Register your product and get support at
DCM7005
www.philips.com/welcome
EN User manual
3
IT
Manuale utente
93
DE Benutzerhandbuch
25
NL Gebruiksaanwijzing
117
ES Manual del usuario
47
PT Manual do utilizador
141
FR Mode d’emploi
69
SV Användarhandbok
163
(in standby mode)
(in standby mode)
1 Important
Safety
Notice
2 Your Micro Hi-Fi System
Introduction
What’s in the box
Product overview
3 Get started
Connect speakers
Connect FM antenna
Connect power
Prepare the remote control
Set clock
Turn on
Demonstrate the unit’s features
Adjust brightness of display panel
Turn on or off LED light
4 Play
Basic play operations
Play from disc
Play from USB
Adjust sound
5 Play from iPod/iPhone/iPad
Compatible iPod/iPhone/iPad
Listen to the iPod/iPhone/iPad
Charge the iPod/iPhone/iPad
Remove the iPod/iPhone/iPad
6 Listen to FM radio
Plug & Play Installation
Tune to FM radio stations
Program radio stations automatically
Program radio stations manually
Tune to a preset radio station
Show RDS information
7 Other features
4
4
5
8
8
8
9
20
20
20
20
21
Set alarm timer
Set the sleep timer
Listen to external audio device
Listen through headphone
8 Product information
22
23
23
USB playability information
Supported MP3 disc formats
9 Troubleshooting
24
12
12
12
13
13
14
14
14
14
14
15
15
15
16
16
17
17
17
17
17
18
18
18
18
18
19
19
EN
3
English
Contents
1 Important
Safety
Know these safety symbols
h Do not install near any heat sources
such as radiators, heat registers, stoves,
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation mark’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
electric shock, this apparatus should not be
!"##
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match wide
blade to wide slot.)
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
4
EN
k Use only with the cart, stand, tripod,
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
Install all batteries correctly, + and as marked on the unit.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Remove batteries when the unit is
not used for a long time.
Batteries (battery pack or batteries
installed) shall not be exposed to
<%
or the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
q Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical
equipment.
Keep this apparatus away from direct sunlight,
=
'
Never look into the laser beam inside the
apparatus.
Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect the
apparatus from the power.
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as
your hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
!
$%'*;
hazard and is illegal in many areas.
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
Notice
;$
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
EN
5
English
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
6
EN
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
The making of unauthorized copies of
copy-protected material, including computer
$%#%!
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
“Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
##;
>
%>
%
>%
<#;%!!;
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with
iPod, iPhone, or iPad may affect wireless
performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
English
This apparatus includes this label:
Class II equipment symbol:
CLASS II apparatus with double insulation,
and no protective earth provided.
Note
The type plate is located at the rear of the
apparatus.
Norge
;#?'
Observer: Nettbryteren er sekundert innkoplet.
Den innebygde netdelen er derfor ikke
#?#$##
nettkontakten.
@
?
!###
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
EN
7
2 Your Micro HiFi System
Congratulations on your purchase, and
G#
>#H
##;!
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With this unit, you can:
enjoy audio from discs, USB devices, iPod,
iPhone, iPad and other external devices
listen to radio stations
You can enrich sound output with these sound
effects:
Treble and Bass Control
Loudness Control
The unit supports these media formats:
8
EN
What’s in the box
Check and identify the contents of your
package:
Main unit
Loudspeaker boxes x 2
AC power cord
Speaker connection cables
MP3 link cable
FM antenna
Remote control with 2 AAA batteries
User manual
English
Product overview
Main unit
a Dock of iPod, iPhone and iPad.
b
i
/
Skip to the previous/next track.
Select a preset radio station.
/
Search backward or forward.
Search to a radio station.
Stop play.
Erase a program.
(In standby mode) Turn on/off Demo
mode.
Open or close the disc
compartment.
j
c SOURCE
Select a source.
d
Turn on this product
Switch to Eco Power standby or
standby mode.
Start or pause play.
