Register your product and get support at
www.philips.com/welcome
CED780
EN
User manual
3
ES-AR
Manual del usuario
41
PT-BR
Manual do Usuário
87
1 Important
Safety
Notice
2 Your in-car entertainment system
Introduction
What's in the box
Overview of the main unit
Overview of the remote control
3 Get started
Install the car audio
Mount into the dashboard
Attach the front panel
Install remote control battery
Turn on
Set date and time
4 Play audio/video/picture
Load discs
Connect USB device
Insert SD/MMC card
Play/Pause
Browse
Skip to a chapter/title/time
Select audio track
Select subtitle language
Change view angle
Repeat one/all chapter
Random play
Select audio mode
View photo
5 Listen to radio
Tune to a radio station
Store radio stations in memory
Tune to a preset station
6 Use navigation system
Insert map card
Use map
5
5
5
7
7
8
9
10
12
12
15
16
16
17
17
18
18
19
19
20
20
20
21
21
21
21
22
22
22
23
23
23
24
24
24
24
7 Play with Bluetooth device
Adjust microphone position
Pair the Bluetooth-enabled devices
Make a call
Receive call
Bluetooth phone book settings
Favorite call
Adjust Bluetooth settings
Listen to music from Bluetooth device
8 Play iPod
25
25
25
27
27
28
28
28
29
29
29
30
30
30
Compatible iPod/iPhone/iPad
Listen to the iPod/iPhone/iPad
Search for a track
Charge the iPod/iPhone/iPad
9 Adjust sound
31
31
31
31
31
32
32
32
32
Adjust volume
Mute
Select preset equalizer
Adjust fader/balance/subwoofer
Switch music listening zone
Turn FullSound on/off
Turn MAX sound on/off
Turn DBB on/off
10 Adjust settings
33
33
33
33
34
34
Display system setup menu
Adjust general settings
View Info settings
Adjust Navigation settings
Adjust Bluetooth settings
11 Others
35
35
35
35
35
36
36
37
Adjust brightness
Set rear view camera
Adjust display design
Listen to other devices
Detach the front panel
Reset
Replace fuse
EN
3
E n g lis h
Contents
12 Product information
USB playability information
13 Troubleshooting
About the Bluetooth device
4
EN
37
38
39
39
Safety
Notice
Read and understand all instructions
before you use the device. If damage is
caused by failure to follow instructions, the
warranty does not apply.
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
The device is designed for negative ground
(earth) 12 V DC operation only.
not watch video when driving.
To ensure safe driving, adjust the volume to
a safe and comfortable level.
Improper fuses can cause damage or
consult a professional.
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuits, do not expose the
device, remote control or remote control
batteries to rain or water.
The device shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
candles).
Never insert objects into the ventilation
slots or other openings on the device.
Never place any objects other than discs
into the disc tray/slot.
To avoid exposure to laser radiation, do
not disassemble the device.
Risk of damage to the screen! Never touch,
push, rub or strike the screen with any
object.
Never use solvents such as benzene,
thinner, cleaners available commercially, or
anti-static sprays intended for discs.
Clean the device with soft, damp cloth.
Never use substances such as alcohol,
chemicals or household cleaners on the
device.
E n g lis h
1 Important
The making of unauthorized copies of copyprotected material, including computer
"
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips is
under license.
Windows Media and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
#
#
the developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that
the use of this accessory with iPod or iPhone
may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
EN
5
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
$%
&*
%® device that plays DivX video. Visit
divx.com for more information and software
&*
ABOUT DIVX VIDEO-ON-DEMAND: This
&*%® device must be registered
in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
DivX®&*%® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are those
of their respective owners.
This apparatus includes this label:
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
6
EN
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
;
"
"
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2011 © Koninklijke Philips Electronics N.V. All
rights reserved.
<
=
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
2 Your in-car
entertainment
system
E n g lis h
Disposal of your old product and
batteries
Congratulations on your purchase, and
=
"#>"
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the car entertainment system, you can
Quickly found routine through the
navigation system
And you can also enjoy:
Audio/video/JPEG pictures from
DVD, VCD or CD
USB devices
SD/SDHC/MMC cards
iPod/iPhone
External devices
FM or AM (MW) radio
Audio from Bluetooth-enabled devices
Besides, you can make/receive phone calls with
Bluetooth-enabled devices.
EN
7
f Audio and Video cable
What's in the box
g Hexagon head screw
Check and identify the contents of your
package:
h Screws
- M4x8mm (x4)
a
i Remote control battery
b
j Rubber cushion
k User manual
l Quick start guide
c
d
e
f
g
h
i
j
k
l
a Main unit and front panel (with a sleeve)
b Remote control
c Trim plate
d Carrying case for front panel
e ISO standard connector
8
EN
E n g lis h
Overview of the main unit
ab c d
e
g
f
h
i
j
k
o
n
m
l
q
a OPEN
Open/Close TFT screen.
b
Press to answer or redial a call.
