High Voltage Differential Probes P5200 P5205 P5210

®
Advanced Test Equipment Rentals
E stablished 1981
www.atecorp.com 800-404-ATEC (2832)
High Voltage Differential Probes
P5200 • P5205 • P5210
Features & Benefits
Bandwidths Up to 100 MHz
Up to 5,600 V Differential
(DC + pk AC)
Up to 2,200 V Common (RMS)
Overrange Indicator
Safety Certified
Switchable Attenuation
Switchable Bandwidth Limit
Applications
Floating Measurements
Switching Power Supply Design
Motor Drive Design
Electronic Ballast Design
CRT Display Design
Power Converter Design
and Service
Power Device Evaluation
P5205.
The P5200 can be used with any oscilloscope and enables users to safely make
measurements of floating circuits with their
oscilloscope grounded. The P5200 Active
Differential Probe converts floating signals
to low-voltage ground referenced signals
that can be displayed safely and easily on
any ground referenced oscilloscope.
WARNING: For safe operation, do not use
the P5200 High Voltage Differential Probe
with oscilloscopes that have floating inputs
(isolated inputs), such as the Tektronix
TPS2000 Series oscilloscopes and
THS700 Series oscilloscopes. The P5200
High Voltage Differential Probe requires
an oscilloscope or other measurement
instrument with grounded inputs.
The P5210 is a Differential Probe that is
capable of measuring floating voltages up
to 5,600 V (DC +pk AC) safely and has
a bandwidth up to 50 MHz. It is supplied
with two sizes of hook tips and has an
P5200.
P5210.
High Voltage Differential Probes
P5200 • P5205 • P5210
overrange visual and audible indicator
which warns the user when they are
exceeding the linear range of the probe. It
can be used with Tektronix TEKPROBE™
interface oscilloscopes directly or with any
oscilloscope with the use of the 1103
TEKPROBE® Power Supply.
The P5205 is a 100 MHz Active Differential
Probe capable of measuring fast rise times
of signals in floating circuits. This 1,300 V
differential probe can measure safely
voltages in IGBT circuits such as motor
drives or power converters. It is specifically
designed to operate on Tektronix oscilloscopes with TEKPROBE interface.
Characteristics
Specifications
Bandwidth (–3 dB)
Differential Mode Voltage
(RMS or DC) (between positive
and negative input leads)
Differential Mode Voltage
(Peak)*1 (between positive
and negative input leads)
Common Mode Voltage (RMS or DC
+ Pk AC) (between positive lead and
ground or negative lead and ground)
Attenuation (switchable)
CMRR at 60 Hz/1 MHz (typical)
P5200
P5205
P5210
25 MHz
100 MHz
50 MHz
1000 V CAT II
1000 V CAT II
4400 V
1300 V
1300 V
5600 V
1000 V CAT II
600 V CAT III
1000 V CAT II
600 V CAT III
2200 V CAT II
1000 V CAT III
50X/500X
50X/500X
100X/1000X
80 dB/50 dB
80 dB/50 dB
80 dB/50 dB
Input R (each input)
4 MΩ
4 MΩ
8 MΩ
Input C (each input)
7 pF
7 pF
7 pF
TEKPROBE Power Supply
TEKPROBE Power Supply
Power Source
AC wall adapter
Safety (all)
Compatible Products
UL3111-1/CSA1010.1/CSA1010.2.031/IEC61010-2-031/EN61010-2-031
All*3
TDS400/500/600/700/
TDS3000B/5000B/6000B*2/7000B*2/
CSA7000B*2 and 11000 Series
TDS400/500/600/700/
TDS3000B/5000B/6000B*2/7000B*2/
CSA7000B*2 and 11000 Series
*1
The RMS value of the waveform shall not exceed the Common Mode Voltage (RMS) for either lead.
*2
TDS7154B, TDS7254B, TDS7404B, TDS6404, TDS6604, CSA7154, and CSA7404B require a TCA-1MEG Buffer Amplifier.
*3
WARNING: For safe operation, do not use the P5200 High Voltage Differential Probe with oscilloscopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 series oscilloscopes
and THS700 series oscilloscopes. The P5200 High Voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.
2
High Voltage Differential Probes • www.tektronix.com/accessories
High Voltage Differential Probes
P5200 • P5205 • P5210
P5200.
