HC-V700M&V700-PPCPU-VQT3Y41_mst.book 1 ページ
2011年12月28日 水曜日 午前10時21分
Owner’s Manual
High Definition Video Camera
Model No.
HC-V700
HC-V700M
Before connecting, operating or adjusting this product, please read the instructions completely.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
VQT3Y41
P PC PU
until
2012/2/1
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 2 ページ
2011年12月28日 水曜日 午前10時21分
Dear Customer,
Date of Purchase
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on
the market today. Used properly, we’re
sure it will bring you and your family
years of enjoyment. Please take time to
fill in the information on the right.
The serial number is on the tag located
on the back of your camera. Be sure to
retain this manual as your convenient
camera information source.
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Safety Precautions
WARNING:
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.
CAUTION!
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined
space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and
similar items.
≥ Do not place sources of naked flames, such as lighted candles, on this unit.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
2
VQT3Y41
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 3 ページ
2011年12月28日 水曜日 午前10時21分
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation
instructions and use only shielded interface cables with ferrite
core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name:
Panasonic
Model No.:
HC-V700P/HC-V700MP
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of North America
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
HC-V700P
HC-V700MP
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
3
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 4 ページ
2011年12月28日 水曜日 午前10時21分
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.
AC adaptor
This AC adaptor operates on AC between 100 V and 240 V.
But
≥ In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power
supply only.
≥ When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to
suit the AC outlet configuration.
≥ When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited
to the voltage of the AC supply and the rated current of the AC adaptor.
≥ Contact an electrical parts distributor for assistance in selecting a suitable AC plug
adaptor or AC cord set.
Install this unit so that the power cord can be unplugged from the socket outlet immediately
if any problem occurs.
THE FOLLOWING APPLIES ONLY IN LATIN AMERICAN COUNTRIES.
Install this unit so that the AC mains lead can be unplugged from the socket outlet
immediately if any problem occurs.
∫ Concerning the battery
Battery pack (Lithium ion battery pack)
≥ Use the specified unit to recharge the battery pack.
≥ Do not use the battery pack with equipment other than the specified unit.
≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals.
≥ Do not touch the plug terminals (i and j) with metal objects.
≥ Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly
with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes
thoroughly with water, and then consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or
incinerate.
CAUTION
≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities or dealer and ask for
the correct method of disposal.
4
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 5 ページ
2011年12月28日 水曜日 午前10時21分
∫ Product Identification Marking
Product
Location
High Definition Video Camera
Battery holder
AC adaptor
Bottom
U.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
5
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 6 ページ
2011年12月28日 水曜日 午前10時21分
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety
instructions on the unit and the applicable safety instructions listed below. Keep these
operating instructions handy for future reference.
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8)
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the
apparatus.
6
VQT3Y41
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or
sold with the
apparatus. When a
cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 7 ページ
2011年12月28日 水曜日 午前10時21分
Precautions
USE & LOCATION
WARNING
≥ TO AVOID SHOCK HAZARD ... Your
camera and power supply should not be
exposed to rain or moisture. Do not
connect the power supply or operate your
camera if it gets wet. Your camera has
been designed for outdoor use, however it
is not designed to sustain direct exposure
to water, rain, sleet, snow, sand, dust, or a
direct splashing from a pool or even a cup
of coffee. This action could permanently
damage the internal parts of your camera.
Do not attempt to disassemble this unit.
There are no user serviceable parts
inside. Unplug your camera from the
power supply before cleaning.
≥ AS WITH ANY SMALL OBJECT, SD
CARDS CAN BE SWALLOWED BY
YOUNG CHILDREN. DO NOT ALLOW
CHILDREN TO HANDLE THE SD CARD.
CAUTION
≥ DO NOT AIM YOUR CAMERA AT THE
SUN OR OTHER BRIGHT OBJECTS
≥ DO NOT EXPOSE YOUR CAMERA TO
EXTENDED HIGH TEMPERATURE ...
Such as, in direct sunlight, inside a closed
car, next to a heater, etc... This action
could permanently damage the internal
parts of your camera.
≥ AVOID SUDDEN CHANGES IN
TEMPERATURE ... If the unit is suddenly
moved from a cold place to a warm place,
moisture may form on the SD card and
inside the unit.
≥ DO NOT LEAVE YOUR CAMERA OR
THE POWER SUPPLY TURNED ON
WHEN NOT IN USE.
≥ STORAGE OF YOUR CAMERA ... Store
and handle your camera in a manner that
will not subject it to unnecessary
movement (avoid shaking and striking).
Your camera contains a sensitive pick-up
device which could be damaged by
improper handling or storage.
CARE
≥ TO CLEAN YOUR CAMERA ... Do not
use strong or abrasive detergents when
cleaning your camera body.
≥ TO PROTECT THE LENS ... Do not touch
the surface of the lens with your hand.
Use a commercial camera lens solution
and lens paper when cleaning the lens.
Improper cleaning can scratch the lens
coating.
≥ TO PROTECT THE FINISH OF YOUR
CAMERA ... Before handling your
camera, make sure your hands and face
are free from any chemical products, such
as suntan lotion, as it may damage the
finish.
-If you see this symbol-
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid
in the European Union.
If you wish to discard
this product, please
contact your local
authorities or dealer and
ask for the correct
method of disposal.
7
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 8 ページ
∫ About the recording format for
recording motion pictures
You can record motion pictures in either
AVCHD*1 or iFrame recording formats using
this unit. (l 51, 62)
*1 It is compatible with the AVCHD
Progressive (1080/60p).
AVCHD:
It is possible to record in the best image
quality of this unit (1080/60p) and high
definition image (1080/60i).
It is suitable for viewing on a large format TV
or for saving to disc*2.
*2 To save the image recorded in 1080/
60p, it is required to copy to a disc using
the supplied software HD Writer AE 4.0.
iFrame:
This is a recording format suitable for
viewing and editing on a Mac (iMovie’11).
Using iMovie’11, iFrame motion pictures can
be imported faster than AVCHD motion
pictures. Also, the imported file size of
iFrame motion pictures will be smaller than
that of AVCHD motion pictures.
≥ It is not compatible with motion pictures
recorded in AVCHD format.
∫ Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit
(including any other non-built-in memory
related component).
∫ Handling of built-in memory
[HC-V700M]
This unit is equipped with the built-in
memory. When using this component, pay
attention to the following points.
8
VQT3Y41
2011年12月28日 水曜日 午前10時21分
Back up data periodically.
The built-in memory is temporary storage. In
order to avoid erasing data due to static
electricity, electromagnetic waves,
breakage, and failures, back up the data to a
PC or DVD disc. (l 112, 125)
≥ Access lamp [ACCESS] (l 19)
illuminates while the SD card or built-in
memory is being accessed (initialization,
recording, playback, deleting etc.). Do not
perform the following operations when the
lamp illuminates. It may damage the builtin memory or cause a malfunction in the
unit.
j Turn the unit off (remove the battery)
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
≥ About disposing of or giving away this unit.
(l 150)
∫ About Condensation (When
the lens or the LCD monitor is
fogged up)
Condensation occurs when the ambient
temperature or humidity changes. Be careful
of condensation since it causes lens or LCD
monitor stains, fungus and camera
malfunction.
≥ For more details about the cause and
action required for condensation, refer to
page 154.
∫ Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
≥ 4 GB or more Memory Cards that do not have
the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are not
based on SD Memory Card Specifications.
≥ Refer to page 23 for more details on SD
cards.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 9 ページ
2011年12月28日 水曜日 午前10時21分
∫ For the purposes of this
owner's manual
≥ SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
≥ Function that can be used for Motion
Picture Recording Mode:
Function that can be used for Still Picture
Recording Mode:
≥ Function that can be used for the playback
mode:
Function that can be used for the playback
mode (motion pictures only):
Function that can be used for the playback
mode (still pictures only):
≥ Scene(s) recorded in 1080/60p, 1080/60i
or side-by-side (SbS 3D): “AVCHD
scene(s)”
≥ Pages for reference are indicated by an
arrow, for example: l 00
This owner’s manual is designed for use
with models HC-V700 and HC-V700M .
Pictures may be slightly different from the
original.
≥ The illustrations used in this owner’s manual
show model HC-V700 , however, parts of
the explanation refer to different models.
≥ Depending on the model, some functions
are not available.
≥ Features may vary, so please read carefully.
≥ Not all models may be available
depending on the region of purchase.
9
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 10 ページ
2011年12月28日 水曜日 午前10時21分
Contents
Accessories.............................................12
Quick Guide.............................................13
Preparation
Names and Functions of
Main Parts ................................................17
Power supply........................................... 20
Inserting/removing the battery........... 20
Charging the battery ......................... 21
Charging and recording time............. 22
Recording to a card ................................ 23
Cards that you can use
with this unit ...................................... 23
Inserting/removing an SD card.......... 24
Turning the unit on/off............................25
Selecting a mode ....................................26
How to use the touch screen .................26
About the Touch Menu ...................... 27
Setting date and time.............................. 28
Basic
Before recording ..................................... 29
Selecting a media to record
[HC-V700M].............................................. 30
Recording motion pictures ....................31
Recording still pictures .......................... 33
Recording still pictures in Motion
Picture Recording Mode.................... 34
Intelligent Auto Mode ............................. 35
Motion picture/Still picture
playback ..................................................37
Using the menu screen .......................... 40
Using the Setup Menu ............................41
Advanced (Recording)
Using the zoom .......................................49
Zoom ratio during the
still picture recording mode ............... 49
Image Stabilizer Function ......................50
1080/60p recording ................................. 51
10
VQT3Y41
Recording with the Touch
Function .................................................. 52
Touch function icons ......................... 52
Recording functions of
operation icons ....................................... 55
Operation icons................................. 55
Recording functions of menus.............. 61
Manual recording.................................... 74
White Balance................................... 75
Manual shutter speed/
iris adjustment................................... 76
Manual Focus adjustment................. 77
Recording 3D image ............................... 78
Advanced (Playback)
Playback Operations .............................. 81
Motion picture playback using
operation icon ................................... 81
Creating still picture from
motion picture ................................... 82
Highlight & Time Frame Index .......... 82
Repeat Playback............................... 83
Resuming the previous playback ...... 83
Zooming in on a still picture
during playback (Playback zoom) ..... 83
Various playback functions ................... 85
Playing back motion pictures/
still pictures by date .......................... 85
Highlight Playback ............................ 86
Changing the playback settings and
playing back the slide show .............. 91
Deleting scenes/still pictures ................ 93
Deleting part of a scene
(AVCHD) ........................................... 94
Dividing a scene (AVCHD)................ 95
Dividing a scene to partially delete
(iFrame/MP4) .................................... 96
Deleting personal information ........... 97
Protecting scenes/still pictures ......... 97
Relay scene combining
[HC-V700M] ............................................. 98
Copy/Dubbing
Copying between SD card and
Built-in Memory [HC-V700M]............... 109
Connecting a DVD burner to copy to
/play back a disc ................................... 112
Preparing for copying/
playing back .................................... 112
Copying to discs.............................. 114
Playing back the copied disc........... 117
Managing the copied disc ............... 117
Dubbing with a Blu-ray disc
recorder, video device, etc.................. 119
3D image storage .................................. 123
Preparation
Basic
Recording modes/approximate
recordable time ..................................... 156
Approximate number of recordable
pictures.................................................. 157
Specifications ....................................... 158
Optional accessories ........................... 162
Accessory Order Form (For USA
and Puerto Rico Customers) .......... 165
Limited Warranty (ONLY FOR
U.S.A. AND PUERTO RICO) ................. 166
Warranty
(For Canadian Customers)................... 168
Useful Information
(Only For Latin American
Countries).............................................. 169
Index ...................................................... 170
Spanish Quick Use Guide/
Guía española para el uso rápido ....... 172
Advanced
(Playback)
Watching Video/Pictures
on your TV ............................................. 100
Connecting with a HDMI
mini cable ....................................... 103
Connecting with the AV
multi cable ...................................... 103
Playback using VIERA Link™.............. 104
3D image playback................................ 106
Converting and playing back 2D
images as 3D ........................................ 108
2011年12月28日 水曜日 午前10時21分
Advanced
(Recording)
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 11 ページ
With a PC
With a PC
Copy/Dubbing
What you can do with a PC .................. 125
End User License Agreement ......... 127
Operating environment ........................ 129
Installation ............................................. 132
Connecting to a PC............................... 133
About the PC display ...................... 135
Starting HD Writer AE 4.0 ..................... 136
Reading the operating instructions
of the software applications............. 136
If using Mac ........................................... 137
Others
Others
Indications ............................................. 138
Messages............................................... 141
About recovery ................................ 142
Troubleshooting.................................... 143
Cautions for use.................................... 149
About copyright .................................... 155
11
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 12 ページ
2011年12月28日 水曜日 午前10時21分
Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Dec. 2011. These may be subject to change.
Battery pack
VW-VBK180
AC adaptor
(P/PC)
VSK0780
(PU)
VSK0781
AC cable
K2CA2CA00025
AV multi cable
K1HY12YY0016
USB cable
K2KYYYY00201
Shoe adaptor
VYC1055
CD-ROM
Software
12
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 13 ページ
2011年12月28日 水曜日 午前10時21分
Quick Guide
∫ Inserting the battery
Install the battery by inserting it in the
direction shown in the figure.
∫ Inserting/removing an SD card

≥ Insert the battery until it clicks and locks.


∫ Charging the battery
Access lamp [ACCESS] A
≥ When this unit is accessing the SD
card or built-in memory, the access
lamp lights up.




≥ Check that the access lamp has gone off.
1)
A DC input terminal
1 Connect the AC cable to the AC
adaptor, then the AC outlet.
2 Connect the AC adaptor to the DC input
terminal.
≥ The status indicator will flash red at an
interval of 2 seconds (approximately 1
second on, 1 second off), indicating that
charging has begun.
It will turn off when the charging is
completed.
Open the SD card cover and insert
(remove) the SD card into (from) the
card slot B.
≥ Face the label side C in the direction
shown in the illustration and press it
straight in as far as it will go.
≥ Press the center of the SD card and then
pull it straight out.
2) Securely close the SD card cover.
≥ Securely close it until it clicks.
13
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 14 ページ
2011年12月28日 水曜日 午前10時21分
∫ Turning the unit on/off
∫ Selecting a mode
Turning the unit on and off with the
power button
Open the LCD monitor and press the power
button to turn on the unit.
Operate the mode switch to change the
mode to
,
or
.

Motion Picture Recording
Mode (l 31)
Still Picture Recording Mode
(l 33)
A The status indicator lights on.
≥ To turn off the unit, hold down the power
button until the status indicator goes off.
Turning the unit on and off with the LCD
monitor
Opening the LCD monitor turns on the unit.
Closing the LCD monitor turns off the unit.
To turn on the unit
Playback Mode (l 37, 81)
∫ How to use the touch screen
You can operate by directly touching the
LCD monitor (touch screen) with your finger.
Touch
Touch and release the touch screen to select
icon or picture.

A The status indicator lights on.
To turn off the unit

B The status indicator goes off.
14
VQT3Y41
Slide while touching
Move your finger while pressing on the touch
screen.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 15 ページ
Touch Menu
Touch
to display the Touch Menu.
Touch (left side)/ (right side) of
on
the Touch Menu to switch the operation
icons.
2011年12月28日 水曜日 午前10時21分
∫ Recording motion pictures
1)
2)
3)
Change the mode to
.
Open the LCD monitor.
Press the recording start/stop button to
start recording.

T
W
T
W
A Touch Menu
∫ Language selection
1)
2)
Touch MENU , then touch [SETUP] #
[LANGUAGE].
Touch desired language.
∫ Selecting a media to record
HC-V700M
1)
2)
Change the mode to
Select the menu.
MENU
3)
or
.
A When you begin recording, ; changes
to ¥.
∫ Recording still pictures
1)
2)
3)
Change the mode to
.
Open the LCD monitor.
Press the
button fully to take the
picture.
: [MEDIA SELECT]
Touch the media to record motion
pictures or still pictures.
≥ The media is selected separately to
motion pictures or still pictures is
highlighted in yellow.
4) Touch [ENTER].
15
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 16 ページ
∫ Motion picture/Still picture
playback
1)
2)
Change the mode to
.
Touch the play mode select icon A.
ALL
≥ It will switch to the screen displaying
and thumbnail scroll lever E when no
operation is performed for approximately
5 seconds.
≥ To display the next (previous) page:
j Slide the thumbnail display upward
(downward) while touching it.
j Touch
(up) /
(down) of the
thumbnail scroll lever.
5)
3)
HC-V700
Select the still picture B or the
recording format of the motion picture C
you wish to play back.
2011年12月28日 水曜日 午前10時21分
Select the playback operation by
touching the operation icon.
0h01m30s



HC-V700M
Select the media type D and then select
the still picture B or the recording
format of the motion picture C you wish
to play back.



≥ Touch [ENTER].
≥ The icon is displayed in the thumbnail
display when the item for motion picture is
touched.
(
,
,
,
,
and
)
≥
is displayed in the 1080/60p scenes
and
is displayed in the side-by-side
scenes when [ALL AVCHD] is touched.
4) Touch the scene or the still picture to be
played back.

16
VQT3Y41
F Operation icon
≥ Operation icons and screen display will
disappear when no touch operation is
performed for a specific period of time. To
display them again, touch the screen.
(Motion picture playback)
1/;: Playback/Pause
6:
Rewind playback
5:
Fast forward playback
∫:
Stops the playback and shows
the thumbnails.
(Still picture playback)
1/;: Slide show (playback of the still
pictures in numerical order) start/
pause.
2;: Plays back the previous picture.
;1: Plays back the next picture.
∫:
Stops the playback and shows
the thumbnails.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 17 ページ
2011年12月28日 水曜日 午前10時21分
Preparation
Names and Functions of Main Parts
1
1
2 3
4
5
6
AV MULTI
8
9
ヮリヤ
7
10
Shoe adaptor release lever
[SHOE ADAPTOR RELEASE] (l 164)
2 Intelligent auto/Manual button
[iA/MANUAL] (l 35, 74)
3 Optical image stabilizer button
[
O.I.S.] (l 50)
4 USB terminal [ ] (l 113, 120, 133)
5 1080/60p button [1080/60p] (l 51)
6 Power button [
] (l 25)
7 Battery release lever [BATT] (l 20)
8 HDMI mini connector [HDMI]
(l 100, 104)
9 AV multi connector [AV MULTI]
(l 100, 122)
≥ Use the AV multi cable (only the supplied
cable).
10 Microphone terminal [MIC]
≥ A compatible plug-in powered microphone
can be used as an external microphone.
≥ Audio will be stereo (2 ch) with the
external microphone input.
≥
(Microphone input level
meter) is displayed when the external
microphone is connected. (l 69)
≥ When the unit is connected with the AC
adaptor, sometimes noise may be heard
depending on the microphone type. In this
case, please switch to the battery for the
power supply and the noise will stop.
17
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 18 ページ
11
12
13
14
15
2011年12月28日 水曜日 午前10時21分
11 Speaker
12 Internal stereo microphones
13 Lens cover
≥ The lens cover opens in
Motion
Picture Recording Mode or
Still
Picture Recording Mode. (l 26)
14 Built-in flash (l 58)
15 Step up ring attachment part
(concave) (l 78)
16 Lens
17 Video light (l 60, 73)
16
17
18 19 20
21
18 Shoe adaptor mount
[SHOE ADAPTOR] (l 164)
19 Status indicator (l 25)
20 Recording start/stop button (l 31)
21 LCD monitor (Touch screen) (l 26)
22
≥ It can open up to 90o.


≥ It can rotate up to 180o A towards the lens
or 90o B towards the opposite direction.
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.
22 Battery holder (l 20)
18
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 19 ページ
23
2011年12月28日 水曜日 午前10時21分
23 Tripod receptacle
≥ If you attach a tripod with a 5.5 mm
(0.22 q) screw or larger, it may damage
this unit.
24 SD card cover (l 24)
25 Access lamp [ACCESS] (l 24)
26 Card slot (l 24)
24
25
26
27
28
29
27 Photoshot button [
] (l 33)
28 Zoom lever [W/T] (In Motion Picture
Recording Mode or Still Picture
Recording Mode) (l 49)
Thumbnail display switch [
/
]/
Volume lever [sVOLr] (In Playback
Mode) (l 38)
29 Mode switch (l 26)
30 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
30


31

1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
31 DC input terminal [DC IN] (l 21)
≥ Do not use any other AC adaptors except
the supplied one.
19
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 20 ページ
2011年12月28日 水曜日 午前10時21分
Preparation
Power supply
∫ About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBK180/VW-VBK360.
≥ The unit has a function for distinguishing batteries which can be used safely. The
dedicated battery (VW-VBK180/VW-VBK360) supports this function. The only
batteries suitable for use with this unit are genuine Panasonic products and
batteries manufactured by other companies and certified by Panasonic. (Batteries
which do not support this function cannot be used). Panasonic cannot in any way
guarantee the quality, performance or safety of batteries which have been
manufactured by other companies and are not genuine Panasonic products.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not liable
for any accident or failure occurring as a result of use of a counterfeit battery pack.
To ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
Inserting/removing the battery
≥ Press the power button to turn off the unit. (l 25)
Install the battery by inserting it in the direction shown in the figure.
Removing the battery
Be sure to hold down the power button until
the status indicator goes off. Then remove
the battery while supporting the unit to
prevent it from dropping.
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
Insert the battery until it clicks and
locks.
ャモヵヵ
20
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 21 ページ
2011年12月28日 水曜日 午前10時21分
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit for the first time.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
≥ The battery can also be charged using a battery charger (VW-BC10PP: optional).
≥ The battery will not be charged if the unit is turned on.
≥ It is recommended to charge the battery in a temperature between 10 °C and 30 °C
(50 °F and 86 °F). (The battery temperature should also be the same.)


A DC input terminal
≥ Insert the plugs as far as they will go.
1
2
Connect the AC cable to the AC adaptor, then the AC outlet.
Connect the AC adaptor to the DC input terminal.
≥ Be careful not to pinch the DC input terminal cover.
≥ The status indicator will flash red at an interval of 2 seconds (approximately 1 second on,
1 second off), indicating that charging has begun.
It will turn off when the charging is completed.
∫ Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with
the AC adaptor connected.
When recording for a long time, keep the AC adaptor connected and use it together with the battery.
∫ To charge by connecting to other device
It is possible to charge by connecting to another device with the USB cable (supplied).
Please refer to page 134.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 151.
≥ We recommend using Panasonic batteries. (l 12, 22, 162)
≥ If you use other batteries, we cannot guarantee the quality of this product.
21
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 22 ページ
2011年12月28日 水曜日 午前10時21分
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time
with doors and windows closed.
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH
≥ Charging times in parentheses are when charging from the USB terminal.
Battery model
number
[Voltage/Capacity
(minimum)]
Supplied battery/
VW-VBK180 (optional)
[3.6 V/1790 mAh]
VW-VBK360 (optional)
[3.6 V/3580 mAh]
Charging
time
2 h 25 min
(5 h 45 min)
4 h 20 min
(10 h 40 min)
Recording
mode
Maximum
continuous
recordable time
Actual
recordable
time
[1080/60p]
1 h 15 min
40 min
[HA],[HG],
[HX],[HE]
1 h 20 min
40 min
[iFrame]
1 h 25 min
45 min
[1080/60p]
2 h 40 min
1 h 20 min
[HA],[HG],
[HX]
2 h 50 min
1 h 25 min
[HE]
2 h 50 min
1 h 30 min
[iFrame]
3h
1 h 35 min
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
≥ Recordable time of 3D recording mode is the same. (During 3D recording mode, 1080/60p
and iFrame recording mode cannot be used.)
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Battery capacity indication
≥ The display changes as the battery capacity reduces.
#
#
#
#
If there is less than 3 minutes remaining, then
will become red. If the battery
discharges, then
will flash.
≥ Screen display will disappear when no touch operation is performed for a specific period
of time. However, it will be constantly displayed when the remaining battery time
becomes less than 30 minutes.
≥ The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
≥ When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
22
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 23 ページ
2011年12月28日 水曜日 午前10時21分
Preparation
Recording to a card
The unit can record still pictures or motion pictures to an SD card or built-in memory. To
record to an SD card, read the following.
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC
Memory Cards and SDXC Memory Cards. When using an SDHC Memory Card/SDXC
Memory Card with other equipment, check the equipment is compatible with these
Memory Cards.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for
motion picture recording.
Card type
SD Memory Card
Capacity
512 MB/1 GB/2 GB
SDHC Memory Card
4 GB/6 GB/8 GB/12 GB/16 GB/24 GB/32 GB
SDXC Memory Card
48 GB/64 GB
* SD Speed Class Rating is the speed
standard regarding continuous writing.
Check via the label on the card, etc.
e.g.:
≥ Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/
SDXC Memory Cards that can be used for motion picture recording on the following
website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
≥ Operation of the SD Memory Cards 256 MB or less is not guaranteed. Also, the SD
Memory Card 32 MB or less cannot be used for the motion picture recording.
≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.
≥ The operation of Memory Cards exceeding 64 GB cannot be guaranteed.
≥ When the write-protect switch A on SD card is locked, no recording,
deletion or editing will be possible on the card.
≥ Keep the Memory Card out of reach of children to prevent
swallowing.
32
23
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 24 ページ
2011年12月28日 水曜日 午前10時21分
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l 46, 47) When the SD card is
formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be
restored.
Caution:
Check that the access lamp has gone off.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD
card or built-in memory, the access lamp
lights up.
1



Open the SD card cover and
insert (remove) the SD card
into (from) the card slot B.
≥ Face the label side C in the direction
shown in the illustration and press it
straight in as far as it will go.
≥ Press the center of the SD card and then
pull it straight out.
2
Securely close the SD card
cover.
≥ Securely close it until it clicks.
≥ Do not touch the terminals on the back of
the SD card.
≥ Do not apply strong shocks, bend, or drop
the SD card.
≥ Electrical noise, static electricity or the
failure of this unit or the SD card may
damage or erase the data stored on the
SD card.
≥ When the card access lamp is lit, do not:
j Remove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or
this unit.
≥ Do not expose the terminals of the SD
card to water, dirt or dust.
24
VQT3Y41
≥ Do not place SD cards in the following
areas:
j In direct sunlight
j In very dusty or humid areas
j Near a heater
j Locations susceptible to significant
difference in temperature (condensation
can occur.)
j Where static electricity or
electromagnetic waves occur
≥ To protect SD cards, return them to their
cases when you are not using them.
≥ About disposing of or giving away the SD
card. (l 153)
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 25 ページ
2011年12月28日 水曜日 午前10時21分
Preparation
Turning the unit on/off
You can turn the unit on and off using the power button or by opening and closing the LCD
monitor.
Turning the unit on and off with the power button
Open the LCD monitor and press the power button to turn on the unit.

To turn off the unit
Hold down the power button until the status
indicator goes off.
A The status indicator lights on.
Turning the unit on and off with the LCD monitor
The unit is turned on when the LCD monitor is opened, and unit is turned off when it is
closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the unit on/off.
∫ To turn on the unit
∫ To turn off the unit


A The status indicator lights on.
B The status indicator goes off.
≥ The unit will not turn off while recording motion pictures even if the LCD monitor is closed.
≥ In the following cases, opening the LCD monitor does not turn on the unit. Press the power
button to turn on the unit.
j When the unit is originally purchased
j When you have turned off the unit using the power button
≥ To turn off the unit while connecting an external microphone with the MIC terminal, press
the power button.
25
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 26 ページ
2011年12月28日 水曜日 午前10時21分
Preparation
Selecting a mode
Slide the mode switch to switch between recording and playback.
Operate the mode switch to change the mode to
,
or
.
Motion Picture Recording Mode (l 31)
Still Picture Recording Mode (l 33)
Playback Mode (l 37, 81)
Preparation
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
∫ Touch
Touch and release the touch screen to select icon or
picture.
≥ Touch the center of the icon.
≥ Touching the touch screen will not operate while
you are touching another part of the touch screen.
∫ Slide while touching
Move your finger while pressing on the touch screen.
26
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 27 ページ
2011年12月28日 水曜日 午前10時21分
∫ About the operation icons
/
/
/
:
These icons are used to switch the menu and thumbnail
display page, for item selection and setting etc.
:
Touch to return to the previous screen such as when
setting menus.
About the Touch Menu
Touch
(left side)/
Touch
(right side) of
on the Touch Menu to switch the operation icons.
(left side)/ (right side) of
on the Touch Menu.
≥ It is also possible to switch the operation icons by sliding the Touch Menu right or left while
touching it.
A Touch Menu
T
W

Recording Mode
T
Playback Mode
FOCUS
2D→3D 
WB
W
ALL
SHTR
IRIS

MENU
MENU

B You can change the operation icons to display. (l 44)
C Displayed only during the Manual Mode. (l 74)
D Displayed only when connected to a TV. (l 108)
∫ To display the Touch Menu
Display of the Touch menu will disappear when no
touch operation is performed for a specific period
of time. To display it again, touch
.
27
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 28 ページ
2011年12月28日 水曜日 午前10時21分
≥ Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
Preparation
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1
Select the menu. (l 40)
MENU
2
: [SETUP] # [CLOCK SET]
Touch the date or time to be set, then set the desired value using
/ .
A Displaying the World time setting (l 41):
[HOME]/
[DESTINATION]
≥ The year can be set between 2000 and 2039.
≥ The 12-hour system is used to display the time.
3
Touch [ENTER].
≥ A message prompting for World Time setting may be
displayed. Perform the World Time setting by touching the screen. (l 41)
≥ Touch [EXIT] to complete the setting.
≥ The date and time function is driven by a built-in lithium battery.
≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. To
recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this
unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and
time for approx. 4 months. (The battery is still being recharged even if the unit is off.)
28
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 29 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Before recording
∫ Basic camera positioning




1 Hold the unit with both hands.
2 Put your hand through the grip belt.
3 It is convenient to use the Recording button icon A when holding the unit at waist level.
≥ When recording, make sure your footing is stable and there is no danger of colliding with
another person or object.
≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is
backlit, it will become dark in the recording.
≥ Keep your arms near your body and separate your legs for better balance.
≥ Do not cover the microphones with your hand etc.
∫ Basic motion picture recording
≥ The unit should normally be held steady when recording.
≥ If you move the unit when recording, do so slowly, maintaining a constant speed.
≥ The zoom operation is useful for recording subjects you cannot get close to, but overuse of
zoom in and zoom out can make the resulting motion picture less enjoyable to watch.
∫ Recording Yourself
Rotate the LCD monitor towards the lens side.
≥ The image is horizontally flipped as if you see a mirror
image. (However the image recorded is the same as a
normal recording.)
≥ Only some indications will appear on the screen. When
appears, return the direction of the LCD monitor to
normal position and check the warning/alarm indication.
(l 141)
29
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 30 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Selecting a media to record [HC-V700M]
The card and built-in memory can be selected separately to record motion pictures or still
pictures.
1
2
Change the mode to
or
.
Select the menu. (l 40)
MENU
3
: [MEDIA SELECT]
Touch the media to record motion
pictures or still pictures.
≥ The media is selected separately to motion pictures
or still pictures is highlighted in yellow.
4
Touch [ENTER].
30
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 31 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Recording motion pictures
1
2
3
Change the mode to
.
T
W
Open the LCD monitor.
Press the recording start/stop
button to start recording.

