim plate
e Carrying case for front panel
6
EN
h
g
j
k
a
b
c
d e
p
f
o
n
r
a SOURCE
Select audio source.
b
/
c
Press to answer or redial a call.
Press to terminate call.
/
Return to previous menu.
Press and hold to transfer call.
m
l
k
Engl i s h
Overview of the main unit
g
j i h
q
d
/
Turn the unit on or off.
G
"
"
Mute or unmute sound.
Rotate to adjust volume.
e ZONE / MENU
Select tuner band.
Select MP3/WMA folder.
Switch music listening zone.
Access system menu.
EN
7
f MP3 LINK
Connect external audio device.
g
Unlock the panel.
h
USB socket.
i 6281'
Turn maximizing volume on or off.
View clock.
j DBB
Turn Dynamic Bass Boost (DBB)
sound on or off.
Access to tuner auto store.
k
Play.
Pause or resume play.
Select preset radio station No.6.
l REP / SHUF
Repeat play.
;_
Select preset radio station No.3/4.
m
/
Search for track/folder.
Select preset radio station No.1/2.
n
/
Tune for radio station.
Skip/search for track.
Fast forward/backward playback.
o DISP
Display current status.
Select the dimmer high or low.
p EQ / AUDIO
Select equalizer (EQ) setting.
Access audio setting menu.
q RESET
Restore default settings.
r SD card slot
Overview of the remote
control
a
b
c
d
e
f
a VOL +/
b
Adjust volume.
/
Select tuner band.
Scroll up/down menu.
Select MP3/WMA folder.
c
/
Tune to a radio station
Skip track.
Fast backward/forward playback
d SOURCE
Select audio source.
e EQ
Select equalizer (EQ) settings.
f OFF /
8
EN
/
Turn the unit on or off.
Mute or restore volume.
Note on the power supply lead (yellow)
Caution
Use the controls only as stated in this user
manual.
Always follow the instructions in this chapter in
sequence.
`
"
$#
model and serial number of your device. The
model number and serial number are on the
bottom of your device. Write the numbers
here:
Model No._____________________________
Serial No.______________________________
When you connect other devices to this
""
circuit is higher than the total fuse value
of all the connected devices.
Engl i s h
3 Get started
Notes on speaker connection
Never connect speaker wires to the
metal body or chassis of the car.
Never connect speaker wires with stripes
to one another.
Connect wires: ISO male connectors
Caution
Ensure that all loose leads are insulated with
electrical tape.
Install the car audio
These instructions are for a typical installation.
|
$
""
make the corresponding adjustment. If you have
"
"""
"#
"
your Philips car audio dealer.
Note
Consult a professional to connect CE151 as
instructed below.
1
Connect the supplied male connector to
the unit.
Caution
This unit is designed for negative ground
(earth) 12 V DC operation only.
Always install this unit in the car dashboard.
Other locations can be dangerous as the rear
of the unit heats up during use.
%
!H
""
ensure that the ignition is off.
Ensure that you connect the yellow and red
power supply leads after all other leads are
connected.
Ensure that all loose leads are insulated with
electrical tape.
Ensure that the leads do not get caught under
screws or in parts that will move (e.g.seat rail).
Ensure that all ground (earth) leads run to a
common ground (earth) point.
Use only the supplied mounting hardware for a
safe and secure installation.
`
"
&"
"
"
"
professional.
EN
9
2
f
Check the car’s wiring carefully and
connect them to the supplied male
connector.
g
L
Note
Front
Rear
R
Risk of danger! Please consult a professional to
perform the steps below!
Connector
ANTENNA
FRONT LINE OUT
R (Socket)
FRONT LINE OUT L
(Socket)
REAR LINE OUT R
(Socket)
REAR LINE OUT L
(Socket)
OE REMOTE
(Purple)
REAR AUX (Yellow)
1
2
3
4
1
e
Green/black
strip
White/black
strip
Gray/black
strip
Purple/black
strip
Red
f
Blue
g
Blue/white
h
i
Black
Yellow
2
3
4
Left speaker (Rear)
5
Left speaker (Front)
6
Right speaker (Front)
7
Right speaker (Rear)
Ignition key +12V DC
when ON/ACC
Motor/electric
antenna relay control
lead
L
"
lead
Ground
To the +12V car
battery which is
energized at all times
G
""""""
10
EN
Aux right/
left
Tip
The pin arrangement for the ISO connectors
depends on the type of vehicle you drive. Be
sure to make proper connections to prevent
damage to the unit.