J
QX=<'
e
f
g MP3 LINK
Connect to an external audio device.
h
Headphone socket.
k
l IR sensor
Detect signals from the remote
control. Always point the remote
control at the IR sensor.
m VOLUME
Adjust volume.
Adjust time.
n Display panel
o Disc compartment
EN
9
Remote control
c SHUFFLE
Play tracks randomly.
d SLEEP
Set the sleep timer.
e
Navigate through the menus.
: Skip to previous/next album;
f RDS/INFO
For selected FM radio stations:
display RDS information.
Display the current status or the disc
information.
Display the ID3 information (if
available) of MP3 tracks.
g
h
Stop play.
Erase a program.
(In standby mode) Turn on/off Demo
mode.
/
i
Skip to the previous/next track.
Select a preset radio station.
/
Search backward or forward.
Search to a radio station.
j TREBLE
Activate treble level
k BASS
Activate bass level
l Numeric keypad
Select a track directly.
a
Turn on this product.
Switch to Eco Power standby or
standby mode.
b DIM
Adjust brightness of display panel.
(Press and hold) Turn on or off the
LED light at the bottom of the unit
and at the volume knob.
10
EN
m SHIFT
Enter a two or three-digit number
(with the numeric keypad).
n PROGRAM
Program radio stations.
Program tracks.
English
o CLOCK
Set the clock.
Display the set clock.
p VOL +/ Adjust volume.
Adjust time.
q LOUDNESS
Turn on or off automatic loudness
adjustment.
r
Mute or restore volume.
Start or pause play.
s
t MENU
Access iPod/iPhone menu.
u OK
J
;
#
'
v
Open or close the disc
compartment.
w TIMER
Set alarm timer.
x REPEAT
Select a repeat play mode.
y Source buttons
Select a source.
EN
11
For the main unit side:
3 Get started
Caution
1
2
Unscrew the speaker connectors.
3
Screw the left red (+) connector to
secure the cable.
4
Insert fully the silver end of a speaker
cable into the left black (-) connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
Ensure that the colors of the speaker wires and
terminals are matched.
For optimal sound, use the supplied speakers
only.
Connect only speakers with impedance that is
the same or higher than the supplied speakers.
manual.
d
Insert fully the red end of a speaker cable
into the left red (+) connector.
For the speaker side:
1
2
Unscrew the speaker connectors.
3
Insert fully the red end of the speaker
cable into the red (+) connector.
4
Screw the red (+) connector to secure
the cable.
5
Insert fully the silver end of the speaker
cable into the black (-) connector.
6
Screw the black (-) connector to secure
the cable.
7
Repeat steps 2-6 for the right speaker.
For the left speaker, identify the speaker
cable that is connected to the left
connectors on the main unit.
Connect FM antenna
e
DEMO
COAXIAL
VIDEO
f
L
L
FM
L
R
SPEAKER OUT
R
LINE OUT
R
AUX IN
DEMO
2
FM
1
12
EN
3
ANTENNA
English
Prepare the remote control
Tip
For optimal reception, fully extend and adjust
the position of the antenna.
Caution
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
socket.
The unit does not support MW radio
reception.
1
Risk of explosion! Keep batteries away from
%
'<!
'
Connect the supplied FM antenna to the
FM ANTENNA socket on the main unit.
Connect power
To insert the remote control battery:
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
a
Caution
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before you connect the AC power cord,
ensure that you have completed all other
connections.
b
c
COAXIAL
VIDEO
L
L
R
R
FM
L
R
AC MAIN
~
SPEAKER OUT
LINE OUT
AUX IN
DEMO
ANTENNA
Note
1
Connect the power cable to:
the AC~ jack on the main unit.
the wall socket.
If you are not going to use the remote control
for a long time, remove the batteries.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed of properly.
EN
13
Set clock
1
In standby mode, press CLOCK for 3
seconds to activate clock setting mode.
» [CLOCK SET] scrolls on the display,
then the time format [24H] or [12H]
appears.
