- Computers & electronics
- Computer components
- System components
- Motherboards
- Biostar
- A880GU3Z
- User manual
advertisement
A880GU3Z/A880GZ Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.
Dichiarazione di conformità sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1
1.2
Before You Start ................................................................................ 1
Package Checklist ............................................................................. 1
1.3
1.4
1.5
Motherboard Features...................................................................... 2
Rear Panel Connectors ..................................................................... 3
Motherboard Layout......................................................................... 4
Chapter 2: Hardware Installation .......................... 5
2.1
Installing Central Processing Unit (CPU)....................................... 5
2.2
2.3
FAN Headers...................................................................................... 7
Installing System Memory................................................................ 8
2.4
Connectors and Slots ....................................................................... 10
Chapter 3: Headers & Jumpers Setup ................... 13
3.1
How to Setup Jumpers .................................................................... 13
3.2
Detail Settings.................................................................................. 13
Chapter 4: RAID Functions .................................. 18
4.1
Operating System............................................................................ 18
4.2
4.3
Raid Arrays ...................................................................................... 18
How RAID Works............................................................................. 18
Chapter 5: Useful Help ........................................ 22
5.1
Driver Installation Note.................................................................. 22
5.2
Software............................................................................................ 23
5.3
Extra Information............................................................................ 27
5.4
5.5
AMI BIOS Beep Code....................................................................... 29
Troubleshooting............................................................................... 30
Appendix: SPEC In Other Languages ................... 32
German.................................................................................................................. 32
French .................................................................................................................... 34
Italian..................................................................................................................... 36
Spanish ................................................................................................................... 38
Portuguese ............................................................................................................ 40
Polish...................................................................................................................... 42
Russian ................................................................................................................... 44
Arabic..................................................................................................................... 46
Japanese ................................................................................................................ 48
A880GU3Z/A880GZ
CHAPTER 1: INTRODUCTION
1.1 B
EFORE
Y
OU
S
TART
Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with sufficient lighting.
Always disconnect the computer from power outlet before operation.
Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.
Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat source, humid air and water.
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
1.2 P
ACKAGE
C
HECKLIST
Serial ATA Cable X 2
Rear I/O Panel for ATX Case X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)
Note: The package contents may be different due to area or your motherboard version.
1
Motherboard Manual
1.3 M
OTHERBOARD
F
EATURES
CPU
FSB
Chipset
A880GU3Z
Socket AM3+
AMD Sempron/Athlon II/Phenom II/FX processors
AMD 64 Architecture enables 32 and 64 bit computing
Supports Hyper Transport 3.0 and Cool=n=Quiet
(Maximum Watt: 125W)
Support HyperTransport 3.0
Supports up to 5.2 GT/s Bandwidth
AMD 880G
AMD SB850
A880GZ
Socket AM3+
AMD Sempron/Athlon II/Phenom II/FX processors
AMD 64 Architecture enables 32 and 64 bit computing
Supports Hyper Transport 3.0 and Cool=n=Quiet
(Maximum Watt: 125W)
Support HyperTransport 3.0
Supports up to 5.2 GT/s Bandwidth
AMD 880G
AMD SB850
Super I/O
Main
Memory
Graphics
SATA 3
LAN
Sound
USB3.0
Slots
ITE 8728
Provides the most commonly used legacy Super
I/O functionality
Low Pin Count Interface
Environment Control initiatives
H/W Monitor
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 2
Max Memory Capacity 8GB
Each DIMM supports 512MB/1GB/2GB/4GB DDR3
Dual Channel Mode DDR3 memory module
Supports DDR3 800/1066/1333/
1600(OC)/1866(OC)
Registered DIMM and ECC DIMM is not supported
ITE 8728
Provides the most commonly used legacy Super
I/O functionality
Low Pin Count Interface
Environment Control initiatives
H/W Monitor
ITE's "Smart Guardian" function
DDR3 DIMM Slots x 2
Max Memory Capacity 8GB
Each DIMM supports 512MB/1GB/2GB/4GB DDR3
Dual Channel Mode DDR3 memory module
Supports DDR3 800/1066/1333/
1600(OC)/1866(OC)
Registered DIMM and ECC DIMM is not supported
Integrated in AMD 880G Chipset
Max Shared Video Memory is 512MB
DVI/HDMI/HDCP/UVD2 support
Integrated Serial ATA Controller
Data transfer rates up to 6 Gb/s
SATA Version 3.0 specification compliant
Realtek RTL 8111E
10 / 100 / 1000 Mb/s auto negotiation
Half / Full duplex capability
ALC662
5.1 channels audio out
High Definition Audio
Integrated in AMD 880G Chipset
Max Shared Video Memory is 512MB
DVI/HDMI/HDCP/UVD2 support
Integrated Serial ATA Controller
Data transfer rates up to 6 Gb/s
SATA Version 3.0 specification compliant
Realtek RTL 8111E
10 / 100 / 1000 Mb/s auto negotiation
Half / Full duplex capability
ALC662
5.1 channels audio out
High Definition Audio
ASM1042 N/A
PCI Express Gen2 x16 slot
PCI slot x1 x2
PCI Express Gen2 x16 slot
PCI slot x1 x2
2
On Board
Connector
A880GU3Z
SATA Connector
Front Panel Connector
Front Audio Connector
S/PDIF Out Connector
CPU Fan Header
System Fan Header
CMOS clear Header
USB 2.0 Connector
Power Connector (24pin)
Power Connector (4pin)
Consumer IR Connector
Printer Port Connector
Serial port Connector
PS/2 Keyboard / Mouse
HDMI Port
VGA Port
DVI-D Port Back Panel
I/O LAN Port
USB 2.0 Port (by SB850)
USB 3.0 Port (by ASM1042)
Audio Jack
Board Size 200 mm(W) x 244 mm(L)
Special
Features
RAID 0 / 1 / 5 / 10 support
OS Support
Windows XP / Vista / 7
Biostar reserves the right to add or remove support for any OS With or without notice.
1.4 R
EAR
P
ANEL
C
ONNECTORS
x1 x1 x2 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x2 x2 x3
PS/2
Keyboard / Mouse
A880GU3Z/A880GZ
A880GZ
SATA Connector
Front Panel Connector
Front Audio Connector
S/PDIF Out Connector
CPU Fan Header
System Fan Header
CMOS clear Header
USB 2.0 Connector
Power Connector (24pin)
Power Connector (4pin)
Consumer IR Connector
Printer Port Connector
Serial port Connector x1 x1 x2 x1 x4 x1 x1 x1 x1 x1 x1 x1 x1
PS/2 Keyboard / Mouse
HDMI Port
VGA Port
DVI-D Port
LAN Port
USB 2.0 Port
Audio Jack
200 mm(W) x 244 mm(L)
RAID 0 / 1 / 5 / 10 support x1 x1 x1 x1 x1 x4 x3
Windows XP / Vista / 7
Biostar reserves the right to add or remove support for any OS With or without notice.
LAN
Line In/
Surround
Line Out
Mic In 1/
Bass/ Center
USB2.0X2
HDMI DVI-D VGA USB3.0X2 (For A880GU3Z)
USB2.0X2 (For A880GZ)
NOTE: The HDMI and DVI-D ports both can provide digital video signals out-put function, but these two interfaces cannot work at the same time. The chipset uses the same channel to control HDMI and DVI-D, so these ports cannot transmit video signal to different display panels simultaneously.
NOTE: USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is controlled by ASM1042, but, USB2.0/USB1.X is controlled by SB850. (For A880GU3Z)
3
Motherboard Manual
1.5 M
OTHERBOARD
L
AYOUT
USBKBMS1
ATX PW R 2
JUSBV1
C PU _FAN 1
ATXP W R1
JUSBV3
RJ45USB1
AUDIO1
LAN
AMD
880G
BAT1
JCMO S1
SATA4
SATA3
BIOS
P E X16_1
Super I/O
PCI1
AMD
SB850
PCI2
Codec
CIR 1 J_PR IN T1 J_COM 1
JUS BV 2
F_AUDIO1
JSP DI FO UT1
Note: represents the 1 st pin.
SATA2
F_US B 1 F_US B2
SYS_FAN1
SATA1
PA NE L1
4
A880GU3Z/A880GZ
CHAPTER 2: HARDWARE INSTALLATION
2.1 I
NSTALLING
C
ENTRAL
P
ROCESSING
U
NIT
(CPU)
Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle.
Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
5
Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the installation.
6
A880GU3Z/A880GZ
2.2 FAN H
EADERS
These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to pin#1.
CPU_FAN1: CPU Fan Header
1
4
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
Fan
Control (By Fan)
SYS_FAN1: System Fan Header
Pin Assignment
1 Ground
2 +12V
3 FAN RPM rate sense
1 3
Note:
CPU_FAN1 supports 4-pin head connector. SYS_FAN1 supports 3-pin head connector.
