Philips 3000 series LCD TV 42PFL3007D

Register your product and get support at
www.philips.com/welcome
PFL30x7D
PFL35x7D
PFL37x7D
PFL40x7D
PFL40x7G
PFL47x7G
EN User Manual
Contents
1
2
3
4
5
6
EN
Get started
3
TV tour
TV controls
Important information
Sustainability
Help and support
3
4
6
10
12
Use your TV
13
Watch TV
View program guide
View media
Browse Smart TV
Interactive TV
13
16
17
18
19
Use more of your TV
21
Pause TV
Play games
Use EasyLink
Set locks and timers
View Scenea
21
22
23
25
27
Set up your TV
28
Picture and sound
Channel settings
Language settings
Universal access settings
Other settings
Update software
Restore default settings
28
29
30
31
31
32
32
Connect your TV
33
About cables
Connect devices
Connect more devices
Watch a connected device
Network and the Internet
33
35
41
43
44
Troubleshooting
47
General issues
Channel issues
Picture issues
Sound issues
Connection issues
Network issues
Contact Philips
47
47
48
48
49
49
50
2
7
8
Product specifications
51
Power and reception
Display and sound
Display resolutions
Multimedia
Connectivity
Supported TV mounts
Help version
51
51
52
52
53
54
56
Index
57
TV tour
High Definition TV
You can watch HD video in these ways and
more:

a Blu-ray disc player, connected with an
HDMI cable, playing a Blu-ray disc

an upscaling DVD player, connected
with an HDMI cable, playing a DVD
disc

an over-the-air HD broadcaster
(SBTVD-T)

a digital HD receiver, connected with
an HDMI cable, playing HD content
from a cable operator

an HD game console, connected with
an HDMI cable, playing an HD game
Smart TV
*Applicable to PFL4xx7 only.
You can make your TV the center of your
digital life with the Smart TV* suite of
applications:

If you connect your TV to the home
network, you can share movies, pictures,
and music from a computer or media
server on your home network.*

If you connect your TV to the Internet,
you can enjoy a wealth of streaming
movies, pictures, music, and much more
with Youtube Leanback* and other
Smart TV* applications.

While you watch a digital channel, you
can Pause TV at any time and catch up
with the broadcast later. The broadcast
is stored on a USB hard drive.

Add a new dimension to your calls and
contact your friends and relatives on
the big screen. You can make video
calls on your TV with a Philips HD
Media box and a Philips TV video
camera (both sold separately). Enjoy
HD video and excellent sound quality
from the comfort of your couch and
start calling now!*
Media playback
If you connect your TV to a USB storage
device, you can enjoy your movies, music,
and pictures on a wide screen TV with
excellent sound.
Program guides
You can find out what's on and what's
coming up, with the now and next EPG
(Electronic Program Guide), or eight day
EPG.
EasyLink
If you connect your TV to HDMI-CEC
(Consumer Electronic Control) enabled
devices, such as a Blu-ray player or home
theater, you can control them at the same
time with one remote control. Simply switch
on EasyLink after connection.
Intuitive menus
With the TV's intuitive menus, you can easily
access the channel or media file that you
want, or tweak the TV settings to suit your
needs.
EN
3
English
1 Get started
TV controls
Sensors
Rear controls
1.
(Standby): Switch the TV on or off.
2. CH +/- (Channel +/-): Switch to the next
or previous channel.
3.
(Source): Access a connected device.
4.
+/- (Volume +/-): Increase or
decrease volume.
For PFL30x7 - 22 to 24 inch TVs
For PFL37x7, PFL47x7 - 32 to 46 inch TVs
1. Remote control sensor
Point the remote control at the sensor.
Make sure that the line-of-sight between the
remote control and the TV is not blocked by
furniture or other objects.
For PFL30x7, PFL35x7, and PFL40x7 - 32
to 47 inch TVs
1. Remote control sensor
Point the remote control at the sensor.
Make sure that the line-of-sight between the
remote control and the TV is not blocked by
furniture or other objects.
EN
4
English
Remote control
1.
(Standby): Switch the TV on or to
standby.
2. Play buttons: Control playback of media
files.
3.
SOURCE: Access a connected
device.
4.
FORMAT: Change picture format.
5.
TV: Switch source to watch TV.
6.
(Home): Access the Home menu.
7. OK: Confirm an entry or selection.
8.
(Navigation buttons): Navigate
through menus and select items.
9.
LIST: Access the TV channel list.
10.
INFO: Display information about
current activity.
11.
ADJUST: Adjust TV settings.
12.
OPTIONS: Access currently available
options.
13.
(Back): Return to the previous menu
page or exit from a TV function.
14. CH - / CH +: Switch channels.
15. +/- (Volume): Adjust volume.
16.
(Mute): Mute or restore audio.
17. Color buttons: Select tasks or options.
The buttons function according to the
services offered by the service provider.
18. EXIT: Exit from menus or TV functions.
19. 0-9 (Numeric buttons): Select TV
channels or enter text.
20. . (Dot): Use for digital channels input.
EasyLink controls
Note: EasyLink controls are available when
the connected device is HDMI-CEC
compliant.
With EasyLink controls, you can control your
TV and other HDMI-CEC devices with one
remote control.
Access EasyLink controls
1. While you view content from a connected
HDMI-CEC device, press
OPTIONS.
2. Select [Show remote control], then press
OK.
3. Select the EasyLink control button, then
press OK.
Read more about EasyLink in Use more of
your TV > Use EasyLink (Page 23).
EN
5
Important information
Safety
Read and understand all instructions before
you use your TV. If damage is caused by
failure to follow the instructions, the
warranty does not apply.
Risk of electric shock or fire!

Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.

Never place the TV, remote control or
batteries near naked flames or other
heat sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.





EN
Never insert objects into the ventilation
slots or other openings on the TV.
Never expose the remote control or
batteries to rain, water or excessive
heat.
Avoid force coming onto power plugs.
Ensure that the power plug is fully
inserted into the power socket. Loose
power plugs can cause arcing or fire.
When the TV is swiveled, ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
To disconnect the TV from the mains
power, the power plug of the TV must
be disconnected. When disconnecting
the power, always pull the power plug,
never the cord. Ensure that you have
full access to the power plug, power
cord and outlet socket at all times.
6
Risk of damage to the TV!

Two people are required to lift and
carry a TV that weighs more than 25kg
or 55lbs.

When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat,
level surface that can support the
combined weight of the TV and the
stand.

When wall mounting the TV, use only a
wall mount that can support the weight
of the TV. Secure the wall mount to a
wall that can support the combined
weight of the TV and wall mount. TP
Vision Netherlands B.V. bears no
responsibility for improper wall
mounting that results in accident, injury
or damage.

If you need to store the TV,
disassemble the stand from the TV.
Never lie the TV on its back with the
stand installed.

Before you connect the TV to the
power outlet, ensure that the power
voltage matches the value printed on
the back of the TV. Never connect the
TV to the power outlet if the voltage is
different.

Parts of this product can be made of
glass. Handle with care to avoid injury
and damage.
Risk of injury to children!
Follow these precautions to prevent the TV
from toppling over and causing injury to
children:

Never place the TV on a surface
covered by a cloth or other material
that can be pulled away.

Ensure that no part of the TV hangs
over the edge of the surface.

Never place the TV on tall furniture,
such as a bookcase, without anchoring
both the furniture and TV to the wall
or a suitable support.

Educate children about the dangers of
climbing on furniture to reach the TV.
Screen care





Risk of damage to the TV screen!
Never touch, push, rub or strike the
screen with any object.
Unplug the TV before cleaning.
Clean the TV and frame with a soft
damp cloth. Never use substances such
as alcohol, chemicals or household
cleaners on the TV.
To avoid deformations and color fading,
wipe off water drops as soon as
possible.
Avoid stationary images as much as
possible. Stationary images are images
that remain onscreen for extended
periods of time. Stationary images
include onscreen menus, black bars,
time displays, etc. If you must use
stationary images, reduce screen
contrast and brightness to avoid screen
damage.
Lock the TV
Your TV is equipped with a Kensington
security slot at the base of the TV. To secure
the TV, purchase a Kensington anti-theft lock
(sold separately).
EN
7
English
Risk of swallowing batteries!

The product/remote control may
contain a coin type battery, which can
be swallowed. Keep the battery out of
reach of children at all times!
Risk of overheating!

Never install the TV in a confined space.
Always leave a space of at least 4
inches or 10 cm around the TV for
ventilation. Ensure that curtains or
other objects never cover the
ventilation slots on the TV.
Risk of injury, fire or power cord damage!

Never place the TV or any objects on
the power cord.

Disconnect the TV from the power
outlet and aerial before lightning storms.
During lightning storms, never touch
any part of the TV, power cord or
aerial cable.
Risk of hearing damage!

Avoid using earphones or headphones
at high volumes or for prolonged
periods of time.
Low temperatures

If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting
the TV to the power outlet.
Notice
Pixel characteristics
2012 © TP Vision Netherlands B.V. All rights
reserved. Specifications are subject to change
without notice. Trademarks are the property
of Koninklijke Philips Electronics N.V or their
respective owners. TP Vision Netherlands
B.V. reserves the right to change products at
any time without being obliged to adjust
earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other
than those specified herein, confirmation of
their validity and suitability must be obtained.
TP Vision Netherlands B.V. warrants that the
material itself does not infringe any United
States patents. No further warranty is
expressed or implied.
TP Vision Netherlands B.V. cannot be held
responsible neither for any errors in the
content of this document nor for any
problems as a result of the content in this
document. Errors reported to Philips will be
adapted and published on the Philips
support website as soon as possible.
Terms of warranty

Risk of injury, damage to TV or void of
warranty! Never attempt to repair the
TV yourself.

Use the TV and accessories only as
intended by the manufacturer.

The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Care for
service or repairs.
This LCD/LED product has a high number of
color pixels. Although it has effective pixels
of 99.999% or more, black dots or bright
points of light (red, green or blue) may
appear constantly on the screen. This is a
structural property of the display (within
common industry standards) and is not a
malfunction.