A Recording button icon
B When you begin recording, ; changes
to ¥.
≥ Recording can also be started/stopped by touching the recording button icon. This icon
functions in the same manner as the recording start/stop button.
4
Press the recording start/stop button again to pause recording.
∫ Screen indications in the Motion Picture Recording Mode
Recording mode
R 1h20m
0h00m00s
Approximate remaining recordable
time
≥ When the remaining time is less
than 1 minute, R 0h00m flashes
red.
0h00m00s
R 1h20m
Recording time elapsed
≥ “h” is an abbreviation for hour, “m”
for minute and “s” for second.
≥ Each time the unit is put into
recording pause, the counter
display will be reset to 0h00m00s.
≥ Screen display will disappear when no touch operation is performed for a specific period of
time. To display it again, touch the screen. (l 41)
≥ It will be constantly displayed when the remaining recordable time becomes less than
30 minutes.
≥ To change the recording format, change the Recording Mode (l 62) or press and
hold the 1080/60p button. (l 51)
≥ Still pictures can be recorded while recording the motion picture. (l 34)
≥ The images recorded between pressing the recording start/stop button to start recording
and pressing it again to pause recording become one scene.
31
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 32 ページ
2011年12月28日 水曜日 午前10時21分
When you record with the [REC MODE] set to [iFrame], the scenes longer than
approximately 20 minutes will be automatically divided. (Recording will continue.)
≥ (Maximum recordable scenes of a single SD card or built-in memory)
Recording formats
[1080/60p]/[HA]/[HG]/[HX]/[HE]
[iFrame]
Recordable scenes
Approx. 3900
Approx. 89100
Different dates (l 85)
Approx. 900
Approx. 900
≥ Maximum number of recordable scenes and maximum number of different dates will be
less than above table when there are both iFrame scenes and still pictures recorded on an
SD card or the built-in memory.
≥ While recording is in progress, the recording will not stop even if the LCD monitor is closed.
≥ Put the unit in Pause mode when connecting or disconnecting an external microphone with
the MIC terminal.
≥ Please refer to page 156 about approximate recordable time.
About the compatibility of the recorded motion pictures
When motion picture is recorded in AVCHD Progressive format
≥ Only motion pictures recorded with the recording format set to AVCHD Progressive are
supported by AVCHD Progressive compatible equipment.
≥ It is not always possible to play back motion pictures recorded with the recording
format set to AVCHD Progressive on AVCHD Progressive compatible equipment. In
such a case, play back on this unit instead.
When motion picture is recorded in AVCHD format
≥ Only motion pictures recorded with the recording format set to AVCHD are supported
by AVCHD compatible equipment. Images cannot be played with equipment that does
not support AVCHD (ordinary DVD recorders). Confirm that your equipment supports
AVCHD by referring to the operating instructions.
≥ It is not always possible to play back motion pictures recorded with the recording
format set to AVCHD on AVCHD compatible equipment. In such a case, play back on
this unit instead.
When motion picture is recorded in iFrame format
≥ You can play back on a Mac (iMovie’11).
≥ It is not compatible with motion pictures recorded in AVCHD format.
≥ It is not always possible to play back motion pictures recorded with the recording
format set to iFrame on iFrame compatible equipment. In such a case, play back on
this unit instead.
32
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 33 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Recording still pictures
1
2
3
Change the mode to
.
Open the LCD monitor.
Press the
button halfway.
(For Auto Focus only)
Focus indication:
A Focus indication:
± (The white lamp flashes.): Focusing
¥ (The green lamp lights up.): When in focus
No mark: When focusing is unsuccessful.
B Focus area (area inside brackets)


4
Press the
button fully.
≥ If you set the Optical Image Stabilizer function (l 50) to
([MODE1]), then the Image
Stabilizer function will be more effective. ( MEGA (MEGA Optical Image Stabilizer) will be
displayed when the
button is pressed halfway.)
≥ In dark environments, the video light will turn on.
≥ Using a flash or tripod is recommended when recording still pictures in dark places
because the shutter speed becomes slow.
≥ You can also take a picture just by touching the subject to focus. (Touch Shutter: l 54)
≥ To print a picture, save the picture to the SD card (l 109) and print using a PC or a printer.
33
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 34 ページ
2011年12月28日 水曜日 午前10時21分
∫ About the screen indications in Still Picture Recording
R3000
Still picture operation indicator (l 138)
R3000
6.1M
MEGA
Size of still pictures (l 70)
MEGA optical image stabilizer (l 33)
AF assist lamp (l 73)
ßj
MEGA
Remaining number of still pictures
≥ Flashes in red when [0] appears.
Optical Image Stabilizer (l 50)
ß
6.1M
Flash (l 58)
Flash level (l 58)
Red-eye Reduction (l 58)
≥ Screen display will disappear when no
touch operation is performed for a
specific period of time. To display it
again, touch the screen.
≥ It will be constantly displayed when the
remaining number of still pictures that
can be recorded becomes 200 or less.
∫ About the focus indication
≥ The focus indication indicates the status of the Auto Focus.
≥ The focus indication does not appear in Manual Focus Mode.
≥ The focus indication does not appear or has difficulty focusing in the following cases.
j When close subjects and far subjects are included in the same scene
j When the scene is dark
j When there is a bright part in the scene
j When the scene is filled with only horizontal lines
∫ About the focusing area
When there is a contrasting object ahead or behind the subject in the focus area, the subject
may not be focused. If so, move the contrasting object out of the focus area.
≥ Focus area is not displayed in the following conditions.
j When the Intelligent Auto Mode (Portrait) is used
j When AF/AE tracking is used
j When the Extra Optical Zoom is used
j When the unit determines that the AF assist lamp is necessary
Recording still pictures in Motion Picture Recording Mode
You can record still pictures even in Motion Picture Recording Mode.
¬ Change the mode to
Press the
.
button fully (press to the bottom) to take the picture.
≥ It is possible to record still pictures while recording motion pictures.
(Simultaneous recording)
≥ Remaining number of recordable pictures is displayed while still pictures are
being recorded.
≥ Built-in flash, Red-eye Reduction, self-timer (l 58) do not work.
≥ While recording motion pictures or during the PRE-REC operation, image quality is
different from ordinary still pictures so that motion picture recording takes preference over
still picture recording.
≥ If simultaneous recording is used while recording a motion picture, the recordable time
remaining will shorten. If the unit is turned off or the mode switch operated, the recordable
time remaining may lengthen.
34
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 35 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Intelligent Auto Mode
The following modes (appropriate for the condition) are set just by pointing the unit to what
you want to record.
/MANUAL
Intelligent auto/Manual button
Press this button to switch Intelligent Auto
Mode/Manual Mode.
≥ Please refer to page 74 for details about
Manual Mode.
Mode
Effect
Portrait
Faces are detected and focused automatically, and the brightness
is adjusted so it is recorded clearly.
Scenery
The whole landscape will be recorded vividly without whiting out
the background sky, which may be very bright.
*1
Spotlight
Very bright object is recorded clearly.
*1
Low light
It can record very clearly even in a dark room or twilight.
*2
Night portrait
A subject and the background are recorded with near real-life
brightness.
*2
Night scenery You can record night scenery vividly by slowing the shutter speed.
*2
Macro
This allows recording at very close proximity to the object of
recording.
*1
Normal
In modes other than those described above, the contrast is
adjusted to give a clear picture.
*2
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
≥ Depending on the recording conditions, the unit may not enter the desired mode.
≥ In the Portrait, Spotlight, or Low Light Mode, the face will be surrounded by a white frame
when detected. In the Portrait Mode, a subject that is bigger and close to center of the
screen will be surrounded by an orange frame. (l 66)
≥ Using a tripod is recommended in Night Portrait and Night Scenery Mode.
≥ Faces cannot be detected depending on the recording conditions, such as when faces are
of certain sizes or at certain tilts or when digital zoom is used.
35
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 36 ページ
2011年12月28日 水曜日 午前10時21分
∫ Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Auto White Balance and Auto Focus operate
and automatically adjust the color balance and focusing.
Depending on the brightness of the subject etc., the aperture and shutter speed are
automatically adjusted for an optimum brightness.
≥ Color balance and focus may not be adjusted automatically depending on light sources or
scenes. If so, manually adjust these settings. (l 75, 77)
Automatic White Balance
The illustration shows the range over which Automatic White Balance functions.
1) The effective range of Automatic White Balance
10 000K
9 000K
adjustment on this unit
8 000K
2) Blue sky
7 000K
3) Cloudy sky (rain)
6 000K
4) Sunlight
5 000K
5)
5) White fluorescent lamp
1)
4 000K
6) Halogen light bulb
7) Incandescent light bulb
6)
3 000K
8) Sunrise or sunset
7)
9) Candlelight
If the Automatic White Balance is not functioning normally,
2 000K 8)
adjust the White Balance manually. (l 75)
Auto Focus
2)
3)
4)
9)
The unit focuses automatically.
≥ Auto Focus does not work correctly in the following
situations. Record pictures in the Manual Focus Mode. (l 77)
j Recording distant and close-up objects at the same time
j Recording a subject behind dirty or dusty window
j Recording a subject that is surrounded by objects with glossy surfaces or by highly
reflective objects
36
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 37 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Motion picture/Still picture playback
1
2
3
Change the mode to
.
ALL
Touch the play mode select icon A.
(l 27)
HC-V700

Select the still picture B or the recording
format of the motion picture C you wish
to play back.

HC-V700M
Select the media type D and then select
the still picture B or the recording format
of the motion picture C you wish to play
back.



≥ Touch [ENTER].
≥ Icon is displayed in the thumbnail display when the item for motion picture is touched.
(
,
,
,
,
and
)
≥
is displayed in the 1080/60p scenes and
is displayed in the side-by-side scenes
when [ALL AVCHD] is touched.
4
Touch the scene or the still picture to be
played back.
≥ It will switch to the screen displaying
and thumbnail
scroll lever E when no operation is performed for
approximately 5 seconds in the thumbnail display screen.

For details about deleting, refer to page 93.
≥ To display the next (previous) page:
j Slide the thumbnail display upward (downward) while touching it.
j Touch
(up) /
(down) on the thumbnail scroll lever.
37
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 38 ページ
5
2011年12月28日 水曜日 午前10時21分
Select the playback operation by touching the operation icon.
F Operation icon
0h01m30s
≥ Operation icons and screen display will disappear
when no touch operation is performed for a specific
period of time. To display them again, touch the
screen.
≥ It will be played back in 2D only or 3D only when slide
show is played back connected to the 3D compatible
TV. It will play back in 2D if the still picture at the start
of the slide show is 2D (3D still pictures are converted
to 2D still pictures and played back), and it will play
back in 3D if it is 3D (2D still pictures are converted to
3D still pictures and played back).

Motion picture playback
1/;:
6:
5:
∫:
Playback/Pause
Rewind playback
Fast forward playback
Stops the playback and shows
the thumbnails.
Still picture playback
1/;:
2;:
;1:
∫:
Slide show (playback of the still
pictures in numerical order)
start/pause.
Plays back the previous picture.
Plays back the next picture.
Stops the playback and shows
the thumbnails.
∫ Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the
following order if the zoom lever is operated to
side or
side.
20 scenes () 9 scenes () 1 scene () Highlight & Time Frame
Index* (l 82)
* Highlight & Time Frame Index can only set in Motion Picture
Playback Mode.
≥ 9 scenes display returns if the unit is turned off or the mode is changed.
≥ By displaying in 1 scene or touching and holding the thumbnail in the 20 scenes or 9
scenes display, recording date and time are displayed when playing back motion pictures,
and recording date and file number when playing back still pictures.
∫ Speaker volume adjustment
Operate the volume lever to adjust the
speaker volume during Motion Picture
Playback Mode.
Towards “r”:
Increases the volume
Towards “s”:
Decreases the volume
≥ Sound will be heard only during normal playback.
38
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 39 ページ
2011年12月28日 水曜日 午前10時21分
≥ If pause play is continued for approx. 5 minutes, the screen returns to the thumbnails.
≥ The elapsed time for playback indication will be reset to 0h00m00s each scene.
≥ When played back with [ALL AVCHD] selected, the screen may become black momentarily
at the time the scene switches.
Motion picture compatibility
≥ This unit is based on AVCHD Progressive/AVCHD format/MPEG-4 AVC file format.
AVCHD Progressive format
≥ Video signal for the AVCHD Progressive that can be played back with this unit is
1920k1080/60p.
≥ This unit may degrade or not play back motion pictures recorded or created on other
products, and other products may degrade or not play back motion pictures recorded
on this unit, even if the products support AVCHD Progressive.
AVCHD format
≥ Video signals for the AVCHD that can be played back with this unit are
1920k1080/60i,1920k1080/24p and 1440k1080/60i.
≥ This unit may degrade or not play back motion pictures recorded or created on other
products, and other products may degrade or not play back motion pictures recorded
on this unit, even if the products support AVCHD.
iFrame format
≥ Video signals for the iFrame that can be played back with this unit are 960k540/30p.
≥ Motion pictures recorded in AVCHD and iFrame are not compatible with each other.
≥ This unit may degrade or not play back motion pictures recorded or created on other
products, and other products may degrade or not play back motion pictures recorded
on this unit, even if the products support iFrame.
MP4 format
≥ Only the MP4 (640k360/30p) created on this unit can be played back.
≥ The other products may degrade or not play back motion pictures created on this unit,
even if the products support MP4.
Still picture compatibility
≥ This unit is compliant with the unified standard DCF (Design rule for Camera File
system) established by JEITA (Japan Electronics and Information Technology
Industries Association).
≥ The file formats of still pictures supported by this unit are MPO and JPEG. (Not all
MPO and JPEG formatted files will be played back.)
≥ This unit may degrade or not play back still pictures recorded or created on other
products and other products may degrade or not play back still pictures recorded on
this unit.
39
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 40 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Using the menu screen
≥ Touch
1
(left side)/
Touch
MENU
(right side) of
.
on the Touch Menu to display
MENU
. (l 27)
4
Touch the desired item to enter
the setting.
5
Touch [EXIT] to exit the menu
setting.
MENU
2
Touch the top menu A.
∫ About
3
Touch the submenu B.
≥ Next (previous) page is displayed by
touching
/
.
40
VQT3Y41
guide display
After touching
, touching the submenus
and items will cause function descriptions
and settings confirmation messages to
appear.
≥ After the messages have been displayed,
the guide display is canceled.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 41 ページ
2011年12月28日 水曜日 午前10時21分
Basic
Using the Setup Menu
≥ The items displayed differ depending on the position or settings of the mode switch.
Select the menu.
MENU
: [SETUP] # desired setting
[5 SECONDS]/[ON]
[DISPLAY]
Set the display method for the screen information display.
[5 SECONDS]:
Information is displayed on the screen for 5 seconds after starting the
recording mode, starting to playback, or touching the screen.
[ON]:
Constantly displayed.
[CLOCK SET]
Please refer to page 28.
[SET WORLD TIME]
It is possible to display and record the time at the travel destination by selecting your home
region and the travel destination.
1
Touch [SET WORLD TIME].
≥ If the clock is not set, adjust the clock to the current time. (l 28)
≥ When the [HOME] (your home region) is not set, the message appears. Touch [ENTER]
and proceed to Step 3.
2 (Only when setting your home region)
Touch [HOME].
≥ Touch [ENTER].
3
(Only when setting your home region)
Touch
/
to select your home

region and touch [ENTER].
≥ Touch [DAYLIGHT SAVING] to set daylight
saving time.
appears and the
summer time setting is turned on; the time
difference from GMT is set forward by one
hour. Touch [DAYLIGHT SAVING] again to
return to the normal time setting.
4 (Only when setting the region of your travel
destination)

A The current time
B The time difference from GMT
(Greenwich Mean Time)
Touch [DESTINATION].
≥ Touch [ENTER].
41
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 42 ページ
2011年12月28日 水曜日 午前10時21分
≥ When the home region is set for the first time, the screen for selecting home/travel
destination appears after setting the home region successively. If the home region has
already been set once, execute the menu operation for Step 1.
5
(Only when setting the region of your travel
destination)
Touch
/
to select your travel

destination and touch [ENTER].

≥ Touch [DAYLIGHT SAVING] to set daylight
saving time.
appears and the
summer time setting is turned on. The travel
destination time and time difference from
the home region time are set forward by one
hour. Touch [DAYLIGHT SAVING] again to
return to the normal time setting.
≥ Close the setting by touching [EXIT].
appears and the time of the travel destination is
indicated.
C The local time at the selected
travel destination
D The time difference between
the travel destination and the
home region
To return the display to the home setting
Set the home region using Step 1 to 3, and close the setting by touching [EXIT].
≥ If you cannot find your travel destination in the area shown on the screen, set it by using
the time difference from your home region.
[DATE/TIME]
[DATE]/[D/T]/[OFF]
It is possible to change the date and time display mode.
[DATE FORMAT]
[Y/M/D]/[M/D/Y]/[D/M/Y]
It is possible to change the date format.
[ZOOM/REC DISPLAY]
[ON]/[OFF]
You can set the display method of the zoom button icons ( T / W ) and recording button
icon (
).
[ON]:
Constantly displayed.
[OFF]:
Icons will disappear after approx. 5 seconds without any touch operation.
[O.I.S. LOCK DISPLAY]
[ON]/[OFF]
Set the display method for the O.I.S. lock icon (
).
[ON]:
Constantly displayed.
[OFF]:
Icons will disappear after approx. 5 seconds without any touch operation.
42
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 43 ページ
[EXT. DISPLAY]
2011年12月28日 水曜日 午前10時21分
[SIMPLE]/[DETAIL]/[OFF]
Please refer to page 102.
[ECONOMY (BATT)]
[ON]/[OFF]
When about 5 minutes have passed without any operation, this unit automatically turns off to
save battery life.
≥ This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in
following cases:
j Using the AC adaptor*
j Using the USB cable for PC etc.
j PRE-REC is used
j During playback of the slide show
* When [ECONOMY (AC)] is activeted, this unit automatically turns off.
[ECONOMY (AC)]
[ON]/[OFF]
When about 30 minutes have passed without any operation while connecting AC adaptor
with this unit, this unit automatically turns off.
≥ This unit will not automatically turn off even if [ECONOMY (AC)] is set to [ON] in following
cases:
j Using the USB cable for PC etc.
j PRE-REC is used
j During playback of the slide show
[QUICK POWER ON]
[ON]/[OFF]
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to
or
.
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the quick power on mode, the zoom magnification becomes approx. 1k.
[QUICK START]
[ON]/[OFF]
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick Start Standby Mode about 70% of the power used in recording pause
mode is being consumed, so the recording time will be reduced.
≥ HC-V700
Quick Start will not work if there is no SD card inserted.
≥ HC-V700M
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥ Change the mode to
or
.
1
Set [QUICK START] to [ON].
43
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 44 ページ
2
2011年12月28日 水曜日 午前10時21分
Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start standby mode.
≥ The lens cover does not close.
3

Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.

≥ Quick Start Standby Mode is canceled if
j about 5 minutes have elapsed
j mode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (l 43)/[ECONOMY (AC)] (l 43), close the LCD monitor once and open it again.
≥ Turn the unit off using the power button.
[ALERT SOUND]
/
/[OFF]
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
(Volume low)/
(Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 141)
[SELECT OPERATION ICONS]
You can change the operation icons to display in the Touch Menu.
Register 3 favorite operation icons.
≥ The default settings are,
(Fade),
(PRE-REC) and
(Video Light) for Motion
Picture Recording Mode, and
(Built-in flash),
(Self-timer) and
(Backlight
Compensation) for Still Picture Recording Mode.
1
2
3
Touch [SELECT OPERATION ICONS].
Touch the operation icon you would like to change to cancel the setting.
Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4
Touch [ENTER].
≥ For details about the function of each operation icon, refer to page 55.
44
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 45 ページ
[POWER LCD]
A
2011年12月28日 水曜日 午前10時21分
/ +2 / +1 / 0 / -1
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
+2
A
(Makes even brighter)/ +1 (Makes brighter)/ 0 (Normal)/ -1 (Makes less bright)/
*(Automatic adjustment)
* It is not displayed in the Manual Mode or in the Playback Mode.
≥ When the AC adaptor is in use, the LCD monitor is set to +1 automatically.
≥ Recordable time with the battery is shortened when the LCD is made brighter.
[LCD SET]
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1
2
3
4
Touch [LCD SET].
Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
Touch
/
to adjust settings.
Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
[AV MULTI]
[COMPONENT]/[AV OUT]
Please refer to page 103.
[COMPONENT OUT]
[1080i]/[480i]
Please refer to page 103.
[HDMI RESOLUTION]
[AUTO]/[1080p]/[1080i]/[480p]
Please refer to page 103.
[VIERA Link]
[ON]/[OFF]
Please refer to page 104.
[TV ASPECT]
[16:9]/[4:3]
Please refer to page 102.
[3D PLAYBACK]
[AUTO]/[2D]
Please refer to page 106.
45
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 46 ページ
2011年12月28日 水曜日 午前10時21分
[INITIAL SET]
Set to [YES] for changing the menu settings back to the default condition.
≥ Settings for [MEDIA SELECT]*, [CLOCK SET] and [LANGUAGE] will not be changed.
* For users who have HC-V700 , this menu is not displayed.
[Auto Cursor Position]
[ON]/[OFF]
The entered character is confirmed in approx. 1 second after character input, and the cursor
is moved to the right.
It makes the input easy without moving the cursor when characters on the same key are to
be entered again.
≥ Character input screen is displayed in following conditions:
j When registering [FACE RECOG.]. (l 63)
j When setting [TITLE SETUP] for the Highlight Playback. (l 90)
[NUMBER RESET]
Set the file number of the iFrame and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001. (l 135)
≥ To reset the folder number, format the SD card and built-in memory, and then perform
[NUMBER RESET].
≥ Please be aware that if a medium is formatted, then all the data recorded on the medium
will be erased and cannot be restored. Back up important data on a PC, DVD disc etc.
(l 112, 125)
HC-V700
[FORMAT CARD]
Please be aware that if a medium is formatted, then all the data recorded on the medium will
be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 112,
125)
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. (l 153)
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
Use this unit to format media.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
46
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 47 ページ
2011年12月28日 水曜日 午前10時21分
HC-V700M
[FORMAT MEDIA]
Please be aware that if a medium is formatted, then all the data recorded on the medium will
be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 112,
125)
1
2
Touch [FORMAT MEDIA].
Touch [SD CARD] or [Built-inMemory].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. (l 153)
≥ Perform a physical formatting of the built-in memory when this unit is to be disposed/
transferred. (l 150)
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
HC-V700
[CARD STATUS]
The used space and remaining recordable time of the SD card can be checked.
≥ When the mode switch is set to
, remaining recordable time for the selected recording
mode is displayed.
≥ Touch [EXIT] to close the indication.
≥ The SD card requires some space to store information and manage system files, so the
actual usable space is slightly less than the indicated value. The usable space is generally
calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are
expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated
value of the capacity appears to be smaller.
HC-V700M
[MEDIA STATUS]
The used space and remaining recordable time of the SD card and built-in memory can be
checked.
≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory.
≥ When the mode switch is set to
, remaining recordable time for the selected recording
mode is displayed.
≥ Touch [EXIT] to close the indication.
47
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 48 ページ
2011年12月28日 水曜日 午前10時21分
≥ The SD card or built-in memory requires some space to store information and manage
system files, so the actual usable space is slightly less than the indicated value. The
usable SD card/built-in memory space is generally calculated as 1 GB=1,000,000,000
bytes. The capacities of this unit, PCs and software are expressed as
1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the
capacity appears to be smaller.
[DEMO MODE]
[ON]/[OFF]
This item is used to start the unit demonstration.
(Only when the mode is at the
or
position)
If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted
and while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is canceled. However if no operations take
place for approx. 10 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
[O.I.S. DEMO]
This item is used to start the Optical Image Stabilizer demo.
(Only when the mode is at the
position)
Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be canceled.
[LANGUAGE]
You can select the language on the screen display and the menu screen.
48
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 49 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
Using the zoom
Zoom lever/Zoom button icons
T
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
W
T
T
6 W
W

A Zoom bar
≥ Maximum zoom ratio for recording motion pictures can be set with [ZOOM MODE]. (l 62)
≥ You can also perform zoom operation by simply touching the LCD monitor. (Touch Zoom:
l 52)
∫ About the Zoom bar
Zoom bar is displayed during the zoom operation.
W
T


B Optical Zoom
C Motion Picture Recording Mode: i.Zoom/Digital zoom (blue)
Still Picture Recording Mode: Extra Optical Zoom (blue)
∫ About the zoom speed
The zoom speed will be faster in the order of zoom lever, zoom button icon, and then touch
zoom.
≥ The zoom speed varies depending on the range over which the zoom lever is moved.
≥ The zoom operation using the zoom button icons or touch zoom will be performed at a
constant speed respectively.
Zoom ratio during the still picture recording mode
The zoom ratio can be expanded up to 50k without degrading the picture quality for the still
picture recording mode. (Extra Optical Zoom)
≥ Extra optical zoom ratio varies depending on the setting of [PICTURE SIZE] and [ASPECT
RATIO]. (l 70, 71)
≥ If you take your finger off the zoom lever during zoom operation, the operation sound may
be recorded. When returning the zoom lever to the original position, move it quietly.
≥ When the zoom magnification is at its maximum, the subjects are focused at about 1.5 m
(4.9 feet) or more.
≥ When the zoom magnification is 1k, this unit can focus on a subject approx. 3 cm (1.2q)
away from the lens.
49
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 50 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
Image Stabilizer Function
Use the image stabilizer to reduce the effects of shake during recording.
This unit is equipped with Hybrid Optical Image Stabilizer.
Hybrid Optical Image Stabilizer is a hybrid of optical and electrical image stabilizer.
Optical image stabilizer button
O.I.S.
Press the button to turn optical image stabilizer
on/off.
(Motion Picture Recording Mode)
/
#
(setting canceled)
≥ When [HYBRID O.I.S.] is [ON],
is
displayed. When [OFF],
is displayed.
≥ When recording with a tripod in Motion Picture
Recording Mode, we recommend that you set the
image stabilizer off.
(Still Picture Recording Mode)
/
#
(setting canceled)
≥ When [O.I.S.] is [MODE1],
When [O.I.S.] is [MODE2],
is displayed.
is displayed.
∫ Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
MENU
: [RECORD SETUP] # [HYBRID O.I.S.] # [ON] or [OFF]
When set to [ON], you can further improve image stabilization for recording while walking, or
holding the unit and recording a distant subject with zoom.
≥ This function’s default setting is [ON].
(Still Picture Recording Mode)
MENU
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
[MODE1]:
The function works all the time.
[MODE2]:
The function works when the
button is pressed. We
recommend using this mode when you are recording yourself or
recording with a tripod in Still Picture Recording Mode.
≥ Please refer to page 54 for details about the Optical Image Stabilizer Lock.
50
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 51 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
1080/60p recording
This is a recording mode that can record in 1080/60p (1920k1080/60 progressive), which is
the highest picture quality for this unit.
ヒパベパバプパㄑ
1080/60p button
To set to 1080/60p recording mode, press and
hold the button until
is displayed.
≥ To return to normal recording mode, press and
hold the button until
disappears.
It is also possible to set from the menu.
MENU
: [RECORD SETUP] # [REC MODE] # [1080/60p]
≥ Please refer to page 156 for details about approximate recordable time.
51
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 52 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
Recording with the Touch Function
You can record using convenient functions just by the easy operation of touching the screen.
1
2
Touch
(left side)/ (right side) of
on
the Touch Menu to display Touch Function
icons. (l 27)
T
W
Touch the Touch Function icon.
(e.g. AF/AE tracking)
≥ To cancel, touch the Touch Function icon again. (Optical
Image Stabilizer Lock is canceled by releasing the finger
touching
.)
Touch function icons
Touch Zoom

AF/AE tracking
Optical Image Stabilizer Lock*1
Touch Shutter*2
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
≥ An icon is displayed in the
A position when the Touch
Function icon is set.
Touch Zoom
Zoom operation can be performed by touching on the touch zoom bar.
≥ Touch zoom function is useful for making fine adjustments to the zoom magnification.
1
Touch
.
≥ Touch zoom bar appears.
2
Touch and hold the touch zoom bar.
≥ It will zoom to the touched position.
≥ It will zoom in when T side is touched, and zoom out when
W side is touched.
≥ It is also possible to perform zoom operation by touching and
sliding the touch zoom bar toward the T side or the W side.
≥ Please refer to page 49 for details about the zoom speed.
52
VQT3Y41
B Touch zoom bar
C Zoom magnification
position
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 53 ページ
2011年12月28日 水曜日 午前10時21分
AF/AE tracking
It is possible to set the focus and exposure to the subject specified on the touch
screen.
The focus and exposure will keep following the subject automatically even if it moves.
(Dynamic tracking)
1
Touch
.
≥ When [FACE RECOG.] (l 63) is [ON] and a registered face is detected, the target is
automatically locked.
2
Touch the object and lock the target.
≥ When you touch the head of the object, the target
frame on the head gets locked and tracking starts.
≥ Touch the object to be changed again when you want
to change the target.
≥ When the Intelligent Auto Mode is selected, the setting
becomes
(Normal) and touched object is tracked.
Selection becomes
(Portrait) when target frame is
locked on a face. (It may turn to
(Normal) even if
the target is locked on the face when a spotlight is
shining or with a dark scene.)
3
A Target frame
Start recording.
∫ About target frame
≥ When target lock fails, the target frame blinks in red and then disappears. Touch a
characteristic part (color etc.) on the object to lock onto it again.
≥ When the
button is pressed halfway in Still Picture Recording Mode, the focus is set to
the object that is locked. The target frame turns green when it focuses, and the target
cannot be changed.
≥ This function cannot be used in Manual Mode. When Manual Mode is set in Still Picture
Recording Mode, it can only be used with some settings in Scene Mode.
≥ It may track different objects or may not lock the target depending on the recording
conditions such as the following:
j When the object is too large or too small
j When color of the object is similar to the background
j When the scene is dark
≥ When the target is locked in Still Picture Recording Mode, the screen may become dark or
the AF assist lamp may be performed. (l 73)
≥ AF/AE tracking will be canceled in the following cases.
j When the mode is changed
j When the unit is turned off
j When the Scene Mode is set
j Switch to Intelligent Auto Mode/Manual Mode
j Switch to recording of yourself
53
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 54 ページ
2011年12月28日 水曜日 午前10時21分
Optical Image Stabilizer Lock
In Motion Picture Recording Mode, you can further improve optical image stabilization
by touching and holding
. With this function, you can further reduce the effects of
the shake that tends to occur when using zoom.

