10 :
ENGLISH
ENGLISH
MODEL
XL-E1H
XL-UH05H
MICRO COMPONENT SYSTEM
OPERATION MANUAL
XL-E1H Micro Component System consisting of XL-E1H (main unit) and CP-E1H (speaker system).
XL-UH05H Micro Component System consisting of XL-UH05H (main unit) and CP-UH05H (speaker system).
The illustration printed
in this operation
manual are for the
model XL-E1H.
(XL-E1H only)
Accessory
Volume control
Please confirm that only the following accessory is
included�.
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors.
It is advisable to avoid exposure to high volume levels.
Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Remote control x 1
Special note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
*92L87500016301Z$*|
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
92L87500016301
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
10F R MW 1
Special notes
WARNINGS:
● When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by
remote control.
● This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
● To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
other than that which is specified is dangerous and
may result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
Information on Proper Disposal
CAUTION:
● This product is classified as a CLASS 1 LASER
product.
● This product contains a low power laser device. To
ensure continued safety, do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel�.
Note:
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of the
owner of the copyright. Please refer to the relevant laws
in your country.
Attention:
Your
product is
marked with
this symbol.
It means
that used
electrical
and
electronic
products
should not
be mixed
with general
household
waste.
There is a
separate
collection
system
for these
products.
A. Information on Disposal for Users (private
households)
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dustbin!
Used electrical and electronic equipment must
be treated separately and in accordance with
legislation that requires proper treatment, recovery
and recycling of used electrical and electronic
equipment.
Following the implementation by member states,
private households within the EU states may return
their used electrical and electronic equipment to
designated collection facilities free of charge*.
In some countries* your local retailer may also take
back your old product free of charge if you purchase
a similar new one.
*) Please contact your local authority for further
details.
If your used electrical or electronic equipment
has batteries or accumulators, please dispose of
these separately beforehand according to local
requirements.
By disposing of this product correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact
your local authorities and ask for the correct method
of disposal.
For Switzerland: Used electrical or electronic
equipment can be returned free of charge to the
dealer, even if you don’t purchase a new product.
Further collection facilities are listed on the
homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform
you about the take-back of the product. You might
be charged for the costs arising from take-back and
recycling. Small products (and small amounts) might
be taken back by your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-back of your
used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact
your local authorities and ask for the correct method
of disposal.
Information on Battery Disposal
The battery supplied with this product contains
traces of Lead.
For EU: The crossed-out wheeled bin implies that
used batteries should not be put to the general
household waste! There is a separate collection
system for used batteries, to allow proper treatment
and recycling in accordance with legislation. Please
contact your local authority for details on the
collection and recycling schemes.
For Switzerland: The used battery is to be returned
to the selling point.
For other non-EU countries: Please contact your
local authority for correct method of disposal of the
used battery.
E-
System connections
■
Precautions
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
10 cm (4”) of free space along the sides, top and back
of the equipment.
10 cm (4”)
���� 10 cm (4”)
����
10 cm (4”)
����
10 cm ����
(4”)
● Use the unit on a firm, level surface free from
vibration.
● Place the speakers at least 30 cm (12”) away from
any CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which
generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for
safety.
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental
aspects of battery disposal.
● This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
● The apparatus is designed for use in moderate
climates.
■
Speaker connection
● Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
● Use speakers with an impedance
of 4 ohms or more, as lower
Incorrect
impedance
speakers
can
damage the unit.
● Do not make a mistake when connecting the right and
left speakers. The right speaker is the one on the right
side when you face the unit.
● Do not let the bare speaker wires touch each
other.
● Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
● Do not stand or sit on the speakers. You may be
injured.
Make sure to unplug the AC power cord before making any connections.
FM aerial
The spec label (*)
MODEL NO.
NO. DE MODELO
XL-E1H
MICRO COMPONENT SYSTEM
SISTEMA MICRO COMPONENTE
AC 220 - 240V
50/60Hz
21W
SERIAL NO.