When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.
7
Motherboard Manual
2.3 I
NSTALLING
S
YSTEM
M
EMORY
A. Memory Modules
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
8
2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
A880GU3Z/A880GZ
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
Total Memory
Size
DDR3_B1 512MB/1GB/2GB/4GB
C. Dual Channel Memory installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table
Dual Channel Status DDR3_A1 DDR3_B1
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or x16)
9
Motherboard Manual
2.4 C
ONNECTORS AND
S
LOTS
SATA1~SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
SATA4
SATA3
SATA2
SATA1
Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground
7 4 1
ATXPWR2: ATX Power Source Connector
This connector will provide +12V to CPU power circuit.
2 1
3 4
Pin Assignment
1 +12V
2 +12V
3 Ground
4 Ground
10
A880GU3Z/A880GZ
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX power supply.
1 2 2 4
1 1 3
Pin Assignment
13 +3.3V
14 -12V
15 Ground
16 PS_ON
17 Ground
18 Ground
19 Ground
20 NC
21 +5V
22 +5V
23 +5V
24 Ground
Note:
Pin Assignment
1 +3.3V
2 +3.3V
3 Ground
4 +5V
5 Ground
6 +5V
7 Ground
8 PW_OK
10 +12V
11 +12V
12 +3.3V
Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in.
11
Motherboard Manual
PEX16_1: PCI-Express Gen2 x16 Slot
-
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally.
PEX16_1
PCI1~PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
12
A880GU3Z/A880GZ
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 H
OW TO
S
ETUP
J
UMPERS
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
3.2 D
ETAIL
S
ETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
9
1
PWR_LED
On/Off
+ + -
16
8
+ -
SPK RST
HLED
Pin Assignment Function Function
1 +5V
2 N/A
3 N/A
4 Speaker
Speaker
Connector
9 N/A
10 N/A
11 N/A
12 Power LED (+)
N/A
N/A
5
6
HDD LED (+)
HDD LED (-)
7 Ground
Hard drive
LED
Reset button
13
14
Power LED (+)
Power LED (-)
16 Ground
Power LED
Power-on button
13
Motherboard Manual
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.
Pin Assignment
2
1
10
9
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 NC
10 Key
JUSBV1/JUSBV2/JUSBV3: Power Source Headers for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at USBKBMS1.
JUSBV2: +5V for USB ports at F_USB1/F_USB2.
JUSBV3: +5V for USB ports at RJ45USB1.
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at USBKBMS1.
JUSBV2: +5V STB for USB ports at F_USB1/F_USB2.
JUSBV3: +5V STB for USB ports at RJ45USB1.
JUSBV1
1
3
JUSBV3
1 3
Pin 1-2 close
1 3
JUSBV2
1 3
Pin 2-3 close
14
A880GU3Z/A880GZ
JSPDIFOUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin Assignment
1 +5V
2 SPDIF_OUT
3 Ground
1 3
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable.
Pin
1
Assignment
Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
2
1
1 0
8 Key
9 Left line in
9
15
Motherboard Manual
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.
3
3
1
Pin 1-2 Close:
Normal Operation (default).
3
1
1
Pin 2-3 Close:
Clear CMOS data.
※
Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset your desired password or clear the CMOS data.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
Pin Assignment
2
1
4 Data terminal ready
10
9
7
8
Request to send
Clear to send
10 NC
16
J_PRINT1: Printer Port Connector
This header allows you to connector printer on the PC.
A880GU3Z/A880GZ
2 26
1 25
Pin Assignment Pin Assignment
1 -Strobe
2 -ALF
14 Ground
16 Ground
4 -Error
6 -Init
8 -Scltin
10 Ground
12 Ground
18 Ground
19 -ACK
20 Ground
21 Busy
22 Ground
23 PE
24 Ground
25 SCLT
26 Key
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
Pin Assignment
1 IrDA serial input
2 Ground
3 Ground
4 Key
5 IrDA serial output
2 6
1 5
17
Motherboard Manual
CHAPTER 4: RAID FUNCTIONS
4.1 O
PERATING
S
YSTEM
Supports Windows XP, Windows Vista, and Windows 7.
4.2 R
AID
A
RRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
4.3 H
OW
RAID W
ORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment.
This technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
- Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the platform.
- Uses: Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance.
- Benefits: provides increased data throughput, especially for large files.
No capacity loss penalty for parity.
- Drawbacks: Does not deliver any fault tolerance. If any drive in the array fails, all data is lost.
- Fault Tolerance: No.
18
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
A880GU3Z/A880GZ
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.
Features and Benefits
- Drives: Minimum 2, and maximum is 2.
- Uses: RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity.
- Benefits: Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive.
- Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
- Fault Tolerance: Yes.
Block 1
Block 2
Block 3
Block 1
Block 2
Block 3
19
Motherboard Manual
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance.
Features and Benefits
- Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
- Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
- Drawbacks: Requires twice the available disk space for data redundancy, the same as RAID level 1.
- Fault Tolerance: Yes.
Block 1
Block 3
Block 5
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
20
A880GU3Z/A880GZ
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself.
Features and Benefits
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general purpose service.
Benefits: An ideal combination of good performance, good fault tolerance, and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
21
Motherboard Manual
CHAPTER 5: USEFUL HELP
5.1 D
RIVER
I
NSTALLATION
N
OTE
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system performance.
You will see the following window after you insert the CD
22
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html
A880GU3Z/A880GZ
5.2 S
OFTWARE
Installing Software
1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. title.
3. Follow the on-screen instructions to complete the installation.
Launching Software
After the installation process, you will see the software icon “eHOT Line” /
“BIOS Update” appears on the desktop. Double-click the icon to launch the utility.
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
* must provide. Wi thout this information, you may not be able to send out the mail.
This bl ock will show the i nformation which would be collected in the mail .
* Describe conditi on of your system.
* Select your area or the area cl ose to you.
Provide the e-ma il address that you would like to send the copy to.
* Provid e the name of the memory module manufacturer.
Send the mail out.
Exi t thi s dialog.
Save these in forma tion to a .txt file
Provide the name of the power suppl y manufacturer and the model no.
23
Motherboard Manual
After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name.
Enter the file name and then click
“Save”. Your system information will be saved to a .txt file.
Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.
We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application.
Go to the following web http://www.biostar.com.tw/app/en-us/about/contact.php
for getting our contact information.
24
A880GU3Z/A880GZ
BIOS Update
BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system.
AWARD BIOS
Show current BIOS information
AMI BIOS
Clear CMOS function
(Only for AWARD BIOS)
Save current BIOS to a .bin file
Update BIOS with a BIOS file
<Backup BIOS>
Once click on this button, the saving dialog will show. Choose the position to save file and enter file name. (We recommend that the file name should be English/number and no longer than 7 characters.)
Then click Save.
25
Motherboard Manual
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first.
Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
After the BIOS Backup procedure, the open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for updating, then click on Open.
The utility will update BIOS with the proper BIOS file, and this process may take minutes. Please do not open any other applications during this process.
After the BIOS Update process, click on
OK to restart the system.
While the system boots up and the full screen logo shows, press key to enter BIOS setup.
<Delete>
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
All the information and content above about the software are subject to be changed without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual information and settings on board may be slightly different from this manual.
26
A880GU3Z/A880GZ
5.3 E
XTRA
I
NFORMATION
CPU Overheated
If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
27
Motherboard Manual
BIO-Flasher
BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk.
The BIO-Flasher is built in the BIOS chip. To enter the utility, press <F12>
during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIO-Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, save the BIOS file into a USB pen drive or a floppy disk.
3. Insert the USB pen drive or the floppy disk that contains the BIOS file to the
USB port or the floppy disk drive.
4. Power on or reset the computer and then press <F12> during the POST process.
A select dialog as the picture on the right appears.
Select the device contains the BIOS file and press <Enter> to enter the utility.
5. The utility will show the BIOS files and their respective information. Select the proper
BIOS file and press <Enter> then <Y> to perform the BIOS update process.
6. After the update process, the utility will ask you to reboot the system.
Press <Y> to proceed. BIOS update completes. z This utility only allows storage device with FAT32/16 format and single partition. z Shutting down or resetting the system while updating the BIOS will lead to system boot failure.