Press and hold to transfer call.
c
/
Turn the unit on or off.
%"
Mute or unmute sound.
Rotate to adjust volume.
d BAND
Select tuner band.
p
e +/-PRESET
Select preset radio station.
Search for track/folder.
f DISP
Adjust dimmer settings.
Press and hold to turn off display.
g
TILT
Adjust position of the screen.
h
Eject disc.
i NAVI
Enter GPS navigation system or exit.
EN
9
j AV IN
External audio/video socket.
k
Overview of the remote
control
Unlock the panel.
a
b
c
d
l
USB socket.
m SOURCE
Select source.
n
Press to terminate call.
o
e
~
}
|
f
g
h
i
{
/
Tune for radio station.
Skip/search for track.
Fast backward/forward playback.
z
y
j
k
x
l
p RESET
Reset the unit when it hangs up.
w
v
u
m
n
q SD/SDHC/MMC card slot
t
o
s
p
r
q
a
Turn the unit on or off.
b NAVI
Enter GPS navigation system or exit.
c SOURCE
Select source.
d
Mute or unmute sound.
e BAND
Select tuner band.
f VOLUME +/ Adjust volume.
g SUBTITLE
Select DVD or DivX subtitle language.
10
EN
Turn maximizing sound on or off.
i DVD MENU
Access DVD main menu.
/
Skip to previous/next track/chapter.
Move cursor to left/right.
E n g lis h
x
h
y
View the clock.
j
Turn full sound on or off.
z DVD AUDIO
Select audio language or audio channel.
Return to previous menu or exit.
{ TOP MENU
Return to top menu.
k
l DBB
Turn Dynamic Bass Boost (DBB) sound
on or off.
| TILT +/ Adjust position of the screen.
m EQ
Access audio setting menu.
}
n
~ DISP
Adjust dimmer settings.
Press and hold to turn off display.
Turn the screen blackout mode on or
off.
Unlock the panel.
o ZONE
Switch music listening zone.
p
Select video channel.
q
Answer phone.
Dial or redial number.
r
Terminate call.
s
Browse photos.
t
Switch to music playing mode.
u
/
Skip to previous/next preset station.
Skip to previous/next folder.
Search backward/forward for DVD
video.
Move cursor up/down.
v
Start play or pause.
w OK
%"
EN
11
3 Get started
Caution
Notes on speaker connection
Never connect speaker wires to the metal
body or chassis of the car.
Never connect speaker wires with stripes
to one another.
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Install the car audio
Connect wires
Caution
Ensure that all loose leads are insulated with electrical
tape.
1
Check the car's wiring carefully, then
connect them to the supplied ISO wires.
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
This unit is designed for negative ground (earth) 12 V
DC operation only.
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
To avoid short-circuit: before you connect, ensure that
the ignition is off.
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
Ensure that all loose leads are insulated with electrical
tape.
Ensure that the leads do not get caught under screws
or in moving parts (e.g. seat rail).
Ensure that all ground (earth) leads are connected to a
common ground (earth) point.
Use only the supplied mounting hardware for a safe
and secure installation.
?"
"
need to change the fuse, consult a professional.
Note on the power supply lead (yellow)
When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value of
all the connected devices.
12
EN
Connector
Connect to
1
Yellow wire
2
Blue/White
wire
The +12V car battery
which is live at all times.
The electric antenna control
lead or power supply lead
of the antenna booster. If
there is no electric antenna
or antenna booster, or
it is manually operated
telescopic antenna, it is
unnecessary to connect
this lead.
Connect to
Black wire
A metal surface of the car.
Connect the black ground
(earth) lead before connect
the yellow and red power
supply leads.
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch. If
there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Ensure
that black ground (earth)
lead is connected to a metal
Left speaker (Rear)
4
Red wire
5
Green and
green/black
wires
White and
white/black
wires
Gray and
gray/black
wires
Purple and
purple/
black wires
6
7
8
2
Note
E n g lis h
3
Connector
The video blocking system under parking brake not
engaged only control the display of this unit, and will
not affect the video output through the rear RCA
video output.
If watch moving video from disc or AV-IN source but
parking brake is not properly connected, the video
signal will be blocked by the system, and the below
display will be shown on TFT:
Left speaker (Front)
Right speaker (Front)
Right speaker (Rear)
Connect the other end of the supplied
standard connector to the car audio
system.