NO. DE SERIE
MADE IN CHINA
FABRIQUÉ EN CHINA / FABRICADO EN CHINA
92Lxxxxxxxxxxx
The spec label
illustration may be
different from the
actual label used.
(*)Label is located at
the bottom of the
Right speaker
Wall socket
unit.
(AC 220 - 240 V ~ 50/60 Hz)
E-
Red
Black
Left speaker
Remote control - battery installation
Note:
Before using remote control, please remove plastic shield
at battery holder.
Precautions for battery use:
Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due to
battery leakage.
1� Whilst pushing the locking tab towards the center
of the remote control, slide out the battery holder.
Remote
control
Plastic
shield
Battery holder
Back of remote
control
Locking tab
2� Remove the old battery from the battery holder,
insert the new battery and then slide the battery
holder back into the remote control.
Battery holder
Positive (+)
side up
Polarity
(+) symbol
Battery type
Locking tab
Caution:
● Do not use rechargeable battery (nickel-cadmium
battery, etc.).
● Danger of explosion if battery is incorrectly replaced.
● Replace only with the same or equivalent type.
● Batteries (battery pack or battery installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like.
● Installing the battery incorrectly may cause the unit to
malfunction.
Notes concerning use:
● Replace the battery if the operating distance is
reduced or if the operation becomes erratic. Purchase
“CR 2025”, coin lithium battery.
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
General control
■
Volume auto set-in
● If you turn off and on the main unit with volume set to
16 or higher, the volume will start at 16.
● If you turn the unit off then on again with the volume
level set to less than 16, it will turn on again at the
level set.
■
Volume control
Press the VOLUME +/– button to increase or decrease the
volume.
■
Extra bass control (X-BASS)
When the X-BASS button is pressed, the unit will enter the
extra bass mode which emphasises the bass frequencies
and “X-BASS” indicator will light up. To cancel the extra
bass mode, press the X-BASS button again.
■
■
To turn the power on
Function
Power on/
off
Main unit
Remote
control
Operation
Press to turn the
power on or to
go to stand-by
mode.
Auto power off function
The main unit will enter the stand-by mode after 15 minutes
of inactivity during:
CD/USB: In the stop or pause mode.
TUNER: No reception of broadcast signal.
AUDIO IN: No detection of input signal.
■
Muting
The volume is muted temporarily when pressing the
MUTE button on the remote control. Press again to restore
the volume.
E-
General control (continued)
■
Function (on main unit only)
■
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
CD
USB
AUDIO IN
TUNER
Equalizer
When the EQUALIZER button is pressed, the current
mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly until the
desired sound mode appears.
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or
the AC power lead becomes disconnected.
FLAT
No equalisation.
ROCK
For rock music.
CLASSIC
For classical music.
POPS
For pop music.
VOCAL
Vocals are enhanced.
JAZZ
For jazz.
Listening to a CD or MP3/WMA disc
■
Disc playback
1� Press the ON/STAND-BY button to turn the power
on.
2� Press the CD button on the remote control or
FUNCTION button on the main unit repeatedly to
select CD function.
� Open the disc compartment.
� Place the disc on the disc tray, label side up.
■
5� Close the disc compartment.
Various disc functions
Function
Pause
Track up/
down
Fast
forward/
reverse
Main
unit
Remote
control
Operation
Press in the
playback mode.
Press the
button to resume
playback from
the paused point.
Press in the
playback or stop
mode. If you
press the button
in the stop mode,
press the
button to start
the desired track.
Press and hold
down in the
playback mode.
Release the
button to resume
playback.
Total number
of tracks on
disc.
Total playing
time of the
disc.
Total number
of files (track)
on the disc.
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
� Press the
button to start playback. After the last
track is played, the unit will stop automatically.
Notes for CD or MP3/WMA discs:
● When the end of the track is reached during fast
forward, the CD operation will be stopped. When
the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
● Rewritable multi-session discs with unfinished writing,
can still be played.
