CPM/Delta Sink Accessories/Water Filters

E-30
CPM/Delta Sink Accessories/Water Filters
Water Filter I - Cold
ABS Drain Set I
4 piece set is designed for use in
photographic sinks. 3" body to 1½" male
thread. Includes 3" plug. Recommended over
stainless steel for sealing ability and corrosion
resistance.
ECP403D
ABS Drain Set I
70415
Circulates clean water by means of a ported
dome which cannot be clogged by prints or film.
ABS Drain Set I required.
ECP426D
ECP427D
Sink Accessories
Water Filters
E
Water Filter I- cold
Water Filter II- hot
ECP081320
ECP428
ECP429
ECP424D
ECP75451
box/30, 20 micron
pk/2, 20 micron
pk/2, 5 micron
box/30, 5 micron
box/20, 5 micron
75411
72200
72250
75441
75451
Contains: One each hot & cold water filter housings, 2- 20 micron
sediment cartridges, 2 shut-off valves & fittings for ¾" pipe, ½" pipe
reducers & teflon tape, 2 stainless steel wall brackets, 4ft. of 5/8" clear
flexible hose.
ECP080361
Designed for cleaning and washing. Spray held,
4 foot hose and faucet attachments.
Water Filter Package
75550
O-Ring Replacements for Water Filters I & II
ECP080327
Spray Set I
75310
75320
Water Filter Package
70810
Spray Set I
ECP410D
ECP427D
3/4" standard spun poly cartridge fits 99% of all units.
Polypropylene spun (string wound) cartridges.
Recommended for photo processing. They have high
wet strength and holding capacity. Glued cellulose (paper)
cartridges are not recommended for photo applications.
Charcoal carbon filters are recommended for color chemistry
and drinking water.
Chrome plated brass,
10" spout, hose fitting,
non-corrosive, easy to install.
Complete directions included.
5 year limited warranty.
Faucet Set I
ECP426D
Water Filter Elements
70420
Faucet Set I
ECP409D
Water Filter II - Hot
Glass reinforced nylon. Rated 200°F/200
P.S.I. rated. Red body, 3/4" NPT inlet and
outlet. One 20 micron sediment cartridge
included. Five year limited warranty.
Washer I
Washing Well Attachment
ECP405D Washer I
Easy to install, cleans water.
Reinforced Polypropylene,
clear transparent body.
3/4" FPT 125°F/125 PSI rated.
One 20 micron sediment cartridge
included. Five year limited warranty.
4 Buna N rubber O-rings
75530
Water Filter Spanner Wrench- Nylon
70510
ABS Sink Plumbing Installation Pacs
Installation Pac I (Single Drain Sink Set)
ECP430D
Faucet (4" center, 8" gooseneck), Drain Waste Set, Connectors,
Spray Set I, ABS Drain Set I, 6 ft. ABS Tubing
Installation Pac II (Dual Drain Sink Set)
Faucet (4" center, 8" gooseneck), Dual Drain Waste Set, Connectors,
Spray Set I, (2) ABS Drain Set I, 6 ft. ABS Tubing
ECP452D
ECP453D
Single Sink Drain Set
Dual Drain Sink Set
70210
70220
Stainless Sink Installation Pac
S/S 5" drain standpipe, (2) four foot ½" S/S FIP supply flex-hoses,
(4) chrome nipples, (2) chrome shutoff ball valves, black ABS drain
waste tail piece, P-Trap, 90O coupling elbow, six foot ABS 1½" tubing.
ECP454D
Stainless Sink Installation Pac
61320
Water Filter Wrench
Wall Mount Bracket
Stainless steel. Fits 99% of water filters with 3/8" - 3/4" pipe thread.
ECP431D
Wall Mount Bracket
EAST
12/2003
75520
Premier/Doran Filter Cartridge
A 20 micron accordion-fold paper filter. This type of
paper filter may be flushed with running water to
clean for reuse in an emergency. This cannot
be done with rapped or string type filters.
EAR309
Filter Cartridge
FOR FAST DELIVERY CALL TOLL FREE!
1-888-ARGRAPH
OR 1-800-526-6290
75510
WEST
1-888-WESTARG
OR 1-800-323-9069
Not responsible for typographical errors. Specifications subject to change without notice.
DFC-20
CPM/Delta Water Control Accessories
Water Temp II
Water Temperature Control Panels
Gives constant temperature readings while water
flows. Has on/off control of hot/cold water supply.
Fits 99% of faucets, swivels 360O degrees. Has water
strainer in fitting. Large 3" dual scale thermometer,
adjustable needle, probe contact of thermometer
built-in. Ready to be inserted into plumbing.
5 year warranty.
ECP445
Delta Water Temp II
All models are fully assembled, plumbed, and lab tested. Controls are
½"FPT. 3" dial thermometer with calibration screw. Some units include a
vacuum breaker which prevents backflow and stop check valves which
provide one-way flow of water. Models 15 and 25 have ¾" GHT for water
outlets. Models 800 and 1000 have ½" FPT for water outlets.
Model 15: Manual Water Panel
65010
Flo-Temp Thermometer Well
Attaches to faucet (or with adapter). Built-in filter.
Holds Premier/Samigon/Weston
type dial thermometers. Guarantees
temperature control at the faucet.
Operator adjusts temperature at water source.
Angled for easy reading. Nylon with brass fittings.
EPF901
Thermometer Well, Black
FLB
Aqualizer
Magnetic water conditioner & lime fighter. In line for 70% more strength.
Two in-Line Force Fields. Stops algae. No maintenance. As cold water
passes through the intense
magnetic field created by the
Aqualizer the characteristics
of the water are changed so
that the algae and lime will no longer be a problem. 3/4" MPT.
