User Guide
SANYO Mirro™
www.boostmobile.com
Kyocera manufactures and markets the SANYO wireless line of products.
© 2010 Kyocera Corporation. All Rights Reserved. BOOST and BOOSTMOBILE and
Logo, and the Logo are trademarks of Boost. Other marks are the property of their
respective owners. “SANYO” is a registered trademark of SANYO Electric Co., Ltd. and 
is used under license. KYOCERA is a registered trademark of Kyocera Corporation.
Table of Contents
Tip
Looking for something? If you don’t see it in the headings listed
here, try the Index on page 103.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . . . . . .
Section 1: Getting Started . . . . . . . . . . . . . . . . . . .
1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . .
i
i
1
2
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Section 2: Your Phone. . . . . . . . . . . . . . . . . . . . . . . 5
2A. Phone Basics . . . . . . . . . . . . . . . . . . . . . . . . . 6
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . 8
Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . 10
Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Navigating Through the Menus . . . . . . . . . . . . . . . . . . . 12
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . 13
Setting the Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . 13
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Simple Data Exchange . . . . . . . . . . . . . . . . . . . . . . . . . 23
2B. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Volume Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ringtone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TTY Use With Service . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Hearing Aid Device Compatibility Function . . .
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . .
Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
27
28
30
31
32
33
33
35
2C. History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
History Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
History Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a Call From History . . . . . . . . . . . . . . . . . . . . .
Saving a Number From History . . . . . . . . . . . . . . . . . . .
Making a New Group Entry From History . . . . . . . . . . . .
Deleting History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
39
39
39
40
40
40
41
2D. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
About Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying Contacts Entries . . . . . . . . . . . . . . . . . . . . .
Displaying Contacts Details . . . . . . . . . . . . . . . . . . . . .
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . .
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . .
Creating a Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . .
Using Contacts Information in Other Applications . . . . .
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . .
Selecting a Ringtone Type for an Entry . . . . . . . . . . . . .
Assigning a Picture to an Entry . . . . . . . . . . . . . . . . . . .
Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . .
My Name Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dialing Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
42
43
43
43
43
44
45
45
46
46
47
47
47
48
2E. Calendar and Tools . . . . . . . . . . . . . . . . . . . 49
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
51
52
53
53
53
2F. Voice Services . . . . . . . . . . . . . . . . . . . . . . 54
Automatic Speech Recognition (ASR) . . . . . . . . . . . . . . 54
Managing Voice Services . . . . . . . . . . . . . . . . . . . . . . . 57
2G. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending Media Mail . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Media Mail . . . . . . . . . . . . . . . . . . . . . . . . . . .
60
64
65
67
2H. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 68
About Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . .
Making Your Phone Discoverable . . . . . . . . . . . . . . . . .
Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . .
Viewing the Trusted Devices List . . . . . . . . . . . . . . . . .
Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . .
Printing Pictures via Bluetooth . . . . . . . . . . . . . . . . . . .
68
68
68
69
70
70
71
72
Section 3: Service . . . . . . . . . . . . . . . . . . . . . . . . 73
3A. Service: The Basics . . . . . . . . . . . . . . . . . . 74
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Text Messaging (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . 76
Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Making a 3-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
3B. Web and Data Services . . . . . . . . . . . . . . . . 81
Getting Started With Data Services . . . . . . . . . . . . . . . . 81
Accessing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Downloading Games, Ringtones, and More . . . . . . . . . . 86
Browser Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Data Services FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
3C. Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . 91
GPS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Section 4: Safety and Warranty Information. . . . . 93
4A. Important Safety Information . . . . . . . . . . . . 94
General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Maintaining Safe Use of and Access to Your Phone . . . . 94
Using Your Phone With a Hearing Aid Device . . . . . . . . . 96
Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Radio Frequency (RF) Energy . . . . . . . . . . . . . . . . . . . . 98
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
User Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . 100
Copyright Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
4B. Manufacturer’s Warranty . . . . . . . . . . . . . 101
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . 101
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Introduction
Your Phone’s Menu
This User Guide introduces you to Boost service and all the
features of your new phone. It’s divided into four sections:
The following table outlines your phone’s main menu structure.
For more information about using your phone’s menus, see
“Navigating Through the Menus” on page 12.
⽧
Section 1: Getting Started
⽧
Section 2: Your Phone
⽧
Section 3: Service
⽧
Section 4: Safety and Warranty Information
User
Guide
Note
Because of updates in phone software, this printed
guide may not be the most current version for your
phone. Visit www.boostmobile.com/userguides to
access the most recent version of the user guide.
WARNING
Please refer to the Important Safety Information
section on page 94 to learn about information that will
help you safely use your phone. Failure to read and
follow the Important Safety Information in this phone
guide may result in serious bodily injury, death, or
property damage.
Missed Alerts
History
Contacts
Messaging
1: Voicemail
2: Send Message
3: Text Messages
4: Media Mail
5: Email
6: IM
7: Settings
Re-Boost
Get Stuff
i
Web
My Stuff
4: Settings & Info
1: Location
3: Slideshow Interval
5: Help
1: Games
Bluetooth
2: Ringtones
3: Applications
1: On/Off
4: Wallpapers
2: Visibility
5: Chat Flirt Fun
3: Add New
4: Trusted Devices
Navigation
Pictures
5: My Bluetooth Info
Settings/Tools
1: Camera
Press the right softkey to view the following options:
1: Picture Mode
3: Self-Timer
5: Image Controls
7: Review Media
9: User Settings
2: Media Mail
3: My Album
ii
2: Status Bar
4: Account Info
2: Zoom
4: Fun Tools
6: CameraSettings
8: Key Guidance
1: Settings
1: Display
3: Ringtones
5: Text Entry
7: Lock Phone
9: Others
2: Volume
4: Keyguard
6: Phone Info
8: Reset/Delete
2: Tools
1: Alarm
3: Update Phone
5: Assigned Media
7: Countdown
9: World Clock
2: Calendar
4: Voice Service
6: Calculator
8: Stopwatch
iii
Section 1
Getting Started
2. Press
1A. Setting Up Service
⽧
⽧
⽧
⽧
Setting Up Your Phone (page 2)
Activating Your Phone (page 2)
Setting Up Your Voicemail (page 2)
Getting Help (page 3)
Setting Up Your Phone
to turn the phone on.
If your phone is activated, it will turn on, search for service,
and enter standby mode.
䡲 If your phone is not yet activated, see “Activation Kit” for
more information.
䡲
3. Make your first call.
䡲
䡲
Use your keypad to enter a phone number.
Press
.
Note
Your phone’s battery should have enough charge for your phone
to turn on and find a signal, set up your voicemail, and make a
call. You should fully charge your battery as soon as possible.
See “Charging the Battery” on page 12 for details.
1. Install the battery.
Insert the battery into the opening on the back of the
phone, making sure the connectors align ( ), and gently
press it down ( ).
䡲 Position the battery cover and slide it upward until it snaps
into place ( ).
䡲
Activating Your Phone
To activate your new Boost phone, please refer to your “Activation
Kit”.
Setting Up Your Voicemail
Your phone automatically transfers all unanswered calls to your
voicemail, even if your phone is in use or turned off. You should
2
1A. Setting Up Service
1. From standby mode, press and hold
2. Follow the system prompts to:
.
Create your passcode.
䡲 Record your name announcement.
䡲 Record your greeting.
From Your Phone
䢇
䢇
䢇
䡲
Note
Voicemail Passcode Boost strongly recommends that you
create a passcode when setting up your voicemail to protect
against unauthorized access. Without a passcode, anyone who
has access to your handset is able to access your voicemail
messages.
For more information about using your voicemail, see “Voicemail”
on page 74.
Getting Help
Dial #225 (#BAL) to check minute usage and account balance.
Dial #233 (#ADD) to make a payment.
Dial #611 to access a summary of your service plan or get
answers to other questions.
From Any Other Phone
䢇
Boost Customer Care: 1-888-BOOST-4U (1-888-266-7848).
411
You can get up to three pieces of information per call, and the
operator can automatically connect your call at no additional
charge.
There is a per-call charge to use 411, and you will be billed for
airtime.
䊳
Press
.
Operator Services
Managing Your Account
You can go to ‘My Account’ on boostmobile.com to view your
account information, recharge your account, or to make account
changes. To log into ‘My Account’, you will need your 7-digit phone
number and the Account PIN number you set up at activation.
Operator Services provides assistance when placing collect calls
or when placing calls billed to a local telephone calling card or
third party.
䊳
Press
.
1A. Setting Up Service
3
Setting Up Service
set up your Voicemail and personal greeting as soon as your
phone is activated.
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality. All features, functionality and other specifications, as
well as the information contained in this user guide are based upon
the latest available information and are believed to be accurate at
the time of printing. Kyocera Communications, Inc. reserves the
right to change or modify any information or specifications without
notice or obligation.
4
1A. Setting Up Service
Section 2
Your Phone
Your Phone
2A. Phone Basics
1. Earpiece
2. Main Screen
⽧
Your Phone (page 6)
⽧
Viewing the Display Screen (page 8)
⽧
Turning Your Phone On and Off (page 10)
⽧
Battery and Charger (page 11)
⽧
Navigating Through the Menus (page 12)
⽧
Displaying Your Phone Number (page 13)
⽧
Setting the Keyguard (page 13)
⽧
Making and Answering Calls (page 13)
⽧
Entering Text (page 20)
⽧
Simple Data Exchange (page 23)
13. Softkeys
12. Headset Jack
11. Navigation Key
3. MENU/OK Key
4. Web Key
5. TALK Key
15. Outer Screen
7. Keypad
Phone Software Upgrades – Updates to your phone’s software
may become available from time to time. Boost will automatically
upload critical updates to your phone. You can also use the menu
to check for and download updates. Press MENU/OK > 
19. Micro-USB Connector
17. Camera Lens
18. Battery
Release Slot
20. Volume Button
21. Camera Button
Settings/Tools > Tools > Update Phone > Software Version
to search for and download available updates.
6
2A. Phone Basics
14. LED Indicator
6. Microphone
16. Speaker
Tip
10. BACK Key
9. SPEAKER Key
8. END/POWER Key
22. Internal Antenna
1. Earpiece lets you hear the caller and automated prompts.
2. Main Screen displays all the information needed to operate
your phone, such as the call status, the Contacts list, the
date and time, and the signal and battery strength.
9. SPEAKER Key lets you place or receive voice calls and
activate ASR in speakerphone mode, or turn the
speakerphone mode on or off during a call.
10. BACK Key deletes characters from the display in text input
3. MENU/OK Key lets you access the phone’s menus and select
mode. When in a menu, pressing it returns you to the
previous menu. This key also allows you to return to the
previous screen in a data session.
the highlighted choice when navigating through a menu.
11. Navigation Key scrolls through the phone’s menu options and
4. Web Key lets you launch the Web browser.
5. TALK Key allows you to place or receive calls, answer Call
Waiting, use 3-Way Calling, or activate Automatic Speech
Recognition (ASR).
6. Microphone allows other callers to hear you clearly when you
are speaking to them.
7. Keypad lets you enter numbers, letters and characters and
navigate within menus. You can use the numeric keypad for
speed dialing (see “Speed Dialing” on page 19).
8. END/POWER Key lets you turn the phone on or off, end a call,
or cancel your input and return to idle mode (standby mode
or service search mode).
acts as a shortcut key from standby mode. These keys can
be reassigned to create customized shortcuts. See
“Navigation Key Shortcuts” on page 33.
12. Headset Jack allows you to plug in an optional headset for
convenient, hands-free conversations. CAUTION! Inserting an
accessory into the incorrect jack may damage the phone.
13. Softkeys let you select softkey actions or menu items
corresponding to the bottom left and right lines on the main
screen.
14. LED Indicator shows the status of your phone and charging at
a glance.
15. Outer Screen lets you monitor the phone’s status and see
who is calling without opening the phone.
2A. Phone Basics
7
Phone Basics
Key Functions
16. Speaker lets you hear the different ringtones and sounds.
You can mute the ringtone when receiving incoming calls by
pressing
or the side camera button. The speaker also
lets you place or receive voice calls and activate ASR in
speakerphone mode.
17. Camera Lens, as part of the built-in camera, lets you take
pictures.
18. Battery Release Slot lets you open the battery cover to
replace the battery.
19. Micro-USB Connector allows you to connect a compatible
charging cable or USB data cable (not included). CAUTION!
Inserting an accessory into the incorrect jack may damage
the phone.
20. Volume Button allows you to adjust the ringtone volume whenever
Viewing the Display Screen
The status bar at the top of your phone’s display screen provides
information about your phone’s status and options. These tables
identify the major symbols you’ll see on the status bar or other
positions of your phone’s display screen.
Tip
To view a list of your phone’s icons and descriptions, press
MENU/OK > Settings/Tools > Settings > Phone Info > 
Icon Glossary.
Service Icons
Signal Strength – Your phone’s current signal strength.
(More bars = stronger signal.)
No Service – Your phone cannot find a usable signal.
your phone is turned on or adjust the voice volume during a call.
21. Camera Button lets you access the Pictures menu. Press and
hold to activate the camera mode and take pictures. This
button also allows you to mute the ringtone when receiving
incoming calls.
22. Internal Antenna facilitates reception and transmission. To
maximize performance, do not obstruct the internal antenna
while communicating. (See page 13.)
8
2A. Phone Basics
Data Service – Data service is available. When active, the
icon is animated.
Data Service Dormant – Data service is currently dormant.
Data Service Unavailable – Data service is currently
unavailable.
Location On – Your phone’s location feature is on and
available for location-based services such as GPS
Navigation.
Messaging Icons
Email – You have one or more new email messages
waiting.
Multiple Mails – You have two or more different types of
new messages waiting.
Media Mails – You have one or more new media mails
waiting.
Location Off – Your phone’s location feature is off. Your
location is available only for 911.
Text Messages – You have one or more new text
messages waiting.
Silence All – Your phone’s sound is turned off.
Voicemail – You have one or more new voicemail
messages waiting.
Vibrate All – Your phone’s sound is turned off but vibrate is
turned on.
Phone Basics
Status Icons
Battery – Your phone’s current battery charge level. (The
icon to the left shows the battery is fully charged.) The
icon is animated while the battery is charging.
Urgent Messages – You have one or more new urgent
messages waiting.
Ringtone Off – Your phone’s ringtone is turned off.
1 Beep – A beep sounds when you receive an incoming
call, a message, etc.
1 Beep and Vibrate – 1 Beep and vibrate are set.
Ringtone and Vibrate – The volume level is set to between
1 and 8 and vibrate is turned on.
Bluetooth Icons
Visible – Your phone is discoverable by (visible to) other
Bluetooth devices.
Connected – Your phone is connected to a Bluetooth
device.
Enable – Your phone’s Bluetooth feature is enabled.
Speaker Mode – Your phone is in speaker mode.
* The above icons will blink while your phone is communicating with a Bluetooth device.
2A. Phone Basics
9
Voice Call Icons
Missed Call – You have one or more missed voice calls.
Bluetooth Device – A call is in progress using a Bluetooth
device.
Headset – A call is in progress using an optional wired
headset.
Car Kit – A call is in progress using an optional car kit
device.
Others
TTY – Your phone is connected to a TTY device.
Alarm – An alarm or countdown is set.
Notification – You have events, alarms, or countdown
notifications.
HAC Enabled – Your phone’s HAC setting is enabled.
10
2A. Phone Basics
Turning Your Phone On and Off
Turning Your Phone On
䊳 Press and hold
.
Once your phone is on and finds a signal, it automatically enters
standby mode – the phone’s idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. When
a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key except numbered keys.
Tip
The Power Save feature conserves your battery power when you
are in an area where there is no signal.
Turning Your Phone Off
Press and hold
for two seconds until you see the
powering-down animation on the display screen.
Your screen remains blank while your phone is off unless the
battery is charging.
䊳
WARNING
Use only manufacturer-approved batteries and chargers
with your phone. The failure to use a manufacturerapproved battery and charger may increase the risk that
your phone will overheat, catch fire, or explode, resulting
in serious bodily injury, death, or property damage.
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It
allows you to recharge your battery before it is fully drained. The
battery provides up to 5.8 hours of continuous digital talk time.
For a quick check of your battery level, glance at the battery
charge indicator located in the upper right corner of your phone’s
display screen. When there are approximately five minutes of talk
time left, the battery icon ( ) turns red and the phone sounds a
warning tone.
After an additional five minutes or so, the phone sounds a
warning tone three times and then turns off.
Note
Tip
Watch your phone’s battery level indicator and charge the battery
before it runs out of power.
Installing the Battery
See “Setting Up Your Phone” on page 2.
Removing the Battery
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. To open, insert a fingernail into the slot (
pressure while sliding the cover down (
), and apply light
).
3. Lift the battery up and remove it from the phone (
WARNING
).
Do not handle a damaged or leaking Li-Ion battery as
you can be burned.
Long backlight settings, searching for service, vibrate mode,
browser use, and other variables may reduce the battery’s talk
and standby times.
2A. Phone Basics
11
Phone Basics
Battery and Charger
Charging the Battery
Selecting Menu Items
Keeping track of your battery’s charge is important. If your battery
level becomes too low, your phone automatically turns off, and
you will lose any information you were just working on.
Always use a manufacturer-approved desktop charger, travel
charger, or vehicle power adapter to charge your battery.
As you navigate through the menu, menu options are highlighted.
Select any option by highlighting it and pressing
. If the option
is numbered, you can select it by pressing the corresponding
number on the phone’s keypad.
For example, to open the alarm setting screen:
1. Plug the phone charger into an electrical outlet.
1. Press
2. Plug the other end of the phone charger into the micro-USB
2. Select Settings/Tools by highlighting it and pressing
connector located on the upper left side of your phone.
With the manufacturer-approved Li-Ion battery, you can recharge
the battery before it becomes completely run down.
Navigating Through the Menus
The navigation key on your phone lets you scroll through menus
quickly and easily. Many menus feature a scroll bar on the right to
help you keep track of your position in the menu.
To navigate through a menu, press the navigation key up or down.
For a diagram of your phone’s menu, please see “Your Phone’s
Menu” on page i.
12
2A. Phone Basics
to access the main menu.
3. Select Tools by highlighting it and pressing
4. Select Alarm by highlighting it and pressing
.
.
.
For the purposes of this guide, the above steps condense into:
䊳
Press
> Settings/Tools > Tools > Alarm.
Backing Up Within a Menu
䊳
Press
to go to the previous menu.
䊳
Press
to return to standby mode.
䡲
䡲
Press
> Settings/Tools > Settings > Phone Info > 
Phone#/User ID.
Your phone number and other information about your phone and
account will be displayed.
