User’s Guide for Nokia 7610
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product
RH-51 is in conformity with the provisions of the following Council Directive:
1999/5/EC. A copy of the Declaration of Conformity can be found at
http://www.nokia.com/phones/declaration_of_conformity/
Copyright © 2004 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People and Xpress-on are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks
or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd © 1998-2004. Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other
patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2004. Tegic Communications, Inc. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document
without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.
Issue 1
Copyright © 2004 Nokia. All rights reserved.
Contents
For your safety ......................................... 8
1. General information ..........................11
Putting on the wrist strap .............................................. 11
Essential indicators in standby mode.......................... 12
Menu..................................................................................... 13
Switching between applications........................... 13
Actions common to all applications ............................ 14
Volume control................................................................... 15
Shared memory.................................................................. 16
2. Your phone .........................................17
Making a call...................................................................... 17
Making a call using the Contacts directory....... 17
Calling your voice mailbox (Network Service) .. 18
Speed dialling a phone number............................. 18
Making a conference call (Network Service)..... 19
Answering a call ................................................................ 20
Options during a call ................................................ 20
Call waiting (Network Service).............................. 21
Diverting calls (Network Service).......................... 21
Log - Call register and general log............................... 22
GPRS data counter .................................................... 22
Recent calls register ................................................. 22
Call duration ............................................................... 23
Viewing the general log........................................... 24
3. Personal information .........................25
Contacts ............................................................................... 25
Creating and editing contact cards...................... 25
Copying contacts between the SIM card
and phone memory ................................................... 26
Adding a ringing tone for a contact card
or group ........................................................................ 26
Voice dialling .............................................................. 27
Assigning speed dialling keys................................. 28
Viewing subscribed contacts.................................. 29
Managing contact groups ....................................... 29
Presence (Network Service) ............................................ 29
Changing your availability information .............. 30
Changing who can view your Presence
information.................................................................. 30
Updating your Presence information ................... 33
Presence settings ....................................................... 33
Positioning (Network Service)........................................ 34
Calendar ............................................................................... 34
Creating calendar entries ........................................ 34
To-do..................................................................................... 36
Importing data from compatible Nokia phones ....... 36
Copyright © 2004 Nokia. All rights reserved.
4. Multimedia......................................... 37
Camera.................................................................................. 37
Taking pictures ........................................................... 37
Recording videos........................................................ 39
Viewing images .................................................................. 40
Zooming on a saved image ..................................... 40
Keyboard shortcuts.................................................... 41
RealPlayer™ ......................................................................... 41
Playing media files .................................................... 42
Changing the settings .............................................. 43
Movie director .................................................................... 43
Gallery................................................................................... 44
Opening files ............................................................... 45
Other default folders ................................................ 45
Downloading files ...................................................... 46
Uploading images to an image server
(Network Service) ...................................................... 47
5. Messaging........................................... 48
Writing text......................................................................... 50
Using traditional text input .................................... 50
Using predictive text input ..................................... 51
Copying text to the clipboard ................................ 53
Writing and sending messages...................................... 53
Settings needed for multimedia messaging....... 54
Settings needed for e-mail ..................................... 55
Inbox - receiving messages ............................................ 55
Viewing multimedia objects ................................... 55
Receiving smart messages ...................................... 56
Receiving service messages (Network
Service)..........................................................................57
My folders ...........................................................................57
Remote mailbox (Network Service) ..............................57
Opening the mailbox.................................................58
Retrieving e-mail messages from the
mailbox .........................................................................58
Deleting e-mail messages........................................59
Disconnecting from mailbox...................................60
Outbox ..................................................................................60
Viewing messages on a SIM card..................................60
Cell broadcast (Network Service) ..................................61
Service command editor ..................................................61
Messaging settings............................................................61
Settings for text messages......................................61
Settings for multimedia messages........................62
Settings for e-mail.....................................................64
Settings for service messages.................................65
Settings for Cell broadcast (Network Service)...66
Settings for the Other folder ..................................66
6. Tools.................................................... 67
Settings.................................................................................67
Changing general settings.......................................67
Phone settings ............................................................67
Call settings.................................................................69
Connection settings ..................................................70
Date and time .............................................................74
Call barring (Network Service) ...............................74
Copyright © 2004 Nokia. All rights reserved.
Network........................................................................ 75
Enhancement settings.............................................. 75
Security ................................................................................ 76
Phone and SIM ........................................................... 76
Certif. management.................................................. 78
Device manager ................................................................. 79
File manager ....................................................................... 80
Viewing memory consumption .............................. 80
Voice commands................................................................ 81
Adding a voice command to an application...... 82
Starting an application using a voice
command ..................................................................... 83
Replaying, erasing, or changing a voice
command ..................................................................... 83
7. Personalising your phone ..................84
Profiles.................................................................................. 84
Changing the profile................................................. 84
Customising profiles ................................................. 84
Themes.................................................................................. 86
Editing themes ........................................................... 86
Go to ..................................................................................... 87
Adding shortcuts........................................................ 88
8. Extras ..................................................89
Wallet .................................................................................. 89
Entering the wallet code ......................................... 89
Storing personal card details ................................. 90
Creating personal notes........................................... 91
Creating a wallet profile.......................................... 91
Retrieving information from the wallet to
your browser ............................................................... 92
Viewing ticket details ............................................... 92
Wallet settings ........................................................... 92
Resetting the wallet and wallet code.................. 93
Calculator ............................................................................ 93
Converter ............................................................................. 94
Converting units......................................................... 94
Setting a base currency and exchange rates..... 95
Notes..................................................................................... 95
Clock...................................................................................... 96
Changing clock settings........................................... 96
Setting an alarm ........................................................ 96
Recorder ............................................................................... 97
Chat (Network Service).................................................... 98
Before using Chat ...................................................... 98
Connecting to a chat server ................................... 99
Modifying your chat settings ................................. 99
Joining and leaving a chat group........................100
Searching for chat groups and users .................101
Chatting in a chat group .......................................101
Starting and viewing individual
conversations ............................................................102
Chat contacts............................................................103
Editing chat group settings ..................................103
Chat and Presence servers ....................................104
Copyright © 2004 Nokia. All rights reserved.
Memory card.....................................................................105
Format memory card...............................................105
Backing up and restoring information...............106
Locking the memory card ......................................106
Checking memory consumption ..........................107
9. Services and Applications ...............108
Web (Mobile browser)....................................................108
Basic steps for accessing .......................................109
Setting up the phone for the browser
service .........................................................................109
Making a connection ..............................................110
Viewing bookmarks .................................................110
Browsing.....................................................................111
Downloading .............................................................113
Ending a connection ...............................................114
Browser settings.......................................................115
Application manager ......................................................116
Installing applications - general information..116
Removing an application.......................................118
10. Connectivity...................................119
Bluetooth connection.....................................................119
Bluetooth settings ...................................................120
Sending data via Bluetooth ..................................120
Paired devices view .................................................122
Receiving data via Bluetooth ...............................123
Disconnecting Bluetooth .......................................123
Connection manager...................................................... 123
Viewing connection details.................................. 124
Ending connections ................................................ 125
Connecting your phone to a compatible
computer ........................................................................... 125
Sync - remote synchronisation................................... 125
Creating a new synchronisation profile ........... 126
Synchronising data................................................. 127
11. Troubleshooting.............................128
Q&A .................................................................................... 129
12. Battery information ......................131
13. Enhancement .................................132
Battery ............................................................................... 133
Wireless Headset HDW-2 ............................................. 133
Wireless Clip-on Headset HS-3W .............................. 133
Boom Headset HDB-4 ................................................... 134
Wireless Car Kit CK-1W................................................ 134
Nokia Image Viewer SU-2 ............................................ 134
Nokia Digital Pen SU-1B............................................... 135
14. Care and Maintenance..................136
15. Additional safety information .....137
Index......................................................141
Copyright © 2004 Nokia. All rights reserved.
For your safety
Read these simple guidelines. Breaking the rules may be
dangerous or illegal. Further detailed information is given
in this manual.
SWITCH ON SAFELY Do not switch the
phone on when wireless phone use is
prohibited or when it may cause interference
or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless phones may be
subject to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the phone off near
medical equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Don't use the phone where
blasting is in progress.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Don’t touch the antenna
unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your phone is not
water-resistant. Keep it dry.
BACKUP COPIES Remember to make backup
copies or keep a written record of all
important information stored in your phone.
SWITCH OFF WHEN REFUELLING Don’t use
the phone at a refuelling point. Don’t use near
fuel or chemicals.
8
Copyright © 2004 Nokia. All rights reserved.
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
Network Services
About your device
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These Network Services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize Network
Services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use Network Services. For
instance, some networks may not support all languagedependent characters and services.
The wireless device described in this guide is approved for
use on the EGSM 900 and GSM1800 and 1900 networks.
Contact your service provider for more information about
networks.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Contact your
service provider for more information.
EMERGENCY CALLS Ensure the phone is
switched on and in service. Press
as many
times as needed to clear the display and
return to the start screen. Key in the
emergency number, then press . Give your
location. Do not end the call until given
premission to do so.
When using the features in this device, obey all laws and
respect privacy and legitimate rights of others.
Warning: To use any features in this device,
other than the alarm clock, the device must be
switched on. Do not switch the device on when
wireless device use may cause interference or
danger.
Copyright © 2004 Nokia. All rights reserved.
9
Chargers and enhancements
Note: Check the model number of any charger
before use with this device. This device is
intended for use when supplied with power from
ACP-8, ACP-12, LCH-9 and LCH-12.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with
this particular model. The use of any other types
may invalidate any approval or warranty, and
may be dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Your device and its enhancements may contain small
parts. Keep them out of reach of small children.
10
Copyright © 2004 Nokia. All rights reserved.
General information
1. General information
Warning: To use any features in this device, other than the alarm clock, the
device must be switched on. Do not switch the device on when wireless device
use may cause interference or danger.
Your Nokia 7610 provides various functions that are ideal for daily use, such as Camera,
Video recorder, Messaging, E-mail, Wallet, Clock, Calculator, and Calendar.
Stickers in the sales package
• The stickers included on the warranty card, in the sales package, contain important
information for service and customer support purposes. The sales package also
includes instructions on how you should use these stickers.
Putting on the wrist strap
Thread the strap and then tighten it. See Fig. 1‚ on page 11.
Note: Only connect the strap to one fixture at a time. Use only Nokia approved
enhancements.
Fig. 1 Putting on the wrist
strap.
Copyright © 2004 Nokia. All rights reserved.
11
General information
Essential indicators in standby mode
- You have received one or several messages to the Inbox in Messaging.
- You have received one or several voice messages. See “Calling your voice mailbox
(Network Service)” on page 18.
- There are messages waiting to be sent in Outbox.
- Ringing type has been set to Silent, Message alert tone to Off, and Chat alert tone to On
in the currently active profile.
- The phone’s keypad is locked. See the Getting Started guide.
- You have an active alarm.
- You can make calls using phone line 2 only (Network Service). See “Line in use
(Network Service)” on page 70.
- All calls to the phone are diverted.
- Indicates that all calls to the phone
are diverted to a voice mailbox. See “Diverting calls (Network Service)” on page 21. If you
have two phone lines, the divert indicator for the first line is
and for the second
line
.
- A data call is active.
- Shown instead of the antenna symbol
(shown in the top left corner in standby
mode) when there is an active GPRS connection. - Shown when the GPRS connection
is put on hold during voice calls.
- Bluetooth is active. When data is transmitted via Bluetooth,
12
Copyright © 2004 Nokia. All rights reserved.
is shown.
Press
(Menu key) to display the main Menu. In the Menu, you can access all the
applications in your phone.
Moving in the Menu
• Press the scroll key on the top
, bottom
blue arrows 1 to 4) to navigate the Menu.
, left
and right
(shown with
Options in the
Menu: Open, List view /
Grid view, Move, Move to
folder, New folder, App.
downloads, Memory
details, Help and Exit.
Opening applications or folders
• Scroll to an application or a folder and press the centre of the scroll key
(shown
with blue arrow 5) to open it.
Closing applications
• Backstep by pressing Back or Exit as many times as needed to return to standby mode
or select Options → Exit.
Switching between applications
If you have several applications open and want to switch from one application to another,
press and hold
(Menu key). The application switching window opens showing a list of
applications that are currently open. Scroll to an application and press
to go to it.
General information
Menu
5
3
1
2
4
Fig. 2 Using the scroll key.
Copyright © 2004 Nokia. All rights reserved.
13
General information
Actions common to all applications
Fig. 3 Switching between
applications.
14
• Opening items for viewing - When you are viewing a list of files or folders, to open
an item, scroll to an item and press
, or select Options → Open.
• Editing items - To open an item for editing, you sometimes need to first open it for
viewing and then select Options → Edit, if you want to change its contents. Use the
scroll key to scroll through all fields of the item.
• Renaming items - To give a new name to a file or folder, scroll to it and select
Options → Rename.
• Removing, deleting items - Scroll to the item and select Options → Delete or press
. To delete many items at a time, you first need to mark them. See the next
paragraph: ‘Marking an item’.
• Marking an item - There are several ways to select items when you are in a list.
• To select one item at a time, scroll to it and select Options → Mark/Unmark → Mark
or press
and
at the same time. A check mark is placed next to the item.
• To select all items in the list, select Options → Mark/Unmark → Mark all.
• Marking multiple items - Press and hold , then move the scroll key down or up.
As the selection moves, a check mark is placed next to the items. To end the
selection, stop the scrolling with the scroll key and then release .
After you have selected all the items you want, you can move or delete them by
selecting Options → Move to folder or Delete.
• To unmark an item, scroll to it and select Options → Mark/Unmark → Unmark or press
and
at the same time.
• Creating folders - To create a new folder, select Options → New folder. You are asked
to give a name to the folder (max. 35 letters).
• Moving items to a folder - To move items to a folder or between folders, select
Options → Move to folder (not shown if there are no folders available). When you
select Move to folder, a list of available folders opens and you can also see the root
level of the application (for moving an item out of a folder). Select the location you
want the item to be moved to and press OK.
Copyright © 2004 Nokia. All rights reserved.
General information
• Sending items - To send items, to compatible devices, scroll to the item that you want
to send, select Options → Send. Select the method, the choices are Via multimedia, Via
Bluetooth, and Via e-mail.
• If you choose to send the item in an e-mail or a multimedia message, an editor
opens. Press
to select the recipient(s) from the Contacts directory or write the
phone number or e-mail address of the recipient in the To: field. Add text or sound
and select Options → Send. See “Writing and sending messages” on page 53.
• Via Bluetooth. See “Sending data via Bluetooth” on page 120.
Copyright protections may prevent some images, ringing tones, and other content from
being copied, modified, transferred or forwarded.
Volume control
When you have an active call or are listening to a sound, press
decrease the volume level, respectively.
or
to increase or
The loudspeaker allows you to speak and listen to the phone from a short distance
without having to hold the phone to your ear, for example, having it on a table nearby.
The loudspeaker can be used during a call, with sound and video applications, and when
viewing multimedia messages. Sound and video applications use the loudspeaker by
default. Using the loudspeaker makes it easier to use other applications while in a call.
Voice volume icons:
- for earpiece mode,
- for loudspeaker
mode.
To start using the loudspeaker during an already active call, select Options → Activate
loudsp.. A tone is played,
is shown in the navigation bar, and the volume indicator
changes.
The loudspeaker cannot be activated when you have connected a headset to the phone.
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
To turn off the loudspeaker when you have an active call, select Options → Activate
handset.
Copyright © 2004 Nokia. All rights reserved.
Fig. 4 Volume indicators
for earpiece and
loudspeaker modes are
shown in the navigation
bar.
15
General information
16
Shared memory
The following features in this device may share memory: contacts, text messages, and
multimedia messages, images and ringing tones, Video recorder, RealPlayerTM, calendar
and to-do notes, and downloaded applications. Use of one or more of these features may
reduce the memory available for the remaining features sharing memory. For example,
saving many multimedia messages may use all of the available memory. Your device may
display a message that the memory is full when you try to use a shared memory feature.
In this case, delete some of the information or entries stored in the shared memory
features before continuing. Some of the features , such as calendar and to-do notes may
have a certain amount of memory specially allotted to them in addition to the memory
shared with other features.
Copyright © 2004 Nokia. All rights reserved.
Your phone
2. Your phone
Making a call
1 In standby mode, key in the phone number, including the area code. Press
to move the cursor. Press
to remove a number.
or
• For international calls, press
twice for the international prefix (the +
character replaces the international access code) and then key in the country code,
the area code without 0, and the phone number.
2 Press
to call the number.
3 Press
to end the call (or to cancel the call attempt).
Pressing
will always end a call, even if another application is active and displayed.
When the keypad lock is on, calls still may be possible to the official emergency number
programmed into your device. Key in the emergency number and press
.
You can make a call using your voice so that you do not need to look at the display to
key in the number. See “Voice dialling” on page 27.
Making a call using the Contacts directory
Fig. 5 Making a call.
1 To open the Contacts directory, go to Menu → Contacts.
2 To find a contact, scroll to the desired name, or key in the first letters of the name.
The Search field opens automatically and matching contacts are listed.
3 Press
to start the call.
If the contact has more than one phone number, scroll to the number and press
to start the call.
Copyright © 2004 Nokia. All rights reserved.
17
Your phone
Calling your voice mailbox (Network Service)
The voice mailbox is an answering service where callers who are unable to reach you can
leave you voice messages.
• To call your voice mailbox, press
and
in standby mode.
• If the phone asks for the voice mailbox number, key it in and press OK. You can obtain
this number from your service provider.
See “Diverting calls (Network Service)” on page 21.
Each phone line may have its own voice mailbox number. See “Line in use (Network
Service)” on page 70.
Changing the voice mailbox number
To change the phone number of your voice mailbox, go to Menu → Tools → Voice
mailbox and select Options → Change number. Key in the number (obtained from your
service provider) and press OK.
Speed dialling a phone number
To view the speed
dialling grid, go to Menu
→ Tools → Speed dial.
18
1 Assign a phone number to one of the speed dialling keys (
). See “Assigning
speed dialling keys” on page 28.
2 To call the number: In standby mode, press the corresponding speed dialling key and
. If the Speed dialling function is set to On: Press and hold the corresponding speed
dialling key until the call is started.
Copyright © 2004 Nokia. All rights reserved.
Your phone
Making a conference call (Network Service)
Your Nokia 7610 supports conference calling with up to six participants. See Fig. 6‚ on
page 19.
1 Make a call to the first participant.
2 To make a call to a new participant, select Options → New call. Key in or search the
memory for the phone number of the participant and press Call. The first call is
automatically put on hold.
3 When the new call has been answered, join the first participant in the conference call.
Select Options → Conference.
4 To add a new person to the call, repeat step 2 and then select Options → Conference
→ Add to conference.
• To have a private conversation with one of the participants: Select Options →
Conference → Private. Scroll to the desired participant and press Private. The
conference call is put on hold in your phone, and the other participants can still
continue talking with each other while you have a private discussion with one
participant only. Once you have finished the private conversation, press Cancel to
return to the conference call.
• To drop one participant from the conference call, select Options → Conference →
Drop participant, then scroll to the participant and press Drop.
5 To end the active conference call, press
.
Copyright © 2004 Nokia. All rights reserved.
Fig. 6 Conference call
with two participants.
19
Your phone
Answering a call
• To answer an incoming call, press
• To end the call, press
.
.
If you do not want to answer a call, press
. The caller will hear a ’line busy’ tone.
When a call comes in, press Silence to quickly mute the ringing tone.
Options during a call
Press Options during a call for some of the following options:
Mute or Unmute, End active call, End all calls, Hold or Unhold, New call, Conference,
Private, Drop participant, Answer, and Reject.
Swap is used to switch between the active call and the call on hold.
Transfer is used to connect an incoming call or a call on hold with an active call and to
disconnect yourself from both calls.
Send DTMF is used to send DTMF tone sequences, for example, passwords or bank account
numbers.
Fig. 7 Options during a
call.
20
You may not have all of these options. Contact your service provider for more details.
1 Key in the digits with
. Each keystroke generates a DTMF tone, which
is transmitted while the call is active. Press
repeatedly to produce: *, p (inserts
a pause of approximately two seconds before, or between DTMF characters.), and w
(if you use this character, the remaining sequence is not sent until you press Send
again during the call). Press
to produce #.
2 To send the tone, press OK.
Copyright © 2004 Nokia. All rights reserved.
Your phone
Call waiting (Network Service)
If you have activated the Call waiting service, the network will notify you of a new
incoming call while you have a call in progress.
1 During a call, press
to answer the waiting call. The first call is put on hold.
To switch between the two calls, press Swap.
2 To end the active call, press
.