Mount into the dashboard
1
If the car does not have an on-board
"
"
""
the negative terminal of the car battery.
3
Connect to
Antenna
Front right
speaker
Front left
speaker
Rear right
speaker
Rear left
speaker
OE Remote
If you disconnect the car battery in
a car that has an on-board drive or
"
"
may lose its memory.
2
`"
""
!"
bare wires do not touch each other.
Engl i s h
Ensure that car dashboard opening is
within these measurements:
3m
53.5 mm
18
m
m
5m
mm
53mm
183
3
4
5
Place the supplied rubber cushion over
the end of the mounting bolt.
6
Slide the unit into the dashboard until you
hear a click sound.
Remove the mounting sleeve with the
supplied disassembly tools.
Install the sleeve into the dashboard and
"
$
'
Note
`""
'
$#
EN
11
7
Reconnect the negative terminal of the
car battery.
Attach the front panel
1
Attach the trim plate.
Risk of product damage! When the remote
"
"
"
the batteries.
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
2
Insert the left side of the panel in the
chassis until it is correctly engaged.
3
Press the right side of the panel until it is
locked into place.
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
Turn on
%
""
"
Install remote control battery
Caution
Risk of explosion! Keep batteries away from
""
*
"
Risk of decreased battery life! Never mix
different brands or types of batteries.
press .
%
""
press and hold
turned off.
until the unit is
Select country/region
Note
;
"F
"
"
otherwise the unit can not work properly.
12
EN
Press to turn the unit on.
» [SELECT OPERATING REGION] is
displayed.
2
Rotate
3
to select an option:
[USA] (United States)
[EUR] (Western Europe)
[RUS] (Russia)
[AUS] (Australia)
[EAS] (Middle East)
[ASI]LJ
[JAP] (Japan)
[LAT] (Latin America)
Press
_
Rotate
Press
to set hour.
"
Rotate
Press
to set minute.
"
Set clock format
1
2
3
Tune to a radio station
1 Press SOURCE repeatedly to select radio
mode.
2
Press ZONE / repeatedly to select
band: [FM1][FM2][FM3][AM1]
[AM2] .
3
Press and hold
or
to tune to a
radio station manually.
» The radio station is broadcast.
"
Set clock
1 Press MENU repeatedly until current
2
3
4
5
4 Listen to radio
Engl i s h
1
» To search for a radio station
or .
Select tuner region
You can select suitable country/region of the
radio.
1
2
Press SOURCE to select radio mode.
3
Rotate
Press and hold MENU repeatedly until
[AREA] is displayed..
to select:
[USA] (United States)
[EUR] (Western Europe)
Press MENU.
[RUS] (Russia)
Press or repeatedly until [CLOCK
FORMAT] is displayed.
[AUS] (Australia)
[EAS] (Middle East)
Rotate
[ASI]LJ
to select a setting:
[CLOCK 12H]
[JAP] (Japan)
[CLOCK 24H]
[LAT] (Latin America)
View clock
Select tuner sensitivity
`""
"
MAX SOUND
until the clock is displayed.
To receive more radio stations or only
"$
""
"
tuner sensitivity.
Press any key to cancel the clock
display.
EN
13
1
Press and hold MENU repeatedly until
[LOCAL] is displayed.
2
Rotate
to select a setting:
[LOCAL ON] (local on): only
stations with strong signal can be
broadcast.
[LOCAL OFF] (local off): stations
with strong and weak signals can be
broadcast.
5 Use bluetooth
devices
&
""
#
if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
Store radio stations in
memory
You can pair your bluetooth device with the
unit as follows:
You can store up to six stations in each band.
Store stations automatically
1
2
`"
"
DBB until
[STORE - - -] is displayed.
Press "
» The six strongest stations of the
selected band are saved in the preset
channel automatically.
Note
€
"
"#
$
"
the [BT MODE] on the unit.
1
2
Turn on bluetooth function on your device.
3
4
Select “Philips” in the pairing list.
Store stations manually
1
Tune to a station that you want to store.
