FUJITSU TWAIN 32 Scanner Driver Scanner Utility for Microsoft

P3PC-E407-02EN
FUJITSU TWAIN 32 Scanner Driver
Scanner Utility for
Microsoft® Windows®
<32bit>
Version 8.10
User's Guide
For Microsoft® Windows® 95 and Windows NT®
Introduction
Thank you for purchasing the "Scanner Utility for Microsoft® Windows® V8.10".
This software contains a TWAIN-compliant image scanner driver (simply called "driver" in this
guide) and utilities.
This guide provides a description summary of the driver, as well as a description of the
installation method and procedures for appropriate use. Please read this guide before starting to
use the software.
In addition, read the README.TXT file on the CD-ROM for the latest information not included
in this manual.
In this guide, product names are abbreviated as follows:
• "Microsoft® Windows® 95 operating system": "Windows® 95"
• "Microsoft® Windows NT® Workstation operating system Version 4.0" and "Microsoft®
Windows NT® Server operating system Version 4.0": "Windows NT® 4.0"
• "Microsoft® Windows®98 operating system": "Windows®98"
• "Microsoft® Windows® 2000 Professional": "Windows® 2000"
• "Microsoft® Windows® Millennium Edition": "Windows® Me"
• "Microsoft® Windows® XP Home": "Windows® XP"
When "Windows® 95," "Windows® 98," "Windows NT® 4.0," "Windows® 2000," "Windows®
Me" and “Windows® XP” are referred to collectively, they are simply referred to as "Windows®".
Unless otherwise indicated, explanations refer to "Windows® 95," "Windows® 98," "Windows
NT® 4.0," "Windows® 2000," "Windows® Me" and "Windows® XP” collectively.
[High Risk Activity]
The Customer acknowledges and agrees that the Product is designed, developed and manufactured as
contemplated for general use, including without limitation, general office use, personal use, household
use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for
use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly
to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"),
including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic
control, mass transport control, medical life support system, missile launch control in weapon system.
The Customer, shall not use the Product without securing the sufficient safety required for the High
Safety Required Use. In addition, PFU shall not be liable against the Customer and/or any third party for
any claims or damages arising in connection with the High Safety Required Use of the Product.
Copyright © PFU LIMITED 2002
Trademarks
MS-DOS, Microsoft, Windows, and Windows NT are registered trademarks of Microsoft
Corporation.
IBM PC/AT and DOS/V are registered trademark of International Business Machine
Corporation.
Adaptec is a registered trademark of Adaptec Inc.
EZ-SCSI is a trademark of Adaptec Inc.
Other product names are the trademarks or registered trademarks of the respective companies.
ii
Organization
This manual explains how to install and use this driver, and how to use the TWAIN scanning
utility.
• TWAIN
This section gives an overview of the TWAIN specification.
• Installation
This section explains the procedure for installing the environments in which this driver may
operate.
• Using the Driver
This section explains how to use the driver.
• Using the Utilities
Use of the following utilities is explained:
−
Using the Gamma Pattern Editor
• Trouble shooting
This section explains the possible causes of error messages and operation errors and the
corresponding recommended actions.
• Appendix
The appendix contains the specifications of image scanners.
iii
Contents
1. Outline...............................................................................................1
1.1 Characteristics of this Driver .......................................................................... 1
1.2 Operating Environment .................................................................................. 1
1.3 Explanatory Notes.......................................................................................... 2
1.4 Explanation of terms ...................................................................................... 3
2. TWAIN ...............................................................................................4
2.1 TWAIN ........................................................................................................... 4
2.2 TWAIN Application ......................................................................................... 4
3. Installation ........................................................................................6
3.1 Preparation .................................................................................................... 6
3.2 Starting Installation ........................................................................................ 9
3.3 Uninstall ....................................................................................................... 10
4. Using the Driver .............................................................................11
4.1 Selecting the Driver...................................................................................... 11
4.2 Screen Configuration ................................................................................... 12
4.3 Displaying Driver Information ....................................................................... 13
4.4 Setting Information on Image Scanning ....................................................... 14
4.5 Specifying Driver Operation ......................................................................... 21
4.6 Setting "Scanning Area"............................................................................... 23
4.7 Setting Options ............................................................................................ 24
4.7.1 Rotation ............................................................................................................... 25
4.7.2 Job/Cache........................................................................................................... 28
4.7.3 Generic................................................................................................................ 32
4.7.4 Imprinter (Endorser) ............................................................................................ 33
4.7.5 Start Up ............................................................................................................... 37
4.7.6 Filter .................................................................................................................... 40
iv
4.8 Setting Advance Options.............................................................................. 42
4.8.1 Gray..................................................................................................................... 43
4.8.2 Image Filter ......................................................................................................... 46
4.8.3 DTC ..................................................................................................................... 48
4.8.4 When Color is specified....................................................................................... 51
4.9 Setting the Configuration Options................................................................. 55
4.10 Basic Scan Dialog ..................................................................................... 58
4.11 Download Pattern File ............................................................................... 60
5. Using the Gamma Pattern Editor..................................................64
5.1 Start-up ........................................................................................................ 64
5.2 [File] menu ................................................................................................... 65
5.3 [Help] menu.................................................................................................. 66
5.4 Gamma Pattern Editing................................................................................ 67
6. How to Use the FUJITSU Scanner Control Center......................68
6.1 Outline.......................................................................................................... 68
6.2 How to Start the FUJITSU Scanner Control Center ..................................... 68
6.3 Pop-up Menu ............................................................................................... 69
7. Using the Firmware Updater .........................................................76
8. Troubleshooting.............................................................................78
8.1 Error Messages............................................................................................ 78
8.1.1 Messages from the TWAIN Driver ...................................................................... 78
8.1.2 Error messages relating to gamma correction pattern editing ............................ 87
8.1.3 Messages concerning to FUJITSU Scanner Control Center .............................. 88
8.1.4. Messages relating to the Firmware Updater ...................................................... 90
8.2 Device Trouble Related to Operation ........................................................... 92
9. Appendix.........................................................................................93
9.1 Relevant Image Scanner Specification ........................................................ 93
9.2 Maintenance Service.................................................................................. 126
v
1. Outline
1.1 Characteristics of this Driver
• This driver complies with TWAIN regulations V1.9 (the latest version as of March 2002),
which are global standards for image scanners. The driver can be used in all TWAINcompliant applications.
• This driver also supports an image scanner that has the "double-sided scan" function. If the
application supports continuous scan, a double-sided document can be scanned.
1.2 Operating Environment
This driver can be used in the following systems:
• An IBM PC/AT compatible machine (recommended: Intel Pentium 100MHz or higher) on
which one of the following operating systems are installed
−
Microsoft® Windows® 95
−
Microsoft® Windows® 98
−
Microsoft® Windows® Me
−
−
Microsoft® Windows NT® Server Version 4.0 (Installation of Service Pack 3 or later
recommended)
Microsoft® Windows NT® Workstation Version 4.0 (Installation of Service Pack 3 or
later recommended)
−
Microsoft® Windows® 2000 Professional
−
Microsoft® Windows® XP
®
(*We recommend FUJITSU TWAIN32 Version 9.8 for Windows 98, Me, 2000 or XP)
• Adaptec® SCSI adapter or Fujitsu FMV SCSI adapter
−
In some cases, the driver may not operate with the above systems. Please check in
advance with your place of purchase.
−
Notes are provided on the accepted SCSI adapters in README.TXT, which is included
in the installation media. Please read these notes before use.
• Adaptec® EZ-SCSI Pro Version 4.5 or later or the following 32-bit versions of ASPI
Manager (included, for example, in the Adaptec SCSI installer for Windows® 95/Windows
NT® or on Fujitsu SCSI driver disk V1.2):
TM
Windows® 95, Windows® 98, Windows NT® 4.0
V4.01 or later
Windows® 2000, Windows® Me
V4.60 or later
®
V4.70 or later
Windows XP
• RAM of 32 megabytes or more (64MB or above is recommended)
• Free hard disk space of 10 megabyte or more (Except the range for the Image storing.)
• CD-ROM drive (required for installation)
• Mouse (recommended)
1
1.3 Explanatory Notes
The descriptions in this manual are prepared based on the following rules:
◊
Menus and buttons
The menus and buttons used in the program description are enclosed in [ ].
Example: [File] menu, [OK] button
◊
Keyboard
The keytop indications comply with the standard keyboard of the Fujitsu FMV series.
Major differences between the Fujitsu FMV keyboard and other keyboards are shown below.
FMV keytops
Other possible keytops
Alt
◊
Previous screen, GRPH
Ctrl
CTRL
Esc
ESC
Enter
Return,
Shift
SHIFT
Back space
Backspace, BS
F1
PF1, f-1
Terms related to mouse operation
Terms related to major mouse operations are explained below.
Click:
To press and release the mouse button
Double click: To quickly press the mouse button twice
Drag:
◊
Move the mouse while keeping the mouse button pressed
Notes on operation procedures
If some menus need to be operated in a certain order, the procedural order is described as
follows:
[A] - [B] - [C]
In accordance with this description, operation [A] is executed first, followed by [B] and [C]
in that order.
◊
Figures
Figures and screen operations in this guide refer to Microsoft® Windows® 2000. They are
also followed when using other operating systems.
Note that the expressions may vary with the type of scanner connected.
2
1.4 Explanation of terms
◊
IPC option board
IPC-2/2D in this guide refers to the IPC-2 and IPC-2D image processing circuit.
IPC-3/3D in this guide refers to the IPC-3 and IPC-3D option board.
IPC-4D in this guide refers to the IPC-4D option board.
3
2. TWAIN
2.1 TWAIN
TWAIN is the specification that defines the standard software protocol and application
programming interface (API) for data exchange between a software application program and an
image input device such as the image scanner.
[TWAIN development background]
In the past, development of a new scanner inevitably required the development of a compatible
driver and a sample (demonstration) program exclusively designed for the new scanner. As the
scanner is upgraded, the driver may need to be upgraded as well to maintain its compatibility
with the upgraded scanner. Therefore, the use is most likely to be restricted to one specific
scanner model to avoid the complication of learning new operation methods and replacing the
peripheral driver, etc., involved in scanner replacement.
In view of the incompatibility among different scanners and peripheral equipment and the
accompanying inconvenience, there was a demand for standardization of the related hardware
and software, and TWAIN was established as a result.
The user may now choose among all the input devices and software (driver or application
programs) conforming to the TWAIN standard, and configure a most suitable system for himself,
without being restricted to the products of a certain series or a certain manufacturer.
2.2 TWAIN Application
TWAIN mainly applies to the following three software components:
Application software
Source manager
Source
The components are related to each other as shown below.
4
Application software
(photo retouching software, etc)
Source manager
(TWAIN.DLL/TWAIN_32.DLL, etc)
Source
(Image scanner control of the driver, etc)
Image scanner, etc.
Figure TWAIN Application
5
3. Installation
3.1 Preparation
1. Check that the operating system is installed correctly.
2. Check that the SCSI adapter is installed to the computer.
3. Check whether the SCSI driver and ASPI manager are installed correctly and operating.
Note
Version 4.01 or later of the ASPI Manager is required (For Windows® 2000 or Windows®
Me, ASPI manager must be version 4.60 or later; For Windows® XP, ASPI manager must
be version 4.70 or later). Use Explorer or a similar program to check the version number
of the WNASPI32.DLL file.
4. If the previous version was installed, first confirm that it has been uninstalled (deleted).
5. Confirm that there is sufficient free space on the hard disk to install the software.
Precautions before installation
®
®
®
®
®
In case of Windows 95 / Windows 98 / Windows Me / Windows 2000 / Windows XP
When starting the Operating System (OS), the scanner is recognized by the OS automatically
and the “Update Device Driver Wizard” window appears.
Device driver installation is not needed in this case.
Please follow the procedure below to [Finish] the wizard without installation.
Then the scanner is registered to the Device Manager as “Other devices”.
1. When starting the OS, the scanner is recognized automatically and the following window
®
appears. Please click [Next>]. (If you use Windows 95, please proceed to procedure 4.)
(*Windows® 95)
6
®
®
2. If you use Windows Me or Windows XP, this window requests you to select the search
method (installation method). Please select the correct method as follows and click [Next>].
®
- Windows Me
Please select “Specify the location of the driver (Advanced)”.
®
- Windows XP
Please select “Install from a list or specific location (Advanced)”.
®
®
If you use Windows 98 or Windows 2000, please click [Next>] to find the window which
requests you to select the search method (installation method). Then please select the correct
method as follows and click [Next>].
®
- Windows 98
Please select “Search for the best driver for your device (Recommended)”.
®
- Windows 2000
Please select “Search for a suitable driver for my device (recommended)”.
3. Then the following window appears which asks you about the search locations. Please make
sure that the all check boxes are empty. And then click [Next>] button.
Example: Windows® 98
4. The PC starts to search device drivers.
Finally the PC fails to find the driver and the following window appears.
(*Windows® 95)
7
5. Click [Finish] to finalize the wizard and the scanner is registered to the Device Manager as
“Other devices”.
Notice:
If you click [Cancel], the scanner is not recognized properly and the wizard screen will appear
®
every startup of Windows .
®
We recommend FUJITSU TWAIN32 Version 9.9 for Windows 98, Me, 2000 or XP.
8
3.2 Starting Installation
1. Start Windows®.
Note
A user name with administrator authority must be used to log on to Windows® XP,
Windows® 2000 or Windows NT® 4.0.
Ask the system administrator for the details of logging on.
2. Close any other currently open applications.
3. Insert the setup CD-ROM in the CD-ROM drive. Here, the CD-ROM drive is temporarily
called "D:". (If the environment you are using is different, replace the appropriate parts
below.)
4. Double-click on "install.exe" in the "D: \Driver1\ASPI" folder of the CD-ROM using
Explorer. Then, installation starts.
When an automatic start is specified, the start screen of the setup disk is displayed.
Installation can be started from this screen too.
5. When the setup screen is displayed, continue the process by following the on-screen
instructions.
6. Confirm that the following group is created when setup has been completed. The displayed
icon depends on the selection of "Components" during installation.
Figure Fujitsu TWAIN group
* For the FUJITSU Scanner Control Center, the Gamma Pattern Editor and the Firmware
Updater, see section 6, 5, and 7 respectively.
9
3.3 Uninstall
The uninstall process removes the software and returns the hard disk to its pre-installation state.
1. Click on [Start], followed by [Settings], and then [Control Panel]. The Control Panel is then
displayed.
2. Double-click on "Add/Remove Programs" from the icon list of the Control Panel. The panel
of properties of [Add/Remove Programs] is displayed.
3. Select "Scanner Utility for Microsoft® Windows®" from the "Install/Uninstall" list.
4. Click on the [Add/Remove] button. When the confirmation dialog is displayed, click on
[OK] if you are ready to uninstall.
5. When uninstallation is completed, click on [OK].
Note
Image files that have been scanned and saved will not be deleted.
If other TWAIN-compliant applications and drivers have been installed and you are asked
whether or not to delete files shared with them such as the TWAIN Manager, select [NO]
to avoid deleting them.
10
4. Using the Driver
4.1 Selecting the Driver
To use this driver from the TWAIN application, select "FUJITSU TWAIN32" from the TWAIN
data source (driver) selection screen. For general application, the data source selection screen is
displayed by selecting the [Select Scanner] or [Acquire ...] menu. Refer to the instruction
manual for the application used for details.
11
4.2 Screen Configuration
Figure Main Dialog
The following pages contain the explanation and operation description for each part.
12
4.3 Displaying Driver Information
♦
Image scanner name
The model name, option port name, and capacity of internal scanner memory (in units of
megabytes) of the connected image scanner are displayed.
If no image scanner is connected, this field is blank.