E-
Listening to a CD or MP3/WMA disc (continued)
■
Direct track search
■
Random play
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
The tracks on the disc can be played in random order
automatically.
Use the Direct Search buttons on the remote control
to select the desired track whilst playing the selected
disc.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RND” icon light up.
● The Direct Search buttons allow you to select up to
number 9.
● When selecting number 10 or higher, use the “10+”
button.
To cancel random play:
Press and hold the PLAY MODE button. “RND” icon will
disappear.
A. For example, to choose 13
1� Press the “10+” button once.
2� Press the “1” button.
� Press the “3” button.
B. For example, to choose 130
1�
2�
�
�
Selected track number
Notes:
● During random playback, repeat function is not
possible. Selecting the repeat function will cancel the
random playback.
● Playback will stop after all the tracks is played
randomly.
● If you press the
or
button during random play,
you can move to the track selected next by the random
operation.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the button on main unit or remote control.
■
■
You can choose up to 32 selections for playback in the
order you like.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
1� Whilst in the stop mode, press the MEMORY button
on the remote control to enter the programming
save mode.
To repeat one track:
Press the PLAY MODE button repeatedly until “RPT ONE”
appears. Press the
button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “RPT ALL”
appears. Press the
button.
To repeat all desired tracks:
Perform steps 1 - 6 in “Programmed play” section on pages
5 - 6 and then press the PLAY MODE button until “RPT
ALL” appears.
To cancel repeat play:
Press the PLAY MODE button again until “ ” or “
disappears.
Programmed play
Total tracks on CD
Total tracks on MP3/WMA disc
2� Press the
or
button on the remote control to
select the desired track.
”
Selected track number
� Press the MEMORY button to save the track
number.
E-
Listening to a CD or MP3/WMA disc (continued)
� Repeat steps 2 - 3 for other tracks. Up to 32 tracks
■ Procedure to play back MP3/WMA disc
with folder mode on
can be programmed. If you make a mistake, press
the CLEAR button whilst the “MEMORY” indicator
is flashing. Each time the button is pressed, one
track will be cleared, beginning with last track
programmed.
To play back CD-R/RW�.
1� Press the CD button, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed.
5� Press the
button to start playback.
� Press the CD button. The total number in memory
will appear.
Total number of tracks
2� Press the FOLDER button and press the FOLDER
( or ) button to select desired playback folder.
(Folder mode on)
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is
lit, press the CLEAR button on the remote control. The
“MEMORY” indicator will disappear and all the programmed
contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY”
indicator will be displayed. Follow steps 1 - 4 to add tracks.
The new tracks will be stored after the last track of the
previous programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode,
press the
or
button.
Folder number
Total tracks in chosen folder
� Select desired file to be played back by pressing
the
or
� Press the
button.
(CD
) button. Playback will start.
● File name, Title, Artist and Album name are
displayed if they are recorded on the disc.
● Press the FOLDER ( or ) button, and the folder
can be selected even though it is in playback mode.
It will continue playback mode with the first track of
the selected folder.
● Display content can be changed by pressing the
DISPLAY button.
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
File name display
Title display
Counter display
Artist display
Album display
Note:
If the track of “Copyright protected WMA file” or “Not
supported playback file” is selected during playback, “NO
SUPPORT” is displayed on unit display and the track is
skipped.
E-
Listening to USB mass storage device/MP3 player
■ To play back USB/MP3 player with folder
mode on
1� Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to
select USB function. Connect the USB memory
device that has MP3/WMA format files on the unit.
When the USB memory is connected to the main
unit, the track information will be displayed.
2� Press the FOLDER button, then press FOLDER
( or ) button to select desired playback folder. To
start playback, go to step 4. To change the playback
folder, press the FOLDER ( or ) button to select
�������
another folder�.
� Select desired file to be played back by pressing
the
or
� Press the
1� Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device
that has MP3/WMA format files on the unit. When
the USB memory is connected to the main unit, the
device information will be displayed.
(USB
) button. Playback will start.