(see ‘Tune to a radio station’ on page 13)
2
Press a numeric button for three seconds.
» The station is saved in the selected
channel.
Tune to a preset station
1 Press ZONE / to select band.
2 Press the numeric button to select a
preset station.
14
EN
Search for other bluetooth devices that
can pair with your device.
Enter default password “0000”.
» [PAIR OK] is displayed on the panel if
pairing is successful.
» The paired device connect to the car
audio system automatically.
To disconnect the bluetooth
1
Press and hold MENU.
» [DISCONN] is displayed.
2
Press / .
» [DISCONN OK] is displayed if
disconnection is successful.
To connect the bluetooth
1
Press and hold MENU.
» [CONNECT] is displayed.
2
Press / .
» [WAIT] is displayed.
» [FAILED] is displayed if connection is
failed.
Receive call
1 `"
"
"
number is displayed.
Make a call
Engl i s h
» [CONNECTED] is displayed if
connection is successful.
2
if the incoming call has no phone
"[PHONE IN] is displayed.
Press
to answer/accept the call.
Note
%
#"
"
""
bluetooth connection between the unit and
the phone must be active.
Terminate call
Press and hold
to terminate call.
You can dial number through the mobile phone.
To make call through the mobile phone.
1
2
Use the Mobile Phone to dial and make
an outgoing call.
"
"[CALL] is
displayed.
To redial number.
1
2
bluetooth devices
You can listen to audio from a bluetooth device
and control playback with the unit.
Press SOURCErepeatedly to select [BT
AUDIO].
Press
.
» [REDIAL] is displayed.
Press / again.
» [CALL] is displayed and the unit starts
dialing the number dialed last time.
Call transfer
%
.
Note
;
"
#
no need to start play manually.
Some mobile phone needs to open the Media
$#
%
again.
%
#F
$"
/
.
You can transfer voice from loudspeaker to
mobile phones during call.
Press and hold until [TRANSFER] is displayed.
» Voice transfers from loudspeaker to
mobile phone.
EN
15
6 Play audio files
Play from USB
Note
Ensure that the USB device contains playable
music.
Insert the USB device
1
Slide the USB socket cover marked
to the left.
2
Insert the USB device into the USB
socket.
» The unit starts to play from the USB
device automatically.
Remove the card
1
2
Press
3
Remove the card.
to turn the unit off.
Press the card until you hear a click.
» The card is now disengaged.
Play options
%
%
%
#
F"'#
/
.
To search backward/forward rapidly
$""#
/
for 3 seconds.
Remove the USB device
1
2
Press
to turn the unit off.
Remove the USB device.
Insert a card
.
again.
Search for an MP3/WMA track
Search within the current folder
Note
1
Press .
» The name of the current track is
displayed.
2
Rotate
folder.
3
Press
This unit supports SD and SDHC cards.
1
2
3
Insert the card into the card slot.
16
EN
Press
to release the panel.
Close the front panel.
» The unit starts playing from the card
automatically.
to select anther track in current
"
1
2
3
2
Press .
» The name of the current folder is
displayed.
Rotate
to navigate through all folders.
Press to access the selected folder.
» %""
"
from the selected folder automatically.
Tip
%
#
.
Rotate
to select a setting:
[SHUF FLD]: start random play for
all tracks in the current folder.
[SHUF ALL]: start random play for
all tracks.
[SHUF OFF]: turn off random play.
Engl i s h
Search in other folder
Connect external sound
source
1 Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2
Press SOURCE repeatedly until [MP3
LINK] is displayed.
3
Operate the external component (refer
to the instructions supplied with the
external component).
View play information
=""DISP repeatedly to view:
Track number and elapsed play time
Folder
File
Album
Artist
Title
Repeat play
1
="REP.
» [REP] is displayed.
2
Rotate
[REP TRK] (repeat one track): play
current track repeatedly.
[REP FLD] (repeat a folder): play all tracks
in the current folder repeatedly.
[REP ALL] (repeat all tracks): play all
tracks repeatedly.
to select a setting.
You can play the tracks in random order:
1
="SHUF.
» [SHUF] is displayed.
EN
17
7 Adjust sound
Adjust volume
Turn clockwise/counterclockwise to increase/
decrease volume.
