HP LaserJet Enterprise 600 M603n

LASERJET ENTERPRISE 600 M601, M602, AND
M603 SERIES PRINTER
Software Technical Reference
HP LaserJet Enterprise 600 M601,
M602, and M603 Series Printer
Software Technical Reference
Copyright and License
Trademark Credits
© 2011 Copyright Hewlett-Packard
Development Company, L.P.
Adobe®, Adobe Photoshop®, Arobat®, and
PostScript® are trademarks of Adobe
Systems Incorporated.
Reproduction, adaptation, or translation
without prior written permission is
prohibited, except as allowed under the
copyright laws.
Corel® is a trademark or registered
trademark of Corel Corporation or Corel
Corporation Limited.
The information contained herein is subject
to change without notice.
Intel® Core™ is a trademark of Intel
Corporation in the U.S. and other countries.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products and
services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for technical
or editorial errors or omissions contained
herein.
Java™ is a US trademark of Sun
Microsystems, Inc.
Edition 1, 9/2011
Microsoft®, Windows®, Windows® XP,
and Windows Vista® are U.S. registered
trademarks of Microsoft Corporation.
UNIX® is a registered trademark of The
Open Group.
ENERGY STAR® and the ENERGY STAR®
mark are registered U.S. marks.
Table of contents
1 Product basics and Windows software description ............................................................ 1
Purpose and scope ................................................................................................................... 2
Software availability and localization ......................................................................................... 2
Printing-system software on the Web ........................................................................... 2
In-box printing-system software CD ............................................................... 2
HP LaserJet software CD, Windows partition .................................. 3
CD versions and language support ................................................ 3
Windows printing-system software ........................................................................................... 10
Windows printing-system software ............................................................................ 10
HP LaserJet print drivers ........................................................................................... 10
HP PCL 6 Print Driver, PCL 6 Universal Print Driver, PCL 5 Universal Print
Driver, and PS Universal Print Driver ........................................................... 12
Printer-driver version numbers for Windows operating systems ....................... 12
Driver configuration for Windows ............................................................................................ 14
Driver autoconfiguration .......................................................................................... 14
Bidirectional communication ..................................................................................... 14
Enterprise AutoConfiguration .................................................................................... 14
Update Now .......................................................................................................... 15
HP Driver Configuration ........................................................................................... 16
Use the HP Embedded Web Server .......................................................................................... 18
Open the HP Embedded Web Server by using a network connection ............................ 18
Features ................................................................................................................. 19
Information tab ........................................................................................ 19
General tab ............................................................................................. 20
Print tab .................................................................................................. 21
Troubleshooting tab .................................................................................. 21
Security tab ............................................................................................. 21
HP Web Services ..................................................................................... 22
Networking tab ........................................................................................ 22
Other Links list ......................................................................................... 22
Use HP Web Jetadmin software ............................................................................................... 23
HP ePrint ............................................................................................................................... 23
ENWW
iii
HP Print View Software ........................................................................................................... 24
2 Install Windows software and utilities ............................................................................ 25
Introduction ........................................................................................................................... 25
Supported operating systems for Windows ................................................................................ 26
System requirements ................................................................................................ 26
Print driver and other software support links ............................................................... 27
Install overview ...................................................................................................................... 29
Software Installer system check ................................................................................. 29
Microsoft Windows Installer 3.1 ................................................................ 29
Software installation types for Windows .................................................................... 29
Installation options .................................................................................................. 30
Detailed Microsoft Windows installation instructions ................................................................... 31
Use the installation CD to install the product software .................................................. 31
Install optional software .......................................................................................................... 39
Uninstall software ................................................................................................................... 43
Use the HP Uninstall utility to remove the product software ........................................... 43
Use the software CD to remove the product software ................................................... 45
Remove the print driver by using the Windows Add or Remove Programs feature ............ 48
Uninstall the print driver by using the Server Properties feature ...................................... 50
3 HP PCL 6 print driver for Windows ................................................................................. 51
Introduction ........................................................................................................................... 51
Change the print driver settings for Windows ............................................................................ 52
Properties tab set .................................................................................................... 53
Printing preferences tab set ....................................................................................... 53
Document preview image .......................................................................... 53
Help system ........................................................................................................................... 54
HP Printer Help ....................................................................................................... 54
Incompatible Print Settings messages ......................................................................... 54
Advanced tab features ............................................................................................................ 55
Paper/Output ......................................................................................................... 55
Copy Count ............................................................................................. 56
Graphic ................................................................................................................. 56
True Type Font ......................................................................................... 56
Document Options .................................................................................................. 56
Advanced Printing Features ....................................................................... 57
Print Optimizations ................................................................................... 57
Printer Features ........................................................................................ 57
Layout Options ........................................................................................ 58
Printing Shortcuts tab features .................................................................................................. 59
iv
ENWW
Use defined printing shortcuts ................................................................................... 60
Create a custom printing shortcut .............................................................................. 60
Paper/Quality tab features ...................................................................................................... 61
Paper Options ........................................................................................................ 62
Paper sizes .............................................................................................. 62
Custom Paper Size ................................................................................... 63
Name ...................................................................................... 63
Paper size ................................................................................ 64
Supported paper sizes ............................................................... 64
Units ........................................................................................ 66
Custom width and height control limits ......................................... 66
Paper source ........................................................................................... 67
Paper type .............................................................................................. 67
Special pages .......................................................................................... 68
Covers ..................................................................................... 69
Special Pages dialog — Print pages on different paper .................. 69
Document preview image ......................................................................................... 70
Print Quality ........................................................................................................... 71
Print Quality drop-down menu ................................................................... 71
EconoMode check box ............................................................................. 71
Effects tab features ................................................................................................................. 72
Resizing Options ..................................................................................................... 73
Actual Size .............................................................................................. 73
Print Document On ................................................................................... 73
Scale to Fit .............................................................................................. 73
% of Actual Size ...................................................................................... 74
Document preview image ......................................................................................... 74
Watermarks ........................................................................................................... 75
Current watermarks .................................................................................. 76
Watermark Message ................................................................................ 77
Message Angle ........................................................................................ 77
Font Attributes .......................................................................................... 77
Default watermark settings ......................................................................... 78
Finishing tab features .............................................................................................................. 79
Document Options .................................................................................................. 79
Print on Both Sides ................................................................................... 80
Print on both sides automatically ................................................. 81
Print on both sides manually ....................................................... 81
Flip Pages Up .......................................................................................... 83
Booklet Layout ......................................................................................... 83
Book and Booklet Printing .......................................................... 83
ENWW
v
Pages per sheet ....................................................................................... 84
Print Page Borders .................................................................................... 84
Page Order ............................................................................................. 84
Document preview image ......................................................................................... 85
Orientation ............................................................................................................. 85
Job Storage tab features ......................................................................................................... 86
Status group box ..................................................................................................... 88
Job Storage Mode ................................................................................................... 88
Off ......................................................................................................... 88
Proof and Hold ........................................................................................ 88
Personal Job ............................................................................................ 89
Quick Copy ............................................................................................. 89
Stored Job ............................................................................................... 90
Make Job Private/Secure ......................................................................................... 90
PIN to print .............................................................................................. 91
Encrypt Job (with password) ...................................................................... 91
User Name ............................................................................................................ 91
Job Name .............................................................................................................. 92
Job Notification Options .......................................................................................... 92
Use job-storage features when printing ...................................................................... 93
Release a job-storage print job ................................................................... 93
Delete a job-storage print job .................................................................... 94
Services tab features ............................................................................................................... 95
Internet Services ...................................................................................................... 96
Device services ....................................................................................................... 96
Device Settings tab features ..................................................................................................... 97
Form to Tray Assignment .......................................................................................... 97
Font Substitution Table ............................................................................................. 98
External Fonts .......................................................................................... 99
Installing external fonts ............................................................... 99
Removing external fonts ........................................................... 100
Installable Options ................................................................................................ 100
Automatic Configuration ......................................................................... 101
Printer Status Notification ........................................................................ 101
Tray 3 ................................................................................................... 101
Tray 4 ................................................................................................... 101
Tray 5 ................................................................................................... 101
Tray 6 ................................................................................................... 101
Envelope feeder ..................................................................................... 102
Accessory output bin .............................................................................. 102
Duplex Unit (for 2-Sided Printing) ............................................................. 102
vi
ENWW
Allow Manual Duplexing ......................................................................... 102
Printer memory ....................................................................................... 102
Printer Hard Disk .................................................................................... 102
Job Storage ........................................................................................... 102
Secure Printing ....................................................................................... 102
Job Separator ........................................................................................ 103
Mopier Mode ........................................................................................ 103
Mopier mode and collation ...................................................... 103
About tab features ................................................................................................................ 105
4 Mac OSX software and utilities ..................................................................................... 107
Introduction ......................................................................................................................... 107
Determine the Mac driver version ........................................................................................... 108
Supported operating systems for Macintosh ............................................................................. 109
Macintosh system requirements ............................................................................... 109
Hardware requirements .......................................................................... 109
Supported printer drivers for Mac ........................................................................... 109
Change printer-driver settings for Mac ..................................................................... 109
Printing-system software ........................................................................................................ 110
PDEs .................................................................................................................... 110
HP Embedded Web Server ..................................................................................... 110
Online help .......................................................................................................... 110
Screen fonts .......................................................................................................... 110
Macintosh installation instructions ........................................................................................... 111
HP LaserJet software CD, Macintosh partition ........................................................... 111
Install the HP LaserJet printing-system software for the Macintosh OS ........................... 111
General installation instructions ................................................................ 111
Mac OS X installation ............................................................................. 112
Main Install dialog box sequence .............................................. 112
Setup instructions ................................................................................... 120
Setting up a printer with Mac OS X v10.5 and v.10.6 ................. 120
Troubleshooting the product setup ............................................. 123
Remove software from Mac operating systems ......................................................................... 124
HP Printer Utility for Mac ....................................................................................................... 125
Access to the HP (Printer) Utility ............................................................................... 125
Information and support area ................................................................................. 127
Supplies Status ....................................................................................... 127
Device Information ................................................................................. 128
File Upload ........................................................................................... 128
Upload Fonts ......................................................................................... 129
Update Firmware ................................................................................... 130
ENWW
vii
Marketsplash by HP ................................................................................ 131
Commands ............................................................................................ 131
Printer Settings ...................................................................................................... 132
Supplies Management ............................................................................ 132
Economode & Toner Density .................................................................... 133
Resolution ............................................................................................. 134
Trays Configuration ................................................................................ 135
Output Devices ...................................................................................... 135
Duplex mode ......................................................................................... 136
Protect Direct Ports .................................................................................. 137
Network Settings .................................................................................... 138
Additional Settings ................................................................................. 140
5 Engineering details ....................................................................................................... 141
Introduction ......................................................................................................................... 141
Paper attributes and commands ............................................................................................. 142
Paper-source commands ........................................................................................ 142
Paper-type commands examples ............................................................................. 142
File to E-mail utility ............................................................................................................... 143
Index ............................................................................................................................... 145
viii
ENWW
List of tables
Table 1-1 Installer CD languages ............................................................................................................ 4
Table 1-2 Supported print driver languages ............................................................................................. 7
Table 1-3 Installer component languages ................................................................................................. 8
Table 1-4 Documentation languages ....................................................................................................... 9
Table 1-5 Software components for Windows ........................................................................................ 10
Table 1-6 Automatic discovery and driver configuration through bidirectional communication1 ..................... 14
Table 1-7 HP Embedded Web Server Information tab ......................................................................... 19
Table 1-8 HP Embedded Web Server General tab ................................................................................ 20
Table 1-9 HP Embedded Web Server Print tab ..................................................................................... 21
Table 1-10 HP Embedded Web Server Troubleshooting tab ................................................................ 21
Table 1-11 HP Embedded Web Server Security tab .............................................................................. 21
Table 1-12 HP Embedded Web Server Other Links list ......................................................................... 22
Table 2-1 Windows software component support ................................................................................... 26
Table 3-1 Supported paper and print media sizes ................................................................................... 64
Table 3-2 PCL 6 custom paper sizes ...................................................................................................... 66
Table 3-3 Font Attribute settings for new and preset watermarks ........................................................... 78
Table 3-4 Page orientation ................................................................................................................... 83
Table 3-5 Driver mopier mode and collation settings ............................................................................. 104
Table 5-1 Paper-source commands ...................................................................................................... 142
Table 5-2 Paper-type commands ......................................................................................................... 142
ENWW
ix
x
ENWW
List of figures
Figure 1-1 Accessing User Guide from Windows Start menu ...................................................................... 4
Figure 1-2 Installer CD documentation screen ........................................................................................... 6
Figure 1-3 About tab ......................................................................................................................... 13
Figure 2-1 Software installation — License agreement screen ................................................................... 32
Figure 2-2 Software installation — Connection Type screen ..................................................................... 33
Figure 2-3 Software installation — Connect your Product now screen ................................................ 34
Figure 2-4 Software installation — Connection Type screen for network connected installation ................. 35
Figure 2-5 Software installation — Network Product(s) Found screen ................................................. 36
Figure 2-6 Software installation — Product Configuration screen ........................................................ 36
Figure 2-7 Software installation — Enable HP Web Services screen .................................................... 37
Figure 2-8 Software installation — Welcome Back screen .................................................................... 39
Figure 2-9 Software installation — More Options screen ...................................................................... 40
Figure 2-10 Software installation — Documentation screen .................................................................. 40
Figure 2-11 Software installation — Admin Documentation screen ..................................................... 41
Figure 2-12 Software installation — Admin Software screen ............................................................... 41
Figure 2-13 Software installation — Get Specialized Drivers screen .................................................... 42
Figure 2-14 Software installation — Web Support screen ..................................................................... 42
Figure 2-15 HP Uninstaller utility — Uninstall button ............................................................................. 43
Figure 2-16 HP Uninstaller utility — Reboot Now button ....................................................................... 44
Figure 2-17 HP Uninstaller utility — Reboot Later button ....................................................................... 44
Figure 2-18 Software installation — Welcome Back screen .................................................................. 45
Figure 2-19 Software installation — Uninstall option selected ................................................................ 46
Figure 2-20 Software uninstall — Uninstall button ................................................................................ 46
Figure 2-21 Software uninstall — Reboot Now button .......................................................................... 47
Figure 2-22 Software uninstall — Reboot Later button .......................................................................... 47
Figure 2-23 Windows Control Panel screen ........................................................................................... 48
Figure 2-24 HP Driver Uninstall Utility screen .......................................................................................... 49
Figure 2-25 HP Driver Uninstall Complete screen .................................................................................... 49
Figure 3-1 An Incompatible Print Settings message ......................................................................... 54
Figure 3-2 The default appearance of the Advanced tab ....................................................................... 55
Figure 3-3 Printing Shortcuts tab ........................................................................................................... 59
Figure 3-4 Printing Shortcuts dialog box ........................................................................................... 60
ENWW
xi
Figure 3-5 Paper/Quality tab .......................................................................................................... 61
Figure 3-6 Paper Options group box ................................................................................................ 62
Figure 3-7 Custom Paper Size dialog box ........................................................................................ 63
Figure 3-8 Special Pages dialog— Covers ........................................................................................ 69
Figure 3-9 Print pages on different paper ..................................................................................... 70
Figure 3-10 Effects tab ..................................................................................................................... 72
Figure 3-11 Preview images – Legal on Letter; Scale to Fit off (left) and on (right) ..................................... 74
Figure 3-12 Watermark Details dialog box ........................................................................................... 76
Figure 3-13 Finishing tab .................................................................................................................. 79
Figure 3-14 Print on Both Sides Instructions dialog box .................................................................. 82
Figure 3-15 Pages per sheet preview images .................................................................................... 84
Figure 3-16 Job Storage tab ............................................................................................................. 87
Figure 3-17 Services tab .................................................................................................................... 95
Figure 3-18 Device Settings tab ........................................................................................................ 97
Figure 3-19 Font Substitution Table ................................................................................................ 98
Figure 3-20 HP Font Installer dialog box .......................................................................................... 99
Figure 3-21 About tab ..................................................................................................................... 105
Figure 4-1 Mac installer opening screen .............................................................................................. 112
Figure 4-2 Mac installer Introduction dialog ..................................................................................... 113
Figure 4-3 Mac installer License dialog .............................................................................................. 114
Figure 4-4 Mac installer license agreement dialog ................................................................................ 114
Figure 4-5 Mac installer Destination Select dialog ............................................................................ 115
Figure 4-6 Mac installer Installation Type dialog .............................................................................. 116
Figure 4-7 Mac installer custom installation dialog ................................................................................ 117
Figure 4-8 Mac installer authentication dialog ..................................................................................... 118
Figure 4-9 Mac installerInstallation dialog ........................................................................................ 118
Figure 4-10 Mac installerAdd Printer dialog ..................................................................................... 119
Figure 4-11 Select printer to add dialog .............................................................................................. 119
Figure 4-12 Mac installer Summary dialog ....................................................................................... 120
Figure 4-13 IP location on the Jetdirect page ........................................................................................ 122
Figure 4-14 HP Utility — main screen ............................................................................................... 126
Figure 4-15 HP Utility — Supplies Status screen ............................................................................ 127
Figure 4-16 HP Utility — Device Information screen ...................................................................... 128
Figure 4-17 HP Utility — File Upload screen ................................................................................... 128
Figure 4-18 HP Utility — Upload Fonts screen ............................................................................... 129
Figure 4-19 HP Utility — Update Firmware screen ........................................................................ 130
Figure 4-20 HP Utility — Marketsplash by HP ............................................................................. 131
Figure 4-21 HP Utility — Commands screen ................................................................................... 132
Figure 4-22 HP Utility — Replace Supplies screen ......................................................................... 132
Figure 4-23 HP Utility — Economode & Toner Density dialog ...................................................... 133
Figure 4-24 HP Utility — Resolution dialog .................................................................................... 134
xii
ENWW
Figure 4-25 HP Utility — Trays Configuration screen .................................................................... 135
Figure 4-26 HP Utility — Output Devices screen ............................................................................ 136
Figure 4-27 HP Utility — Duplex Mode screen ............................................................................... 136
Figure 4-28 Protect Direct Ports screen ........................................................................................... 137
Figure 4-29 IPv4 Settings screen ..................................................................................................... 138
Figure 4-30 Bonjour Settings screen .................................................................................................... 139
Figure 4-31 Additional Settings screen ........................................................................................... 140
ENWW
xiii
xiv
ENWW
1
Product basics and Windows
software description
The chapter provides information about these topics:
ENWW
●
Purpose and scope
●
Software availability and localization
●
Windows printing-system software
●
Driver configuration for Windows
●
Use the HP Embedded Web Server
●
Use HP Web Jetadmin software
●
HP ePrint
●
HP Print View Software
1
Purpose and scope
This software technical reference (STR) provides information about, and troubleshooting tips for, the
printing-system software for the product.
This STR is prepared in an electronic format to serve as a quick-reference tool for Customer Care Center
(CCC) agents, support engineers, system administrators, management information systems (MIS)
personnel, and end users, as appropriate.
The following information is included in this STR:
●
Descriptions of drivers, operating systems, and system environments
●
Descriptions of installing and uninstalling the printing-system software components
For information about the location of information within chapters, see the table of contents. An index is
also provided in this STR.
Software availability and localization
This section provides information about the availability of the HP LaserJet Enterprise 600 M601, M602,
and M603 Series Printer printing-system software and related software and firmware.
Printing-system software on the Web
All software that is contained on the installation CD is also available on the Web.
Web deployment is the preferred method for obtaining the latest software. The Web site offers an
option for automatic e-mail notification about new software releases.
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system software is
available for download at the following Web site:
www.hp.com/go/lj600Series_software
In-box printing-system software CD
The software CD for the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product
contains a variety of files for installing the printing-system software on the computer. This section
describes the files that are available on the software CD and provides additional information about
support and availability.
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system software CD is
divided into two partitions, one for Windows operating systems and one for Macintosh operating
systems.
The files in each partition include documentation files and files that are required in order to install and
uninstall the printing-system components.
2
Chapter 1 Product basics and Windows software description
ENWW
HP LaserJet software CD, Windows partition
NOTE: For information about the contents of the Macintosh partition of the HP LaserJet Enterprise 600
M601, M602, and M603 Series Printer printing-system software CD, see HP LaserJet software CD,
Macintosh partition on page 111.
The root directory in the Windows partition of the software CD contains the AUTORUN.EXE file, the
SETUP.EXE file, and the following directories:
●
Drivers
NOTE: The file hpcm600c.inf is for a 32-bit install and hpcm600u.inf is for a 64-bit install.
●
Installer
●
Installer Content
●
Languages
●
Prerequistes
●
Setup
●
Utilities
The Utilities folder contains the files to run this stand-alone utility:
●
FileToEmail
CD versions and language support
The user guide is provided in two versions, the basic User Guide and the full User Guide.
The basic user guide is a reduced user guide and can be found on the in-box software CD. The full
User Guide contains all the product use information and can be found at www.hp.com.
There are two formats for the basic User Guide included on the in-box software CD; .Pdf and .Chm.
.Pdf files are included in 30 languages and can be viewed while running the installer.
.Chm files are included in 38 languages, have a smaller file size, and 30 of the languages are
installed on your PC by default when the installer is run from the in-box software CD.
Both the .Pdf and .Chm formats contain the same information but the formatting is different.
ENWW
Software availability and localization
3
The User Guide can be found in the Start menu by clicking Start\All Programs\HP\HP LaserJet
600 M601 M602 & M603.
Figure 1-1 Accessing User Guide from Windows Start menu
The User Guides can also be found on the hard disk here:
●
\\CD ROOT\Documents\program files\HP\HP LaserJet 600 M601 M602 M603\Help_Learn
One of the following 30 languages will be installed automatically.
