ENGLISH
● XL-E171DVH DVD Hi Fi Component System consisting of XL-E171DVH (main unit) and CP-E171 (speaker system).
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
Please confirm that the following accessories are included.
Video cable x 1
Remote control x 1
FM aerial x 1
AC Cord
“AAA” size battery
(UM-4, R03, HP-16 or similar) x 2
CONTENTS
Page
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . 2 - 4
Types of playable discs . . . . . . . . . . . . . . . . . . . . . . . . 5
Description of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Changing the setup menu . . . . . . . . . . . . . . . . . . . . 9 - 13
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the clock (Remote control only) . . . . . . . . . . . . 15
DVD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 16
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 17
Useful operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 19
Various settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Video CD and Super Video CD playback . . . . . . . 21 - 22
CD operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DivX/MP3/WMA (disc) operation and JPEG
(Disc/USB Video) operation . . . . . . . . . . . . . . . . . . . 23 - 25
CD or MP3/WMA disc Playback
MP3/WMA folder mode (disc) operation. . . . . . . . . . . . 26
USB
MP3/WMA playback (USB Audio Function) . . . . . 26 - 29
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Advanced Features
Using the Radio Data System (RDS) . . . . . . . . . 31 - 33
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 33 - 35
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 35
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . 36 - 37
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
E-1
11/8/24
08_XL-E171DVH_EN.fm
Precautions
■
General
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
10 cm (4") of free space along the sides, top and
back of the equipment.
10 cm (4")
10 cm (4")
10 cm (4")
10 cm (4")
● Use the unit on a firm, level surface free from vibration.
● Place the speakers at least 30 cm (12") away from any
CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than
60°C (140°F) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for safety.
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental aspects
of battery disposal.
● This unit should only be used within the range of
5°C - 35°C (41°F - 95°F).
● The apparatus is designed for use in moderate
climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
■
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Controls and indicators
1 2
3
4
5
6
7
■
8
9
10 11 12 13 14
Front panel
Page
1. Remote sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2. Timer indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .34
3. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
4. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . .14
5. On/Stand-by Button . . . . . . . . . . . . . . . . .14, 15, 30
6. FUNCTION Button . . . . . . . . . . . . . . . . . . .14, 26, 30
7. USB Terminal. . . . . . . . . . . . . . . . . . . . . . . . . .26, 27
E-2
11/8/24
08_XL-E171DVH_EN.fm
Page
8. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 35
9. Headphone Socket. . . . . . . . . . . . . . . . . . . . . . . . 35
10. Tuner Preset Down, CD/USB Track Down . . . . 27
11. Tuner Preset Up, CD/USB Track Up . . . . . . . . . 27
12. Disc/USB Stop Button . . . . . . . . . . . . . . . . 15,16,27
13. Disc/USB/Play or Pause Button . . . . . . . . 15,16,27
14. Disc Tray Open/Close Button . . . . . . . . . . . . . . . 15
1
2
3
4
5
6
7
8
Controls and indicators (continued)
■
1
Page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 8
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . 9, 15
3. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4. Memory Button. . . . . . . . . . . . . . . . . . . . . 16, 25, 30
5. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . 14
7. Direct Search Buttons . . . . . . . . . . . . . . . . . . 22, 23
8. Direct Button . . . . . . . . . . . . . . . . . . . 16, 17, 21, 23
9. Audio Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
10. A-B Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
11. Setup [VIDEO MODE] Button . . . . . . . . . . . . . . . . 9
12. ZOOM Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
13. Tuner Preset Down Button . . . . . . . . 15, 16, 21, 33
14. Slow Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
15. Tuning Down, Skip Down, Fast Reverse,
Time Down Button . . . . . . . . . . . . . . . 15, 16, 30, 31
16. CD/USB Stop Button . . . . . . . . . . . . . 15, 16, 22, 26
17. Top Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . 18
18. Cursor Button . . . . . . . . . . . . . . . . 9, 16, 18, 21, 22, 26
19. ENTER Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
20. Subtitle/Digest/Display Button . . . . . . . . . . . 20, 22
21. USB VIDEO/AUDIO Button . . . . . . . . . . . . . . . . . 26
22. DVD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
23. Tuner Button . . . . . . . . . . . . . . . . . . . . . . 30, 31, 32
24. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . 31
25. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
26. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 15
27. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . 34
28. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
29. Demo/Dimmer Button . . . . . . . . . . . . . . . . . . . . . 14
30. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . 18
31. OSD Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
32. ANGLE Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
33. Tuner Preset Up Button. . . . . . . . . . . 15, 16, 21, 33
34. STEP Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
35. Tuning Up, Skip Up, Fast Forward,
Time Up Button . . . . . . . . . . . . . . . . . 15, 16, 30, 31
36. Play/Pause Button . . . . . . . . . . . . . . . . . . 15, 21, 22
37. Menu/PBC Button . . . . . . . . . . . . . . . . . . . . . . . . 21
38. RETURN Button . . . . . . . . . . . . . . . . . . . . . . . . . . 18
39. Audio/Line (INPUT) Button . . . . . . . . . . . . . . . 8, 14
40. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . 31
41. RDS PTY Button . . . . . . . . . . . . . . . . . . . . . . . . . . 31
42. Volume Up/Down Button . . . . . . . . . . . . . . . . . . 14
26
2
3
4
5
6
27
28
29
7
8
9
10
11
12
13
14
15
16
17
18
30
31
32
33
34
35
36
37
19
20
21
22
23
24
25
38
39
40
41
42
E-3
11/8/24
08_XL-E171DVH_EN.fm
Remote control
Controls and indicators (continued)
9
1
2
3 4
5 6 78
17
18 19 20 21
22
■
15
10 1112 13 14 16
23 24 25 26
Page
1. USB Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5. RDM (Random) Indicator . . . . . . . . . . . . . . . . . . . 28
6. MEM (Memory) Indicator . . . . . . . . . . . . . . . . . . . 28
7. Repeat Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8. Repeat A-B Indicator . . . . . . . . . . . . . . . . . . . . . . 19
9. Play/Pause Indicator . . . . . . . . . . . . . . . . . . . . . . 16
10. Tuning FM/AM Indicator . . . . . . . . . . . . . . . . . . . 30
11. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . 30
12. Stereo Station Indicator . . . . . . . . . . . . . . . . . . . 30
13. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
14. PTYI Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
15. TP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
16. TA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
17. Muting Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 14
18. X-bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 14
19. Title Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
20. Artist Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
21. Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 26
22. Album Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 27
23. File Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
24. Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
25. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . 34
26. Once Timer Indicator . . . . . . . . . . . . . . . . . . . . . . 34
27. Disc Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
28. Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
29. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
30. DVD indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31. DivX indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
32. Dolby Digital indicator . . . . . . . . . . . . . . . . . . . . . 20
27 28 29
31 30 32
■
Speaker system
1. Tweeter
2. Woofer
3. Bass Reflex Duct
1
3
2
■
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragms when
you remove the speaker grilles.
E-4
11/8/24
08_XL-E171DVH_EN.fm
Display
1
2
3
4
5
6
7
8
Types of playable discs
The DVD player can play back discs bearing any of the
following marks:
Disc type
DVD Video Disc
Super Video CD
Disc contents
Audio and video
(movies)
2
Audio and video
(movies)
2
Video CD
Audio and video
(movies)
Audio CD
Audio
or
3
or
4
or
5
Icons used in this operation manual
Some functions may not be available depending on discs.
The following icons indicate the discs that can be used in
the section.
... Indicates DVDs.
... Indicates Super video CDs
... Indicates video CDs.
... Indicates audio CDs.
CD-R/CD-RW (*1)
Audio and picture
... Indicates CD-R/RW with JPEG recording.
... Indicates DivX® Video.
... Indicates MP3.
● Some operations may not be performed depending on
discs even if they are described in this manual.
● During operation, “ ” may be displayed on the screen.
This means that the operations described in this
manual are not possible.
Or CD-R/CD-RW recorded in
JPEG format (*2) (*3)
DivX® Video disc
Audio and video
(movies)
(*1): The CD-R/CD-RW may not be played back properly
depending on the recording equipment or the disc.
(*2): JPEG or JPG picture discs also play on this unit.
However, pictures may not be clear (depends on
resolution and recording method).
(*3): Maximum JPEG file size is 10Mb.
If photo bigger than this size, it will take some time for
the file to be displayed.
Copyright Information:
● Unauthorised copying, broadcast, public display,
transmission, public performance and rental
(regardless of whether or not such activities are for
profit) of disc contents are prohibited by law.
● This system is equipped with copy protection
technology that causes substantial degradation of
images when the contents of a disc are copied to a
videotape.
● For unplayable discs, see page 6.
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more
information and software tools to convert your files into
DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
(DivX® version cannot be upgraded on this product.)
E-5
11/8/24
08_XL-E171DVH_EN.fm
Description of discs
■
■
Discs that cannot be played
● DVDs without the region
number on the disc.
● DVDs with SECAM system
● DVD-ROM
● DVD-RAM
● DVD-Audio
●
●
●
●
●
Display
2
3
DVDs are divided into “titles” and “chapters”. If the disc has
more than one movie on it, each movie is a separate “title”.
“Chapters” are subdivisions of titles.
Track 2
Track 3
You can enjoy wide images on a wide-screen
TV and 4:3 images with the side edges cut on
the 4:3 size TV.
Type of subtitles
recorded
Example:
2: French
Track 5
Note:
Title, chapter or track numbers may not be recorded on
some discs.
■
DivX
● DivX Certified® to play DivX® video, including premium
content.
● DivX®, DivX Certified® and associated logos are
trademarks of DivX, Inc. and are used under license.
E-6
11/8/24
Recorded subtitle languages.
Language can be selected with
the SUBTITLE/DIGEST/DISPLAY
button.
1: English
Number of camera
angles
Chapter 1 Chapter 2
Track 4
To adopt the video format to the
connected TVs (“wide-screen TV”
or “4:3 size TV”).
You can enjoy wide images on a wide-screen
TV and letterbox size images on the 4:3 size
TV.
Title 2
Audio CDs consist of “tracks”.
A “track” is each tune on an audio CD.
