USB to Video Multi Monitor

Video Adapter

Quick Installation Guide

Introduction

The USB to Video Multi Monitor Video Adapter allows you to connect a monitor, LCD or projector to your desktop or notebook PC and use it as an extended desktop or as an additional larger/ different display for your main screen.

Features and Benefits

• Compliant with Universal Serial Bus 2.0

Specification

• Display modes: primary, extended and mirror

• Supports 60Hz and 75Hz monitor refresh rates

• Display rotation: 0, 90, 180 270 degrees

• User friendly display configuration software

04-0746A 1

System Requirements

• Desktop of notebook PC with an available

USB 2.0 port

• Windows ® 7 (32-/64-bit) / XP (32-/64-bit)

/ Server 2003 & 2008 (32-/64-bit) / Server

2008 R2

Package Contents

• USB to Video Multi Monitor Adapter

• DVI to VGA adapter (JU-DV0211-S1 only)

• Driver CD

• Quick installation guide

Layout

2

USB port

VGA port

Figure 1: USB to VGA Multi Video Adapter

USB port

DVI port

Figure 2: USB to DVI/VGA Multi Video Adapter

Figure 3: USB to DVI/VGA with DVI to VGA Adapter

3

4

Installation

Make sure the proper version driver for your graphics card is installed, the USB to Video is not designed to work with Windows' Standard VGA

Graphics Adapter driver.

Windows 7

1.

Insert the driver CD.

At the AutoPlay box: Click Open folder to

view files, then double click Setup.

If AutoPlay doesn't start: Click Start, in the

Search programs and files box, type

D:\setup.exe, press Enter. (Change D: to match your CD/DVD-ROM drive letter)

2.

At User Account Controls, click Yes. This step could take up to 1 minute to appear.

3.

Click Next, select I accept the terms of the

license agreement, click Next.

4.

Select Yes, I want to restart my computer

now, then click Finish.

5.

While Windows is restarting, connect your second monitor to the USB to Video and turn it on.

6.

When Windows resumes, plug the USB to

Video into the computer, the driver will install automatically.

Windows XP / Server 2003

1.

Insert the driver CD. Click Start, then Run.

Type D:\setup.exe, click OK. (Change D: to match your CD/DVD-ROM drive letter)

2.

Click Next, select I accept the terms of the

license agreement, then click Next.

3.

Please wait while the InstallShield Wizard configures your system. This may take several minutes to complete. Do not interrupt this process.

4.

At InstallShield Wizard Complete, click

Finish.

5.

Connect your second monitor to the USB to

Video and turn it on.

6.

Plug the USB to Video into the computer and the driver will install automatically.

7.

At the taskbar when you see a message to restart your computer, please do so to complete the installation.

5

6

Windows Server 2008

1.

Insert the driver CD.

At the AutoPlay box: Double click Setup.

If AutoPlay doesn't start: Click Start, in the

Start Search box, type D:\setup.exe, press

Enter. (Change D: to match your

CD/DVD-ROM drive letter)

2.

Click Next, select I accept the terms of the

license agreement, click Next.

3.

Please wait while the InstallShield Wizard configures your system. This may take several minutes to complete. Do not interrupt this process.

4.

At InstallShield Wizard Complete, click

Finish.

5.

Connect your second monitor to the USB to

Video and turn it on.

6.

When Windows resumes, plug the USB to

Video into the computer and the driver will install automatically.

7.

At the taskbar when you see a message to restart your computer, please do so to complete the installation.

Server 2008 R2

1.

Insert the driver CD.

At the AutoPlay box: Click Open folder to

view files, then double click Setup.

If AutoPlay doesn't start: Click Start, in the

Search programs and files box, type

D:\setup.exe, press Enter. (Change D: to match your CD/DVD-ROM drive letter)

2.

Click Next, select I accept the terms of the

license agreement, click Next.

3.

Select Yes, I want to restart my computer

now, then click Finish.

4.

While Windows is restarting, connect your second monitor to the USB to Video and turn it on.

5.

When Windows resumes, plug the USB to

Video into the computer and the driver will install automatically.

7

8

To Verify Windows Installation

1.