Table 1-1 Installer CD languages
4
Language
iso4lang
English
emww
French (Francais)
frww
German (Deutsch)
deww
Italian (Italiano)
itww
Spanish (Espanol)
esww
Bulgarian
bgww
1
Simplified Chinese
zhcn
Catalan (El catala)
caww
Croatian (Hrvatski)
hrww
Czech (Cestina)
csww
Danish (Dansk)
daww
Dutch (Nederlands)
nlww
Chapter 1 Product basics and Windows software description
ENWW
Table 1-1 Installer CD languages (continued)
Language
iso4lang
Estonian (Esti)
etww
1
Finnish (Suomi)
fiww
Greek
elww
Hungarian (Magyar)
huww
Bahasa Indonesian
idww
Japanese
jaww
Kazakh
kkww
1
Korean
koww
Latvian (Latviesu)
Lithuanian (Lietuvislai)
1
ltww
Norwegian (Norsk)
noww
Polish (Polski)
plww
Portuguese (Portugues)
ptww
Romanian (Romana)
roww
Russian
ruww
Serbian
srww
1
Slovak (Sloveneina)
skww
Slovenian (Slovenseina)
slww
Swedish (Svenska)
svww
Thai
thww
Traditional Chinese
zhtw
Turkish (Turkce)
trww
Ukrainian
ukww
1
Vietnamese
1
lvww
1
1
viww
Arabic
arww
Hebrew
heww
Not installed automatically but can be found on the CD at: \\CD ROOT\documents\program files\HHP LaserJet 600 M601
M602 M603\Help_Learn
NOTE: Ukrainian is also included in .Pdf format on the CD but cannot be viewed during install.
The User Guide in .Pdf format for 30 languages can be viewed during install or opened from the CD.
All of the user guides in .Pdf format can be opened from the CD at \\CD ROOT\documents.
ENWW
Software availability and localization
5
When the in-box software Installer CD is run, the user guide can be viewed by clicking More
Options, Documentation, then User Guide (CD). The Installer CD screen is shown in Figure 1-2
Installer CD documentation screen on page 6.
Figure 1-2 Installer CD documentation screen
6
Chapter 1 Product basics and Windows software description
ENWW
Driver languages
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product provides driver support
in the following languages.
Table 1-2 Supported print driver languages
ENWW
Component
Language list
HP PCL 6 Print Driver
●
Arabic
●
Japanese
HP PCL 5 Universal Print Driver
●
Bulgarian
●
Korean
HP PCL 6 Universal Print Driver
●
Catalan
●
Latvian
HP PS Universal Print Driver
●
Croatian
●
Lithuanian
●
Czech
●
Norwegian
●
Danish
●
Polish
●
Dutch
●
Portuguese
●
English
●
Romanian
●
Estonian
●
Russian
●
Finnish
●
Serbian
●
French
●
Slovak
●
German
●
Slovenian
●
Greek
●
Spanish
●
Hebrew
●
Swedish
●
Hungarian
●
Thai
●
Italian
●
Turkish
●
Ukrainian
●
Simplified Chinese
●
Traditional Chinese
Software availability and localization
7
Installer languages
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product provides installer
component support in the following languages.
Table 1-3 Installer component languages
8
Component
Language list
Administrator install
●
Arabic
●
Korean
Common Windows Installer
●
Bahasa Indonesian
●
Norwegian
Web Registration
●
Catalan
●
Polish
NOTE: Web Registration is run
when the install is complete, and is
not installed on the user's system.
●
Croatian
●
Portuguese
●
Czech
●
Romanian
●
Danish
●
Russian
●
Dutch
●
Slovak
●
English
●
Slovenian
●
Finnish
●
Spanish
●
French
●
Swedish
●
German
●
Thai
●
Greek
●
Turkish
●
Hebrew
●
Simplified Chinese
●
Hungarian
●
Traditional Chinese
●
Italian
●
Japanese
Chapter 1 Product basics and Windows software description
ENWW
Documentation languages
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product provides
documentation in the following languages.
Table 1-4 Documentation languages
Component
●
●
HP LaserJet Enterprise 600
M601, M602, and M603
Series Printer Driver
Preconfiguration User Guide
(Available in English only)
●
Arabic
●
Korean
●
Bulgarian
●
Latvian
●
Catalan
●
Lithuanian
HP JetDirect Administrator's
Guide (.PDF file) (with the
following exceptions)
●
Croatian
●
Norwegian
●
Czech
●
Polish
●
Danish
●
Portuguese
●
Dutch
●
Romanian
●
English
●
Russian
●
Estonian
●
Serbian
●
Finnish
●
Slovak
●
French
●
Slovenian
●
German
●
Spanish
●
Greek
●
Swedish
●
Hebrew
●
Thai
●
Hungarian
●
Turkish
●
Italian
●
Ukrainian
●
Japanese
●
Simplified Chinese
●
Traditional Chinese
◦
◦
●
ENWW
Language list
Catalan documentation in
Spanish only
No documentation in
Arabic, Bulgarian, Czech,
Greek, Hebrew, Croatian,
Estonian, Lithuanian,
Latvian, Romanian,
Slovak, Slovenian,
Serbian, Turkish,
Ukrainian
HP LaserJet Enterprise 600
M601, M602, and M603
Series Printer Install Notes
(.HTML file)
Software availability and localization
9
Windows printing-system software
This section contains information about the following topics:
●
Windows printing-system software
●
HP LaserJet print drivers
Windows printing-system software
Table 1-5 Software components for Windows
Component
Description
HP installer
Installs the printing-system software based on the hardware it detects from the host computer.
Uninstaller
Removes files and folders that were installed when the printing-system software was originally
installed on the computer.
File-to-email Utility
Collects crash logs and attaches the data files to an e-mail to assist troubleshooting an installation
or operation failure.
Driver software
Use the driver software to print with the computer and the product.
This software includes the following drivers:
Help & Learn Center
●
The HP PCL 6 print driver. The HP PCL 6 print driver is installed by default.
●
The HP PCL 5 Universal Printer Driver (UPD). This print driver is not installed by default. To
install the HP PCL 5 UPD, download it from www.hp.com/go/upd, and then use the
Microsoft Add Printer Wizard.
●
The HP PS Universal Print Driver (UPD). This print driver is not installed by default. To install
the HP PS UPD, download it from www.hp.com/go/upd, and then use the Microsoft Add
Printer Wizard.
●
The HP PCL 6 Universal Printer Driver (UPD). This print driver is not installed by default. To
install the HP PCL 6 UPD, download it from www.hp.com/go/upd, and then use the
Microsoft Add Printer Wizard.
This program provides help for using the product, as well as links to Web sites for product support
and supplies ordering.
HP LaserJet print drivers
Print drivers provide the printing features and communication between the computer and the product.
The software CD includes software for end users and network administrators who are working in the
following operating environments:
10
Chapter 1 Product basics and Windows software description
ENWW
Operating systems supported for the print drivers
HP PCL 6 discrete, HP UPD PCL 5, HP UPD PCL 6, HP UPD PS, and Mac drivers
Windows XP SP 2 or greater (32-bit and 64-bit)
Windows Server 2003 SP 1 or greater (32 bit and 64 bit)
Windows Server 2008 (32-bit and 64-bit)
Windows Server 2008 R2 (64-bit)
Windows Vista (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Mac OS X 10.5, OS X 10.6
NOTE: Print driver for Mac OS X 10.7 available from Apple Software Update
Operating systems supported for the installer CD
The HP PCL 6 discrete driver and .NET 3.5 is installed for Windows operating systems, the Mac
driver is installed for Mac operating systems
Windows XP SP 2 or greater (32-bit)
Windows Server 2003 SP 1 or greater (32 bit only)
Windows Server 2008 (32-bit and 64-bit)
Windows Server 2008 R2 (64-bit)
Windows Vista (32-bit and 64-bit)
Windows 7, including starter edition (32-bit and 64-bit)
Mac OS X 10.5, OS X 10.6
NOTE: Print driver for Mac OS X 10.7 available from Apple Software Update
In Windows operating systems the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer
print driver supports preconfiguration, automatic configuration, and driver updates after installation.
NOTE: For additional information about installing the printing-system software, see the HP LaserJet
Enterprise 600 M601, M602, and M603 Series Printer Install Notes on the printing-system software
CD.
All of the drivers provide access to the paper-handling and print quality configuration settings
supported by this printer.
ENWW
Windows printing-system software
11
HP PCL 6 Print Driver, PCL 6 Universal Print Driver, PCL 5 Universal Print
Driver, and PS Universal Print Driver
All of the Windows drivers are supported by Microsoft 32-bit and 64-bit operating systems. The
HP PCL 6 driver is included on the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer
printing-system software CD. The PCL 6 and PCL 5 Universal Print Drivers and the PS Universal Print
Driver are available for download at the following Web site:
www.hp.com/go/upd
NOTE: The HP PCL 6 Print Driver is installed by default.
Printer-driver version numbers for Windows operating systems
Access to printer-driver version numbers varies, depending on the operating system in which the
product is installed.
NOTE: For a list of HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer print drivers,
updated HP printing-system software, and product-support information, go to:
www.hp.com/go/lj600Series_software
If you are using an HP print driver in a Windows environment, follow these steps to find driver-version
information:
1.
In Windows Vista and Windows 7, click the Start button, click Control Panel, click
Hardware and Sound, and then click Printers.
In Windows XP, Windows Server 2003, and Windows Server 2008, click Start, click Settings,
and then click Printers and Faxes.
12
2.
Right-click the product icon.
3.
In Windows Vista, Server 2003 and XP click Properties, in Windows 7 and Server 2008 click
Printer Properties.
Chapter 1 Product basics and Windows software description
ENWW
4.
Click the About tab.
Figure 1-3 About tab
NOTE: The HP PCL 6 print driver is installed by default when using the installer CD. It can also
be downloaded from www.hp.com with an installer or just the driver. In all cases, the driver will
be listed as UPD Version 5.3.0.10295. This refers to the HP PCL 6 driver version NOT the
UPD driver version as stated. This may be removed in a future version of the driver.
You can also gain information about driver versions by clicking the About button that appears on most
driver tabs.
ENWW
Windows printing-system software
13
Driver configuration for Windows
The HP print drivers feature bidirectional communication technology which, in supported environments,
provide automatic discovery and driver configuration for product accessories at the time of installation.
Some accessories that are automatically discovered and configured include the duplexing unit, optional
paper trays, printer hard disk, and dual inline memory modules (DIMMs).
Driver autoconfiguration
Automatic discovery and driver configuration through bidirectional communication occurs in the
following circumstances:
●
When a print driver is installed by using the installer
●
When using the Update Now feature for a driver that is already installed
However, as shown in the following table, driver autoconfiguration and Update Now are not available
in Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, or Windows 7
operating systems over a direct connection (USB) when the product is installed by using the Add Printer
Wizard.
Table 1-6 Automatic discovery and driver configuration through bidirectional communication1
1
Connection type
Add Printer Wizard install
Common installer
Network
Yes
Yes
Direct connection
No
Yes
The table applies to Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, and Windows 7.
Bidirectional communication
In environments that support bidirectional communication, the computer communicates with the product
during installation, determines the physical configuration, and then configures the driver accordingly.
Bidirectional communication is the capability of the product to respond to data inquiries from the
computer and report information back, such as what type of print paper is available or what
accessories are connected to the product. Bidirectional communication depends on the network
operating system and on the type of connection that exists between the computer and the product. If the
connection does not have this capability (that is, if it has no bidirectional mode), it can only accept
commands from the host and cannot report information back to the host computer.
Enterprise AutoConfiguration
Enterprise AutoConfiguration (EAC) uses bidirectional communication to provide autoconfiguration
functionality for installation of the print driver over a network, whether you use the installer on the
printing-system software CD or the Add Printer Wizard to install the driver. Driver installation that
includes EAC is configured with the same settings as the physical configuration of the product.
Configuration occurs without user interaction.
14
Chapter 1 Product basics and Windows software description
ENWW
If bidirectional-communication software has been installed previously, EAC is not activated, and the
pre-existing bidirectional-communication software is used to configure the print driver.
If bidirectional communication software has not been installed, EAC installs bidirectionalcommunication software that allows it to communicate with the product and automatically match the
print driver with the actual product configuration. EAC is activated during installation of the driver or
whenever the Update Now feature is used.
If the product configuration changes after installation, the driver can be automatically updated with the
new configuration in environments that support bidirectional communication by using the Update Now
feature. For more information, see Update Now on page 15.
Update Now
If you have modified the configuration of the HP LaserJet Enterprise 600 M601, M602, and M603
Series Printer product since installation, the driver can be automatically updated with the new
configuration in environments that support bidirectional communication. Use the Update Now feature to
automatically reflect the new configuration in the driver.
For example, if the product is installed and an optional paper-handling accessory is added later, use
the Update Now feature to query the product and update the settings to match the new product
configuration.
The feature automatically updates the registry and changes the configuration information that appears
on the Device Settings tab.
NOTE: Depending on which settings were updated, the Update Now feature might change the
configuration information that displays on the print-driver tabs, instead of (or in addition to) changing
the information on the Device Settings tab.
NOTE: The Update Now feature is not supported in environments where shared Windows XP clients
are connected to Windows XP hosts.
To activate the Update Now feature, follow these steps:
1.
In Windows Vista and Windows 7, click the Start button, click the Control Panel item, click the
Hardware and Sound item, and then click the Printers item.
In Windows XP, Windows Server 2003, and Windows Server 2008, click the Start button, click
the Settings item, and then open the Printers and Faxes item.
ENWW
2.
Right-click the product name.
3.
Click the Properties item, or the Printer Properties item in Windows 7 and Server 2008.
4.
Click the Device Settings tab.
5.
If necessary, click the Installable Options list to expand it and show the options.
6.
In the Automatic Configuration drop-down menu, select the Update Now item.
7.
Click the OK button to save the setting.
Driver configuration for Windows
15
HP Driver Configuration
HP Driver Configuration is a software architecture and set of tools that permits HP printing-system
software to be customized and distributed in managed corporate printing environments. Using
HP Driver Configuration, information technology (IT) administrators in corporate and enterprise
environments can preconfigure the printing and device defaults for HP print drivers before installing the
drivers in the network environment.
HP Driver Configuration is most beneficial when configuring print drivers for multiple workstations or
print servers for print queues that share the same configuration. Two types of features can be
configured:
●
Product settings
●
Printing-preferences settings
The driver is configured to match the product hardware so that access to all of the product accessories
through the driver is enabled correctly (for example, for duplexing units and additional input trays).
Most driver-feature settings can also be configured.
HP Driver Configuration configures the driver to match the accessories that are installed on the product,
or to match the settings that IT administrators make in the configuration (.CFG) file (for example,
optional trays, total amount of memory, job-storage settings, or mopier settings).
The configuration process consists of three basic steps:
●
Driver acquisition
●
Driver configuration
●
Driver installation and deployment
These steps can be accomplished in different ways, depending on the tool that is being used to define
the configuration.
The driver configuration process is supported through three distinct tools. All three are designed with
the same basic user-interface (UI) controls for interacting with the .CFG file, but are packaged
differently, either to support established product installation workflows or to leave the deployment and
installation of the driver entirely up to the user. The following tools support driver preconfiguration:
●
HP Driver Configuration Utility. The HP Driver Configuration Utility is a small, standalone,
Windows-software program that the administrator can use to open the .CFG file that is associated
with a particular driver and make modifications that are applied when that driver is installed on
the target computer. It is intended for use in environments that have an established process for
deploying drivers. This is the preconfiguration tool of choice to support any Novell or HP Print
Server Appliance (PSA) and Point and Print environments. It is used in the way that any ordinary
Windows software program is used.
The HP Driver Configuration Utility is available at the following Web site:
www.hp.com/go/dcu
◦
16
HP Driver Deployment Utility. The HP Driver Deployment Utility (HP DDU) was created
to simplify the deployment of print drivers onto a client computer. It is a simple utility that
packages the print-driver files, and the code needed to deploy them, into two files: an .EXE
Chapter 1 Product basics and Windows software description
ENWW
file and a .CAB file. These files are run on the client computer to copy the print-driver files to
the Windows driver store and, for network packages, to install the product. This utility is
supported on Windows XP, Windows 7, Windows Server 2003, Windows Server 2008,
and Windows Vista operating systems.
●
HP Web Jetadmin Driver Configuration. HP Web Jetadmin provides a queue-creation
program that can be used to create printer queues on Windows XP, and Windows Server 2003.
HP Web Jetadmin Driver Configuration adds a number of screens to the existing queue-creation
workflow from which the drivers that are being installed for the queues can be customized as part
of the process. HP Web Jetadmin Driver Configuration is limited to Internet Explorer browsers.
Netscape Navigator is not supported.
HP Web Jetadmin is supported by the following:
◦
Windows XP (Professional only)
◦
Windows Server 2003 (R2 only)
◦
Windows Server 2008
◦
Windows Vista (Business and Enterprise Editions)
◦
Windows 7
The HP Web Jetadmin print management features are supported by the following:
◦
Windows XP Professional (with Service Pack 2 or higher)
◦
Windows Server 2003
To gain access to the HP DDU, insert the software CD into the CD-ROM drive, and then navigate to the
Driver Deployment Utility folder.
For detailed information about gaining access to and installing these tools, see the HP Driver
Configuration Support Guide at the following Web site and click on the Manuals link.
www.hp.com/go/ddu
ENWW
Driver configuration for Windows
17
Use the HP Embedded Web Server
Use the HP Embedded Web Server to view product status, configure product network settings, and to
manage printing functions from your computer instead of from the product control panel. The following
are examples of what you can do using the HP Embedded Web Server:
●
View product status information.
●
Determine the remaining life for all supplies and order new ones.
●
View and change tray configurations.
●
View and change the product control-panel menu configuration.
●
View and print internal pages.
●
Receive notification of product and supplies events.
●
View and change network configuration.
To use the HP Embedded Web Server, your browser must meet the following requirements:
●
Windows: Microsoft Internet Explorer 5.01 or later or Netscape 6.2 or later
●
Mac OS X: Safari or Firefox using Bonjour or an IP address
●
Linux: Netscape Navigator only
●
HP-UX 10 and HP-UX 11: Netscape Navigator 4.7
The HP Embedded Web Server works when the product is connected to an IP-based network. The HP
Embedded Web Server does not support IPX-based product connections. You do not have to have
Internet access to open and use the HP Embedded Web Server.
When the product is connected to the network, the HP Embedded Web Server is automatically
available.
NOTE: For complete information about using the HP Embedded Web Server, see the HP Embedded
Web Server User Guide, which is on the HP website at www.hp.com/support/lj600Series.
Open the HP Embedded Web Server by using a network
connection
1.
Identify the product IP address or host name.
Open the following menus:
18
1.
Administration
2.
Reports
3.
Configuration/Status Pages
Chapter 1 Product basics and Windows software description
ENWW
NOTE: If the product has been configured to display its IP address on the control panel, touch
How to Connect and then touch Network Address from the Main Menu to display the IP address.
2.
Use the down arrow button
button.
to highlight the Configuration Page item, and then press the OK
3.
Use the up arrow button
4.
Locate the IP address or host name on the HP Jetdirect page.
to highlight the Print item, and then press the OK button.
NOTE: Mac OS X users can also reference the Bonjour (mDNS) name located on the
configuration page to access the Embedded Web Server from the Safari browser.
5.
In a supported Web browser on your computer, type the product IP address or host name in the
address/URL field.
Features
Information tab
Table 1-7 HP Embedded Web Server Information tab
ENWW
Menu
Description
Device Status
Shows the product status and shows the estimated life remaining of HP supplies. The
page also shows the type and size of paper set for each tray. To change the default
settings, click the Change Settings link.
Job Log
Shows the print jobs printed on the product and provides the capability to view and
export the details for the print jobs.
Configuration Page
Shows the information found on the configuration page.
Supplies Status Page
Shows a detailed status of the installed HP supplies.
Event Log Page
Shows a list of all product events and errors. Use the HP Instant Support link (in
the Other Links area on all HP Embedded Web Server pages) to connect to a set
of dynamic Web pages that help you solve problems. These pages also show
additional services available for the product.
Usage Page
Shows a summary of the number of pages the product has printed, grouped by
size, type, and paper print path.
Device Information
Shows the product network name, address, and model information. To customize
these entries, click the Device Information menu on the General tab.
Control Panel Snapshot
Provides an inactive view of the control panel of the product.
Use the HP Embedded Web Server
19
Table 1-7 HP Embedded Web Server Information tab (continued)
Menu
Description
Print
Allows uploading a file from your hard disk or network file server to be printed. The
following file types are supported:
Printable Reports and Pages
●
.txt
●
.ps
●
.pdf
●
.pcl
●
.cht
●
.prn
Lists the internal reports and pages for the product. Select one or more items to print
or view.
General tab
Table 1-8 HP Embedded Web Server General tab
20
Menu
Description
Alerts
Set up e-mail alerts for various product and supplies events.
Control Panel Administration
Menu
Provides a remote view of the Administration menu available at the control panel
of the product.
AutoSend
Configure the product to send automated e-mails regarding product configuration
and supplies to specific e-mail addresses.
Edit Other Links
Add or customize a link to another website. This link appears in the Other Links
area on all HP Embedded Web Server pages.
Ordering Information
Add additional information to be used when ordering supplies. This information is
displayed on the Supplies Status Page.
Device Information
Name the product and assign an asset number to it. Enter the name of the primary
contact who will receive information about the product.
Language
Set the language in which to display the HP Embedded Web Server information.
Date and Time
Set the date and time or synchronize with a network time server.
Energy Settings
Set the sleep schedule and sleep timer settings for the product.
Backup and Restore
Create a backup file that contains product and user data. If necessary, you can use
this file to restore data to the product.
Restore Factory Settings
Restore the product settings to the factory default settings.
Solution Installer
Install third-party software programs that can enhance the product functionality.
Firmware upgrade
Download and install product firmware upgrade files.
Statistics Services
Displays the name of, or add/remove the connection to, a job statistics service used
by the product.
Chapter 1 Product basics and Windows software description
ENWW
Print tab
Use the Print tab to enable or disable walk-up USB printing. Jobs printed from USB will use the default
print settings. the following file types are supported for walk-up USB printing:
●
.pdf
●
.prn
●
.pcl
●
.ps
●
.cht
Table 1-9 HP Embedded Web Server Print tab
Menu
Description
Retrieve from USB
Setup Setup
Use this item to enable or disable this feature.
Manage Stored Jobs
Use this feature to manage jobs stored on the product memory.
Adjust Paper Types
Adjust the factory default setting for select paper types.
General Print Settings
Use this item to manage the print settings for this product.
