Pocket Reference Guide
QSC is a globally recognized manufacturer of audio, video and control
systems for huddle rooms to large outdoor venues—and everything in
between. While we’re known for solid amplifiers and loudspeakers, we have
a rich legacy in networked audio and digital signal processing. This history,
combined with strong IT expertise, allows our team to develop flexible,
software-based system solutions. Our systems enable your team to
design and integrate projects that deliver the native IT integration and
standards-based technology today’s IT decision makers expect.
The following pages represent our latest systems products and
technologies. Designed to give you a brief overview, this guide should be
considered a supplement to the products and solutions pages online at
qsc.com. You will find a fully updated, comprehensive set of information,
documentation, tools and images that work in tandem with this guide.
Additionally, our online training site is another great resource to learn more
about QSC products and solutions.
Enjoy the guide.
2
Table of Contents
Table of Contents
Loudspeakers
Q-SYS™ System Platform
Q-SYS Processors
6
Networked Amplifiers
10
Q-SYS AV-to-USB Bridging Solution
14
Q-SYS I/O Peripherals
17
Q-SYS Control Peripherals
19
Q-SYS I/O Cards
22
Q-SYS Public Address Peripherals
24
Amplifiers
Ceiling-mount
AcousticCoverage™
AcousticDesign™
42
46
Pendant-mount
AcousticDesign™
54
Surface-mount
AcousticCoverage™
AcousticDesign™
58
60
AcousticPerformance™ Series
72
28
ILA Series (Installation Line Array)
76
30
K.2 Series Powered Loudspeakers
80
CX Series
32
KS Series Cardiod Subwoofer
82
PowerLight™ 3 Series
34
KW Series Active Loudspeakers
84
CMXa Series
36
KLA Series Active Loudspeakers
86
ISA Series
38
K Family Accessories
88
SPA Series
CXD Series
Digital Mixers
TouchMix™ Series
92
3
Q-SYS ™
PL ATFORM
6
Q-SYS Platform
Q-SYS Platform
7
The World’s Most Powerful Software-Based Platform
for Audio, Video & Control
Core 2200 / Core 5200
Q-SYS™, QSC’s software-based platform, gives the systems integrator and
end user a unified software design tool and feature set suitable for projects of
any scale. With the bandwidth to handle even the most complex configurations,
Q-SYS is ready for any job, from boardrooms and hotels to airports and
stadiums. Built from the ground up to leverage mainstream IT hardware and
networking technology, the Q-SYS Platform runs all audio, video and control
processing in a purpose-built Linux kernel with real-time extensions on Intel
processing. This Intel hardware meets industry-best reliability standards and is
used in many of the world’s most mission-critical projects on a powerful, open,
IT-friendly foundation, the Q-SYS Platform transcends the limitations in scope,
performance, and usability that keep other network audio, video and control
systems from reaching their full potential.
Q-SYS Core
110f
Q-SYS Core
510i
Q-SYS Core
1100
Q-SYS Core
3100
Q-SYS Core
2200*
Q-SYS Core
5200*
Built-In
Local Flex
AEC
Networked
Channels Processors
Audio I/O
VoIP
Instances
USB
Audio I/O
Instances
AV-to-USB
Bridging
POTS
GPIO
Local
Inputs
Local
Outputs
8
8
8
16
128 x 128
4
4
1
1
16 x 16
128
128
N/A
64
256 x 256
64
†
†
N/A
16
64
64
N/A
96
256 x 256
64
†
†
N/A
16
64
64
N/A
192
512 x 512
64
†
†
N/A
16
N/A
N/A
N/A*
128*
512 x 512*
64*
†
†
N/A*
16*
N/A
N/A
N/A*
256*
512 x 512*
64*
†
†
N/A*
16*
† Available is combined with additional Q-SYS peripheral like the I/O-USB Bridge
* Specification subject to change
Next-Generation Q-SYS Enterprise Cores
For IT customers wishing to deploy audio, video and control (AV&C) solutions
as a building-wide service throughout the enterprise, QSC has partnered
with Dell™ to bring an industry-first integration combining the processing
capabilities of the Q-SYS real-time operating system with the world-class
Dell R730 server platform resulting in the only IT grade AV&C solution
available, built on standard, off-the-shelf IT hardware.
•Centralized Shared Resource: Take advantage of the corporate
infrastructure and place your Q-SYS Cores alongside other building-wide
IT services such as VoIP, UC&C, security and access control servers.
•Flexibility: Ability to serve all of your meeting, conferencing, presentation
and lobby spaces from a single platform designed from the ground up to
provide all of your audio, video and control requirements.
•Simplicity & Familiarity: Leveraging the most ubiquitous and capable
processing platform available today, the next-generation Q-SYS
Enterprise Cores utilize common hardware familiar to IT managers
worldwide and offer embedded Dell Remote Access Controller (DRAC)
for simple integration with existing IT asset management tools.
•Reliability: World-renowned robust engineering found in the Dell R730
server platform provides IT users with peace of mind that the AV&C
solution is built on industry leading hardware, designed to last,
with standard features such as dual redundant networking and
power supplies.
8
Q-SYS Platform
Q-SYS Platform
9
Core 110f
Unified Core
With an abundance of acoustic echo cancellation (AEC), raw
processing power and networked audio channel count, the Q-SYS Core
110f offers the best cost-to performance ratio of any in-room
processing solution available. This smaller core is ideal for: acoustic
echo canceling and sound reinforcement in small to large meeting or
multipurpose rooms, sound reinforcement in performance venues such
as houses of worship and theaters, background music systems, wide
area paging in airports, convention centers and hospitals.
•Class leading I/O: Core 110f has 24 I/O + USB, POTS and VoIP
Core 510i
NEW Integrated Core and I/O Expander
Q-SYS™ Core 510i represents the second generation of QSC’s Integrated
Core Platform. It features eight I/O card slots which can be populated with
any combination of Q-SYS I/O cards allowing for up to 128x128 local
channels plus a total of 256x256 network channels for diverse connectivity
options. Native Q-LAN and AES67 networked audio allows for system
expansion using Q-SYS I/O expanders or peripheral devices from 3rd party
manufacturers. Core 510i can also be configured via software to behave as
an 8 card slot I/O-Frame for connection to any other Core processor for even
higher channel density I/O capability.
simultaneously offering the best cost-to-I/O ratio in a single SKU, single
chassis product available on the market.
•8 Flex Channels: Nearly all the flexibility of a card-based DSP solution
without the hassle of multiple SKU’s and custom ordering.
•AV-to-USB Bridging Capability: Core 110f provides on-board USB bridging
capability (via USB-B port) for audio and Q-SYS PTZ-IP camera feeds to
PCs, ideal for soft-codec application such as Skype for Business™,
GoToMeeting™ and others.
•True IT Software Integration: The Q-SYS Software platform is a true IT
solution that is free of the fixed hardware limitations seen in competing
products. It allows for greater functionality such as Layer 3 routing, LDAP
contact server integration, SNMP monitoring, and more.
•Suite of Software-Based Conferencing Technology applications: Built by QSC
from the ground up allowing for continued refinement, without minimal
requirement for additional hardware. The suite includes next-generation
AEC, multiple-instance SIP softphones, gain sharing and
gating automixers.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Core 1100 / 3100
Enterprise Core
These Q-SYS™ Enterprise Core models are both tailored to meet the
demanding needs of large scale installations. Core 1100 (256x256
network channels), and Core 3100 (512x512 network channels) are
designed to work with numerous PTZ-IP conference cameras, touch
screen controllers, page stations and amplifiers, with each of these
multiple peripherals located remotely throughout the venue.
10
Q-SYS Platform
Q-SYS Platform
11
CXD-Q Series Network Amplifiers
CXD4.5Q
Designed specifically for use with the Q-SYS™ Platform, CXD-Q Series
amplifiers marry the new amplifier technology found in the CXD Series
with the powerful Q-SYS network processing and control system to
create the perfect solution for installed applications. The CXD-Q Series
includes seven models, three four channel (CXD4.2Q, CXD4.3Q and
CXD4.5Q), and four eight channel (CXD8.4Q, CXD8.4Qn, CXD8.8Q,
CXD8.8Qn). These amplifiers are capable of delivering robust,
high-fidelity power to drive a wide range of loudspeaker configurations
including 70V and 100V systems.
The “Q” models offer mic/line inputs into the Q-SYS Platform, while the
“Qn” models provide no analog inputs thereby reducing the overall
system cost. By simply connecting the amplifiers to a standard Ethernet
or IP network, the Q-SYS Core can route audio to/from the amplifiers,
as well as provide total control and monitoring of all amplifier functions.
Flexible Amplifier Summing Technology™ (FAST) is available on all
models and allows the integrator to combine two, three or up to four
amplifier channels together for maximum current and/or voltage output.
CXD8.4Qn
•Seamless Q-SYS™ integration with audio transport and control via
standard Gigabit Ethernet protocols and hardware.
•Capable of providing up to 8,000 W peak and 5,000 W continuous with
Low-Z, 70V, or 100V direct drive available on all models (except the
CXD4.2Q).
•CXD-Qn models are “network input only” (no analog inputs) to reduce
system cost.
•Touch-proof Euroblock loudspeaker connections.
•Flexible Amplifier Summing Technology™ (FAST) permits up to four
channels to be combined for higher output power.
•PowerLight universal switchmode power supply with PFC for highest
efficiency, and low weight.
•Eight bi-directional GPIO connections that can be used for analog or
digital inputs or outputs to/from Q-SYS.
•Built-in energy saving modes ensure that the amplifier will draw the
minimum amount of AC power while still providing outstanding
audio quality.
12
Q-SYS Platform
Q-SYS Platform
CXD4.2Q
70 V
100 V
4 Independent Channels
A, B, C, D
2 Channels BTL Bridged
A+B or C+D
Doubles Voltage
2 Channels Parallel
AB or CD
Doubles Current
1 Channel 3CH Parallel
ABC
Triples Current
1 Channel Bridged/Parallel
AB+CD
Doubles Current and Voltage
1 Channel 4CH Parallel
ABCD
Quadruples Current
CXD4.3Q
CXD8.4Q /
CXD8.4Qn
CXD4.5Q
Peak
Peak
Peak
N/A
500W
1000W
N/A
625 W
1250 W
8Ω
500 W
900 W
1200 W
4Ω
700 W
1400 W
2000 W
2Ω
625 W
1200 W
1600 W
8Ω
1200 W
2400 W
4000 W
4Ω
1500 W
NR*
NR*
2Ω
NR*
NR*
NR*
8Ω
500 W
1300 W
1250 W
4Ω
950 W
2000 W
2400 W
2Ω
1200 W
2500 W
4000 W
8Ω
500 W
1400 W
1400 W
4Ω
950 W
2400 W
2500 W
2Ω
1800 W
3500 W
4500 W
8Ω
1600 W
3500 W
4500 W
4Ω
2500 W
5000 W
7500 W
2Ω
NR*
NR*
NR*
8Ω
500 W
1400 W
1600 W
4Ω
1000 W
3000 W
3000 W
2Ω
1700 W
5000 W
5300 W
8 Independent Channels
A, B, C, D, E, F, G, H
2 Channels Combined in
BTL Bridge A+B or C+D or
E+F or G+H Doubles Voltage
2 Channels Combined in Parallel
AB or CD or EF or GH
Doubles Current
3CH Combined in Parallel
ABC or EFG
Triples Current
4CH Combined in Bridged/Parallel
AB+CD
Doubles Current and Voltage
4CH Combined in Parallel
ABCD or EFGH
Quadruples Current
13
CXD8.8Q /
CXD8.8Qn
Peak
Peak
70 V
500 W
850 W
100 V
500 W
850 W
8Ω
500 W
850 W
4Ω
500 W
1000 W
2Ω
500 W
600 W
8Ω
1000 W
2000 W
4Ω
NR*
NR*
2Ω
NR*
NR*
8Ω
1000 W
1100 W
4Ω
1000 W
1800 W
2Ω
1000 W
2000 W
8Ω
1000 W
1100 W
4Ω
1500 W
1800 W
2Ω
1500 W
2800 W
8Ω
2000 W
3600 W
4Ω
2000 W
4500 W
2Ω
NR*
NR*
8Ω
1200 W
1200 W
4Ω
2000 W
2200 W
2Ω
2000 W
4000 W
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Q-SYS Platform
15
AV-to-USB Bridging Solution
NEW Q-SYS PTZ-12x72 / PTZ-20x60
• Highest-quality HD Imaging: These two 1080p Pan, Tilt, and Zoom (PTZ)
conference room cameras cover all room types. The PTZ-12x72 is ideal
for small and wide rooms, providing a wide 72° horizontal field of view and
12x optical zoom lens. The PTZ-20x60 is ideal for larger, longer room with
a 20x optical zoom lens with a 60° horizontal field-of-view.