● File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
■ To play back USB/MP3 player with folder
mode off
button.
■ To remove USB memory device
1� Press the (USB ) button to stop playback.
2� Press the button again and wait until “OK” is
displayed.
2� Select desired file to be played back by pressing
the
or
button.
� Press the
(USB
) button. Playback will
� Disconnect the USB memory device from the USB
● File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
● Display content can be changed by pressing the
DISPLAY button.
Notes:
● Always remove the USB memory device after “OK”
appears on the display. Improper removal of the USB
memory device may cause irregularities to happen.
● Should this happen, turn off the unit and then turn it
on again.
● SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
start.
Note:
To pause playback:
Press the
(USB
terminal.
) button.
E-
Listening to the radio
Listening to USB mass storage device/
MP3 player (continued)
Notes:
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
● The USB port is only intended for direct connection to
a USB memory device without any cable.
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● Playlists are not supported on this unit.
● This unit can display File Name up to 16 characters.
● Folders with non playable files are also counted.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
■ Tuning
1� Press the ON/STAND-BY button to turn the power
on.
2� Press the TUNER button on the remote control or
FUNCTION button on the main unit repeatedly to
select tuner function.
� Press the TUNING ( or ) button to tune in to the
desired station.
The following functions are the same as CD
operation:
Page
Direct track search.........................................................5
Repeat play.....................................................................5
Random play...................................................................5
Programmed play..................................................... 5 - 6
Note:
If USB memory device is not connected, “NO MEDIA” will
be shown on the display.
● Manual tuning:
Press the TUNING ( or ) button repeatedly to
tune in to the desired station.
● Auto tuning:
When the TUNING ( or ) button is pressed
for more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
● When an RDS (Radio Data System) station is tuned
in, the frequency will be displayed first, and then the
RDS indicator will light up. Finally, the station name will
appear.
● Full auto tuning can be achieved for RDS stations
“ASPM”, see page 9.
To receive an FM stereo transmission:
● Press the TUNER button to select stereo mode and
“ST” indicator will be displayed. “
” will appear when
an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
E-
Using the Radio Data System (RDS)
(XL-E1H only)
Listening to the radio (continued)
■ To preset a station
RDS is a broadcasting service which a growing
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“TP” (Traffic Programme) will appear on the display when
the received broadcast carries traffic information, and
“TA” (Traffic Announcement) will appear whilst a traffic
information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received.
You can store 40 FM stations in memory and recall them at
the push of a button. (Preset tuning)
1� Perform steps 1 - 3 in “Tuning”.
2� Press the MEMORY button.
� Within 5 seconds, press the
or
button
to select the preset channel number. Store the
stations in memory, in order, starting with preset
channel 1.
� Press the MEMORY button to store that station
in memory. If the “MEMORY” and preset number
indicators disappear before the station is
memorised, repeat the operation from step 2.
5� Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in
the memory, the station previously memorised for
that preset channel number will be erased.
You can control the RDS by using the buttons on the
remote control only.
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
■ Information provided by RDS
■ To recall a preset station
Press the PRESET (
or
) button for less than 0.5
seconds to select the desired station.
■ To scan the preset station
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1� Press the PRESET (
or
) button for more than
0.5 seconds. The preset number will flash and the
programmed stations will be tuned in sequentially,
for 5 seconds each.
Each time the RDS DISP button is pressed, the display
will switch as follows:
2� Press the PRESET (
or
) button again when
the desired station is located.
Station name (PS)
Programme type (PTY)
Frequency
Radio text (RT)
■ To erase entire preset memory
1� Press and hold the CLEAR button until “TUN CLR”
appears then press MEMORY button.
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
E-
NO PS
NO PTY
FM 98.80 MHz
NO RT
Using the Radio Data System (RDS) (continued)
■ Using the Auto
Memory (ASPM)
Station
Programme
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1� Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2� Press and hold down the RDS ASPM button on the
remote control for at least 3 seconds.