To change the selected scanner, click the [Browse...] button to display a list of connected
scanners and select a scanner from the list.
The type of IPC option board is displayed if an image-processing option board is installed in
the scanner.
IPC-3/3D may not be detected normally, as it is affected by the version number of the
machine type and device. In this case, "IPC2" is displayed.
♦
Preview window
The preview window is used to display the temporary image of read data and for setting the
"Scanning Area."
For settings, see "Scanning Area" later in this manual. Also see the description of the
[Preview] button later in this manual.
♦
Ruler
The large divisions are labeled as "Unit". The scale also varies with the selected scanner.
♦
Message line
The message line is the bottom line of the dialog in which a brief explanation of an input
item or a setting item is displayed when the mouse cursor is moved over the item.
13
♦
Data size
The approximate amount of data per image when data is scanned in the present option.
Note
This value is the amount of uncompressed data. The size of the stored file will differ from
this value and is usually smaller if image compression is chosen and the image is
compressed.
4.4 Setting Information on Image Scanning
♦
Current side
When a scanner that allows duplex scanning is used, specifies the page which sets the image
scanning information.
To scan using the same settings as those for "Front side" and "Back side," clear the checks in
the "Individual Setting" checkbox on the "Front" and "Back" tabs. A single "Duplex" tab
will be displayed at the left so that the same image scanning information can be set for
"Front side" and "Back side."
To scan using different settings for "Front side" and "Back side," check the "Individual
Setting" checkbox on the "Front" and "Back" tabs. Two tabs, "Front" and "Back," will be
displayed at the left. Select each tab and enter the desired settings.
This is only effective when ADF (Duplex) is selected for the method of paper feed. For
scanner types which permit duplex scanning, see "Relevant Image Scanner Specification" in
the Appendix.
♦
Resolution
Specifies the number of pixels (dots) per inch.
Select a fixed resolution from the list or [Custom].
High resolution requires more memory.
The supported resolution depends on the type of scanner and the options installed. See
"Relevant Image Scanner Specification" in the Appendix.
14
♦
Paper Size
Selects a paper size corresponding to the size of the document to be scanned.
Select a standard paper size from the list or [Custom]. If [Custom] is selected, the "Custom
Paper Size Setting" dialog appears. Enter the size of the document to be scanned. (In this
case, specify the paper size by width x length for the scanning direction.)
Some paper sizes may not be accepted by your device. See "Relevant Image Scanner
Specification" in Appendix.
Figure Custom paper size setting dialog
To specify a custom paper size, use the slider or enter the paper size directly. The applicable
unit here is the unit specified under [Option]-[Generic]-[Unit/Scaling].
♦
Scanning Area
Specifies the start position, width and length for the image scan. The maximum allowable
size is the paper size selected previously.
In addition, the minimum size is 1.000 inch, 26 millimeters, or pixels (number of dots per
inch) according to the unit that has been set.
"Left":
The left end of the scan area on the scanned document (X coordinate)
"Top":
The top end of the scan area or the scanned document (Y coordinate)
"Width": The width of the scan area
"Length": The length of the scan area
These values are related to one another in the following way:
0 ≤ left end coordinate < (paper width - minimum scan area size)
0 ≤ top end coordinate < (paper length - minimum scan area size)
Minimum value ≤ width ≤ (paper width - left end coordinate)
Minimum value ≤ length ≤ (paper length - top end coordinate)
15
♦
Scan Type
Selects the feeding device.
The image scanner uses a document bed called the flat bed as well as an automatic document
feeder (ADF) for feeding scanned document. The ADF usually enables the documents to be
scanned only once. The flat bed allows scanning the same documents repeatedly.
Flat bed
Scans a document placed on the flat bed of the device.
ADF (Front Side)
Scans the documents on the device's automatic document feeder (ADF). Here, only the
front sides are scanned.
ADF (Duplex)
To scan both the front and the back of a page, select this option.
If this option is selected, the documents are scanned in the "front to back to front to
back ..." order.
This option can be used only for scanner models that support duplex scanning.
The "Duplex Function" requires that the calling application supports "continuous scan."
If the application does not support "continuous scan," only the data for the front side of
the page is passed to the application.
Some scanner models do not support this option. See "Relevant Image Scanner
Specification" in the Appendix.
Long page (Front Side)
Scans a document longer than the paper size which can be specified by [Paper Size].
In this case, only the front sides of documents are scanned.
When this option is selected, the "Paper Size Setting" dialog box opens. Specify the size
of the document to be scanned.
* While the "Long page" is specified, the preview window cannot be displayed and the
scanning area cannot be specified.
* In case of some scanner models, while the "Long page" is specified, color and grayscale
settings can not be selected in [Image mode].
(Refer to “Relevant Image Scanner Specification” in the Appendix.)
* [Resolution] setting should be set to less than 400 dpi.
* The "Long page" is not displayed in the [Scan Type] dropdown list if not supported by the
device. See "Relevant Image Scanner Specification" in the Appendix.
16
Long page (Duplex)
Scans a document longer than the paper size which can be specified by [Paper Size].
If this option is selected, the documents are scanned in the "front to back to front to
back…" order.
ADF (Back Side)
Scans the documents on the device's automatic document feeder (ADF).
Here, only the back sides are scanned.
Note
To specify duplex scanning, the number of copies designated should be based on the
number of pages, not the number of paper sheets. In other words, one original with a front
and back is regarded as two pages.
♦
Image Mode
Selects an image mode for scanning the image.
Select a corresponding image mode from the list.
Black & White
Scans data by using the fixed threshold binary, black-and-white. Distinguishes black
from white by the setting in the "Threshold" of "Scanning Parameter." This scanning
mode is suitable for scanning line drawings and text documents.
Halftone (Dither)
Scans data using the halftone processing, with dithering or error diffusion. Uses the
patterns set in "Halftone" to simulate data in black-and-white. Selection of built-in
dithered patterns or error diffusion (not supported by some device models) is allowed.
This scanning mode is suitable for scanning images containing light and shadow such as
a photograph.
Gray scale
Scans data using 256-level monochrome gray scale. Light and shade in photographs can
be represented with greater fidelity. This scanning mode employs far more memory
than the Black & White mode.
Some versions of the scanner do not support this scanning mode. For details contact the
retail store where the device was purchased.
Automatic separation
This option specifies whether to distinguish line drawing from photograph image during
scanning.
If this option is selected, the line drawing part is scanned using "Black & White," and
the photograph part is scanned using "halftone". This information is most suitable for
documents containing both photographs, and line drawings or text.
17
SEE (Selectable edge enhancement)
Line drawing and photograph image are scanned using "halftone." Then, only line
drawing part is highlighted.
This scanning mode is suitable for emphasizing only characters in the documents that
consists of characters and photographs.
Depending on the model of the scanner, this function may not be supported. For details,
refer to "Relevant Image Scanner Specification" in Section 9, Appendix.
24bit Color
Scans data using 24 bits color. This mode is suitable for scanning color photograph and
employs far more memory that Gray scale mode.
Only color scanner models support this option. See "Relevant Image Scanner
Specification" in the Appendix.
256 Color
Scans data using 256 colors.
Data size is smaller than "24 bit Color" selected.
Please note that the image quality of "256 Color (8 bit)" is inferior to the case of "24 bit
Color ". Choose "24 bit Color" for higher quality.
Only color scanner models support this option. See "Relevant Image Scanner
Specification" in the Appendix.
8 Color
Scans data using 8 colors.
Data size is smaller than “256 Color” selected.
Please note that the image quality of "8 Color" is inferior to the case of "24 bit Color"
and "256 Color (8 bit)". Choose "24 bit Color" for higher quality.
Only color scanner models support this option. See "Relevant Image Scanner
Specification" in the Appendix.
♦
Black & White
Specifies the processing method when "Black & White" is specified in "Image Mode".
Static Threshold
Executes simple binary processing based on the "Threshold" setting.
SDTC, DTC mode
To enable the auto binary function of the image scanner, specify this option.
If this option is selected, the "Threshold" setting will be disabled.
In addition, auto binary has two modes: "SDTC Mode" and "DTC Mode." These
modes can be set using the "Advance" dialog box.
18
"DTC Mode", however, is limited to the image processing options. Therefore, only
scanner models that have image processing options support "DTC Mode." See
"Relevant Image Scanner Specification" in the Appendix.
SDTC mode (Floating Slice)
This option enables scanning and fine binary processing for documents whose
backgrounds are other than white such as newspapers.
Some scanner models do not support this option. See "Image Scanner Specification" in
Appendix.
♦
Halftone
Selects the halftone pattern for halftone scanning from the built- in pattern list.
Select the desired halftone pattern for displaying the obtained image. This setting is
effective when "Halftone" or "Automatic Separation" is selected in "Image Mode".
Dither Pattern 0
Executes pattern processing that is suitable for scanning a dark photograph.
Dither Pattern 1
Executes pattern processing that is suitable for scanning a dark-colored document
containing both text and photographs.
Dither Pattern 2
Executes pattern processing that is suitable for scanning a light photograph.
Dither Pattern 3
Executes pattern processing that is suitable for scanning a light-colored document
containing both text and photographs.
Download Pattern
Executes processing using the dithered download pattern specified in the dithered
download file (described later). Some scanner models do not support this function. See
"Image Scanner Specification" in Appendix.
Error Diffusion
Error Diffusion minimizes the difference between the pixel density of the scanned image
and the pixel density of the printed image to create better reproduction of a scanned
photograph.
Some scanner models do not support this function. See "Relevant Image Scanner
Specification" in Appendix.
19
♦
Scanning Parameters
For fine scan adjustments.
Since there is no fixed set of values, set by trial and error.
♦ Brightness:
Sets the brightness of the overall image.
Specify the brightness with a number in the range of 1 (bright) to 255 (dark).
To brighten the overall image, decrease the value of the setting. To darken the overall
image, increase the value.
This parameter can be set if "Halftone" or "Automatic Separation" is selected for "Image
Mode."
♦ Threshold:
Sets the threshold value by which the black and the white of black-and-white images are
distinguished. Specify a number in the range of 1 (bright) to 255 (dark). This parameter
can be set only if "Black & White" is specified for "Image Mode."
In addition, if "Auto Binary" is selected, the scanner will automatically use the
appropriate threshold value. As a result, the set value cannot be changed.
In addition, if "Auto Binary" is selected, the scanner will automatically use the
appropriate threshold value. As a result, the set value cannot be changed.
If the light color in the scanned document is read as white, increase the threshold value.
To eliminate light- colored areas in the scanned document, decrease this value.
♦ Contrast:
Sets the contrast of light and shadow in a scanned image.
Specify the contrast with a number in the range of 1 (low [soft]) to 255 (high [sharp]).
The contrast can be set if "Gray Scale" is selected in "Image Mode."
If this value is increased, the dark part of the image is shown darker and the light part is
shown lighter.
Some scanner models do not support this function. See "Relevant Image Scanner
Specification" in Appendix.
20
4.5 Specifying Driver Operation
♦
[Preview]
Reads in a preliminary image based on set values, and displays the image in the preview
window.
Before actual scanning, the preview function can be used to display the entire document for
specifying the desired scan area.
This function is available only on devices that support the use of a flat bed. Some models do
not support this function. See "Relevant Image Scanner Specification".
♦
[Scan]
Scans the specified scan range based on set values.
The following "progress indicator" is displayed during scanning to show the progress of the
scan operation. To stop scanning, click the [Cancel] button.
The character string indicates the data transfer mode used between the driver and the
application.
Progress indicator
♦
[Close] / [OK]
Closes the dialog box without scanning.
If a setting is changed, the changed setting is saved in the initial value file.
♦
[Reset]
Restores the current setting values to the status immediately after the window is opened.
21
♦
[Help]
Displays online help. When the [F1] key is pressed, help information regarding the item on
which the cursor is placed is displayed.
Note
Depending on the application used help information may not be displayable with the [F1]
key. This is because the driver operation is controlled through the application and the [F1]
key may be used differently in each application program.
Help information can be displayed by pressing the [F1] key while holding down the [Ctrl]
or [Shift] key.
♦
[Option]
Displays the "option dialog" for setting device-specific functions. See Section 4.7, "Setting
Option" described later.
♦
[Advance]
Displays the "advance dialog " for settings related to color variance and image processing.
♦
[Config]
Displays the "basic scan dialog" for managing the settings file and for setting simple scan
dialog switching.
♦
[About]
Express the version of this driver by clicking this button.
22
4.6 Setting "Scanning Area"
Specify the scan area in the preview window as follows:
Setting:
1. Press the left mouse button to specify the origin (top left corner) of the scanning area.
(The cursor appears as a "+".)
2. Drag the mouse to show the outline of the scanning area. (As the cursor moves, a range
frame is shown.)
3. Release the left mouse button again to set the range (bottom right corner) of the scanning
area.
Movement:
1. Move the cursor into the range frame. (The cursor appears as a hand.)
2. Press the left mouse button. (The cursor changes to a fist.)
3. Drag the mouse to move the range frame.
4. Release the left mouse button to set the current range.
Cancellation:
The range frame can be canceled by either of the following ways:
Click the left mouse button outside the range frame (inside the scan document).
Select other paper types.
23
4.7 Setting Options
The "option dialog" is used to set device-specific functions and the items that differ depending
on whether the scanner used supports them.
The option specification is divided into "Rotation", "Job/Cache", "Generic", "Imprinter
(Endorser)", "Start Up" and “Filter”.
The supported options depend on the scanner. See "Relevant Image Scanner Specification" in
the Appendix. (
is displayed for options that cannot be used.)
The option dialog in this driver is explained below.
The commonly used buttons are explained first.
♦
[OK]
Enables the new setting, and terminates the option dialog box.
♦
[Cancel]
Disables the new setting, returns the setting to the previous value, and terminates the
processing.
♦
[Help]
Displays online help.
24
The options are described below:
4.7.1 Rotation
Figure Option dialog (Rotation)
♦
Flip Side Rotation
Specifies the binding of the document when both sides are scanned using ADF.
Book
Outputs the scanned image for both sides as is.
Select this option to scan documents bound on the left or right side.
Fanfold
Outputs the scanned image of the backside rotated 180 degrees.
Select this option to scan documents bound on the top or bottom (Front side and
backside are printed conversely.)
* When scanning from the top to bottom for the printing direction of the document, this
setting outputs the image with the front and backsides printed in the same direction.
25
♦
Rotation Degree
Outputs the scanned image rotated to the right or left 90 degrees.
0.0 degree
Outputs the scanned image as is.
90.0 degree
Outputs the scanned image rotated 90 degrees to the right (clockwise).
-90.0 degree
Outputs the scanned image rotated 90 degrees to the left (counterclockwise).
180.0 degree
Outputs the scanned image rotated 180 degrees (top and bottom reversed).
♦
Automatic Size and Skew detection
Disable
This option outputs the image as it was scanned.
End of Page Detection
Scanning with the ADF and page length detection selected will output data for the page
size detected.
The image data output will adjust to the page length detected for each page including
smaller size pages.
Data cannot be output for page sizes greater than the length setup in [Page Size].
This function does not work properly for some applications.
Automatic Deskew
When scanning with the ADF, this option detects skew of the document being fed and
automatically corrects the skew.
Automatic Page Size Detection
Scanning with the ADF and Automatic Page Size Detection selected, the output will
adjust to the page size detected.
Document skew can be detected and can be corrected for the output image.
Output data size will be equal to each document scanned in a multi page scan. When
page size is detected incorrectly, set up the [Page size] to the largest size page in the set.
For example, With Automatic Page Size Detection is selected, it also need to select a
Paper Size (example: Double Letter 11"x17") in the set. If any paper size within the
selected (Double Letter) paper size range is used for scanning, the output will adjust to
the page size detected.
26
However, some detection cannot be corrected for example, an unfixed long image,
folded corner, document has uneven width for the length of the page.