1
2
Press the Optical Image Stabilizer button to turn the image stabilizer on.
Touch and hold
.
≥ Icon is displayed in A while you are touching
.
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫ To make the display of
disappear
Display of
will not disappear even when no operation is performed for specific time with
the setting at the time of purchase. To make the display of
disappear, change the
setting of the [O.I.S. LOCK DISPLAY].
MENU
: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
[ON]:
Constantly displayed.
[OFF]:
The Icon will disappear after approx. 5 seconds without any touch operation.
≥ Stabilization may not be possible under strong shaking conditions.
≥ To record while moving the unit quickly, release Optical Image Stabilizer Lock.
Touch Shutter
It is possible to focus and record a still picture of a subject that is touched.
1
2
Touch
.
Touch the subject.
≥ Focus area is displayed at the touched position, and a
still picture is recorded.
≥ Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.
≥ This will not operate for recording yourself.
54
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 55 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
Recording functions of operation
icons
Select the operation icons to add different effects to the images to be recorded.
1
Touch
(left side)/ (right side) of
display the operation icons. (l 27)
2
Touch an operation icon.
on the Touch Menu to
PRE-REC
(e.g. PRE-REC)
≥ Select the operation icon again to cancel the function.
Refer to the respective pages for canceling the following
functions.
j Smile Shot (l 57)
j Built-in flash (l 58)
j Self-timer (l 58)
j Guidelines (l 59)
j Video Light (l 60)
≥ The icon is displayed in A when the operation icon is set.
(PRE-REC or self-timer icon is displayed in B.)

PRE-REC
B
Operation icons
Fade*1
Intelligent Exposure*2
Intelligent Contrast Control*1
Backlight Compensation
PRE-REC*1
Tele Macro
Smile Shot*1
Guidelines
Built-in flash*2
Color Night Rec*1
Red-Eye Reduction*2
Video Light
Self-timer*2
*1 Not displayed in Still Picture Recording Mode.
*2 Not displayed in Motion Picture Recording Mode.
≥ The operation icons that are displayed in the Touch Menu can be changed.
([SELECT OPERATION ICONS] l 44)
≥ If you turn off the unit or change the mode to
, PRE-REC, Backlight compensation,
Color night rec, Self-timer and Tele Macro functions are canceled.
≥ If you turn off the unit, the Fade function is canceled.
≥ It is possible to set from the menu.
55
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 56 ページ
2011年12月28日 水曜日 午前10時21分
Fade
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
≥ The Fade setting is canceled when the recording stops.
∫ To select the color for fade in/out
(Fade in)
(Fade out)
MENU : [RECORD SETUP] # [FADE COLOR] #
[WHITE] or [BLACK]
≥ The thumbnails of scenes recorded using fade in become black (or white).
Intelligent Contrast Control
This brightens parts that are in shadow and difficult to see and suppresses white
saturation in bright parts at the same time. Both bright and dark parts can be recorded
clearly.
≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not
be clear.
PRE-REC
This prevents you from missing a shot.
This allows recording of the pictures and sound to start approximately 3 seconds
before the recording start/stop button is pressed.
≥ PRE-REC appears on the screen.
≥ Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is canceled in the following cases.
j If you change the mode
j HC-V700
If you remove the SD card
j HC-V700M
If you remove the SD card while [MEDIA SELECT] is set to [VIDEO/SD CARD]
j If you touch MENU
j If you press the 1080/60p button
j If you turn the unit off
j If you start recording
j After 3 hours have passed
56
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 57 ページ
2011年12月28日 水曜日 午前10時21分
≥ After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 3
seconds before pressing the recording start/stop button cannot be recorded.
≥ Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
Smile Shot
When a smiling face is detected during motion picture recording, the unit
automatically records a still picture.
The icon changes each time it is touched.
([ON]) #
([FACE RECOG.]) # [OFF]
:
The unit records a still picture on detecting a smiling face.
:
Still pictures are only recorded when the face of a person registered using Face
Recognition (l 63) is detected.
[OFF]
Cancel the setting.
≥ During Smile Shot recording, the face detected as a smiling face is surrounded by a green
frame and
/
are red.
≥ Smile Shot recording will not work in the following cases. (
/
will flash)
j HC-V700
When there is no SD card inserted
j HC-V700M
When it is set to [PICTURE/SD CARD] in [MEDIA SELECT], and there is no SD card
inserted
j When it is set to Manual Focus
j When [FACE RECOG.] is set to [OFF], or no one is registered (In
([FACE RECOG.])
only)
≥ Depending on the recording conditions (type of smile, camera shake, etc.), the face of the
subject may not be detected correctly.
≥ The number of recording pixels are 5.8 M (3200k1800) or 2.1 M (1920k1080). (l 70)
≥ When still pictures that have been recorded using the Smile Shot are displayed as
thumbnails, the
appears.
≥ When the AF/AE tracking function is target locking a face of the subject, still pictures are
only recorded if a smiling face is detected on the locked subject. When the Smile Shot
function is set to
([FACE RECOG.]), it will record only if the face of a subject registered
with [FACE RECOG.] is locked as a target.
57
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 58 ページ
2011年12月28日 水曜日 午前10時21分
Built-in flash
When the
button is pressed, the flash is activated and the picture will be
recorded. Use the Built-in flash in order to record still pictures in dark places.
Each time the icon is selected, the indication changes by one setting in the following order:
ß ([ON]) # ßA ([AUTO]) #
([OFF])
≥ The unit automatically determines if the flash is necessary even when it has been set to
by detecting the ambient brightness. (If it determines that the flash is necessary, the
indication lights up in red.)
∫ To adjust the brightness of the flash
MENU
: [PICTURE] # [FLASH LEVEL] # desired setting
ßi:
Much brighter
ßd0:
Normal
ßj:
Less bright
≥ If the ß indication etc. flashes when the
button is pressed halfway, the flash is not
activated.
≥ Do not use with the filter kit (optional) or Conversion Lens (optional) attached.
≥ The available range of the flash is approx. 1 m to 2.5 m (3.3 feet to 8.2 feet) in dark places.
≥ Using the flash fixes a shutter speed to 1/500 or slower.
Red-Eye Reduction
Reduces the phenomena where human eyes become red from flashes.
≥ The flash is activated 2 times.
≥ The red-eye phenomenon tends to appear in certain recording conditions and more with
some people than with others.
≥ When faces are detected in the Intelligent Auto Mode, the Red-Eye Reduction is set to on.
Self-timer
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one setting in the following order:
Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting canceled
≥ When you press the
button, Ø10 or Ø2 flashes for the set period before a still picture
is recorded. After recording, the Self-timer is canceled.
≥ In Auto Focus Mode, if the
button is pressed halfway once and then fully, the lens
focuses on the subject when the button is pressed halfway. If the
button is pressed
fully all at once, the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
58
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 59 ページ
2011年12月28日 水曜日 午前10時21分
≥ Setting the Self-timer to Ø2 is a good way to prevent image shake when the
pressed while using a tripod etc.
button is
Intelligent Exposure
This brightens dark areas so the image can be recorded clearly.
≥ If there are extremely dark parts or the brightness is insufficient, the effect may not be
clear.
Backlight Compensation
This makes the image brighter to prevent darkening of a backlit subject.
Tele Macro
A more impressive image can be obtained by focusing on the object only in close-up
and shading off the background.
≥ The unit can focus on the subject at a distance of approx. 60 cm (24q).
≥ When the Tele Macro is set with the zoom magnification less than 26k in Motion Picture
Recording Mode, it will automatically be set to 26k.
≥ When the aspect ratio is [4:3], [3:2] during the Still Picture Recording Mode and tele macro
is set with the zoom magnification less than 21k, the zoom magnification will automatically
be set to 21k. When the aspect ratio is [16:9], the zoom magnification will be 26k.
≥ The Tele Macro function is canceled automatically when the zoom magnification becomes
lower than 26k in Motion Picture Recording Mode.
≥ Tele Macro function is canceled automatically when the zoom magnification becomes
lower than the sizes below in Still Picture Recording Mode:
j Less than 21k (when the aspect ratio is [4:3] or [3:2])
j Less than 26k (when the aspect ratio is [16:9])
Guidelines
You can check if the image is level while recording or playing back motion pictures
and still pictures. The function can also be used to estimate the balance of the
composition.
It will switch every time the icon is touched.
#
#
# Setting canceled
≥ The guidelines do not appear on the images actually recorded.
∫ Displaying Guidelines at playback
≥ Change the mode to
and touch the play mode select icon. Then, select the
AVCHD scene, or set to [iFrame] or [MP4]. (l 37)
MENU
: [VIDEO SETUP] # [GUIDE LINES] # desired setting
≥ To cancel the Guideline function during playback, set to [OFF].
≥ It cannot be set while in Still Picture Playback Mode.
59
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 60 ページ
2011年12月28日 水曜日 午前10時21分
Color Night Rec
This function allows you to record color images in very low light situations. (Minimum
required illumination: approx. 1 lx)
≥ Recorded scene is seen as if frames were missed.
≥ If set in a bright place, the screen may become washed out for a while.
≥ Bright dots that are usually invisible may be seen, but this is not a malfunction.
≥ Using a tripod is recommended.
≥ In darker areas, Auto Focus may focus a bit slower. This is normal.
Video Light
It is possible to record with illumination even in dark places.
Each time the icon is selected, the indication changes by one setting in the following order.
([ON]) #
([AUTO]) #
([OFF])
:
Always on.
:
:
Turns on/off automatically according to brightness of the surroundings.
Cancel the setting.
≥ When set to
([AUTO]), the video light turns on in Low Light Mode in Intelligent Auto
Mode.
≥ When the video light is in use, the recordable time when using the battery is shortened.
≥ The (approximate) available range of the video Light is approximately up to 1.2 m (3.9 feet).
≥ Using the Color Night Rec function at the same time will make conditions even brighter.
≥ When you take a picture in a dark place in still picture recording mode with the [AF ASSIST
LAMP] set to [AUTO] (l 73), and the video light set to
([AUTO]) or
([OFF]), the
lamp is turned on to make it easier to focus.
≥ Set the video light to
([OFF]) at places where using a light is prohibited.
60
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 61 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
Recording functions of menus
[SCENE MODE]
When you record images in different situations, this mode automatically sets optimum shutter
speeds and apertures.
MENU
: [RECORD SETUP] # [SCENE MODE] # desired setting
[OFF]:
Cancel the setting
5Sports:
To make fast moving scenes less shaky with slow playback
and pause of playback
Portrait:
To make people stand out against the background
Soft Skin:
To makes skin colors appear softer for a more attractive
appearance
Spotlight:
Improved quality when subject is brightly illuminated.
Snow:
Improved image quality when shooting in snowy locations.
Beach:
To make blue in the sea or sky vibrant
Sunset:
To make red in the sunrise or sunset vibrant
Scenery:
For spatial scenery
Fireworks:
To capture the fireworks in the night sky beautifully
Night scenery:
To capture the evening or night scenery beautifully
Low light:
For dark scenes, such as at dusk
(In Motion Picture Recording Mode only)
Night portrait:
To capture a person and the background brightly
(In Still Picture Recording Mode only)
≥ (Sports/Portrait/Soft Skin/Spotlight/Snow/Beach/Sunset/Scenery)
j The shutter speed is 1/8 or more in Still Picture Recording Mode.
≥ (Sunset/Low light)
j The shutter speed is 1/30 or more in Motion Picture Recording Mode.
≥ (Sunset/Scenery/Fireworks/Night scenery)
j Image may get blurry when a close object is recorded.
≥ (Sports)
j During normal playback, the image movement may not look smooth.
j Color and screen brightness may change under indoor lighting.
j If the brightness is insufficient, the Sports Mode does not function. The
flashes.
≥ (Portrait)
j Color and screen brightness may change under indoor lighting.
display
61
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 62 ページ
2011年12月28日 水曜日 午前10時21分
≥ (Soft Skin)
j If the background or anything else in the scene has colors similar to the skin color, they
will also be smoothed.
j If the brightness is insufficient, the effect may not be clear.
j If you record a person in the distance, the face may not be recorded clearly. In this case,
cancel Soft Skin Mode or zoom in on the face (close-up) to record.
≥ (Fireworks)
j The shutter speed is 1/30.
j Image may get washed out when recorded in bright surroundings.
≥ (Night scenery/Night portrait)
j The shutter speed is 1/2 or more in Still Picture Recording Mode.
j Using a tripod is recommended.
≥ (Night portrait)
j The flash is set to [ON].
[ZOOM MODE]
Set the maximum zoom ratio for the Motion Picture Recording Mode.
MENU
: [RECORD SETUP] # [ZOOM MODE] # desired setting
[i.Zoom OFF]:
Up to 26k
[i.Zoom 46k]:
This zoom function allows you to maintain high-definition
picture quality. (Up to 46k)
[D.Zoom 60k]:
Digital zoom (Up to 60k)
[D.Zoom 1500k]:
Digital zoom (Up to 1500k)
≥ The larger the digital zoom magnification, the more the image quality is degraded.
≥ This function cannot be used in Still Picture Recording Mode.
[REC MODE]
Switch the picture quality and recording format of the motion pictures to record.
MENU
: [RECORD SETUP] # [REC MODE] # desired setting
[HA]/[HG]/[HX]/[HE]*1:
Set the recording mode to 1080/60i.
[1080/60p]*2:
Set the recording mode to 1080/60p.
[iFrame]*3:
Set the recording mode to iFrame.
*1 Recording will have higher quality in the order of [HA], [HG], [HX] and [HE].
*2 It can record with highest quality image in this unit.
*3 [iFrame] is a format suitable for Mac (iMovie’11). It is recommended when using a Mac.
62
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 63 ページ
2011年12月28日 水曜日 午前10時21分
≥ Recordable time using the battery. (l 22)
≥ This function’s default setting is [HG] mode.
≥ Please refer to page 156 about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
HC-V700M
[RELAY REC]
It is possible to continuously record motion picture to an SD card when there is no space
available in the built-in memory. (It allows you to record only to SD card from built-in
memory.)
≥ Set [MEDIA SELECT] to [Built-inMemory].
≥ Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/60p]. (l 62)
≥ Insert an SD card.
MENU
: [RECORD SETUP] # [RELAY REC] # [ON]
≥
is displayed on the screen.
will disappear when space in the built-in memory is
gone and the recording to the SD card starts.
≥ Relay Recording can only be performed once.
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE]
into the SD card. (l 98, 110)
≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by
touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after
that.
≥ Still pictures are recorded to the SD card after Relay Recording.
≥
is displayed on the thumbnail display during the playback of a scene that was relayrecorded on the built-in memory.
[FACE RECOG.]
Face Recognition is a function for finding faces that resemble faces which have already been
registered and automatically prioritizing focus and exposure for those faces. This function
makes it possible to keep the face of your loved ones in focus even when they are at the
back or on the end of a line in a group picture.
MENU
: [RECORD SETUP] # [FACE RECOG.] # desired setting
[ON]:
The Face Recognition function is available.
[OFF]:
Cancel the setting.
[SET]:
Face Recognition registration/editing/cancelation.
63
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 64 ページ
2011年12月28日 水曜日 午前10時21分
∫ Registering a face for Face Recognition
MENU
: [RECORD SETUP] # [FACE RECOG.] # [SET] # [SET]
≥ Up to a maximum of 6 people can be registered.
1
Align the person’s face with the guide.
≥ Take a picture of the persons face from the front,
ensuring that their hair does not hide the outline of
their face, their eyes or their eyebrows.
2
Touch [REC] or press the
button fully.
≥ Touch [ENTER].
≥ It may not be possible to register a face depending on
the recording conditions. In this case, try recording the
face again.
3

A Guide
Enter the person’s name.
≥ Touch the text entry icon in the center of the screen
and enter the name.
≥ After entering the name, touch [Enter].

B Text entry icon
Entering text
≥ The characters can be conveniently input without moving the cursor when the [Auto Cursor
Position] is set to [ON]. (l 46)
Icon
[A] etc.
/
[A/a]
Description of operation
Enters a character.
Moves the cursor to left or right.
Switches between [A]/[a] (alphabet) and [&/1] (symbols/numbers).
Enter a space.
[Delete]
Deletes a character.
Deletes the previous character if the cursor is in an empty space.
[Enter]
Ends text entry.
≥ A maximum of 9 characters can be entered.
4
Touch [ENTER] to end registration.
≥ Touch [EXIT].
64
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 65 ページ
2011年12月28日 水曜日 午前10時21分
∫ Changing the information of a registered person
1
Select the menu.
MENU
2
: [RECORD SETUP] # [FACE RECOG.] # [SET] # [EDIT]
Touch the desired item to enter the setting.
≥ Up to 3 face shots can be registered. To additionally register
or to change/delete the registered face shots, touch
or
the face shot.
≥ If you register several face shots of the same person (up to 3
face shots can be registered), each with a different facial
expression or different background, it is more likely that Face Recognition will be
successful.
Change name:
Touch the part displaying the registered name, and change the name.
[PRIORITY]:
Focus and exposure will be set in priority according to the
registration order setting from the first person. Target will be
locked according to the registration order setting from the first
person when AF/AE tracking is active.
≥ To change the registration order, select the person you wish
to change.
1
KEN
2
ANNA
4
3
MARY
5
6
JOE
[FOCUS ICON]:
This changes the focus indication icon (l 33) that appears
during still picture recording. (Only displayed when Face
Recognition is in use.)
≥ Touch the icon you wish to have displayed.
3
Touch [ENTER].
∫ Canceling a registered person
1
Select the menu.
MENU
: [RECORD SETUP] # [FACE RECOG.] # [SET] # [DELETE] or [DELETE ALL]
≥ Touching [DELETE ALL] cancels all the registered people.
2 (When [DELETE] is selected)
Touch the person to cancel.
≥ When touched, the person is selected and
touch again.
≥ Touch [ENTER].
is displayed. To cancel the selected person,
≥ Since Face Recognition searches for faces that resemble the registered faces, there is no
guarantee of positive recognition.
≥ It may not be possible to correctly recognize a person who has been registered due to
differences in facial expression and environment.
≥ Perform the registration again if recognition becomes unstable in cases such as when
facial features change with age.
65
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 66 ページ
2011年12月28日 水曜日 午前10時21分
[NAME DISPLAY]
When a registered person is detected by Face Recognition during recording, the name
registered for that person is displayed.
MENU
: [RECORD SETUP] # [NAME DISPLAY] # desired number
[3]/[2]/[1]/[OFF]
≥ Displayed name will disappear after a while.
≥ It is displayed according to the registration order setting from the first person.
≥ This function is not displayed during recording of yourself or Playback Mode.
[FACE FRAMING]
Detected faces appear with frames.
MENU
: [RECORD SETUP] # [FACE FRAMING] # desired setting
[PRIMARY]:
Only the prioritized face framing is displayed.
[ALL]:
All face detection framings are displayed.
[OFF]:
Cancel the setting.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen
take preference over others. When [FACE RECOG.] is [ON] registered people are given
priority.
∫ Prioritized face framing
Prioritized face framing is displayed as orange frames. Focus and adjustment of brightness
will be performed against the prioritized face framing.
≥ Prioritized face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
≥ Focus will be set to prioritized face framing when the
button is pressed halfway when
recording still pictures. Prioritized face framing will turn to green when the focus is set.
66
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 67 ページ
2011年12月28日 水曜日 午前10時21分
[AUTO SLOW SHTR (2D)]
You can record bright pictures even in dark places by slowing the shutter speed.
≥ Switch to Manual Mode. (l 74)
MENU
: [RECORD SETUP] # [AUTO SLOW SHTR (2D)] # [ON]
≥ The shutter speed is set to 1/30 or more depending on the surrounding brightness.
≥ This function cannot be used when using the 3D Conversion Lens (optional).
≥ This function cannot be used in Still Picture Recording Mode.
≥ When the shutter speed becomes 1/30, the screen may be seen as if frames are missed
and afterimages may appear.
[AUTO SLOW SHTR (3D)]
This auto slow shutter function is only used with the 3D Conversion Lens (optional).
≥ Switch to Manual Mode. (l 74)
MENU
: [RECORD SETUP] # [AUTO SLOW SHTR (3D)] # [ON]
≥ For details, refer to [AUTO SLOW SHTR (2D)].
≥ This function’s default setting is [ON].
≥ When a 3D Conversion Lens is used, the recording scene will become darker. We
recommend setting this function to [ON].
[AGS]
If the unit continues to be tilted upside down from the normal horizontal position while
recording motion pictures, it is automatically put into recording pause.
MENU
: [RECORD SETUP] # [AGS] # [ON]
≥ The AGS function may activate and cause the unit to pause the recording if you are
recording a subject right above or right below you.
67
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 68 ページ
2011年12月28日 水曜日 午前10時21分
[Digital Cinema Color]
Recording motion pictures with more vivid colors, using x.v.Color™ technology.
≥ Switch to Manual Mode. (l 74)
≥ Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/60p]. (l 62)
MENU
: [RECORD SETUP] # [Digital Cinema Color] # [ON]
≥ For more realistic colors, use an HDMI mini cable (optional) with a TV that supports the
x.v.Color™.
≥ When motion pictures recorded while this function is turned [ON] are played back
with a TV not compatible with x.v.Color™, colors may not be reproduced properly.
≥ It is recommended to record with the setting set to [OFF] when playing back the video on
an equipment other than the ones compatible with the x.v.Color™.
≥ x.v.Color™ is a name for devices that are compatible with the xvYCC format, an
international standard for expanded color in motion pictures, and that follow the rules for
signal transmission.
[SHOOTING GUIDE]
Message is displayed when this unit is moved rapidly.
MENU
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.
≥ Set to [OFF] to turn off the message indication.
≥ Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set to [ON].)
[WIND NOISE CANCELER]
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥ Switch to Manual Mode. (l 74)
MENU
: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
≥ This function’s default setting is [ON].
≥ When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and
the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
68
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 69 ページ
2011年12月28日 水曜日 午前10時21分
[ZOOM MIC]
Directivity of the microphone is synchronized with the zoom operation. Sounds near the front
of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
MENU
: [RECORD SETUP] # [ZOOM MIC] # [ON]
[MIC LEVEL]
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
1
Select the menu.
MENU
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]:
[SETr
AGC is activated, and the recording level is adjusted
automatically.
]/[SET]:
The desired recording level can be set.
2
(When [SETr
]/[SET] is selected)
Touch
/
to adjust.
≥ Touch
to activate/disactivate AGC. When AGC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
AGC is disactivated, natural recording can be
performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
3
≥
A Left
B Right
C Microphone input level
Touch [ENTER] to set the microphone input level and then touch [EXIT].
(Microphone input level meter) appears on the screen.
≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in
microphones.
≥ You cannot record with the audio completely muted.
69
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 70 ページ
2011年12月28日 水曜日 午前10時21分
[PICTURE ADJUST]
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ This setting is retained when you change between Motion Picture Recording Mode
and Still Picture Recording Mode.
≥ Switch to Manual Mode. (l 74)
1
Select the menu.
MENU
2
: [RECORD SETUP] # [PICTURE ADJUST]
Touch the desired setting items.
[SHARPNESS]:
Sharpness of the edge
[COLOR]:
Depth of the color of the image
[EXPOSURE]:
Brightness of the image
[WB ADJUST]:
Picture color balance
3
4
Touch
/
to adjust settings.
Touch [ENTER].
≥ Touch [EXIT] to complete the settings.
≥
appears on the screen.
[PICTURE SIZE]
The higher the number of pixels, the higher the clarity of the picture when printing.
MENU
: [PICTURE] # [PICTURE SIZE] # desired setting
≥ The number of recording pixels that can be set changes depending on selected screen
aspect ratio. (l 71)
∫ Picture size and Maximum zoom ratio
Picture size
6.1M
2848k2136
2.3M
1760k1320
0.3M
640k480
6.1M
3024k2016
Aspect ratio
Extra optical zoom (l 49)
–*
4:3
23k
50k
–*
3:2
2.3M
1872k1248
5.8 M
3200k1800
22.9k
26k
16:9
2.1 M
1920k1080
28.1k
* Extra optical zoom cannot be used. The maximum zoom magnification is 21k.
70
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 71 ページ
2011年12月28日 水曜日 午前10時21分
∫ Picture size in Motion Picture Recording Mode
≥ Change the mode to
MENU
.
: [PICTURE] # [PICTURE SIZE] # desired setting
Picture size
5.8 M
3200k1800
2.1 M
1920k1080
Aspect ratio
16:9
≥ This function’s default settings are 6.1M in Still Picture Recording Mode and 5.8 M in Motion
Picture Recording Mode.
≥ Please refer to page 157 for details about the number of recordable pictures.
≥ The recording will become longer depending on the recording pixels.
[ASPECT RATIO]
This allows you to select the aspect ratio of the pictures to suit printing or the playback
method.
MENU
: [PICTURE] # [ASPECT RATIO] # desired setting
[4:3]:
Aspect ratio of 4:3 television
[3:2]:
Aspect ratio of conventional film camera or prints (such as L-size print)
[16:9]:
Aspect ratio of high-definition television, etc.
≥ This function’s default setting is [4:3].
≥ When the aspect ratio is set to [4:3] or [3:2], black bands may appear on the left and right
of the screen.
≥ The edges of still pictures recorded on this unit with a [16:9] aspect ratio may be cut at
printing. Check the printer or photo studio before printing.
71
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 72 ページ
2011年12月28日 水曜日 午前10時21分
[HI-SPEED BURST]
Recording is done continuously at the rate of 60 still pictures per second.
Use this function to record an object with fast movement.
1
Select the menu.
MENU
: [PICTURE] # [HI-SPEED BURST] # [ON]
[ON]:
180 still pictures are recorded continuously at the rate of 60 per second.
The picture size is 2.1 M (1920k1080).
[OFF]:
Cancel the setting.
2
Press the
button.
≥
flashes in red during recording.
≥ First press the
button halfway, then press it fully to set the focus and record. It will
automatically focus if you press fully once, so it is convenient when recording objects
moving back and forth.
3
Touch [Record] or [Delete].
[Record]:
Pictures are stored.
[Delete]:
All pictures are deleted.
4
(When [Record] is selected in Step 3)
Touch [REC ALL] or [SELECT].
[REC ALL]:
All pictures are stored.
[SELECT]:
Pictures are stored by specifying range.
5
(When [SELECT] is selected in Step 4)
Touch the range of pictures that will be stored.
≥ Previous (Next) page is displayed by touching
/
.
* Only select the picture for start point if only 1 picture is
to be stored.
≥ A confirmation message is displayed when [Enter] is
touched after selecting the start point and finish point.
Touch [YES] to store the pictures.
A Start point*
B Finish point
≥ If you turn off the unit or change the mode, this function is canceled.
≥ The maximum number of times you can record on a media is 15.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ Color balance and brightness on the screen may change with some light sources such as
fluorescent lamps.
≥ Image quality is different from ordinary still picture recording.
72
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 73 ページ
2011年12月28日 水曜日 午前10時21分
[AF ASSIST LAMP]
The video light is turned on to make it easier to focus when you are recording in dark places
where it is hard to focus.
≥ Switch to Manual Mode. (l 74)
MENU
: [PICTURE] # [AF ASSIST LAMP] # [AUTO]
≥ Set the video light to
([AUTO]) or
([OFF]). (l 60)
≥ When switching to Intelligent Auto Mode, the setting is fixed to [AUTO] and cannot be
changed.
[SHTR SOUND]
You can add a shutter sound when recording still pictures.
MENU
: [PICTURE] # [SHTR SOUND] # desired setting
:
Volume low
:
Volume high
[OFF]:
Cancel the setting.
≥ No shutter sound is emitted in Motion Picture Recording Mode.
73
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 74 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
Manual recording
≥ The Manual Focus, White Balance, Shutter Speed, Brightness (Iris and Gain)
settings are retained when you change between Motion Picture Recording Mode and
Still Picture Recording Mode.
Press the iA/MANUAL button to switch to Manual Mode.
≥
MNL
appears on the screen.
MNL
/MANUAL
FOCUS