䊳
Setting the Keyguard
To avoid accidentally pressing a side button, this feature enables
you to lock side buttons while the phone is closed.
1. Press
> Settings/Tools > Settings > Keyguard.
2. Select On or Off.
Tip
You can deactivate this feature temporarily by opening the
phone, or by pressing and holding the side camera button while
the phone is closed.
Side buttons will be temporarily unlocked, for example, when:
䡲 Receiving a call.
䡲 Talking on a call.
䡲 Receiving voicemail, messages, or calendar or alarm
notifications.
JAVA or Camera is activated.
Making an emergency call or in emergency mode.
Note
If you select Icon Only under Messaging > Settings >
Notification, notifications will not unlock side buttons. (See
“Setting Message Notification” on page 30.)
Making and Answering Calls
Holding Your Phone
Phone Basics
Displaying Your Phone Number
To maximize performance, do not obstruct the internal antenna
area.
Correct
Incorrect
Internal Antenna
2A. Phone Basics
13
Making Calls
䢇
1. Make sure your phone is on.
2. Enter a phone number from standby mode. If you make a
mistake while dialing, press
3. Press
4. Press
Tip
.
when you are finished.
To redial your last outgoing call, press TALK, highlight the call,
and then press TALK again.
When making calls off the Network, always dial using 11 digits (1
+ area code + phone number).
You can also place calls from your phone by speed dialing
(page 19), by using Automatic Speech Recognition (page 54), and
by using your History listings (page 40).
Dialing Options
When you enter numbers in standby mode, you can see available
dialing options by pressing OPTIONS (right softkey). To select an
option, highlight it and press
.
䢇 Save to save a phone number in your Contacts. (See “Saving a
Phone Number” on page 17.)
14
2A. Phone Basics
䢇
to erase the numbers.
䢇
Contact Details to view the detailed information of a Contacts
entry when the number you have entered is already saved in
your Contacts.
Hard Pause to insert a hard pause. (See “Dialing and Saving
Phone Numbers With Pauses” on page 18.)
2-Sec. Pause to insert a two-second pause. (See “Dialing
and Saving Phone Numbers With Pauses” on page 18.)
Tip
You can also send a text message, or Media Mail when the left
softkey displays SEND MESSAGE.
Answering Calls
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press
to answer an incoming call. (Depending on your
settings, you may also answer incoming calls by pressing
other keys. See “Call Answer Mode” on page 34.)
Your phone notifies you of incoming calls in the following ways:
䢇 The phone rings or vibrates.
䢇 The backlight illuminates.
䢇 The screen displays an incoming call message.
Note
Ignore with Text may not be displayed when calls are from
entries identified as No Caller ID, Private (Restricted ID), or
Unavailable ID.
Ending a Call
䊳
Press
.
Missed Call Notification
When an incoming call is not answered, your screen displays the
Missed Call log. Press
to dial the phone number.
To display a Missed Alerts entry from standby mode:
1. Press
> Missed Alerts.
2. Highlight the entry you wish to view and press
.
Phone Basics
If the incoming call is from a number stored in your Contacts, the
entry’s name is displayed. The caller’s phone number may also be
displayed, if available.
For other actions when receiving a call, you can select an
onscreen menu or press a key:
䡲 Press
to answer the call in speaker mode.
䡲 Answer to answer the call.
䡲 When connecting via Bluetooth, select Answer with
<Bluetooth device name> or Answer with Phone to answer a
call with your selected device.
䡲 Silence to mute the ringtone and stop the vibration. Pressing
or the camera button has the same effect.
䡲 Send to Voicemail to ignore the call and transfer it to your
voicemail.
䡲 Ignore with Text to ignore the call and send a text message
to the caller.
䡲 Press
to ignore the call.
Calling Emergency Numbers
You can always place calls to 911 (dial
),
even if your phone is locked or your account is restricted.
During an emergency call, press OPTIONS (right softkey) to
display your options. Highlight an option and press
.
䢇 Transfer Audio to switch the call to a Bluetooth device (if
applicable).
䢇 Contacts to display your Contacts list.
䢇 Voice Memo to record the other party’s voice.
Note
Please make sure to secure permission prior to recording the
other party’s voice during a call.
2A. Phone Basics
15
䢇
Phone Info to display your Phone Info menu.
Tip
Press MY PHONE# (left softkey) to display your phone number
during an emergency call.
Exiting Emergency Mode
If you end the emergency call by pressing
, your phone enters
Emergency mode. Press
to exit Emergency mode.
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning System
(GPS) chip necessary for utilizing E911 emergency location
services where available.
When you place an emergency 911 call, the GPS feature of your
phone seeks information to calculate your approximate location.
Depending on several variables, including availability and access
to satellite signals, it may take up to 30 seconds or more to
determine and report your approximate location.
Important
Always report your location to the 911 operator
when placing an emergency call. Some designated
emergency call takers, known as Public Safety
Answering Points (PSAPs) may not be equipped to
receive GPS location information from your phone.
In-Call Options
Pressing OPTIONS (right softkey) during a call displays a list of
available in-call features.
䢇 Transfer Audio to switch the call to a Bluetooth device (if applicable).
䢇 Save to save the current call’s phone number in your Contacts.
䢇 Contact Details to display information about the caller stored in
your Contacts.
䢇 Main Menu to display the phone’s main menu.
䢇 3-Way Call to open a call with two other parties.
䢇 Contacts to display your Contacts list.
䢇 Voice Memo to record the other party’s voice.
Note
Please make sure to secure permission prior to recording the
other party’s voice during a call.
Phone Info to display information about your phone.
Press the volume button up or down to adjust the receiver
volume.
䊳 Press MUTE or UNMUTE (left softkey) to switch between the
mute or unmute mode. (Muting applies to your voice, not
the other party’s.)
䊳 Press
to turn the speaker on. Press again to turn it off.
䢇
䊳
WARNING
16
2A. Phone Basics
Because of higher volume levels, do not place the phone
near your ear during speakerphone use.
End-of-Call Options
Saving a Phone Number
After you have finished your call, the phone will display an end-ofcall message. “Call ended” and the duration of the call will
alternately flash beneath the caller’s name (if already in your
Contacts) or the caller’s number (if available). Press any key below
to select an option; press any other key to stop the end-of-call
display.
Your phone can store up to 300 Contacts entries and each entry
can contain up to seven phone numbers. (See section 2D,
“Contacts,” on page 42.)
Press
to call a highlighted entry.
䊳
Press
to display all history for a highlighted entry.
䊳
Press OPTIONS (right softkey) to display the Recent History
options. (See “History Options” on page 39 for details.)
䊳
Press SEND MESSAGE (left softkey) to send a text message
or media mail.
䊳
Press
the new entry name.
– or –
If you chose Existing Entry, select an entry to which you want
to save the number, and then highlight a number type and
press
.
4. Press DONE (left softkey) to save the entry.
to return to standby mode.
Press
or simply wait 10 seconds to return to where you
were before the call (if applicable).
If you press a key other than one of those above, the Recent
History screen is displayed. (See “Viewing History” on page 38.)
䊳
OPTIONS (right softkey) > Save.
2. Select New Entry or Existing Entry.
3. If you chose New Entry, select a number type, and then enter
Finding a Phone Number
You can search Contacts entries for phone numbers that contain a
specific string of numbers.
1. Enter four or more digits of the number in standby mode.
(The more numbers you enter, the more specific the search
becomes.)
2. All Contacts entries matching the entered numbers will be
displayed. Highlight an entry and press
to dial the number.
2A. Phone Basics
17
Phone Basics
䊳
1. From standby mode, enter a phone number and press
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or credit card billing numbers.
There are two types of pauses available on your phone:
䢇 Hard Pause sends the next set of numbers when you press
.
䢇 2-Sec. Pause automatically sends the next set of numbers after
two seconds.
Note
You can have multiple pauses in a phone number and combine
two-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > Hard Pause or 2-Sec. Pause.
3. Enter additional numbers.
4. Press OPTIONS (right softkey) > Save > New Entry or 
Existing Entry to save the number in your Contacts. 
(See steps 3 and 4 in “Saving a Phone Number” on
page 17.) 
Press
to dial the number.
to send the additional number if you selected 
Hard Pause in step 2.
5. Press
18
2A. Phone Basics
Dialing From the Contacts List
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the entry you want to call.
3. Press
to dial the entry’s default phone number.
– or –
Press the navigation key left or right to show another number
for the entry and press
.
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your
location. (This feature is subject to network availability.)
1. Press and hold
to display “+ ” on your phone screen.
2. Dial the country code and phone number you’re calling, and
press
. The access code for international dialing will
automatically be dialed, followed by the country code and
phone number.
You can store up to 98 numbers in your phone’s speed dial
memory to make contacting friends and family easier.
You must assign a speed dial number to the existing phone number
beforehand. See “Assigning Speed Dial Numbers” on page 46.
To use speed dial for locations 2-9:
䊳
From standby mode, press and hold the appropriate key for
approximately two seconds.
To activate the Prepend feature:
1. Press
> Settings/Tools > Settings > Others > Call Setup >
Abbrev. Dial.
2. Select Prepend > On.
3. Enter a five- or six-digit number and press
.
To place a call using Abbreviated Dialing:
1. Enter the four or more digits of any part of a Contacts entry’s
phone number to use the Contacts Match feature.
To use speed dial for locations 10-99:
– or –
From standby mode, press appropriate keys, and then press
.
The display confirms that the number has been dialed when it
shows “Connecting...”.
Enter the last four or five digits of the number to use the
Prepend feature.
䊳
Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use either
of the following abbreviated dialing features.
䢇 Contacts Match – Retrieve any number saved in your Contacts
by entering the four or more digits of any part of the number.
䢇 Prepend – Prepend the first five or six digits (for example, the
area code and prefix) to any four or five digits you enter.
Note
2. Press
Phone Basics
Speed Dialing
Contacts Match will not retrieve numbers if you enter 911 or
reserved three-digit service numbers such as 411 or 611.
to call the displayed number.
If there are two or more matched numbers in your Contacts,
a list is displayed. Highlight the name or the phone number
you want to call, and then press
to place a call.
2A. Phone Basics
19
Entering Text
Selecting a Text Input Mode
Your phone provides convenient ways to enter words or symbols
whenever you are prompted to enter text.
1. Press OPTIONS (right softkey) > Text Mode on the message
entry screen.
– or –
Press TEXT MODE... (right softkey) from other text input
screens, such as Contacts or Signature.
2. Select one of the following options:
Tip
If you see a triangle to the right of a menu option, you can switch
between related menus by pressing the navigation key right or
left.
ABC to use multi-tap entry. – press
once for “a,” twice
for “b”, three times for “c.” (See page 21.)
䡲 Predictive to enter text using a predictive text input system
that reduces the number of keypresses required while
entering a word. (See page 21.)
䡲 Number to enter numbers.
䡲 Symbols to enter symbols.
䡲
20
2A. Phone Basics
Smileys to enter smile icons.
Emoticons to enter “emoticons.” (This is available, for
example, when composing a message, or when editing a
Schedule or To Do description in Calendar.)
䡲 Web Shortcut to enter Web shortcuts (for example, www.,
http://, or .com). To display this menu on the message
entry screen, press OPTIONS (right softkey)> Text Mode >
Web Shortcut.
䡲 Paste List to paste copied or cut text (if applicable).
䡲 Select Language to select the language (English or Spanish).
䡲 Delete All to delete all text (if applicable).
䡲 Select Text to select text for copying or cutting (if applicable).
䡲 Add Word to store words that you frequently use.
䡲 Text Settings to display the Text Entry settings menu.
䡲
䡲
Tip
When entering text, press * (Shift) to change the capitalization
style as Predictive > PREDICTIVE > predictive (Predictive
mode), or as Abc > ABC > abc (ABC mode). The selected style
is displayed in the bottom-right corner of the screen, above the
right softkey label (if applicable).
Text Entry Settings
1. Press OPTIONS (right softkey) > Text Mode > Text Settings on
the message entry screen.
2. Highlight an option and press
.
Input Language to select the language (English or Spanish).
䡲 My Words to edit or delete custom words you have added to
the predictive text database.
● Add Word to store words that you frequently use.
䡲 Word Prediction to automatically display the word that may
follow the current text input.
䡲 Word Completion to suggest possible words based on letters
you have entered when the Predictive Text input mode is
turned on (see page 20).
䡲 Word Scan to allow the predictive text input system to suggest
words it finds in Contacts and messages.
䡲 Word Choice List to display the word choice list.
䡲 Auto-Complete to show completed words or phrases that
match partial words or phrases you have entered regardless of
whether the ABC input mode or the Predictive Text input mode
is turned on.
䡲 Help to view the Predictive Text instructions.
䡲
ABC Input Mode
In the ABC input mode, also known as multi-tap entry, you press
keys one, two, three, or four times to enter the letters you see on
the keypad. For example, press
once for “a,” twice for “b”,
or three times for “c”; or press
once for “p,” twice for “q,”
three times for “r,” or four times for “s.”
1. Select the ABC input mode. (See page 20.)
2. Press the corresponding keys repeatedly until the correct
letter appears. (For example, to enter the word “Bill,” press
twice,
three times,
three times, and
three times again.) (If you make a mistake, press
to erase
a single character. Press and hold
to erase an entire word.)
By default, the first letter of an entry is capitalized and the
following letters are lowercased. After a character is entered, the
cursor automatically advances to the next space after two
seconds or when you enter a character on a different key.
Predictive Text Input
Predictive Text input, also known as T9 Text Input, lets you enter
text by pressing keys just once per letter. (To select the Predictive
Text input mode when entering text, see page 20.)
Predictive Text input uses an intuitive word database to analyze
the letters you enter and create a suitable word. (The word may
change as you type.)
2A. Phone Basics
21
Phone Basics
– or –
Press TEXT MODE... (right softkey) > Text Settings from other
text input screens.
– or –
> Settings/Tools > Settings >
From standby mode, press
Text Entry.
1. Select the Predictive Text input mode.
2. Press the corresponding keys once per letter to enter a
word. A word choice list opens and shows words starting
with the letters you have entered thus far. (For example, to
enter the word “Bill,” press
.) (If you
make a mistake, press
to erase a single character.
Press and hold
to erase an entire word.)
If the word you want is not displayed after you have entered all the
letters, press the navigation key down to scroll through additional
word selections. To accept a word and insert a space, press
or
.
Adding a Word to the Predictive Text Database
If a word you want to enter is not displayed as an option while you are in
the Predictive Text input mode, add it to the database.
1. While you are in the Predictive Text input mode, select 
<Add Word> in a word choice list.
– or –
Press OPTIONS (right softkey) > Text Mode > Add Word on the
message entry screen.
– or –
Press TEXT MODE... (right softkey) > Add Word from other text
input screens.
22
2A. Phone Basics
2. Enter a word and press SAVE (left softkey). The word will
appear as an option the next time you scroll through options
during the Predictive Text input mode.
To edit or delete the words you have added:
1. Press OPTIONS (right softkey) > Text Mode > Text Settings > 
My Words on the message entry screen.
– or –
Press TEXT MODE... (right softkey) > Text Settings > 
My Words from other text input screens.
– or –
From standby mode, press
Text Entry > My Words.
> Settings/Tools > Settings >
2. Highlight a word and press OPTIONS (right softkey).
3. Highlight an option and press
.
Edit to edit a word in My Words. When finished, press SAVE
(left softkey) to save your changes.
䡲 Delete to delete a word in My Words. Press YES (left
softkey) to confirm the deletion.
For more information about Predictive Text (T9) visit the Nuance
website at http://www.nuance.com/t9/textinput/.
䡲
Street Address Options
䊳
This feature makes it easy to select certain information from a
text, email, or media mail message and automatically save it or
use it in a related application.
Simple Data Exchange works with these types of information:
䢇 Email addresses
䢇 Street addresses
䢇 Phone numbers
䢇 Web addresses (URLs)
Email Address Options
䊳
Highlight an email address (or a saved Contacts entry name
in the From/To field in the message details screen), press
, and select an option:
䡲 Send Message to select Text Message, Media Mail, or Email.
The selected messaging application will open and the email
address will appear as the message’s recipient.
䡲 Share to select Text Message or Email. The selected
application will open and the email address will appear in
the message body.
䡲 Save to Contacts to save the email address in Contacts.
䡲 Contact Details to display the Contacts entry if the email
address is already saved in Contacts.
Highlight a street address, press
, and select an option:
Share to select Text Message or Email. The selected
application will open and the address will appear in the
message body.
䡲 Save to Contacts to save the address in Contacts.
䡲
Phone Number Options
䊳
Highlight a phone number (or a saved Contacts entry name
in the From/To field in the message details screen), press
, and select an option:
䡲 Call to call the phone number.
䡲 Prepend to prepend a number to the phone number.
䡲 Send Message to select Text Message or Media Mail. The
selected messaging application will open and the phone
number will appear in the To: field.
䡲 Share to select Text Message or Email. The selected
application will open and the phone number will appear in
the message body.
䡲 Save to Contacts to save the phone number in Contacts.
䡲 Contact Details to display the Contacts entry if the phone
number is already saved in Contacts.
2A. Phone Basics
23
Phone Basics
Simple Data Exchange
Web Address (URL) Options
䊳
24
Highlight a Web address (URL), press
, and select an
option:
䡲 Browse to open the browser to the Web page.
䡲 Share to select Text Message or Email. The selected
application will open and the Web address will appear in
the message body.
䡲 Save to Contacts to save the Web address in Contacts.
2A. Phone Basics
2. Select a wallpaper option by pressing the navigation key up
2B. Settings
or down, and select a wallpaper.
3. Press
.
Changing the Brightness
You can adjust the brightness on the main screen. When the
Power Save Mode is on, and when the Backlight Dim setting is
Always Dim, you cannot change this setting.
⽧
Display Settings (page 25)
⽧
Volume Settings (page 27)
⽧
Ringtone Settings (page 28)
⽧
Messaging Settings (page 30)
1. Press
⽧
Airplane Mode (page 31)
2. Highlight a brightness level and press
⽧
TTY Use With Service (page 32)
⽧
Using the Hearing Aid Device Compatibility Function (page 33)
⽧
Phone Setup Options (page 33)
⽧
Security Settings (page 35)
Changing the Wallpaper
You can set a wallpaper to display while in standby mode.
1. Press
> Settings/Tools > Settings > Display > Wallpaper.
.
Changing the Backlight Time Length
Select how long the main screen and keypad remain backlit after
any keypress is made.
1. Press
> Settings/Tools > Settings > Display > Backlight >
Backlight Dim or Backlight Off.
䡲 If you select Backlight Dim, select Always Bright, Always Dim,
or a preset length of time to elapse before the screen
backlight dims.