EN
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not
recommended or authorised in this
manual shall void the warranty.
8
Compliance with EMF
TP Vision Netherlands B.V. manufactures
and sells many products targeted at
consumers, which, like any electronic
apparatus, in general have the ability to emit
and receive electromagnetic signals.
One of Philips‘ leading Business Principles is
to take all necessary health and safety
measures for our products, to comply with
all applicable legal requirements and to stay
well within the Electro Magnetic Field (EMF)
standards applicable at the time of producing
the products.
Philips is committed to develop, produce
and market products that cause no adverse
health effects. TP Vision confirms that if its
products are handled properly for their
intended use, they are safe to use according
to scientific evidence available today.
Philips plays an active role in the
development of international EMF and safety
standards, enabling Philips to anticipate
further developments in standardisation for
early integration in its products.
*Compliance with EMF is applicable for
PFL30x7, PFL35x7, and PFL40x7 only.
Trademarks and copyrights
This product contains software licensed
under an open source license. For
acknowledgments and license texts, please
refer to the electronic in-product user
manual. TP Vision Netherlands B.V. hereby
offers to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such offer is
requested by the respective licenses. This
offer is valid up to three years after product
purchase to anyone in receipt of this
information. To obtain source code, please
send your request in English with product
number to
―Open Source Team, TP Vision Netherlands
B.V., High Tech Campus 5, 5656 AE
Eindhoven, The Netherlands‖.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
English
Open source software
Manufactured under license from Dolby
Laboratories. Dolby and the double D
symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
Kensington and Micro Saver are registered
US trademarks of ACCO World
corporation with issued registrations and
pending applications in other countries
throughout the world.
DLNA® , the DLNA Logo and DLNA
CERTIFIED® are trademarks, service marks,
or certification marks of the Digital Living
Network Alliance.
DLNA is applicable for PFL4xx7D and
PFL4xx7G only.
EN
9
Sustainability
The DTVi brand and logo are registered
marks of Pontifical Catholic University of Rio
de Janeiro (PUC-Rio) and the Federal
University of Paraíba (UFPB).
DTVi is applicable for PFL4xx7G only.
Java and all Java based trademarks are
registered trademarks of Oracle and/or its
affiliates, in the United States and other
countries.
Java is applicable for PFL4xx7G only.
AstroTV product is a software system
developed by TQTVD that comprises of a
complete implementation of the Ginga
Middleware Standard, compliant with
Brazilian SBTVD Standard nr. 6 (Vols 1, 2 3
and 4 – see references below).
Astro TV Middleware acknowledges the use
of the following libraries internally:
Boost – http://www.boost.org
Libxml2v – http://www.xmlsoft.org/
Webkit / OWB –
http://www.sand-labs.org/owb
Libjpeg - http://www.ijg.org/
Lua – http://wwwlua.org/
OpenSSL – http://www.openssl.org/
SWIG – http//www.swig.org
LuaJava –
http://www.keplerproject.org/luajava
LibCURL – http://curl.hazz.se
TQTVD is applicable for PFL4xx7G only.
All other registered and unregistered
trademarks are the property of their
respective owners.
EN
10
Energy efficiency
This TV is designed with energy-efficient
features. To access these features, press the
green button on the remote control.

Energy saving picture settings: You can
apply a combination of energy-saving
picture settings. While you watch TV,
press the Green button, then select
[Energy saving].

Screen off: If you only want to listen to
audio from the TV, you can switch off
the TV display. Other functions
continue to operate normally.

Low standby power: The advanced
power circuitry reduces the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.

Power management: The advanced
power management helps save the
energy consumed by this TV.
To view how your personalized TV
settings affect the TV's relative power
consumption, press , then select
[Setup] > [Watch demos] > [Active
Control].

Auto switch off: To conserve energy,
set the TV to switch off automatically
after a period of inactivity.

Switch off inactive devices: Switch off
connected EasyLink devices all at once.


Seu produto foi projetado e fabricado com
materiais e componentes de alta qualidade,
que podem ser reciclados e reutilizados.
Baterias e Pilhas
Pilhas e baterias descartadas recebidas
pela TP Vision serão encaminhadas à
destinação ambientalmente correta.
Em caso de dúvida ou consulta, favor
ligar para (11) 2938 0245 (Grande São
Paulo) e 0800 701 0245 (demais
regiões e estados) ou acessar o site
http://www.philips.com.br.
Linha Verde
Em caso de dúvidas relacionadas a
Sustentabilidade e Meio Ambiente, favor
ligar para a linha verde (92) 3652 2525. A
TP Vision e o Meio Ambiente agradecem
sua colaboração.
ADVERTÊNCIA: Cuidados com a utilização
e descarte de pilhas e baterias.
Não descarte as pilhas e baterias no

lixo doméstico.
O descarte inadequado de pilhas e

baterias pode representar riscos ao
meio ambiente e à saúde humana.
Para contribuir com a qualidade

ambiental e com sua saúde, a TP Vision
receberá as pilhas e baterias fornecidas
com seus produtos após seu fim de
vida. A TP Vision dispõe de pontos de
coleta em suas Assistências Técnicas.
Para evitar o vazamento de pilhas ou

baterias, o que pode resultar em danos à
saúde, ambientais e ao produto,
recomendamos que: (i) Em caso de
aparelhos com pilhas removíveis,
retire-as quando não estiver em uso por
um longo período, (ii) Não misture
pilhas (antigas com novas ou de
zinco-carbono com alcalinas, etc.) (iii)
Não exponha o produto com
pilhas/baterias em seu interior a altas
temperaturas.
EN
11
English
Descarte do produto e de pilhas
antigas
Help and support
Use Help
To access the onscreen Help menu, press
the Yellow button.
To switch between the Help menu and the
TV menu, press the Yellow button.
Visit Philips website
If you can't find what you need in the
onscreen [Help], visit the Philips support
website at www.philips.com/support.
At the Philips support website, you can also:

Find answers to Frequently Asked
Questions (FAQ)

Download a printable PDF version of
this user manual

Email us a specific question

Chat online with Philips Consumer
Care (available in certain countries
only)
Search the TV forum
Your question may have already been
answered by the Philips TV community of
users. Visit www.supportforum.philips.com.
Contact Philips
You can contact Philips Consumer Care in
your country for support. The number is
available in the leaflet accompanying this
product, or online at
www.philips.com/support.
Before you contact Philips, write down the
model and serial number of your TV. You
can find this information on the back of your
TV or on the TV packaging.
EN
12
Watch TV
Switch TV on or off
Automatic switch off
You can save energy with this TV's energy
efficiency settings. The settings are enabled
by default, so that if there is no user
interaction (such as pressing a remote
control button or a control on the rear
panel) for four hours, the TV will
automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
3. Use the Navigation buttons to make a
selection, then press OK.
Adjust TV volume
Increase or decrease the TV volume

Press +/- on the remote control.

Press
+/- on the side of the TV.
Switch the TV on

Press the power switch on the TV.

If the TV is in standby, press
on the
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press CH +/- on the TV.
Switch TV to standby
Press
on the remote control.
The remote control sensor on the TV
switches to red.
Switch off the TV
Press
on the TV.
The TV switches off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Mute or unmute the TV volume

Press
on the remote control to
mute the volume.

Press
again to restore the volume.
Adjust headphone volume
1. Press
> [Setup] > [TV settings] >
[Sound].
2. Select [Headphone volume], then press
OK.
EN
13
English
2 Use your TV
Switch TV channels
Manage channel lists

After the channels are installed, you can
manage them:

Rename channels

Hide or unhide channels
Rename channels
You can rename channels. The name
appears when the channels are selected.
1. While you watch TV, press
LIST.
The channel list is displayed.
2. Select the channel to rename, then press
OPTIONS.
3. Select [Rename channel], then press OK.

Press CH +/- on the remote control or
TV.
Press the Numeric buttons to enter a
channel number.
Manage favorites
You can view all channels, or only a list of
your favorite channels so that you can find
them easily.
Press
LIST to access the channel list.
Create a list of your favorite channels
1. Press
LIST.
2. Select the channel to mark as favorite,
then press
OPTIONS.
3. Select [Mark as favorite], then press OK.
The selected channel is marked.
To deselect a channel, select [Unmark as
favorite], and then press OK.
Select a channel list
1. Press
LIST, then press
OPTIONS.
2. Select [Select list] > [Favorite] to display
channels in the favorite list or [All] to display
all channels.
3. Press OK to confirm.
EN
14
4. Press the Navigation buttons to select
each character, then press OK.

Press OK in the entry screen to enable
the Onscreen Keyboard, or

Press [ABC] or [abc] to select an
uppercase or lowercase letter.
5. Once complete, select [Done], then press
OK to confirm when prompted.
6. Press EXIT to exit.
Hide channels
You can prevent unauthorized access to
channels by hiding them from the channel
list.
1. While you watch TV, press
LIST.
2. Select the channel to hide, then press
OPTIONS.
3. Select [Hide channel], then press OK.
The channel is hidden.
Unhide channels
1. While you watch TV, press
LIST.
2. Press
OPTIONS.
3. Select [Show hidden channels], then press
OK.
Hidden channels are displayed in the channel
list, but they cannot be watched
4. Select a hidden channel, then press
OPTIONS.
5. Select [Unhide channel], then press OK.
The hidden channel can be watched.
6. To exit, press
OPTIONS, then select
[Exit].
Use smart settings
You can watch a connected device in one of
these ways:

Add its icon to the Home menu for
easy access, then select it from the
Home menu.

Select from the Source menu.
Note: If you connect an HDMI-CEC
compliant device to the TV, it is
automatically added to the Home menu.
Add new device
Your TV comes with smart picture and
sound settings. You can apply these settings
or customize them.
Select your preferred picture setting
1. Connect and switch on the device.
2. Press .
3. Select [Add new device], then press OK.
4. Follow the onscreen instructions.

If you are prompted to select the TV
connection, select the connector that
this device uses.
View from Home menu
After you add the new device to the Home
menu, you can select its icon to start using it.
1. Press .
2. Select the device icon from the Home
menu.
3. Press OK to confirm.
View from Source menu
You can also press
SOURCE to display
a list of connector names. Select the
connector that connects the device to the
TV.
1. Press
SOURCE.
2. Press the Navigation buttons to select a
connector in the list.
3. Press OK to confirm.
1. While you watch TV, press
ADJUST.
2. Select [Smart picture].
3. Select an option, then press OK:

[Personal]: Apply your personalized
picture settings.

[Vivid]: Rich and dynamic settings, ideal
for daytime viewing.

[Football]: Ideal settings for football
matches.

[Cinema]: Ideal settings for movies.

[Game]: Ideal settings for games.

[Energy saving]: Settings that conserve
the most energy.

[Standard]: Default settings that suit
most environments and types of video.

[Photo]: Ideal settings for photos.

[Custom]: Customize and store your
own picture settings.
Select your preferred sound setting
1. While you watch TV, press
ADJUST.
2. Select [Smart sound].
3. Select an option, then press OK:

[Personal]: Apply your personalized
sound setting.