Caution
To avoid any accident, the driver must not watch video
while driving. This unit is designed to not allow watching
moving video while driving. Park your car in a safe place
and engage the parking brake before watching moving
video.
EN
13
23
22
21
20
1
5
6
2
3
4
14
8
7
EN
9 0! " § $ % & / 18
19
3
4
5
6
Pink wire
2.5m
extension
wire (not
included)
Brake switch
Ground
Purple wire
Extension wire
Parking brake (-)
8
Gearbox
switch
Reverse gear
signal
ISO wires
9
10
Yellow cable
Red cable
11
White cable
12
Red cable
7
13
White cable
14
15
16
17
18
19
20
21
Red cable
White cable
Yellow cable
Brown cable
Blue cable
White wire
Black wire
Black wire
22
Black wire
23
Black wire
Mount into the dashboard
E n g lis h
Connect to/with
Note
Check wire connection before you mount the unit
into a car.
If preset radio stations are lost when the ignition key is
turned off and then turned on, reconnect the red leads
crosswise to the yellow ones.
Reverse camera
(B+)
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
If the car battery is not disconnected,
to avoid short-circuit, ensure that the
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
Back lamp lead +
Connected in step
1 above
Video out
Rear line out
(Right)
Rear line out
(Left)
Front line out
(Right)
Front line out
(Left)
Audio in (Right)
Audio in (Left)
Video in
Camera in
Subwoofer
OE remote
Radio antenna
External
microphone
TV ready/DAB
ready
GPS smart
antenna
m
5m
183
mm
53mm
1
2
Connector/
Object
Since the unit cannot be used if the
slant angle of dashboard opening is
above 20 degrees, ensure that the
horizontal slant of the dashboard
opening is between 0 and 20 degrees.
EN
15
3
When installing in a shallow space, change
the position of slide brackets.
Note
?Z
=
sleeve, skip this step.
Attach the front panel
4
5
1
Attach the trim plate.
2
Insert the left side of the panel in the
chassis until it is correctly engaged.
3
Press the right side of the panel until the
mechanism locks it into place.
Place the supplied rubber cushion over the
end of the mounting bolt.
Install the sleeve into the dashboard and
=Z
Slide the unit into the dashboard until you
hear a click.
Install remote control battery
Caution
Risk of explosion! Keep battery away from heat,
[
16
EN
Set date and time
E n g lis h
Note
$"\"
=
not to be used for a long time.
Battery contain chemical substances. It should be
1
Tap
to display main menu.
2
Tap
to display the full menu.
3
Tap .
» The setup menu is displayed.
disposed of properly.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Turn on
Caution
Risk of road accidents! Never watch videos or adjust
settings while you drive.
1
Press to turn the unit on.
» The available OSD (On-Screen
Display) languages are displayed.
2
=
» The OSD language is changed to the
selected language immediately.
To turn the unit off, press and hold
for three seconds.
EN
17
4
Tap .
» The date/time setup menu is displayed.
4 Play audio/
video/picture
Load discs
5
6
7
Tap on [Date], [Clock Mode] or [Time].
Tap
or
to set date/time.
When date/time is set, tap
main menu.
to return to
You can play video, audio or images stored on
the following discs:
DVD video, DVD-R, DVD-RW
VCD
Audio CD, CD-R, CD-RW
1
Insert the disc into the disc slot with label
side facing up.
» The disc starts playing automatically.
2
To remove the disc, press the button.
» When the disc is ejected, the unit
switches to the previous source,
if connected. Otherwise, the
unit switches to [Radio] mode
automatically.
Note
Supported region code depends on where you bought
the car audio system.
Countries where you
bought the unit
China
;#
=
Korea
18
EN
Supported DVD
region code
Insert SD/MMC card
E n g lis h
Latin America
Note
Russia, India
This device supports Secure Digital High Capacity
(SDHC) card.
Connect USB device
1
Detach the front panel. (see 'Detach the
front panel' on page 36)
2
Insert the SD/MMC card into SD/MMC
card slot.
» Play starts automatically.
Note
Ensure that the device contains playable content.
1
2
Push the USB socket cover upside.
Insert the USB device into the USB slot .
» "
Remove SD/MMC card
3
1
2
Switch to another source.
3
Remove the SD or MMC card.
Press the card until you hear a click.
» The card is now disengaged.
To remove the USB device, switch the car
"
take off the USB device.
» When USB device is disconnected, it
plays the previous source.
EN
19
Play/Pause
1
2
3
4
Once a disc, USB or SD/MMC card is
inserted, play starts automatically.
For DVD movie, if a menu appears,
press to start play.
To pause, tap .
To resume play, tap
again.