Diverting calls (Network Service)
When this network service is activated, you can direct your incoming calls to another
number, for example, to your voice mailbox number. For details, contact your service
provider.
• Select one of the divert options, for example, select If busy to divert voice calls when
your number is busy or when you reject incoming calls.
• Select Options → Activate to set the divert setting on, Cancel to set the divert setting
off, or Check status to check whether the divert is activated or not.
• To cancel all active diverts, select Options → Cancel all diverts.
Go to Menu →
Settings → Call divert.
See “Essential indicators in standby mode” on page 12.
You cannot have barring of incoming calls and call diverting active at the same time. See
“Call barring (Network Service)” on page 74.
Copyright © 2004 Nokia. All rights reserved.
21
Your phone
Log - Call register and general log
Go to Menu → Log.
In the log you can monitor phone calls, text messages, packet data connections, and data
calls registered by the phone. You can filter the log to view just one type of event and
create new contact cards based on the log information.
Connections to your remote mailbox, multimedia messaging centre, or browser pages are
shown as data calls or packet data connections in the general communications log.
GPRS data counter
Go to Menu → Log →
GPRS counter.
The GPRS data counter allows you to check the amount of data sent and received during
packet data (GPRS) connections. This can be beneficial as you may be charged for your
GPRS connections by the amount of data sent and received.
Recent calls register
22
Go to Menu → Log
→ Recent calls.
The phone registers the phone numbers of missed, received, and dialled calls, and the
approximate duration of your calls. The phone registers missed and received calls only if
the network supports these functions, and the phone is switched on and is within the
network’s service area.
Options in the
Missed, Received, Dialled
views: Call, Create
message, Use number,
Request presence, Delete,
Clear list, Add to Contacts,
Help, and Exit.
Missed calls and received calls
To view a list of the last 20 phone numbers from which somebody has tried to call you
without success (Network Service), go to Log → Recent calls → Missed calls.
Tip! When you see a note in standby mode about missed calls, press Show to
access the list of missed calls. To call back, scroll to the number or name you want
and press
.
Copyright © 2004 Nokia. All rights reserved.
Your phone
To view a list of the 20 numbers or names from which you have most recently accepted
calls (Network Service), go to Log → Recent calls → Received calls.
Dialled numbers
To view the 20 phone numbers that you have most recently called or attempted to call,
go to Log → Recent calls → Dialled nos..
Erasing recent call lists
• To clear all recent call lists, select Options → Clear recent calls in the Recent calls
main view.
• To clear one of the call registers, open the register you want to erase and select
Options → Clear list.
• To clear an individual event, open a register, scroll to the event, and press
.
Call duration
Allows you to view the duration of your incoming and outgoing calls.
Note: The actual time invoiced for calls by your service provider may vary,
depending on network features, rounding off for billing, and so forth.
Fig. 8 The Dialled
numbers view.
Go to Menu → Log →
Call duration.
Erasing call duration timers - Select Options → Clear timers. For this you need the lock
code. See “Security” on page 76.
Copyright © 2004 Nokia. All rights reserved.
23
Your phone
Viewing the general log
Go to Menu → Log
and press
.
In the general log, for each communication event, you can see the sender or recipient
name, phone number, name of the service provider, or access point. See Fig. 9‚ on
page 24.
Sub-events, such as a text message sent in more than one part and packet data
connections, are logged as one communication event.
Filtering the log
1 Select Options → Filter. A list of filters opens.
2 Scroll to a filter and press Select.
Erasing the contents of the log
• To erase all the log contents, Recent calls register, and Messaging delivery reports
permanently, select Options → Clear log. Confirm by pressing Yes.
Fig. 9 General log of
communication events.
Packet data counter and connection timer
• To view how much data, measured in kilobytes, has been transferred and how long a
certain GPRS connection has lasted, scroll to an Incoming or Outgoing event with the
access point icon
and select Options → View details.
Log settings
• Select Options → Settings. The list of settings opens.
• Log duration - The log events remain in the phone memory for a set number of days
after which they are automatically erased to free memory.
If you select No log, all the log contents, Recent calls register, and Messaging
delivery reports are permanently deleted.
• Show call duration. See “Call duration” on page 23.
24
Copyright © 2004 Nokia. All rights reserved.
Contacts
In Contacts, you can store and manage contact information, such as names, phone
numbers, and addresses.
You can also add a personal ringing tone, voice tag, or a thumbnail image to a contact
card. You can create contact groups, which allow you to send text messages or e-mail to
many recipients at the same time.
Contact information can only be sent to or received from compatible devices.
Creating and editing contact cards
1
2
3
•
•
Press
in standby mode or go to Menu → Contacts.
Open Contacts and select Options → New contact.
Fill in the fields you want and press Done.
To edit contact cards, See “Actions common to all applications” on page 14.
To delete contact cards, in the Contacts directory, scroll to the contact card and
select Options → Delete.
Copyright © 2004 Nokia. All rights reserved.
Options in the
Contacts main view: Open,
Call, Create message, New
contact, Open conversation,
Edit, Delete, Duplicate,
Add to group, Belongs to
groups, Mark/Unmark,
Copy to SIM direct., Go to
web address, Send,
Contacts info, SIM
directory, Service numbers,
Settings, Help, and Exit.
Personal information
3. Personal information
Options when
editing a contact card:
Add thumbnail / Remove
thumbnail, Add detail,
Delete detail, Edit label,
Help, and Exit.
25
Personal information
• To attach a small thumbnail image to a contact card, open a contact card, select
Options → Edit and then select Options → Add thumbnail. The thumbnail image is
also shown when the contact is calling you. After you attach a thumbnail image to a
contact card, you can select Add thumbnail to replace the image with a different
thumbnail or Remove thumbnail to remove the thumbnail from the contact card.
• To assign default numbers and addresses to a contact card, open a contact card
and select Options → Defaults. A pop-up window opens, listing the different options.
Copying contacts between the SIM card and phone
memory
• To copy names and numbers from a SIM card to your phone, select Options → SIM
directory, scroll to the name(s) you want to copy and select Options → Copy to
Contacts.
• If you want to copy a phone, fax, or pager number from Contacts to your SIM card,
go to Contacts, open a contact card, scroll to the number, and select Options → Copy
to SIM direct.
Adding a ringing tone for a contact card or group
You can set a ringing tone for each contact card and group. When that contact or group
member calls you, the phone plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your phone recognises it).
1 Press
to open a contact card or go to the Groups list and select a contact group.
2 Select Options → Ringing tone. A list of ringing tones opens.
3 Use the scroll key to select the ringing tone you wish to use for the contact or group
and press Select.
26
Copyright © 2004 Nokia. All rights reserved.
Voice dialling
You can make a phone call by saying a voice tag that has been added to a contact card.
Any spoken word(s) can be a voice tag.
• When recording, hold the phone at a short distance away from your mouth. After the
starting tone, clearly pronounce the word, or words, you want to record as a voice tag.
Before using voice tags, note that:
• Voice tags are not language-dependent. They are dependent on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them in a
quiet environment.
• Very short names are not accepted. Use long names and avoid similar names for
different numbers.
Personal information
• To remove the ringing tone, select Default tone from the list of ringing tones.
Tip! For an individual contact, the phone uses the ringing tone that was assigned
last. So, if you first change a group ringing tone and then the ringing tone of a
single contact that belongs to that group, the ringing tone of the single contact
is used.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Adding a voice tag to a phone number
Voice tags can only be added to phone numbers stored in the phone’s memory. See
“Copying contacts between the SIM card and phone memory” on page 26.
1 In the Contacts main view, scroll to the contact that you want to add a voice tag to,
and press
to open the contact card.
2 Scroll to the number that you want to add the voice tag to, and select Options → Add
voice tag.
Copyright © 2004 Nokia. All rights reserved.
27
Personal information
3 Press Start to record a voice tag. After the starting tone, clearly pronounce the
word(s) you want to record as a voice tag.
4 After recording, the phone plays the recorded tag and the note Playing voice tag is
displayed.
5 When the voice tag has been successfully saved, the note Voice tag saved is displayed
and a beep sounds. A symbol
can be seen next to the number in the contact card.
Making a call by saying a voice tag
1 In standby mode, press and hold
. A short tone is played and the note Speak
now is displayed.
2 When you are making a call by using a voice tag, hold the phone at a short distance
away from your mouth and face and pronounce the voice tag clearly.
3 The phone plays the original voice tag, displays the name and number, and after a few
seconds dials the number of the recognised voice tag.
• If the phone plays the wrong voice tag, or you want to retry voice dialling, press Retry.
Voice dialling cannot be used when a data call or a GPRS connection is active.
Assigning speed dialling keys
Speed dialling is a quick way to call frequently used numbers. You can assign speed
dialling keys to eight phone numbers. Number 1 is reserved for the voice mailbox.
1 Open the contact card for which you want a speed dialling key and select Options →
Assign speed dial. The speed dialling grid opens, showing you the numbers from 1-9.
2 Scroll to a number and press Assign. When you return to the contact information
view, you can see the speed dial icon next to the number.
• To call the contact by speed dialling, go to standby mode and press the speed dialling
key and .
28
Copyright © 2004 Nokia. All rights reserved.
In the Contacts directory, scroll right to the second tab to open the subscribed contacts
list. This list allows you to view presence data, including availability and instant
messaging (chat) status, for all subscribed contacts. See “Presence (Network Service)” on
page 29. See “Chat (Network Service)” on page 98.
Managing contact groups
Creating contact groups
1 In the Contacts directory, press
to open the Groups list.
2 Select Options → New group.
3 Write a name for the group or use the default name Group ... and press OK.
Adding members to a group
Options in the
Subscribed contacts view:
Open, Call, Create message,
Open conversation,
Unsubscribe, Subscribe new,
Mark/Unmark, My Presence,
Settings, Help, and Exit.
Options in the
Groups list view: Open,
New group, Delete,
Rename, Ringing tone,
Contacts info, Settings,
Help, and Exit.
Personal information
Viewing subscribed contacts
1 In the Contacts directory, scroll to the contact you want to add to a group and select
Options → Add to group:. A list of available groups opens.
2 Scroll to the group to which you want to add the contact and press
.
Presence (Network Service)
Use Presence to inform others when, where and how you want to be contacted. Presence
allows you to view and create a dynamic profile of your contact details, visible to other
users of the service, to share information or control services. Presence information can
include your availability, whether you prefer people to call or send messages, where you
are and what you are doing. See Fig. 10‚ on page 30.
Copyright © 2004 Nokia. All rights reserved.
Go to Menu → Extras
→ Presence.
29
Personal information
Options in the
Presence view: Open, My
availability, Viewers,
Update presence, Login,
Logout, Settings, Help, and
Exit.
Before you can use Presence, you need to find a service that you want to use and then
save the settings of that service. You may receive the settings in a special text message,
called a smart message, from the service provider that offers the Presence service. See
“Receiving smart messages” on page 56. For more information, contact your service
provider.
The Presence application allows you to change your own published information and
manage who is authorised to see your presence. To view the presence information of
others, you must use Contacts. See “Contacts” on page 25.
Changing your availability information
Select Options → My availability and select:
• Available - You are available for people to call or send you messages, for example, your
phone is in general profile. See “Profiles” on page 84.
• Busy - You may be available for people to call or send you messages, for example, your
phone is in meeting profile.
• Not available - You are not available for people to call or send you messages, for
example, your phone is in silent profile.
Changing who can view your Presence information
Fig. 10 The Private
Presence view.
30
Select Options → Viewers and select:
• Public pres. - Displays limited information, for managing ways for people to contact
you. This is available to anyone you have not blocked.
• My availability - Select Available, Busy, or Not available.
• Viewers - Opens the Current viewers view of your Public pres.. See “Public viewers” on
page 31.
• Update presence - Updates your presence information to the presence server.
• Login / Logout - Connect to or disconnect from the presence server. See “Chat and
Presence servers” on page 104.
Copyright © 2004 Nokia. All rights reserved.
Personal information
• Settings - To manage the publishing of your presence information.
• Private pres. - Displays private information, so you can share more personal
information. This is only available to those that you have authorised to view your
private information. You can select the following options:
• My availability - Select Available, Busy, or Not available.
• Private message - You can write a text message of up to 40 characters to describe
your current availability.
• My presence logo - You can add a logo to your availability information. Logo files
are stored in the Gallery. See “Gallery” on page 44.
• Viewers - Opens the Private list view of your Private pres.. See “Private viewers” on
page 32.
• Update presence - Updates your presence information to the presence server.
• Login / Logout - Connect to or disconnect from the presence server. See “Chat and
Presence servers” on page 104.
• Settings - To manage the publishing of your presence.
• Blocked pres. - Displays a screen containing no personal details. See “Blocked viewers”
on page 32.
Public viewers
Go to Public pres. and select Options → Viewers → Current viewers to see the names, phone
numbers, or user IDs of the viewers who you do not allow to view your private presence
messages, but who are currently viewing your public presence. You can scroll to a viewer,
press Options, and select:
• Add to private list - Allows the viewer to also see your private presence.
• Block - Prevents the viewer from seeing your presence information.
• Add to contacts - Adds the viewer to your Contacts directory.
• Reload lists - Connect to the presence server to update the viewer lists. This option is
only available when you are offline.
Copyright © 2004 Nokia. All rights reserved.
31
Personal information
Private viewers
Go to Private pres. and select Options → Viewers → Private list to see the names, phone
numbers, or user IDs of the viewers who you allow to view your private presence
messages. To prevent a viewer from seeing your private presence messages, scroll to the
viewer and press
. You can scroll to a viewer, press Options, and select:
• Add new - Add a new viewer manually or from your Contacts directory.
You can only select a contact who has a user ID in the contact card.
• Block - Prevents the viewer from seeing your presence information.
• Add to contacts - Adds the viewer to your Contacts directory.
• Remove from list - Removes the viewer from the private list. The option is available also
when there are marked items as selected. If the list is empty the option is not
available.
• View details - Shows the user ID information of the viewer.
• Reload lists - Connect to the presence server to update the viewer lists. This option is
only available when you are offline.
Blocked viewers
Go to Options → Viewers → Blocked pres. to see the viewers you prevented from seeing
your public and private presence messages. To allow a viewer to see your presence
information, scroll to a viewer and press
. You can scroll to a viewer, press Options,
and select:
• Add to private list - Allows the viewer to also see your private presence.
• Add new - Add a new viewer manually or from your Contacts directory.
You can only select a contact who has a user ID in the contact card.
• Add to contacts - Adds the viewer to your Contacts directory.
• View details - Shows the user ID information of the viewer.
• Reload lists - Connect to the presence server to update the viewer lists. This option is
only available when you are offline.
32
Copyright © 2004 Nokia. All rights reserved.
Go to Menu → Extras → Presence.
Once the connection has been established:
1 Key in your user ID and password and press
to login.
You obtain the user ID and password from your service provider.
2 Select Options → Update presence. The option is available when you are logged into
the server and have changed your presence information in Private pres. or Public pres.
view and not updated it.
3 To logout, select Options → Logout.
Personal information
Updating your Presence information
Presence settings
Select Options → Settings from the Presence main menu.
See “Chat and Presence servers” on page 104.
• Show presence to - Select:
• Private & public - Both public and private presence is published.
• Private viewers - Only private viewers can see your presence information.
• Public viewers - Both public and private viewers see your public presence
information.
• No one - Your presence information is not published.
• Sync. with Profiles - Defines which Presence attributes are changed when you change
your profile. Select:
• Off - The presence attributes are not changed, even if you change your profile.
• On - Both My availability and Private messageare changed when you change your
profile.
• Availability only - Private message is not changed when you change your profile.
• Private msg. only - My availability is not changed when you change your profile.
Copyright © 2004 Nokia. All rights reserved.
33
Personal information
Positioning (Network Service)
Go to Menu → Tools
→ Positioning.
Positioning allows the network to detect the position of your phone. By enabling or
disabling Positioning, you choose when your position information is provided to the
network.
To enable Positioning in your phone, select Settings → Positioning → On.
When you receive a Position request, a message is displayed showing the service that is
making the request. Press Accept to allow your position information to be sent, or press
Reject to deny the request.
Position request messages are logged in the Recv. requests list. To view them, select Menu
→ Positioning → Recv. requests. The icon beside each request indicates whether the
request is new, rejected, or accepted. If you want to see details of a request, scroll to the
request and press
. If you want to clear the Recv. requests list, select Options → Clear
list.
Calendar
In Calendar, you can keep track of your appointments, meetings, birthdays, anniversaries,
and other events. You can also set a calendar alarm to remind you of upcoming events.
Calendar uses shared memory. See “Shared memory” on page 16.
Creating calendar entries
1 Go to Menu → Calendar
2 Select Options → New entry and select:
• Meeting to remind you of an appointment that has a specific date and time.
• Memo to write a general entry for a day.
34
Copyright © 2004 Nokia. All rights reserved.
Personal information
• Anniversary to remind you of birthdays or special dates. Anniversary entries are
repeated every year.
3 Fill in the fields. Use the scroll key to move between fields.
• Subject / Occasion - Write a description of the event.
• Location - The place of a meeting, optional.
• Start time, End time, Start date, and End date.
• Alarm - Press
to activate the fields for Alarm time and Alarm date.
• Repeat - Press
to change the entry to be repeating. Shown with
in the Day
view.
• Repeat until - You can set an ending date for the repeated entry, for example, the
ending date of a weekly course you are taking. This option is shown only if you have
selected to repeat the event.
• Synchronisation - Private - After synchronisation the calendar entry can be seen
only by you and it will not be shown to others even if they have online access to
view the calendar. Public - The calendar entry is shown to others who have access
to view your calendar online. None - The calendar entry will not be copied when
you synchronise your calendar.
4 To save the entry, press Done.
If you are editing or deleting a repeated entry, choose how you want the changes to take
effect: All occurrences - all repeated entries are changed / This entry only - only the current
entry will be changed.
Calendar views
Press
in the Month, Week, or Day views to automatically highlight today’s date.
To write a calendar entry, press any number key (
) in any calendar
view. A Meeting entry is opened and the characters you keyed in are added to the Subject
field.
Copyright © 2004 Nokia. All rights reserved.
Options in the
different calendar views:
Open, New entry, Week
view / Month view, Delete,
Go to date, Send, Settings,
Help, and Exit.
35
Personal information
• To go to a certain date, select Options → Go to date. Write the date and press OK.
• Icons in Day and Week views:
- Memo, and
- Anniversary.
• Synchronisation icons in Month view:
- Private,
- Public,
- None, and
- the day has more than one entry.
To-do
Go to Menu →
To-do.
In To-do you can keep a list of tasks that you need to do. The To-do list uses shared
memory. See “Shared memory” on page 16.
1 To start to write a to-do note, press any digitkey (
). The editor
opens and the cursor blinks after the letters you have keyed in.
2 Write the task in the Subject field. Press
to add special characters.
• To set the due date for the task, scroll to the Due date field and key in a date.
• To set a priority for the to-do note, scroll to the Priority field and press
.
3 To save the to-do note, press Done. If you remove all characters and press Done, the
note will be deleted, even if you edit a previously saved note.
• To open a to-do note, scroll to it and press
.
• To delete a to-do note, scroll to it and select Options → Delete or press
.
• To mark a to-do note as completed, scroll to it and select Options → Mark as done.
• To restore a to-do note, select Options → Mark as not done.
Importing data from compatible Nokia
phones
You can move calendar, contacts, and to-do data from compatible Nokia phones to your
phone using the Nokia PC Suite 6.1 Content Copier application on a compatible PC.
Instructions for using the application can be found in the help function of PC Suite on
the CD-ROM.
36
Copyright © 2004 Nokia. All rights reserved.
Multimedia
4. Multimedia
Camera
With the Camera application you can take pictures and record videos while on the move.
The images are automatically saved in the Gallery application, where you can rename
them and organise them in folders. You can also send images in a multimedia message,
as an e-mail attachment, or via a Bluetooth connection. The camera produces JPEG
images and video clips are recorded in the 3GPP file format with the .3gp file extension.
Press
in
standby mode or go to
Menu → Camera.
Taking pictures
1 Press
in standby mode and press
or
to move to the Image tab. The
Camera application opens and you can see the view to be captured.
You can see the viewfinder and the cropping lines, which show you the image area to
be captured.
You can also see the image counter, which shows you how many images, depending
on the selected picture quality, fit in the memory of your phone or memory card, if
you use one.
2 Press
to zoom in on your subject before taking the picture. Press
to zoom out
again. The zoom indicator on the display shows the zoom level.
Tip! The resolution of a zoomed picture is lower than that of a non-zoomed
picture, but the image remains the same size. You may notice the difference
in image quality if viewed on a PC, for example.