[Standard]: Settings that suit most
environments and types of audio.

[NEWS]: Ideal settings for spoken
audio, such as the news.

[Cinema]: Ideal settings for movies.

[Game]: Ideal settings for games.

[DRAMA]: Ideal settings for drama
programs.

[SPORTS]: Ideal settings for sports.
EN
15
English
Select a source
Change picture format
You can change the picture format to suit
the video source.
1. Press
FORMAT.
2. Select a picture format, then press OK to
confirm.
The available picture formats depend on the
video source:

[Auto fill]: Adjust the picture to fill the
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.

[Auto zoom]: Enlarge the picture to fill
the screen. Recommended for minimal
screen distortion but not for HD or PC.

[Super zoom]: Remove the black bars
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.

[Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or
PC.

[Wide screen]: Scale 4:3 format to 16:9.
Not recommended for HD or PC.

[Unscaled]: Provide maximum detail for
PC. Only available when PC mode is
selected in the Picture menu.

[16:9 stretch]: Shows widescreen
format content unstretched.

[4:3]: Display the classic 4:3 format.
EN
16
View program guide
You can view information about digital TV
channels using program guides provided by
broadcasters. This information can include:

Channel schedules for the day ('Now
and next') or up to 8 days, if supported
by your broadcaster

Synopsis of programs
Note: Program guides are available in certain
countries only.
Set program guide
Before you use the program guide, check
these settings:
1. Press .
2. Select [Program guide].
Access the TV program guide
1. Press .
2. Select [Program guide], then press OK.
Use TV program guide options
You can customize the displayed information
to:

Remind you when programs start

Display only preferred channels
1. In the program guide, press
OPTIONS.
2. Select an option, then press OK:

[Set reminder]: Set program reminders.

[Clear reminders]: Clear program
reminders.

[Change day]: Select the day to display.

[Show info]: Display program
information.

[Search by genre]: Search TV programs
by genre.

[Scheduled reminders]: List programs
reminders.

[Acquire EPG data]: Update the latest
program information.
What you can do
You can play videos, photos, and music on
your TV from:

Your computer connected through the
home network (For models with
network connector only)

A USB device connected to the TV
Play files from computer
What you need
Available on certain models only.

A wired or wireless home network,
connected with a Universal Plug and
Play (uPnP) router.

Philips wireless USB adapter (PTA127)
or a LAN cable that connects your TV
to your home network.

A media server program running on
your computer

Appropriate settings on your computer
firewall to allow you to run the media
server program
Set up the network
1. Connect your TV and the computer to
the same home network. See Connect your
TV > Network and the Internet (Page 44).
2. Switch on your computer and the router.
Note:
If the apparatus does not return to DLNA
mode due to external electrical disturbances
(e.g. electrostatic discharge), user
intervention is required.
Set up media sharing
1. Install a media server program on your
computer to share media files. Some of the
available media server programs are as
follows:

For PC: Windows Media Player 11 (or
higher) or TVersity

For Mac: Twonky
Play files
1. Press .
2. Select [Browse network], then press OK.
If the network installation starts, follow the
onscreen instructions.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons on the remote
control to control play.
Play files from USB
If you have photos, videos or music files on a
USB storage device, you can play the files on
TV.
Caution:

TP Vision is not responsible if the USB
storage device is not supported, nor is
it responsible for damage or loss of
data in the device.

Do not overload the USB port. If you
connect a USB storage device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
View USB contents
1. Connect the USB device to the USB
connector on the TV.
2. Press , select [Browse USB], then press
OK.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons on the remote
control to control play. See Use your TV >
View Media > Play options.
2. Switch on media sharing on your
computer using the media server. For more
information on how to set up the media
server, refer to the website of the media
server.
EN
17
English
View media
Play options
Watch video
Press the Navigation buttons to select a
video file, then press OK.
to pause.

Press

Press
to stop.
/
to search backward or

Press
forward.

Press EXIT to exit the content
browser.
Video playback options
While you play video, press
OPTIONS
to access the following video options:

[Subtitles]: Select the available subtitles
settings.

[Audio language]: Select the available
audio language.

[Repeat]: Repeat a video, track, or
album.

[Show info]: Display the file name.

[Eco settings]: Select energy-saving
modes.
Listen to music
Press the Navigation buttons to select a
music track, then press OK.

Press
to pause.

Press
to stop.
/
to search backward or

Press
forward within a music track.

Press EXIT to exit content browser.
Music playback options
Press
OPTIONS to access or exit the
following music options:

[Repeat]: Repeat a track or an album.

[Play once]: Play the track once.

[Shuffle on] / [Shuffle off]: Enable or
disable random play of tracks.

[Show info]: Display the file name.

[Eco settings]: Select energy-saving
modes.
View pictures
Press the Navigation buttons to select a
to start the slideshow.
picture, then press

Press
to pause.
to stop.

Press

Press Navigation buttons to search for
a picture.
EN
18

Press EXIT to exit content browser.
Picture slideshow options
Press
OPTIONS to access or exit the
following picture options:

[Slideshow transitions]: Select the
transition from one picture to the next.

[Slideshow frequency]: Select the
display time for each picture in the
slideshow.

[Repeat] / [Play once]: View slideshow
once, or repeatedly.

[Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in
the slideshow.

[Rotate image]: Rotate the picture.

[Show info]: Display the picture
information.

[Set as Scenea]: Load the selected
picture as the TV wallpaper. See Use
more of your TV > View Scenea (Page
27).
Browse Smart TV
What you can do
*Applicable to PFL4xx7 only.
With Internet Applications (Apps), which are
specially adapted Internet websites for your
TV, you can watch videos online.
Note:

Smart TV services and apps vary from
country to country.

Availability of catch-up TV apps and
their TV programs is subject to the
country setting of your TV. To find out
which TV programs are available, access
the TV program guide within the app.

Smart TV displays one page at a time, in
full screen.

Certain websites may not display
completely. Functions that require
plug-ins may be unavailable.

TP Vision Netherlands B.V. bears no
responsibility regarding the content and
the quality of the content provided by
the content service providers.
What you need
Internet
TV
Router
PC
Access Smart TV Applications
(Apps)
If your TV is connected to the Internet
through your home network, you can watch
YouTube videos and view media files from
your home network.
YouTube Leanback
1. Press .
2. Select [YouTube], then press OK.
3. Follow the onscreen instructions to watch
videos.
to exit.
4. Press
Browse network
1. Press .
2. Select [Browse network], then press OK.
3. Select the network to connect.
4. Press the Navigation buttons to select a
file, then press OK.
5. Press EXIT to exit.
English
Interactive TV
1. On your home network, connect the TV
to the Internet.
2. On your home network, connect a router
with a high-speed connection to the
Internet.
3. Switch on the router.
4. Install the network. See Connect your TV
> Network and the Internet (Page 44).
What you can do
*Applicable to PFL4xx7G only.
With interactive TV, you can view additional
information or entertainment pages provided
by digital TV broadcasters. You can
experience true interactivity by responding
directly to the digital content.
Note:
You cannot download files to your TV with
this feature.
Not all TV programs, commercials and
features include closed captioning
information.
Broadcasters use various interactive TV
systems. Visit the broadcaster's website for
more information to see which interactive
system is available in your country.
Here are some examples of interactive
activities you can enjoy:

View information about TV programs

Join a quiz or contest

Play games

Shop online

Pay for a video-on-demand (VOD)
program

Vote

Chat
What you need
To enjoy this service, you need the following:

digital channels with interactive services

a wired or wireless home network,
connected through a Universal Plug and
Play router (uPnP).
For network connection, see Connect your
TV > Network and the Internet.
EN
19
Access interactive TV
Most channels that offer interactive services
invite you to press the Red button or OK to
open their interactive program.
1. Switch to a digital channel with interactive
services.
When the application has loaded, an icon is
displayed.
2. Press the Red button or OK to launch
the interactive application.
3. Follow the onscreen instructions.
4. Press EXIT or the onscreen button to
close the interactive page.
To navigate the interactive pages, use:

The Navigation buttons

The Color buttons

The Numeric buttons

EXIT
To control video play within interactive
pages, press:

to play

to pause

to stop
EN
20
Pause TV
What you can do
While you watch a digital channel, you can
pause a program to answer a phone call or
to have a break. The broadcast is stored on
a USB hard drive that is connected to the
TV. You can resume playback of the
program at any time.
Note:

You can pause a program for a
maximum of 90 minutes.

Closed caption is not applicable in
recording and playback of pause TV.

The USB hard drive is formatted
exclusively for this TV. Keep it
permanently connected to the TV. You
cannot access the USB hard drive
contents from another TV or PC.

Do not overload the USB port. If you
connect a USB hard drive device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
1. Make sure that the TV and the USB hard
drive are switched off.
2. Make sure that there are no other USB
devices connected to the TV.
3. Connect the USB hard drive directly to
the TV, or if you intend to connect other
USB devices in future, connect the USB hard
drive through a USB hub.
Note: While you are formatting the USB
hard drive, do not connect other USB
devices to the TV.
What you need


Tune your TV to receive digital
channels. See Set up your TV >
Channel settings > Automatic install
(Page 29).
Connect a USB 2.0 compatible hard
drive with a minimum capacity of 32
GB and a minimum transfer speed of
30 MB per second.
Install USB hard drive
To pause TV, you must connect a USB hard
drive to the TV and format it.
If the TV does not recognize the USB hard
drive, use a PC to format it to NTFS file
system, and then try again.
Caution:

TP Vision is not responsible if the USB
hard drive is not supported, nor is it
responsible for damage or loss of data
in the device.

Formatting removes all data from the
connected USB hard drive.
4. Switch on the TV and the USB hard drive,
if it has an external power source.
5. Switch to a digital TV channel.
6. Press
to start formatting.
7. Follow the onscreen instructions to
complete the formatting process.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard drive until this
process is complete.
EN
21
English
3 Use more of
your TV
Pause a live TV broadcast
Play games
Add a game console
You can play games consoles projected on a
wide screen TV with excellent sound. Before
you start, connect your game console to this
TV. See Connect your TV > Connect
devices > Game console (Page 38).
For easy access, add the game console to
the Home menu.
1. Press .
2. Select [Add your devices] > [Game
console], then press OK.
3. Follow the onscreen instructions to add
the game console.
1. On a digital channel, press
to pause a
TV program.
2. Press
to continue watching.
The status bar shows these time indicators:
A. When the program was paused for the
first time.
B. Where the paused program is currently
playing.
C. Where the live program is currently
broadcast.

