Philips Car infotainment system CID2280

Register your product and get support at
www.philips.com/welcome
EN
User manual
=+&1 Ⴌ߀൱Ҭ
3
34
CID2280
1 Important
4
Safety
Notice
4
4
2 Your in-car entertainment system
Introduction
What’s in the box
Overview of the main unit
3 Get started
Install the car audio
Turn on
Set date and time
4 Use navigation system
Insert map card
Use map
Upgrade the map
5 Listen to radio
Tune to a radio station
Store radio stations in memory
Tune to a preset station
6
6
6
7
8
8
11
11
12
12
12
13
13
13
14
14
7 Play with Bluetooth device
19
Pair Bluetooth devices
Make a call
Receive call
Listen to music from Bluetooth device
Adjust Bluetooth settings
8 Adjust sound
21
Adjust volume
Mute
Select preset equalizer
Adjust fader/balance
Set Dynamic Bass Boost (DBB)
21
21
21
22
22
9 Adjust settings
23
Display system setup menu
Adjust general settings
Adjust sound settings
Adjust video settings
Adjust Bluetooth settings
Adjust language settings
Adjust volume settings
Adjust DVD rating
23
23
24
25
25
26
27
27
10 Others
6 Play
Load discs
Connect USB device
Insert SD/MMC card
Play/Pause
Skip/search
Direct select
Repeat one/all
Repeat a section
Random play
Select audio language
Select audio mode
Select subtitle language
Rotate pictures
Zoom
Select slide show duration
15
15
15
15
16
16
16
17
17
17
18
18
18
18
18
18
19
19
20
20
20
28
Listen to other devices
Reset
Replace fuse
28
28
28
11 Product information
29
General
Disc player
Radio
LCD
Bluetooth
29
29
29
29
30
12 Troubleshooting
31
About Bluetooth device
31
13 Glossary
32
EN
3
English
Contents
1 Important
Safety
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
Read and understand all instructions
before you use the apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous radiation
exposure or other unsafe operation.
This unit is designed for negative ground
(earth) 12 V DC operation only.
To reduce the risk of traffic accident, do
no watch video during driving.
To ensure safe driving, adjust the volume
to a safe and comfortable level.
Improper fuses can cause damage or
fire. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuit, do not expose the
apparatus to rain or water.
Never insert objects into the ventilation
slots or other openings on the apparatus.
Never place any objects other than discs
into the disc tray/slot.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the screen! Never
touch, push, rub or strike the screen with
any object.
Never use solvents such as benzene,
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Clean the apparatus with soft, damp
cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the apparatus.
The apparatus shall not be exposed to
dripping or splashing.
EN
•
Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
Notice
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
“DivX, DivX” Certified, and associated logos
are trademarks of DivX, Inc. and are used
under license.
Offical DivX® Certified product. Plays all
versions of DivX® video (including DivX® 6)
with standard playback of DivX® media files.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Philips
is under license.
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Other trademarks and trade names are those
of their respective owners.
This product complies with the radio
interference requirements of the European
Community.
Recycling
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
EN
5
English
This apparatus includes this label:
2 Your in-car
entertainment
system
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With the car entertainment system, you can
• Quickly found routine through the
navigation system
And you can also enjoy:
• Audio/video/JPEG pictures from
• DVD, VCD or CD
• USB devices
• SD/SDHC/MMC cards
• External devices
• FM or AM (MW) radio
• Audio from Bluetooth-enabled devices
Besides, you can make/receive phone calls
with Bluetooth-enabled devices.
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
What’s in the box
Check and identify the contents of your package:
a Main unit
b Trim plate
c Mounting
bracket x 2
d ISO cable
e Control wire
f AV out cable
g I/O out cable
h USB cable
i AV in cable
j GPS antenna
k Bolt
l Rubber cushion
m Screw x 8
n Clean cloth
o Printing material
6
EN
a
English
Overview of the main unit
j
b
c
d
e
f
g
h
i
a Built-in microphone
b
•
Eject disc.
c SRC
• Select source.
• Turn the screen on or off.
d VOL/ /MUTE
• Adjust volume.
• Turn the unit on or off.
