*#1
Model 2-2:Thank you, and congratulations on your choice of a Hammond PK-25PXK.
The PK-25PXK is the MIDI pedalboard for Hammond XK-3.
In order to get the most out of this instrument for many years to come, first take the
time to read this manual in full.
Owner’s Manual
IMPORTANT SAFETY NOTICE
2
CAUTION
This symbol indicates information that, if ignored or applied incorrectly,
creates the possibility of death or serious personal injury.
Follow instructions:
Damage Requiring Service:
All operation and user instructions should be
followed.
Do Not Disassemble:
Do not disassemble this unit.
Servicing:
The user should not attempt to service the
appliance beyond that is described in the
Operation Instructions. All other servicing
should be referred to qualified service
personnel.
Location:
Using the unit in the following locations can
result in a malfunction.
Š In direct sunlight
Š Locations of extreme temperature or
humidity
Š Excessively dusty or dirty locations
Š Locations of excessive vibration
Š Close to magnetic fields
The appliance should be serviced by qualified
service personnel when:
Š The power supply cord or the plug has
been damaged; or
Š Objects have fallen, or liquid has been
spilled into the appliance; or
Š The appliance has been exposed to rain;
or
Š The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
Š The appliance has been dropped, or the
enclosure damaged.
Children:
If you let your children use this unit, please
always watch and guide them and do not leave
them alone.
Do Not Cause a Shock
Do not drop or cause a shock to this unit.
Object and Liquid Entry:
Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure
through openings.
ATTENTION
This symbol indicates information that, if ignored or applied incorrectly,
creates the possibility of personal injury or property damage.
and electrical shock.
Stack/Ride:
Do not stack heavy devices or get on this
unit. Such may cause personal injuries or
falling down.
Transfer:
Remove all the cables when you transfer this
unit, to avoid damages on the cables, or an
electric shock or fire.
Do Not Pull the Cord:
Be sure to grasp the plug when unplugging it
from a wall outlet. Pulling on the power cord
can damage it, and create the danger of fire
*#1
2-2:-Owner’s
Manual
Hook Up:
Turn off all devices before hook up.
Follow all instructions and use only designated
cables.
Movable Parts:
Make sure not to pinch your fingers when you
assemble or disassemble this unit.
NAMES AND FUNCTIONS
3
6
3
4
7
5
2
8
1
9
1. Pedal keyboard
25-notes, non-velocity pedal keyboard.
2. Expression Pedal
It works as Exp. Pedal 1 (EXP-100) of the XK-3.
3. Knob Bolt
Fix the Expression Pedal assembly.
4. Foot Switch
It works as Foot Switch 2 (EXP-100) of the XK-3.
5. LED
It displays the note is playing, and some values.
6. Key-Scan Cable
Scanning the Pedal Keyboard, and read the playing
notes.
7. Expression Jack
Sending out the expression information and input the
power supply.
8. MIDI OUT Jack
Sending out the playing information.
9. Foot Rest
Put your foot for rest.
Π8-Pin Cable
For Expression connection and power supply.
ΠMIDI Cable
For MIDI connection.
*#1
2-2:-Owner’s
Manual
XK-SYSTEM STRUCTURE
4
Place the cable labels as the need arises.
*#1
2-2:-Owner’s
Manual
BASIC ASSEMBLY
5
 Do this assembly carefully to avoid pinching your fingers or dropping
anything on your feet.
1.
Insert into the
opening
Mount the Expression Pedal on the Pedal
Keyboard and fix it by using the knob bolt.
Turn
2.
Connect the Key-Scan Cable to the connector on the Pedal Keyboard.
3.
Plug in the 8-Pin cable to the Expression
jack and the MIDI cable to the MIDI out
jack.
*#1
2-2:-Owner’s
Manual
ADVANCED OPERATION
6
‹REBOUND TIME
If you play the pedals very fast with a staccato action or if
the leafsprings used on the pedals change the characteristic
in time (which is a normal situation in heavy use) it may
happen that the pedal key bounces a little on release. It may
have the effect that you will hear the tone twice.
On previous models you could only solve this by increasing
the tension on the leafsprings. With this model you can
also avoid this effect very quickly by adjusting the rebound
time setting.