28
A880GU3Z/A880GZ
5.4 AMI BIOS B
EEP
C
ODE
Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
7
10
11
12
13
Description
No media present. (Insert diskette in floppy drive A:)
“AMIBOOT.ROM” file not found in root directory of diskette in
A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
No Flash EPROM detected
Flash Erase error
Flash Program error
“AMIBOOT.ROM” file size error
BIOS ROM image mismatch (file layout does not match image present in flash device)
POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8
Description
Memory refresh timer error
Base memory read/write test error
Keyboard controller BAT command failed
General exception error (processor exception interrupt error)
Display memory error (system video adapter)
Troubleshooting POST BIOS Beep Codes
Number of Beeps Troubleshooting Action
1, 3
6, 7
8
Reseat the memory, or replace with known good modules.
Fatal error indicating a serious problem with the system.
Consult your system manufacturer. Before declaring the motherboard beyond all hope, eliminate the possibility of interference by a malfunctioning add-in card. Remove all expansion cards except the video adapter. z If beep codes are generated when all other expansion cards are absent, consult your system manufacturer’s technical support. z If beep codes are not generated when all other expansion cards are absent, one of the add-in cards is causing the malfunction. Insert the cards back into the system one at a time until the problem happens again. This will reveal the malfunctioning card.
If the system video adapter is an add-in card, replace or reseat the video adapter. If the video adapter is an integrated part of the system board, the board may be faulty.
29
Motherboard Manual
5.5 T
ROUBLESHOOTING
Probable Solution
1. There is no power in the system.
Power LED does not shine; the fan of the power supply does not work
2. Indicator light on keyboard does not shine.
1. Make sure power cable is securely plugged in.
3. Contact technical support.
System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.
System does not boot from a hard disk drive, but can be booted from optical drive.
System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk.
Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.
1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.
2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.
1. Back up data and applications files.
2. Reformat the hard drive.
Re-install applications and data using backup disks.
Screen message shows “Invalid
Configuration” or “CMOS Failure.”
Review system’s equipment. Make sure correct information is in setup.
System cannot boot after user installs a second hard drive.
1. Set master/slave jumpers correctly.
2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.
30
This page is intentionally left blank.
A880GU3Z/A880GZ
31
Motherboard Manual
APPENDIX: SPEC IN OTHER LANGUAGES
G
ERMAN
CPU
FSB
Chipsatz
Super E/A
Arbeitsspeich er
Grafik
SATA 3
LAN
A880GU3Z
Sockel AM3+
AMD Sempron/Athlon II/Phenom II/FX
Prozessoren
Die AMD 64-Architektur unterstützt eine 32-Bit- und 64-Bit-Datenverarbeitung
Unterstützt Hyper Transport 3.0 und Cool’n’Quiet
(Maximales Watt: 125W)
Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
AMD 880G
AMD SB850
Sockel AM3+
A880GZ
AMD Sempron/Athlon II/Phenom II/FX
Prozessoren
Die AMD 64-Architektur unterstützt eine 32-Bit- und 64-Bit-Datenverarbeitung
Unterstützt Hyper Transport 3.0 und Cool’n’Quiet
(Maximales Watt: 125W)
Unterstützt HyperTransport 3.0 mit einer
Bandbreite von bis zu 5.2 GT/s
AMD 880G
AMD SB850
ITE 8728
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
"Smart Guardian"-Funktion von ITE
DDR3 DIMM-Steckplätze x 2
Max. 8GB Arbeitsspeicher
Jeder DIMM unterstützt 512MB/ 1GB/2GB/4GB
DDR3.
Dual-Kanal DDR3 Speichermodul
Unterstützt DDR3 800/1066/1333/
1600(OC)/1866(OC) registrierte DIMMs. ECC DIMMs werden nicht unterstützt.
ITE 8728
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
"Smart Guardian"-Funktion von ITE
DDR3 DIMM-Steckplätze x 2
Max. 8GB Arbeitsspeicher
Jeder DIMM unterstützt 512MB/ 1GB/2GB/4GB
DDR3.
Dual-Kanal DDR3 Speichermodul
Unterstützt DDR3 800/1066/1333/
1600(OC)/1866(OC) registrierte DIMMs. ECC DIMMs werden nicht unterstützt.
Integrierter AMD 880G-Chipsatz
Max. 512MB gemeinsam benutzter
Videospeicher
Unterstützt DVI/HDMI/HDCP/UVD2
Integrierter Serial ATA-Controller
Datentransferrate bis zu 6 Gb/s
Konform mit der SATA-Spezifikation Version
3.0.
Realtek RTL 8111E
10 / 100 / 1000 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion
Integrierter AMD 880G-Chipsatz
Max. 512MB gemeinsam benutzter
Videospeicher
Unterstützt DVI/HDMI/HDCP/UVD2
Integrierter Serial ATA-Controller
Datentransferrate bis zu 6 Gb/s
Konform mit der SATA-Spezifikation Version
3.0.
Realtek RTL 8111E
10 / 100 / 1000 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion
HD
Audio-Unters tützung
ALC662
5.1-Kanal-Audioausgabe
Unterstützt High-Definition Audio
ALC662
5.1-Kanal-Audioausgabe
Unterstützt High-Definition Audio
USB3.0
Steckplätze
ASM1042 N/A
PCI Express Gen2 x16 Steckplatz x1 PCI Express Gen2 x16 Steckplatz x1
32
A880GU3Z
A880GU3Z/A880GZ
A880GZ
Onboard-Ans chluss
S/PDIF- Ausgangsanschluss
"CMOS löschen"-Sockel
USB 2.0-Anschluss
Stromanschluss (24-polig)
Stromanschluss (4-polig)
Verbraucher-IR Anschluss
Druckeranschluss Anschluss
Serieller Anschluss
PS/2-Tastatur / Maus x1 x1 x2 x1 x1 x1 x1 x1 x1
S/PDIF- Ausgangsanschluss
"CMOS löschen"-Sockel
USB 2.0-Anschluss
Stromanschluss (24-polig)
Stromanschluss (4-polig)
Verbraucher-IR Anschluss
Druckeranschluss Anschluss
Serieller Anschluss x1 x1 x2 x1 x1 x1 x1 x1 x1
Rückseiten-E
/A
USB 2.0-Anschluss (durch SB850) x2
USB 3.0-Anschlus
(durch ASM1042) x2
LAN-Anschluss x1
USB 2.0-Anschluss x4
Audioanschluss x3
Audioanschluss x3
Platinengröß e
Sonderfunkti onen
200 mm (B) X 244 mm (L)
Unterstützt RAID 0 / 1 / 5 / 10
200 mm (B) X 244 mm (L)
Unterstützt RAID 0 / 1 / 5 / 10
OS-Unterstü tzung
Windows XP / Vista / 7
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu entfernen.
Windows XP / Vista / 7
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu entfernen.
33
Motherboard Manual
F
RENCH
Prise en charge audio HD
A880GU3Z A880GZ
UC
Bus frontal
Chipset
Super E/S
Mémoire principale
Graphiques
SATA 3
LAN
Socket AM3+
Processeurs AMD Sempron/Athlon II/Phenom
II/FX
L'architecture AMD 64 permet le calcul 32 et 64 bits
Prend en charge Hyper Transport 3.0 et
Cool’n’Quiet
(Watt maximum : 125W)
Prend en charge Hyper Transport 3.0 jusqu'à une bande passante de 5.2 GT/s
AMD 880G
AMD SB850
ITE 8728
Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée.
Interface à faible compte de broches
Socket AM3+
Processeurs AMD Sempron/Athlon II/Phenom
II/FX
L'architecture AMD 64 permet le calcul 32 et 64 bits
Prend en charge Hyper Transport 3.0 et
Cool’n’Quiet
(Watt maximum : 125W)
Prend en charge Hyper Transport 3.0 jusqu'à une bande passante de 5.2 GT/s
AMD 880G
AMD SB850
ITE 8728
Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée.
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Moniteur de matériel
Fonction "Gardien intelligent" de l'ITE
Fentes DDR3 DIMM x 2
Initiatives de contrôle environnementales,
Moniteur de matériel
Fonction "Gardien intelligent" de l'ITE
Fentes DDR3 DIMM x 2
Capacité mémoire maximale de 8 Go
Chaque DIMM prend en charge des DDR3 de
Capacité mémoire maximale de 8 Go
Chaque DIMM prend en charge des DDR3 de
256 Mo/512 Mo et 1Go/2Go/4Go
Module de mémoire DDR3 à mode à double voie
256 Mo/512 Mo et 1Go/2Go/4Go
Module de mémoire DDR3 à mode à double voie
Prend en charge la DDR3 800/1066/1333/
1600(OC)/1866(OC)
Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge
Prend en charge la DDR3 800/1066/1333/
1600(OC)/1866(OC)
Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge
Integré dans la chipset AMD 880G
Mémoire vidéo partagée maximale de 512 Mo
Prise en charge DVI/HDMI/HDCP/UVD2
Contrôleur Serial ATA intégré
Integré dans la chipset AMD 880G
Mémoire vidéo partagée maximale de 512 Mo
Prise en charge DVI/HDMI/HDCP/UVD2
Contrôleur Serial ATA intégré
Taux de transfert jusqu'à 6 Go/s.