To watch the stored broadcast, press
or
to search backward or
forward.

To watch the live TV broadcast,
press .

To change playback speed, press
or
repeatedly.
The stored broadcast on the USB hard
drive is deleted if you:

Disconnect the USB hard drive.

Switch the TV to standby.

Switch to another channel.

Switch source to watch from a
connected device - a Blu-ray disc player
or digital receiver.
EN
22
Game setting
The Game option in the Smart picture
settings optimizes the TV display for gaming
without picture lag.

If you add the game console to the
Home menu as [Game console], the
TV switches to the game setting
automatically.

If your game console is automatically
added to the Home menu as a Blu-ray
disc player or DVD player, set the
[Smart picture] setting to [Game]
before you start playing.
Switch to Game setting
1. Press
ADJUST.
2. Select [Smart picture] > [Game], then
press OK. The TV is ready for gaming.
Note: When your gaming session ends,
switch back to your usual Smart Picture
setting.
What you can do
You can get the most out of your
HDMI-CEC-compliant devices with Philips
EasyLink enhanced control features. Connect
your HDMI-CEC compliant devices through
HDMI to your TV and control them at the
same time with your TV remote control.
Note: Other brands describe HDMI-CEC
functionality differently. Some examples are
Anynet (Samsung), Aquos Link (Sharp) or
BRAVIA Sync (Sony). Not all brands are fully
compatible with Philips EasyLink.
After you switch on Philips EasyLink, the
following features are available:
One-touch play
When you play an HDMI-CEC compliant
device, the TV switches on from standby and
switches to the correct source.
One-touch standby
When you press
on the TV remote
control, the TV and all HDMI-CEC
compliant devices switch to standby mode.
EasyLink remote control
You can control multiple HDMI-CEC
compliant devices with your TV remote
control.
System audio control
If you connect an HDMI-CEC compliant
device that includes speakers through the
HDMI ARC connector, you can choose to
hear the TV audio from those speakers
instead of the TV speakers.
Synchronize audio
If you connect your TV to a home theater,
you can synchronize the audio and video to
avoid lag between the picture and sound.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link to retain
picture quality.
Maximize display for subtitled video
Some video subtitles can create a separate
subtitle bar under the video, which limits the
video display area. To maximize the video
display area, you can switch on auto subtitle
shift and display the subtitles on top of the
video image.
Switch off connecting device
If your connecting device is not the active
source, you can save energy by setting the
TV to switch it to standby.
What you need

Connect at least two HDMI-CEC
compliant devices through HDMI. See
Connect your TV > Connect devices
(Page 34).

Configure each HDMI-CEC compliant
device properly

Switch on EasyLink
Switch on EasyLink
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink].
3. Select [On] or [Off], then press OK.
Control devices simultaneously
If you connect multiple HDMI-CEC devices
that support this setting, you can control all
such devices through the TV remote control.
Note: This is an advanced setting. Devices
that do not support this setting will not
respond to the TV remote control.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [EasyLink remote control] > [On]
or [Off].
4. Press OK to activate.
Tips:

To switch back to TV control, press ,
then select [Watch TV].

To control another device, press ,
then select the device from the Home
menu.

To exit, press EXIT.
EN
23
English
Use EasyLink
EasyLink buttons
You can control HDMI-CEC compliant
devices with these buttons on the TV
remote control:

: Switch the TV and the connected
device on or to standby.

Play buttons: Control video or music
play.

Numeric buttons: Select a title, chapter
or track.

OK: Start, pause or resume play on the
connected device, activate a selection,
or access the device menu.

/
: Search backwards and
forwards on the connected device.

: Display the TV Home menu.
You can also control devices through other
EasyLink buttons that are available through
the On-Screen Remote Control (OSRC).
To access the OSRC
1. While you view content from a connected
device, press
OPTIONS.
2. Select [Show remote control], then press
OK.
3. Select an onscreen button, then press OK.
4. Press EXIT to exit.
Select speaker output
If the connected device is HDMI-CEC
compliant, you can output TV audio through
an HDMI cable. Make sure you connect the
device to the HDMI connector on the TV.
See Connect your TV > About cables >
HDMI (Page 33).
Configure TV speakers
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3. Select an option, then press OK:

[Off]: Switch off TV speakers.

[On]: Switch on TV speakers.

[EasyLink]: Stream TV audio through
the HDMI-CEC device. Switch the TV
audio to the connected HDMI-CEC
audio device through the Adjust menu.

[EasyLink autostart]: Switch off TV
speakers automatically and stream TV
audio to the connected HDMI-CEC
audio device.
EN
24
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] is
selected, you can change how the TV audio
is streamed to the connected HDMI-CEC
device.
1. While you watch TV, press
ADJUST.
2. Select [Speakers], then press OK.
3. Select one of the following, then press
OK:

[TV]: On by default.
Stream TV audio through TV and the
connected HDMI-CEC audio device
until the connected device switches to
system audio control. TV audio is then
streamed through the connected
device.

[Amplifier]: Stream audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continues to stream from
the TV speakers. If [EasyLink autostart]
was selected, the TV prompts the
connected device to switch to system
audio mode.
With HDMI ARC compliant device
If an HDMI-ARC compliant device is
connected through an HDMI ARC
connector to the TV, you can output TV
audio through the HDMI cable. You will not
need an additional audio cable.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [HDMI 3 - audio out] > [On].
4. Select one of the following, then press
OK.

[On]: Hear the TV audio through the
connected ARC compliant device.

[Off]: Hear the TV audio through the
TV speakers, or through a device
connected through the optical audio
out connector.
5. Control playback with the TV remote
control play buttons.
Switch off connecting device
If your TV is connected to a home theater
and there is a lag between the picture and
the sound, you can synchronize them.

If you are using a Philips home theater,
the audio and video are automatically
synchronized.

For other home theater brands, you
need to switch on the audio sync delay
on the TV to synchronize the audio and
video.
Switch on Audio Out Delay
1. Press .
2. Select [Setup] > [TV settings] > [Sound].
3. Select [Audio out delay] > [On], then
press OK.
You can set the TV to switch off connecting
HDMI-CEC compliant devices if they are not
the active source. The TV switches the
connecting device to standby after 10
minutes of inactivity.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [Auto switch off devices] > [On],
then press OK to activate.
Retain picture quality
You can display a clock on the TV. The clock
displays the time that is broadcast by your
TV service operator.
Display the TV clock
1. While you watch TV, press
OPTIONS.
2. Select [Clock], then press OK.
The clock is displayed on the top right hand
corner of the TV screen.
Change the clock mode
You can change the clock mode to
automatic or manual. By default, it is set to
automatic mode, which automatically
synchronizes it to Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual].
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link.
Switch on Pixel Plus Link
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [Pixel Plus Link] > [On], then press
OK.
Maximize video display
Some subtitles create a separate subtitle bar
under the video that limits the video display
area. To maximize the video display area,
you can switch on auto subtitle shift. The
subtitles then display over the video image.
Switch on auto subtitle shift
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [Auto subtitle shift].
3. Select [On], then press OK to activate.
Note: Make sure that the picture format of
the TV is set to [Auto format] or [Movie
expand 16:9].
Set locks and timers
Clock
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Clock] > [Auto clock].
4. Select [Automatic] or [Manual], then
press OK.
Change the time zone
In countries with clock transmission data, you
can change the time zone if [Auto clock] >
[Automatic] is selected.
1. In the [Clock] menu, select [Time zone].
2. Select your time zone, then press OK.
EN
25
English
Synchronize audio
Set the clock manually
You can set the date and time manually.
Before you start, set the clock mode to
[Manual].
1. In the [Clock] menu, select [Date] or
[Time], then press OK.
2. Use the Navigation buttons to make your
selection.
3. Select [Done], then press OK.
Sleeptimer
You can switch the TV to standby after a
specified time. During the countdown to the
specified time, you can switch off your TV
earlier or reset the sleeptimer.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Sleep timer].
3. Press the Navigation buttons to set the
sleeptimer.
The sleeptimer can be set up to 180 minutes,
in steps of ten minutes. To switch off the
sleeptimer, set it to zero minutes.
4. Press OK to activate the sleeptimer. After
the specified time, the TV switches to
standby.
Child lock
To protect children from unsuitable TV
programs, you can lock the TV or block age
rated programs.
Set or change the child lock code
1. Press .
2. Select [Setup] > [Channel settings] >
[Child lock].
3. Select [Set code] or [Change code].
4. Enter the code with the Numeric
buttons.
Tip: If you forget your code, enter ‗8888‘ to
override any existing codes.
EN
26
Lock or unlock channels
1. In the child lock menu, select [Channel
lock].
2. Select the channel to lock or unlock, then
press OK.
3. If prompted, enter the child lock code
with the Numeric buttons.
4. Restart the TV to activate the lock.
Note:
If you access the channels from the channel
list, you are prompted to enter your lock
code.
Age rating
You can set your TV to display only
programs with age ratings lower than your
child‘s age. This restriction only applies to
digital channels from broadcasters that rate
their programs according to age.
1. Press .
2. Select [Setup] > [Channel settings].
3. Select [Child lock] > [Age ratings lock].
You are prompted to enter the child lock
code.
4. Enter the child lock code with the
Numeric buttons.
5. Select an age rating, then press OK.
All programs above the selected age rating
are blocked.
For information on child lock codes, see Use
more of your TV > Set locks and timers >
Child lock.
Content rating
You can block programs of objectionable
content.
1. Press .
2. Select [Setup] > [Channel settings].
3. Select [Child lock] > [Content ratings
lock].
You are prompted to enter the child lock
code.
4. Enter your code with the Numeric
buttons.
5. Select a content to block, then press OK.
The selected content is blocked.
English
View Scenea
What you can do
With Scenea, you can display a picture as the
wallpaper on your TV. Display the default
picture, or load your own picture as the
wallpaper.
The wallpaper is displayed for 240 minutes,
or for the duration of the sleeptimer.
Switch on
1. Press .
2. Select [Scenea], then press OK.
The default picture is displayed.
Note: The wallpaper is displayed for 240
minutes, or for the duration of the
sleeptimer. For information about the
sleeptimer, see Use more of your TV > Set
locks and timers > Sleeptimer (Page 26).
Load TV wallpaper
You can also load your own picture as the
wallpaper.
Note: When you load a new picture, it
overrides the existing picture.
1. Connect the USB storage device to the
TV.
2. Press .
3. Select [Browse USB], then press OK.
4. Select a picture, then press
OPTIONS.
5. Select [Set as Scenea], then press OK.
6. Press any button to exit Scenea.
EN
27
4 Set up your TV


Picture and sound
Settings assistant

You can select picture and sound settings
with the help of the settings assistant, which
demonstrates the effect of your chosen
setting immediately.
1. While you watch TV, press .
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Continue], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
More picture settings
You can change the settings in the Picture
menu.
1. Press .
2. Select [Setup] > [TV settings] > [Picture],
then press OK.
3. Select a setting to adjust, then press OK.