This function becomes effective only when scanning with the ADF.
(It may detect incorrectly when this function is chosen with flat bed scanning.)
This function does not work properly for some applications.
Black Background
If it is selected, the outside of document paper becomes black by using black
background during scanning.
This option may not be supported for some scanners. See "Relevant Image Scanner
Specification" in the Appendix.
♦
Priority
Setup for speed versus automatic document size detection.
Select a small value when scanning speed is the higher priority.
Select a large value when document detection accuracy is the higher priority.
Priority can only be setup when [Automatic Page Size Detection] is selected at [Automatic
Size and Skew Detection].
27
4.7.2 Job/Cache
Figure Option dialog (Job/Cache)
♦
Caching
Specifies whether to pre-read (cache) when a document is scanned. This option enables
faster scanning.
If processing of the application being used slows down and scanning stops, this option can
be used to prevent degradation of the scanning speed. (The effect, however, depends on the
environment being used.)
None
Caching is not performed.
Read ahead
One document page is scanned, and the data is pre-read and stored in PC memory (main
memory of the personal computer).
Ram cache
Pre-reads the allowable amount based on the allocated memory size and stores the data
in PC memory.
A memory size between 1 and 200 MB can be set.
28
Use Memory on Scanner
Pre-reads using the memory installed in the scanner (displayed only if supported by the
scanner).
Use Both Memory
Pre-reads using memory of both Scanner and PC (displayed only if supported by the
scanner).
♦
Batch Detection
The application can detect documents on a specific type of form (special paper). The
application must support this function.
None
No detection. Scanning is done without change.
Include and Continue
After the special paper is detected, scanning continues. The data on the special paper is
also valid.
Include and Stop
After the special paper is detected, scanning stops. The data on the special paper is also
valid.
Exclude and Continue
After the special paper is detected, scanning continues. The data on the special paper is
excluded and will not be transferred to the application.
Exclude and Stop
After the special paper is detected, scanning stops. The data on the special paper is
excluded and will not be transferred to the application.
*Batch Detection can not be used with following Caching, “Use Memory on Scanner” or
“Use Both Memory”.
♦
Double Feed Detection
This option detects a double feed (occurs when two or more documents are sent) based on
the set condition.
If a double feed is detected when this setting has been turned on, the device will stop and an
error message output.
None
Double feed detection is not performed.
Hardware Setting
A double feed is detected based on the device setting.
29
Check thickness
The thickness of the transmitted document is checked by the sensor in the device. A
double feed is detected by detecting changes in the thickness when more than one
document is sent.
Check length
The length of the transmitted document is checked by the sensor in the device. A double
feed is detected by detecting changes in the length when more than one document is sent.
Check thickness and length
The thickness and length of the transmitted document are checked.
The detection accuracy can be improved by using [Check thickness] for continuous scanning
of forms that have different lengths and [Check length] for scanning of forms that have
different thicknesses.
♦
Pre-Pick
It specifies whether a document is picked and carried in front of the scanning position before
starting scanning operation at the ADF scanning.
Disable
Pre-Pick is not performed.
A document is picked and carried in front of the scanning position, after starting scanning
operation.
Enable
Pre-Pick is performed.
A document is picked and carried in front of the scanning position, before starting scanning
operation.
Panel setting
The setting of device is followed.
* When selecting “Enable,” you can scan faster than when selecting “Disable,” because of
Pre-Pick process.
When selecting “Enable,” if you cancel during the ADF scanning, a document remains in
the scanner in the Pre-Pick status.
♦
Check Over-skew
The skew of the transmitted document is supervised during the ADF scanning.
When an over-skew is detected, the scanner is stopped and an error message is displayed.
* This functions, only when “Double Feed Detection” is enabled.
30
♦
Blank page skip
This option skips blank pages (blank pages or completely black pages) during ADF
continuous scanning.
For blank pages, use the [White Dots Ratio] slider to set the skip condition. For black pages,
use the [Black Dots Ratio] slider to set the skip condition.
The value displayed to the right of the slider displays the garbage ratio(*1). If a scanned
document is below this value, it is recognized as a blank page. The setting range is OFF(- -)
and 0.2% to 3.0% (in increments of 0.2%).
<If blank page skip does not operate properly>
−
If a blank page is scanned, increase the value set.
−
If scanning is skipped up to the required document, decrease the value set.
This function can be used if “Ram cache” or “Use Both Memory” is selected.
*1: Ratio of black dots included in the scanning area (for blank pages)
* When “Black Background” is selected in [Automatic Size and Skew detection], the Blank
page skip may not operate properly.
When Scanned image has many background noises, the Blank page skip may not operate
properly.
31
4.7.3 Generic
Figure Option dialog (Generic)
♦
Unit/Scaling
This option selects the unit for the scanning area and preview window. One inch is
calculated as 25.4 millimeters. When inches are converted to millimeters, values are
rounded off.
Note
The TWAIN specifications require that the data width be arranged in units of 32 bits. As a
result, a difference of up to 31 dots can be included, depending on the value set.
32
4.7.4 Imprinter (Endorser)
Figure Option dialog (Imprinter)
♦
Enable Imprinter (Endorser)
Specifies enabling or disabling the imprinter function of the device.
When the option is selected, the scanned documents are imprinted according to the
instructions below. This applies only to the imprinter option. Therefore, the function is
supported only with the scanner which supports imprinter option(s). See "Relevant Image
Scanner Specification" described in the Appendix.
Disable
Imprinting is not performed.
Enable
Prints on documents using imprinter by the settings below.
In this case, it prints on the back side of documents after scanning.
Therefore, the printing is not included in a scanning result.
Depending on scanners, two imprinters can be installed and one of them can be selected to
use.
In this case, "Enable" is displayed as follows.
Pre-Imprinter (Printing before scanning, and on the front side of documents)
Prints on documents using the imprinter installed in front part of the scanner.
33
In this case, it prints on the front side of documents before scanning.
Therefore, the printing can be included in a scanning result.
Post-Imprinter (Printing after scanning, and on the back side of documents)
Prints on documents using the imprinter installed in rear part of the scanner.
In this case, it prints on the back side of documents after scanning.
Therefore, the printing is not included in a scanning result.
* [Pre-Imprinter] and [Post-imprinter] cannot be used at the same time.
♦
Y Offset (Printing)
Specifies Y Offset from the edge of the original for the placement of printing. See "Relevant
Image Scanner Specification" in the Appendix because the standard value specified here
depends on the device.
♦
Direction (Printing)
Specifies the printing direction of endorsement strings. When printing from the head of
strings against to the direction of scanning, designate “Top to Bottom”. And when printing
from the tail of strings against to the direction of scanning, designate “Bottom to Top”
However, see the “Relevant Image Scanner Specification” described in the Appendix since
the available settings depend on the device.
♦
Initial Value (Counter)
Designates the initial count when the Imprinter String is set, including a counter value. See
the "Relevant Image Scanner Specification" described in the Appendix since the
programmable values range depends on the device.
♦
Counter Step (Counter)
Designates the counter increment of the set counter values. In other words, this value is
added to or subtracted from the counter each time one original is scanned.
An increment of 0, 1, or 2 may be specified. Usually, 1 is designated for a single-sided
original, and 2 for a double- sided original.
34
♦
Counter (Counter)
Designates whether to increase or decrease the specified step value.
♦
Imprinter String (Endorser)
Specifies the imprinter string.
The following characters can be outputted by the Imprinter.
Alphabet Letters
: A-Z, a-z
Numeric Characters
: 0, 1-9
Symbols
: !”#$%&’()*+,-./:;<=>?@[\]^_`{|}~
Other
: (Space)
(*The space is ignored when it is entered at the head of [String:].)
The following definitions can be used. They may also be selected from the menu, which is
displayed by clicking on "
".
%YYYY: The year is printed in four digits using the Western calendar.
%YYY: The year is printed using the two digits of the Japanese calendar (current, or Heisei
era).
%YY:
The year is printed in the last two digits of the Western calendar.
%MMM: An English abbreviation of the month is printed; for example, JAN for January
and FEB for February.
%MM:
The month is printed in two digits; for example, 01 for January and 12 for
December.
%M:
The month is printed using one or two digits; for example, 1 for January and 12
for December.
%DD:
The day is printed using two digits; for example, 03 for the 3rd day of the month
and 26 for the 26th day of the month.
%D:
The day is printed using one or two digits; for example, 3 for the 3rd day of the
month and 26 for the 26th day of the month.
%HH:
The hour is printed using two digits of the 24-hour clock; for example, 08 for 8:00
a.m. and 14 for 2:00 p.m.
%H:
The hour is printed using one or two digits of the 24-hour clock; for example, 8 for
8:00 a.m. and 14 for 2:00 p.m.
%NN:
The minute is printed using two digits; for example, 02 for 8:02 a.m. and 48 for
2:48 p.m.
35
%N:
The minute is printed using one or two digits; for example, 2 for 8:02 a.m. and 48
for 2:48 p.m.
%Nud:
A counter value is printed by N digits which increases or decreases with each page.
Programmable digits of the counter is 5 and 8 and described as "%05ud" and
"%08ud" respectively. (See the "Relevant Image Scanner Specification" described
in the Appendix since the programmable digits depend on the device.)
The initial counter and the methods of increasing and decreasing values can be specified as
explained above under the heading "Counter."
This specification is only permitted at the end of an Imprinter String (Endorser).
♦
Sample
Displays printed examples of the Imprinter String (Endorser) designated above.
Note
The printed counter, date, and time do not always look like the sample because the scanning
option takes precedence.
36
4.7.5 Start Up
Set up the Power Mode, Low-Speed Feeding and Scanner Operation Panel.
In some scanner models, displayed dialog box or setup item may be different or even [Startup]
dialog box may be not displayed.
In case of model fi-4110CU / fi-4110C(M3091DC) / fi-4210C(M3092DC)
In case of model fi-4120C / fi-4220C
Figure Option dialog (Start Up)
37
♦
Power Mode
−
Quick Start Mode
This mode keeps the lamp on regardless the scanner’s operating condition, which saves
times for lamp to become steady.
−
Low Power Mode
To save the power consumption, this mode turns the lamp off, if the scanner is not
operated for 14minutes.
♦
Enable Low Speed Feeding
This is to specify to obtain a high quality image.
This function reduces times of start/stop during the scanning to obtain a smooth and high
quality image.
♦
Prefer Scanning Sped
This mode makes scanning speed becomes faster in color/grayscale scanning.
When checking this check box, scanning speed becomes faster, but image quality is slightly
deteriorated.
Check this check box, when giving priority to scanning speed over image quality.
♦
Scanner Operation Panel
−
Enable Scanner Panel
This is to specify whether the operator panel is enabled or not. If this is checked, button
operation on the operator panel becomes effective. (Note that the operator panel is
enabled only during the driver is activating.)
–
Enable Scanner Dial
Specifies whether the value indicated by the density dial on the scanner is reflected on
scanning or not.
This setting is valid when both “Enable Scanner Panel” and this checkbox are checked.
38
With this density dial, the density can be set by five levels.
If moving the density dial to the UP direction, the density changes [Normal] >>[Darker
scanning]>>[Dark scanning]. If moving the density dial to the Down direction, the
density changes [Normal]>>[Lighter scanning]>>[Light scanning]. If the dial is in the
center, the scanning density is [Normal].
−
Enable [Duplex] button
This specifies whether the [Duplex] button (to switch simplex and duplex) on the
scanner operator panel is enabled.
And, it distinguishes whether to scan from the ADF, or from the Flat Bed (FB), and
changes automatically.
If this box is checked,
when a document is on the ADF, scanning is started from the ADF.
And when no document is on the ADF, scanning is started from the FB.
Scanning changes [Simplex] >> [Duplex]>> [Simplex] each time the [Duplex] button is
pressed.
−
ADF/FB Automatic change
It distinguishes whether to scan from the ADF, or from the Flat Bed (FB), and changes
automatically.
When a document is on the ADF, scanning is started from the ADF.
And when no document is on the ADF, scanning is started from the FB.
•
−
Enable [Send to] button
Specifies whether the preview is started by pressing the [Send to] button on the device.
−
Enable ADF Scanning Start
Specifies whether scanning is started by a scanner event.
◊
[Scan] button
Pressing the [Scan] button on the scanner starts scanning.
◊
Document Detection
When paper is detected on the ADF, scanning automatically starts.
39
4.7.6 Filter
Set the filter processing in this dialog.
The filter name is displayed in the list box.
While checking the checkbox in the left of the filter name, the filter processing is applied to
scanned image.
When selecting a filter name and clicking [Property] button, the setting dialog of the filter is
displayed.
Figure Option dialog (Filter)
The type of filter and the setting details are explained below.
40
♦
Page Edge Filler
Eliminates the blemish around the paper edges by covering the area in (Black or White)
color.
−
Color
Select a color to paint over the image frame.
Can select "White" or "Black".
Please specify either white or black to match the background color of the document.
−
Filled Area
•
[Unit]
Select a unit from “Inches”, “Millimeters”, and “Pixels”
•
[Up], [Down], [Left], [Right]
Specify the paint area from each side of the scanned image in numbers.
[Up]
: Input width from the top edge of the image.
[Down] : Input width from the bottom edge of the image.
[Left]
: Input width from the left edge of the image.
[Right] : Input width from the right edge of the image.
Each value should be set in the following ranges.
0 < [Up] + [Down] < [Image Length]
0 < [Left] + [Right] < [Image Width]
If any values are out of these ranges, this function may not work.
41
4.8 Setting Advance Options
The "advance dialog" is used to set items related to image processing. The settings apply to
device-specific functions and items that differ according to whether the scanner used supports
them.
The advance option specification is divided into "Color Variance", "Image Processing", and
"Auto Binary".
The supported options depend on the scanner. See "Relevant Image Scanner Specification" in
the Appendix. (
is displayed for options that cannot be used.)
The option dialog for this driver is explained below.
The commonly used buttons are explained first.
♦
[OK]
Makes the new setting valid and closes the option dialog box.
♦
[Cancel]
Makes the new setting invalid, returns the setting to the previous value, and terminates
processing.
♦
[Help]
Displays online help.
42
The options are described below:
4.8.1 Gray
Figure Advance dialog (density correction)
♦
Gamma Pattern
This option corrects distortions from nonlinear image representation. Scanner sensors are
generally designed to generate output linear to the density of the light reflected from the
document. However, most output terminals do not produce output that has the desired linear
relation to the input, and the resulting distortion must be corrected.
One of the following can be selected as a correction pattern: "Normal", "Soft", "Sharp",
"Download Pattern", or "Custom".
43
When "Download Pattern" is selected, the above dialog box opens.
Select the gamma pattern download file to be used from the list of file names. Then, press
the [OK] button. Correction will then be executed using the selected gamma pattern.
If the gamma pattern download file has not been registered in the list of file names, use the
[Add] button to register the file.
See "Download Pattern File" for information about how to specify the file.
When "Custom" is selected, a custom specification can be entered.
Entering an arbitrary value between 0.1 and 10.0 enables a gamma pattern corresponding to
the entered value to be specified.
♦
White Level Follower
Select this option to scan a document whose background color is not white, such as a
newspaper.
Select "Auto", "Enable", or "Disable".
When "Enable" is selected, the document is scanned using background follow-up (for line
drawings). When "Disable" is selected, the document is scanned using the standard basic
white background (for photographs). When "Auto" is selected, the option automatically
switches to the optimal setting based on the specified "Image Mode".
"White Level Follower" is used to adjust the density of the white background of a document
and correct variations in the background color by compensating the pixels of scanned images
individually.
For ordinary use, set "White Level Follower" to off. Use of "White Level Follower" often
increases the background noise because IPC-3/3D is very sensitive.
