PT-D5700U
PT-D5700UL
The 6,000-lm projector that's easy to see
even in brightly lit rooms
6,000lm
XGA
Further expanding reliability
and picture quality
Panasonic's DLP® system projectors have taken another step
forward. Now they produce even better images while
maintaining all of their highly reliable functions.
Their 6,000-lm brightness delivers crisp,
easy-to-see images even in brightly lit
classrooms and meeting rooms, to make
presentations easier to understand.
High power brightness
6,000 lm
DLP ® Projector
PT-D5700U
PT-D5700UL*
*Without lens model
High brightness and high picture quality
High-power 6,000-lm
brightness
The PT-D5700U/D5700UL offer full 6,000 lumens of
brightness, thanks to the newly developed AC lamp,
more efficient reflectors and a synthetic mirror. This
enables crisp, sharp images even when projecting in
a classroom, meeting room, or other location with
ordinary daytime lighting.
1
System daylight view
NEW
The system daylight view function uses an image processing circuit to
compensate for the loss of color saturation that occurs when light reflects
onto the screen from bright surroundings. It is especially effective for
producing crisp, sharp images in dark portions containing gradation. The
function can be adjusted in three steps.
Off
On
Projection of bright, high-quality
images in large spaces such as halls,
conference rooms, classrooms,
control rooms, and churches.
Vivid color
control
A unique control technology is used
to maximize the color segment
areas of the color wheel. Compared
to conventional projectors, the
brightness of each color is
increased by an average of about
15%. This results in sharper,
clearer color reproduction.
Full 10-bit
picture
processing
Conference rooms
NEW
Classrooms
New IP
conversion
circuit
Control rooms
NEW
The use of a full 10-bit image
processing system provides
smooth tonal expression. For
example, skin tones appear natural
and true to life.
The PT-D5700U/D5700UL features
a new IP conversion circuit that
produces more detailed images
than our previous models.
Progressive cinema
scan (3/2 Pulldown)
3D color
management system
Dynamic
sharpness control
This interlace/progressive
conversion technology
automatically detects when the
input signal is derived from filmed
material and selects the optimum
progressive processing method to
assure faithful reproduction of the
original image.
Compensation provides optimal
levels of color saturation, hue, and
brightness that were not possible
with conventional projectors.
Colors approach those of the
original image, even on largescreen displays.
The dynamic sharpness control
circuit adjusts the video signal
waveforms based on the difference
in brightness of adjacent pixels for
a sharp, clear picture that is
relatively unaffected by signal
noise.
Churches
More effective
noise reduction
NEW
Images are noticeably clearer,
thanks to higher-performance
frame noise reduction, which
lowers image graininess, and
improved MPEG noise reduction,
which suppresses the block noise
and mosquito noise that are
common in fast-action scenes.
2
Excellent reliability
Dual lamp system
The use of two lamp system increases brightness
and eliminates the need to interrupt a
presentation if a lamp burns out (in dual lamp
operation mode).
Flexible system installation
Built-in multi-screen
support system
Color matching
NEW
Edge blending
Horizontal/Vertical lens shift
A wide adjustment range of the horizontal/
vertical lens shift assures distortion free
images and adds convenience and versatility.
(Horizontal : manual, Vertical : powered)
+10%
H
0
Screen center
-10%
0
Projector
With edge blending
Without edge blending
V
50%
Screen center
Web browser control/
monitoring and
e-mail message alert
Anybody can operate the PT-D5700U/D5700UL
by remote control or
monitor its status over a
LAN network, because it is
all done using the
computer’s familiar Web
browser. Furthermore, the
PT-D5700U/D5700UL sends
an E-mail message to notify
the operator when an error
has occurred, or a lamp
needs to be replaced.
Remote control
PT-D5700U
Overlapping image edges
•Edge blending function
This function controls luminance at the edges
where screens overlap. By eliminating unnatural
screen joints, it produces uniformly attractive
multi-screen displays.
•Color matching function
The Color Matching function corrects the subtle
variations in color reproduction between projectors.
Originally developed ''adjustment assist'' software
quickly and precisely optimizes images, so the
colors on each screen are uniformly reproduced.
•Digital image enlarging
Images are enlarged up to 10 times (horizontally and
vertically) without having to use any additional devices.
Optional lenses for
various venues
Five optional lenses with different throw
distances are available in addition to the
supplied lens. These powered zoom/focus
lenses enable the projectors to perform
superbly in an array of projection
environments.