Conforme à la spécification SATA Version 3.0
Realtek RTL 8111E
Taux de transfert jusqu'à 6 Go/s.
Conforme à la spécification SATA Version 3.0
Realtek RTL 8111E
10 / 100 / 1000 Mb/s négociation automatique
Half / Full duplex capability
10 / 100 / 1000 Mb/s négociation automatique
Half / Full duplex capability
ALC662
Sortie audio à 5.1 voies
Prise en charge de l'audio haute définition
ALC662
Sortie audio à 5.1 voies
Prise en charge de l'audio haute définition
USB3.0 ASM1042 N/A
Fentes
Fente PCI Express Gen2 x16
Fente PCI x1 x2
Fente PCI Express Gen2 x16
Fente PCI x1 x2
34
Connecteur embarqué
Connecteur SATA
A880GU3Z x4
Connecteur du panneau avant x1
Connecteur Audio du panneau avant x1
Connecteur de sortie S/PDIF
Embase de ventilateur UC
Embase de ventilateur système
Embase d'effacement CMOS x1 x1 x1 x1
Connecteur USB 2.0
Connecteur d'alimentation
(24 broches)
Connecteur d'alimentation x2 x1 x1
(4 broches)
Connecteur de IR du consommateur
E/S du panneau arrière
Connecteur de Port d'imprimante x1
Connecteur de Port série x1
Clavier / Souris PS/2
Port HDMI
Port VGA
Port DVI-D x1 x1 x1 x1
Port LAN
Port USB 2.0 (par SB850)
Port USB 3.0 (par ASM1042)
Fiche audio x1 x2 x2 x3
Dimension s de la carte
200 mm (l) X 244 mm (H)
Fonctionnal ités spéciales
Prise en charge RAID 0 / 1 / 5 / 10
Support SE
Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis.
A880GU3Z/A880GZ
A880GZ
Connecteur SATA x4
Connecteur du panneau avant x1
Connecteur Audio du panneau avant x1
Connecteur de sortie S/PDIF
Embase de ventilateur UC
Embase de ventilateur système
Embase d'effacement CMOS
Connecteur USB 2.0
Connecteur d'alimentation
(24 broches)
Connecteur d'alimentation x2 x1 x1
(4 broches)
Connecteur de IR du consommateur x1 x1 x1 x1
Connecteur de Port d'imprimante x1
Connecteur de Port série x1
Clavier / Souris PS/2
Port HDMI
Port VGA
Port DVI-D
Port LAN
Port USB 2.0
Fiche audio x1 x1 x1 x1 x1 x4 x3
200 mm (l) X 244 mm (H)
Prise en charge RAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis.
35
Motherboard Manual
I
TALIAN
CPU
FSB
LAN
Chipset
Super I/O
Memoria principale
Grafica
SATA 3
Supporto audio HD
USB3.0
Alloggi
A880GU3Z
Socket AM3+
Processori AMD Sempron/Athlon II/Phenom
II/FX
L’architettura AMD 64 abilita la computazione 32 e 64 bit
Supporto di Hyper Transport 3.0 e
Cool’n’Quiet
(Watt massimo: 125W)
Supporto di HyperTransport 3.0 fino a 5.2
GT/s di larghezza di banda
AMD 880G
AMD SB850
ITE 8728
Fornisce le funzionalità legacy Super I/O usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 2
Capacità massima della memoria 8GB
Ciascun DIMM supporta DDR3 512MB e
1GB/2GB/4GB
Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 800/1066/1333/
1600(OC)/1866(OC)
DIMM registrati e DIMM ECC non sono supportati
Integrata nel Chipset AMD 880G
La memoria video condivisa massima è di
512 MB
Supporto DVI/HDMI/HDCP/UVD2
Controller Serial ATA integrato
A880GZ
Socket AM3+
Processori AMD Sempron/Athlon II/Phenom
II/FX
L’architettura AMD 64 abilita la computazione 32 e 64 bit
Supporto di Hyper Transport 3.0 e
Cool’n’Quiet
(Watt massimo: 125W)
Supporto di HyperTransport 3.0 fino a 5.2
GT/s di larghezza di banda
AMD 880G
AMD SB850
ITE 8728
Fornisce le funzionalità legacy Super I/O usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR3 x 2
Capacità massima della memoria 8GB
Ciascun DIMM supporta DDR3 512MB e
1GB/2GB/4GB
Modulo di memoria DDR3 a canale doppio
Supporto di DDR3 800/1066/1333/
1600(OC)/1866(OC)
DIMM registrati e DIMM ECC non sono supportati
Integrata nel Chipset AMD 880G
La memoria video condivisa massima è di
512 MB
Supporto DVI/HDMI/HDCP/UVD2
Controller Serial ATA integrato
Velocità di trasferimento dei dati fino a 6
Gb/s.
Compatibile specifiche SATA Versione 3.0.
Velocità di trasferimento dei dati fino a 6
Gb/s.
Compatibile specifiche SATA Versione 3.0.
Realtek RTL 8111E Realtek RTL 8111E
Negoziazione automatica 10 / 100 / 1000 Mb/s Negoziazione automatica 10 / 100 / 1000 Mb/s
Capacità Half / Full Duplex
ALC662
Uscita audio 5.1 canali
Supporto audio High-Definition (HD)
Capacità Half / Full Duplex
ALC662
Uscita audio 5.1 canali
Supporto audio High-Definition (HD)
ASM1042 N/A
Alloggio PCI Express Gen2 x16 x1
Alloggio PCI x2
Alloggio PCI Express Gen2 x16 x1
Alloggio PCI x2
36
A880GU3Z/A880GZ
A880GU3Z
Connettore SATA x4
Connettore pannello frontale x1
Connettore audio frontale
Connettore output SPDIF x1 x1
Connettori su scheda
Collettore ventolina CPU
Collettore ventolina sistema x1 x1
Collettore cancellazione CMOS x1
Connettore USB 2.0 x2
Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(4 pin)
Connettore IR del consumatore x1
Connettore Porta stampante x1
Connettore Porta seriale x1
I/O pannello posteriore
Tastiera / Mouse PS/2
Porta HDMI
Porta VGA
Porta DVI-D
Porta LAN
Porta USB 2.0 (da SB850) x2
Porta USB 3.0 (da ASM1042) x2
Connettore audio x3 x1 x1 x1 x1 x1
Dimension i scheda
Connettore SATA
(24 pin)
(4 pin)
Porta HDMI
Porta VGA
Porta DVI-D
Porta LAN
Porta USB 2.0
Connettore audio
A880GZ
Connettore audio frontale
Connettore output SPDIF
Collettore ventolina CPU
Collettore ventolina sistema
Connettore USB 2.0
Connettore alimentazione
Connettore alimentazione
Connettore Porta stampante
Connettore Porta seriale
Tastiera / Mouse PS/2 x4
Connettore pannello frontale x1 x1 x1 x1 x1
Collettore cancellazione CMOS x1 x2 x1 x1
Connettore IR del consumatore x1 x1 x1 x1 x1 x1 x1 x1 x4 x3
200 mm (larghezza) x 244 mm (altezza) 200 mm (larghezza) x 244 mm (altezza)
Caratterist iche Supporto RAID 0 / 1 / 5 / 10 speciali
Sistemi operativi supportati
Windows XP / Vista / 7
Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso.
Supporto RAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso.
37
Motherboard Manual
S
PANISH
CPU
FSB
Conjunto de chips
A880GU3Z
Conector AM3+
Procesadores AMD Sempron/Athlon II/Phenom
II/FX
A880GZ
Conector AM3+
Procesadores AMD Sempron/Athlon II/Phenom
II/FX
La arquitectura AMD 64 permite el procesado de
32 y 64 bits
La arquitectura AMD 64 permite el procesado de
32 y 64 bits
Soporta las tecnologías Hyper Transport 3.0 y
Cool’n’Quiet
Soporta las tecnologías Hyper Transport 3.0 y
Cool’n’Quiet
(Vatio máximo: 125W)
Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s
(Vatio máximo: 125W)
Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s
AMD 880G
AMD SB850
AMD 880G
AMD SB850
Súper E/S
Memoria principal
Gráficos
SATA 3
Red Local
Soporte de sonido HD
USB3.0
ITE 8728
Le ofrece las funcionalidades heredadas de uso más común Súper E/S.