This option is not available if "Gray Scale" is selected for "Image Mode".
In addition, some scanner models do not support this option. See "Relevant Image Scanner
Specification" in the Appendix.
44
♦
Dropout Color
This option enables scanning excluding the selected color information of green, red, or blue
(the three primary colors of light). For example, to scan black characters framed in red,
selecting red for scanning will scan only the black characters.
♦
Reverse
This option specifies whether to reverse the black and white of a scanned image.
If this option is selected, black and white are reversed by reversing the black and white
pixels. If this option is not selected, the black and white values of the reproduced image
correspond to the original image.
Some applications do not permit normal operation. If this occurs, contact the manufacturer
of the application.
45
4.8.2 Image Filter
Figure Advance dialog (image processing)
♦
♦
Edge Processing
This option specifies the sharpness of a scanned image.
Select "None", "Edge Extract", or "Smoothing (Background Removal)".
None
Edge processing is not performed.
Edge Extract
This option outputs an image with the edge extracted.
If this option is selected, the boundary between the black part and white part in a closed
area is traced and the edge extracted.
"DTC Variance" and "Edge Extract" are mutually exclusive.
Smoothing
This option smoothes the curves in an image by removing zigzag lines.
Emphasis
This option outputs an image with the edge emphasized.
46
"Emphasis High", "Emphasis Mid", or "Emphasis Low" can be selected.
If "Emphasis High" is selected, the image becomes sharper. If "Emphasis Low" is
selected, the image appears less distinct.
♦
Mirror
This option specifies whether to flip the scanned image over the scanning axis.
If this option is selected, a mirror image of the original image is obtained.
♦
Variance (Simple auto binary)
This option specifies the value for adjusting the dynamic threshold of an image based on the
brightness of the image.
A value is specified using the slider. The smaller the value, the lower the variance becomes.
The higher the value, the higher the variance becomes. To specify the value, drag the tab of
the slider to the desired setting position. The current setting is displayed on the right. This
option is mainly used for optical character recognition (OCR). It enables dark and bright
images in a document to be scanned effectively.
♦
Floating Slice Level (SDTC)
Specifies the level of the binary processing done by the floating slice.
Set the level to higher when scanning documents with dark colored background.
* This is displayed only when the SDTC mode (Floating Slice) is specified.
47
4.8.3 DTC
This option is valid only when "Simple auto binary" is set.
Figure Advance dialog (DTC Mode)
♦
Scan mode
This option selects one of the following two scan modes:
[for OCR]: This mode is for text recognition applications where irregularity in the image is
undesirable.
[for Image]: This mode is for image scanning applications that scan images without prior
smoothing.
The specification changes the specifiable items and members for "Threshold Curve" and
"Gamma Curve".
The selection screens for "for OCR" and "for Image" are not displayed if IPC-3/3D and IPC4D are installed.
48
♦
Density curve
This option specifies the relationship between the threshold value and the maximum density.
This specification method depends on the [Scan mode] setting.
In [for OCR] mode, use the slider to set the inclination and density level. To specify the
value, drag the tab of the slider to the desired setting position. The current setting value is
displayed on the right. (figure on the left)
In [for Image] mode, select [Normal] or [Lightest]. (figure on the right)
If IPC-3/3D and IPC-4D have been installed, there is no difference between [for OCR] and
[for Image]. The slider is used to set the inclination and density level. (The figure on the
right is not displayed.)
♦
Gamma Curve
This option specifies the gamma correction curve pattern.
The available choices depend on the [Scan mode] setting.
In [for OCR] mode, select [OCR1] or [OCR2].
In [for Image] mode, select [Dark Image] or [Even].
For IPC-3/3D and IPC-4D, the gamma curve need not be specified because the contrast is
adjusted automatically. ([Gamma Curve] is not displayed.)
♦
Equal to White
At conversion to binary, this option specifies whether to set the data to black or white when
the threshold value and the value of the scanned data are equal.
When using IPC-4D, this option cannot be selected.
♦
Ball-Point Pen Mode
When an image made with a pencil or ball-point pen is scanned, the light reflected from the
pencil lead or ink is not uniform. As a result, part of the image may be missing. If the [BallPoint Pen] checkbox is checked, filtering is applied to offset the bright area in the document
and compensate for disconnected or faint lines.
49
♦
OCR Smoothing/ Background Removal
The OCR smoothing is the function to make smooth the notched part of line-drawing, and
the Background Removal is the function to remove the uneven background.
These functions are enabled when it is selected.
For further information, please refer to the User’s guide attached to the IPC board since the
function to be operated is different by the type of IPC.
At IPC-3/3D, [Noise Removal] and [OCR smoothing/ Background removal] is enabled
exclusively.
♦
Noise Removal
This option automatically removes spots that appear as black stains in a white area and spots
that appear as white stains in a black area.
This option uses an algorithm that removes particles from 2 x 2 to 5 x 5 dot matrixes. The
size of one dot depends on the resolution setting, and is equivalent to 1/400 inch for 400 dpi.
Particles are distinguished from the text by whether they are connected to other dots within
the specified number of pixels.
At IPC-3/3D, [Noise Removal] and [OCR smoothing/ Background removal] is enabled
exclusively.
Figure Advance dialog (DTC Mode) <IPC-3/3D and IPC-4D installed>
50
4.8.4 When Color is specified
For color devices, if Color is selected in the image type, dialog display changes as follows.
Figure Advance dialog (Color) <Image Mode : Color selected>
♦
Shadow/Highlight
Shadow : The highlight allows the darkest part of the document to be controlled. The higher
the shadow value, the darker the image.
Highlight : The highlight allows the brightest part of the document to be controlled. The
higher the highlight value, the lighter the image.
Any levels on the document outside these settings are flooded (all 0 or 255), while the
interval between the shadow and highlight settings are equally divided into 255 levels,
which are used to create the output images. This means that if the shadow and highlight
settings are close to each other, the contrast for that interval in the scanned document will be
very strong (but with all other areas maximizing high or low).
51
♦
Contrast/Brightness
Contrast : Sets the contrast of light and shadow in a scanned image. Specify the contrast
with a number in the range of 1 (low [soft]) to 255 (high [sharp]). If this value is
increased, the dark part of the image is shown darker and the light part is shown
lighter.
Some scanner models do not support this function. See "Relevant Image Scanner
Specification" in Appendix.
Brightness : Sets the brightness of the overall image. Specify the brightness with a number
in the range of 1 (bright) to 255 (dark). To brighten the overall image, decrease
the value of the setting. To darken the overall image, increase the value.
♦
Gamma
This option corrects distortions from nonlinear image representation. Scanner sensors are
generally designed to generate output linear to the density of the light reflected from the
document. However, most output terminals do not produce output that has the desired linear
relation to the input, and the resulting distortion must be corrected.
An arbitrary range is between 0.1 and 10.0.
♦
Color select
It is possible to select independent value on each color
52
Figure Advance dialog (Quality) <Image Mode : Color selected>
♦
Image Emphasis
This option specifies the sharpness of a scanned image.
Select "None", "De-Screen" or "Emphasis".
None
Edge processing is not performed.
Emphasis
This option outputs an image with the edge emphasized.
"Emphasis High", "Emphasis Mid", or "Emphasis Low" can be selected.
If "Emphasis High" is selected, the image becomes sharper. If "Emphasis Low" is
selected, the image appears less distinct.
53
De-Screen
"De-Screen Level 1", "De-Screen Level 2", "De-Screen Level 3", or "De-Screen Level
4" can be selected.
This option eliminates moirés patterns. To eliminate more effectively, higher level is
selected.
♦
White Level Follower
Select this option to scan a document whose background color is not white, such as a
newspaper.
Select "Auto", "Enable", or "Disable".
When "Enable" is selected, the document is scanned using background follow-up (for line
drawings). When "Disable" is selected, the document is scanned using the standard basic
white background (for photographs). When "Auto" is selected, the option automatically
switches to the optimal setting based on the specified "Image Mode".
"White Level Follower" is used to adjust the density of the white background of a document
and correct variations in the background color by compensating the pixels of scanned images
individually.
♦
Reverse
This option specifies whether to reverse the black and white of a scanned image.
If this option is selected, color data is reversed. If this option is not selected, the color values
of the reproduced image correspond to the original image.
Some applications do not permit normal operation. If this occurs, contact the manufacturer
of the application.
54
4.9 Setting the Configuration Options
These options are used to manage the setting files, and switch the basic scan dialog display.
Press the [Config] button of the main dialog to open the [Configuration] dialog box shown below.
Figure Option dialog box (simplified DTC)
♦
Setting Files
The setting information of the scan conditions can be saved in a “Setting file.”
Scan condition settings that have been set in advance in this dialog can be selected from the
list of setting files. This enables selection of all settings at the same time without having to
button to open the list of setting files.
enter the scan conditions one at a time. Press the
Subsequent scanning operations can be performed effectively by registering several types of
scan conditions that are frequently used.
55
♦
FTS File Information
The information of the setting file selected in [Setting Files] is displayed.
♦
[Show this dialog next open] checkbox
If this checkbox is checked, [Basic Scan Dialog] will be activated the next time the driver is
activated.
♦
[OK] button
Makes the new setting valid, closes this dialog box, and returns to the main dialog.
♦
[Add] button
Adds the setting of the current driver to a setting file.
Pressing the [Add] button opens the [File addition] dialog.
Enter the [Description] and [Filename] as shown in the example above. Then, press the
[OK] button to add the new setting file. To cancel, press the [Cancel] button.
Description: Enter a character string to be displayed in the selection frame of the [Setting
Files].
56
Filename:
♦
Specify the name of the file used to save the settings.
[Delete] button
Deletes unnecessary setting files.
Select the setting file to be deleted and then press the [Delete] button. A confirmation dialog
will be displayed. Press the [OK] button to delete the setting file. To cancel, press the
[Cancel] button.
♦
[Help] button
Displays online help.
57
4.10 Basic Scan Dialog
The basic scan dialog contains only the minimum functions required for scanning. The detailed
setting functions of the main dialog have been omitted.
Scanning can be easily performed by selecting a registered setting file.
The basic scan dialog is also useful for avoiding incorrect operations when standard work is
performed.
By checking the [Show this dialog next open] checkbox of the [Configuration] dialog, the basic
scan dialog box will be opened instead of the main dialog box at the next activation.
<Scan Procedure>
1. Select the file to be used from the list of setting files.
2. Press the [Scan] button.
Scanning is performed based on the settings of the setting file information.
<Configuration>
♦
Setting Files
A list of setting files is displayed. When the desired file is selected, the setting information
saved in the file will be read and reflected during scanning.
58
♦
FTS File Information
The contents of the selected file are displayed.
♦
[Scan] button
Executes scanning based on the contents of the setting file.
♦
[OK] button
Terminates without performing the scan operation.
♦
[Adjust] button
Switches from the basic scan dialog to the main dialog.
♦
[Help] button
Displays online help.
♦
[Show this dialog next open] checkbox
If this checkbox is checked, the [Basic Scan Dialog] will be opened at the next startup. If
this checkbox is not checked, the main dialog will be opened at the next startup.
59
4.11 Download Pattern File
The "download pattern file" of this driver is a file that defines the patterns to be used by the
scanner to execute various image processing. This file is available in the following two versions.
Each version can be selected using the [Download Selection Dialog] that opens when
[Download] is selected.
The file is a text file that conforms to the following rules. Use an appropriate text editing
program (for example, "Note Pad" in the operating system) to edit the file.
♦
Dithered download pattern file
Any user defined dithered pattern can be used to scan an image by downloading the pattern
from the dithered download file to the scanner. The defined pattern becomes effective when
[Download Pattern] is selected for [Halftone].
Some models do not support this file. See "Relevant Image Scanner Specification" in
Appendix.
Although the standard extension of the file name is ".DTH," there may be exceptions.
Coding configuration:
(n, size in the X direction),(m, size in the Y direction),
(pattern value for the X1/Y1 coordinates),
(pattern value for the X1/Y2 coordinates),
(pattern value for the X1/Y2 coordinates),........
(pattern value for the Xn/Ym-2 coordinates),
(pattern value for the Xn/Ym-1 coordinates),
(pattern value for the Xn/Ym coordinates)
Meaning of each element:
(n, size in the X direction) indicates the size of the matrix in the X direction. Specify 8
for the scanner supported by this driver.
(m, size in the Y direction) indicates the size of the matrix in the Y direction. Specify 8
for the scanner supported by this driver.
(Pattern value for the Xx/Yy coordinates) contains a values in the range of 0 (bright) to
255 (dark) that specifies the brightness of the X coordinate, x, and the Y coordinate, y.
Note
Use a delimiter other than a number to delimit elements. For most cases, use a comma (,).
60
Example
8, 8,
128, 128, 128, 128, 128, 128, 128, 128,
255, 128, 128, 128, 128, 128, 128, 128,
255, 255, 128, 128, 128, 128, 128, 128,
255, 255, 255, 128, 128, 128, 128, 128,
255, 255, 255, 255, 128, 128, 128, 128,
255, 255, 255, 255, 255, 128, 128, 128,
255, 255, 255, 255, 255, 255, 128, 128,
255, 255, 255, 255, 255, 255, 255, 128,
61
♦
Gamma download pattern file
Any user defined gamma correction processing can be performed by downloading the
pattern from the gamma download file to the scanner. The defined pattern becomes
effective when [Download Pattern] is selected for [Gamma Pattern].
Some models do not support this file. See "Relevant Image Scanner Specification" in
Appendix.
Although the standard extension of the file name is ".GMA," there may be exceptions
Creation of a gamma download pattern file can be facilitated using the following utilities for
editing the gamma correction pattern:
Coding configuration:
(gray-scale in the X direction),(gray-scale in the Y direction),
(X0 output value),(X1 output value),(X2 output value),........
(X253 output value),(X254 output value),(X255 output value)
Meaning of each element:
(gray-scale in the X direction) indicates the size and the gray scale of the input value.
(In this driver, this value is fixed at 256.)
(gray-scale in the Y direction) indicates the size and the gray scale of the output value.
(In this driver, this value is fixed at 256.)
(Xx output value) indicates the output value, in the range of 0 (bright) to 255 (dark), for
an input value x.
Note
Use a delimiter other than a number to delimit elements. For most cases, use a
comma (,).
62
Example
256, 256,
255, 254, 253, 252, 251, 250, 249, 248, 247, 246, 245, 244, 243,
242, 241, 240, 239, 238, 237, 236, 235, 234, 233, 232, 231, 230,
229, 228, 227, 226, 225, 224, 223, 222, 221, 220, 219, 218, 217,
216, 215, 214, 213, 212, 211, 210, 209, 208, 207, 206, 205, 204,
203, 202, 201, 200, 199, 198, 197, 196, 195, 194, 193, 192, 191,
190, 189, 188, 187, 186, 185, 184, 183, 182, 181, 180, 179, 178,
177, 176, 175, 174, 173, 172, 171, 170, 169, 168, 167, 166, 165,
164, 163, 162, 161, 160, 159, 158, 157, 156, 155, 154, 153, 152,
151, 150, 149, 148, 147, 146, 145, 144, 143, 142, 141, 140, 139,
138, 137, 136, 135, 134, 133, 132, 131, 130, 129, 128, 127, 126,
125, 124, 123, 122, 121, 120, 119, 118, 117, 116, 115, 114, 113,
112, 111, 110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100,
99, 98, 97, 96, 95, 94, 93, 92, 91, 90, 89, 88, 87, 86, 85, 84,
83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, 70, 69, 68,
67, 66, 65, 64, 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52,
51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40, 39, 38, 37, 36,
35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20,
19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
63
5. Using the Gamma Pattern Editor
5.1 Start-up
Click on "Start" and select "Download Pattern Editor" from "Scanner Utility for Microsoft
Windows" under "Programs." The following menu is displayed:
Figure Gamma Pattern Editor Tool start-up menu
64
5.2 [File] menu
♦
[Load]
This menu is used to read the Gamma Download file and display the graph and gradations.