WB
SHTR
IRIS
A manual icons
FOCUS
WB
SHTR
IRIS
74
VQT3Y41
Focus (l 77)
White Balance (l 75)
Manual Shutter Speed (l 76)
Iris Adjustment (l 76)
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 75 ページ
2011年12月28日 水曜日 午前10時21分
White Balance
Automatic White Balance function may not reproduce natural colors depending on the
scenes or lighting conditions. If so, you can adjust the White Balance manually.
≥ Press the iA/MANUAL button to switch to Manual Mode. (l 74)
1
2
Touch [WB].
FOCUS
Touch
SHTR
MNL
/
to select White Balance Mode.
≥ Select the optimal mode by confirming the color on the
screen.
≥ Touch [WB] to select the mode.
Icon
AWB
WB
IRIS
Mode/Recording conditions
Auto White Balance adjustment
Sunny mode:
Outdoors, under a clear sky
Cloudy mode:
Outdoors, under cloudy sky
Indoor mode 1:
Incandescent light, video lights like in the studio, etc.
Indoor mode 2:
Color fluorescent lamps, sodium lamps in gymnasiums etc.
Manual adjustment mode:
≥ Mercury-vapor lamps, sodium lamps, some fluorescent lights
≥ Lights used for wedding receptions at hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.
≥ To return to auto setting, set to
AWB
or press the iA/MANUAL button again.
∫ To set the White Balance manually
1 Select
, fill the screen with a white subject.
2 Touch and set the blinking
.
≥ When the screen turns black instantly and the
display
stops flashing and then lights constantly, the setting is
complete.
≥ If the
display continues flashing, the White Balance
cannot be set. In this case, use other White Balance modes.
MNL
FOCUS
WB
SHTR
IRIS
≥ When the
display flashes, the Manual White Balance previously adjusted is stored.
Whenever recording conditions change, re-set the White Balance.
≥ When setting both the White Balance and the iris/gain, set the white balance first.
≥ AWB is not displayed on the screen when AWB is being set.
75
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 76 ページ
2011年12月28日 水曜日 午前10時21分
Manual shutter speed/iris adjustment
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥ Press the iA/MANUAL button to switch to Manual Mode. (l 74)
1
2
Touch [SHTR] or [IRIS].
Touch
/
to adjust settings.
≥ Touch [SHTR]/[IRIS] to end the adjustment.
SHTR : Shutter speed:
1/60 to 1/8000
≥ If [AUTO SLOW SHTR (2D)] is set to [ON], the shutter speed will be set between 1/30 and
1/8000.
≥ The shutter speed closer to 1/8000 is faster.
≥ The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.
IRIS : Iris/Gain value:
CLOSE !# (F16 to F2.0) !# OPEN !# (0dB to 18dB)
≥ Value closer to CLOSE darkens the image.
≥ Value closer to 18dB brighten the image.
≥ When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
≥ To return to auto setting, press the iA/MANUAL button again.
≥ When setting both the shutter speed and the iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
≥ When the shutter speed is set lower than 1/15 in the Still Picture Recording Mode, using a
tripod is recommended. Also, White Balance cannot be set. The shutter speed will be set
to 1/30 when the unit is turned on again or when the Quick Start is performed.
≥ You may see a band of light around an object that is shining very bright, or highly reflective.
≥ During normal playback, image movement may not look smooth.
≥ If you record an extremely bright object or record under indoor lighting, color and screen
brightness may change or a horizontal line may appear on the screen. In this case, record
in the Intelligent Auto Mode or set the shutter speed to 1/60 in areas where the power
supply frequency is 60 Hz, or 1/100 in areas of 50 Hz.
≥ Brightness of the image displayed on the LCD monitor may be different from brightness of
the image actually recorded during the still picture recording mode. Confirm the image on
the playback screen after recording.
Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the screen increases.
≥ Depending on the zoom magnification, there are iris values that are not displayed.
76
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 77 ページ
2011年12月28日 水曜日 午前10時21分
Manual Focus adjustment
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥ Press the iA/MANUAL button to switch to Manual Mode. (l 74)
1
(When MF assist function is used)
Select the menu.
MENU
: [RECORD SETUP] # [MF ASSIST] # [ON]
≥ Touch
2
3
to display the Manual icon.
Touch [FOCUS].
Touch [MF] to change to Manual Focus.
≥ MF appears on the screen.
4
Adjust the focus by touching
MF / MF .
MNL
FOCUS
WB
MF :
To focus on a close subject
MF :
To focus on a faraway subject
SHTR
IRIS
MF
MF
MF
The in-focus area is displayed in blue. The normal
A Part displayed in blue
screen returns approximately 2 seconds after you finish
bringing the subject into focus.
≥ Touch [FOCUS] to end the adjustment.
≥ When [MF ASSIST] is [OFF], the blue area is not displayed.
≥ To restore Auto Focus, touch [AF] in Step 3 or press the iA/MANUAL button again.
≥ The blue display does not appear on the images actually recorded.
77
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 78 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Recording)
Recording 3D image
With the 3D Conversion Lens (optional) attached, you can record life-like and powerful 3D
image. To view 3D image, a television that supports 3D is required.
To attach the 3D Conversion Lens to this unit, a step up ring supplied with the 3D
Conversion Lens is required.
3D image
The image is an
illustration.
≥ In the unit, the recordable 3D images are side-by-side format (2-screen structure).
≥ Since the 3D image is recorded in side-by-side format, the recorded 3D image is not of
high definition picture quality.
∫ Recording 3D image
For details on how to attach and how to adjust the attachment position of the 3D Conversion
Lens, please read the operating instructions for the 3D Conversion Lens.
When using for the first time, be sure to adjust the 3D Conversion Lens attachment position.
≥ Turn off the unit.
≥ Change the mode to
or
.
1
Attach the step up ring to the 3D Conversion Lens.
≥ Securely slide the lock lever of the 3D Conversion Lens to the LOCK position.
≥ Attach the Lens front cap supplied with the 3D Conversion Lens.
2
Attach the 3D Conversion Lens to the unit.
≥ Tighten the attachment screw of the step up ring by rotating to LOCK.
≥ Attach the 3D Conversion Lens securely so it will not tilt or move.
3
Turn on the unit.
≥ Turn on with the unit in a horizontal state.
≥ The 3D Conversion Lens adjustment mode screen will appear automatically after
performing the initial setting.
≥ If the 3D Conversion Lens adjustment mode screen does not appear automatically,
set from the menu.
([SETUP] # [3D CONV. LENS SETUP])
≥ If the unit is turned on with the USB cable still connected, the USB connection will take
priority.
78
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 79 ページ
2011年12月28日 水曜日 午前10時21分
4
Adjust the lens attachment part following the instructions on the
screen.
5
Touch [EXIT] to end the adjustment.
≥ When re-attaching the 3D Conversion Lens or after an impact etc., it is
recommended that you perform the adjustment again.
6
(When recording motion picture)
Press the recording start/stop button to start recording. (l 31)
≥ Start recording after removing the Lens front cap.
(When recording still picture)
button to take the picture. (l 33)
≥ 3D appears on the screen.
≥ It is possible to record still pictures while recording motion pictures. (Simultaneous
recording)
≥ The number of recording pixels are 2.1 M (1920k1080). (l 70)
Press the
To ensure that the 3D image can be safely viewed, pay attention to the following
points when recording.
≥ Where possible, record with the unit in a horizontal state.
≥ Do not get too close to the subject. (record from a distance of at least 1.2 m (3.9 feet).)
≥ When moving the unit as you record, move it slowly.
≥ Try to hold the unit as steady as possible when recording while riding in a vehicle or
walking.
≥ Use of a tripod is recommended for recording with a stable picture.
≥ [ECONOMY (BATT)]/[ECONOMY (AC)] will not work while you adjust the 3D Conversion
Lens attachment position.
≥ When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW
SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l 67)
≥ While 3D recording if moving the unit fast, the message is more likely to appear.
≥ The LCD monitor on this unit will not display in 3D.
≥ If the unit is turned on in the shade, etc., the screen may appear to be blue. In such a case,
removing the lens cap will return the screen to normal.
79
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 80 ページ
2011年12月28日 水曜日 午前10時21分
∫ Functions that cannot be used during 3D recording
When recording with the 3D Conversion Lens, you cannot use certain functions.
Functions not available during 3D recording
(Button/lever operations)
j Zoom in/out function*1
j Hybrid Optical Image Stabilizer*2
j Intelligent Auto Mode
(Night portrait and Macro)
j 1080/60p recording*3
j Manual Focus
(Setup menu)
j Quick power on
j Quick Start
j Initial set
(Motion picture recording functions)
j iFrame ([REC MODE])
j Smile Shot
j Video light
j Tele Macro
j Face Recognition
j Zoom Microphone
(Still picture recording functions)
j Picture size
j Aspect ratio
j Built-in flash
j Flash level
j Red-Eye Reduction
j Video light
j Night portrait in Scene Mode
j AF ASSIST LAMP
*1 The zoom position is fixed, and the zoom operation is disabled.
*2 The Optical Image Stabilizer
and Optical Image Stabilizer Lock
can be used.
*3 The 1080/60p recording mode is canceled, and the motion picture is recorded with 1080/
60i picture quality.
80
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 81 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
Playback Operations
Motion picture playback using operation icon
For details on the basic playback operations, refer to page 37.
Playback operation
Playback display
Operating steps
Fast forward/
rewind playback
Touch 5 during playback to fast
forward.
(Touch 6 to rewind.)
≥ The fast forward/rewind speed increases
if you touch 5/6 again. (The display
on the screen changes from 5 to
.)
≥ Normal playback is restored when you
touch
.
Skip playback
(to the start of a
scene)
Touch the LCD monitor and slide from
right to left (from left to right) during
playback
Slow-motion
Playback
With the playback paused, continue
touching
.
(
is for slow rewind playback)
Playback is slow while touching.
≥ Normal playback is restored when you
touch
.
≥ When Slow-motion pictures are played
back in reverse, they will be shown
continuously at approximately 2/3rd the
speed of normal playback (intervals of
0.5 seconds).
≥ Slow-motion Playback of the scenes in
iFrame or the scenes saved as MP4 will
be shown in intervals of 1 second.
During Playback
During Pause
Frame-by-frame
playback
The motion picture
is advanced one
frame at a time.
With the playback paused, touch
.
(Touch
to advance the frames one at
a time in the reverse direction.)
≥ Normal playback is restored when you
touch
.
≥ When the frames are advanced one at a
time in the reverse direction, they will be
shown in intervals of 0.5 seconds.
≥ Frame-by-frame playback of the scenes
in iFrame or the scenes saved as MP4
will be shown in intervals of 1 second.
81
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 82 ページ
Playback operation
Playback display
During Playback
Direct playback
2011年12月28日 水曜日 午前10時21分
Operating steps
Touch the Direct playback bar or slide
it while touching.
≥ The playback pauses temporarily and
skips to the position touched or slid to
while touching.
≥ Playback will start by releasing your
touching or sliding finger.
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
3D still pictures will be saved for the scenes recorded in 3D, and 2D still pictures will be
saved for the scenes recorded in 2D.
( 2.1 M (1920k1080) still pictures will be recorded for the AVCHD scenes and iFrame scenes,
and 0.2 M (640k360) still pictures will be recorded for the MP4 scenes.)
Press the
button fully at the location to be saved as a still picture
during the playback.
≥ It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
≥ Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Highlight & Time Frame Index
An image of one scene is displayed as a thumbnail at set search condition.
Scene can be played back from any midway point of the scene you wish to see.
≥ Operate the zoom lever to
side and change over the
thumbnail display to Highlight & Time Frame Index.
(l 38)
1
Touch
.
≥ To display the next (previous) page:
j Slide the thumbnail display upward (downward) while touching it.
j Touch
(up) /
(down) on the thumbnail scroll lever. (l 37)
2
Touch the desired search condition.
[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]*
* This cannot be set while playing back the scenes in iFrame or the scenes saved as MP4.
≥ When select [FACE], it will select the portion for which Face Recognition was performed
from the scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
≥ A portion judged to be clearly recorded will be detected and displayed in thumbnail if you
select [HIGHLIGHT].
82
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 83 ページ
3
2011年12月28日 水曜日 午前10時21分
(When [MINUTES] is selected)
Touch
/
to set the time.
≥ It can be set up to a maximum of 60 minutes.
≥ Touch [ENTER].
4
Touch the thumbnail to be played back.
≥ Next (Previous) thumbnail can be displayed by touching
/
.
Repeat Playback
Playback of the first scene starts after playback of the last scene finishes.
MENU
: [VIDEO SETUP] # [REPEAT PLAY] # [ON]
The
indication appears on the full screen views.
≥ All the scenes are played back repeatedly. (When playing back motion pictures by date, all
the scenes on the selected date are played back repeatedly.)
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
MENU
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
If playback of a motion picture is stopped,
scene.
appears on the thumbnail view of the stopped
≥ The memorized resume position is cleared if you turn off the unit or change the mode. (The
setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback
(Playback zoom)
You can zoom in by touching a still picture during playback.
1
Touch and hold the part you wish to zoom in on during still picture
playback.
≥ It will display enlarged in order of normal display (k1) # k2 # k4. Touch and hold the
screen to zoom in from the normal display k1 to k2. Touch the screen to zoom in from k2
to k4.
≥ The still picture is zoomed in on, centering on the part you touched.
83
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 84 ページ
2
2011年12月28日 水曜日 午前10時21分
Move to the zoomed in position by
touching
/ / /
or slide while
touching the screen.
≥ The location of the zoom displays for about 1 second
when zooming in (zooming out) or moving the
displayed location.
≥ The more picture is enlarged, the more its quality
deteriorates.
A Displayed location of
the zoom
Zooming out from the zoomed still picture
Touch
≥ Touch
to zoom out. (k4 # k2 # k1)
to return to normal playback (k1).
≥ You can also perform zoom operations using the zoom lever.
≥ Playback zoom cannot be performed for the still pictures recorded in 3D. It will perform the
playback zoom after switching to 2D playback when the zoom operation is performed.
84
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 85 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
Various playback functions
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1
Touch the date select icon. (l 27)

ALL
A Date select icon
2
Touch the playback date.
The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3
Touch the scene or the still picture to be played back.
≥ Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode
is changed.
≥ Even if AVCHD scenes are recorded on the same day, they are grouped separately when
the number of scenes exceeds 99. –1, –2... is added after the recording date displayed on
the screen.
≥ Even if AVCHD scenes are recorded on the same day, they are grouped separately
whenever the 1080/60p recording, 1080/60i recording, or side-by-side recording are
switched. –1, –2 ... are added after the date displayed on the date list.
≥ Even if iFrame scenes are recorded on the same day, they are grouped separately in the
following cases. –1, –2... is added after the recording date displayed on the screen.
j When the number of scenes exceeds 99
j When [NUMBER RESET] is performed
≥ Even if still pictures are recorded on the same day, they are grouped separately in the
following cases.
j When the number of still pictures exceeds 999
j When pictures are recorded in Hi-Speed Burst Shooting Mode (
is indicated after the
date in the list by date).
j When [NUMBER RESET] is performed
≥
is displayed after the date in the list by date for the still pictures created from the motion
picture. (l 82)
85
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 86 ページ
2011年12月28日 水曜日 午前10時21分
Highlight Playback
Part that was recognized as clearly recorded is extracted from a long recording, and it can be
played back in a short time with effects and music added. It can be saved as a single scene.
It is also possible to create an original Highlight Playback by checking your favorite scenes
and setting up to extract those scenes.
≥ Highlight Playback is not possible for the scenes in iFrame or the scenes saved as MP4.
1
Touch
. (l 27)
ALL
2
Touch the desired effect.
[POP]:
Recommended for enjoyable situations such as party scene.
[NATURAL]:
Recommended for scenery.
[CLASSICAL]:
Recommended for slow moving scenes.
[DYNAMIC]:
Recommended for fast moving scene such as sports scenes.
[CUSTOM]:
Set the combination of the effect and the music. (l 87)
≥ The scenes matching the effect will be extracted and displayed in the thumbnail view.
≥ Effects such as fade, slow-motion, still (pause), or digest playback are inserted.
≥ It will be played back with the date of last recording. To change the settings, refer to page
88.
3
Touch
in the thumbnail view.
≥ To change the settings, refer to page 88.
4
Select the playback operation. (l 37, 81)
≥ When the playback is finished or stopped, the screen to select [SAVE] (l 90) or [SELECT
AGAIN], [EXIT] is displayed. Touch the desired item.
≥ Playing back of all the scenes returns if the unit is turned off or the mode is changed.
≥ Slow-motion Playback and Frame-by-frame Playback are not possible.
86
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 87 ページ
2011年12月28日 水曜日 午前10時21分
Setting up the custom effect
It is possible to enjoy the Highlight Playback with your favorite effect by setting up the
combination of an image effect and music.
1
Touch [CUSTOM].
2
3
Touch [EFFECT SETUP] or [MUSIC SELECT].
(When [EFFECT SETUP] is selected)
Touch the desired effect.
≥ When the [EFFECT SETUP] is changed,
[MUSIC SELECT] will be set the same as the
[EFFECT SETUP]. (To set the [EFFECT SETUP] and
[MUSIC SELECT] to different settings, change [MUSIC SELECT] after setting [EFFECT
SETUP].)
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥ When [EFFECT SETUP] is set to [NONE], you will be able to select [NO MUSIC]. When
[NO MUSIC] is selected, the audio recorded at the time of shooting is played back.
≥ To adjust the volume of music during playback or audio testing, operate the volume lever.
(l 38)
4
Touch [ENTER].
To test the music audio
Touch [START].
≥ Touch the other music option to change the music to
be tested.
≥ When you touch [STOP], the music playback stops.
87
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 88 ページ
2011年12月28日 水曜日 午前10時21分
Playing back with the settings changed
Touch [SET] to select the item to change.
[SCENE SETUP]:
Select the scene or date to
be played back.
[FAVORITE SCENE SETUP]:
Set up the favorite scenes
(l 89)
[FAVORITE SCENE PLAY]:
Set up if the favorite scenes are to be included in the
Highlight Playback or not. (l 89)
[PRIORITY SETUP]:
Select the target to give priority to play back. (l 90)
[PLAYBACK TIME]:
Select the time to play back. (l 90)
[TITLE SETUP]:
Select the title sheet to be displayed at the beginning,
and enter the title. (l 90)
∫ Scene setting
1
(Only when Highlight Playback is started from [ALL AVCHD])
Touch the recording format of the scene to be played back.
[1080/60p]/[1080/60i]/[SbS 3D]
2
3
Touch [SELECT DATE] or [SELECT SCENES].
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥ A maximum of 7 days can be selected.
≥ When touched, the date is selected and surrounded by
red. Touch the date again to cancel the operation.
(When [SELECT SCENES] is selected)
Touch the scenes to be played back.
≥ Up to 99 scenes can be selected in succession.
≥ When touched, the scene is selected and
is
displayed. Touch the scene again to cancel the operation.
4
Touch [Enter]/[ENTER].
88
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 89 ページ
2011年12月28日 水曜日 午前10時21分
∫ Checking the favorite scenes
1
Touch the scenes to be played back.
2
Touch [Add] and add the favorite part.
0h00m15s
≥ Total of 4 seconds before and after touching the [Add] will be
added as favorite.
≥ Number of favorite scenes that can be added are 1 to 14.
(Number of scenes that can be added differs depending on the
scenes selected)
≥ Favorite check display (A) is displayed in orange, and
favorite check display B is displayed on the slide bar.
≥ To cancel the favorite, play back to the position checked as
favorite, and touch [Cancel].
≥ It is convenient to use Slow-motion Playback and Frame-byframe Playback. (l 81)
3
Touch
and stop the playback.
≥ It will return to the thumbnail display screen and ¡ is
displayed on the scenes added as favorite scenes.