3 To take a picture, press
. Do not move the phone before the Camera application
starts to save the image. The image is saved automatically in the Gallery. See “Gallery”
on page 44.
Copyright © 2004 Nokia. All rights reserved.
Options before
taking a picture: Capture,
Activate night mode / Deact.
night mode, Go to Gallery,
Self-timer, Settings, Help,
and Exit.
37
Multimedia
Tip! To take a photo immediately after another, select Options → Settings →
Image → Show captured image. Select No. The photos do not remain on the display
after being taken, are saved in the Gallery, and the camera is ready for use again.
Camera goes into battery saving mode if there have been no key presses within a minute.
To continue taking pictures, press
.
Options after a
picture has been taken:
New, Delete, Send, Set as
wallpaper, Rename image,
Go to Gallery, Settings, Help,
and Exit.
After the image has been saved:
• If you do not want to save the image, select Options → Delete.
• To return to the viewfinder to take a new picture, press
.
You can insert an image into a contact card. See “Creating and editing contact cards” on
page 25.
Self-timer
Use the self-timer to delay the taking of a picture, so that you can include yourself in the
picture.
1 Select Options → Self-timer.
2 Select the delay 10 seconds, 20 seconds, or 30 seconds.
3 Press Activate. The camera will take the picture after the selected delay has elapsed.
Settings
In the Camera application settings, you can adjust the image quality setting, select
whether photos remain on the display after being taken, change the default image name,
and change the memory location of saved images.
1 Select Options → Settings → Image.
2 Scroll to the setting you want to change:
• Image quality - High, Normal, and Basic. The better the image quality, the more
memory the image consumes.
• Show captured image - To take a photo immediately after another, select No. The
photos do not remain on the display after being taken, are saved in the Gallery, and
the camera is ready for use again.
38
Copyright © 2004 Nokia. All rights reserved.
Multimedia
• Default image name - By default, Camera names images in the format ‘Image.jpg’.
Default image name allows you to set a name for the images stored.
• Memory in use - Select whether you want to store your images in the phone memory
or on the memory card, if you use one.
Recording videos
Press Camera in standby mode and press
or
to move to the Video tab.
• Press
to start recording.
• To pause recording at any time, press
. Press
again, to resume recording.
• Press
to zoom in on your subject before, or during, recording. Press
to zoom
out again.
• Press
to stop recording.
Options before
recording a video: Record,
Activate night mode / Deact.
night mode, Mute / Unmute,
Go to Gallery, Settings, Help,
and Exit.
The video clip is saved to either the phone’s memory or the memory card, depending on
the setting of your Memory in use. See “Setting up your Video recorder” on page 39.
• To immediately play the video clip you just recorded, select Options → Play.
• To play previously saved video clips, go to the Gallery. See “Gallery” on page 44.
Setting up your Video recorder
Use the following settings to define how videos are recorded.
1 Select Options → Settings → Video.
2 Scroll to the setting you want to change:
• Length - Select:
• Maximum - The length of the video recording is restricted to 10 minutes.
• Short - To record video clips up to 95 kB in size, which relates to approximately
10 seconds in duration, so that they can be conveniently sent as a multimedia
message.
• Video resolution - Select 128x96 or 176x144.
• Default video name - Define a default name.
Copyright © 2004 Nokia. All rights reserved.
Options after you
have recorded a video:
New, Play, Delete, Send,
Rename, Go to Gallery,
Settings, Help, and Exit.
39
Multimedia
• Memory in use - Define the memory store. Choices are phone’s memory or memory
card, if one is used.
Viewing images
Pictures taken with the Camera application are stored as images in the Gallery. See
“Gallery” on page 44. Images can be sent to you in a multimedia or picture message, as
an e-mail attachment, or via Bluetooth. After receiving an image in Inbox, you need to
save it in the phone memory or on a memory card. You can save graphics sent to you in
picture messages to the Picture messages folder. See “Picture messages folder” on
page 45.
Options when
viewing an image: Send,
Set as wallpaper, Rotate,
Zoom in/Zoom out, Full
screen, Delete, Rename,
View details, Add to 'Go to',
Help, and Exit.
Select an image from the list of images in the Images folder in the Gallery to start the
image viewer and display the image.
When viewing an image, pressing
the current folder.
or
takes you to the next or previous image in
In the images thumbnail view:
1 Press
or
to move between the phone and memory card.
2 To browse the list of images, press
and
.
3 Press
to open an image. When the image is open, you can see the name of the
image.
You can view animated GIF files in the same way as other images.
Zooming on a saved image
1 Select Options → Zoom in or Zoom out. You can see the zooming ratio at the top of
the display. See “Keyboard shortcuts” on page 41.
2 Press
to return to the initial view. The zooming ratio is not stored permanently.
40
Copyright © 2004 Nokia. All rights reserved.
Multimedia
Full screen
When you select Options → Full screen, the panes around the image are removed so that
you can see more of the image. Press
to return to the initial view.
Moving the focus
When you are zooming an image, use the scroll key to move the focus to the left, right,
up, or down, so that you can take a closer look at one part of the image, for example, its
upper right corner.
Keyboard shortcuts
• Rotate 90 degrees:
- anticlockwise,
- clockwise. The rotation status is
not stored permanently.
•
- zoom in,
- zoom out, press and hold to return to the normal view.
•
- change between full screen and normal view.
RealPlayer™
With RealPlayer™, you can play local media files stored in the phone memory, or memory
card, or stream media files over the air from a streaming link. The streaming link can be
activated during a browsing session or stored in the phone memory, or memory card.
Go to Menu →
RealPlayer.
Media files are video, music or audio clips. Files with the extensions .3gp, .amr, .mp4, .ra,
.rv, .rm and .ram are supported by RealPlayer.
RealPlayer does not necessarily support all file formats or all the variations of a file
formats. For example, RealPlayer will attempt to open all .mp4 files. However, some .mp4
files may include content that is not compliant with 3GPP standards and, therefore, is not
supported by this phone. In this case, the operation might fail and result in partial
playback or in an error message.
RealPlayer uses shared memory. See “Shared memory” on page 16.
Copyright © 2004 Nokia. All rights reserved.
41
Multimedia
Options in
RealPlayer when a clip has
been selected (the
available options may
vary): Play, Continue, Stop,
Mute, Unmute, Clip details,
Send, Settings, Help, and
Exit.
Playing media files
• To play a media file stored in your phone’s memory or memory card, select Options
→ Open and:
• Most recent clips - To play one of the last 6 files played in RealPlayer, or
• Saved clip - To play a file saved in the Gallery. See “Gallery” on page 44.
Scroll to a file and press
to play the file.
• To stream content over the air:
• Select a streaming link saved in the Gallery. Before your live content begins
streaming, your phone will connect to the site and load the file.
• Open the link to a file in the browser.
To stream live content, you must first configure your default access point. See “Access
points” on page 70.
Many service providers will require you to use an Internet Access Point (IAP) for your
default access point. Other service providers allow you to use a WAP access point.
Contact your service provider for more information.
In RealPlayer, you can only open an rtsp:// URL address. You cannot open an http:// URL
address, however RealPlayer will recognise an http link to a .ram file since a .ram file is
a text file containing a rtsp link.
Shortcuts during play
When a media file is playing use the scroll key to seek (move quickly through the media
file), and to mute the sound, as follows:
Fig. 11 The RealPlayer
main view.
42
Press and hold
the media file.
to seek forwards, or press and hold
Press and hold
until the
Press and hold
until you see the
to seek backwards through
indicator is displayed to mute the sound.
indicator to turn on the sound.
Copyright © 2004 Nokia. All rights reserved.
Multimedia
Changing the settings
Select Options → Settings then either Video, Audio or Connection.
Select Video to change the following settings:
• Contrast - Open the slider view to change the contrast.
• Repeat - Choose On to have the playing video file restart automatically once it has
finished.
Select Audio to change the following settings:
• Repeat - Choose On to have the playing audio file restart automatically once it has
finished.
• Random play - Choose On to select a random order for playlist items.
Select Connection to change the connection settings.
Movie director
Use Movie director to create edited video clips which may contain video, sound, and text.
Editing is carried out automatically according to the style that you select. The style
determines the transitions and visual effects that are used in the video clip.
Open Movie director and press
tab.
or
to move between the
Go to Menu → Movie
director.
tab and the
In the
tab, you can select:
• Quick muvee - Creates video clips suitable to be sent via multimedia (MMS). You can
select several video clips and the style you want to apply to them. The duration of the
Quick muvee video clip is typically less than 10 seconds.
• Custom muvee - You can select video clips and apply a style, music and message, set
the duration and preview the video clip before saving. Define the following:
Copyright © 2004 Nokia. All rights reserved.
43
Multimedia
• Video - Select the source file or files you want to use. Select Mark/Unmark, Play or
Capture.
• Style - Select a style from the list. Styles determine the effects and message
caption. Each style is associated with default music and message text.
• Music - Select a music clip from the list.
• Message - Adds a caption to the beginning and ending of the video clip. You can
enter a message or select one from the template. You can edit the default message
text.
• Create muvee - You are prompted to set the duration for the video clip. Select
Multimedia message to create a video size suitable to be sent via MMS, Same as
music to create a video of the same duration as the selected music clip or User
defined to manually enter the video duration.
After the video preview is prepared the Preview muvee view opens, where you can
Play, Recreate (to make a new variation of the video clip) and Save the new video
clip.
• Style downloads - Download and install new styles.
• Settings - Scroll to the setting you want to change:
• Memory in use - Select Phone memory or Memory card
• Resolution - Select High, Low or Automatic
• Default muvee name - Enter a default name for your video clips.
The
tab contains a list of video clips that you can Play, Send, Rename andDelete.
Gallery
Go to Menu →
Gallery.
Use the Gallery to store and organise your images, sound clips, playlists, and video clips,
streaming links and RAM files.
Gallery uses shared memory. See “Shared memory” on page 16.
44
Copyright © 2004 Nokia. All rights reserved.
to see the
Multimedia
Open the Gallery to see a list of the folders in the phone memory. Press
folders on the memory card, if you use one.
Select a folder Images, Sound clips, or Video clips (or other folder that you have created)
and press
to open it.
In the open folder you can see:
• an icon depicting the type of each file in the folder, or in the case of an image, a small
thumbnail picture; a preview of the image
• the name of the file
• the date and time a file was saved or the size of the file
• subfolders, if present.
You can browse, open, and create folders, mark, copy and move items to folders. See
“Actions common to all applications” on page 14. The options vary according to the
content of the list of media files.
Opening files
Select any file and press
to open it. Each file will open in its corresponding
application as follows:
• Images - Open in the Image viewer. See “Viewing images” on page 40.
• Sound clips - Open and play in the RealPlayer application. See “RealPlayer™” on
page 41.
• Video clips, RAM files, and streaming links - Open and play in the RealPlayer
application. See “RealPlayer™” on page 41.
• Subfolders - Open to display contents.
Options: Open
(folder or item), Send,
Delete, Create new, Move to
folder, Copy to folder, New
folder, Mark/Unmark, Edit,
Rename, Gallery downloads,
Image uploader, View
details, Add to 'Go to',
Settings, Help, and Exit.
Other default folders
Picture messages folder
Use this folder to store pictures sent to you in picture messages.
Copyright © 2004 Nokia. All rights reserved.
45
Multimedia
Options in the
Picture messages folder:
Open, Send, Delete, Mark/
Unmark, Rename, View
details, Help, and Exit.
• Select the folder Images → Picture msgs..
To save a picture that you have received in a picture message, go to Messaging → Inbox,
open the message, and select Options → Save picture.
Wallpapers folder
Use this folder to store pictures that you want to use as background images for
multimedia messages.
• Select the folder Images → Wallpapers.
Presence logos folder
Use this folder to store logos for Presence. See “Presence (Network Service)” on page 29.
• Select the folder Images → Presence logos..
Downloading files
To download files into the Gallery using the browser:
• Select Options → Gallery downloads and choose from Graphic downloads, Video
downloads, or Tone downloads. The browser opens and you can choose a bookmark for
the site to download from. See “Viewing bookmarks” on page 110.
To download files, you must first configure your default access point. See “Access points”
on page 70.
Once items have been downloaded, the browser closes and the phone returns to the
Gallery view.
46
Copyright © 2004 Nokia. All rights reserved.
You can send your pictures to an image server to allow others to share your pictures
online.
Before you can upload images, you must enter the settings for the image server. See
“Setting up the image server” on page 47. You can get these settings from your service
provider.
1 Select Options → Image uploader.
2 To begin an upload, mark the images and select Upload.
3 Enter a name for the folder on the image server that the images will be stored in and
press
.
Multimedia
Uploading images to an image server (Network Service)
Setting up the image server
1 Select Settings → Image servers and press
“Access points” on page 70.
2 Press
.
. Fill in the details for each field. See
Copyright © 2004 Nokia. All rights reserved.
47
Messaging
5. Messaging
Go to Menu →
Messaging.
In Messaging you can create, send, receive, view, edit, and organise: text messages,
multimedia messages, e-mail messages, and smart messages. Smart messages are special
text messages that can be picture messages, or messages containing ring tones,
configuration settings, bookmarks, contact details or calendar items. You can also receive
messages and data via a Bluetooth connection, receive service messages, cell broadcast
messages, and send service commands.
Note: Picture message function can be used only if it is supported by your
network operator or service provider. Only devices that offer picture message
features can receive and display picture messages.
Text messages and multimedia messages (MMS) use shared memory. See “Shared
memory” on page 16.
Options in the
Messaging main view:
Create message, Connect
(shown if you have defined
settings for the mailbox),
or Disconnect (shown if
there is an active
connection to the
mailbox), SIM messages,
Cell broadcast, Service
command, Settings, Help,
and Exit.
48
When you open Messaging, you can see the New message function and a list of default
folders:
Inbox - Contains received messages except e-mail and cell broadcast messages.
E-mail messages are stored in the Mailbox. You can read cell broadcast messages by
selecting Options → Cell broadcast.
My folders - For organising your messages into folders.
Mailbox - When you open this folder, you can either connect to your remote
mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail
messages offline. After you have defined settings for a new mailbox, the name given to
that mailbox will replace Mailbox in the main view. See “Settings for e-mail” on page 64.
Copyright © 2004 Nokia. All rights reserved.
Sent - Stores the last 20 messages that have been sent. You can change the
number of messages to be saved. See “Settings for the Other folder” on page 66.
Messages or data that have been sent via a Bluetooth connection are not saved in the
Draft or Sent folders.
Messaging
Drafts - Stores draft messages that have not been sent.
Outbox - Is a temporary storage place for messages waiting to be sent.
Reports (Network Service) - You can request the network to send you a delivery
report of the text messages, smart messages, and multimedia messages you have sent. To
turn on delivery report reception, select Options → Settings → Text message or Multimedia
message, scroll to Receive report, and select Yes.
Receiving a delivery report of a multimedia message that has been sent to an e-mail
address might not be possible.
Note: When sending messages, your device may display the words Data sent. This
is an indication that the message has been sent by your device to the message
centre number programmed into your device. This is not an indication that the
message has been received at the intended destination. For more details about
messaging services, check with your service provider.
Before you create a multimedia message, write an e-mail, or connect to your remote
mailbox, you must have the correct connection settings in place. See “Settings needed
for e-mail” on page 55. See “Settings needed for multimedia messaging” on page 54.
Copyright © 2004 Nokia. All rights reserved.
49
Messaging
50
Writing text
Using traditional text input
The indicator
is shown on the top right of the display when you are writing text
using traditional text input.
• Press a number key (
), repeatedly until the desired character appears.
Note that there are more characters available for a number key than are printed on
the key.
Icons:
and
indicate the selected case.
means that the
first letter of the next word is written in upper case, and all other letters will
automatically be written in lower case.
indicates number mode.
• To insert a number, press and hold the number key.
To switch between letter and number mode, press and hold
.
• If the next letter is located on the same key as the present one, wait until the cursor
appears (or press
to end the time-out period), and then key in the letter.
• If you make a mistake, press
to remove a character. Press and hold
to clear
more than one character.
• The most common punctuation marks are available under
. Press
repeatedly to reach the desired punctuation mark.
Press
to open a list of special characters. Use the scroll key to move through
the list and press Select to select a character.
• To insert a space, press
. To move the cursor to the next line, press
three times.
• To switch between upper and lower case, press
.
Copyright © 2004 Nokia. All rights reserved.
Messaging
Using predictive text input
You can key in any letter with a single keypress using the predictive text input. To activate
predictive text input, press
and select Dictionary on. This will activate predictive text
input for all editors in the phone. The
indicator is shown at the top of the display.
See Fig. 12‚ on page 51.
1 Write the desired word by pressing the keys
. Press each key only once for
one letter. The word changes after every key press.
For example, to write ‘Nokia’ when the English dictionary is selected, press
for N,
for o,
for k,
for i, and
for a.
The word suggestion changes after each key press. See Fig. 12‚ on page 51.
2 When you have finished the word, check that it is correct.
• If the word is correct, you can confirm it by pressing
or by pressing
to insert a space. The underlining disappears and you can begin to write a new
word.
• If the word is not correct, you have the following options:
• Press
repeatedly to view the matching words the dictionary has found
one by one.
• Press
and select Dictionary → Matches to view a list of matching words. Scroll
to the word you want to use and press
to select it.
• If the ? character is shown after the word, the word you intended to write is not in
the dictionary. To add a word to the dictionary, press Spell, key in the word (max.
32 letters) using traditional text input, and press OK. The word is added to the
dictionary. When the dictionary becomes full, a new word replaces the oldest added
word.
• To remove the ? and clear characters one by one from the word, press
.
Copyright © 2004 Nokia. All rights reserved.
Fig. 12 Predictive text
input.
51
Messaging
Tips on using predictive text input
• To erase a character, press
. Press and hold
to clear more than one
character.
• To change between the different character cases Abc, abc, and ABC, press
. Note
that if you press
twice quickly the predictive text input is turned off.
• To insert a number in letter mode, press and hold the desired number key, or press
and select number mode, key in the numbers you want, and press OK.
• The most common punctuation marks are available under
. Press
repeatedly to reach the desired punctuation mark.
Press
to open a list of special characters. Use the scroll key to scroll through
the list and press Select to select a character. Or press
and select Insert symbol.
The predictive text input will try to guess which commonly used punctuation mark
(.,?!‘) is needed. The order and availability of the punctuation marks depend on the
language of the dictionary.
• Press
repeatedly to view the matching words the dictionary has found one by
one.
When a word has been entered with predictive text on, you can press
, select
Dictionary and select:
• Matches - To view a list of words that correspond to your key presses. Scroll to the
desired word and press
.
• Insert word - To add a word (max. 32 letters) to the dictionary by using traditional text
input. When the dictionary becomes full, a new word replaces the oldest added word.
• Edit word - To open a view where you can edit the word, available only if the word is
active (underlined).
• Off - To turn off predictive text input for all editors in the phone.
Writing compound words
• Write the first half of a compound word and confirm it by pressing
. Write the last
part of the compound word and complete the compound word by pressing
to add a space.
52
Copyright © 2004 Nokia. All rights reserved.
Messaging
Copying text to the clipboard
If you want to copy text to the clipboard, the following are the easiest methods:
1 To select letters and words, press and hold
. At the same time, press
or
.
As the selection moves, text is highlighted.
To select lines of text, press and hold
. At the same time press
or
.
2 To end the selection, release pressing the scroll key while still holding
.
3 To copy the text to the clipboard, while still holding
, press Copy.
Or, release
and then press it once to open a list of editing commands, for example,
Copy or Cut.
If you want to remove the selected text from the document, press
.
4 To insert the text into a document, press and hold
and press Paste.
Or, press
once and select Paste.
Writing and sending messages
Before you can create a multimedia message, or write an e-mail, or connect to your
remote mailbox, you must have the correct connection settings in place. See “Settings
needed for e-mail” on page 55. See “Settings needed for multimedia messaging” on
page 54.
1 Select New message. A list of message options opens. Select:
• Create: → Text message if you want to create a text message
To send a picture message, select Options → Insert → Picture.
Each picture message is made up of several text messages. Therefore, sending one
picture message may cost more than sending one text message.
• Create: → Multimedia message if you wish to send a multimedia message (MMS).
Copyright protections may prevent some images, ringing tones, and other content
from being copied, modified, transferred or forwarded.
• Create: → E-mail to send e-mail. If you have not set up your e-mail account, you
will be prompted to do so.
Copyright © 2004 Nokia. All rights reserved.
Options in the text
message editor: Send, Add
recipient, Insert, Delete,
Check contacts, Message
details, Sending options,
Help, and Exit.
53
Messaging
Tip! Start to key in
a name in the To: field and
select Options → Check
contacts. The phone will
retrieve all matching
entries from the Contacts
directory. If only one entry
is found, it is added
automatically. If more
than one entry is found,
select a contact from the
list.