The name of the open file is displayed above the graph area.
♦
[Save]
The gamma pattern currently being edited is saved in the file whose name is displayed above
the graph area. If no filename is displayed, the pattern is named and saved in that file.
♦
[Save As]
The gamma pattern currently being edited is named and saved in that file. The saved
filename is then displayed above the graph area.
♦
[Close]
Select this to exit the editing program.
65
5.3 [Help] menu
♦
[About]
Information related to this editor and its version number is displayed.
66
5.4 Gamma Pattern Editing
♦
Graph Area
The graph area is a 256-dot x 256-dot white square area bordered by black lines, where the
relationship between the input values of 0 to 255 (x axis) and output values of 0 to 255 (y
axis) is indicated in blue lines. Each graph dot represents one division (unit).
♦
Gradation
The input is displayed in black and white in 256 single-dot steps from 0 at the left border to
255 at the right border. The gamma function of the scanner is displayed. After saving it, the
displayed (gray scale) gamma function is fixed and constant. The output values are
displayed in single dots in relation to the input values and the brightness of the output
equipment is displayed. To ensure accurate display, the display must be set for "True-Color"
or greater.
♦
Gamma
Calculation of the output values is based on the value γ entered in the edit box; the graph and
the gradation are then displayed. The values that can be input are integers greater than 0 or
fractions.
<<Formula>> Output = (input ÷ 255)γ x 255 (Input = 0 - 255)
♦
Free Edit
Designates whether to enable editing of the graph area directly using the mouse cursor.
If this box is checked, the gamma pattern input edit box cannot be used and only editing
using the mouse cursor is supported.
♦
Smooth
Designates whether to smooth edited curves. This setting is only valid when Free Edit is
selected. In this setting, the curved lines drawn by the mouse are automatically smoothed.
This is reflected in the graph and gradation display.
♦
Reverse
Designates whether to reverse black and white. When this box is checked, the current output
values are converted to (255 - output values).
67
6. How to Use the FUJITSU Scanner Control Center
6.1 Outline
This software that is resident in the system continuously monitors the scanner connected and
starts the target application in response to an instruction from the operation panel in the scanner.
(Pressing the start button on the scanner starts the application that has been set in advance.)
For applicable models, see "Relevant Image Scanner Specification" in the Appendix.
6.2 How to Start the FUJITSU Scanner Control Center
Select as follows: [Start] - [Program] - [Scanner Utility for Microsoft Windows], then
[FUJITSU Scanner Control Center]
If this application is started, it is stationed in the system, then an icon is displayed on the task
tray.
An icon indication changes to show how the scanner is connected as follows:
1. The scanner can be used:
2. The scanner power is turned off and not connected:
Right-clicking the icon displays the following pop-up menu.
Left-clicking the icon displays the scanner being connected as shown below.
The scanner that has been monitored by this application is indicated with a check mark.
68
6.3 Pop-up Menu
♦
[Rescan Scanner]
Rescans the scanner that is currently connected.
A scanner that is not recognized by the OS cannot be found even though it is rescanned.
♦
[Option]
Sets up the application to be started when the start button of the scanner is pressed.
[Path]
Specifies a file name of the application to be started with its absolute pathname.
A file can be also selected directly by using the […] button.
[Argument]
Specifies an argument to be passed when starting the specified application. (This item can
be omitted.)
[Start in]
Specifies a default folder for starting the application.
A default folder can be also selected by using the […] button.
(This parameter can be omitted.)
69
[Run]
Specifies the display size of the application to be started.
[Use Plug-In]
Checking this check box specifies a plug-in.
(A plug-in is an additional program for adding a new function to the application.)
[Setting]
Sets a plug-in in accordance with the following procedure:
• Pressing the [Setting] button after selecting a target plug-in name in the plug-in list displayed
displays the plug-in setting screen.
• Pressing the [OK] button after setting each item reflects the settings for the application to be
started.
[Install]
A new plug-in can be installed.
Press the [Install] button and specify a file of the plug-in to be installed. A new plug-in is
registered in the list.
* Up to 50 plug-ins can be registered.
70
<<Setting the Start button>>
If the scanner being monitored has function keys, it is necessary to assign a function key to the
start button in advance.
If no function key has been assigned to the start button, a dialog box for determining whether to
set the start button is displayed when the dialog box is displayed after selecting [Option] on the
pop-up menu.
Selecting "Yes" displays a dialog box below.
(If "No" is selected, the function to start any application when the start button in this application
is pressed is disabled.)
Pressing the [OK] button after selecting one of function keys from F1 to F3 enables assigning a
function key to the start button. If the [Cancel] button is pressed, the function key is not
assigned to the start button.
(If the [Cancel] button is pressed, the function to start any application when the start button in
this application is pressed is disabled.)
71
About how to replace consumables
When [Scanner Information] tab is selected, the following dialog appears.
An equivalent count of the pages read after consumables are replaced is also displayed in the
part of the red frame in the figure. To set the consumables counter to zero after replacing
consumables, click the [Counts Reset] button. Depending on the device, this operation can
be executed using the operation panel of the device. Displayed consumables names or item
numbers also vary depending on the device. For information, see the operator’s guide of the
device.
Note
Depend on some scanner models, once the [Scanner Information] tab appears, the operation
panel is unable to be handled. In this case, close this dialog and turn the power ON/OFF of
the scanner. After the scanner setup, the operation panel is able to be handled.
When using a scanner, the following message may be displayed.
If this message appears, replace consumables following the instructions below.
72
< If replacing consumables immediately >
1. Check [This message not display again.]
2. In cases where consumables are replaced after completing all documents being scanned,
click [Ignore]. In cases where scanning is stopped for an immediate replacement, click
[Cancel].
3. Following the operator’s guide of the device, replace the consumables.
4. Select [Scanner Information] tab, click [Counts Reset] button to reset the consumables
counter.
< If replacing later (immediate replacement is impossible) >
1. If it is not necessary to display this message again, check [This message not display
again]*. If it is necessary to display this message again after scanning xxx pages, check
[Warns again after scanning xxx pages].
2. If the scanning is continued, click [Ignore] and close the message. If the scanning is
stopped, click [Cancel] and close the message.
3. Replace consumables as soon as possible or when this message appears next time.
4. After the replacement, click [Counts Reset] of [Scanner Information] tab.
(* If [This message not display again] is checked, this message will not appear before the
consumable counter is reset.)
About Adjustment of Offset / Magnification
When [Scanner Information] tab is selected, the following dialog appears.
73
When [Adjust Offset/Magnification] button is clicked, the following dialog box is displayed.
*This button may not be displayed depending on the scanner model.
Note
Depend on some scanner models, once the [Scanner Information] tab appears, the operation
panel is unable to be handled. In this case, close this dialog and turn the power ON/OFF of
the scanner. After the scanner setup, the operation panel is able to be handled.
Using this dialog box, the offset of the leading edge and the magnification for the subscanning direction can be changed.
[Offset Setting]
If the written document and the desired read position for scanning are different, fine
adjustment is possible.
At shipment, the offset has been adjusted to an optimum value within a certain range.
Therefore, adjustment is not generally required.
*The maximum size of changes depends on the device.
Enable eliminating a dark area on the top of the image.
Enable eliminating a dark area on the left side of the image.
These modes can be selected to eliminate the dark area on the leading edge and the left
side appeared when using the flat bed
[Vertical magnification Adjustment]
The Vertical magnification correction value of sub-scanning direction can be changed.
For ADF scanning, the image is expanded or shrunk in the paper feeding direction based on
the setting value at shipment.
For FB scanning, the image is expanded or shrunk in the direction to which the scan head
moves based on the setting value at shipment.
This function is used to adjust the image whose ratio of length and width seems different
from the original document.
74
*The settable value varies depending upon the device used.
♦
[Select Scanner]
When multiple scanners are connected, select a scanner to be monitored.
With this application, only one scanner can be monitored at a time. If multiple scanners are
connected, scanner switching is required to monitor the individual scanners.
Select a scanner to be monitored in the list of scanners to be connected. (The list is given
below.)
Left-clicking the task tray icon displays connected scanner names on the pop-up menu. It is
also possible to select a scanner on this menu.
♦
[Help]
Displays help information concerning to this application.
♦
[About]
Displays version information concerning to this application.
♦
[Exit]
Terminates this application.
75
7. Using the Firmware Updater
This application software is used to update the firmware installed in the scanner device.
However, this application software is automatically executed when the driver installation is
completed. If the software is executed at the installation, it is not necessary to execute again.
This application software shall be used only for the following devices. Do not use for other
devices.
Applicable Devices: fi-4750, M4097D, fi-4750C
Check items before use.
Before using this application software, check the following items.
-
Check that the scanner is connected properly. If more than one scanner are connected,
the update cannot be done correctly. Connect one scanner only that has the firmware to
be updated.
-
If the driver has been activated, close the application software that is using the driver.
How to use
Select as follows: [Start] - [Program] - [Scanner Utility for Microsoft Windows], then
[Firmware Updater]
The program is executed and the following dialog box appears.
Press the [Yes] button. The following dialog box is displayed and the firmware update starts.
* Do not turn off the power of the scanner during the firmware update. Otherwise the device
may break down.
76
When the following dialog box appears, press the [OK] button.
The firmware update has been completed successfully. Reactivate Windows®.
77
8. Troubleshooting
8.1 Error Messages
8.1.1 Messages from the TWAIN Driver
• The input value is outside the range.
Cause:
A value exceeding the range allowed for an input item was input.
User response:
Input a value inside the allowed range. Refer to the input item or the
image scanner specification for the range.
• The input value is not acceptable.
Cause:
A value exceeding the range allowed for an input item was input.
User response:
Input a value inside the allowed range. Refer to [Help] of the item or
the User's Guide for the correct range.
• This file cannot be removed because it is specified in other side.
Cause:
An attempt was made to remove a file using the dither pattern or
gamma download pattern file setting dialog. However, the file is
being used for the other side (front side if back side or back side if
front side).
User response:
Before removing the file, change the setting of the other side and then
remove.
• The initial value contains an invalid value. The default standard value is set.
Cause:
A value outside the specified range, or invalid text was found in the
initial-value data file (the specific item involved is indicated by
Entry=XXXXX). If the file has been modified, the setting value for
the item may be wrong. If the file has not been rewritten, the file may
have been damaged.
User response:
The value is set to a standard value. Be sure to check the hard disk
(chkdsk/scandsk) and check for computer viruses regularly.
• The value is higher than the maximum scanning size. Either the resolution value or the
scanning area has to be reduced.
Cause:
A value exceeding the data capacity of the scanner was specified. As
the resolution is increased, the amount of data to be scanned also
increases.
User response:
Decrease the resolution or reduce the size of the scan area.
78
• The value for custom paper is higher than the maximum scan size. Width needs to equal 279
mm or less and length needs to equal 420 mm or less.
• The value for custom paper is higher than the maximum scan size. Width needs to equal 11
inch or less and length needs to equal 16.53 inch or less.
• The value for custom paper is higher than the maximum scan size. Width needs to equal xxx
pixel or less and length needs to equal xxx pixel or less.
Cause:
A value exceeding the limit applicable to the scan area of the scanner
was specified.
User response:
To specify a custom paper size, specify the value that is smaller than
the value applicable to the device.
• The value for custom paper is greater than the maximum scan size. Width need to less equal
259mm.
• The value for custom paper is greater than the maximum scan size. Width need to less equal
10.24inch.
• The value for custom paper is greater than the maximum scan size. Width need to less equal
2048pixel.
Cause:
A value exceeding the limit applicable to the scan area of the scanner
was specified.
User response:
To specify a custom paper size, specify the value that is smaller than
259mm (10.24inch, 2048pixcel)
• The resolution must be less or equal to xxx dpi when scanning in Gray Scale.
• The resolution must be less or equal to xxx dpi when scanning in Color.
• Cannot specify Long Page Scan. Width need to less equal 400dpi.
Cause:
There is a limit on the resolution when gray-scale scanning, long page
scanning or color scanning is used.
User response:
Specify a resolution value that is below the indicated xxx dpi.
• Cannot specify Gray Scale with Custom resolution.
• Cannot specify Color with Custom resolution.
•
Cause:
Custom resolution was designated when Gray Scale or Color was
designated.
User response:
Designate a resolution value other than Custom.
Cannot specify Gray Scale with duplex document.
Cause:
Duplex scanning is specified with Gray Scale specified.
User response:
At duplex scanning, select Black/white binary or Half tone for the
[Image type].
79
• Cannot specify Individual Setting with Gray Scale.
• Cannot specify Long Page Scan with Gray Scale.
Cause:
Gray Scale and Individual Setting are specified at the same time.
Gray Scale and Long Page Scanning are specified at the same time.
User response:
Uncheck Individual Setting when specifying Gray Scale.
At Long Page scanning, select Black/white binary or Half tone for the
[Image type].
• Your application using may not support page end detection, or undefined image size
function.
Cause:
Scanned image may not be displayed correctly when scanning by
using the “page end detection” or “undefined image size” function
with the application which is not supporting these functions.
User response:
When scanned image is not displayed correctly, please select
“disable” for the [Option]-[Rotation]-[Automatic Size and Skew
detection].
• Dither pattern file not found.
Cause:
File download has been specified, but a file has not been selected.
User response:
Use the [File…] button to specify a file.
• Gamma pattern file not found.
Cause:
File download has been specified, but a file has not been selected.
User response:
Use the [File…] button to specify a file.
• Selected file can not be deleted.
If the selected setting file is write-protected, it cannot be deleted.
Cause:
User response:
Use Explorer to delete the file later.
• Description not specified.
Cause:
The description of the setting file has not been specified.
User response:
Enter the description of the setting file in the description field. Then,
try scanning again.
• Filename not specified.
Cause:
The filename of the setting file has not been specified.
User response:
Enter the filename of the setting file. Then, try scanning again.
80
• Specified string is too long.
Cause:
The specified string is too long. Up to 128 en-size characters and up
to 64 em-size characters can be specified.
User response:
User response: Reduce the number of characters in the string so that
they do not exceed 128 en-size characters. Then, try scanning again.
• Cannot specify next words for filename. \:;?”<> .
Cause:
The specified filename contains one or more of the following
characters: \:;?”<> .
User response:
Enter a file name that does not contain the above characters. Then,
make the settings again.
• The image scanner not found.
Cause:
Possible causes include the following: an image scanner that is not
supported by this driver has been connected, no image scanner has
been connected, or the cable is not connected.
Otherwise, the initial values of the image scanner were overwritten
while the driver was open.
User response:
Check the connection of the image scanner.
Check the scanner is not used by other application.
• The specified image scanner is being used.
Cause:
The image scanner may be already in use by another application, or
the TWAIN driver may have been started twice.
User response:
User response: After all applications are terminated, restart the image
scanner for scanning.
• An input-output error occurred in the image scanner.
•
Cause:
A fault occurred during the scan operation of the image scanner.
There may be a fault in the image scanner itself.
User response:
Turn off the power of all devices, then turn on the power of the
computer before turning on the scanner and retry scanning. If the
error still occurs, contact the retail store where the image scanner was
purchased, or the nearest service center.
Scanner is turned OFF. Data source processing is closed. Turn ON the scanner and re-scan.
Cause:
Scanner may be turned OFF during scanner use.
User response:
Turn ON the scanner and re-scan. If the error persists, reboot the PC.
• Paper jammed in the ADF
81
Cause:
A paper jam occurred in the device.
User response:
Turn off the power of the device, then remove the paper from inside
the device. Removing the paper by using excessive force will result
in device failure, so be careful.