Water Conditioner/Lime Fighter
• Economical temperature
control
• Hot & cold water ball valves
• Flow control ball valve
• ½" NPT inlet connections,
¾" GHT outlet
• 20 micron water filter cartridge
ECP468D
Manual, model 15
65115
Model 25
• Thermostatic mixing valve for
accurate temperature control
• Flow control ball valve
• ½" NPT inlet connections,
¾" GHT outlet
• Adjustable spring check valves
• 20 micron water filter cartridge
79010
E
Water Control
Accessories
ECP656D
E-31
Flowmeter I
ECP470D
Conserves water. Rated 150 PSI. Stainless steel float and
guide rod. Extremely accurate ± 2%. Extra high pressure,
space age flowmeter with Buna N, O Rings.
Accurately measures .5 to 5 GPM of water.
Saves water, pays for itself. 1/2" MPT.
ECP437D
Flowmeter I
Model 25
65125
Model 800
• Hot & cold water filtration
• Vacuum breaker
• .5 - 5 GPM flowmeter
• Adjustable spring
check valves
• Two- 20 micron
water filter cartridges
78110
Vacuum Breaker I
Meets plumbing codes and EPA compliance regs.
Prevents backflow. Anti-siphon 1/2" IPC. Chrome.
ECP434D
Vacuum Breaker I
78210
Hose Bibb Vacuum Breaker II
Screw on spout. Anti-siphon prevents reverse flow of
contaminated water back to portable water supply. Required
by most U.S. City plumbing Codes and EPA Compliance
Regs. Fire, freezing, natural disasters, accidents, and broken
or cracked pipes below level of vacuum breaker can siphon
chemicals, solvents, etc. into water system. GHT fittings on both ends.
ECP435D
Hose Bibb Vacuum Breaker II
ECP466D
ECP472D
Model 800 water control, Regular Flow
Model 800 water control, Low Flow
66800
65150
78230
PERSONAL SERVICE IS OUR #1 PRIORITY
East: 111 Asia Place, Carlstadt, NJ 07072
(201) 939-7722
West: 2710 McCone Ave., Hayward, CA 94545 (510) 293-0575
FAX: (201) 939-7782
FAX: (510) 293-0565
12/2003
Water Control Accessories /Processors
CPM/Delta ECO 1TM Basic Unit
Thermostatic Water Control
Premier
Protects the environment with one way valves,
conserves water with low flow mixers, and uses
non-chromium and non-toxic UL sealers.
Dev-Tec
Color Print Processor,
Model 100B
• Two adjustable spring
checkstops for one way
water flow
• 3" dial thermometer rated
30OF to 130OF with recalibration
screw
• One volume control ball valve
• High impact ABS plastic housing
ECP095000
ECP65160
ECO 1 Basic Unit, Regular Flow, 1-7 GPM
ECO 1 Basic Unit, Low Flow, 5-1.5 GPM
65155
65160
ECO Vacuum Breaker with Fittings
Prevents backflow of water or chemistry into potable water supply.
Meets all U.S. and Canadian plumbing codes.
ECP095100
ECO Vacuum Breaker
65165.
Premier Chem-Trol Temperature Control
Controls color chemistry for use with drums or trays. Universal water hose
connects to household water faucets for temperature control of water
jacket that holds (4) pint size graduates (not included) and (3) 4 oz. size
graduates (included).
E
Thermometer included to control temperature with hot and cold water
mix. High impact plastic is insulated to hold temperatures.
• Makes one 8 x 10, two 8 x 10,
or one 11 x 14, as well as
smaller prints in color or
B&W.
• Daylight operation.
• 6 oz. flip top chemical containers marked in 2 oz. increments.
• For use with one shot or retrieval processing systems.
• Water bath tray included for precise temperature control.
• Simultaneous pour-in and empty.
• Economical, uses only 2 or 4 oz. of chemicals in most cases.
• Compatible with most color chemistry kits.
• Flexible twist lock end cap assembly for fast, easy cleaning.
• Optional motor drive Model MD-50 available.
• Optional temperature control Model TC-750 available.
• Complete with instructions.
EAR280
For 8 x 10 and 11 x 14 prints
Model 100-B
Dev-Tec Photo Processor
Temperature Control
• Compact, completely submersible unit for precise
temperature control of photo processor water bath.
• Creates a recirculating system for photo lab when
used with inexpensive submersible pump and
plastic container. Conserves water and energy.
• Fully adjustable for all common processing
temperatures up to 150O F.
• Automatic safety shut off when removed from water.
• All solid state electronic control cast in epoxy,
no thermostat or switch contacts to burn or
get wet.
• Light emitting diode (LED) indicator light
for easy adjustment.
• Provides complete error-free system for color print processing when
used with Dev Tec Processors and Motor Drives.
• 750 watts 120 VAC grounded outlet only.
EAR289
Temp Control for model 100B & 200A
TC-750
Dev-Tec Processing Drums
EAR251
Chem-Trol
WJ-4
For daylight processing of prints.
Designed for 8 x 10 prints,
but can be converted to 11 x 14
tube. May be hand agitated or
used with the Premier Drum
Agitator (Shown but not
included). Ends are removable
so it’s easy to clean.
EAR290
EAR291
8 x 10 Processing Drum w/end caps
11 x 14 Center Tube Extension Only
FOR FAST DELIVERY CALL TOLL FREE!
EAST
1-888-ARGRAPH
OR 1-800-526-6290
12/2003
WEST
1-888-WESTARG
OR 1-800-323-9069
Not responsible for typographical errors. Specifications subject to change without notice.
1310
1311
Water Control
Print Processors
E-32
Open as PDF
Similar pages