[Smart picture]: Access predefined
smart picture settings.

[Reset]: Reset to default factory
settings.

[Backlight]: Change the brightness of
the TV to match the lighting condition.

[Contrast]: Change the intensity of the
bright areas, keeping dark areas
unchanged.

[Brightness]: Change the intensity and
details of the dark areas.

[Color]: Change color saturation.

[Tint]: Compensate for color variations.
(Available with NTSC signal only)

[Sharpness]: Change sharpness.

[Noise reduction]: Filter and reduce
noise.
EN
28




[Color temp.]: Change the color
balance.
[Custom color temp]: Customize color
temperature setting. (Available if
[Color temp.] > [Custom] is selected
only)
[Digital Crystal Clear]: Control
advanced settings to fine-tune each
pixel to match surrounding pixels.
Produce a brilliant, high definition image.
- [Advance sharpness]: Enable superior
sharpness, especially on lines and
contours in the picture
- [Dynamic contrast]: Set the level at
which the TV automatically enhances
details in the dark, middle and light
areas of the picture.
- [Dynamic backlight]: Reduce power
consumption by dimming the TV
backlight to match room lighting
conditions.
- [MPEG artifact reduction]: Smoothen
the digital transitions in the picture.
- [Color enhancement]: Change the
colors to be more vivid and improve
the resolution of details in bright colors.
- [Gamma]: Non-linear setting for
picture luminance and contrast.
[PC mode]: When a PC is connected
through HDMI, change the picture
format to [Unscaled] to display
maximum detail.
[Picture format]: Change the picture
format.
[Screen edges]: Change the picture
size.
[Picture shift]: Move the position of the
picture. You cannot select this setting if
the selected picture format is [4:3],
[Auto fill], [Auto zoom], or [Wide
screen].
Select audio format
You can change the settings in the Sound
menu.
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to change, then press OK:

[Smart sound]: Access predefined
smart sound settings.

[Reset]: Reset to factory default
settings.

[Clear sound]: Enhance the sound
quality.

[Bass]: Change the bass level.

[Treble]: Change the treble level.

[Surround]: Switch on spatial sound.

[Headphone volume]: Change
headphone volume.

[Auto volume leveling]: Automatically
reduce sudden volume changes, for
example, when switching channels.

[Balance]: Change the balance of the
left and right speakers.

[Audio out delay]: Automatically sync
the image on the TV to the audio from
a connected home theater.

[Audio out offset]: Change the setting
for audio output delay. You cannot
select this setting if [Audio out delay] is
not switch on.

[Digital output format]: Select audio
output through the digital audio
connector. Select [PCM] to convert
non-PCM audio or [Multichannel] to
output to home theater.

[Digital output level]: Set the sampling
rate for PCM audio.
[Normal] - No loss in intensity or signal
strength; [Low] - certain amount of loss
in intensity or signal strength.
If a Analog TV channel broadcaster streams
audio in several formats, you can select an
audio format.
1. Press .
2. Select [Setup] > [Channel settings] >
[Language].
3. Select a setting, then press OK:

[Mono/Stereo]: If stereo broadcasting is
available, select mono or stereo audio.
4. Press EXIT to exit.
Reset picture and sound
You can restore the default picture and
sound settings, while the channel installation
settings remain the same.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] > [Factory
settings], then press OK.
All TV settings (except for channel settings)
are reset to the default factory settings..
Channel settings
Automatic install
When the TV was switched on for the first
time, a full installation of channels was
performed. To change your language,
country, and reinstall all available TV
channels, you can run this full installation
again.
Start installation
1. Press .
2. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The Country menu is displayed.
3. Select your country, then press OK.
4. Select your network, then press OK:

[Antenna]: Access free-to-air antenna
or digital DVB-T channels.

[Cable]: Access cable or digital DVB-C
channels.
EN
29
English
More sound settings
5. Follow the onscreen instructions to select
other options, if any.
The start menu for channel search is
displayed.
6. Start channel search:

If your channel service provider
instructs you to change settings, select
[Settings], then press OK. Follow the
service provider's instructions to
complete the installation.

Otherwise, select [Start], then press
OK.
7. Once the channel search is complete,
select [Finish], then press OK.
Tip: Press
LIST to see the channel list.
Note: When digital TV channels are found,
the list of installed channels may display
empty channel numbers. You can rename,
reorder, or uninstall these channels.
Install digital channels
If you know the channel frequency of the
channels you want to install, you can search
and store digital channels one-by-one. For
best results, contact the service provider.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Digital: Reception test] >
[Search], then press OK.
4. Press the Numeric buttons to enter the
channel frequency.
5. Select [Search], then press OK.
6. When the channel is found, select [Store],
then press OK.
7. Press EXIT to exit.
Note: If the reception is poor, reposition
your antenna and repeat the procedure.
EN
30
Update channel list
When the TV was switched on for the first
time, a full installation of channels was
performed.
By default, when there are changes to these
channel lists, the TV updates them
automatically. You can also manually update
the channels.
Note: If you are prompted to enter a code,
enter '8888'.
Automatic update
To add or remove digital channels
automatically, leave the TV in standby mode.
The TV updates channels and stores new
channels everyday. Empty channels are
removed from the channel list.
Update channels manually
1. Press .
2. Select [Setup] > [Search for channels] >
[Update channels], then press OK.
3. Follow the onscreen instructions to
update the channels.
Language settings
Menu language
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3. Select a menu language from the list, then
press OK.
Audio language
Select audio language
If the TV channel broadcasts multiple or dual
audio languages, you can select the preferred
audio language.
1. While you watch TV, press
OPTIONS.
2. Select [Audio language] for digital
channels or [Alternate audio] for analog
channel, then press OK.
3. Select from the available languages, then
press OK.

For analog channel, select:
[Main]: Primary audio language, or
[SAP]: Secondary audio languages
You can display closed captions at all times
or only when the TV is muted.
Note:
Not all TV programs, commercials and
features include closed captioning
information.
See your local TV program listings on
channels with closed caption text. The
captioned programs are typically listed with
service marks, such as 'CC' in the TV listings.
1. While you watch TV, press
OPTIONS.
2. Use the Navigation buttons to select
[Closed captions].
3. Select an option, and then press OK.
4. Press
OPTIONS.
5. Select [Caption service].
6. Select the correct type of closed caption,
and then press OK.
Universal access settings
Switch on
Some digital TV broadcasters provide special
audio and subtitle features for people who
are hearing or visually impaired. You can
switch these features on or off.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Universal access] > [On] or [Off]
then press OK.
Audio feedback
When you press a button on the remote
control or TV, you can set the TV to play a
beep.
1. In the [Universal access] menu, press the
Blue button to select [Key beep].
2. Press the Green button to turn on audio
feedback, or press the Red button to turn it
off.
3. Press EXIT to exit.
Other settings
English
Display closed caption
TV demo
You can start a demo to find out more
about the features on this TV.
Note: Demos are not supported on MHEG
channels.
1. While you watch TV, press .
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
4. Press
to exit.
Location
To make sure that the correct TV settings
are applied, you can select where the TV is
used.
Shop or home mode
Select [Home] mode to access all TV
settings. In [Shop] mode, you can access only
limited settings.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Location] > [Home] or [Shop],
then press OK.
4. Restart the TV.
Placement




Before you position the TV, read all
safety precautions. See Get Started >
Important > Safety (Page 6).
Position the TV where light does not
shine directly on the screen.
The ideal viewing distance of this TV is
three times its diagonal screen size. For
example, if the diagonal screen size of
the TV is 81cm / 32", the ideal viewing
distance is ~2.5m / ~92" from the front
of the screen.
While seated, your eyes should be level
with the center of the screen.
EN
31
Stand mount or wall mount
You can apply the best settings for your TV
by selecting wall mount or stand mount.
1. In the [Preferences] menu, select [TV
position].
2. Select [On a TV stand] or [Wall
mounted], then press OK.
Update software
Check version
1. Press .
2. Select [Setup] > [Software settings] >
[Current software info], then press OK.
The version of the current software is
displayed.
Caution: Do not install a lower version of
software than the current version installed
on your product. TP Vision cannot be held
liable or be made responsible for problems
caused by a software downgrade.
Update the software through one of these
methods:

update with USB storage device

update from digital broadcast
Update with USB
Before you update the software, make sure
that you have:

A USB storage device that has at least
256 megabytes of storage space, is FAT
or DOS formatted, and has its write
protection disabled.

Access to a computer with a USB
connector and Internet access.
Note: Do not use a USB hard drive.
1. Connect a USB storage device.
2. Press .
3. Select [Setup] > [Update software], then
press OK.
The update assistant starts.
4. Follow the onscreen instructions to start
the update.
Note: The update assistant directs you to
the Philips support website. See the
installation instructions on the website to
complete the update.
EN
32
Update from digital broadcast
When available, the TV can receive software
updates through digital broadcasts. When a
software update is received, you are
prompted to update the software. We
strongly recommend that you update the
software when prompted.
Follow the onscreen instructions.
Note: To update the software later, select
> [Setup] > [Software settings] > [Local
updates].
Select the file that you downloaded and
follow the onscreen instructions to complete
the update.
Restore default settings
You can reset all picture and sound settings
and reinstall all TV channels on your TV.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the onscreen instructions.

Connect HDMI cables shorter than 5
meters/16.4 feet.
About cables
Cable quality
Overview
Before you connect devices to the TV, check
the available connectors on the device.
Connect the device to the TV with the
highest quality connection available. Good
quality connectors transfer picture and
sound better.
The connections shown in this user manual
are recommendations only. Other solutions
are possible.
Tip: If your device only has composite or
RCA connectors, use a SCART-cinch
adapter to connect the device to a SCART
connector on the TV.
HDMI
An HDMI connection has the best picture
and sound quality.

An HDMI cable combines video and
audio signals. Connect HDMI for
high-definition (HD) TV signals, and to
switch on EasyLink.

An HDMI Audio Return Channel (ARC)
connector allows output of TV audio to
an HDMI ARC compliant device.
Y Pb Pr
Component video (Y Pb Pr) only transmits
video. For sound, also connect to Audio
Left/Right.