[FLAT]_J
[POP] (pop)
[USER] (user)
[TECHNO] (techno)
[ROCK] (rock)
[CLASSIC] (classic)
[JAZZ] (jazz)
[OPTIMAL] (optimal)
Mute
You can turn off the sound of your audio.
Switch music listening zone
=" .
Philips’ innovative Zone technology enables
driver or passengers to enjoy music with the
best speaker balance and experience more vivid
spacial effects as the artist is intended to create.
You can switch the music listening zone from
driver to passengers for the best speaker sound
settings in car.
%
"
again.
Turn Dynamic Bass Boost
(DBB) on/off
1 Press DBB and the current setting is
displayed:
» [DBB ON] : the Dynamic Bass Boost
(DBB) function is on.
» [DBB OFF] : the DBB function is off.
2
Press and hold ZONE.
» The current setting is displayed.
2
Rotate
Press DBB again to change the DBB
setting.
Turn MAX sound on/off
1 Press 6281'.
2
1
[ALL]
[FRONT -L] (Front left)
[FRONT -R] (Front right)
[FRONT]
» The current setting displays
Other sound settings
» [MAX ON]: the maximum sound
(MAX sound) function is on.
You can also adjust the preset EQ / AUDIO
settings.
» [MAX OFF]: the maximum sound
function is off.
1
2
Press
6281'
again to select an option.
Select preset equalizer
1 Press EQ / AUDIO.
Press EQ / AUDIO for three seconds.
Press or repeatedly to select the
item to be adjusted:
[BAS] (bass) range: -7 to +7.
[TRE] (treble) range: -7 to +7.
[BAL] (balance) range: 12L to 12R. (L
ƒ#„ƒ#J
[FAD] (fader) range: 12R to 12F. (R =
#€ƒ
"#J
» Current Equalizer setting is displayed.
2
18
to select a setting:
Press EQ / AUDIO again to select a
preset EQ setting:
EN
3
Rotate
to select a value.
BT mode
1 Press and hold MENU.
2 Press or repeatedly until [BT
MODE] (bluetooth mode) is displayed.
3
Rotate
[BT ON]: turn the bluetooth on.
[BT OFF]: turn the bluetooth off.
[BKO 20 S] : turn the screen off
automatically 20 seconds after last
operation.
[BKO OFF] : never turn the screen
off.
Turn demo mode on/off
1 Press and hold MENU.
2 Press or repeatedly until [DEMO] is
displayed.
» The screen shows current demo mode
setting.
to select a setting:
3
Rotate
[DEMO ON] : turn the demo mode
on. When the unit is idle for more
"?
""
"
displayed.
[DEMO OFF] : turn the demo mode
off.
Turn beep sound on/off
<
""
You can turn the beep sound on/off.
1
2
Press and hold MENU.
3
Rotate
Press or
displayed.
repeatedly until [BEEP] is
to select a setting:
[BEEP ON]: turn on the beep sound.
[BEEP OFF]: turn off the beep
sound.
to select a setting:
Dimmer
1 Press and hold MENU.
2 Press or repeatedly until [DIMMER]
is displayed.
3
Select blackout setting
Rotate
to select a setting:
[DIMM HIGH] (dimmer high)
[DIMM LOW] (dimmer low)
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
Dance
1
2
You can turn on or off the spectrum on the
LCD display.
3
Press and hold MENU.
Press
/
displayed.
Rotate
repeatedly until [BKO] is
to select a setting:
[BKO 10 S] : turn the screen off
automatically 10 seconds after last
operation.
1
2
Press and hold MENU.
Press or repeatedly until [DANCE]
is displayed.
EN
19
Engl i s h
8 Adjust system
settings
3
Rotate
to select a setting:
[DANCE ON] : turn the spectrum
on.
[DANCE OFF] : turn the spectrum
off.
Reset
You can reset the unit to its default setting.
1
2
Detach the front panel.
Press the reset button by using a ballpoint pen or a similar tool.
» Preset adjustments such as preset
channels and sound adjustments are
erased.
RESET
20
EN
3
Replace the fuse.
Engl i s h
9 Additional
information
Detach the front panel
You can detach the front panel to deter theft.
1
2
3
4
Press
to release the panel.
Push the left side of the panel rightward.
Pull the panel towards you to disengage it
from the chassis.
Store the panel in the supplied carry case
to protect it from dirt or damage.