Manage Trays
Use this item to manage the tray settings for this product.
Troubleshooting tab
Table 1-10 HP Embedded Web Server Troubleshooting tab
Menu
Description
General Troubleshooting
Perform reports and tests, and enable auto recovery.
Firmware upgrade
Download and install product firmware upgrade files.
Restore Factory Settings
Restore the product settings to the factory default settings.
Security tab
Table 1-11 HP Embedded Web Server Security tab
Menu
Description
General Security
Configure an administrator password so you can restrict access to certain features
on the product.
Enable or disable the Host USB port on the control panel or the USB connectivity
port on the formatter for printing directly from a computer.
Access Control
ENWW
Configure access to product functions for specific individuals or groups. Also select
the method by which individuals sign in to the product.
Use the HP Embedded Web Server
21
Table 1-11 HP Embedded Web Server Security tab (continued)
Menu
Description
Protect Stored Data
Configure and manage the internal hard drive for the product. This product includes
an encrypted hard drive for maximum security.
Configure settings for jobs that are stored on the product hard drive.
Certificate Management
Install and manage security certificates for access to the product and the network.
HP Web Services
Use the HP Web Services tab to enable or disable the HP Web Services feature.
Networking tab
Use the Networking tab to change network settings for the product when it is connected to an IPbased network. This tab does not appear if the product is connected to other types of networks.
Other Links list
NOTE: You can configure which items appear in the Other Links list by using the Edit Other
Links menu on the General tab. The following items are the default links.
Table 1-12 HP Embedded Web Server Other Links list
22
Menu
Description
HP Instant Support
Connects you to the HP website to help you find solutions to product problems.
Shop for Supplies
Connects you to the HP website for ordering supplies.
Product Support
Connects to the support site for the product, from which you can search for help
regarding various topics.
Chapter 1 Product basics and Windows software description
ENWW
Use HP Web Jetadmin software
HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and
troubleshooting network-connected peripherals. Management is proactive, allowing network
administrators the ability to resolve issues before users are affected. Download this free, enhancedmanagement software at www.hp.com/go/webjetadmin.
NOTE: HP Web Jetadmin is not supported from Mac OS X.
HP ePrint
HP ePrint is a service that allows you to print directly to certain HP products by sending an e-mail to the
product e-mail address. HP ePrint lets you print from any smart phone or computer without installing any
special drivers or software.
In order to use HP ePrint, the product Web Services feature must be enabled. Complete the following
steps.
1.
Print a configuration page and locate the IP address.
2.
At the computer, open a Web browser, type the IP address in the address line, and then press the
Enter key. The HP Embedded Web Server (EWS) opens.
3.
Click the HP Web Services tab.
4.
Click the Enable HP Web Services button.
5.
When the HP Web Services feature is enabled, ePrint information appears in the HP EWS. An email address is automatically assigned to the product. The product also prints an HP Web Services
page that contains this e-mail address and instructions for using the service.
Configure HP ePrint
Web: For all supported HP products, use the HP ePrintCenter Web site to define security settings
and to configure default print settings for all HP ePrint jobs sent to this product.
a.
Go to www.hpeprintcenter.com.
b.
Click Sign In to enter your HP ePrintCenter credentials or to sign up for a new account.
c.
Select your product from the list, or click + Add printer to add it. To add the product, you
need the printer code, which is the segment of the product e-mail address that is before the @
symbol.
NOTE: This code is valid for only 24 hours. If you do not log into the ePrintCenter within
24 hours of enabling HP Web Services, the code expires. If the code expires, follow the
instructions to enable HP Web Services again, and obtain a new code. Once you log into
the ePrintCenter (www.hpeprintcenter.com) within 24 hours, the ePrint email address of the
printer does not change.
ENWW
Use HP Web Jetadmin software
23
d.
To prevent your product from printing unexpected documents, click ePrint Settings, and
then click the Allowed Senders tab. Click Allowed Senders Only, and add the e-mail
addresses from which you want to allow ePrint jobs.
e.
To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click
Print Options, and select the settings that you want to use.
HP Print View Software
Use HP Print View software to change various print settings and see immediately how those changes
affect your document. When you are satisfied with the print settings, print the job directly from HP Print
View to your supported printer.
Print View 2.0 supports both print and cost estimation.
Download HP Print View Software, and determine which products are supported, from the following
location:
www.hp.com/go/ihm
24
Chapter 1 Product basics and Windows software description
ENWW
2
Install Windows software and
utilities
Introduction
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product comes with software
and installers for Microsoft Windows and Apple, Inc., Macintosh systems. Linux and UNIX systems are
supported, and software is available on the Web.
This chapter provides procedures for installing and removing the HP LaserJet Enterprise 600 M601,
M602, and M603 Series Printer printing-system software for Windows operating systems. The chapter
provides information about these topics:
●
Supported operating systems for Windows
●
Install overview
●
Detailed Microsoft Windows installation instructions
●
Install optional software
●
Uninstall software
NOTE: If the computer is running a 64-bit Windows operating system, you must install the
corresponding 64-bit print driver.
If you are installing through the Add Printer Wizard, the files are as follows:
hpcm600c.inf = 32 bit
hpcm600u.inf = 64 bit
ENWW
Introduction
25
Supported operating systems for Windows
Windows operating systems provide full-featured support for the HP LaserJet Enterprise 600 M601,
M602, and M603 Series Printer product. Operating systems that are not described here provide
varying levels of functionality.
Windows XP is used to denote Windows XP Home Edition, Windows XP Professional, and Windows
XP Media Edition unless noted otherwise. Windows Vista is used to denote Windows Vista Home
Basic, Windows Vista Home Premium, Windows Vista Business, Windows Vista, and Windows Vista
Ultimate unless noted otherwise. Windows 7 is used to denote Windows 7 Basic, Windows 7 Home
Premium, Windows 7 Professional, Windows 7 Enterprise, and Windows 7 Ultimate
Table 2-1 Windows software component support
Windows XP,
SP 2 and
greater (32-bit
and 64-bit)
Windows Server 2003
(32-bit and 64-bit)
Windows Server 2008
(32-bit, 64-bit, and R2
edition)
Windows Vista
(32-bit and
64-bit)
Windows 7
(32-bit and
64-bit)
HP UPD PCL5
driver
x
x
x
x
x
HP UPD PCL6
driver
x
x
x
x
x
HP UPD PS driver
x
x
x
x
x
Discrete PCL6
driver
x
x
x
x
x
Installer CD
(Windows/Mac)
x (32–bit only)
x (32–bit only)
x
x
x
HP MPA
x (32–bit only)
x (32–bit only)
x (32–bit only)
x (32–bit only)
x (32–bit only)
HP DDU
x
x
x
x
x
HP DCU
x
x
x
x
x
In any of the supported operating systems, you must have administrator privileges to install the product
printing-system software.
For more information about the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer
product, go to the following Web site:
www.hp.com/support/lj600Series
System requirements
The system requirements for installing and using the HP LaserJet Enterprise 600 M601, M602, and
M603 Series Printer printing-system software for Windows and Macintosh are as follows:
26
Chapter 2 Install Windows software and utilities
ENWW
NOTE: The installer CD will run on both operating systems.
●
Same system requirements for running the supported Windows operating system (OS)
●
Latest operating system updates installed through Windows Update
●
200 MB of available hard-disk space
●
Mac OS X v10.5, v10.6, and v10.7 (v10.7 drivers available through Apple Software Update)
with 175 MB of free hard-disk space
●
CD drive, DVD drive, or Internet connection
●
Dedicated universal serial bus (Hi-Speed USB) connectivity port or network connection
Print driver and other software support links
●
Software support: www.hp.com/go/lj600Series_software
●
Product manuals: www.hp.com/go/lj600Series_manuals
●
General product support: www.hp.com/support/lj600Series
●
HP UPD (Universal Print Driver – PCL6, PCL5, PS): www.hp.com/go/upd
●
HP MPA (Managed Print Administrator – used with UPD): www.hp.com/go/mpa
●
HP DDU (Driver Deployment Utility – used to package and deploy drivers in large environments –
can even perform installations silently (no user intervention)): www.hp.com/go/ddu
●
HP DCU (Driver Configuration Utility – used to configure drivers prior to deployment – e.g. set twosided printing as default): www.hp.com/go/dcu
●
Citrix and Windows Terminal Services: For the latest support, see: www.hp.com/go/upd
documentation tab, then open the System Administrator’s Guide
●
Linux. For more information, go to the following Web site: www.hplip.net
●
UNIX drivers and model scripts. www.hp.com/go/unix, www.hp.com/go/unixmodelscripts,
and www.hp.com/go/jetdirectunix_software
●
Novell: www.novell.com/iprint
●
SAP device types and configuration files:
www.hp.com/go/sap/print and www.hp.com/go/sap/drivers
●
Smart Web Printing - a simple browser plug-in that enables you to select and clip, or select and
print web pages:
www.hp.com/global/us/en/consumer/digital_photography/free/software/smart-webprinting.html
●
ENWW
Print View (In-house Marketing tool/driver): www.hp.com/go/ihm
Supported operating systems for Windows
27
28
●
HP WJA (Web Jetadmin – used in large/managed environments to manage printers, deploy
drivers, update firmware, etc.): www.hp.com/go/webjetadmin
●
HP ePrint: www.eprintcenter.com
●
HP ePrint Mobile driver: www.hp.com/go/eprintmobiledriver
●
Mac Airprint: www.hp.com/go/airprint
Chapter 2 Install Windows software and utilities
ENWW
Install overview
The software for the product comes on a single CD. The software installer first checks the versions of
Windows Installer and Microsoft .NET installed on the system, and then installs the printing-system
software from the CD onto the hard disk and updates Windows files.
Depending on the configuration of your computer as well as the installation method selected, the
following components might be installed during the printing-system software installation:
●
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer PCL 6 print driver
●
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer User Guide
●
UnInstall utility
For all of the supported platforms, each install option presents a series of query dialog boxes that guide
you through the installation process.
Software Installer system check
The software installer checks the computer system to ensure that the following Windows features are the
correct version to support the printing-system components.
Microsoft Windows Installer 3.1
When the user starts the installation process, the product software installer checks the computer system
to determine the version number of the Windows Installer currently on the system. If the product
software installer detects that the Windows Installer version is prior to version 3.1, a dialog box
appears alerting the user that the Windows Installer must be updated. The user must click the OK
button to continue. The product software installer then updates the Windows Installer and continues the
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system installation process.
To determine which version of Windows Installer is currently running on the computer, follow these
instructions.
1.
For Windows 7 and Windows Vista, click the Start button, click the Control Panel option, and
then click the Programs option.
For Windows XP and Windows Server 2003, click the Start button, click the Control Panel
option, and then double-click the Add/Remove programs option.
2.
Scroll down until you find the entry for the Windows Installer.
Software installation types for Windows
The product printing-system software can be installed in the following ways:
ENWW
●
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system installer
(Recommended)
●
Microsoft Found New Hardware Wizard (Plug and Play installation)
Install overview
29
Installation options
The printing-system software can be used with the product in the following configurations:
●
Install the printing-system software on a computer that is directly connected to the product through
a USB port.
●
Install the printing-system software on a computer that has access to a wired network to which the
product is connected.
NOTE: A wireless option can be purchased separately.
30
Chapter 2 Install Windows software and utilities
ENWW
Detailed Microsoft Windows installation instructions
The dialog boxes shown here appear in the Windows XP Professional installation sequence. The order
and appearance of dialog boxes can vary among operating systems.
Use the installation CD to install the product software
The recommended Easy installation installs the PCL 6 print driver and user guide.
●
For a USB installation, do not connect the USB cable between the product and the computer yet.
You will be instructed to connect the USB cable during the installation process.
●
For a wired network installation, connect the product to the network before starting the installation
process. The product will need a few minutes to receive a network address.
●
For a wireless network installation, do not connect the USB cable between the product and the
computer yet. You will be instructed to connect the USB cable during the installation process.
A series of dialog boxes appears during installation of the product printing-system software in
Windows environments.
NOTE: You can return to the previous dialog box by clicking the Back button, or exit the printingsystem software installation by clicking the Cancel button.
1.
Close all programs.
2.
Insert the printing system software CD into the CD-ROM drive. The software installer detects the
language of the operating system, and then displays the main menu of the installation program in
the same language.
If the installer program has not started after 30 seconds, complete these steps:
ENWW
a.
On the Start menu, click the Run option.
b.
Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive).
c.
Click the OK button. The installer program starts.
Detailed Microsoft Windows installation instructions
31
3.
Read the license agreement, click the I have reviewed and accept the installation
agreements check box, and then click the Next button to continue to the Connection Type
screen.
Figure 2-1 Software installation — License agreement screen
4.
32
The Preparing to Install screen appears. It may take several minutes before the installer
proceeds to the next screen.
Chapter 2 Install Windows software and utilities
ENWW
5.
Select a connection type option on the Connection Type screen, based on how the product
connects to the computer.
●
For USB-connected products, follow these steps:
a.
Select Directly connect to this computer using a USB cable. and then click
Next.
Figure 2-2 Software installation — Connection Type screen
ENWW
Detailed Microsoft Windows installation instructions
33
b.
Connect the product to the computer when prompted at the Connect your Product
now screen. The installer program opens a progress bar as it automatically starts the
software installation.
Figure 2-3 Software installation — Connect your Product now screen
34
Chapter 2 Install Windows software and utilities
ENWW
●
For wired network connected products, follow these steps:
a.
Select the Connect through a wired network option.
Figure 2-4 Software installation — Connection Type screen for network connected
installation
b.
If the product's network settings are not known, select the Automatically find my
product on the network option.
c.
If the product's networking settings are known, enter either the product's host name, IP
address, or hardware address.
NOTE: The product's network IP address can be obtained at the product control
panel. From the product control panel's Main Menu, select How to Connect and then
press the OK button. Select Network Address and then press the OK button to display
the IP address.
d.
ENWW
Click the Next button.
Detailed Microsoft Windows installation instructions
35
e.
A list of products is displayed on the Network Product(s) Found screen. Select the
product to install and then click the Next button.
Figure 2-5 Software installation — Network Product(s) Found screen
6.
The Product Configuration screen appears.
Figure 2-6 Software installation — Product Configuration screen
36
●
Make this product the default printer by selecting the Set as default printer check box.
●
Send a test page to the product by selecting the Print a test page check box.
Chapter 2 Install Windows software and utilities
ENWW
7.
Click the Next button to proceed to the Enable HP Web Services screen.
Figure 2-7 Software installation — Enable HP Web Services screen
▲
Select the check box next to Yes, open my Web browser to enable HP Web
services for my printer. to navigate to an HP web site and set up the Web services
HP ePrint for your product.
When Web Services are enabled, ePrint information appears in the HP Embedded Web
Server. Look for the e-mail address that is automatically assigned to the product. The product
also prints an HP Web Services page that contains this e-mail address and instructions for
using the service.
-orSelect the check box next to No, do not enable Web services if you do not want
HP Web services enabled for your product. Click the Exit button.
Configure HP ePrint
a.
Go to www.hpeprintcenter.com.
b.
Click Sign In to enter your HP ePrintCenter credentials or to sign up for a new account.
c.
Select your product from the list, or click + Add printer to add it. To add the product, you
need the printer code, which is the segment of the product e-mail address that is before the @
symbol.
NOTE: This code is valid for only 24 hours. If it expires, follow the instructions to enable
HP Web Services again, and obtain a new code.
ENWW
Detailed Microsoft Windows installation instructions
37
8.
38
d.
To prevent your product from printing unexpected documents, click ePrint Settings, and
then click the Allowed Senders tab. Click Allowed Senders Only, and add the e-mail
addresses from which you want to allow ePrint jobs.
e.
To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click
Print Options, and select the settings that you want to use.
Click the Finish button to complete the installation and exit the installer.
Chapter 2 Install Windows software and utilities
ENWW
Install optional software
If you chose not to install optional software during the initial software installation but want to do so
later, complete the following steps.
1.
Insert the printing system software CD into the CD-ROM drive. The software installer detects the
language of the operating system, and then displays the main menu of the installation program in
the same language.
If the installer program has not started after 30 seconds, complete these steps:
a.
On the Start menu, click the Run option.
b.
Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive).
c.
Click the OK button. The installer program starts and opens the Welcome Back screen.
Figure 2-8 Software installation — Welcome Back screen
ENWW
Install optional software
39
2.
Click the More Options button to open the More Options screen.
Figure 2-9 Software installation — More Options screen
3.
Click one of the following buttons to open a corresponding screen with various options.
●
Documentation screen: This screen provides links to the user guide on the product
software CD, the online user guide, and the product readme file.
Figure 2-10 Software installation — Documentation screen
40
Chapter 2 Install Windows software and utilities
ENWW
●
Admin Documentation screen: This screen provides a link to the HP Driver Configuration
Utility User Guide.
Figure 2-11 Software installation — Admin Documentation screen
●
Admin Software screen: This screen provides links to the HP Universal Print Driver Portal,
the HP Web Jetadmin utility, the HP Driver Deployment utility, and the HP Driver
Configuration Utility.
Figure 2-12 Software installation — Admin Software screen
ENWW
Install optional software
41
●
Get Specialized Drivers screen: This screen provides links to the HP Universal Print Driver
Portal and HP Print View software.
Figure 2-13 Software installation — Get Specialized Drivers screen
●
Web Support screen: This screen provides a link to the product support Web page for your
product.
Figure 2-14 Software installation — Web Support screen
42
4.
Click the Back button to return to the More Options screen.
5.
Click the Cancel button to close the installer program.
Chapter 2 Install Windows software and utilities
ENWW
Uninstall software
NOTE: If the print driver was installed by using the HP Driver Installation Utility, follow the instructions
in the Remove the print driver by using the Windows Add or Remove Programs feature on page 48.
If the driver was installed using the Add Printer Wizard, follow the instructions in the Uninstall the print
driver by using the Server Properties feature on page 50.
Use the HP Uninstall utility to remove the product software
The installed software includes a utility to remove the product software.
1.
Click the Windows Start button, click the Programs or All Programs item, and then click the
HP item.
2.
Click the HP LaserJet Enterprise 600, M601, M602 & M603 printer series item, and
then click the Uninstall item. The HP Uninstaller utility opens.
Figure 2-15 HP Uninstaller utility — Uninstall button
ENWW
Uninstall software
43
3.
Click the Uninstall button to begin the removal process. When the process is complete, either
click the Reboot Now button, or clear the check box and click the Reboot Later button.
Figure 2-16 HP Uninstaller utility — Reboot Now button
Figure 2-17 HP Uninstaller utility — Reboot Later button
44
Chapter 2 Install Windows software and utilities
ENWW
Use the software CD to remove the product software
The installer program on the software CD includes a utility to remove the product software
1.
Insert the printing system software CD into the CD-ROM drive. The software installer detects the
language of the operating system, and then displays the main menu of the installation program in
the same language.
If the installer program has not started after 30 seconds, complete these steps:
a.
On the Start menu, click the Run option.
b.
Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive).
c.
Click the OK button. The installer program starts and opens the Welcome Back screen.
Figure 2-18 Software installation — Welcome Back screen
ENWW
Uninstall software
45
2.
Click the Uninstall option, and then click the Next button.
Figure 2-19 Software installation — Uninstall option selected
3.
Click the Uninstall button, and then follow the onscreen instructions to complete the process.
Figure 2-20 Software uninstall — Uninstall button
46
Chapter 2 Install Windows software and utilities
ENWW
4.
Click the Uninstall button to begin the removal process. When the process is complete, either
click the Reboot Now button, or clear the check box and click the Reboot Later button.
Figure 2-21 Software uninstall — Reboot Now button
Figure 2-22 Software uninstall — Reboot Later button
ENWW
Uninstall software
47
Remove the print driver by using the Windows Add or Remove
Programs feature
If the print driver was installed by the HP Driver Installation Utility (HP DIU), perform the following to
uninstall the driver:
NOTE: You do not need the printing-system software CD to use this uninstall method.
NOTE: To uninstall the software, you must log on with Administrator privileges.
1.
Close all programs.
2.
Complete one of the following steps.
●
Windows XP and Windows Server 2003: On the Start menu, click the Control
Panel item, and then double-click the Add/Remove programs item.
●
Windows Vista and Windows 7: On the Start menu, click the Control Panel item,
and then under the Programs menu click the Uninstall a program item.
Figure 2-23 Windows Control Panel screen
3.
Click Change or Remove Programs, select the component you want to remove, and then
click Change/Remove. The following components might appear in the list of programs:
●
48
Enterprise HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer PCL 6 driver
Chapter 2 Install Windows software and utilities
ENWW
4.
The HP Driver Uninstall Utility launches. Click the Uninstall button to start the uninstall process.
Click Cancel to exit the HP Uninstall Utility.
Figure 2-24 HP Driver Uninstall Utility screen
5.
When the removal is complete, you will be prompted to reboot the computer. De-select the
checkbox to reboot at a later time.
Figure 2-25 HP Driver Uninstall Complete screen
ENWW
Uninstall software
49
Uninstall the print driver by using the Server Properties feature
If the print driver was installed by the Add Printer Wizard, perform the following to uninstall the driver:
NOTE: To uninstall the software, you must log on with Administrator privileges.
1.
Close all programs.
2.
On the Start menu, do one of the following steps:
3.
●
Windows XP and Windows Server 2003: Click the Settings item, and then open the
Printers and Faxes item.
●
Windows Server 2008: Click the Control Panel item, and then open the Printers
folder.
●
Windows Vista: Click the Control Panel item. Under the Hardware and Sound
category, click the Printer item.
●
Windows 7: Click the Devices and Printers item.
Right-click the icon for your product and then click the Delete button. This removes the icon for the
product only, but it does not remove the associated files.
NOTE: You cannot have any print jobs in the print queue for the print driver being deleted.
Double-click the print queue icon to verify the there are no jobs in the print queue.
4.
5.
To remove the associated files, do one of the following steps:
●
Windows XP and Windows Server: Click the File menu from inside the Printers or
Printers and Faxes dialog, and then click the Server Properties menu item.
●
Windows Vista: Right-click the list pane, and then click the Server Properties menu
item.
●
Windows 7: Click another item in the Printers and Faxes group, and then at the top of
the list click the Printer server properties button.