• Turn mute on or off.
e RESET
• Reset when it hangs up.
f Navigation map card slot
g SD card slot
h Audio/video in socket (AV IN)
i USB socket (
)
j Disc slot
EN
7
3 Get started
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Note on the power supply lead (yellow)
• When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value
of all the connected devices.
Notes on speaker connection
• Never connect speaker wires to the
metal body or chassis of the car.
• Never connect speaker wires with stripes
to one another.
Mount in the dashboard
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
Note
• Check wire connection before you mount the
unit into a car.
• If preset radio stations are lost when the
ignition key is turned OFF and then back ON,
reconnect the red leads crosswise to the
yellow ones.
1
If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
• If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
might lose its memory.
• If the car battery is not disconnected,
to avoid short-circuit, make sure that
bare wires do not touch each other.
2
Take out the original car audio and keep
the screws.
3
Connect wires (see “Connect wires” section).
• This unit is designed for negative ground
(earth) 12 V DC operation only.
• Always install this unit in the car dashboard.
•
•
•
•
•
•
•
8
Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid short-circuit: before you connect,
ensure that the ignition is off.
Ensure that you connect the yellow and red
power supply leads after all other leads are
connected.
Ensure that all loose leads are insulated with
electrical tape.
Ensure that the leads do not get caught under
screws orin parts that will move (e.g. seat rail).
Ensure that all ground (earth) leads are run to
a common ground (earth) point.
Use only the supplied mounting hardware for a
safe and secure installation.
Improper fuses can cause damage or fire.
When you need to change the fuse, consult a
professional.
EN
Mount the brackets onto the unit with
the screws.
7
Slide the unit into the dashboard until a
click sound is heard.
5
Take off the two screws on the top side
of the unit.
8
Fix the unit onto the dashboard with screws.
9
Mount on the trim plate.
6
English
4
Mount on the supplied bolt and rubber
cushion, if necessary.
10 Reconnect the negative terminal of the
car battery.
EN
9
Connect wires
Caution
• Ensure that all loose leads are insulated with
electrical tape.
Pink
Yellow
Green
Yellow
Blue
Orange/
white
Yellow
Connect it to the metal
body or chassis of the car
b
c
GPS antenna
White/
brown
Yellow
Yellow
Optional accessory
Amplifier
Red
Connect to the positive (+) terminal
of reverse driving lamp
White
Remark:
c Connect the AV IN cable to the AV IN socket on front panel.
Red
Brown/
black
a
Red
AV system
White
AUX
White
Green/white
Gearbox
Yellow
AV system
White
AUX
Rear display
Rear display
Radio antenna
EN
10
Check the car’s wiring carefully, then do
the other connections:
1
Blue/white
Red
Yellow
Brown
Turn on
Caution
English
Set date and time
1 Tap .
» The main menu is displayed.
• Risk of road accidents! Never watch video or
adjust settings while you drive.
1
Press to turn on the unit.
» The available OSD (On-Screen
Display) languages are displayed.
2
3
2
Tap a language.
» The OSD language is changed to the
selected language immediately.
•
To turn off the unit, press
Tap [Time].
» The date/time setup menu is displayed.
for 3 seconds.
Turn the screen on/off
1
Tap [Settings].
Press SRC for over 2 seconds
» The screen is turned off.
Set date
1
2
Tap [Date].
3
Tap
Tap the displayed date information.
» A submenu is displayed.
» To turn on the screen, press SRC.
Tip
• To adjust screen brightness, see “Adjust
settings” section.
or
to set year, month and day.
Set time mode
1
Tap [Time mode].
EN
11
2
Tap [12H] or[24H] to select clock mode.
Set time
1
2
Tap [Time].
4 Use navigation
system
Tap the displayed time.
» A submenu is displayed.
Insert map card
Note
• Navigation map card is not included in the
packaging of the car entertainment system.
3
Tap
or
to set hour and minute.
1
2
Open the card door.
3
Close the card door.
Insert the map card into the map card slot.
Tip
• When date/time is set, tap
to return to
main menu.
Use map
Note
• You might need to upgrade the navigation map
(sold separately) before using it. See “Upgrade
the map” section
12
EN
1
Tap the upper left corner to display main
menu.
2
Tap [Navigation].
» The navigation menu is displayed in a
few seconds.
Refer to the user manual of the navigation
map to operate the navigation tool.