1. After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
2. When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
● When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
● “NO PS”, “NO PTY” or “NO RT” will flash for about
5 seconds, and then the frequency will be displayed.
Notes for radio text:
● The first 8 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
● If you tune in to an RDS station which is not
broadcasting any radio text, “NO RT” will be displayed
when you switch to the radio text position.
● Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
■ To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme type
(news, sports, traffic programme, etc.) from the stations in
memory.
1� Press the TUNER button on the remote control
or FUNCTION button on the main unit repeatly to
select TUNER function.
2� Press the RDS PTY button on the remote control.
3. After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
Selected PTY code (blinking) will appear for about 6
seconds.
� Within 6 seconds, press the
select the PTY code.
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for
stations. The stations which are already stored in memory
will be kept there.
Notes:
● If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
● Any station which has the same frequency as the one
stored in memory will not be stored.
● If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
● If no station have been stored in memory, “00 MEM”
and “END” will appear for about 4 seconds.
● If the RDS signals are very weak, station names may
not be stored in memory.
● The same station name can be stored in different
channels.
● In a certain area or during certain time periods, the
station names may temporarily be different.
■ Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
● “PS”, “NO PS” and a station name appear alternately,
and the unit does not operate properly.
● If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
or
button to
Each time the button is pressed, the PTY code will
appear.
� Whilst the selected PTY code is displayed (within 6
seconds), press the RDS PTY button again.
● The unit searches the all preset stations and stops
when it finds a station of the selected category
then tunes into the stations. The RDS indicator
lights up.
● If no programme is found in the all preset stations,
“NO FOUND” appear on the display and returns to
the previous station.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type,
the corresponding channel number will lit for about
4 seconds, and then the station name will remain it.
● If you want to listen to the same programme type
of another station, press the RDS PTY button and
start again from step 2. The unit will look for the next
station.
E-10
Setting the clock (Remote control
only)
Timer and sleep operation (Remote
control only)
Timer playback:
The unit turns on and plays the desired source (CD, USB,
TUNER or AUDIO IN) at a preset time.
■ Timer playback
Before setting timer:
1� Check that the clock is set to the correct time
(refer to the column on the left). If it is not set,
you cannot use the timer function.
In this example, the clock is set for the 24-hour (00:00)
display.
2� For timer playback, load the disc to be played
back.
1� Press the ON/STAND-BY button to turn to stand1� Press the ON/STAND-BY button to turn the power
by mode.
on.
2� Press and hold the CLOCK/TIMER button until
2� Press the CLOCK/TIMER button for about 2
“00:00” appear.
seconds.
� Within 10 seconds, press the
or
button
to select “ONCE” or “DAILY” and then press the
MEMORY button.
� Within 10 seconds, press the
or
button
to adjust the hour and then press the MEMORY
button. Press the
or
button once to advance
the time by 1 hour. Hold it down to advance
continuously.
� Press the
or
button to adjust the hours for
timer on and then press the MEMORY button.
� Press the
or
button to adjust the minutes
and then press the MEMORY button. Press the
or
button once to advance the time by 1 minute.
Hold it down to advance continuously.
5� Press the
or
button to adjust the minutes for
timer on and then press the MEMORY button.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button. The time display will
appear for about 10 seconds.
� Press the
or
button to adjust the timer off
(as in step 4 and 5) and then press the MEMORY
button.
[When the power is on]
Press the CLOCK/TIMER button. The time display will
appear for about 4 seconds.
Note:
The “00:00” will appear when the AC power supply is
restored after a power failure or unplugging the unit. If
incorrect, readjust the clock as follows.
� To select the timer playback source (CD, TUNER,
To readjust the clock:
Perform “Setting the clock” from step 1.
E-11
USB or AUDIO IN), press the
or
button. Press
the MEMORY button.
When you select tuner, select a station by pressing
the
or
button, and then press the MEMORY
button. If a station has not been programmed, “NO
P-SET” will be displayed and timer setting will be
canceled.