Interfaz de cuenta Low Pin
Iniciativas de control de entorno,
Monitor hardware
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR3 x 2
Capacidad máxima de memoria de 8GB
Cada DIMM admite DDR de 512MB y
1GB/2GB/4GB
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 800/1066/1333/
1600(OC)/1866(OC)
No admite DIMM registrados o DIMM compatibles con ECC
Integrados en el conjunto de chips AMD 880G
Memoria máxima de vídeo compartida de 512
MB
Admite DVI/HDMI/HDCP/UVD2
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 6 Gb/s.
Compatible con la versión SATA 3.0.
Realtek RTL 8111E
Negociación de 10 / 100 / 1000 Mb/s
Funciones Half / Full dúplex
ALC662
Salida de sonido de 5.1 canales
Soporte de sonido Alta Definición
ITE 8728
Le ofrece las funcionalidades heredadas de uso más común Súper E/S.
Interfaz de cuenta Low Pin
Iniciativas de control de entorno,
Monitor hardware
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR3 x 2
Capacidad máxima de memoria de 8GB
Cada DIMM admite DDR de 512MB y
1GB/2GB/4GB
Módulo de memoria DDR3 de canal Doble
Admite DDR3 de 800/1066/1333/
1600(OC)/1866(OC)
No admite DIMM registrados o DIMM compatibles con ECC
Integrados en el conjunto de chips AMD 880G
Memoria máxima de vídeo compartida de 512
MB
Admite DVI/HDMI/HDCP/UVD2
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 6 Gb/s.
Compatible con la versión SATA 3.0.
Realtek RTL 8111E
Negociación de 10 / 100 / 1000 Mb/s
Funciones Half / Full dúplex
ALC662
Salida de sonido de 5.1 canales
Soporte de sonido Alta Definición
ASM1042 N/A
Ranuras
Ranura PCI Express Gen2 x16
Ranura PCI
X1
X2
Ranura PCI Express Gen2 x16
Ranura PCI
X1
X2
38
A880GU3Z/A880GZ
Conectores en placa
Panel trasero de
E/S
Conector SATA
A880GU3Z
Conector de panel frontal
Conector de sonido frontal
Conector de salida S/PDIF
Cabecera de ventilador de CPU X1
Cabecera de ventilador de sistema X1
X4
X1
X1
X1
Cabecera de borrado de CMOS
Conector USB 2.0
Conector de alimentación
(24 patillas)
X1
X2
X1
X1 Conector de alimentación
(4 patillas)
Conector de IR del consumidor
Conector Puerto de impresora
Conector Puerto serie
Teclado / Ratón PS/2
X1
X1
X1
X1
Ratón HDMI
Puerto VGA
Puerto DVI-D
Puerto de red local
Puerto USB 2.0 (por SB850)
Puerto USB 3.0 (por ASM1042)
Conector de sonido
X1
X1
X1
X1
X2
X2
X3
Tamaño de la placa
200 mm. (A) X 244 Mm. (H)
Funciones especiales
Soporte de sistema operativo
Admite RAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
Biostar se reserva el derecho de añadir o retirar
Conector SATA
A880GZ
Conector de panel frontal
Conector de sonido frontal
Conector de salida S/PDIF
Cabecera de ventilador de CPU X1
Cabecera de ventilador de sistema X1
X4
X1
X1
X1
Cabecera de borrado de CMOS
Conector USB 2.0
Conector de alimentación
(24 patillas)
Conector de alimentación
(4 patillas)
Conector de IR del consumidor
Conector Puerto de impresora
Conector Puerto serie
Teclado / Ratón PS/2
Ratón HDMI
Puerto VGA
Puerto DVI-D
Puerto de red local
Puerto USB 2.0
Conector de sonido
200 mm. (A) X 244 Mm. (H)
Admite RAID 0 / 1 / 5 / 10
X1
X2
X1
X1
X1
X1
X1
X1
X1
X1
X1
X1
X4
X3
Windows XP / Vista / 7
Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.
39
Motherboard Manual
P
ORTUGUESE
CPU
FSB
Especificaç
ão Super
I/O
Memória principal
Placa gráfica
LAN
Chipset
SATA 3
A880GU3Z
Socket AM3+
Processadores AMD Sempron/Athlon II/Phenom
II/FX
A arquitectura AMD 64 permite uma computação de 32 e 64 bits
Suporta as tecnologias Hyper Transport 3.0 e
Cool’n’Quiet
(Watt máximo: 125W)
Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.2 GT/s
AMD 880G
AMD SB850
ITE 8728
Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.
Interface LPC (Low Pin Count).
Iniciativas para controlo do ambiente
Monitorização do hardware
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR3 x 2
Capacidade máxima de memória: 8 GB
Cada módulo DIMM suporta uma memória
DDR3 de 512 MB & 1 GB/2 GB/4 GB
Módulo de memória DDR3 de canal duplo
Suporta módulos DDR3 800/1066/1333/
1600(OC)/1866(OC)
Os módulos DIMM registados e os DIMM ECC não são suportados
Integrada no chipset AMD 880G
Memória de vídeo máxima partilhada: 512 MB
Suporta as funções DVI/HDMI/HDCP/UVD2
Controlador Serial ATA integrado
Velocidades de transmissão de dados até 6
Gb/s.
Compatibilidade com a especificação SATA versão 3.0.
Realtek RTL 8111E
Auto negociação de 10 / 100 / 1000 Mb/s
Capacidade semi/full-duplex
Suporte para áudio de alta definição
ALC662
Saída de áudio de 5.1 canais
Suporta a especificação High-Definition Audio
USB3.0
Ranhuras
A880GZ
Socket AM3+
Processadores AMD Sempron/Athlon II/Phenom
II/FX
A arquitectura AMD 64 permite uma computação de 32 e 64 bits
Suporta as tecnologias Hyper Transport 3.0 e
Cool’n’Quiet
(Watt máximo: 125W)
Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.2 GT/s
AMD 880G
AMD SB850
ITE 8728
Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.
Interface LPC (Low Pin Count).
Iniciativas para controlo do ambiente
Monitorização do hardware
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR3 x 2
Capacidade máxima de memória: 8 GB
Cada módulo DIMM suporta uma memória
DDR3 de 512 MB & 1 GB/2 GB/4 GB
Módulo de memória DDR3 de canal duplo
Suporta módulos DDR3 800/1066/1333/
1600(OC)/1866(OC)
Os módulos DIMM registados e os DIMM ECC não são suportados
Integrada no chipset AMD 880G
Memória de vídeo máxima partilhada: 512 MB
Suporta as funções DVI/HDMI/HDCP/UVD2
Controlador Serial ATA integrado
Velocidades de transmissão de dados até 6
Gb/s.
Compatibilidade com a especificação SATA versão 3.0.
Realtek RTL 8111E
Auto negociação de 10 / 100 / 1000 Mb/s
Capacidade semi/full-duplex
ALC662
Saída de áudio de 5.1 canais
Suporta a especificação High-Definition Audio
ASM1042 N/A
Ranhura PCI Express Gen2 x16 x1 Ranhura PCI Express Gen2 x16 x1
Ranhura PCI x2 Ranhura PCI x2
40
Conectores na placa
Entradas/S aídas no painel traseiro
A880GU3Z
Conector SATA
Conector do painel frontal
Conector de áudio frontal
Conector de saída S/PDIF
Conector da ventoinha da CPU
Conector da ventoinha do sistema x1
Conector para limpeza do CMOS x1
Conector USB 2.0
Conector de alimentação x2 x1
(24 pinos)
Conector de alimentação
(4 pinos)
Conector de IR do consumidor x1
Conector da para impressora
Conector da Porta série
Teclado / Rato PS/2
Porta HDMI x1 x1 x1 x1
Porta VGA
Porta DVI-D
Porta LAN x1 x1 x1 x1
Porta USB 2.0 (por SB850)
Porta USB 3.0 (por ASM1042)
Tomada de áudio x4 x1 x1 x1 x1 x2 x2 x3
Tamanho da placa
Característi cas especiais
200 mm (L) X 244 mm (A)
Suporta as funções RAID 0 / 1 / 5 / 10
Sistemas operativos suportados
Windows XP / Vista / 7
A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio.
A880GU3Z/A880GZ
A880GZ
Conector SATA
Conector do painel frontal
Conector de áudio frontal
Conector de saída S/PDIF
Conector da ventoinha da CPU
Conector da ventoinha do sistema x1
Conector para limpeza do CMOS x1
Conector USB 2.0
Conector de alimentação x2 x1
(24 pinos)
Conector de alimentação
(4 pinos)
Conector de IR do consumidor
Conector da para impressora
Conector da Porta série x1 x1 x1 x1 x4 x1 x1 x1 x1
Teclado / Rato PS/2
Porta HDMI
Porta VGA
Porta DVI-D
Porta LAN
Porta USB 2.0
Tomada de áudio
200 mm (L) X 244 mm (A) x1 x1 x1 x1 x1 x4 x3
Suporta as funções RAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio.