54
2 Press
to select the recipient(s) from the Contacts directory or write the phone
number or e-mail address of the recipient in the To: field if you are sending an MMS
or e-mail to the recipient. Press
to add a semicolon (;) to separate each recipient.
3 Press
to move to the message field.
4 Write the message.
Your device supports the sending of text messages beyond the normal 160-character
limit. If your message exceeds 160 characters, it will be sent as a series of two or more
messages. Therefore, sending a message that exceeds 160 characters may cost more.
Note that using special (Unicode) characters such as ë, â, á, ì including Chinese
characters take up more space.
In the navigation bar, you can see the message length indicator counting backwards
from 160. For example, 10 (2) means that you can still add 10 characters for the text
to be sent as two messages.
• To add a media object to a multimedia message, select Options → Insert new →
Image, Sound clip, Video clip or Slide. Select the item you wish to add.
5 To send the message, select Options → Send or press
.
Settings needed for multimedia messaging
You may receive the settings as a smart message from your network operator or service
provider. See “Receiving smart messages” on page 56.
For availability of and subscription to data services, please contact your network operator
or service provider.
• Go to Messaging → Options → Settings → Multimedia message. Open Access point in
use and select the access point you created. See “Settings for multimedia messages”
on page 62.
Copyright © 2004 Nokia. All rights reserved.
Messaging
Settings needed for e-mail
Before you can send, receive, retrieve, reply to, and forward e-mail to a separate e-mail
account, you must:
• Configure an Internet Access Point (IAP) correctly. See “Connection settings” on
page 70.
• Define your e-mail settings correctly. See “Settings for e-mail” on page 64.
Follow the instructions given by your remote mailbox and Internet service provider.
Inbox - receiving messages
When there are unread messages in Inbox, the icon changes to
.
In Inbox, the message icons tell you what kind of a message it is. Here are some of the
icons that you may see:
for an unread text message and
for an unread smart message
for an unread multimedia message
Options in Inbox:
Open, Create message,
Delete, Message details,
Move to folder, Mark/
Unmark, Help, and Exit.
for an unread service message
for data received via Bluetooth
for an unknown message type.
Viewing multimedia objects
• To see what kinds of media objects have been included in the multimedia message,
open the message and select Options → Objects. In the Objects view you can view
files that have been included in the multimedia message. You can choose to save the
file in your phone or to send it, for example, via Bluetooth to another compatible
device.
Copyright © 2004 Nokia. All rights reserved.
Options in the
Objects view: Open, Save,
Send, Help, and Exit.
55
Messaging
Important: Multimedia message objects may contain viruses or otherwise be
harmful to your device or PC. Do not open any attachment if you are not sure
of the trustworthiness of the sender.
See “Certif. management” on page 78.
Receiving smart messages
Your phone can receive many kinds of smart messages, text messages that contain data
(also called Over-The-Air (OTA) messages). To open a received smart message, open Inbox,
scroll to the smart message (
), and press
.
• Picture message - To save the picture in the Picture messages folder in the Gallery for
later use, select Options → Save picture.
• Business card - To save the contact information, select Options → Save business card.
Tip: If certificates or sound files are attached to business cards, they will not
be saved.
• Ringing tone - To save the ringing tone to the Gallery, select Options → Save.
• Operator logo - To save the logo, select Options → Save. The operator logo can now
be seen in standby mode instead of the network operator’s own identification.
• Calendar entry - To save the invitation to Calendar, select Options → Save to Calendar.
• Web message - To save the bookmark, select Options → Save to bookmarks. The
bookmark is added to the Bookmarks list in browser services.
If the message contains both browser access point settings and bookmarks, to save
the data select Options → Save all. Or, select Options → View details to view the
bookmark and access point information separately. If you do not want to save all data,
select a setting or bookmark, open the details, and select Options → Save to Settings
or Save to bookmarks depending on what you are viewing.
• E-mail notification - Tells you how many new e-mails you have in your remote mailbox.
An extended notification may list more detailed information such as subject, sender,
attachments, and so on.
56
Copyright © 2004 Nokia. All rights reserved.
Messaging
• In addition, you can receive a text message service number, voice mailbox number,
profile settings for remote synchronisation, access point settings for the browser,
multimedia messaging or e-mail, access point login script settings, or e-mail settings.
To save the settings, select Options → Save to SMS sett., Save to Voice mail, Save to
Settings, or Save to e-mail sett..
Receiving service messages (Network Service)
Service messages are notifications of, for example, news headlines and they may contain
a text message or address of a browser service. For availability and subscription, contact
your service provider.
My folders
In My folders you can organise your messages into folders, create new folders, and
rename and delete folders.
Remote mailbox (Network Service)
When you open this folder, you can either connect to your remote mailbox to:
• retrieve new e-mail headings or messages, or
• view your previously retrieved e-mail headings or messages offline.
If you select New message → Create: → E-mail or Mailbox in the Messaging main view and
you have not set up your e-mail account, you will be prompted to do so. See “Settings
needed for e-mail” on page 55.
When you create a new mailbox, the name you give to the mailbox automatically
replaces Mailbox in the Messaging main view. You can have several mailboxes (max. six).
Copyright © 2004 Nokia. All rights reserved.
57
Messaging
Opening the mailbox
When you open the mailbox, you can choose whether you want to view the previously
retrieved e-mail messages and e-mail headings offline or connect to the e-mail server.
• When you scroll to your mailbox and press
, the phone asks you if you want to
Connect to mailbox? Select Yes to connect to your mailbox or No to view previously
retrieved e-mail messages offline.
• Another way to start a connection is to select Options → Connect.
Retrieving e-mail messages from the mailbox
• If you are offline, select Options → Connect to start a connection to a remote
mailbox.
1 When you have an open connection to a remote mailbox, select Options → Retrieve
e-mail →:
• New - To retrieve all new e-mail messages to your phone.
• Selected - To retrieve only the e-mail messages that have been marked. Use the
Mark/Unmark → Mark / Unmark commands to select messages one by one. See
“Actions common to all applications” on page 14.
• All - To retrieve all messages from the mailbox.
To cancel retrieving, press Cancel.
2 After you have retrieved the e-mail messages, you can continue viewing them online.
Select Options → Disconnect to close the connection and to view the e-mail messages
offline.
3 To open an e-mail message, scroll to the e-mail you want to view and press
. If
the e-mail message has not been retrieved (arrow in the icon is pointing outwards)
and you are offline and select Open, you will be asked if you want to retrieve this
message from the mailbox.
58
Copyright © 2004 Nokia. All rights reserved.
Messaging
• To view e-mail attachments, open a message that has the attachment indicator
and select Options → Attachments. In the Attachments view, you can retrieve,
open, or save attachments, in supported formats. You can also send attachments
via Bluetooth.
If your mailbox uses the IMAP4 protocol, you can decide whether to retrieve e-mail
headings only, messages only, or messages and attachments. With the POP3
protocol, the options are e-mail headings only or messages and attachments. See
“Settings for e-mail” on page 64.
Important: Multimedia message objects may contain viruses or otherwise be
harmful to your device or PC. Do not open any attachment if you are not sure
of the trustworthiness of the sender.
Deleting e-mail messages
• To delete an e-mail from the phone while still retaining it in the remote mailbox:
Select Options → Delete → Phone only.
The phone mirrors the e-mail headings in the remote mailbox. So, although you delete
the message content, the e-mail heading stays in your phone. If you want to remove the
heading as well, you have to first delete the e-mail message from your remote mailbox
and then make a connection from your phone to the remote mailbox again to update the
status.
• To delete an e-mail from both the phone and the remote mailbox:
Select Options → Delete → Phone and server.
If you are offline, the e-mail will be deleted first from your phone. During the next
connection to the remote mailbox, it will be automatically deleted from the remote
mailbox.
If you are using the POP3 protocol, messages marked to be deleted are removed only
after you have closed the connection to the remote mailbox.
Copyright © 2004 Nokia. All rights reserved.
59
Messaging
Undeleting e-mail messages when offline
To cancel deleting an e-mail from both the phone and server, scroll to an e-mail that has
been marked to be deleted during the next connection (
), and select Options →
Undelete.
Disconnecting from mailbox
When you are online, select Options → Disconnect to end the data call or GPRS
connection to the remote mailbox.
Outbox
Outbox is a temporary storage place for messages that are waiting to be sent.
Status of the messages in Outbox:
• Sending - A connection is being made and the message is being sent.
• Waiting / Queued - For example, if there are two similar types of messages in Outbox,
one of them is waiting until the first one is sent.
• Resend at ... (time) - Sending has failed. The phone will try to send the message again
after a time-out period. Press Send if you want to restart the sending immediately.
• Deferred - You can set documents to be ‘on hold’ while they are in Outbox. Scroll to a
message that is being sent and select Options → Defer sending.
• Failed - The maximum number of sending attempts has been reached. If you were
trying to send a text message, open the message and check that the Sending settings
are correct.
Viewing messages on a SIM card
Before you can view SIM messages, you need to copy them to a folder in your phone. See
“Actions common to all applications” on page 14.
60
Copyright © 2004 Nokia. All rights reserved.
You may be able to receive messages on various topics, such as weather or traffic
conditions from your service provider. For available topics and relevant topic numbers,
contact your service provider. In the main view you can see:
• the status of the topic:
- for new, subscribed messages and
- for new,
unsubscribed messages.
• the topic number, topic name, and whether it has been flagged ( ) for follow-up.
You will be notified when messages belonging to a flagged topic have arrived.
A packet data (GPRS) connection may prevent cell broadcast reception. Contact your
network operator for the correct GPRS settings.
In the Messaging
main view, select Options
→ Cell broadcast.
Messaging
Cell broadcast (Network Service)
Options in Cell
broadcast: Open, Subscribe
/Unsubscribe, Hotmark /
Remove hotmark, Topic,
Settings, Help, and Exit.
Service command editor
Select Messaging → Options → Service command. Key in and send service requests (also
known as USSD commands) such as activation commands, for network services, to your
service provider.
Messaging settings
Settings for text messages
Go to Messaging and select Options → Settings → Text message to open the following
list of settings:
• Message centres - Lists all the message centres that have been defined.
Copyright © 2004 Nokia. All rights reserved.
61
Messaging
Options when
editing message centre
settings: New msg. centre,
Edit, Delete, Help, and Exit.
• Msg. centre in use (Message centre in use) - Defines which message centre is used for
delivering text messages and smart messages such as picture messages.
• Receive report (delivery report) - When this network service is set to Yes, the status of
the sent message (Pending, Failed, Delivered) is shown in the Reports (Network Service).
Receiving a delivery report of a multimedia message that has been sent to an e-mail
address might not be possible.
• Message validity - If the recipient of a message cannot be reached within the validity
period, the message is removed from the message service centre. Note that the
network must support this feature. Maximum time is the maximum amount of time
allowed by the network.
• Message sent as - The options are Text, Fax, Paging, and E-mail. For further information,
contact your network operator.
Tip: Change this option only if you are sure that your message centre is able
to convert text messages into these other formats.
• Preferred connection - You can send text messages via the normal GSM network or via
GPRS, if supported by the network.
• Reply via same ctr. (network service) - By setting this option to Yes, if the recipient
replies to your message, the return message is sent using the same message service
centre number. Note that this may not work between all operators.
Settings for multimedia messages
Go to Messaging and select Options → Settings → Multimedia message to open the
following list of settings:
• Access point in use (Must be defined) - Select which access point is used as the
preferred connection for the multimedia message centre. See “Settings needed for
multimedia messaging” on page 54.
62
Copyright © 2004 Nokia. All rights reserved.
Messaging
If you receive multimedia message settings in a smart message and save them, the
received settings are automatically used for the Access point. See “Receiving smart
messages” on page 56.
• Multimedia reception - Select:
• Only in home net. - If you want to receive multimedia messages only when you are
in your home network. When you are outside your home network, multimedia
message reception is turned off.
• Always on - If you always want to receive multimedia messages.
• Off - If you do not want to receive multimedia messages or advertisements at all.
Tip: If the settings Only in home net. or Always on have been selected, your phone
can make an active data call or GPRS connection without your knowledge.
• On receiving msg. - Select:
• Retr. immediately - If you want the phone to try to retrieve multimedia messages
instantly. If there are messages with Deferred status, they will be retrieved as well.
• Defer retrieval - If you want the multimedia messaging centre to save the message
to be retrieved later. When you want to retrieve the message, set On receiving msg.
to Retr. immediately.
• Reject message - If you want to reject multimedia messages. The multimedia
message centre will delete the messages.
• Allow anon. messages - Select No, if you want to reject messages coming from an
anonymous sender.
• Receive adverts - Define whether you want to allow reception of multimedia message
advertisements or not.
• Reports - Set to Yes, if you want the status of the sent message (Pending, Failed,
Delivered) to be shown in the Reports.
• Deny report sending - Choose Yes, if you do not want your phone to send delivery
reports of received multimedia messages.
Copyright © 2004 Nokia. All rights reserved.
63
Messaging
• Message validity (Network Service) - If the recipient of a message cannot be reached
within the validity period, the message is removed from the multimedia message
centre. Maximum time is the maximum amount of time allowed by the network.
• Image size - Define the size of the image in a multimedia message. The options are:
Small (max. of 160 x 120 pixels) and Large (max. 640 x 480 pixels).
Settings for e-mail
Go to Messaging and select Options → Settings → E-mail.
Open Mailbox in use to select which mailbox you want to use.
Settings for Mailboxes
Options when
editing e-mail settings:
Editing options, New
mailbox, Delete, Help, and
Exit.
64
Select Mailboxes to open a list of mailboxes that have been defined. If no mailboxes have
been defined, you will be prompted to do so. The following list of settings is shown (this
information is available from your e-mail service provider):
• Mailbox name - Write a descriptive name for the mailbox.
• Access point in use (Must be defined) - The Internet Access Point (IAP) used for the
mailbox. Choose an IAP from the list. See “Connection settings” on page 70.
• My e-mail address (Must be defined) - Write the e-mail address given to you by your
service provider. The address must contain the @ character. Replies to your messages
are sent to this address.
• Outgoing mail server: (Must be defined) - Write the IP address or host name of the
computer that sends your e-mail.
• Send message (Network Service) - Define how e-mail is sent from your phone.
Immediately - A connection to the mailbox is started immediately after you have
selected Send. During next conn. - E-mail is sent when you connect to your remote
mailbox the next time.
• Send copy to self - Select Yes to save a copy of the e-mail to your remote mailbox and
to the address defined in My e-mail address.
Copyright © 2004 Nokia. All rights reserved.
Messaging
• Include signature - Select Yes if you want to attach a signature to your e-mail
messages and to start to write or edit a signature text.
• User name: - Write your user name, given to you by your service provider.
• Password: - Write your password. If you leave this field blank, you will be prompted
for the password when you try to connect to your remote mailbox.
• Incoming mail server: (Must be defined) - The IP address or host name of the computer
that receives your e-mail.
• Mailbox type: - Defines the e-mail protocol your remote mailbox service provider
recommends. The options are POP3 and IMAP4.
This setting can be selected only once and cannot be changed if you have saved or
exited from the mailbox settings.
• Security - Used with the POP3, IMAP4, and SMTP protocols to secure the connection
to the remote mailbox.
• APOP secure login - Used with the POP3 protocol to encrypt the sending of passwords
to the remote e-mail server. Not shown if IMAP4 is selected for Mailbox type:.
• Retrieve attachments (not shown if the e-mail protocol is set to POP3) - To retrieve email with or without attachments.
• Retrieve headers - To limit the number of e-mail headers you want to retrieve to your
phone. The options are All and User defined. Used with the IMAP4 protocol only.
Settings for service messages
When you go to Messaging and select Options → Settings → Service message, the
following list of settings opens:
• Service messages - Choose whether or not you want to allow reception of service
messages.
• Authentic. needed - Choose if you want to receive service messages only from
authorised sources.
Copyright © 2004 Nokia. All rights reserved.
65
Messaging
Settings for Cell broadcast (Network Service)
Check with your service provider whether Cell broadcast is available and what the
available topics and related topic numbers are. Go to Messaging → Options → Settings
→ Cell broadcast to change the settings:
• Reception - On or Off.
• Language - All allows you to receive cell broadcast messages in every possible
language. Selected allows you to choose in which languages you wish to receive cell
broadcast messages. If the language you prefer could not be found in the list, select
Other.
• Topic detection - If you receive a message that does not belong to any of the existing
topics, Topic detection → On allows you to save the topic number automatically. The
topic number is saved to the topic list and shown without a name. Choose Off if you
do not want to save new topic numbers automatically.
Settings for the Other folder
Go to Messaging and select Options → Settings → Other to open the following list of
settings:
• Save sent messages - Choose if you want to save a copy of every text message,
multimedia message, or e-mail that you have sent to the Sent items folder.
• No. of saved msgs. - Define how many sent messages will be saved to the Sent items
folder at a time. The default limit is 20 messages. When the limit is reached, the oldest
message is deleted.
• Memory in use - Define the memory store. Choices are phone’s memory or memory
card, if one is used.
66
Copyright © 2004 Nokia. All rights reserved.
Tools
6. Tools
Settings
Changing general settings
1 Scroll to a setting group and press
to open it.
2 Scroll to a setting you want to change and press
to:
• switch between options if there are only two (On/Off),
• open a list of options or an editor,
• open a slider view and press
or
to increase or decrease the value
respectively.
Go to Menu →
Settings.
See Fig. 13‚ on page 68. You may be able to receive some settings from your service
provider in a short message. See “Receiving smart messages” on page 56.
Phone settings
General
• Phone language - You can change the language for the display texts in your phone.
This change may also affect the format used for date and time and the separators
used, for example, in calculations. If you select Automatic, the phone selects the
language according to the information on your SIM card. After you have changed the
display text language, you must restart the phone.
Copyright © 2004 Nokia. All rights reserved.
67
Tools
Changing the settings for Phone language or Writing language affects every application in
your phone and the change remains effective until you change these settings again.
• Writing language - You can change the writing language of your phone. Changing the
language affects:
• the characters available when you press any key (
)
• the predictive text dictionary used
• the special characters that are available when you press the
and
keys.
• Dictionary - To set predictive text input On or Off for all editors in the phone. Select a
language for entering predictive text from the list available. You can also change this
setting when you are in an editor. Press
and select Dictionary → Dictionary on or
Off.
• Welcome note or logo - The welcome note or logo is displayed briefly each time you
switch on the phone. Select Default if you want to use the default image or animation.
Select Text to write a welcome note (max. 50 letters). Select Image to select a photo
or picture from the Gallery.
• Orig. phone settings - You can reset some of the settings to their original values. To do
this, you need the lock code. See “Security” on page 76. After resetting the settings,
the phone may take a longer time to power on. All documents and files that you have
created are left as they are.
Fig. 13 The Settings main
view.
68
Standby mode
• Left selection key and Right selection key - You can change the shortcuts that appear
over the left
and right
selection keys in standby mode. In addition to the
applications, you can have the shortcut point to a function, for example, New message.
• Navigation key right, Navigation key left, Navigation key down, Navigation key up, and
Selection key - To have shortcuts available in standby mode when you press the scroll
key in any direction, scroll to the desired application or function and press the scroll
key.
Copyright © 2004 Nokia. All rights reserved.
Tools
Display
• Screen saver timeout - The screen saver is activated when the screen saver time-out
period is over. When the screen saver is active, the display is cleared and you can see
the screen saver bar.
• To deactivate the screen saver press any key.
Call settings
Send my caller ID (Network Service)
• This allows you to set your phone number to be displayed (Yes) or hidden (No) from
the person to whom you are calling. Or, the value may be set by your network operator
or service provider when you make a subscription.
Call waiting (Network Service)
• The network will notify you of a new incoming call while you have a call in progress.
Select Activate to request the network to activate call waiting, Cancel to request the
network to deactivate call waiting, or Check status to check if the function is active or
not.
Automatic redial
• When this setting is activated, your phone will make a maximum of ten attempts to
connect the call after an unsuccessful call attempt. Press
to stop automatic
redialling.
Summary after call
• Activate this setting if you want the phone to briefly display the approximate duration
of the last call.
Speed dialling
• Select On and the numbers assigned to the speed dialling keys (
) can be
dialled by pressing and holding the key. See “Assigning speed dialling keys” on
page 28.
Copyright © 2004 Nokia. All rights reserved.
69
Tools
Anykey answer
• Select On, and you can answer an incoming call by briefly pressing any key, except
,
, and
.
Line in use (Network Service)
• This setting is shown only if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making
calls and sending short messages. Calls on both lines can be answered irrespective of
the selected line.
You will not be able to make calls if you select Line 2 and have not subscribed to this
network service.