To skip forward/backward, tap
or
4
5
$
Tap on the name to start play.
To fast forward/backward, tap and hold
or .
Tap
to return to playlist menu.
Tap one of the icons below to select
]^
: to display all available audio folders/
tracks.
: to display all available picture
]
: to display all available video
]
EN
1
During play, tap anywhere except for the
upper left corner to display the control bar.
2
Tap
on the left lower corner of the
screen.
» The second control bar is displayed.
.
During play from USB device or SD card, you
can browse through the listed audio/video or
or watching.
20
Drag along the search bar to display the
alphabet pop-up.
Skip to a chapter/title/time
Browse
1
2
3
Tap .
» The search screen is displayed.
Tip
E n g lis h
3
You may also press SUBTITLE on the remote control
repeatedly to select subtitle language.
Change view angle
4
Tap the numbers to enter track number,
then tap [OK].
To clear the previous input, tap .
To clear all input, tap .
Some DVDs contain alternate scenes, such
as scenes recorded from different camera
angles. For such DVDs, you can select available
alternate scenes.
Press TILT repeatedly on the front panel.
» The view angle is changed.
Repeat one/all chapter
Select audio track
For video discs that contain two or more audio
tracks.
1
During play, tap anywhere except for the
upper left corner to display the control bar.
2
Tap
repeatedly to select audio track.
» The audio channel information is
displayed on upper line of the screen.
Tip
You can also press DVD AUDIO on the remote
control repeatedly to change audio track.
Select subtitle language
For DVD or DivX discs that contain two or
more subtitle languages.
1
During play, tap anywhere except for the
upper left corner to display the control bar.
2
Tap repeatedly to select a language.
» The selected language is displayed.
During play, you can select different repeat play
modes.
For DVD/VCD movie disc:
1
Tap anywhere except for the upper left
corner to display the control bar.
2
3
Tap
to display the second menu.
Tap to select:
[Rep: chapter]: play the current
chapter repeatedly.
[Rep: title]: play all chapters in the title
repeatedly.
[Rep: disc]: cancel repeat play.
For VCD karaoke:
Tap to select:
[Rep: one]: play the current track
repeatedly.
[Rep: disc]: cancel repeat play.
Tap on the upper line of the screen to select:
: play the current track repeatedly.
: play all tracks in the current folder
repeatedly.
: cancel repeat play.
EN
21
Random play
3
Tap on a picture to view it in full screen.
_
]"
During play, tap
repeatedly to turn random
play on or off.
(red): start random play.
(gray): cancel random play.
Select audio mode
When you play VCDs, you can select an audio
mode (R/L/Stereo).
1
During play, tap anywhere except for the
upper left corner to display the control bar.
2
Tap
repeatedly until the preferred audio
mode is selected.
Tip
You can also press
on the remote control to view
picture list.
Zoom
View photo
1
Tap .
» Thumbnail view of the pictures is
displayed.
You can zoom in pictures for a close view.
1
During view pictures, tap anywhere except
for the upper left corner to display the
control bar.
2
Tap repeatedly to zoom in/out the
picture.
Rotate pictures
2
Drag the bar downward to view all
pictures.
22
EN
1
During view pictures, tap anywhere except
for the upper left corner to display the
control bar.
2
Tap
repeatedly to rotate the picture.
[Local]: stations with strong and weak
signals can be broadcast.
E n g lis h
5 Listen to radio
Tune to a radio station
1
2
Tap
to display home menu.
Tap .
» Band and frequency information is
displayed.
Store radio stations in
memory
You can store up to 6 stations in each band.
Store stations manually
3
4
Tap FM or AM to select band:
FM band options: FM1, FM2, FM3
AM band options: AM1, AM2
`\ or to tune to a radio
station by step.
Tap or for over one second to
tune to a radio station automatically.
Tip
You can also press BAND on the front panel or
remote control repeatedly to select the band.
Select radio range
Before you start to search for radio stations,
you can select radio range.
1
2
Tap
1
2
3
Select band.
Tune to the station by tapping
or
.
Tap and hold one of the channels 1 to 6
over two seconds.
» The station is saved under the selected
channel.
Store stations automatically
You can search for a station with intro search,
which broadcasts a 10-second preview of each
detected radio station.
1
2
3
Select band.
Tap
.
Tap [Auto Store].
» Auto search starts. The six strongest
stations of the selected band are saved
in preset channels 1-6 automatically.
.
Tap [Radio Range] to toggle tuner
sensitivity from normal to high sensitivity.
[Distance]: only stations with strong
signals can be broadcast.
EN
23
Tune to a preset station
1
2
Select band.
6 Use navigation
system
Tap one of the preset channels (1 to 6) to
select a preset station.