• Eliminates USB Limitations: A single PoE Ethernet cable simplifies the
installation of these network cameras, allowing you to install as many
cameras as you need to cover any room or an entire campus. When
combined with the networked I/O USB Bridge, you can offer end users
USB audio and video feed access points anywhere on the system. Q-SYS
bridging peripherals allow you to simultaneously connect virtually any
number of PCs to these cameras without complicated and expensive USB
switches or extenders.
• Simplified Control: View and control video camera feeds from any Q-SYS
user control interface. System designers can customize the camera
controls to meet their needs, from simple automated conference room
use to more comprehensive switching and monitoring controls.
16
Q-SYS Platform
Q-SYS Platform
17
AV-to-USB Bridging Solution
NEW Q-SYS I/O USB Bridge
•Standard USB 2.0 Driverless connection: The Q-SYS AV-to-USB Bridging
solution leverages standard UAC and UVC USB drivers for USB audio and
video. No additional software or drivers are required to make the solution
work with modern PC operating systems and soft codec applications
such as Skype for Business™, GoToMeeting™ and others.
•AV Access Everywhere: Small enough to fit anywhere you need USB access
into your Q-SYS installed room AV systems. These PoE network devices
provide USB access to a host PC or other user device.
•Eliminates USB Limitations: Eliminate the need for complicated and
expensive USB switches and extenders for Q-SYS USB/BYOD
connectivity. Being a small PoE network peripheral, I/O-USB Bridges
can easily be mounted closely to every USB host that needs Q-SYS AV
access.
NEW I/O-8 Flex Channel Expander
The I/O-8 Flex allows for analog I/O deployment to a Q-SYS system either
in the rack or remotely located near the source or destination device
using only a single, PoE+ network cable.
As part of the Q-SYS Platform, the I/O-8 Flex is fully supported by all
Q-SYS Core processors, making it a cost effective expander for the
smaller Unified and Integrated Core series. Furthermore, when paired
with the Enterprise Cores, the I/O-8 Flex makes it simple to realize a truly
centralized processing system.
•
Q-SYS Flex I/O Channels: Eight channels of analog I/O that can be
configured real-time in software as either a Mic/Line input with
phantom power or line level output with single channel granularity.
•
USB Audio Bridging: A single USB-B device port allows for hassle-free
soft codec integration with the Q-SYS platform either at the rack or
remotely in typical BYOD applications.
•
Onboard Control I/O: 8x8 GPIO and one RS232 allow for additional
in-room control options.
•
PoE+ with Auxiliary Power Supply Input: PoE+ streamlines the workflow
of the system designers and installers ensuring that it is both simple
and cost effective to deploy anywhere on a standard IT network.
•Redundancy: The I/O-USB Bridge provides two network ports for fully
redundant connectivity.
18
Q-SYS Platform
Q-SYS Platform
19
Control Peripherals
I/O Frame
The Q-SYS I/O-Frame and Q-SYS Core 510i (in I/O-Frame mode) provide
remote points of connection that interface Q-SYS with other components in the
system, including microphones, mixers and power amplifiers. The I/O-Frame
offers four available card slots and up to 16x16 audio I/O while the Core 510i
(in I/O-Frame mode) offers eight available card slots and up to 128x128
channels of audio connectivity.
TSC-7t Tabletop Touch Screen Controller
•Consolidate Dialing and Control: In addition to the dialing functionality for
your conferences, this 7" screen (800px x 480px) can be used to control
a myriad of third-party devices prevalent in boardrooms and meeting
rooms via the Core (no additional control processor required).
•BYOD Bridging Options: Allows meeting participants to interface 2-way
audio from Q-SYS to UC or web conferencing applications like Skype
for Business™ and Go-to-Meeting™ via the touchscreen’s micro
USB connection.
I/O-22
•Capacitive Touch Technology: Eliminates physical knobs and buttons
Providing two mic/line inputs and two line outputs, the I/O-22 is ideal for
applications such as legislative or judicial chambers, meeting rooms,
ballrooms, ancillary zones, classrooms, VIP suites, and stage patching.
•Single Drop PoE cabling: Ethernet connection for simplified wire
•Connects directly to the Gigabit Ethernet network via redundant Q-LAN
•Table Mounting System: Carefully designed weighted base with rubber
increasing product reliability.
terminations without the need for additional power wiring.
•Redundancy Options: TSC-7t provides two network ports for connection
full control redundancy.
ports (RJ-45 Ethernet connectors).
•Powered via PoE (Power over Ethernet) or 24 VDC.
•Includes an 8.5 watt mono amplifier to drive a local monitor speaker.
•Other connections include a scriptable RS-232 port and eight
GPIO ports.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
pad prevents the touch screen from sliding, while the included threaded
brass mounting post offers permanent through-table mounting with
clean cable management.
20
Q-SYS Platform
Q-SYS Platform
TSC-7w Wall-mount Touch Screen Controller
21
TSC-47w-G2 Wall-mount Touch Screen Controller
•Configurable Wall-Mounted Control: This 7” screen (800px x 480px) can be
•High Resolution Display: High resolution 960x540 full color LCD display
•Capacitive Touch Technology: Eliminates physical knobs and buttons
•Versatile: Ability to operate in portrait or landscape orientation.
•Single Drop PoE Cabling: Ethernet connection for simplified wire
•Universal Mounting Options: Included accessories for mounting to
•Redundancy Options: TSC-7w provides two network ports for full control
•Capacitive Touch Technology: Eliminates physical knobs and buttons
used to control a myriad of third-party devices prevalent in boardrooms
and meeting rooms via the Core (no additional control processor required).
increasing product reliability.
terminations without the need for additional power wiring.
redundancy.
with in-plane switching technology for improved off-axis viewing.
standard US and European wall and junction boxes.
increasing product reliability.
•Single Drop PoE Cabling: Ethernet connection for simplified wire
terminations without the need for additional power wiring.
22
Q-SYS Platform
Q-SYS Platform
23
I/O Cards
•AES-3 Digital Input/Output Card (CAES4): Four input and four output
Mic/Line Analog Input Card
DataPort™ Output Card
channels of AES-3 digital audio for interfacing between Q-SYS and digital
devices such as mixing consoles and recording devices.
•AES-16 Input Card (CIAES-16): 16-channel AES/EBU (AES3) 24-bit digital
Analog Line Output Card
Dante™ Network Audio Bridge Card
AES-3 Digital Input/Output Card
AVB Audio Bridge Card
input Q-SYS peripheral card that utilizes IT industry standard RJ45
connectors.
•DataPort Output Card (CODP4): Four audio output channels
AES-16 Digital Output Card
CobraNet™ Input/Output Card
I/O Cards
(2 DataPorts) for connection to DataPort equipped QSC amplifiers. The
DataPort interface allows audio, status monitoring, and control between
Q-SYS and QSC DataPort power amplifiers.
•CobraNet™ Digital Input/Output Card (CCN32): Input/output interfacing with
legacy CobraNet-based audio networks. The CobraNet card allows for
several operating modes, 4x4, 8x8, 16x16, when used in an I/O Frame
or up to 32 x 32 when used in a Core or high channel density
Q-SYS I/O Expander.
The following cards are available for Q-SYS Integrated & Enterprise
Cores, as well as the I/O Frames:
•Dante™ Audio Bridge Card (CDN64): Provides a bridge for up to 64 x 64
•Mic/Line Analog Input Card (CIML4/CIML4-HP): Four channels of mic/line-
•AVB Audio Video Bridge Card (CAN32): Provides a digital bridge between
level analog audio input with 48 V phantom power. This card provides
standard inputs for sources like for microphones, mixers and CD/DVD
players. The input card is also available in a high performance version
(CIML4-HP) featuring broadcast quality pre-amps and A/D converters.
•Analog Line Output Card (COL4): Four channels of balanced, line
level analog output for interfacing between Q-SYS™ and outboard
equipment such as non-network amplifiers amplifiers, recording
devices and teleconference systems.
channels of Dante audio in to the Q-SYS platform for redistribution over
larger LAN and WAN IT infrastructures.
any 100mb AVB 1722.1 compliant edge network and the Q-SYS
Platform. The CAN32 can support 32 total channels at 48 kHz in three
available operating modes: 0/32, 32/0 or 16x16.
24
Q-SYS Platform
Q-SYS Platform
25
Public Address Peripherals
Q-SYS™ offers a suite of tools that provide sophisticated paging and
messaging functionality to support any-sized paging application including
convention centers, transportation terminals, theme parks and more. Q-SYS
offers a number of paging-specific advantages that sets it apart from
alternative approaches:
•Simple, integrated platform: Q-SYS enables paging with simplified bills of
material including playback, record, and store-and-forward.
•Ample paging capacity: With Cores supporting up
to 1024 total network channels.
•Two Q-LAN network interfaces enabling connection to two switch ports
or deployment on two separate networks.
•Capacitive touchpad that offers visible feedback and audible cues
including illuminated status indicators.
•Built-in 240 x 64 monochrome graphics LCD display.
•Powered via PoE (Power over Ethernet) or external 24VDC.
•Rear panel auxiliary audio inputs can accommodate
a secondary microphone.
•Page Stations: Built to withstand the rigors of daily
use, all page stations are powered over Ethernet
and offer secure access, high-fidelity gooseneck
or handheld microphones, and capacitive touch
buttons.
•Auxiliary output can drive a local amplifier, powered loudspeaker or other
destination device.
•GPIO interface can be configured to use external events to affect paging
operation or be the source of events to affect external control systems.
•PA Router: Supports live and delayed paging,
scheduled messaging, announcement recording,
live page routing, triggered playback, and event
scheduling.
All Page Stations feature:
•Designed for both desktop and wall-mounted installation and include
PS-1600G
either handheld (H) or gooseneck (G) microphone.