LAN
PC
e-mail
PC
Internet
PC
LAN
PC
e-mail
PC
Multiple terminals
The PT-D5700U/D5700UL has an array of terminals-two RGB inputs including a 5-BNC connector,
serial in/out, one S-video inputs, two remote in, one remote out, DVI-D and control capability-to
support a broad range of projection needs HDCP. (High-Bandwidth Digital Content Protection)
compliant. Using the serial terminal(RS232C), it is also possible to connect and operate AMX and
Crestron control systems with ease.
Lens-centered design
A lens-centered, symmetrical design provides
flexible system layout, eliminating the need for
any special considerations when planning the
installation site.
3
AC lamp
Liquid-cooling system
Micro cut filter
Newly developed AC lamps with full 275
watts of power offer excellent brightness and
greater reliability than other types. A new lamp
drive system also lowers the stress on the lamp
electrodes while the lamps are lit. The new
lamps have a lifetime of approximately 3,000
hours*, which is reassuring for applications
where the projector is frequently used. The AC
lamps also minimize color irregularities.
Panasonic's original liquid-cooling system
directly cools the DLP® chip, which extends
PT-D5700U/D5700UL performance and attains a
high level of reliability. It also enables operation
in temperatures up to 113˚F/45˚C for use in a
wider variety of environments, and maintains a
more stable performance even in harsh
conditions while keeping the operating sound
down to a quiet 29 dB*.
A filter in the air intake section traps dust
particles that are 10 microns* or larger. By
capturing approximately 7 times as much dust
as conventional filters, it guards against optical
blocks and reduces the penetration of dust into
the interior to provide
stable operation by, for
example, preventing
drops in brightness.
* The indicated figure is the maximum value when two
lamps are used in Lamp Low mode, with operating cycles of
3.5 hours ON and 0.5 hour
OFF. If the frequency of
operation increases, the
lamp replacement cycle
will become shorter.
[It is recommended that
the mechanical shutter be
used to turn images off for
a short period.]
*with lamp mode: low
*10-micron dust = lint,
pollen, etc.
NEW
Micro cut filter
Cooling directly
Dust-resistant optical block
DLP® chip
Radiator
The dust-resistant design of the optical block
helps ensure that projectors with DLP®
technology will continue to deliver crisp, sharp,
high resolution images over an extended
service life.
Reserver tank
PJLink™ compatibility
Other valuable features
The LAN terminals support PJLink™ class 1
connection. Control with the same specifications
is also possible when used in a multi-projector
system with projectors of
another brand.
Mechanical lens shutter
Multi projector
monitoring &
control software
Direct power off
NEW
Panasonic's original ''Multi Projector Monitoring
& Control Software''* freeware allows the user
to control and monitor multiple projectors via
LAN. When a problem occurs, an alarm
message is sent
to the controlling/
monitoring PC.
* Available in June 2008.
Please consult a sales
representative if necessary.
Easy lens replacement
The PT-D5700U/D5700UL
uses the bayonet system,
so lenses attach and detach
with one-touch ease.
Control panel and
wireless remote
control
A mechanical lens shutter minimizes annoying
light leakage when the PT-D5700U/D5700UL is
on standby or temporarily not in use, such as
during a meeting.
Built-in capacitor provides power to cool the
internal parts. This means that you can switch
off the room's main power as soon as the
presentation ends. PT-D5700U/D5700UL
doesn't make you wait around and helps
minimize lamp damage.
Flexible angle setting
The PT-D5700U/
D5700UL can be rotated
vertically. This means you
can install it at any upand-downangle you wish
to accommodate different
installation conditions.
360˚
Easy replacement of
dust filter and lamp
Dust filter is replaced from the side and lamps
are replaced from the back panel.
Both of them are replaced very easily even
when PT-D5700U/D5700UL is installed.
Others
•ID assignment for up to 65 units
•Coordinated group control for up to
26 groups (A-Z)
•Digital vertical keystone correction
•Built-in test pattern
•Selectable 9-language on-screen menu
(English, German, French, Spanish, Italian,
Russian, Japanese, Chinese, Korean)
•Anti-theft features with chain opening
The PT-D5700UL delivers the same performance as the PT-D5700U, but comes without lens.
Combine it with an optional lens to get the exact performance you need according to usage
and operating conditions.
NEW
The rear control panel allows for easy
operation when the PT-D5700U/
D5700UL is set on a desk or floor. New
wireless remote control with longer
transmission capacity of 98 feet (30 m).