䡲 If you select Backlight Off, select a preset length of time to elapse
before the screen and keypad backlights turn off. (When you
select Always Bright for the Backlight Dim setting above, the
keypad backlight will turn off after about one minute.)
2B. Settings
25
Settings
Display Settings
> Settings/Tools > Settings > Display > Brightness.
Note
Long backlight settings reduce the battery’s talk and standby
times.
Selecting a Picture ID
> Settings/Tools > Settings > Display > Picture ID.
2. Select Contacts, Unsaved Numbers, or Private / Unknown.
䡲
If you select Contacts, select All Contacts, or select
One Contact and then select an entry.
3. Select a picture ID option by pressing the navigation key up
or down, and then select an image.
䡲 If you select Take New Picture, press
to take a picture.
4. If you are satisfied with the image on the preview screen,
press
Changing the Clock/Calendar Display
Choose which design of clock or calendar you want to display in
standby mode.
You can select an image as a picture ID.
1. Press
3. Read the message and press CONTINUE (left softkey).
.
> Settings/Tools > Settings > Display > 
Clock/Calendar.
1. Press
2. Highlight a display option and press
Changing the Text Greeting
The screen displays a text greeting in standby mode. Choose the
phone’s default greeting, or enter your own custom greeting.
1. Press
This feature helps conserve your battery power by automatically
adjusting settings for certain phone features.
> Settings/Tools > Settings > Display > 
Power Save Mode.
1. Press
2. Select On. (Select Off to deactivate this feature.)
26
2B. Settings
> Settings/Tools > Settings > Display > Greeting.
2. Select Default or Custom.
䡲
Power Save Mode
.
If you select Custom, enter a custom greeting and 
press
. (See “Entering Text” on page 20.)
Changing the Phone’s Menu Style
Choose the layout of your phone’s menu.
1. Press
to display the main menu.
2. Press OPTIONS (right softkey) > List View or Grid View.
Adjust the display and text input font size. This setting does not
affect all screens.
䊳
From the main menu screen, press OPTIONS (right softkey) >
Large Font or Normal Font to change the font size.
– or –
> Settings/Others > Settings > Others > 
Accessibility > Font Size.
1. Press
2. Highlight Normal Font or Large Font. You can see the
highlighted font size in the New Size window.
3. If you are satisfied with the font size, press SAVE (left
softkey).
Display Language
You can choose to display your phone’s onscreen menus in
English or in Spanish.
1. Press
> Settings/Tools > Settings > Others > Language.
2. Select English or Español.
Volume Settings
Adjusting the Phone’s Volume Settings
Adjust your phone’s volume settings to suit your needs and your
environment.
1. Press
> Settings/Tools > Settings > Volume.
2. Select Incoming Ringtone, Playback Volume, Power Up/Down, or
Key Beeps.
If you select Power Up/Down, select On or Off.
䡲 If you select Key Beeps, select Tone Volume or Tone Type.
䡲
3. Select a volume level or type and press
.
To change the incoming ringtone or playback volume:
1. Press the volume button up or down for most applications,
including playing sounds. A volume setting screen is
displayed.
Settings
Changing the Font Size
2. Press the volume button up or down to select the volume
level, and then press
or close the phone. (When the
Ringtone and Playback tabs are both displayed, you can
switch between tabs by pressing the navigation key left or
right.
2B. Settings
27
Tip
You can make the incoming ringtone vibrate at any volume level
by pressing VIBRATE (left softkey) on the volume setting screen.
Silence All
The Silence All option allows you to mute all sounds without
turning your phone off.
To activate Silence All:
䊳
Press and hold the volume button down in standby mode.
(The screen will display “Silence All.”)
To deactivate Silence All:
䊳
Press the volume button up repeatedly to select a volume
level.
Ringtone Settings
Ringtone Types
Ringtone types help you identify incoming calls and messages.
You can assign ringtone types to individual Contacts entries, types
of calls, and types of messages.
28
2B. Settings
Selecting Ringtone Types for Incoming Calls
> Settings/Tools > Settings > Ringtones > 
Incoming Calls.
1. Press
2. Select Contacts, Unsaved Numbers, or Private / Unknown.
䡲
If you select Contacts, select All Contacts, or select
One Contact and then select an entry.
3. Select a ringtone option by pressing the navigation key up or
down, and then select a ringtone. (See “Getting New
Ringtones” on page 29 if you selected Downloaded > 
Get Stuff. )
Selecting Ringtones for Messages
1. Press
> Settings/Tools > Settings > Ringtones >
Messaging.
2. Select Text Message, Media Mail, or Email.
3. For Email, skip to step 4. Otherwise, select Contacts, 
Unsaved Numbers, or Private / Unknown.
If you select Contacts, select All Contacts, or select
One Contact and then select an entry.
䡲
4. Select a ringtone option by pressing the navigation key up or
down, and then select a ringtone.
Ringtone types can be assigned from the Contacts menu. See
“Selecting a Ringtone Type for an Entry” on page 46.
Selecting Ringtones for Voicemail, Calendar, and
Power Up/Down
1. Press
> Settings/Tools > Settings > Ringtones.
2. Select Voicemail, Calendar, or Power Up/Down.
3. Select a ringtone option by pressing the navigation key up or
down, and then select a ringtone.
Getting New Ringtones
A wide variety of new ringtones is available, and you can access
them right from your phone. (Additional charges may apply, but
some are free.)
1. Press
> Settings/Tools > Settings > Ringtones.
2. Select a ringtone type category (Incoming Calls, Voicemail,
Messaging, etc.) and any applicable subcategories until you
arrive at the “Assign?” screen.
3. Select Downloaded > Get Stuff (The application will launch
4. Use the navigation key and keypad to search through
available ringtones. When you find one you want, highlight it
and press
.
5. To purchase the ringtones, highlight Buy and press
.
(The ringtones will download automatically.)
6. When the download is finished, select an option to continue:
Listen to listen to the ringtone.
Set as to assign the ringtone to a call or message type or to
a specific contact.
䡲 Shop to browse for other items to download.
䡲
䡲
Setting Up Voice Guide
Voice Guide allows you to hear voice prompts and spoken
numbers or key names as you press a key, and also to hear
menus and options, and Contacts names, email addresses, URLs,
etc., as you highlight each item onscreen. (The default setting is
Off. )
1. Press
> Settings/Tools > Settings > Others > Accessibility >
Voice Services > Voice Guide.
2. Select On or Off.
and display the Ringtones menu.).
2B. Settings
29
Settings
Tip
Note
When the ringtone volume is set to Silence All or Vibrate All,
Voice Guide does not work.
Messaging Settings
Selecting Vibration Patterns
Your phone’s advanced messaging capabilities let you send and
receive many different kinds of messages without placing a voice
call.
Messaging settings allow you to decide how your phone notifies
you of new messages, create a signature with each sent
message, and create your own preset messages.
With this feature, you can select vibration patterns for incoming
calls, messages, alarms, and scheduled events.
Setting Message Notification
The voice guide language depends on the language selected in
MENU/OK > Settings/Tools > Settings > Others > 
Language > English or Español.
1. Press
> Settings/Tools > Settings > Others > Accessibility >
Vibrate Type.
2. Select Incoming Calls, Voicemail, Messaging, Alarm/Calendar, or
Power Up/Down.
3. If you select Messaging, select the message type. Otherwise
skip to step 4.
4. Highlight a vibration pattern and press
.
When you receive a message, your phone notifies you by
displaying an icon on your display screen. You can also choose to
be notified with a message notification on your display screen.
1. Press
> Messaging > Settings > Notification.
2. Select Msgs and Icon or Icon Only.
Text Messaging Settings
Setting a Callback Number
With this feature, you can specify the callback number which your
recipients see when you send text messages.
1. Press
30
2B. Settings
> Messaging > Settings > Callback Number.
2. Select My Phone Number, Other, or None. If you select Other,
enter a callback number and press
.
Adding a Customized Signature
Add a customized signature to each message you send.
1. Press
> Messaging > Settings > Signature.
2. Select On. (If you do not wish to attach a signature to your
outgoing messages, select Off. )
3. Enter a signature and press
Tip
.
Press OPTIONS (right softkey) > Add Signature to insert your
signature on the message entry screen.
2. To edit or delete a message, highlight it and press OPTIONS
(right softkey).
3. Select Edit, edit the message, and press
.
– or –
Select Delete > YES (left softkey) to delete the message. (You
can also reset all messages by selecting Reset all messages >
YES [left softkey].)
To change the language of the preset message:
1. Press
> Messaging > Settings > Preset Messages.
2. Press OPTIONS (right softkey) > Select Language.
3. Select English or Spanish.
Managing Preset Messages
To edit or delete a preset message:
1. Press
> Messaging > Settings > Preset Messages. The list
of preset messages will be displayed.
Airplane Mode
Airplane Mode allows you to use many of your phone’s features,
such as games and voice memos, when you are in an airplane or
in any other area where making or receiving calls or data
connection is prohibited. When you set your phone to Airplane
Mode, it cannot send or receive any calls or access online
information.
2B. Settings
31
Settings
Your phone is loaded with 17 preset messages to help make
sending text messages easier. Customize or delete these
messages, such as “Where are you?,” “See you later,” and “Meet
me at” to suit your needs, or add your own messages to the list.
> Settings/Tools > Settings > Others > 
Airplane Mode.
1. Press
2. Read the disclaimer and press
.
3. Select an option:
On to activate Airplane Mode when you select this option.
Airplane Mode will be deactivated again when you turn the
phone off.
䡲 Off to deactivate Airplane Mode.
䡲 On Power-up to activate Airplane Mode when you turn the
phone on. Airplane Mode will remain activated even if you
turn the phone off and on again.
While in Airplane Mode, your phone’s screen will display “Phone
Off.”
䡲
supports digital wireless transmission. Your phone and TTY device
will connect via a special cable that plugs into your phone’s
headset jack. If this cable was not provided with your TTY device,
contact your TTY device manufacturer to purchase the connector
cable.
To turn TTY Mode on or off:
1. Press
> Settings/Tools > Settings > Others > Accessibility >
TTY. (You will see an informational message.)
2. Press
3. Select On to turn TTY mode on.
– or –
Select Off to turn TTY mode off.
Note
TTY Use With Service
A TTY (teletypewriter, also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf, hard
of hearing, or who have speech or language disabilities, to
communicate by telephone.
Your phone is compatible with select TTY devices. Please check
with the manufacturer of your TTY device to ensure that it
32
2B. Settings
.
In TTY Mode, your phone will display the TTY icon if a TTY device
or an optional headset is connected to your phone.
When enabled, TTY mode may impair the audio quality of nonTTY devices connected to the headset jack.
3. Select On or Off.
911 Emergency Calling
Boost recommends that TTY users make emergency
calls by other means, including Telecommunications
Relay Services (TRS), analog cellular, and landline
communications. Wireless TTY calls to 911 may be
corrupted when received by public safety answering
points (PSAPs), rendering some communications
unintelligible. The problem encountered appears related
to TTY equipment or software used by PSAPs. This
matter has been brought to the attention of the FCC, and
the wireless industry and the PSAP community are
currently working to resolve this.
Using the Hearing Aid Device
Compatibility Function
Your phone has been tested for hearing aid device compatibility
and rated. To use this function effectively, set the hearing aid
setting to on.
1. Press
> Settings/Tools > Settings > Others > Accessibility >
Hearing Aid.
2. Read the disclaimer and press
.
On to use a hearing aid device with your phone.
Off to use your phone without a hearing aid device.
For more information about hearing aid device compatibility, see
“Using Your Phone With a Hearing Aid Device” on page 96.
䡲
䡲
Phone Setup Options
Navigation Key Shortcuts
You can use the navigation keys as shortcuts to access specific
menu items directly from standby mode. You can reassign the
default shortcuts to the menu items you choose.
> Settings/Tools > Settings > Others > 
Navigation Keys.
1. Press
2. Highlight the navigation key you wish to reassign and press
.
Settings
WARNING
3. Using the navigation key or your keypad, select a function.
4. Press ASSIGN (left softkey) to save. (For options with
submenu levels, such as Settings, you can assign submenu
options by navigating to the desired option before pressing
ASSIGN. )
2B. Settings
33
Alert Notification
Call Answer Mode
Set your phone to alert you with an audible tone when you change
service areas, once a minute during a voice call, or when a call
has been connected.
Select how to answer incoming calls on your phone whether by
pressing
or any key (except softkeys, side buttons,
, and
), or by opening the phone.
1. Press
> Settings/Tools > Settings > Others > Alerts.
2. Select Beep Each Minute, Out of Service, or Connect.
3. Select On or Off.
My Favorites
Your phone offers you the option of assigning a shortcut to a favorite
or often-used function. Pressing FAVORITES (left softkey) on the
main menu will launch your personally designated shortcut.
> Settings/Tools > Settings > Others > Call Setup >
Call Answer.
2. Select Talk Key, Any Key, or Flip Open.
Auto-Answer Mode
Set your phone to automatically pick up incoming calls.
Remember, your phone will answer calls in auto-answer mode
even if you are not present.
1. Press
1. Press
2. Select <Add Favorite>.
2. Highlight an option and press
> FAVORITES (left softkey) to display the My
Favorites list.
3. Using the navigation key or your keypad, select functions to
be assigned to the My Favorites list.
4. Press ASSIGN (left softkey) to save.
Tip
34
1. Press
While the My Favorites list is displayed, press OPTIONS (right
softkey) to customize the list or to remove assigned functions
according to your needs.
2B. Settings
> Settings/Tools > Settings > Others > Call Setup >
Auto-Answer.
.
Hands-free to answer calls automatically when the phone is
connected to an optional headset or hands-free device.
䡲 Speakerphone to answer calls automatically in
speakerphone mode.
䡲
3. Highlight the time you would like your phone to wait before
answering and press
.
Headset Mode
Note
The first time you access the Lock Phone menu, you will be
advised to change the default lock code by pressing CHANGE
(left softkey). Follow steps 3 and 4 in “Changing the Lock Code”
on page 36.
Tip
If you can’t recall your lock code, try using the last four digits of
your wireless phone number or check your lock code hint (see
“Changing the Lock Code”).
Set the sound output destination of incoming ringtone on your
phone.
> Settings/Tools > Settings > Others > 
Headset Mode.
1. Press
2. Highlight an option and press
Security Settings
Accessing the Lock Phone Menu
You must enter your lock code to view the Lock Phone menu.
1. Press
> Settings/Tools > Settings > Lock Phone.
2. Enter your lock code and press CONTINUE (left softkey).
Your Phone’s Lock Feature
Locking Your Phone
When your phone is locked, you can only receive incoming calls
or make calls to 911 and Boost Customer Care.
1. Press
> Settings/Tools > Settings > Lock Phone.
2. Enter your lock code and press CONTINUE (left softkey).
3. Select Lock Now.
Settings
.
䡲 Normal to output incoming ringtone sound through headset
and speaker.
䡲 Headset Only to output the incoming ringtone sound only
through headset.
Unlocking Your Phone
1. From standby mode, press UNLOCK (left softkey).
2. Enter your lock code and press CONTINUE (left softkey).
2B. Settings
35
Changing the Lock Code
> Settings/Tools > Settings > Lock Phone or 
Reset/Delete.
1. Press
2. Enter your lock code and press CONTINUE (left softkey).
3. Select Change Lock Code.
4. Enter your new lock code, and then press CONTINUE (left
softkey).
5. Re-enter your new lock code, and then press SAVE (left
softkey).
Each time you change the lock code, you will be prompted
whether to create a lock code hint. Press YES (left softkey) or NO
(right softkey) when prompted.
To display or edit the lock code hint:
䊳
Press
> Settings/Tools > Settings > Lock Phone > 
Lock Code Hint.
2. Enter your lock code and press CONTINUE (left softkey).
3. Select Delete Stuff.
4. Highlight an option and press
.
Text Messages to delete all text messages.
䡲 Call Logs to delete all call history from the phone.
䡲 Browser Cookies and Cache to delete all Web cookies and all
Web cache memory saved in the phone.
䡲 Download Stuff to delete all data downloaded to your phone.
䡲 Contacts to delete all of your Contacts including speed dial
numbers saved in your Contacts.
䡲 Voice Memo to delete all voice data and call memos saved
in the phone.
䡲 My Album to delete all pictures stored in My Album.
䡲 All Stuff to delete everything in all the above categories.
䡲
5. Read the message and press DELETE (left softkey).
Deleting Phone Content
Resetting Your Phone and Phone Content
You can quickly and easily delete all the content that you have
created or stored in your phone.
This option lets you clear different types of personal information
stored on your phone, reset your phone to factory settings, or
both.
1. Press
36
> Settings/Tools > Settings > Reset/Delete.
2B. Settings
1. Press
> Settings/Tools > Settings > Reset/Delete.
2. Enter your lock code and press CONTINUE (left softkey).
Disabling Data Services
3. Highlight an option and press
You can disable data services again without turning off your
phone; however, you will not have access to all data services,
including Web and messaging. Disabling data services will avoid
any charges associated with these services. While signed out, you
can still place or receive phone calls, check voicemail, and use
other voice services.
.
䡲 Reset Settings to restore all the factory defaults, including
ringtone types and display settings. Contacts, History,
Calendar, and Messages are not affected.
䡲 Reset Phone to reset all settings and erase all data on your
phone.
䡲 Reset Media Mail to reset your authentication ID for your
Media Mail account.
4. Read the message and press the left softkey 
(RESET SETTINGS, RESET PHONE, or RESET MEDIA MAIL ).
Security Features for Data Services
To disable data services:
1. Press
> Settings/Tools > Settings > Others > Data > 
Data On.
2. Read the disclaimer and press DISABLE (right softkey) to sign
out.
Enabling Data Services
Settings
Although data services are disabled on your phone by default, you
may enable them at any time.
To enable data services:
1. Press
> Settings/Tools > Settings > Others > Data > 
Data Off.
2. Read the message and press the left softkey to sign in.
2B. Settings
37
2C. History
Each entry contains the phone number (if available) and Contacts
entry name (if the number is in your Contacts). Duplicate calls
(calls from the same number) may appear only once on the list.
1. Press
> History.
2. Highlight an entry and press
⽧
Viewing History (page 38)
⽧
History Thread (page 39)
⽧
History Details (page 39)
⽧
History Options (page 39)
⽧
Making a Call From History (page 40)
⽧
Saving a Number From History (page 40)
⽧
Making a New Group Entry From History (page 40)
⽧
Deleting History (page 41)
Viewing History
History is a list of the last 60 phone numbers (or Contacts entries)
for voice calls you placed, accepted, or missed. History makes
redialing fast and easy. It is continually updated as new numbers
or entries are added to the beginning of the list and the oldest
entries are removed from the bottom of the list.