Track 1
DVD discs are programmed with
region numbers indicating
countries in which they can be
played. This system can play
discs with region number on the
back of the unit.
Recorded in 4:3.
2
Chapter 1 Chapter 2 Chapter 3
4
Format recorded on
the DVD
Title, chapter and track
Title 1
Description
Region number
(playable area
number)
● The discs above cannot be played at all, or no sound is
heard although images appear on the screen or vice
versa.
● Incorrect operation may damage the speakers and can
have a negative effect on your hearing when played at
high volume settings.
● You cannot play illegally produced discs.
Notes:
● A disc which has scratches or fingerprints may not play
properly. Refer to “Care of compact discs” (page 37)
and clean the disc.
● Do not play the discs of special shapes (heart or
octagon shaped) as they can be ejected whilst rotating
and cause injury.
■
Icons used on DVD discs
Check the icons on the DVD case before playing your
discs.
CDG
CDV
CD-ROM
SACD
Discs recorded in
special formats, etc.
08_XL-E171DVH_EN.fm
2
Number of angles recorded on
the DVD.
Angles can be selected with the
ANGLE button.
Number of audio
tracks and audio
recording systems
The number of audio tracks and
audio recording systems are
indicated.
Example: ● The audio recorded on the
DVD can be switched by
1: Original
using the AUDIO button.
<English>
(Dolby
● The number of audio tracks
Digital 2
and recording systems vary
Surround)
depending on the DVD.
2: English
Check them in the DVD's
(Dolby
manual.
Digital 5.1
Surround)
1
2
3
4
5
6
7
8
System connections
Make sure to unplug the AC power lead before making any connections.
Right
speaker
FM aerial
Video cable
(not supplied)
TV
To video input socket
Left
speaker
Red
Black
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Label is located at the
bottom of the unit.
■
■
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
■
Speaker connection
● Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
● Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can damage
the unit.
● Do not mistake the right and the
Incorrect
left channels. The right speaker is
the one on the right side when you
face the unit.
● Do not let the bare speaker wires touch each other.
● Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
● Do not stand or sit on the speakers. You may be
injured.
■
08_XL-E171DVH_EN.fm
AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
E-7
11/8/24
Demonstration mode
● The first time the unit is plugged in, the unit will enter
the demonstration mode.
● To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power standby mode. The unit will enter the low power consumption
mode.
● To return to the demonstration mode, press the DEMO/
DIMMER button again.
Remote control
System connections (continued)
■
Connecting a TV, etc.
■
Connect to the TV using an audio cable.
TV
To audio
1 Open the battery cover.
2 Insert the supplied battery according to the direction
output sockets
indicated in the battery compartment.
When inserting or removing the battery, push it towards
the (–) battery terminals.
3 Close the cover.
Audio signal
Audio cable
(commercially
available)
To LINE input
sockets
Main unit
S-video cable
(commercially available)
Component video cable
(commercially available)
HDMI cable
(commercially available)
TV
To select Line In function:
● On main unit: Press FUNCTION button repeatedly until
Line In is displayed.
● On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
For better quality, you can also connect with S-video using
the S-VIDEO OUT jack.
If your TV also has a component video input or HDMI input,
you can connect this too.
Using the component video jacks:
Component video should deliver superior picture quality
when compared to composite video. A further advantage
is progressive-scan video, which delivers a very stable,
flicker-free picture. See the manuals that came with your
TV to check whether they are compatible with progressivescan video.
Using HDMI terminal:
If you have an HDMI or DVI (with HDCP) equipped TV, you
can connect it to this receiver using a commercially
available HDMI cable.
Note:
If the video signal does not appear on your TV, try
adjusting the resolution settings on your component or
display. Note that some video contents have resolutions
that may not be displayed. In this case, use a (analog)
composite connection.
Caution:
● Remove the battery if the unit will not be used for a long
period of time. This will prevent potential damage due
to battery leakage.
● Do not use rechargeable battery (nickel-cadmium
battery, etc.).
● Installing the battery incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
Notes concerning use:
● Replace the battery if the operating distance is reduced
or if the operation becomes erratic. Purchase a “AAA”
size battery (UM-4, R03, HP-16 or similar).
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
■
08_XL-E171DVH_EN.fm
Test of the remote control
Check the remote control after checking all the
connections.
Point the remote control directly at the remote sensor on
the unit. The remote control can be used within the range
shown below:
E-8
11/9/8
Battery installation
Remote sensor
0.2 m - 6 m
(8" - 20' )
1
2
3
4
5
6
7
8
Changing the setup menu
Turn on the TV, and switch the input to the “VIDEO 1”,
“VIDEO 2”, etc. accordingly.
3 Press the
or button to select a menu and press the
ENTER button.
● See the list on pages 9 - 13 for setup menu.
4 Press the
,
,
or button to change the setting
and press the ENTER button.
● See the list on pages 9 - 13 for the selectable
parameters.
5 Press the SETUP (VIDEO MODE) button.
● The setting is completed.
● To change other settings, begin from step 2.
Notes:
● During playback, “PREFERENCES” settings cannot be
changed.
● Settings are stored even if the unit is set to the standby mode.
● The backup function protects the stored settings for a
few hours should there be a power failure or the AC
power lead disconnection.
● If the startup screen is blurred, change the TV type in
the setup menu.
1 Press the ON/STAND-BY button to turn the power on.
● The startup screen appears.
● The startup screen does not appear
when the function is not set to disc or
USB video mode. Press the DVD
button or USB VIDEO/AUDIO button
repeatedly on remote control or
FUNCTION button on main unit
repeatedly to select DISC or USB
Video mode.
2 Press the SETUP (VIDEO MODE) button.
Setup
menu
GENERAL
SETUP
PAGE
Selectable parameters (* indicates default setting)
GENERAL
AUDIO
DOLBY
- - GENERAL SETUP PAGE - TV DISPLAY
ANGLE MARK
OSD LANGUAGE
SCREEN SAVER
LAST MEMORY
PS
ON
ENG
ON
OFF
GO TO GENERAL SETUP PAGE
VIDEO
PREFEREN.
TV DISPLAY 4:3 PANSCAN*
4:3 LETTERBOX
16:9
WIDE SQUEEZE
The screen mode should be set
according to the connected TV type
(for details, see page 12).
ANGLE
MARK
ON*
OFF
OSD
LANGUAGE
ENGLISH*
POLISH
CZECH
SLOVAK
SWEDISH
HUNGARIAN
GERMAN
You can select the desired OSD (On
Screen Display) language for the
setup menu or playback control
screen.
SCREEN
SAVER
ON*
A screen saver appears.
OFF
The screen saver disabled.
LAST
MEMORY
ON*
If accidentally push ON/STAND-BY
or OPEN/CLOSE button during
playback mode, you can resume
playback from the point playback is
stopped after power on back or you
push the OPEN/CLOSE button to
close the disc tray.
OFF
Last memory not function.
E-9
11/8/24
Description
08_XL-E171DVH_EN.fm
Changing the setup menu (continued)
Setup
menu
AUDIO
SETUP
PAGE
Selectable parameters (* indicates default setting)
GENERAL
AUDIO
DOLBY
VIDEO
PREFEREN.
- - AUDIO SETUP PAGE - ANALOG AUDIO
DIGITAL AUDIO
ANALOG
AUDIO
DOWNMIX
LT/RT
STEREO*
DIGITAL
AUDIO
DIGITAL
OUT
SPDIF OFF When playing a disc recorded with
SPDIF/RAW* Dolby Digital or DTS, the
SPDIF/PCM corresponding digital signals will be
output.
● PCM : Choose this setting if the
decorder cannot support Dolby
Digital or DTS.
● RAW : Choose this setting if the
decorder can support Dolby
Digital or DTS.
LPCM OUT
48KHZ*
96KHZ
GO TO AUDIO SETUP PAGE
DOLBY
DIGITAL
SETUP
GENERAL
AUDIO
DOLBY
- - DOLBY DIGITAL SETUP - -
DUAL MONO
DYNAMIC
VIDEO
PREFEREN.
Select the sampling frequency at
48 kHz/16 bit or 96 kHz/24 bit
capability after you select SPDIF/
PCM at SPDIF SETUP.
DUAL MONO STEREO*
L-MONO
R-MONO
MIX-MONO
DYNAMIC
(*1)
GO TO DOLBY DIGITAL SETUP
FULL
Audio with fully compressed
dynamic range.
3/4
1/2
1/4
Audio with partially compressed
dynamic range.
OFF*
Audio with uncompressed dynamic
range.
E-10
11/8/24
Description
08_XL-E171DVH_EN.fm
1
2
3
4
5
6
7
8
Changing the setup menu (continued)
Setup menu
VIDEO SETUP
PAGE
GENERAL
AUDIO
Selectable parameters (* indicates default setting)
VIDEO OUT
SVIDEO*
COMPONENT (*2)
DOLBY
VIDEO
PREFEREN.
- - VIDEO SETUP PAGE - VIDEO OUTPUT
Resolution
COLOR SETTING
DivX VOD
HDMI Setup
OFF
GO TO VIDEO SETUP PAGE
RESOLUTION 480I
480P
576I
576P
720P (50HZ)*
1080I (50HZ)
1080P (50HZ)
720P (60HZ)
1080I (60HZ)
1080P (60HZ)
COLOR
SHARPNESS HIGH
SETTING
MEDIUM*
LOW
BRIGHTNESS -20 –> 0* –> +20
CONTRAST
-16 –> 0* –> +16
GAMMA
HIGH
MEDIUM*
LOW
NONE
-9 –> 0* –> +9
HUE
Description
● SVIDEO:
Choose this setting for S-VIDEO
output.
● COMPONENT:
Choose this setting for
COMPONENT output.
● Please use the supplied Video
cable when adjusting video out
setting.
● S-Video output and component
output cannot be used
simultaneously.
● If S-Video output and
component output are not
connected, please use the
supplied video cable and check
the video out setting.
● Press and hold ANGLE button
to reset the resolution to default
setting.
