93 - Honda

Table of Contents
▼
▲
Main Menu
Climate Control System
Fully-automatic Operation
Auto Button
To put the Automatic Climate
Control in fully-automatic mode,
press the AUTO button and set the
desired temperature by turning the
temperature control dial. You will
see AUTO in the system's display.
The light above the
button
also shows you which mode,
Recirculation or Fresh Air, is
selected.
When the system is in fully
automatic mode, the auto idle stop
function will not be activated.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature from its current level to
the set temperature.
Comfort and Convenience Features
TEMPERATURE
CONTROL DIAL
FAN SPEED BUTTON
MODE BUTTON
ECON BUTTON
OFF BUTTON
When you set the temperature to its
lower limit (60°F/18°C) or its upper
limit (90°F/32°C), the system runs
at full cooling or heating only. It does
not regulate the interior temperature.
When the temperature is set
between the lower and upper limits,
the system regulates the interior
temperature to the set value.
AUTO BUTTON
In cold weather, the fan will not
come on automatically until the car
has been driven for a short time and
the heater starts to develop warm air.
Table of Contents
▼
▲
Main Menu
Climate Control System
Pressing the OFF button shuts the
climate control system completely
off. Keep the system completely off
only for short periods. To keep stale
air and mustiness from collecting,
you should have the fan running at
all times.
TEMPERATURE
CONTROL DIAL
FAN SPEED BUTTON
MODE BUTTON
Semi-automatic Operation
You can manually select various
functions of the Climate Control
system when it is in AUTO. All other
features remain automatically
controlled. Making any manual
selection causes the word AUTO to
go out.
ECON BUTTON
RECIRCULATION BUTTON
ECON Button
This button turns the air
conditioning on and off. When the
air conditioning is turned on with
this button, the auto idle stop works
only if the outside temperature is
above 41°F (5°C).
If the cooling provided in ECON
mode is not adequate, press the Auto
button. (See page 92 .)
CONTINUED
Comfort and Convenience Features
Table of Contents
Climate Control System
Recirculation Button
This button controls the source of
the air going into the system. When
the indicator above this button is lit,
air from the car's interior is sent
through the system again (Recirculation mode). When the indicator is off,
air is brought in from outside the car
(Fresh Air mode).
You can, for example, manually put
the system in recirculation mode
when driving through an area of
smoke or fumes.
TEMPERATOR
CONTROL DIAL
FAN SPEED BUTTON
ECON BUTTON
MODE BUTTON
RECIRCULATION BUTTON
Fan Speed Button
You can manually select the fan
speed with the fan speed button.
Pressing the button repeatedly
makes the fan run faster. The fan
speed is shown by bars in the display.
If the fan is at its highest speed,
pressing the button again takes it to
its lowest speed.
Comfort and Convenience Features
▼
▲
Main Menu
Download PDF
Similar pages