Upgrade the map
1 Exit navigation system.
2 Open the card cover. press on the map
5 Listen to radio
English
3
Tune to a radio station
1 Tap to display home menu.
2 Tap [Radio].
» Band and frequency information is
displayed.
card until you hear a click sound.
3
Pull out the map card and bring it to the
authorized service center for upgrade.
4
Insert the upgraded map card back into
the card slot.
5
Turn on the car audio.
» The map upgrades in a few minutes.
3
Tap on FM or AM to select band:
• FM band options: FM1, FM2, FM3
• AM band options: AM1, AM2
4
Briefly tap or to tune to a radio
station by step.
• Tap or for over 1 seconds to
tune to a radio station automatically.
Tune by frequency
1
2
Tap FM or AM to select band.
3
Tap [Goto].
Tap
.
EN
13
4
Tap the numbers to enter frequency.
•
•
5
Tap to confirm.
» The radio station is broadcast.
Before you start to search for radio stations,
you can select radio range.
Tap
Tap
.
Tap [Save].
Tap one of the channels 01 to 06 to save
the select band.
Tap to clear the last entered
number.
Tap to clear all the entered
numbers.
Select radio range
1
2
2
3
4
.
Tap [Radio range] to toggle tuner
sensitivity from normal to high sensitivity.
• [Distance]: Only stations with strong
signals can be broadcast.
• [Local]: Stations with strong and
weak signals can be broadcast.
Store stations automatically
You can search for a station with intro search,
which broadcasts a 10-second preview of each
detected radio station.
1
2
3
Select band.
Tap
.
Tap [Search].
» Auto search starts. The six strongest
stations of the selected band are saved
in preset channels 1-6 automatically.
Tune to a preset station
1 Tap [Radio].
2 Select band.
3 Tap one of the preset channels (01 to 06)
to select a preset station.
Store radio stations in
memory
You can store up to 6 stations in each band.
Store stations manually
1
Tune to the station.
14
EN
6 Play
English
Connect USB device
Note
Load discs
• Ensure that the device contains playable
content.
You can play video, audio or images stored on
the following discs:
• DVD video, DVD-R, DVD-RW
• VCD
• Audio CD, CD-R, CD-RW
1
2
Open the USB door.
Insert the USB device to the USB socket.
» Play starts automatically.
Note
• Ensure that the disc contains playable content.
1
Insert the disc into the disc slot with label
side facing up.
» Play starts automatically.
Note
• To remove the USB device, switch to disc,
» To remove the disc, press the
radio or other source first.
button.
» When the disc is ejected, the unit
switches to the previous source,
if connected. Otherwise, the
unit switches to [Radio] mode
automatically.
Insert SD/MMC card
Note
You can play DVD discs with the following
region codes:
• Ensure that the device contains playable
DVD region code
• The unit supports SDHC card.
content.
Country
China
1
2
Open the USB/SD card door.
Insert the SD/MMC card into the SD/
MMC card slot.
» Play starts automatically.
EN
15
Skip/search
1 Tap to return to playlist menu.
2 Tap one of below icons to select folder/file:
•
•
•
3
4
Remove the SD/MMC card
1
2
3
Switch to another source.
Press the card until you hear a click sound.
» The card is now disengaged.
: To display all available audio
folders/track.
: To display all available picture
folders/files.
: To display all available video
folders/files
Tap
or
Tap
to start play.
to select a folder/track.
Direct select
1 Tap anywhere except for the upper left
corner to display menu on the screen, if
necessary.
Remove the SD or MMC card.
Play/Pause
1 Once a disc, USB or SD/MMC card is
inserted, play starts automatically.
2
2
16
To pause, tap .
• To resume play, tap
EN
again.
Tap .
» The search screen is displayed.
Tap the numbers to enter chapter/file
number, then tap .
• To clear the previous input, tap .
• To clear all input, tap .
For audio files:
1
Repeat one/all
During playing, you can select different repeat
mode.
For DVD/VCD movie disc:
1
2
3
Tap anywhere except for the upper left
corner to display menu on the screen, if
necessary.
Tap
For VCD karaoke:
1
Repeat a section
You can repeat a specific section of video file
(repeat A-B).
1
During play, tap anywhere except for the
upper left corner to display menu on the
screen, if necessary.
2
Tap
to display the 2nd menu, if
necessary.