To prevent line selection, select Line change → Disable if supported by your SIM card. To
change this setting, you need the PIN2 code.
Connection settings
Access points
Here you can see a short explanation for every setting that may be needed for different
data connections and access points. If you have not yet used your phone to make a WAP
connection, you may need to contact your service provider for assistance with the firsttime connection or visit www.nokia.com/phonesettings.
Many service providers will require you to use an IAP for your default access point. Other
service providers allow you to use a WAP access point. Contact your service provider for
more information.
70
Copyright © 2004 Nokia. All rights reserved.
Tools
Start to fill in the settings from the top because depending on what data connection you
select (Data bearer) only certain setting fields are available.
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are GPRS or Data call. Depending on what data connection
you select, only certain setting fields are available. Fill in all fields marked with Must
be defined, or with an asterisk. Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
To be able to use a data connection, the network operator or service provider must
support this feature, and if necessary, activate it for your SIM card.
• Access point name (for packet data only) - The access point name is needed to establish
a connection to the GPRS network. You obtain the access point name from your
network operator or service provider.
• Dial-up number (for Data call only) - The modem telephone number of the access point.
• User name - Write a user name if required by the service provider. The user name may
be needed to make a data connection, and is usually provided by the service provider.
The user name is often case-sensitive.
• Prompt password - If you must key in a new password every time you log onto a server,
or if you do not want to save your password to the phone, choose Yes.
• Password - A password may be needed to make a data connection, and is usually
provided by the service provider. The password is often case-sensitive. When you are
writing the password, the characters you enter are shown briefly and then changed
to asterisks (*). The easiest way to enter numbers is to press and hold the digit you
want to enter, and then continue entering letters.
• Authentication - Normal / Secure.
• Homepage - Depending on what you are setting up, write either:
• the service address, or
• the address of the multimedia messaging centre.
Copyright © 2004 Nokia. All rights reserved.
71
Tools
• Data call type (for Data call only) - Analogue, ISDN v.110, or ISDN v.120 defines whether
the phone uses an analogue or digital connection. This setting depends on both your
GSM network operator and Internet Service Provider (ISP), because some GSM
networks do not support certain types of ISDN connections. For details, contact your
ISP. If ISDN connections are available, they establish connections more quickly than
analogue methods.
• Maximum data speed (for Data call only) - The options are 9600 or 14400, depending
on what you have chosen in Data call type. This option allows you to limit the
maximum connection speed when GSM data is used. Higher data rates may cost more,
depending on the service provider.
The speeds above represent the maximum speed at which your connection will operate.
During the connection, the operating speed may be less, depending on network
conditions.
Options → Advanced settings
• Phone IP address - The IP address of your phone.
• Primary name server - The IP address of the primary DNS server.
• Second. name server - The IP address of the secondary DNS server.
• Proxy serv. address - The IP address of the proxy server.
• Proxy port number - The port number of the proxy server.
If you need to enter these settings, contact your Internet service provider.
The following settings are shown if you have selected data call as the connection type:
• Use callback - This option allows a server to call you back once you have made the
initial call. Contact your service provider to subscribe to this service.
The phone expects the callback call to use the same data call settings that were used
in the callback-requesting call. The network must support that type of call in both
directions, to and from the phone.
• Callback type - The options are Use server no. / Use other no.. Ask your service provider
for the correct setting to use; it will depend on the service provider’s configuration.
72
Copyright © 2004 Nokia. All rights reserved.
Tools
• Callback number - Key in your phone’s data phone number which the dial back server
uses. Usually, this number is the data call phone number of your phone.
• Use PPP compression - When set to Yes, this option speeds up the data transfer, if
supported by the remote PPP server. If you have problems with establishing a
connection, try setting this to No. Contact your service provider for guidance.
• Use login script - The options are Yes / No.
• Login script - Insert the login script.
• Modem initialisation (Modem initialisation string) - Controls your phone using modem
AT commands. If required, enter characters specified by your service provider or
Internet service provider.
GPRS
The GPRS settings affect all access points using a packet data connection.
GPRS connection - If you select When available and you are in a network that supports
packet data, the phone registers to the GPRS network and sending short messages will
be done via GPRS. Also, starting an active packet data connection, for example, to send
and receive e-mail, is quicker. If you select When needed, the phone will use a packet data
connection only if you start an application or action that needs it. The GPRS connection
can be closed after it is not used by any application.
Go to Settings →
Connection → GPRS.
If there is no GPRS coverage and you have chosen When available, the phone will
periodically try to establish a packet data connection.
Access point - The access point name is needed when you want to use your phone as a
packet data modem to your computer.
Data call
The Data call settings affect all access points using a GSM data call.
Online time - If there are no actions the data call is dropped automatically after a timeout period. The options are User defined, in which case you enter a time, or Unlimited.
Copyright © 2004 Nokia. All rights reserved.
Go to Settings →
Connection → Data call.
73
Tools
Date and time
The Date and time settings allow you to define the date and time used in your phone, as
well as change the date and time format and separators.
• Clock type → Analogue or Digital - To change the clock shown in standby mode. See
“Clock” on page 96.
• Auto time update - To allow the network to update time, date, and time zone
information to your phone (Network Service). For the Auto time update setting to take
effect, the phone needs to be restarted. Check any alarms as these may be affected
by Auto time update.
• Clock alarm tone - To change the tone played when the clock alarm time is reached.
• GMT offset - To change the time zone for the clock time.
• Daylight-saving - To set daylight saving time on or off.
Call barring (Network Service)
Call barring allows you to restrict the making and receiving of calls with your phone. For
this function, you need the barring password, which you can obtain from your service
provider.
1 Scroll to one of the barring options.
2 Select Options → Activate to request the network to set call restriction on, Cancel to
set the selected call restriction off, or Check status to check if the calls are barred or
not.
• Select Options → Edit barrings passw. to change the barring password.
• Select Options → Cancel all barrings to cancel all active call barrings.
When calls are barred, calls still may be possible to certain official emergency numbers.
74
Copyright © 2004 Nokia. All rights reserved.
Operator selection
• Choose Automatic to set the phone to automatically search for and select one of the
cellular networks available in your area.
• Choose Manual, if you want to select the desired network manually from a list of
networks. If the connection to the manually selected network is lost, the phone will
sound an error tone and ask you to select a network again. The selected network must
have a roaming agreement with your home network, that is, the operator whose SIM
card is in your phone.
Tools
Network
Cell info display
• Select On to set the phone to indicate when it is used in a cellular network based on
Micro Cellular Network (MCN) technology and to activate cell info reception
(Network Service).
Enhancement settings
Scroll to an enhancement folder and open the settings:
• Select Default profile to select the profile you want to activate each time you connect
a certain enhancement to your phone. See “Changing the profile” on page 84.
• Select Automatic answer to set the phone to answer an incoming call automatically
after five seconds time when you connect a certain enhancement to your phone. If
the Ringing type is set to Beep once or Silent, automatic answer cannot be used, and
you must answer the phone manually.
Copyright © 2004 Nokia. All rights reserved.
75
Tools
Security
Phone and SIM
Explanations for the different security codes that may be needed:
• PIN code (4 to 8 digits) - The PIN (Personal Identification Number) code protects
your SIM card against unauthorised use. The PIN code is usually supplied with the SIM
card.
After three consecutive incorrect PIN code entries, the PIN code is blocked. If the PIN
code is blocked, you need to unblock the PIN code before you can use the SIM card
again. See the information about the PUK code.
• PIN2 code (4 to 8 digits) - The PIN2 code, supplied with some SIM cards, is required
to access some functions.
• Lock code (5 digits) - The lock code can be used to lock the phone and keypad to
avoid unauthorised use.
The factory setting for the lock code is 12345. To avoid unauthorised use of your
phone, change the lock code. Keep the new code secret and in a safe place separate
from your phone.
• PUK and PUK2 codes (8 digits) - The PUK (Personal Unblocking Key) code is required
to change a blocked PIN code. The PUK2 code is required to change a blocked PIN2
code. If the codes are not supplied with the SIM card, contact the operator whose SIM
card is in your phone for the codes.
You can change the following codes: lock code, PIN code, and PIN2 code. These codes can
only include the numbers from 0 to 9.
Avoid using access codes similar to emergency numbers, such as 112, to prevent
accidental dialling of the emergency number.
76
Copyright © 2004 Nokia. All rights reserved.
Tools
PIN code request - When the PIN code request is active, the code is requested each time
the phone is switched on. Note that deactivating the PIN code request may not be
allowed by some SIM cards.
PIN code / PIN2 code / Lock code - Open this setting if you want to change the code.
Autolock period - You can set an autolock period, a time-out after which the phone is
automatically locked and can be used only if the correct lock code is entered. Key in a
number for the time-out in minutes or select None to turn off the autolock period.
• To unlock the phone, key in the lock code.
When the device is locked, calls still may be possible to the official emergency number
programmed into your device.
Lock if SIM changed - Select Yes if you want the phone to prompt for the lock code when
an unknown, new SIM card is inserted into your phone. The phone maintains a list of SIM
cards that are recognised as the owner’s cards.
Fixed dialling - You can restrict your outgoing calls to selected phone numbers, if
supported by your SIM card. You need the PIN2 code for this function. When this function
is active, you can only call those phone numbers that are included in the fixed dialling
list or which begin with the same digit(s) as a phone number on the list.
• Press
to set Fixed dialling on.
When fixed dialling is activated, calls still may be possible to the official emergency
number programmed into your device.
• To add new numbers to the Fixed dialling list, select Options → New contact or Add
from Contacts.
Options in the
Fixed dialling view: Open,
Call, Activ. fixed dialling /
Deact. fixed dialling, New
contact, Edit, Delete, Add to
Contacts, Add from
Contacts, Find, Mark/
Unmark, Help, and Exit.
Closed user group (Network Service) - You can specify a group of people to whom you can
call and who can call you. For more information, contact your network operator or service
provider. Select: Default to activate the default group agreed on with the network
operator, On if you want to use another group (you need to know the group index
number), or Off.
Copyright © 2004 Nokia. All rights reserved.
77
Tools
When calls are limited to closed user groups, calls still may be possible to the official
emergency number programmed into your device.
Confirm SIM services (Network Service) - To set the phone to display confirmation
messages when you are using a SIM card service.
Certif. management
Options in the
certificate management
main view: Certificate
details, Delete, Trust
settings, Mark/Unmark,
Help, and Exit.
In the Certificate management main view, you can see a list of authority certificates that
have been stored in your phone. Press
to see a list of personal certificates, if
available.
Authority certificates are used by some browser services, such as banking services, for
checking signatures or server certificates or other authority certificates.
Server certificates are used to improve security in the connection between the phone and
the gateway. The phone receives the server certificate from the service provider before
the connection is established and its validity is checked using the authority certificates
saved in the phone. Server certificates are not saved.
Server certificates may be needed when you, for example:
• want to connect to an online bank or another site or remote server for actions that
involve transferring confidential information, or
• want to decrease the risk of viruses or other malicious software and be sure of the
authenticity of software when downloading and installing software.
Important: Note that even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller, they must
be used correctly in order to benefit from increased security. The existence of a
certificate does not offer any protection by itself; the certificate manager must
contain correct, authentic, or trusted certificates for increased security to be
available. Certificates have a restricted lifetime. If Expired certificate or Certificate
not valid yet is shown even if the certificate should be valid, check that the
current date and time in your device are correct.
78
Copyright © 2004 Nokia. All rights reserved.
Tools
Before changing any certificate settings, you must make sure that you really trust the
owner of the certificate and that the certificate really belongs to the listed owner.
Changing the trust settings of an authority certificate
• Scroll to an authority certificate and select Options → Trust settings. Depending on
the certificate, a list of the applications that can use the selected certificate is shown.
For example:
Application manager / Yes - The certificate is able to certify the origin of new software.
Internet / Yes - The certificate is able to certify e-mail and imaging servers.
Device manager
Device manager allows a third party, such as your service provider, to assist you directly
with phone settings. To allow device management, your phone must establish a
connection and synchronize with the third party’s server. You can start the
synchronization session from your phone, and you can accept or reject server-initiated
synchronization attempts.
Go to Menu → Tools
→ Device manager
This feature is operator dependent and may not be available on all phones. Contact your
service provider for information and availability.
Options in the
Device manager main
view: Start configuration,
New server profile, Edit
profile, Delete, Enable
config. /Disable config., View
log, Help, and Exit.
A device manager profile must be defined before you can connect to a server. The third
party who is assisting you can help define the profile settings:
Server name — Display name of the server.
Server ID — Remote device manager server ID.
Server password — Password used in server alerts. Enter the password that must be
provided by the device manager server when synchronizing with your phone.
Access point — Internet access point your phone uses to establish the server connection.
Choose from the list of access points defined in your phone.
Copyright © 2004 Nokia. All rights reserved.
79
Tools
Host address — Device management server URL.
Port — Device management server port.
User name — Your user name for this profile.
Server password — Your password for this profile.
Server [30] will start configuration. Continue? — Device management allowed on this server.
Select Yes or No.
Auto-accept all reqs. — Automatic or approved device management on this server. Select
Yes to allow synchronization without your verification, or select No to verify each
synchronization attempt.
File manager
Go to Menu → Tools
→ File manager
In File manager you can browse, open, and manage files and folders in the phone memory
or on the memory card, if you use one.
Options in the File
manager main view: Open,
Send, Delete, Move to folder,
Copy to folder, New folder,
Mark/Unmark, Rename,
Find, View details, Memory
details, Help, and Exit.
Open File manager to see a list of the folders in the phone memory. Press
folders on the memory card, if you use one.
to see the
You can browse, open, and create folders, mark, copy and move items to folders. See
“Actions common to all applications” on page 14.
Viewing memory consumption
If you have a memory card installed on your phone, you will have a choice of two memory
views, one for the phone memory and one for the memory card.
Press
or
to move from one memory tab to another.
• To check memory consumption of the current memory select Options → Memory
details.
80
Copyright © 2004 Nokia. All rights reserved.
Tools
The phone calculates the approximate amount of free memory for storing data and
installing new applications.
In the memory views, you can view the memory consumption of the different data
groups: Calendar, Contacts, Documents, Messages, Images, Sound files, Video clips,
Applications, Mem. in use, and Free memory.
If the phone memory is getting low, remove some files, or move them to the memory card.
See “Troubleshooting” on page 128.
Voice commands
You can use Voice commands to start applications and profiles, and to dial numbers from
Contacts, without having to look at your phone’s display. You record a word, or words,
(voice command) and then pronounce this voice command to open an application,
activate a profile, or dial a number.
Go to Menu → Tools
→ Voice commands.
You can have only one voice command per item.
Any spoken word(s) can be a voice command.
• When recording, hold the phone at a short distance away from your mouth. After the
starting tone, clearly pronounce the word, or words, you want to record as a voice
command.
Before using voice tags, note that:
• Voice tags are not language-dependent. They are dependent on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them in a
quiet environment.
Copyright © 2004 Nokia. All rights reserved.
Options in the
Voice commands main
view: Add voice command,
Open, New application,
Playback, Change, Delete,
Delete all, Help, and Exit.
81
Tools
• Very short names are not accepted. Use long names and avoid similar names for
different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
Adding a voice command to an application
1 In the Voice commands main view, scroll to the application that you want to add a
voice command to, and select Options → Add voice command.
To add a voice command to a profile, the Profiles folder must be opened and a specific
profile selected.
2 The text Press 'Start', then speak after tone is displayed.
• Press Start to record a voice command. The phone sounds a starting tone and the
note Speak now is displayed.
3 Pronounce the voice command. The phone will stop recording after approximately 5
seconds.
4 After recording, the phone plays the recorded command and the note Playing voice tag
is displayed. If you do not want to save the recording, press Quit.
5 When the voice command has been successfully saved, the note Voice tag saved is
displayed and a beep sounds. A symbol
can be seen next to the application.
Adding an application to the list
Assign voice commands to other applications that are not listed in the Voice commands
main view.
1 In the Voice commands main view, select Options → New application.
2 Available applications are displayed. Scroll to the application that you want to add
and press Select.
3 Add a voice command to the new application. See “Adding a voice command to an
application” on page 82.
82
Copyright © 2004 Nokia. All rights reserved.
1 In standby mode, press and hold
. A short tone is played and the note Speak now
is displayed.
2 When you are starting an application by saying a voice command, hold the phone at
a short distance away from your mouth and pronounce the voice command clearly.
3 The phone plays the original voice command and starts the application. If the phone
plays the wrong voice command, press Retry.
Tools
Starting an application using a voice command
Replaying, erasing, or changing a voice command
To replay, erase, or change a voice command, scroll to the item that has a voice command
(indicated by ), select Options, and then either:
• Playback - To listen to the voice command again.
• Delete - To erase the voice command.
• Change - To record a new voice command. Press Start to record.
Copyright © 2004 Nokia. All rights reserved.
83
Personalising your phone
7. Personalising your
phone
Profiles
Go to Menu →
Profiles.
In Profiles, you can adjust and customise the phone tones for different events,
environments, or caller groups. You can see the currently selected profile at the top of
the display in standby mode. If the General profile is in use, only the current date is
shown.
Options in the
Profiles main view:
Activate, Personalise,
Create new, Delete profile,
Tone downloads, Help, and
Exit.
Changing the profile
1 Go to Menu → Profiles. A list of profiles opens.
2 In the Profiles list, scroll to a profile and select Options → Activate.
Shortcut! To change the profile, press
in standby mode, scroll to the profile
you want to activate and press OK.
Customising profiles
1 To modify a profile, scroll to the profile in the Profiles list and select Options →
Personalise. To create a new profile, select Options → Create new. A list of profile
settings opens.
2 Scroll to the setting you want to change and press
to open the choices:
84
Copyright © 2004 Nokia. All rights reserved.
Copyright © 2004 Nokia. All rights reserved.
Tip! When you
scroll through the list, you
can stop on a tone to
listen to it before you
make your selection.
Personalising your phone
• Ringing tone - To set the ringing tone for voice calls, choose a ringing tone from the
list. Press any key to stop the sound. If a memory card is used, tones stored on it have
the
icon next to the tone name. Ringing tones use shared memory. See “Shared
memory” on page 16. You can also change ringing tones in Contacts. See “Adding a
ringing tone for a contact card or group” on page 26.
• Ringing type - When Ascending is selected, the ringing volume starts from level one and
increases level by level to the set volume level.
• Ringing volume - To set the volume level for the ringing and message alert tones.
• Message alert tone - To set the tone for messages.
• Chat alert tone - To set the tone for instant messages.
• Vibrating alert - To set the phone to vibrate at incoming voice calls and messages.
• Keypad tones - To set the volume level for keypad tones.
• Warning tones - The phone sounds a warning tone, for example, when the battery is
running low of power.
• Alert for - To set the phone to ring only upon calls from phone numbers that belong
to a selected contact group. Phone calls coming from people outside the selected
group will have a silent alert. The choices are All calls / (list of contact groups, if you
have created them). See “Creating contact groups” on page 29.
• Availability - Select Available, Busy, or Not available. See “Presence settings” on page 33.
• Private message - Key in a message to display your current presence status. See
“Presence settings” on page 33.
• Profile name - You can rename a profile and give it any name you want. The General
profile cannot be renamed.
85
Personalising your phone
Themes
Go to Menu →
Themes.
You can change the look of your phone’s display by activating a theme. A theme can
include the idle screen wallpaper, colour palette, screen saver, and background image in
’Go to’. Edit a theme for more detailed personalisation.
Options in the
Themes main view:
Preview, Apply, Edit,
Theme downloads, Help,
and Exit.
When you open Themes you will see a list of the available themes. The currently active
theme is indicated by a check mark. Press
to see the themes on the memory card, if
you use one.
• To preview a theme, scroll to the theme and select Options → Preview to view the
theme. Press
to activate the theme. You can activate the theme without
previewing it by selecting Options → Apply from the main view.
Tip! You can copy themes that you have downloaded. To copy a theme from your
memory card to the phone memory, scroll to the theme and select Options →
Copy to phone mem.. To copy a theme from your phone memory to the memory
card, scroll to the theme and select Options → Copy to mem. card.
Editing themes
Group together elements from other themes, or images from the Gallery to personalise
themes further.
1 Scroll to a theme, select Options → Edit, and select:
• Wallpaper - To select an image from one of the available themes, or select your own
image from the Gallery, to use as a background image in standby mode.
86
Copyright © 2004 Nokia. All rights reserved.
Restoring themes
To restore the currently selected theme back to its original settings, select Options →
Restore orig. theme when editing a theme.
Fig. 14 The Themes main
view.
Personalising your phone
• Colour palette - To change the colour palette used on the display.