Q‑SYS Networked Page Stations
PS-X
Available with either gooseneck or handheld microphone (push to talk),
the Q-SYS Networked Page Station is a dual-port network device that is
fully configurable from Q-SYS Designer Software. Each station connects to
a Q-SYS system via Q-LAN, which handles all audio deliveries to and from
the station. Four Networked Page Station models are currently available:
A handheld paging accessory for any Q-SYS™ Page Station
provides a secondary remote microphone and is designed
to fit into a standard U.S. 2-gang wall box.
•PS-1600H/G: 16 buttons total, including four
command buttons (command code A-D). Also
includes a numeric keypad and supports security
features including automatic logoff time out, logon
requirements, and user restrictions.
PS-X Paging Accessory
•PS-1650H/G: 16 command buttons
(command code A-P).
PS-1650H
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AMPLIFIERS
28
Amplifiers
Amplifiers
SPA Series Amplifiers
SPA2-60
SPA4-60
SPA2-200
SPA4-100
Stereo Mode
8Ω
4Ω
60 W
60 W
60 W
60 W
200 W
200 W
100 W
100 W
Bridged Outputs
8Ω & 4Ω
70V
100V
200 W
250 W
250 W
200 W
250 W
250 W
400 W
350 W
350 W
200 W
350 W*
350 W*
*Burst Power - dependant on other channel loads
The SPA Series are half rack 1RU, convection cooled power amplifiers,
delivering two or four channels of power that can be bridged to supply up
to 350W per channel pairs into 70V or 100V. The SPA2-60 and SPA4-60
will deliver 60 watts per channel, while the SPA4-100 will deliver 100
watts per channel and SPA2-200 will deliver up to 200 watts per channel
into 4Ω and 8Ω. Utilizing an advanced Class-D amplifier design and
Universal Power Supply, the SPA Series are amazingly efficient, allowing
them to be convection cooled and ENERGY STAR® qualified with quiet
auto-ramp standby functionality. SPA Series amplifiers are housed in an
unobtrusive 1/2 RU chassis with unique mounting hardware enabling rack,
table and wall mounting capabilities.
•Up to 200 watts into 4Ω and 8Ω, and up to 350 watts into
70V and 100V.
•ENERGY STAR® qualified amplifier: Efficient class-D amplifiers
that conserve energy and require no active cooling, so they reduce
operational costs.
•Bridgeable outputs for higher power: Bridging the outputs of the
SPA Series amplifiers provide up to 400 watts into low impedance,
and 350 watts into 70V or 100V offering outstanding flexibility.
•Auto-Ramp provides quiet startup and power-down: The
ENERGY STAR® Auto-Ramp circuitry ensures quiet and fast power
up from Standby and seamless power-down following 25 minutes of
inactivity, dramatically reducing power consumption.
•Rack-mountable 1U, half rack width enclosure: Can be mounted
in 1/2 RU reducing rack space requirements. In addition their clever
joining “brackets” enable easy under-table and wall-mounting.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
29
30
Amplifiers
CXD Series Processing Amplifiers
70 V
4 Independent Channels
A, B, C, D
2 Channels BTL Bridged
A+B or C+D
Doubles Voltage
Representing a revolutionary advancement in amplifier design, CXD Series
amplifiers feature powerful onboard DSP and deliver robust, high fidelity
power housed in a 2RU chassis. Designed with integrators in mind, the
CXD Series includes three models (CXD4.2, CXD4.3 & CXD4.5) capable of
driving a wide range of loudspeaker configurations including 70V and
100V systems. Flexible Amplifier Summing Technology™ (FAST) actively
distributes total amplifier power across one, two, three or all four outputs
enabling amp channels to be paralleled or bridged for maximum current
and voltage output.
•Up to 5,000W continuous and 8,000W peak with 70V/100V direct
drive on the CXD4.3 and CXD4.5.
•Flexible Amplifier Summing Technology™ (FAST) permits total amplifier
31
Amplifiers
2 Channels Parallel
AB or CD
Doubles Current
1 Channel 3CH Parallel
ABC
Triples Current
1 Channel Bridged/Parallel
AB+CD
Doubles Current and Voltage
1 Channel 4CH Parallel
ABCD
Quadruples Current
100 V
CXD4.2
CXD4.3
Peak
Peak
CXD4.5
Peak
N/A
500W
1000W
N/A
625 W
1250 W
8Ω
500 W
900 W
1200 W
4Ω
700 W
1400 W
2000 W
2Ω
625 W
1200 W
1600 W
8Ω
1200 W
2400 W
4000 W
4Ω
1500 W
NR*
NR*
2Ω
NR*
NR*
NR*
8Ω
500 W
1300 W
1250 W
4Ω
950 W
2000 W
2400 W
2Ω
1200 W
2500 W
4000 W
8Ω
500 W
1400 W
1400 W
4Ω
950 W
2400 W
2500 W
2Ω
1800 W
3500 W
4500 W
8Ω
1600 W
3500 W
4500 W
4Ω
2500 W
5000 W
7500 W
2Ω
NR*
NR*
NR*
8Ω
500 W
1400 W
1600 W
4Ω
1000 W
3000 W
3000 W
2Ω
1700 W
5000 W
5300 W
power to be distributed across one, two, three or all four channels.
•Onboard full function loudspeaker processing including Crossover,
EQ, Limiting and Alignment Delay eliminate the need for outboard
loudspeaker processors.
•Intrinsic Correction™ ensures optimum sonic performance of
QSC loudspeakers.
•Preset Wizard simplifies setup, providing system design tools
and loudspeaker selection.
•Factory presets can be used as is, or modified and stored as
one of 50 user presets.
•Four Euroblock inputs and Four Euroblock touch-proof
speaker outputs.
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count
•
Four Euroblock inputs and Four Euroblock touch-proof
speaker outputs.
•PowerLight universal switchmode power supply with Power Factor
Correction for highest efficiency, improved audio performance,
and low weight.
•Amplifier Navigator software (via USB connection) running on a PC or
Mac for control, monitoring, and amplifier management. Amp Navigator
also provides on-line and off-line editing of Presets and Speaker Profiles
along with library management.
•PowerLight universal switchmode power supply with Power Factor
Correction for highest efficiency, improved audio performance,
and low weight.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
32
Amplifiers
Amplifiers
CX Series Amplifiers
CX 2-channel models
CX Series is a line of two, four and eight channel amplifiers designed for
installation applications requiring premium sound quality and high output.
Recognized by sound contractors worldwide for their reliability, CX Series
amplifiers feature PowerLight™ power supply technology reducing weight,
eliminating AC mains hum and improving audio quality. The highly efficient
power supply also draws less power and produces less heat resulting in
added energy savings. They also feature advanced amplifier control and
monitoring for Q-SYS™ Platform.
•Active inrush limiting gently brings amplifiers on-line eliminating the
need for costly AC power sequencers.
CX 4-channel models
CX 8-channel models
•Front-panel gain controls with 1 dB detents allow for precise level
adjustment and are protected by tamper-proof security covers.
Watts per channel
Model
70 V*
8Ω
4Ω
2Ω*
CX302V
250
–
–
–
•Selectable clip limiters and infra-sonic filters protect loudspeakers from
CX602V
440
550
–
–
CX1202V
1000
700
1100
–
•DataPort or EuroBlock Connector Inputs and touch-proof barrier-strip
CX302
–
200
325
600
CX502
–
300
500
800
CX702
–
425
700
1200
CX902
440
550
900
1500
CX1102
1000
700
1100
1700
CX204V
220
–
–
–
CX254
–
170
250
450
CX404
–
250
400†
–
CX108V
100
–
–
–
CX168
–
90
130
–
•DataPort connections enable remote control and monitoring of amplifier
functions via Q-SYS™.
damage due to distortion and overexcursion.
outputs (2 ch models also include XLR inputs and 8 channel models
feature EuroBlock Connector Outputs).
•Sleep (Standby) mode for energy saving efficiency.
•Transformer-less 70 /100 volt models available.
All channels driven. 20 Hz – 20 kHz, 0.05% THD *1 kHz, 0.05% THD
†1 kHz, 0.1% THD
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
33
34
Amplifiers
Amplifiers
PowerLight™ 3 Series Amplifiers
PowerLight 3 Series are our “Ultimate Analog” amplifiers, designed for the
most demanding concert and live-sound reinforcement applications. All
models (PL380 and PL340) feature the PowerLight™ power supply
technology reducing weight, eliminating AC mains hum and improving audio
quality. With zero signal latency with select QSC processors for seamless
integration and flawless loudspeaker alignment, the PowerLight 3 Series
architecture provides users the choice of comprehensive, networked remote
control, monitoring and DSP or the cost savings of a simple, straightforward
analog input configuration.
•Class D (PL380) and class H (PL340) topology provide efficient high
PL380
PL325 and PL340
Watts per channel
Model
8Ω
4Ω
2Ω
•Three-position Input Sensitivity switch simplifies integration of
PL340
800
1250
2000
PL380
1500
2500
4000*
•User defeatable clip limiters and selectable low-frequency filters
EIA 1 kHz, 1% THD
*Burst mode testing required due to AC service current limitations
power performance.
PowerLight 3 amplifiers into existing amp racks and power systems.
(30 Hz, 50 Hz, Bypass).
•DataPort connection supports external amplifier control.
•XLR and block input connectors and Binding post or Neutrik speakON®
Output connectors.
•Comprehensive internal protection protects amplifiers and loudspeakers
against over-current, over-temperature and clipping – without
compromising program signal.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
35
36
Amplifiers
37
Amplifiers
CMXa Series Amplifiers
CMXa Series amplifiers represent an economical and rugged power amplifier
solution for installed sound applications. There are four CMXa models to
choose from (CMX 300Va, CMX 500Va, CMX 800Va, and CMX 2000Va).
Flexible input and outputs connectors make them ideal for use in projects
such as performance halls, houses of worship, sport clubs, gymnasiums,
dance venues, pubs, and FGM/BGM systems. CMXa Series provides
unmatched performance and user options at an affordable price point.
•Flexible output loading options enable low impedance loads
comfortably down to 2Ω, and in some configurations will effortlessly
drive 70V /100V lines.
CMXa 2RU Models
CMX 2000Va (3RU Model)
•Recessed front panel gain controls with 1 dB detents for fast and
accurate level settings.
Watts per channel
•Security plate cover for gain controls to provide tamper-proof
protection.
•Recessed rear DIP switches for easy selection between stereo,
parallel, or bridged mode operation, and the additional choice of
enabling/disabling low frequency filter protection.
•Balanced XLR, TRS or Barrier Strip parallel inputs and NL4 or
detachable block output connectors.
Stereo
Model
Bridged
Stereo
Bridged
70V
100V
70V
100V
8Ω
4Ω
2Ω*
CMX 300Va
-
-
600
-
200
300
430
830
CMX 500Va
-
-
1200
600
300
500
700
1400
4Ω*
CMX 800Va
400
-
2000
2300
500
800
1200
2400
CMX 2000Va
2500
1000
-
3600
1100
2000
2500
5000
1 kHz, 0.1% THD *1 kHz, 1% THD
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
38
Amplifiers
39
Amplifiers
ISA Series
ISA Series amplifiers are an ideal, cost-effective solution for fixed
installation applications requiring distributed loudspeakers. There are seven
models in the line, four low impedance models (ISA 280, ISA 450, ISA
750, ISA 1350) rated down to 2-ohm loads and three “Ti” versions (ISA
300Ti, ISA 500Ti, ISA 800Ti) featuring isolated transformers for 25, 70
and 100 volt distributed audio systems. The DataPort V2 Lite connection
facilitates the use of amplifier accessories (XC-3, LF-3 and SF-3) providing
economical crossover and subwoofer filtering solutions.
