advertisement
DIRECTIONS FOR USE model FD01
WARNING:
Disassembly of the electronic components within this unit may result in exposure to lead in the form or a solder , which is known to to state of California to cause cancer, birth defects and other reproductive harm.
Dear Valued Customer,
Thank you and congratulations on your purchase of this innovative product. We back our product with a Viatek certified warranty. Your satisfaction is very important to us.
For operational questions or replacement parts please call: 888-7VIATEK or contact your local
VIATEK dealer.
Visit us on the web at www.viatekproducts.com for new product updates and information. Also please email us with any comments or questions at [email protected]
We look forward to serving you, now and in the near future.
Enjoy your Viatek Designed Product!
Kelli M. Lentine
Kelli M. Lentine
President
888-7VIATEK
WIND-UP TO CHARGE
• Turn off the light.
• Take out the wind-up handle.
• Keep rotating the wind-up handle in one
direction (clockwise or counter-clockwise
feasible).
• Press it down for closing.
4-PHASE ON/OFF SWITCH
• push once for LED on
• push again to turn LED off
• push three times to turn 3 LEDs on
• push again turn 3 LEDs off
NOTE
• Keep the switch on “OFF” position when
not in use.
• Avoid pointing the light at the eyes.
• Water resistant design.
• Always keep the switch on “OFF” position
while recharging battery.
• Keep rotating to one direction only.
• For longer periods of light, wind in excess
of 1 minute.
SPECIFICATIONS
• Rechargeable LIR2032 lithium battery: 3.6V,
35mA
• Rotate 120 cycles per minute, output power 1W
• Winding for 1 minute will produce up to 2 hours
of light on single bulb.
1 minute of cranking will produce up to 2 hours of light.
cell charging plug located on back.
To charge cell phone: plug the appropriate plug into your cell phone, and the other end into the cell phone charging plug on the TriLed and crank
Charging Kit.
If your cell phone plug is not included, please see your local electronics store.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project