The Y Pb Pr connection can handle
high-definition (HD) TV signals.

Match the Y Pb Pr connector colors to
the cable plugs.
EN
33
English
5 Connect your
TV
CVBS
VGA
CVBS only transmits video. For sound, also
connect to Audio Left/Right.

CVBS connections provides standard
picture quality.

On certain models, the video input
socket on your TV is labelled as VIDEO,
AV IN or COMPOSITE.
You can connect VGA to display PC content
on the TV.
VGA only transmits video. For sound, also
connect to AUDIO IN.
EN
34
English
Connect devices
Blu-ray or DVD disc player
Connect the disc player with an HDMI cable to the TV.
Connect the disc player with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
Connect the disc player with a composite cable (CVBS) and an audio L/R cable to the TV.
CVBS
AUDIO L/R
AUDIO L/R
EN
35
TV receiver
Connect the digital TV receiver with an antenna cable to the TV.
Connect the digital TV receiver with an HDMI cable to the TV.
Connect the digital TV receiver with a component video cable (Y Pb Pr) and an audio L/R cable to
the TV.
EN
36
CVBS
English
Connect the digital TV receiver with a composite cable (CVBS) and an audio L/R cable to the TV.
AUDIO L/R
AUDIO L/R
Video recorder
Connect the recorder with an antenna cable to the TV.
Connect the recorder with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.
EN
37
Connect the recorder with a composite cable (CVBS) and an audio L/R cable to the TV.
CVBS
AUDIO L/R
AUDIO L/R
Game console
Connect the game console with an HDMI cable to the TV.
Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the
TV.
EN
38
CVBS
English
Connect the game console with a composite cable (CVBS) and an audio L/R cable to the TV.
AUDIO L/R
AUDIO L/R
Home theater
Connect the home theater with an HDMI cable and an optical cable to the TV.
Connect the home theater with a component video cable (Y Pb Pr) and an audio L/R cable to the
TV.
EN
39
Connect the home theater with a composite cable (CVBS) and an audio L/R cable to the TV.
CVBS
AUDIO L/R
AUDIO L/R
Digital camera
NonPu blish
Connect the digital camera with a USB cable to the TV. (For certain camera models only)
Digital camcorder
Connect the digital camcorder with an HDMI cable to the TV.
EN
40
English
Connect the digital camcorder with a component video cable (Y Pb Pr) and an audio L/R cable to
the TV.
Connect the digital camcorder with a composite cable (CVBS) and an audio L/R cable to the TV.
Connect more devices
USB hard drive
Connect the USB hard drive with a USB cable to the TV.
EN
41
Computer
Connect the computer with an HDMI cable to the TV.
Connect the computer with a DVI-HDMI cable and an audio cable to the TV.
Connect the computer with a VGA cable and an audio cable to the TV.
EN
42
Add new device
Before you can watch a connected device,

Add its icon to the Home menu for
easy access. See Connect your TV >
Connect device (Page 34).

Select from the Source menu.
Note: If you connect an HDMI-CEC
compliant device to the TV through HDMI
connector and switch it on, the device is
automatically added to the Home menu.
1. Connect and switch on the device.
2. Press .
3. Select [Add new device], then press OK.
4. Follow the onscreen instructions.

If you are prompted to select the TV
connection, select the connector that
this device uses.
Rename device
After you add a new device to the Home
menu, you can rename it.
1. Press .
2. Select the device icon from the Home
menu.
3. Press
OPTIONS.
4. Select [Rename], then press OK.
A text input box appears.
5. Press the Numeric buttons and the
Navigation buttons to select and enter the
name.
6. When complete, select [Done], then
press OK.
Select a source
From Home menu
After you add the new device to the Home
menu, you can select the new device icon to
view its contents.
1. Press .
2. Select the device icon from the Home
menu.
3. Press OK to confirm.
From Source menu
You can also press
SOURCE to display
a list of connector names. Select the
connector that connects the device to the
TV.
1. Press
SOURCE.
2. Press the Navigation buttons to select a
connector in the list.
3. Press OK to confirm.
Remove device
If the device is no longer connected to the
TV, you can remove it from the Home
menu.
1. Press .
2. Select the device icon from the Home
menu.
3. Press
OPTIONS.
4. Select [Remove device], then press OK.
5. Select [Remove], then press OK.
The selected device is removed from the
Home menu.
EN
43
English
Watch a connected device
Network and the Internet
Connect
What you can do
Note: Network and Internet access are
available on certain models only.
View Media
If you connect the TV to a home network,
you can play photos, music and videos from
your computer. See Use your TV > View
Media (Page 17).
Smart TV
If you connect the TV to a home network
with an Internet connection, you can browse
Smart TV. Smart TV offers Internet services
and websites tailored to your TV. Play music
and videos, and consult infotainment. See
Use your TV > Browse Smart TV.
Interactive TV
If you connect the TV to the Internet, you
can enjoy the full benefits of Interactive TV.
Systems such as HbbTV, MHP, and DTVi,
use the Internet to communicate with the
TV. The availability of these systems depends
on your local broadcaster.
What you need
Warning: This TV complies with the EMC
directive only when you use a shielded
Cat5 ethernet cable.

An ethernet cable

A computer network that includes:
a) A universal plug-and-play (UPnP)
router and
b) A computer with one of these
operating systems: Microsoft Windows
XP, Microsoft Windows Vista, Mac OS
X, or Linux.

To connect your TV to computers, you
also need media server software that is
set to share files with your TV. See Use
your TV > View media (Page 17).

To connect your TV to the Internet,
you also need a high-speed connection
to the Internet.
EN
44
Internet
TV
Router
PC
You can connect this TV to your home
network through a wired or wireless
connection.

For a wired connection, see Connect
your TV > Network and the Internet
> Wired connection (Page 44).
Internet
TV
Router

PC
For a Wi-Fi ready connection, see
Connect your TV > Network and the
Internet > Wi-Fi ready.
Wired connection
1. Switch on the router and switch on its
DHCP setting.
2. Connect the router with an ethernet cable
to the TV.
3. Press , then select [Setup].
4. Select [Connect to network], then press
OK.
5. Follow the onscreen instructions to install
the network.
6. Wait for the TV to find the network
connection.
7. If you are prompted, agree to the End
User License Agreement.
This section is only for Wi-Fi ready TVs.
With the Philips wireless USB adapter
PTA127, you can connect the TV to your
home network wirelessly.You can enjoy the
best of the Internet from Smart TV services,
and share content between your connected
devices using DLNA.
Note:
The wireless network operates in the same
2.4GHz frequency spectrum as common
household devices, such as Dect phones,
microwave ovens or Bluetooth devices,
which can cause Wi-Fi interference. Move
these devices away from the TV.

To reduce network traffic, switch off
unused network equipment in the
home network.

Reception quality depends on the
location of the wireless router and the
local Internet service provider.

While you play video over your
wireless home network, we
recommend that you use an IEEE
802.11 N router. The connection speed
may differ according to the operating
environment of your wireless home
network.
Start wireless setup
1. Switch on your wireless network router.
2. Connect the Philips USB adapter PTA127
to a USB connector on the TV.
The wireless installation starts automatically.
3. Follow the onscreen instructions.
Tip: Keep the wireless USB adapter
connected to the TV.
WPS - Wi-Fi Protected Setup
1. If your router supports WPS (Wi-Fi
Protected Setup), press the WPS button on
the router.
2. After 2 minutes, select [WPS] on the TV,
then press OK.
The TV connects to your network. This
takes about 2 minutes.
Most new wireless routers have the WPS
system and carry the WPS logo. The WPS
system uses WPS security encryption and
cannot be combined with devices on your
network that use the WEP (Wired
Equivalent Privacy) security encryption.
If you still need the WEP devices in your
network, install with [Scan] > [Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need.
1. To select a specific network router, press
[Scan] on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
2. Select the router you need, then press
OK.

If you are connecting to a WPS router,
select [WPS] on the TV.

If you want to set the PIN code in your
router software to connect, select
[WPS pin] and note down the code.

To enter the encryption key manually,
select [Standard] and enter the key
when prompted.
Set secured connection with WPS
encryption
1. To set the secured connection with a PIN
code, select the [WPS pin] and press OK.
2. Write down the 8-digit PIN code shown
on TV and enter it in the router software on
your PC.
See the router manual on where to enter
the PIN code.
Set secured connection with WPA
encryption
If your router has WPA (Wi-Fi Protected
Access) security, enter the pass phrase with
the remote control.
1. To enter the encryption key manually,
select [Standard] and press OK.
2. To access the onscreen keyboard, select
the text entry field, then press OK.
EN
45
English
Wi-Fi ready
Set secured connection with WEP
encryption
If your router has WEP security, the TV asks
for the WEP encryption key in hexadecimal
numbers.
1. Locate the hexadecimal key in the router
software on your PC and make a note of of
the first key in the WEP keys list.
2. Enter the security key on the TV with the
remote control to connect to the router.
3. If prompted, agree to the End User
License Agreement.
EN
46
General issues
The TV does not switch on:

Disconnect the power cable from the
power outlet. Wait for one minute
then reconnect it.

Make sure that the power cable is
securely connected.
The TV does not respond to remote
control or front controls when switched
on:
The TV requires some time to start up.
During this time, the TV does not respond
to the remote control or front controls. This
is normal behavior.
When you are turning the TV on, off or to
standby, you hear a creaking sound from
the TV chassis:
No action is required. The creaking sound is
due to the normal expansion and
contraction of the TV as it cools and warms
up. This does not affect performance.
When the TV is in standby, a startup splash
screen is displayed, then returns to standby
mode:
This is normal behavior. When the TV is
disconnected and reconnected to the power
supply, the startup screen is displayed at the
next startup.
To switch on the TV from standby, press
on the remote control or press any key on
the TV.
The standby light on the TV blinks red:
Disconnect the power cable from the power
outlet. Wait until the TV cools down before
you reconnect the power cable. If the
blinking reoccurs, contact Philips Consumer
Care.
You forgot the 4-digit code to unlock the
channel blocking feature (child lock):
Enter ‗8888‘.
The TV or Smart TV* menu is in the wrong
language:
Change the menu to your preferred
language.
For more information, see Set up your TV >
Language settings > Menu language (Page
30).
* Available on PFL4xx7 only.
Subtitles are not visible when you play a
movie file from a USB storage device:
Subtitle files that are not hard-coded into a
video file (for example, *.srt, *.sub, *.idx) are
not supported.
You want to upgrade your TV software:
Visit www.philips.com/support and
download the latest software package for
your TV. Software installation instructions
and release notes indicating what's been
updated are also available at the site. Full
instructions on how to upgrade your TV
software are also available at Setup your TV
> Update software.
Channel issues
You want to install TV channels
See Setup your TV > Channel settings
(Page 29) for instructions on installing analog
or digital channels.
No digital channels were found during the
installation:
See the technical specifications to make sure
that your TV supports SATVD-T or
SBTVD-T in your country.

