Philips AJ5300D/12 User manual User manual

Add to my manuals
29 Pages

advertisement

Philips AJ5300D/12 User manual User manual | Manualzz
Register your product and get support at
www.philips.com/welcome
AJ5300D
EN User manual
A
a
f
b
c
e
d
g
l
h
k
i
j
B
C
SOURCE
D
E
VOLUME
EN
1
Important
Safety
Heed all warnings, and follow all instructions.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from the clock radio.
Unplug the clock radio during lightning storms or when unused for
long periods of time.
!
"
!
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
The clock radio shall not be exposed to dripping or splashing.
Do not place any sources of danger on the clock radio (e.g. liquid
#
Where the plug of the Direct Plug-in Adapter is used as the
disconnect device, the disconnect device shall remain readily
operable.
Warning
Never remove the casing of this clock radio.
Never place this clock radio on other electrical equipment.
$%
&
%'
2
heat.
)
%
%*
apparatus to rain or moisture.
Ensure that you always have easy access to the power cord, plug
or adapter to disconnect this clock radio from the power.
Your Docking Entertainment
System
Congratulations on your purchase, and welcome to Philips! To fully
1
www.philips.com/welcome.
If you contact Philips, you will be asked for the model and serial number
of this apparatus. The model number and serial number are on the
bottom of the apparatus. Write the numbers here:
Model No. __________________________
"
2444444444444444444444444444
Introduction
With this clock radio, you can
listen to FM radio;
enjoy audio from iPod/iPhone or an external device;
set alarms to ring at different time;
choose buzzer, radio, or audio in iPod/iPhone as your alarm source;
experience various features brought by HomeStudio app.
What’s in the box
Check and identify the contents of your package:
Main unit
DC adaptor
User manual
Overview of the main unit
a
AL1/AL2
"
View alarm settings.
Activate/deactivate alarm timer.
b
SOURCE
"
c
d
Turn on/off the clock radio.
DOCK
Dock for iPod/iPhone.
e
f
- VOLUME +
Adjust volume.
SNOOZE/BRIGHTNESS
"6
Adjust display brightness.
g
TIME SET
"
h
TUNING
Tune or scan to an FM radio station.
i
DC IN
Power supply socket.
j
k
FM ANTENNA
Improve FM reception.
MP3-LINK
Connect an external audio device.
l
SLEEP
"
3
Get started
Caution
Use of controls or adjustments or performance of procedures other than
herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
Connect power
Caution
Risk of product damage! Make sure that the power voltage corresponds to
the voltage printed on the back or underside of the unit.
Risk of electric shock! When you unplug the power adapter, always pull the
plug from the socket. Never pull the cord.
Before connecting the power adapter, make sure that you have completed
all other connections.
Use the supplied power adapter only.
Turn on
Press .
» The clock radio switches to the last selected source.
Switch to standby mode
Press
to switch the clock radio to standby mode.
» )%
Set time and date
1 In standby mode, press and hold TIME SET on the back of your
clock radio for more than two seconds.
» [12H] or [24H] begins to blink.
/
2 Press
repeatedly to select 12/24 hour format.
3 Press TIME SET
» The hour digits begin to blink.
4 Repeat steps 2-3 to set hour and minute.
Note
If clock is not manually set, when iPod/iPhone is connected, the unit
synchronizes time from the iPod/iPhone automatically.
Tip
The accuracy of the transmitted time depends on the docked iPod/iPhone
that transmits the time signal.
4
Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this clock radio.
Compatible iPod/iPhone
The unit supports the following iPod, iPhone models:
Made for.
iPod classic
1<=>
?
1<=>
?@G
1?"
iPhone 4
1>K"
iPhone 3G
iPhone
Install HomeStudio App
Philips HomeStudio app brings a suite of new features to your clock
radio, including FM radio programming and a multi-function alarm
clock. To enjoy more features, you are recommended to install this free
HomeStudio app.
Note
Make sure that your iPod/iPhone is connected to the Internet.
1 Press SOURCE repeatedly to select DOCK mode.
2 Insert your iPod/iPhone into the dock.
3 S
X&%HomeStudio
app on your iPod/iPhone.
4 Tap [Yes]
!