SATURATION -9 –> 0* –> +9
LUMA DELAY 0T*
1T
DIVX (R) VOD OK
DIVX(R) VIDEO ON DEMAND
REGISTER
DEREGISTER
EXIT
HDMI SETUP
HDMI
AUDIO
SOURCE
PREFERENCE
PAGE
TV TYPE
GENERAL
AUDIO
DOLBY
VIDEO
PREFEREN.
- - PREFERENCE PAGE - TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
PAL
ENG
ENG
ENG
GO TO PREFERENCE PAGE
PBC
AUDIO
PAL*
AUTO
NTSC(*3)
ON*
OFF
ENGLISH*
POLISH
CZECH
SLOVAK
SWEDISH
HUNGARIAN
GERMAN
E-11
11/8/24
08_XL-E171DVH_EN.fm
SHARP provide you the DivX
registration code that allows you
to rent and purchase videos using
the DivX service. Please go to
www.divx.com/vod for more
information.
ON*
OFF
AUTO*
PCM
Please refer page 13.
Please refer page 21.
Select the language audible from
the speakers.
Changing the setup menu (continued)
Setup menu
Selectable parameters (* indicates default setting)
SUBTITLE
ENGLISH*
POLISH
CZECH
SLOVAK
SWEDISH
HUNGARIAN
GERMAN
OFF
DISC MENU
ENGLISH*
POLISH
CZECH
SLOVAK
SWEDISH
HUNGARIAN
GERMAN
PARENTAL
1 KID SAFE
2G
3 PG
4 PG 13
5 PGR
6R
7 NC 17
8 ADULT*
PASSWORD
PASSWORD
ON*
MODE
OFF
PASSWORD
CHANGE
DEFAULT
RESET
Description
Select the subtitle displayed on the
TV screen.
Set a restriction level for DVD
viewing. (For details, see page 13)
Select the password mode
condition.
See page 13 for password setting.
This resets all setting (Except for
Parental and Password) to factory
default.
(*1) Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in
DVD playback. Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital’s dynamic
range control allows you to adjust the sound range.
(*2) Your TV must be capable of handling progressive scanning and have component input capability.
(*3) NTSC is default TV TYPE for some countries only.
■
TV display setting
Indicator
4:3
PANSCAN
Setting
When playing a wide image
(16:9) disc, the left and right
sides of the image are cut
(pan scan) to display a
natural-looking 4:3 size
image.
A wide image disc without
pan scan
is played back
in 4:3 letterbox.
A 4:3 disc is played in 4:3.
Indicator
16:9
WIDE
SQUEEZE
4:3
When playing a wide image
LETTERBOX (16:9) disc, black bands are
inserted at the top and
bottom and you can enjoy
full wide images (16:9) on a
4:3 size TV.
A 4:3 disc is played in 4:3.
Setting
A wide image (16:9) is
displayed when playing a
wide image (16:9) disc.
● When playing a 4:3 image disc, the image
size depends on the setting of the
connected TV.
● If you play back a wide image (16:9) disc
with this unit connected to a 4:3 TV, the
vertically shrunk image is displayed.
When play 4:3 disc with this
unit connected to a 16:9 TV
(wide screen TV), the
horizontally expended
image is displayed. If you
use this setting, a natural
looking image 4:3 size can
be viewed with the black
bands are inserted at the left
and right of the screen.
● If you playback a wide image (16:9) disc
with 4:3 TV, the vertically shrunk image is
displayed.
Note:
When playing the disc with a fixed video format, it will not
change even if the TV screen size is changed.
E-12
11/8/24
08_XL-E171DVH_EN.fm
1
2
3
4
5
6
7
8
Changing the setup menu (continued)
■
■ Parental setting
1 Select “PREFERENCE” on the setup menu screen (see
TV type setting
Indicator
AUTO
Setting
steps 1 - 3 on page 9).
NTSC
Select this mode for the NTSC TV.
PAL
Select this mode for the PAL TV.
■
2 After selecting “PARENTAL” in step 4 on page 12, select
Select this mode for the multi-system TV.
the parental level and press the ENTER button.
3 Enter a 6-digit password using the Direct Search
buttons and press the ENTER button.
* If this is the first time, enter “000000”.
Language setting
Indicator
Setting
OSD
A language for screen display can be set for
LANGUAGE the setup menu, messages, etc.
English
AUDIO
DVD software of any grade (adult/
general/ children) can be played back.
Note:
Whilst playing a disc with parental lock, the display may
appear requesting a password in order to watch some
restricted scenes. In such case, enter the password to
temporarily change the parental level.
A language for audio can be set.
You can specify a language for
conversation and narration.
French
nk y
Tha
SUBTITLE
8 ADULT
CHARGEMENT
English
Setting
Only DVD software intended for children
can be played back.
2 G to 7 NC- Only DVD software intended for general
17
use and children can be played back.
French
LOADING
Indicator
1 KID SAFE
ou
■
ci
Mer
Password setting
From the setup menu, select “PASSWORD SETUP
PAGE”, “PASSWORD” and then “CHANGE”. A screen
appears.
A language for subtitle can be set.
The subtitles are displayed in a specified
language.
GENERAL
AUDIO
DOLBY
- - PREFERENCE PAGE - -
English
TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
French
PAL
ENG
ENG
ENG
PASSWORD
Thank you
VIDEO
PREFEREN.
AUDIO
GENERAL
DOLBY
VIDEO
PREFEREN.
- - PASSWORD SETUP PAGE - PASSWORD MODE
ON
PASSWORD
CHANGE
CHANGE PASSWORD
Merci
GENERAL
DISC MENU A language for disc menus can be set.
Menu screens are displayed in a specified
language.
AUDIO
DOLBY
VIDEO
PREFEREN.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
PASSWORD
English
French
CAST
ACTEURS
STAFF
PERSONNEL
1 Enter the old password using the Direct Search buttons.
(If this is the first time, enter “000000”).
2 Enter the new password using the Direct Search
buttons.
3 Enter the new password again for confirmation.
4 Press ENTER button again to confirm password
changed.
Note:
When you forget your password, follow below sequence.
At setup menu, select “PASSWORD SETUP PAGE”,
“PASSWORD” and then “CHANGE”.
1 Enter the old password as “000000” using the Direct
Search buttons.
2 Enter the new password.
3 Enter the new password again for confirmation.
E-13
11/8/24
08_XL-E171DVH_EN.fm
General control
■
X-Bass control
When the power is first turned on, the unit will enter the
extra bass mode which emphasises the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
■ Bass control
1 Press the BASS/TREBLE button to select “Bass”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass.
■
To turn the power on
- 5 ↔ - 4........↔ + 4 ↔ + 5
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power
stand-by mode.
■
■ Treble control
1 Press the BASS/TREBLE button to select “Treble”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
Display brightness control
adjust the treble.
To dim the display brightness, press the DEMO/DIMMER
button on the remote control.
Dimmer 1 (Display is dim).
Dimmer 2 (Display gets dimmer).
- 5 ↔ - 4........↔ + 4 ↔ + 5
Dimmer off (Display is bright).
■
■
Volume auto set in
If you turn off and on the main unit with the volume set to
17 or higher, the volume starts at volume 16.
■
DISC
Volume control
Turn the volume knob towards VOLUME +/– (on main unit)
or press VOLUME +/– (on remote control) to increase or
decrease the volume.
■
Auto power on function
When you press any of the following buttons, the unit turns
on.
● DVD, USB VIDEO/AUDIO, AUDIO/LINE (INPUT),
TUNER on the remote control: Selected function is
activated.
●
/ button on the main unit: The unit turns on and playback of the last function will start (DVD, TUNER, USB,
AUDIO IN, LINE IN)
■
Line In
Auto power off function
Muting
The volume is muted temporarily when pressing the
button on the remote control. Press again to restore the
volume.
E-14
11/8/24
08_XL-E171DVH_EN.fm
FM STEREO
Audio
In
FM MONO
USB
Video
USB
Audio
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
The main unit will enter the stand-by mode after 15
minutes of inactivity during:
AUDIO IN / LINE IN: No detection of input signal or very
low sound audibility.
DVD / USB AUDIO / USB VIDEO: In the stop mode.
■
Function
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
1
2
3
4
5
6
7
8
Setting the clock (Remote control only)
DVD playback
In this example, the clock is set for the 24-hour (00:00) display.
■
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the ENTER button. To adjust
1 Press the ON/STAND-BY button to turn the power on.
the day, press the
ENTER button.
or
2 When the input is not set to the disc
button and then press the
4 Press the
or
button to select 24-hour or 12hour display and then press the ENTER button.
The 24-hour display will appear.
(00:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
3
4
5
5 To adjust the hour, press the
or
button and then
press the ENTER button. Press the
or
button
once to advance the time by 1 hour. Hold it down to
advance continuously.
6 To adjust the minutes, press the
or
button and
then press the ENTER button. Press the
or
button once to advance the time by 1 minute.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in
again or after a power failure, reset the clock (page 37).
To readjust the clock:
Perform “Setting the clock” from step 1. If the “Clock” does
not appear in step 2, step 4 (for selecting the 24-hour or
12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 37 for details.]
2 Perform “Setting the clock” from step 1 onwards.
6
08_XL-E171DVH_EN.fm
mode, press the DVD button on
remote control to display the startup
screen.
The startup screen appears.
Press the OPEN/CLOSE on the main unit or remote
control to open the disc tray.
Place the disc on the disc tray, label side up.
Press the OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you
close the disc tray even if you do not press the /
( / ) button.
If playback does not start in step 5, press the /
( / ) button.
To interrupt playback:
Press the / ( / )button.
To resume playback from the same point, press the /
( / ) button.
To stop playback
DVD:
Press the button twice.
Audio CD/MP3/DivX:
Press the button.
JPEG:
Press the MENU/PBC button to stop JPEG viewing and
return to menu view.
When the unit is left unoperated for more than 5 minutes in
a stop mode, a screen saver appears (see page 9 when
the screen saver setting is “ON”)
Press any button on the main unit or remote control. The
startup screen returns.
Caution:
● Close the disc tray when not in use. Otherwise, dust
may accumulate inside and cause malfunction.
● The unit gets slightly warm when used for a long time.
It does not mean the unit is damaged.