Insert map card
Note
Navigation map card is not included in the packaging of
the car entertainment system.
1
2
3
Press OPEN to release the panel.
Open the card door under the screen.
Insert the map card into the map card slot.
GPS Card
4
5
Close the card door.
Attach the front panel.
Tip
You can press NAVI to enter/exit the navigation system.
Use map
Note
You might need to upgrade the navigation map (sold
separately) before using it. See "Upgrade the map"
section.
24
EN
3
Tap
to display main menu.
Tap .
» The navigation menu is displayed in a
few seconds.
Refer to the user manual of the navigation
map to operate the navigation tool.
7 Play with
Bluetooth
device
E n g lis h
1
2
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetoothenabled device.
Adjust microphone position
For better sound quality in make/receive phone
call through Bluetooth, place the microphone
near the mouth.
1
Make sure the supplied microphone is
connected to the car audio system. (See
"Connect wires" section).
2
Place the microphone at a proper location.
For example,
Stick it onto the dashboard.
Or, clip it on the sun-shield.
Pair the Bluetooth-enabled
devices
To connect your Bluetooth device to the unit,
you need to pair the device to the unit. Pairing
needs only to be done once.
You can pair up to eight devices.
EN
25
Note
The operational range between this unit and a
3
4
Bluetooth device is approximately 10 meters (30 feet).
Before you connect a Bluetooth device to this unit,
familiarize yourself with the Bluetooth capabilities of
the device.
Compatibility with all Bluetooth devices is not
guaranteed.
Any obstacle between this unit and a Bluetooth device
can reduce the operational range.
Keep this unit away from any other electronic device
that may cause interference.
Select "PH780" in the pairing list.
Enter default password "0000".
» If the pairing succeeds, the dial screen
is displayed.
Disconnect Bluetooth devices
1
Under dial screen/Bluetooth audio mode,
tap .
2
Tap [Paired Device].
» The Bluetooth/Paired device screen is
displayed.
3
Tap on one device that you want to
reconnect/disconnect.
Tap (green) to reconnect the
selected device.
Tap (red) to disconnect the selected
device.
Pairing with unit
1
2
3
4
Tap
to display home menu.
Tap .
» The setting menu is displayed.
Tap
to display Bluetooth setting menu.
Tap [New Pairing] to search for Bluetooth
device with your device.
5
Select the name of desired device in the
pairing list.
6
Enter default password "0000" in your
device.
» If the pairing succeeds, the phone call
record is displayed.
Tip
If the Bluetooth device is paired, under disconnect
Pairing with mobile phone
1
Open your mobile phone and switch on
Bluetooth.
2
Search for other Bluetooth device with
your device.
26
EN
on top of the screen into the Bluetooth/
mode, tap
paired device list.
If there is no Bluetooth device in the paired device list,
on top of the screen, [Paired list is empty] is
tap
to search the device.
displayed, you can tap
If you do not want to reconnect the device to the
> [Auto
unit automatically, under Setting menu, tap
Connect], then select [Off]. For details, see "Adjust
Bluetooth settings" section.
Receive call
You can make phone call with the unit under
any mode.
By default, all incoming calls are received
automatically.
Note
Note
Ensure that the phone is connected to the unit via
You can select to receive calls manually by set [Auto
Bluetooth.
Answer] to [Off] status. For details, refer to "Adjust
Bluetooth settings".
1
Tap on top of the screen.
» The dial screen is displayed.
2
Tap number icons directly to input phone
number.
Tap
to clear the last input.
Tap to clear all input.
Tap to go back to previous screen.
3
Tap
E n g lis h
Make a call
to start calling.
1
If there is an incoming call, [Incoming
call…] is displayed on the screen.
2
3
Tap
(green) to answer/accept the call.
When conversation ends, tap
terminate the call.
(red) to
Tip
You can also press
/
on front panel to answer/
terminate the call.
Switch phone call to mobile phone
4
During talking, tap
to display the keypad.
If you do not want your passenger to hear your
incoming call, you can switch the call the mobile
phone.
During talking, tap .
» The voice is transferred from the
loudspeaker to the mobile phone.
EN
27
Tip
You can also press and hold
2
Tap
3
Tap on desired number to start calling.
to display the favorite call list.
on front panel to
transfer the call.
Bluetooth phone book
settings
The users are allowed to search and dial the
number stored in the phone book.
1
Tap on top of the screen.
» The dial screen is displayed.
2
Tap to display the phone book mode.
» Tap [Sync] to synchronize phone book.
3
Adjust Bluetooth settings
1
Search the number you want to dial, then
tap to start calling.
[New Pairing]: pair the new device.