Click the Drivers tab, click the name of the product, and then click the Remove button. When
you are prompted to confirm the deletion, click the Yes button.
NOTE: This will fail if there are any queues on the printer using this driver.
6.
50
Click the OK button to close the Print Server Properties dialog, and then close the Printers
or Printers and Faxes dialog.
Chapter 2 Install Windows software and utilities
ENWW
3
HP PCL 6 print driver for Windows
Introduction
This chapter describes the features of the HP LaserJet Enterprise 600 M601, M602, and M603 Series
Printer PCL 6 Print Driver for, Windows XP (32-bit), Windows Server 2003 (32-bit), Windows Server
2008 (32-bit and 64-bit), Windows Vista (32-bit and 64-bit), and Windows 7 (32-bit and 64-bit).
You can control print jobs from several places:
●
the product control panel
●
the software program print dialog box
●
the driver user interface
Generally, for features that are duplicated in more than one location (for instance, you can select the
paper input tray from any of them), settings that are established in the software program take
precedence over print-driver settings. Print-driver settings, in turn, override product control-panel
settings.
When you install the printing-system software in Windows, the HP PCL 6 Print Driver is installed by
default through the installer. The HP PS Universal Print Driver and the HP PCL 5 Universal Print Driver
and the HP PCL 6 Universal Print Driver can be installed by downloading the software from the Web.
Topics:
ENWW
●
Change the print driver settings for Windows
●
Help system
●
Advanced tab features
●
Printing Shortcuts tab features
●
Paper/Quality tab features
●
Effects tab features
●
Finishing tab features
●
Job Storage tab features
●
Services tab features
●
Device Settings tab features
Introduction
51
●
About tab features
Change the print driver settings for Windows
Operating
System
To change the settings for
all print jobs until the
software program is
closed
To change the default
settings for all print jobs
To change the device
configuration settings
Windows 7, XP,
Server 2003, Server
2008, and Vista
1.
On the File menu in the
software program, click
Print.
1.
1.
2.
Select the driver, and then
click Properties or
Preferences.
The steps can vary; this
procedure is most common.
Click Start, click
Settings, and then click
Devices and Printers
(Windows 7) or Printers
and Faxes (Windows XP
Professional and Server
2003) or Printers and
Other Hardware
Devices (Windows XP
Home).
For Windows Vista, click
Start, click Control
Panel, and then click
Printer.
For Windows Vista, click
Start, click Control
Panel, and then click
Printer.
2.
Right-click the driver icon,
and then select Printing
preferences.
Click Start, click
Settings, and then click
Devices and Printers
(Windows 7) or Printers
and Faxes (Windows XP
Professional and Server
2003) or Printers and
Other Hardware
Devices (Windows XP
Home).
2.
Right-click the driver icon,
and then select
Properties or Printer
Properties
3.
Click the Configure tab or
the Device Settings tab.
To gain access to driver settings from within most software programs, click File, click Print, and then
click Properties or Preferences. The appearance and names of the driver tabs that appear can
vary, depending on the operating system. These settings apply only while the software program is
open.
You can also control the driver directly from the Printers folder. These settings change the default
settings for all software programs.
52
●
In Windows 7, click Start, select Devices and Printers, right-click the device name, and then
click Printing preferences to gain access to the same set of driver tabs that the software
program controls.
●
In Windows XP, click Start, select Settings, select Printers and Faxes (Windows XP
Professional) or Printers and Other Hardware Devices (Windows XP Home), right-click the
device name, and then click Printing preferences to gain access to the same set of driver tabs
that the software program controls.
●
In Windows Vista, click Start, select Settings, select Printers, right-click the device name, and
then click Printing preferences to gain access to the same set of driver tabs that the software
program controls.
Chapter 3 HP PCL 6 print driver for Windows
ENWW
In Windows Vista, Server 2003 and XP click Properties, in Windows 7 and Server 2008 click
Printer Properties, after right-clicking the device name to gain access to the Properties tab set,
which controls the driver behavior and driver connections.
Properties tab set
The Properties tab set contains information about and options for configuring the product.
NOTE: Windows also has tabs in the Properties or Printer properties tab set. For information
about those tabs, see the documentation that came with the computer.
Printing preferences tab set
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product Printing
preferences tabs contain options for formatting documents for the product. Gain access to the
Printing preferences tabs either through the software program or through the Windows Printers
and Faxes folder.
The following tabs are included in Printing preferences tab set:
●
Advanced
●
Printing Shortcuts
●
Paper/Quality
●
Effects
●
Finishing
●
Job Storage
●
Services
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up. The
document preview image appears in the upper-right corner of all Printing preferences tabs except
the Services and Job Storage tabs.
Switching between tabs does not change the location or appearance of the document preview image.
Move the mouse over the document preview image, and the mouse cursor changes from an arrow to a
gloved hand. Toggle between portrait and landscape page orientation by clicking on the image.
ENWW
Change the print driver settings for Windows
53
Help system
The HP PCL 6 Print Driver includes a full-featured Help system to provide assistance with printing and
configuration options.
HP Printer Help
Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, and Windows 7
support HP Printer Help . You can gain access to HP Printer Help messages in any of the following
ways:
●
Right-click a feature or control. A pop-up Help window appears.
●
Click a feature or control, and then press the F1 key. The Help window for the currently selected
control appears.
Incompatible Print Settings messages
Incompatible Print Settings (constraint) messages are unsolicited messages that appear in
response to specific print-driver selections. These messages alert you to selections that are illogical or
impossible given the product capabilities or the current settings of other controls.
NOTE: Constraint messages are limited, and the underlying software architecture might accept some
settings that are illogical or impossible for the product to perform. Sending a job with incompatible
settings can lead to unexpected results. If print jobs do not print as expected, check the product
documentation for the product capabilities.
In supported Windows operating environments, some technically invalid print-driver configurations
result in warning messages. Duplexing, for example, is not possible when the Transparency paper type
is selected. The following figure shows an Incompatible Print Settings message.
Figure 3-1 An Incompatible Print Settings message
To resolve the conflicting settings, click Restore my previous settings., and then click OK. The
driver resets the conflicting control back to its previous state.
If you want to keep the conflicting setting, click Keep this setting, and I will change it later.,
and then click OK.
NOTE: In this example, the conflict can be resolved manually. If the conflict is not resolved when the
driver is closed, then the same dialog appears again when a print job is sent to the product.
54
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Advanced tab features
NOTE: The Advanced tab is located on the Printing preferences tab set.
Use the Advanced tab to change the layout of printed pages. Use this tab to configure special
controls that are not commonly used, as well as to control features such as collating and copies in the
driver (although most current software programs support these features in the print dialog box or
through the page settings in the software program). The following figure shows the Advanced tab.
Figure 3-2 The default appearance of the Advanced tab
The Advanced tab contains the following controls:
●
Paper/Output
●
Graphic
●
Document Options
Paper/Output
The Paper/Output setting contains the Copy Count setting.
ENWW
Advanced tab features
55
Copy Count
Copy Count specifies the number of copies to print. This driver setting is useful for software programs
that do not provide a copy count. If a copy count is available in the software program, set the copy
count in the software program.
The number of copies that you request appears in the Copy Count option. You can select the number
by typing in the text box or by using the up and down arrows to the right of the text box. Valid entries
are numbers from 1 to 9999. The copies value will not advance from the maximum number (9999) to 1
when the up arrow is used, or change from 1 to the maximum number (9999) when the down arrow is
used. When you click another group box or leave the Advanced tab, invalid entries into the text box
(such as non-numerical input, numbers less than 1, or numbers greater than the maximum allowed) are
changed to the last valid value that appeared in the text box. The default number of copies is 1.
Because you can set the number of copies that you want from some software programs, conflicts
between the software program you are using and the driver can arise. In most cases, the software
program and the driver communicate, so that the number of copies set in one location (such as the
program) will appear in the other (such as the driver). For some programs, this communication does not
take place, and the copies values are treated independently. For these programs, setting 10 copies in
the program and then setting 10 copies in the driver will result in 100 copies (10 x 10) being printed.
It is recommended that you set the number of copies in the program, whenever possible.
When the Copy Count option is set to more than 1, the Collated check box becomes available.
Select this check box when you want the product to collate (collect and combine in proper order) the
printed copies. Most current software programs support the collating feature in the print dialog box or
through the page settings in the software program.
Graphic
The Graphic setting contains the following control:
●
True Type Font settings
True Type Font
Use Substitute with Device Font (the default setting) to print documents that contain TrueType fonts
by using equivalent printer based fonts. This permits faster printing; however, you might lose special
characters that the equivalent printer based font does not support. Select Download as Softfont to
download TrueType fonts for printing instead of using printer based fonts.
Document Options
The Document Options setting contains the following controls:
56
●
Advanced Printing Features
●
Print Optimizations
●
Printer Features
●
Layout Options
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Advanced Printing Features
When the Advanced Printing Features setting is Enabled, metafile spooling is turned on and
Finishing tab options such as Page Order, Booklet Layout, and Pages per Sheet are
available, depending on your product.
Enhanced metafile spooling is used to greatly reduce the amount of time that elapses between a request
to print (initiated by an application) and the return of control to the application by the operating system.
For normal printing, leave the Advanced Printing Features setting at the default (Enabled). If
compatibility problems occur, you can disable the feature. However, some advanced printing features
might still appear in the print driver, even though they have been disabled. If you select an advanced
printing feature in the print driver that has been disabled on the Advanced tab, the feature is
automatically re-enabled.
Print Optimizations
The default setting for Print Optimizations is Enabled. When this feature is enabled and your
document contains overlapping text and graphics, the text that is placed on top of a graphic might not
print correctly. If the printed output is not correct, you can disable this feature. When this feature is
disabled, print optimization-features, such as substituting device fonts for TrueType fonts and scanning
for horizontal and vertical rules, are turned off.
Printer Features
The Printer Features setting contains the following controls:
●
Print All Text as Black
The feature is Disabled by default. When Enabled is selected, the driver prints all text as black
regardless of the original document text color. Color text is printed as black, except for white text,
which remains white. (White text is a reliable method of printing reverse typeface against a dark
background.) This setting does not affect graphic images on the page, nor does it affect any text
that is part of a graphic.
●
Send True Type as Bitmap
Send True Type as Bitmap provides an alternative for software programs that have trouble
using TrueType fonts for special graphic aspects such as shading, rotation, or slanting. The setting
is Disabled (off) by default. The TrueType fonts are converted to bitmap soft fonts before
downloading. The Enabled setting causes the driver to send TrueType fonts to the product as
outlines, which retains the standard format (outline) of the fonts.
●
Alternative Letterhead Mode
When selected, this option eliminates the need to flip or reload letterhead or preprinted paper in a
tray, whether you are printing on one or both sides of the sheet. Load the paper as you would for
printing on both sides. If the product tray has an icon that indicates whether to load paper either
face-up or face-down, load the paper in opposite orientation of that shown.
ENWW
Advanced tab features
57
When this option is selected, you must use one of the following options in the Paper type
setting:
◦
Letterhead
◦
Preprinted
NOTE: Because Alternative Letterhead Mode is available only if the product is equipped
with an automatic duplexing unit, the the base model (HP Laserjet Enterprise 601n) does not
support this option.
Layout Options
The Layout Options setting contains the Page Order setting.
Page Order specifies the order in which the pages of your document are printed. Front to Back
prints the document so that page 1 prints first. Back to Front prints the document so that page 1
prints last.
NOTE: The page-ordering operation works on whole sheets of paper rather than on individual logical
pages. Accordingly, if you set Pages per Sheet (on the Finishing tab) to be greater than one, the
ordering of logical pages on a physical sheet of paper does not change.
58
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Printing Shortcuts tab features
●
Use defined printing shortcuts
●
Create a custom printing shortcut
NOTE: The Printing Shortcuts tab is located on the Printing preferences tab set.
Use the Printing Shortcuts tab to store specific combinations of driver settings for easy use.
The following figure shows the Printing Shortcuts tab.
NOTE: The number of options shown (Paper sizes, Paper source, etc) changes depending on the
selected shortcut.
Figure 3-3 Printing Shortcuts tab
The Printing Shortcuts tab is a new tab that appears on the HP PCL 6 Print Driver beginning with the
HP Color LaserJet CM4730 MFP. In previous drivers, the Print Task Quick Sets appeared in most of the
driver tabs, and was used to capture commonly used driver settings. Like Quick Sets, the Printing
Shortcuts tab saves commonly used driver settings under a shortcut name.
●
ENWW
Use defined printing shortcuts
Printing Shortcuts tab features
59
●
Create a custom printing shortcut
Use defined printing shortcuts
The following defined printing shortcuts are available:
●
Factory Defaults
●
General Everyday Printing. Select this option to print using typical settings.
●
Envelopes. Select this option to print using typical settings for booklet printing.
●
Cardstock/Heavy.
●
Labels
●
Transparencies
●
EcoSMART Settings. Select this option to print using typical settings for duplex printing.
●
Booklet Printing
NOTE: If you change any of the settings for a defined printing shortcut, the Save As... and Reset
buttons become active. Click Save As... to save the new settings as a custom printing shortcut. Click
Reset to set the default options for all features of the selected shortcut.
Create a custom printing shortcut
1.
Select General Everyday Printing as a base.
2.
Select the appropriate print settings on the Printing Shortcuts tab or use the settings on any of
the Printing preferences tabs.
3.
On the Printing Shortcuts tab, click Save As.... The Printing Shortcuts dialog box
appears.
Figure 3-4 Printing Shortcuts dialog box
4.
Type a name for the custom printing shortcut, and then click OK. The custom printing shortcut
appears in the Printing Shortcuts list.
5.
To delete a custom printing shortcut, click the custom shortcut, then click the Delete button.
NOTE: Predefined shortcuts are designed for using as-is, or as bases for custom printing
shortcuts, and cannot be deleted.
60
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Paper/Quality tab features
NOTE: The Paper/Quality tab is located on the Printing preferences tab set.
Use the Paper/Quality tab to specify paper size, type, and source. You can also use this tab to
specify different paper selections for the front cover, first page, other pages, last page, and back cover
of the document. The following figure shows the Paper/Quality tab.
Figure 3-5 Paper/Quality tab
The Paper/Quality tab contains the following control sets:
ENWW
●
Paper Options
●
Document preview image
●
Print Quality
Paper/Quality tab features
61
Paper Options
The settings specified in the Paper Options group box on the Paper/Quality tab apply to all of the
pages of the document. The following figure shows the Paper Options group box and the selections
that are available by default.
Figure 3-6 Paper Options group box
The settings in the Paper Options group box are described in the following order:
●
Paper sizes
●
Custom Paper Size
●
Paper source
●
Paper type
●
Special pages
Paper sizes
The Paper sizes setting is a drop-down menu that lists all of the supported paper sizes.
When you move the mouse over the dimensions label, the mouse cursor changes from an arrow to a
gloved hand. Click the dimensions label to toggle between English and metric units.
Because paper-size settings in most software programs override driver settings, it is generally best to
use the driver to set paper size only when you are printing from software programs that do not include
a paper-size setting, such as NotePad, or when you are producing a book or a booklet that does not
require different paper sizes.
NOTE: Certain software programs can override the size command and specify different paper sizes
within a single document.
When you change the print-driver setting to a paper size that is not currently loaded in the product, a
control-panel message appears that prompts you to load the paper size or select another tray.
62
Chapter 3 HP PCL 6 print driver for Windows
ENWW
When the Settings under the Special Pages section have been changed, the Paper sizes, Paper
source, and Paper type menus change also, offering a variety of options. For more information, see
Special pages on page 68.
Custom Paper Size
The Custom Paper Size dialog box appears when you click Custom… on the Paper/Quality
tab. The following figure shows the initial appearance of the Custom Paper Size dialog box.
Figure 3-7 Custom Paper Size dialog box
NOTE: The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product supports
custom paper sizes from 3 inches in length and 5 inches in width up to 14 inches in length and 8.5
inches in width. The driver will be updated to enable printing to the maximum size.
Name
Use the Name text box to type a new name for a custom paper size. When you change the name to
something other than Custom, the Save and OK buttons become active.
The name that appears in the Name text box depends on the following conditions:
●
If a saved custom paper size has been selected from the drop-down menu on the Paper/Quality
tab, then the Name text box shows the name of the selected custom paper size.
●
If a standard paper size has been selected on the Paper/Quality tab, then the Name text box
shows the default name of Custom.
●
If a new name has been typed into the Name text box for the purpose of saving a new size or
renaming an existing size, then that new name will remain in the text box until the new size is
saved or the dialog box is closed.
If you type a new name into the Name text box, but then do not click Save, you can change the
width and height values without losing the name. However, if you close the dialog box without clicking
Save, any unsaved name or size values are lost without warning.
ENWW
Paper/Quality tab features
63
Paper size
The width and height values can be changed by typing numeric strings into the edit boxes in the
Paper Size group box.
Any entry that is greater than the maximum limits of the width and height control is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height
control is rounded up to the minimum valid entry.
If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest
whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole
millimeter. Any non-numerical entry reverts to the minimum value. Width and height entries are
validated when the focus has changed.
The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current
measurement units.
Supported paper sizes
This product supports a number of paper sizes, and it adapts to various media.
NOTE: To obtain best results, select the correct paper size and type in the print driver before printing.
Table 3-1 Supported paper and print media sizes
Size and dimensions
Tray 1
Tray 2
and the
optional
500sheet
trays
Optional
1,500-sheet
tray
Optional
envelope
feeder
Optional
duplexer
Optional
stacker and
stapler/
stacker
Optional
5-bin
mailbox
Letter
216 x 279 mm (8.5 x 11
in)
A4
210 x 297 mm (8.27 x
11.69 in)
Legal
216 x 356 mm (8.5 x 14
in)
Executive
184 x 267 mm (7.24 x
10.51 in)
(Stacker only)
A5
148 x 210 mm (5.83 x
8.27 in)
64
Chapter 3 HP PCL 6 print driver for Windows
(Stacker only)
ENWW
Table 3-1 Supported paper and print media sizes (continued)
Size and dimensions
Tray 1
Tray 2
and the
optional
500sheet
trays
Optional
1,500-sheet
tray
Optional
envelope
feeder
Optional
duplexer
Optional
stacker and
stapler/
stacker
Optional
5-bin
mailbox
8.5 x 13
216 x 330 mm (8.5 x 13
in)
(Stacker only)
B5 (JIS)
182 x 257 mm (7.17 x
10.12 in)
(Stacker only)
Double Postcard (JIS)
148 x 200 mm (5.8 x
7.9 in)
16K
197 x 273 mm (7.8 x
10.8 in)
(Stacker only)
Custom
76 x 127 mm to 216 x
356 mm
(3.0 x 5.0 in to
8.5 x 14 in)
Custom
148 x 210 mm to 216 x
356 mm
(Stacker only)
(5.83 x 8.27 in to
8.5 x 14 in)
Envelope Commercial
#10
105 x 241 mm (4.13 x
9.49 in)
Envelope DL ISO
110 x 220 mm (4.33 x
8.66 in)
Envelope C5 ISO
162 x 229 mm (6.37 x
9.01 in)
ENWW
Paper/Quality tab features
65
Table 3-1 Supported paper and print media sizes (continued)
Size and dimensions
Tray 1
Tray 2
and the
optional
500sheet
trays
Optional
1,500-sheet
tray
Optional
envelope
feeder
Optional
duplexer
Optional
stacker and
stapler/
stacker
Optional
5-bin
mailbox
Envelope B5 ISO
176 x 250 mm (6.92 x
9.84 in)
Envelope Monarch
#7-3/4
98 x 191 mm (3.9 x 7.5
in)
1
Custom sizes cannot be stapled, but they can be stacked in the output bins.
Units
To change measurement units, click one of the options in the Units group box (either Inches or
Millimeters).
Custom width and height control limits
The minimum paper size for the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer
product is 76 x 127 mm (3 x 5 in) and the maximum in Tray 1 is 216 x 279 mm (8.5 x 14 in). The
following table summarizes paper size limits for each paper-handling device.
NOTE: Custom media width is limited to 312 mm (12.3 in). However, SRA3, which is 320 mm (12.6
in) wide, is supported. The maximum printable image is 302 mm (11.9 in) wide. With the required
blank 5 mm (0.2 in) margins on each side for printing, any media wider than 312 mm (11.9 in) will
have its image centered and limited to 302 mm wide.
Table 3-2 PCL 6 custom paper sizes
Tray
Dimensions
Minimum
Maximum
Tray 1 (100-sheet
multipurpose)
Width
76 mm (3 in)
216 mm (8.5 in)
Length
127 mm (5 in)
279 mm (14 in)
Tray 2 (500-sheet)
Width
148.0 mm (5.83 in)
210 mm (8.27 in)
Length
216 mm (8.5 in)
279 mm (14.0 in)
Width
148.0 mm (5.8 in)
210 mm (8.27 in)
Length
216 mm (8.5 in)
279 mm (14.0 in)
Trays 3 — 6 (500-sheet)
66
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Paper source
The Paper source setting specifies the source tray to use for printing a document. The list of source
trays depends on the product accessories that are installed. Any optional source trays that are installed
through the Device Settings tab also appear here.
The Paper source drop-down menu can contain the following options, depending on what has been
installed on the product:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP LaserJet Enterprise
600 M601, M602, and M603 Series Printer uses the source tray that supports the paper size that you
have selected. If you select a source tray other than Automatically select, make sure that the correct
paper size is loaded in the source tray.
Paper type
The Paper type drop-down menu shows the first few paper types that the HP LaserJet Enterprise 600
M601, M602, and M603 Series Printer supports and an entry for More. Clicking More opens the
Type Is dialog box. Click the + next to Type Is and its subcategories to view all of the paper types
that the product supports, listed in the following categories.
●
Unspecified
●
Everyday <96g
●
◦
Plain
◦
HP EcoSMART Lite
◦
Light 60-74g
◦
Bond
◦
Recycled
Photo/Cover 176–220g
◦
●
ENWW
Cardstock 176–220g
Other
◦
Monochrome Laser Transparency
◦
Labels
◦
Letterhead
Paper/Quality tab features
67
◦
Envelope
◦
Preprinted
◦
Prepunched
◦
Colored
◦
Rough
◦
Retail Shelf Edge Labels
The default setting is Unspecified.