Ordering Information
P5200
Active Differential Probe.
Includes: 2 crocodile clips; 2 plunger clips;
9 V DC power supply; manual (070-9018-01).
Please specify power cord when ordering.
Power Plug Options
(P5200 Only)
Opt. A0 – US Plug, 115 V, 60 Hz.
Opt. A1 – Euro Plug, 220 V, 50 Hz.
Opt. A2 – UK Plug, 240 V, 50 Hz.
Opt. A3 – Australia Plug, 240 V, 50 Hz.
Opt. A5 – Switzerland Plug, 220 V, 50 Hz.
Opt. A6 – Japan Plug, 100 V, 110/120 Volt, 60 Hz.
P5205.
P5210
Active Differential Probe.
Includes: 2 each large hook clips; 2 each small
hook clips; 2 each probe heads; soft case; manual
(070-9841-01).
P5210.
Accessory pack
(P5200, P5205)
Order 020-2140-00.
Includes: 2 each extender leads; 2 each lead
adapters; 2 each plunger hook clips.
Service
Accessory Pack (P5210)
Opt. C3 – Calibration Service 3 Years.
Opt. C5 – Calibration Service 5 Years.
Opt. D1 – Calibration Data Report.
Opt. D3 – Calibration Data Report 3 Years
(with Opt. C3).
Opt. D5 – Calibration Data Report 5 Years
(with Opt. C5).
Opt. R3 – Repair Service 3 Years.
Opt. R5 – Repair Service 5 Years.
Please see the Customer Support page.
Order 020-2195-00.
Includes: 2 each large hook clips; 2 each small
hook clips; 2 each probe heads.
Soft case
Order 016-1461-00.
Power Supply (P5205,
P5210 only)
TEKPROBE® Power Supply. Order 1103.
P5205
Active Differential Probe.
Includes: 2 each plunger clamps; 2 each crocodile
clips; 2 each extender leads; 2 each lead adapters;
2 each plunger hook clips; soft case; manual
(070-9472-01).
Accessory Pack
(P5200, P5205)
Order 020-2106-00.
Includes: 2 each plunger clamps; 2 each
crocodile clips.
High Voltage Differential Probes • www.tektronix.com/accessories
3
High Voltage Differential Probes
Contact Tektronix:
ASEAN / Australasia / Pakistan (65) 6356 3900
P5200 • P5205 • P5210
Austria +41 52 675 3777
Balkan, Israel, South Africa and other ISE Countries +41 52 675 3777
Belgium 07 81 60166
Brazil & South America 55 (11) 3741-8360
Canada 1 (800) 661-5625
Central East Europe, Ukraine and the Baltics +41 52 675 3777
Central Europe & Greece +41 52 675 3777
Denmark +45 80 88 1401
Finland +41 52 675 3777
France & North Africa +33 (0) 1 69 86 81 81
Germany +49 (221) 94 77 400
Hong Kong (852) 2585-6688
India (91) 80-22275577
Italy +39 (02) 25086 1
Japan 81 (3) 6714-3010
Luxembourg +44 (0) 1344 392400
Mexico, Central America & Caribbean 52 (55) 56666-333
Middle East, Asia and North Africa +41 52 675 3777
The Netherlands 090 02 021797
Norway 800 16098
People’s Republic of China 86 (10) 6235 1230
Poland +41 52 675 3777
Portugal 80 08 12370
Republic of Korea 82 (2) 528-5299
Russia & CIS 7 095 775 1064
South Africa +27 11 254 8360
Spain (+34) 901 988 054
Sweden 020 08 80371
Switzerland +41 52 675 3777
Taiwan 886 (2) 2722-9622
United Kingdom & Eire +44 (0) 1344 392400
USA 1 (800) 426-2200
For other areas contact Tektronix, Inc. at: 1 (503) 627-7111
Updated 15 June 2005
Our most up-to-date product information is available at:
www.tektronix.com
Product(s) not available in Europe. Product(s)
are manufactured in ISO registered facilities.
Copyright © 2005, Tektronix, Inc. All rights reserved. Tektronix products are
covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price
change privileges reserved. TEKTRONIX and TEK are registered trademarks of
Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies.
8/05
HB/WOW
51W-11195-2
Open as PDF
Similar pages