[Paired Device]: display paired device.
[Display Design]: change the
background.
Tip
You can enter desired name/number on the keypad to
search quickly.
Favorite call
You can make a favorite call from the favorite
call list.
1
Tap on top of screen.
» The dial screen is displayed.
28
EN
In the Bluetooth menu, tap .
» The option menu is displayed.
2
Tap an option to change the setting.
If the connected Bluetooth device supports
;
;&#;|&#}
you can listen to the music stored on the device
through the unit. If the device also supports
;~$"%#;~$%#}
its remote control to play music stored on the
device.
1
2
3
4
Pair the phone with the unit.
Tap
Tap
to return to home menu.
.
The Bluetooth menu is displayed.
Tap : switch to music mode.
Tap : switch to dial screen mode.
Tap : switch to phone book.
8 Play iPod
Compatible iPod/iPhone/iPad
The car audio system supports below iPod/
iPhone/iPad models:
Made for.
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
Works with.
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iPad 2
iPad
EN
29
E n g lis h
Listen to music from
Bluetooth device
Listen to the iPod/iPhone/
iPad
1
Connect your iPod/iPhone/iPad to the
front USB socket via Apple's own 30pin
USB cable.
» Music playback starts.
Search for a track
During play from iPod/iPhone/iPad, you can
"
]
]=
1
During playing, tap .
» Search list is displayed.
2
Tap one of the icons below to select
]^
: to search a song.
: to search a video.
3
Tap on the screen to select desired song/
movie.
4
Tap on the selected song/movie to play.
Charge the iPod/iPhone/iPad
When the iPod/iPhone/iPad is connected to the
car audio system, the iPod/iPhone/iPad begins
to charge.
2
3
4
To pause/resume play, tap .
To skip a track, tap
/
.
To fast backward/forward, tap and hold
/ .
5
Tap repeatedly to toggle between two
control modes:
iPod control mode: use buttons/touch
screen on iPod/iPhone/iPad to control
the music.
Unit control mode: tap screen on car
audio to control the music.
30
EN
Tip
For certain iPod models, it may take up to one minute
before the charging indication is displayed.
3
Adjust EQ settings by tapping on the
screen.
[Bass] bass range: -14 to +14.
[Middle] middle range: -14 to +14.
[Treble] treble range: -14 to +14.
[LPF]=^€€‚€€
160.
[MPF]"^€ƒ„…†
1.0KHz, 1.5KHz, 2.5KHz.
[HPF]^‚€€„…†
12.5KHz, 15.0KHz, 17.5KHz.
4
?=
sound settings, tap to restore default
settings.
5
Tap
Adjust volume
Rotate clockwise/counterclockwise to
increase/decrease the volume.
Mute
You can turn off the sound of your audio.
During play, press / on front panel.
To resume sound, press / on front
panel again.
Select preset equalizer
1
2
Tap .
» The current equalizer setting is
displayed.
Tap or to select a preset EQ:
[Custom]
[Techno]
[Rock]
[Classic]
[Jazz]
[Optimal]
[Flat]
[Pop]
to exit.
Adjust fader/balance/
subwoofer
You can adjust the sound balance between
the front, rear, left, and right speakers and
subwoofer.
1
Tap on upper line of the screen to
display setting menu.
2
Tap
3
Tap or
to adjust fader/balance value.
[Fader] fader range: +16 to -16. (F =
front speaker, R = rear speaker)
[Balance] balance range: -16 to +16. (L
= left speaker, R = right speaker)
.
EN
31
E n g lis h
9 Adjust sound
4
Tap .
» The subwoofer setting is displayed.
4
Tap on the screen to adjust music listening
zone setting.
Turn FullSound on/off
[Subwoofer]: tap [On]/[Off] on screen
to turn the subwoofer on or off.
Tap or
to select subwoofer
volume: 0 to 14.
[LPF]: tap screen to select subwoofer
=^€‚|€‚€
5
Tap
to exit.
Philips FullSound restores the audio details that
is lost in music compression. It enriches the
music signal, so what you hear is the full sound
with every nuance of emotion and every detail
of musical genius. Philips FullSound can:
Bring CD listening experience to MP3
Achieve fuller bass with greater depth and
impact
Restore sense of spaciousness that is
lacking in compressed audio
Enhance sound precision and detail
During play, tap
on the upper line of the
screen.
(red): FullSound is activated.
(gray): FullSound is deactivated.
Switch music listening zone
Philips’ innovative Zone technology enables
driver or passengers to enjoy music with the
best speakers balance and experience more
vivid spacial effect as the artist is intended to
create. You can switch the music listening zone
from driver to passengers for the best speaker
sound settings in car.