No mechanism exists for manually adding custom paper types through the driver. Use HP Web
Jetadmin to add custom paper types. Custom types can be added only by using bidirectional
communication, so they must already exist in the product when the bidirectional query occurs. If
bidirectional communication is enabled, then an updated list of paper types is returned. If bidirectional
communication is not enabled, then the driver looks for custom paper types that have been saved from
a previous bidirectional communication query, and uses those. Otherwise, no custom paper types are
available through the driver.
NOTE: To download a current version of HP Web Jetamin and for the latest list of supported host
systems, go to the following Web site:
www.hp.com/go/webjetadmin
If you select a setting other than the default, make sure that the correct paper type is loaded in the tray
that you selected in the Paper source setting.
When you change the print-driver setting to a paper type that is not currently loaded in the product, a
control-panel message appears that prompts you to load the paper type or select another tray.
Special pages
To specify special pages to be used, click the Settings button under Special Pages.
68
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Covers
To use specific cover settings, click Covers in the Special Pages group box.
Figure 3-8 Special Pages dialog— Covers
Use the Covers options to include a blank or preprinted cover on a document, or to include a front/
back cover from a source tray that is different from the one used for the remainder of the document.
The following are the Covers options:
●
Add a blank or preprinted cover: Select which cover is customized: Front, Back, or Both.
●
Paper source: The Paper source setting specifies the source tray to use for adding a front
and/or back cover to the document. The list of source trays depends on the accessories that are
installed. Any optional trays that are installed through the Device Settings tab also appear here.
●
Paper type: The Paper type setting specifies the paper size to use for front and/or back
covers. Changes made to the Paper type setting here override any previous Paper type
settings using the same paper source.
NOTE: The same size of paper will be used for the entire print job.
When you change the type and source of the paper and covers, the settings remain configured until
you close the software program.
Special Pages dialog — Print pages on different paper
Use the Print pages on different paper options to select an alternative paper type or source for
the first or last pages of a document.
ENWW
Paper/Quality tab features
69
The following figure shows the Print pages on different paper settings and options.
Figure 3-9 Print pages on different paper
The following are the Print pages on different paper options:
●
Pages in document. Select which pages are customized: the First page or the Last page.
●
Paper source: The Paper source setting specifies the source tray to use for printing a
document. The list of source trays depends on the accessories that are installed. Any optional trays
that are installed through the Device Settings tab also appear here.
●
Paper type: The Paper type drop-down menu shows all of the paper types that the HP LaserJet
Enterprise 600 M601, M602, and M603 Series Printer supports.
NOTE: The same type of paper is used for the entire print job.
When you change the type and source of the paper and covers, the settings remain configured until
you close the software program.
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up. The
document preview image appears in the upper-right corner of the following Printing preferences
driver tabs:
70
●
Printing Shortcuts
●
Paper/Quality
Chapter 3 HP PCL 6 print driver for Windows
ENWW
●
Effects
●
Finishing
Switching between tabs does not change the location or appearance of the document preview image.
When you move the mouse over the document preview image, the mouse cursor changes from an
arrow to a gloved hand. You can toggle between portrait and landscape page orientation by clicking
the image.
Print Quality
The Print Quality group box contains the following controls:
●
Print Quality drop-down menu
●
EconoMode check box
Print Quality drop-down menu
The Print Quality drop-down menu contains the following options:
●
600 dpi: This setting prints using standard 600 dpi resolution.
●
FastRes 1200: This setting produces a resolution of 1200 x 600 dots per inch (dpi) This mode is
faster than 1200 x 1200 resolution, but has slightly lower print quality.
●
ProRes1200 (180 lpi): This setting prints using 1200 x 1200 resolution. It prints more slowly
than the other resolutions, but it has the best print quality.
●
ProRes1200 (132 lpi): This setting prints using 1200 x 1200 resolution. It prints more slowly
than the other resolutions, but it has the best print quality.
●
1200 x 1200. This setting may improve the rendering of fine lines and text.
EconoMode check box
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use less
toner and decrease the cost per page. However, using EconoMode also can reduce print quality.
HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply
might outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these
circumstances, you will need to install a new print cartridge, even if there is toner supply remaining in
the cartridge.
ENWW
Paper/Quality tab features
71
Effects tab features
NOTE: The Effects tab is located on the Printing preferences tab set.
Use the Effects tab to create unique paper effects such as scaling and watermarks. The following
figure shows the Effects tab.
Figure 3-10 Effects tab
The Effects tab contains the following controls:
72
●
Resizing Options
●
Document preview image
●
Watermarks
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Resizing Options
The Resizing Options group box consists of the following controls:
●
Actual Size (default)
●
Print Document On
●
Scale to Fit
●
% of Actual Size
Actual Size
Actual Size is the default setting. It prints the document without changing the document size.
Print Document On
Click the Print Document On option to format the document for one paper size and then print the
document on a different paper size, with or without scaling the image to fit the new paper size.
The Print Document On control is disabled by either of the following conditions:
●
The % of Actual Size value is not 100.
●
The Pages per Sheet value (on the Finishing tab) is not 1.
When Print Document On is selected, the drop-down menu shows the paper sizes on which you
can print. The list contains all of the standard paper sizes that the selected paper source supports and
any custom sizes that you have created. When Print Document On is selected, Scale to Fit is
automatically selected. Clear this check box if you do not want your document reduced or enlarged to
fit on the selected paper.
Scale to Fit
The Scale to Fit option box specifies whether each formatted document page image is scaled to fit the
target paper size. By default, Scale to Fit is selected when Print Document On is selected. If the
setting is turned off, then the document page images will not be scaled, and are instead centered at full
size on the target paper. If the document size is larger than the target paper size, then the document
image is clipped. If it is smaller, then it is centered within the target paper. The following figure shows
ENWW
Effects tab features
73
preview images for a document formatted for Legal-size paper with the Print Document On check
box selected, and the target size specified as Letter.
Figure 3-11 Preview images – Legal on Letter; Scale to Fit off (left) and on (right)
When the size for which the document is formatted (that is, the logical size) differs from the target size,
the preview image uses a dashed gray line to show the boundaries of the logical page in relation to
the target paper size.
% of Actual Size
The % of Actual Size option provides a slider bar and input box to use for scaling the percentage
setting. The default setting in the entry box is 100% of actual size. Actual size is defined as the paper
size that is selected within the driver or what the driver receives from the software program (if the
software program does not negotiate the paper size with the driver). The driver scales the page by the
appropriate factor and sends it to the product.
The limits of the range are from 25% to 400%, and any values outside the range are adjusted to those
limits as soon as the focus is removed from the control (that is, when the Tab key is pressed or another
control is selected).
Any change to the scale also changes the page preview, which increases or decreases from the upperleft corner of the preview.
The slider bar controls the scale directly. The value in the edit box changes as the slider-bar indicator is
dragged, and the document preview image is updated to the new image scale. Each click on the
arrows increases or decreases the scale by 1%. Each click on the slider bar affects the scale by 10%.
You cannot achieve an exact value by dragging the slider-bar indicator. Instead, either use the sliderbar indicator to approximate the value that you want and then use the arrows to refine the value, or
type the value into the entry box.
The following settings disable % of Actual Size:
●
Print Document On (on the Effects tab) is selected
●
Pages per Sheet (on the Finishing tab) is not 1
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up. The
74
Chapter 3 HP PCL 6 print driver for Windows
ENWW
document preview image appears in the upper-right corner of the following Printing preferences driver
tabs:
●
Printing Shortcuts
●
Paper/Quality
●
Effects
●
Finishing
Switching between tabs does not change the location or appearance of the document preview image.
When you move the mouse over the document preview image, the mouse cursor changes from an
arrow to a gloved hand. You can toggle between portrait and landscape page orientation by clicking
the image.
Watermarks
Use the Watermarks feature to select a watermark, create a new watermark (text only), or edit an
existing watermark. The following watermarks are preset in the driver:
●
(none)
●
[Username]
●
Confidential
●
Draft
●
SAMPLE
The Watermarks feature can be configured using the Driver Configuration Utility.
If the [Username] watermark is selected, the driver will use the network username of the logged in
user for the watermark.
The drop-down menu shows alphabetically sorted watermarks that are currently available on the
system, plus the string "(none)," which indicates that no watermark is selected. This is the default
setting. Any watermark that is selected from this list appears in the preview image.
When the First Page Only check box is selected, the watermark is printed only on the first page of
the document. The First Page Only check box is disabled when the current watermark selection is
"(none).”
Watermarks are applied to logical pages. For example, when Pages per Sheet is set to "4" and
First Page Only is turned off, four watermarks appear on the physical page (one on each logical
page).
ENWW
Effects tab features
75
Click Edit, and the Watermark Details dialog box appears.
Figure 3-12 Watermark Details dialog box
The dialog box shows a preview image and provides options for creating a new watermark and
controlling the message angle and font attributes.
Click OK to accept all of the changes that are made in the Watermark Details dialog box.
However, clicking Cancel does not cancel all of the changes. If you make changes to a watermark
and then select a different watermark or click New, all of the changes are saved, and only the current,
unsaved changes can be canceled.
Current watermarks
The Current Watermarks group box contains a list of available watermarks, both predefined
watermarks that are available in the driver and any new watermarks that you have created.
To create a new watermark, click New. The new watermark appears in the Current Watermarks
list and in the Watermark Message edit box as "Untitled" until you name it. The name that you
type in the Watermark Message field appears in the Current Watermarks group box in the
Watermark Details dialog box and in the Watermarks group box on the Effects tab.
To name the new watermark, type the selected watermark text in the Watermark Message edit
box.
To delete a watermark, select the watermark in the Current Watermarks list, and then click Delete.
A warning appears asking whether you are sure you want to delete the selected item. Click Cancel if
you want to keep the watermark. Click OK to delete the selected watermark.
NOTE: You can have no more that 30 watermarks in the Current Watermarks list at one time.
When you reach the limit of 30 watermarks, the New button is disabled.
To edit an existing watermark, select the watermark in the Current Watermarks list. If you change
the Watermark Message for that watermark, you are, in effect, creating a new watermark.
76
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Watermark Message
The Watermark Message is also the name that identifies the watermark in the Current
Watermarks list, except when more than one watermark has the same message. For example, you
might want several different watermarks with the message DRAFT, each with a different typeface or font
size. When this occurs, the string is appended with a space, a pound sign, and a number (for
example, Draft #2). When a number is added, the number two is used first, but if the resulting name
is also in the list, then the number increases until the name is unique (Draft #3, Draft #4, and so on).
Message Angle
Use the controls in the Message Angle group box to print the watermark in different orientations on
the page. All settings center the watermark string within the page; the selection of a particular setting
affects only the angle of the string placement. The following settings are available:
●
Diagonal. This is the default setting. Select this setting to place the text along a line that spans
the lower-left to upper-right corners of the page.
●
Horizontal. Select this setting to place the text along a line that spans the mid-left and mid-right
edges of the page.
●
Custom. Select this setting to place the text at the specified angle across the page. Use the
numeric spin box to select the angle.
Font Attributes
Use the controls in the Font Attributes group box to change the font and the shading, size, and style
of the font.
The Font Attributes group box contains the following controls:
●
Name
The Name drop-down menu lists fonts that are currently installed on the system. The default is
language-dependent.
●
Color
The Color drop-down menu contains the following selection:
◦
●
Gray
Shading
The default Shading setting for new and preset watermarks is Very Light. The following range
of shades is available from the Shading drop-down menu:
ENWW
◦
Lightest
◦
Very Light (default)
◦
Light
◦
Medium Light
Effects tab features
77
◦
Medium
◦
Medium Dark
◦
Dark
◦
Very Dark
◦
Darkest
These values represent the intensity of the gray that is used. Select Light to produce a lightly
saturated gray watermark. Select Lightest to produce the lightest shade of watermark. Select
Darkest to produce a black watermark.
●
Size
Font sizes from 1 to 999 points are available from the Size menu. The default point size is
language-dependent.
●
Style
The following settings are available:
◦
Regular
◦
Bold
◦
Italic
◦
Bold Italic
The default Style setting for new and preset watermarks is Regular.
Default watermark settings
The following table shows Font Attribute settings for new and preset watermarks.
Table 3-3 Font Attribute settings for new and preset watermarks
Setting
New watermark
Preset watermark
Name
Arial
Varies by language
Color
Gray
Gray
Shading
Very Light
Very Light
Size
80
Varies by language
Style
Regular
Regular
Click OK to accept all of the changes that have been made in the Watermark Details dialog box.
Clicking Cancel does not cancel all of the changes. If you make changes to a watermark and then
select a different watermark or click New, all of the changes are saved, and only the current, unsaved
changes can be canceled.
78
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Finishing tab features
NOTE: The Finishing tab is located on the Printing preferences tab set.
Use the Finishing tab to print booklets and control the paper output. The following figure shows the
Finishing tab.
Figure 3-13 Finishing tab
The Finishing tab contains the following controls:
●
Document Options
●
Document preview image
●
Orientation
Document Options
The Document Options group box contains the following controls:
●
ENWW
Print on Both Sides
Finishing tab features
79
●
Flip Pages Up
●
Booklet Layout
●
Pages per sheet
●
Print Page Borders
●
Page Order
Print on Both Sides
The default setting for the Print on Both Sides option is off (not selected). Print on Both Sides is
available when the following conditions exist:
●
●
80
Paper type on the Paper tab is set to any paper type except for the following types:
◦
Labels
◦
Monochrome Laser Transparency
◦
Envelopes
Paper sizes is set to any paper size except for the following sizes:
◦
Statement
◦
3x5
◦
4x6
◦
5x7
◦
5x8
◦
A6
◦
B6
◦
10x15cm
◦
Envelope #10
◦
Japanese Postcard
◦
Envelope #9
◦
Envelope Monarch
◦
Envelope B5
◦
Envelope C5
◦
Envelope C6
◦
Envelope DL
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Print on both sides automatically
The duplexing unit in the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product
prints on two sides of a sheet of paper when the Print on Both Sides option is specified in the print
job. The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product comes with a
duplexing unit installed in the following models:
●
M601dn
●
HP LaserJet M602
●
HP LaserJet M603
These product models support smart duplexing. The smart duplexing feature increases printing
performance by preventing one-page print jobs or single-sided pages of a duplexed print job from
going through the duplexing unit even when the duplexing feature has been selected in the driver.
All paper types support the smart duplexing feature, except for paper types that cannot be printed on
both sides (such as labels, transparencies, and envelopes) and the following paper types:
●
Prepunched
●
Preprinted
●
Letterhead
●
Cardstock
When the paper type is set to Unspecified, the smart duplexing feature is disabled.
To achieve the best print quality when printing on the second side of the page, the product needs to
make adjustments to its print modes. When you select a paper type, you are, in effect, instructing the
product to use a group of settings (such as fuser temperature and print speed) to print the paper with
the best possible quality. This group of settings is known as print mode. A different print mode is used
with each paper type. Print-mode adjustments for the second side of a duplexed page are automatic.
Print on both sides manually
Select the Print on Both Sides (Manually) check box to print on the second side of the paper for
the HP LaserJet Enterprise 600 M601dn, M602dn, M603dn, which does not have a duplexing unit
installed. Also, select Print on Both Sides (Manually) on the other HP LaserJet Enterprise 600
M601, M602, and M603 Series Printer product models for paper types that are not available when
using the automatic duplexing unit, such as cardstock and thick paper.
Manually printing on the second side of a page is available when you are using the HP PCL 6 driver. If
a duplexing unit is installed and manual duplexing is enabled in the driver, the product automatically
prints on both sides of paper types that are supported for automatic duplexing (Letter, A4, Legal, and
8.5 x 11 only). For paper types that are not supported for automatic duplexing, a Help message
appears prompting you to configure the driver settings for manual printing on both sides. Manual
printing on both sides does not occur automatically.
ENWW
Finishing tab features
81
Select the paper type that corresponds to the paper that you are using for the print job. The following
paper types have a different print modes when you manually print on the second side:
●
Plain
●
Preprinted
●
Letterhead
●
Prepunched
●
Bond
●
Recycled
●
Rough
NOTE: To make the Print on Both Sides (Manually) check box available in the document
options, select the Allow Manual Duplexing option on the Device Settings tab in the print-driver
Properties tab set. See Installable Options on page 100.
If you want to print on both sides manually while using paper that is supported for automatic duplexing,
you must select and apply the Not Installed setting on the Duplex Unit (for 2-Sided Printing)
option on the Device Settings tab.
Cardstock paper can be manually printed on the second side, but no change occurs to the print mode.
Transparencies and labels should never be manually printed on the second side.
To print a multiple-page document, follow these steps:
1.
Select the Print on Both Sides (Manually) check box.
2.
Click OK. The even-number pages of the document print.
3.
When the control panel shows the MANUALLY FEED message, insert the stack of paper (on
which the even-number pages have been printed) as indicated in the following figure.
Figure 3-14 Print on Both Sides Instructions dialog box
When you have completed the steps that appear in the dialog box, the second half of the print job
prints on the back side of the stack of paper. The driver does not require the program to specifically
support odd- and even-page printing, because the driver coordinates this function.
82
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Flip Pages Up
Use the Flip Pages Up check box to specify the duplex-binding option. By default, the Flip Pages
Up check box is not available. It is available only when Print on Both Sides is selected. The
following table demonstrates the results of selecting this check box, depending on the paper orientation
selected on the Finishing tab.
Table 3-4 Page orientation
Orientation (Finishing tab)
Flip Pages Up selected
Flip Pages Up not selected
Portrait
Short-edge binding
Long-edge binding
Landscape
Long-edge binding
Short-edge binding
When Print on Both Sides is selected, the document preview image changes to show a spiral
binding along either the left edge or the top edge of the page. In addition, a folded-over corner
appears in the lower-right portion of the preview image, indicating that printing occurs on the back
side. An arrow on the folded-over corner points in the direction that the pages would be flipped if they
were bound together.
Short-side binding is for print jobs with pages that read by flipping over like the pages of a calendar.
Long-side binding is for print jobs with pages that read by turning like the pages of a book.
Booklet Layout
The Booklet Layout drop-down menu, visible when Print on Both Sides is selected, offers choices
that are based on the current paper size. The default setting for the Booklet Printing drop-down
menu is Off. The other settings have the following format, where [paper size] depends on the paper
size that is set on the Paper/Quality tab:
●
Left Binding
●
Right Binding
When you select Left Binding or Right Binding, the document preview image changes to show the
location of the binding. If the Pages per Sheet setting is on the default setting of 1, it automatically
changes to 2 pages per sheet. If you change the Pages per Sheet setting manually to 4, 6, 9, or
16 pages per sheet, the booklet setting is disabled. See Pages per sheet on page 84 for more
information.
Book and Booklet Printing
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer supports book and booklet
printing.
A book is a print job consisting of at least two pages. It can have a different paper type for the front
cover, first page, other pages, last page, or back cover. Use the Covers and Print pages on
different paper settings on the Paper/Quality tab to select different paper for the front cover, first
page, other pages, and back cover. For more information, see Paper/Quality tab features on page 61.
ENWW
Finishing tab features
83
A booklet is a print job that places two pages on each side of a sheet that can then be folded into a
booklet that is half the size of the paper. Use the Booklet Layout drop-down menu on the Finishing
tab to control booklet settings.
Pages per sheet
Use the Pages per sheet option to select the number of pages that you want to print on a single
sheet of paper. If you choose to print more than one page per sheet, the pages appear smaller and are
arranged on the sheet in the order that they would otherwise be printed. The Pages per sheet dropdown menu provides six settings:
Figure 3-15 Pages per sheet preview images
●
1 page per sheet (this is the default)
●
2 pages per sheet
●
4 pages per sheet
●
6 pages per sheet
●
9 pages per sheet
●
16 pages per sheet
NOTE: When you select an option other than 2 pages per sheet, booklet printing is unavailable.
Related controls indented beneath Pages per Sheet are Print Page Borders and Page Order,
which become active when Pages per Sheet is greater than 1.
Print Page Borders
Print Page Borders sets a line around each page image on a printed sheet to help visually define
the borders of each logical page.
Page Order
The Page Order drop-down menu contains four selections:
84
●
Right, then Down
●
Down, then Right
●
Left, then Down
●
Down, then Left
Chapter 3 HP PCL 6 print driver for Windows
ENWW
The preview document image changes to reflect alterations in these settings.
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up. The
document preview image appears in the upper-right corner of the following Printing preferences
driver tabs:
●
Printing Shortcuts
●
Paper/Quality
●
Effects
●
Finishing
Switching between tabs does not change the location or appearance of the document preview image.
When you move the mouse over the document preview image, the mouse cursor changes from an
arrow to a gloved hand. You can toggle between portrait and landscape page orientation by clicking
the image.
Orientation
Orientation refers to the layout of the image on the page, and does not affect the way that paper feeds
into the product. You can specify the orientation of the print job. The three available orientations are
portrait, landscape, and rotated. The default orientation is Portrait.
NOTE: Nearly all software programs establish the orientation for the printed page, so the page
orientation in the driver is useful only for the few software programs that do not set an orientation.
The Orientation group box contains the following options:
●
Portrait. The top edge of the document is the shorter edge of the paper.
●
Landscape. The top edge of the document is the longer edge of the paper.
●
Rotate by 180 degrees. This creates a landscape or portrait orientation in which the image is
rotated 180°. This setting is useful for printing prepunched paper.
You can toggle orientation between portrait and landscape by clicking the document preview image. If
you select the Rotate by 180 degrees check box, no change occurs in the document preview
image.
ENWW
Finishing tab features
85
Job Storage tab features
NOTE: The Job Storage tab is located on the Printing preferences tab set or the Properties
tab set.
Use the job-storage feature to store print jobs in the HP LaserJet Enterprise 600 M601, M602, and
M603 Series Printer product memory or hard disk for printing at a later time.
The Job Storage tab appears among the driver tabs only if the job-storage feature is enabled on the
Device Settings tab. To support job-storage features for complex jobs, or if you often print complex
graphics, print postscript (.PS) documents, or use many downloaded fonts, HP recommends that you
install additional memory, install a hard disk, or both. Added memory also gives you more flexibility in
supporting job-storage features. A minimum total memory of 288 MB is required to use the Proof and
Hold and Personal Job job-storage features. A hard disk is required to use the Quick Copy and
Stored Job job-storage features.