3
Tap
repeatedly to mark:
• [Repeat A-]: the start of the section
to repeat.
• [Repeat A-B]: the end of the section
to repeat.
• The selected section plays
repeatedly.
4
To exit A-B repeat mode, tap
repeatedly until [Repeat A-B off] is
displayed.
to display the 2nd menu.
Tap to select:
• [Repeat chapter]: play the current
chapter repeatedly.
• [Repeat title]: play all chapters in the
title repeatedly.
• [Repeat all]: play the disc repeatedly.
• [Repeat off]: cancel repeat play.
Tap to select:
• [ -1]: play the current track
repeatedly.
• [ -Folder]: play all the tracks in the
current folder repeatedly.
: play all audio files repeatedly.
•
• [ -OFF]: cancel repeat play.
Random play
You can play audio tracks/files in random order.
1
During play, tap
repeatedly to turn
random play on or off.
•
is highlighted : start random play.
turns gray: cancel random play.
•
Tap to select:
• [Repeat one]: play the current track
repeatedly.
• [Repeat all]: play all tracks
repeatedly.
• [Repeat off]: cancel repeat play.
EN
17
English
3
Select audio language
For video discs that contain two or more audio
channels.
1
During play, tap anywhere except for the
upper left corner to display menu on the
screen, if necessary.
2
3
Tap
Rotate pictures
1 When you view pictures, tap anywhere
except for the upper left corner to display
menu on the screen, if necessary.
to display the 2nd menu.
Tap
repeatedly.
» The audio channel information is
displayed on the upper line of the
screen.
Select audio mode
When you play VCDs, you can select an audio
mode (R/L/Stereo).
1
During play, tap anywhere except for the
upper left corner to display menu on the
screen.
2
Tap
repeatedly until the audio mode
is selected.
2
Tap
repeatedly to rotate the picture.
Zoom
You can zoom in pictures for a close view.
1
During view pictures, tap anywhere
except for the upper left corner to display
menu on the screen, if necessary.
2
Tap
3
Tap , , or to pan through the
enlarged picture.
repeatedly to zoom in the picture.
Select subtitle language
For DVD or DivX discs that contain two or
more subtitle languages.
1
During play, tap anywhere except for the
upper left corner to display menu on the
screen, if necessary.
2
3
Tap
to display the 2nd menu
Tap
repeatedly to select a language.
» The selected language is displayed.
Select slide show duration
1 Tap anywhere except for the upper left
corner to display menu on the screen, if
necessary.
2
18
EN
Tap repeatedly to select:
• Fast: 3 seconds
• Normal: 5 seconds
• Slow: 8 seconds
Disconnect Bluetooth devices
1
To disconnect one device, tap
(green) is displayed.
»
(red).
Tip
• The device will also be disconnected when the
You can make or receive phone calls with
Bluetooth-enabled phones through the unit.
You can also listen to music from a Bluetoothenabled device.
device is moved beyond the operational range.
• If you want to reconnect the device to the
unit, place it within the operational range.
• If you do not want to reconnect the device to
the unit automatically, tap >[Auto connect],
then select [Off]. For details, see the “Adjust
Bluetooth settings” section.
Pair Bluetooth devices
You can connect up to eight Bluetooth devices
to the car entertainment system.
Note
• The effective operation range between the
car entertainment system and the paired
Bluetooth device is approximately 10 meters
(30 feet). Any obstacle between the system
and the Bluetooth device can decrease the
operational range.
• Compatibility with all Bluetooth devices is not
guaranteed.
Make a call
1 Pair the phone with the unit.
2 Tap to display the home menu.
3 Tap [Bluetooth].
» The Bluetooth menu is displayed.
On the Bluetooth device:
1
2
3
4
Turn on the Bluetooth function.
Search for Bluetooth device.
4
Tap or
then tap
5
Tap or to search for phone number
from the following list:
Select “CID2280” in the pairing list.
Enter default password “0000”.
» if pairing succeeds. phone call record
is displayed on the screen of the car
entertainment system.
•
•
•
•
to select the paired phone,
.
[Missed calls]
[Received calls]
[Dialed calls]
[Phone book]
EN
19
English
7 Play with
Bluetooth
device
•
•
Or tap
to dial.
[Sim phone book]
[Local phone book]
to dial number directly, then tap
Receive call
By default, all incoming calls are received
automatically.