● When attempting to play discs with scratches or of a
different region number, or unplayable or restricted (*1)
discs, an error message will appear on the TV display
and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the
audience age.
E-15
11/8/24
Playback
Basic operation
DVD playback (continued)
Notes:
● During disc initialisation, the volume cannot be
adjusted.
● Stop positions may be recorded on some discs. When
you play such a disc, playback stops there.
● During an operation, “ ” may appear indicating that
the operation is disabled by the disc.
■
To resume playback after stopping
(resume play)
■
You can resume playback from the point playback is
stopped.
1 Whilst a disc is playing, press the ( ) button.
The system stores the point you stopped.
2 To restart play, press the
/ ( / ) button.
Play resumes from the point you stopped.
To cancel the resume playback:
Press the ( ) button twice.
Notes:
● The resume playback feature is disabled on some
discs.
● Depending on the disc, playback may resume from
slightly before the stopped position.
■
DVD mode operation indicators
You can move to other tracks with simple operations.
When playing SVCD or VCD, cancel the P.B.C (playback
control) (see page 21).
Whilst a disc is playing, press the
or
button.
● Use the
button to skip to the next chapter (track).
● On DVD, SVCD, VCD and Audio CD, press the
button to skip to the beginning of the current track.
Press the
button again (twice) to skip to the
beginning of the previous chapter 1 track.
Notes:
● Some discs do not display the chapter (track) and the
skip feature is disabled.
● On a DVD, skip does not operate between titles.
■
The following are examples of operation indicators that
appear during DVD playback.
Operation
When the power
is on without a
disc.
Disc data is
being read.
TV screen
Unit display
To locate the beginning of a chapter (track)
(skip)
Fast forward/Fast backward (search)
You can search the desired point as you play the disc.
1 Whilst a disc is playing, press the
or
button.
Example: When the
button is pressed.
On DVD/DivX/SVCD/VCD/Audio CD/MP3 disc, the
speed changes as follows:
PLAY (Normal play)
2 X 4 X 8 X 16 X 32 X
NO DISC
LOADING
The disc is forwarded by the
the
button.
Stop
2 Press the
/
button and backward by
( / ) button to return to the normal
playback.
Play
To playback MP3 files through USB terminal
1 Whilst a MP3 track is playing via USB Audio, press and
Pause
hold
or
button on the remote control to fast
forward or fast reverse.
2 Release the
or
button to return to normal
playback.
Notes:
● On some discs, the search function is disabled.
● On a DVD, search does not operate between titles.
● Whilst searching on a DVD, the sound is not heard and
the subtitles do not appear.
● Whilst searching on SVCD or a VCD, the sound is not
heard.
● On SVCD, VCD, Audio CD and MP3, the search does
not operate between tracks.
● When search is performed during the DVD playback,
pictures may not be forwarded or reversed in the search
speed specified in this manual, depending on the disc
or the scene being played.
● The search does not operate on JPEG discs.
E-16
11/8/24
08_XL-E171DVH_EN.fm
1
2
3
4
5
6
7
8
Basic operation (continued)
■
In the playback mode
To play in the desired order
(programmed play)
1 Whilst in the playback mode, press the DIRECT button.
TV screen
You can playback the desired tracks with titles or chapters
in a specific order. Maximum of 20 tracks can be
programmed.
1 Whilst in the stop or playback mode, press the
MEMORY button.
TT:
CH:
06
TT:
CH:
1
–––
6
–––
02
TT:
CH:
07
TT:
CH:
2
–––
7
–––
03
TT:
CH:
08
TT:
CH:
3
–––
8
–––
TT:
CH:
4
–––
9
–––
TT:
CH:
Next
5
–––
10
–––
TT:
CH:
05
TT:
CH:
Exit
10
Search buttons.
CD TV screen
01
04
To select chapter 1: Press “0” and “1”.
To select chapter 12: Press “1” and “2”.
Playback starts after you complete enter the number(s).
EXIT
2 Enter title or chapter number or track number with the
Direct Search buttons.
● If you enter the wrong numbers, press
or
button to select the concerned track and then
reenter the new numbers.
3 Press
button to select “Start” and then press ENTER
button to start playback the programmed track(s).
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you
perform the following operations:
● Change to another function or remove the discs.
● Set to the stand-by mode.
■
or
button and press the ENTER button.
3 Enter the title or chapter number using the Direct
DVD TV screen
09
2 Select the title or chapter by pressing the
4 Press the DIRECT button to return to the actual size of
image (standard screen).
Notes:
● Direct play feature is disabled on some discs.
● Some discs may not display the chapter number.
● With DVDs, you can specify the desired point only in the
current title and not in another title.
To play by specifying time (time search):
You can playback from the desired point by specifying the
time.
1 Whilst in the playback mode, press the DIRECT button.
TV screen
To start playback from the desired point
(direct play)
2 Press
or
button to select “TT Time” then press the
ENTER button.
3 Specify the time with the Direct Search buttons.
To select and play the desired title and chapter:
In the stop mode
TT Time
1 Whilst in the stop mode, press the DIRECT button.
TV screen
TITLE 01/03 CHAPTER 10/19
2 Within 10 seconds, enter the title number first then only
can enter the chapter number by using the Direct
Search buttons. Press or button for title or chapter
selection.
Example:
To select title or chapter 1: Press “1”.
To select title or chapter 12: Press “10+” and “2”.
To select title or chapter 22: Press “10+” twice and “2”.
4 Press the DIRECT button to return to the actual size of
image (standard screen).
Notes:
● Some discs cannot play from the specified point.
● Time search feature is disabled on some discs.
E-17
11/8/24
08_XL-E171DVH_EN.fm
1 : 23 :40
● To specify 1 hour 23 minutes and 40 seconds, enter
“12340”.
● If you enter the wrong number, start over from step 1.
● Playback starts after you complete enter the
number(s).
Useful operation
On SVCD/VCD/DivX, only forward play is possible and the
speed changes as follows:
1/2
1/4
1/8
1/16
PLAY (Normal play)
2 Press the / button to return to the normal playback.
Note:
On some discs, the slow-motion play functions are
disabled.
■
To change the angle
You can change the angle of view when playing a DVD disc
that contains scenes recorded from multiple angles.
■
Still picture
When “ ” is displayed in the upper right corner of
the TV screen, press the ANGLE button repeatedly to
select the desired angle number.
You can freeze the picture during playback.
1 Whilst a disc is playing, press the
Notes:
● The angle number is not displayed if angles are not
recorded on the disc.
● Refer to the manual of the disc as the operation may
vary depending on the disc.
/ button.
2 The image or picture will freeze on TV screen.
“II” appears on the TV screen.
● The unit display counter will blink.
■
Note:
The sound is muted during still picture.
■
You can magnify images during playback.
Step function (Frame by frame advance
playback)
1 Whilst a disc is playing, press the ZOOM button.
Each press of the ZOOM button cycles through the
zoom setting as follows:
You can advance frame by frame.
2X
1 Whilst a disc is playing, press the STEP button.
/ button to return to the normal playback.
Notes:
● Frame playback operates forward only.
● Still picture and frame advance features are disabled
on some discs.
● The sound is muted during step function.
■
3X
4X
1/2
Each press the
and
ZOOM setting as follows:
Each press of the STEP button advances the frame.
2 Press the
To zoom images (zoom)
50%
75%
100%
1/3
1/4
OFF
buttons will switch the
125%
150%
200%
2 To shift the view and display the
desired part of a zoomed image,
press the ,
, or
button
repeatedly.
Slow-motion play
To return to normal view:
Press the ZOOM button repeatedly.
You can slow down the playback speed.
1 Whilst a disc is playing, press the SLOW button
repeatedly to select the desired speed.
On DVD, the speed changes as follows:
Notes:
● Images may become distorted when zoomed.
● Subtitles cannot be zoomed.
SLOW forward play
1/2
1/4
1/8
1/16
PLAY (Normal play)
1/16
1/8
1/4
1/2
SLOW reverse play
E-18
11/8/24
08_XL-E171DVH_EN.fm
1
2
3
4
5
6
7
8
Useful operation (continued)
■
2 Press the A - B button again to enter the end point (B).
To play repeatedly (repeat play)
TV screen
You can play a chapter (track) or a title repeatedly by
specifying it during playback.
1 Whilst a disc is playing, press the RANDOM/
AB
This starts A-B repeat play from the start point (A) to the
end point (B).
button.
TV screen
3 Press the A - B button to return to the normal playback.
CHAPTER
Each time the button is pressed, the repeat play mode
changes in the following order.
The repeat play mode changes as follows on DVD:
Repeat the currently playing chapter.
Notes:
● A-B repeat play is disabled on some discs.
● A-B repeat play for DVD is possible only within a title.
● Some scenes on DVD may not allow A-B repeat play.
● A-B repeat for SVCD/VCD is possible only within a
track.
Repeat the currently playing title.
■
Repeat the currently playing disc.
To select a title from the top menu of the
disc
The normal playback.
The repeat play mode changes as follows on SVCD/
VCD:
ONE
Repeat the currently playing track.
On a DVD with multiple titles, you can select a title from the
top menu.
1 Whilst in the stop or
playback mode, press the
TOP MENU button to
display the title menu.
Repeat the currently playing disc.
The normal playback.
When playing SVCD or VCD, cancel the P.B.C. (see
page 21)
Randomly play the track.
The normal playback.
MP3, DivX and JPEG are displayed when menu screen
is “ON” (see page 24).
2 To return to the normal playback, press the RANDOM/
button repeatedly until no display on TV screen.
Caution:
After performing repeat play, be sure to press the button.
Otherwise, the disc will play continuously.
Note:
On some discs, the repeat play function is disabled.
To play the contents between the specified
points repeatedly (A-B repeat)
You can play the desired portion repeatedly by specifying
it during playback.
■
To select a subtitle or audio language from
the disc menu
You can select the desired subtitle or audio language and
sound system on your DVD if it has a disc menu.
1 Whilst in the playback
Example
mode, press the RETURN
button to return to disc
menu.
Main Menu
1. Highlights
2. Start Movie
2 Press the
,
,
or button to change the setting
and press the ENTER button.
