Optical Preemption & Priority Control Systems
Preemption
Upgrade Kits
PRE–STROBEHAWK™
upgrade kit
PRE-STROBEHAWK™, PRE-EDGE™
& PRE-MX7000™
The PRE–STROBEHAWK™, PRE–EDGE™, and PRE–
MX7000™ preemption emitter systems are used to
operate optical traffic preemption systems such as
the TOMAR STROBECOM® or other competitive
systems. These systems are furnished complete and
PRE–EDGE™
upgrade kit
ready to operate. The lamp, cable, and power supply
are completely waterproof. The power supply has a
parking brake disable feature which may optionally
be connected to the vehicle’s brake switch to
automatically switch the emitter off when the vehicle
is parked to prevent traffic signal lockup at the scene
of an emergency.
PRE–MX7000™
upgrade kit
10 Year Warranty
These products are covered by TOMAR’s standard warranty except that the warranty period is extended to 10 years for the
power supply.
NOTICE: The sale of these items are restricted to state and local governments and to authorized distributors only.
22
TOMAR Electronics, Inc.
2100 W. Obispo Ave.
Gilbert, AZ 85233 USA
(800) 338-3133 tel
(800) 688-6627 fax
www.tomar.com
Preemption Upgrade Kits
PRE–STROBEHAWK™ Upgrade kit
PRE–EDGE™ Upgrade kit
PRE–MX7000™ Upgrade kit
System features:
1 – 20ft. lamp cable 20–2LH–WP1
1 – 780–1228–PRE
2 – RECT–34SWP lamp reflectors
4 – L brackets
4 – mounting brackets
low power mode (reduces range)
System features:
1 – 780–1228–PRE
1 – 28” wire harness
2 – 6” lamp extension cables
1 – cable adapter
1 – bracket
System features:
1 – 781–1228–PRE
1 – WP control cable
1 – WP power cable
Chrome coated reflector lamp
low power mode (reduces range)
Specifications
Item
Description
Power Requirements
Input voltage: 10 to 30VDC
Input current: 2.8A average @ 12.8V, 1.4A average @ 25.6V
Output
Single Xenon flashtube ( PRE–MX7000™ )
Dual Xenon flashtubes ( PRE–STROBEHAWK™ )
Four lamp preemption or NEOBE® flash pattern ( PRE–EDGE™ )
Dual Frequency
Emergency band
Transit band
Control Features
All modes are selected by switching positive, low current, battery voltage. The main battery power may be
left connected to the supply at all times. Current draw is less than 100 microamps standby. Brake disable
circuit auto resets when switch is released.
Construction (power supply)
Glass filled Lexan® case, polyurethane potting
Ordering Information
Model No.
Description
PRE–STROBEHAWK™
Preemption upgrade kit for Federal™ lightbars
PRE–EDGE™
Preemption upgrade kit for Whelen™ lightbars
PRE–MX7000™
Preemption upgrade kit for Code 3™ lightbars
Code 3 and MX7000 are trademarks of the Public Safety Equipment Co.
Edge and Whelen are trademarks of the Whelen Technologies.
STROBEHAWK is a trademark of the Federal Signal Corp.
23
Open as PDF
Similar pages