Timer and sleep operation (Remote control only) (continued)
� Adjust the volume using the VOLUME + or VOLUME – and
then press the MEMORY button. (Do not turn the volume
up too high).
� Press the ON/STAND-BY button to enter the power
stand-by mode. The TIMER red indicator lights up and
the unit is ready for timer playback.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1� Set the sleep time (refer to the column on the left,
steps 1 - 5).
10�When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The “ ” indicator will blink during timer
playback.
Checking the timer setting:
Press the CLOCK/TIMER button repeatedly to view as
follows:
2� Whilst the sleep timer is set, set the timer playback
(steps 2 - 8, pages 10 - 11).
Sleep timer
setting
Timer playback
setting
5 - 120 minutes
Sleep operation will
automatically stop
Cancelling the timer setting:
Press the CLOCK/TIMER button until “ONCE” or “DAILY”
appears then press MEMORY button. The unit display
“OFF”.
Note:
After selecting the volume level and press the MEMORY
button to confirm, it will change to last function.
■ Sleep operation
The radio, compact disc and USB can all be turned off
automatically.
1� Play back the desired sound source.
2� Press the SLEEP button.
� Within 5 seconds, press the SLEEP�������������������
������������������������
button repeatedly
to select the time.
SLP 120
90
60
30
15
10
5
� “SLEEP” will appear.
5� The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
To confirm the remaining sleep time:
Whilst “SLEEP” is indicated, press the SLEEP button. The
remaining time is displayed for about 10 seconds.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
Whilst “SLEEP” is indicated, press the SLEEP button
repeatedly until SLEEP indicator disappears.
E-12
End time
Desired time
Timer playback
start time
Enhancing your system
Troubleshooting chart
The connection cord is not included. Purchase a
commercially available cord as shown below.
Many potential problems can be resolved by the owner
without calling a service technician. If something is wrong
with this product, check the following before calling your
authorized SHARP dealer or service center.
■ General
Symptom
Possible cause
● The clock is not ● Did a power failure occur?
set to the correct
Reset the clock. (Refer page
time.
11)
Portable audio
player, etc.
● When a button is ● Set the unit to the power
pressed, the unit
stand-by mode and then turn
does not respond.
it back on.
● If the unit still malfunctions,
reset it. (Refer page 14)
Audio cable
(not supplied)
■ Listening to the playback sounds of
portable audio player, etc.
1� Use a connection lead to connect the portable
audio player etc. to the AUDIO IN socket.
● No sound is heard. ● Is the volume level set to
“MIN”?
● Are the headphones connected?
● Are the speaker wires disconnected?
2� Press the ON/STAND-BY button to turn the power
on.
� Press the AUDIO IN button on the remote control
or FUNCTION button repeatedly on main unit to
select AUDIO IN function.
� Play the connected equipment. If volume level of
the connected device is too high, sound distortion
may occur. Should this happen, lower the volume
of the connected device. If volume level is too low,
increase the volume of the connected device.
Note:
To prevent noise interference, place the unit away from the
television.
■ Headphones
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphone,
reduce the volume.
● Be sure your headphone has a 3.5 mm (1/8”) diameter
plug and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
● Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
■ CD player
Symptom
Possible cause
● Playback
does ● Is the disc loaded upside
not start.
down?
● Playback stops ● Does the disc satisfy the
in the middle or
standards?
is not performed ● Is the disc distorted or
properly.
scratched?
● Playback sounds ● Is the unit located near
are skipped, or
excessive vibrations?
stopped in the ● Is the disc very dirty?
middle of a track. ● Has condensation formed
inside the unit?
■ Remote control
Symptom
Possible cause
● The remote control ● Is the AC power lead of the
does not operate.
unit plugged in?
● Is the battery polarity
correct?
● Is the battery dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong light?
■ Tuner
Symptom
Possible cause
● The radio makes ● Is the unit placed near the TV
or computer?
unusual
noises
continuously.
● Is the FM aerial placed
properly?
Move the aerial away from
the AC power lead if it is
located nearby.
