NEC ST-EX2023 User's manual

ST-EX2023

English

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Deutsch

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Italiano

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

简体中文

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Installation Instructions / Instructions d'installation / Montageanweisung /Instrucciones de instalación /

Istruzioni di installazione / 取扱説明書 / 安装说明书

Français

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

Español

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

日本語

Materials included in package

1. ST-EX2023 with attachment foot for EX201W x 1

2. Attachment foot for EX231W or EX231Wp x 1

3. Rubber feet x 2

4. Quick Start Guide x 1

English

1

1

A

2

Français

2

3

3 4

B

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp) by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious damage to the monitor.

For EX201W

For EX201W user: Proceed to step instruction.

3 .

For EX231W or EX231Wp user: Change attachment foot following the below

1 Press Quick Release Button A and pull out the attachment foot.

2 Attach the attachment foot with "23 only".

Weight: ??

For EX231W / EX231Wp

3 1) Turn off the power to the monitor.

2) Paste two rubber feet B on the bottom of the monitor.

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys.Put the upper hooks of the stand in the slot of the monitor then push stand into monitor in direction of the arrow as shown and confirm that the stand is locked. Open the stand with widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Weight: ??

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

Unit: mm

Deutsch

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp) by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious damage to the monitor.

For EX201W

For EX201W user: Proceed to step instruction.

3 .

For EX231W or EX231Wp user: Change attachment foot following the below

1 Press Quick Release Button A and pull out the attachment foot.

2 Attach the attachment foot with "23 only".

Poids: ??

For EX231W / EX231Wp

3 1) Turn off the power to the monitor.

2) Paste two rubber feet B on the bottom of the monitor.

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys.Put the upper hooks of the stand in the slot of the monitor then push stand into monitor in direction of the arrow as shown and confirm that the stand is locked. Open the stand with widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Poids: ??

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

Unité: mm Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp) by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious damage to the monitor.

For EX201W

For EX201W user: Proceed to step instruction.

3 .

For EX231W or EX231Wp user: Change attachment foot following the below

1 Press Quick Release Button A and pull out the attachment foot.

2 Attach the attachment foot with "23 only".

Gewicht: ??

For EX231W / EX231Wp

3 1) Turn off the power to the monitor.

2) Paste two rubber feet B on the bottom of the monitor.

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys.Put the upper hooks of the stand in the slot of the monitor then push stand into monitor in direction of the arrow as shown and confirm that the stand is locked. Open the stand with widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

Gewicht: ??

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

Einheit: mm

Español Italiano

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp) by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious damage to the monitor.

For EX201W

For EX201W user: Proceed to step instruction.

3 .

For EX231W or EX231Wp user: Change attachment foot following the below

1 Press Quick Release Button A and pull out the attachment foot.

Peso: ??

For EX231W / EX231Wp

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet B on the bottom of the monitor.

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys.Put the upper hooks of the stand in the slot of the monitor then push stand into monitor in direction of the arrow as shown and confirm that the stand is locked. Open the stand with widely extended until feeling a "click" feeling.

Peso: ??

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

Unidad: mm Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp) by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious damage to the monitor.

For EX201W

For EX201W user: Proceed to step instruction.

3 .

For EX231W or EX231Wp user: Change attachment foot following the below

1 Press Quick Release Button A and pull out the attachment foot.

Peso: ??

For EX231W / EX231Wp

2 Attach the attachment foot with "23 only".

3 1) Turn off the power to the monitor.

2) Paste two rubber feet B on the bottom of the monitor.

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys.Put the upper hooks of the stand in the slot of the monitor then push stand into monitor in direction of the arrow as shown and confirm that the stand is locked. Open the stand with widely extended until feeling a "click" feeling.

Peso: ??

To reattach the stand, please refer to monitor's user's manual.

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

Unità: mm

日本語 简体中文

For EX201W

Weight: ??

For EX231W / EX231Wp

Weight: ??

単位 : mm

Installing stand:

You use this stand for both size 20" (EX201W) and 23" (EX231W/EX231Wp) by change attachment foot.

CAUTION: Do not use this stand for EX201W with attachment foot for

EX231W/EX231Wp. It may cause monitor fall down and make serious damage to the monitor.

For EX201W

For EX201W user: Proceed to step instruction.

3 .

For EX231W or EX231Wp user: Change attachment foot following the below

1 Press Quick Release Button A and pull out the attachment foot.

2 Attach the attachment foot with "23 only".

重量 : ??

For EX231W / EX231Wp

3 1) Turn off the power to the monitor.

2) Paste two rubber feet B on the bottom of the monitor.

3) Place monitor face down on a non-abrasive surface.

NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys.Put the upper hooks of the stand in the slot of the monitor then push stand into monitor in direction of the arrow as shown and confirm that the stand is locked. Open the stand with widely extended until feeling a "click" feeling.

To reattach the stand, please refer to monitor's user's manual.

重量 : ??

Before using:

Use this stand with widely extended until feeling a "click" feeling.

CAUTION: Improper setting may cause the monitor fall down and make serious damage to the monitor.

Human Sensor position is below as normal stand. Please make sure there is no object in front of Human Sensor.

Be sure to observe the cautions described in the monitor's operating manual when handling the monitor.

单位 : mm