To change the value, turn on the power while pressing the
highest B and the key corresponding to its value. (See the
left figure.)
Then, the LED on the left of the Expression Pedal blinks
slowly the number of times indicating the value.
The setting range is 1 to 16 times (x) 1.22 milliseconds. 4
times (x) 1.22 milliseconds is the default.
Note: Too long rebound time causes delay in the sound.
‹MIDI CHANNEL
You can change the MIDI channel of the Pedal Keyboard for
special purposes.
To change the MIDI channel, turn on the power while pressing the highest C and the key corresponding to its value.
(See the left figure.)
Then, the LED on the left of the Expression Pedal blinks fast
the number of times indicating the value.
The setting range is Channel 1 to 16. Channel 3 is default.
‹LOAD DEFAULT VALUES
To reset the PK-25PXK to the initial status, turn on the power
while pressing the highest A#, B and C (See the left figure).
Then, the LED on the left side of the Expression Pedal blinks
three times, indicating the reset procedure.
*#1
2-2:-Owner’s
Manual
MIDI IMPLEMENTATION
[Hammond MIDI Keyboard]
Model: PK-25PXK
Function
Default
Basic
Channel
Changed
Default
Mode
Messages
Altered
Note
Number
: True Voice
Note ON
Velocity
Note OFF
Key's
After
Ch's
Touch
Pitch Bender
Date: 23-Dec-2004
Version: 1.0
MIDI Implementation Chart
Transmitted
3
1 - 16
3
X
*****
36 - 60
*****
X
X
X
X
X
X
7
Recognized
Remarks
X
X
X
X
X
X
X
X
X
X
X
Control
Change
Program
X
Change
: True #
*****
X
System Exclusive
: Song Position X
System
: Song Select
X
Common
: Tune
X
System
: Clock
X
Real Time : Commands
X
: Local On/Off
X
Aux
: All Notes Off
X
Messages : Active Sense O
: Reset
X
Mode 1:
OMNI ON, POLY
Mode 3:
OMNI OFF, POLY
X
X
X
X
X
X
X
X
X
X
X
X
Mode 2: OMNI ON, MONO
Mode 4: OMNI OFF, MONO
*#1
O: Yes
X: No
2-2:-Owner’s
Manual
SPECIFICATIONS
8
Keyboard
Accesories
25 keys
MIDI Cable (2.0m)
8-Pin Cable (1.5m)
Cable Label “MIDI” (2pcs)
Cable Label “EXP” (2pcs)
Controls
Expression, Foot Switch
Terminals
MIDI out
Expression
Dimension
108(W), 90(D), 20(H)cm (without Expression Pedal)
Weight
55 lbs (25 kg)
SERVICE
Hammond maintains a policy of continuously improving and upgrading its instruments and therefore reserves the right to
change specifications without notice. Although every attempt has been made to insure the accuracy of the descriptive
contents of this Manual, total accuracy cannot be guaranteed.
Should the owner require further assistance, inquiries should first be made to your Authorized Hammond Dealer. If you
still need further assistance, contact Hammond at the following addresses:
In the United States contact:
In Europe contact:
All other countries contact:
HAMMOND SUZUKI USA, Inc.
733 Annoreno Dr.
Addison, IL 60101
UNITED STATES
HAMMOND SUZUKI EUROPE
B.V.
IR. D.S. Tuynmanweg 4A
4131 PN Vianen
THE NETHERLANDS
HAMMOND SUZUKI Ltd.
25-11, Ryoke 2 Chome
Hamamatsu 430-0852
(Shizuoka)
JAPAN
Website:
www.hammondorganco.com
E-mail: Info@hammondsuzuki.com
Website: www.hammondsuzuki.com
Website: www.suzuki-music.co.jp
Technical materials are available and can be obtained by mailing a request to the appropriate address listed above marked
ATTENTION: SERVICE DEPARTMENT.
Manufacturer:
SUZUKI MUSICAL INSTRUMENT MFG. CO., Ltd.
25-12, Ryoke 2 Chome
Hamamatsu 430-0852 (Shizuoka)
JAPAN
Printed in Japan
*#1
2-2:-Owner’s
Manual
00457-40125
V1.00-050919
Open as PDF
Similar pages