1
Tap on the upper line of the screen to
display setting menu .
2
3
Tap
32
EN
twice.
The music zone setting is displayed.
Turn MAX sound on/off
During play, tap on the upper line of screen.
(red): turn maximizing sound (MAX
sound) on.
(gray): turn maximizing sound (MAX
sound) off.
Turn DBB on/off
When DBB (Dynamic Bass Boost) is activated,
low tones will be enhanced electronically.
Tap
on the upper line of screen to toggle
between the settings.
(red): DBB (Dynamic Bass Boost)
function is activated.
(gray): DBB (Dynamic Bass Boost)
function is deactivated.
Display system setup menu
1
Tap
>
General
settings
[Radio
Region]
Options
[Beep]
to display the full menu.
[Language]
[Calibration]
2
Tap .
» The settings menu is displayed.
Adjust general settings
1
Tap
[Clock
Mode]
[Date]
[Time]
4
Tap
Description
Select one
that matches
your location.
[On]
Turn the
beep sound
on. Each time
you press a
button, the
unit beeps.
[Off]
Turn off the
beep sound.
Select OSD
(on screen
display)
language.
Calibrate the
touch screen.
[12Hr]/[24Hr] Select time
format.
Set date.
Set time.
to exit.
.
View Info settings
2
Drag the bar downward to view all
settings.
3
<=
select an option.
» The setting is changed.
1
Tap
2
Drag the bar downward to view all
detailed information of the system.
.
EN
33
E n g lis h
10 Adjust settings
Adjust Navigation settings
Adjust Bluetooth settings
1
Tap
1
Tap
2
<=
select an option.
» The setting is changed.
2
Tap on a setting repeatedly to change
setting.
.
Navigation
settings
[Navigation]
Options
[On]
[Off]
[Navigation
Program
Path]
[Navigation
Voice]
[On]
[Off]
3
Tap
Description
Turn the navigation
on.
Turn the navigation
off.
Access the
Navigation Program
Path mode.
Turn the navigation
voice on.
Turn the navigation
voice off.
Bluetooth
settings
[New
Pairing]
[Auto
Connect]
.
Options
Pair new device.
[On]
[Off]
[Auto
Answer]
[On]
[Off]
to exit.
[Pin
Code]
[Device
Name]
3
34
EN
Tap
Description
to exit.
If the pre-paired
device is within
effective range, the
system reconnects
to pre-paired device
automatically.
Need to reconnect
manually.
Answer paired phone
call automatically.
Answer phone call
manually.
Set code for pairing
the car entertainment
system with other
Bluetooth devices. The
default code is 0000.
View the name of
paired device.
Adjust display design
You can change the background screen on the
playback mode.
Adjust brightness
1
Press DISP on front panel repeatedly to
adjust the dimmer settings.
2
Press and hold DISP to turn off the display,
press again or tap on TFT screen to switch
on.
1
In any mode, tap .
» The option menu is displayed.
2
Tap [Display Design] to set the options.
Tip
While playing DVD/Video or picture, you can also
/
tap on
contrast.
on screen to adjust screen brightness/
[Wallpaper]: tap to change wallpaper
on screen.
[Visualizer]: tap to change visualizer on
screen.
[Screen]: tap to change OSD display
color.
[Key Color]: tap to change OSD main
unit button illumination color.
Set rear view camera
If you connected a rear view camera, you can
see from the screen of the car audio system
what the camera takes when the back lamp
lights up.
1
2
Tap
3
Tap
to exit.
.
Tap .
» Picture from rear camera is displayed.
Listen to other devices
You can connect an external audio/video device
to the car audio system.
1
Connect the car audio to the device with
the supplied AV cable.
EN
35
E n g lis h
11 Others
AV IN
2
3
4
Tap
to display home menu.
Tap
[AV-IN1].
Operate the connected the device (see
instruction manual of the device).
Tip
If you connect the system to other audio devices
through the REAR OUT L/R connector (see "Wiring
Diagram" section), tap [AV-IN2] to listen to that device.
3
Pull the panel towards you to disengage it
from the chassis.
4
Store the panel in the supplied carrying
case to protect it from dirt or damage.
Detach the front panel
Reset
You can detach the front panel to deter theft.
When the unit hangs up, you can reset it.
Press RESET with a ball-point pen or similar
tool.
1
2
Press OPEN to release the panel.
36
EN
Push the right side of the panel leftward.
When the unit is reset, all the settings remain
unchanged.
E n g lis h
12 Product
information
Tip
Note
Replace fuse
Product information is subject to change without prior
notice.
If there is no power, the fuse may be damaged
and need to be replaced.
1
2
3
Take out the unit from dashboard.