•Up to 2400W total output power.
•3RU chassis with rear-mounted gain controls featuring 2 dB detents.
•Independent, defeatable clip limiters reduce distortion and protect
speakers.
•Selectable high-pass filters protect against transformer saturation
ISA 500Ti
Watts per channel
Model
70V* / 100V
8Ω**
4Ω**
2Ω†
ISA280
-
185
280
430
ISA450
-
260
425
700
ISA750
-
450
650
1200
ISA1350
1500††
800
1300
2000
ISA300Ti
300
185
280
430
ISA500Ti
500
260
425
700
ISA800Ti
800
450
650
1200
*50 Hz – 16 kHz, 0.5% THD **20 Hz – 20 kHz, 0.1% THD †1 kHz, 1% THD
††Direct Output, 70V, less than 0.1% THD, 20 Hz – 20 kHz, +0/-0.3 dB
and driver overexcursion.
•Includes extensive DC, infrasonic, thermal overload, and
short circuit protection.
•XLR and 3-pin block input connectors and touch-proof
barrier-strip outputs.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AcousticCoverage™ Series
Distributed Applications
Installation Value Series
LOUDSPEAKERS
AcousticDesign Series
TM
Distributed Applications
Installation Premium Series
AcousticPerformance Series
TM
Performance Applications
Installation Point-and-Shoot
ILA Series
Performance Applications
Installation Line Array
42
Loudspeakers
Loudspeakers
43
AcousticCoverage™ Series Loudspeakers
Ceiling-mount
AcousticCoverage™ Series is designed to offer integrators a cost
effective solution for applications where voice reinforced coverage is of
primary concern, while providing improved musicality often not seen in
typical BGM class products. Applications for AccousticCoverage Series
loudspeakers include wide area paging systems, background music,
distance conferencing reinforcement, healthcare facilities, concourses,
transportation terminals and more.
AC-C2T
AC-C4T
Frequency Range (-10 dB)
80 Hz – 20 kHz
70 Hz – 16 kHz
Power Capacity1
16 W
16 W
Broad-Band Sensitivity2
86.5 dB
89 dB
Coverage Angle
150° (500 Hz - 5 kHz)
140° (500 Hz - 5 kHz)
Output 3 (Peak SPL @ 1M)
104.5 dB
107 dB
Driver Information
2.5" Polypropylene cone
with butyl rubber surround
4.5" Polypropylene cone with butyl
rubber surround
Rated Impedance
8 ohm
8 ohm
Input Connectors
Euroblock connector with
parallel output terminals
Euroblock connector with parallel
output terminals
Baffle Material
Painted ABS polymer
Painted ABS polymer
Cut-out Dimension
Ø 7.3” (Ø 186 mm)
Ø 7.3” (Ø 186 mm)
Product Dimension
Ø 8.4” x 7.9”
(Ø 214 x 201 mm)
Ø 8.4” x 7.9”
(Ø 214 x 201 mm)
Net Weight
TBD
4.9 lbs / 2.22 kg
•High quality transducers provide exceptional clarity through the
critical voice range.
•Ported baffle for increased low frequency extension.
•Low saturation 70/100V transformers with 8 ohm bypass.
•4-pole Euroblock connector eases system wiring.
•Advanced voicing filter sets using Intrinsic Correction™ available
through either the Q-SYS™ Platform or CXD Series amplifiers.
•White (RAL 9010) with UV inhibitors to match complimenting
QSC loudspeaker series.
•Complete EASE, CAD & BIM information available online.
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
44
Loudspeakers
Loudspeakers
AcousticCoverage™ Series Loudspeakers
Ceiling-mount
Non-UL Versions
AC-C6T
AC-C8T
AC-C4T-NB
AC-C8T-NB
Frequency Range (-10 dB)
65 Hz – 20 kHz
52 Hz – 20 kHz
Frequency Range (-10 dB)
62 Hz – 18 kHz
53 Hz – 20 kHz
Power Capacity1
30 W
80 W
Power Capacity1
6W
6W
Broad-Band Sensitivity2
89 dB
89 dB
Broad-Band Sensitivity2
93 dB
96 dB
Coverage Angle
110° (500 Hz - 5 kHz)
100° (500 Hz - 5 kHz)
Coverage Angle
140° (500 Hz - 5 kHz)
130° (500 Hz - 5 kHz)
Output 3 (Peak SPL @ 1M)
110 dB
114 dB
Output 3 (Peak SPL @ 1M)
107 dB
110 dB
Driver Information
LF
LF: 6.5" Polypropylene cone
with butyl rubber surround
Driver Information
4" Treated paper cone
8" Treated paper cone
8" Treated paper cone
Rated Impedance
8 ohm
8 ohm
Input Connectors
Bare wire transformer taps
Bare wire transformer taps
Baffle Material
Painted ABS polymer
Painted ABS polymer
Cut-out Dimension
Ø 9” (Ø 228 mm)
Ø 11.06” (Ø 281 mm)
Product Dimension
Ø 10.25” x 5.8”
(Ø 260 x 148 mm)
Ø 12.3” x 4.2”
(Ø 313 x 107 mm)
Net Weight
2.6 lbs / 1.2 kg
3.4 lbs / 1.5 kg
HF
HF: 0.86" silk dome tweeter,
coaxially mounted
0.86” Silk dome tweeter
Rated Impedance
8 ohm
8 ohm
Input Connectors
Euroblock connector with parallel
output terminals
Euroblock connector with
parallel output terminals
Baffle Material
Painted ABS polymer
Painted ABS polymer
Cut-out Dimension
Ø 9” (Ø 229 mm)
Ø 11.2” (Ø 285 mm)
Product Dimension
Ø 10.24” x 8.4”
(Ø 260 x 213 mm)
Ø 12.4” x 11.3”
(Ø 316 x 288 mm)
Net Weight
7.6 lbs / 3.5 kg
11.5 lbs / 5.2 kg
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
1 IEC60268-1 noise signal for 2 Hrs.
2 O
n-Axis, free-field sensitivity, 2.83V, 1 m
3 C
alculated from rated noise voltage and sensitivity.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
45
46
Loudspeakers
Loudspeakers
47
AcousticDesign™ Series Loudspeakers
Ceiling-mount
The second generation of AcousticDesign™ Series ceiling-mount loudspeakers
are high quality 70/100V, two-way, full-range systems ideal for a wide variety
of foreground, background, paging, and distance-conferencing applications.
Designer Friendly:
•Available in white (RAL 9010) or black (RAL 9011).
•Paintable grill & bevel.
•Deliberate 23mm bezel width to match T-bar.
•Complete EASE, CLF, CAD & BIM information.
Application Diverse:
•UL Listed (UL 1480 / UL2043).
•EN54-24 for use in Voice Alarm Systems.
•UV Inhibitors in all white models.
•Powder coated grills.
•Weather-treated cones.
Install Ready
•SnapFit magnetic grills.
•Low saturation 70/100V transformers.
•16 ohm low impedance bypass.
•3x long-travel dog-ears.
•Screw-down Euro block connector with loop-through.
•Removable conduit cover with no loose screws.
•Low profile, short back-can versions available.
Factory Optimized:
•DMT (Directivity Matched Transition™): Ensures smooth, uniform
frequency response over the rated coverage area.
•Intrinsic Correction™: Factory voicings available of CXD amplifiers and
Q-SYS Designer Software - delivers repeatable performance from project
to project.
48
Loudspeakers
Loudspeakers
AcousticDesign™ Series Loudspeakers
Ceiling-mount
AD-C4T-BK
AD-C4T-WH
AD-C4T-LP
Frequency Range (-10 dB)
70 Hz – 20 kHz
70 Hz – 20 kHz
Frequency Range (-10 dB)
65 Hz – 20 kHz
65 Hz – 20 kHz
Power Capacity1
30 W
30 W
Power Capacity1
60 W
60 W
System Sensitivity2
87.5 dB
87 dB
System Sensitivity2
88 dB
88 dB
Coverage Angle
150° conical DMT
150° conical DMT
Coverage Angle
135° conical DMT
135° conical DMT
Output 3 (Peak SPL @ 1M)
108 dB
108 dB
Output3 (Peak SPL @ 1m)
112 dB
112 dB
4.5” weather resistant
paper cone woofer
4.5” weather resistant
paper cone woofer
6.5” weather resistant
paper cone woofer
6.5” weather resistant
paper cone woofer
0.75” aluminum dome
tweeter
0.75” aluminum dome tweeter
0.75” aluminum dome
tweeter
0.75” aluminum dome
tweeter
Driver Information
LF
HF
AD-C6T-BK
AD-C6T-WH
Driver Information
LF
HF
AD-C6T-LP
Rated Impedance
16 ohm
16 ohm
Rated Impedance
16 ohm
16 ohm
Input Connectors
4-pin Euro terminals
4-pin Euro terminals
Input Connectors
4-pin Euro terminals
4-pin Euro terminals
Cut-out Dimension
Ø 7.68” (Ø 195 mm)
Ø 9.65” (Ø 245 mm)
Cut-out Dimension
Ø 9.65” (Ø 245 mm)
Ø 12” (Ø 305 mm)
Product Dimension
Ø 9.06” x 6.93”
(Ø 230 x 176 mm)
Ø 11.02” x 3.93”
(Ø 280 x 100 mm)
Product Dimension
Ø 11.02” x 9.32”
(Ø 280 x 237 mm)
Ø 13.37” x 3.95 ”
(Ø 340 x 100 mm)
Net Weight
6.4 lb / 2.9 kg
6.6 lb / 3 kg
Net Weight
9.5 lb / 4.3 kg
9.3 lb / 4.2 kg
1 IEC60268-1 noise signal for 2 Hrs.
2 O
n-Axis, free-field sensitivity, 2.83V, 1 m
3 C
alculated from rated noise voltage and sensitivity.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
49
50
Loudspeakers
Loudspeakers
AcousticDesign™ Series Loudspeakers
Ceiling-mount
AD-C820R/S | AD-C821R/S
The AD-C820R/S and AD-C821R/S (R for Round Grill and S for Square
Grille) loudspeaker systems are designed for ceiling mounted loudspeaker
applications requiring high SPL output. The AD-C820R/S Systems ship with
the AD-C800BB backcan and are perfect for pre-installed applications.
The AD-C821R/S Systems incorporate a fully integrated, factory sealed
enclosure and use “dog-ear” style mounting - perfect for blind mount
installations. Both models also include a set of tile rails and C-rings to
complete the installation.
AD-C820/C821
Effective frequency range1
52 Hz – 18 kHz
Power Capacity1
200 W (100 hrs)
Sensitivity2
91 dB
Nominal Coverage
90° conical
Output 3 (Peak SPL @ 1M)
120 dB
Driver Information
LF
HF
•8" low-frequency woofer with 1.4" diaphragm coaxially-mounted
compression driver.
•52Hz – 18kHz frequency range.
•200W continuous power rating.
•90˚ conical coverage.
•70V/100V multi-tap transformer included with low impedance bypass.
•Ceramic input screw terminal complies with European safety standards.
•AD-C820 transducer/baffle assembly for separated backcan installation.