After a hard disk is installed, the driver must be configured to reflect the changes in the product. If
bidirectional communication is enabled in your environment, the Update Now feature can be used to
update the drivers. For more information, see Automatic Configuration on page 101.
To configure the drivers manually after installing a hard disk, follow these steps:
1.
In Windows Vista, Windows 7, and Windows Server 2008, click the Start button, click Control
Panel, click Hardware and Sound, and then click Printers.
In Windows XP and Windows Server 2003, click Start, click Settings, and then click Printers
and Faxes.
2.
Right-click the product name.
3.
Click Properties or Printer properties.
4.
Click the Device Settings tab.
5.
Select Installed for the Printer Hard Disk under Installable Options, and then select
Installed in the drop-down menu.
6.
Click OK to make the printer hard disk and job-storage features available.
You can disable the job-storage feature while leaving the printer hard disk enabled. To disable the jobstorage feature, follow these steps:
1.
In Windows Vista and Windows 7, click the Start button, click Control Panel, click
Hardware and Sound, and then click Printers.
In Windows XP, Windows Server 2003, and Windows Server 2008, click Start, click Settings,
and then click Printers and Faxes.
86
2.
Right-click the product name.
3.
Click Properties or Printer properties.
4.
Click the Device Settings tab.
Chapter 3 HP PCL 6 print driver for Windows
ENWW
5.
Select Job Storage.
6.
Select Disabled in the Change 'Job Storage' Setting dialog box that appears.
If the job-storage feature is enabled (without installing a hard disk but with at least 288 MB of total
memory), two Job Storage Mode settings are available on the Job Storage tab:
●
Proof and Hold
●
Personal Job
Two additional Job Storage Mode settings become available on the Job Storage tab if a hard
disk is installed:
●
Quick Copy
●
Stored Job
The following figure shows the Job Storage tab.
Figure 3-16 Job Storage tab
The Job Storage tab contains the following controls:
NOTE: Information about using the job-storage feature when printing is also provided here.
ENWW
Job Storage tab features
87
●
Status group box
●
Job Storage Mode
●
Make Job Private/Secure
●
User Name
●
Job Name
●
Job Notification Options
●
Use job-storage features when printing
Status group box
The unlabeled group box on the Job Storage tab contains a status message about the destination of
a print job. The status information changes depending on the selections that are made on the Job
Storage tab.
Job Storage Mode
Use the Job Storage Mode options on the HP LaserJet Enterprise 600 M601, M602, and M603
Series Printer product to store documents at the product and then control their printing at the product
control panel.
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product offers the following
Job Storage Mode options:
●
Off
●
Proof and Hold
●
Personal Job
●
Quick Copy
●
Stored Job
These options and the settings that control them are described below.
Off
When selected, this option turns the job-storage feature off (it is disabled), which means that the print
job will not be stored in the product.
Proof and Hold
To use the Proof and Hold option, the job-storage feature must be enabled.
When selected, this option stores the print job in memory and prints only the first copy of the job,
allowing you to check the first copy. If the document prints correctly, you can print the remaining copies
of the print job at the control panel. You can set the number of proof-and-hold print jobs that can be
stored in the product at the control panel.
88
Chapter 3 HP PCL 6 print driver for Windows
ENWW
NOTE: When using the Proof and Hold option, only one copy of the print job is sent to the printer
even if multiple copies are specified in the software application you print from. If multiple copies are
needed while using the Proof and Hold option, they must be specified at the control panel.
After it is released for printing, the proof-and-hold job is immediately deleted from the product. If more
copies are needed, you must reprint the job from the software program. If you send a second proofand-hold job to the product with the same user name and job name as an existing proof-and-hold job
(and you have not released the original job for printing), the job overwrites the existing job. Proof-andhold jobs are deleted if you turn off the product.
NOTE: The product configuration can be set to hold a maximum of 50 quick-copy or proof-and-hold
jobs. The number is set at the product control panel in the CONFIGURATION menu, and the default is
32. When this preset limit is reached, the new document overwrites the oldest held document. Also, a
document that has the same user name and job name as one that is already stored on the printer hard
disk will overwrite the existing document.
Personal Job
To use the Personal Job option, the job-storage feature must be enabled.
When you select Personal Job, the print job is sent to the product, but is not printed until you request
the job at the product control panel. Selecting Personal Job activates the Make Job Private/
Secure group box.
If PIN to print is selected in the Make Job Private/Secure dropdown box, the print job can be
printed only after you type the correct PIN at the control panel. After the job is printed, the job is
immediately deleted from the product. This feature is useful when you are printing sensitive or
confidential documents that you do not want to leave in an output bin after printing.
The PIN number for Personal Jobs must be exactly four digits (0 though 9). If non-numeric characters
are entered for the PIN number, they disappear from the input field. If more than four characters are
entered for the PIN number, the characters past the fourth are truncated. The default value for the PIN is
0000 for Personal Job.
If Encrypt Job (with password) is selected in the Make Job Private/Secure dropdown box,
the print job is sent and stored on the product encyrpted. See Encrypt Job (with password)
on page 91.
After the personal job is released for printing, it is immediately deleted from the product. If more copies
are needed, you must reprint the job from the software program. If you send a second personal job that
has the same user name and job name as an existing personal job (and you have not released the
original job for printing), the job overwrites the existing job, regardless of the PIN. Personal jobs are
deleted if you turn off the product.
Quick Copy
To use the Quick Copy option, a printer hard disk must be installed, and the job-storage feature must
be enabled.
When you select Quick Copy, the entire print job prints and a copy of the print job is stored on the
product, after which you can print additional copies of the print job at the product control panel. The
number of quick-copy print jobs that can be stored in the product is set by using the product control
panel.
ENWW
Job Storage tab features
89
NOTE: The product configuration can be set to hold a maximum of 50 quick-copy or proof-and-hold
jobs. The number is set at the product control panel in the CONFIGURATION menu, and the default is
32. When this preset limit is reached, the new document overwrites the oldest held document. Also, a
document that has the same user name and job name as one that is already stored on the printer hard
disk will overwrite the existing document. Quick Copy jobs are deleted if you turn off the product.
Stored Job
To use the Stored Job option, a hard disk must be installed on the product and the job-storage feature
must be enabled.
Use the Stored Job option to send a print job directly to the printer hard disk without printing it. The
print job is stored in the product as if it is an electronic file cabinet. After the print job is stored on the
printer hard disk, you can print the job at the product control panel.
The job remains stored in the product until it is deleted or overwritten by a document that has the same
user name and job name. Stored jobs remain on the printer hard disk when the product is turned off.
Use this feature for forms and other common or shared documents.
A stored job can be managed in two ways: as either a public or a private job.
To make a stored job public, set the Make Job Private/Secure dropdown box to None.
To make a stored job private, set the Make Job Private/Secure dropdown box to either PIN to
print or Encrypt Job (with password).
Select PIN to print in the Make Job Private/Secure dropdown box to set the private mode
(without encryption). The print job can be printed only after you type the correct, 4–digit PIN at the
control panel. For more information on the PIN to print option, see Personal Job on page 89.
Select Encrypt Job (with password) to set the private mode with encryption. For more information,
see Encrypt Job (with password) on page 91
After the job is printed, the job remains in the product and can be printed again at the product control
panel.
The group box labeled Make Job Private/Secure is usually inactive. The PIN to print and
Encrypt Job (with password) options only become available when you select Stored Job or
Personal Job. If you select PIN to print or Encrypt Job (with password), you must type a PIN
to make the stored job private or else select None.
NOTE: A private stored job is not the same as a personal job. Personal jobs are deleted from the
product after they are printed. Private stored jobs are retained in the product after printing, but require
that a PIN be typed each time they are printed. A printer hard disk is required for Private stored jobs.
Make Job Private/Secure
The Make Job Private/Secure drop-down menu is available when Personal Job or Stored Job
is selected.
90
Chapter 3 HP PCL 6 print driver for Windows
ENWW
PIN to print
Select PIN to print from the drop-down menu, and then type a 4-digit PIN number in the box
provided. The personal or stored job is sent to the product, where you must enter the 4-digit PIN on the
control panel to retrieve the job. For more information on the PIN to print option, see Personal Job
on page 89
Encrypt Job (with password)
The new HP UPD option Encrypt Job (with password) is available for use with firmware (11.2 or
higher), and provides end-to-end secure print job transmission with mutual authentication on the
supported devices. The print job is sent and stored encrypted, and can only be printed after entering
the password on the device.
Set a password for encrypting a job
1.
Enter a sequence of numeric characters, from 4 to 12 numeric characters in length, in the
Password field.
2.
Confirm the password you entered by retyping it in the Confirm field.
NOTE: The key icon next to the Confirm field will change to green when you correctly retype
your password in the Confirm field.
3.
Select Save as default password to save your password and then click the Apply button.
NOTE: If Save as default password is not selected, the password is not saved even if you
print twice from the same application while the application is still open.
If Save as default password is selected with a password and used to print a job, and then
Save as default password is deselected at a later time, the password will still be used as the
default password.
User Name
Use the User Name settings to help identify the job at the product control panel. The following are the
User Name settings:
ENWW
●
User Name. This option associates your Windows user name with the stored print job. The
Windows user name automatically appears in the text field below the User Name options.
●
Custom. Use this option to type a custom name for the stored print job. When you click
Custom, the text field below the option becomes available. The User Name field can contain
no more than 16 characters, and is limited to A through Z and 0 through 9 because the name
appears on the product control-panel display. If you try to type a lowercase character, it
automatically shifts to uppercase. If you try to type a character in an ASCII code of fewer than 32
or more than 126 characters, the character is removed from the edit field, along with all of the
characters that follow it. If you try to type more than 16 characters, any character beyond 16 is
truncated.
Job Storage tab features
91
Job Name
Use the Job Name options to specify a name to identify the job at the product control panel. The
following are the Job Name settings:
●
<Automatic> This option, which is the default selection, automatically generates the job name
that is associated with the stored print job. The file name of the print job is used if it is available to
the print driver. Otherwise, the software program name or a time stamp is used for the job name.
●
Custom. Use this to type a custom job name for the stored print job. When you click Custom,
the text field below the option becomes available. In those languages for which <Automatic>
cannot be translated without the use of invalid characters, the driver uses a string of three dashes.
The acceptable characters for job name and user name vary for each operating system. The string
must be of a length and type that can appear on the product control-panel display.
The Job Name field can contain no more than 16 characters, and is limited to A through Z
(uppercase or lowercase) and 0 through 9 so that the name can appear on the product control-panel
display. If you try to type a character in an ASCII code of fewer than 32 or more than 126 characters,
the character is removed from the edit field, along with all of the characters that follow it. If you try to
type more than 16 characters, any character beyond 16 is truncated.
When the dialog box is closed, or as soon as the focus is removed from the control (that is, when the
Tab key is pressed or another control is selected), an empty string is replaced with <Automatic>. The
acceptable characters for job name and user name vary for each operating system. The string must be
of a length and type that can appear on the product control-panel display.
If Job Name Exists. When you store a print job, you can create a print-job name or the product
software can assign one automatically. If a print job with the same name already exists, the new print
job will overwrite the existing print job. To eliminate the chances of a new print job overwriting an old
print job because both have the same name, select Use Job Name + (1-99). After you create the
print job name, or when one is created automatically, the product software assigns a number between
1 and 99 to the end of the print job name to make the name unique. Select Replace Existing File if
you always want the product software to overwrite an existing print job with the same print job name.
Job Notification Options
Select the Display Job ID when printing checkbox to display the ID of the job while printing.
92
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Use job-storage features when printing
To use job-storage features when printing, follow these steps:
1.
Click File, and then click Print from the software program. The Print dialog box appears.
NOTE: Clicking the print icon in the software program toolbar prints the job without using jobstorage features.
2.
Click Properties or Preferences. The Properties dialog box appears.
NOTE: The label for the button that opens the Printer Preferences dialog box varies between
software programs.
For example, in Adobe Acrobat on Windows 7 the button is labeled Properties. In Internet
Explorer 8 the button is labeled Preferences.
3.
Click the Job Storage tab.
4.
Select the job-storage options by clicking the appropriate option button, and then complete any
required fields.
5.
Click OK.
Release a job-storage print job
After you send a print job that uses the job-storage feature, you can release the job to print from the
product control panel.
1.
Press the Home button
2.
Press the up arrow or the down arrow until Retrieve Job From Device Memory is
highlighted on the product control panel, and then press OK.
3.
Press the up arrow
or the down arrow
to scroll to your user name, and then press OK.
4.
Press the up arrow
or the down arrow
to scroll to the job name, and then press OK.
5.
Press the up arrow or the down arrow
panel, and then press OK.
6.
Press OK.
7.
If a PIN number or Password is assigned to the job, use the number pad to enter the correct PIN or
Password.
to open the menus.
until PRINT is highlighted on the product control
If no PIN number or Password is assigned to the job, continue with the next step.
ENWW
8.
Press the up arrow
9.
Press OK to print the job.
or the down arrow
to select the number of copies to print.
Job Storage tab features
93
Delete a job-storage print job
Sometimes it is necessary to delete a print job from the printer hard disk. You can do this from the
product control panel.
1.
Press the Home button
2.
Press the up arrow or the down arrow until Retrieve Job From Device Memory is
highlighted on the product control panel, and then press OK.
3.
Press the up arrow
or the down arrow
to scroll to your user name, and then press OK.
4.
Press the up arrow
or the down arrow
to scroll to the job name, and then press OK.
5.
Press the up arrow or the down arrow
panel, and then press OK.
6.
Press OK.
7.
If a PIN number or Password is assigned to the job, use the number pad to enter the correct PIN or
Password.
to open the menus.
until DELETE is highlighted on the product control
If no PIN number or Password is assigned to the job, continue with the next step.
8.
94
Press OK to delete the job.
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Services tab features
NOTE: The Services tab is located on the Printing preferences tab set.
The Services tab is shown in the following figure.
Figure 3-17 Services tab
The Services tab contains the following group boxes:
ENWW
●
Internet Services
●
Device services
Services tab features
95
Internet Services
The Internet Services group box contains the Select a destination drop-down menu with the
following selections:
●
Online diagnostic tools. This is the HP Instant Support Web site, where you can find
interactive tools and contacts for troubleshooting.
●
Support and troubleshooting. This is the main Web site for HP LaserJet Enterprise 600
M601, M602, and M603 Series Printer product support.
●
Product manuals. View or download HP LaserJet Enterprise 600 M601, M602, and M603
Series Printer product manuals.
●
Check for driver updates. Automatically check your print drivers to see whether the correct
and most up-to-date print drivers are installed.
If you have Internet access, select any of these items and click Go! to open the corresponding HP Web
page.
Device services
Click the Device and Supplies Status icon to open the Device Status screen of the HP EWS,
which shows supply levels and control panel status.
96
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Device Settings tab features
NOTE: The Device Settings tab is located on the Properties tab set.
Available options depend on the feature. The following figure shows the Device Settings tab.
Figure 3-18 Device Settings tab
The Device Settings tab contains controls for paper-handling devices and controls for managing the
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product.
The Device Settings tab contains the following controls:
●
Form to Tray Assignment
●
Font Substitution Table
●
Installable Options
Form to Tray Assignment
A network administrator can use Form to Tray Assignment to specify the paper size in each input
tray.
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product supports more than
one source of paper. You can assign a form (which defines the paper size and margins) to each paper
source. When a form is matched to a source, you can select the form when you print. The product
prints from the tray to which that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the
paper size that is loaded into each available input tray. The use of forms constrains the choices that are
available in the paper-size list on the Paper/Quality tab in the Printing preferences driver tabs.
ENWW
Device Settings tab features
97
This constraint prevents (or reduces the likelihood of) tying up the product with paper-mount messages
that occur when users request sizes or types that are not available.
The trays listed in the Form to Tray Assignment setting include standard trays and optional
accessory trays. Generally, items that are installed separately have a separate Installable Options
setting.
The input trays listed here are also listed as paper sources on the Paper/Quality tab.
Configuring the trays
1.
Select the appropriate tray in the Form to Tray Assignment list.
2.
Use the drop-down menu to select the paper size (or form) that is loaded in that tray.
3.
Repeat steps 1 and 2 for the remaining trays.
4.
Click OK to enable your settings, or, if necessary, click Cancel to reconfigure all the trays, and
remove the size and type constraints that have been imposed on the Paper/Quality tab.
Font Substitution Table
Use the plus (+) symbol next to theFont Substitution Table settings to change the TrueType to printer
font mapping and to install and remove external fonts for the product through the External Fonts
option. External fonts can be soft fonts or DIMM fonts.
Click the plus (+) symbol next to the Font Substitution Table option to open a list of fonts, as shown
in the following figure. Use the settings to change the TrueType-to-product font mappings.
Figure 3-19 Font Substitution Table
98
Chapter 3 HP PCL 6 print driver for Windows
ENWW
External Fonts
Use the External Fonts option to install and remove external fonts for the product. External fonts can
be soft fonts or DIMM fonts.
Click the External Fonts option to make the Properties button available. Click Properties to open
the HP Font Installer dialog box, which is shown in the following figure.
Figure 3-20 HP Font Installer dialog box
Installing external fonts
Follow these steps to install external fonts.
1.
In Windows Vista and Windows 7, click the Start button, click Control Panel, click
Hardware and Sound, and then click Printers.
In Windows XP, Windows Server 2003, and Windows Server 2008, click Start, click Settings,
and then click Printers and Faxes.
ENWW
2.
Right-click the name of the product.
3.
Click Properties or Printer properties.
4.
Click the Device Settings tab.
5.
Click the External Fonts option. The Properties button appears.
6.
Click Properties. The HP Font Installer dialog box appears.
7.
Type the name and path of the font metric file in the Printer Font File Location text box, or
click Browse to locate the file on the computer. The font file names appear in the Font(s) to be
Added window.
8.
Select the fonts that you want to add, and then click Add. The fonts are installed and the file
names appear in the Installed Font(s) window.
9.
Click OK to close the HP Font Installer dialog box.
Device Settings tab features
99
Removing external fonts
1.
In Windows Vista and Windows 7, click the Start button, click Control Panel, click
Hardware and Sound, and then click Printers.
In Windows XP, Windows Server 2003, and Windows Server 2008, click Start, click Settings,
and then click Printers and Faxes.
2.
Right-click the name of the product.
3.
Click Properties or Printer properties.
4.
Click the Device Settings tab.
5.
Click the External Fonts option. The Properties button appears.
6.
Click Properties. The HP Font Installer dialog box appears. The external fonts that are
installed appear in the Installed Fonts window.
7.
Select the fonts that you want to remove, and then click Remove. The fonts are removed.
8.
Click OK to close the HP Font Installer dialog box.
Installable Options
Items under Installable Options are automatically populated and their defaults set when the driver is
installed.
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product has printing options
that you can install and configure in this section. The following controls are available:
100
●
Automatic Configuration
●
Printer Status Notification
●
Tray 3
●
Tray 4
●
Tray 5
●
Tray 6
●
Envelope feeder
●
Accessory output bin
●
Duplex Unit (for 2-Sided Printing)
●
Allow Manual Duplexing
●
Printer memory
●
Printer Hard Disk
●
Job Storage
Chapter 3 HP PCL 6 print driver for Windows
ENWW
●
Secure Printing
●
Job Separator
●
Mopier Mode
Automatic Configuration
Use the Device Settings tab to tell the driver about the hardware configuration of the product. If
bidirectional communication is enabled in a supported environment, update this tab by selecting the
Update Now setting in the Automatic Configuration setting. The default setting is Off. After an
automatic configuration, the setting returns to Off after the changes are made.
If your environment does not support bidirectional communication, the Update Now setting is
unavailable, so you must manually configure the options on this tab.
If you have more than one driver installed for the product (for example, the default HP PCL 6 Print
Driver and the HP PCL 5 Universal Print Driver), the Update Now feature works automatically only on
the driver on which it is activated. The other driver will not be updated, and might show the default
setting for the specific product model.
Printer Status Notification
When enabled, this option displays a small status-notification window in the lower-right corner of the
screen. This window is visible while printing a document or while viewing the print driver settings. It
provides information about the status of the document being printed as well as information about the
printer, including the current status of the printer supplies.
Tray 3
This control specifies whether you have Tray 3, an additional 500-sheet tray, installed on the product.
Tray 3 comes standard on all HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer
models.
Tray 4
This control specifies whether you have the optional 500 or 1500 sheet tray installed on the product for
Tray 4.
Tray 5
This control specifies whether you have the optional 500 or 1500 sheet tray installed on the product for
Tray 5.
Tray 6
This control specifies whether you have the optional 500 or 1500 sheet tray installed on the product for
Tray 6.
ENWW
Device Settings tab features
101
Envelope feeder
A paper-handling accessory that holds up to 75 envelopes.
Accessory output bin
Provides an additional output bin that holds 500 sheets.
Duplex Unit (for 2-Sided Printing)
The duplexing unit comes installed on the HP LaserJet M602 and the HP LaserJet M603 product
models.
NOTE: The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product supports
smart duplexing. The product uses the smart duplexing feature to detect information on both sides of the
print job pages and only runs the pages through the duplexing unit if printable information appears on
the second side of the page.
Allow Manual Duplexing
Select Allow Manual Duplexing to print on both sides of any supported size and most types of
paper (except transparencies, envelopes, and labels). To use this feature, you must reinsert the paper
stack into the input tray to print the second side. The product pauses while you make this adjustment.
This setting is enabled by default.
Printer memory
Boosts the ability of the product to handle large or complex print jobs. 44 x 32-pin DDR2 memory
DIMM, 512 MB.
Printer Hard Disk
When this option is installed, the Job Storage option and the Mopier Mode are enabled in the
print driver. Use the Job Storage option to store print jobs and then print them later from the control
panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple,
collated copies from a single print job.
Job Storage
When Job Storage is enabled, the product can store print jobs so that you can gain access to those
print jobs later at the control panel.
Secure Printing
The new HP UPD option Encrypt Job (with password) is available for use with this printer and
provides end-to-end secure print job transmission with mutual authentication on the supported devices.