From the desktop, right click Computer or

My Computer, then click Manage.

For Windows 7: Click Device Manager.

For Windows XP / Server 2003: Click Device

Manager.

For Windows Server 2008 / 2008 R2: Double click Diagnostics, then click Device

Manager.

2.

Double click Universal Serial Bus

controllers, Trigger II External Graphics should be displayed.

Display Utility

After successful driver installation either Super

Utility or USB Display Device icon will appear in the taskbar by the system clock. This utility allows you to change the viewing modes and resolutions for the USB to Video. Access the menu by right clicking the icon.

Super Utility (Windows 7 / Server 2008 R2)

Display Settings

• Duplicate these displays: In this setting, the USB to Video will mirror your desktop.

You will see the same image on both displays.

• Extend these displays: This setting extends your desktop for easy viewing of multiple windows. Windows will move off the primary display and enter the extended display. Note: To match the physical arrangement of your displays drag the monitor icons into the appropriate position.

See Figure 3: Monitor Orientation.

9

Figure 4: Monitor Orientation

• Make this my main display: This setting is active when using your monitors in

extended mode only. Before selecting this option, enable Auto Arrange* (right click anywhere on the desktop, click View, click

Auto Arrange) to allow your desktop icons to move to the new main display. *Note:

Without this setting, you will need to drag-n-drop your desktop icons to the new main display.

10

• Show desktop only on 1: This setting turns on display 1 and turns off all other displays

• Show desktop only on 2: This setting turns on display 2 and turns off all other displays

USB Display Device (XP / 2003 / 2008)

Viewing Modes

• Mirror: In this mode, the USB to Video will mirror your desktop. You will see the same image on both displays

• Extended: This mode extends your desktop for easy viewing of multiple windows.

Windows will move off the primary display and enter the extended display. Note: To match the physical arrangement of your displays see Figure 6: Monitor Orientation.

• Off: This setting turns off the USB to Video adapter

11

• Primary: This mode, makes the USB to Video the main display adapter in the system, and the system's main display will be the extended display*. *Note: For systems with the main display turned off, go to Display

Setting. Select the main display (1) and check Extend the desktop onto this monitor.

12

Figure 5: Select the Extended Display

Display Settings

Drag the monitor icons to match the physical arrangement of your monitor. In Windows 2000 click the Settings tab to display this screen. Note: this feature is disabled in Mirror mode.

Figure 6: Monitor Orientation

13

Frequently Asked Questions

Q1: Why won't my DVD video play when I move it over to the extended display?

A1: Some DVD playback software packages do not support playing on a second display adapter.

Q2: There are lines running up and down my screen or the screen is distorted

A2: This is due to a low or unsupported refresh rate. You can change this in Display

Properties/Settings/Advanced/Monitor.

Make sure you select the USB to Video and not set the refresh rate higher than what your monitor can support.

Q3: Why can't I make the USB to Video the primary display?

A3: Some video cards ship their product with a utility that prevents other video cards from being set as the primary video card. Check the bottom right hand corner of the taskbar for the utility. Disable the utility before switching the USB to Video adapter to be the primary display.

14

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at

www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond.

SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for five (5) years from the date of purchase of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store where you purchased from.

B) If your purchase has passed the store's return policy period, please follow the steps below to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All accessories that came with the original package must be included.

• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

• You are responsible for the cost of shipping to SIIG. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

• SIIG will ship the repaired or replaced product via Ground in the U.S. and

International Economy outside of the U.S. at no cost to the customer.

15

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions

(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/

O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital

Signage connectivity solutions to our extensive portfolio.

SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High quality control standards are evident by the overall ease of installation and compatibility of our products, as well as one of the lowest defective return rates in the industry.

SIIG products can be found in computer retail stores, mail order catalogs, through major distributors, system integrators, and VARs in the Americas and the UK, and through e-commerce sites.

PRODUCT NAME

USB to Video Multi Monitor Video Adapter

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: 510-657-8688

USB to Video Multi Monitor Video Adapter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of

Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.

October, 2011 Copyright © 2011 by SIIG, Inc. All rights reserved