•AD-C821 designed as a fully integrated blind-mount system.
•UL listed (UL1480 and UL2043).
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
8" weather resistant,
treated cone woofer
1.4" co-axial compression driver
Rated Impedance
16 ohm
Input Connectors
AD-C820: Ceramic block
AD-C821: 4-pin Euroblock
Fire protective sub-chamber
Enclosure
UL-rated steel backcans
Net Weight (each)
17.5 lb / 7.9 kg
1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.
3 Calculated using specified power capacity and system sensitivity. 6 dB peakto-average signal ratio assumed.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
51
52
Loudspeakers
Loudspeakers
AD-C1200
The AD-C1200 loudspeaker system is designed for ceiling mounted
loudspeaker applications requiring high SPL output. The AD-C1200
features coaxial LF/HF transducers, a transformer and a crossover
network factory-mounted on a steel baffle. The baffle is designed to
mount to the QSC enclosure (AD-C1200BB) or to any 2.5' enclosure
using industry-standard transducer / baffle mounting points.
AD-C81Tw
28 Hz – 208 Hz
37 Hz – 18 kHz
Power Capacity 1
250 W (100 hrs)
300 W (100 hrs)
System Sensitivity 2
94 dB
93 dB
Coverage Angle
N/A
85° conical
Output 3 (Peak SPL @ 1M)
118 dB
124 dB
Driver Information
LF
HF
AD-C81Tw
The AD-C81Tw is a ceiling mounted subwoofer designed for use with both
ceiling-mount and surface mounts AcousticDesign loudspeakers. Like the
smaller format, full-range models, the AD-C81Tw utilizes dog-ear mounting
tabs and ships complete with C-rings and tile rails.
AD-C1200
Frequency Range (-10 dB)
8" weather resistant,
12" weather resistant,
polypropelene cone woofer, treated
rubber surround
cone woofer, 75 mm voice
coil, ferrite magnet
N/A
1.75" co-axial compression
driver
Rated Impedance
8 ohm
Input Connectors
Ceramic block or 4-pin Euro
Ceramic block terminals
terminals, fire protective
Fire protective sub-chamber
sub-chamber
16 ohm
Cut-out Dimension
Ø 11.65” (Ø 296 mm)
Product Dimension
Ø 12.6” x 14.8”
(Ø 321 x 377 mm)
Enclosure
Steel back can
Net Weight (each)
7.5 lb / 3.4 kg
78 lb / 35.3 kg
1 Continuous IEC specified test signal, 2 hours unless
otherwise stated.
2 Based on nominal impedance, measured in full space.
1 W @ 1 m.
3 Calculated using specified power capacity and system
sensitivity. 6 dB peak-to-average signal ratio assumed.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
53
54
Loudspeakers
Loudspeakers
AcousticDesign™ Series Loudspeakers
Pendant-mount
The all new line up of AcousticDesign™ Series pendant-mount loudspeakers
are high quality 70/100V, two-way, full-range systems ideal for a wide
variety of foreground and background business music applications.
Designer Friendly:
•Deliberately unobtrusive industrial design.
•Available in white (RAL 9010) or black (RAL 9011).
•Paintable enclosure and grill.
•Complete EASE, CLF, CAD & BIM information.
Application Diverse:
•Lightweight rugged ABS construction.
•UV Inhibitors in all white models.
•IP-54 rating for dust and splash resistance.
•Powder-coated grills and weather-treated cones.
Install Ready:
•SnapFit magnetic grills.
•Low saturation 70/100V transformers.
•16 ohm low impedance bypass.
•2x quick link wire assemblies with gripple fastener supplied.
•Screw-down Euro block connector with loop-through.
•Sealable input weather cup – keeps moisture away from wiring.
Factory Optimized:
•DMT (Directivity Matched Transition™): Ensures smooth, uniform
frequency response over the rated coverage area.
•Intrinsic Correction™: Factory voicings available for CXD Series
amplifiers and Q-SYS Designer Software - delivers repeatable
performance from
project to project.
55
56
Loudspeakers
Loudspeakers
57
AcousticDesign™ Series Loudspeakers
Pendant-mount
AD-P4T-BK
AD-P4T-WH
AD-P6T-BK
AD-P6T-WH
Effective frequency range1
70 Hz – 20 kHz
70 Hz – 20 kHz
Effective frequency range1
65 Hz – 20 kHz
65 Hz – 20 kHz
Power Capacity
30 W
30 W
Power Capacity
60 W
60 W
System Sensitivity
87.5 dB
87.5 dB
System Sensitivity
88 dB
88 dB
Coverage Angle
150° conical DMT
150° conical DMT
Coverage Angle
140° conical DMT
140° conical DMT
Output 4 (Peak SPL @ 1M)
108 dB
108 dB
Output 4 (Peak SPL @ 1M)
112 dB
112 dB
LF
4.5” weather resistant
paper cone woofer
4.5” weather resistant
paper cone woofer
LF
6.5” weather resistant
paper cone woofer
6.5” weather resistant
paper cone woofer
HF
0.75“ aluminum dome tweeter
0.75“ aluminum dome
tweeter
HF
0.75“ aluminum dome tweeter
0.75“ aluminum dome tweeter
Rated Impedance
16 ohm
16 ohm
Rated Impedance
16 ohm
16 ohm
Input Connectors
4-pin Euro terminals
4-pin Euro terminals
Input Connectors
4-pin Euro terminals
4-pin Euro terminals
Net Weight
6.5 lb / 2.9 kg
6.5 lb / 2.9 kg
Net Weight
9 lb / 4.1 kg
9 lb / 4.1 kg
Driver Information
Driver Information
1 Free-field, -10 dB from on-axis sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1 Free-field, -10 dB from on-axis sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
58
Loudspeakers
Loudspeakers
AcousticCoverage™ Series Loudspeakers
Surface-mount
AC-S6T
AC-S4T
AcousticCoverage Series is designed to offer integrators a cost effective
solution for applications where voice reinforced coverage is of primary
concern, while providing improved musicality often not seen in typical BGM
class products. Applications for AccousticCoverage speakers include wide
area paging systems, background music, distance conferencing reinforcement,
healthcare facilities, concourses, transportation terminals and more.
AC-S4T-BK
AC-S4T-WH
AC-S6T-BK
AC-S6T-WH
Frequency Range (-10 dB)
70 Hz – 20 kHz
60 Hz – 20 kHz
Power Capacity1
16 W
30 W
Broad-Band Sensitivity2
85 dB SPL
86 dB SPL
Coverage Angle
130° (500 Hz - 5 kHz)
130° (500 Hz - 5 kHz)
Output 3 (Peak SPL @ 1M)
103 dB
107 dB
Driver Information
4.5" polypropylene woofer
with 1" voice-coil
6.5" polypropylene woofer
with 1" voice-coil
Rated Impedance
8 ohm
8 ohm
Input Connectors
Euroblock connector with
parallel output terminals
Euroblock connector with parallel
output terminals
Baffle Material
Painted ABS polymer
Painted ABS polymer
Net Weight
5.2 lbs / 2.4 kg
8.3 lbs / 3.8 kg
™
•High quality transducers provide exceptional clarity through the critical
voice range.
•Ported baffle for increased low frequency extension.
•Low saturation 70/100V transformers with 8 ohm bypass.
•4-pole Euroblock connector eases system wiring.
•Advanced voicing filter sets using QSC’s Intrinsic Correction™ available
through either the Q-SYS Platform or CXD Series amplifiers.
™
•Spring-loaded and rotatable logo on grill for installation convenience in
1 IEC60268-1 noise signal for 2 Hrs.
2 On-Axis, free-field sensitivity, 2.83V, 1 m
3 Calculated from rated noise voltage and sensitivity.
either horizontal or vertical deployments.
•Complete EASE, CAD & BIM information available.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
59
60
Loudspeakers
Loudspeakers
AcousticDesign™ Series Loudspeakers
NEW Column Surface-mount
The all new AcousticDesign™ Series column surface-mount loudspeakers
are high quality 70/100V or 8 ohm bypass, full-range systems ideal for a
wide variety of foreground and background applications with
acoustically-challenged environments.
Designer Friendly:
•Deliberately unobtrusive industrial design.
•Available in white (RAL 9010) or black (RAL 9011).
•Paintable enclosure and grill.
•Complete EASE, CLF, CAD & BIM information.
61
AD-S802T
AD-S162T
Effective frequency range1
200 Hz - 17K Hz
200 Hz - 17K Hz
Power capacity2
120 W
240 W
System Sensitivity
89 dB
90 dB WIDE
92 dB NARROW
Coverage Angle
Horizontal (-6 dB)
150 deg (800 Hz - 5K Hz)
150 deg (1.2K Hz - 6K Hz) WIDE
150 deg (2K Hz - 6K Hz) NARROW
Coverage Angle
Vertical (-6 dB)
15 deg (3.5K Hz - 17K Hz)
30 deg (900 Hz - 17K Hz) WIDE
15 deg (1.5K Hz - 17K Hz) NARROW
Output4
(Peak SPL @ 1M)
116
120 dB wide
122 dB narrow
Driver Information
(x8) 2.5” weather resistant
paper cone woofer
(x16) 2.5” weather resistant paper
cone woofer
Rated Impedance
8 ohm
8 ohm
Input Connectors
4-pin Euro terminal
4-pin Euro terminal
Enclosure
Aluminum
Aluminum
Ingress protection
IP-54
IP-54
Net Weight
TBD
TBD
Check Footnote Accuracy.
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 Hrs
3 On-Axis, free-field sensitivity, 2.83V, 1 m
4 Calculated from rated noise voltage and sensitivity
Application Diverse:
•Rugged aluminum construction.
•UV Inhibitors in all white models.
•IP-54 rating for dust and splash resistance.
•Powder-coated grills and weather-treated cones.
Install Ready
•Close to wall pan/tilt bracket included.
•Low saturation 70/100V transformers.
•8 ohm low impedance bypass.
•Selectable broad/narrow beam contour (AD-S162T only).
•Screw-down Euro block connector with loop-through.
•Sealable input weather cup – keeps moisture away from wiring.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
62
Loudspeakers
Loudspeakers
AcousticDesign™ Series Loudspeakers
Indoor/Outdoor Surface-mount
The second generation of AcousticDesign™ Series surface-mount
loudspeakers are professional, 70/100V, two-way, full-range systems ideal
for a wide variety of foreground, background, ancillary and sound
reinforcement. Ease-of-installation was the driving principles behind these
new surface loudspeakers, culminating in the patented X-Mount™ wall
bracket with best-in-class functionality and repeatable angles.
Input terminal cover
Designer Friendly:
•Available in white (RAL 9010) or black (RAL 9011).
•Paintable grill & enclosure.
•Complete EASE, CLF, CAD & BIM information available now.
Application Diverse:
•IP-54 for dust and splash resistance.
•Lightweight rugged ABS construction with UV Inhibitors.
•Powder coated aluminum grills, X-Mount and treated hardware.
•Weather-treated cones.
Install Ready
•Patented X-Mount provides rapid deployment with repeatable angles.
•Low saturation 70/100V transformers (excluding S12/S112SW).
•8 ohm low impedance bypass.
•Euro block connector with loop-through.
•Sealable input weather cup - keeps moisture away from wiring.
•Optional yoke mount and M10 Kit-C for larger models (S8T/S10T/S12).