• Screen saver - To select what is shown on the screen saver bar: the time and date
or a text you have written yourself. The location and background colour of the
screen saver bar changes in one minute intervals. Also, the screen saver changes to
indicate the number of new messages or missed calls. You can set the time that
elapses before the screen saver is activated. See “Phone settings” on page 67.
• Image in 'Go to' - To select an image from one of the available themes, or select your
own image from the Gallery, to use as a background image in Go to.
2 Scroll to the element to be edited and select Options → Change.
3 Select Options → Set to select the current setting. You can also preview the selected
element by selecting Options → Preview. Note that you cannot preview all elements.
Go to
Use Go to for storing shortcuts, links to your favourite photos, video clips, notes, Recorder
sound files, browser bookmarks, and saved browser pages.
The default shortcuts:
- opens the Notes editor,
current date, and
- opens the Messaging Inbox.
- opens the Calendar to the
Copyright © 2004 Nokia. All rights reserved.
Press Go to in standby
mode or go to Menu →
Extras → Go to.
87
Personalising your phone
88
Options in the Go
to main view: Open, Edit
shortcut name, Move, List
view / Grid view, Help, and
Exit.
Adding shortcuts
Shortcuts can be added only from pre-installed applications and functions. Not all
applications have this functionality.
1 Open the application and scroll to the item that you want to add as a shortcut.
2 Select Options → Add to 'Go to' and press OK.
Shortcut! A shortcut in Go to is automatically updated if you move the item it is
pointing to, for example, from one folder to another.
Using shortcuts:
• To open a shortcut, scroll to the icon and press
. The file is opened in the
corresponding application.
• To delete a shortcut, scroll to the shortcut you want to remove and select Options
→ Delete shortcut. Removing a shortcut does not affect the file it is referring to. The
default shortcuts can not be deleted.
• To change the shortcut name, select Options → Edit shortcut name. Write the new
name. This change affects only the shortcut, not the file or item the shortcut refers to.
Copyright © 2004 Nokia. All rights reserved.
Extras
8. Extras
Wallet
Wallet provides you with a storage area for your personal information, such as credit and
debit card numbers, addresses and other useful data, for example, user names and
passwords.
Go to Menu → Extras
→ Wallet.
The information stored in the wallet can be easily retrieved while browsing to
automatically fill in online forms on browser pages, for example, when the service asks
for credit card details. Data in the wallet is encrypted and protected with a wallet code
that you define.
Options in the
wallet main view: Open,
Settings, Help, and Exit.
You can group wallet data into profiles that can be accessed, for example, for making
purchases online.
Due to the nature of the wallet, it will automatically close after 5 minutes. Enter the
wallet code to regain access to the contents. You can change this automatic time-out
period, if required. See “Wallet settings” on page 92.
Entering the wallet code
Each time you open the wallet you will be prompted for a wallet code.
When you open the wallet for the first time, you must create your own access code:
1 Enter a code of your choice (4 - 10 alphanumeric characters), and press OK.
2 You will be prompted to verify the code. Enter the same code and press OK. Do not
give your wallet code to anyone else.
Copyright © 2004 Nokia. All rights reserved.
89
Extras
Enter the code that you have created and press OK.
If you enter the wallet code incorrectly on three consecutive occasions, the wallet
application is blocked for five minutes. The block time increases if further incorrect wallet
codes are entered.
If you forget your wallet code, you will have to reset the code, and you will lose all
information stored in the wallet. See “Resetting the wallet and wallet code” on page 93.
Storing personal card details
Fig. 15 The wallet main
view.
1 Select the Cards category from the main wallet menu and press
.
2 Select a type of card from the list and press
.
• Payment cards - Credit and debit cards.
• Loyalty cards - Membership and store cards.
• Online acc. cards - Personal user names and passwords to online services.
• Address cards - Basic contact details for home/office.
• User info cards - Customised personal preferences for online services.
3 Select Options → New card. An empty form opens.
4 Fill in the fields and press Done.
You can also receive card information directly to the phone from a card issuer or service
provider (if they offer this service). You will be notified which category the card belongs
to. Either save or discard the card. You can view and rename a saved card, but you cannot
edit it.
You can open, edit or delete the fields in the card. Any changes will be saved upon exiting.
90
Copyright © 2004 Nokia. All rights reserved.
Personal notes are a means of storing sensitive information, for example, a bank account
number. You can access the data in a personal note from the browser. You can also send
a note as a message.
• Select the Personal notes category from the main wallet menu and press
.
• Select Options → New card. An empty note opens.
• Press
to start writing. Press
to clear characters. Press Done
to save.
Options when
viewing or editing card
details: Delete, Help, and
Exit.
Extras
Creating personal notes
Creating a wallet profile
Once you have stored your personal details, you can combine them together into a wallet
profile. Use a wallet profile to retrieve wallet data from different cards and categories to
the browser.
1 Select the Wallet profiles category from the main wallet menu and press
.
2 Select Options → New card. A new wallet profile form opens.
3 Fill in the fields as indicated below and press Done.
Some of the fields must contain data selected from the wallet. You must save the data
under the relevant category before creating a wallet profile, or the profile cannot be
created.
• Profile name - Choose and enter a name for the profile.
• Payment card - Select a card from the Payment card category.
• Loyalty card - Select a card from the Loyalty card category.
• Online access card - Select a card from the Online acc. card category.
• Shipping address - Select an address from the Address card category.
• Billing address - By default this is the same as the Shipping address. If you require
a different address, select one from the Address card category.
• User info card - Select a card from the User info card category.
• Receive e-receipt - Select a destination from the Address card category.
Copyright © 2004 Nokia. All rights reserved.
91
Extras
• Deliver e-receipt - Select To phone, To e-mail, or To pho. & e-mail.
• RFID sending - Set to On or Off. Defines whether, or not, your unique phone
identification is sent with the wallet profile (for future development dependent on
RFID-based ticketing).
Retrieving information from the wallet to your browser
When using online mobile services supporting the wallet functionality, you can upload
the data stored in your wallet to automatically enter your details into an online form. For
example, by uploading your payment card details you do not need to key in the card
number and expiry date each time you need them (depending on the content being
browsed). Also, you can retrieve your user name and password stored as an access card
when connecting to a mobile service that requires authentication. See “Purchasing an
item” on page 113.
Viewing ticket details
Options in the
Tickets main view: View,
Delete, Rename, Mark/
Unmark, Help, and Exit.
You can receive notifications of tickets purchased online via the browser. Received
notifications are stored in the wallet. To view the notifications:
1 Select the Tickets category from the main wallet menu and press
.
2 Select Options → View.
Wallet settings
Select Options → Settings from the main wallet menu:
• Wallet code - Change your wallet code. You will be prompted to enter the current
code, create a new code, and verify the new code.
• RFID - Set the phone ID code, type, and sending options (for future development
dependent on RFID-based ticketing).
92
Copyright © 2004 Nokia. All rights reserved.
Extras
• Automatic close - Change the automatic time-out period (1 - 60 minutes). After the
time-out period has elapsed, the wallet code must be re-entered to gain access to the
contents.
Resetting the wallet and wallet code
To reset both the contents of the wallet and the wallet code:
1 Key in *#7370925538# in standby mode.
2 Enter the phone’s lock code, and press OK. See “Security” on page 76.
3 You will be asked to confirm the erasing of data. Press OK.
When opening the wallet again, you must enter a new wallet code. See “Entering the
wallet code” on page 89.
Calculator
1 Enter the first number of your calculation. If you make a mistake, press
to erase
it.
2 Scroll to an arithmetic function and press
to select it.
3 Enter the second number.
4 To execute the calculation, scroll to
and press
.
Note: This calculator has limited accuracy and is designed for simple calculations.
• To add a decimal, press
.
• Press and hold
to clear the result of the previous calculation.
• Use
and
to view previous calculations and move in the sheet.
Copyright © 2004 Nokia. All rights reserved.
Go to Menu → Extras
→ Calculator.
Options in
Calculator: Last result,
Memory, Clear screen, Help,
and Exit.
93
Extras
Converter
In Converter, you can convert measures such as Length from one unit to another, for
example, Yards to Metres.
Go to Menu → Extras
→ Converter.
The Converter has limited accuracy and rounding errors may occur.
Options in
Converter: Conversion type,
Currency rates (not
applicable to other units),
Help, and Exit.
To make currency conversion you must first set the exchange rate. See “Setting a base
currency and exchange rates” on page 95.
1 Scroll to the Type field and press
to open a list of measures. Scroll to the measure
you want to use and press OK.
2 Scroll to the first Unit field and press
to open a list of available units. Select the
unit from which you want to convert and press OK.
3 Scroll to the next Unit field and select the unit to which you want to convert.
4 Scroll to the first Amount field and key in the value you want to convert. The other
Amount field changes automatically to show the converted value.
Converting units
Press
to add a decimal and press
(exponent) symbols.
for the +, - (for temperature), and E
The conversion order changes if you write a value in the second Amount field. The result
is shown in the first Amount field.
94
Copyright © 2004 Nokia. All rights reserved.
Extras
Setting a base currency and exchange rates
Before you can make currency conversions, you need to choose a base currency (usually
your domestic currency) and add exchange rates.
The rate of the base currency is always 1. The base currency determines the conversion
rates of the other currencies.
1 Select Currency as the measure type and select Options → Currency rates. A list of
currencies opens and you can see the current base currency at the top.
2 To change the base currency, scroll to the currency (usually your domestic currency),
and select Options → Set as base curr..
Tip: When you change the base currency, all previously set exchange rates are
set to 0 and you need to key in new rates.
3 Add exchange rates, scroll to the currency, and key in a new rate, that is, how many
units of the currency equal one unit of the base currency you have selected.
4 After you have inserted all the required exchange rates, you can make currency
conversions. See “Converting units” on page 94.
Notes
You can link notes to Go to and send them to other devices. Plain text files (TXT format)
you receive can be saved to Notes.
• Press
to start to write. Press
to clear letters. Press Done to
save.
Copyright © 2004 Nokia. All rights reserved.
Go to Menu → Extras
→ Notes.
95
Extras
Clock
Go to Menu → Extras
→ Clock.
Changing clock settings
Options in Clock:
Set alarm, Reset alarm,
Remove alarm, Settings,
Help, and Exit.
• To change the time or date, select Options → Settings in Clock.
Setting an alarm
1 To set a new alarm, select Options → Set alarm.
2 Enter the alarm time and press OK. When the alarm is active, the
indicator is
shown.
• To cancel an alarm, go to clock and select Options → Remove alarm.
Turning off the alarm
• Press Stop to turn off the alarm.
• Press Snooze to stop the alarm for five minutes, after which it will resume. You can
do this a maximum of five times.
If the alarm time is reached while the phone is switched off, the phone switches itself on
and starts sounding the alarm tone. If you press Stop, the phone asks whether you want
to activate the phone for calls. Press No to switch off the phone or Yes to make and
receive calls. Do not press Yes when wireless phone use is prohibited or when it may
cause interference or danger.
96
Copyright © 2004 Nokia. All rights reserved.
Extras
Personalising the alarm tone
1 To personalise the alarm tone, select Options → Settings.
2 Scroll to Clock alarm tone and press
.
3 When you scroll through the list of tones, you can stop on a tone to listen to it before
you make your selection. Press Select to select the current tone.
Recorder
The voice recorder allows you to record telephone conversations and voice memos. If you
are recording a telephone conversation, both parties will hear a tone every five seconds
during recording.
Go to Menu → Extras
→ Recorder.
Recorded files are stored in the Gallery. See “Gallery” on page 44.
• Select Options → Record sound clip and scroll to a function and press
to select it.
Use:
- to record,
- to pause,
- to stop,
- to fast forward,
- to fast rewind, or
- to play an opened sound file.
Recorder cannot be used when a data call or a GPRS connection is active.
Copyright © 2004 Nokia. All rights reserved.
Options in
Recorder: Record sound clip,
Delete, Rename sound clip,
Send, Go to Gallery, Settings,
Add to 'Go to', Help, and
Exit.
97
Extras
Chat (Network Service)
Go to Menu → Extras
→ Chat.
Chat allows you to converse with other people using instant messages, and join
discussion forums (chat groups) with specific topics. Once you have registered with a
chat service, you can log into the service provider’s chat server. See Fig. 16‚ on page 98.
Check the availability of chat services, pricing, and tariffs with your network operator
and/or service provider. Service providers will also give you instructions on how to use
their services.
Fig. 16 The Chat main
view.
Options in the Chat
main view: Open, Login,
Logout, Settings, Help, and
Exit.
98
Before using Chat
To access a chat service you need to save the settings for that service. You may receive
the settings from the network operator or service provider that offers the service. See
“Receiving smart messages” on page 56.You can also key in the settings manually. See
“Chat and Presence servers” on page 104.
Copyright © 2004 Nokia. All rights reserved.
Extras
Connecting to a chat server
1 Go to Menu → Extras → Chat to connect to a chat server. You can change the chat
server to connect to. See “Chat and Presence servers” on page 104.
2 Once the connection has been established, key in your user ID and password and press
, or press Cancel to stay offline. When you are offline, your phone is not connected
to the chat server and you cannot send or receive messages. To log in later, select
Options → Login.
You obtain the user ID and password from your service provider.
To log out, select Options → Logout.
Modifying your chat settings
Select Options → Settings → Chat settings.
• Use screen name - Select Yes to key in a nickname (max. 10 characters).
• Chat presence - To prevent others from seeing if you are online, select Not active.
• Allow messages from - Select All, From Chat contacts or None.
• Allow invitations from - Select All, From Chat contacts or None.
• Message speed - Select the speed at which new messages are displayed.
• Availability reloading - To choose how to update information about whether your chat
contacts are online or offline. Select Automatic or Manual.
• Reload availab. for - Select All contacts or Selected contacts.
Copyright © 2004 Nokia. All rights reserved.
Fig. 17 The Chat groups
view.
99
Extras
Joining and leaving a chat group
Options in the Chat
groups view: Open, Join
group, Create new group,
Leave Chat group, Chat
group, Search, Settings,
Help, and Exit.
Go to the Chat groups view. A list of chat groups that you have saved or are currently
joined to is shown. See Fig. 17‚ on page 99. The icon next to a group indicates what type
it is:
•
- A group that you have created and are currently joined to.
•
- A group that you have created but are not currently joined to.
•
- A group that you have saved and are currently joined to.
•
- A group that you have saved but are not currently joined to.
•
- A group that you are currently joined to but have not saved.
To join a chat group: Scroll to a group on the list and press
. To join a chat group
not on the list but for which you know the group ID, select Options → Join group. Key in
the group ID and press
.
You can scroll to a group, press Options → Chat group and then select: Save group, Delete,
View members to see who are currently joined to the group, Chat group details to see the
group ID, topic, members, editing rights in the group, and whether sending private
messages is allowed in the group, and Chat group settings to view and edit the chat group’s
settings. See “Editing chat group settings” on page 103.
To leave the chat group: Select Options → Leave Chat group.
100
Copyright © 2004 Nokia. All rights reserved.
Extras
Searching for chat groups and users
Go to the Chat groups view and select Options → Search → Groups or Users.
• You can search for Groups by Group name, Topic, and Members (user ID). For groups
that you have found you can select New search, Join and Save group.
• You can search for Users by User's name, User ID, Phone number, and E-mail address. For
users that you have found you can select New search, Open conversation, Add to Chat
contact to save the contact, Send invitation, and Add to blocked list to block (or unblock)
messages from the contact.
When the search result is displayed, you can select Options → New search, More results
from the same search, and Previous results to see your previous search result.
Chatting in a chat group
Once you have joined a chat group, you can view the messages that are exchanged in the
group, and send your own messages.
• To send a message, write the message and press
.
• To send a private message to a member (if allowed in the group), select Options →
Send private msg., select the recipient, write the message, and press
.
To reply to a private message sent to you, select Options → Reply.
To invite chat contacts who are online to join the chat group (if allowed in the group),
select Options → Send invitation, select the contacts you want to invite, write the
invitation message, and press Done.
Options while
chatting: Send, Send
private msg., Reply, Send
invitation, Leave Chat group,
Save group, Record convers./
Stop recording, Help, and
Exit.
Recording messages
To record the messages that are exchanged in a chat group or during an individual
conversation, select Options → Record convers.. Key in the name for the message file and
press
. To stop recording, select Options → Stop recording.
The recorded message files are saved to Notes. See “Notes” on page 95.
Copyright © 2004 Nokia. All rights reserved.
101
Extras
Blocking messages
To prevent receiving messages from certain chat users, select Options → Blocking options
and then select:
• Add to blocked list - To block messages from the currently selected user.
• Add ID to list manually - Key in the user ID of the user and press
.
• View blocked list - To see the users whose messages are blocked.
• Unblock - Select the user that you want to remove from the blocked list and press
.
Starting and viewing individual conversations
Go to the Conversations view for a list of the chat users with whom you have an ongoing
conversation. See Fig. 18‚ on page 102.
Fig. 18 The Conversations
view.
To start a new conversation, select Options → New conversation and then select:
Options in the
Conversations view: Send,
Add to Chat contact,
Forward, Record convers./
Stop recording, Blocking
options, End conversation,
Help, and Exit.
• Select recipient - To see a list of your saved chat contacts that are currently online.
Scroll to the contact and press
.
• Enter user ID - Key in the user ID and press
. The user ID is provided by the service
provider to those who register to the service.
To view an ongoing conversation, scroll to the user and press
. To continue the
conversation, write your message and press
. To return to the conversations list
without closing the conversation, press Back.
To close the conversation, select Options → End conversation.
Icon:
next to a user
indicates that you have
received a new message
from that user.
102
Ongoing conversations are automatically closed when you exit Chat.
To save a user to your chat contacts, scroll to the user and select Options → Add to Chat
contact.
To send automatic replies to incoming messages, select Options → Set auto reply on. Key
in the text and press Done.
Copyright © 2004 Nokia. All rights reserved.
Go to the Chat contacts view to see a list of your saved chat contacts.
is shown next
to contacts that are currently online, and
for contacts that are offline.
Extras
Chat contacts
To create a new contact, select Options → New Chat contact. Fill in the Name and User ID
fields and press Done.
You can scroll to a contact and press
to view contact details. Press Options and
select:
• Edit - To edit the contact’s details.
• Open conversation - To start a new conversation or continue an ongoing conversation
with the contact.
• Switch tracking on - To be notified every time the chat contact goes online or offline.
• Belongs to groups - To see which groups the chat contact has joined.
• Reload user availab. - To update information about whether contacts are online or
offline. This option is not available if you have set the Availability reloading to
Automatic in Chat settings.
Editing chat group settings
You can edit the settings for a chat group if you have created the group or if the creator
of the group has given you editing rights. Go to the Chat groups view, scroll to the
desired group and select Options → Chat group → Chat group settings. See “Creating a
new chat group” on page 103.
Creating a new chat group
Go to the Chat groups view and select Options → Create new group. Key in the settings
for the group:
• Group name, Group topic, and a Welcome note that the participants see when they join
the group.
• Group size - Maximum number of members allowed to join the group.
Copyright © 2004 Nokia. All rights reserved.
103
Extras
Options in the Chat
contacts view: Open, Open
conversation, Switch
tracking on, Belongs to
groups, New Chat contact,
Edit, Delete, Reload user
availab., Blocking options,
Search, Settings, Help, and
Exit.
• Allow search - To define if others can find the chat group by searching.
• Editing rights - Scroll to the chat group members to whom you want to give editing
rights and permission to invite contacts to join the group.
• Group members - See “Restricting access to a chat group” on page 104.
• Banned - Displays a list of banned users.
• Allow private msgs. - To allow or prevent private messaging between members.
• Group ID - Is created automatically and cannot be changed.
Restricting access to a chat group
You can make a chat group closed by creating a Group members list. Only the users on
the list are allowed to join the group. Go to the Chat groups view, scroll to the group and
select Options → Chat group → Chat group settings → Group members → Selected only.
• To add a user to the list, select Add and Chat contact or Enter user ID.
• To remove a user from the list, scroll to the user and select Remove.
• To clear the list and allow all chat users to join the group again select Remove all.
Chat and Presence servers
Select Options → Settings → Server settings. You may receive the settings as a smart
message from the service provider that offers the chat service.
• To change the chat or presence server you wish to connect to, select Default server.
• To change the Presence login type, select Login type and select Automatic, Aut. in home
net., or Manual.
• To change the Chat login type, select Login type and select Automatic or Manual.
• To add a new server, select Options → New server. Key in or select the settings: Server
name and Access point in use to connect to the server, Web address of the chat server,
your User ID and login Password. See “Connection settings” on page 70.
You obtain the user ID and password from your service provider when you register to
the service. If you do not know your user ID or password, contact your service provider.
104
Copyright © 2004 Nokia. All rights reserved.