2
Press VOL +/- to select 24H or 12H, then
press CLOCK
'
» The hour digits begin to blink.
3
Press VOL +/- to set hour, then press
CLOCK again.
» The minute digits begin to blink.
4
5
Press VOL +/- to set minute.
Press CLOCK
#
setting.
Note
If no button is pressed in 90 seconds, the
system exits clock setting mode automatically.
Turn on
1
Press .
» The unit switches to the last selected
source.
Switch to standby mode
Press to switch the Hi-Fi system to standby
mode.
» The clock (if set) appears on the display
panel.
To switch the system to Eco Power Standby
mode:
In standby mode, press and hold for 2
seconds.
» [ECO POWER] (Eco power) scrolls on the
display, then the backlight turns off.
14
EN
Demonstrate the unit’s
features
In the standby mode, press until “DEMO
ON” is displayed.
» Available features are displayed one by one.
To turn off the demonstration, press
again.
Adjust brightness of display
panel
Press DIM repeatedly to select different
brightness levels.
Turn on or off LED light
In power-on mode, press and hold DIM to
turn on or off the LED light at the bottom of
the unit and at the volume knob.
Play from USB
English
4 Play
Basic play operations
You can control play through following
operations.
Key
/
Function
Press and hold to fast-forward/
fast-reverse the track during
playback, then release to resume
play.
To pause/resume play during
playback.
INFO
select different play information.
REPEAT To select a repeat play mode:
[REP] (repeat): play current track
repeatedly.
[REP ALL] (repeat all): play all
tracks repeatedly.
Press again to return to normal
play.
SHUFFLE To play tracks randomly.
Press again to return to normal
play.
Play from disc
1
2
Press DISC to select the CD source.
Warning
Ensure that the USB device contains playable
audio contents for supported formats.
1
Flip open the cover marked
front panel.
2
Insert the USB device into the USB
socket.
3
Press USB to select the USB source.
» Play starts automatically. If not, press
ALBUM/
to select a folder and
/ ##'OK to
start play.
on the
Press .
» The disc compartment opens.
3
Place a disc with the printed side facing
up, then press .
Adjust sound
4
Play starts automatically.
If play does not start, press /
select a track, then press
.
During play, you can adjust volume through
following operations.
to
EN
15
Key
VOL +/-
Function
To increase/decrease the
volume.
To mute/restore sound.
LOUDNESS To turn on/off automatic
loudness control.
BASS
Press BASS to activate bass
level, and then adjust with
VOL +/-.
TREBLE
Press TREBLE to activate
treble level, and then adjust
with VOL +/-.
16
EN
English
5 Play from iPod/
iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The unit supports the following iPod, iPhone,
and iPad models:
Made for.
iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
iPod touch (1st, 2nd, 3rd and 4th
generation)
iPod Mini
iPhone
iPhone 3G
iPhone 3GS
iPhone 4
iPad
Listen to the iPod/iPhone/
iPad
1
Press DOCK to select the iPhone/iPod/
iPad source.
2
Open the iPhone/iPod/iPad dock on the
top panel and place the iPhone/iPod/iPad
in the dock.
To pause/resume play, press
.
To skip to a track, press / .
To search during play: press and hold
/ , then release to resume
normal play.
To navigate the menu: press MENU
and / to select items, then press
OK
'
Note
When iPod/iPhone/iPad source is selected, you
cannot enjoy audio through the headphone
socket.
Charge the iPod/iPhone/iPad
The docked iPod/iPhone/iPad begins to charge
as soon as the unit is connected to AC power.
Note
iPod with color display, iPod classic, and iPod
with video are not compatible with dock
charging.
Remove the iPod/iPhone/iPad
1
2
Pull the iPhone/iPod/iPad off the dock.
Flip down the lid to hide the dock.
EN
17
6 Listen to FM
radio
To tune to a weak station:
Press
/
#;#;
#
reception.
Tip
Plug & Play Installation
[STEREO] is default setting for tuner mode.
