Model UA844 User Guide MODEL UA844 ANTENNA

Model UA844
User Guide
MODEL UA844 ANTENNA DISTRIBUTION SYSTEM
2002, Shure Incorporated
27A8744 (BK)
Printed in U.S.A.
MODEL UA844 ANTENNA DISTRIBUTION SYSTEM
REPLACEMENT PARTS
Hardware Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90VL1371
Bulkhead Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95A8647
Power Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95A8420
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS44US
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS44E
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS44UK
The Shure Model UA844 is a UHF antenna distribution system that
allows the expansion of wireless microphone systems by splitting
one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. A single UA844 system can support
up to four wireless receivers. Multiple UA844 systems can be used
in a tiered configuration until the maximum number of compatible
frequencies is reached.
LICENSING INFORMATION
Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible
requirements.
Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of
Shure wireless microphone equipment is the user’s responsibility, and
licensability depends on the user’s classification and application, and
on the selected frequency. Shure strongly urges the user to contact
the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
IMPORTANT: THIS RADIO EQUIPMENT IS INTENDED FOR
USE IN PROFESSIONAL ENTERTAINMENT (CLASS I) AND
SIMILAR APPLICATIONS.
NOTE: THIS EQUIPMENT MAY BE CAPABLE OF OPERATING
ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO
OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES
FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION
SYSTEM COMPONENTS
•
•
•
•
•
Front-mounting antenna hardware
Rack-mounting hardware
External power supply
Antenna cables for receiver connections
DC power cables for receiver connections
SPECIFICATIONS
Carrier Frequency Range
470-900 MHz
Distributed RF Output Level (Gain)
–0.5 to 3 dB, 1 dB typical, from antenna input (unused ports terminated with 50 Ω)
Output Connector Isolation
≥25 dB
Third Order Intercept Point (3 OIP)
24 dBm, typical
DC Input Voltage
14 to 18 Vdc
DC Output Voltage
14 to 18 Vdc, 4 connectors
DC Antenna Voltage
12 Vdc
Impedance
50 Ω
RF Input/Output Antenna Connector Type
BNC
Operating Temperature Range
–7° C to 49° C (20° to 120° F)
Overall Dimensions
44.5 mm H x 482.6 mm W x 171.5 mm D (1.75 x 19 x 6.75 in.)
Net Weight
1.62 Kg (3.6 lbs)
Certification
UA844: Authorized under the Declaration of Conformity provision
of FCC Part 15A. Certified by IC in Canada under RSS-123.
Conforms to European ETSI standards EN 301 489, Parts 1
and 9. Meets the essential requirements of the European
R&TTE Directive 99/5/EC; eligible to carry the CE marking.
PS44US: Conforms to safety standard IEC 60065.
PS44E: Conforms to safety standard IEC 60065.
PS44UK: Conforms to safety standard IEC 60065.
FULL TWO YEAR WARRANTY
Shure warrants this product to be free in normal use of any defects
in workmanship and materials for two (2) years from the date of purchase. If your Shure product fails within this period, call
1–800–516–2525 in the United States for details on repair, replacement, or refund. In Europe, contact Shure Incorporated Europe
GmbH at +49 (7131) 7214–0 or +49 (7131) 7214–30 (service hotline) or contact your authorized Shure distributor. This warranty does
not cover abuse or misuse of the product, use contrary to Shure’s
instruction, ordinary wear and tear, an act of God, or unauthorized
repair.
OPTIONAL ACCESSORIES
Line Amplifier (470-900 MHz) . . . . . . . . . . . . . . . . . . . UA830WB
Powered Directional Antenna (470-900 MHz) . . . . . . . UA870WB
1/2 Wave Antenna (774–862 MHz) . . . . . . . . . . . . . . . . UA820A
1/2 Wave Antenna (690–746 MHz) . . . . . . . . . . . . . . . . UA820B
1/2 Wave Antenna (662–698 MHz) . . . . . . . . . . . . . . . . UA820C
1/2 Wave Antenna (554–590 MHz) . . . . . . . . . . . . . . . . UA820D
1/2 Wave Antenna (746–784 MHz) . . . . . . . . . . . . . . . . UA820E
2 ft. BNC–BNC Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . UA802
6 ft. BNC–BNC Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . UA806
25 ft. BNC–BNC Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . UA825
50 ft. BNC–BNC Cable . . . . . . . . . . . . . . . . . . . . . . . . . . UA850
100 ft. BNC–BNC Cable . . . . . . . . . . . . . . . . . . . . . . . . . UA8100
2
FRONT AND REAR PANELS
PANNEAUX AVANT ET ARRIÈRE
VORDERE UND RÜCKWANDBLECHE
PANELES DELANTEROS Y TRASEROS
PANNELLI ANTERIORE E POSTERIORE
PAINÉIS DIANTEIROS E TRASEIROS
1
4
1.
2.
3.
4.
5.
6.
7.
8.
9.
3
2
6
5
Antenna A Connector
Power Indicator
Antenna B Connector
RF Input, Antenna B
RF Output B Connectors
14 to 18 Vdc Power Input
14 to 18 Vdc Power Output
RF Output A Connectors
RF Input, Antenna A
1.
2.
3.
4.
5.
6.
7.
8.
9.
7
Connecteur ANTENNE A
Temoin d’alimentation
Connecteur ANTENNE B
Connecteur RF ENTREE, Antenne B
Connecteurs RF SORTIE B
Connecteurs ENTREE 14 à 18 V c.c.