Extras
Memory card
For details on inserting a memory card into the phone, see the Getting Started guide. You
can use it to store your multimedia files such as video clips and sound files, photos,
messaging data, and to backup information from your phone’s memory.
Included with your Nokia 7610 phone is a Reduced Size MultiMediaCard (RS-MMC) that
may contain add-on applications from independent developers. These applications are
designed by the devlopers to be compatible with your phone.
Go to Menu → Tools
→ Memory card.
Details of how you can use the memory card with other features and applications of your
phone are given in the sections describing these features and applications.
Keep all memory cards out of the reach of small children.
Use only compatible MultiMediaCards (MMC) with this device. Other memory cards, such
as Secure Digital (SD) cards, do not fit in the MMC card slot and are not compatible with
this device. Using an incompatible memory card may damage the memory card as well as
the device, and data stored on the incompatible card may be corrupted.
Format memory card
When a memory card is formatted, all data on the card is permanently lost.
Some memory cards are supplied pre-formatted and others require formatting. When
formatting, the memory card should always be formatted in your Nokia 7610 phone to
ensure correct operation. The memory access and performance cannot be guaranteed
when formatting with another operating system.
• Select Options → Format mem. card.
Options in the
memory card: Backup
phone mem., Restore from
card, Format mem. card,
Memory card name, Set
password, Change
password, Remove
password, Unlock memory
card, Memory details, Help,
and Exit.
Select Yes to confirm. When formatting is complete, key a name for the memory card
(max. 11 letters or numbers).
Copyright © 2004 Nokia. All rights reserved.
105
Extras
Backing up and restoring information
To back up information from your phone’s memory to the memory card, select Options
→ Backup phone mem.. To restore information from the memory card to the phone’s
memory, select Options → Restore from card.
To restore information from the memory card to the phone’s memory, select Options →
Restore from card.
You can only back up the phone memory and restore it to the same phone.
Locking the memory card
To set a password to lock your memory card against unauthorised use, select Options →
Set password.
You will be asked to enter and confirm your password. The password can be up to eight
characters long.
The password is stored in your phone and you don’t have to enter it again while you are
using the memory card on the same phone. If you want to use the memory card on
another phone, you will be asked for the password.
Unlocking a memory card
If you insert another password-protected memory card in your phone, you will be
prompted to enter the password of the card. To unlock the card:
• Select Options → Unlock memory card.
Once the password is removed, the memory card is unlocked and can be used on another
phone without a password.
106
Copyright © 2004 Nokia. All rights reserved.
You can check the memory consumption of different data groups and the available
memory for installing new applications or software on your memory card:
• Select Options → Memory details.
Copyright © 2004 Nokia. All rights reserved.
Extras
Checking memory consumption
107
Services and Applications
9. Services and
Applications
Web (Mobile browser)
Go to Menu → Web
or press and hold
in standby
mode.
Various service providers maintain pages specifically designed for mobile phones, offering
services that can be, for example, news, weather reports, banking, travel information,
entertainment, and games. With the mobile browser you can view these services as WAP
pages written in WML, XHTML pages written in XHTML, or a mixture of both. If you have
not yet used your phone to make a WAP connection, you may need to contact your
service provider for assistance with the first-time connection or visit www.nokia.com/
phonesettings.
A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed is stored in the cache. To
empty the cache, select Options → Navigation options → Clear cache.
Check the availability of services, pricing, and tariffs with your network operator and/or
service provider. Service providers will also give you instructions on how to use their
services.
108
Copyright © 2004 Nokia. All rights reserved.
• Save the settings that are needed to access the browser service that you want to use.
See “Setting up the phone for the browser service” on page 109.
• Make a connection to the service. See “Making a connection” on page 110.
• Start browsing the web pages. See “Browsing” on page 111.
• End the connection to the service. See “Ending a connection” on page 114.
Setting up the phone for the browser service
Receiving settings in a smart message
You may receive service settings in a special text message, a so-called smart message,
from the network operator or service provider that offers the service. See “Receiving
smart messages” on page 56. For more information, contact your network operator or
service provider.
Services and Applications
Basic steps for accessing
Keying in the settings manually
Follow the instructions given to you by your service provider.
1 Go to Settings → Connection → Access points and define the settings for an access
point. See “Connection settings” on page 70.
2 Go to Web → Options → Bookmark manager → Add bookmark. Write a name for the
bookmark and the address of the browser page defined for the current access point.
Copyright © 2004 Nokia. All rights reserved.
109
Services and Applications
Making a connection
Once you have stored all the required connection settings, you can access browser pages.
There are three different ways to access browser pages:
• Select the homepage (
) of your service provider.
• Select a bookmark from the Bookmarks view.
• Press the keys
to start to write the address of a browser service. The Go
to field at the bottom of the display is immediately activated and you can continue
writing the address there.
After you have selected a page or written the address, press
page.
to start to download the
Viewing bookmarks
Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia
does not warrant or endorse these sites. If you choose to access them, you should take
the same precautions, for security or content, as you would with any Internet site.
Options in the
Bookmarks view (when a
bookmark or folder is
selected): Open, Download,
Back to page, Bookmark
manager, Mark/Unmark,
Navigation options,
Advanced options, Send,
Find bookmark, Details,
Settings, Help, and Exit.
In the Bookmarks view, you can see bookmarks pointing to different kinds of browser
pages. Bookmarks are indicated by the following icons:
- The starting page defined for the browser access point. If you use another browser
access point for browsing, the starting page is changed accordingly.
- The last visited page. When the phone is disconnected from the service, the address
of the last visited page is kept in memory until a new page is visited during the next
connection.
When you scroll through bookmarks, you can see the address of the highlighted
bookmark in the Go to field at the bottom of the display.
- A bookmark showing the title.
110
Copyright © 2004 Nokia. All rights reserved.
1 In the Bookmarks view, select Options → Bookmark manager → Add bookmark.
2 Start to fill in the fields. Only the address must be defined. The default access point is
assigned to the bookmark if no other one is selected. Press
to enter special
characters such as /, ., :, and @. Press
to clear characters.
3 Select Options → Save to save the bookmark.
Browsing
On a browser page, new links appear underlined in blue and previously visited links in
purple. Images that act as links have a blue border around them.
Keys and commands used in browsing
• To open a link, press
.
• To scroll the view, use the scroll key.
• To enter letters and numbers in a field, press the keys
. Press
to enter special characters such as /, ., :, and @. Press
to clear characters.
• To go to the previous page while browsing, press Back. If Back is not available, select
Options → Navigation options → History to view a chronological list of the pages you
have visited during a browsing session. The history list is cleared each time a session
is closed.
• To check boxes and make selections, press
.
• To retrieve the latest content from the server, select Options → Navigation options →
Reload.
• To open a sublist of commands or actions for the currently open browser page, select
Options → Service options.
• Press and hold
to disconnect from a browser service and to quit browsing.
Copyright © 2004 Nokia. All rights reserved.
Options when
browsing: Open, Service
options, Bookmarks, Save as
bookmark, View image,
Navigation options,
Advanced options, Send
bookmark, Find, Details,
Settings, Help, and Exit.
Services and Applications
Adding bookmarks manually
111
Services and Applications
112
Saving bookmarks
• To save a bookmark while browsing, select Options → Save as bookmark.
• To save a bookmark received in a smart message, open the message in the Inbox in
Messaging and select Options → Save to bookmarks. See “Receiving smart messages”
on page 56.
Viewing saved pages
Options in the
Saved pages view: Open,
Back to page, Reload, Saved
pages, Mark/Unmark,
Navigation options,
Advanced options, Details,
Settings, Help, and Exit.
If you regularly browse pages containing information which doesn’t change very often,
you can save and then browse them when offline.
• To save a page, while browsing select Options → Advanced options → Save page.
Saved pages are indicated by the following icon:
- The saved browser page.
In the saved pages view you can also create folders to store your saved browser pages.
See Fig. 19‚ on page 113.
Folders are indicated by the following icon:
- Folder containing saved browser pages.
• To open the Saved pages view, press
in the Bookmarks view. In the Saved pages
view, press
to open a saved page.
Copyright © 2004 Nokia. All rights reserved.
The phone stays online after you reload the page.
Downloading
You can download items such as ringing tones, images, operator logos, software, and
video clips through the mobile browser. These items can be provided free or you can
purchase them.
Once downloaded, items are handled by the respective applications on your phone, for
example, a downloaded photo will be saved in the Gallery.
Important: Only install applications from sources that offer adequate protection
against harmful software.
Fig. 19 The Saved pages
view.
Services and Applications
To start a connection to the browser service and to retrieve the page again, select
Options → Navigation options → Reload.
A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed is stored in the cache To
empty the cache, select Options → Navigation options → Clear cache.
Purchasing an item
To download the item:
1 Scroll to the link and select Options → Open.
2 Choose the appropriate option to purchase the item, for example, Buy.
Carefully read all the information provided.
Copyright © 2004 Nokia. All rights reserved.
113
Services and Applications
If the online content is compatible, you can use your wallet information to make the
purchase:
1 Select Open wallet. You will be prompted for your wallet code. See “Entering the wallet
code” on page 89.
2 Select the appropriate card category from your wallet.
3 Select Fill in. This will upload the selected wallet information.
If the wallet does not contain all information necessary for the purchase, you will be
requested to enter the remaining details manually.
Copyright protections may prevent some images, ringing tones, and other content from
being copied, modified, transferred or forwarded.
Checking an item before downloading
You can see details about an item before you download it. Details about an item may
include the price, a brief description and size. See Fig. 20‚ on page 114.
• Scroll to the link and select Options → Open.
Details about the item are displayed on your phone.
• If you want to continue with the downloading, press Accept, or if you want to cancel
the download, press Cancel.
Ending a connection
• Select Options → Advanced options → Disconnect, or
• Press and hold
to quit browsing and to return to standby mode.
Fig. 20 Example of details
in a content file.
114
Copyright © 2004 Nokia. All rights reserved.
Select Options → Settings:
• Default access point - If you want to change the default access point, press
to open
a list of available access points. The current default access point is highlighted. See
“Connection settings” on page 70.
• Show images - Choose if you want to view pictures when you are browsing. If you
choose No, you can later load images during browsing by selecting Options → Show
images.
• Font size - You can choose five text sizes in the browser: Smallest, Small, Normal, Large,
and Largest.
• Default encoding - To make sure your browser pages display text characters correctly,
select the appropriate language type.
• Automatic bookmarks - To turn the automatic completion of addresses in Bookmarks On
or Off. To hide the Auto. Bookmarks folder in Bookmarks, select Hide folder.
• Screen size - To use the whole display area for viewing Web pages, select Full screen.
• Rendering - Select By quality to have good image quality while browsing but at a
slower page download speed, or By speed to download pages faster but have lower
image quality.
• Cookies - Allow /Reject. You can enable or disable the receiving and sending of cookies
(a means of content providers to identify users and their preferences for frequently
used content).
• Security warnings - Choose to hide or show security notifications.
• Conf. DTMF sending - Always / First time only. Choose whether you want to confirm
before the phone sends DTMF tones during a voice call. See “Options during a call” on
page 20.For example, you can make a voice call while you are viewing a browser page,
send DTMF tones while a voice call is in progress, and save in Contacts a name and
phone number from a browser page.
• Wallet - Choose On if you want the wallet to open automatically when a compatible
browser page is opened.
Copyright © 2004 Nokia. All rights reserved.
Services and Applications
Browser settings
115
Services and Applications
Application manager
Go to Menu → Tools
→ App. manager
In Application manager you can install new compatible Symbian operating system
applications (SIS files) and Java™ applications (Java MIDlets and MIDlet suites). You can
also update and uninstall applications from the phone, and monitor the installation
history. See Fig. 21‚ on page 117.
Options in the
Application manager main
view: Install, View details,
View certificate, Update, Go
to web address, Remove,
View log, Send log, Settings,
App. downloads, Help, and
Exit.
Applications in Application manager use shared memory. See “Shared memory” on
page 16.
When you open Application manager, you can see a list of:
• Applications saved in Application manager.
• Partially installed applications (indicated by
).
• Fully installed applications that you can remove (indicated by
).
You can only use Symbian operating system applications with a .SIS extension.
Your phone supports J2ME™Java applications. Do not download PersonalJava™
applications to your phone as they cannot be installed.
Installing applications - general information
You can install applications that are specifically intended for this phone and suitable for
the Symbian operating system.
If you install an application that is not intended specifically for this phone, it may
function and look different from what was originally intended.
Applications may be downloaded to your phone during browsing, received as
attachments in multimedia messages or e-mails, or received via Bluetooth from another
device, for example, a phone or a compatible PC.
116
Copyright © 2004 Nokia. All rights reserved.
To increase protection, the application installation system uses digital signatures and
certificates for applications. Do not install the application if Application manager gives a
security warning during installation.
If you install an application that contains an update or repair to an existing application,
you can only restore the original application if you have the original application or a full
backup copy of the removed application. To restore the original application, first remove
the updated or repaired application and then install again from the original application
or the backup copy.
During installation, the phone checks the integrity of the application to be installed. The
phone shows information about the checks being carried out and you are given options
whether to continue or cancel the installation. Once the phone has checked the integrity
of the application, it is installed on your phone.
Fig. 21 The Application
manager main view.
Services and Applications
Important: Only install applications from sources that offer adequate protection
against harmful software.
Installing applications
• Open Application manager, scroll to the application, and select Options → Install to
start the installation.
• Alternatively, search the phone memory or the memory card, select the application,
and press
to start the installation.
Some applications may give the option of partial installation allowing you to select the
particular components of an application that you want to install. If you are installing an
application without a digital signature or a certificate, the phone warns you of the risks.
Continue installation only if you are absolutely sure of the origin and contents of the
application
Copyright © 2004 Nokia. All rights reserved.
117
Services and Applications
Installing Java™
The .JAR file is required for installation. If it is missing, the phone may ask you to
download it. If there is no access point defined for Application manager, you will be asked
to select one. When you are downloading the .JAR file, you may need to enter a user name
and password to access the server. You obtain these from the supplier or manufacturer
of the application.
• To start a data connection and to view extra information about the application, scroll
to it and select Options → Go to web address.
• To start a data connection and to check if there is an update available for the
application, scroll to it and select Options → Update.
Java settings
• To change the default access point that a Java application uses for downloading extra
data, select Options → Settings → Access point. See “Access points” on page 70.
• To change the security settings that determine the actions that a Java application is
permitted to do, select Options → Settings.
Not all Java applications permit you to change the security settings.
Removing an application
1 To remove an application, scroll to it and select Options → Remove.
2 Press Yes to confirm the removal.
If you remove an application, you can only re-install it if you have the original application
or a full backup of the removed application. If you remove an application, you may no
longer be able to open documents created with that application. If another application
depends on the application that you removed, the other application may stop working.
Refer to the documentation of the installed application for details.
118
Copyright © 2004 Nokia. All rights reserved.
Bluetooth connection
This device is compliant with Bluetooth Specification 1.1 supporting the following
profiles: Dial-up networking profile (DUN) as a gateway, object push profile (OPP) as a
client and server, File transfer profile (FTP) as a server, Hands-free profile (HFP) as an
audio gateway, Generic object exchange profile (GOEP), Generic access profile (GAP), and
serial port profile (SPP) with the PC connectivity software. To ensure interoperability
between other devices supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
Go to Menu →
Connectivity →
Bluetooth
Connectivity
10. Connectivity
There may be restrictions on using Bluetooth technology in some locations. Check with
your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background
while using other features, increase the demand on battery power and reduces the
battery life.
Bluetooth technology enables wireless connections between electronic devices within a
maximum range of 10 metres. A Bluetooth connection can be used to send images,
videos, texts, business cards, calendar notes, or to connect wirelessly to compatible
devices using Bluetooth technology, such as computers.
Fig. 22 Using Bluetooth.
Copyright © 2004 Nokia. All rights reserved.
119
Connectivity
Since devices using Bluetooth technology communicate using radio waves, your phone
and the other devices do not need to be in direct line-of-sight. The two devices only need
to be within a maximum of 10 metres of each other, although the connection can be
subject to interference from obstructions such as walls or from other electronic devices.
When you activate Bluetooth for the first time, you are asked to give a name to your
phone.
Bluetooth settings
• Bluetooth - On/Off.
• My phone's visibility - Shown to all - Your phone can be found by other Bluetooth
devices or Hidden - Your phone cannot be found by other devices.
• My phone's name - Define a name for your phone.
After you have set Bluetooth as active and changed My phone's visibility to Shown to all,
your phone and this name can be seen by other Bluetooth device users.
Sending data via Bluetooth
There can be only one active Bluetooth connection at a time.
1 Open an application where the item you wish to send is stored. For example, to send
a photo to another device, open the Gallery application.
120
Copyright © 2004 Nokia. All rights reserved.
Connectivity
2 Scroll to the item you want to send and select Options → Send → Via Bluetooth.
3 The phone starts to search for devices within range. Devices using Bluetooth
technology that are within range start to appear on the display one by one. You can
see a device icon, the device’s name, the device type, or a short name. Paired devices
are shown with
. A paired device is one where a Bluetooth connection already
exists between your phone and the other device.
• To interrupt the search, press Stop. The device list freezes and you can start to form
a connection to one of the devices already found.
When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your phone, enter the code *#2820# in
standby mode.
If you have searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select More devices. If you switch off
the phone, the list of devices is cleared and the device search needs to be started
again before sending data.
4 Scroll to the device you want to connect with and press Select. The item you are
sending is copied to Outbox and the note Connecting is shown.
5 Pairing (if not required by the other device, go to step 6.)
• If the other device requires pairing before data can be transmitted, a tone sounds
and you are asked to enter a passcode.
• Create your own passcode (1-16 characters long, numeric) and agree with the
owner of the other device to use the same code. This passcode is used only once
and you do not have to memorise it.
• After pairing, the device is saved to the Paired devices view.
6 When the connection has been successfully established, the note Sending data is
shown.
Fig. 23 Sending an image
via Bluetooth, the phone
starts to search for
devices.
Copyright protections may prevent some images, ringing tones, and other content from
being copied, modified, transferred or forwarded.
Copyright © 2004 Nokia. All rights reserved.
121
Connectivity
Data received via Bluetooth can be found in the Inbox folder in Messaging. See “Inbox receiving messages” on page 55.
Tip: Pairing means authentication. The users of the devices using Bluetooth
technology should agree together what the passcode is, and use the same
passcode for both devices in order to pair them. Devices that do not have a user
interface have a preset passcode.
Icons for different devices:
- Computer,
- Phone,
- Audio/video, and
- Bluetooth device.
If sending fails, the message or data will be deleted. The Drafts folder in Messaging does
not store messages sent via Bluetooth.
Checking the status of the Bluetooth connection
• When is shown in standby mode, Bluetooth is active.
• When
is blinking, your phone is trying to connect to the other device.
• When
is shown continuously, the Bluetooth connection is active.
Paired devices view
Paired devices are easier to recognise, they are indicated by
in the search result list.
In the Bluetooth main view, press
to open a list of paired devices (
).
• To pair with a device: Select Options → New paired device. The phone starts a device
search. Scroll to the device you want to pair with and press Select. Exchange
passcodes. The device is added to the Paired devices list.
• To cancel pairing: Scroll to the device whose pairing you want to cancel and press
or select Options → Delete. If you want to cancel all pairings, select Options →
Delete all.
If you are currently connected to a device, and delete the pairing with that device, the
pairing is removed and the device connection is terminated, but Bluetooth remains
active on the handset.
122
Copyright © 2004 Nokia. All rights reserved.
Connectivity
• To set a device to be authorised or unauthorised: Scroll to the device and select
Options → Set as authorised - Connections between your phone and this device can
be made without your knowledge. No separate acceptance or authorisation is needed.
Use this status for your own devices, for example, your PC, or devices that belong to
someone you trust. The icon
is added next to authorised devices in the Paired
devices view. Set as unauthorised - Connection requests from this device need to be
accepted separately every time.
• To assign a short name to a device: Select Options → Assign short name. Enter a
name for the device.
Receiving data via Bluetooth
When you receive data via Bluetooth, a tone sound is played and you are asked if you
want to accept the message. If you accept, the item is placed in the Inbox folder in
Messaging. Messages received via Bluetooth are indicated by
. See “Inbox - receiving
messages” on page 55.
Disconnecting Bluetooth
A Bluetooth connection is disconnected automatically after sending or receiving data.
Connection manager
In Connection manager you can identify the status of multiple data connections, view
details on the amount of data sent and received, and end unused connections. See
Fig. 24‚ on page 124.
Copyright © 2004 Nokia. All rights reserved.
Go to Menu →
Connectivity →
Connection manager
123
Connectivity
You can view details of data connections only. Voice calls are not listed.