0h00m15s

≥ All the scenes checked as favorite may not be played back depending on the Playback
time setting. (l 90)
To clear the favorite scenes from the thumbnail display
1
Touch [Reset].
2
Touch [RESET ALL] or [RESET SELECTED].
≥ The check on all the favorite scenes will be cleared
when [RESET ALL] is selected.
3
4
(When [RESET SELECTED] is selected in step
2)
Touch the scene to be cleared.
Touch [YES].
∫ Playing back the favorite scenes
Touch [ON] or [OFF].
[ON]:
Include the scenes added in the [FAVORITE SCENE SETUP] into the Highlight
Playback
[OFF]:
Do not include the scenes added in the [FAVORITE SCENE SETUP] into the
Highlight Playback
89
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 90 ページ
2011年12月28日 水曜日 午前10時21分
∫ Priority setting
1
Touch [FACE] or [FACE RECOG.].
≥ If you touch [FACE], any detected face, including the face of person registered for Face
Recognition, is given priority on playback.
2
(When [FACE RECOG.] is selected)
Touch a face to specify.
1
2
3
4
5
6
KEN
ANNA
MARY
≥ You can specify up to 6 faces, which are to be played back
in priority.
JOE
≥ When touched, the registered face is selected and
surrounded by red. Touch the registered face again to
cancel the operation.
≥ Touch [ENTER]. When a single face is specified, the name registered for that face is
displayed. When multiple faces are specified, the number of faces is displayed.
∫ Playback time setting
Touch the playback time.
≥ The playback time of [AUTO] is a maximum of approx.
5 minutes.
≥ Playback time may become shorter than the setting, or it
may not even be played back if the part recognized as
clearly recorded is short.
∫ Setting up the title
1
Touch
/
to select your favorite title sheet.
[NONE]/[PICTURE 1]/[PICTURE 2]/[PICTURE 3]/[PICTURE 4]
≥ Title and date will not be displayed when [NONE] is selected.
2 Touch [TITLE].
3 Enter the title.
≥ Input method is same operation as for the face recognition. (l 63)
≥ Touch [Enter] after entering the title.
≥ A maximum of 18 characters can be entered.
4
Touch [ENTER] to end registration.
≥ The date of the first scene of the Highlight Playback will be displayed as the date.
≥ The entered title will be cleared when the power is turned off or the Highlight Playback is
finished.
Saving the Highlight Playback
The scenes put together as a Highlight Playback can be saved as a single scene.
The scenes recorded on the SD card can be saved on the SD card.
HC-V700M
The scenes recorded in the built-in memory can be saved in the built-in memory.
1 Stop the playback of the Highlight Playback or wait until the playback of the
Highlight Playback is finished.
2 Touch [SAVE].
90
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 91 ページ
3
2011年12月28日 水曜日 午前10時21分
Select the format to save.
[QUALITY (AVCHD)]:
It will be saved in high definition image quality.
[COMPATIBILITY (MP4)]:
It will be saved in image quality (640k360/30p)
appropriate for playing back on a PC or uploading to
Internet.
≥ When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/60p are converted to
1080/60i (picture quality [HA] of [REC MODE]) and saved.
≥ It will be saved in [HA] picture quality when [1080/60i] is selected in [SCENE SETUP] and
scene with different [REC MODE] ([HA]/[HG]/[HX]/[HE]) is selected.
4
Touch [YES].
≥ Playback operation is not possible while playing back the scenes to be saved.
5
(When saved on the SD card)
Touch [EXIT].
HC-V700M
(When saved in the built-in memory)
Touch [COPY] or [EXIT].
≥ The Highlight Playback saved in the built-in memory can be copied to the SD card. To copy
to the SD card, select [COPY].
≥ Operate according to the message and touch [EXIT] at the end.
≥
is displayed on the thumbnail of the scenes saved by the Highlight Playback.
Changing the playback settings and playing back the
slide show
1
Touch
. (l 27)
ALL
2
(Only when you would like to change the settings)
Touch [SET] to select the item to change.
[DATE SETUP]:
Select the date to be played back.
[PLAYBACK SETUP]:
Select to play back in 3D (2D still pictures are converted to 3D
still pictures and played back) or play back in 2D (3D still pictures
are converted to 2D still pictures and played back).
[SLIDE INTERVAL]:
Select the interval between still pictures at playback.
[EFFECT SETUP]:
Select the effect for playback.
[MUSIC SELECT]:
Select the music to be played on playback.
91
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 92 ページ
3
2011年12月28日 水曜日 午前10時21分
(When [DATE SETUP] is selected)
Touch the playback date.
(When [PLAYBACK SETUP] is selected)
Touch [3D (NO EFFECT)] or [2D].
(When [SLIDE INTERVAL] is selected)
Touch the interval of playback for the slide show.
[SHORT]:
Approx. 1 second
[NORMAL]:
Approx. 5 seconds
[LONG]:
Approx. 15 seconds
(When [EFFECT SETUP] is selected)
Touch the desired effect.
≥ When [EFFECT SETUP] is changed, [MUSIC SELECT] will
be set the same as [EFFECT SETUP]. (To set [EFFECT
SETUP] and [MUSIC SELECT] to different settings, change
[MUSIC SELECT] after setting [EFFECT SETUP].)
≥ [SLIDE INTERVAL] cannot be set, when [EFFECT SETUP] is set.
(When [MUSIC SELECT] is selected)
Touch the desired sound.
≥ To adjust the volume of music during playback of the slide
show or audio testing, operate the volume lever. (l 38)
≥ Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
≥ Touch the other music option to change the music to be tested.
≥ When you touch [STOP], the music playback stops.
4
5
Touch [START].
Select the playback operation. (l 37)
≥ When the playback is finished or stopped, the screen to select [REPLAY], [SELECT
AGAIN] or [EXIT] is displayed. Touch the desired item.
92
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 93 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
Deleting scenes/still pictures
Deleted scenes/still pictures cannot be restored, so perform appropriate
confirmation of the contents before proceeding with deletion.
¬ Change the mode to
.
∫ To delete the scene or still picture being played back
Touch
while scenes or still pictures to be
deleted are being played back.
0h01m15s
∫ To delete scenes or still pictures from the thumbnail display
≥ Switch to the thumbnail display of the scenes or still pictures to delete. (l 37)
≥ The Touch Menu will disappear after approximately 5 seconds, and
is displayed.
1
Touch
. (l 37)
≥ When the thumbnail display is 1 scene display or Highlight
& Time Frame Index, the scene or still picture being
displayed is deleted.
2
Touch [ALL SCENES], [MULTI] or [SINGLE].
≥ All the scenes or still pictures displayed as thumbnails will
be deleted by selecting [ALL SCENES].
(In case of playing back scenes or still pictures by date, all
the scenes or still pictures on the selected date will be
deleted.)
≥ Protected scenes/still pictures cannot be deleted.
3
(When [MULTI] is selected in Step 2)
Touch the scene/still picture to be deleted.
≥ When touched, the scene/still picture is selected and the
indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
(When [SINGLE] is selected in Step 2)
Touch the scene/still picture to be deleted.
≥ Touched scene or still picture is deleted.
4
(When [MULTI] is selected in Step 2)
Touch [Delete].
≥ To continuously delete other scenes/still pictures, repeat Steps 3-4.
93
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 94 ページ
2011年12月28日 水曜日 午前10時21分
When you stop deleting halfway:
Touch [CANCEL] while deleting.
≥ The scenes or still pictures that have already been deleted when the deletion is canceled
cannot be restored.
To complete editing:
Touch [Return].
≥ You can also delete scenes by touching MENU , selecting [EDIT SCENE] # [DELETE] #
[ALL SCENES], [MULTI] or [SINGLE].
≥ You can also delete still pictures by touching MENU , selecting [PICT. SETUP] # [DELETE]
# [ALL SCENES], [MULTI] or [SINGLE].
≥ During Highlight Playback or Disc Playback when connected to a DVD burner (optional),
scenes/still pictures cannot be deleted.
≥ Scenes that cannot be played back (the thumbnails are displayed as
) cannot be
deleted.
≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still
pictures.
≥ If you delete scenes recorded on other products or still pictures conforming to DCF
standard with this unit, all the data related to the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are deleted, a still picture
(other than JPEG) that cannot be played back on this unit may be erased.
Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
≥ Change the mode to
and touch the play mode select icon. Then, select the
AVCHD scene. (l 37)
1
Select the menu.
MENU
2
3
:[EDIT SCENE] # [SECTION DELETE]
Touch the scene with a part to delete.
Set the section to delete by touching and
sliding the top and bottom section selection
buttons
.
0h00m15s
≥ It is convenient to use Slow-motion Playback and Frame-byframe Playback. (l 81)
4
5
Touch [ENTER].
Confirm (play back) the scene after editing by touching [YES].
≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
94
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 95 ページ
7
2011年12月28日 水曜日 午前10時21分
Touch [ENTER].
≥ Repeat steps 2-7 to continuously delete parts from other scenes.
≥ Deleting of part cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when middle part of a scene is deleted.
≥ The relay information is deleted when part of a scene that was relay recorded is deleted,
making it impossible to perform the Relay scene combining. (l 98)
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene.
Any unwanted parts in the scene can be deleted after dividing.
≥ Change the mode to
and touch the play mode select icon. Then, select the
AVCHD scene. (l 37)
1
Select the menu.
MENU
2
3
: [EDIT SCENE] # [DIVIDE] # [SET]
Touch the scene to be divided.
Touch
to set the dividing point.
≥ It is convenient to use Slow-motion Playback and Frame-byframe Playback. (l 81)
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and repeat Steps 2-3.
4
0h00m15s
Touch [Return] to complete dividing.
≥ Unwanted parts can be deleted. (l 93)
To delete all the divided points
MENU
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if you are playing back a disc with a DVD burner (optional)
connected, or if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.
≥ If personal information in the divided scenes is deleted, the personal information is deleted
when the divided scenes are canceled.
95
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 96 ページ
2011年12月28日 水曜日 午前10時21分
Dividing a scene to partially delete (iFrame/MP4)
Divide the iFrame scene or the scene saved as MP4, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes deleted by dividing cannot be restored.
≥ Change the mode to
and touch the play mode select icon. Then, set to [iFrame]
or [MP4]. (l 37)
1
Select the menu.
MENU
2
3
: [EDIT SCENE] # [SPLIT&DELETE]
Touch the scene to be divided.
Touch
to set the dividing point.
≥ It is convenient to use Slow-motion Playback and Frame-byframe Playback. (l 81)
≥ Set the dividing point so there will be 2 seconds or more for
the part for deletion, and 3 seconds or more for the part to be
kept.
4
5
0h00m15s
Touch the part for deletion.
Touch [YES] and confirm (play back) the part for deletion.
≥ A confirmation message appears when [NO] is touched. Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Touch [YES].
≥ To continue dividing and deleting other scenes, repeat Steps 2-7.
To complete editing
Touch [Return].
≥ It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
96
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 97 ページ
2011年12月28日 水曜日 午前10時21分
Deleting personal information
Deletes Face Recognition information from scenes in which faces were recognized.
≥ Change the mode to
and touch the play mode select icon. Then, select the
AVCHD scene. (l 37)
≥ Face Recognition information is not recorded in the scenes recorded in iFrame or
the scenes saved as MP4.
1
Select the menu.
MENU
2
: [VIDEO SETUP] # [DELETE PERSONAL INFO]
Touch the desired scenes with personal information to be deleted.
≥
appears at scenes for which faces were recognized.
will change to
touched. Touch the
(red) again to cancel the operation.
≥ Up to 99 scenes can be selected in succession.
3
(red) when
Touch [Delete].
≥ To continuously delete other personal information, repeat Steps 2-3.
≥ Touch [Return] to complete the settings.
When you stop deleting halfway
Touch [CANCEL] while deleting personal information.
≥ The personal information that has already been deleted when the deletion is canceled
cannot be restored.
≥ During Disc Playback when connected to a DVD burner (optional), personal information
cannot be deleted.
Protecting scenes/still pictures
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
≥ Change the mode to
.
1
Select the menu.
MENU
2
: [VIDEO SETUP] or [PICT. SETUP] # [SCENE PROTECT]
Touch the scene/still picture to be protected.
≥ When touched, the scene/still picture is selected and the
indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
≥ Touch [Return] to complete the settings.
≥ When the Disc Playback is selected while a DVD burner (optional) is connected, scenes/
still pictures cannot be protected.
97
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 98 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
Relay scene combining [HC-V700M]
You can combine the relayed scene (l 63) in the built-in memory and the continued
scene in the SD card to be one into the SD card.
Relay-recorded scene
Relay scene combining
A Built-in memory
B SD card
C Range of Relay Recording
≥ Change the mode to
AVCHD scene. (l 37)
1
2
and touch the play mode select icon. Then, select the
Insert the SD card that was used for Relay Recording.
Select the menu.
MENU
3
: [EDIT SCENE] # [RELAY SCENE COMBINE]
When the confirmation message appears, touch [YES].
≥ Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are
not deleted.)
4
Touch [EXIT] when the relay scene combining complete message is
displayed.
≥ The thumbnail view of the SD card is indicated.
≥ Relay Recording information will be deleted when the relay scenes are combined, and
Relay Recording will be possible again.
≥ When the relayed scenes in the built-in memory or SD card are deleted, combining of the
relayed scenes will not be possible.
98
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 99 ページ
2011年12月28日 水曜日 午前10時21分
To cancel relay information
MENU
: [EDIT SCENE] # [RELAY INFO CANCEL]
≥ When the relay information is canceled, combining of the relayed scenes will not be
possible anymore.
Combining of the relay scene cannot be performed if the available space on the SD card
is less than the volume of the relayed scene in the built-in memory. It is recommended to
combine the relay scene using a DVD burner or the HD Writer AE 4.0.
≥ When the Disc Playback is selected while a DVD burner (optional) is connected, you
cannot combine relay scenes or cancel relay information.
≥ The personal information of the relayed scene in the built-in memory or SD card is deleted,
the personal information of the combined relay scene is deleted.
99
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 100 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible with the terminals.
Image quality may vary with the connected terminals.
A High quality
1 HDMI terminal
2 Component
terminal
3 Video terminal
≥ Use the AV multi cable (supplied) or HDMI mini cable (optional) and check the output
settings. (l 103)
≥ HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high
definition TV and then play back the recorded high definition images, you can enjoy them
in high resolution with high quality sound.
1
Connect this unit to a TV.
A HDMI mini cable
(optional)
≥ Be sure to connect to the
HDMI terminal.
B AV multi cable
(supplied)
AV MULTI
AV MULTI
100
VQT3Y41
Picture quality
1 High definition images
when connecting to
HDMI terminal
2 High definition images
when connecting to
component terminal
compatible with 1080i
Standard images when
connecting to
component terminal
compatible with 480i
3 Standard images when
connecting to video
terminal
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 101 ページ
2011年12月28日 水曜日 午前10時21分
≥ Check that the plugs are inserted as far as they go.
≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional).
≥ Do not use any other AV multi cables except the supplied one.
≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable
is not required.
≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug
of the AV multi cable. Image may not display when the component terminal plug is
connected simultaneously.
2
Select the video input on the TV.
≥ Example:
Select the [HDMI] channel with a HDMI mini cable.
Select the [Component] or [Video 2] channel with an AV multi cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
3
Change the mode to
Cables
to play back.
Reference items
A HDMI mini cable (optional)
≥ Connecting with a HDMI mini cable (l 103)
≥ Playback using VIERA Link™ (l 104)
B AV multi cable (supplied)
≥ Connecting with the AV multi cable (l 103)
≥ When the AV multi cable is connected to this unit, the setup screen of the AV multi
destination is displayed on the screen of this unit. Touch either [COMPONENT] or [AV
OUT] in accordance with the terminal connecting to the TV. (l 103)
≥ If the HDMI mini cable and AV multi cable are connected at the same time, output will be
prioritized in order of the HDMI mini cable, AV multi cable.
101
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 102 ページ
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
MENU
: [SETUP] # [TV ASPECT] # [4:3]
Example of images with a [16:9] aspect
ratio on a regular TV (4:3)
2011年12月28日 水曜日 午前10時21分
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
MENU : [SETUP] # [EXT. DISPLAY] #
desired setting
[SIMPLE]*:
Information partially
displayed
[DETAIL]:
All information displayed
[OFF]:
Not displayed
[TV ASPECT] setting
[16:9]
[4:3]
* This setting is only available in recording
mode.
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
Refer to the following support site for information about Panasonic TVs with an SD
card slot for playing back your pictures.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the recording mode.
≥ For details on how to play back, please read the operating instructions for the TV.
102
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 103 ページ
2011年12月28日 水曜日 午前10時21分
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
MENU
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
j When the 1080/60p recording mode is turned on/off during Motion Picture Recording
Mode
j When you touch the play mode select icon to select [1080/60p], and then touch [ENTER]
during Playback Mode.
j When the play mode selection is set to
in the Playback Mode, and it is switched
between the 3D still picture and the 2D still picture.
j When the 1080/60p, 1080/60i, or side-by-side scenes are switched.
Connecting with the AV multi cable
Select the desired setting of AV multi connector output.
MENU
: [SETUP] # [AV MULTI] # desired setting
[COMPONENT]:
When connecting to the component terminal
[AV OUT]:
When connecting to the video terminal
Changing the component output setting
MENU
: [SETUP] # [COMPONENT OUT] # desired setting
[1080i]:
When connecting to the component terminal on the TV compatible with
1080i.
(Playback is in high definition quality.)
[480i]:
When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
≥ Set [VIDEO LIGHT] to [OFF] when recording with the TV connected to the component
terminal to confirm the recording. (l 60)
103
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 104 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
Playback using VIERA Link™
What is the VIERA Link (HDAVI Control™)?
≥ VIERA Link™ is a new name for EZ Sync™.
≥ This function allows you to use your remote control for the Panasonic TV for easy
operations when this unit has been connected to a VIERA Link compatible device using
a HDMI mini cable (optional) for automatic linked operations. (Not all operations are
possible.)
≥ VIERA Link is a unique Panasonic function built on a HDMI control function using the
standard HDMI CEC (Consumer Electronics Control) specification. Linked operations
with HDMI CEC compatible devices made by other companies are not guaranteed.
When using devices made by other companies that are compatible with VIERA Link,
refer to the operating instructions for the respective devices.
≥ This unit is compatible with VIERA Link Ver.5. VIERA Link Ver.5 is the newest
Panasonic version and is also compatible with existing Panasonic VIERA Link devices.
(As of Nov. 2011)
¬ Change the mode to
1
.
Select the menu.
MENU
: [SETUP] # [VIERA Link] # [ON]
≥ If you are not using VIERA Link, set to [OFF].
2
Connect this unit to a Panasonic TV compatible with VIERA Link
with a HDMI mini cable.


HDMI IN
A HDMI mini cable (optional)
B Panasonic TV compatible with VIERA Link
≥ It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there
are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the operating instructions of the
TV for how to set etc.)
≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional).
104
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 105 ページ
3
2011年12月28日 水曜日 午前10時21分
Operate with the remote control for the TV.
1)
2)