1
2
If there is incoming call, [Incoming call...]
flashes on the screen. Speak into the
Bluetooth microphone.
When conversation ends, tap
to terminate the call.
Listen to music from
Bluetooth device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the unit. If the device also supports
Audio Video Remote Control Profile (AVRCP)
profile, you can use the control on the unit to
play music stored on the device.
1
2
3
Pair the phone with the unit.
Tap
to return to home menu.
Tap [Bluetooth].
» The Bluetooth menu is displayed.
4
Start play music via device.
•
If your device support AVRCP,
1
Tap
.
2
Tap
to start play.
(red)
Tip
• You can select to receive calls manually by set
[Auto answer] to [Off] status.
Switch phone call to the mobile
If you do not want your passenger to hear
your incoming call, you can switch the call to
the mobile.
1
During talking, tap .
» The voice is transferred from the unit’s
loudspeaker to the mobile phone.
20
EN
Adjust Bluetooth settings
You can change below Bluetooth settings:
• [Bluetooth]: to turn on or off
“Bluetooth” function
• [Auto connect]: to turn on or off
“Auto connect” function
• [Auto answer]: to turn on or off
“Auto answer” function
• [Pairing code]: to set paring code
• [Phone Book Sync]: to synchronize
phone book
In Bluetooth menu, tap .
» The option menu is displayed.
8 Adjust sound
English
1
Adjust volume
1 Turn VOL clockwise to increase volume.
•
2
Tap an option to change the setting.
Tip
Turn VOL anti-clockwise to reduce volume.
Mute
1 During play, press
•
• You can also adjust Bluetooth settings in the
.
To turn the sound back on, press again.
“Settings” menu.
Tip
• You can also turn off sound by tapping
on
the screen.
Select preset equalizer
You can select preset equalizer:
• [User]
• [Techno]
• [Rock]
• [Classic]
• [Jazz]
• [Optimal]
• [Flat]
• [Pop]
1
Tap anywhere except for the upper left
corner to display menu on the screen, if
necessary.
2
Tap .
» The current Equalizer setting is
displayed.
EN
21
3
4
Tap
Tap
•
•
•
•
•
•
or
5
Tap F, R, L, or R to adjust fader/balance value.
• [Fade] fader range: +24 to -24.
(F = front speaker, R = rear speaker)
• [Balance] balance range: -24 to +24.
(L = left speaker, R = right speaker)
6
Tap
to exit.
to select an EQ.
or to adjust below settings:
[Bass] bass range: -14 to +14
[Mid] middle range: -14 to +14.
[Treb] treble range: -14 to +14
[LPH] low pass filter range: 60, 80,
100, 200.
[MPF] middle pass filter range: 500,
1K, 1.5K, 2.5K.
[HPF] high pass filter range:10K,
12.5K, 15K, 17.5K.
5
Tap to restore the above settings into
default settings.
6
Tap
to exit.
Adjust fader/balance
You can also adjust the front and rear speaker
balance, the left and right speaker balance, and
subwoofer settings.
1
Tap anywhere except for the upper left
corner to display menu on the screen, if
necessary.
2
3
Tap
.
Tap
» Below options are displayed:
4
Tap or to select subwoofer volume.
• [Sub] subwoofer volume: 0 to 24.
22
EN
Set Dynamic Bass Boost
(DBB)
1 Tap to toggle between the settings.
•
•
[DBB] on: The
icon is
illuminated.
[DBB] off (default): The
gray.
icon is
General
settings
[Radio
region]
Options
Description
Select one that
matches your
location.
[Radio
range]
[USA], [S.
Amer-1],
[Arabia],
[China],[S.
Amer-2],
[Europe],
[Korea],
[OIRT]
[Local]
Only stations with
strong signals can
be broadcast.
[Distance] Stations with
strong and weak
signals can be
broadcast.
[off]
Never turn on the
screen saver.
[10s]
Turn on the
screen saver
automatically 10
seconds after last
operation.
[20s]
Turn on the
screen saver
automatically 20
seconds after last
operation.
[Night]
Select this mode
at night.
[Dusk]
Select this mode
at dusk.
[Normal] Set screen
dimmer to normal
mode.
[Bright]
Select this
mode in bright
environment.