38
2C. History
Shortcut
Note
.
You can also press TALK from standby mode to display
your recent calls.
History records only calls that occur while the phone is turned on.
If a call is received while your phone is turned off, it will not be
included in history.
If you return a call from the voicemail menu, it will not be
included in your phone’s history.
History Icons
You can determine if an entry was an incoming, outgoing, or
missed call from the icons shown below.
– Incoming Call
– Outgoing Call
– Missed Call
The History thread screen shows all history for a selected entry.
To display a History thread:
1. Press
Tip
History Options
> History.
2. Highlight an entry and press
.
Text messages are included in the History thread.
History Details
To display History details:
1. Press
is also displayed according to the type of call. (See “History
Options” on page 39.)
To make a call from the History details screen, press
.
History
History Thread
> History.
2. Highlight an entry from the list and press
.
The History thread is displayed.
3. Highlight an entry and press
.
The History details screen shows the number type (Mobile, Home,
etc.), phone number, the caller’s name (if the number is already in
your Contacts), and date and time of the call. An onscreen menu
You may see several menu items on the onscreen menu. Press
OPTIONS (right softkey) for additional options.
䢇 Call to call the selected entry.
䢇 Send Message to send a message to the selected entry.
䢇 New Group to create a new Group entry.
䢇 Contact Details to display information about the entry if it has
already been saved in your Contacts.
䢇 Save Contact to save a phone number. (See “Saving a Number
From History.”)
䢇 Delete to delete the entry.
䢇 Delete All to delete all History entries. (See “Deleting History”
on page 41.)
䢇 Prepend to add numbers to the beginning of the selected
number.
2C. History
39
Making a Call From History
1. Press
> History.
2. Highlight an entry and press
.
You cannot make calls from History entries identified as 
No Caller ID, Private (Restricted ID), or Unavailable ID.
Note
If Existing Entry was selected, select an existing entry to
which you want to save the number, and then highlight a
number type and press
.
Saving a Number From History
5. Press DONE (left softkey) to save the entry.
Making a New Group Entry From
History
You can make and save a new group entry from History.
> History > OPTIONS (right softkey) > 
1. Press
Your phone can store up to 300 Contacts entries, and each
Contacts entry can store up to a total of seven phone numbers.
1. Press
> History.
2. Highlight a History entry and press OPTIONS (right softkey) >
Save Contact.
3. Select New Entry or Existing Entry.
4. If New Entry was selected, select a number type, and then
enter the new entry name.
– or –
40
2C. History
New Group.
2. Read the message and press START (left softkey).
3. Select the check box for each member you wish to add and
press CONTINUE (left softkey).
Tip
Press OPTIONS (right softkey ) > Enter New Address or
Contacts to enter a new address or a phone number or to select
an entry from your Contacts.
4. Enter a group name and press
> SAVE (left softkey).
Deleting History
1. Press
History
You can delete individual or all entries in your History.
> History.
2. Highlight an entry you wish to delete and press OPTIONS
(right softkey) > Delete.
Tip
Select Delete All to delete all entries.
3. If you are certain you want to delete one or all entries from
History, press DELETE (left softkey).
2C. History
41
About Contacts
2D. Contacts
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
42
About Contacts (page 42)
Displaying Contacts Entries (page 42)
Displaying Contacts Details (page 43)
Adding a New Contacts Entry (page 43)
Editing a Contacts Entry (page 43)
Creating a Group (page 43)
Editing Groups (page 44)
Finding Contacts Entries (page 45)
Using Contacts Information in Other Applications (page 45)
Assigning Speed Dial Numbers (page 46)
Selecting a Ringtone Type for an Entry (page 46)
Assigning a Picture to an Entry (page 47)
Secret Contacts Entries (page 47)
My Name Card (page 47)
Dialing Services (page 48)
2D. Contacts
Your phone can store up to 300 Contacts entries. Each entry can
contain up to seven phone numbers, three email addresses, and
one Web address. You can also add Contacts entries to a Group,
allowing you to send the same text message or media mail to up
to 25 Contacts entries at one time.
Tip
Some service numbers are saved in Contacts by default.
Displaying Contacts Entries
1. From standby mode, press CONTACTS (right softkey).
2. Highlight a name to show that entry’s main phone number,
or highlight a group to show how many members it has.
Viewing History From Contacts
You can view the history of a selected Contacts entry from the
Contacts list.
䊳
Highlight an entry and press OPTIONS (right softkey) > 
Contact History.
Displaying Contacts Details
After you have saved the number, the new Contacts entry is
displayed.
1. From the Contacts list, highlight an entry and press
. Menu options for that
field will appear, if applicable.
Note
If you select a group in step 1, entries or phone numbers
belonging to the group are displayed.
Adding a New Contacts Entry
Tip
ICE – In Case of Emergency
To make it easier for emergency personnel to identify important
contacts, you can list your local emergency contacts under “ICE”
in your phone’s Contacts list. For example, if your mother is your
primary emergency contact, list her as “ICE–Mom” in your
Contacts list. To list more than one emergency contact, use
“ICE1–___,” “ICE2–___,” etc.
Editing a Contacts Entry
1. From standby mode, press CONTACTS (right softkey) > 
Add New... > New Contact.
Contacts
2. Highlight any data field and press
.
1. From the Contacts list, highlight the entry you want to edit
and press OPTIONS (right softkey) > Edit Contact.
2. Enter a name for the new entry and press the navigation key
down.
2. Select the field you wish to edit, and then add or edit the
information and press
3. Enter the phone number for the entry and press
.
.
3. Press DONE (left softkey).
4. Highlight a number type for the entry (Mobile, Home, Work,
Pager, Fax, or Other ) and press
.
Creating a Group
5. Add other information (email address, URL, street address,
etc.).
6. Press DONE (left softkey).
You can create a group by assigning Contacts entries as members
and then naming the new group.
2D. Contacts
43
1. From standby mode, press CONTACTS (right softkey) > 
3. Change the group name or the group icon and press
Add New... > New Group.
.
4. Press SAVE (left softkey).
2. Read the message and press START (left softkey).
3. Highlight an entry you want to add to a group and press
A check mark will appear in the box next to the selected
entry.
4. When you have selected all the entries you want to add,
press CONTINUE (left softkey).
Tip
Press OPTIONS (right softkey) > Enter New Address or 
Recent History to enter a new phone number or address or to
select an entry from your history.
5. Enter a name for the new group and press
.
䡲 To change the input text mode, press TEXT MODE... (right
softkey) with the group name field highlighted.
6. Press SAVE (left softkey).
.
Adding Members to a Group
1. From the Contacts list, highlight the group to which you want to
add members.
2. Press OPTIONS (right softkey) > Edit Group > Add More.
3. Read the message and press START (left softkey).
4. Highlight an entry you want to add and press
.
5. Repeat step 4 to add additional members.
6. Press CONTINUE (left softkey) > SAVE (left softkey).
Removing Members From a Group
1. From the Contacts list, highlight the group from which you
want to remove members.
Editing Groups
2. Press OPTIONS (right softkey) > Edit Group.
3. Highlight a member and press OPTIONS (right softkey) >
1. From the Contacts list, highlight the group you want to edit.
2. Press OPTIONS (right softkey) > Edit Group.
44
2D. Contacts
Remove from Group > YES (left softkey).
4. Repeat step 3 to remove additional members.
5. Press SAVE (left softkey).
You can also find a group the same way as above. Press 
MENU/OK to display the members of the group.
Tip
Deleting a Contacts Entry or Group
1. From the Contacts list, highlight an entry or a group you
want to delete.
2. Press OPTIONS (right softkey) > Delete Contact or Delete Group.
Using Contacts Information in Other
Applications
3. Press DELETE (left softkey) or YES (left softkey).
You can use saved Contacts information in other applications.
Finding Contacts Entries
1. From the Contacts list, highlight an entry and press
1. From standby mode, press CONTACTS (right softkey).
numbers, email addresses, URLs, or street addresses, and
press
.
– or –
Enter the first few letters of an entry’s name. Contacts with
matching letters are listed. (The more letters you enter, the
more your search narrows.)
3. Select Share.
4. Select Text Message or Email.
After you select one or more recipients, the text entry screen for
the type of message specified will open, and the selected text will
appear in the body of the message.
3. To display an entry, highlight it and press
.
Press the navigation key left or right to display other listed
entries.
4. To dial the entry, highlight the phone number and press
.
2. Highlight the information you want to copy, such as phone
2. Scroll through all the entries.
䡲
Contacts
To copy information into a message:
.
Note
For more information about messaging, see “Text Messaging
(SMS)” on page 76 and “Email” on page 84.
2D. Contacts
45
Assigning Speed Dial Numbers
To check speed dial assignments:
䊳
Your phone can store up to 98 phone numbers in speed dial
locations. (See “Speed Dialing” on page 19.)
Selecting a Ringtone Type for an Entry
To assign a speed dial number to a new phone number:
1. Add a phone number to a new or to an existing Contacts
entry. (See “Adding a New Contacts Entry” on page 43.)
2. Highlight the phone number and press OPTIONS (right
softkey) > Set Speed Dial.
3. Highlight an available speed dial location and press
4. Press
.
to return to the Contacts menu.
To assign a speed dial number to an existing phone number:
1. From the Contacts list, highlight an entry and press
.
2. Highlight a number and press OPTIONS (right softkey) > 
Set Speed Dial.
3. Highlight an available speed dial location and press
Tip
46
To replace a current assignment, select a location and press
REPLACE (left softkey).
2D. Contacts
From the Contacts list, press OPTIONS (right softkey) >
Settings > Speed Numbers.
.
Assign a ringtone type to a Contacts entry so that you can identify
the caller by the ringtone type. (See “Ringtone Settings” on
page 28.)
1. From the Contacts list, highlight an entry and press
.
2. Select Set Ringtones.
3. Select Incoming Calls, Text Message, or Media Mail.
4. Select Change.
5. Highlight a ringtone category and press
.
6. Highlight a ringtone and press
.
Tip
If you select Downloaded > Get Stuff in step 5, you can
purchase and download new ringtones right from your phone.
For details, see “Getting New Ringtones” on page 29 and
“Downloading Games, Ringtones, and More” on page 86.
Assigning a Picture to an Entry
To hide or show secret entries:
1. From the Contacts list, press OPTIONS (right softkey) >
Settings > Hide Secret or Show Secret.
Assign a picture to display each time a certain contact calls you.
From the Contacts list, highlight an entry and press
Highlight the
icon and press
Select Choose Photo.
softkey).
Tip
Select a photo category, and then select an image.
Confirm the image on the preview screen, and then press
.
Secret Contacts Entries
When you make an entry secret and hide it, that entry is not
displayed in your Contacts. In History, a telephone number is
displayed but the Contacts entry’s name is not.
To make an entry secret:
䊳
.
.
From the Contacts list, highlight an entry and press 
OPTIONS (right softkey) > Set as Secret > On.
If you can’t recall your lock code, try using the last four digits of
your wireless phone number.
My Name Card
In My Name Card, you can edit your contact information to display
when you need, as well as send or exchange it via Bluetooth.
To display your name card:
䊳
From standby mode, press CONTACTS (right softkey) >
OPTIONS (right softkey) > Settings > My Name Card.
To edit your name card:
1. From the My Name Card screen, press OPTIONS (right
softkey) > Edit.
2. Highlight each field you want to edit and press
.
2D. Contacts
47
Contacts
1.
2.
3.
4.
5.
2. Enter the four-digit lock code, and then press CONTINUE (left
3. Edit the information. When finished, press DONE (left
softkey).
䊳
To send or exchange your name card via Bluetooth:
1. Make the Bluetooth connection with the other device. (See
section 2H, “Bluetooth,” on page 68.)
2. From the My Name Card screen, select OPTIONS (right
softkey) > Send Name Card or Exchange Name Cards.
3. Highlight a device and press
.
Dialing Services
Your Contacts list is preprogrammed with contact numbers for
various services.
To dial a service from your Contacts:
1. Press CONTACTS (right softkey) > OPTIONS (right softkey) >
Settings > Services.
2. Highlight Call Balance (Balance Info.), Call Care (Boost
Customer Care), Directory Assistance (411), or Operator, 
Call Re-Boost, Voicemail, or Emergency and then press
.
48
2D. Contacts
To dial a main service from standby mode using your keypad:
Dial the appropriate service number:
Balance Info. – #225 (#BAL)
䡲 Boost Customer Care – #611
䡲 Directory Assistance – 411
䡲 Operator – 0
䡲
2E. Calendar and Tools
3. Enter a description and press
.
4. Select a category for the event (Appointment, Meeting, etc.)
by highlighting the category field and pressing
.
5. Select a priority for the event by highlighting the priority field
and pressing
Calendar (page 49)
⽧
Alarm (page 51)
⽧
Calculator (page 52)
⽧
World Clock (page 53)
⽧
Countdown Timer (page 53)
⽧
Stopwatch (page 53)
Calendar
time field and pressing
Your Calendar helps organize your time and reminds you of up to
100 important events.
1. Press
> Settings/Tools > Tools > Calendar.
2. Highlight a day to which you would like to add a schedule
event and press OPTIONS (right softkey) > Add Schedule.
.
7. Enter a location for the event by highlighting the location field
and pressing EDIT (left softkey). Press
finished.
when you have
8. Select a ringtone type for the alarm by highlighting the
ringtone field and pressing
Downloaded > Get Stuff.
. To download ringers, select
9. Select an alarm time by highlighting the alarm time field and
pressing
Adding an Event to the Calendar
.
6. Select a start and end time for the event by highlighting the
.
10. Select a repeat status for the alarm by highlighting the
repeat field and pressing
.
If you chose Specific Period, set a start and end date for the
repeat and press
.
䡲 If you chose Weekly, select the check box for each day of
week you wish to set and press DONE (left softkey).
䡲
11. Press SAVE (left softkey).
2E. Calendar and Tools
49
Calendar/Tools
⽧
Tip
8. Select a status for the item by highlighting the status field
To change the calendar display views, press the left softkey
repeatedly to toggle between MONTHLY and WEEKLY views.
and pressing
Needs Action.
On the weekly view, press the navigation key up or down to
display the previous week or the next week, respectively.
Press OPTIONS (right softkey) > Settings > Holiday/Weekday
to enter holidays and weekdays.
Adding a To Do List Item to the Calendar
Your phone can store and manage up to 40 To Do list items.
1. Press
> Settings/Tools > Tools > Calendar.
2. Highlight a day to which you would like to add a To Do list
item and press OPTIONS (right softkey).
3. Press the navigation key right and select Add To Do.
4. Enter a description and press
9. Press SAVE (left softkey).
Note
If you have scheduled events on the Calendar, your phone alerts
you by a ringing or vibrating alarm and displays a summary of the
scheduled events.
To respond to the alarm:
䢇
5. Select a category for the item (Appointment, Meeting, etc.)
6. Select a priority for the item by highlighting the priority field
and pressing
.
7. Select a time and date for the item by highlighting the time
and date field and pressing
50
2E. Calendar and Tools
.
Press SNOOZE (left softkey) to stop the alarm and start snooze
mode.
Tip
.
To Do List items cannot be set to recur.
Calendar Alerts
.
by highlighting the category field and pressing
. When you add an item, set it to 
䢇
䢇
To change the alarm settings, press MENU/OK > 
Settings/Tools > Tools > Calendar > OPTIONS (right softkey) >
Settings > Alarm to set the ringtone length and snooze options.
Press DISMISS (right softkey) to clear the alarm.
On the notification screen, the description you have entered for
that event is displayed. If certain information (such as an email
address, street address, phone number, or URL) is highlighted
in the description, press
to display the related option
menus. (See page 23.)
䡲
If the description includes multiple items of information as
described above, press the navigation key up or down to
highlight a specific item.
Viewing Events
Tip
– or –
Press OPTIONS (right softkey) > Schedule List or To Do List.
3. Highlight an event and press OPTIONS (right softkey) > Delete.
4. Highlight an option and press
.
This to delete the highlighted event.
䡲 Select to delete multiple events.
䡲 All on This List to delete all events on the list.
䡲 Completed To Do to delete completed To Do List items.
䡲
Days with scheduled events are indicated by small colored
rectangles just below the date. A rectangle’s color depends on
the repeat status for an event.
1. Press
> Settings/Tools > Tools > Calendar.
2. Highlight the day for which you would like to view events and
press
. The day’s event list is displayed.
– or –
Press OPTIONS (right softkey) > Schedule List or 
To Do List.
5. Press YES (left softkey).
To delete old or all events:
䊳
Press
> Settings/Tools > Tools > Calendar > OPTIONS
(right softkey) > Delete Memory > Delete Old or Delete All > YES
(left softkey).
3. Highlight an event and press
Deleting Events
1. Press
> Settings/Tools > Tools > Calendar.
2. Highlight the day from which you would like to delete an
event and press
.
Alarm
Calendar/Tools
. The event’s details are
displayed. You can edit the event on this screen.
Your phone comes with a built-in alarm that has multiple alarm
capabilities.
1. Press
> Settings/Tools > Tools > Alarm.
2. Highlight an alarm number and press
.
2E. Calendar and Tools
51
3. Enter a description for the alarm by highlighting the
description field and pressing
time field and pressing
4. Select a time for the alarm by highlighting the time field and
pressing
11. Select a snooze time for the alarm by highlighting the snooze
.
.
Tip
5. Select a repeat status for the alarm by highlighting the
repeat field and pressing
6. Turn the alarm on or off by highlighting the alarm field and
pressing
.
Highlight On or Off and press
Press ON or OFF (left softkey) to toggle the alarm on and off.
In steps 4 and 9, use your keypad or navigation key (up or down
to change value, left or right to move underscore) to set the
alarm time.
.
See “To respond to the alarm:” on page 50 for various ways of
responding to the alarm.
.
䡲
.
12. Press SAVE (left softkey).
7. Select a ringtone option for the alarm between Downloaded,
Preloaded Ringtones, and No Ringtone by highlighting the
ringtone field and pressing
.
If you select Downloaded or Preloaded Ringtones, highlight a
ringtone type and press
.
8. Select a volume level for the alarm by highlighting the
volume field and pressing
.
.
10. Select a snooze interval minutes for the alarm by highlighting
the snooze interval field and pressing
Your phone comes with a built-in calculator.
1. Press
.
Press the appropriate key for an arithmetic option
(
).
䡲 Press the left softkey to enter a decimal point.
䡲 Press the right softkey to clear all numbers.
䡲
3. Press
52
2E. Calendar and Tools
> Settings/Tools > Tools > Calculator.
2. Enter numbers using your keypad.
9. Select a ringtone length for the alarm by highlighting the
ringtone length field and pressing
Calculator
for the total.
World Clock
Time to enter the length of the countdown with four digits.