When you open Connection manager, you can see a list of:
• Open data connections,
- Data call,
- GPRS
• The status of each connection.
• Amount of data uploaded and downloaded for each connection (GPRS connections
only).
• The duration of each connection (Data call connections only).
Note: The actual time invoiced for calls by your service provider may vary,
depending on network features, rounding off for billing, and so forth.
Fig. 24 The Connection
manager main view.
Options in the
Connection manager main
view when there are one
or more connections:
Details, Disconnect,
Disconnect all, Help and
Exit.
Viewing connection details
To view the details of a connection, scroll to a connection and select Options → Details
The following is displayed:
Name - The name of the Internet Access Point (IAP) in use.
Bearer - The type of data connection: Data call or GPRS.
Status - The current status of the connection.
Received - The amount of data, in bytes, received to the phone.
Sent - The amount of data, in bytes, sent from the phone.
Duration - The length of time that the connection has been open.
Speed - The current speed of both sending and receiving data in kB/s (kilobytes per
second).
124
Copyright © 2004 Nokia. All rights reserved.
Connectivity
Dial-up (GSM) - The dial-up number used, or Name (GPRS) - access point name used.
Shared (not displayed if the connection is not shared) - The number of applications using
the same connection.
Ending connections
• Scroll to a connection and select Options → Disconnect to end that connection only.
• Select Options → Disconnect all to close all currently open connections.
Connecting your phone to a compatible
computer
For further information on how to make a connection to a compatible computer via USB
or Bluetooth, and how to install Nokia PC Suite 6.1, see the User's Guide for Nokia PC
Suite on the CD-ROM. For further information on how to use Nokia PC Suite, see the help
function on PC Suite or visit the support pages at www.nokia.com.
Sync - remote synchronisation
The Sync application enables you to synchronise your calendar or contacts with various
calendar and address book applications on a compatible computer or on the Internet.
Synchronisation takes place over a GSM data call or packet data connection.
Go to Menu →
Connectivity → Sync
The synchronisation application uses SyncML technology for synchronisation. For
information on SyncML compatibility, please contact the supplier of the calendar or
address book application you want to synchronise your phone data with.
Copyright © 2004 Nokia. All rights reserved.
125
Connectivity
126
Creating a new synchronisation profile
Options in the
Remote sync main view:
Synchronise, New sync
profile, Edit sync profile,
Delete, View log, Help, and
Exit.
1 If no profiles have been defined, the phone asks you if you want to create a new
profile. Select Yes.
To create a new profile in addition to existing ones, select Options → New sync profile.
Choose whether you want to use the default setting values or copy the values from
an existing profile to be used as the basis for the new profile.
2 Define the following:
Sync profile name - Write a descriptive name for the profile.
Access point - Select an access point you want to use for the data connection.
Host address - Contact your service provider or system administrator for the correct
values.
Port - Contact your service provider or system administrator for the correct values.
User name - Your user ID for the synchronisation server. Contact your service provider
or system administrator for your correct ID.
Password - Write your password. Contact your service provider or system
administrator for the correct value.
Press
to select:
Calendar - Select Yes if you want to synchronise your calendar.
Remote database - Enter a correct path to the remote calendar on the server. Must be
defined if the previous setting Calendar has been set to Yes.
Contacts - Select Yes if you want to synchronise your contacts.
Remote database - Enter a correct path to the remote address book on the server. It
must be defined if the previous setting Contacts has been set to Yes.
3 Press Done to save the settings.
Copyright © 2004 Nokia. All rights reserved.
In the Sync main view, you can see the different profiles, and what kind of data will be
synchronised: Calendar, Contacts, or both.
1 In the main view, scroll to a profile and select Options → Synchronise. The status of
the synchronisation is shown at the bottom of the screen.
To cancel synchronisation before it is finished, press Cancel.
2 You are notified when the synchronisation has been completed.
• After synchronisation is complete, press View log or select Options → View log to
open a log file showing the synchronisation status (Complete or Incomplete) and how
many calendar or contact entries have been added, updated, deleted, or discarded (not
synchronised) in the phone or on the server.
Copyright © 2004 Nokia. All rights reserved.
Connectivity
Synchronising data
127
Troubleshooting
11. Troubleshooting
Memory low
When the following notes are shown, the phone memory is
low and you must start to delete some data: Not enough
memory to perform operation. Delete some data first. or Memory
low. Delete some data. To view what kind of data you have and
how much memory the different data groups consume, go to
File manager and select Options → Memory details.
You may want to delete the following items regularly to
avoid memory getting low:
• Messages from the Inbox, Drafts, and Sent folders in
Messaging.
• Retrieved e-mail messages from the phone memory.
• Saved browser pages.
• Images and photos in Images.
If you want to delete contact information, calendar notes, call
timers, call cost timers, game scores, or any other data, go to
the respective application to remove the data.
• Before date - to delete all calendar notes which take place
before a certain date. Enter the date before which all
calendar notes will be deleted.
• All entries - to delete all calendar notes.
Erasing log information - To erase all the log contents,
Recent calls register, and Messaging delivery reports
permanently, go to Logs and select Options → Clear log or go
to Settings → Log duration → No log.
Different ways to store data:
• Use Nokia PC Suite 6.1 to make a backup copy of all data
to a compatible computer.
• Send images to your e-mail address and then save the
images to your computer.
• Send data via Bluetooth to a compatible device.
• Store data on a compatible memory card.
If you are deleting multiple items and another of the
following notes are shown: Not enough memory to perform
operation. Delete some data first. or Memory low. Delete some
data. try deleting items one by one (starting from the smallest
item).
Clearing calendar memory - To remove more than one event
at a time, go to the Month view and select Options → Delete
entry → and either:
128
Copyright © 2004 Nokia. All rights reserved.
Phone display
• Q. Why do missing, discoloured or bright dots appear on
the screen every time I turn on my phone?
A. This is a characteristic of this type of display. Some
displays may contain pixels or dots that remain on or off.
This is normal, not a fault.
Camera
• Q: Why do images look smudgy?
A: Check that the camera lens protection window is clean.
Bluetooth
• Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your phone, you can
either end the connection using the other device or by
deactivating Bluetooth. Go to Bluetooth and select the
setting Bluetooth → Off.
• Q: Why can’t I find my friend’s Bluetooth-enabled device.
A: Check that both have activated Bluetooth.
Check that the distance between the two devices is not
over 10 metres or that there are no walls or other
obstructions between the devices.
Check that the other device is not in ‘Hidden’ mode.
Check that both devices are compatible.
Multimedia messaging
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message. Delete
some data first. To view what kind of data you have and
how much memory the different data groups consume, go
to File manager and select Options → Memory details.
• Q: How can I end the data connection when the phone
starts a data connection again and again? The notes:
Retrieving message or Trying to retrieve message again are
shown briefly. What is happening?
A: The phone is trying to retrieve a multimedia message
from the multimedia messaging centre.
Check that the settings for multimedia messaging have
been defined correctly and that there are no mistakes in
phone numbers or addresses. Go to Messaging and select
Options → Settings → Multimedia message.
To stop the phone from making a data connection, you
have the following options. Go to Messaging and select
Options → Settings → Multimedia message, and then:
• Select On receiving msg. → Defer retrieval if you want the
multimedia messaging centre to save the message to
be retrieved later, for example, after you have checked
the settings. After this change, the phone still needs to
send information notes to the network. To retrieve the
message later, select Retr. immediately.
Troubleshooting
Q&A
• Q: What should I do when the phone tells me that it
cannot receive a multimedia message because memory is
full?
Copyright © 2004 Nokia. All rights reserved.
129
Troubleshooting
• Select On receiving msg. → Reject message - if you want
to reject all incoming multimedia messages. After this
change, the phone needs to send information notes to
the network and the multimedia messaging centre will
delete all multimedia messages that are waiting to be
sent to you.
• Select Multimedia reception → Off - if you want to
ignore all incoming multimedia messages. After this
change the phone will not make any network
connections related to multimedia messaging.
Messaging
• Q: Why can’t I select a contact?
A: If you cannot select a contact in the Contacts directory,
the contact card does not have a phone number or an email address. Add the missing information to the contact
card in the Contacts application.
Calendar
• Q: Why are the week numbers missing?
A: If you have changed the Calendar settings so that the
week starts on a day other than Monday, then the week
numbers will not be shown.
Browser Services
• Q: No valid access point defined. Define one in Web settings.
A: Insert proper browser settings. Contact your service
provider for instructions.
130
Log
• Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select Options → Filter → All communication.
PC connectivity
• Q: Why do I have problems in connecting the phone to my
PC?
A: Make sure that Nokia PC Suite 6.1 is installed and
running on your PC. See the User’s Guide for Nokia PC
Suite on the CD-ROM. For further information on how
to use Nokia PC Suite, see the help function on PC
Suite or visit the support pages at www.nokia.com.
Access codes
• Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your phone dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial Internet Service
Provider (ISP), service provider, or network operator.
Application not responding
• Q: How do I close an application that is not responding?
A: Open the application switching window by pressing
and holding . Then scroll to the application, and press
to close the application.
Copyright © 2004 Nokia. All rights reserved.
Charging and Discharging
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, buy a new battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave the battery connected to a
charger. Overcharging may shorten its lifetime. If left unused,
a fully charged battery will lose its charge over time.
Temperature extremes can affect the ability of your battery to
charge.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Battery information
12. Battery information
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire! Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Copyright © 2004 Nokia. All rights reserved.
131
Enhancement
13. Enhancement
A new extensive range of enhancements is available for
your phone. Select the enhancements which
accommodate your specific communication needs. Some
of the enhancements are described in detail below.
List of compatible enhancements:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
132
Wireless Headset HDW-2
Wireless Clip-on Headset HS-3W
Wireless Boom Headset HS-4W
Boom Headset HDB-4
Headset HS-5
Retractable Headset HS-10
Wireless Car Kit CK-1W
Advanced Car Kit CK-7W
Mobile Charger LCH-12
TRAVEL CHARGER ACP-12
Wrist strap
Xpress-on covers
Connectivity Cable DKU-2
RS MMC 64MB
RS MMC 128MB
16.
17.
18.
19.
20.
21.
Nokia Observation Camera
Image Viewer SU-2
Image Viewer SU-5
Image Album PD-1
Nokia Digital Pen SU-1B
Battery BL-5C
Some of the enhancements are described in detail below.
For availability of the enhancements, please check with your
local dealer. A few practical rules for enhancements
operation:
• Keep the enhancements out of small children's reach.
• When you disconnect the powercord of any accessory,
grasp and pull the plug, not the cord.
• Check regularly that all mobilephone equipment in a
vehicle is mounted and operating properly.
Use only batteries, chargers and enhancements approved by
the phone manufacturer. The use of any other types may
invalidate any approval or warranty applying to the phone,
and may be dangerous.
Copyright © 2004 Nokia. All rights reserved.
Wireless Clip-on Headset HS-3W
Type
Tech
Talktime#
Standby#
BL-5C
Li-Ion
up to 3 hours
up to 250 hours
Enhancement
Battery
# Variation in operation times may occur depending on
SIM card, network and usage settings, usage style and
environments.
Wireless Headset HDW-2
Easy-to-wear wireless headset with a clip-on main body and
earpiece for both business and pleasure.
The headset uses Bluetooth wireless technology between the
main body and a compatible phone. Basic call handling from
headset and LED indicating active wireless connection.
• Wireless audio connection between a compatible phone
and headset.
• Small, lightweight device.
Copyright © 2004 Nokia. All rights reserved.
133
Enhancement
Boom Headset HDB-4
Wireless Car Kit CK-1W
This small and lightweight headset has a beautiful and
distinctive Nokia design. Gives you excellent audio quality
and you can answer or end calls by pressing the button on the
microphone part of the headset.
Creates a wireless audio connection in your car with
handsfree features, excellent audio quality, and a remote
control button for easy use of handsfree options.
This kit includes:
• Remote Control Button CUW-2
• Handsfree Unit HFW-1
• Microphone HFM-8
• Speaker HFS-12
• Power Cable PCU-4
Nokia Image Viewer SU-2
View and share pictures at work or at home by sending your
images wirelessly from the compatible phone to the Nokia
Image Viewer connected to your compatible TV or video
projector. Powered by primary batteries, it is easy to take with
you.
134
Copyright © 2004 Nokia. All rights reserved.
Enhancement
Nokia Digital Pen SU-1B
Use your digital pen to create colourful, personalized
messages and send them to your compatible phone using
Bluetooth technology, and forward them via MMS. You can
also use your pen to store your notes on your compatible PC.
Copyright © 2004 Nokia. All rights reserved.
135
Care and Maintenance
136
14. Care and Maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery and allow the device to dry completely
before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as
instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
Copyright © 2004 Nokia. All rights reserved.
A few practical rules about accessories and
enhancements
• Keep all accessories and enhancements out of the reach
of small children.
• When you disconnect the power cord of any accessory or
enhancement, grasp and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle
are mounted and are operating properly.
• Installation of any complex car enhancements must be
made by qualified personnel only.
Operating environment
Remember to follow any special regulations in force in any
area and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. To maintain
compliance with radio frequency exposure guidelines only
use enhancements approved by Nokia for use with this device.
When the device is on and being worn on the body, always
use an approved holder or carrying case.
Parts of the device are magnetic. Metallic materials may be
attracted to the device, and persons with a hearing aid should
not hold the device to the ear with the hearing aid. Always
secure the device in its holder, because metallic materials
may be attracted by the earpiece. Do not place credit cards or
other magnetic storage media near the device, because
information stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician
or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you
have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct
you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Additional safety information
15. Additional safety information
Pacemakers Pacemaker manufacturers recommend that a
minimum separation of 6 in. (15.3 cm) be maintained
between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. Persons
with pacemakers should:
Copyright © 2004 Nokia. All rights reserved.
137
Additional safety information
138
• always keep the device more than 6 in. (15.3 cm) from
their pacemaker when the device is switched on;
• not carry the device in a breast pocket; and
• hold the device to the ear opposite the pacemaker to
minimise the potential for interference.
If you have any reason to suspect that interference is taking
place, switch off your device immediately.
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid
(antilock) braking systems, electronic speed control systems,
air bag systems. For more information, check with the
manufacturer or its representative of your vehicle or any
equipment that has been added.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply
to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive
materials in the same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place
objects, including installed or portable wireless equipment in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of
wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
Copyright © 2004 Nokia. All rights reserved.
Important: Wireless phones, including this device,
operate using radio signals, wireless networks,
landline networks, and user-programmed functions.
Because of this, connections in all conditions
cannot be guaranteed. You should never rely solely
on any wireless device for essential
communications like medical emergencies.
To make an emergency call:
1 If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2 Press
as many times as needed to clear the display
and ready the device for calls.
3 Key in the official emergency number for your present
location. Emergency numbers vary by location.
4 Press the
key.
Additional safety information
Emergency calls
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Copyright © 2004 Nokia. All rights reserved.
139
Additional safety information
140
Certification information (SAR)
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES
The highest SAR value for this device when tested for use at
the ear is 0.54 W/kg.
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) recommended by
international guidelines (ICNIRP). These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines were
developed by independent scientific organisations through
periodic and thorough evaluation of scientific studies. The
guidelines include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health.
This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at
least 2.2 cm away from the body. When a carry case, belt clip
or holder is used for body-worn operation, it should not
contain metal and should position the product at least 2.2 cm
away from your body.
The exposure standard for mobile devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit stated in the international guidelines is
2.0 W/kg*. Tests for SAR are conducted using standard
operating positions with the device transmitting at its highest
certified power level in all tested frequency bands. Although
the SAR is determined at the highest certified power level, the
actual SAR of the device while operating can be well below
the maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are
to a base station, the lower the power output of the device.
In order to transmit data files or messages, this device
requires a quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is
completed.
* The SAR limit for mobile devices used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The guidelines incorporate a substantial margin of
safety to give additional protection for the public and to
account for any variations in measurements. SAR values may
vary depending on national reporting requirements and the
network band. For SAR information in other regions please
look under product information at www.nokia.com.
Copyright © 2004 Nokia. All rights reserved.
Index
A
Access points
Settings 70
Alarm clock
Snooze 96
Animations 40
Applications
Installing 117, 118
Removing files 118
Automatic answer 75
B
Background images 46
Bluetooth 119
Closing the connection 123
Connection requests 121
Connection status indicators 122
Device icons 122
Pairing 121
Pairing requests 121
Passcode, glossary
explanation 122
Preset passcode 122
Receiving data 123
Sending data 120
Unique device address 121
Browser
Connecting 110
Ending connections 114
Icons 110
Service messages 57
WAP pages 108
XHTML pages 108
Browsing 111
C
Cache
Clearing 113
Call register
See Log
Calls
Answering 20
Conference calls 19
Dialled 23
Diverting 20
Duration 23
International 17
Missed 22
Options during a call 20
Received 22
Rejecting 20
Settings 69
Transferring 20
Copyright © 2004 Nokia. All rights reserved.
Cell broadcast messages 61
Cell info display 75
Certificates
Trust settings 79
Chat
Sending messages 101
Clearing memory
Log information 128
Closed chat group 104
Computer connections 125
Conference calls 19
Connecting to a PC 125
Connection
Viewing 124
Connection indicators
Bluetooth 122
Contact cards
Removing ringing tones 27
Contact groups 29
Contacts
Data Import 36
Copying
Contacts between the SIM card
and phone memory 26
Text 53
Creating
Contact cards 25
141
D
G
M
Data connections to network
Ending 125
Viewing 124
Data Import
Contacts 36
Dialled numbers 23
Digital rights management 113
Diverting calls 20
Gallery
Picture messages 46
Uploading images 47
GIF animations 40
GPRS
See Packet data
GPRS connections 124
GSM data connections 124
E
I
E-mail
Deleting 59
Retrieving from mailbox 58
Enhancement 132
Erasing
Recent calls register 23
Image server 47
Importing data from other Nokia
phones 36
Indicators 12
Info service 61
Installing applications 117
Installing Java files 118
Media files
File formats 41
Mute 42
Seek 42
Media gallery 44
Background images 46
Memory
Viewing memory details 80
Memory low
Viewing memory consumption 107
Menu 13
Menu key 13
Missed calls 22
Mobile browser 108
Music files
See Media files
Mute 42
F
Favourites
Adding a shortcut 88
File formats
RealPlayer 41
SIS file 116
File manager 80
Folders
Creating 14
Organising 14
142
J
N
Java
Installing Java applications 118
See Applications.
L
Language
for writing 68
Listening to messages 18
Copyright © 2004 Nokia. All rights reserved.
Nickname in chat 99
P
Packet data
Connection timer 24
Data counter 24
Settings 73
Pairing, glossary explanation 122
Password
Memory card 106
PC Suite 125
Personalisation 86
Personalise 86
Alarm 97
Phonebook
See Contacts
Picture messages 45, 46
Pictures 45, 46
PIN code
Unblocking 76
Predictive text input
Tips 52
Turning off 52
Profiles 84
Adding voice commands 82
Renaming 85
R
Received calls 22
Receiving
Data via Bluetooth 123
Ringing tones, Operator logos, and
settings, see Smart messages
Recent calls register
Call duration 23
Dialled numbers 23
Erasing call lists 23
Missed calls 22
Received calls 22
Recorder, recording sounds 97
Recording video 39
Rejecting calls 20
Remote synchronisation 125
Removing an application 118
Removing software 118
Ringing tones
Muting 20
Receiving in a smart message 56
S
Screen saver
Settings 69
Seek 42
Sending
Data via Bluetooth 120
Service command editor 61
Shared memory 16
Shortcuts
in Favourites 88
SIM card
Copying names and numbers 26
SIS file 116
Smart messages
Receiving 56
Snooze 96
Software
Removing 118
Transferring a .SIS file to your
phone 116
Copyright © 2004 Nokia. All rights reserved.
Sound clips 45
Sound files
See Media files
Sounds
Removing a personal ringing
tone 27
Standby mode
Indicators 12
Settings 68
Stopping
Alarm clock 96
Switching between applications 13
Synchronisation
See Remote synchronisation.
T
Transferring calls 20
U
Uploading images 47
USSD commands 61
V
Video clips 45
See Media files
Video player
See RealPlayer
Video recorder
Memory card 40
Saving video clips 39
Settings 39
143
Viewing
Connection details 124
GIF animations 40
Network data connection
details 124
Voice commands 81
Voice mailbox 18
Changing the number 18
Voice messages 18
Voice recorder 97
Voice tags
Making calls 28
Volume control 15
W
WAP pages
Browser 108
Writing
Predictive text input, turning
off 52
X
XHTML pages
Browser 108
144
Copyright © 2004 Nokia. All rights reserved.
Open as PDF
Similar pages