Note
`"$"
be an internal malfunction. Consult your Philips
dealer.
Remove the unit
You can remove the unit from the dashboard.
1
2
Detach the front panel and the trim plate.
Pull out the unit by using the disassembly
tools.
Replace fuse
`
1
2
Check the electric connection.
Buy a fuse that matches the voltage of the
damaged fuse.
EN
21
10 Product
information
Compatible USB devices:
†;]_
H†;]
with interface reading all speed
>?J
†;]_H†;]
$
interface reading all speed support
>?J
Memory cards (SD / SDHC)
Note
Product information is subject to change
without prior notice.
Supported formats:
Power supply
Fuse
Suitable speaker
impedance
Maximum power output
Continuous power
output
Pre-Amp output voltage
Aux-in level
Dimensions (W x H
x D)
Weight
12 V DC (11 V
!@ˆJ"
ground
15 A
4-8
50 W x 4 channels
22 W x 4 RMS (4
10% T.H.D.)
2.5 V
500 mV
182 x 52 x 144.7
mm
0.86 kg
Radio
†;]
H€L%@
FAT32
MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
&‡Lˆ‰ˆŠˆ‹ˆŒ‘‘>J
Supported sampling frequencies:
‰‰#|+‰‹#|+
Directory nesting up to a maximum
of 8 levels
Number of albums / folders: USB or
memory maximum 99
*
#FFH†;]
or memory maximum 999
ID3 tag v2.0 or later
Unsupported formats:
Frequency range 87.5 - 108.0 MHz (100kHz
- FM
per step in auto search and
50kHz per step in manual
search)
Frequency range 522 - 1620 KHz (9 kHz)
- AM (MW)
530 - 1710 kHz (10 kHz)
Usable sensitivity 8 μV
- FM
Usable sensitivity 30 μV
- AM(MW) (S/N
= 20 dB)
Empty albums: an empty album is an
album that does not contain MP3/
&‡L""
$""
display.
†"
#€
'&
"
J
‡’$
extension .dlf are ignored and not
played.
LLG&LˆG‡
=„‡
&‡L$
‰‰‰J
&‡L"
Bluetooth
Output power
Frequency band
Range
Standard
22
EN
0 dBm (Class 2)
2.4000 GHz - 2.4835 GHz
ISM Band
3 meters(free space)
]
>?
"
Caution
Never remove the casing of this device.
%
#$""
the system yourself.
If you encounter problems when using this
#
$"
"
requesting service. If the problem remains
"
$$$$
F
J&"
"
ensure that your apparatus is nearby and the
model number and serial number are available.
No power or no sound.
Car engine is not on. Turn the car engine
on.
Cable is not connected properly. Check
connections.
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
`
"""
the RESET button.
Ensure that the track played is of a
compatible format.
Noise in broadcasts.
Signals are too weak. Select other
stations with stronger signals.
Check the connection of the car antenna.
Change broadcast from stereo to mono.
Preset stations lost.
Battery cable is not connected correctly.
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
USB data error. Check the USB device.
Display show ERR-3
USB/SD data error.
About Bluetooth device
Cannot pair the Bluetooth enabled device
with the car audio system.
%
"
required for the system.
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device for how to enable the function.
The audio quality is poor after connection
with a Bluetooth-enabled device.
The microphone is not correctly
positioned. Adjust the position of the
"€
'#
microphone onto the dashboard where
close to the driver.
The Bluetooth reception is poor. Move
the device closer to the car audio system
or remove any obstacle between the
device and the system.
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used with the system to
play music.
The paired mobile phone connects and
disconnects constantly.
The Bluetooth reception is poor. Move
the mobile phone closer to the car audio
system or remove any obstacle between
the mobile phone and the system.
Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
€
"]
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
EN
23
Engl i s h
11 Troubleshooting
12 Glossary
M
MP3
L
$
"
"
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
‘’&‡’
"G=!„
CD-RW can contain about 10 times more
data than a regular CD.
S
SD
Secure Digital. A type of memory card with a
_
SDHC
Secure Digital High Capacity (SDHC) is a
_
";=L
>??
"%;=L>??
"
enables SD cards to reach higher capacities
‰”]
’>”]"
$"
W
WMA (Windows Media Audio)
L"
$"‡
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
&"
$‡ˆ
"
"
"
"&"
$‡L
encoding technology.