41
Motherboard Manual
P
OLISH
FSB
Procesor
A880GU3Z
Socket AM3+
AMD Sempron/Athlon II/Phenom II/FX
Procesory
Architektura AMD 64 umożliwia przetwarzanie
32 i 64 bitowe
Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet
(Maksymalny Watt: 125W)
Socket AM3+
A880GZ
AMD Sempron/Athlon II/Phenom II/FX
Procesory
Architektura AMD 64 umożliwia przetwarzanie
32 i 64 bitowe
Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet
(Maksymalny Watt: 125W)
Obsługa HyperTransport 3.0 o szerokości pasma do 5.2 GT/s
Obsługa HyperTransport 3.0 o szerokości pasma do 5.2 GT/s
Chipset
Pamięć główna
Super I/O
Grafika
SATA 3
LAN
Obsługa audio HD
USB3.0
AMD 880G
AMD SB850
Gniazda DDR3 DIMM x 2
Maks. wielkość pamięci 8GB
Każde gniazdo DIMM obsługuje moduły 512MB oraz 1GB/2GB/4GB DDR3
Moduł pamięci DDR3 z trybem podwójnego kanału
Obsługa DDR3 800/1066/1333/
1600(OC)/1866(OC)
Brak obsługi Registered DIMM oraz ECC DIMM
AMD 880G
AMD SB850
Gniazda DDR3 DIMM x 2
Maks. wielkość pamięci 8GB
Każde gniazdo DIMM obsługuje moduły 512MB oraz 1GB/2GB/4GB DDR3
Moduł pamięci DDR3 z trybem podwójnego kanału
Obsługa DDR3 800/1066/1333/
1600(OC)/1866(OC)
Brak obsługi Registered DIMM oraz ECC DIMM
ITE 8728
Zapewnia najbardziej powszechne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Monitor H/W
Funkcja ITE "Smart Guardian"
ITE 8728
Zapewnia najbardziej powszechne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Monitor H/W
Funkcja ITE "Smart Guardian"
Zintegrowana w chipsecie AMD 880G
Maks. wielkość współdzielonej pamięci video wynosi 512 MB
Obsługa DVI/HDMI/HDCP/UVD2
Zintegrowany kontroler Serial ATA
Transfer danych do 6 Gb/s.
Zgodność ze specyfikacją SATA w wersji 3.0.
Realtek RTL 8111E
110 / 100 / 1000 Mb/s z automatyczną negocjacją szybkości
Działanie w trybie połowicznego / pełnego dupleksu
ALC662
5.1 kanałowe wyjście audio
Obsługa High-Definition Audio
Zintegrowana w chipsecie AMD 880G
Maks. wielkość współdzielonej pamięci video wynosi 512 MB
Obsługa DVI/HDMI/HDCP/UVD2
Zintegrowany kontroler Serial ATA
Transfer danych do 6 Gb/s.
Zgodność ze specyfikacją SATA w wersji 3.0.
Realtek RTL 8111E
110 / 100 / 1000 Mb/s z automatyczną negocjacją szybkości
Działanie w trybie połowicznego / pełnego dupleksu
ALC662
5.1 kanałowe wyjście audio
Obsługa High-Definition Audio
ASM1042 N/A
Gniazda
Gniazdo PCI Express Gen2 x16
Gniazdo PCI x1 x2
Gniazdo PCI Express Gen2 x16
Gniazdo PCI x1 x2
42
Złącza wbudowan e
Back Panel
I/O
A880GU3Z/A880GZ
A880GU3Z A880GZ
Złącze SATA
Złącze panela przedniego
Przednie złącze audio
Złącze wyjścia S/PDIF x4 x1 x1 x1
Złącze SATA
Złącze panela przedniego
Przednie złącze audio
Złącze wyjścia S/PDIF x4 x1 x1 x1
Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora procesora x1
Złącze główkowe wentylatora systemowego x1 Złącze główkowe wentylatora systemowego x1
Złącze główkowe kasowania CMOS x1
Złącze USB 2.0 x2
Złącze zasilania (24 pinowe) x1
Złącze zasilania (4 pinowe)
Złącze Konsument IR
Złącze Port drukarki
Złącze Port szeregowy x1 x1 x1 x1
Złącze główkowe kasowania CMOS x1
Złącze USB 2.0
Złącze zasilania (24 pinowe)
Złącze zasilania (4 pinowe)
Złącze Konsument IR
Złącze Port drukarki
Złącze Port szeregowy x2 x1 x1 x1 x1 x1
Klawiatura / Mysz PS/2
Port HDMI
Port VGA
Port DVI-D
Port LAN
Port USB 2.0 (przez SB850)
Port USB 3.0 (przez ASM1042)
Gniazdo audio x1 x1 x1 x1 x1 x2 x2 x3
Klawiatura / Mysz PS/2
Port HDMI
Port VGA
Port DVI-D
Port LAN
Port USB 2.0
Gniazdo audio x1 x1 x1 x1 x1 x4 x3
Wymiary płyty
Funkcje specjalne
Obsluga systemu operacyjne go
200 mm (S) X 244 mm (W)
Obsługa RAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.
200 mm (S) X 244 mm (W)
Obsługa RAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.
43
Motherboard Manual
R
USSIAN
CPU
(центральны й процессор)
FSB
Набор микросхем
A880GU3Z
Гнездо AM3+
Процессоры AMD Sempron/Athlon II/Phenom
II/FX
Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит
Поддержка Hyper Transport 3.0 и Cool’n’Quiet
(Максимальный ватт: 125W)
Поддержка HyperTransport 3.0 с пропускной способностью до 5.2 GT/s
AMD 880G
AMD SB850
Гнездо AM3+
A880GZ
Процессоры AMD Sempron/Athlon II/Phenom
II/FX
Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит
Поддержка Hyper Transport 3.0 и Cool’n’Quiet
(Максимальный ватт: 125W)
Поддержка HyperTransport 3.0 с пропускной способностью до 5.2 GT/s
AMD 880G
AMD SB850
Основная память
Super I/O
Графика
SATA 3
Локальная сеть
Слоты DDR3 DIMM x 2
Максимальная ёмкость памяти 8 ГБ
Каждый модуль DIMM поддерживает 512МБ
& 1ГБ/2ГБ/4ГБ DDR3
Модуль памяти с двухканальным режимом
DDR3
Поддержка DDR3 800/1066/1333/
1600(OC)/1866(OC)
Не поддерживает зарегистрированные модули DIMM and ECC DIMM
Слоты DDR3 DIMM x 2
Максимальная ёмкость памяти 8 ГБ
Каждый модуль DIMM поддерживает 512МБ
& 1ГБ/2ГБ/4ГБ DDR3
Модуль памяти с двухканальным режимом
DDR3
Поддержка DDR3 800/1066/1333/
1600(OC)/1866(OC)
Не поддерживает зарегистрированные модули DIMM and ECC DIMM
ITE 8728
Обеспечивает наиболее используемые действующие функциональные возможности Super I/O.
Интерфейс с низким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
Встроенная в набор микросхем AMD 880G
Максимальная совместно используемая видео память составляет 512 МБ
Поддержка DVI/HDMI/HDCP/UVD2
Встроенное последовательное устройство управления ATA скорость передачи данных до 6 гигабит/с.
Соответствие спецификации SATA версия
3.0.
ITE 8728
Обеспечивает наиболее используемые действующие функциональные возможности Super I/O.
Интерфейс с низким количеством выводов
Инициативы по охране окружающей среды,
Аппаратный монитор
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
Встроенная в набор микросхем AMD 880G
Максимальная совместно используемая видео память составляет 512 МБ
Поддержка DVI/HDMI/HDCP/UVD2
Встроенное последовательное устройство управления ATA скорость передачи данных до 6 гигабит/с.
Соответствие спецификации SATA версия
3.0.