1)
Press the button up, down, left or right to select a scene or still picture to be played back,
and then press the button in the center to set it.
2) Activate the operation icons that are displayed on TV screen with the remote control for
the TV.
A Operation icons
B Display operation icons
C Cancel operation icons
D Display/Cancel operation icons
≥ The following operations are available by pressing the color buttons on the remote control.
j Green: Switching the number of scenes/still pictures in thumbnail display
(9 thumbnails > 20 thumbnails > 9 thumbnails...)
Zoom in on still picture
j Yellow: Deleting scenes/still pictures
j Red: Zoom out from still picture/Adjusting 3D effect of the 3D image
∫ Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also turns off.
Automatic input switching:
If you connect with a HDMI mini cable and then turn on this unit, the input channel on the TV
automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn
on automatically (if [Set] has been selected for the TV’s [Power on link] setting).
≥ Depending on the HDMI terminal on the TV, the input channel may not switch
automatically. In this case, use the remote control for the TV to switch the input channel.
≥ If you are unsure whether or not the TV and AV amplifier you are using are compatible with
VIERA Link, read the operating instructions for the devices.
≥ Available linked operations between this unit and a Panasonic TV is different depending on
the types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the
operating instructions of the TV for the operations that support on the TV.
≥ Operation is not possible with a cable that is not based on the HDMI standard.
105
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 106 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
3D image playback
Connect the unit to a 3D compatible television and play back scene/still picture recorded in
3D to enjoy life-like and powerful 3D image.
¬ Change the mode to
and touch the play mode select icon. Then, select the
. (l 37)
AVCHD scene, or set to
1
Select the menu.
MENU
: [SETUP] # [3D PLAYBACK] # [AUTO]
[AUTO]:
The scene/still picture recorded in 3D is played back in accordance with the
settings on the TV.
[2D]:
The scene/still picture recorded in 3D is played back in 2D irrespective of the
settings on the TV.
2
Connect this unit to the 3D compatible television using a HDMI mini
cable (optional) or an AV multi cable (supplied). (l 100)
3
Play back scenes or still picture recorded in 3D.
≥
is displayed in the thumbnail display at playback for the scenes recorded in 3D.
is displayed in the thumbnail display at playback for the still pictures recorded in 3D.
≥ Playback switches between 3D image and 2D image automatically.
≥ If your television does not switch to a 3D image, make the necessary settings on the TV.
(For further details, please read the operating instructions for the TV.)
≥ Set to [2D] when using a television that is not 3D compatible.
≥ If you feel tired, uncomfortable or otherwise strange when viewing scenes
recorded in 3D, set to [2D].
106
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 107 ページ
2011年12月28日 水曜日 午前10時21分
≥ You cannot play back 3D image on the LCD monitor of the unit. When you play back
scenes recorded in 3D on the LCD monitor, they will be played back in 2D.
≥ You can also play back scenes recorded in 3D by date. Even if scenes are recorded on the
same day, the unit will display the date separately when switching between 2D and 3D
recordings. (l 85)
≥ When you play back scenes successively, a black screen will appear for a few seconds
between scenes recorded in 3D and scenes recorded in 2D.
≥ When you select a 3D thumbnail, it may take a few seconds for playback to start. After
playback, the thumbnail display may take a few seconds to reappear.
≥ It will play back in 2 screens when connected to the TV not compatible with 3D using an AV
multi cable (supplied).
≥ Depending on the 3D-compatible television used, switching to 3D mode may be slow and
you may not be able to watch the first scene. In this case, use the pause button.
≥ When viewing the 3D image, your eyes may become tired if you are too close to the
television screen.
107
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 108 ページ
2011年12月28日 水曜日 午前10時21分
Advanced (Playback)
Converting and playing back 2D
images as 3D
You can connect this unit to 3D compatible TV, convert the scene and still pictures recorded
in 2D (conventional image) to 3D and play back.
¬ Change the mode to
and touch the play mode select icon. Then, select the
AVCHD scene, or set to
. (l 37)
MENU
: [VIDEO SETUP] or [PICT. SETUP]# [CONV. 2D TO 3D] # [ON]
[ON]:
Convert and play back the images recorded in 2D as 3D images.
(3D scenes are played back as 3D)
[OFF]:
Recorded images are played back as it was recorded.
Setting with the Touch Menu
1
Touch
.
≥ This is not displayed when playing back the iFrame or MP4
scenes.
2
MENU
Play back the scene or the still picture by touching it.
≥ Setting for the [3D PLAYBACK] is not possible when [CONV. 2D TO 3D] is set to [ON].
≥ [CONV. 2D TO 3D] setting takes priority regardless of the [3D PLAYBACK] setting.
≥ Highlight Playback cannot be converted to 3D image.
≥ Scenes/still pictures converted to 3D images cannot be saved as 3D images.
∫ Adjusting 3D effect of the 3D image
It is possible to adjust the disparity of the scenes and still pictures playing back in 3D for better view.
1
2
Play back the scenes or still pictures recorded in 3D.
Touch
.
≥ Playback disparity adjustment bar is displayed while displaying in 3D.
3
Touch
/
to adjust settings.
≥ Playback disparity adjustment bar will disappear after approx.
5 seconds without any touch operation.
≥ The setting is canceled in following cases:
j If you stop playback
j If you turn the unit off
j If you change the mode
≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange while
playing back or adjusting.
108
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 109 ページ
2011年12月28日 水曜日 午前10時21分
Copy/Dubbing
Copying between SD card and Built-in
Memory [HC-V700M]
Motion pictures or still pictures recorded with this unit can be copied between an SD card
inserted in this unit and a built-in memory.
∫ Check the used space of the copy destination
It is possible to check the used space of the SD card or built-in memory by [MEDIA STATUS].
(l 47)
≥ By displaying in 1 scene or touching and holding the thumbnail in the 20 scenes or 9
scenes display, recording date and time can be checked when playing back motion
pictures, and recording date and file number when playing back still pictures.
≥ Depending on the media condition, some remaining capacity of the SD card or built-in
memory may not be used.
≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD
cards following the instruction on the screen. In this case, the last scene copied to an SD
card is automatically divided to fit the space on the SD card.
≥ If you divide the scenes (l 95), and copy by scene selection, it is possible to copy
matching the remaining capacity of the media, or only the necessary parts.
109
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 110 ページ
2011年12月28日 水曜日 午前10時21分
Copying
≥ If there is not much remaining capacity in the SD card, a confirmation message asking to
copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot
be restored.
≥ Refer to page 111 for approximate time for copying.
1
Change the mode to
.
≥ Use a sufficiently charged battery or the AC adaptor.
2
Select the menu.
MENU
: [COPY]
[
]
When copying from the SD card to the built-in memory
[
]
When copying from the built-in memory to the SD card
[
CONVERT FORMAT]
[
[
]
This will convert the recording format and copy from the
built-in memory to the SD card.
This will convert the scene recorded in AVCHD on the builtin memory to MP4 (640k360/30p) and copy to the SD
card.
]
This will convert the scene recorded in 1080/60p on the
built-in memory to 1080/60i and copy to the SD card.
≥ When there are relay-recorded scenes in the built-in memory, a message appears on the
screen. Touch [YES] and copy after combining relay-recorded scenes to the SD card.
(l 98)
3
Touch desired items following the screen display.
≥ It will return to the previous step by touching
.
≥ (When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the
indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
≥ (When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel
the operation.
≥ Up to 99 scenes/still pictures or 99 dates can be set in succession.
≥ If 2 or more SD cards are necessary to copy, change the card following the instructions on
the screen.
4
Touch [EXIT] when the copy complete message is displayed.
≥ The thumbnail view of the copy destination is indicated.
When you stop copying halfway
Touch [CANCEL] while copying.
110
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 111 ページ
2011年12月28日 水曜日 午前10時21分
Approximate time for copying
When copying a recorded motion picture of full 4 GB size:
Approx. 5 minutes to 15 minutes
When performing [
] on a recorded 1080/60p motion picture of full
4 GB size:
Approx. 20 minutes to 30 minutes
When performing [
] on a recorded AVCHD (HA) motion picture of full
4 GB size:
Approx. 30 minutes to 40 minutes
To copy approx. 600 MB still pictures (Picture size 6.1M ):
Approx. 3 minutes to 5 minutes
If you will delete the motion pictures or still pictures after copying is complete, be
sure to play back the motion pictures or still pictures to check that they have been
copied to correctly before deleting.
≥ When the Disc Playback is selected while a DVD burner (optional) is connected, menus
are not displayed.
≥ Depending on the following conditions, the time it takes for copying may be longer.
j The number of recorded scenes is large.
j The temperature of the unit is high.
≥ If some motion pictures or still pictures have already been recorded to the copy destination,
then the same date may be assigned or images may not display by date when the list by
date is selected.
≥ When converting and copying the scenes recorded in AVCHD to an MP4 scene, the scene
exceeding approximately 20 minutes is automatically divided.
≥ Motion pictures that have been recorded on another device may not be copied. Data
recorded on a PC with HD Writer AE 4.0, etc. cannot be copied.
≥ The settings for the copied motion pictures and still pictures will be cleared if the protected
motion pictures or still pictures are copied.
≥ The order in which the scenes or still pictures were copied cannot be changed.
111
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 112 ページ
2011年12月28日 水曜日 午前10時21分
Copy/Dubbing
Connecting a DVD burner to copy to/
play back a disc
Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by
connecting a DVD burner (optional) to this unit using a USB Connection Cable (supplied with
DVD burner). The copied DVD disc can also be played back.
≥ Please read the operating instructions of the DVD burner for how to use it.
≥ 1080/60p scenes can be copied after converting to 1080/60i picture quality or conventional
normal picture quality.
≥ iFrame and MP4 scenes cannot be copied to disc. Copy to PC to make a backup. (l 125)
Preparing for copying/playing back
We recommend using Panasonic DVD burner VW-BN01.
∫ About discs that can be used for copying
Disc type
DVD-RAM
DVD-RW
+RW
/
DVD-R
/
DVD-R DL
/
+R
/
+R DL
Copy*1
≤
≤
≤
Additional copy*2
≤
—
—
Format*3
≤
≤
—
*1 Use a new disc. You can additionally copy only to a DVD-RAM. When you copy to
DVD-RW, DVD-R, DVD-R DL, +RW, +R or +R DL, the disc is automatically finalized to
allow playback on other devices and additional copying will not be possible.
*2 Only DVD-RAM copied with the DVD burner can additionally copy.
*3 Connect this unit and a DVD burner before formatting. If you format a used disc, you can
copy on that disc. Please be aware that if a disc is formatted, then all the data recorded
on the disc will be erased. (l 117)
≥ We recommend using the discs that have been recommended in the operating instructions
of the DVD burner. Refer to the operating instructions of the DVD burner for details about
recommended discs, disc handling etc.
112
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 113 ページ
1
2011年12月28日 水曜日 午前10時21分
Connect the AC adaptor (supplied with DVD burner) to the DVD
burner.
≥ You cannot supply power to the DVD burner from this unit.
2
3
Connect this unit to the AC adaptor and change the mode to
.
Connect this unit to the DVD burner with the USB Connection Cable
(supplied with DVD burner).
A USB Connection Cable (supplied with DVD burner)
B DVD burner (optional)
≥ Insert the plugs as far as they will go.
4
Insert the disc in the DVD burner.
≥ Insert the DVD disc with the recording side down when using the DVD burner.
5
Touch the desired item.
[BURN DISC]:
Refer to page 114 for how to copy discs.
[PLAY DISC]:
Refer to page 117 for how to play back the copied discs.
To terminate the connection with the DVD burner
Touch [EXIT].
≥ Disconnect the USB Connection Cable from this unit.
113
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 114 ページ
2011年12月28日 水曜日 午前10時21分
Copying to discs
≥ You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a
DVD-RAM.)
≥ You cannot copy motion pictures together with still pictures or motion pictures in a different
picture quality (AVCHD picture quality and conventional normal picture quality) to the same disc.
≥ iFrame and MP4 scenes cannot be copied to disc. Copy to PC to make a backup. (l 125)
≥ For copying a 3D image, refer to page 123.
≥ HC-V700M
When copying a scene in the built-in memory to a disc that includes a scene that was relayrecorded, the continued scene that is on the SD card will be copied together to the disc.
1
2
3
Connect this unit to the DVD burner to prepare for copying. (l 112)
Touch [BURN DISC].
Touch the desired items following the instructions on the screen.
≥ It will return to the previous step by touching
.
≥ (When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the
indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
≥ (When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel
the operation.
≥ Up to 99 scenes/99 dates can be selected in succession.
4
Touch [START].
≥ When 2 or more discs are necessary for copying, follow the on-screen instructions to
switch discs.
≥ You may need more discs than displayed number of discs when you are copying
additionally to a used DVD-RAM.
≥ Eject the disc after copying is completed.
≥ When the copied disc is played back on another device and the list of scenes is displayed,
they are ordered by date.
≥ To create same disc again, touch [YES] and repeat step 4.
∫ About recording formats when copying motion pictures
[High Definition]:
The scenes recorded in 1080/60p by this unit will be copied after converting to 1080/60i
picture quality.
≥ When copying scenes recorded in 1080/60p, select the recording picture quality ([HA]/
[HG]/[HX]/[HE]).
The scenes recorded in 1080/60i format will be copied as high definition picture quality
as recorded.
[Standard] ([XP]/[SP]):
Images are converted into the original standard picture quality and then copied.
≥ Since [XP] has a higher picture quality compared to [SP], the data capacity becomes
large so that you may need more discs for copying than [SP].
114
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 115 ページ
2011年12月28日 水曜日 午前10時21分
Before you delete the data on the media after copying is complete, be sure to play
back the discs to check that they have been copied to correctly. (l 117)
Important Notice
≥ When connecting an optional DVD burner and this unit for copying a disc, do not
insert a disc with recorded motion pictures in high definition picture quality into
devices that do not support the AVCHD format. In some cases the disc may get
stuck in the device. The disc will not play back on devices that do not support the
AVCHD format.
≥ When inserting a disc containing recorded motion/still pictures into other
devices, a message prompting you to format the disc may be displayed. Do not
format the disc, since deleted data cannot be restored later.
115
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 116 ページ
2011年12月28日 水曜日 午前10時21分
Approximate time for copying to a disc
To copy motion pictures to the full capacity of a disc
Disc type
Copy time
[High Definition]
DVD-RAM
Approx.
50 min to 1 h 20 min
DVD-RW*/
+RW*
Approx.
35 min to 1 h 15 min
DVD-R*/+R*
Approx.
15 min to 45 min
[Standard] ([XP])
[Standard] ([SP])
Approx.
1 h to 1 h 30 min
Approx.
2 h to 3 h
* Even if the data capacity to be copied is small, the time it takes for copying may be
about the same as the time shown in the table.
≥ When copying motion pictures in standard picture quality to a disc, the recordable time
of [Standard] ([XP]) is approx. 1 hour and that of [Standard] ([SP]) is approx. 2 hours.
To copy approx. 600 MB still pictures (Picture size 6.1M )
Disc type
Copy time
DVD-RAM/DVD-RW/DVD-R/+RW/+R
Approx. 10 min to 30 min
To copy approx. 30 minutes of motion pictures recorded in 1080/60p converted to [High
Definition]/[Standard]
Disc type
Copy time
DVD-RAM/DVD-RW/DVD-R/+RW/+R
Approx. 30 min to 1 h 15 min
≥ Copy time of DVD-R DL/+R DL is approximately 2 to 3 times that of DVD-R/+R.
≥ Depending on the following conditions or discs, the time it takes for copying may be
longer than the above times. Wait until the end of copying is displayed.
j When the number of recorded scenes is large
j When the temperature of the DVD burner has become high
≥ The disc that was copied to can be played back by connecting this unit and a DVD
burner.
≥ Do not turn off this unit or the DVD burner or disconnect the USB Connection Cable while
copying. Also, do not shake this unit or the DVD burner.
≥ It is impossible to stop copying halfway.
≥ The order in which the scenes were copied cannot be changed.
≥ Data that has been recorded on another device may not be copied.
≥ When 2 or more discs are necessary for copying, the last scene copied to a disc is
automatically divided to fit the space on the disc.
≥ Copying may complete with more or less than the number of discs displayed when dividing
of scenes was performed automatically etc.
≥ For discs being copied using [Standard] ([XP])/[Standard] ([SP]), you cannot select
Highlight Playback and [HIGHLIGHT] or [FACE] of Highlight & Time Frame Index.
≥ The remaining copy time displayed while copying is the approximate time for a single disc.
116
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 117 ページ
2011年12月28日 水曜日 午前10時21分
Playing back the copied disc
≥ Only discs that have been copied by connecting this unit to the DVD burner or
created with HD Writer AE 4.0 can be played back.
A USB Connection Cable (supplied with DVD burner)
1
Connect this unit to the DVD burner to prepare for playback. (l 112)
≥ When playing back on a TV, connect this unit to the TV. (l 100)
2
Touch the scene or still picture to be played back and then play it
back.
≥ The playback operation is performed the same as when playing back motion pictures or
still pictures. (l 37, 81)
≥ It will return to Step 5 on page 113 when
is selected in the thumbnail screen.
≥ It is also possible to switch the media to play back by touching the play mode select icon.
When the DVD burner is connected, the disc icon can be selected from the displayed
media types. (The still picture or the motion picture can be selected on the same screen.)
Managing the copied disc
≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 113)
∫ Formatting discs
This is for initializing DVD-RAM, DVD-RW and +RW discs.
Please be aware that if a disc is formatted, then all the data recorded on the disc will
be erased. Back up important data on a PC etc.
MENU
: [DISC SETUP] # [FORMAT DISC]
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Connect this unit and the DVD burner to format discs.
You may no longer be able to use the discs if you format them on another device such as a
PC etc.
117
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 118 ページ
2011年12月28日 水曜日 午前10時21分
∫ Auto protect
You can protect (write protect) a DVD-RAM disc when copying motion pictures in high
definition picture quality or a DVD-RW disc when copying motion pictures in high definition
picture quality or still pictures to the disc.
1
Select the menu.
MENU
: [DISC SETUP] # [AUTO PROTECT] # [ON]
≥ If a disc that you copied to is inserted in another device without protecting it, a message
may be displayed prompting you to format the disc. We recommend setting [AUTO
PROTECT] to [ON] in order to prevent accidental deletion.
2
Copy to the disc. (l 114)
≥ After copying, the disc is write protected.
To release the disc protection
MENU
: [DISC SETUP] # [CANCEL PROTECT]
≥ Touch [EXIT] and close the message screen after the auto protection is released.
∫ Displaying disc information
Information such as the type of recorded disc, the number of recorded scenes and whether
or not the disc is finalized is displayed.
MENU
: [DISC SETUP] # [DISC STATUS]
≥ Touch [EXIT] to exit the information screen.
118
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 119 ページ
2011年12月28日 水曜日 午前10時21分
Copy/Dubbing
Dubbing with a Blu-ray disc recorder,
video device, etc.
∫ Check before dubbing
Check the equipment used for dubbing.
Equipment used
for dubbing
Dubbing picture quality
To dub
Equipment with
SD card slot
High-definition picture
quality*
Insert the SD card
directly (l 120)
Equipment with
USB terminal
High-definition picture
quality*
Connect with supplied
USB cable (l 120)
Standard picture quality
This can be played back on
equipment not compatible
with high-definition
(AVCHD), so is convenient
if you are dubbing for
distribution.
Connect with supplied
AV multi cable (l 122)
Equipment without
SD card slot or
USB terminal
* Some equipment may not be compatible with high-definition (AVCHD) picture quality. In
such a case, connect with the AV multi cable and dub with standard picture quality. (l 122)
≥ For the positions of the SD card slot, USB terminal, or terminal for connecting the AV multi
cable, refer to the operating instructions of the equipment used.
≥ The iFrame and MP4 scenes cannot be dubbed by inserting the SD cards or by connecting
with the USB cable. To dub iFrame and MP4 scenes, refer to page 122.
119
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 120 ページ
2011年12月28日 水曜日 午前10時21分
Dubbing in high-definition picture quality
You can dub using a Panasonic Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
≥ Depending on the recorders or the media to be copied to, you may not be able to
copy in high-definition (AVCHD) picture quality. For further details, see the
operating instructions of your recorder.
≥ Note that the equipment described may not be available in certain countries and
regions.
About dubbing of scenes recorded in 1080/60p
The scenes recorded in 1080/60p recording mode can only be dubbed to a Blu-ray disc
using the AVCHD Progressive compatible devices. The scenes recorded in 1080/60p
recording mode are not displayed when connected to the product that is not compatible
with AVCHD Progressive.
∫ To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥ HC-V700M
To copy scenes or still pictures from the builtin memory to an SD card, see page 109.
∫ To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Turn on the unit (This function is available in all modes).
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1
Connect the unit to the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥ The USB function selection screen will appear on the screen of the unit.
120
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 121 ページ
2
2011年12月28日 水曜日 午前10時21分
Touch [RECORDER] on the screen of this unit.
≥ When you select an option other than [RECORDER], reconnect the USB cable.
≥ HC-V700
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
3
HC-V700M
Touch the media you wish to dub.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
4
Dubbing through operations on the Blu-ray disc recorder or highdefinition (AVCHD) compatible DVD recorder.
≥ HC-V700M
Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
About the screen indication of the unit
≥ When the unit is accessing the SD card, card access icon (
) appears on the unit
screen or the access lamp is on.
≥ HC-V700M
When the unit is accessing the built-in memory, built-in memory access icon (
)
appears on the unit screen or the access lamp is on.
≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is
accessing media, as this may result in the loss of recorded content.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥ When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using
a USB cable while the unit is turned on, power is also supplied from the connected
equipment to this unit.
≥ For details on dubbing and playback methods, read the instructions for the Blu-ray disc
recorder or DVD recorder.
≥ When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may
appear on the television connected to the Blu-ray disc recorder. In this case as well,
perform the operations of Steps 1 to 4.
≥ You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray
disc recorder or DVD recorder. Disconnect the USB cable before performing either of these
operations.
≥ If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc
recorder to cancel the dubbing.
121
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 122 ページ
2011年12月28日 水曜日 午前10時21分
Dubbing in standard picture quality
∫ Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting an AV multi cable.
≥ Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
Change the video input on the
video device and TV that this
unit is connected to.
≥ The channel set will differ depending
on the terminal to which the unit is
connected.
≥ See the operating instructions of the
video device for details.
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV multi cables
except the supplied one.
A AV multi cable (supplied)
AV MULTI
≥ Change the mode to
1
2
.
Connect this unit to a video device and start playback on this unit.
Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the
recorder.
≥ If the date and time display and function indication are not wanted, cancel them before
dubbing. (l 42, 102)
≥ For setting when connecting the AV multi cable, refer to page 103.
If the dubbed images are played back on a wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction for the device you are connecting to or read
the operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
122
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 123 ページ
2011年12月28日 水曜日 午前10時21分
Copy/Dubbing
3D image storage
You can store 3D image with a DVD burner, video device or a PC.
Copying with a DVD burner
≥ Please refer to page 112 for details about copying with a DVD burner.
∫ Copying unaltered as 3D image
Recording format: [High Definition]
The scenes recorded in 3D using the unit can be copied and stored in unaltered form as
3D motion picture.The motion picture is recorded unaltered in side-by-side format.
∫ Copying after conversion to 2D image
Recording format: [Standard] ([XP]/[SP])
Scenes recorded in 3D are converted to 2D motion picture before being copied and
stored. In this case, 3D motion picture cannot be stored in unaltered form.
≥ Recording quality cannot be selected for copying still pictures.
Dubbing with a Blu-ray disc recorder, video device, etc.
∫ Dubbing in high-definition picture quality
(Dubbing directly from inserted SD card/Dubbing with a USB cable)
≥ Please refer to page 119 for details about dubbing in high-definition picture quality
When dubbing with high-definition (AVCHD) picture quality, you can store 3D motion picture.
The motion picture is recorded unaltered in side-by-side format.
≥ If the dubbed motion picture does not change to 3D motion picture, make the necessary
settings on the TV. (For further details, please read the operating instructions for the TV.)
≥ It may not be possible to copy 3D still pictures (MPO format) depending on the recorder
being used.
∫ Dubbing in standard picture quality
≥ Please refer to page 122 for details about dubbing in standard picture quality.
Copying unaltered as 3D motion picture
When [3D PLAYBACK] is [AUTO], the 3D motion picture is recorded in side-by-side format.
MENU
: [SETUP] # [3D PLAYBACK] # [AUTO]
≥ If the dubbed motion picture does not change to 3D motion picture, make the necessary
settings on the TV. (For further details, please read the operating instructions for the TV.)
Copying after conversion to 2D motion picture
Set [3D PLAYBACK] to [2D].
MENU
: [SETUP] # [3D PLAYBACK] # [2D]
≥ Set [CONV. 2D TO 3D] to [OFF]. (l 108)
123
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 124 ページ
2011年12月28日 水曜日 午前10時21分
Copying between SD card and built-in memory [HC-V700M]
≥ Please refer to page 109 for details about copying between SD card and built-in memory.
∫ Copying scenes recorded in 3D
MENU
: [COPY] # [
] or [
]
≥ You can copy scenes recorded in 3D between the SD card and the built-in memory.
j Select [VIDEO] > [SELECT SCENES] or [SELECT DATE] > [SbS 3D].
j When selecting scenes, select ones marked with 3D on the thumbnail display.
j When selecting by date, select a date marked with 3D from the list of dates.
Using HD Writer AE 4.0
≥ Please refer to page 125 for details about copying with HD Writer AE 4.0.
When you use HD Writer AE 4.0 to handle scenes recorded in 3D, the following operations
are possible.
j Copying data to a PC
(Scenes recorded in 3D will be copied unaltered as 3D image.)
j Copying in Blu-ray disc/AVCHD format
(Scenes recorded in 3D will be copied unaltered as 3D image.)
j Copying in DVD-Video format
(Scenes recorded in 3D will be converted to 2D image when copied.)
j Editing
j Online sharing
(Convert the scenes recorded in 3D to 2D image when uploading.)
j Playing back on a PC
Using a Mac
≥ Scenes recorded in 3D are not supported by iMovie’11.
124
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 125 ページ
2011年12月28日 水曜日 午前10時21分
With a PC
What you can do with a PC
HD Writer AE 4.0
You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray
discs, DVD discs or SD cards using HD Writer AE 4.0, the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer AE 4.0 (PDF file) for details on how to use it.
∫ Smart Wizard
The Smart Wizard Screen is automatically displayed when you connect this unit to a PC with
HD Writer AE 4.0 installed. (l 133)
Copy to PC:
You can copy motion/still picture data to the HDD of PCs.
Copy to disc:
You can copy to disc in high definition picture quality or conventional standard picture quality
(MPEG2 format).
≥ Select the function you wish to use and follow the on-screen instructions for easy copying.
What can be done with the HD Writer AE 4.0
Data type
Copying data to a PC
Copying in Blu-ray disc/AVCHD format:
≥ The scenes recorded in 1080/60p can be copied as 1080/60p.
(Important Notice l 126)
≥ The scenes recorded in iFrame or the scenes saved as MP4 cannot
be copied in Blu-ray disc or in AVCHD format.
Motion
picture and
still picture
Copying in DVD-Video format:
≥ Converted to conventional standard quality (MPEG2 format).
Editing:
Editing motion picture data copied on an HDD of a PC
≥ Dividing, Trimming, Still picture, Title, Effect, Transition, BGM, Delete
partially
≥ Converting the motion picture data to MPEG2
≥ Converting part of motion picture into still picture
Motion
picture
Online sharing:
You can upload motion pictures on the Internet and share them with your
family and friends.
Playing back on a PC:
Play back the motion picture data in high definition picture quality on a PC.
Formatting discs:
Depending on the type of disc that you use, formatting is necessary.
Motion
picture and
still picture
Motion
picture
125
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 126 ページ
2011年12月28日 水曜日 午前10時21分
≥ It is possible to play back still picture on a PC using a image viewer standard to Windows
or commercially available image browsing software, and copy still pictures to a PC using
Windows Explorer.
≥ Please refer to page 137 for details about using a Mac.
Important Notice
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
≥ Do not insert a disc recorded in AVCHD format with HD Writer AE 4.0 in a device
that does not support the AVCHD format. In some cases the disc may get stuck in
the device. The disc will not play back on devices that do not support the AVCHD
format.
≥ To play back a Blu-ray disc to which you have copied scenes recorded in 1080/
60p, equipment is required that supports AVCHD Progressive.
≥ When inserting a disc containing recorded motion pictures into other devices, a
message prompting you to format the disc may be displayed. Do not format the
disc, since deleted data cannot be restored later.
≥ Data cannot be written into the SD card from a PC via this unit.
≥ HC-V700M
It is impossible to write data to the built-in memory on this unit from a PC.
≥ Motion pictures that have been recorded on another device cannot be written to the
software supplied with this unit. To write motion picture data recorded with the
Panasonic High Definition Video Camera sold previously, use the HD Writer supplied
with the unit.
≥ When motion picture data is written to and read from the SD card, correct operation of the
unit cannot be guaranteed if software other than that supplied with the unit is used.
≥ Do not start the software supplied with this unit and other software at the same time. Close
any other software if you start the software supplied with this unit and close the software
supplied with this unit if you start any other software.
∫ About Conversion Assist Function
When you want to convert the recording quality and write to media, the “Conversion Assist
Function”, which is a linking function between this unit and the HD Writer AE 4.0, is activated
by connecting this unit to the PC with the USB cable. When the “Conversion Assist Function”
is used, it is possible to write to media faster than when operating only on PC.
≥ Please refer to page 133 for details about the connection of this unit and a PC.
≥ Refer to the operating instructions of the software for details. (l 136)
126
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 127 ページ
2011年12月28日 水曜日 午前10時21分
End User License Agreement
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for
the Software defined in this End User
License Agreement (“Agreement”) on
condition that you agree to the terms and
conditions of this Agreement.
Article 1 License
Licensee is granted the right to use the
software, including the information recorded
or described on the CD-ROM, instruction
manuals, and any other media provided to
Licensee (collectively “Software”), but all
applicable rights to patents, copyrights,
trademarks and trade secrets in the
Software are not transferred to Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify,
transfer, rent, lease, lend or allow any third
party, whether free of charge or not, to use,
copy or modify the Software, except as
expressly provided for in this Agreement.
Article 3 Restrictions on Copying the
Software
Licensee may make a single copy of the
Software in whole or a part solely for backup purpose.
Article 4 Computer
Licensee may use the Software only on one
computer, and may not use it on more than
one computer. Further, Licensee may not
use the Software for commercial software
hosting services.
Article 5 Reverse Engineering,
Decompiling or Disassembly
Licensee may not reverse engineer,
decompile, or disassemble the Software,
except to the extent either of them is
permitted under law or regulation of the
country where Licensee resides. Panasonic,
or its distributors will not be responsible for
any defects in the Software or damage to
Licensee caused by Licensee’s reverse
engineering, decompiling, or disassembly of
the Software.
Article 6 Indemnification
The Software is provided “AS-IS” without
warranty of any kind, either expressed or
implied, including, but not limited to,
warranties of non-infringement,
merchantability and/or fitness for a particular
purpose. Further, Panasonic does not
warrant that the operation of the Software
will be uninterrupted or error free. Panasonic
or any of its distributors will not be liable for
any damage suffered by Licensee arising
from or in connection with Licensee’s use of
the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to
any country the Software in any form without
the appropriate export licenses under
regulations of the country where Licensee
resides, if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will
be automatically terminated if Licensee
contravenes any of the terms and conditions
of this Agreement. In this event, Licensee
must destroy the Software and related
documentation together with all the copies
thereof at Licensee’s own expense.
127
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 128 ページ
Article 9 With regard to MICROSOFT SQL
SERVER COMPACT 3.5 produced by
Microsoft Corporation
(1) Licensee shall use the MICROSOFT
SQL SERVER COMPACT 3.5 only when
included in the Software, and shall not use
the MICROSOFT SQL SERVER COMPACT
3.5 in any other configuration or method.
Licensee shall not publish the MICROSOFT
SQL SERVER COMPACT 3.5 or work
around any technical limitations in the
MICROSOFT SQL SERVER COMPACT
3.5.
(2) Licensee shall not use, copy, distribute,
regrant for use or otherwise handle the
Software in any way beyond the range of
use granted under Article 9 (1), and shall not
conduct operations such as reverse
engineering, decompilation, disassembling,
etc. of the MICROSOFT SQL SERVER
COMPACT 3.5.
(3) All rights, including copyright, patent
rights etc. relating to the MICROSOFT SQL
SERVER COMPACT 3.5 shall belong to
Microsoft Corporation. Licensee shall not
claim any rights related to the MICROSOFT
SQL SERVER COMPACT 3.5 whatsoever.
128
VQT3Y41
2011年12月28日 水曜日 午前10時21分
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 129 ページ
2011年12月28日 水曜日 午前10時21分
With a PC
Operating environment
≥ Even if the system requirements mentioned in this owner’s manual are fulfilled, some PCs
cannot be used.
≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible
Blu-ray disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/DVD.)
≥ Operation is not guaranteed in the following cases.
j When 2 or more USB devices are connected to a PC, or when devices are connected
through USB hubs or by using extension cables.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
≥ This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98,
Windows 98SE, Windows Me, Windows NT and Windows 2000.
∫ Operating environment for HD Writer AE 4.0
PC
IBM PC/AT compatible PC
OS
Windows 7 (32 bit/64 bit) Starter/Home Basic/Home Premium/
Professional/Ultimate (SP1)
Windows Vista (32 bit) Home Basic/Home Premium/Business/
Ultimate (SP2)
Windows XP (32 bit) (SP3)
CPU
Intel Pentium 4 2.8 GHz or higher (including compatible CPU)
≥ Intel Core 2 Duo 2.16 GHz or higher or AMD Athlon 64 X2 DualCore 5200+ or higher is recommended when using playback
function or MPEG2 output function.
≥ Intel Core 2 Quad 2.6 GHz or higher is recommended when using
editing or Continuous Photo Playback function.
≥ Intel Core i7 2.8 GHz or higher is recommended when playing
back or using the editing function for 1080/60p
RAM
Windows 7: 1 GB or more (32 bit)/2 GB or more (64 bit)
Windows Vista: 1 GB or more
Windows XP: 512 MB or more (1 GB or more recommended)
Display
High Color (16 bit) or more (32 bit or more recommended)
Desktop resolution of 1024k768 pixels or more (1920k1080 pixels
or more recommended)
Windows 7/Windows Vista: DirectX 9.0c compatible video card
(DirectX 10 recommended)
Windows XP: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Express™k16 compatible recommended
Video memory of 256 MB or more recommended
129
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 130 ページ
2011年12月28日 水曜日 午前10時21分
Free hard disk
drive space
Ultra DMA — 100 or more
450 MB or more (for installing the software)
≥ When writing to a DVD/Blu-ray disc/SD, more than double the
amount of free space as the disc being created is necessary.
Sound
DirectSound Support
Interface
USB port [Hi-Speed USB (USB 2.0)]
Other
requirements
Mouse or equivalent pointing device
Internet connection
∫ When using the 3D watching functions
OS
Windows 7 (32 bit/64 bit) Home Premium/Professional/Ultimate or
SP1
CPU
Intel Core 2 Quad 2.8 GHz or higher is recommended.
Display
3D VISION-Ready Display
Graphics Card
3D VISION Compatible NVIDIA Graphics Card*
3D glasses
NVIDIA 3D VISION Kit*
* Make sure that you are using the latest version of the video card driver.
≥ Supplied CD-ROM is available for Windows only.
≥ Input is not supported in languages other than English, German, French, Simplified Chinese and Russian.
≥ Operation cannot be guaranteed on all Blu-ray disc/DVD drives.
≥ Operation is not guaranteed on Microsoft Windows Vista Enterprise, Windows XP
Media Center Edition, Tablet PC Edition and Windows 7 Enterprise.
≥ This software is not compatible with a multi-boot environment.
≥ This software is not compatible with a multi-monitor environment.
≥ If using Windows XP, an administrative account user only can use this software. If using
Windows Vista/Windows 7, administrative account and standard account users only can
use this software. (An administrative account user should install and uninstall this software.)
∫ To use the HD Writer AE 4.0
You will need a high performance PC depending on the functions to be used. It may not
properly play back or properly operate depending on the environment of the PC used. Refer
to the operating environment and notes.
≥ Operation during the playback may become slow if the CPU or memory is not fulfilling the
requirements of the operating environment.
≥ Always use the most current driver for the video card.
≥ Always make sure there is enough capacity on the HDD in the PC. It may become
inoperable or the operation may stop suddenly if the capacity gets low.
130
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 131 ページ
2011年12月28日 水曜日 午前10時21分
∫ Operating environment for the card reader function (mass storage)
PC
IBM PC/AT compatible PC
OS
Windows 7 (32 bit/64 bit) or SP1
Windows Vista (32 bit) (SP2)
Windows XP (32 bit) (SP3)
CPU
Windows 7/Windows Vista: 1 GHz or higher
32-bit (k86) or 64-bit (k64) processor (including compatible CPU)
Windows XP: Intel Pentium III 450 MHz or higher or Intel Celeron
400 MHz or higher
RAM
Windows 7: 1 GB or more (32 bit)/2 GB or more (64 bit)
Windows Vista Home Basic: 512 MB or more
Windows Vista Home Premium/Business/Ultimate/Enterprise:
1 GB or more
Windows XP: 512 MB or more (1 GB or more recommended)
Interface
USB port
Other
requirements
Mouse or equivalent pointing device
≥ The USB equipment operates with the driver installed as standard in the OS.
131
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 132 ページ
2011年12月28日 水曜日 午前10時21分
With a PC
Installation
When installing the software, log on to your computer as the Administrator or with a user
name with equivalent authorization. (If you do not have authorization to do this, consult your
manager.)
≥ Before starting the installation, close all applications that are running.
≥ Do not perform any other operations on your PC while the software is being installed.
≥ Explanation of operations and screens is based on Windows 7.
1
Insert the CD-ROM into the PC.
≥ The following screen is displayed automatically. Click [Run setup.exe] # [Yes].
≥ If Windows 7 is in use, or the following screen is not displayed automatically, select [Start]
# [Computer] (or double-click on [Computer] on the desktop), and then double-click
[Panasonic].
2
Click [Yes].
≥ Operate following the instruction on the screen.
≥ If the country or region cannot be selected, select [NTSC Area].
The PC must be rebooted for the application to work.
∫ Uninstalling HD Writer AE 4.0
Follow the steps below to uninstall any software applications that you no longer require.
1
2
Select [Start] # [Control Panel] # [Uninstall a program].
Select [HD Writer AE 4.0], then click [Uninstall].
≥ Proceed with the uninstallation by following the on-screen instructions.
≥ After uninstalling the software, be sure to reboot the PC.
132
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 133 ページ
2011年12月28日 水曜日 午前10時21分
With a PC
Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1
Connect this unit to the AC adaptor.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Connect with the AC adaptor when using the Conversion Assist Function.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
≥ The USB function selection screen will appear.
4
Touch [PC] on the screen of this unit.
≥ The Smart Wizard Screen is automatically displayed when HD Writer AE 4.0 is installed.
≥ This unit is automatically recognized as an external drive of the PC. (l 135)
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥ When this unit is connected to a PC using a USB cable while the unit is turned on, power is
also supplied from the PC to this unit.
≥ When performing reading/writing between a PC and an SD card, be aware that some SD
card slots built into PCs and some SD card readers are not compatible with the SDHC
Memory Card or SDXC Memory Card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
133
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 134 ページ
2011年12月28日 水曜日 午前10時21分
∫ To disconnect USB cable safely
Select the
icon in task tray displayed on the PC, and then click [Eject Panasonic
Camcorder].
≥ Depending on your PC’s settings, this icon may not be displayed.
About the screen indication of the unit
≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or
card access icon (
) appears on the unit screen.
≥ HC-V700M
Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or
built-in memory access icon (
) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC,
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the
battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit
back on. (Data may be destroyed when above operation is performed while accessing
the SD card or built-in memory.)
∫ Charging the battery by connecting it to different devices
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
≥ When connecting this unit to a PC for the first time, make sure to connect this unit to
the PC with this unit turned on.
≥ Insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥ Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
≥ During charging, the status indicator flashes.
≥ You cannot charge when the status indicator flashes rapidly, or when it does not light at all.
Charge using the AC adaptor. (l 21)
≥ It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 151.
134
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 135 ページ
2011年12月28日 水曜日 午前10時21分
About the PC display
When the unit is connected to a PC, it is recognized as an external drive.
≥ Removable disk (Example:
) is displayed in [Computer].
We recommend using HD Writer AE 4.0 to
copy motion picture data.
Using Windows Explorer or other
programs on the PC to copy, move or
rename files and folders recorded with
this unit will result in them being unusable
with HD Writer AE 4.0.
It is impossible to write data to the built-in
memory or SD card on this unit from a PC.
Example folder structure of an SD card:
CAM_SD
DCIM
100CDPFQ

101UCPBH

102CDPFR

103CDPFS

PRIVATE
AVCHD
AVCHDTN

BDMV

PANA_EXT

HC-V700M
Example folder structure of built-in
memory:
CAM_MEM
DCIM
100CDPFQ

101UCPBH

102CDPFR

103CDPFS

The following data will be recorded.
1 MPO/JPEG format still pictures (up to
999 still pictures can be recorded.
([S1000001.MPO], [S1000001.JPG],
etc.))
2 iFrame/MP4 format motion picture
files ([S1000001.MP4] etc.)
3 JPEG format still pictures recorded
in Hi-Speed Burst Shooting Mode
4 MPO/JPEG format still pictures
created from the motion picture
5 The motion picture thumbnails
6 AVCHD format motion picture files
([00000.MTS] etc.)
7 For management
∫ Copying your still pictures to
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be
copied to the PC with Explorer or other
programs.
1 Double click the folder that contains
the still pictures. ([DCIM] #
[100CDPFQ] etc.)
2 Drag and drop the still pictures onto
the destination folder (on the PC’s
HDD).
≥ Do not delete the SD card’s folders. Doing
so may make the SD card unusable in this
unit.
≥ When data not supported by this unit has
been recorded on a PC, it will not be
recognized by this unit.
≥ Always use this unit to format SD cards.
AVCHD
AVCHDTN

BDMV

PANA_EXT

135
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 136 ページ
2011年12月28日 水曜日 午前10時21分
With a PC
Starting HD Writer AE 4.0
≥ To use the software, log on as an Administrator or as user name for standard user account
(only for Windows 7/Windows Vista).
The software cannot be used with the user name for a guest account.
(On the PC)
Select [Start] # [All Programs] # [Panasonic] # [HD Writer AE 4.0] #
[HD Writer AE].
≥ For details on how to use the software applications, read the PDF operating instructions of
the software.
Reading the operating instructions of the software
applications
≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the
PDF operating instructions.
Select [Start] # [All Programs] # [Panasonic] # [HD Writer AE 4.0] #
[Operating Instructions].
136
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 137 ページ
2011年12月28日 水曜日 午前10時21分
With a PC
If using Mac
≥ HD Writer AE 4.0 is not available for Mac.
≥ iMovie’11 supported. For details about iMovie’11, please contact Apple Inc.
≥ iMovie’11 is not compatible with 1080/60p. 1080/60p scenes cannot be imported to a Mac.
j For users who have HC-V700 , it cannot acquire the scenes recorded in 1080/60p.
Record in normal recording mode when importing to Mac.
j For users who have HC-V700M , convert the scene with [
] before
importing. (l 109)
∫ Operating environment
PC
OS
CPU
RAM
Interface
Other
requirements
Mac
Mac OS X 10.7.2
Intel Core 2 Duo or better
2 GB or more
USB port
Mouse or equivalent pointing device
≥ Even if the system requirements mentioned in this owner’s manual are fulfilled, some PCs
cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
≥ Supplied CD-ROM is available for Windows only.
∫ Copying still pictures on PC
1
Connect this unit to a PC via the supplied USB cable.
≥ The USB function selection screen will appear.
2
Touch [PC] on the screen of this unit.
≥ This unit is automatically recognized as an external drive of Mac.
≥ When you select an option other than [PC], reconnect the USB cable.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
3
Double-click [CAM_SD] displayed on the desktop.
≥ For users who have HC-V700M , [CAM_SD] and [CAM_MEM] are displayed on the
desktop.
≥ Files are stored in [100CDPFQ] or [102CDPFR] folder etc. in the [DCIM] folder.
4
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
∫ To disconnect USB cable safely
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
≥ For users who have HC-V700M , [CAM_SD] and [CAM_MEM] are displayed on the desktop.
≥ The still picture of MPO format is not compatible with Mac.
137
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 138 ページ
2011年12月28日 水曜日 午前10時21分
Others
Indications
* HC-V700M only
∫ Recording indications
Motion Picture Recording Mode
0h00m00s
Still Picture Recording Mode