Or use the Direct Search buttons for some discs.
Note:
The procedure shown here provides only general steps.
The actual procedure for using the disc menu depends on
the disc. See the disc jacket for details.
TV screen
A
This registers the start point (A).
E-19
08_XL-E171DVH_EN.fm
4 Comedy
Note:
The procedure shown here provides only general steps.
The actual procedure for using the title menu depends on
the disc. See the disc jacket for details.
Repeat the currently playing disc.
11/8/24
2 Action
3 SF
, , or button to select a title, and then
press the ENTER button.
● The selected title plays.
● Or use the Direct Search buttons for some discs.
Repeat the currently playing track.
1 Whilst a disc is playing, press the A - B button.
1 Drama
2 Use the
The repeat play mode changes as follows on audio CD:
■
Example
Various settings
The subtitle language, audio language and TV type you
select during playback are reset each time you set this unit
to the stand-by mode or switch the input. To keep your own
settings, set them in the Setup menu (see page 9).
DVD:
TITLE ELAPSED
TT:01/03
0:15:01
CH:01/29
Elapsed playback time for current title
TITLE REMAIN
TT:01/03
1:26:54
CH:01/29
Remaining playback time for current title
CHAPTER ELAPSED
■
TT:01/03
0:15:01
To change the subtitle language
TT:01/03
0:20:10
SUBTITLE 01/03 ENGLISH
CH:01/29
Remaining playback time for
current chapter
DISPLAY OFF
SVCD/VCD/CD:
SINGLE ELAPSED
Notes:
● On some discs, the subtitle language cannot be
changed.
● If no subtitles are recorded on the disc, “ ” is
displayed.
● It may take time to switch the subtitle language to the
selected one.
● Subtitles cannot be hidden on some DVDs.
■
Elapsed playback time for current chapter
CHAPTER REMAIN
You can change the subtitle language or hide subtitles during
playback.
Whilst a disc is playing, press
the SUBTITLE/DIGEST/
DISPLAY button repeatedly to
select the desired subtitle
language.
CH:01/29
TRACK:01/30
00:54
Total track number
Current track number
Elapsed playback time for the current track
SINGLE REMAIN
TRACK:01/30
00:40
To change the audio channel
Remaining playback time for the
current track
TOTAL ELAPSED
TRACK:01/30
00:54
You can select an audio channel.
Whilst a disc is playing, press the AUDIO button repeatedly
to select the desired audio channel.
E.g.: The audio channel changes as follows on DVD:
TOTAL REMAIN
TRACK:01/30
50:50
Audio 1/2: AC3 5 CH English
Audio 2/2: AC3 2 CH English
AUDIO 2
AUDIO 3
When P.B.C. is set to ON for SVCD or VCD, total
elapsed playback time and total remaining time will not
appear.
AUDIO 4
The audio channel changes as follows on VCD:
MONO
LEFT
MONO
RIGHT
MIXMONO
DivX:
STEREO
SINGLE ELAPSED
0:01:06
Note:
The audio channel may not be changed on some discs.
■
Elapsed playback time for the current track
To change the display on TV screen
You can display or hide the operation indicators on the TV
screen.
Whilst a disc is playing, press the OSD button. (The
display is changed at each press.)
Current title number
Total number of titles
TT:01/03
0:17:17
CH:01/29
Total number of chapters
Current chapter number
Playback time
E-20
11/8/24
08_XL-E171DVH_EN.fm
Total remain playback time for
the disc
DISPLAY OFF
The audio channel changes as follows on SVCD:
AUDIO 1
Total elapsed playback time
for the disc
SINGLE REMAIN
0:20:05
Remaining playback time for the current track
DISPLAY OFF
1
2
3
4
5
6
7
8
Video CD and Super Video CD playback
The following playback functions are the same as DVD
or CD operations.
Page
To locate the beginning of a chapter (track)
(skip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fast forward/Fast backward (search) . . . . . . . . . . . . 16
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
To zoom images (zoom) . . . . . . . . . . . . . . . . . . . . . . . 18
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . 19
To play the contents between the specified point
repeatedly (A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . 19
To change the audio channel . . . . . . . . . . . . . . . . . . 20
■
To play without activating the playback
control function
You can play a video CD (super video CD) with P.B.C.
without activating the playback control function.
In this case, the menu screen will not appear, and the disc
will play in the same way as a video CD (super video CD)
without P.B.C.
Whilst in the stop or playback mode,
press the MENU/PBC button to
cancel the P.B.C. mode.
● TV screen will show “PBC OFF”
then playback will start.
Note:
Some video CDs (super video CDs) with P.B.C. cannot be
played back when the P.B.C. mode is off.
■
■
To start playback from the desired point
(direct play)
To play by specifying time (time search):
Cancel the P.B.C. (playback control).
Playback of a video CD (super video CD)
with P.B.C. ON
1 During stop, press the DIRECT button.
This unit handles video CDs that support P.B.C. (version
2.0). P.B.C. is an abbreviation of “Playback control”. These
discs have a menu that is displayed on the TV screen. You
can play interactive games and make use of other software
with the retrieval function (menu playback).
1 Press the MENU/PBC button with PBC ON.
The menu will appear on the
TV and playback will be
paused.
Example
1
2
Search buttons.
● Playback starts.
● After playback stops, the menu will reappear. Select
the menu number to play.
/
To stop playback:
Press the button twice.
To stop the current operation and return to the menu:
Press the RETURN button.
The P.B.C. function will not work in the following
conditions.
Repeat/programmed/direct play or the skip feature is in
operation.
Note:
The menu screen cannot be scrolled on some discs.
2 Specify the time with the Direct Search buttons.
● Enter minutes and seconds.
● To specify 1 hour 23 minutes and 40 seconds, enter
“8340”.
● If you enter the wrong number, start over from step 1.
● Playback starts (automatically) after you complete
enter the number(s).
In the playback mode:
2 Select the desired menu number using the Direct
To interrupt playback:
Press the / button.
To resume playback from the same point, press the
button.
DISC GO TO: - -:--
1 Whilst in the playback mode, press the DIRECT button.
2 Press or button to select “Track Time” then press
the ENTER button.
3 Specify the time with the Direct Search buttons.
● To specify 1 hour 23 minutes and 40 seconds, enter
“12340”.
● If you enter the wrong number, start over from step 1.
● Playback starts (automatically) after you complete
enter the number(s).
4 Press the DIRECT button to return to the actual size of
image (standard screen).
Notes:
● Some discs cannot play from the specified point.
● Time search feature is disabled on some discs.
● Time search feature is not available on MP3 and JPEG
discs.
E-21
11/8/24
08_XL-E171DVH_EN.fm
Video CD and Super Video CD playback (continued)
■
■
Disc digest selection
Track digest selection
You can look at the sections and select the scene you want
to start watching from. This function is convenient when
you want to start from the middle of an undivided track, for
example, a movie.
1 During playback, press the SUBTITLE/DIGEST/
DISPLAY button.
2 Select “Track Interval” by using cursor
and then press ENTER button.
button
or
● The current track will be divided into 10 minutes
interval.
The track being played will be divided into 6 sections
and playback will be paused.
TV screen
You can playback a desired track by selecting one from the
6 displayed tracks on the screen.
Select Digest Type
1
2
3
4
5
6
1 During stop mode, press the SUBTITLE/DIGEST/
DISPLAY button.
button and
2 Select digest type by using cursor
or
then press ENTER button:
● Track digest (disc will be divided by tracks)
● Disc Interval (disc will be divided into 10 minutes
interval)
● Up to 6 tracks will be displayed on the screen.
TV screen
Select Digest Type
1
2
3
4
5
6
3 Press the Direct Search buttons on the remote control
to select the scene you want to watch.
Playback will start from the selected scene after
pressing the / button.
To cancel the track digest operation:
Select EXIT and press ENTER button.
Notes:
● The track digest function works only during playback.
● One track is divided into six frames of equal playing
time.
3 Press the Direct Search buttons on the remote control
to select the desired track.
Playback will be started from the selected track after
pressing the / button.
When there are more than 6 tracks on the video CD:
Each press of the
button will display the next 6 tracks.
Press the
button to return to the previous display.
To cancel the disc digest:
Select EXIT and press ENTER button.
E-22
11/8/24
08_XL-E171DVH_EN.fm
1
2
3
4
5
6
7
8
CD operation
This system can play back a standard CD, CD-R/RW in the
CD format, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable
due to the state of the disc or the device that was used for
recording.
The following playback functions are the same as DVD
operations.
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To locate the beginning of a chapter (track) (skip) . . . . . 16
Fast forward/Fast backward (search) . . . . . . . . . . . . 16
To play in the desired order (programmed play) . . . 17
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . 19
To play the contents between the specified points
repeatedly (A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . 19
To change the display on TV screen . . . . . . . . . . . . 20
DivX/MP3/WMA (disc) operation and
JPEG (disc/USB video) operation
MP3:
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by
significant compression from the original audio
source with very little loss in sound quality.
● This system supports MPEG 1 Layer 3 and VBR files.
● During VBR file playback, time counter in the display
may differ from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that
include audio files which are compressed with
Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media
Player.
● Bitrate which is supported by WMA is 64 ~ 160 kbps.
The following playback functions are the same as DVD
or VCD operations.
Page
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To locate the beginning of a chapter (track) (skip) . . . . 16
Fast forward/Fast backward (search) . . . . . . . . . . . . 16
To zoom images (zoom). . . . . . . . . . . . . . . . . . . . . . . 18
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . 19
To change the display on TV screen . . . . . . . . . . . . 20
■
■
To start playback from the desired point
(direct play)
To play by specifying time (time search):
1 During playback, press the DIRECT button twice
To select and play the desired track:
Whilst in the stop or playback mode, press the Direct
Search buttons to select the track number.
To select track 14: Press “10+” and “4”.
TV screen
TV screen
GO TO _: __:__
2 Specify the time with the Direct Search buttons.
● Enter minutes and seconds.
● To specify 1 hour 23 minutes and 40 seconds, enter
“12340”.
● If you enter the wrong number, start over from step 1.
● You can check the total playback time of the track by
refer to the page 20.