Patented X-Mount™ mounting system
Factory Optimized:
•DMT (Directivity Matched Transition™): Ensures smooth, uniform
frequency response over the rated coverage area
•Intrinsic Correction™: Factory voicings available of CXD series
amplifiers and Q-SYS Designer Software - delivers repeatable
performance from project to project
63
64
Loudspeakers
Loudspeakers
65
AcousticDesign™ Series Loudspeakers
Indoor/Outdoor Surface-mount
AD-S4T-BK
AD-S4T-WH
AD-S6T-BK
AD-S6T-WH
AD-S8T-BK
AD-S8T-WH
AD-S10T-BK
AD-S10T-WH
Effective frequency range1
70 kHz – 20 kHz
60 kHz – 20 kHz
Effective frequency range1
55 kHz – 20 kHz
50 Hz – 19 kHz
Power capacity2
50W
150W
Power capacity2
200W
250W
System sensitivity3
87 dB SPL
89 dB SPL
System sensitivity3
90 dB SPL
92 dB SPL
Coverage Angle (-6 dB)
120° conical DMT
105° conical DMT
Coverage Angle (-6 dB)
105° conical DMT
90° conical DMT
Output 4 (Peak SPL @ 1M)
110 dB
116 dB
Output 4 (Peak SPL @ 1M)
121 dB
122 dB
4.5" weather treated paper
cone woofer
6.5" weather treated paper
cone woofer
8" weather treated paper
cone woofer
10" weather treated paper cone
woofer, 2.5” / 64 mm voice-coil
0.75" silk dome tweeter /
0.75" voice-coil
1" silk dome tweeter /
1" voice-coil
1" exit / 1.4" voice-coil
compression driver
1" exit / 1.4" voice-coil
compression driver
Rated Impedance
8 ohm
8 ohm
Rated Impedance
8 ohm
8 ohm
Input Connectors
Euroblock connector with parallel output terminals
Input Connectors
Euroblock connector with parallel output terminals
Driver Information
LF
HF
Driver Information
LF
HF
Enclosure
Painted ABS polymer
Painted ABS polymer
Enclosure
Painted ABS polymer
Ingress protection
IP-54
IP-54
Ingress protection
IP-54
IP-54
Net Weight
6.5 lbs / 2.95 kg
13.6 lb / 6.2 kg
Net Weight
24.1 lbs / 11 kg
31 lbs / 15 kg
1
2
3
4
Free-field, -10 dB from on-axis sensitivity
IEC60268-1 noise signal for 2 Hrs
On-Axis, free-field sensitivity, 2.83V, 1 m
Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
1
2
3
4
Painted ABS polymer
Free-field, -10 dB from on-axis sensitivity
IEC60268-1 noise signal for 2 Hrs
On-Axis, free-field sensitivity, 2.83V, 1 m
Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
66
Loudspeakers
Loudspeakers
AcousticDesign™ Series Loudspeakers
Indoor/Outdoor Surface-mount
AD-S12-WH
AD-S12-BK
AD-S112sw
Effective frequency range1
52 Hz – 20 kHz
30 Hz - 135 Hz
Power capacity2
300W
300W
System sensitivity3
95 dB SPL
90 dB SPL
Coverage Angle (-6 dB)
75° conical DMT
N/A
Output 4 (Peak SPL @ 1M)
126 dB
121 dB
Driver Information
LF
HF
12" weather treated paper cone 12" weather treated paper cone
woofer, 2.5" / 64mm voice-coil woofer,
2.5" / 64mm voice coil
1" exit / 1.4" voice-coil
compression driver
Rated Impedance
8 ohm
Input Connectors
Euroblock connector with parallel output terminals
8 ohm
Enclosure
Painted ABS polymer
Painted ABS polymer
Ingress protection
IP-54
IP-54
Net Weight
35 lbs / 16 kg
29 lb / 13.2 kg
1
2
3
4
Free-field, -10 dB from on-axis sensitivity
IEC60268-1 noise signal for 2 Hrs
On-Axis, free-field sensitivity, 2.83V, 1 m
Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
AD-S10T with patented X-Mount™ mounting system
67
68
Loudspeakers
Loudspeakers
69
AcousticDesign™ Series Loudspeakers
Indoor/Outdoor Surface-mount
AD-S32T
Ideal for background and general purpose audio playback, the AD-S32T
loudspeaker offers a full sound in a surprisingly small package. For outdoor
applications, the plated screw input signal terminals can be sealed with the
included weather cover.
•Includes ball mount assembly and yoke mount.
•Enclosure is molded from high impact polystyrene (HiPS).
•Powder coated aluminum grill.
•Available in black or white.
•Sealable Input Weather Cup – keeps moisture away from wiring.
AD-S282H/AD-S282HT
For installations requiring additional low-frequency performance combined
with higher acoustical output, the dual 8-inch AD-S282H / AD-S282HT is an
ideal solution. The AD-S282H / AD-S282HT features contemporary styling
and is perfect for a variety of environments
and applications.
•Low impedance (AD-S282H) and 70/100
volt with 8 ohm bypass (AD-S282HT)
versions.
•Enclosure is molded from high impact
AD-S32T-BK
AD-S32T-WH
AD-S282H-BK
AD-S282H-WH
AD-S282H-BK
AD-S282H-WH
Frequency Range
(-10 dB)
65 Hz – 20 Hz
60 Hz – 20 kHz
60 Hz – 20 kHz
Power Capacity
30 W (100 hrs)
450 W (8 hrs)
450 W (8 hrs)
System Sensitivity
85 dB
93 dB
93 dB
Coverage Angle
100° conical
90°H x 60°V rotatable
90°H x 60°V rotatable
Output 1
(Peak SPL @ 1M)
105 dB
126 dB
126 dB
3" weather resistant,
poly-propylene cone
woofer
Dual 8" high-power
treated cone, 2" voice
coil, neodymium
magnet
Dual 8" high-power
treated cone, 2"voice
coil, neodymium
magnet
1" high output
compression driver
1" high output
compression driver
8 ohm
8 ohm
8 ohm
Input Connectors
Screw terminals
Barrier Strip
(switchable:
passive/bi-amp)
Barrier Strip
Enclosure
Injection molded, weather resistant high impact polystyrene
Net Weight
4 lb / 1.8 kg
Driver Information
LF
HF
Rated Impedance
0.75" neodymium
tweeter
27.7 lb / 12.6 kg
27.7 lb / 12.6 kg
1 2 hour rating using IEC60268 noise based on minimum impedance
2 Mid-band based on nominal impedance
polystyrene (HiPS).
•Powder coated aluminum grill.
•Available in black or white.
•Yoke bracket included.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
70
Loudspeakers
Loudspeakers
71
AcousticDesign™ Series AD-S28Tw Subwoofer
Surface-mount
Designed and acoustically matched for use with AcousticDesign™ Series
installation loudspeakers, the AD-S28Tw is a dual 8" surface mount
subwoofer that complements any of the ceiling-mount or surface-mount
AD Series full-range models. Efficient band-pass design features one
sealed chamber and a second, ported chamber that combine to produce
extended low frequency reproduction.
•Dual 8" weather resistant polypropylene woofers provide exceptional
resistance in high humidity environments.
•Bass extension down to 36Hz.
•Built-in, passive 120 Hz low-pass filter.
•70/100 volt multi-tap transformer with 8 ohm bypass.
•Marine grade plywood enclosure.
•Nickel plated screw terminals accept up to 12 AWG (2.053 mm2) wiring.
•Rubber feet allow floor or shelf deployment.
•Forged-shoulder eyebolts and steel yoke enable suspended
installation (included).
AD-S28Tw
Frequency Range1 (-10 dB)
36 Hz – 205 Hz
Power Capacity
250 W (2 hours IEC)
System Sensitivity
94 dB, 2.83 V, 1 m, half space (2π)
Output 2
2π (half space)
4π (full space)
124 dB SPL / 118 dB SPL
118 dB SPL / 112 dB SPL
Driver Information
Dual 8" (200 mm) weather resistant, polypropylene cone
woofers, rubber surround
Nominal Impedance
8 ohm
Input Connectors
4 position barrier strip; 2 in / 2 out
Enclosure
Marine-grade plywood
Environmental
Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC
60529 IP-X4 splash rating
Net Weight
43 lb / 19.5 kg
1 All frequency ranges specified refer to measured free field response.
2 Calculated SPL at 1m, speaker operating at rated RMS power with pink noise within
specified frequency range.
3 Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz – 20
kHz band limiting, 6 dB signal crest factor.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
72
Loudspeakers
73
Loudspeakers
AcousticPerformance™ Series Loudspeakers
Installation Point-and-Shoot
AcousticPerformance ™ is a line of professional loudspeakers ideally suited
for a wide variety of foreground sound reinforcement applications requiring
high sound pressure levels from an unobtrusive, stylish enclosure.
AcousticPerfromance ™ loudspeakers utilize DMT (Directivity Matched
Transition™), a design approach that matches HF waveguide to the natural
coverage angle of the woofer at the cross-over region. This innovation vastly
improves the loudspeakers power response resulting in smooth and
consistent coverage both on and off axis.
•DMT (Directivity Matched Transition™): Ensures smooth, coherent
power response across the listening plane.
AP-5102
AP-5122
Frequency Range (-10 dB)
60Hz – 18kHz
48Hz – 18kHz
Power Capacity
450W / 54V continuous
550W / 60V continuous
System Sensitivity
94dB, 1W@1m
95dB, 1W@1m
Coverage Angle
105˚ conical DMT
Output (Peak SPL @ 1M)
127 dB
128 dB
10” driver with 3" VC;
450W / 54V (2 Hrs)
12” driver with 4" VC;
450W / 60V (2 Hrs)
3" voice coil,
compression driver;
72W / 24V (2 Hrs)
3" voice coil,
compression driver;
72W / 24V (2 Hrs)
1
Driver Information
LF
HF
TM
90˚ conical DMT
TM
Rated Impedance
8 ohms
8 ohms
Input Connectors
Barrier Strip, NL4 connector
Barrier Strip, NL4 connector
•Clean industrial design: Unadorned grills compliment most decors
Enclosure
15-ply Baltic birch plywood
15-ply Baltic birch plywood
Net Weight
48 lb / 21.7 kg
65 lb / 29.5 kg
•16-guage powder coated steel grills.
•Complete EASE, CAD, and BIM information available online.