Realtek RTL 8111E
Автоматическое согласование 10 / 100 /
1000 Мб/с
Частичная / полная дуплексная способность
Realtek RTL 8111E
Автоматическое согласование 10 / 100 /
1000 Мб/с
Частичная / полная дуплексная способность
Звуковая поддержка жесткого диска
ALC662
Звуковая поддержка High-Definition
5.1канальный звуковой выход
ALC662
Звуковая поддержка High-Definition
5.1канальный звуковой выход
USB3.0
Слоты
ASM1042 N/A
Слот PCI Express Gen2 x16
Слот PCI x1 x2
Слот PCI Express Gen2 x16
Слот PCI x1 x2
44
A880GU3Z/A880GZ
A880GU3Z A880GZ
Разъём SATA x4 Разъём SATA x4
Разъём на лицевой панели x1 Разъём на лицевой панели x1
Входной звуковой разъём x1 Входной звуковой разъём x1
Разъём вывода для S/PDIF
Контактирующее приспособление x1 вентилятора центрального
Разъём вывода для S/PDIF
Контактирующее приспособление вентилятора центрального x1
Встроенный разъём
Контактирующее приспособление
Открытое контактирующее приспособление CMOS x1
Контактирующее приспособление
Открытое контактирующее приспособление CMOS x1
Разъем питания (24 вывод) x1 Разъем питания (24 вывод) x1
Разъем питания (4 вывод) x1 Разъем питания (4 вывод) x1
Разъём Порт подключения
Задняя панель средств ввода-вывод а
Разъём Последовательный порт x1
Клавиатура / Мышь PS/2
Порт HDMI
Порт VGA
Порт DVI-D
Порт LAN
USB 2.0-порт (по SB850)
USB 3.0-порт (по ASM1042)
Гнездо для подключения x1 x1 x1 x1 x1 x2 x2
Разъём Порт подключения
Разъём Последовательный порт x1
Клавиатура / Мышь PS/2
Порт HDMI
Порт VGA x1 x1 x1
Порт DVI-D
Порт LAN x1 x1
USB 2.0-порт x4
Гнездо для подключения
Размер панели
Специальные технические характеристи ки
Поддержка RAID 0 / 1 / 5 / 10
Поддержка
OS
Поддержка RAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или без предварительного уведомления.
Windows XP / Vista / 7
Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или без предварительного уведомления.
45
Motherboard Manual
A
RABIC
A880GZ
ﺲﺒﻘﻣA ﺲﺒﻘﻣ AM3+
تﺎﺠﻟﺎﻌﻣAMD Sempron/Athlon II/Phenom II/FX
ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺖﺏ 64 و 32 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyper Transport 3.0
و Cool’n’Quiet
(طاو ىﻮ ﺼﻗ: 125و)
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyperTransport 3.0
ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 5.2 GT/s
A880GU3Z
ﺲﺒﻘﻣAM3+
تﺎﺠﻟﺎﻌﻣAMD Sempron/Athlon II/Phenom II/FX
ﺔﻴﻨﻘﺗ ﻦﻜﻤﺗAMD 64 ﺖﺏ 64 و 32 ﺔﻋﺮﺴﺏ ﺔﻴﺏﻮﺳﺎﺤﻟا تﺎﻴﻠﻤﻌﻟا ءاﺮﺝإ
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyper Transport 3.0
و Cool’n’Quiet
(طاو ىﻮ ﺼﻗ: 125و)
ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو
ﺔیﺰآﺮﻤﻟا
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗHyperTransport 3.0
ﻰﻟإ ﻞﺼی ددﺮﺘﺏ 5.2 GT/s ﻲﺒﻥﺎﺠﻟا ﻲﻣﺎﻣﻷا ﻞﻗﺎﻨﻟا
AMD 880G
AMD SB850
ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻣ
AMD 880G
AMD SB850
ITE 8728
ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎﻣاﺪﺨﺘﺳا ﺮﺜآﻷا
ﺔﻴﻨﻘﺗ ﻢﻋﺪ ﺗ Low Pin Count Interface
: ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو
ةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌ ﻤﻟ ﺐﻗاﺮﻣ
ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE
2 دﺪﻋ DDR3 DIMM ﺔﺤﺘﻓ
ﺖیﺎﺏ ﺎﺠﻴﺝ 8 ى ﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ
ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ 512 ﺖیﺎﺏ ﺎﺠﻴﻣ
ﺖیﺎﺏ ﺎﺠﻴﺝ 4 و / 2 و / 1 و
ةﺮآاذ ةﺪﺡوDDR3 ةﺎﻨ ﻘﻟا ﺔﺝودﺰﻣ
عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ
ﺖیﺎﺏ ﺎﺠﻴﻣ ( OC ) 1866 /( OC ) 1600 / 1333 / 1066 / 800
ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC
ITE 8728
ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O ًﺎﻣاﺪﺨﺘﺳا ﺮﺜآﻷا
ﺔﻴﻨﻘﺗ ﻢﻋﺪ ﺗ Low Pin Count Interface
: ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو
ةﺰﻬﺝﻷا ﺔﻟﺎﺡ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻣ
ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE
2 دﺪﻋ DDR3 DIMM ﺔ ﺤﺘﻓ
ﺖیﺎﺏ ﺎﺠﻴﺝ 8 ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ
ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻥ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ 512 ﺖیﺎﺏ ﺎﺠﻴﻣ
ﺖیﺎﺏ ﺎﺠﻴﺝ 4 و / 2 و / 1 و
ةﺮآاذ ةﺪﺡوDDR3 ةﺎﻨ ﻘﻟا ﺔﺝودﺰﻣ
عﻮﻥ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗDDR3 تﺎﻌﺳ
ﺖیﺎﺏ ﺎﺠﻴﻣ ( OC ) 1866 /( OC ) 1600 / 1333 / 1066 / 800
ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC
Super I/O
ﺔﻴﺴﻴﺋﺮﻟا ةﺮآاﺬﻟا
ﻖﺋﺎﻗر ﻲﻓ ﺔﺠﻣﺪﻣ AMD 880G
ﻮیﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ ﺖیﺎﺏ ﺎﺠﻴﻣ
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗDVI/HDMI/HDCP/UVD2
ﻖﺋﺎﻗر ﻲﻓ ﺔﺠﻣﺪﻣ AMD 880G
ﻮیﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ ﺖیﺎﺏ ﺎﺠﻴﻣ
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗDVI/HDMI/HDCP/UVD2
تﺎﻣﻮﺳﺮﻟا ﺔﻗﺎﻄﺏ
ﻞﻣﺎﻜﺘﻣ
ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ 6 .
ﺔﻴﻥﺎﺙ / ﺖﺏﺎﺠﻴﺝ
ﺔﻘﺏﺎﻄﻣ راﺪﺹﻹا 3.0.
Realtek RTL 8111E
ﺔﻴﻥﺎﺙ / ﺖﺏ ﺎﺠﻴﺝ 1 و ﺔﻴﻥﺎﺙ / ﺖیﺎﺏ ﺎﺠﻴﻣ 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ
ﻞﻣﺎﻜﺘﻣ
ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺏ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ 6 .
ﺔﻴﻥﺎﺙ / ﺖﺏﺎﺠﻴﺝ SATA 3
ﺔﻘﺏﺎﻄﻣ راﺪﺹﻹا 3.0.
Realtek RTL 8111E
ﺔﻴﻥﺎﺙ / ﺖﺏ ﺎﺠﻴﺝ 1 و ﺔﻴﻥﺎﺙ / ﺖیﺎﺏ ﺎﺠﻴﻣ 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ
ﻲﻔﺼﻨﻟا / ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ
ﺔﻴﻠﺥاد ﺔﻜﺒﺵ
ﻲﻔﺼﻨﻟا / ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻣإ
ALC662
5.1
تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ
ﻦ ﻣ ﻒیﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗ
N/A
ALC662
5.1
تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ
ﻲﻟﺎﻋ تﻮﺼﻟا ﻢﻋد
ﻦﻣ ﻒیﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗ
ASM1042 USB3.0
ﻒیﺮﻌﺘﻟا
1
2
دﺪﻋ
دﺪﻋ
PCI Express Gen2 x16
PCI
ﺔﺤﺘﻓ
ﺔﺤﺘﻓ
1
2
دﺪﻋ
دﺪﻋ
PCI Express Gen2 x16
PCI
ﺔﺤﺘﻓ
ﺔﺤﺘﻓ
تﺎﺤﺘﻔﻟا
46
2 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
A880GZ
4 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
SATA ﺬﻔﻨﻣ
ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮﻠﻟا ﺬﻔﻨﻣ
ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ
1 دﺪﻋ S/PDIF جﺮﺥ ﺬﻔﻨﻣ
1 دﺪﻋ ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو
1
1
دﺪﻋ
دﺪﻋ
مﺎﻈﻨﻟ ا ﺔﺡوﺮﻣ ﺔﻠﺹو
CMOS ﺢﺴﻣ ﺔﻠﺹو
USB 2.0
ﺬﻔﻨﻣ
( سﻮﺏد 24 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ
( سﻮﺏد 4 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ
ﺔﻜﻠﻬﺘ ﺴﻣ ﺖ ﺤﺗ ﺮﻤﺡﻷا ﺬﻔﻨﻣ
ﺔﻌﺏﺎﻃ ﺬﻔﻨﻣ
ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ
A880GU3Z/A880GZ
1
1
2
1
دﺪﻋ
دﺪﻋ
دﺪﻋ
دﺪﻋ
A880GU3Z
4 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
SATA ﺬﻔﻨﻣ
ﺔﻴﻣﺎﻣﻷا ﺔﺡﻮﻠﻟا ﺬﻔﻨﻣ
ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ
1 دﺪﻋ S/PDIF جﺮﺥ ﺬﻔﻨﻣ
1 دﺪﻋ ﺔیﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺡو ﺔﺡوﺮﻣ ﺔﻠﺹو
مﺎﻈﻨﻟا ﺔﺡوﺮﻣ ﺔﻠﺹو
CMOS ﺢﺴﻣ ﺔﻠﺹو
USB 2.0
ﺬﻔﻨﻣ
( سﻮﺏد 24 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ
1 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
1 دﺪﻋ
( سﻮﺏد 4 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺗ ﺬﻔﻨﻣ
ﺔﻜﻠﻬﺘ ﺴﻣ ﺖ ﺤﺗ ﺮﻤﺡﻷا ﺬﻔﻨﻣ
ﺔﻌﺏﺎﻃ ﺬﻔﻨﻣ
ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ
ﺢﻄﺳ ﻰﻠﻋ ﺬﻓﺎﻨﻤﻟا
ﺔﺡﻮﻠﻟا
1
1
1
1
1
4
3
دﺪﻋ
دﺪﻋ
دﺪﻋ
دﺪﻋ
دﺪﻋ
دﺪﻋ
دﺪﻋ
PS/2 سوﺎﻣ / ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟ
HDMI ﺬﻓﺎﻨﻣ
VGA ﺬﻓﺎﻨﻣ
DVI-D ﺬﻓﺎﻨﻣ
ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ
2.0
USB ﺬﻓﺎﻨﻣ
تﻮﺹ ﺲﺒﻘﻣ
( عﺎﻔﺗرا ) ﻢﻣ 244 X ( ضﺮﻋ ) ﻢﻣ 200
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗRAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ
.