(For example, to set the timer to 20 minutes, enter “0020”
using your keypad.)
䡲 Alarm to set the countdown alarm to on or off.
䡲
To view the time in different locations:
> Settings/Tools > Tools > World Clock.
4. Press SAVE (left softkey).
2. Press the navigation key left or right to scroll through
different time zones.
Note
Press ON or OFF (left softkey) to toggle the countdown alarm on
and off.
Press SUMMER (left softkey) or STANDARD (right softkey) to
change between daylight saving and standard time.
This feature allows you to use your phone as a countdown timer
to alert you when a specified period of time has elapsed. You can
set up to five timers.
> Settings/Tools > Tools > Countdown.
2. Highlight a countdown timer number and press
3. Highlight a setting and press
Press SETTINGS (right softkey) to set ringtone length and
snooze options.
See “To respond to the alarm:” on page 50 for various ways of
responding to the alarm.
Countdown Timer
1. Press
Tip
.
.
䡲 Description to enter a description of the countdown.
Stopwatch
1.
2.
3.
4.
5.
6.
Press
> Settings/Tools > Tools > Stopwatch.
Press MODE (left softkey) to select split timing or lap timing.
Press START (right softkey) to start the stopwatch.
Press SPLIT or LAP (left softkey) to record the time.
Press STOP (right softkey) to stop timing.
Press RESET (left softkey) to reset the stopwatch to zero.
2E. Calendar and Tools
53
Calendar/Tools
1. Press
2F. Voice Services
⽧
Automatic Speech Recognition (ASR) (page 54)
⽧
Managing Voice Services (page 57)
Automatic Speech Recognition (ASR)
You can use your phone’s built-in automatic speech recognition
(ASR) software to dial a phone number or to launch phone
functions. All you have to do is to talk into the phone, and ASR will
recognize your voice and complete tasks by itself.
Press and hold
Tip
Use ASR in a quiet environment so it can accurately recognize
your commands.
During ASR operation, press HELP (left softkey) to get
instructions for using the software.
Activating ASR
䊳
Available ASR commands include:
Call <Name or #> to call an entry in your Contacts list or a
spoken phone number. (See page 54 for details.)
䢇 Send Text <Name or #> to send a text message to an entry in
your Contacts list or to a spoken phone number. (See page 55
for details.)
䢇 Lookup <Name> to display the detail screen of an entry in your
Contacts list. (See page 55 for details.)
䢇 Go To <Menu> to jump directly to menu items or applications.
(See page 55 for details.)
䢇 Check <Item> to check your phone’s status. (See page 55 for
details.)
䢇
or
.
The screen displays “Say a command” and the phone prompts
you to say the name of the command you want to use. To
complete your task, simply follow the voice prompts.
Making a Voice Call Using ASR
1. Press and hold
or
.
2. When you hear “Say a command,” say “Call.”
54
2F. Voice Services
phone number.
4. When you hear “Which location?,” say a number type (for
example, “Mobile”).
Tip
You can skip steps 3 and 4 by saying a name and location after
“Call” without pausing (for example, “Call John Jones mobile”).
Displaying a Contacts Entry’s Information
Using ASR
1. Press and hold
or
.
2. When you hear “Say a command,” say “Lookup.”
3. When you hear “Say the name,” say a Contact entry’s name.
The phone displays the detail screen for that Contacts entry.
Note
If ASR does not recognize the name or number, it will find the
most likely matches and display a list of up to three names or
numbers. You will hear “Did you say Call…” followed by the
name or number. You can confirm by saying “Yes.” Say “No” to
change the selection.
Opening Menus Using ASR
You can jump directly to many menu items or applications by
saying “Go to” followed by a menu option.
1. Press and hold
Sending a Text Message Using ASR
1. Press and hold
or
.
2. When you hear “Say a command,” say “Send Text.”
3. When you hear “Say the name or number,” say a name or a
phone number.
4. When you hear “Which location?,” say a number type (for
example, “Mobile”). The phone displays the text entry
screen. (See page 76 for how to compose a message.)
or
.
2. When you hear “Say a command,” say “Go To.”
3. When you hear “Which shortcut?,” say an application name
(for example, “Messages”).
4. The phone opens the selected menu.
Tip
Say “More options” to display additional application names.
Checking Phone Status Using ASR
You can use ASR to obtain information about your phone:
䢇 Status (all of the following except My Phone Number)
2F. Voice Services
55
Voice Services
3. When you hear “Say the name or number,” say a name or a
䢇
䢇
䢇
䢇
䢇
To adapt the system to your voice:
Time
Signal Strength
Network
Battery
My Phone Number
1. Press and hold
1. Press and hold
.
3. Press START (left softkey) and repeat each word, phrase, or
telephone number you hear.
or
.
2. When you hear “Say a command,” say “Check.”
3. When you hear “Which status item?,” say a command.
To reset the adaptation:
1. Press and hold
or
.
2. Press SETTINGS (right softkey) > Adaptation > Reset Voice >
YES (left softkey).
ASR Settings
To change the ASR mode:
To change ASR confirmation:
1. Press and hold
or
2. Press SETTINGS (right softkey) > Adaptation > Adapt Voice.
or
.
2. Press SETTINGS (right softkey) > Confirmation.
3. Highlight an option and press
.
䡲 Automatic to ask for confirmation only when the system is
not sure what you said.
䡲 Always Confirm to always ask for confirmation.
䡲 Never Confirm to never ask for confirmation.
1. Press and hold
or
.
2. Press SETTINGS (right softkey) > Audio Modes.
3. Highlight an option and press
.
Expert Mode to sound a beep only.
䡲 Prompt Mode to prompt for required information.
䡲 Readout Mode to prompt for required information and to
read the text displayed on the main screen.
䡲
To change the ASR dialing region:
1. Press and hold
56
2F. Voice Services
or
.
Recording Memos
3. Highlight an option and press
To record an audio memo:
.
䡲 North America to recognize only numbers valid in North
America.
䡲 Other to recognize any number regardless of location.
To display the ASR software version:
1. Press and hold
or
.
2. Press SETTINGS (right softkey) > About.
Managing Voice Services
Use your phone’s Voice Services to record audio memos to remind
you of important events, phone numbers, or grocery list items, and
to record call memos of the other party’s voice during a phone call.
Note
Please make sure to secure permission prior to recording the
other party’s voice during a call.
You can store up to 1900 memos on your phone.
Each memo can be up to three minutes long.
Voice Services
2. Press SETTINGS (right softkey) > Dialing Region.
> Settings/Tools > Tools > Voice Services > 
Voice Memo > Record.
1. Press
2. Start recording after the beep.
To stop recording:
䊳
Press
,
,
, or STOP (left softkey).
To record a call memo:
1. During a call, press OPTIONS (right softkey) > Voice Memo.
2. Start recording after the beep.
To stop recording:
䊳
Press
,
, or STOP (left softkey). (Recording will also
stop when the other party disconnects.)
Playing Recorded Memos
> Settings/Tools > Tools > Voice Services > 
Voice Memo > List.
1. Press
2F. Voice Services
57
2. Highlight the memo you want to play and press
.
– or –
Press OPTIONS (right softkey) > Play > All to play all memos
continuously.
To play multiple memos:
> Settings/Tools > Tools > Voice Services > 
Voice Memo > List.
1. Press
2. Press OPTIONS (right softkey) > Play > Multiple and select
memos you want to play.
3. Press PLAY (left softkey).
Note
Press SLOW (left softkey) or FAST (right softkey) to change the
playing speed. Press the navigation key left or right to play the
previous or next memo.
Managing Recorded Memos
> Settings/Tools > Tools > Voice Services > 
Voice Memo > List.
1. Press
2. Highlight the memo you want to manage and press OPTIONS
(right softkey).
3. Highlight an option and press
.
Edit Title to edit the title of a memo.
䡲 Properties to display information about a memo.
䡲 Type Filter to list memos by the type order as audio memo,
call memo, or all memos.
䡲 Sort by to sort memos by the recorded time, file name or
size in ascending or descending order.
䡲
Deleting Recorded Memos
> Settings/Tools > Tools > Voice Services > 
Voice Memo > List.
1. Press
2. Highlight the memo you want to delete and press OPTIONS
(right softkey) > Delete > This or All > YES (left softkey).
58
2F. Voice Services
To delete multiple memos:
> Settings/Tools > Tools > Voice Services > 
Voice Memo > List.
Voice Services
1. Press
2. Press OPTIONS (right softkey) > Delete > Multiple and select
memos you want to delete.
3. Press DELETE (left softkey) > YES (left softkey).
2F. Voice Services
59
2. Using the phone’s main screen as a viewfinder, aim the
2G. Camera
⽧
Taking Pictures (page 60)
⽧
Storing Pictures (page 64)
⽧
Sending Media Mail (page 65)
⽧
Viewing Media Mail (page 67)
Taking Pictures
Taking pictures with your phone’s built-in camera is as simple as
choosing a subject, pointing the lens, and pressing a button.
1. To activate camera mode, press and hold
(the camera
button located on the left side of your phone). (Additional
camera options are available. See “Camera Mode Options”
on page 61 for more information.)
Tip
To activate camera mode, you can also press MENU/OK >
Pictures > Camera.
60
2G. Camera
camera lens at your subject.
3. Press
,
, or CAPTURE (left softkey), until the shutter
sounds. The picture will automatically be saved in the My
Album folder. (See “Storing Pictures” on page 64.)
䡲 To return to camera mode to take another picture, press
or
.
4. Press OPTIONS (right softkey) for more options.
Take Picture to return to camera mode to take another
picture.
䡲 Send Media to send your picture in a message. (See
“Sending Pictures From the My Album Folder” on page 65.)
䡲 Print to print the picture.
䡲 Post to Services to access available services such as
MySpace, Facebook, and Flickr. Select Update to display
the latest services.
䡲 Review Media to go to the My Album folder to review your
saved pictures.
䡲 Set as to assign the picture. (See “Assigning Pictures”
below.)
䡲 Delete to delete the picture you just took.
䡲 Details/Edit to edit your picture or display details relating to
your pictures.
䡲
Camera Mode Options
Assign a picture as a wallpaper or as a picture ID.
Press OPTIONS (right softkey) in camera mode to display
additional camera options:
䢇 Picture Mode to select a picture mode from Normal, 
Beach/Snow, Scenery, Mirror Image, or Night/Dark.
䢇 Zoom to zoom in and out on a subject. (See “Zoom” on
page 62.)
䢇 Self-Timer to activate the camera’s timer. (See “Self-timer” on
page 62.)
䢇 Fun Tools to select an option from the following:
䡲 Multiple Shots to take multiple shots. (See “Multiple Shots.”)
䡲 Fun Frames to select your favorite fun picture frame to
decorate your picture.
1. Take a picture. (See steps 1–3 on page 60.)
2. With the picture displayed, press OPTIONS (right softkey) >
Set as and select an option.
Picture ID to assign the picture to one or all of Contacts
entries as well as to unsaved phone numbers, or to private
and unknown phone numbers. See “Selecting a Picture ID”
on page 26.
䡲 Wallpaper to assign the picture as a wallpaper. Press
to assign the picture.
䡲
Tip
You can also assign pictures from the My Album menu. See “My
Album Folder Options” on page 64.
You can view pictures assigned as picture IDs or wallpapers by
pressing MENU/OK > Settings/Tools > Tools > 
Assigned Media.
Note
You cannot use Fun Frames feature when resolution is set to
1.3M. (See “Camera Settings” on page 63.)
Color Tone to select from a wide variety of color tones for
the picture.
Image Controls to select an option from Brightness, 
White Balance, Sharpness, or Contrast.
CameraSettings to select Resolution, Quality, and other settings.
(See “Camera Settings” on page 63.)
䡲
䢇
䢇
2G. Camera
61
Camera
Assigning Pictures
䢇
䢇
䢇
Review Media to go to the My Album folder to review your
saved pictures.
Key Guidance to show keypad shortcuts in camera mode.
User Settings to provide convenient access to your favorite
settings. (See “Saving Your Settings” on page 63.)
Multiple Shots
This feature allows you to take three, six, or nine shots in a
continuous sequence. When you take multiple shots,
will be
displayed in the viewfinder.
1. From camera mode, press OPTIONS (right softkey) > 
Fun Tools > Multiple Shots.
Self-timer
1. From camera mode, press OPTIONS (right softkey) > 
Note
When taking multiple shots, the resolution is temporarily set to
Low-240x320.
Self-Timer.
2. Highlight a delay time (10 Seconds or 5 Seconds ) and press
2. Highlight an option (3 Shots, 6 Shots, or 9 Shots ) and press
.
.
3. Press
or START (left softkey) when you are ready to start
the timer. (You will see
at the top of the screen and your
phone will beep during the countdown.)
4. Get ready for the picture. (When the timer is down to three
seconds, the self-timer icon will turn red and the beep sound
will change.)
To cancel the self-timer after it has started:
䊳
Press CANCEL (right softkey) or
.
3. Highlight the duration of the interval between shots (Normal
or Fast ) and press
.
4. Press
,
, or CAPTURE (left softkey), to take the
pictures. (The MULTIPLE SHOTS folder will display up to nine
miniature thumbnail pictures per screen.)
Zoom
This feature allows you to zoom in on an object when you take a
picture. You can adjust the zoom from 1x to 12x.
1. From camera mode, press the navigation key right to zoom
in or left to zoom out.
62
2G. Camera
,
, or CAPTURE (left softkey) to take a picture.
Camera Settings
1. From camera mode, press OPTIONS (right softkey) >
CameraSettings.
2. Highlight an option and press
.
䡲 Resolution to select a picture’s file size 
(1.3M-960x1280, Med-480x640, or Low-240x320 ).
䡲 Quality to select the picture quality setting (Fine, Normal, or
Economy ).
䡲 Shutter Sound to select a shutter sound (Default, 
“Say Cheese,” “Ready,” or Off ).
䡲 Status Bar to display or hide status indicators and softkeys.
These can be displayed or hidden by pressing the
navigation key up or down.
䡲 Save Setting to select Auto or Manual saving of pictures.
2. Highlight an unassigned number and press
> YES (left
softkey). (The Default keeps the original settings.)
3. Enter a title and press
.
4. Confirm the settings and press
.
To retrieve your settings:
1. From camera mode, press OPTIONS (right softkey) > 
User Settings.
2. Highlight a customized settings group and press
> YES
(left softkey).
Note
Camera
2. Press
To replace settings, highlight a customized settings group and
press OPTIONS (right softkey) > Overwrite > YES (left softkey).
Saving Your Settings
You can save your favorite camera mode options as your
preferred settings.
1. Set your favorite camera mode options and press OPTIONS
(right softkey) > User Settings.
2G. Camera
63
Storing Pictures
Camera Icons
Function
Beach/Snow
Picture
Mode
Scenery
Mirror Image
Night/Dark
White
Balance
Details
Use this setting in bright light.
Use this setting for scenery at a distance.
Use this setting to take a mirror image.
Use this setting in low light.
Sunny
Use this setting for sunny weather.
Cloudy
Use this setting for cloudy weather.
Tungsten
Fluorescent
Use this setting for incandescent lighting.
Use this setting for fluorescent lighting.
Manual
To set the white balance manually.
Brightness
Manual
To set brightness manually.
Sharpness
Manual
To set sharpness manually.
Contrast
Manual
1.3M
Resolution
Medium
Low
Self-Timer
Multiple Shots
64
Icon
2G. Camera
To set contrast manually.
For 1.3-megapixel picture resolution.
For medium picture resolution.
For low picture resolution.
Numeric countdown will appear when the
self-timer has been started.
Use this setting for multiple shots.
Your phone’s internal storage area is called the My Album folder.
From the My Album folder, you can view all the pictures you have
stored there.
To review your stored pictures in the My Album folder:
䊳
Press
> My Album.
My Album Folder Options
When you are viewing the My Album folder, press OPTIONS (right
softkey) to display the following options:
䢇 Send Media to send your picture in a message. (See “Sending
Pictures From the My Album Folder” on page 65.)
䢇 Print to print items.
䢇 Post to Services to access available services such as MySpace,
Facebook, and Flickr. Select Update to display the latest services.
䢇 Set as to select from these options:
䡲 Picture ID to assign the currently highlighted picture to one or
all of Contacts entries as well as to unsaved phone numbers,
or to private and unknown phone numbers. See “Selecting a
Picture ID” on page 26.
䢇
Note
䢇
䢇
䢇
Deleting pictures will free up memory space in your phone to
enable you to take more pictures.
Details/Edit to edit or display details relating to your pictures.
䡲 Text Caption to edit the selected picture’s caption.
䡲 Special Effects to select from Fun Frames, Color Tone, 
Fun Stamps, or Rotate.
䡲 Resize to resize the selected picture. Select Med-480x640
or Low-240x320.
䡲 Trimming to crop the selected picture.
䡲 Picture Info to display information such as the picture’s
caption, time/date, and size.
䡲 Full Screen to display the selected picture in full screen view.
Slideshow to view your pictures in slideshow mode (only
available when you save two or more pictures to the folder).
Camera Mode to activate camera mode.
Reviewing Pictures in Assigned Media Folder
The Assigned Media folder automatically stores copies of pictures
assigned as a picture ID or as a wallpaper on your phone. (See
“Assigning Pictures” on page 61.)
1. Press
> Settings/Tools > Tools > Assigned Media.
2. Use your navigation key to view and scroll through the
pictures. Press the left softkey to switch the view between
EXPAND and THUMBNAIL display.
Sending Media Mail
Once you have taken a picture, you can use the messaging
capabilities of your phone to instantly share it with family and
friends. You can send pictures to up to 25 people at a time using
their email addresses or their phone numbers.
Sending Pictures From the My Album Folder
1. Press
> My Album.
2. Highlight a picture to send and press
. (You can select
multiple pictures by highlighting each in turn and pressing
to check the picture’s box.)
3. Press OPTIONS (right softkey) > Send Media.
4. Select the recipient from the list or from the following options.
䡲
Go to Contacts to select a recipient from your Contacts.
(Qualifying Contacts entries must contain a wireless phone
number or an email address.)
2G. Camera
65
Camera
Wallpaper to assign the currently highlighted picture as a
wallpaper. Press
to assign the picture.
Delete to delete pictures. Select This, Selected, or All.
䡲
MULTIPLE (left softkey) to select multiple recipients. Press
CONTINUE (left softkey) when you have finished selecting
recipients. (You may include up to 25 recipients per
message.)
䡲 NEW ADDRESS (right softkey) to enter a recipient’s wireless
phone number or email address directly. Press CONTINUE
(left softkey) to proceed.
䡲
5. If you wish to include a text message, scroll to the Text field,
and then enter your message.