1 2 hour rating using IEC60268 noise based on minimum impedance
2 Mid-band based on nominal impedance
•M10 and yoke mount fittings: Offer flexible deployment options for a
variety of applications.
and settings.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
74
Loudspeakers
Loudspeakers
AcousticPerformance™ Series Loudspeakers
Installation Point-and-Shoot
AP-5152
AP-5122m
AP-4122m
AP-212sw
Frequency Range (-10 dB)
44Hz – 18kHz
55Hz – 18kHz
Frequency Range (-10 dB)
50Hz – 18kHz
35Hz – 250kHz
Power Capacity
625W / 65V continuous
550W / 60V continuous
Power Capacity
400W / 40V continuous
600W / 49V continuous
System Sensitivity
96dB, 1W@1m
95dB, 1W@1m
System Sensitivity
96dB, 1W@1m
93dB, 1W@1m
Coverage Angle
75˚ conical DMT
90˚ conical DMT
Coverage Angle
90˚ conical DMT
128 dB
Output 1 (Peak SPL
@ 1M)
128 dB
127 dB
12" driver with 2.5" VC
2 x 12” driver with weather
treated cone woofer
Output 1 (Peak SPL
@ 1M)
Driver Information
LF
129 dB
15" driver with 4" VC; 525W /
65V (2 Hrs)
12" driver with 102 mm (4") VC;
450W / 60V (2 Hrs)
3" voice coil,
compression driver;
72W / 24V (2 Hrs)
3" voice coil,
compression driver;
72W / 24V (2 Hrs)
Rated Impedance
8 ohms
8 ohms
Input Connectors
Barrier Strip, NL4 connector
Barrier Strip, NL4 connector
Enclosure
15-ply Baltic birch plywood
15-ply Baltic birch plywood
Net Weight
80 lb / 36.2 kg
63 lb / 28.3 kg
HF
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Driver Information
LF
HF
TM
1” compression driver
with 1.75” VC
NA
Rated Impedance
4 ohms
4 ohms
Input Connectors
Barrier Strip, NL4 connector
Barrier Strip, NL4 connector
Enclosure
15-ply Baltic birch plywood
15-ply Baltic birch plywood
Net Weight
39.7 lb / 18.1 kg
65.4 lb / 29.7 kg
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
75
76
Loudspeakers
Loudspeakers
77
ILA Series
Installation Line Array
WL2082-i
•Dual 8" diameter low-frequency drivers.
•Dual 1.75" voice coil diameter, neodymium compression drivers with
titanium domes.
•Patented* multiple aperture diffraction waveguide that provides extremely
wide coverage (140º).
•Available in black or white and constructed from high impact polystyrene.
•May be used in outdoor applications where the system is not directly
exposed to the elements.
WL2082-i
Frequency Range (-10 dB)
WL2082-i with WL118-sw
using EB2082-i extension
bar and FB2082-i fly-bar.
Designed for installation applications while retaining the performance of
high-end touring line array systems, the ILA System takes this concept and
builds on it by offering a complete and accessible solution consisting of
processing, amplification, line array, subwoofer and suspension accessories.
Built around the WL2082-i line array element, the system offers both flying
(WL118-sw) or ground-stacked (GP118-sw) subwoofer options.
68 Hz – 22 kHz
Nominal Coverage
140° H
Peak Output2
132 dB
Power Handling1
HF
LF / MF / Bi-amp
Tri-amp
100 W
400 W
200 W + 200 W
Driver Information
LF
HF
2 x 8" transducers; 2" voice coil; neodymium magnet
2 x 1.75" titanium diaphragm, neodymium magnet
Input Connectors
2 x NL8 in parallel
Enclosure
HiPS
Net Weight (each)
37 lb / 16.8 kg
1 Continuous IEC specified test signal, 2 hours.
2 Calculated at 1 m using power capacity and system sensitivity.
6 dB peak-to-average signal ratio assumed.
*Patent No. 7,177,437
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
78
Loudspeakers
Loudspeakers
ILA Series
Installation Line Array
GP118-sw
GP118-sw Subwoofer
•18" diameter low-frequency driver.
•850W continuous power handling.
•Performance down to 29Hz.
•Integrated M10 suspension points.
•M20 threaded pole mount.
•Available in black or white and housed in a birch plywood enclosure.
WL118-sw Subwoofer
•18” diameter low-frequency driver.
•850W continuous power handling.
•Performance down to 29Hz.
•Flyable on top or behind an ILA array.
•Available in black or white and housed in a Birch plywood enclosure.
Frequency Range (-10 dB)
GP118-sw
WL118-sw
29 Hz – 800 Hz
29 Hz – 800 Hz
Nominal Coverage
N/A
N/A
Peak Output2
134.5 dB
134.5 dB
Power Handling 1
SUB
850 W
850 W
Driver Information
LF
HF
18" transducer, 4" voice coil, ferrite magnet
N/A
Input Connectors
2 x NL8 in parallel and 2 x NL4 in parallel
Enclosure
Premium Birch Plywood
Net Weight (each)
107 lb / 48.5 kg
111 lb / 50.4 kg
1 Continuous IEC specified test signal, 2 hours.
2 Calculated at 1 m using power capacity and system sensitivity.
6 dB peak-to-average signal ratio assumed.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
79
80
Loudspeakers
Loudspeakers
K.2 Series Powered Loudspeakers
Portable/Production & Installed Sound
K8.2
55 Hz – 20 kHz
50 Hz – 20 kHz
Nominal Coverage (-6 dB)
105° conical DMT
90° conical DMT
Output 1 (Peak SPL @ 1M)
128 dB
130 dB
Amplifier Power
2000 W continuous Class D
2000 W continuous Class D
Current Consumption
1/8 Power 2
100 VAC, 2.1 A • 120 VAC, 1.9 A • 230 VAC, 1.1 A
Driver Information
LF
HF
Input Connectors
K.2 Series loudspeakers feature an all new 2,000 watt, Class D power
module and onboard DSP that deliver levels of sonic clarity and total output
that exceeds expectations for systems of this size and weight. With three
full-range models in the line (K8.2, K10.2 and K12.2) users can select a
model based on desired coverage angle for the application.
•Balanced Line Level Combo XLR /1/4” TRS Inputs.
•User adjustable EQ, delay and crossover.
•Default plus ten factory preset contours.
•Intrinsic Correction™ ensures a flat sonic response.
•Integrated M10 suspension points on full range models.
•Cloth-backed grills provide a more refined look.
•Optional K.2 LOC (Lock-Out Cover) prevents tampering
after installation.
K10.2
Frequency Range (-10 dB)
8" cone transducer
1.4" Titanium diaphragm
compression driver
10" cone transducer
1.4" Titanium diaphragm
compression driver
Balanced female XLR / 1/4” MIC/LINE level input • Balanced
female XLR / 1/4” HI-Z/LINE level input • 1/8” TRS Mini-Jack
Enclosure
Impact-resistant ABS
Impact-resistant ABS
Net Weight
27 lb / 12.2 kg
32 lb / 14.5 kg
K12.2
Frequency Range (-10 dB)
45 Hz – 20 kHz
Nominal Coverage (-6 dB)
75° conical DMT
Output 1 (Peak SPL
@ 1M)
132 dB
Amplifier Power
2000 W continuous Class D
Current Consumption
1/8 Power 2
100 VAC, 2.1 A • 120 VAC, 1.9 A • 230 VAC, 1.1 A
Driver Information
LF
HF
12" cone transducer
1.4" Titanium diaphragm compression driver
Input Connectors
Balanced female XLR / 1/4" MIC/LINE level input • Balanced
female XLR / 1/4" HI-Z/LINE level input • 1/8" TRS Mini-Jack
Enclosure
Impact-resistant ABS
Net Weight
39 lb / 17.7 kg
•Optional Yoke Mounts support horizontal or vertical deployment.
•Complete EASE and CAD library available online.
1 Measured on-axis at 1 m, using pink noise with a crest factor of 10 dB
2 1/8th power is representative of current draw with typical music program material
with occasional clipping.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
81
82
Loudspeakers
Rear
KS212C Cardioid Subwoofer
Typical
Subwoofer
Energy
Dispersion
Most subwoofers
radiate energy around
the entire enclosure,
leading to undesirable
LF build-up on stage
and wasted energy
around the sides and
rear of the system.
Front
The KS212C Cardioid Subwoofer represents the world’s first-in-class
single-box powered cardioid subwoofer solution for installation applications.
A breakthrough in innovation and design, the KS212C Cardioid Subwoofer
uniquely provides all the benefits of cardioid deployment in a single, compact
enclosure, “keeping bass in its place” for modestly-sized performance
venues, the KS212C Cardioid Subwoofer is unparalleled in its ability to
manage low frequencies on stage, or anywhere that excessive noise behind
the stage would be undesirable.
Rear
-15 dB
Powered by a 3,600 watt Class D amplifier, processed with the latest DSP
technology, and featuring dual 12-inch long excursion drivers each arranged
in a 6th order bandpass chamber, these components all combine seamlessly
to produce a staggering 15 dB more output at the front of the cabinet than at
the rear. Highly portable, the cabinet features. Two M20 sockets which
accepts a 35mm speaker pole in other horizontal or vertical orientation.
Shipping Fall-2017
(Additional specifications to be announced)
Front
Cardioid
Subwoofer
Energy
Dispersion
With -15 dB less energy
radiating from the rear
than the front, the
KS212C Cardioid
Subwoofer is
unparalleled in its ability
to manage low
frequencies on the stage,
as well as outdoors or
any application where
undesirable low
frequency energy needs
to be minimized.
84
Loudspeakers
Loudspeakers
KW Series Active Loudspeakers
Portable/Production & Installed Sound
KW122
50 Hz – 20 kHz
43.7 Hz – 20 kHz
Nominal Coverage (-6 dB)
75° conical
60° conical
Output 1 (Peak SPL @ 1M)
131 dB
133 dB
Amplifier Power
1000 W continuous Class D
1000 W continuous Class D
Current Consumption
1/8 Power 2
100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A
Input Connectors
Built on the highly successful K Series platform, KW Series loudspeakers
feature a 1,000 watt, Class D power module with onboard DSP housed in all
birch wooden enclosures that deliver superior levels of sonic clarity and total
output. With three full-range models in the line (KW122, KW152 and
KW153) plus a subwoofer (KW181), users can select a model based on
desired coverage angle for optimum performance.
•Combo XLR /1/4" TRS inputs.
•Variable mic/line input gain.
•Direct thru-puts and balanced summed output.
•Integrated M10 suspension points on full range models.
•DEEP™ provides extended low-frequency performance.
•Intrinsic Correction™ ensures a flat sonic response.
•All birch plywood enclosures.
•On-board mixing of up to three audio sources.
KW152
Frequency Range (-10 dB)
Driver Information
LF
HF
12" cone transducer
1.75" diaphragm
compression driver
15" cone transducer
1.75" diaphragm
compression driver
Balanced female XLR / 1/4" mic/line level input
Balanced female XLR / 1/4" line level input
Enclosure
Painted Birch Plywood
Painted Birch Plywood
Net Weight
49 lb / 22.2 kg
64 lb / 29 kg
KW153
KW181
Frequency Range (-10 dB)
33 Hz – 20 kHz
34 Hz – 143 Hz
Nominal Coverage (-6 dB)
75° conical
N/A
Output 1 (Peak SPL @ 1M)
131 dB
130 dB
Amplifier Power
1000 W continuous Class D
1000 W continuous Class D
Current Consumption
1/8 Power 2
100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A
Driver Information
LF
MF
HF
85
15" cone transducer
18" cone transducer
6.5" mid range cone transducer N/A
1.75" diaphragm
N/A
compression driver
Input Connectors
Balanced female XLR / 1/4"
mic/line level input • Balanced
female XLR / 1/4" line level
input •
Dual balanced female XLR /
1/4" line level input
Enclosure
Painted Birch Plywood
Painted Birch Plywood
Net Weight
41 lb / 18.6 kg
74 lb / 33.6 kg
1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for
LF-only and subwoofer systems) and peak power capability of amplifier.
2 1/8 power is representative of current draw with typical music program material with
occasional clipping.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
86
Loudspeakers
Loudspeakers
87
KLA Series Active Loudspeakers
Portable/Production & Installed Sound
•Available in Black or White.
•1,000 Watt Class D power module.
•Balanced XLR Input with loop thru.
•90˚ x 18˚ coverage (each enclosure).