Ecology-conscious design
Panasonic works from every angle to minimize environmental impact in the product design,
production and delivery processes, and in the performance of the product during its life
cycle. The PT-D5700U/D5700UL reflects the following ecological considerations.
• No halogenated flame retardants are used in the cabinet.
• Lamp power switching further reduces power consumption.
• Auto Power Save activates standby mode when no signal is input.
4
Specifications
Dimensions
unit: inch [mm]
®
&
#!$(+ !"
!"
With supplied lens*
1.8-2.4:1
min.
max.
With ET-DLE200
2.4-4.0:1
max.
min.
With ET-DLE310
3.4-4.4:1
max.
min.
With ET-DLE410
4.5-8.4:1
min.
max.
#$
!"
(!)*
!"
+
Replacement Lamp Unit
ET-LAD57
ET-LAD57W (twin pack)
$#!-$ !"
*)"
Ceiling Mount Bracket
for high ceiling
ET-PKD56H
Zoom Lens (1.3-1.8:1)
ET-DLE100
Zoom Lens (2.4-4.0:1)
ET-DLE200
Zoom Lens (3.4-4.4:1)
ET-DLE310
Zoom Lens (4.5-8.4:1)
ET-DLE410
Fixed Focus Lens (0.8:1)
ET-DLE050
Ceiling Mount Bracket
for low ceiling
ET-PKD55S
NOTES ON USE
With ET-DLE050
0.8:1
L
50"
1,335mm
4.3'
1,812mm 1,785mm 2,376mm 2,454mm 4,044mm 3,379mm
13.2'
5.9'
5.8'
7.7'
8.0'
10.2'
4,444mm 4,493mm
14.4'
14.4'
80"
2,163mm
7.0'
2,928mm 2,895mm 3,840mm 3,966mm 6,516mm 5,470mm
21.3'
9.6'
9.5'
12.6'
13.0'
17.7'
7,174mm 7,271mm 13,705mm
23.2'
23.6'
44.9'
1,292mm
4.2'
100"
2,715mm
8.9'
3,672mm 3,635mm 4,816mm 4,974mm 8,164mm 6,864mm
22.3'
26.7'
12.0'
11.9'
15.8'
16.3'
8,994mm 9,123mm 17,165mm
29.1'
29.8'
56.1'
1,624mm
5.3'
150"
4,095mm
13.4'
5,532mm 5,485mm 7,256mm 7,494mm 12,284mm 10,349mm 13,544mm 13,753mm 25,815mm
33.7'
40.2'
44.2'
18.1'
44.9'
17.9'
84.6'
23.8'
24.5'
2,454mm
8.0'
200"
5,475mm
17.9'
7,392mm 7,335mm 9,696mm 10,014mm 16,404mm 13,834mm 18,094mm 18,383mm 34,465mm
45.2'
53.8'
59.3'
24.2'
60.3'
24.0'
112.8'
31.8'
32.8'
3,283mm
10.7'
300"
8,235mm 11,112mm 11,035mm 14,576mm 15,054mm 24,644mm 20,804mm 27,194mm 27,643mm 51,765mm
68.2'
27.0'
80.8'
88.9'
36.4'
90.5'
36.1'
169.6'
47.8'
49.3'
—
—
400"
10,995mm 14,832mm 14,735mm 19,456mm 20,094mm 32,884mm 27,774mm 36,294mm 36,903mm 69,065mm
90.8'
36.0'
107.8'
118.7'
48.6'
121.0'
48.3'
226.3'
63.8'
65.9'
—
—
500"
13,755mm 18,552mm 18,435mm 24,336mm 25,134mm 41,124mm 34,744mm 45,394mm 46,163mm 86,365mm
113.8'
45.1'
134.8'
148.6'
,60.8'
151.2'
60.4'
283.1'
79.8'
82.4'
—
—
600"
16,515mm 22,272mm 22,135mm 29,216mm 30,174mm 49,364mm 41,714mm 54,494mm 55,423mm 103,665mm
339.8'
136.8'
54.1'
161.9'
178.4'
73.0'
181.7'
72.6'
95.8'
98.9'
—
—
8,515mm
27.8'
%"&'$
Optional accessories
With ET-DLE100
1.3-1.8:1
min.
max.
&
, !"
(+ (
20 7/8 (530)
Projection distance
&%
+
*1: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 Average value. May differ depending on models.
Diagonal
image
size
-#!$(+ !"