• The ADF is open. Close the ADF and set the document on ADF paper chute or Hopper.
Cause:
The ADF cover is open.
User response:
Close the ADF cover, and set the document on ADF paper chute or
Hopper.
• No paper on ADF paper chute or Hopper.
Although ADF was selected as the paper feeding method, no paper is
Cause:
found on ADF paper chute or Hopper.
Select another paper feeding method or set the document on ADF
User response:
paper chute or Hopper.
•
The ADF is open, or No paper on ADF paper chute or Hopper.
Cause:
The ADF cover is open, or there is no paper on ADF paper chute or
Hopper.
User response:
Close the ADF cover, or load paper.
• Insufficient buffer memory size of scanner device for current scanning parameters. Please
reduce the scanning area or the resolution, or install additional memory in the scanner.
Cause:
A memory option has not been installed in the image scanner.
Otherwise, a large area or resolution that is not supported by the
image scanner has been specified.
The memory inside the scanner may be insufficient due to the
excessive data size of the scanning image.
User response:
Reduce the scanning area or resolution. Otherwise, install the
memory option. Refer to the User's Guide of the image scanner for
more information.
In color scanning, try to increase the data compression ratio.
• The current parameter(s) is (are) not allowed. Please use (an)other parameter(s) and try
scanning again.
Cause:
An incorrect value has been specified for the image scanner. The
problem may be due to an illegal combination with the specification
value from the application.
User response:
Change the specification values. Then, try scanning again.
• Irregular status is detected in scanner..
Cause:
A scanner fault such as a blown fuse or foreign matter in the scanning
82
section has occurred.
User response:
Check the scanner status. If a fuse has blown, replace the fuse. If
there is foreign matter in the scanning section, remove the foreign
matter. If the error persists, contact the retail store where the image
scanner was purchased or the nearest maintenance and service center.
• Hardware Error was detected. Carrier motor/sensor was broken or Shipping Lock is set in
"Lock" position. Please refer to the user's manual for your scanner.
Cause:
The Shipping Lock may not be set in "Unlock" position.
User response:
Check the Shipping Lock.
If the Shipping Lock is set in "Lock" position, set the Shipping Lock
in "Unlock" position referring to the user's manual for your scanner.
• Ink cartridge is not installed in the imprinter properly. Please check the installation and try
again.
Cause:
The imprinter (Endorser) has no ink cartridge or the ink cartridge may
be mounted improperly.
User response:
Check that the ink cartridge of the imprinter is mounted properly and
scan again.
• Imprinting position is set out of paper. Please check the imprinting position and try again..
Cause:
Printing is not available because the printing part is outside the paper
width.
User response:
Adjust the imprinter so that the printing part is settled within the paper
width.
• A Hardware Alarm is detected in the Imprinter or Endorser option.
Cause:
User response:
•
Failure on Imprinter or Endorser.
Please check if the Imprinter or the Endorser is installed completely.
If the error occurs after checking the Imprinter or the Endorser, please
contact the retail store where the product was purchased or the nearest
service center.
The double feed is detected.
Cause:
The papers are scanned with double feeding. (One paper stuck to
another)
User response:
Remove the papers stopped by double feeding, and reset them.
• Not enough memory in PC.
Cause:
Insufficient memory for scanning. The memory available may be
insufficient because an application consuming much GDI memory is
83
operating, too many other programs operate at the same time, or there
are too many registered device drivers. The user may mistakenly
think that adding more memory will solve this problem. However, in
most cases, memory shortage is due to insufficient conventional
memory (called the main memory within 640 kilobytes). Checking
CONFIG.SYS and AUTOEXEC.BAT may be a better solution.
User response:
Cancel the registration of device drivers that are irrelevant and make
sure that only the absolutely necessary programs are operating. Use
the memory optimization tool to allocate as much conventional
memory as possible.
• An error occurred in the temporary file.
Cause:
Accessing the internal temporary file of the scanned image is causing
the error. The disk space may be insufficient, the temporary file may
be damaged, or other programs may be affecting disk access.
User response:
Increase the free space of the disk. Check the hard disk (chkdsk and
scandsk). Make sure that no other program is accessing the disk. If
the error message persists, contact the retail store where the product
was purchased or the nearest service center.
• Download file not found.
Cause:
A file specified as a dither pattern or gamma pattern cannot be found.
User response:
Check that the download file is in the specified directory. Otherwise,
use the file selection dialog to specify an available file.
• Illegal format or data in download file.
Cause:
The format of the specified download file is illegal or the data is
incorrect.
User response:
User response: Use an editor to check file format and data.
• ASPI manager not found.
Cause:
The ASPI manager may not have been installed, or may have been
deleted.
User response:
Reinstall the products, including the ASPI manager attached to the
SCSI board. Then reboot the PC.
• Scanner DLL file not found.
Cause:
An image scanner was selected, but the DLL file of the selected image
scanner has not been installed in the directory in which this driver is
installed.
User response:
Perform the setup again.
84
• A parameter error has occurred (internally)
• The calling procedure is invalid (internally).
• The area is specified incorrectly (internally).
• The calculation result exceeded the value that can be expressed (internally).
• User definition is not registered (internally).
• Illegal value is received during communication with scanner. (internally).
Cause:
This is a program error that occurs during command exchange
between the driver and the image scanner.
User response:
Try again by rebooting the machine. If the error persists, contact the
retail store where the product was purchased or the nearest service
center.
• A general fault of the MSG_XXXXX response (internally).
Cause:
This is a program error that usually occurs during internal message
transfer. This message involves the sub-messages described later.
User response:
Contact the retail store where the product was purchased or the
nearest service center.
• A general fault of the DAT_XXXXX response (internally).
Cause:
This is a program error that usually occurs during internal data
transfer. This message involves the sub-messages described later.
User response:
Contact the retail store where the product was purchased or the
nearest maintenance service center.
• A general fault of the DAT_XXXXX, MSG_SET, and unsupported type response.
(Internally)
Cause:
This is a program error that usually occurs while making the internal
data settings.
User response:
Contact the place of purchase or your nearest maintenance and service
center.
85
• An undefined error occurred
• Processing cannot be continued because of insufficient memory.
• The data source cannot be found.
• The driver is connected to a maximum number of applications supported.
• An operation error occurred.
• An invalid function is specified.
• Unpermitted combination of MSG DG DAT.
• An invalid value is specified.
• An invalid procedure of DG DAT MSG is specified.
Cause:
These sub-messages are added to the error messages "General
MSG_XXXXX response violation (internal)" and "General
DAT_XXXXX violation (internal)." These sub- messages indicate
details about the programming errors that occur during message and
data processing.
User response:
Contact the retail store where the product was purchased or the
nearest service center.
86
8.1.2 Error messages relating to gamma correction pattern editing
• Enter a positive decimal value.
Cause:
A value other than a number has been entered as the gamma
correction value.
Alternatively, 0 or a negative value has been entered.
User response:
Reenter a valid value.
• The file could not be created.
Cause:
The file for saving could not be created. There is insufficient space to
save the file or the disk to which the file was to be saved is corrupted.
Alternatively, writing to the directory in which the file was to be
saved may not be allowed or other programs relating to disk access
may be affecting performance.
User response:
Increase the amount of available space on the disk.
Use a utility such as chkdsk or scandisk to check the hard disk.
Ensure that any background programs that access the disk are not
operating
If this error message continues to be displayed, contact the place of
purchase or your nearest maintenance and service center.
• The file cannot be opened.
Cause:
The file could not be opened.
The specified file name may be incorrect or the disk from which it is
being read may be corrupted. Alternatively, the specified file may be
a write-only file or other programs relating to disk access may be
affecting performance.
User response:
If the specified filename is correct, use a utility such as chkdsk or
scandisk to check the hard disk. Ensure that no background programs
that access the disk are operating.
If this error message continues to be displayed, contact the place of
purchase or your nearest maintenance and service center.
• There is a file formatting error.
Cause:
There is an error in the format of the specified file. Either an incorrect
file has been specified or the content of the specified file is incorrect.
User response:
After checking the users' manual, check that the content of the
specified file is correct.
87
8.1.3 Messages concerning to FUJITSU Scanner Control Center
• Failed to start-up the application. Check the setting of FUJITSU Scanner Control Center.
• The setting of the path is blank. Check the setting of FUJITSU Scanner Control Center.
• Can not find the specified file. Check if the specified path and file name is correct.
• Can not find the specified work folder. Check if the specified path is correct.
Cause:
The setting of the application may be inadequate.
User response:
Check setting items of [General] in [Application Dialog] and make
sure settings are correct and there is no omission. If you find any
incorrect setting or omission, correct it.
• The same Plug-in has been installed already. Specified Plug-in can not install.
Cause:
An attempt was made to install the same plug-in that has been already
installed.
User response:
Two or more plug-ins assigned to the same name cannot be installed.
• The specified file is not the effective plug-in. Specified file can not install.
• Can not find the entry point of the specified plug-in. Specified file can not install.
Cause:
The specified file may not be the effective plug-in.
User response:
Check whether the specified file is the effective plug-in and retry.
• Exceeded the number of plug-in to be supported. Can not install the new plug-in.
Cause:
The number of plug-ins to be supported was exceeded.
User response:
The maximum number of plug-ins that can be supported is 50. Delete
unnecessary plug-ins in the folder where FUJITSU Scanner Control
Center has been installed, then install another plug-in.
• The plug-in has not been installed.
Cause:
The check box "Use a Plug-In" was checked but no plug-in has been
installed.
User response:
To use a plug-in, install a plug-in, then check the check box "Use a
Plug-In."
• Can not find the application for the Plug-in use. Can not use the specified plug-in
Cause:
The application to be used for the plug-in may not have been installed.
User response:
Verify that the application to be used for the plug-in has been
installed. If no application is found, install it.
88
• Scanner could not find although it searched again. Check the connection of the scanner and
retry again
Cause:
The scanner power may not have been turned on or the cable may
have been connected incorrectly. Otherwise, the OS may not
recognize the scanner.
User response:
Make sure that the scanner power has been turned on and the cable
has been connected correctly, then retry rescanning. Or, check if the
OS recognizes the scanner. If the OS does not recognize it, let it
recognize the scanner, then retry.
• Can not rescan the scanner. Close the application using the driver and retry again
Cause:
An attempt was made to rescan while the driver was in use.
User response:
It is impossible to rescan while the driver is in use. Close the
application that uses the driver and retry.
• Can not get the EEPROM data. The setting of the function key can not change. Check the
connection of the scanner
• Can not change the setting of the function key. Check the connection of the scanner and try
the operation again
Cause:
While the scanner with function keys are being monitored, the scanner
power may be turned off or the cable may be connected incorrectly.
User response:
Make sure that the scanner power has been turned on and the cable
has been connected correctly.
• It is not authorized to write into the folder which is installed FUJITSU Scanner Control
Center. Can not change the function of the function key. Check the Access Authority of the
folder which is installed FUJITSU Scanner Control Center.
Cause:
While the scanner with function keys are being monitored, Access
Authority may not have been set to the folder where the FUJITSU
scanner Control Center has been installed.
User response:
To change the setting of the function key, Access Authority of the
folder where FUJITSU scanner Control Center has been installed is
required. Set Access Authority to the folder where FUJITSU scanner
Control Center has been installed, or execute it with Administrator
Authority.
• Scanner is not selected. Please select a scanner
Cause:
The OK button was pressed without selecting the scanner in the
scanner select dialog.
User response:
Press the OK button after selecting the scanner to be monitored.
89
8.1.4. Messages relating to the Firmware Updater
• The firmware updater is already running.
Cause:
The same application software is tried to execute concurrently.
User response:
Use the one already executed.
• ASPI manager has not been installed. Please install the ASPI manager.
• ASPI manager of unsupported revision has been installed. Please install the ASPI manager
of the revision 4.1 or later.
Cause:
The ASPI manager has not been installed, or revision may be old.
User response:
After installing the ASPI manager of revision 4.0 or later (For
Windows® 2000 or Windows® Me, 4.60 or later; For Windows® XP,
4.70 or later), execute this application software.
• More than one scanner is connected. Please connect only one scanner.
Cause:
Scanners other than the one with the firmware to be updated are
connected. (If more than one scanner is connected, the applicable
scanner cannot be detected properly resulting in the unsuccessful
update.)
User response:
Connect one scanner to be updated, and then execute this application
software.
• The scanner is in the emulation mode. Please release it from the emulation mode.
Cause:
Connected scanner device has been set to the emulation mode.
User response:
Referring the Operator’s Guide of the device, cancel the emulation
mode, and then execute this application software.
• The driver of the scanner is in use now. Close the application software using the driver.
Cause:
This application software cannot be executed with the driver
activated.
User response:
Close the application software that is using the driver, and then
execute the application software.
• Failed to obtain the model revision. Please check the connection of the device.
Cause:
The device information may not have been obtained due to the wrong
connection of the scanner.
User response:
After confirming the scanner connection, execute the application
software again.
90
• The applicable scanner is not connected or the driver is in use. Please connect the applicable
scanner or close the application software using the driver. The process is cancelled.
Cause:
The scanner may not been connected properly or the driver may be
used.
User response:
Check the connection of the device or close the application software if
it is using the driver. Then execute this application software again.
• Failed to load the Flashwt.dll.
• Localize DLL version is different.
• Data file is incorrect. The process is cancelled.
Cause:
The relevant dill fail or the data file for update has not been installed
correctly, broken or deleted
User response:
See section 3 and install the driver again.
91
8.2 Device Trouble Related to Operation
• The [Scan] button is pressed, but scanning is not performed.
Cause:
Has the scanner power been turned on? Has the SCSI cable been
connected correctly? Has the correct device type been selected using
[Select TWAIN Input Device]?
• The scanner appears to be operating, but no image is displayed.
Cause:
Has the SCSI cable between the scanner and the main unit been
connected correctly?
Is the [Brightness] value or [Threshold] value too small?
When the [Minimize] button is pressed, is the [Restore] button
displayed?
Is the application set to perform only file output?
User response:
If the [Restore] button is displayed after the [Minimize] button is
pressed, the problem could be the display driver that is being used.
Contact the manufacturer of the display driver.
If a file has been selected as output destination with the environment
settings by the image scanner operation confirmation utility, try to
change to screen output.
• When you don’t know how to replace consumables.
User response:
Refer to section 6 “How to Use the FUJITSU Scanner Control
Center”- [About how to replace consumables] for replacement
procedure of consumables.
Also see the Operator’s guide of the scanner for how to replace
consumables.
92
9. Appendix
9.1 Relevant Image Scanner Specification
Product:
M3091DC (fi-4110C)
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Automatic Document Feed (ADF), Simultaneous double-sided
scanning
Light source:
Fluorescent tube (White)
Basic resolution:
300 dpi
1
Output resolution :
50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Color (24bit) output:
Enabled
2
ADF scanning speed :
B/W
Single sided: 15 pages per minute (200 dpi, A4, 55 kg)
Double sided: 7.5 pages per minute (200 dpi, A4, 55kg)
(=15 screens per minute)
Color
Single sided: 5 pages per minute (150 dpi, A4, 55 kg)
Double sided: 2.5 pages per minute (150 dpi, A4, 55kg)
(=5 screens per minute)
ADF paper chute capacity:
Maximum 50 sheets (A4, ream weight: 55 kg, High quality paper,
normal temperature and humidity)
Document size:
Minimum 52mm x 74 mm
Maximum 216 mm x 356 mm
3
Supported regular paper :
A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower:
Enabled
Contrast setting:
256 steps
Gamma pattern:
Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
1
Change processing is done inside the driver.