24
EN
᥽̻Ճሙ
1DPHRIWKH
3DUWV
ఙർఙࠂྠ᠂ਾϾዼ
+D]DUGRXVWR[LF6XEVWDQFH
ధ
3E/HDG
‫܌‬+J
ᬄ&G
੆ࡒ۴&KURPLXP ‫أ‬ᜌ৷Ъ
‫أ‬ᜌ‫ف‬Ъ૚
0HUFXU\
FDGPLXP
3%%
3%'(
+RXVLQJ
ທक़
2
2
2
2
2
2
'9'&'ORDGHU
'9'&'ܿ‫ދ‬
;
2
2
2
2
2
/&'3DQHO
၅ࣚ૯ϴ
;
;
2
2
2
2
3:%V
‫׌‬੢ϴቊࡵ
;
2
2
2
2
2
$FFHVVRULHV
5HPRWHFRQWURO
FDEOHV
‫ࡵڼ‬IJီ३చĶ‫׌‬
჻ཐĶ৹ࢨཐij
;
2
2
2
2
2
%DWWHULHVLQ5HPRWH
;
2
2
2
2
2
&RQWURO=Q&
ီ३చ‫׌‬ԁ
¾ńњ൙‫ۂ‬Ⴙ‫؁‬Ⴙ‫ݡ‬༂ᇍᄡ‫ۂ‬ҊࡵෲႹबᇍҏਜᇓ֩‫ݧ‬਌बᄡ6-7їም݃‫֩׫‬ཏ਌ဵ౴ၟ༳‰
2,QGLFDWHVWKDWWKLVWR[LFRUKD]DUGRXVVXEVWDQFHFRQWDLQHGLQDOORIWKHKRPRJHQHRXVPDWHULDOVIRUWKLVSDUW
LVEHORZWKHOLPLWUHTXLUHPHQWLQ6-7ķ
ńњ൙‫ۂ‬Ⴙ‫؁‬Ⴙ‫ݡ‬༂ᇍᇄഖᄡ‫ۂ‬Ҋࡵ֩ଚ၆बᇍҏਜᇓ֩‫ݧ‬਌ӕԟ6-7 ķ їም݃‫֩׫‬ཏ਌ဵ
౴‰
;,QGLFDWHVWKDWWKLVWR[LFRUKD]DUGRXVVXEVWDQFHFRQWDLQHGLQDWOHDVWRQHRIWKHKRPRJHQHRXVPDWHULDOV
XVHGIRUWKLVSDUWLVDERYHWKHOLPLWUHTXLUHPHQWLQ6-7
ညΧ΁ၬణᬀ(QYLURQPHQWDO3URWHFWLRQ8VH3HULRG
7KLVORJRUHIHUVWRWKHSHULRG\HDUV
‫׌‬ሴྔ༓Ӆ௚ᇓ‫ݧ‬Ⴙ֩Ⴙ‫؁‬Ⴙ‫ݡ‬༂ᇍࠋჱෑᄡᆢӌൔႬ֩์ࡵ༳҆ߺ‫ك‬ഷທྈࠋ๰ёĶ‫׌‬ሴྔ༓Ӆ௚Ⴌ߀ൔ
Ⴌ‫׌ۂ‬ሴྔ༓Ӆ௚҆ߺ‫ࣦߐؗ‬ᄳӲ࿼ᇛ໮ಝࠋ‫ؗ‬ఇಪപˆґӅᄳӲ࿼ᇛ෩‫֩ݡ‬௽ཏ‰
7KLV ORJR UHIHUV WR WKH SHULRG \HDUV GXULQJ ZKLFK WKH WR[LF RU KD]DUGRXV VXEVWDQFHV RU HOHPHQWV
FRQWDLQHGLQHOHFWURQLFLQIRUPDWLRQSURGXFWVZLOOQRWOHDNRUPXWDWHVRWKDWWKHXVHRIWKHVH>VXEVWDQFHVRU
HOHPHQWV@ZLOOQRWUHVXOWLQDQ\VHYHUHHQYLURQPHQWDOSROOXWLRQDQ\ERGLO\LQMXU\RUGDPDJHWRDQ\DVVHWV
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
CE151_IFU_00_V2.0