Unit display
SELECT TRACK: 14/30
To play by specifying time (time search):
1 During stop or playback mode, press the DIRECT
button once and “DISC GO TO” appear on TV screen.
TV screen
To select and play the desired track:
1 Whilst in the stop or playback mode, press the Direct
Search buttons or press DIRECT button and then enter
the desired track number(s).
TV screen
DISC GO TO: - -:--
2 Specify the time with the Direct Search buttons.
● Enter minutes and seconds.
● To specify 1 hour 23 minutes and 40 seconds, enter
“8340”.
● If you enter the wrong number, start over from step
1.
Notes:
● Direct play feature is disabled on some discs.
● Some disc cannot play from the specified point.
● Time search feature is disabled on some discs.
---/150
Total of tracks
If the desired track is 25, press “0”, “2” and “5”.
2 Playback will start automatically on selected track.
Notes:
● Direct play feature is disabled on some discs.
● Some discs cannot play from the specified point.
E-23
11/8/24
To start playback from the desired point
(direct play)
08_XL-E171DVH_EN.fm
DivX/MP3/WMA (disc) operation and JPEG (disc/USB video) operation (continued)
■
Playback on the menu screen
You can play CD-R/RW recorded in the MP3/WMA and
JPEG formats.
1 Load a disc containing MP3/WMA, JPEG and DivX files,
the menu screen appears.
... Indicates folders.
Repeat play on the JPEG menu screen:
Condition A
You can play all images in the disc. Playback will stop after
complete playback all the images in the disc.
To perform repeat play, press the RANDOM ( ) button
whilst in the stop mode. Each time the button is pressed,
the play mode changes in the following order:
TV screen
No repeat the currently playing track (image).
Repeat the currently playing track (image).
... Indicates MP3 data.
Repeat play all the tracks (images) in the
disc
... Indicates JPEG data.
... Indicates DivX data.
Randomly repeat play the tracks (images).
... Indicates WMA.
Repeat play is cancelled.
2 Press the
or
button to select a track and press the
ENTER or / button.
● Playback starts when you select a track.
● When the format is JPEG, the next file is
automatically displayed after a whilst. Playback
starts when you select a track.
● You can use the or
button to rotate the JPEG
picture (see page 25).
● Using the Direct Search buttons, you can open files
or folders directly. Enter the number on the right of
the display.
Caution:
If you convert MP3 data to “audio CD” data to record on a
CD-R/RW, play it as an audio CD. The MP3 operation
cannot be performed.
Condition B
You can play images after select each folder inside the
disc. Whilst in the main menu screen, press the MEMORY
button. All the folders will be viewed on the TV screen
(folder on). The playback will stop after complete playback
all the images in the currently playing folder.
To perform repeat play, press the RANDOM ( ) button
whilst in the stop mode. Each time the button is pressed,
the play mode changes in the following order:
TV screen
No repeat the currently playing track
(images)
Repeat the currently playing track (image)
Notes:
● Up to 20 characters can be displayed for a folder name
and a track name. Underlines, asterisks, and spaces
may not be displayed.
● This function is only visible when unit is connected to
TV.
■
To play repeatedly (repeat play)
Repeat play on the DivX menu screen:
Whilst a disc is playing, press the RANDOM ( ) button.
Each time the button is pressed, the repeat play mode
changes in the following order.
Repeat play all the tracks (images) in
the currently playing folder.
Randomly repeat play the tracks
(images).
Repeat play is cancelled.
Notes:
● To view back the file list, press the MEMORY button
whilst in the main menu screen.
● To return to the main menu screen whilst playback,
press the MENU/PBC button.
TV screen
No repeat the currently playing track.
Repeat the currently playing track.
Repeat all the tracks.
Randomly repeat play the tracks.
Repeat play is cancelled.
E-24
11/8/24
08_XL-E171DVH_EN.fm
1
2
3
4
5
6
7
8
DivX/MP3/WMA (disc) operation and JPEG (disc/USB video) operation (continued)
Repeat play on the MP3/WMA menu screen:
Condition A
You can play all songs in the disc. Playback will stop after
complete playback all the songs in the disc.
To perform repeat play, press the RANDOM ( ) button
whilst in the stop mode. Each time the button is pressed,
the play mode changes in the following order:
TV screen
No repeat the currently playing track
(song)
Repeat the currently playing track (song).
Repeat play all the tracks (songs) in the
disc
Randomly repeat play the tracks (songs).
Repeat play is cancelled.
Condition B
You can play songs after select each folder inside the disc.
Whilst in the main menu screen, press the MEMORY
button. All the folders will be viewed on the TV screen
(folder on). The playback will stop after complete playback
all the songs in the currently playing folder.
To perform repeat play, press the RANDOM ( ) button
whilst in the stop mode. Each time the button is pressed,
the play mode changes in the following order:
TV screen
No repeat the currently playing track
(song)
Repeat the currently playing track (song)
Repeat play all the tracks (songs) in
the currently playing folder
Randomly repeat play the tracks
(songs)
Repeat play is cancelled.
Note:
To view back the file list, press the MEMORY button whilst
in the main menu screen.
Caution:
After performing repeat or random, be sure to press the
button. Otherwise, it will play continuously.
■
Rotating a picture
You can rotate images.
During playback, press the
or
button.
The image rotates as shown below.
button : 90° rotation in a clockwise direction.
■
You can enjoy to see images of JPEG files whilst listening
to the musics of MP3 at the same time.
1
2
3
4
5
■
Random play (REMOTE CONTROL ONLY)
The tracks/images on the disc(s) can be played in random
order automatically.
To random play all tracks/images:
During stop mode, press the RANDOM ( ) button to
select “RANDOM” then press / button to play.
To cancel random playback, press the RANDOM ( )
button repeatedly until “REPEAT OFF” / “FOLDER”
appear.
Notes:
● Playback will stop after all the tracks is played
randomly.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
● During random play, repeat function is not possible.
Note:
) When in folder mode, the selected playmode can be
used for the files in the selected folder only.
(
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz).
● “MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3”
and MP1, MP2 format are not supported.
● Playback order for MP3 files may differ sometimes
depending on the writing software used during file
downloading.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● Copyright protected WMA files cannot be played back.
E-25
08_XL-E171DVH_EN.fm
Playback the desired songs.
Press MENU/PBC button to return to the main menu.
Select JPEG folder using
or
button.
Select the images or pictures those you want to view.
Press the ENTER button.
Notes:
● Whilst playing the images, you can not select the
MP3/WMA folder or files.
● JPEG maximum resolution is 10Mbytes of file size.
button : 90° rotation in an anti-clockwise direction.
11/8/24
Simultaneously playback the MP3 and
JPEG
MP3/WMA folder mode (disc)
operation
MP3/WMA playback (USB Audio
Function)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files.
You can then play back these downloaded music files by
burning them to a CD-R/RW disc.
● Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
■
About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
These folder can be selected by the
or
button on the
remote control. If there is not supported file formats inside
the selected folder, the folder is skipped and the next folder
will be selected.
USB
VIDEO/AUDIO
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
1 ROOT folder is set as folder 1.
2 As for folders inside ROOT folder (Folder A and Folder
B), the folder which is recorded earlier on the disc will
be set as folder 2 and folder 3.
3 As for folder inside Folder A (Folder C and Folder D),
the folder which is recorded earlier on the disc will be
set as folder 4 and folder 5.
4 Folder E that is inside Folder D will be set as folder 6.
● The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
● For CD MP3/WMA, 255 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER B
(FOLDER 3)
FOLDER C
(FOLDER 4)
FILE 3
FILE 4
FILE 5
FOLDER D
(FOLDER 5)
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)
■
1 Press the USB VIDEO/AUDIO button on the remote
control or FUNCTION button repeatedly on main unit to
select USB Audio function. Connect the USB memory
device that has MP3/WMA format files on the unit.
When the USB memory is connected to the main unit,
the device information will be displayed.
2 Press the MEMORY button to view FOLDER mode and
press the
or
button to select desired playback
folder. To start playback with folder mode on, go to step
4. To change the playback folder, press the
or
button to select another folder.
FILE 1
FILE 2
/ or ENTER button and playback will start.
08_XL-E171DVH_EN.fm
TOTAL indicator
FILE 9
FILE 10
Total number of folder
Total number of files
FOLDER
indicator
FOLDER number
First track number
in the folder
3 Select desired file to be played back by pressing the
or
button.
E-26
11/8/24
To playback USB/MP3 player with folder
mode on
MP3 indicator
WMA indicator
5 Press the
or
button on the remote control to
select the desired playback folder and track.
● To start playback with folder mode, press the
MEMORY button to view Folder mode.
● To change the playback folder, press the
key to
go root folder then select another folder. You can
also do this by going to the “..” folder at the top, then
press ENTER.
6 Press the
Notes:
● This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
● Some external storage devices may not operate with
this system.
● Operation of external storage devices (USB memory
devices, external hard disks, etc.) is nor guaranteed.
1
2
3
4
5
6
7
8
MP3/WMA playback (USB Audio Function) (continued)
/ (CD/USB
/ ) button. Playback will
4 Press the
start and file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded on the disc.
● In case of playback with the folder mode on, press
the PRESET ( or ) button, and the folder can be
selected even though it is in playback/pause mode.
It will continue playback/pause mode in the 1st track
of the selected folder.
● Display content can be changed by pressing the
SUBTITLE/DIGEST/DISPLAY button.
File name display
Counter display
Album display
Folder display
Title display
Artist display
Various functions
Function
Note:
If “Not Supported” is displayed, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
■
■
To playback USB/MP3 player with folder
mode off
1 Press the USB VIDEO/AUDIO button on the remote
control or FUNCTION button repeatedly on main unit to
select USB Audio function. Connect the USB memory
device that has MP3/WMA format files on the unit.
When the USB memory is connected to the main unit,
the device information will be displayed.
Main
unit
Remote
control
Play
Press in the stop mode.
Stop
Press in the playback
mode.
Pause
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
Track
up/ down
Fast
forward/
reverse
2 Select desired file to be played back by pressing the
or
button.
3 Press the
/ (CD/USB
/ ) button. Playback will
start and the file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
SUBTITLE/DIGEST/DISPLAY button.