6. If you wish to include an audio message, scroll to the Audio
to
field, and then press RECORD (right softkey) >
record. (Maximum recording time is 10 seconds. If you close
the phone, the recording will stop and the data recorded
until then will be attached.)
7. To set the priority, scroll to the Priority field, and then select
High, Normal, or Low.
8. Confirm the recipients, message, audio memo, and pictures.
(You may also select additional options by pressing the right
softkey. Follow the onscreen instructions to add available
options.)
9. Press SEND (left softkey) to send the pictures.
Sending Pictures From the Messaging Menu
You can also send Media Mail from your phone’s Messaging
menu.
1. Press
> Messaging > Send Message > Media Mail.
2. Select the recipient from the list or from the following
options.
Go to Contacts to select a recipient from your Contacts.
(Qualifying Contacts entries must contain a wireless phone
number or an email address.)
䡲 MULTIPLE (left softkey) to select multiple recipients. Press
CONTINUE (left softkey) when you have finished selecting
recipients. (You may include up to 25 recipients per
message.)
䡲 NEW ADDRESS (right softkey) to enter a recipient’s wireless
phone number or email address directly. Press CONTINUE
(left softkey) to proceed.
䡲
3. Select a picture and press
> NEXT (left softkey). (You
can also choose to take a new picture.)
4. If you wish to include a text message, scroll to the Text field,
and then enter your message.
5. If you wish to include an audio message, scroll to the Audio
field, and then press RECORD (right softkey) >
66
2G. Camera
to record.
6. To set the priority, scroll to the Priority field, and then select
High, Normal, or Low.
7. Confirm the recipients, message, audio memo, and pictures.
(You may also select additional options by pressing the right
softkey. Follow the onscreen instructions to add available
options.)
8. Press SEND (left softkey) to send the pictures.
Viewing Media Mail
To reply to media mail:
1. While the message is displayed, press OPTIONS (right
softkey) > Reply with > Text Message.
2. Compose a message and press SEND (left softkey).
– or –
1. Press
> Pictures or Messaging > Media Mail.
2. Select Inbox.
3. Highlight a message to which you want to reply and press
OPTIONS (right softkey) > Reply with > Text Message.
Camera
(Maximum recording time is 10 seconds. If you close the
phone, the recording will stop and the data recorded until
then will be attached.)
4. Compose a message and press SEND (left softkey).
When you receive media mail, a notification will
automatically be displayed on your phone’s screen. Use your
softkeys to view media mail.
– or –
䊳
1. Press
> Pictures or Messaging > Media Mail.
2. Select Inbox.
3. Highlight a message and press
. (To display the
message options, press OPTIONS [right softkey].)
2G. Camera
67
Turning Bluetooth On and Off
2H. Bluetooth
By default, your phone’s Bluetooth feature is turned off. Turning
Bluetooth on enables your phone’s Bluetooth functions.
1. Press
⽧
⽧
⽧
⽧
⽧
⽧
⽧
⽧
About Bluetooth (page 68)
Turning Bluetooth On and Off (page 68)
Making Your Phone Discoverable (page 68)
Bluetooth Menu (page 69)
Pairing Bluetooth Devices (page 70)
Viewing the Trusted Devices List (page 70)
Sending Data via Bluetooth (page 71)
Printing Pictures via Bluetooth (page 72)
About Bluetooth
Bluetooth® is a short-range communications technology that
allows you to connect wirelessly to a number of Bluetooth
devices, such as headsets and hands-free car kits, and
Bluetooth-enabled handhelds, computers, printers, and wireless
phones. The Bluetooth communication range is usually up to
approximately 30 feet.
68
2H. Bluetooth
> Bluetooth > On/Off.
2. Press ON (left softkey) to enable Bluetooth. Press OFF (left
softkey) to disable Bluetooth.
Making Your Phone Discoverable
To make your phone discoverable (allowing other Bluetooth
devices to detect it), you must set your phone’s visibility to other
than Hidden.
1. Press
Note
> Bluetooth > Visibility.
The first time you access the Visibility menu, you will be advised
to enable Bluetooth by pressing ON (left softkey). On the next
screen, you can customize the device name by overwriting it and
pressing SAVE (left softkey).
2. Select Visible for 3 min or Always visible. If you select 
Always visible, your phone will be discoverable by all in-range
Bluetooth devices until you change the setting. If you select
Bluetooth Status Indicators
The following icons show your Bluetooth connection status at a
glance:
– Bluetooth feature is on.
– Your phone is visible to other Bluetooth devices.
– Your phone is connected to a Bluetooth device.
The above icons will blink while your phone is communicating
with a Bluetooth device.
Bluetooth Menu
The Bluetooth menu allows you to set up many of the
characteristics of your phone’s Bluetooth service, including:
䢇 Setting your phone’s visibility (or “discoverability”) for other
Bluetooth devices.
䢇 Adding a new Bluetooth device to your phone.
䢇 Displaying your Bluetooth trusted devices list.
䢇 Displaying your phone’s Bluetooth information.
䊳
Press
> Bluetooth to select from the following options.
On/Off to turn Bluetooth functions on or off. When On is
selected, your phone can receive requests from other
Bluetooth devices. (See page 68.)
䡲 Visibility to set your phone’s visibility (or “discoverability”)
for other Bluetooth devices.
䡲 Add New to add a new Bluetooth device.
● You can choose the device you wish to add to the
Trusted Devices list (see page 70). You must first put
the desired device into visible (or “discoverable”) mode.
If asked for a PIN code, you must enter the same PIN
code as the desired device. (See “Pairing Bluetooth
Devices” on page 70.)
䡲 Trusted Devices to display a list of your trusted Bluetooth
devices. Select Add New and follow steps 2-4 in “Pairing
Bluetooth Devices” to add a new Bluetooth device. Up to 20
devices can be listed. (See page 70.)
䡲 My Bluetooth Info to display the name, address, class, and
supported profiles of your phone. You can edit the
Bluetooth name (device name) of your phone that will
appear on other in-range Bluetooth devices, depending on
your visibility settings.
䡲
2H. Bluetooth
69
Bluetooth
Visible for 3 min, your phone will return to hidden mode after
three minutes.
Pairing Bluetooth Devices
䊳
The Bluetooth pairing process allows you to establish trusted
connections between your phone and another Bluetooth device.
When devices are paired, a passkey (PIN) is shared between
devices, allowing for fast, secure connections while bypassing the
discovery and authentication process.
1. From the Bluetooth menu, select Add New. (See “Bluetooth
Trusted Devices List Menu
Once you have created trusted devices, several options are
available from the Trusted Devices list.
Left Softkey Menus
䊳
Menu” on page 69.)
2. Select the device you wish to pair with and press
.
3. Enter the passkey of your device or the other’s and press
.
4. (Optional) Edit the device name and press SAVE (left softkey).
Note
From the Bluetooth menu, select Trusted Devices.
Due to different specifications and features of other Bluetooth
compatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible.
From the Trusted Devices list, highlight a device, and press
the left soft key menu item which appears depending on the
type of device highlighted.
䡲 CONNECT to connect to the selected Bluetooth device, if not
connected (for headsets, hands-free and other devices,
excluding computers, PDAs, phones, or printers).
䡲 TRANSFER... to send data saved on your phone to the
selected Bluetooth device (for computers, PDAs, or
phones). (See page 71.)
䡲 PRINT to print data using the selected Bluetooth-enabled
printer. (See page 72.)
Options Menu
Viewing the Trusted Devices List
This list displays a list of devices which are paired with your
device and set as trusted devices.
70
2H. Bluetooth
䊳
From the Trusted Devices list, press OPTIONS (right softkey)
to display the following options.
䡲 Add New to add a new Bluetooth device. See the description
for Add New item on “Bluetooth Menu” on page 69.
Delete to delete the selected device from the list.
Delete All to delete all devices from the list.
䡲 Auto-Accept to configure your phone’s accessibility to other
Bluetooth devices. (See “Setting Auto-Accept” on page 71.)
䡲 View/Edit Info to view or edit the information of the selected
device.
䡲 Help to display the Trusted Devices list help.
䡲
Sending Data via Bluetooth
䡲
You can configure your phone’s accessibility to other Bluetooth
devices.
1. From the Trusted Devices list, highlight a device and press
OPTIONS (right softkey) > Auto-Accept.
2. A message will appear asking whether to turn Auto-Accept
on or off. Press ON or OFF (left softkey).
ON to allow other Bluetooth devices to initiate a connection
without any confirmation.
䡲 OFF to display a confirmation screen from which you can
accept or deny a connection.
䡲
Sending Contacts
1. From the Bluetooth menu, select Trusted Devices, and select
a device (computer, PDA, or phone) from the list.
2. Press TRANSFER... (left softkey) > Send Contact.
3. Select an option:
Send All Contacts to send all the entries in your Contacts.
Select Contacts to send selected entries. After you have
selected entries by checking the box next to each entry,
press CONTINUE (left softkey).
4. Read the message and press SEND (left softkey).
䡲
䡲
Sending or Exchanging Name Cards
(For more information about Name Cards, please see page 47.)
1. From the Bluetooth menu, select Trusted Devices, and select
a device (computer, PDA, or phone) from the list.
2. Press TRANSFER... (left softkey) > Send Name Card or
Exchange Name Cards.
3. Press SEND (left softkey).
2H. Bluetooth
71
Bluetooth
Setting Auto-Accept
You can send Contacts data and Name Cards to or exchange
Name Cards with another Bluetooth device, such as a computer,
PDA, or phone.
Printing Pictures via Bluetooth
You can print out your pictures stored on your phone. (Some
Bluetooth-enabled printers may not support this feature.)
1. From the Bluetooth menu, select Trusted Devices, and select
a printer from the list.
2. Press PRINT (left softkey).
3. Select the check box for each picture you wish to print and
press CONTINUE (left softkey).
Note
You may not be able to print pictures that you cannot display on
your phone.
4. To set the print settings, highlight each element and select a
setting using your navigation key right or left.
Type: You can select the print mode from Prints or Index.
䡲 Copies: You can set the number of copies from Single,
Doubles, or Manual. When you select Manual, set the
number (up to 99 per picture) by pressing your navigation
key right or left. The number of copies will be displayed in
the field below.
䡲 Below the Copies element, you can view the miniature
thumbnails of the selected picture(s) in step 3 and the
䡲
72
2H. Bluetooth
number of copies you have selected in the Copies element
(if other than the Index print mode is selected). To confirm
the selected pictures, highlight the thumbnail field and
press the navigation key right or left.
䡲 Size: You can set the print size from 4"x6", 5"x7", or Letter.
(Print sizes may vary according to the type of printer you
have.)
䡲 Date: You can imprint the date on your pictures. Select On or
Off. (Date stamping may not be available depending on the
type of printer you have.)
䡲 Border: You can choose whether to print the pictures with
or without border. Select On or Off.
䡲 Caption: You can choose whether to print the pictures with
or without text captions such as the date captured (if
available) and serial numbers. Select On or Off.
5. When you have finished selecting the print settings, press
PRINT (left softkey), and wait for the Bluetooth connection
and printing.
6. When printing is finished, press
Note
, and then press
Before using the Bluetooth printing feature, make sure your
phone’s battery is fully charged.
.
Section 3
Service
2. Follow the system prompts to:
Create your passcode.
Record your name announcement.
䡲 Record your greeting.
䡲
3A. Service: The Basics
⽧
Voicemail (page 74)
⽧
Text Messaging (SMS) (page 76)
⽧
Caller ID (page 79)
⽧
Call Waiting (page 79)
⽧
Making a 3-Way Call (page 79)
⽧
Call Forwarding (page 80)
Note
Voicemail Notification
There are several ways your phone alerts you to a new message:
䢇 By displaying a message on the screen.
䢇 By sounding the assigned ringtone type.
䢇 By displaying
at the top of the screen.
Setting Up Your Voicemail
Your phone automatically transfers all unanswered calls to your
voicemail, even if your phone is in use or turned off. You should
set up your Voicemail and personal greeting as soon as your
phone is activated.
.
New Voicemail Message Alerts
When you receive a new voicemail, your phone alerts you and
prompts you to call your voicemail.
To call your voicemail from the notification screen:
䊳
74
3A. Service: The Basics
Voicemail Passcode
Boost strongly recommends that you create a passcode when
setting up your voicemail to protect against unauthorized access.
Without a passcode, anyone who has access to your handset is
able to access your voicemail messages.
Voicemail
1. From standby mode, press and hold
䡲
Press
.
Your phone accepts messages even when it is turned off, but
you can receive voicemail message alerts only when your phone
is turned on.
Using Another Phone to Access Messages
1. Dial your wireless phone number.
Service
Note
2. When your voicemail answers, press the star key (*).
Retrieving Your Voicemail Messages
3. Enter your passcode.
You can review your messages directly from your wireless phone
or from any other touch-tone phone. 
To dial from your wireless phone, either speed dial your voicemail
or use the menu keys.
Tip
Using One-Touch Message Access
䊳
Press and hold
box.)
. (Your phone will dial your voicemail
Using the Menu Keys on Your Phone to Access Your
Messages
1. Press
2. Press
Note
When you call into voicemail, you first hear the header
information (date, time, and sender information) for the
message. To skip directly to the message, press 4 during the
header.
Clearing the Message Icon
Normally, the message icon will go away after you have called
your voicemail and listened to your message(s). You can also clear
the message icon manually without calling in to your voicemail.
䊳
Press
> Messaging > Voicemail > Reset Indicator > YES
(left softkey).
> Messaging > Voicemail.
to listen to your messages.
You are charged for airtime minutes when you are accessing
your voicemail from your wireless phone.
3A. Service: The Basics
75
Voicemail Key Guide
Here’s a quick guide to your keypad functions while listening to
voicemail messages.

Date/Time
Send Reply
Advance
Replay
Rewind
Forward
Erase
Return Call
Save
Cancel
Help
Skip



Text Messaging (SMS)
With text messaging (SMS), you can send and receive text
messages between your phone and another messaging-ready
phone. When you receive a new message, it will automatically
display on your phone’s screen.
76
3A. Service: The Basics
In addition, text messaging includes a variety of preset messages,
such as “I can’t talk now, please send a message,” that make
composing messages fast and easy. Use your phone to customize
your own preset messages (up to 50 characters).
Text messages can be composed of up to six segments of 160
characters each, for a total of 960 characters per text message.
The current segment and total segment count is displayed at the
top of each segment. For example, (5/6) at the top of a segment
would indicate you are viewing segment five of a six-segment
message.
Note
See your service plan for applicable charges for text messaging.
Composing Text Messages
1. Press
> Messaging > Send Message > Text Message.
2. Select a recipient from the list or from the following options.
Go to Contacts to select a recipient from your Contacts.
(Qualifying Contacts entries must contain a phone number
or an email address.)
䡲 MULTIPLE (left softkey) to select multiple recipients. Press
CONTINUE (left softkey) when you have finished selecting
recipients. (You may include up to 25 recipients per
message.)
䡲
NEW ADDRESS (right softkey) to enter a recipient’s phone
number or email address directly. Press CONTINUE (left
softkey) to proceed.
3. Compose a message.
䡲
Press OPTIONS (right softkey) to select additional options.
4. Review your message and press SEND (left softkey).
To display the thread list:
䊳 Press
> Messaging > Text Messages.
You will see a thread list. Each thread has an entry’s name (if
saved in Contacts), a phone number, or an email address. You will
also see the number of unread messages, if any, for each thread.
When you highlight a thread, you will see the first few words of
the most recent message in that thread.
Accessing Text Messages
To read an SMS Text message:
䊳
When you receive a text message, your phone will display a
notification message. Use your navigation key to scroll down
and view the entire message.
To reply to a text message:
1. While the message is displayed, press REPLY (left softkey).
2. Compose a reply and press SEND (left softkey).
Threaded Messaging
Threaded messaging lets you follow a chain of text messages to
and from a particular contact.
Viewing Messages
Highlight a thread and press
to display the messages sent to
and received from a particular contact, in reverse chronological
order. Failed, pending, and draft messages are also listed.
Highlight a message to see details for that message.
3A. Service: The Basics
77
Service
䡲
Entry’s name, phone
number, or email address.
Message you received.
Me – Message you sent.
Me (Failed) – Message you did not send successfully.
䡲 Me (Pending) – Message you have not sent yet because your
phone has no network connection. The message will be sent
automatically when your phone reconnects to the network.
䡲 Me (Draft) – Message you saved as a draft. Only one draft
can be saved in each thread, and that draft appears at the
top of the thread.
䡲
Message Details
Highlight a message and press
to display the message
details and view the entire message.
You can select certain information from a text message or email
message and automatically save it or use it in a related
application. See “Simple Data Exchange” on page 23.
78
3A. Service: The Basics
Threaded Messaging Options
When you are viewing a messaging thread list, a message thread,
or a message details screen, you can choose from among the
following options. (Options will vary according to screen.)
䊳
Press
䊳
Press SEND MESSAGE (left softkey) to send a message to the
entry.
䊳
Press REPLY (left softkey) to reply to a message.
䊳
Press SEND (left softkey) to send a draft message.
䊳
Press RESEND (left softkey) to resend a failed message.
䊳
Select a message, press OPTIONS (right softkey), and select
an option.
䡲 Forward to forward the selected message.
䡲 Lock to lock the selected message.
䡲 Unlock to unlock the selected message.
Note
䡲
䡲
or
to make a call to the entry.
Text messages are automatically deleted starting with the oldest.
To save messages, lock them.
Delete to delete the selected message.
Delete All to delete all messages.
When you are on a call, Call Waiting alerts you to incoming calls
by sounding two beeps. Your phone’s screen informs you that
another call is coming in and displays the caller’s phone number
(if available).
To respond to an incoming call while you’re on a call:
䊳
Tip
Caller ID allows people to identify a caller before answering the
phone by displaying the number of the incoming call. If you do not
want your number displayed when you make a call, follow these
steps.
1. Press
.
2. Enter the number you want to call.
.
Press
. (This puts the first caller on hold and answers the
second call.)
To switch back to the first caller:
䊳
Caller ID
3. Press
Call Waiting
Press
again.
For those calls where you don’t want to be interrupted, you can
temporarily disable Call Waiting by pressing * 7 0 before
placing your call. Call Waiting is automatically reactivated once
you end the call.
Making a 3-Way Call
With 3-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be charged
for each of the two calls.
3A. Service: The Basics
79
Service
Call to dial the phone number appearing in the selected
message.
䡲 Go/Open Browser to open the URL appearing in the selected
message.
䡲 Open to dial the phone number or to open the URL
appearing in the selected message.
䡲 Save Number to save the phone number appearing in the
selected message.
䡲 Save Email to save the email address appearing in the
selected message.