The print job is sent and stored encrypted, and can only be printed after entering the password on the
device.
102
Chapter 3 HP PCL 6 print driver for Windows
ENWW
Setting this to disabled results in the setting Encrypt Job not to be listed under Make Job Private/
Secure on the Job Storage tab.
The default is Automatic, enabling the setting to be selected from the Job Storage tab.
Job Separator
Use this control to specify whether a print job identifier page should be printed between print jobs. The
Job Separator feature is disabled by default.
Mopier Mode
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job. Multiple-original printing (mopying) increases performance and reduces
network traffic by transmitting the job to the product once, and then storing it in memory or on the hard
disk. The remainder of the copies are printed at the fastest speed. All documents that are printed in
mopier mode can be created, controlled, managed, and finished from the computer, which eliminates
the extra step of using a photocopier.
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer supports the transmit-once
mopying feature when the Mopier Mode: setting on the Device Settings tab is Enabled.
When you use the HP PCL 6 Print Driver, mopying is performed in one of two ways: either through the
software or through the product hardware. When mopier mode is enabled, mopying takes place
through the product hardware. One copy of a multiple-page print job is transmitted once through the
network to the product, together with a printer job language (PJL) command directing the product to
make the specified number of copies.
When you disable mopier mode, you are not necessarily disabling multiple collated copies, which the
driver can still perform through the software rather than the product hardware (the mopying path that is
disabled when you change the Mopier Mode setting to Disabled). However, a multiple-copy print
job that is sent when the mopier is disabled loses the advantage of transmitting the print job once,
because the job is sent through the network for each collated copy.
Mopier mode and collation
Mopying and collating print jobs are independent but closely related functions. Mopying, the ability to
send original print jobs to the product, is performed by the print driver. Collating can be controlled by
either the print driver or the document software program. The mopying mode is selected by default in
the driver, and can be disabled by changing the Mopier Mode setting on the Device Settings tab
to Disabled.
Control collation through the print driver by selecting or clearing the Collated check box on the
Advanced tab. Click Copy Count under the Paper Output setting. You can clear the check box,
which is available only when the Copy Count option is set to more than 1 copy, to allow the software
program to control collation.
To receive uncollated multiple copies of a print job, you must clear the Collated check box and make
sure that the software program collation feature is not selected.
ENWW
Device Settings tab features
103
The following table shows the relation between mopier mode settings and collation settings in the
software program and the driver. The first three columns show the settings; the last column, "Expected
result", shows how a 3-page print job would appear.
Table 3-5 Driver mopier mode and collation settings
104
Mopier mode
Application collation
Driver collation
Expected result
Disabled
Not selected
Not selected
3 copies uncollated
Disabled
Not selected
Selected
3 copies uncollated
Disabled
Selected
Not selected
3 copies collated
Disabled
Selected
Selected
3 copies collated
Enabled
Not selected
Not selected
3 copies uncollated
Enabled
Not selected
Selected
3 copies uncollated
Enabled
Selected
Not selected
3 copies collated
Enabled
Selected
Selected
3 copies collated
Chapter 3 HP PCL 6 print driver for Windows
ENWW
About tab features
NOTE: The About tab is located on the Properties tab set.
The About tab provides detailed information about driver component versions. It contains an overall
build version number (in parentheses after the model name) together with specific information about
each of the components. The information varies according to the HP LaserJet Enterprise 600 M601,
M602, and M603 Series Printer model number, driver, date, and versions. The About tab is shown in
the following figure.
Figure 3-21 About tab
The About tab lists driver installation file names and their version numbers. The About tab also
indicates whether the driver was autoconfigured, whether administrator preferences were set, the date
the driver was last configured, and whether the configuration is autoconfigured or user-configured.
The About button is also available on most driver screens. The About button provides a driver version
number and creation date.
NOTE: The HP PCL 6 print driver is installed by default when using the installer CD. It can also be
downloaded from www.hp.com with an installer or just the driver. In all cases, the driver will be listed
as UPD Version 5.3.0.10295. This refers to the HP PCL 6 driver version NOT the UPD driver
version as stated. This will be removed in a future version of the driver.
ENWW
About tab features
105
106
Chapter 3 HP PCL 6 print driver for Windows
ENWW
4
Mac OSX software and utilities
Introduction
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer comes with software and
installers for Apple, Inc. Macintosh systems.
This chapter provides procedures for installing and removing the HP LaserJet Enterprise 600 M601,
M602, and M603 Series Printer printing-system software for Macintosh operating systems, as well as
descriptions about the software and utilities. The chapter provides information about these topics:
ENWW
●
Determine the Mac driver version
●
Supported operating systems for Macintosh
●
Printing-system software
●
Macintosh installation instructions
●
Remove software from Mac operating systems
●
HP Printer Utility for Mac
Introduction
107
Determine the Mac driver version
Mac OS X v10.5, v10.6, and v10.7
108
1.
From the Apple menu , click the System Preferences menu and then click the Print & Fax
icon (Mac OS X v10.5 and 10.6) or the Print and Scan icon (Mac OS X v10.7).
2.
Select the product in the left side of the window.
3.
Click the Options & Supplies button.
4.
Click the General tab to view the driver version number.
Chapter 4 Mac OSX software and utilities
ENWW
Supported operating systems for Macintosh
The product supports the following Mac operating systems:
●
Mac OS X v10.5, v10.6, and v10.7. The installer CD only supports OS X v10.5 and v10.6.
Drivers for OS X v10.7 are available through Apple Software Update.
NOTE: For Mac OS X 10.5 and later, PPC and Intel® Core™ Processor Macs are supported.
Macintosh system requirements
Hardware requirements
●
PowerPC G4, G5 or Intel Core processor
●
256 MB RAM
●
175 MB of available hard-disk space
●
CD-ROM, DVD drive or Internet connection
Supported printer drivers for Mac
The HP LaserJet software installer provides PostScript® Printer Description (PPD) files, Printer Dialog
Extensions (PDEs), and the HP Utility for use with Mac OS X computers. The HP printer PPD and PDE
files, in combination with the built-in Apple PostScript printer drivers, provide full printing functionality
and access to specific HP printer features.
Change printer-driver settings for Mac
Change the settings for all print
jobs until the software program
is closed
Change the default settings for
all print jobs
Change the product configuration
settings
1.
On the File menu, click the Print
button.
1.
On the File menu, click the Print
button.
Mac OS X 10.5 and 10.6
2.
Change the settings that you want
on the various menus.
2.
Change the settings that you want
on the various menus.
3.
On the Presets menu, click the
Save As... option and type a
name for the preset.
These settings are saved in the Presets
menu. To use the new settings, you must
select the saved preset option every time
you open a program and print.
ENWW
1.
From the Apple menu
, click the
System Preferences menu and
then click the Print & Fax icon or
the Print & Scan icon for OS X
10.7.
2.
Select the product in the left side of
the window.
3.
Click the Options & Supplies
button.
4.
Click the Driver tab.
5.
Configure the installed options.
Supported operating systems for Macintosh
109
Printing-system software
The product includes the following software for Macintosh computers:
●
PDEs for Mac OS X v10.5 and v10.6 only. Mac OS X v10.7 drivers are available for download
from Apple Software Update. The installer CD does not support OS X v10.7.
PDEs
Printer Dialog Extensions (PDEs) are code plug-ins that provide access to product features, such as
number of copies, duplexing, and quality settings. The PDEs are HP additions to Apple's print driver.
HP Embedded Web Server
Mac OS X v10.4 and later support the HP Embedded Web Server (HP EWS). Use the HP LaserJet
Utility to control features that are not available in the driver. Use the HP EWS to perform the following
tasks:
●
Name the product and assign it to a zone on the AppleTalk network.
●
Change product settings.
●
Set a password for the product.
●
From the computer, lock out functions on the control panel to prevent unauthorized access (see the
printing-software help).
Online help
This HTML-based help system replaces the Apple Guide help system that was provided with
Mac OS 9.x HP products. The help system is in English only, and can be viewed through a browser or
in the Macintosh OS Help Center.
Screen fonts
The printing-system software for Macintosh operating systems no longer includes a font installer. The
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product uses previously installed
system fonts when it is installed on a Macintosh computer.
110
Chapter 4 Mac OSX software and utilities
ENWW
Macintosh installation instructions
On a Macintosh computer, the installation procedures are basically the same for a network
administrator, a network client, and a single user. Install the software on any computer that has save
rights to the product. Users must have Administrator rights to install the software.
NOTE: If the computer is connected to the product by a LocalTalk (printer port) connection, you must
configure the AppleTalk (or network) control panel for the correct connection to communicate with the
product. You must set up the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer,
connect it to the computer or network, and turn it on before the software is installed. Macintosh
operating systems do not support parallel connections.
The Macintosh partition contains an installer program for each language. Find the appropriate
language for the operating system that is being used, and then use the installer program for that
language.
NOTE: Detailed installation steps can be found in Mac OS X installation on page 112.
HP LaserJet software CD, Macintosh partition
The files contained in the Macintosh partition of the HP LaserJet software CD are grouped by language
and reside in the following directory:
●
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer
●
Doocuments
Install the HP LaserJet printing-system software for the Macintosh
OS
Topics:
●
General installation instructions
●
Mac OS X installation
●
Setup instructions
General installation instructions
1.
Insert the Macintosh printing-system software CD into the CD-ROM drive.
NOTE: If the CD screen does not open automatically, double-click the CD-ROM icon on the
desktop to open the CD-ROM window.
2.
ENWW
Double-click the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer icon.
Macintosh installation instructions
111
3.
Follow the onscreen instructions to complete the software installation.
NOTE: If you are installing the printing-system software on a Macintosh OS X system, be patient.
The installer must perform an initial search of the computer for up to 1 minute. During this time the
installer might appear to be stalled.
4.
When software installation is complete, click Close.
Mac OS X installation
This section provides information about the various installation dialog-box sequences for the Mac OS X
operating system.
Main Install dialog box sequence
NOTE: If you are connecting the product to a network or with a USB cable, connect the network
cable to the network port.
1.
Insert the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system
software CD in the CD-ROM drive.
NOTE: If the CD screen does not open automatically when the CD is put into the CD-ROM drive,
double-click the CD-ROM icon on the desktop to open the installer folder.
2.
The installer program opens.
Figure 4-1 Mac installer opening screen
NOTE: The file name displayed on your HP LaserJet installer browser screen may be different
than the file name displayed in the above figure.
NOTE: In the HP LaserJet installer browser screen, double-click the Documents icon to gain
access to the product user guide. You can also select a language folder and locate the available
ReadMe file which is in .htm format.
112
Chapter 4 Mac OSX software and utilities
ENWW
3.
In the HP LaserJet installer browser screen, double-click the product icon to open the installer
program Introduction dialog.
Figure 4-2 Mac installer Introduction dialog
ENWW
Macintosh installation instructions
113
4.
Click the Continue button. The License dialog appears.
Figure 4-3 Mac installer License dialog
5.
You can save or print the license file by clicking the Save button or the Print button.
6.
Read the software license agreement, and then click the Continue file. The license agreement
dialog appears.
Figure 4-4 Mac installer license agreement dialog
114
Chapter 4 Mac OSX software and utilities
ENWW
7.
Click the Disagree button to end the installation and close the installer, or click the Agree button
to continue the installation.
Figure 4-5 Mac installer Destination Select dialog
ENWW
Macintosh installation instructions
115
8.
Select the destination for the software and click Continue. The Installation Type dialog
appears.
Figure 4-6 Mac installer Installation Type dialog
116
Chapter 4 Mac OSX software and utilities
ENWW
9.
Click the Go Back button to go back to the previous screen.
To change the installation location, click the Change Install Location button, navigate to the
desired location, click the Continue button, and then click the Install button. Go to step 9.
Click the Install button to continue the standard installation. Go to step 9.
Click the Customize button to open a dialog that lists separate software programs that you can
choose to install.
Figure 4-7 Mac installer custom installation dialog
Click the Standard Install button to revert to the standard installation process.
Click Go Back to go back to the previous dialog box.
Use the check boxes in the Package Name list to select the printing-system components to
install, and then click the Install button.
ENWW
Macintosh installation instructions
117
10. An authentication dialog appears. Type the required user name and password, and then click the
OK button.
Figure 4-8 Mac installer authentication dialog
11. The Installation dialog appears. A progress bar shows the percentage of the installation
progress that has been completed. Allow the program to install the software.
Figure 4-9 Mac installerInstallation dialog
118
Chapter 4 Mac OSX software and utilities
ENWW
12. The Add Printer dialog appears. Click the Add Printer... button to add your printer to the list
of available printers.
Figure 4-10 Mac installerAdd Printer dialog
Figure 4-11 Select printer to add dialog
ENWW
Macintosh installation instructions
119
13. When the installation is complete, the Summary dialog appears, stating that the installation was
successful.
Figure 4-12 Mac installer Summary dialog
Click the Close button to exit the installer.
Setup instructions
This section contains information about the following topics:
●
Setting up a printer with Mac OS X v10.5 and v.10.6
●
Troubleshooting the product setup
Setting up a printer with Mac OS X v10.5 and v.10.6
Complete these steps after completing the printing-system software installation if you did not add a
printer when running the installer.
120
1.
If you are installing the product using a USB connection, connect the USB cable between the
product and the computer if you have already not done so. Turn on the product. If you are
installing using a network connection, verify that the network cable is connected to the product
and that the product is on.
2.
Max OS X 10.5 and 10.6: From the Apple menu
click the Print & Fax icon.
Chapter 4 Mac OSX software and utilities
, click the System Preferences menu, then
ENWW
3.
If you are installing the product using a USB connection, verify that the product appears in the
printer list. The Name column in the printer list should display the product name. If this is the
case, the USB setup is complete.
If the product does not appear, or if the correct information does not appear in the field, see
Troubleshooting the product setup on page 123.
If you are installing the product using a network connection, continue with the following steps.
4.
Max OS X 10.5 and 10.6: Click the plus symbol in the Printer List to open the Printer
Browser screen.
5.
You can use either Bonjour (default browser) or IP Printing for the network connection.
NOTE: Bonjour is the easiest method and is the best method to use if the product is installed on
your local network.
IP Printing must be used if you are installing the product on a different network.
If you are using Bonjour, carry out the following steps:
a.
Click the Default Browser tab.
b.
Select the product from the list. The software verifies that the product is connected to the
network and the Print Using field is automatically populated with the correct PPD for the
product.
NOTE: If you are on a network that has more than one product, print a configuration page
and match the Bonjour Printer Name to the name on the list to identify the product that you
are installing.
NOTE: If the product does not appear in the list, verify that the product is on and
connected to the network, then try turning the product off and then on again. If the product
PPD does not appear in the Print Using pull-down list, turn the computer off and then on
again, then restart the setup process. For more troubleshooting information, see
Troubleshooting the product setup on page 123.
c.
Click the Add button.
d.
You are finished with the setup process.
If you are using the IP Printing method, carry out the following steps:
ENWW
a.
Click the IP Printer tab.
b.
Choose HP Jet Direct – Socket from the Protocol pull-down menu. This is the
recommended setting for HP products.
Macintosh installation instructions
121
c.
At the product control panel, touch the Network Address button to identify the product IP
address or host name.
If the Network Address button is not visible, you can find the IP address or host name by
printing a configuration page.
i.
At the product control panel, scroll to and touch the Administration button.
ii.
Open the following menus:
●
Reports
●
Configuration/Status Pages
●
Configuration Page
iii. Touch the View button to view the information on the control panel, or touch the Print
button to print the pages.
iv. Find the IP address on the Jetdirect page.
Figure 4-13 IP location on the Jetdirect page
Jetdirect Page
HP Color LaserJet
Page 1
v.
IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually
configure the IP address. Otherwise, the network configuration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not,
you must manually configure the IP address.
122
d.
Type the IP address into the Address field on the add printer screen.
e.
The Name, Location, and Print Using information will automatically be filled in. If the
product PPD does not appear in the Print Using field, turn the computer off and then on
again and restart the setup process.
6.
Mac OS v10.5 and v10.6: Select the product ,click the Options and Supplies button, then
click the Driver button.
7.
In Mac OS X v10.5 and v10.6 each optional tray is listed with a checkbox or a dropdown list.
Chapter 4 Mac OSX software and utilities
ENWW
8.
For Mac OS v10.5 and v10.6: The amount of memory is set automatically.
9.
If the product has a hard disk, select the check box next to Printer Disk. Iit should be selected by
default.
10. If the product has a duplex unit, select the Duplex Unit check box.
11. Select the appropriate options in the drop down lists for the following items:
●
HP LaserJet 500-sheet 5-bin Mailbox
●
HP 500-Sheet Stapler/Stacker
●
HP 500-Sheet Stacker
12. After you have selected the settings in the Driver screen, click Continue. The product name
appears in the Printer List and the setup is complete.
Troubleshooting the product setup
If the product does not appear in the printer list after an installation:
Complete each one of these solutions in the order given, and restart the setup process after each one to
see if the issue has been resolved.
●
Verify that the USB or network cable is connected between the product and the computer and that
the product is powered on.
●
Try disconnecting and reconnecting the cable. If the computer has more than one USB port, try a
different USB port.
●
Turn the product off and then back on.
●
Turn the computer off and then back on.
●
If you are using a USB hub on the computer, disconnect any other USB devices from the hub.
If the wrong PPD appears in the Kind column in the printer list after installation:
1.
Unplug the USB cable.
2.
Delete the print queue with the incorrect type (for example, Generic PostScript Printer).
3.
Reinstall the printing-system software.
4.
Turn the computer off and then on.
5.
Reconnect the USB cable from the computer to the product.
If these steps do not resolve the problem, delete the incorrect print queue, click Add, choose the
product from the list, and then browse manually for the product PPD.
ENWW
Macintosh installation instructions
123
Remove software from Mac operating systems
You must have administrator rights to remove the software.
1.
Open System Preferences.
2.
Select Print & Fax.
3.
Highlight the product.
4.
Click the minus (-) symbol.
5.
Delete the print queue, if necessary.
6.
Delete the .GZ file from the following hard-drive folder:
●
Mac OS X v10.4: Select Macintosh HD, then go to the following directory Library/
Printers/PPDs/Contents/Resources/<lang>.lproj, where <lang> is the two-letter
language code for the language that you are using.
●
Mac OS X v10.5, v10.6, and v10.7: Select Macintosh HD, then go to the following
directory Library/Printers/PPDs/Contents/Resources.
NOTE: In Finder, if Macintosh HD is not viewable in the list, go to Finder/
Preferences/Sidebar/Devices/ and then select Hard Disk.
124
Chapter 4 Mac OSX software and utilities
ENWW
HP Printer Utility for Mac
The HP Printer Utility is a software program that gives you access to the product in Mac OS X.
The HP Printer Utility does not work when it is installed by using the AppleTalk protocol. Use IP, Bonjour
or Rendezvous to enable the HP Printer Utility.
The following topics are discussed:
●
Access to the HP (Printer) Utility
●
Information and support area
●
Printer Settings
Click the HP Support button to go to the HP Online Support Web site for more help on any of
these topics.
Access to the HP (Printer) Utility
In Mac OS X v10.5 and v10.6, follow these steps to gain access to the HP (Printer) Utility:
1.
Mac OS X 10.5 and above: Open the Finder, click Applications, click Utilities, and then
double-click Printer Setup Utility.
-orMac OS X 10.5 and above: From the Printer Browser menu, click Printer Utility
-orMac OS X 10.5 and above: From the Print Queue, click the Utility icon.
ENWW
HP Printer Utility for Mac
125
2.
The main HP Utility screen appears. Click the product in the Devices list.
Figure 4-14 HP Utility — main screen
The following sections describe the screens and features that are available in the HP Utility.
126
Chapter 4 Mac OSX software and utilities
ENWW
Information and support area
Supplies Status
In the Information And Support section of the HP Utility, click Supplies Status to open the
Supplies Status screen.
Figure 4-15 HP Utility — Supplies Status screen
Click Detailed Supplies Information… to open the Supplies Status details screen.
Use the scroll button to see information about the print cartridge and kit.
On the Supplies Status screen, click Media to see the status of the trays.
You can also order supplies at anytime by clicking Supplies in the toolbar on the HP Print Utilities
main screen.
ENWW
HP Printer Utility for Mac
127
Device Information
In the Information And Support section of the HP Utility, click Device Information to find the
product Service ID (if assigned), the firmware version (FW Version), and the Serial Number.
Figure 4-16 HP Utility — Device Information screen
File Upload
In the Information And Support section of the HP Utility, click File Upload to open the File
Upload screen.
Figure 4-17 HP Utility — File Upload screen
The File Upload command is supported for file types that can be sent directly to the product without
first being opened through a software program. Some files can be uploaded to the product, but some
cannot.
Documents in the following file formats can be printed by using a command line. That is, they do not
need to be opened in a software program that supports the file format (such as the Adobe Acrobat or
128
Chapter 4 Mac OSX software and utilities
ENWW
Acrobat Reader programs for .PDF files), but can be sent directly to the product by using the File
Upload command.
●
HP LaserJet printer command language (.PRN)
●
Portable document format (.PDF)
●
Postscript (.PS)
●
Text (.TXT)
On the File Upload screen, click Choose… to open a navigation screen. Locate the file you want to
upload and click Open.
On the File Upload screen, click Display response from the device to see whether the upload
was successful. If the file loads successfully, no message appears.
On the navigation screen, select the file and click Open. The file name appears in the File Upload
screen of the HP Printer Utility. Click Upload.
Upload Fonts
In the Information And Support section of the HP Utility, click Upload Fonts to gain access to
fonts that you can upload to the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer
product.
Figure 4-18 HP Utility — Upload Fonts screen
The drop-down menu in the Upload Fonts pane has the following options:
ENWW
●
Memory. Fonts that are available in the printer memory are listed.
●
Disk. Select this option to show any fonts that are installed on the printer hard disk or flash disk.
By default, no fonts are stored on either of these disks. To upload fonts, select the font name, and
then click Add.
HP Printer Utility for Mac
129
Update Firmware
NOTE: This option is available only after you open the View menu and select the Show
Advanced Options menu item.