Operation
■
Direct track search
By using the Direct Search, the desired tracks on the
current disc can be played.
Use the Direct Search on the remote control to select
the desired track whilst playing the selected disc.
● The Direct Search buttons allow you to select up to
number 9.
● When selecting number 10 or higher, use the “10+”
button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
Selected track number
B. For example, to choose 130
1
2
3
4
Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.
Notes:
● A track number higher than the number of tracks on the
disc cannot be selected.
● During random play, direct search is not possible.
E-27
11/8/24
08_XL-E171DVH_EN.fm
MP3/WMA playback (USB Audio Function) (continued)
■
■
Repeat play
Programmed play (MP3/WMA)
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the RANDOM
button repeatedly until “Repeat One”
appears. Press the / (CD/USB / ) button.
To repeat all tracks:
Press the RANDOM
button repeatedly until “Repeat All”
appears. Press the / (CD/USB / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on page 28
and then press the RANDOM
button repeatedly until
“Repeat All” appears.
To cancel repeat play:
Press the RANDOM
button repeatedly until “Normal”
appears and “
” disappears.
1 Whilst in the stop mode, press and hold the MEMORY
Caution:
● After performing repeat play, be sure to press the
(CD/USB ) button. Otherwise, the disc will play
continuously.
3 Press the MEMORY button to save the folder and track
■
2 Press cursor
or
button on the remote control to
select the desired folder.
Then press the
or
button on the remote control
to select the desired tracks.
number.
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold the RANDOM
button on the remote control
until “Random” appears. Press the / button.
To cancel random play:
Press and hold the RANDOM
disappear.
button to enter the programming save mode.
button until “RDM” indicator
Notes:
● If you press the
button during random play, you can
move to the track selected next by the random operation.
On the other hand, the button does not allow you to move
to the previous track. The beginning of the track being
played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
5 Press the
To cancel the programmed play mode:
During programmed stop mode, press the
button. The
display will show “Memory Clear” and all the programmed
contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press and hold MEMORY
button, and then press MEMORY button repeatedly to go
to the last programme memory. Then follow steps 2 - 3 to
add tracks. The new tracks will be stored after the last track
of the previous programme.
Note:
During the programme operation, random play is not
possible.
E-28
11/8/24
08_XL-E171DVH_EN.fm
/ button to start playback.
1
2
3
4
5
6
7
8
MP3/WMA playback (USB Audio Function) (continued)
■
To remove USB memory device
1 Press the
button.
2 Disconnect USB memory device from the USB terminal.
Notes:
● SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory's format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● This unit only supports "MPEG-1 Audio Layer-3"
format. (Sampling Frequency is 32 kHz, 44.1 kHz, 48
kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32 kbps to 320
kbps, WMA is 64 kbps to 160 kbps.
● For MP3/WMA files, please put ".MP3" ".WMA"
extension. Files cannot be played back if there is no
MP3/WMA extension.
● Playlist are not supported on this unit.
● This unit can display Folder Name or File Name up to
32 characters.
● Maximum total number of MP3/WMA files is 1024.
● Maximum total number of folders is 255 inclusive of
root directory.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the SUBTITLE/
DIGEST/DISPLAY button during file playback or pause
mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
E-29
11/8/24
08_XL-E171DVH_EN.fm
Listening to the radio
■
Memorising a station
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in “Tuning”.
2 Press the MEMORY button.
3 Within 30 seconds, press the PRESET (
or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
4 Within 30 seconds, press the MEMORY button to store
that station in memory. If the “MEMORY” and preset
number indicators disappear before the station is
memorised, repeat the operation from step 2.
■
5 Repeat steps 1 - 4 to set other stations, or to change a
Tuning
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER button repeatedly to select FM Stereo
or FM Mono.
3 Press the TUNING (
or
) button on the remote
control to tune in to the desired station.
● Manual tuning:
or
) button repeatedly to
Press the TUNING (
tune in to the desired station.
● Auto tuning:
or
) button is pressed for
When the TUNING (
more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the first
receivable broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
or
)
● To stop the auto tuning, press the TUNING (
button again.
● When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light up. Finally, the station name will
appear.
● Full auto tuning can be achieved for RDS stations
“ASPM”, see page 31.
To receive an FM stereo transmission:
● Press the TUNER button to select stereo mode and
“ST” indicator will be displayed. “
” and “ ” will
appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
■
or
) button for less than 0.5
seconds to select the desired station.
■
08_XL-E171DVH_EN.fm
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1 Press the PRESET (
or
) button for more than 0.5
seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for 5
seconds each.
2 Press the PRESET (
or
desired station is located.
■
) button again when the
To erase entire preset memory
1 Press the TUNER button on remote control or press the
FUNCTION button on main unit repeatedly to select
Tuner function.
2 In Tuner function, press the CLEAR button until “Tuner
E-30
11/8/24
To recall a memorised station
1 Press the PRESET (
Clear” appears.
1
2
3
4
5
6
7
8
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“TP” (Traffic Programme) will appear on the display when
the received broadcast carries traffic information, and “TA”
(Traffic Announcement) will appear whilst a traffic
information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received.
■
Using the Auto Station Programme
Memory (ASPM)
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 Press and hold down the RDS ASPM button on the
remote control.
1 After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
2 When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
You can control the RDS by using the buttons on the
remote control only.
■
Information provided by RDS
3 After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept
there.
Station name (PS)
Frequency
Notes:
● If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
● Any station which has the same frequency as the one
stored in memory will not be stored.
● If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
● If no station have been stored in memory, “END” will
appear for about 4 seconds.
● If the RDS signals are very weak, station names may
not be stored in memory.
● The same station name can be stored in different
channels.
● In a certain area or during certain time periods, the
station names may temporarily be different.
Programme type (PTY)
Radio text (RT)
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
No PS
No PTY
FM 98.80 MHz
No RT
E-31
11/8/24
08_XL-E171DVH_EN.fm
Using the Radio Data System (RDS) (continued)
■
Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
● “PS”, “No PS” and a station name appear alternately,
and the unit does not operate properly.
● If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
● When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
● “No PS”, “No PTY” or “No RT” will flash for about 5
seconds, and then the frequency will be displayed.
Notes for radio text:
● The first 14 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
● If you tune in to an RDS station which is not
broadcasting any radio text, “No RT” will be displayed
when you switch to the radio text position.
● Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
■
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about 8
seconds, and then the station name will remain it.
● If you want to listen to the same programme type of
another station, press the RDS PTY button whilst the
channel number or station name is flashing. The unit
will look for the next station.
● If no station can be found, “NOT FOUND” will appear
for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, “TP” will
appear.
(This does not mean that you can listen to the traffic
information at that time.)
When the traffic information is broadcast, “TA” will appear.
Descriptions of the PTY (Programme Type) codes, TP
(Traffic Programme) and TA (Traffic Announcement)
You can search for and receive the following PTY, TP and
TA signals.
NEWS
To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme type
(news, sports, traffic programme, etc. ... see page 32 - 33)
from the stations in memory.
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 Press the RDS PTY button on the remote control.
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
“SELECT” and “PTY TI” will appear alternately for
about 6 seconds.
3 Within 6 seconds, press the
or
button to select
the programme type.
Each time the button is pressed, the programme type
will appear.
4 Whilst the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
SCIENCE
VARIED
POP M
ROCK M
EASY M
After the selected programme type has been lit for 2
seconds, “SEARCH” will appear, and the search
operation will start.
LIGHT M
CLASSICS
E-32
11/8/24
08_XL-E171DVH_EN.fm
Short accounts of facts, events and
publicly expressed views, reportage and
actuality.
Topical programme expanding or
enlarging upon the news, generally in
different presentation style or concept,
including debate, or analysis.
Programmes whose purpose is to impart
advice in the widest sense.
Programme concerned with any aspect
of sport.
Programme intended primarily to
educate, of which the formal element is
fundamental.
All radio plays and serials.
Programmes concerned with any aspect
of national or regional culture, including
language, theatre, etc.
Programmes about the natural sciences
and technology.
Used for mainly speech-based
programmes usually of lightentertainment nature, not covered by
other categories. Examples include:
quizzes, panel games, personality
interviews.
Commercial music, which would
generally be considered to be of current
popular appeal, often featuring in current
or recent record sales charts.
Contemporary modern music, usually
written and performed by young
musicians.
Current contemporary music considered
to be “easy-listening”, as opposed to
Pop, Rock or Classical, or one of the
specialised music styles, Jazz, Folk or
Country. Music in this category is often
but not always, vocal, and usually of
short duration.
Classical music for general, rather than
specialist appreciation. Examples of
music in this category are instrumental
music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and
including Grand Opera.
1
2
3
4
5
6
7
8
Timer and sleep operation (Remote
control only)
Using the Radio Data System (RDS)
(continued)
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM
TP
TA
Musical styles not fitting into any of the
other categories. Particularly used for
specialist music of which Rhythm &
Blues and Reggae are examples.
Weather reports and forecasts and
meteorological information.
Stock Market reports, commerce,
trading, etc.
For programmes targeted at a young
audience, primarily for entertainment
and interest, rather than where the
objective is to educate.
Programmes about people and things
that influence them individually or in
groups. Includes: sociology, history,
geography, psychology and society.
Any aspect of beliefs and faiths, involving
a God or Gods, the nature of existence
and ethics.
Involving members of the public
expressing their views either by phone or
at a public forum.
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas and
opportunities. Not for use for
announcements about problems, delays,
or roadworks affecting immediate travel
where TP/TA should be used.
Programmes concerned with
recreational activities in which the
listener might participate. Examples
include, Gardening, Fishing, Antique
collecting, Cooking, Food & Wine, etc.
Polyphonic, syncopated music
characterised by improvisation.
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
Current Popular Music of the Nation or
Region in that country's language, as
opposed to International “Pop” which is
usually US or UK inspired and in English.
Music from the so-called “golden age” of
popular music.
Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
Programme concerned with factual
matters, presented in an investigative
style.
Broadcast when testing emergency
broadcast equipment or receivers.
Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
Broadcasts which carry traffic
announcements.