Make sure that all cables are properly
connected and that the correct
network is selected.
Previously installed channels do not appear
in the channel list:
Make sure that the correct channel list is
selected.
You want to rearrange or reorder the
channel list:
After channels are installed, they appear in
the channel list. For information about
managing channel lists, including rearranging
channels, see Watch TV > Manage channel
lists.
EN
47
English
6 Troubleshooting
Picture issues
The TV is on, but there is no picture or the
picture is distorted:

Make sure that the antenna is properly
connected to the TV.

Make sure that the correct device is
selected as the display source.

Make sure that the external device or
source is properly connected.
There is sound but no picture:
Make sure that the picture settings are set
correctly.
There is poor TV reception from an
antenna connection:

Make sure that the antenna is properly
connected to the TV.

Loud speakers, unearthed audio devices,
neon lights, high buildings, and other
large objects can influence reception
quality. If possible, try to improve the
reception quality by changing the
antenna direction or moving devices
away from the TV.

If reception on only one channel is
poor, fine-tune this channel.
There is poor picture quality from
connected devices:

Make sure that the devices are
connected properly.

Make sure that the picture settings are
set correctly.
The TV did not save your picture settings:
Make sure that the TV location is set to
Home. You can change and save settings in
this mode.
The picture does not fit the screen; it is
too big or too small:
Change the different picture format.
The picture format keeps changing with
different channels:
Instead of the picture format [Auto zoom],
select a different picture format.
The picture position is incorrect:
Picture signals from some devices may not fit
the screen correctly. Check the signal output
of the device.
EN
48
The picture from broadcasts is scrambled:
You may need a Conditional Access Module
to access content. Check with your service
operator.
An "e-sticker" banner displaying
information appears on the TV display:
The TV is in [Shop] mode. To remove the
e-sticker, set the TV to [Home] mode, then
restart the TV. See Setup your TV > Other
settings > Location (Page 31).
The computer display on the TV is not
stable:

Make sure that your PC uses the
supported resolution and refresh rate.
See Product specifications > Display
resolutions.

Change the TV picture format to
[Unscaled].
Sound issues
There is picture but no sound from the TV:
If no audio signal is detected, the TV
automatically switches the audio output
off — this does not indicate malfunction.

Make sure that all cables are properly
connected.

Make sure that the volume is not
muted or set to zero.

Make sure that the TV speakers setting
is selected. Press
ADJUST, select
[Speakers], and then select TV.

Make sure that the TV audio output is
connected to the audio input on the
HDMI-CEC enabled or EasyLink
compliant home theater device. Sound
should be heard from the home theater
speakers.

Some devices may require you to
manually enable HDMI audio output. If
HDMI audio is already enabled, but you
still do not hear audio, try changing the
digital audio format of the device to
PCM ('Pulse Code Modulation'). Refer
to the documentation accompanying
your device for instructions.
Connection issues
There are problems with HDMI devices:

Note that HDCP (High-bandwidth
Digital Content Protection) support can
delay the time taken for a TV to display
content from an HDMI device.

If the TV does not recognize the HDMI
device and no picture is displayed,
switch the source from one device to
another and back again.

If there are intermittent sound
disruptions, make sure that output
settings from the HDMI device are
correct.

If you use an HDMI-to-DVI adapter or
HDMI to DVI cable, make sure that an
additional audio cable is connected to
AUDIO L/R or AUDIO IN (mini-jack
only).
You cannot use EasyLink features:
Make sure that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMI-CEC
compatible.
If an HDMI-CEC compliant audio device is
connected to the TV and the TV does not
display any mute or volume icon when the
volume is muted, increased or decreased:
When a HDMI-CEC audio device is
connected this behavior is normal.
USB device content is not displayed:

Make sure that the USB storage device
is set to Mass Storage Class compliant,
as described in the storage device's
documentation.

Make sure that the USB storage device
is compatible with the TV.

Make sure that the audio and picture
file formats are supported by the TV.
Audio and picture files on your USB
storage device do not play or display
smoothly:
The transfer performance of the USB
storage device may limit the data transfer
rate to the TV which causes poor playback.
Network issues
This section is applicable to certain models
only.
You want to establish a wireless
connection between your TV and home
network:
Refer to Connect your TV > Network and
the Internet > Wi-Fi ready for instructions
on how to connect your TV wirelessly to
your home network.
Smart TV does not work:
(Smart TV is available on PFL4xx7 only.)
Check that the router is properly connected
to the TV, and that your router has open
access to the Internet. If your router has a
firewall or security settings, make sure that it
allows Smart TV data to pass through -check your router documentation for details.
Open internet access via Smart TV is slow

Try to improve the signal quality
between the router and TV if you are
accessing the Internet wirelessly Refer
to the router's documentation for
details.

Always use a fast broadband wherever
possible.

Update your TV with the latest
software to ensure browsing speed is
optimal.
EN
49
English
There is picture but sound quality is poor:
Make sure that the sound settings are
correctly set.
There is picture but sound comes from
one speaker only:
Make sure that sound balance is set to the
center.
Browse Network is slow.
If you are accessing your PC wirelessly, refer
to the router's documentation to improve
the signal quality between the router and
TV.
Wireless network is distorted or not
found:

Make sure that the wireless network is
not disturbed by microwave ovens,
DECT phones, or other neighboring
Wi-Fi devices.

If the wireless network is not working,
try a wired network connection.

Make sure that the firewalls in your
network allow access to the TV
wireless connection.
Contact Philips
Warning: Do not attempt to repair the TV
yourself. This may cause severe injury,
irreparable damage to your TV or void
your warranty.
If are not able to resolve your problem, refer
to the frequently asked questions (FAQs) for
this TV at www.philips.com/support. You
can also consult and contribute to the Philips
TV community at
www.supportforum.philips.com.
If you wish to speak with or email a Philips
representative, contact the Philips Consumer
Care in your country. You can find the
contact details in the leaflet accompanying
this TV or at www.philips.com/support.
Take note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
EN
50
Power and reception
Product specifications are subject to change
without notice.
Power

Mains power:
For Argentina region: AC 220-240 V~,
50-60 Hz
For Brazil region: AC 110-240 V~,
50-60 Hz

Standby power consumption:
For PFL30x7, PFL35x7, PFL40x7
22" to 24": < 0.5 W
32" to 47": < 0.3 W
For PFL37x7, PFL47x7
32" to 46": < 1 W

Ambient temperature: 5 to 35 degree
Celsius

For power consumption, see the
product specifications at
www.philips.com/support.
Reception

Antenna input: 75 ohm coaxial (F-type)

TV system: PAL M, PAL N, NTSC M,
SATVD-T, SBTVD-T

Video playback: NTSC, PAL
Display and sound
Picture / Display

Display type: edge LCD/LED backlight

Diagonal size:
- 56 cm / 22 inch
- 61 cm / 24 inch
- 81 cm / 32 inch
- 99 cm / 39 inch
- 107 cm / 42 inch
- 117 cm / 46 inch
- 119 cm / 47 inch

Aspect ratio: 16:9 (widescreen)

Panel resolution:
For HD models: 1366 X 768 p
For FHD models: 1920 X 1080 p

Picture enhancement:
Digital Crystal Clear

Perfect Motion Rate (PMR): 120 Hz
Sound

Output power (RMS): @ 10% THD
- For 22" to 24": 10 W
- For 32" to 47": 20 W

Incredible Surround

Clear Sound

Mono / Stereo
EN
51
English
7 Product
specifications
Display resolutions
Video formats
(Resolution - refresh rate)
Computer formats - HDMI
(Resolution - refresh rate)
480i - 60 Hz
480p - 60 Hz
576i - 50 Hz
576p - 50 Hz
720p - 50Hz, 60 Hz
1080i - 50Hz, 60 Hz
1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 720 - 60 Hz
1280 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
For Full HD TV only:
1680 x 1050 - 60 Hz
1920 x 1080 - 60 Hz
Computer formats - VGA
(Resolution - refresh rate)
640 x 480 - 60 Hz
800 x 600 - 60 Hz
1024 x 768 - 60 Hz
1280 x 1024 - 60 Hz
1360 x 768 - 60 Hz
For Full HD TV only:
1920 x 1080 - 60 Hz
Supported audio/video files
Multimedia file names must not exceed 128 characters.
EN
52
Multimedia
Supported multimedia connections

USB: Connect only USB devices which
consumes 500mA of power or less.
- NTFS, FAT 16 (Read only)
- FAT 32

Ethernet LAN RJ-45 (Available on
certain models only)
Supported image files

JPEG (*.jpg)
Supported audio/video files
Multimedia file names must not exceed 128 characters.
File Extensions
Container
Video codec
XviD
.mp4
.avi
.flv
.mp3
AVI
FLV
MP3
Maximum resolution Max. Frame Rate (fps) Max. Bit Rate (Mbps)
1920x1080
30
40 Mbps
Audio codec
USB
DLNA
YES
YES
YES
YES
YES
YES
YES
YES
MPEG1
768x576
30
1.8 Mbps
MPEG2 MP@HL
1920x1080
30
40 Mbps
H.264 BP/MP/HP
LV 4.0
1920x1080
30
40 Mbps
MPEG4 SP@L 3.0/
ASP@HL 4.0
1920x1080
30
40 Mbps
YES
YES
Motion JPEG
1280x720
30
30 Mbps
YES
YES
wav:PCM/ADPCM/A-law PCM/u-law
PCM, MPEG1 Layer 1/2, MP3, MPEG2
AAC-LC, MPEG4 AAC-LC/HE-AAC,
AC3, WMAv8
Sorenson
352x288
30
40 Mbps
H.264 BP/MP/HP
LV 4.0
1920x1080
30
40 Mbps
NA
NA
NA
32/40/48/56/64/80/96/
112/128/160/192/224/
256/320 kbits/s
ACC-LC/HE-AAC
.wav
MKV
NA
NA
NA
16bit PCM(big/little
endian)
24bit PCM(big endian)
.aac
.mp4
.m4a
AAC
NA
NA
NA
16-576 kbits/s
Supported DLNA-compliant media server
software
(DLNA is available on certain models only)