E-13
Troubleshooting chart (continued)
■ USB
Symptom
■ Factory reset, clearing all memory
1� Press the ON/STAND-BY button to enter the power
Possible cause
stand-by mode.
● Device cannot be ● Is there any MP3/WMA file
detected.
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
2� Press down the VOLUME + button and
button
on main unit until “CLR ALL” appears.
● Playback does not ● Is it a copyright protected
start.
WMA file?
● Is it a false MP3 file?
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD program.
● Wrong time display. ● Is Variable Bitrate file
● Wrong file name
being played back?
display.
● Is the File Name written
in Chinese or Japanese
characters?
■ Care of compact discs
■ Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter
on the remote control. Condensation can cause the unit
to malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■ Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD
in the disc tray. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can damage
the unit.
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on
the disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt,
or water on the CDs can cause noise or mistracking.
If a CD is dirty or does not play properly, clean it with
a soft, dry cloth, wiping straight out from the centre,
along the radius.
NO
YES
Correct
■ If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1� Set the unit to the stand-by mode and turn the
power on again.
2� If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn
the power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
Maintenance
■ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
E-14
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■ General (XL-E1H)
■ USB
USB host
interface
● Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage Class.
● Support Bulk only and CBI
protocol.
Support file
● MPEG 1 Layer 3
● WMA (Non DRM)
Power source
AC 220 - 240 V ~ 50/60 Hz
Power consumption
Power on: 21 W
Power stand-by: 0.4 W (*)
Bitrate support
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
Dimensions
Width: 190 mm (7 - 1/2”)
Height: 115.7 mm (4 - 9/16”)
Depth: 230.4 mm (9 - 1/16”)
Other
Weight
2.4 kg (5.31 lbs.)
● Maximum total number of MP3/
WMA files is 999.
● Maximum total number of folders is
99 INCLUSIVE of root directory.
● The ID3TAG information supported
are TITLE, ARTIST and ALBUM
only.
● Supports ID3TAG version 1 and
version 2.
File system
support
● Support USB devices with Microsoft Windows/DOS/FAT 16/FAT 32.
● 2 kbyte block length for sector.
■ General (XL-UH05H)
Power source
AC 220 - 240 V ~ 50/60 Hz
Power consumption
Power on: 16 W
Power stand-by: 0.4 W (*)
Dimensions
Width: 190 mm (7 - 1/2”)
Height: 115.7 mm (4 - 9/16”)
Depth: 230.4 mm (9 - 1/16”)
Weight
2.08 kg (4.60 lbs.)
■ Tuner
(*)This power consumption value is obtained when the
main unit is in stand-by mode.
■ Amplifier (XL-E1H)
Output
power
MPO: 18 W (9 W + 9 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (1% T.H.D.)
Output
terminals
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Frequency range
■ Speaker (XL-E1H)
Type
1-way type speaker system
8 cm (3”) Full range
Maximum input
power
10 W
Rated input power
5W
Impedance
4 ohms
Dimensions
Width: 111 mm (4 - 3/8”)
Height: 194 mm (7 - 5/8”)
Depth: 180 mm (7 - 1/16”)
Weight
1.3 kg (2.8 lbs.)/each
■ Amplifier (XL-UH05H)
Output
power
MPO: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 7 W (3.5 W + 3.5 W) (10% T.H.D.)
RMS: 6 W (3 W + 3 W) (1% T.H.D.)
Output
terminals
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
■ CD player
Type
Single disc multi-play compact
disc player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter
Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
FM: 87.5 - 108 MHz
■ Speaker (XL-UH05H)
Type
1-way type speaker system
8 cm (3”) Full range
Maximum input
power
5W
Rated input power
2.5 W
Impedance
4 ohms
Dimensions
Width: 111 mm (4 - 3/8”)
Height: 194 mm (7 - 5/8”)
Depth: 105 mm (4 - 1/8”)
Weight
0.78 kg (1.72 lbs.)/each
E-15