[Red]
Button backlight
turns red.
[Blue]
Button backlight
turns blue.
Display system setup menu
1 Tap to display main menu.
2
Tap [Settings].
» The settings menu is displayed.
[Blackout]
Tip
• When the setup adjustment is completed, tap
to return to main menu.
Adjust general settings
1 Tap [General], if necessary.
[Dimmer
Mode]
2
3
Tap
or
to highlight a setting.
Tap an option to display/select the option.
[Key color]
EN
English
9 Adjust settings
23
[Beep]
[On]
[Off]
[WallPaper] [Blue]
[Black]
[Red]
[F1]
[Calibration]
4
Tap
Turn on the
beep sound. Each
time you press a
button, the unit
beeps.
Turn off the beep
sound.
Turn background
color to blue.
Turn background
color to black.
Turn background
color to red.
Select F1 picture
as wall paper.
Calibrate the
touch screen.
5
• Only picture saved in 800 x 480 pixel
(resolution) and in .bmp format can be used as
wallpaper.
Adjust sound settings
1 Tap [Sound].
to exit.
Set wallpaper
You can change the screen background by
using one built-in picture or your picture.
1
To use your picture as wallpaper, convert
the picture into .bmp format and make sure
it is in 800 x 480 pixel resolution first, then
save the picture onto map card, and then
insert the map card into MAP slot.
2
3
4
Tap [Settings] > [General].
Tap
•
•
•
•
•
•
24
EN
to exit.
Note
2
Tap
Tap
or
to highlight [WallPaper].
or to select an option.
[Blue]: Turn background color to blue.
[Black]: Turn background color to black.
[F1]: Select the F1 picture as background.
[User]: Choose a picture as
wallpaper.
If [User] is selected, a new window
is displayed.
Tap or select a picture from the list.
Or
Tap [Scan SD] > to select a picture
from the map card.
The background picture is changed.
Tap an option repeatedly to select:
Sound Options Description
settings
[Sub
[On]
Turn on the subwoofer.
woofer]
[Off]
Turn off the subwoofer.
[Sub
[80Hz] Select subwoofer filter
woofer
criteria.
filter]
[120Hz]
[160Hz]
[DBB] [On]
The Dynamic Bass Boost
(DBB) function is on.
[Off]
The DBB function is off.
[DRC] [On]
Makes loud sound level
softer and soft sound level
louder so that you can
watch the DVD movies
at a low volume, without
disturbing others
[Off]
The DRC function is off.
3
Tap
to exit.
[Parking]
[On]
[Off]
2
[DivX
registration
code]
When you drive in
reverse, the rear
view is displayed in
mirror.
Disable video view
during drive.
Enable video view
during drive.
View code for DivX
registration.
Tap an option repeatedly to select:
Video
settings
[Aspect
ratio]
[Video
input]
[Rear
camera]
Options
[Full]
Description
For widescreen
display.
[Normal] For normal display.
[Auto]
The correct format
is set automatically.
Select this option
if you are not
sure which format
should be selected.
[NTSC] Used in the United
States, Canada,
Japan, Mexico, the
Philippines, South
Korea, Taiwan,
and some other
countries.
[PAL]
Used in China,
India, Singapore, the
western European
countries (except
France), Australia,
and some other
countries.
[Normal] When you drive in
reverse, the rear
view is displayed
normally.
3
Tap
to exit.
Adjust Bluetooth settings
1 Tap [Bluetooth].
2
Tap an option repeatedly to select:
Bluetooth
Options Description
settings
[Bluetooth] [On]
Turn on the
Bluetooth function.
[Off]
Turn off the
Bluetooth function.
[Auto
[On]
If the pre-paired
connect]
device is within the
effective range, the
unit re-connects to
pre-paired device
automatically.
[Off]
Need to re-connect
manually.
[Auto
[On]
Answer paired
answer]
phone call
automatically.
EN
25
English
[Mirror]
Adjust video settings
1 Tap [Video].
[Off]
[Pairing
code]
3
Tap
Answer phone call
manually.
Set code for
pairing the car
entertainment
system with other
Bluetooth devices.
The default code is
0000.
Language
settings
[DVD
subtitle]
to exit.