Traffic announcements are being
broadcast.
Timer playback:
The unit turns on and plays the desired source (DVD,
TUNER, USB AUDIO, USB VIDEO, AUDIO IN, LINE IN) at
a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“ ” indicator).
Daily timer:
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
(“DAILY” indicator).
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
1 Set the daily timer (page 34).
2 Set the once timer (page 34).
E-33
11/8/24
08_XL-E171DVH_EN.fm
1 minute or more
Once timer
Daily timer
Start
Stop
Start
Stop
Timer and sleep operation (Remote control only) (continued)
■
Timer playback
13 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel
the daily timer when it is not in use.
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 15). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs to be
played.
1 Press the ON/STAND-BY button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to
select “Once” or “Daily”, and press the ENTER button.
4 Within 10 seconds, press the
or
button to
select “Timer Set”, and press the ENTER button.
5 To select the timer playback source (DISC, TUNER,
USB VIDEO/AUDIO, AUDIO IN, LINE IN), press the
or
button. Press the ENTER button.
When you select the tuner, select a station by pressing
the
or
button, and then press the ENTER
button. If a station has not been programmed, “No
Preset” will be displayed and timer setting will be
cancelled.
6 To adjust the day, press the
or
button and then
press the ENTER button.
7 Press the ENTER button to adjust the hour. Press the
or
button and then press the ENTER button.
8 To adjust the minutes, press the
or
button and
then press the ENTER button.
Notes:
● When performing timer playback using external unit
connected to the USB terminal or AUDIO IN jack or
“LINE IN” connector, select related source in step 5.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
Checking the timer setting:
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to select
“Timer Call”, and press the ENTER button.
Cancelling the timer setting:
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to select
“Timer Off”, and press the ENTER button. Timer will be
cancelled (the setting will not be cancelled).
9 Set the time to finish as in steps 7 and 8 above.
10 Adjust the volume using the VOLUME control, and then
press the ENTER button. Do not turn the volume up too
high.
11 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the
or
button to select
“Timer On” , and press the ENTER button.
4 Press the ON/STAND-BY button to enter the power
12 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer icon will blink during timer
playback.
E-34
11/8/24
08_XL-E171DVH_EN.fm
stand-by mode.
1
2
3
4
5
6
7
8
Enhancing your system
Timer and sleep operation (Remote
control only) (continued)
■
The connection lead is not included. Purchase a
commercially available lead as shown below.
Sleep operation
The tuner, DISC, USB, Audio In and Line In can all be
turned off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the Direct Search button to set
the time. (1 minute ~ 99 minutes)
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
Portable audio
player, etc.
automatically after the preset time has elapsed.
To confirm the remaining sleep time:
1 Whilst “SLEEP” is indicated, press the SLEEP button.
Audio cable (not supplied)
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
■
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 34).
Timer playback
setting
Sleep timer
setting
1-99 minutes
Sleep operation will
automatically stop
End time
Desired time
Timer playback
start time
■
1 Use a connection lead to connect the portable audio
player etc. to the AUDIO IN socket. When using video
equipment, connect the audio output to this unit and the
video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO/LINE (INPUT) button on the remote
control or FUNCTION button repeatedly on main unit to
select AUDIO IN function.
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase the
volume of the connected device.
Note:
To prevent noise interference, place the unit away from the
television.
■
08_XL-E171DVH_EN.fm
Headphones
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphone,
reduce the volume.
● Be sure your headphone has a 3.5 mm (1/8") diameter
plug and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
● Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
E-35
11/8/24
Listening to the playback sounds of
portable audio player, etc.
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service
centre.
■
General
Symptom
● Did a power failure occur?
Reset the clock. (Refer
page 15)
● When a button is
pressed, the unit
does not respond.
● Set the unit to the power
stand-by mode and then
turn it back on.
● If the unit still malfunctions,
reset it. (Refer page 37)
● No sound is heard.
● Is the volume level set to
“Min”?
● Are the headphones
connected?
● Are the speaker wires
disconnected?
● Is the disc loaded upside
down?
● Does the disc satisfy the
standards?
● Is the disc distorted or
scratched?
● Playback sounds are
skipped, or stopped
in the middle of a
track.
● Is the unit located near
excessive vibrations?
● Is the disc very dirty?
● Has condensation formed
inside the unit?
● Wrong time
display.
● Wrong file name
display.
Symptom
The VIDEO OUT setting may
be wrong.
● Use the provided video
cable and check the
VIDEO OUT setting in
Setup menu. (refer page
11)
● Press and hold VIDEO
MODE button to change
the Video Out setting.
● No picture from
HDMI output
The Resolution setting may be
wrong.
● Use the provided video
cable and check the
RESOLUTION setting in
Setup menu. (refer page
11)
● Press and hold ANGLE
button to reset the
resolution to default
setting.
● TV output is
distorted
The TV type may be wrong
● Use the provided video
cable and check the TV
TYPE setting in Setup
menu. (refer page 11)
● Press and hold ZOOM
button on the remote
control to change TV Mode
setting.
■
Tuner
Symptom
● The radio makes
unusual noises
continuously.
Possible cause
● Is the unit placed near the
TV or computer?
● Is the FM aerial placed
properly? Move the aerial
away from the AC power
lead if it is located nearby.
08_XL-E171DVH_EN.fm
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
E-36
11/8/24
Possible cause
● No picture from S
VIDEO or
Component output
Possible cause
● Is the AC power lead of the
unit plugged in?
● Is the battery polarity
correct?
● Are the batteries dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong
light?
Possible cause
● Is there any MP3/WMA file
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain AAC
file only?
● Is it a copyright protected
WMA file?
● Is it a false MP3 file?
● Is Variable Bitrate file being
played back?
● Is the File Name written in
Chinese or Japanese
characters?
TV Output
Remote control
● The remote control
does not operate.
■
● Playback does
not start.
Symptom
Possible cause
● Playback does not
start.
● Playback stops in
the middle or is not
performed properly.
■
Symptom
● Device cannot
be detected.
■
DVD/CD player
Symptom
USB
Possible cause
● The clock is not set
to the correct time.
■
■
1
2
3
4
5
6
7
8
Troubleshooting chart (continued)
■
■
If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
■
Care of compact discs
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the centre, along the
radius.
NO
YES
Correct
Factory reset, clearing all memory
For others function:
1 Press the ON/STAND-BY button to turn the power on.
2 Press the AUDIO/LINE (INPUT) button on the remote
control or FUNCTION button repeatedly on the main
unit to select LINE IN function.
3 In LINE IN function, press the
then press and hold the
button on the main unit
button until “RESET” appears.
Maintenance
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
For disc/USB Video function:
Please refer “Changing the Setup Menu” on page 12.
Preference page
Default
Reset
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
programme.
■
Before transporting the unit
Remove the USB memory device and disc from the unit.
Then, set the unit to the power stand-by mode. Carrying
the unit with USB memory device left connected or discs
left inside might damage the unit.
E-37
11/8/24
08_XL-E171DVH_EN.fm
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
■
Video Section
Signal level
Composite: 1 Vp-p (75 ohms)
S-video:
Y: 1 Vp-p (75 ohms)
C: 0.286 Vp-p (75 ohms)
Component Video:
Y: 1.0 Vp-p (75 ohms)
Pb, Pr: 0.7 Vp-p (75 ohms)
Type A (19-pin)
General
Power source
AC 220 - 240 V ~ 50/60 Hz
Power
consumption
Power on: 50 W
Power stand-by: 0.4 W (*)
HDMITM terminal
Dimensions
Width: 215 mm (8 - 1/2")
Height: 96 mm (3 - 4/5")
Depth: 335 mm (13 - 1/5")
■
Weight
3.5 kg (7.7 lbs.)
USB host interface
( * ) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by
mode. Refer to page 7 to cancel the demonstration mode.
■
Amplifier
PMPO: 180 W
MPO: 90 W (45 W + 45 W)
(10% T.H.D.)
RMS: 60 W (30 W + 30 W)
(10% T.H.D.)
RMS: 50 W (25 W + 25 W)
(1% T.H.D.)
Output terminals
Speakers: 4 ohms
20Hz - 20kHz
Video output: 1 Vp-p
Headphones: 16 ohms
(recommended: 32 ohms)
Input terminals
Other
File system support
Audio In (audio signal):
500 mV/47 k ohms
Line in (Analogue input):
500 mV/47 k ohms
■
DVD player
Signal system
Support file
Bitrate support
Output power
■
USB
PAL/NTSC colour
● Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage Class.
● Support Bulk only and CBI
protocol.
● MPEG 1 Layer 3
● WMA (Non DRM)
● JPEG image (USB Video only)
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
● Maximum total number of MP3/
WMA files is 1024.
● Maximum total number of folders
is 255 INCLUSIVE of root
directory.
● The ID3TAG information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1 and
version 2.
● Support USB devices with
Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
● 2 kbyte block length for sector.
Tuner
Frequency range
FM: 87.5 - 108 MHz
Preset
40 (FM station)
Supported disc DVD (with the same region number on the
types
back of the unit), SVCD, VCD, audio CD,
CD-R, CD-RW, JPEG, DivX (version 3.0)
■
Video signal
Horizontal resolution: 500 lines
S/N ratio: 70 dB
Type
Audio signal
Frequency
characteristic
2-way type speaker system
5 cm (2") Tweeter
10 cm (4") woofer
Maximum input
power
60 W
Rated input power
30 W
Impedance
4 ohms
Dimensions
Width: 132 mm (5-3/16")
Height: 260 mm (10-5/16")
Depth: 175 mm (6-59/64")
Weight
2.0 kg (4.4 lbs.)/each
S/N radio
Linear PCM DVD: 20 Hz to
20 kHz (sampling rate: 48
kHz)
20 Hz to 20 kHz (sampling
rate: 96 kHz)
CD: 20 Hz to 20 kHz
CD: 94 dB (1 kHz)
Speaker
Dynamic range Linear PCM DVD: 95 dB
CD: 94 dB
Total harmonic
distortion ratio
0.01% maximum
E-38
11/8/24
08_XL-E171DVH_EN.fm
1
2
3
4
5
6
7
8