(+ ( ,
6 9/16 (167)
16 7/8 (429)
System
DLP Projection system
Device
0.7" (diagonal) DLP® chip 4:3
786,432 (1,024 x 768) x 1 total of 786,432 pixels
Pixels
275 W UHM lamp x 2 (Dual Lamp System)
Lamp
Brightness (normal lamp)*1 6,000 lumens (dual lamp, high power mode)
1
Contrast ratio*
2,000:1 (full on/full off, contrast mode: high)
Resolution
1,024 x 768 pixels
Lens
PT-D5700U
Powered zoom/focus lens,
Supplied lens: (1.8-2.4:1)
F = 1.7-2.0, f = 25.6-33.8 mm
PT-D5700UL
Optional powered zoom/focus lenses
Screen size
50 - 600 inches
Lens shift
Vertical: ±50% (powered), Horizontal: ±10% (manual)
RGB input scanning
frequency
fH 15-91 kHz, fV 50-85 Hz
Dot clock 150 MHz or lower
480i, 480p, 576i, 576p, 720/60p, 720/50p, 1080/60i,
Component signal
1080/60p 1080/50i, 1080/50p
NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
Video signal
Terminals
BNC
VIDEO IN
Mini DIN 4-pin
S-VIDEO IN
BNC x 5
RGB1/YPBPR IN
RGB2 IN
D-sub HD 15-pin
DVI-D IN
24pin DVI 1.0 compliant, HDCP compatible, for single link
RS-232C IN
D-sub 9-pin female
RS-232C OUT
D-sub 9-pin male
REMOTE 1 IN
M3 jack
REMOTE 1 OUT
M3 jack
REMOTE 2 IN
D-sub 9-pin female (parallel)
LAN
RJ-45x1, compliant with PJLink™ (class 1), 10Base-T/100Base-TX
Keystone correction range ±30˚ (with standard lens)
Installation
Front/rear, ceiling/floor
Power cord length
9.9' (3.0m)
Power supply
120 V AC, 60 Hz
Power consumption
770 W (770 VA) (10 W during standby mode with fan stopped)
Dimensions (W x H x D)
20-7/8' x 6-9/16' x 16-7/8' (530 x 167 x 429 mm) (without lens)
2
Weight*
PT-D5700U
Approx. 30.6 lbs (13.9 kg) with supplied lens
PT-D5700UL
Approx. 28.9 lbs (13.1 kg) without lens
Operating temperature
32 -113 ˚F (0 -45 ˚C)
Operating humidity
20-80% (no condensation)
Supplied accessories
Power cord, Wireless/wired remote control unit,
AA Batteries (x 2) for remote control, Wire rope
794mm
2.6'
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke.
Doing so may result in fire, malfunction, or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break,
emitting a large sound, or fail to illuminate, due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm or more around the projector's exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked)
projection. When stacking projector units, be sure to provide the amount of space indicated between
them. These space requirements also apply to installation where only one projector unit is operating at
one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be
between 0 ˚C and 35 ˚C. Also make sure the projector's intake and exhaust openings are not blocked.
Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake
openings.
* Even when the ambient temperature near the intake opening is 40 ˚C/104 ˚F or lower, an accumulation of hot air
inside the cabinet may cause the protective circuit to activate and shut down the projector. Please give ample
consideration to the design with regard to ambient temperature conditions.
4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's
alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24
hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per day if the
using the dual-lamp mode.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on
individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
6. Please clean the filter regularly. As for details, please refer to the operation manual.
* The supplied lens is used only for PT-D5700U.
.
Panasonic Projector Systems Company,
Unit of Panasonic Corporation of North America
www.panasonic.com/projectors
Headquarters
3 Panasonic Way, 4B-9
Secaucus, NJ 07094
888-411-1996
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
Canada L4W 2T3
905 624 5010
!"#$%$&
(C> @,@
/0
1 2231
4 25
678
0 6
4
26
19 7 678
32
06:
4
) 22:
7 5: 5 1; 0
< 1; 0
= 7 0
<
5 >*; >2< 5 )1 6
4
#) ?) 1; 5 !
: 6 2
4
):: 1; 22
9 5 2
= 1; 4 8
!10 16:
4
$*< $* :0 $* :: :0 1; 0
1; 5 3 !
61
4
@@ 8
9
1 129 5 2
5 "
)14 ):: 0
=4
@@ 2
):: 0
=4
-$AB@@-@+
7 @; >24
Open as PDF
Similar pages