Connecteurs SORTIE 14 à 18 V c.c.
Connecteurs RF SORTIE A
Connecteur RF ENTREE, Antenne A
1.
2.
3.
4.
5.
6.
7.
8.
9.
Conector de antena A
Indicador de encendido
Conector de antena B
Entrada RF, antena B
Salida RF B
Entrada de alimentación de 14 a 18 VCC
Salida de alimentación de 14 a 18 VCC
Salida RF A
Entrada RF, antena A
1.
2.
3.
4.
5.
6.
7.
8.
9.
Conector de antena A
Indicador de alimentação
Conector de antena B
Conector de entrada RF, antena B
Conectores de saída RF B
Conector de entrada de alimentação de 14 a 18 Vc.c.
Conector de saída de alimentação de 14 a 18 Vc.c
Conectores de saída RF A
Conector de entrada RF, antena A
1.
2.
3.
4.
5.
6.
7.
8.
9.
9
8
1.
2.
3.
4.
5.
6.
7.
8.
9.
9
ANTENNE–Anschlüsse A
Betriebsanzeige
ANTENNE–Anschlüsse B
HF–EINGANG–Anschlüsse, Antenne B
HF–AUSGANG–Anschlüsse B
14 – 18 Vdc EIN
14 – 18 Vdc AUS
HF–AUSGANG–Anschlüsse A
HF–EINGANG–Anschlüsse Antenne A
Connettore di antenne A
Spia di alimentazione
Connettor di antenne B
Ingresso RF, antenne B
Uscita RF B
Ingresso dell’alimentazione di 14 a 18 VCC
Uscita dell’alimentazione di 14 a 18 VCC
Uscita RF A
Ingresso RF, antenne A
INSTALLATION
INSTALACIÓN
Á
ÁÁ
ÁÁ
Á
Á
ÁÁ
Á
Á
ÁÁ
Á
Á
Á
ÁÁ
Á
ÁÁ
ÁÁ
Á
Á
Á
Á
Á
Á
Á
ÁÁ
Á
ÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁ
Á
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁ
Á
INSTALLAZIONE
INSTALAÇÃO
CABLE CONNECTIONS, ONE UA844 BRANCHMENTS DU CÂBLE, UN UA844
CONEXIONES DE CABLE, UNU844 COLLEGAMENTI DI CAVO, UN UA844
, 1 UA844
UA844
ULXP4
ULXP4
10
ULXP4
ULXP4
KABELVERBINDUNGEN, EIN UA844
CONEXÕES DE CABO, UM UA844
CABLE CONNECTIONS, MULTIPLE UA844 SYSTEMS BRANCHMENTS DU CÂBLE, SYSTÈMES MULTIPLES
KABELVERBINDUNGEN, MEHRFACHE UA844 SYSTEME CONEXIONES DE CABLE, SISTEMAS UA844 MÚLTIPLES
COLLEGAMENTI DI CAVO, SISTEMI UA844 MULTIPLI CONEXÕES DE CABO, SISTEMAS UA844 MÚLTIPLOS
UA844
UA844
ULXP4
ULXP4
UA844
ULXP4
ULXP4
ULXP4
ULXP4
UA844
ULXP4
ULXP4
ULXP4
UA844
ULXP4
ULXP4
ULXP4
UA844
ULXP4
ULXP4
ULXP4
ULXP4
UA844
ULXP4
UA844
ULXP4
ULXP4
ULXP4
ULXP4
4X
3X
3X
4X
11
ULXP4
ULXP4
ULXP4
ULXP4
DECLARATION OF CONFORMITY
We of
Shure Incorporated
222 Hartrey Ave.
Evanston IL 60202–3696 U.S.A.
847–866–2200
declare under our sole responsibility that the following products,
Model: UA844
Name: UHF Antenna Distribution Amplifier
was tested and found to comply with Part 15 of the FCC rules.
Model: UA844
UHF Antenna Distribution Amplifier
Model: PS44UK, PS44E
AC/DC Power Adapter
to which this Declaration relates
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Testing was completed by the following NVLAP or A2LA accredited
laboratory:
D.L.S. Electronic Systems, Inc.
1250 Peterson Drive
Wheeling, Illinois 60090, U.S.A.
are in conformity to European EMC Directive 89/336/EEC
are in conformity to European Low Voltge Directive 73/23/EEC
are in conformity to European R&TTE Directive 1999/5/EC
are in conformity to European CE Marking Directive 93/68/EEC
The products comply with the following product family, harmonized
or national standards:
UA844:
ETSI EN 301 489–1 V1.2.1 (2000–08)
ETSI EN 301 489–9 V1.1.1 (2000–09)
PS44E, PS44UK: EN 60065:1998
At the test location of
D.L.S. Electronic Systems, Inc.
1250 Peterson Drive
Wheeling, Illinois 60090, U.S.A.
March 6, 2002
Shure Incorporated, Manufacturer.
Signed:
Date: March 6, 2002
Name, Title: Craig Kozokar, Project Engineer, Corporate Quality,
Shure Incorporated
SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714–4608, U.S.A.
Phone: 800-257-48732200 Fax: 847-866-2279
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 852-2893-4290 Fax: 852-2893-4055
Elsewhere, Phone: 847-866–2200 Fax: 847-866-2585