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
3
. Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
2
93
Image processing function:
Simplified Dynamic Threshold (floating slice), De-Screen,
Edge emphasis, Reverse image, 256 Color, 8 Color
Interface:
SCSI-II
Batch Detection:
Disabled
Double feed detection:
Disabled
Blank page skip:
Enabled (only when ram cache is used)
Drop out color:
Enabled
94
Product:
fi-4120C
Type:
Desktop
Image sensor:
Color CCD (Reduced optical system)
Operating method:
Automatic Document Feed (ADF), Simultaneous double-sided
1
scanning ,
Long page scanning
Black&White
: Max 216mm x 711mm
2
Grayscale, Color
: Max 216mm x 610mm
Light source:
Fluorescent tube (White)
Basic resolution:
600 dpi
Output resolution:
50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Color (24bit) output:
Enabled
3
ADF scanning speed :
B/W
2
Single sided: 25 pages per minute (200 dpi, A4, 80g/m )
2
Double sided: 12.5 pages per minute (200 dpi, A4, 80g/m )
(=25 screens per minute)
Color
2
Single sided: 25 pages per minute (150 dpi, A4, 80g/m )
2
Double sided: 12.5 pages per minute (150 dpi, A4, 80g/m )
(=25 screens per minute)
2
ADF paper chute capacity:
Maximum 50 sheets (A4, 80g/m , High quality paper, normal
temperature and humidity)
Document size:
Minimum 53mm x 74 mm
Maximum 216mm x 355.6mm
4
Supported regular paper :
A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower:
Enabled
Contrast setting:
256 steps
Gamma pattern:
Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
1
2
3
4
Individual setting : Disabled
In case of color or grayscale, the firmware version of scanner has to be “D00” or latter.
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
95
Image processing function:
Simplified Dynamic Threshold (SDTC), De-Screen,
Edge emphasis, 256 Color, 8 Color
Interface:
SCSI-II, USB1.1
Batch Detection:
Disabled
Double feed detection:
Enabled
Blank page skip:
Enabled (only when ram cache is used)
Drop out color:
Enabled
Automatic Size and Skew detection: End of Page Detection
Use of FUJITSU Scanner Control Center: Enabled
96
Product:
M3092DC (fi-4210C)
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed Flat bed (FB), Automatic Document Feed (ADF),
Simultaneous double-sided scanning
Light source:
Fluorescent tube (White)
Basic resolution:
600dpi (FB), 300 dpi (ADF)
1
Output resolution :
50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Color (24bit) output:
Enabled
2
ADF scanning speed :
B/W
Single sided: 15 pages per minute (200 dpi, A4, 55 kg)
Double sided: 7.5 pages per minute (200 dpi, A4, 55kg)
(=15 screens per minute)
Color
Single sided: 5 pages per minute (150 dpi, A4, 55 kg)
Double sided: 2.5 pages per minute (150 dpi, A4, 55kg)
(=5 screens per minute)
ADF paper chute capacity:
Maximum 50 sheets (A4, ream weight: 55 kg, High quality paper,
normal temperature and humidity)
Document size:
Minimum 52mm x 74 mm
Maximum 216 mm x 356 mm
3
Supported regular paper :
A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
White level follower:
Enabled
Contrast setting:
256 steps
Gamma pattern:
Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
Image processing function:
Simplified Dynamic Threshold (floating slice), De-Screen,
Edge emphasis, Reverse image, 256 Color, 8 Color
Interface:
SCSI-II
Batch Detection:
Disabled
1
Change processing is done inside the driver.
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
3
. Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
2
97
Double feed detection:
Disabled
Blank page skip:
Enabled (only when ram cache is used)
Drop out color:
Enabled
98
Product:
fi-4220C
Type:
Desktop
Image sensor:
Color CCD (Reduced optical system)
Operating method:
Document fixed Flat bed (FB), Automatic Document Feed (ADF),
1
Simultaneous double-sided scanning ,
Long page scanning
Black&White
: Max 216mm x 711mm
2
Grayscale, Color
: Max 216mm x 610mm
Light source:
Fluorescent tube (White)
Basic resolution:
600dpi
Output resolution:
50 dpi to 600 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Color (24bit) output:
Enabled
Flat bed scanning speed:
B/W : 2.2 sec or less (200 dpi, A4)
Color : 2.1 sec or less (150 dpi, A4)
3
ADF scanning speed :
B/W
2
Single sided: 25 pages per minute (200 dpi, A4, 80g/m )
2
Double sided: 12.5 pages per minute (200 dpi, A4, 80g/m )
(=25 screens per minute)
Color
2
Single sided: 25 pages per minute (150 dpi, A4, 80g/m )
2
Double sided: 12.5 pages per minute (150 dpi, A4, 80g/m )
(=25 screens per minute)
2
ADF paper chute capacity:
Maximum 50 sheets (A4, 80g/m , High quality paper, normal
temperature and humidity)
Document size:
Minimum 53mm x 74 mm
Maximum 216mm x 355.6mm <ADF>
Maximum 216 mm x 297 mm <Flat Bed>
4
Supported regular paper :
A4, A5/A5 Landscape, A6/A6 Landscape, B5,
B6/B6 Landscape, Letter, Legal, US Executive, Name card
Scanning area specification: Specified (one location)
1
2
3
4
White level follower:
Enabled
Contrast setting:
256 steps
Individual setting : Disabled
In case of color or grayscale, the firmware version of scanner has to be “D00” or latter.
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
99
Gamma pattern:
Internal types are not available. (Cannot be downloaded)
At custom specification, entering a value enables to set a pattern.
Image processing function:
Simplified Dynamic Threshold (SDTC), De-Screen,
Edge emphasis, 256 Color, 8 Color
Interface:
SCSI-II, USB1.1
Batch Detection:
Disabled
Double feed detection:
Enabled
Blank page skip:
Enabled (only when ram cache is used)
Drop out color:
Enabled
Automatic Size and Skew detection: End of Page Detection
Use of FUJITSU Scanner Control Center: Enabled
100
1
Product:
M3093GX (fi-4320S, VSP210)
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed, scanner unit moving (flat bed),
Automatic Document Feeder (ADF)
Light source:
Xe discharge tube (Green)
Basic resolution:
400 dpi
Output resolution:
Standard: 400, 300, 240, 200 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Scanning speed:
ADF scanning speed
1.6 sec or less (A4, 200 dpi)
2:
ADF paper chute capacity:
Document size
3:
27 pages/minute (200 dpi, A4, 55 kg)
Maximum 50 sheets, ream weight: 55kg, A4
Maximum 216 mm x 356 mm Legal size paper
Supported regular paper:
A4, A5/A5 Landscape, A6/A6 Landscape, B5, B6/B6 Landscape,
Letter, Legal, US Executive
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold(SDTC)
Image processing circuit II required,
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold(DTC), Smoothing,
Filtering, Noise removal
Interface:
SCSI-II
Batch Detection:
Enabled
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Disabled
1.
2.
3.
Use of this scanner requires that the image compression option board (CMP-2) be installed in the scanner.
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all sizes of paper can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
101
Product:
M3093DG (fi-4320, VSP220)
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed, scanner unit moving (flat bed)
Automatic Document Feeder (ADF)
Simultaneous double-sided scanning
Light source:
Xe discharge tube (Green)
Basic resolution:
400 dpi
Output resolution:
Standard: 600 , 400, 300, 240, 200, 150, 100 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
1
2
Scanning speed :
1.6 sec or less (A4, 200 dpi)
ADF scanning speed:
Single-sided:
Double-sided:
22.5 pages per minute (200 dpi, A4, 55 kg)
(= 45 screens per minute)
ADF paper chute capacity:
Maximum 50 sheets, (ream weight: 55kg, A4 [High quality paper,
normal temperature and humidity)
Document size:
Maximum 216 mm x 356 mm
3
27 pages per minute (200 dpi, A4, 55 kg)
Supported regular paper :
A4, A5/A5 landscape, A6/A6 landscape, B5, B6/B6 landscape,
Letter, Legal, US Executive
Cutout specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC)
With image processing option
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal
Interface:
SCSI-II
Batch Detection:
Enabled
Automatic Size and Skew detection: Page end detection
Use of FUJITSU Scanner Control Center: Disabled
1.
2.
3.
An eight-megabyte expanded memory is required for some models.
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users’ manual for the device. For other
paper sizes, the customer settings can be used.
102
Product:
fi-4340C
Type:
Desktop
Image sensor:
Color CCD, Reduced optical system
Operating method:
Document fixed Flat bed, Automatic Document,
Feed(ADF), Simultaneous double-sided scanning,
Long page scanning (216mm x 1541mm, Black&White only)
Light source:
Fluorescent tube (White)
Basic resolution:
400 dpi
Output resolution:
Standard: 50 dpi to 800 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Color
24bit
Scanning speed:
B/W : 1.2 sec or less (200 dpi, A4)
Color : 2.8 sec or less (200 dpi, A4)
1
ADF scanning speed :
B/W
Single sided: 40 pages per minute (200 dpi, A4, 55 kg)
Double sided: 40 pages per minute (200 dpi, A4, 55kg)
(=80 screens per minute)
Color
Single sided: 16 pages per minute (200 dpi, A4, 55 kg)
Double sided: 24.5 pages per minute (200 dpi, A4, 55kg)
(=29 screens per minute)
ADF paper chute capacity:
Maximum 100 sheets, ream weight: 55 kg, A4 [High quality
paper, normal temperature and humidity])
Document size:
Maximum 216 mm x 297 mm
or Maximum 216mm x 1541 mm with Long Page Scanning Mode
2
1
2
Supported regular paper :
A4, A5/A5 Landscape, A6/A6 Landscape,
B5, B6/B6 Landscape, Letter,, Legal
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC), Edge emphasis,
Edge extraction, De-Screen, SEE(Selectable Edge Enhancement),
Reverse image, 256 Color, 8 Color
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
103
With image processing option
Dynamic Threshold (DTC), Smoothing, Filtering, Noise removal,
Automatic Separation
Imprinter (Endorser):
With imprinter option
1
(Reverse side, minimum left margin printing position of 7 mm)
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction(Printing): Top to Bottom, Bottom to Top
Interface:
SCSI-II
Batch Detection:
Enabled
Double feed detection:
Enabled
Long page scanning:
Enabled (front side and both sides)
Automatic Size and Skew detection :
End of Page Detection, Automatic Page Size Detection, Black
Background
Blank page skip:
Enabled (only when ram cache is used)
Drop out color:
Enabled
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the endorser print position, printing will begin 7 mm from the edge of the page.
104
1
Product:
M3096GX (fi-4620S, VSP310)
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed, scanner unit moving (flat bed),
Automatic Document Feed (ADF)
Light source:
Xe discharge tube (Green)
Basic resolution:
400 dpi
Output resolution:
Standard: 400, 300, 240, 200 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Scanning speed:
2.0 sec or less (A4, 200 dpi)
2
ADF scanning speed :
21 pages/minute (200 dpi, A4, 55 kg)
ADF paper chute capacity:
Maximum 50 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm A3 or Double letter sized paper
3
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape,B4,
B5/B5 Landscape, B6/B6 Landscape, Letter, Letter Landscape,
Legal, Double letter, US Executive/US Executive Landscape
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma patterns:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC)
Image processing option installed
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal
Interface:
SCSI-II
Batch Detection:
Enabled
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Disabled
1.
2.
3
Use of this scanner may require installation of the optional image compression option board (CMP-2) in the
scanner device.
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system
configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
105
Product:
fi-4640S
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed Flat bed, Automatic Document
Feed(ADF)
Long page scanning (297mm x 1387mm)
Light source:
Xe discharge tube(Green)
Basic resolution:
400 dpi
Output resolution:
Standard: 50 dpi to 800 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Scanning speed:
0.9 sec or less
1
ADF scanning speed :
Single sided: 45 pages per minute (200 dpi, A4, 55 kg)
ADF paper chute capacity:
Maximum 100 sheets, ream weight: 55 kg, A4 [High quality
paper, normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
or Maximum 297mm x 1387 mm with Long Page Scanning Mode
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Letter/Letter Landscape,
Double Letter, Legal, US Executive/US Executive Landscape
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC), Edge emphasis, Edge
extraction, SEE(Selectable Edge Enhancement), Reverse image
With image processing option
Dynamic Threshold (DTC), Smoothing, Filtering, Noise removal,
Automatic Separation
1
2
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
106
Imprinter (Endorser):
With imprinter option
1
(Reverse side, minimum left margin printing position of 42 mm)
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction (Printing): Top to Bottom, Bottom to Top
Interface:
SCSI-II
Batch Detection:
Enabled
Double feed detection:
Enabled
Long page scanning:
Enabled
Automatic Size and Skew detection: End of Page Detection, Automatic Page Size Detection
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the endorser print position, printing will begin 42 mm from the edge of the page.
107
Product:
M4097D (fi-4750, VSP330)
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed Flat bed, Automatic Document
Feed(ADF), Simultaneous double-sided scanning
Long page scanning (297mm x 1387mm, Black&White only)
Light source:
Xe discharge tube(Green)
Basic resolution:
400 dpi
Output resolution:
Standard: 50 dpi to 800 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Scanning speed:
0.9 sec or less
1
ADF scanning speed :
Single sided: 50 pages per minute (200 dpi, A4, 55 kg)
Double sided: 45 pages per minute (200 dpi, A4, 55kg)
(=90 screens per minute)
ADF paper chute capacity:
Maximum 100 sheets, ream weight: 55 kg, A4 [High quality
paper, normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
or Maximum 297mm x 1387 mm with Long Page Scanning Mode
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Letter/Letter Landscape,
Double Letter, Legal, US Executive/US Executive Landscape
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC), Edge emphasis, Edge
extraction, SEE(Selectable Edge Enhancement), Reverse image
With image processing option
Dynamic Threshold (DTC), Smoothing, Filtering, Noise removal,
Automatic Separation
1
2
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
108
Imprinter (Endorser):
With imprinter option
1
(Reverse side, minimum left margin printing position of 42 mm)
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction (Printing): Top to Bottom, Bottom to Top
Interface:
SCSI-II
Batch Detection:
Enabled
Double feed detection:
Enabled
Long page scanning:
Enabled (front side and both sides)
Automatic Size and Skew detection: End of Page Detection, Automatic Page Size Detection
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the endorser print position, printing will begin 42 mm from the edge of the page.
109
Product:
fi-4750L
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed Flat bed, Automatic Document
Feed(ADF), Simultaneous double-sided scanning
Long page scanning (297mm x 1387mm, Black&White only)
Light source:
Xe discharge tube(Green)
Basic resolution:
400 dpi
Output resolution:
Standard: 50 dpi to 800 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Scanning speed:
0.9 sec or less
1
ADF scanning speed :
Single sided: 55 pages per minute (200 dpi, A4, 55 kg)
Double sided: 50 pages per minute (200 dpi, A4, 55kg)
(=100 screens per minute)
ADF paper chute capacity:
Maximum 250 sheets, ream weight: 55 kg, A4 [High quality
paper, normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
or Maximum 297mm x 1387 mm with Long Page Scanning Mode
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Letter/Letter Landscape,
Double Letter, Legal, US Executive/US Executive Landscape
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC), Edge emphasis, Edge
extraction, SEE(Selectable Edge Enhancement), Reverse image
With image processing option
Dynamic Threshold (DTC), Smoothing, Filtering, Noise removal,
Automatic Separation
1
2
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
110
Imprinter (Endorser):
With imprinter option
1
(Reverse side, minimum left margin printing position of 42 mm)
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction(Printing): Top to Bottom, Bottom to Top
Interface:
SCSI-II
Batch Detection:
Enabled
Double feed detection:
Enabled
Automatic Size and Skew detection: End of Page Detection, Automatic Page Size Detection
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the endorser print position, printing will begin 42 mm from the edge of the page.