Under tuner mode, you can press OK
repeatedly to toggle between [STEREO] and
[MONO], and the unit memorizes your setting
even if you turn off the unit or turn to other
sources.
when the unit turn to Radio mode, and No
radio stations are stored, [AUTO INSTALL PRESS PLAY, STOP CANCEL] (to auto install,
press
; to cancel, press ) displays.
1
Press
on the main unit to start
installation.
» The unit automatically stores radio
G$#$'
» When all the available radio stations
%
is broadcast automatically.
Program radio stations
automatically
Note
You can program a maximum of 20 preset
radio stations.
Toexit Plug and Play installation mode
2
press source keys or on the remote
control.
» The system switches to the designated
source mode or standby mode.
1
» $
broadcast automatically.
Tune to FM radio stations
Warning
Ensure that you have connected and fully
extended the supplied FM antenna.
1
2
3
Program radio stations
manually
Press RADIO.
Press and hold
radio station.
In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
» [AUTO] (auto) is displayed and begins
to blink.
Note
/
to search to a
When the frequency starts to change,
release the button.
» The FM tuner tunes to a station with
strong reception automatically.
4
Repeat steps 2-3 to tune to more
stations.
18
EN
You can program a maximum of 20 preset
radio stations.
1
2
Tune to a radio station.
Press PROGRAM to activate
programming.
4
Press / to allocate a number from
1 to 20 to this radio station, then press
PROGRAM
'
» The preset number and the frequency
of the preset station are displayed.
Synchronize clock with RDS
1
Tune to a RDS radio station that
transmits time signals.
Repeat the above steps to program other
stations.
2
Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
Note
To overwrite a programmed station, store
another station in its place.
You can synchronize time shown on the unit
with that on the RDS station.
English
3
» If no time signal is received, [NO CT]
is displayed.
Note
The accuracy of the transmitted time depends
Tune to a preset radio station
1
on the RDS station that transmits the time
signal.
Press / to select a preset number
that you want.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
1
2
Tune to a RDS station.
Press RDS repeatedly to scroll through
the following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» RDS clock
» Frequency
EN
19
7 Other features
Activate/deactivate alarm timer
1
Set alarm timer
This unit can be used as an alarm clock. You
can select CD, Dock, iPod/iPhone playlist, FM or
USB as alarm source.
In standby mode, press TIMER repeatedly
to activate or deactivate timer.
» If timer is activated, is displayed.
Tip
Alarm timer is not available in MP3 LINK
mode.
If CD/USB/iPod/iPhone source is selected,
yet no disc is placed or no USB/iPod/iPhone
connected, the system switches to the tuner
source automatically.
Note
Make sure that you have set the clock
correctly.
1
In standby mode, press and hold TIMER
until [TIMER SET] scrolls on the display.
2
Press source buttons on the remote
control to select a source: CD, FM, USB,
Dock or iPod/iPhone playlist.
If iPod/iPhone playlist is selected
as alarm source, you need create a
playlist called “PHILIPS” in your iPod/
iPhone.
If no playlist called “PHILIPS” is
created in the iPod/iPhone or no
track is stored in the playlist, the
unit switches to iPod/iPhone alarm
source.
3
Press TIMER
'
» The hour digits are displayed and begin
to blink.
4
Press VOL +/- repeatedly to set hour,
then press TIMER$
'
» The minute digits are displayed and
begin to blink.
5
Press VOL +/- to set minute, then press
TIMER
'
» VOL (volume) is displayed and begins
to blink.
6
Press VOL +/- to adjust volume, then
press TIMER
'
20
EN
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
» When sleep timer is activated, the
display shows .
To deactivate sleep timer
1
Press SLEEP repeatedly until “SLEEP
OFF” is displayed.
» When sleep timer is deactivated,
disappears.
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the audio device.
For audio device with red/white
audio output sockets:
Connect a red/white audio cable
(not supplied) to the AUX IN
sockets and to the audio output
sockets on the audio device.