The firmware file can be downloaded from the following Web site:
www.hp.com/go/lj600Series_firmware
Figure 4-19 HP Utility — Update Firmware screen
After you have the firmware file, you are ready to begin the update process. Complete the following
steps:
1.
In the Information And Support section of the HP Utility, select Update Firmware, click
Choose, browse to the firmware upgrade file, and then click Open.
2.
On the Update Firmware screen, click Upload.
NOTE: You might receive an error message on the screen indicating that the product is offline.
Verify that the product is turned on. If the product is turned on, ignore the message. The
Updating screen appears and the update proceeds as expected.
3.
The update process can take several minutes. Let the process finish without further interaction with
the product or the computer.
NOTE: The product automatically turns off and then on again to activate the update; this can
happen more than once. At the end of the update process, the READY message appears on the
control panel. Do not turn off the product or interfere with the update until you see this message.
4.
130
Print a configuration page and verify that the firmware revision number matches the revision of the
current update.
Chapter 4 Mac OSX software and utilities
ENWW
Marketsplash by HP
Click the Go button in the Marketsplash by HP section to visit an HP web site and find information
on using your product to create marketing information.
Figure 4-20 HP Utility — Marketsplash by HP
Commands
NOTE: This option is available only after you open the View menu and select the Show
Advanced Options menu item.
The Commands screens gives the user the ability to send special characters or print commands to the
product after the print job.
ENWW
HP Printer Utility for Mac
131
Figure 4-21 HP Utility — Commands screen
Printer Settings
Supplies Management
In the Printer Settings section of the HP Utility, click Supplies Management to open the
Supplies Management screen.
Figure 4-22 HP Utility — Replace Supplies screen
132
Chapter 4 Mac OSX software and utilities
ENWW
The Supplies Management screen allows you to define how the product responds when the supply
states are At Very Low for cartridges, image transfer/fuser kits, and the toner collection unit. The
Supplies Management screen also allows you to define when that very low message state or alert
is given by setting the User Defined Low Threshold (the percentage of estimated supply life left, at
which you want the product to alert you that the supply is low).
In the Cartridge Behavior at Very Low area, select one of the following actions for the product to
take when the black cartridge, or other parts or kits, are At Very Low.
●
Stop
●
Prompt to Continue
●
Continue
In the User Defined Low Threshold area, select a percentage life remaining next to the cartridge
or image transfer/fuser kit to define the low threshold alert level for that cartridge or image transfer/
fuser kit.
Click Apply Now to save the new settings.
Economode & Toner Density
In the Printer Settings section, click the Economode & Toner Density icon to open the
Economode & Toner Density screen.
Figure 4-23 HP Utility — Economode & Toner Density dialog
Use the Economode & Toner Density screen to enable or disable the Economode setting, or adjust
the Toner Density setting.
ENWW
HP Printer Utility for Mac
133
Resolution
In the Printer Settings section, click the Resolution icon to open the Resolution screen.
Figure 4-24 HP Utility — Resolution dialog
Use the Resolution screen to set the default resolution setting and to set the Resolution Enhancement
Technology (REt) level.
134
Chapter 4 Mac OSX software and utilities
ENWW
Trays Configuration
The Trays Configuration screen is shown in the following figure.
Figure 4-25 HP Utility — Trays Configuration screen
1.
In the Printer Settings section of the HP Utility, select Trays Configuration to change paper
size and type for each of the trays installed on your product.
2.
To change the paper type, select a tray and then select a different paper type in the Default
Media Type drop-down menu.
NOTE: Some trays can detect the media size and may be greyed out.
3.
To change the paper size, select a tray and then select a different paper size in the Default
Media Size drop-down menu.
4.
Click Apply Now to save the settings.
Output Devices
In the Printer Settings section, click the Output Devices icon to open the Output Devices
screen. The screen shows the paper handling devices on the product and allows configuration.
The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer supports three paper-handling
devices:
ENWW
●
HP LaserJet 500-sheet 5-bin Mailbox
●
HP 500-Sheet Stapler/Stacker
●
HP 500-Sheet Stacker
HP Printer Utility for Mac
135
If no paper handling devices are installed, the Output Devices screen will appear as shown in Figure
4-26 HP Utility — Output Devices screen on page 136.
Figure 4-26 HP Utility — Output Devices screen
Various options can be selected when an output device is installed. For example, the HP 500-Sheet
Stapler/Stacker options are listed below:
●
Click the Stapling Mode drop-down list to change the stapler/stacker stapling mode.
●
Click one of the Staple-out Mode options to change the product behavior when the staple
cartridge runs out of staples.
Duplex mode
For the HP LaserJet Enterprise 600, 601dn, 602dn, 603dn and HP LaserJet Enterprise 600, M602h,
M603xh product models, the Printer Settings section includes a Duplex Mode setting. Click this
setting to open the Duplex Mode screen.
Figure 4-27 HP Utility — Duplex Mode screen
136
Chapter 4 Mac OSX software and utilities
ENWW
Use the Enable Duplex Mode command to print internal diagnostic and test pages on both sides of the
page.
1.
Select the Enable Duplex Mode check box. This box is clear by default.
2.
Click Apply Now to enable printing on both sides of the page.
Protect Direct Ports
In the Printer Settings section of the HP Utility, select Protect Direct Ports to disable printing over
USB and parallel ports. JetDirect, embedded network connectivity, and third-party add-on cards, such
as FireWire, will not be affected by this setting.
Figure 4-28 Protect Direct Ports screen
Click Disable Direct Ports.
ENWW
HP Printer Utility for Mac
137
Network Settings
In the Printer Settings section of the HP Utility, select Network Settings to open the IP Settings
screen.
Figure 4-29 IPv4 Settings screen
The Network Settings screen provides access to IPv4, IPv6, Bonjour Settings, and Other
Settings.
Select Configuration, to modify the following settings:
●
DHCP
●
BootP
●
Manual
You can also use this screen to modify the following settings:
●
Host Name
●
IP Address
●
Subnet Mask
●
Default Gateway
To save new settings, click Apply Now.
To view and change other network settings, click Other Settings, then click Additional Network
Settings.
If a user name and password have been set, you might need to obtain them from your IT administrator.
For more information, see the HP EWS online help.
138
Chapter 4 Mac OSX software and utilities
ENWW
The HP EWS opens to the Networking screen.
To view and change the Bonjour network settings, click Bonjour Settings. Bonjour is enabled by
default.
To disable Bonjour, click to clear the Enable Bonjour check box and then click Apply Now.
Figure 4-30 Bonjour Settings screen
Select Bonjour Settings to open the Bonjour Settings screen. Bonjour is enabled by default.
The following options are available in the The highest priority service drop-down menu:
●
Port 9100
●
IPP
●
LPD-RAW
●
LPD-TEXT
●
LPD-AUTO
●
LPD-BINPS (default)
After you select a new setting, click Apply Now to save it.
ENWW
HP Printer Utility for Mac
139
Additional Settings
In the Printer Settings section of the HP Utility, select Additional Settings to gain access to the
HP EWS.
Figure 4-31 Additional Settings screen
To open the HP EWS, click Open Embedded Web Server.
For information about HP EWS settings, consult the HP EWS online help.
140
Chapter 4 Mac OSX software and utilities
ENWW
5
Engineering details
Introduction
This chapter presents engineering detail for the following topics:
ENWW
●
Paper attributes and commands
●
File to E-mail utility
Introduction
141
Paper attributes and commands
This section includes the following information about paper attributes:
●
Paper-source commands
●
Paper-type commands examples
Paper-source commands
The PCL 6 Print driver attribute for paper source is ubyte # MediaSource or ubyte_array
"string" MediaSource. See the following table for values of #. For example, "ubyte 4
MediaSource" is the command for Tray 2.
The PCL 5 print driver escape sequence for paper source is Esc&l#H (the "l" is a lowercase "L" rather
than the numeral "1"). See the following table for values of #. For example, Esc&l1H is the command
for Tray 2.
NOTE: The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer products support Tray
1, Tray 2, and Tray 3.
Table 5-1 Paper-source commands
Input source
PCL 5
PCL 6
PCL 6
PostScript
Esc&l#H
ubyte #
MediaSource
ubyte_array
"string"
MediaSource
/MediaPosition
# or null/
ManualFeed true
or false
Automatically select
NA
NA
NA
NA
Printer auto select
7
1
AUTOSELECT
null false
Manual feed in tray 1
2
2
MANUALFEED
3 true
Tray 1 (100-sheet)
4
3
TRAY1
3 false
Tray 2 (250-sheet)
1
4
TRAY2
0 false
Tray 3 (500-sheet)
5
5
TRAY3
1 false
Paper-type commands examples
The PCL 5 print driver escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the
number of characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain",
"Plain" has 5 letters plus 1, for a total of 6.
Table 5-2 Paper-type commands
142
Esc&
n#
Wd
Paper type
Esc&
6
Wd
Plain
Esc&
11
Wd
Preprinted
Chapter 5 Engineering details
ENWW
Table 5-2 Paper-type commands (continued)
1
2
Esc&
n#
Wd
Paper type
Esc&
11
Wd
Letterhead
Esc&
13
Wd
Transparency1
Esc&
11
Wd
Prepunched
Esc&
7
Wd
Labels
Esc&
5
Wd
Bond
Esc&
9
Wd
Recycled
Esc&
6
Wd
Color
Esc&
6
Wd
Light
Esc&
13
Wd
Interpaperte
Esc&
6
Wd
Heavy
Esc&
12
Wd
Extra Heavy
Esc&
11
Wd
Cardstock2
Esc&
6
Wd
Rough
Esc&
7
Wd
Glossy
Esc&
12
Wd
Tough Paper
Esc&
9
Wd
Envelope
You must spell out the word "Transparency" in the string, although it is abbreviated as TRNSPRNCY on the control panel.
The correct command for cardstock is "Esc&n11WdCard Stock", with a space between the "d" and the "S", and with an
uppercase "S".
File to E-mail utility
The File to E-mail utility collects the data specified in an .INI file and then attaches the data files to an email that can be sent to HP Customer Support to assist troubleshooting. The utility runs on the computer,
but does not interact with the product.
The tool is included on the installer CD, but is not copied to the computer during the software
installation. HP Customer Support can also send the utility by e-mail or by posting it to an HP Web site.
The tool is compatible with Windows XP, Windows Vista, and Win 7.
The File to E-mail utility runs with any MAPI-compliant e-mail applications. It does not run with Webbased e-mail services such as Yahoo, Hotmail, or AOL.
Depending on the speed of the computer, it might take a few minutes for the utility to gather the log
files and attach them to an e-mail message.
ENWW
File to E-mail utility
143
The File to E-mail utility consists of two files that are located in the util folder on the product printingsystem software CD:
●
<CD-ROM drive>Utilities\FileToEmail.exe
●
<CD-ROM drive>Utilities\FileToEmail.ini
To use the File to E-mail utility, copy these files to the desktop, navigate to them in Explorer, and doubleclick FileToEmail.exe to open the utility. The utility generates files, opens an e-mail message, and
attaches the files so that you can send them to the system administrator.
If the File to E-mail utility is not successful for any reason (for instance, if you cancel the new message or
you are using Web-based e-mail software), all the files are copied to a folder on the desktop that is
named HpCCC, possibly with strings of zeros attached to the end. You can zip these files and e-mail
them separately.
144
Chapter 5 Engineering details
ENWW
Index
A
accessories, automatic
configuration 14
Alternative Letterhead Mode
supported products 58
Apple Mac OS
see Mac OS 10
autoconfiguration, driver
support for 14
autoconfiguration, Enterprise
about 14
B
bidirectional communication
about 14
Enterprise AutoConfiguration
14
Bonjour
identifying 18
booklet printing
Booklet Layout settings 83
browser requirements
HP embedded Web Server 18
C
cardstock, paper type commands
143
CD
directory structure, Macintosh
111
directory structure, Windows 3
languages 3
Macintosh printing-system
software installation 111
components, software
Macintosh 110
Windows 10
configuration, driver 16
ENWW
connection type
installation 33, 35
connectivity
bidirectional communication
support 14
constraint messages
print drivers 54
copies
Quick Copy setting 89
covers
settings 69
custom paper types
adding 68
D
DDU
see HP Driver Deployment
Utility 17
Device Status screen
EWS 96
diagnostics
troubleshoot 95
dialog boxes, printing-system
software installation
Mac OS X 112
directory structure, software CD
Macintosh 111
Windows 3
disk space requirements
Macintosh 109
document preview image 53
documentation
languages 9
drivers
accessory configuration 14
Automatic Configuration
setting 101
changing settings (Mac) 109
document preview image 53
Enterprise AutoConfiguration
14
included 10
languages 7
Linux OS 27
network configuration 16
Printing preferences tab 53
scan 10
Update Now, bidirectional
communication 101
drivers, install
license agreement 32
drivers, Windows
change settings 52
duplexing 80
Tray 3 102
E
e-mail
troubleshooting File to E-mail
utility 143
Embedded Web Server (EWS)
features 18
network connection 18
Enterprise AutoConfiguration
about 14
envelopes, paper type
commands 143
escape sequences
paper source 142
paper type 142
Explorer, versions supported
HP Embedded Web Server 18
F
File to E-mail utility 143
File Upload, Macintosh 128
firmware
Macintosh updates 130
Index
145
remote update, Macintosh
130
upload, HP Printer Utility 130
fonts
install/remove external fonts
98
Macintosh 110
Send True Type as Bitmap, print
drivers 57
True Type, print drivers 56
Upload Fonts, HP Printer
Utility 129
upload, Configuration Settings
menu 129
G
general configuration
HP Embedded Web Server 20
H
heavy paper, paper type
commands 143
help
Macintosh 110
print drivers 54
host-based driver
document preview image 53
Printing preferences tab 53
HP (Printer) Utility, Macintosh
access 125
HP Driver Configuration 16
HP Driver Deployment Utility
(DDU) 17
HP Driver Preconfiguration
HP Driver Configuration
Editor 16
HP Web Jetadmin Driver
Configuration 17
support guide 17
HP Embedded Web Server
general configuration 20
HP Printer Utility, accessing
from 140
information pages 19
Macintosh support 110
network settings 22
other links list 22
print tab 21
security settings 21
troubleshooting tools 21
146
Index
HP Embedded Web Server (EWS)
features 18
network connection 18
HP PCL 5 Universal Print Driver
included 12
HP PCL 6 Print Driver
features 51
included 12
settings 51
supported operating systems
12
HP Printer Utility for Macintosh
firmware update 130
HP Printer Utility, Macintosh 130
about 125
Device Information 128
Embedded Web Server
access 140
File Upload 128
Network Settings 138
Supplies Management 132
trays configuration 135
Upload Fonts 129
HP PS Universal Print Driver
included 12
HP PS Universal Print Driver and
PCL Universal Print Driver
supported operating systems
12
HP Utility, Macintosh
Supplies Status 127
HP Web Jetadmin 23
I
Incompatible Print Settings
messages. See constraint
messages
information pages
HP Embedded Web Server 19
installation
component languages 8
connection type, network 35
connection type, USB 33
dialog boxes, Mac OS X 112
File to E-mail utility 143
Macintosh printing-system
software 111
options 29
system requirements for
Macintosh 109
troubleshooting Macintosh
123
Internet Explorer, versions
supported
HP Embedded Web Server 18
J
Jetadmin, HP Web 23
job storage mode
personal job 89
proof and hold 88
L
languages
CD 3
driver 7
installer component 8
Linux OS
driver availability 27
localized CD 3
M
Mac
driver settings 109
removing software 124
Macintosh
hardware requirements 109
software components 110
supported operating systems
109
Macintosh OS
Device Information 128
dialog boxes, Mac OS X
printing-system software
installation 112
directory structure, software
CD 111
File Upload command 128
firmware upgrades 130
fonts supported 110
HP EWS 110
HP Printer Utility 125
network settings 138
network setup 111
online help 110
PDEs 110
printing-system software
installation 111
Supplies Management 132
ENWW
supplies status 127
trays configuration 135
troubleshooting setup 123
Upload Fonts 129
media
supported sizes 64
memory
Macintosh requirements 109
messages, constraint
print drivers 54
Microsoft Windows
installation options 29
mopy 103
multiple-original print. See mopy
N
Netscape Navigator, versions
supported
HP embedded Web Server 18
network settings
HP Embedded Web Server 22
networks
HP Driver Configuration 16
HP Web Jetadmin 23
Macintosh settings 138
Macintosh setup 111
O
operating systems
supported 26
OS. See operating systems
other links list
HP Embedded Web Server 22
P
paper
adding custom types 68
Alternative Letterhead Mode
57
custom sizes 66
duplex binding settings, print
drivers 83
orientation 85
settings, print drivers 62
source commands 142
source setting 67
supported sizes 64
type commands 142
type setting 67
types and sizes supported 142
ENWW
paper sizes
supported 64
PDEs (Printer Dialog Extensions)
110
PDF files
Macintosh, File Upload
command 128
personal job option
job storage 89
PIN
Make Job Private/Secure
setting 90
Personal Job setting 89
PPDs, Macintosh
troubleshooting 123
preview image 53
print driver
supported operating systems
12
print drivers
About tab contents 105
Advanced Printing Features
settings, print drivers 57
Advanced tab content 55
Allow Manual Duplexing
setting, Device Settings tab
102
Alternative Letterhead Mode,
Advanced tab 57
Automatic Configuration setting,
Device Settings tab 101
Booklet Layout settings, Finishing
tab 83
collation settings 103
Copy Count settings, Advanced
tab 56
device services, Services tab
96
Device Settings tab content 97
Document Options setting,
Advanced tab 56
Document Options settings,
Finishing tab 79
document preview image 70,
74, 85
duplex unit, Device Settings
tab 102
Effects tab content 72
Finishing tab contents 79
Flip Pages Up setting, Finishing
tab 83
Font Substitution Table settings,
Device Settings tab 98
Form to Tray Assignment setting,
Device Settings tab 97
Graphic setting, Advanced
tab 56
Help system 54
incompatible print settings
messages 54
installable options, Device
Settings tab 100
Internet Services options,
Services tab 96
job name settings, Job Storage
tab 92
Job Separator setting, Device
Settings tab 103
Job Storage Mode settings, Job
Storage tab 88
job storage settings, Job Storage
tab 93
Job Storage tab contents 86
Layout Options setting,
Advanced tab 58
Macintosh 110
Make Job Private/Secure
setting, Job Storage tab 90
mopier mode, Device Settings
tab 103
Orientation settings, Finishing
tab 85
Page Order settings, Finishing
tab 84
Pages per Sheet setting,
Finishing tab 84
Paper Options settings, Paper/
Quality tab 62
paper source commands 142
Paper source setting, Paper/
Quality tab 67
paper supported 142
paper type commands 142
Paper type setting, Paper/
Quality tab 67
Paper/Output settings,
Advanced tab 55
Paper/Quality tab contents 61
Index
147
Personal Job setting, Job
Storage tab 89
Print All Text as Black setting,
Advanced tab 57
Print on Both Sides settings,
Finishing tab 80
Print Optimizations setting,
Advanced tab 57
Print Quality settings, Paper/
Quality tab 71
Printer Features setting,
Advanced tab 57
printer hard disk, Device
Settings tab 102
Printer Status Notification,
Device Settings Tab 101
Printing Shortcuts tab contents
59
Proof and Hold setting, Job
Storage tab 88
Quick Copy setting, Job Storage
tab 89
Resizing Options settings, Effects
tab 73
Send True Type as Bitmap
setting, Advanced tab 57
Services tab content 95
status message, Job Storage
tab 88
Stored Job setting, Job Storage
tab 90
tray 3, Device Settings tab
101
True Type font settings,
Advanced tab 56
uninstall, Add/Remove
Programs 48
uninstall, Server Properties 50
user name settings, Job Storage
tab 91
version numbers 12
Watermarks settings, Effects
tab 75
What's this? Help 54
print job
delete stored job 94
hard disk, job storage 102
job name settings 92
job separator 103
job storage 102
148
Index
Personal Job setting 89
Proof and Hold setting 88
Quick Copy setting 89
release stored job 93
Secure Printing 102
Stored Job setting 90
user name 91
print on both sides 80
automatically 81
manually 81
Tray 3 102
print tab
HP Embedded Web Server 21
Printer Dialog Extensions (PDEs)
110
printer drivers (Mac)
changing settings 109
Printer Status Notification 101
Printing preferences tab set 53
printing-system software
availability 2
installation, Macintosh 111
requirements 26
printing-system software, install
license agreement 32
printing-system software, uninstall
Add/Remove Programs 48
Server Properties 50
proof and hold 88
Properties tab
53
R
regional versions, CD 3
remote firmware updates
Macintosh 130
removing Mac software 124
S
Scan Driver
Windows 10
secuity settings
HP Embedded Web Server 21
settings
drivers (Mac) 109
software
uninstalling 43
uninstalling Mac 124
software license agreement 32
Special Pages
covers 69
status
Macintosh supplies 127, 132
supplies
Macintosh status 127, 132
supported paper 64
system requirements
HP Embedded Web Server 18
printing-system software 26
T
transparencies, paper type
commands 143
trays
Alternative Letterhead Mode
57
duplex unit 102
Macintosh configuration 135
paper source commands 142
paper type commands 142
specify paper size 97
tray 3 101
troubleshoot
diagnostics 95
troubleshooting
File to E-mail utility 143
Macintosh setup 123
troubleshooting tools
HP Embedded Web Server 21
TWAIN
driver 10
U
uninstall
Windows software 43
uninstalling Mac software 124
Update Now feature 15
steps to activate 15
Upload fonts
Configuration Settings menu
129
V
version numbers
print drivers 12
W
Web browser requirements
HP Embedded Web Server 18
ENWW
Web Jetadmin
configuration 17
Web sites
download software 2
HP Web Jetadmin,
downloading 23
Internet Services options,
Services tab 96
other OS support links 27
WIA driver 10
Windows
components, software 10
drivers supported 10
installation options 29
Windows operating systems
change driver settings 52
Windows OS
directory structure, software
CD 3
driver versions 12
HP PCL 6 Print Driver features
51
supported 26
ENWW
Index
149
150
Index
ENWW
© 2011 Hewlett-Packard Development Company, L.P.
www.hp.com