Motorola MBP11 babyphone

User’s Guide
MBP11
Baby Monitor
The features described in this user's
guide are subject to modifications
without prior notice.
Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the MBP11. Now you can hear your baby sleeping in the other room.
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you
will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for
warranty coverage.
For product-related questions, please call:
US and Canada
1-888-331-3383
On the Web: www.motorola.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you can use the baby monitor, we recommend you insert and fully
charge the battery in the parent unit, so that it continues to work if you
disconnect it from the power outlet to carry it to another location. Please read
the Safety Instructions on page 6 before you install the units.
Got everything?
•
•
•
•
•
1 x Parent unit (MBP11PU)
1 x Baby unit (MBP11BU)
1 x Rechargeable Ni-MH battery pack for the Parent unit
1 x Power adapter for the Parent unit
1 x Power adapter for the Baby unit
Overview of your Parent unit
1
Sound Level LED
3 GREEN and 2 RED LEDs turn on and off in real
time to indicate the noise level in baby's room.
When audio is being picked up by microphone of
baby unit, the LEDs light up to in indicate audio level
with reference to the sensitivity setting. The more
LEDs light up, the stronger the sound is.
If no LED lights up it means the sound level in baby's
room does not exceed the thresholds set through the
parent unit.
The LEDs are also used for indicating the speaker
volume setting on parent unit. The louder you set the
speaker volume, the more LEDs light up.
2
Link Indicator
On when the parent unit is powered on and linked to
the baby unit.
Flashes when the parent unit is out of range from
baby unit.
Off when the parent unit is powered off.
3
Power
Press and hold to power on/off the parent unit.
4
Volume +
Press to increase the speaker volume.
5
Volume Press to decrease the speaker volume.
6
Charging Indicator
On steadily when in charging mode.
Flashes when low battery is detected.
NOTE
Off even if connected with power adapter but without
battery pack installed.
1
6
2
3
5
4
Overview of your Baby unit
Important guidelines for installing our Baby
Monitor
1
2
1
2
Power Indicator
On when the baby unit is switched on.
Off when the baby unit is switched off.
Power
Press and hold to power on/off the baby unit.
•
To use your baby unit and parent unit together, you
must be able to establish a radio link between them,
and the range will be affected by environmental
conditions.
•
Any large metal object, like a refrigerator, a mirror, a
filing cabinet, a metallic doors or reinforced concrete,
between the baby and parent unit may block the radio
signal.
•
The signal strength may also be reduced by other solid
structures, like walls, or by radio or electrical
equipment, such as TV's, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
•
If the signal is poor, try moving the parent and/or the
baby unit to different positions in the rooms.
1. SAFETY INSTRUCTIONS ................................... 6
2. GETTING STARTED............................................ 7
2.1 Baby unit power supply.......................................7
2.2 Parent unit battery installation.............................7
2.3 Belt clip on parent unit and baby unit..................8
3. USING YOUR BABY MONITOR.......................... 9
3.1 Power on/off the parent unit................................9
3.2 Power on/off the baby unit ..................................9
3.3 Adjust speaker volume........................................9
4. DISPOSAL OF THE DEVICE
(ENVIRONMENT)............................................... 10
5. CLEANING......................................................... 10
6. TROUBLESHOOTING ....................................... 11
7. GENERAL INFORMATION................................ 12
8. TECHNICAL SPECIFICATIONS........................ 16
5
1. SAFETY INSTRUCTIONS
WARNING:
STRANGULATION HAZARD - Keep the adapter cord
out of baby's reach.
NEVER place the baby monitor or its cord within the crib.
Secure the cord some distance away from baby's reach.
Never use extension cords with AC Adapters. Only use
the AC Adapters provided.
This baby monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as
described in the User's Guide, safe to use. Therefore,
always read the instructions in this User's Guide carefully
before using the device.
• Determine a location for the baby monitor that will
provide the best audio reception of your baby in his crib.
• Place the baby monitor on a flat surface, such as a
dresser, bureau, or shelf.
• NEVER place the baby monitor or its cord within the
crib.
• Secure the cord to the wall to keep cord away from the
baby's reach.
• Adult assembly is required. Keep small parts away from
children when assembling.
6
• This product is not a toy. Don't allow children to play
with it.
• This baby monitor is not a substitute for responsible
adult supervision.
• Keep this User's Guide for future reference.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with power adapters. Only
use the power adapters provided.
• Test this monitor and all its functions so that you are
familiar with it prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided. Do
not use other chargers or power adapters as this may
damage the device and battery pack.
• Only insert battery pack of the same type.
• Do not touch the plug contacts with sharp or metal
objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Use only battery pack with rating: 2.4V 400mAh.