1h30m
R 1h20m
+1
R 3000
1h30m
+1
6.1M
MEGA
PRE-REC

MF
1/100
OPEN 0dB
12:34PM
NOV 15 2012

R 1h20m
A
/
/
/
/
MF
1/100
OPEN 0dB
12:34PM
NOV 15 2012
/
/
/
/
Relay Recording (l 63)*
Intelligent Auto Mode (l 35)
A
Manual Mode (l 74)
MNL
/
/
/
/
/
/
/
/
/
/
/ +2 / +1 / -1
Power LCD (l 45)
/
/
Scene Mode (l 61)
¥/; (Red)
Recording
; (Green)
Recording pause
0h00m00s
Elapsed recording time
(l 31)
Remaining battery power
(l 22)
Remaining battery time
(l 22)
Built-in memory recording
possible status*
(White) Card recording possible status
(Green) Recognizing the card
/
/
/
/
/
/
Motion Picture Recording Mode (l 62)
138
VQT3Y41
/
/
/
(White)
Still picture recording icon
(Red)
Recording still picture
R3000
(“h” is an abbreviation for hour, “m” for
minute and “s” for second.)
1h30m
/
Image Stabilizer (l 50, 80)/Optical Image
Stabilizer Lock (l 54, 80)
3D recording (l 79)
3D
Remaining time for motion
picture recording (l 31)
Remaining number of still
pictures (l 34)
6.1M / 2.3M / 0.3M / 6.1M / 2.3M / 5.8 M / 2.1 M / 0.2 M
Number of recording pixels for still pictures
(l 34, 70, 72, 82)
In Playback Mode, the picture size is not
displayed for still pictures recorded with
other products that have different picture
sizes from the sizes shown above.
Ø10/Ø2
MEGA
Self-Timer Recording (l 58)
MEGA OIS (l 33)
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 139 ページ
2011年12月28日 水曜日 午前10時21分
B
PRE-REC
C
PRE-REC (l 56)
Display Touch Menu (l 27)
Zoom Microphone (l 69)
Wind Noise Canceler (l 68)
Backlight Compensation
(l 59)
Picture Adjustment (l 70)
Tele Macro (l 59)
Digital Cinema Color (l 68)
Intelligent Contrast Control
(l 56)
AF/AE tracking (l 53)
Microphone Level (l 69)
Touch Zoom (l 52)
/
Touch Shutter (l 54)
MF
Manual Focus (l 77)
AWB /
/
/
/
White Balance (l 75)
/
/
Shutter Speed (l 76)
OPEN/F2.0
Iris value (l 76)
0dB
Gain value (l 76)
/
/
Video Light (l 60)
Smile Shot (l 57)
/
1/100
± (White)/¥ (Green)/
/
Fade (White),
Fade (Black) (l 56)
Color Night Rec function
(l 60)
Intelligent Exposure (l 59)
/
/
Focus indication (l 33)
ß/ßA/
Flash (l 58)
ßi/ßj
Flash Level (l 58)
Hi-Speed Burst Shooting
(l 72)
AF assist lamp (l 73)
Red-Eye Reduction (l 58)
World time setting (l 41)
NOV 15 2012 Date indication (l 28)
12:34PM
Time indication (l 28)
139
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 140 ページ
∫ Playback indications
1/;/5/
/6/
D/E/;1/2;
/7/8/9/:/
2011年12月28日 水曜日 午前10時21分
∫ Indication of connection to
other devices
Accessing the card (l 121,
134)
Display during playback (l 37, 81)
0h00m00s
Playback Time (l 37)
No.10
Scene Number
Repeat Playback (l 83)
Resume Playback (l 83)
100-0001
Still picture folder/file name
Accessing the built-in memory
(l 121, 134)*
∫ Confirmatory indications
–– (Time
display)
The built-in battery is low.
(l 28)
Warning for recording of
yourself (l 29)
Protected motion pictures/
still pictures (l 97)
/
/
/
/
SD card is not inserted or is
non-compatible.
/
Play mode selection display (l 37)
Relay-recorded scene
(l 63)*
Still picture recorded using
Smile Shot (l 57)
∫ Confirmatory indications when
a DVD burner is connected
Disc Playback (l 117)
Scene copied in [Standard] ([XP])
XP
Scene copied in [Standard] ([SP])
SP
Scenes saved with Highlight
Playback (l 90)
Scenes with facial
recognition (l 97)
3D
140
VQT3Y41
Scenes recorded in 3D
(l 106)
/
/
/
Disc type (l 112)
/
/
/
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 141 ページ
2011年12月28日 水曜日 午前10時21分
Others
Messages
Major confirmation/error messages to be indicated on the screen in text.
* HC-V700M only
PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.*
We recommend backing up important recorded motion pictures and still pictures
periodically to a PC, DVD disc etc. to protect it. (l 112, 125) This message does not
indicate that there is a problem with this unit.
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still pictures are recorded on an
SD card, the card may be unstable. Reinsert the SD card, then turn the unit off and then
on again.
THIS BATTERY CANNOT BE USED.
≥ Use a battery that is compatible with this unit. (l 20)
If using a Panasonic battery compatible with this unit, remove the battery and then
insert it again. If the message appears even after repeating this several times, this unit
needs repair. Detach the power and contact consumer support. (l 167, 168,169). Do
not attempt to repair it by yourself.
≥ You are attempting to connect an AC adaptor not compatible with this unit. Use the
supplied AC adaptor. (l 21)
PLEASE CHECK EXTERNAL DRIVE OR DISC.
A disc that cannot be used when connecting the unit to the DVD burner has been inserted,
or the DVD burner is not recognized properly. Connect the USB Connection Cable again
and insert a disc to copy the data. (l 112)
141
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 142 ページ
2011年12月28日 水曜日 午前10時21分
About recovery
If faulty management information is found, the messages may appear and a repair is
performed. (Repairing may take time depending on the error.)
≥
is displayed when abnormal management information is detected when the scenes are
displayed in thumbnail. To perform the repair, touch the scene with
in the thumbnail,
and start the playback.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the
data.
≥ If recovery fails, it will not be possible to play back scenes recorded before the unit turned
off.
≥ When data recorded on another device is recovered, it may not be possible to play back
the data on this unit or the other device.
≥ If recovery fails, turn the unit off and on again after waiting a while. If recovery fails
repeatedly, format a media on the unit. Please be aware that if a media is formatted, then
all the data recorded on the media will be erased.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
142
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 143 ページ
2011年12月28日 水曜日 午前10時21分
Others
Troubleshooting
∫ It is not a malfunction in following cases
A clicking sound is
heard when the unit is
shaken.
≥ This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned
on and change the mode to
or
.
Object seems to be
warped.
≥ Object seems to be warped slightly when the object
moves across the image very fast, but this is because the
unit is using MOS for the image sensor. This is not a
malfunction.
White round spots like
soap bubbles appear on
the recorded picture.
≥ If you take a picture with
the flash in a dark place or
indoors, white round spots
may appear on the picture
caused by the flash
reflecting of particles of
dust in the air. This is not
a malfunction.
A characteristic of this is that the number of round spots
and their position differ in every picture.
Power
Problem
This unit cannot be
turned on.
This unit does not stay
on long enough.
Check points
≥ Charge the battery again to ensure it is sufficiently
charged. (l 21)
≥ In cold places, the battery using time becomes shorter.
≥ The battery has a limited life. If the operating time is still
too short even after the battery is fully charged, the
battery has worn out and needs to be replaced.
Battery runs down
quickly.
This unit is turned off
automatically.
≥ If the unit turns off when you turn off the power to the TV
using the TV remote control, the VIERA Link is at work. If
you are not using the VIERA Link, set [VIERA Link] to
[OFF]. (l 104)
≥ When this unit is connected to a DVD burner to copy or
play back images (a disc is being accessed), the unit
turns off automatically if the USB Connection Cable is
removed.
143
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 144 ページ
2011年12月28日 水曜日 午前10時21分
Power
Problem
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
“ERROR OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN ON
AGAIN.” is displayed.
Check points
≥ Remove the battery or AC adaptor, wait about 1 minute
and then reconnect the battery or AC adaptor. Then
about 1 minute later, turn on the unit again. (Conducting
the above operation while the media is being accessed
may damage the data on the media.)
≥ If normal operation is still not restored, detach the power
connected, and contact consumer support. (l 167, 168,
169)
≥ The unit has automatically detected an error. Restart the
unit by turning the unit off and on.
≥ The unit will be turned off in about 1 minute if the unit is
not turned off and on.
≥ Repair is needed if it is repeatedly displayed even if it is
restarted. Detach the power connected, contact
consumer support. (l 167, 168, 169) Do not attempt to
repair the unit by yourself.
Indication
Problem
Remaining battery
indication is not
displayed properly.
144
VQT3Y41
Check points
≥ The remaining battery capacity indication is an
approximation.
If the remaining battery capacity indication is not
displayed correctly, fully charge the battery, discharge it
and then charge it again.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 145 ページ
2011年12月28日 水曜日 午前10時21分
Recording
Problem
Check points
The unit arbitrarily stops
recording.
≥ Use an SD card that can be used for motion picture
recording. (l 23)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD card
or built-in memory. (l 46, 47)
≥ If [AGS] is [ON], record in the normal horizontal position
or set [AGS] to [OFF]. (l 67)
Auto Focus function
does not work.
≥ Switch to Intelligent Auto Mode.
≥ If you are trying to record a scene which is hard to bring
into focus in Auto Focus Mode, use the Manual Focus
Mode to adjust the focus. (l 36, 77)
Color balance of images
is strange when
recording in a place
such as a gymnasium.
≥ In a place with multiple light sources, such as a
gymnasium or a hall, set the White Balance setting to
(Indoor mode 2). If you cannot record clearly with the
(Indoor mode 2), set it to
(Manual adjustment
mode). (l 75)
Color or brightness of
the image changes, or
you may see horizontal
bars in the image.
≥ Color or brightness of the image may change, or you may
see horizontal bars in the image when the object is
recorded under fluorescent light, mercury light or sodium
light, etc., but this is not a malfunction.
≥ In Motion Picture Recording Mode, record in Intelligent
Auto Mode or set the shutter speed to 1/60 in areas
where the power supply frequency is 60 Hz, or 1/100 in
areas of 50 Hz.
≥ In Still Picture Recording Mode, this will not affect the
recorded image.
The LCD monitor flickers
indoors.
Playback
Problem
Check points
Scenes/still pictures
cannot be played back.
≥ Any scenes/still pictures where the thumbnails are
displayed as
cannot be played back.
Scenes cannot be
deleted.
≥ Release the protect setting. (l 97)
≥ Any scenes/still pictures where the thumbnails are
displayed as
cannot be deleted. If the scenes/still
pictures are unnecessary, format the media to erase the
data. (l 46, 47) Please be aware that if a media is
formatted then all the data recorded on the media is
erased and cannot be recovered. Back up important data
on a PC, disc etc.
145
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 146 ページ
2011年12月28日 水曜日 午前10時21分
With other products
Problem
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are
squeezed horizontally.
Check points
≥ Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
≥ Change the [TV ASPECT] setting to match the aspect
ratio of the TV. (l 102)
≥ Change the setting of the unit depending on the cable
connecting to the TV. (l 103)
If the SD card is inserted
in another device, it is
not recognized.
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card/
SDXC Memory Card) that you inserted. Refer to the
operating instructions of the device for details.
When connected by the
USB cable, this unit is
not detected by the other
devices.
≥ When connected to other devices using only the battery,
reconnect using the AC adaptor.
VIERA Link does not
work.
(Setting on this unit)
≥ Connect with a HDMI mini cable. (l 104)
≥ Touch MENU , then touch [SETUP] # [VIERA Link] #
[ON]. (l 104)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the
connected device.
The power of the DVD
burner cannot be turned
on.
≥ When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
≥ Other equipment might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
146
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 147 ページ
2011年12月28日 水曜日 午前10時21分
With a PC
Problem
Check points
When connected by the
USB cable, this unit is
not detected by the PC.
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 129, 137)
≥ Connect the supplied USB cable again after restarting the
PC and turning on this unit again.
When the USB cable is
disconnected, an error
message will appear on
the PC.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the
screen.
Cannot see the PDF
operating instructions
for HD Writer AE 4.0.
≥ You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for HD Writer AE 4.0.
Others
Problem
Check points
If the SD card is inserted
in this unit, it is not
recognized.
≥ If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD cards.
(l 46, 47)
147
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 148 ページ
2011年12月28日 水曜日 午前10時21分
∫ If AVCHD scenes do not change smoothly when played back on
another device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using
another unit.
≥ Just how smoothly the scenes will be played back depends on the playback unit.
Depending on the unit used, the images may stop moving and become still for a moment
even when none of the following conditions are applicable.
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at
every 4 GB of data when played back with another device.
≥ It may not play back smoothly when the editing of scenes was done with the HD Writer AE
4.0, but it will play back smoothly if you set the seamless settings in the HD Writer AE 4.0.
Refer to the operating instructions for the HD Writer AE 4.0.
Principal reasons for not playing back smoothly
≥ When the scenes were recorded on different dates
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When deleting scenes
≥ When selected scenes are copied between an SD card and the built-in memory
≥ When selected scenes are copied to a disc in a connected DVD burner
≥ When scenes recorded with more than 99 scenes on the same date
148
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 149 ページ
2011年12月28日 水曜日 午前10時21分
Others
Cautions for use
About this unit
The unit and the SD card become
warm during use. This is not a
malfunction.
Keep this unit as far away as possible
from electromagnetic equipment (such
as microwave ovens, TVs, video games
etc.).
≥ If you use this unit on top of or near a TV,
the pictures and/or sound on this unit may
be disrupted by electromagnetic wave
radiation.
≥ Do not use this unit near cell phones
because doing so may result in noise
adversely affecting the pictures and/or
sound.
≥ Recorded data may be damaged, or
pictures may be distorted, by strong
magnetic fields created by speakers or
large motors.
≥ Electromagnetic wave radiation generated
by microprocessors may adversely affect
this unit, disturbing the pictures and/or
sound.
≥ If this unit is adversely affected by
electromagnetic equipment and stops
functioning properly, turn this unit off and
remove the battery or disconnect AC
adaptor. Then reinsert the battery or
reconnect AC adaptor and turn this unit
on.
Do not use this unit near radio
transmitters or high-voltage lines.
≥ If you record near radio transmitters or
high-voltage lines, the recorded pictures
and/or sound may be adversely affected.
Make sure to use the supplied cords and
cables. If you use optional accessories,
use the cords and the cables supplied
with them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile
chemicals onto the unit.
≥ If the unit is sprayed with such chemicals,
its body may be marred and the surface
finish may peel off.
≥ Do not leave rubber or plastic products in
contact with the unit for a long time.
When you use the unit in a sandy or
dusty place such as a beach, do not let
sand or fine dust get into the body and
terminals of the unit.
Also, keep the unit away from sea water.
≥ Sand or dust may damage the unit. (Care
should be taken when inserting and
removing a card.)
≥ If sea water splashes onto the unit, wipe
off the water with a well wrung cloth. Then
wipe the unit again with a dry cloth.
When carrying the unit, do not drop or
bump it.
≥ A strong impact can break the unit’s
casing, causing it to malfunction.
Cleaning
≥ Before cleaning, detach the battery or pull
the AC cable from the AC outlet, and then
wipe the unit with a soft, dry cloth.
≥ If the unit is very dirty, dip a cloth in water
and squeeze firmly, and then wipe the unit
with the damp cloth. Next, dry the unit with
a dry cloth.
≥ Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera
body or peel the surface finish. Do not use
these solvents.
≥ When using a chemical dust cloth, follow
the instructions that came with the cloth.
149
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 150 ページ
Do not use the unit for surveillance
purposes or other business uses.
≥ This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in
prolonged use.
≥ In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly
discouraged.
When you are not going to use the unit
for an extended time
≥ When storing the unit in a cupboard or
cabinet, it is recommended that you place
a desiccant (silica gel) in with it.
HC-V700M
When disposing of or giving away this
unit, note that:
≥ Formatting and deletion simply change the
file management information and cannot
be used to completely erase the data in
built-in memory of this unit. The data can
be recovered using commercially available
software or the like.
≥ We recommend that you physically format
the built-in memory before disposing of or
giving away this unit.
To physically format the built-in memory,
connect the unit via the AC adaptor, select
[SETUP] #[FORMAT MEDIA] # [BuiltinMemory] from the menu, and then press
and hold the recording start/stop button on
the screen below for about 3 seconds.
When the built-in memory data deletion
screen appears, select [YES], and then
follow the on-screen instructions.
≥ Please look after the data in your built-in
memory carefully. Panasonic will not be
held responsible in the unlikely case that
private data is divulged.
150
VQT3Y41
2011年12月28日 水曜日 午前10時21分
About the battery
The battery used in this unit is a
rechargeable lithium-ion battery. It is
susceptible to humidity and temperature and
the effect increases the more the
temperature rises or falls. In cold areas, the
full charge indication may not appear or the
low battery indication may appear about
5 minutes after starting use. At high
temperatures, the protection function may
be triggered, making it impossible to use the
unit.
Be sure to detach the battery after use.
≥ If the battery is left attached, a minute
amount of current continues to flow even if
the unit is off. Keeping the unit in this state
may result in over discharge of the battery.
This may result in you not being able to
use the battery even after it is charged.
≥ The battery should be stored in the vinyl
bag so metal does not come into contact
with the terminals.
≥ The battery should be stored in a cool
place free from humidity, with as constant
temperature as possible. (Recommended
temperature: 15 °C to 25 °C (59 °F to
77 °F), Recommended humidity: 40%RH
to 60%RH)
≥ Extremely high temperatures or low
temperatures will shorten the life of the
battery.
≥ If the battery is kept in high-temperature,
high-humidity, or oily-smoky places, the
terminals may rust and cause
malfunctions.
≥ To store the battery for a long period of
time, we recommend you charge it once
every year and store it again after you
have completely used up the charged
capacity.
≥ Dust and other matter attached to the
battery terminals should be removed.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 151 ページ
Prepare spare batteries when going out
for recording.
≥ Prepare batteries enough to last for 3 to 4
times the period you are planning to
record for. Cold places such as a ski resort
can shorten recording time.
If you drop the battery accidentally,
check to see if the terminals are
damaged.
≥ Inserting a battery with damaged terminals
can damage the unit.
Do not throw an old battery into fire.
≥ Heating a battery or throwing it into a fire
may result in an explosion.
If the operating time is very short even
after the battery has been recharged, the
battery has worn out. Please purchase a
new battery.
About the AC adaptor
≥ If the temperature of the battery is
extremely high or extremely low, charging
may take time or the battery may not be
charged.
≥ If you use the AC adaptor near a radio,
radio reception may be disturbed. Keep
the AC adaptor 1 m (3.3 feet) or more
away from the radio.
≥ When using the AC adaptor, it may
generate whirring sounds. However, this is
normal.
≥ After use, be sure to disconnect the AC
adaptor. (If it is left connected, a minute
amount of current is consumed.)
≥ Always keep the electrodes of the AC
adaptor and battery clean.
2011年12月28日 水曜日 午前10時21分
About status indicator during
charging
When the status indicator is flashing at a
particularly fast or slow rate, the
following should be considered.
Flashing with approx. 4 second period
(off for approx. 2 seconds, on for approx.
2 seconds):
≥ When the battery is over discharged or the
temperature of the battery is too high or
low. It can be charged, but it may take a
few hours to complete the charging
normally.
≥ It will flash in approx. 2 second intervals
when normal charging resumes. Even in
such cases, it may start flashing in approx.
4 second intervals until charging is
completed depending on the conditions of
use.
Flashing with approx. 0.5 second period
(off for approx. 0.25 second, on for
approx. 0.25 second):
≥ The battery is not charged. Remove the
battery from the unit, and try charging
again.
≥ Check that the terminals of the unit or
battery are not dirty or covered with a
foreign object, and connect the battery
correctly once again. If a foreign object or
dirt is present, turn off the unit before
removing.
≥ The battery or environment is at an
extremely high or low temperature. Wait
until the temperature has returned to an
appropriate level and try charging again. If
you are still unable to charge, there may
be a fault in the unit, battery or AC
adaptor.
Off:
≥ Charging has finished.
≥ If the status indicator stays off despite the
charging being unfinished, there may be a
fault in the unit, battery or AC adaptor.
Refer to page 150 for details on the
battery.
151
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 152 ページ
About 3D
About 3D recording
Attach the 3D Conversion Lens securely.
It must not be used with an insecure
attachment.
Do not use the 3D Conversion Lens
without adjusting it first.
≥ It will not be possible to record 3D image
correctly, and this may lead to tiredness or
discomfort.
≥ When you re-attach the 3D Conversion
Lens after removing it, we recommend
making the adjustments again.
With the 3D Conversion Lens attached,
do not record a subject at less than the
minimum focus distance.
≥ The 3D effects may be more pronounced,
and therefore cause tiredness or
discomfort.
≥ The minimum focus distance is approx.
1.2 m (3.9 feet).
When recording with the 3D Conversion
Lens attached, be careful not to shake
the unit.
≥ Tiredness or discomfort may result if the
shake is pronounced, due to riding in a
vehicle or walking etc.
≥ When moving the unit as you record,
move it slowly.
≥ We recommend using a tripod.
About 3D viewing
Anyone who is hyper sensitive to light,
suffers from heart disease or is otherwise
unwell should avoid viewing 3D image.
≥ Doing may have an adverse affect on
such medical conditions.
If you feel tired, uncomfortable or
otherwise strange when viewing 3D
image, stop viewing at once.
≥ Continuing to view may cause illness.
≥ Please rest appropriately after stopping
the viewing.
152
VQT3Y41
2011年12月28日 水曜日 午前10時21分
When viewing 3D image, we recommend
taking a break every 30 to 60 minutes.
≥ Viewing for extended periods may cause
eye-fatigue.
Short-sighted or far-sighted persons,
those with differences in the sight of their
right and left eyes, and those with
astigmatism are advised to correct their
vision by wearing glasses etc.
Stop viewing if you can clearly see a
double image while viewing a 3D image.
≥ There are differences in the way that
different people experience 3D images.
Please correct your sight appropriately
before viewing 3D image.
≥ You can change the 3D setting of your
television or 3D output setting of the unit
to 2D.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 153 ページ
About the SD card
When disposing of or giving away the SD
card, note that:
≥ Formatting and deletion of this unit or
computer only changes the file
management information and does not
completely delete the data in the SD card.
≥ It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
HC-V700
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] # [FORMAT CARD] # [YES]
from the menu, and then press and hold
the recording start/stop button on the
screen below for about 3 seconds. When
the SD card data deletion screen appears,
select [YES], and then follow the onscreen instructions.
HC-V700M
2011年12月28日 水曜日 午前10時21分
LCD monitor
≥ When the LCD monitor gets dirty, wipe it
with a soft cloth such as eye glass cleaner.
≥ Do not touch the LCD monitor with your
finger nails, or rub or press with strong
force.
≥ It may become hard to see or hard to
recognize the touch when the LCD
protection sheet is affixed.
≥ In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth such
as eye glass cleaner.
≥ When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the unit is turned
on. The normal brightness will be restored
when the unit’s internal temperature rises.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
460,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] #[FORMAT MEDIA] # [SD
CARD] from the menu, and then press
and hold the recording start/stop button on
the screen below for about 3 seconds.
When the SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
≥ The customer is responsible for the
management of the data in the SD card.
153
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 154 ページ
About personal information
After you have set up the Face Recognition
function, personal information will be held in
this unit and included in recorded images.
≥ When the unit is serviced, or given away/
disposed of, the personal information
should be deleted in the interests of
protecting personal information. (l 97)
Indemnity
≥ Information, including personal
information, may be changed or lost as a
result of mistaken operation, static
electricity effects, accident, breakage,
repair or other handling.
It should be noted before use that
Panasonic does not accept any
responsibility for direct or indirect
problems which occur as the result of the
change to or loss of the information
including personal information.
2011年12月28日 水曜日 午前10時21分
About condensation
When condensation forms on the unit, the
lens will cloud up and the unit may not work
properly. Make every effort to ensure that
condensation does not form. If it does form,
take the actions described below.
Causes of condensation
Condensation takes place when the
ambient temperature or humidity is
changed as follows.
≥ When this unit is brought inside from the
cold (e.g. a ski slope) to a warm room.
≥ When this unit is moved from an
air-conditioned car to outside.
≥ When a cold room has been warmed up
quickly.
≥ When cool wind from an air conditioner is
directly blown onto this unit.
≥ After rain showers.
≥ When this unit is in a very humid place
where the air is thick with steam. (e.g. a
heated swimming pool)
Helpful hint
If, for example, you have used this unit for
recording on a ski slope and are taking it into
a heated room, place the unit inside a plastic
bag, remove as much of the air from inside
the bag as possible, then seal the bag.
Leave the unit for about an hour in the room
so the temperature of the unit is close to the
ambient temperature of the room, then use
it.
154
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 155 ページ
2011年12月28日 水曜日 午前10時21分
Others
About copyright
∫ Carefully observe copyright
laws
Whatever you have recorded and created
can be used for your personal
entertainment only. Under copyright
laws, other materials cannot be used
without obtaining permission from the
holders of the copyrights.
∫ Licenses
≥ SDXC Logo is a trademark of SD-3C,
LLC.
≥ “AVCHD”, “AVCHD Progressive” and the
“AVCHD Progressive” logo are trademarks
of Panasonic Corporation and Sony
Corporation.
≥ Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
≥ HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
≥ VIERA Link™ is a trademark of Panasonic
Corporation.
≥ EZ Sync™ is a trademark of Panasonic
Corporation.
≥ HDAVI Control™ is a trademark of
Panasonic Corporation.
≥ x.v.Color™ is a trademark.
≥ Microsoft®, Windows® and Windows
Vista® are either registered trademarks or
trademarks of Microsoft Corporation in the
United States and/or other countries.
≥ Microsoft product screen shot(s) reprinted
with permission from Microsoft
Corporation.
≥ IBM and PC/AT are registered trademarks
of International Business Machines
Corporation of the U.S.
≥ Intel®, Pentium®, Celeron® and
Intel®Core™ are trademarks of Intel
Corporation in the U.S. and/or other
countries.
≥ AMD Athlon™ is a trademark of Advanced
Micro Devices, Inc.
≥ iMovie, Mac and Mac OS are trademarks
of Apple Inc. registered in the U.S. and
other countries.
≥ NVIDIA and 3D VISION are either
registered trademarks or trademarks of
NVIDIA Corporation in the United States
and/or other countries.
≥ Other names of systems and products
mentioned in these instructions are
usually the registered trademarks or
trademarks of the manufacturers who
developed the system or product
concerned.
This product is licensed under the AVC
patent portfolio license for the personal and
non-commercial use of a consumer to (i)
encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode
AVC Video that was encoded by a consumer
engaged in a personal and non-commercial
activity and/or was obtained from a video
provider licensed to provide AVC Video. No
license is granted or shall be implied for any
other use. Additional information may be
obtained from MPEG LA, LLC.
See http://www.mpegla.com.
155
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 156 ページ
2011年12月28日 水曜日 午前10時21分
Others
Recording modes/approximate
recordable time
≥ SD cards are only mentioned with their main memory size. The stated times are the
approximate recordable times for continuous recording.

Recording mode
Picture size/
frame rate
SD card
[1080/60p]