111
Product:
fi-4750C
Type:
Desktop
Image sensor:
LED(RGB) + Reduced optical system
Operating method:
Document fixed Flat bed, Automatic Document
Feed(ADF), Simultaneous double-sided scanning,
Long page scanning (297mm x 1387mm, Black&White only)
Light source:
LED (R, G, B)
Basic resolution:
400 dpi
Output resolution:
Standard: 50 dpi to 800 dpi (at steps of 1dpi)
Grayscale levels (internal):
10 bit 1024 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Color
24bit
Scanning speed:
B/W : 0.9 sec or less
Color : 3.1 sec or less
1
ADF scanning speed :
B/W
Single sided: 50 pages per minute (200 dpi, A4, 55 kg)
Double sided: 45 pages per minute (200 dpi, A4, 55kg)
(=90 screens per minute)
Color
Single sided: 12 pages per minute (200 dpi, A4, 55 kg)
Double sided: 11.5 pages per minute (200 dpi, A4, 55kg)
(=23 screens per minute)
ADF paper chute capacity:
Maximum 100 sheets, ream weight: 55 kg, A4 [High quality
paper, normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
or Maximum 297mm x 1387 mm with Long Page Scanning Mode
2
1
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Letter/Letter Landscape,
Double Letter, Legal, US Executive/US Executive Landscape
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC), Edge emphasis,
Edge extraction, De-Screen, SEE(Selectable Edge Enhancement),
Reverse image, 256 Color, 8 Color
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
112
With image processing option
Dynamic Threshold (DTC), Smoothing, Filtering, Noise removal,
Automatic Separation
Imprinter (Endorser):
With imprinter option
1
(Reverse side, minimum left margin printing position of 42 mm)
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction(Printing): Top to Bottom, Bottom to Top
Interface:
SCSI-II
Batch Detection:
Enabled
Double feed detection:
Enabled
Long page scanning:
Enabled (front side and both sides)
Automatic Size and Skew detection: End of Page Detection, Automatic Page Size Detection,
Black Background
Blank page skip:
Enabled (only when ram cache is used)
Drop out color:
Enabled
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the endorser print position, printing will begin 42 mm from the edge of the page.
113
1
Product:
M3097G
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed, scanner unit moving (flat bed),
Automatic Document Feed (ADF)
Light source:
Fluorescent tube (Green)
Basic resolution:
400 dpi
Output resolution:
Standard: 400, 300, 240, 200 dpi
With image processing option: 50 dpi to 1,600 dpi
(at steps of 1)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Enabled (8 bits) Some release version of scanner do not support
gray-scale output format
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Scanning speed:
1.3 sec or less (A4, 200 dpi)
3.7 sec or less (A3, 400 dpi)
2
ADF scanning speed :
36 pages/minute (200 dpi, A4, 55 kg)
ADF paper chute capacity:
Maximum 100 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
3
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Letter/Letter Landscape,
Double Letter, Legal, US Executive/US Executive Landscape
Isolation specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC)
Image processing option installed
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal
Interface:
SCSI-II
Batch Detection:
Enabled
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Disabled
1.
2.
3
Use of this scanner may require installation of the optional image compression board (CMP-2).
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
114
Product:
M3097DG
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Document fixed, scanner unit moving (flat bed),
Automatic Document Feed (ADF)
Simultaneous double-sided reading
Light source:
Xe discharge tube (Green)
Basic resolution:
Horizontal scanning: 400 dpi
Vertical scanning:
400, 300, 240, 200 dpi
Output resolution:
Standard: 600, 400, 300, 240, 200, 150, 100 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Enabled (8 bits)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
Scanning speed:
1.3 seconds or less (A4, 200 dpi)
1
ADF scanning speed :
Single sided: 36 pages per minute (200 dpi, A4, 55 kg)
Double sided: 30 pages per minute (200 dpi, A4, 55 kg)
(= 60 screens per minute)
ADF paper chute capacity:
Maximum 100 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, Double Letter, Letter/Letter landscape, Legal,
US Executive/ US Executive Landscape
Cutout specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC)
With image processing option
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal.
Interface:
SCSI-II
Batch Detection:
Enabled
Automatic Size and Skew detection: Page end detection
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Disabled
1.
2
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
115
Product: fi-4860C
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Automatic Document Feed (ADF),
Simultaneous double-sided scanning,
Long page scanning (297mm x 878mm, Black&White only)
Light source:
Fluorescent tube (White)
Basic resolution:
400 dpi
Output resolution:
Monochrome: 400, 300, 240, 200, 150, 100dpi
Color: 400, 300, 200, 150, 100dpi
Grayscale levels (internal):
10 bit 1024 levels
Gray scale (8 bits) output:
Enabled
Halftone Patterns:
Dither matrix, Error diffusion
1
ADF scanning speed :
<Monochrome, Asynchronous Scanning>
Single sided:
2
60 pages per minute (200 dpi, A4, 80g/m )
2
Double sided: 60 pages per minute (200 dpi, A4, 80g/m )
(= 120 screens per minute)
<Color, Asynchronous Scanning>
Single sided:
2
60 pages per minute (150,200 dpi, A4, 80g/m )
2
Double sided: 60 pages per minute (150,200 dpi, A4, 80g/m )
(= 120 screens per minute)
2
Hopper capacity:
Maximum 500 sheets, (80g/m , A4 [High quality paper, Normal
temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
or 297mm x 878 mm with Long Page scanning mode.
2
1.
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Double Letter, Letter/Letter
Landscape, Legal, US Executive/US Executive Landscape
Cutout specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 levels
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Dynamic Threshold (SDTC, DTC)
Edge emphasis, Edge extraction, Automatic separation, Mirror
image(Black&White only), Reverse image
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration. Color scanning speed is a value with JPEG enabled.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
116
Imprinter (Endorser):
With Imprinter option (Pre-Imprinter / Post-Imprinter)
1
(Reverse side, minimum left margin printing position of 5 mm)
Maximum number of characters to be printed: 40 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
Direction(Printing): Top to Bottom
Pre-Imprinter / Post-Imprinter switching: Enabled
Interface:
Ultra Wide SCSI
Automatic Size and Skew detection: End of Page Detection, Automatic Deskew,
Automatic Page Size Detection, Black Background
Buffer scan ([Use Memory on Scanner]) function:
Enabled
Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Enable
Batch Detection:
Enabled
Double feed detection:
Enabled
Pre-Pick:
Enabled
Check Over-skew:
Enabled
Blank page skip:
Enabled (when [Ram cache] or [Use Both Memory] is used)
Drop out color:
Enabled
Use of FUJITSU Scanner Control Center: Disabled
1
If 0 mm is specified as the endorser print position, printing will begin 5 mm from the edge of the page.
117
Product:
M4099D (fi-4990)
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Automatic Document Feed (ADF),
Simultaneous double-sided scanning,
Long page scanning (297mm x 878mm, Black&White only)
Light source:
Fluorescent tube (White)
Basic resolution:
400 dpi
Output resolution:
Standard: 400, 300, 240, 200, dpi
With image processing option: 50 dpi to 400 dpi (at steps of 1 dpi)
Grayscale levels (internal):
10 bit 1024 levels
Gray scale (8 bits) output:
Enabled (200 dpi only)
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
1
ADF scanning speed :
<Asynchronous Scanning>
Single sided:
90 pages per minute (200 dpi, A4, 55 kg)
Double sided: 90 pages per minute (200 dpi, A4, 55 kg)
(= 180 screens per minute)
< Synchronous Scanning >
Single sided:
80 pages per minute (200 dpi, A4, 55 kg)
Double sided: 60 pages per minute (200 dpi, A4, 55 kg)
(= 120 screens per minute)
Hopper capacity:
Maximum 1,000 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])
Document size:
Maximum 297 mm x 432 mm
or 297mm 878 mm with Long Page scanning mode.
2
1.
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Double Letter, Letter/Letter
Landscape, Legal, US Executive/US Executive Landscape
Cutout specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 levels
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC)
With image processing option
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
118
Imprinter (Endorser):
With endorser option
1
(Reverse side, minimum left margin printing position of 20 mm)
Maximum number of characters to be printed: 30 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
(There are partly limitations by the revision of the scanner
device.)
Direction(Printing): Top to Bottom
Interface:
SCSI-II
Online offset adjustment:
Enabled
Batch Detection:
Enabled
Automatic Size and Skew detection: End of Page Detection, Automatic Deskew
Drop out color:
Enabled
Double feed detection:
Enabled
Buffer scan (cache using scanner memory) function: Enabled
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.
119
Product:
fi-4990C
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Automatic Document Feed (ADF),
Simultaneous double-sided scanning,
Long page scanning (297mm x 878mm, Black&White only)
Light source:
Fluorescent tube (White)
Basic resolution:
400 dpi
Output resolution:
Monochrome: 400, 300, 240, 200, 150, 100dpi
Color: 400, 300, 200, 150, 100dpi
Grayscale levels (internal):
10 bit 1024 levels
Gray scale (8 bits) output:
Enabled
Halftone Patterns:
Dither matrix, Error diffusion
1
ADF scanning speed :
<Monochrome, Asynchronous Scanning>
Single sided:
90 pages per minute (200 dpi, A4, 55 kg)
Double sided: 90 pages per minute (200 dpi, A4, 55 kg)
(= 180 screens per minute)
Hopper capacity:
Maximum 1,000 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])
Document size:
Maximum 297 mm 432 mm
or 297mm x 878 mm with Long Page scanning mode.
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Double Letter, Letter/Letter
Landscape, Legal, US Executive/US Executive Landscape
Cutout specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 levels
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Dynamic Threshold (SDTC, DTC)
Edge emphasis, Edge extraction, Automatic separation, Mirror
image(Black&White only), Reverse image
Imprinter (Endorser):
With endorser option
3
(Reverse side, minimum left margin printing position of 20 mm)
Maximum number of characters to be printed: 30 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
1.
2
3
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.
120
(There are partly limitations by the revision of the scanner
device.)
Direction(Printing): Top to Bottom
Interface:
Ultra Wide SCSI
Automatic Size and Skew detection: End of Page Detection, Automatic Deskew,
Automatic Page Size Detection, Black Background
Buffer scan ([Use Memory on Scanner]) function:
Enabled
Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Enable
Batch Detection:
Enabled
Double feed detection:
Enabled
Pre-Pick:
Enabled
Check Over-skew:
Enabled
Blank page skip:
Enabled (when [Ram cache] or [Use Both Memory] is used)
Drop out color:
Enabled
Use of FUJITSU Scanner Control Center: Disabled
121
Product:
M3099G, M3099GX
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Automatic Document Feed (ADF), Simultaneous double-sided
scanning
Light source:
Fluorescent tube (Green)
Basic resolution:
200 dpi
Output resolution:
Standard: 400, 300, 240, 200, dpi
With image processing option: 50 dpi to 400 dpi (at steps of 1 dpi)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Disabled
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
1
ADF scanning speed :
<M3099G>
Single sided:
55 pages per minute (200 dpi, A4, 55 kg)
Double sided: 50 pages per minute (200 dpi, A4, 55 kg)
(= 100 screens per minute)
<M3099GX>
Single sided: 60 pages per minute (200 dpi, A4, 55 kg)
Double sided: 50 pages per minute (200 dpi, A4, 55 kg)
(= 100 screens per minute)
Hopper capacity:
<M3099G>
Maximum 500 sheets, ream weight: 55 kg, A4
<M3099GX>
Maximum 1,000 sheets, ream weight: 55 kg, A4
Maximum 297 mm x 432 mm
Document size:
2
1.
2
Supported regular paper :
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Double Letter, Letter/Letter
Landscape, Legal, US Executive/US Executive Landscape
Cutout specification:
Specified (one location)
Background compensation:
Enabled
Contrast setting:
256 levels
Gamma pattern:
3 internal types (can be downloaded)
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
122
Image processing function:
Simplified Dynamic Threshold (SDTC)
With image processing option
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal
Imprinter (Endorser):
With imprinter (endorser) option
1
(Reverse side, minimum left margin printing position of 20 mm)
Maximum number of characters to be printed: 20 characters
Counter display range: 0 to 65535 (5 digits display)
Direction (Printing): Top to Bottom
Interface:
SCSI-II
Batch Detection:
Enabled
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Disabled
1
.
If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.
123
Product:
M3099GH
Type:
Desktop
Image sensor:
Reduced optical system
Operating method:
Automatic Document Feed (ADF), Simultaneous double-sided
scanning
Light source:
Fluorescent tube (Green)
Basic resolution:
200 dpi
Output resolution:
Standard: 400, 300, 240, 200, dpi
with image processing option: 50 dpi to 400 dpi (at steps of 1 dpi)
Grayscale levels (internal):
8 bit 256 levels
Grayscale output:
Disabled
Halftone Patterns:
Dither matrix (can be downloaded), Error diffusion
1
ADF scanning speed :
Single sided: 80 pages per minute (200 dpi, A4, 55 kg)
Double sided:
60 pages per minute (200 dpi, A4, 55 kg)
(= 120 screens per minute)
Hopper capacity:
Maximum 1,000 sheets, (ream weight: 55 kg, A4 [High quality
paper, Normal temperature and humidity])
Maximum 216 mm x 356 mm
Document size:
2
1.
2
Supported regular paper :
A4/A4 Landscape, A5/A5 Landscape, B5, B6/B6 Landscape,
Letter, Legal, US Executive
Cutout specification:
Specified (one location)
White level follower:
Enabled
Contrast setting:
256 steps
Gamma pattern:
3 internal types (can be downloaded)
Image processing function:
Simplified Dynamic Threshold (SDTC)
With image processing option
Edge emphasis, Edge extraction, Automatic separation, Mirror
image, Reverse image, Dynamic Threshold (DTC), Smoothing,
Filtering, Noise removal
This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.
124
Imprinter (Endorser):
With imprinter (endorser) option
1
(Reverse side, minimum left margin printing position of 20 mm)
Maximum number of characters to be printed: 20 characters
Counter display range: 0 to 65535 (5 digits display)
Direction(Printing): Top to Bottom
Interface:
SCSI-II
Batch Detection:
Enabled
Blank page skip:
Enabled (only when ram cache is used)
Use of FUJITSU Scanner Control Center: Disabled
1
If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.
125
9.2 Maintenance Service
This section explains briefly how you can help us to provide you with high-quality maintenance
service.
Since it is practically impossible for the Fujitsu service staff to be aware of every detail of your
daily scanning operation, please understand that our staff may sometimes be unable to answer
your question immediately. To help us in our effort to provide you with the best maintenance
service possible, we ask you to kindly write down the following items (as many as possible):
•
Serial number, version, and date, etc., of this product
•
Name and product number of the image scanner being used
•
The options installed on the image scanner being used
•
Manufacturer, product name, and type number of the computer being used
•
Manufacturer and version of the Windows® OS (whether Windows® has been updated)
•
Name and version of the display driver
•
Name and version of the printer driver
•
Resolution (1024 x 768), number of colors, and number of dots (or points) of the screen
•
Product name of the SCSI adapter, and name and version of the SCSI driver
•
Error occurrence processing (the simpler the processing, the easier it is to determine the
cause.)
Also, we would appreciate it very much if you could kindly verify the following items prior to
receiving our maintenance service;
•
Is the power turned on?
•
Is the cable connected correctly?
•
Is the correct image scanner driver selected?
126
FUJITSU TWAIN32 Scanner Driver / Utility
“Scanner Utility for Microsoft® Windows®”
Users Guide
32 bit version
First Edition August 2002
2nd Edition September 2002
All Rights Reserved, Copyright © PFU LIMITED 2002
• The contents of this document may change for improvements without
prior notice.
• Fujitsu takes no responsibilities for infringements of third parties’
patents or other rights that may stem from the use of the data in this
document.
• Unauthorized reproduction of this document is prohibited
Open as PDF
Similar pages