SAFETY INSTRUCTIONS
2. GETTING STARTED
2.1
Baby unit power supply
2.2
Parent unit battery installation
The parent unit comes with a battery pack. Charge the
parent unit before you use it for the first time or when the
parent unit indicates that the battery is low.
Battery JACK
DC JACK
Battery PLUG
DC PLUG
1. Insert the small plug of the power adapter into the side
of the baby unit.
2. Connect the other end of the power adapter to the
power outlet.
NOTE
Only use the provided power adapter.
GETTING STARTED
1. Turn the belt clip so that it is in the hanging position.
2. Slide off the battery compartment cover.
3. Insert the battery plug of the supplied battery pack into
the battery jack inside the compartment.
4. Reattach the battery compartment cover.
7
5. Insert the small plug of the power adapter into the side
of the parent unit.
2.3
Belt clip on parent unit and baby unit
6. Connect the other end of the power adapter to the
power outlet.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter.
1. Belt clip mode: applicable for parent unit only.
2. Support stand mode: lift up and turn the belt clip
by half turn to convert into support stand mode.
8
GETTING STARTED
3. USING YOUR BABY MONITOR
Please read these instructions carefully, and be reminded
that this baby monitor is just intended as an aid. It is not a
substitute for responsible, correct parental supervision.
3.1
Power on/off the parent unit
1. Provided the parent unit is off, press and hold 0 until
the Link Indicator is on. The parent unit is now
powered on and the parent unit will search for and link
itself to the baby unit.
3.3
Adjust speaker volume
There are 6 volume levels on the parent unit, including
VOLUME OFF.
1. Press
or
on the parent unit to access the
current volume level.
2. Press
to increase or
to decrease the volume
of the parent unit respectively.
2. Provided the parent unit is on, press and hold 0 until
the Link Indicator is off. The parent unit is now
powered off.
3.2
Power on/off the baby unit
Provided the baby unit is off, press and hold 0 until the
Power Indicator is on. The baby unit is now powered on.
Provided the baby unit is on, press and hold 0 until the
Power Indicator is off. The baby unit is now powered off.
NOTE
If you place the parent and baby units too close together,
you will hear a high pitched noise, this is normal. The units
are designed to be located at a distance from one another,
e.g. in separate rooms.
USING YOUR BABY MONITOR
9
4. DISPOSAL OF THE DEVICE
(ENVIRONMENT)
At the end of the product lifecycle, you should
not dispose of this product with normal
household waste. Take this product to a
collection point for the recycling of electrical
and electronic equipment. The symbol on the
product, user's guide and/or box indicates this.
Some of the product materials can be re-used if you take
them to a recycling point. By reusing some parts or raw
materials from used products you make an important
contribution to the protection of the environment.
Please contact your local authorities in case you need
more information on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly
manner according to your local regulations.
10
5. CLEANING
Clean MBP11 with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive
solvents.
Cleaning and care
• Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not covered
by the warranty.
• Keep your MBP11 away from hot, humid areas or strong
sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards of
reliability for your MBP11. However, if something does
go wrong, please do not try to repair it yourself - contact
Customer Service for assistance.
DISPOSAL OF THE DEVICE (ENVIRONMENT)
6. TROUBLESHOOTING
Link light on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly
installed and that it is not drained.
• Recharge the parent unit by connecting it to the power
supply.
Link light on the parent unit flashes
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.
Low battery light on the parent unit flashes
• Battery pack in the parent unit is running low. Connect
the parent unit to the power outlet with the supplied
power adapter for recharging.
The parent unit beeps
• Lost connection with the baby unit. Reduce the distance
between the parent unit and the baby unit, but not
closer than 5 feet.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.
TROUBLESHOOTING
• Battery pack in parent unit is running low. Connect the
parent unit to the power outlet with the supplied power
adapter for recharging.
Cannot hear sound or baby cry from the parent
unit
• The volume level in the parent unit may be set too low,
increase the volume level of the parent unit. Refer to
section 3.3 for volume level settings.
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
The baby monitor system produces a high-pitched
noise
• The parent unit and the baby unit are too close to each
other. Make sure the parent unit and baby unit are at
least 5 feet away from each other.
• The speaker volume of the parent unit may be set too
high. Decrease the volume of the parent unit.
Battery pack in the parent unit is running low
quickly
• The volume level of the parent unit may be set too high
which consumes power. Decrease the volume level of the
parent unit. Refer to section 3.3 for volume level settings.
11
7. GENERAL INFORMATION
If your product is not working properly...
1. Read this User's Guide.
2. Visit our website: www.motorola.com
3. Contact Customer Service in the US and Canada at
1-888-331-3383.
To order a replacement battery pack for parent unit,
contact customer service.