5 Follow the on-screen instructions to complete the installation.
Philips HomeStudio app only can be installed in the following iPod,
iPhone models:
1<=>
?
1?"
iPhone 4
1>K"
iPhone 3G
iPhone
Play music in the iPod/iPhone
Note
Make sure that you have installed the HomeStudio app on your iPod/iPhone.
1 Tap HomeStudio icon on your iPod/iPhone.
» The clock/alarm setting screen appears.
2 "&
3 "
%
.
» Music streams from your iPod/iPhone to the clock radio.
Use more features with “HomeStudio App”
Note
Make sure that your iPod/iPhone is inserted into the clock radio.
Set clock, alarm, and sleep timer:
1 Launch the HomeStudio app.
2 On the screen below, tap the setting icon .
» You can set clock, sleep timer, and alarm for your clock radio.
Note
The alarms set with your clock radio will appear under [Dock Alarm] (dock
You can also set more alarms by tapping
on the top right of the alarm
setting screen.
Store FM radio stations manually:
1 "
&
2 Press
to tune to a radio station.
3 Press [SAVE] » [SAVE] » The radio station is saved successfully.
4 If [SAVE]
a number to save stations directly.
Tip
If you need not preset more stations, press [SAVE]
Use more features:
"
*
[\
set the theme;
share the information;
set the location for weather report;
choose temperature unit;
select month/day display mode;
store radio stations automatically by tapping [Radio Auto Program]
» [Searching] » All available stations are stored.
» )
Charge the iPod/iPhone
When your clock radio is connected to power, the docked iPod/iPhone
begins to charge automatically.
Remove the iPod/iPhone
Pull the iPod/iPhone out of the dock.
Listen to radio
Note
Keep the unit away from other electronic devices to avoid radio interference.
For better reception, do not place iPod/iPhone into the dock when you
listen to the radio. Fully extend and adjust the position of the FM antenna.
Tune to FM radio stations
You also can tune to radio stations from your clock radio.
1 Press SOURCE repeatedly to select FM tuner.
/
on the back of your clock radio for more
2 Press and hold
than two seconds.
» The radio tunes to a station with strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a station manually:
Press
/
Play from an external device
You can also listen to an external audio device through this clock radio.
1 Press SOURCE to select the AUX source.
2 ]^1>%\
the MP3-LINK%>@%
%
the headphone socket of an external device.
3 "
Adjust volume
5
Other features
Set alarm timer
Set alarm
You can set two alarms to ring at different time. Buzzer, FM radio, or
your last listened audio in the iPod/iPhone can be selected as alarm
sound.
Note
Make sure that you have set the clock correctly.
1 Press and hold AL1/AL2 for more than two seconds to activate
alarm setting mode.
» The hour digits and alarm icon begin to blink.
2 Press
/
repeatedly set the hour.
3 press AL1/AL2
» The minute digits begin to blink.
4 Repeat steps 2-3 to set the minute, select an alarm source (buzzer,
S^
%#
Tip
If iPod/iPhone is selected as alarm source, but no iPod/iPhone is
connected, the clock radio switches to buzzer source instead.
S
%
the nature sounds stored in the HomeStudio app as alarm sound.
Activate/deactivate alarm timer
1 Press AL1/AL2.
» The alarm settings are displayed.
2 Press AL1/AL2 repeatedly to activate or deactivate the alarm timer.
» [AL1] or [AL2] is displayed if the alarm timer is on and
disappears if it is off.
To stop the ringing alarm, press the corresponding AL1/AL2.
» The alarm repeats ringing for the next day.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine minutes later.
Set sleep timer
This clock radio can switch to standby mode automatically after a preset
period.
Press SLEEP
appears.
» When the sleep timer is activated,
To deactivate the sleep timer, press SLEEP repeatedly until OFF appears.
Adjust display brightness
Press BRIGHTNESS repeatedly to select different brightness levels.
6
Product information
Note
Product information is subject to change without prior notice.
Rated Output Power
=`={^"
Frequency Response
40-20000 Hz
"2
>65 dB
Total Harmonic Distortion
<1%
€*^1>%
‚Gƒ^"<‚%
Tuner (FM)
Tuning range
87.5-108 MHz
Tuning grid
50 KHz
"
X^=G†"2
X"
?G†"2
<22 dBf
<46 dBf
"
"
30 dBf
Speakers
"%