Adjust language settings
1 Tap [Language].
[Disc
menu]
3
2
Tap an option repeatedly to select:
Language
settings
[OSD]
[DVD
audio]
26
EN
Options
Description
[English]
Select on-screendisplay language.
[ࣇບሱ༵]
[‫ڰ‬ບሱ༵]
[English]
Select DVD audio
language. Options
available are
depends on DVD
disc.
[ࣇບሱ༵]
[‫ڰ‬ບሱ༵]
Tap
Options
Description
[English]
Select DVD subtitle
language. Options
available are
depends on DVD
disc.
[ࣇບሱ༵]
[‫ڰ‬ບሱ༵]
[Off]
Turn off subtitle
language display.
[English]
Select DVD menu
language. Options
available are
depends on DVD
disc.
[ࣇບሱ༵]
[‫ڰ‬ບሱ༵]
to exit.
You can set different volume for different modes.
1
Tap [Volume].
» The volume setting sub-menu is
displayed.
2
Tap on a source.
• [DVD]/[USB]/[SD]
• [CMMB]
• [Radio]
• [Bluetooth]
• [AV-IN1]
• [AV-IN2]
3
Tap or to assign value: 0 to 12.
» When switches to the source, the
volume increases automatically.
4
Press
to exit.
Adjust DVD rating
1 Tap [DVD rating].
2
Tap an option repeatedly to select:
DVD rating Options Description
[Set
Set password to
password]
restrict the play of
discs. The default
password is 0000.
[Rating
[Kid
Acceptable for
level]
safe]
children.
[G]
Acceptable for general
viewers.
[PG]
Parental guidance
suggested.
[PG-13] Unsuitable for children
under age 13.
[PG-R] Recommend parents
to restrict children
under 17 to view.
[R]
Restricted.
Recommend parent to
guide children under
17 to view.
[NC-17] Unsuitable for children
under age 17.
[Adult] Acceptable for adults
only.
[Load
Restore to default
factory]
settings.
3
Tap
to exit.
EN
27
English
Adjust volume settings
10 Others
Listen to other devices
You can connect an external audio/video device
to the unit.
1
Connect the car audio to the device with
the supplied AV cable.
Tip
• When the unit is reset, all the settings remain
unchanged.
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
2
3
4
Tap
to display the main menu.
1
2
3
Take out the unit from dashboard.
4
Replace the fuse.
Check the electric connection.
Buy a fuse that matches the voltage of the
damaged fuse (15A)
Tap [AV-IN1].
Operated the connected the device (see
the instructions manual of the device).
Tip
• If you connected the system to other audio
device through the REAR OUT L/R connector
(see “Connect wires” section), tap [AV-IN2] to
listen to that device.
Reset
When the car entertainment system hangs up,
you can reset it.
1
Press RESET with a ball-point pen or
similar tool.
28
EN
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
Note
• Product information is subject to change
without prior notice.
Disc player
System
Frequency response
Signal/noise ratio
Total harmonic
distortion
Channel separation
Video signal format
Video output
English
11 Product
information
DVD / CD audio /
MP3 system
20 Hz - 20k Hz
>75dB
Less than 1%
>55dB
NTSC only
1 +/- 0.2V
General
Power supply
Fuse
Suitable speaker
impedance
Continuous power
output
Line output voltage
Subwoofer output
voltage
Aux-in level
Dimensions
(W x H x D)
(main unit)
Weight (main unit)
Operating
temperature range
12 V DC (11 V - 16 V),
negative ground
15 A
4-8
24 W x 4 channels
(4 10% T.H.D.)