Windows Media Player (for Microsoft
Windows)

Twonky Media (for Microsoft Windows
and Mac OS X)

Sony Vaio Media Server (for Microsoft
Windows)

TVersity (for Microsoft Windows)

Nero MediaHome

DiXiM (for Microsoft Windows XP)

Macrovision Network Media Server (for
Microsoft Windows)

Fuppes (for Linux)

uShare (for Linux)
YES
YES
YES
YES
MP3
YES
YES
PCM/ADPCM/A-law PCM/
u-law PCM
YES
YES
YES
YES
MPEG1 Layer1/2, MP3, MPEG2 AAC-LC,
MPEG4 AAC-LC/HE-AAC
Connectivity
Rear

NETWORK: Ethernet LAN RJ-45
(available on certain models only)

Service port: SERV.U

AUDIO IN: DVI/VGA (stereo 3.5mm
mini-jack)

VGA: PC input

Component and Audio: Y Pb Pr, Audio
L/R

SPDIF OUT: Cinch (Digital Audio Out)

ANTENNA IN 1 (Air): 75 ohm coaxial

ANTENNA IN 2 (Cable): 75 ohm
coaxial

ARC HDMI 3
Side

Headphones: stereo 3.5mm mini-jack

Composite and Audio: CVBS, Audio
L/R

USB 1 / USB 2

HDMI 1, HDMI 2
HDMI features

Audio Return Channel (HDMI 3 only)
EN
53
Supported TV mounts
You can mount your TV on the wall with a
compatible TV mount (sold separately).
Select the type of TV mount for your TV
screen size:
56 cm / 22 inches:
75mm x 75mm, M4
61 cm / 24 inches:
75mm x 75mm, M4
81 cm / 32 inches:
- For PFL3017D, PFL35x7D, PFL40x7G,
PFL47x7G: 200mm x 200mm, M6
- For PFL37x7D, PFL40x7D: 200mm x
100mm, M4
99 cm / 39 inches:
- For PFL47x7G: 200mm x 200mm, M6
107 cm / 42 inches:
- For PFL30x7D, PFL35x7D: 400mm x
200mm, M6
- For PFL37x7D, PFL40x7G: 400mm x
400mm, M6
117 cm / 46 inches:
- For PFL47x7G: 400mm x 400mm, M6
119 cm / 47 inches:
- For PFL30x7D: 200mm x 200mm, M6
- For PFL40x7G: 400mm x 400mm, M6
EN
54
Warning: Follow all instructions provided
with the TV mount. TP Vision Netherlands
B.V. bears no responsibility for improper
TV mounting that results in accident, injury
or damage.
To prevent damage to cables and
connectors, leave a gap of at least 5.5 cm /
2.2 inches from the back of the TV.
For PFL30x7D - 22 to 24 inch TVs:
Before you mount the TV on the wall, find
the correct length of the screw.
To find the length of the screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
9 mm
10 mm
Before you mount the TV on the wall, find
the correct length of the screw.
To find the length of the screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
For PFL40x7G - 32 inch TVs:
Before you mount the TV on the wall, find
the correct length of the screw.
To find the length of the screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
For PFL40x7G - 42 inch TVs:
For PFL37x7D - 32 to 46 inch TVs:
For PFL40x7D - 32 inch TVs:
Before you mount the TV on the wall, find
the correct length of the screw.
To find the length of the screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
Before you mount the TV on the wall, find
the correct length of the screw.
To find the length of the screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
EN
55
English
For PFL30x7D, PFL35x7D - 32 to 47 inch
TVs:
For PFL40x7G - 47 inch TVs:
Before you mount the TV on the wall, find
the correct length of the screw.
To find the length of the screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
15 mm
For PFL47x7G - 32 to 46 inch TVs:
Before you mount the TV on the wall, find
the correct length of the screw.
To find the length of the screw, add the
thickness of your wall mount to the screw
length, as shown in the graphic.
20 mm
EN
56
Help version
UMv 123007782284 - 20120704
8 Index
contact information, on Internet • 12
A
content rating • 26
age rating • 26
D
amplifier, select output • 24
demo • 31
audio language • 30
devices • 35
audio sync • 25
devices, add • 43
C
devices, watch • 43
channels • 14
channels, favorites • 14
channels, install (automatic) • 29
channels, install (digital) • 30
channels, reinstall • 32
channels, rename • 14
channels, switch • 14
channels, update • 30
English
contact Philips • 12
digital camcorder • 40
digital camera • 40
digital channels • 30
disc player, connect • 35
display • 51
display resolution • 52
DLNA • 17
DTVi • 19
child lock • 26
E
clock • 25
EasyLink • 23
closed captions, display • 31
EasyLink, controls • 23
computer, play files • 17
EasyLink, enable • 23
connect devices • 33
EasyLink, features • 23
connect, digital camcorder • 40
EasyLink, onscreen control • 5
connect, digital camera • 40
EasyLink, remote control buttons • 23
connect, disc player • 35
EasyLink, TV speakers • 24
connect, external hard disk • 41
energy efficient, settings • 10
connect, game console • 38
EPG, Electronic Programme Guide • 3
connect, home network • 44
external hard disk • 41
connect, home theater system • 39
connect, PC • 42
F
connect, recorder • 37
favorite channels, list • 14
connect, TV receiver • 36
connect, USB • 17
G
connected device, add • 43
game console • 38
connected device, remove • 43
games • 22
connected device, rename • 43
connectors • 33
EN
57
picture settings, reset • 29
H
HbbTV • 19
HDMI • 33
HDMI ARC • 33
help, onscreen • 12
Help, version • 56
Pixel Plus link • 25
placement, stand or wall mount • 31
position • 31
power • 51
product support • 12
high-definition (HD), content • 3
R
home mode • 31
rear controls • 4
home network • 44
recorder, connect • 37
home theater system, connect • 39
reinstall • 32
I
remote control • 5
install channels, automatic • 29
Interactive TV • 19
remove, connected device • 43
rename, connected device • 43
S
K
kensington lock • 7
safety • 6
Scenea, enable • 27
L
Scenea, load wallpaper • 27
language, menu • 30
screen care • 7
location, home or shop • 31
screen saver • 27
sensors • 4
M
settings, assistant • 28
media server program • 17
settings, audio format • 29
mode, home or shop • 31
settings, game • 22
Multimedia Home Platform (MHP) • 19
settings, picture • 28
multimedia, play files • 17
settings, sound • 29
multimedia, supported formats • 52
shop mode • 31
sleeptimer • 26
N
smart settings • 15
network, connect • 44
Smart TV • 3
P
Smart TV, applications • 19
pause TV • 21
PC, connect • 42
PC, display resolutions • 52
picture format • 16
picture settings • 28
EN
58
Smart TV, browse • 18
Smart TV, network • 44
software, check version • 32
software, digital update • 32
software, USB • 32
sound settings, reset • 29
English
standby • 13
sustainability • 10
switch TV on, off • 13
T
trademarks and copyrights • 9
TV receiver, connect • 36
TV speakers, mute • 13
U
universal access, enable • 31
V
VGA • 34
volume • 13
W
wall mount • 54
wallpaper • 27
wireless, dongle • 45
Y
YouTube • 19
YPbPr, component video • 33
EN
59
Lista de Postos Autorizados TP Vision - Brasil
A lista completa e atualizada dos nossos
postos autorizados está disponível em
nosso site www.philips.com.br.
Entre em contato conosco
para identificar o Posto
Autorizado mais próximo de
sua residência:
Grande São Paulo
2938 0245
Demais Regiões do País:
0800 701 0245
Fale conosco pelo chat
www.philips.com.br
CERTIFICADO DE GARANTIA NO BRASIL
Este aparelho é garantido pela TP Vision Indústria Eletrônica Ltda. por um período superior
ao estabelecido por lei. Porém, para que a garantia tenha validade é imprescindível que, além
deste certificado, seja apresentada a nota fiscal de compra do produto.
A TP Vision Indústria Eletrônica Ltda. assegura ao proprietário consumidor
deste aparelho a garantia de 365 dias (90 dias obrigatórios mais 275
adicionais) contados a partir da data de entrega do produto, conforme
expresso na nota fiscal de compra, que passa a fazer parte deste certificado.
Esta garantia perderá sua validade se:
• O defeito apresentado for ocasionado pelo uso indevido ou em desacordo com o seu
manual de instruções
• O produto for alterado, violado ou consertado por pessoa não autorizada pela TP Vision.
• O produto for ligado a fonte de energia (rede elétrica, pilhas, bateria, etc.) de
características diferentes das recomendadas no manual de instruções e/ou no produto.
• O número de série que identifica o produto estiver de alguma forma adulterado ou
rasurado.
Estão excluídos desta garantia defeitos decorrentes do descumprimento do manual de
instruções do produto, de casos fortuitos ou de força maior bem como aqueles causados
por agentes da natureza e acidentes. Excluem-se igualmente desta garantia defeitos
decorrentes do uso dos produtos em serviços não domésticos/residendais regulares ou em
desacordo com o uso recomendado.
ESTÃO EXCLUÍDAS DA GARANTIA ADICIONAL AS PILHAS OU
BATERIAS FORNECIDAS JUNTO COM O CONTROLE REMOTO.
Nos municípios onde não exista assistência técnica autorizada TP Vision, as despesas de
transporte do aparelho e/ou do técnico autorizado correm por conta do consumidor
requerente do serviço. A garantia não será válida se o produto necessitar de modificações
ou adaptações para habilitá-lo a operar em qualquer outro país que não aquele para o qual
foi designado, fabricado, aprovado e/ou autorizado, ou ter sofrido qualquer dano decorrente
deste tipo de modificação.
TP Vision
No Brasil, para informações adicionais sobre o produto, entre em contato com o CIC
Centro de Informações ao Consumidor através dos telefones (11) 2938-0245 (Grande São
Paulo) e 0800-701-0245 (demais regiões e estados). Horário de atendimento: de segunda a
sexta-feira, das 8h às 20h e sábados das 8h às 13h. Visite também nossa página de suporte
ao consumidor www.philips.com.br/suporte, onde está disponível a lista completa e mais
atualizada das assistências técnicas autorizadas TP Vision.
Para atendimento fora do Brasil, contate a TP Vision local ou: TP Vision Netherlands B.V.
High Tech Campus 5, 5656 AE Eindhoven, The Netherlands
© 2012 TP Vision Netherlands B.V.
All rights reserved.