2
3
For audio device with headphone
sockets:
Connect the supplied MP3 Link cable
to the MP3 LINK socket and to the
headphone socket on the audio
device.
English
Select MP3 LINK/AUX source.
Play the device.
Listen through headphone
1
Plug a headphone into the
the unit.
socket on
EN
21
8 Product
information
Note
Product information is subject to change
without prior notice.
!
2 X 50W RMS
20 - 20000 Hz, ±3dB
1000 mV RMS 22kohm
Semiconductor
12cm/8cm
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
24Bits / 44.1kHz
<0.8% (1kHz)
Audio DAC
Total Harmonic
Distortion
Frequency Response 4Hz -20kHz (44.1kHz)
S/N Ratio
>82dBA
22
EN
FM: 87.5 108MHz
Tuning grid
50KHz
- Mono, 26dB S/N Ratio <22 dBf
- Stereo, 46dB S/N Ratio <43 dBf
Search Sensitivity
<28dBf
Total Harmonic
<2%
Distortion
Signal to Noise Ratio
>55dB
Speaker
6ohm
Impedance
Speaker Driver 13 cm woofer + 2.5 cm
Dome tweeter
Sensitivity
>86dB/m/W ± 4dB/m/W
>82dBA
Disc
Laser Type
Disc Diameter
Support Disc
Tuning Range
Speakers
"
Rated Output
Power
Frequency
Response
Signal to Noise
Ratio
Aux Input
Tuner-Specs
General information
AC power
Operation Power
Consumption
Headphone output
USB Direct
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
Weight
- With Packing
- Main Unit
- Speaker Box
230V, 50Hz
38W
2X15mW 32ohm
version 2.0FS
250 x 92 x 285mm
174 x 260 x 240mm
10 kg
2.5 kg
6.1 kg
Supported MP3 disc formats
Compatible USB devices:
QX=
;‚QX'ƒ
QX„'„€
QX=#;‚QX'ƒ
QX„'„€
memory cards (requires an additional
card reader to work with this unit)
Supported formats:
QX
;#
@„%
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 64 bytes)
ISO9660, Joliet
Maximum title number: 512 (depending
##$€
Maximum album number: 255
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32~320 (kbps),
variable bit rates
Unsupported formats:
Empty albums: an empty album is an
album that does not contain MP3/WMA
#%
!
G#;'
Q
#
'@
example, Word documents (.doc) or MP3
#G
'#$
not played.
J%…%>J†
#
‡†
†#‚'G<%'ˆ%
.m4p, .mp4, .aac)
†#‰
#
EN
23
English
USB playability information
9 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
#
Ensure that the AC power cord of the
unit is connected properly.
#
Ensure that there is power at the AC
outlet.
#
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No sound or poor sound
#
Adjust the volume.
#
Disconnect the headphones.
#
Check that the speakers are connected
correctly.
#
Check if the stripped speaker wires are
clamped.
No response from the unit
#
Disconnect and reconnect the AC power
plug, then turn on the unit again.
#
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
24
EN
Remote control does not work
#
Before you press any function button,
#
G
remote control instead of the main unit.
#
Reduce the distance between the remote
control and the unit.
#
Insert the battery with its polarities (+/–
signs) aligned as indicated.
#
Replace the battery.
#
Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
#
Insert a disc.
#
Check if the disc is inserted upside down.
#
Wait until the moisture condensation at
the lens has cleared.
#
Replace or clean the disc.
#
Q#‹J‡
'
$%!'
#
!
#
#QX
device has exceeded a certain limit. This
phenomenon is not a malfunction.
#
#
supported.
USB device not supported
#
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
#
Increase the distance between the unit
and your TV or VCR.
#
Fully extend the FM antenna.
#
Connect an outdoor FM antenna instead.
Timer does not work
#
Set the clock correctly.
#
Switch on the timer.
Clock/timer setting erased
#
Power has been interrupted or the power
cord has been disconnected.
#
Reset the clock/timer.
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
DCM7005_12_UM_V3.1