2.0 V ( CD play mode;
1 kHz, 0 dB, 10 k
load)
2.0 V (CD play mode,
61 Hz, 0 dB, 10 k
load)
500 mV
178 x 101 x 165 mm
Radio
Frequency range - FM
Frequency range - AM(MW)
Usable sensitivity - FM
Usable sensitivity - AM
(MW)
87.5 - 108.0 MHz
522 - 1620 KHz
8 uV
30 uV
LCD
Screen size
Display resolution
Contrast ratio
Brightness
6.2 inches (16:9)
800RGB x 480
600
400 cd/m2
2.5 kg
-20°C to 70 °C
EN
29
Bluetooth
Communication Bluetooth Standard
system
version 2.0
Output
Bluetooth Standard Power
Class 2
Maximum
Line of sight approx. 8m
communication
range
Frequency band 2.4 GHz band (2.4000
GHz - 2.4835 GHz)
Compatible
Hands-Free Profile (HFP)
Bluetooth
Handset Profile (HSP)
Advanced Audio
profiles
Distribution Profile
(A2DP)
Audio Video Remote
Control Profile (AVRCP)
SBC (Sub Band Codec)
Supported
SBC (Sub Band Codec)
codecs
Receive
Transmit
Compatible USB devices:
• USB flash memory (USB 2.0 or USB1.1)
• USB flash players (USB 2.0 or USB1.1)
• Memory cards (SD / MMC / SDHC)
Supported formats:
• USB or memory file format: FAT16,
FAT32
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• WMA v9 or earlier
• Directory nesting up to a maximum
of 8 levels
• Number of albums/ folders:
maximum 99
• Number of tracks/titles: maximum 999
• ID3 tag V2.0 to V2.4
• File name in Unicode UTF8
(maximum length: 128 bytes)
30
EN
Supported MP3 disc format:
• ISO9660, Joliet
• Maximum title number: 512 (depending
on file name length)
• Maximum album number: 255
• Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
• Supported Bit-rates: 32-320 Kbps and
variable bit rate
Supported video formats:
• DVD
• Divx Home theater
• Xvid
Note
• To ensure a better playback, it is
recommended that:
- the image size is not larger than 640 X
480 pixels.
- the frame rate is 20 fps.
- the data rate is not higher than 500 kbps.
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•
Car engine has not been started. Start
the car engine.
•
Connection is incorrect.
•
Fuse has been damaged. Replace fuse.
No sound
•
Volume is too low. Adjust volume.
•
Speaker connection is incorrect.
Disc does not play
•
Disc is upside down. Ensure that the
printed side is upwards.
•
Disc is dirty. Clean the disc with a
clean, soft, lint-free cloth. Wipe the disc
outwards from the center.
•
Disc is defective. Try another disc.
•
Incompatible disc is used. Try another
disc.
•
Disc rating exceeds the restrict setting.
Change the rating settings to lower one.
•
Disc region code is not compatible with
the unit. Use disc with proper region
code.
No image
•
Parking brake wire connection is
incorrect. Check the parking wiring.
Image flashes or distorted
•
Video DVD settings do not match with
the DVD. Adjust video DVD settings.
•
Video connection is improper. Check the
connections.
Noise in broadcasts.
•
Signals are too weak. Select other
stations with stronger signals.
•
Check the connection of the car antenna.
•
Change broadcast from stereo to mono.
Preset stations lost.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Fuse is broken
•
The Fuse is incorrect. Replace it with a
15A fuse.
•
Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12
•
USB/SD/MMC data error. Check the USB
device or SD/MMC card.
About Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
•
The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move
the device closer to the system or
remove any obstacle between the device
and the system.
Cannot connect with the system.
•
The device does not support the profiles
required for the system.
•
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device for how to enable the function.
•
The system is not in the pairing mode.
EN
31
English
12 Troubleshooting
•
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired mobile phone connects and
disconnects constantly.
•
The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
•
Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
•
For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.
13 Glossary
B
Bite rate
The max data transfer through the USB port.
Bluetooth
Bluetooth® is a short-rang wireless protocol
that is meant to allow mobile devices to share
information and applications without the
worry of cables or interface incompatibilities.
The name refers to a Viking King who unified
Denmark. Operate at 2.4GHz. For more
information, see www.bluetooth.com.
M
MMC
MultimediaCard. A type of memory card with
a flash memory.
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
R
Region code
A system that allows discs to be played only
in the region designated. This unit only plays
discs that have compatible region codes. You
can find the region code of your unit on the
product label. Some discs are compatible with
more than one region (or ALL regions.)
32
EN
English
S
SD
Secure Digital. A type of memory card with a
flash memory.
SDHC
Secure Digital High Capacity (SDHC) is a
type of flash memory card based on the SDA
2.00 specification. The SDA 2.00 specification
enables SD cards to reach higher capacities
from 4GB to 32GB, and growing.
W
WMA (Windows Media Audio)
An audio format owned by Microsoft, is a
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
tools, Windows Media Video encoding
technology, and Windows Media Audio
encoding technology.
EN
33
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CID2280_00_UM_V1.0