Consumer Products and Accessories
Limited Warranty ("Warranty")
Thank you for purchasing this Motorola branded product
manufactured under license by Binatone Electronics
International LTD ("BINATONE")
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE
warrants that this Motorola branded product ("Product") or
certified accessory ("Accessory") sold for use with this
product that it manufactured to be free from defects in
materials and workmanship under normal consumer usage
for the period outlined below. This Warranty is your
exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer
purchaser, and is not transferable.
12
What will BINATONE do?
BINATONE or its authorized distributor at its option and
within a commercially reasonable time, will at no charge
repair or replace any Products or Accessories that does not
conform to this Warranty. We may use functionally
equivalent reconditioned/ refurbished/ pre-owned or new
Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR
OR REPLACEMENT PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO
EVENT SHALL MOTOROLA OR BINATONE BE LIABLE,
WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT OR ACCESSORY,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS
OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS
OF INFORMATION OR OTHER FINANCIAL LOSS
GENERAL INFORMATION
ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR
ACCESSORIES TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Exclusions
Some jurisdictions do not allow the limitation or exclusion
of incidental or consequential damages, or limitation on the
length of an implied warranty, so the above limitations or
exclusions may not apply to you. This Warranty gives you
specific legal rights, and you may also have other rights
that vary from one jurisdiction to another.
Batteries. Only batteries whose fully charged capacity falls
below 80% of their rated capacity and batteries that leak
are covered by this Warranty.
Products Covered
Length of Coverage
Consumer Products
One (1) year from the date of the
products original purchase by the
first consumer purchaser of the
product.
Consumer
Accessories
Ninety (90) days from the date of
the accessories original purchase
by the first consumer purchaser
of the product.
Consumer Products
and Accessories that
are Repaired or
Replaced
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is longer.
GENERAL INFORMATION
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are
excluded from coverage.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.)
to the surface of the product resulting from misuse; (b)
contact with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food; (c)
use of the Products or Accessories for commercial
purposes or subjecting the Product or Accessory to
abnormal usage or conditions; or (d) other acts which are
not the fault of MOTOROLA or BINATONE, are excluded
from coverage.
Use of Non-Motorola branded Products and
Accessories. Defects or damage that result from the use
of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded
from coverage.
13
Unauthorized Service or Modification. Defects or
damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in any
way by someone other than MOTOROLA, BINATONE or
its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or
parts, are excluded from coverage.
Communication Services. Defects, damages, or the
failure of Products or Accessories due to any
communication service or signal you may subscribe to or
use with the Products or Accessories is excluded from
coverage.
How to Obtain Warranty Service or Other
Information?
To obtain service or information, please call:
US and Canada
1-888-331-3383
You will receive instructions on how to ship the Products or
Accessories at your expense and risk, to a BINATONE
Authorized Repair Center. To obtain service, you must
include: (a) the Product or Accessory; (b) the original proof
14
of purchase (receipt) which includes the date, place and
seller of the Product; (c) if a warranty card was included in
your box, a completed warranty card showing the serial
number of the Product; (d) a written description of the
problem; and, most importantly; (e) your address and
telephone number.
These terms and conditions constitute the complete
warranty agreement between you and BINATONE
regarding the Products or Accessories purchased by you,
and supersede any prior agreement or representations,
including representations made in any literature
publications or promotional materials issued by
BINATONE or representations made by any agent
employee or staff of BINATONE, that may have been made
in connection with the said purchase.
FCC, ACTA and Industry Canada (IC)
Regulations
Warning: Changes or modifications to this equipment not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
GENERAL INFORMATION
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
This Class B digital apparatus complies with Canadian
ICES-003
Caution: To maintain the compliance with the FCC's RF
exposure guideline, place the baby unit at least 20 cm from
nearby persons.
For body worn operation, the parent unit has been tested
and meets the FCC RF exposure guidelines when used
with the belt clip supplied or designated for this product.
Use of other accessories may not ensure compliance with
FCC RF exposure guidelines.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
GENERAL INFORMATION
15
8. TECHNICAL SPECIFICATIONS
RF frequency band
1921.536 MHz - 1928.448 MHz
Channels
5
Operating
temperature
5ºC to 45ºC
Baby unit voltage
(AC voltage, 60Hz)
100 - 120 V
Baby unit voltage
(Adapter output)
6V DC, 450mA
Parent unit voltage
2.4V 400mAh Ni-MH battery pack
Parent unit voltage
(AC voltage, 60Hz)
100 - 120 V
Parent unit voltage
(Adapter output)
6V DC, 450mA
16
TECHNICAL SPECIFICATIONS
Manufactured, distributed or sold by Binatone
Electronics International LTD., official licensee
for this product. MOTOROLA and the Stylized
M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other
trademarks are the property of their respective
owners.
© 2011 Motorola Mobility, Inc. All rights
reserved.
Version 5.0
Printed in China