4 ohm
"
>82 dB/m/W
General information
€]&
&
Brand name: Philips;
Model: Y12FE-050-2000G;
Input: 100-240 V~, 50-60 Hz; 0.35 A;
2000 mA;
Output: 5 V
Operation Power Consumption
<10 W
"1&
]
<1 W
Dimensions: Main Unit
{*ˆ*‰
283 x 118 x 112 mm
Weight:
-Main Unit
-With Packing
0.654 kg
0.812 kg
7
Troubleshooting
Warning
Never remove the casing of this device.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this device, check the following
points before requesting service. If the problem remains unsolved, go
1{&&&
{
Philips, make sure that the device is nearby and the model number and
serial number are available.
No power
Ensure that the AC power plug of the unit is connected properly.
Ensure that there is power at the AC outlet.
No sound
Adjust the volume.
No response from the unit
Disconnect and reconnect the AC power plug, then turn on the unit
again.
Poor radio reception
Increase the distance between the unit and your TV or VCR.
Fully extend the FM antenna.
Alarm does not work
"%
Clock/alarm setting erased
Power has been interrupted or the power plug has been
disconnected.
Reset the clock/alarm.
8
Notice
This product complies with the radio interference
requirements of the European Community.
€
not expressly approved by Philips Consumer Lifestyle may
void the user’s authority to operate the equipment.
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old
products with your normal household waste. Correct disposal of your
old product helps to prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed with normal
household waste.Please inform yourself about the local rules on
separate collection of batteries because correct disposal helps
to prevent negative consequences for the environmental and human
health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make
%
\
*
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
“Made for iPod” and “Made for iPhone” mean that an electronic
1
1
€
performance standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory standards. Please
note that the use of this accessory with iPod or iPhone may affect
wireless performance.
11
%€
‹"
other countries.
2012 © Koninklijke Philips Electronics N.V. All rights reserved.
"
#&)
%
the property of Koninklijke Philips Electronics N.V. or their respective
owners. Philips reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
Note
The type plate is located on the bottom of the apparatus.
Norge
)%Œ
Observer: Nettbryteren er sekundert innkoplet. Den innebygde
%%
%Œ
tilsluttet nettkontakten.
S
Œ
%
%%
apparatet ikke utsettes for regn eller fuktighet.
All registered and unregistered trademarks are property of their
respective owners.
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
AJ5300D_12_UM_V1.0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 4 W
  • Headphone connectivity: 3.5 mm
  • iPhone, iPod
  • FM radio
  • Silver

Related manuals

Frequently Answers and Questions

How do I activate/deactivate an alarm?
Press the AL1/AL2 button repeatedly to activate or deactivate the alarm timer.
What if I want to charge my iPod/iPhone?
When your clock radio is connected to power, the docked iPod/iPhone begins to charge automatically.
How can I adjust volume?
Press the +/-VOLUME buttons to adjust the volume.
What is DC IN used for?
The DC IN socket is for connecting the power supply.
How do I switch between different modes?
Press the SOURCE button repeatedly to select the desired mode (DOCK, FM, AUX).
How do I connect an external audio device?
Use the MP3-Link socket to connect an external audio device via a 3.5mm audio cable.
Download PDF

advertisement