•Integrated M10 suspension points.
•Integrated, easy-to-use rigging hardware allows for quick deployment.
•Ar-Q™ (Arcuate Equalization) enables quick tuning of an array with the
click of a switch.
•DEEP™ provides extended low-frequency performance.
•Intrinsic Correction™ ensures a flat sonic response.
•KLA12 features an ABS enclosure and KLA181 features a
birch enclosure.
KLA12
KLA181
Frequency Range
(-10 dB)
44 Hz – 20 kHz
33 Hz
Nominal Coverage
(-6 dB)
90 x 18 degree
N/A
Output
(Peak SPL @ 1M)
131 dB
135 dB
Amplifier Power
500 W x 500 W continuous
1000 W continuous Class D
Current Consumption
1/8 Power 2
100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A
1
The KLA Series brings the power and sophistication of a line array system
into an easy-to-use product, significantly redefining the line array product
category. With its simple “Lift, Click and Play” approach, KLA can be
deployed in a fraction of the time required by comparable installation line
array products. This fixed arcuate, active line array system is ideal for a wide
range of permanently installed applications ranging from performance
venues to houses of worship or other venues where a line array system
is desired.
Transducers
LF
HF
Input Connectors
12" cone transducer
1.75" diaphragm
compression driver
18" cone transducer
N/A
Balanced female XLR line level input
Enclosure
Impact resistant ABS
Painted birch plywood
Net Weight
55 lbs / 25.0 kg
104 lbs / 47.2 kg
1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for
LF-only and subwoofer systems) and peak power capability of amplifier.
2 1/8 power is representative of current draw with typical music program material with
occasional clipping.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
88
Loudspeakers
Loudspeakers
K Family Accessories
Available K.2 Series Accessories
•K8.2 Yoke
•K10.2 Yoke
•K12.2 Yoke
•K.2 LOC
•M10 Kit-C
K.2 Yoke Mount
Available KW Series Accessories
M10 Kit-C
•M10 Kit-W
•KW Suspension Kit 122
AF12 Array Frame
Available KLA Series Accessories
•KLA AF12 Array Frame
•M10 Kit-C
•KLA181 M10 KIT
K.2 LOC
KLA AF12 Array Frame
89
90
Mixers
DIGITAL MIXERS
Mixers
91
92
Mixers
Mixers
93
TouchMix™ Series
Compact Digital Mixers
TouchMix™-8
TouchMix™-30 Pro
TouchMix™-16
Fast, Professional Results
TouchMix features a comprehensive library of Channel Presets designed
specifically for the unique requirements of live reinforcement for music and
speech. Created utilizing all types of instruments, popular microphones and
pickups as well as multiple types of speaker systems, these presets help the
user achieve great results quickly. Effects and Gain Wizards further assist
the user in achieving great results quickly. All models feature powerful and
intuitive Anti-Feedback and Room Tuning Wizards as well as two real-time
analyzers (RTA).
The TouchMix™ Series stands as the perfect complement to any installation
that might have live performance needs, going Beyond Mixing™ to deliver
amazing results to users at all levels of experience. For live sound
professionals, TouchMix has everything you would want and expect in an
advanced, world- class mixing console — in a package small enough fit in
constrained spaces. For more casual users TouchMix Presets, Wizards and
Simple Modes help you get a professional mix quickly and easily.
“Big Mixer” Features and Specifications
TouchMix Series “no asterisk” specifications include 4-band, fully parametric
EQ with variable hi- and lo-pass filters, as well as comprehensive dynamics
processing on each input channel. Four mix busses feed four internal
professional, digital effects processors (six busses and six processors on
TM-30). Comprehensive dynamics, graphic EQ, hi-pass, lo-pass and notch
filters and delay are available on both the main and aux outputs and there
are 8 DCA groups with mutes as well as 8 mute groups. The TouchMix-30
Pro additionally offers 8 Sub groups with their own extensive processing as
well as a Patch Matrix for “multing” of inputs and a powerful copy-and-paste
function. With 4/10/14 Aux output channels (TM-8/16/30), TouchMix also
has ample stage monitor mixing capability and all models have the ability to
drive wired stereo in-ear monitors directly.
TouchMix’s
Professionally
Designed Preset
Library
Compact and Complete
The TouchMix Series models are completely self-contained and require no
external PC or video display. The graphic, color touch-screen (multi-touch on
TM-30) provides access to all mix parameters along with a physical rotary
encoder and hardware buttons for fast and precise touch-and-turn
operation. The available Remote Control App for iOS and Android phones
and tablets controls mixer parameters wirelessly. An included USB Wi-Fi
adapter (TM-8/16) creates the network connection between the mixer and
the hand-held device while wired or wireless connection to an external or
infrastructure router is also supported. All mixers are capable of direct,
multi-track recording to an external USB hard drive. Tracks may be mixed
directly on the mixer or transferred to a DAW. The TM-30 also serves as a
32-channel interface for DAW software running on Mac® computers.
TM-8/16 also ship complete in their own padded carrying case for transport
and protection and rack kits are available for all models.
94
Mixers
Mixers
95
TouchMix™ Series
Compact Digital Mixers
TouchMix-30 Pro
TouchMix-16
TouchMix-8
10" (254 mm), 1024 x 600 pixel, color TFT,
capacitive multi-touch sensing
6.1" × 3.5" (156 mm × 90 mm), color TFT,
touch sensing
6.1" × 3.5" (156 mm × 90 mm) color TFT, touch
sensing
Inputs
Total
Mic/Line
Line
USB MP3 Playback
Talkback
32
24 (20 XLR, 4 XLR combo)
6 (1/4" TRS + top panel 1/8" (3.5 mm) TRS)
Stereo
1 (XLR with 48 V)
22
16 (12 XLR, 4 XLR combo)
2 Stereo (1/4" TRS)
Stereo
1 (XLR)
14
8 (4 XLR, 4 XLR combo)
2 Stereo (1/4" TRS)
Stereo
N/A
Outputs
Total Mix Outputs
Main L/R
Aux
In Ear Monitor (Stereo)
Cue (Stereo)
Monitor (Stereo)
16
2 (XLR)
14 (XLR)
2 (1/4" TRS from Auxes 11/12 and 13/14)
1 (1/4" TRS)
2 (XLR)
12
2 (XLR)
6 (XLR), 2 (Stereo, 1/4" TRS)
2 (1/4" TRS from Auxes 7/8 and 9/10)
1 (1/4" TRS)
1 (1/4" TRS)
6
2 (XLR)
4 (XLR)
1 (1/4" TRS from Auxes 3/4)
1 (1/4" TRS)
N/A
4-band Parametric EQ with Hi/Low Shelving Option,
Variable 24 dB/octave HPF and LPF
Gate and Compressor
100 msec.
4-band Parametric EQ with Hi/Low Shelving
Option, Variable 24 dB/octave HPF and LPF
Gate and Compressor
100 msec.
4-band Parametric EQ with Hi/Low Shelving Option,
Variable 24 dB/octave HPF and LPF
Gate and Compressor
100 msec.
Output Channel Processing
1/3 Octave GEQ
Parametric EQ
Notch Filters
Other
Main L/R, Aux 1-14
Main L/R, Aux 1-14
12 bands, all outputs
100 msec Delay/Limiter/HPF/LPF, all outputs
Main L/R, Aux 1-6
Auxes 7/8 and 9/10
6 bands, all outputs
100 msec Delay/Limiter/HPF/LPF, all outputs
Main L/R, Aux 1-4
N/A
6 bands, all outputs
100 msec Delay/Limiter/HPF/LPF, all outputv
Sub Group Processing
6-band PEQ, HPF, LPF, Limiter
N/A
N/A
Recording / Playback
USB MTR Direct to Hard Drive
DAW Computer Interface
Stereo MP3
32 x 32
32 x 32 (Core Audio, Mac OS only)
Playback from USB
22 x 22
N/A
Playback from USB
14 x 14
N/A
Playback from USB
Groups
8 DCA, 8 Mute, 8 Subgroups
8 DCA, 8 Mute
8 DCA, 8 Mute
Cue
Selectable. AFL, PFL, Solo in Place
Selectable. AFL, PFL
Selectable. AFL, PFL
Effects
6 Effects Engines (Reverb, Echo, Delay,
Chorus, Pitch Shift), 1 Pitch Correct
4 Effects Engines (Reverb, Echo, Delay,
Chorus, Pitch Shift), 1 Pitch Correct
4 Effects Engines (Reverb, Echo, Delay,
Chorus, Pitch Shift), 1 Pitch Correct
Real Time Analyzer
2 x 1/3 octave
1 x 1/3 octave
1 x 1/3 octave
Preset Memory
99 User Scenes/Presets, 120 Factory Presets
99 User Scenes/Presets, 120 Factory Presets
99 User Scenes/Presets, 120 Factory Presets
External Control
TouchMix Control app for iPad/Android
controls all mixer functions via Wi-Fi
TouchMix Control app for iPad/Android
controls all mixer functions via Wi-Fi
TouchMix Control app for iPad/Android
controls all mixer functions via Wi-Fi
Wi-Fi
USB Wi-Fi router or Wi-Fi dongle (not included)
Wi-Fi router (with USB-to-Ethernet adapter)
or included Wi-Fi dongle
Wi-Fi router (with USB-to-Ethernet adapter)
or included Wi-Fi dongle
Mixer Dimensions (HWD)
7.5" x 16.9" x 18.1" (19 cm x 42.9 cm x 46 cm)
2.3" x 14.2" x 11.5" (5.8 cm x 36.0 cm x 29.1 cm)
2.2" x 13.1" x 9.6" (5.6 cm x 33.3 cm x 24.5 cm)
Weight
17.5 lb (7.9 kg)
5.9 lb (2.98 kg)
4.3 lb (1.95 kg)
Power Requirements
100-240 VAC, 50-60 Hz
100-240 VAC, 50-60 Hz
100-240 VAC, 50-60 Hz
Sampling Frequency
Selectable 44.1 kHz or 48 kHz
Selectable 44.1 kHz or 48 kHz
Selectable 44.1 kHz or 48 kHz
THD
<0.005%, +4 dBu; 20 Hz-20 kHz, unity gain,
any input to any output
<0.005%, +4 dBu; 20 Hz-20 kHz, unity gain,
any input to any output
<0.005%, +4 dBu; 20 Hz-20 kHz, unity gain,
any input to any output
Display
Input Channel Processing
Equalization
Dynamics
Delay
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
96
Amplifiers
qsc.com/systems
5-19-2017 ©2017 QSC, LLC, all rights reserved. QSC, the
QSC logo, PowerLight, Q-SYS, are registered trademarks of
QSC, LLC, in the US and other countries. FAST, X-Mount,
DMT, AcousticDesign, and Intrinsic Correction, are trademarks of QSC,
LLC. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
CobraNet is a trademark of Cirrus Logic. Skype for Business™ is a trade mark of Skype is not affiliated,
sponsored, authorised or otherwise associated by/with the Skype group of companies. GotoMeeting™
are either registered trademarks or trademarks of Citrix Systems, Inc. in the United States and/or
other countries. Dante is a trademarks of Audinate Pty Ltd. PowerCON and Speakon are trademarks
of Neutrik. All trademarks are the property of their respective owners. Multiple aperture diffraction slot
waveguide US Patent number 7177437. Other patents may apply or be pending.
Open as PDF
Similar pages