䡲 Settings to display the Messaging Settings menu.
䡲
1. Enter a number and press
2. Enter the area code and phone number to which you want
.
2. Once you have established the connection, press
. (This
. (You will hear a tone to confirm the activation of
Call Forwarding.)
3. Select Contacts, Recent History, or Enter Phone#.
4. Select a number from your Contacts or Recent History, or
enter a number directly, and then press
.
5. When you’re connected to the second party, press
Call Forwarding
Call Forwarding lets you forward all your incoming calls to another
phone number – even when your phone is turned off. You can
continue to make calls from your phone when you have activated
Call Forwarding.
1. Press
80
.
3A. Service: The Basics
To deactivate Call Forwarding:
1. Press
again
or JOIN (right softkey) to begin your 3-way call.
If one of the people you called hangs up during your call, you and
the remaining caller stay connected. If you initiated the call and
are the first to hang up, all callers are disconnected.
To activate Call Forwarding:
your calls forwarded.
3. Press
puts the first caller on hold.)
2. Press
Note
.
. (You will hear a tone to confirm the deactivation.)
See your service plan for call forwarding rates, additional
charges may apply.
3B. Web and Data Services
⽧
Getting Started With Data Services (page 81)
⽧
Accessing Messages (page 84)
⽧
Downloading Games, Ringtones, and More (page 86)
⽧
Browser Menu (page 88)
⽧
Data Services FAQs (page 90)
Getting Started With Data Services
With your data service, you are ready to start enjoying the
advantages of data services. This section will help you learn the
basics of using your data services, including managing your user
name, launching a data connection, and navigating the Web with
your phone.
When you buy your phone and sign up for service, you’re
automatically assigned a user name, which is typically based on
your name and a number, followed by
“@myboostmobile.sprintpcs.com.” (For example, the third John
Smith to sign up for data services might have
jsmith003@myboostmobile.sprintpcs.com as his user name.)
When you use data services, your user name is submitted to identify you
to the Network. Your user name will be automatically programmed into
your phone. You don’t have to enter it.
Finding Your User Name
If you are not sure what your user name is, you can easily find it
on your phone.
䊳
Press
> Settings/Tools > Settings > Phone Info > 
Phone#/User ID.
Updating Your User Name
If you choose to change your user name and select a new one
online, you must then update the user name on your phone.
䊳
Press
> Settings/Tools > Settings > Others > Data > 
Update Data Profile. (To cancel, press
before completing
the update.)
3B. Web and Data Services
81
Web and Data
Your User Name
Launching a Web Connection
Press
> Web. (Your data connection starts and you see
the home page.)
While connecting, you may see an animation before the home
page appears.
䊳
Tip
To change the default launch page to the last page you viewed,
press TOOLBAR (right softkey) and select OPTIONS >
If you do not see an indicator, your phone does not have a current
data connection. To launch a connection, see “Launching a Web
Connection.”
Navigating the Web
Navigating through menus and websites during a data session is
easy once you’ve learned a few basics. Here are some tips for
getting around.
Advanced > Startup page > The last page I viewed > DONE
(left softkey).
Data Connection Status and Indicators
Your phone displays the current status of your data connection
through indicators at the top of the screen. The following symbols
are used:
You are connected to the data network. Data is being
transferred (for example, when you are opening a Web page)
and you cannot receive calls.
You are connected to the network but data is not currently being
transferred (for example, when you are viewing a Web page that
is completely open), and you can receive calls.
82
3B. Web and Data Services
Softkeys
During a data session, the bottom line of your phone’s display
screen contains one or more softkeys. These keys are shortcut
controls for navigating around the Web, and they correspond to
the softkeys directly below the phone’s display screen.
Tip
Depending on which websites you visit, the labels on the
softkeys may change to indicate their function.
To use softkeys:
䊳
Press a softkey. (If an additional pop-up menu is displayed
when you press the softkey, select the menu items using
your keypad [if they’re numbered], or by highlighting the
option and pressing
.)
Scrolling
Going Back
As with other parts of your phone’s menu, you’ll have to scroll up
and down to see everything on some websites.
To go back one page:
To scroll line by line through websites:
䊳
Press the navigation key up or down.
䊳
Press
Note
on your phone.
You can also use the BACK key for deleting text (like a
BACKSPACE key) when you are entering text.
Selecting
To select onscreen items:
䊳
Tip
Use the navigation key to highlight an item, and then press
the left softkey (or press
).
You’ll find that the left softkey is used primarily for selecting
items. This softkey is often labeled “GO.”
Going Home
To return to the home page from any other page:
䊳
Press and hold
Web and Data
Once you’ve learned how to use softkeys and scroll, you can start
navigating the Web.
.
– or –
Press TOOLBAR (right softkey) > MY HOMEPAGE.
If the items on a page are numbered, you can use your keypad
(number keys) to select an item.
Links, which are displayed as underlined text, allow you to jump
to Web pages, select special functions, or even place phone calls.
To select links:
䊳
Highlight the link and press the appropriate softkey.
3B. Web and Data Services
83
Accessing Messages
5. Follow the setup wizard instructions to enter the required
You can send and receive email messages or instant messages
right from your phone. Messaging allows you to stay connected
24 hours a day anywhere on the Network.
Note
and send messages and manage your email account.
Your phone’s Email application lets you access and manage
multiple email accounts simultaneously in one convenient location.
Getting Started With Email
> Messaging > Email. (The Email setup wizard will
start.)
2. Press
to continue.
3. Select an email provider (such as AOL® Mail, AIM® Mail,
Windows® Live, Yahoo!®, or Gmail®).
– or –
Select More... to choose from additional options. There are
many available email options listed, or you may add your
own IMAP or POP email accounts.
4. Press ACCEPT (right softkey) if you are prompted to accept
any license agreements or disclaimers.
84
The information required or procedures to sign in will vary
depending on the email provider you are accessing.
6. Follow the onscreen instructions to read, reply to, compose,
Email
1. Press
sign-up information, such as your email address and
password. Press
or CONTINUE (right softkey) to sign in.
3B. Web and Data Services
Note
Services may be available for an additional subscription fee. Visit
Boostmobile.com or call Boost Customer Care for additional
information.
Accessing Email
Using Email on your phone is even easier than using multiple email
accounts on your computer. Launch the application for instant
access to all your accounts. (The procedures below are subject to
the application updates.)
1. Once you have set up your Email, press
> Messaging >
Email to launch the application. (You will see your default
account inbox.)
– or –
From an Email New Message notice (if you have enabled Mail
Push), select VIEW (left softkey) to go to your inbox.
The first time you access your Email, you will have the option of
completing a Help program. This series of screens demonstrate
the application’s navigation and available tools.
Mail Push allows your phone to automatically retrieve new email
messages without having to select the Check Mail option. When
you enable Mail Push by checking the Auto-receive and Tell me I
have mail options in the Preferences settings, you will receive an
onscreen notice of new email messages. These notices may be
charged as Text Messages. Please consult your service plan for
details.
2. Use your keypad and navigation keys to read, manage, and
reply to your email messages.
䡲 Press Menu (right softkey) to select messaging options,
such as Delete, Compose, Reply, Check Mail, or Settings.
䡲 Press Menu (right softkey) > Check Mail to manually check
for new messages.
䡲 To view a different email account, use your navigation key
to select the drop-down menu next to the Inbox tab at the
top of the screen, and then select an account. You can also
navigate to the Home tab at the top of the screen and
select an available account from there.
䡲 To add a new account, use your navigation key to select the
Home tab at the top of the screen, and then select 
Add Account. Follow the instructions in “Getting Started With
Email” on page 84 to set up a new account.
Note
You can also access certain email accounts through the home
page. Press MENU/OK > Web and then select Messaging >
Email > [PCS Mail, AOL & AIM Mail, MSN Hotmail, or Yahoo!
Mail]. Follow the onscreen instructions to enter your account
information and access your email messages.
Accessing Instant Messaging
Boost provides you with access to popular instant messaging (IM)
clients, including AOL® Instant Messenger™, MSN® Messenger, and
Yahoo!® Messenger.
1. From the home page, select Messaging > Instant Messaging.
2. Highlight an IM provider, such as AOL Instant Messenger, 
MSN Messenger, or Yahoo! Messenger, and press GO (left
softkey).
3. Use your keypad to enter the required sign-in information for
the selected provider, such as user name or password, and
select Sign In. (You will see Your IM screen for the selected
provider.)
Note
The information required to sign in will vary depending on the
instant messaging provider you are accessing.
3B. Web and Data Services
85
Web and Data
Note
4. Follow the onscreen instructions to read, reply to, compose,
and send messages and manage your IM account.
– or –
1. From the main menu screen, select Messages > IM.
2. Highlight an IM provider, such as AOL Instant Messenger, 
MSN Messenger (Windows Live Messenger ), or 
Yahoo! Messenger, and press
.
3. Follow steps 3 and 4 on page 85. (To finalize the procedure
in that step 3, press SIGN IN [left softkey].)
Note
Services may be available for an additional subscription fee. Visit
Boostmobile.com or call Boost Customer Care for additional
information.
Downloading Games, Ringtones, and
More
You have access to a dynamic variety of downloadable content,
such as Games, Wallpapers, and other applications. (Additional
charges may apply.) Follow the basic steps below to access and
download these items.
Accessing the Download Menus
1. Press
> My Stuff.
2. Select a download category (Games, Ringtones, Wallpapers, or
Applications ), and then select Get Stuff. (The browser will
start and take you to the corresponding download menu.)
To access the download menus from the Web browser:
1. From the home page, select Downloads.
2. Select Games, Ringtones, Wallpapers, or Applications to go to
the corresponding download menu. (For more information on
navigating the Web, see “Navigating the Web” on page 82.)
Selecting an Item to Download
You can search for available items to download in a number of ways:
86
3B. Web and Data Services
䢇
䢇
Featured displays a selection of featured items.
Categories allows you to narrow your search to a general
category, such as Country or Pop/Rock for Ringtones.
Search allows you to use your keypad to enter search criteria to
locate an item. You may enter an entire word or title or perform
a partial-word search.
Downloading an Item
Once you’ve selected an item you wish to download, highlight it and
press
, or press GO (left softkey). You will see a summary page
for the item including its title, the vendor, the download details, the
file size, and the cost. Links allow you to view the License Info page,
which outlines the price, license type, and length of license for the
download, and the Terms of Use page, which details the Premium
Services Terms of Use and your responsibility for payment.
2. Select an option to continue:
Select a menu such as Run/Open/Listen/View/Play to start the
downloaded item. Your data session will end, and your phone
will redirect you to the appropriate phone menu screen.
䡲 Select Set as to assign a ringtone or wallpaper to a phone
function.
䡲 Select Settings to configure downloaded games or applications.
䡲 Select Shop to browse for other items to download.
䡲 Press
to quit the browser and return to standby mode.
䡲
Note
Web and Data
䢇
Services may be available for an additional subscription fee. Visit
Boostmobile.com or call Boost Customer Care for additional
information.
To download a selected item:
1. From the information page, select Buy. (The item will download
automatically. When you see the New Download screen you
have successfully downloaded the item to your phone.)
Note
If you have not previously purchased an item, you will be
prompted to create your purchasing profile.
3B. Web and Data Services
87
Browser Menu
Send this page to... to send a URL via text messaging (SMS).
Clear private data to delete the browser’s cache, cookies, etc.
䡲 Help to show more detailed information about using the
browser.
䡲 Advanced
● Icon Row to display the icon row, the top area on the
screen that displays the status icons, time, battery
charge level, etc.
● Startup page to change the default launch page.
● Page info to display information about the current page.
● Images on/off to display images on the Web page.
● Reset browser to reset the browser to its default state.
● Turn on/off error logging to set whether to save error logs
(text files useful for debugging browser errors).
䡲 View error log to display the error log.
● Send referrer to send HTTP URL referrer information.
● Redirect prompt to display a prompt when your data is
being redirected.
● Reset browser settings to reset all browser settings.
● About browser to display information about your browser.
● Java Scripting to enable or disable Java scripting.
䡲
䡲
Although the home page offers a broad and convenient array of
sites and services for you to browse, not all sites are represented,
and certain functions, such as going directly to specific websites,
are not available. For these and other functions, you will need to
use the browser menu. The browser menu offers additional
options to expand your use of the Web on your phone.
Opening the Browser Menu
You may open the browser menu anytime you have an active data
session, from any page you are viewing.
To open the browser menu:
䊳 Press TOOLBAR (right softkey). (You will see the browser menu.)
Options available under the browser menu include:
䢇 MY HOMEPAGE to return the browser to the home page.
䢇 MY PAGES to access and manage your bookmarks.
䢇 SEARCH to launch a Web search.
䢇 OPTIONS to display additional options:
䡲 Set as Homepage to set the current page as your home page.
䡲 Font size to change the font size for the browser.
88
3B. Web and Data Services
Going to a Specific Website
Note
To go to a particular website by entering a URL (Web address):
Some pages cannot be saved as favorites, depending on how a
particular page was created.
1. From any Web page, press the navigation key up to highlight
the address bar.
2. Use your keypad to enter the URL of the website you wish to
go to and press
Note
.
Not all websites are viewable on your phone.
Saving a page as a favorite does not store the page contents, just
its address.
Accessing a Bookmark
1. Press TOOLBAR (right softkey) to open the browser menu.
Bookmarks allow you to store the addresses of your favorite
websites for easy access at a later time.
1. From the Web page you wish to add, press TOOLBAR (right
softkey) to open the browser menu.
3. Highlight a bookmark and press
Web and Data
2. Select MY PAGES.
Creating a Bookmark
.
Deleting a Bookmark
1. Press TOOLBAR (right softkey) to open the browser menu.
2. Select MY PAGES.
2. Select MY PAGES.
3. Highlight a bookmark and press OPTIONS (right softkey).
3. Confirm that Add this page to favorites is highlighted and
4. Select Delete this Favorite. (A confirmation will be displayed.)
press
.
4. Press ADD (left softkey).
5. Press REMOVE (left softkey) to remove the bookmark.
Reloading a Web Page
䊳
Press
while the Refresh icon ( ) at the upper right
corner of the browser is highlighted.
3B. Web and Data Services
89
Data Services FAQs
How will I know when my phone is ready for data service? 
Your user name (for example,
bsmith01@myboostmobile.sprintpcs.com) will be displayed when you
> Settings/Tools > Settings > Phone Info > My Account >
access
Account Details.
How do I sign in for the first time?
You are automatically signed in to access data services when you
turn on your phone.
How do I know when my phone is connected to data services?
Your phone automatically connects when data service is used or
an incoming message arrives. You will also see the
indicator.
Can I make calls and use data services at the same time?
You cannot use voice call and data services simultaneously. If you
receive a call while data service is active, your phone forwards the
call to voicemail. You can place an outgoing call anytime, but it
will interrupt any in-progress data session.
When is my data connection active?
Your connection is active when data is being transferred.
Outgoing calls are allowed; incoming calls go directly to
voicemail. When active, the
indicator flashes on your phone’s
display screen.
90
3B. Web and Data Services
When is my data connection dormant?
If your phone receives no data for 10 seconds, the connection
goes dormant. When the connection is dormant, you can make
and receive voice calls. (The connection may become active again
quickly.) If no data is received for an extended period of time, the
connection will terminate.
Can I sign out of data services?
You can sign out without turning off your phone; however, you will
not be able to browse the Web or use other data services. While
signed out, you can still place or receive phone calls, check
voicemail, and use other voice services. You may sign in again at
> Settings/Tools > Settings >
any time. To sign out, press
Others > Data > Data On in your phone’s menu.
When the Location feature is on, your phone’s standby screen will
display the
icon. When Location is turned off, your phone will
display the
icon.
3C. Navigation
Note
⽧
GPS Services (page 91)
⽧
Navigation (page 91)
Turning Location on will allow the network to detect your position
using GPS technology, making some applications and services
easier to use. Turning Location off will disable the GPS location
function for all purposes except 911, but will not hide your
general location based on the cell site serving your call. No
application or service may use your location without your request
or permission. GPS-enhanced 911 is not available in all areas.
GPS Services
Activating Location Mode
Before using any of the location-based services, you must
activate your phone’s location feature.
1. Press
> Settings/Tools > Settings > Others > Location.
2. Read the disclaimer and press
3. Select On.
.
Navigation
Navigation gives you turn-by-turn directions onscreen and over
speakerphone.
Registering Navigation
Before you can use Navigation, your phone and service must be
registered. Complete the following:
1. Press
Navigation
Your phone’s built-in GPS capability gives you access to a number
of location-based services, including Navigation.
> Navigation.
2. Follow the onscreen instructions to enter and submit the
required information.
3C. Navigation
91
Using Navigation
1. Press
> Navigation.
2. Select an option and follow the onscreen instructions to get
directions or view maps.
DRIVE TO lets you enter an address (vocally or using the
keypad) or select from categories such as My Favorites,
Recent Places, or Businesses to search for turn-by-turn
directions.
䡲 SEARCH provides a categorized list of locations such as 
Gas Stations, Grocery Stores, and Hospitals to help find local
businesses and services.
䡲 MAPS & TRAFFIC lets you view maps and get traffic
information for your current location or for any other
location (same categories as DRIVE TO ).
䡲 SHARE & MORE provides access to additional services such
as Share Address, Record Location, and Preferences.
䡲
Note
92
Services may be available for an additional subscription fee. Visit
Boostmobile.com or call Boost Customer Care for additional information.
3C. Navigation
Section 4
Safety and Warranty
Information
䢇
4A. Important Safety Information
⽧
General Precautions (page 94)
⽧
Maintaining Safe Use of and Access to Your Phone (page 94)
⽧
Using Your Phone With a Hearing Aid Device (page 96)
⽧
Caring for the Battery (page 97)
⽧
Radio Frequency (RF) Energy (page 98)
⽧
Owner’s Record (page 100)
⽧
User Guide Proprietary Notice (page 100)
⽧
Copyright Notice (page 100)
This phone guide contains important operational and safety information
that will help you safely use your phone. Failure to read and follow
the information provided in this phone guide may result in serious
bodily injury, death, or property damage.
General Precautions
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
94
4A. Important Safety Information
䢇
䢇
䢇
䢇
䢇
䢇
To maximize performance, do not touch the bottom portion of your
phone where the internal antenna is located while using the phone.
Speak directly into the mouthpiece.
Avoid exposing your phone and accessories to rain or liquid spills. If your
phone does get wet, immediately turn the power off and remove the
battery.
Do not expose your phone to direct sunlight for extended periods of time
(such as on the dashboard of a car).
Although your phone is quite sturdy, it is a complex piece of equipment
and can be broken. Avoid dropping, hitting, bending, or sitting on it.