رﺎﻄﺥإ نوﺪﺏ
1
1
1
1
1
دﺪﻋ
دﺪﻋ
دﺪﻋ
دﺪﻋ
دﺪﻋ
PS/2 سوﺎﻣ / ﺢﻴﺗﺎﻔﻣ ﺔﺡﻮﻟ
HDMI ﺬﻓﺎﻨﻣ
VGA ﺬﻓﺎﻨﻣ
DVI-D ﺬﻓﺎﻨﻣ
ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺵ ﺬﻔﻨﻣ
جﺮﺧ / ﻞﺧد ﺬﻓﺎﻨﻡ
ﺔﻴﻔﻠﺨﻟا ﺔﺡﻮﻠﻟا
2 دﺪﻋ (SB850 ﻦﻣ ﻞ ﺒﻗ ) USB 2.0
ﺬﻓﺎﻨﻣ
2 دﺪﻋ (ASM1042 ﻦﻣ ﻞ ﺒﻗ ) U SB3.0
ﺬﻓﺎﻨﻣ
3 دﺪﻋ تﻮﺹ ﺲﺒﻘﻣ
ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗRAID 0 / 1 / 5 / 10
Windows XP / Vista / 7
ﻆﻔﺘﺤﺗBiostar وأ رﺎﻄﺥﺈﺏ ﻞﻴﻐﺸﺗ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺏ
.
رﺎﻄﺥإ نوﺪﺏ
ﺔﺡﻮﻠﻟا ﻢﺠﺡ
ﺔﺹﺎﺥ ﺎیاﺰﻣ
ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻥأ ﻢﻋد
47
Motherboard Manual
J
APANESE
CPU
FSB
A880GU3Z A880GZ
Socket AM3+
AMD Sempron/Athlon II/Phenom II/FX プロセッ
サ
AMD 64アーキテクチャでは、32ビットと64ビット計
算が可能です
ハイパートランスポート
3.0とクールアンドクワイア
ットをサポートします
(最高のワット: 125W)
5.2 GT/sのバンド幅までハイパートランスポート3.0
をサポートします
Socket AM3+
AMD Sempron/Athlon II/Phenom II/FX プロセッ
サ
AMD 64アーキテクチャでは、32ビットと64ビット計
算が可能です
ハイパートランスポート
3.0とクールアンドクワイア
ットをサポートします
(最高のワット: 125W)
5.2 GT/sのバンド幅までハイパートランスポート3.0
をサポートします
チップセッ
ト
リ
メインメモ
Super I/O
グラフィッ
クス
SATA 3
LAN
AMD 880G
AMD SB850
DDR3 DIMMスロット x 2
最大メモリ容量 8GB
各
DIMMは 512MB & 1GB/2GB/4GB DDR3をサポ
ート
デュアル
チャンネルモードDDR3メモリモジュール
DDR3 800/1066/1333/1600(OC)/1866(OC) を
サポート
登録済み DIMMとECC DIMMはサポートされません
ITE 8728
もっとも一般に使用されるレガシー Super I/O機能を
採用しています。
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
H/Wモニター
ITEの「スマートガーディアン」機能
AMD 880Gチップセットに統合
最大の共有ビデオメモリは 512MBです
DVI/HDMI/HDCP/UVD2 のサポート
統合シリアル ATAコントローラ
最高 6Gb/秒のデータ転送速度
SATAバージョン3.0仕様に準拠。
Realtek RTL 8111E
10 / 100 / 1000 Mb/秒のオートネゴシエーション
半 /全二重機能
AMD 880G
AMD SB850
DDR3 DIMMスロット x 2
最大メモリ容量 8GB
各
DIMMは 512MB & 1GB/2GB/4GB DDR3をサポ
ート
デュアル
チャンネルモードDDR3メモリモジュール
DDR3 800/1066/1333/1600(OC)/1866(OC) を
サポート
登録済み DIMMとECC DIMMはサポートされません
ITE 8728
もっとも一般に使用されるレガシー Super I/O機能を
採用しています。
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
H/Wモニター
ITEの「スマートガーディアン」機能
AMD 880Gチップセットに統合
最大の共有ビデオメモリは 512MBです
DVI/HDMI/HDCP/UVD2 のサポート
統合シリアル ATAコントローラ
最高 6Gb/秒のデータ転送速度
SATAバージョン3.0仕様に準拠。
Realtek RTL 8111E
10 / 100 / 1000 Mb/秒のオートネゴシエーション
半 /全二重機能
HDオーディ
オのサポー
ト
ALC662
5.1チャンネルオーディオアウト
ハイデフィニションオーディオのサポート
USB3.0 ASM1042
PCI Express Gen2 x16スロット
スロット x1
ALC662
5.1チャンネルオーディオアウト
ハイデフィニションオーディオのサポート
N/A
PCI Express Gen2 x16スロット x1
48
A880GU3Z
A880GU3Z/A880GZ
A880GZ
フロントパネルコネクタ x1 x1
フロントオーディオコネクタ x1 フロントオーディオコネクタ x1
S/PDIFアウトコネクタ x1 S/PDIFアウトコネクタ x1
オンボード
コネクタ
システムファンヘッダ x1 x1
電源コネクタ (24ピン)
電源コネクタ (4ピン) x1 x1
電源コネクタ (24ピン)
電源コネクタ (4ピン) x1 x1
消費者 IRコネクタ x1
プリンタポートコネクタ x1 x1
シリアルポートコネクタ x1 x1
背面パネル
I/O
USB 2.0ポート(で SB850)
USB 3.0ポート (で ASM1042)
オーディオジャック x2 x2
USB 2.0ポート x4
x3
x3
ボードサイ
200 mm (幅) X 244 mm (高さ)
ズ
特殊機能
OSサポート
RAID 0 / 1 / 5 / 10 のサポート
Windows XP / Vista / 7
Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。
200 mm (幅) X 244 mm (高さ)
RAID 0 / 1 / 5 / 10 のサポート
Windows XP / Vista / 7
Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。
2011/07/07
49
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Chapter 1: Introduction
- 3 Before You Start
- 3 Package Checklist
- 4 Motherboard Features
- 5 Rear Panel Connectors
- 6 Motherboard Layout
- 7 Chapter 2: Hardware Installation
- 7 Installing Central Processing Unit (CPU)
- 9 FAN Headers
- 10 Installing System Memory
- 12 Connectors and Slots
- 15 Headers & Jumpers Setup
- 15 How to Setup Jumpers
- 15 Detail Settings
- 20 Chapter 4: RAID Functions
- 20 Operating System
- 20 Raid Arrays
- 20 How RAID Works
- 24 Chapter 5: Useful Help
- 24 Driver Installation Note
- 25 Software
- 29 Extra Information
- 31 AMI BIOS Beep Code
- 32 Troubleshooting
- 34 Appendix: SPEC In Other Languages
- 34 German
- 36 French
- 38 Italian
- 40 Spanish
- 42 Portuguese
- 44 Polish
- 46 Russian
- 48 Arabic
- 50 Japanese