[1080/60i]
[HA]
[HG]
[HX]
[HE]
1920k1080/ 1920k1080/ 1920k1080/ 1920k1080/ 1920k1080/
60p
60i
60i
60i
60i
4 GB
19 min
30 min
40 min
1h
1 h 30 min
16 GB
1 h 20 min
2h
2 h 40 min
4 h 10 min
6 h 40 min
64 GB
5 h 20 min
8 h 30 min
11 h
16 h 50 min
27 h 30 min
16 GB
1 h 20 min
2h
2 h 40 min
4 h 10 min
6 h 40 min
HC-V700M
Built-in
memory
A Favors image quality
B Favors Recording time
Recording mode
[iFrame]
[SbS 3D]
Picture size/
frame rate
960k540/
30p
1920k1080/
60i
30 min
SD card
4 GB
19 min
16 GB
1 h 20 min
2h
64 GB
5 h 20 min
8 h 30 min
16 GB
1 h 20 min
2h
HC-V700M
Built-in
memory
≥ If recording for long periods, prepare batteries for 3 or 4 times the period you wish to record
for. (l 22)
≥ The default setting is [HG] Mode.
≥ Maximum continuously recordable time for one scene: 6 hours
≥ The recording is paused once when the recording time for one scene exceeds 6 hours, and
the recording will automatically resume after a few seconds.
≥ The recordable time may be reduced if recording with a lot of action is recorded or
recording of short scene is repeated.
≥ Use time in the row of 4 GB in above table as a guideline for the time that can be copied
onto one DVD disc (4.7 GB).
156
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 157 ページ
2011年12月28日 水曜日 午前10時21分
Others
Approximate number of recordable
pictures
≥ SD cards are only mentioned with their main memory size. The stated number is the
approximate number of recordable pictures.
6.1M
Picture size
Aspect ratio
SD card
HC-V700M
2.3M
2848k2136
4 GB
16 GB
64 GB
1760k1320
4:3
1100
2800
4700
11500
18500
47000
16 GB
4700
11500
0.3M
640k480
28000
118000
475000
118000
Built-in memory
6.1M
Picture size
Aspect ratio
SD card
HC-V700M
4 GB
16 GB
64 GB
2.3M
5.8 M
2.1 M
3024k2016 1872k1248 3200k1800 1920k1080
3:2
16:9
1100
2800
1200
3100
4700
11500
5000
13000
18500
47000
20000
52000
16 GB
4700
11500
5000
13000
Built-in memory
When recording 3D still pictures
2.1 M
Picture size
4 GB
16 GB
64 GB
1920k1080
16:9
1000
4300
17500
16 GB
4300
Aspect ratio
SD card
HC-V700M
Built-in memory
≥ The number of recordable pictures depends on the subject being recorded.
≥ When recording a 3D still picture, the equivalent 2D still picture is recorded as well;
therefore, the number of recordable pictures will be reduced accordingly.
≥ Maximum number of recordable pictures that can be displayed is 9999. If the number of
recordable pictures exceeds 9999, R 9999+ is displayed. The number will not change
when the picture is taken until the number of recordable pictures is 9999 or less.
≥ The memory capacity indicated on the label of an SD card is the total of the capacity for
copyright protection and management and the capacity that can be used on the unit, a PC
etc.
157
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 158 ページ
2011年12月28日 水曜日 午前10時21分
Others
Specifications
High Definition Video Camera
Information for your safety
Power source:
DC 5.0 V (When using AC adaptor)
DC 3.6 V (When using battery)
Power consumption:
Recording;
6.7 W
Charging;
7.7 W
Motion picture recording format:
[AVCHD]; AVCHD format version 2.0 compliant (AVCHD Progressive)
[iFrame];
MPEG-4 AVC file format compliant (.MP4)
Motion picture compression:
MPEG-4 AVC/H.264
Audio compression:
[AVCHD];
Dolby Digital/2 ch
[iFrame], [MP4];
AAC/2 ch
Recording mode and transfer rate:
[1080/60p]; Maximum 28 Mbps (VBR)
[HA];
Average 17 Mbps (VBR)
[HG];
Average 13 Mbps (VBR)
[HX];
Average 9 Mbps (VBR)
[HE];
Average 5 Mbps (VBR)
[iFrame];
Maximum 28 Mbps (VBR)
[SbS 3D]; Average 17 Mbps (VBR)
For picture size and recordable time of a motion pictures, refer to page 156.
Still picture recording format:
JPEG (Design rule for Camera File system, based on Exif 2.2 standard)
MPO format compatible (3D still pictures)
For picture size of a still picture, refer to page 70, and for number of recordable pictures,
refer to page 157.
Recording media:
SD Memory Card (FAT12 and FAT16 system compliant)
SDHC Memory Card (FAT32 system compliant)
SDXC Memory Card (exFAT system compliant)
Refer to page 23 for details on SD cards usable in this unit.
HC-V700M
Built-in memory; 16 GB
158
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 159 ページ
2011年12月28日 水曜日 午前10時21分
Image sensor:
1/2.33 z 1MOS image sensor
Total; 15300 K
Effective pixels;
Motion picture; 3550 K to 2580 K (16:9)
Still picture;
2790 K (4:3), 2790 K (3:2), 3550 K to 2580 K (16:9)
Lens:
Auto Iris, 21k Optical Zoom, F1.8 to F3.5
Focal length;
2.82 mm to 59.2 mm
Macro (Full range AF)
35 mm equivalent;
Motion picture; 28 mm to 717.4 mm (16:9)
Still picture;
34.7 mm to 728.7 mm (4:3), 34.1 mm to 715.2 mm (3:2),
28 mm to 717.4 mm (16:9)
Minimum focus distance;
Normal;
Approx. 3.0 cm (1.2q) (Wide)/Approx. 1.5 m (4.9 feet) (Tele)
Tele Macro;
Approx. 60 cm (24q) (Tele)
Intelligent Auto Macro; Approx. 1 cm (0.4q) (Wide)/Approx. 60 cm (24q) (Tele)
Filter diameter:
46 mm
Zoom:
i.Zoom OFF 26k, 46k i.Zoom, 60k/1500k Digital Zoom
(Using image sensor effective area)
Image stabilizer function:
Optical (Hybrid Optical Image Stabilizer, Active Mode (Rotation correction), Optical Image
Stabilizer Lock function)
Monitor:
3.0z wide LCD monitor (Approx. 460 K dots)
Microphone:
Stereo (with a Zoom Microphone Function)
Speaker:
1 round speaker, dynamic type
White balance adjustment:
Auto tracking white balance system
Standard illumination:
1,400 lx
Minimum required illumination:
Approx. 4 lx (1/30 with Low Light Mode in the Scene Mode)
Approx. 1 lx with the Color Night Rec function
AV multi connector video output level:
Component video output level;
Y; 1.0 Vp-p, 75 h
Pb; 0.7 Vp-p, 75 h
Pr; 0.7 Vp-p, 75 h
AV video output level;
1.0 Vp-p, 75 h, NTSC system
159
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 160 ページ
2011年12月28日 水曜日 午前10時21分
HDMI mini connector video output level:
HDMI™ (x.v.Color™) 1080p/1080i/480p
AV multi connector audio output level (Line):
316 mV, 600 h, 2 ch
HDMI mini connector audio output level:
[AVCHD];
Dolby Digital/Linear PCM
[iFrame], [MP4];
Linear PCM
MIC input:
j70 dBV (Mic sensitivity j50 dB equivalent, 0 dB=1 V/Pa, 1 kHz)
(Stereo mini jack)
USB:
Reader function
SD card; Read only (No copyright protection support)
HC-V700M
Built-in memory; Read only
Hi-Speed USB (USB 2.0), USB terminal Type Mini AB
USB host function (for DVD burner)
Battery charging function (Charges from USB terminal when the main unit is off)
Flash:
Available range; Approx. 1.0 m to 2.5 m (3.3 feet to 8.2 feet)
Dimensions:
55 mm (W)k69 mm (H)k119.5 mm (D)
[2.165 q (W)k2.717 q (H)k4.705 q (D)] (including projecting parts)
Mass (Weight):
HC-V700
Approx. 270 g (Approx. 0.595 lbs.)
[without battery (supplied) and an SD card (optional)]
HC-V700M
Approx. 271 g (Approx. 0.597 lbs.)
[without battery (supplied)]
Mass (Weight) in operation:
HC-V700
Approx. 314 g (Approx. 0.692 lbs.)
[with battery (supplied) and an SD card (optional)]
HC-V700M
Approx. 313 g (Approx. 0.690 lbs.)
[with battery (supplied)]
Operating temperature:
0 °C to 40 °C (32 °F to 104 °F)
Operating humidity:
10%RH to 80%RH
Battery operation time:
See page 22
160
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 161 ページ
2011年12月28日 水曜日 午前10時21分
AC adaptor
Information for your safety
Power source:
Power consumption:
DC output:
AC 100 V to 240 V, 50/60 Hz (VSK0780)
AC 110 V to 240 V, 50/60 Hz (VSK0781)
12 W
DC 5.0 V, 1.6 A
Dimensions:
49 mm (W)k24 mm (H)k79 mm (D) [1.93 q (W)k0.94 q (H)k3.11 q (D)]
Mass (Weight):
Approx. 91 g (Approx. 0.20 lbs.)
∫ 3D Conversion Lens (optional)
Lens:
F2.4 (f = 1.47 mm)
35 mm equivalent; 34 mm
Minimum recording distance; Approx. 1.2 m (3.9 feet)
Minimum required illumination:
Approx. 18 lx (1/30 with Low Light Mode in the Scene Mode)
161
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 162 ページ
2011年12月28日 水曜日 午前10時21分
Others
Optional accessories
Accessory No.
Figure
Description
VW-BC10PP
Battery charger
VW-VBK180*1
Rechargeable Lithium Ion Battery
Pack
VW-VBK360*1
Rechargeable Lithium Ion Battery
Pack
RP-CDHM15
RP-CDHM30
HDMI mini cable
VW-CLT2*2
3D Conversion Lens
Step up ring
VW-W4907H*2
Wide conversion lens
VW-LF46N*2
Filter kit
*1 Please refer to page 22, concerning the battery charging time and available recording
time.
*2 Set to the flash setting to
([OFF]).
162
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 163 ページ
Accessory No.
VW-LDC103PP
*3
2011年12月28日 水曜日 午前10時21分
Figure
Description
Video DC Light
VZ-LL10PP
Light bulb for video DC light
VW-SK12PP
Shoe adaptor
VW-ACK180PP
Accessory kit
RP-SDL16GU1K
RP-SDL08GU1K
RP-SDL04GU1K
RP-SDL02GU1K
Class 4
Class 4
Class 4
Class 4
RP-SDU64GE1K
RP-SDU32GU1K
RP-SDU16GU1K
RP-SDU08GU1K
RP-SDU04GU1K
Class 10
Class 10
Class 10
Class 10
Class 10
VW-BN01
DVD burner
16 GB SDHC Memory Card
8 GB SDHC Memory Card
4 GB SDHC Memory Card
2 GB SD Memory Card
64 GB SDXC Memory Card
32 GB SDHC Memory Card
16 GB SDHC Memory Card
8 GB SDHC Memory Card
4 GB SDHC Memory Card
*3 To use the VW-LDC103PP, the battery pack/VW-VBG130, VW-VBG260 is required. To
charge the battery pack/VW-VBG130, VW-VBG260, the AC adaptor/VW-AD21PP-K,
VW-AD20PP-K is required.
NOTE:
Accessories and/or model numbers may vary by country. Please consult your local dealer.
Product numbers correct as of Dec. 2011. These may be subject to change.
163
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 164 ページ
2011年12月28日 水曜日 午前10時21分
∫ Attaching the conversion lens/filter kit
Attach the wide conversion lens (VW-W4907H: optional), ND filter or MC protector of the
Filter kit (VW-LF46N: optional) in front of the lens.
≥ You will not be able to use the flash. Set the flash setting to
([OFF]). (l 58)
Be careful about the following.
When 2 lens accessories, such as the ND filter and wide conversion lens, are fitted and
the zoom lever is pressed toward the W side, the 4 corners of an image will be darkened.
(Vignetting)
Attaching the lens cap of the Filter Kit (VW-LF46N: optional)
≥ When the filter kit (VW-LF46N: optional) is used, protect the lens surface while the unit is
not used with the lens cap supplied with the filter kit.
∫ Attaching the supplied shoe adaptor
Insert the shoe adaptor into the shoe adaptor mount.
When removing the shoe adaptor, slide the SHOE ADAPTOR RELEASE lever, and
remove the shoe adaptor while sliding the lever.
SHOE
ADAPTOR
RELEASE
164
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 165 ページ
2011年12月28日 水曜日 午前10時21分
Accessory Order Form (For USA and Puerto Rico Customers)
Please photocopy this form when placing an order.
1. Model #
2. Items Ordered
Accessory #
Description
Price Each
Quantity
Total Price
Shipping & Handling
$6.95
Subtotal
Your State & Local Sales Tax
Total
3. Method of payment (check one)
American Express
VISA
Credit Card #
MasterCard
Expiration Date
Discover
Customer Signature
(Please do not send cash)
4. Shipping information (UPS delivery requires complete street address)
Ship To:
Mr.
Mrs.
Ms.
First
Phone#:
Last
Day
(
)
Night
(
)
Street Address
City
State
Zip
TO OBTAIN ANY OF OUR ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-6 PM M-F, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER
20421 84th Ave. S., Kent, WA 98032
In CANADA, please contact your local Panasonic dealer for more information on
Accessories.
165
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 166 ページ
2011年12月28日 水曜日 午前10時21分
Others
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Camcorder Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will,
for the length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.
Product or Part Name
Camcorder
SD Memory Cards, Rechargeable Batteries
(defective exchange)
Parts
Labor
1 year
90 days
90 days
Not Applicable
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies
to products purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold “as is”.
Carry-In or Mail-In Service
To find a service center please visit http://www.panasonic.com/help or call 1-800-211-PANA
(7262).
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s
Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping
Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as
Panasonic is committed to providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number where you can be reached.
A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are caused by products not
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of
consumer controls, improper maintenance, power line surge, lightning damage, modification,
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or
other business or rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of God.
166
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 167 ページ
2011年12月28日 水曜日 午前10時21分
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or
damage to media or images, data or other memory or recorded content. The items listed are not
exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after the warranty period, you
may contact your dealer or Service Center. If the problem is not handled to your satisfaction,
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products
by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave. S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of January 2012
167
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 168 ページ
2011年12月28日 水曜日 午前10時21分
Others
Warranty (For Canadian Customers)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under
normal use and for a period as stated below from the date of original purchase agrees to, at its option
either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will
be made by Panasonic Canada Inc.
Camcorder Products - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold
“as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE
RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND
PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result
from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other
business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is
attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty. Rechargeable batteries are
warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT
OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty
excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other
memory or recorded content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions
may not be applicable. This warranty gives you specific legal rights and you may have other rights which
vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
Our Customer Care Centre:
Telephone: 1-800-995-8649
Fax #: (905) 238-2360
Email link: camcorderconcierge@ca.panasonic.com
For defective product exchange within the warranty period, please contact the original dealer or our
Customer Care Centre.
168
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 169 ページ
2011年12月28日 水曜日 午前10時21分
Others
Useful Information
(Only For Latin American Countries)
Customer Service
Customer Service Directory
Obtain product information and operative assistant; localize the closer distributor or
Service Center; buy spare parts and accessories by our web site to Latin American:
http://www.lar.panasonic.com
Also you may contact us directly by our Contact Center:
Panama
Colombia
Ecuador
Costa Rica
El Salvador
Guatemala
Chile
Venezuela
Uruguay
Peru
Argentina
Paraguay
800-PANA (800-7262)
01-8000-94PANA (01-8000-947262)
1800-PANASONIC (1800-726276)
800-PANA737 (800-7262737)
800-PANA (800-7262)
1-801-811-PANA (1-801-811-7262)
800-390-602
From a cell phone: 797-5000
800-PANA-800 (800-7262-800)
0-800-PANA (0-800-7262)
0800-00726
0800-333-PANA (0800-333-7262)
0810-321-PANA (0810-321-7262) 0800-11-PANA (0800-11-7262)
Mexico Service
To obtain information in the Republic of Mexico contact us at:
email: atencion.clientes@mx.panasonic.com
Or you may contact us in the next following phones numbers:
01800-VIP-PANA (01800-847-7262) - Interior
(55) 5000-1200 - Mexico D.F. and Metropolitan Area
169
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 170 ページ
2011年12月28日 水曜日 午前10時21分
Index
∫ Numerics
∫D
1080/60p recording . . . . . . . . . . . . . . . 51
3D Conversion Lens setup . . . . . . . . . . 78
3D playback/viewing . . . . . . . . . 106, 152
3D recording . . . . . . . . . . . . . . . . 78, 152
3D storage . . . . . . . . . . . . . . . . . . . . 123
Date and time display . . . . . . . . . . . . . .42
Date and time setting . . . . . . . . . . . . . .28
Delete . . . . . . . . . . . . . . . . . . . . . . . . .93
Deleting part of a scene . . . . . . . . . . . .94
Deleting personal information . . . . . . . .97
Demo mode . . . . . . . . . . . . . . . . . . . . .48
Digital cinema color . . . . . . . . . . . . . . .68
Digital zoom . . . . . . . . . . . . . . . . . . . . .62
Direct playback . . . . . . . . . . . . . . . . . .82
Disc status . . . . . . . . . . . . . . . . . . . . . 118
Divide . . . . . . . . . . . . . . . . . . . . . . . . .95
DVD burner . . . . . . . . . . . . . . . . . . . . 112
∫A
AC adaptor . . . . . . . . . . . . . . . . . 21, 151
Adjusting 3D effect of the
3D image . . . . . . . . . . . . . . . . . . . . . 108
AF assist lamp . . . . . . . . . . . . . . . . . . . 73
AF/AE tracking . . . . . . . . . . . . . . . . . . 53
Alert sound . . . . . . . . . . . . . . . . . . . . . 44
Approximate number of recordable
pictures . . . . . . . . . . . . . . . . . . . . . . . 157
Aspect ratio . . . . . . . . . . . . . . . . . . . . . 71
Auto Cursor Position . . . . . . . . . . . . . . 46
Auto focus . . . . . . . . . . . . . . . . . . . . . . 36
Auto Ground-Directional Standby
(AGS) . . . . . . . . . . . . . . . . . . . . . . . . . 67
Auto protect . . . . . . . . . . . . . . . . . . . . 118
Auto slow shutter (2D) . . . . . . . . . . . . . 67
Auto slow shutter (3D) . . . . . . . . . . . . . 67
Automatic face framing . . . . . . . . . . . . 66
Automatic white balance . . . . . . . . . . . 36
AV multi connector . . . . . . . . 17, 100, 122
AV multi connector output . . . . . . . . . 103
AVCHD . . . . . . . . . . . . . . . . . . . . . . . . . 8
∫B
Backlight compensation . . . . . . . . . . . . 59
Battery . . . . . . . . . . . . . . . . . . . . 20, 150
Battery capacity indication . . . . . . . . . . 22
Built-in memory . . . . . . . . . . . . . . . . . . . 8
∫C
Cancel protect . . . . . . . . . . . . . . . . . . 118
Card . . . . . . . . . . . . . . . . . . . . . . 23, 153
Card status . . . . . . . . . . . . . . . . . . . . . 47
Changing the display style . . . . . . . . . . 42
Charging time . . . . . . . . . . . . . . . . . . . 22
Cleaning . . . . . . . . . . . . . . . . . . . . . . 149
Color night rec function . . . . . . . . . . . . 60
Component out . . . . . . . . . . . . . . . . . 103
Conversion assist function . . . . . . . . . 126
Convert 2D to 3D . . . . . . . . . . . . . . . . 108
Copy
Disc . . . . . . . . . . . . . . . . . . . . . . . 114
Dubbing . . . . . . . . . . . . . . . . 119, 122
Dubbing (3D) . . . . . . . . . . . . . . . . 123
From built-in memory to
SD card . . . . . . . . . . . . . . . . . . . . 110
From SD card to built-in
memory . . . . . . . . . . . . . . . . . . . . 110
Creating still picture from motion
picture . . . . . . . . . . . . . . . . . . . . . . . . . 82
Custom effect . . . . . . . . . . . . . . . . . . . 87
170
VQT3Y41
∫E
Economy (AC adaptor) . . . . . . . . . . . . .43
Economy (Battery) . . . . . . . . . . . . . . . .43
Effect setup . . . . . . . . . . . . . . . . . . . . .87
EXT. display . . . . . . . . . . . . . . . . . . . .102
Extra Optical Zoom . . . . . . . . . . . . . . .49
∫F
Face recognition . . . . . . . . . . . . . . . . .63
Fade . . . . . . . . . . . . . . . . . . . . . . . . . .56
Fade color . . . . . . . . . . . . . . . . . . . . . .56
Favorite scene . . . . . . . . . . . . . . . . . . .89
Flash . . . . . . . . . . . . . . . . . . . . . . . . . .58
Flash level . . . . . . . . . . . . . . . . . . . . . .58
Focus . . . . . . . . . . . . . . . . . . . . . .33, 77
Format disc . . . . . . . . . . . . . . . . . . . . 117
Formatting . . . . . . . . . . . . . . . 46, 47, 117
Frame-by-frame playback . . . . . . . . . . .81
∫G
Gain . . . . . . . . . . .
Grip belt . . . . . . . . .
Guide display . . . . .
Guidelines . . . . . . .
. . . . . . . . . . . . . . .76
. . . . . . . . . . . . . . .19
. . . . . . . . . . . . . . .40
. . . . . . . . . . . . . . .59
∫H
HD Writer AE 4.0 . . . . . . . . . . . .125, 136
HDMI mini connector . . . . . .17, 100, 104
HDMI resolution . . . . . . . . . . . . . . . . .103
Highlight & Time frame index . . . . . . . .82
Highlight playback . . . . . . . . . . . . . . . .86
Hi-speed burst shooting mode . . . . . . .72
Hybrid O.I.S. . . . . . . . . . . . . . . . . . . . .50
∫I
i.Zoom . . . . . . . . . . . . . . . . . . . . . . . . .62
iFrame . . . . . . . . . . . . . . . . . . . . . . . . . .8
Image stabilizer function . . . . . . . . . . . .50
Indications . . . . . . . . . . . . . . . . . . . . .138
Initial setting . . . . . . . . . . . . . . . . . . . . .46
Intelligent Auto Mode . . . . . . . . . . . . . .35
Intelligent contrast control . . . . . . . . . . .56
Intelligent exposure . . . . . . . . . . . . . . .59
Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 171 ページ
∫L
Language . . . . . . . . . . . . . . . . . . . . . . 48
LCD monitor . . . . . . . . . . . . . . . . 18, 153
LCD set . . . . . . . . . . . . . . . . . . . . . . . . 45
Lens cap . . . . . . . . . . . . . . . . . . . . . . 164
Limited Warranty (Canada) . . . . . . . . 168
Limited Warranty
(USA and Puerto Rico) . . . . . . . . . . . 166
∫M
Manual focus . . . . . . . . . . . . . . . . . . . . 77
Manual recording . . . . . . . . . . . . . . . . . 74
Media select . . . . . . . . . . . . . . . . . . . . 30
Media status . . . . . . . . . . . . . . . . . . . . 47
Menu . . . . . . . . . . . . . . . . . . . . . . . . . 40
MF assist . . . . . . . . . . . . . . . . . . . . . . 77
Microphone level . . . . . . . . . . . . . . . . . 69
Microphone terminal . . . . . . . . . . . . . . 17
Mode switch . . . . . . . . . . . . . . . . . . . . 26
Motion picture compatibility . . . . . . . . . 39
Music select . . . . . . . . . . . . . . . . . . . . 87
∫N
Name display . . . . . . . . . . . . . . . . . . . 66
Number reset . . . . . . . . . . . . . . . . . . . 46
∫O
O.I.S. LOCK . . . . . . . . . . . . . . . . . . . . 54
O.I.S. lock display . . . . . . . . . . . . . 42, 54
Operation icons . . . . . . . . . . . . . . . . . . 55
Optical image stabilizer demo . . . . . . . . 48
∫P
Partially delete . . . . . . . . . . . . . . . . . . . 96
Picture adjustment . . . . . . . . . . . . . . . . 70
Picture size . . . . . . . . . . . . . . . . . . . . . 70
Playback operations . . . . . . . . . . . . . . 81
Playback zoom . . . . . . . . . . . . . . . . . . 83
Playing back motion pictures/
still pictures by date . . . . . . . . . . . . . . . 85
Power button . . . . . . . . . . . . . . . . . . . . 25
Power LCD . . . . . . . . . . . . . . . . . . . . . 45
PRE-REC . . . . . . . . . . . . . . . . . . . . . . 56
Protect . . . . . . . . . . . . . . . . . . . . . . . . 97
∫Q
Quick power on . . . . . . . . . . . . . . . . . . 43
Quick start . . . . . . . . . . . . . . . . . . . . . . 43
∫R
Recordable time . . . . . . . . . . . . . 22, 156
Recording button icon . . . . . . . . . . . . . 29
Recording format . . . . . . . . . . . . . . . 8, 62
Recording modes . . . . . . . . . . . . . . . . 62
Recording time elapsed . . . . . . . . . . . . 31
Recovery . . . . . . . . . . . . . . . . . . . . . . 142
Red-eye reduction . . . . . . . . . . . . . . . . 58
Relay information canceling . . . . . . . . . 99
Relay recording . . . . . . . . . . . . . . . . . . 63
Relay scene combining . . . . . . . . . . . . 98
Remaining number of still pictures . . . . 34
Remaining time left for recording . . . . . 31
2011年12月28日 水曜日 午前10時21分
Repeat playback . . . . . . . . . . . . . . . . .83
Resume playback . . . . . . . . . . . . . . . . .83
∫S
Scene mode . . . . . . . . . . . . . . . . . . . .61
Scene protect . . . . . . . . . . . . . . . . . . . .97
SD Memory Card . . . . . . . . . . . . . . . . .23
SD Speed Class Rating . . . . . . . . . . . .23
SDHC Memory Card . . . . . . . . . . . . . .23
SDXC Memory Card . . . . . . . . . . . . . . .23
Select operation icons . . . . . . . . . . . . .44
Self-recording . . . . . . . . . . . . . . . . . . .29
Self-timer recording . . . . . . . . . . . . . . .58
Shoe adaptor . . . . . . . . . . . . . . . .18, 164
Shooting guide . . . . . . . . . . . . . . . . . . .68
Shutter sound . . . . . . . . . . . . . . . . . . .73
Shutter speed . . . . . . . . . . . . . . . . . . .76
Simultaneous recording . . . . . . . . .34, 79
Skip playback . . . . . . . . . . . . . . . . . . . .81
Slide show . . . . . . . . . . . . . . . . . . .38, 91
Slow-motion playback . . . . . . . . . . . . . .81
Smile shot . . . . . . . . . . . . . . . . . . . . . .57
Step up ring . . . . . . . . . . . . . . . . . . . . .78
Still picture compatibility . . . . . . . . . . . .39
∫T
Tele macro . . . . . . . . . . . . . . . . . . . . . .59
Title setup . . . . . . . . . . . . . . . . . . . . . .90
Touch function icons . . . . . . . . . . . . . . .52
Touch Menu . . . . . . . . . . . . . . . . . . . . .27
Touch screen . . . . . . . . . . . . . . . . . . . .26
Touch Shutter . . . . . . . . . . . . . . . . . . . .54
Touch Zoom . . . . . . . . . . . . . . . . . . . . .52
Tripod receptacle . . . . . . . . . . . . . . . . .19
TV aspect . . . . . . . . . . . . . . . . . . . . .102
∫U
Useful Information
(Latin American Countries) . . . . . . . . .169
∫V
Video Light . . . . . . . . . . . . . . . . . . . . . .60
VIERA Link . . . . . . . . . . . . . . . . . . . .104
Volume adjustment . . . . . . . . . . . . . . . .38
∫W
White balance . . . . . . . . . . . . . . . . . . .75
Wind noise reduction . . . . . . . . . . . . . .68
World time setting . . . . . . . . . . . . . . . .41
∫Z
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . .49
Zoom microphone . . . . . . . . . . . . . . . .69
Zoom mode . . . . . . . . . . . . . . . . . . . . .62
Zoom/rec display . . . . . . . . . . . . . . . . .42
171
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 172 ページ
2011年12月28日 水曜日 午前10時21分
Spanish Quick Use Guide/Guía
española para el uso rápido
∫ Insertar la batería
Meta la batería insertándola en la dirección
señalada en la figura.
∫ Insertar/extraer una tarjeta SD

≥ Introduzca la batería hasta que haga clic y
se cierre.
∫ Carga de la batería

Testigo de acceso [ACCESS] A
≥ Cuando el dispositivo accede a la
tarjeta SD o a la memoria integrada, se
enciende el testigo de acceso.




≥ Verificar que la lámpara de acceso se
haya apagado.
1)
A Terminal de entrada de CC
1 Conecte el cable de CA al adaptador de
CA, luego a la toma de CA.
2 Conecte el adaptador de CA al terminal
de entrada de CC.
≥ El indicador de estado parpadeará de
color rojo en un intervalo de 2 segundos
(aproximadamente 1 segundo encendido,
aproximadamente 1 segundo apagado),
indicando que comenzó la carga.
Se apagará cuando se completa la carga.
172
VQT3Y41

Abra la tapa de la tarjeta SD e
introduzca (retire) la tarjeta SD en (de)
la ranura correspondiente B.
≥ Oriente el lado de la etiqueta C en la
dirección mostrada en la ilustración e
introdúzcalo hasta el fondo.
≥ Presione el centro de la tarjeta SD, luego
sáquela recta.
2) Cierre de forma segura la tapa de la
tarjeta SD.
≥ Ciérrelo firmemente hasta que haga clic.
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 173 ページ
2011年12月28日 水曜日 午前10時21分
∫ Encender/apagar el dispositivo
∫ Selección del modo
Encender y apagar el dispositivo con el
botón de alimentación
Abra el monitor LCD y presione el botón de
alimentación para encender la unidad.
Utilice el selector de modo para cambiar el
modo a
,
o
.

Modo de grabación de
películas (l 31)
Modo de grabación de
fotografías (l 33)
A El indicador de estado se ilumina.
≥ Para apagar la unidad, mantenga pulsado
el botón de alimentación hasta que el
indicador de estado se apague.
Encendido y apagado del monitor LCD
El dispositivo se enciende al abrir el monitor
LCD, y se apaga al cerrarlo.
Para encender el dispositivo
Modo de reproducción
(l 37, 81)
∫ Cómo usar la pantalla táctil
Puede actuar directamente tocando el
monitor LCD (pantalla táctil) con el dedo.
Toque
Toque y suelte la pantalla táctil para
seleccionar el icono o la imagen.

A El indicador de estado se ilumina.
Para apagar el dispositivo

Deslice mientras toca
Mueva el dedo mientras pulsa la pantalla
táctil.
B El indicador de estado se apaga.
173
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 174 ページ
Menú táctil
Toque
para visualizar el menú de
deslizamiento.
Toque
(lado izquierdo)/
(lado
derecho) de
en el menú táctil para
cambiar los iconos de operación.
2011年12月28日 水曜日 午前10時21分
∫ Grabación de películas
1)
2)
3)
Cambie el modo a
.
Abra el monitor LCD.
Pulse el botón de inicio/parada de
grabación para iniciar la grabación.

T
T
W
W
A Menú táctil
∫ Selección del idioma
1)
2)
Toque MENU , luego toque
[CONFIGURAR] # [LANGUAGE].
Toque el idioma deseado.
∫ Seleccionar un medio para grabar
HC-V700M
1)
2)
Cambie el modo a
Seleccione el menú.
MENU
3)
oa
A Cuando comienza a grabar, ; cambia a
¥.
∫ Grabación de películas
1)
2)
3)
.
Cambie el modo a
.
Abra el monitor LCD.
Para tomar una imagen pulse el botón
a tope.
: [SELEC MEDIO]
Toque el medio para grabar las
películas o fotografías.
∫ Reproducción de película/
fotografía
≥ El medio se selecciona de forma separada
para las películas o fotografías y se
resalta en amarillo.
4) Toque [ENTRAR].
1)
2)
Cambie el modo a
.
Toque el icono de selección del modo
de reproducción A.
ALL
174
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 175 ページ
3)
HC-V700
Seleccione la imagen fija B o el formato
de grabación de la imagen en
movimiento C que desea reproducir.

≥ Para visualizar la siguiente (anterior)
página:
j Deslice la vista en miniatura hacia arriba
(hacia abajo) mientras la toca.
j Toque
(arriba)/ (abajo) en la barra
de desplazamiento de la miniatura.
5)

2011年12月28日 水曜日 午前10時21分
Seleccione la operación de
reproducción tocando el icono de
operación.
HC-V700M
Seleccione el tipo de medio D y a
continuación la imagen fija B o el
formato de grabación de la imagen en
movimiento C que desee reproducir.



≥ Toque [ENTRAR].
≥ Se visualiza un icono en la visualización
de miniatura cuando se toca el elemento
de la imagen en movimiento.
(
,
,
,
,
,
)
≥
se visualiza en las escenas 1080/60p
y
se visualiza en las escenas de lado
a lado cuando se toca [ALL AVCHD].
4) Toque la escena o la fotografía que
desea reproducir.

≥ Cambiará a la visualización de pantalla
y a la palanca de desplazamiento en
miniatura E cuando no se realice ninguna
operación durante aproximadamente
5 segundos.
0h01m30s

F Icono de funcionamiento
≥ Los iconos de operación y la visualización
de la pantalla desaparecerán cuando no
se realiza una función de toque por un
período específico de tiempo. Para volver
a visualizarla, toque la pantalla.
(Reproducción de películas)
1/;: Reproducción/Pausa
6:
Rebobinado
(durante la reproducción)
5:
Avance rápido
(durante la reproducción)
∫:
Detener la reproducción y
visualizar las miniaturas.
(Reproducción de fotografías)
1/;: Iniciar o hacer una pausa en la
presentación de diapositivas
(reproducción de las fotografías
que contiene en orden
numérico).
2;: Reproducción de la imagen
anterior.
;1: Reproducción de la siguiente
imagen.
∫:
Detener la reproducción y
visualizar las miniaturas.
175
VQT3Y41
HC-V700M&V700-PPCPU-VQT3Y41_mst.book 176 ページ
2011年12月28日 水曜日 午前10時21分
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
P
© Panasonic Corporation 2011
Printed in Japan
VQT3Y41
F1211KY0 ( 9000  )