Any changes or modifications to your phone not expressly approved in
this document could void your warranty for this equipment and void your
authority to operate this equipment.
Authorized personnel should service your phone and accessories.
Failure to do so may be dangerous and void your warranty.
Maintaining Safe Use of and Access to
Your Phone
Do Not Rely on Your Phone for Emergency Calls
Mobile phones operate using radio signals, which cannot guarantee
connection in all conditions. Therefore you should never rely solely upon
any mobile phone for essential communication (e.g., medical
emergencies). Emergency calls may not be possible on all wireless
networks or when certain network services or mobile phone features are in
use. Check with your local service provider for details.
Turning Off Your Phone Before Flying
Using on your phone while driving (or operating the phone without a handsfree device) is prohibited in certain jurisdictions. Laws vary as to specific
restrictions. Remember to focus on driving first.
To prevent possible interference with aircraft systems, the U.S. Federal
Aviation Administration (FAA) regulations require you to have permission
from a crew member to use your phone while the plane is on the ground.
To help prevent the risk of interference, regulations prohibit using your
phone while the plane is in the air.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, RF signals from wireless phones may affect inadequately
shielded electronic equipment.
RF signals may affect improperly installed or inadequately shielded
electronic operating systems or entertainment systems in motor vehicles.
Check with the manufacturer or their representative to determine if these
systems are adequately shielded from external RF signals. Also check with
the manufacturer regarding any equipment that has been added to your
vehicle.
Personal Implantable Medical Devices
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately shielded
from external RF signals.
Note
Always request permission before using the phone in healthcare
facilities or near medical equipment.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off when in a
blasting area or in other areas with signs indicating two-way radios should
be turned off. Construction crews often use remote-control RF devices to
set off explosives.
Turn your phone off when you’re in any area that has a potentially explosive
atmosphere. Although it’s rare, your phone and accessories could generate
sparks. Sparks can cause an explosion or fire, resulting in bodily injury or
even death. These areas are often, but not always, clearly marked. They
may include:
䡲 Fueling areas, such as gas stations.
䡲 Below deck on ships and boats.
䡲 Fuel or chemical transfer or storage facilities.
䡲 Areas where the air contains chemicals or particles such as grain,
dust, or metal powders.
䡲 Any other area where you would normally be advised to turn off your
vehicle’s engine, for example.
Note
Never transport or store flammable gas, flammable liquids, or explosives
in the compartment of your vehicle that contains your phone or
accessories.
4A. Important Safety Information
95
Important Safety Information
Using Your Phone While Driving
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as they could
hurt themselves and others, damage the phone, make inadvertent
emergency calls, or make other calls that may impact your Boost account.
Using Your Phone With a Hearing Aid
Device
A number of Boost phones have been tested for hearing aid device
compatibility. When some wireless phones are used with certain hearing
devices (including hearing aids and cochlear implants), users may detect a
noise which can interfere with the effectiveness of the hearing device.
Some hearing devices are more immune than others to this interference
noise, and phones also vary in the amount of interference noise they may
generate. ANSI standard C63.19 was developed to provide a standardized
means of measuring both wireless phone and hearing devices to determine
usability rating categories for both.
Ratings have been developed for mobile phones to assist hearing device
users to find phones that may be compatible with their hearing device. Not
all phones have been rated for compatibility with hearing devices. Phones
that have been rated have a label located on the box. Your SANYO Mirro™
has an M4 and a T4 rating.
These ratings are not guarantees. Results will vary depending on the user’s
hearing device and individual type and degree of hearing loss. If a hearing
device is particularly vulnerable to interference noise, even a phone with a
96
4A. Important Safety Information
higher rating may still cause unacceptable noise levels in the hearing
device. Trying out the phone with your hearing device is the best way to
evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing
aid compatibility and are likely to generate less interference to hearing
devices than unrated phones. (M4 is the better/higher of the two ratings.)
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to
be more usable with a hearing device’s telecoil (“T Switch”or “Telephone
Switch”) than unrated phones. (T4 is the better/higher of the two ratings.
Note that not all hearing devices have telecoils in them.)
Hearing aid devices may also be measured for immunity to interference
noise from wireless phones and should have ratings similar to phones. Ask
your hearing healthcare professional for the rating of your hearing aid. Add
the rating of your hearing aid and your phone to determine probable
usability:
䢇 Any combined rating equal to or greater than six offers excellent use.
䢇 Any combined rating equal to five is considered normal use.
䢇 Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a
combined rating of six for “excellent use.” This is synonymous for T ratings.
Boost further suggests you experiment with multiple phones (even those
not labeled M3/T3 or M4/T4) while in the store to find the one that works
best with your hearing aid device. Should you experience interference or
find the quality of service unsatisfactory after purchasing your phone,
promptly return it to the store. More information about hearing aid
Getting the Best Hearing Device Experience
With Your Phone
To further minimize interference:
䢇 Set the phone’s display and keypad backlight settings to ensure the
minimum time interval (see also page 25):
1. Press
> Settings/Tools > Settings > Display > Backlight >
Backlight Dim or Backlight Off.
2. Highlight the minimum time interval setting and press
䢇
䢇
.
Position the phone so the internal antenna is farthest from your hearing
aid.
Move the phone around to find the point with least interference.
Caring for the Battery
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Charging
䢇
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s
performance.
䢇 Recently there have been some public reports of wireless phone
batteries overheating, catching fire or exploding. It appears that many, if
not all, of these reports involve counterfeit or inexpensive, aftermarketbrand batteries with unknown or questionable manufacturing standards.
Boost is not aware of similar problems with Boost phones resulting from
the proper use of batteries and accessories approved by the
manufacturer of your phone. Use only manufacturer-approved batteries
and accessories through your phone’s manufacturer. Buying the right
batteries and accessories is the best way to ensure they’re genuine and
safe.
Do not disassemble or open crush, bend or deform, puncture or shred
the battery.
Do not modify or remanufacture, attempt to insert foreign objects into
the battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazard.
Avoid dropping the phone or battery. If the phone or battery is dropped,
especially on a hard surface, and the user suspects damage, take it to a
service center for inspection.
Improper battery use may result in a fire, explosion or other hazard.
Do not short circuit a battery or allow metallic conductive objects to
contact battery terminals.
Keep the metal contacts on top of the battery clean.
Battery usage by children should be supervised.
䢇
䢇
䢇
In order to avoid damage, charge the battery only in temperatures that
range from 32° F to 113° F (0° C to 45° C).
Don’t use the battery charger in direct sunlight or in high humidity areas,
such as the bathroom.
The battery may need recharging if it has not been used for a long
period of time.
It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
4A. Important Safety Information
97
Important Safety Information
compatibility may be found at: www.fcc.gov, www.fda.gov, and
www.accesswireless.org.
Knowing Radio Frequency Safety
Storing
䢇
Don’t store the battery in high temperature areas for long periods of
time. It’s best to follow these storage rules:
Less than one month:
-4° F to 140° F (-20° C to 60° C)
More than one month:
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion (Li-Ion) Batteries
䢇
Promptly dispose of used batteries in accordance with local
regulations.
Never dispose of the battery by incineration.
Do not handle a damaged or leaking Li-Ion battery as you can be burned.
䢇 For safe disposal options of your Li-Ion batteries, contact your nearest
Boost authorized service center.
Special Note: Be sure to dispose of your battery properly. In some areas,
the disposal of batteries in household or business trash may be prohibited.
䢇
䢇
Radio Frequency (RF) Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned
on, it receives and transmits radio frequency (RF) signals. When you use
your phone, the system handling your call controls the power level. This
power can range from 0.006 watt to 0.2 watt in digital mode.
98
4A. Important Safety Information
The design of your phone complies with updated NCRP standards
described below.
In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE) and
the American National Standards Institute (ANSI) joined in updating ANSI’s
1982 standard for safety levels with respect to human exposure to RF
signals. More than 120 scientists, engineers and physicians from
universities, government health agencies and industries developed this
updated standard after reviewing the available body of research. In 1993,
the Federal Communications Commission (FCC) adopted this updated
standard in a regulation. In August 1996, the FCC adopted hybrid standard
consisting of the existing ANSI/IEEE standard and the guidelines published
by the National Council of Radiation Protection and Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use the Boost-supplied or Boost-approved carrying
case, holster or other body-worn accessory. If you do not use a body-worn
accessory, ensure the antenna is at least 0.866 inches (2.2 centimeters)
from your body when transmitting. Use of non-Boost-approved accessories
may violate FCC RF exposure guidelines. Other accessories used with this
device for body-worn operations must not contain any metallic components
and must provide at least 0.866 inches (2.2 centimeters) separation
distance including the antenna and the user’s body.
For more information about RF exposure, visit the FCC website at
www.fcc.gov.
FCC ID number: V65SCP-3810.
The SAR is a value that corresponds to the relative amount of RF energy
absorbed in the head of a user of a wireless handset.
More information on the phone’s SAR can be found from the following FCC
website: http://www.fcc.gov/oet/ea/.
The SAR value of a phone is the result of an extensive testing, measuring
and calculation process. It does not represent how much RF the phone
emits. All phone models are tested at their highest value in strict laboratory
settings. But when in operation, the SAR of a phone can be substantially
less than the level reported to the FCC. This is because of a variety of
factors including its proximity to a base station antenna, phone design and
other factors. What is important to remember is that each phone meets
strict federal guidelines. Variations in SARs do not represent a variation in
safety.
FCC Notice
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg are considered safe for
use by the public.
The highest reported SAR values of the SANYO Mirro™ are:
Cellular CDMA mode (Part 22):
Head: 0.32 W/kg; Body-worn: 0.46 W/kg
PCS mode (Part 24):
Head: 0.87 W/kg; Body-worn: 0.38 W/kg
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines.
4A. Important Safety Information
99
Important Safety Information
Specific Absorption Rates (SAR) for Wireless Phones
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
䢇 Reorient the direction of the internal antenna.
䢇 Increase the separation between the equipment and receiver.
䢇 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
䢇 Consult the dealer or an experienced radio/TV technician for help.
Owner’s Record
The model number, regulatory number, and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the
space provided below. This will be helpful if you need to contact us about
your phone in the future.
Model: SANYO Mirro™
Serial No.:
User Guide Proprietary Notice
T9 Text Input is licensed by Nuance Communications, Inc. and is covered
by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and
other patents pending.
100
4A. Important Safety Information
Copyright Notice
© 2010 Kyocera Corporation. All Rights Reserved. BOOST and
BOOSTMOBILE and Logo, and the Logo are trademarks of Boost. Other
marks are the property of their respective owners. “SANYO” is a registered
trademark of SANYO Electric Co., Ltd. and is used under license. KYOCERA
is a registered trademark of Kyocera Corporation. Kyocera manufactures
and markets the SANYO wireless line of products.
This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and
NetFront are trademarks or registered trademarks of ACCESS CO., LTD. in
Japan and other countries. This software is based in part on the work of the
Independent JPEG Group.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Kyocera Corporation is under license. Other
trademarks and trade names are those of their respective owners.
Kyocera Communications, Inc. is a wholly-owned subsidiary of Kyocera
International Inc.
⽧
Manufacturer’s Warranty (page 101)
Your phone has been designed to provide you with reliable, worry-free
service. If for any reason you have a problem with your equipment,
please refer to the manufacturer’s warranty in this section.
Manufacturer’s Warranty
Manufacturer’s Warranty
Kyocera Communications, Inc. (“KCI”) offers you, the original
purchaser who has purchased the enclosed subscriber unit (“Product”) only
from an authorized dealer in the United States, a limited warranty that the
Product, including accessories in the Product’s package, will be free from
defects in material or workmanship as follows:
A. ONE (1) YEAR LIMITED WARRANTY: For a period of one (1) year
from the date of original purchase, KCI will, at its option, either repair or
replace a defective Product (with new or rebuilt parts/replacements).
B. LIMITED WARRANTY ON REPAIRED/REPLACED PRODUCTS: For
a period equal to the remainder of the limited warranty period on the
Proof that the Product is within the warranty period in the form of a bill of
sale or warranty repair document that includes the date of purchase,
Product serial number and the authorized dealer’s name and address, must
be presented to obtain warranty service. This limited warranty is not
transferable to any third party, including but not limited to any subsequent
purchaser or owner of the Product. Transfer or resale of a Product will
automatically terminate warranty coverage with respect to it.
This limited warranty covers batteries only if battery capacity falls below
80% of rated capacity or the battery leaks. Also this limited warranty does
not cover any battery if (i) the battery has been charged by a battery
charger not specified or approved by KCI for charging the battery, (ii) any of
the seals on the battery are broken or show evidence of tampering, or (iii)
the battery has been used in equipment other than the SANYO brand
mobile phone for which it is specified.
This limited warranty does not cover and is void with respect to the
following: (i) Products which have been improperly installed, repaired,
maintained or modified (including the antenna); (ii) Products which have
been subjected to misuse (including Products used in conjunction with
hardware electrically or mechanically incompatible or Products used with
software, accessories, goods or ancillary or peripheral equipment not
supplied or expressly authorized by KCI for use), abuse, accident, physical
damage, abnormal use or operation, improper handling or storage, neglect,
exposure to fire, water or excessive moisture or dampness or extreme
4B. Manufacturer’s Warranty
101
Warranty
4B. Manufacturer’s Warranty
original Product or, on warranty repairs which have been effected on
Products for 90 days after the date of its repair or replacement, whichever
is longer, KCI will repair or replace (with new or rebuilt parts/replacements)
defective parts or Products used in the repair or replacement of the original
Product under the Limited Warranty on it.
changes in climate or temperature; (iii) Products operated outside
published maximum ratings; (iv) cosmetic damage; (v) Products on which
warranty stickers or Product serial numbers have been removed, altered, or
rendered illegible; (vi) customer instruction; (vii) cost of installation, set up,
removal or reinstallation; (viii) signal reception problems (unless caused by
defect in material or workmanship); (ix) damage the result of fire, flood,
acts of God or other acts which are not the fault of KCI and which the
Product is not specified to tolerate, including damage caused by
mishandling and blown fuses; (x) consumables (such as memory cards,
fuses, etc.); or (xi) any Products which have been opened, repaired,
modified or altered by anyone other than KCI or a KCI authorized service
center.
This warranty is valid only in the United States.
REPAIR OR REPLACEMENT, AS HERE IN ABOVE PROVIDED, IS
YOUR SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE
LIMITED WARRANTY. KCI SHALL HAVE NO LIABILITY FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT
NOT LIMITED TO LOSS OF PROFITS, LOST SALES, LOSS OF DATA,
LOSS OF USE OF THE PRODUCT, OR ANTICIPATED PROFITS
ARISING OUT OF USE OR INABILITY TO USE ANY PRODUCT (FOR
EXAMPLE, WASTED AIRTIME CHARGES DUE TO THE
MALFUNCTION OF A PRODUCT). THIS WARRANTY DOES NOT
COVER PRODUCTS SOLD “AS IS” OR “WITH ALL FAULTS”. KCI
MAKES NO OTHER EXPRESS WARRANTY WITH RESPECT TO THE
PRODUCTS. THE DURATION OF IMPLIED WARRANTIES, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THIS
EXPRESS WARRANTY.
102
4B. Manufacturer’s Warranty
Some States do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty lasts, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may have
other rights which vary from State to State.
To obtain warranty service, contact
Kyocera Communications, Inc.
Attention : Customer Services for Wireless Products
Phone : 866-SANYOWC (866-726-9692)
Web : http://www.sanyowireless.com
Numerics
3-Way Call 79
A
Abbreviated Dialing 19
Airplane Mode 31
Alarm 51
Alert Notification 34
Answering Calls 14
Antenna 13
Auto-Answer 34
Automatic Speech Recognition (ASR) 54
B
Backlight 25
Battery
Capacity 11
Charging 12
Installing 2
Removing 11
Adding an Entry 43
Assigning a Picture 47
Assigning a Speed Dial 46
Deleting an Entry 45
Dialing From 18
Editing an Entry 43
Finding Entries 45
Secret Entries 47
Countdown Timer 53
Bluetooth 68–72
Printing Pictures 72
Sending Data 71
Bookmark 89
C
Calculator 52
Calendar 49
Call
Answering 14
Ending 15
Forwarding 80
Making 14
Recording 57
Call Answer Mode 34
Call Waiting 79
Callback Number 30
Caller ID 79
Camera 60–67
Clock
Display 26
World Clock 53
Contacts 42
D
Data Services 81
Enabling/Disabling 37
FAQs 90
Launching 82
Security Features 37
User Name 81
Deleting
Contacts 45
Events 51
History 41
Messages 78
Phone Content 36
Voice Memo 58
Index
Index
Index
103
Dialing
From Contacts 18
With Pauses 18
Display Settings 25
Download
Ringtone 29
H
I
Icon indication 8, 38, 64, 69
Instant Messaging 85
F
Finding
Contacts 45
Phone Number 17
Font Size 27
G
GPS 91
Greeting 26
Group
Adding Members to 44
Creating 43
104
Index
M
Headset Mode 35
Hearing Aid Device
Compatibility (HAC) Mode 33
History 38
Saving a Number From 40
Viewing From Contacts 42
E
Email 84
Emergency Call 15
Entering Text 20
Preset Messages 31
Locking
Phone 35
Making From History 40
Removing Members From 44
K
Key Beeps 27
Keyguard 13
L
Language
Display 27
Preset Messages 31
Location 91
Lock Code 35, 36
Making Calls 14
From Contacts 18
From History 40
Using ASR 54
Media Mail 65
Menu i
Messaging
Notification 30
Settings 30
Thread 77
Missed Call 15
Multiple Shots 62
Muting
Ringtone 15
Voice 16
My Favorites 34
My Name Card 47
U
Saving
Phone Number 17
Phone Number From History 40
Security 35
Self-timer 62
Services
411 3
Dialing 48
Operator Services 3
Signature 31
Silence All 28
Speed Dialing 19
Assigning Numbers 46
Stopwatch 53
Phone (illus.) 6
Phone Number
Displaying 13
Finding 17
Saving 17
With Pauses 18
Pictures 60
Assigning 61
Sending 65
Storing 64
Taking 60
Plus (+) Code Dialing 18
Power Save Mode 26
Preset Messages 31
R
T
Resetting 36
Ringtones
Assigning 28
Downloading 29
Text Messaging 76
To Do 50
TTY Use 32
Turning Your Phone On and Off 10
Unlocking Your Phone 35
User Name 81
V
Vibration 30
Voice Guide 29
Voice Memo 57
Voicemail 74
Setting Up 2
Volume 27
W
Wallpaper 25
Web, see also Data Services 81–90
World Clock 53
Z
Zoom 62
Index
S
P
Index
105
Download PDF
Similar pages