4
Replace the fuse.
General
Check the electric connection.
Power supply
Buy a fuse that matches the voltage of the
damaged fuse (15A).
15A
15A
Fuse
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Subwoofer output
voltage
Aux-in level
Dimensions (W x H
x D)
Weight (main unit)
12 V DC (11 V - 16 V),
negative ground
15 A
4-8
50 W x 4 channels
24 W x 4 channels
(4 10% T.H.D.)
2.0 V ( CD play mode;
1 kHz, 0 dB, 10 k
load)
2.0 V (CD play mode,
61 Hz, 0 dB, 10 k
load)
500 mV
178 x 50 x 210 mm
3.1 kg
Disc player
Tip
System
If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction. In this
case, consult your Philips dealer.
Frequency response
Signal/noise ratio
Total harmonic
distortion
Channel separation
Video signal format
Video output
DVD / CD audio /
MP3 system
20 Hz - 20k Hz
>75dB
Less than 1%
>55dB
NTSC only
1 +/- 0.2V
EN
37
Radio
USB playability information
Frequency range - FM
Frequency range AM(MW)
Usable sensitivity - FM
Usable sensitivity - AM
(MW)
87.5 - 108.0 MHz
(50kHz per step)
522 - 1620 KHz
(9kHz per step)
5 uV
25 uV
LCD
Screen size
Display resolution
Contrast ratio
Brightness
7.0 inches
800 x 480 dots
500
450 cd/m2
Bluetooth
Communication
system
Output
Maximum
communication
range
Frequency band
Compatible
Bluetooth
Supported
codecs
Receive
Transmit
38
EN
Bluetooth Standard version
2.0
Bluetooth Standard Power
Class 2
Line of sight approx. 8m
2.4 GHz band (2.4000 GHz
- 2.4835 GHz)
…‹Œ#…Œ#}
…#…<#}
Advanced Audio
&#;|&#}
Audio Video Remote
%#;~$%#}
Compatible USB devices:
<`\""<`|€<`‚‚}
<`\<`|€<`‚‚}
Memory cards (SD / MMC / SDHC)
Supported USB formats:
<`"""^Œ;‚Œ;‘|
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Number of albums/folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
Supported MP3 disc format:
ISO9660, Joliet
Maximum title number: 512 (depending on
"}
Maximum album number: 255
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32-320 Kbps and
variable bit rate
Supported video formats:
DVD
Divx
Note
""
image size is no higher than 640 x 480, frame rate is 20
fps, data rate is no higher than 500 kbps.
SBC (Sub Band Codec)
SBC (Sub Band Codec)
Warning
Disc region code is not compatible with
the unit. Use disc with proper region code.
!"#"$
This device doesn’t support DivX playback
in SD or USB mode.
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
(www.philips.com/welcome). When you contact
Philips, ensure that the device is nearby and the
model number and serial number are available.
No power
Car engine has not been started. Start the
car engine.
Connections are incorrect.
Fuse has been damaged. Replace fuse.
No sound
Volume is too low. Adjust volume.
Speaker connections are incorrect.
No response to the remote control
Ensure that the path between the remote
control and the unit is clear from obstacles.
From a close distance, point the remote
control directly at the unit.
Switch F/R to correct position (F for front
control and R for rear control).
The function does not work. See the
instruction manual.
Replace the remote control battery.
Disc does not play
Disc is upside down. Ensure that the
printed side is upwards.
Disc is dirty. Clean the disc with a clean,
soft, lint-free cloth. Wipe the disc outwards
from the center.
Disc is defective. Try another disc.
incompatible disc is used. Try another disc.
Disc rating exceeds the restriction setting.
Change the rating settings to lower one.
No image
Parking wire connection is incorrect. Check
the wiring.
No image on rear display
Check if you are playing DivX video. If
yes, it’s normal, for this device does not
support video out in DivX playing mode.
%!&*;
Video DVD settings do not match with the
DVD. Adjust video DVD settings.
Video connection is improper. Check the
connections.
Noise in broadcasts.
Signals are too weak. Select other stations
with stronger signals.
Check the connection of the car antenna.
Change broadcast from stereo to mono.
Preset stations lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Fuse is broken
The fuse type is incorrect. Replace it with
a 15A fuse.
Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12
USB/SD/MMC data error. Check the USB
device or SD/MMC card.
About the Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used with the
system to play music.
EN
39
E n g lis h
13 Troubleshooting
The audio quality is poor after connection
with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
required for the system.
The Bluetooth function of the device is
not enabled. Refer to the user manual of
=
function.
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired mobile phone connects and
disconnects constantly.
The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
40
EN
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
CED780_55_UM_V1.0