Samsung CLX-9301NA multifunctional

SCX-812x Series
CLX-92x1 Series
CLX-9301 Series
Multi-Functional Printer
User’s Guide
imagine the possibilities
Thank you for purchasing a Samsung product.
Copyright
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for informational purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
•
•
•
•
•
•
Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
PCL and PCL 6 are trademarks of Hewlett-Packard Company.
Microsoft, Windows, Windows Vista, Windows 7 and Windows 2008 Server R2 are either registered trademarks or trademarks of Microsoft Corporation.
PostScript 3 is a trademark of Adobe System, Inc.
ABBYY® FineReader® Engine for Embedded OS © 2009 ABBYY. ABBYY FineReader - the keenest eye in OCR. ABBYY, FINEREADER and ABBYY
FineReader are registered trademarks of ABBYY Software Ltd.
All other brand or product names are trademarks of their respective companies or organizations.
Refer to the ‘LICENSE.txt’ file in the provided CD-ROM for the open source license information.
IF YOU USE THIS MACHINE TO PRODUCE AND THEN USE COUNTERFEIT CURRENCY, YOU WILL BE PUNISHED TO THE FULLEST EXTENT OF THE LAW.
REV. 1.00
Copyright_ 2
contents
COPYRIGHT
2
CONTENTS
9
14
21
23
Safety information
Regulatory information
About this user’s guide
Features of your new product
INTRODUCTION
25
25
26
27
28
29
30
31
32
33
34
34
34
35
35
35
35
36
37
Machine overview
Front view 1
Front view 2
Rear view
Inner view (CLX-92x1 Series, CLX-9301 Series)
Inner view (SCX-812x Series)
Control panel overview
Touch interaction
Understanding the status LED
Turning the machine on
Turning the machine off
Connecting a printer cable
Using a network cable
Introducing the display screen and useful buttons
Display screen
Counter button
Eco button
Job Status button
Interrupt button
MEDIA AND TRAY
38
38
38
39
39
39
39
42
44
44
45
45
46
46
46
47
47
47
47
48
48
48
48
49
Loading originals
On the scanner glass
In the duplex automatic document feeder (DADF)
Selecting print media
Guidelines to select print media
Loading paper in the tray
Standard tray / optional dual cassette feeder
Multi-purpose tray
Media sizes automatically detected
Printing on special media
Envelope
Labels
Card stock/ Custom-sized paper
Letterhead/Preprinted paper
Glossy
Tray setting
Setting the paper size
Setting the paper type
Setting the tray confirmation message
Auto tray switch
Auto continue
Paper substitution
Tray protection
Tray priority setting
3
25
38
Contents_ 3
contents
COPYING
50
50
50
51
51
51
52
52
52
52
53
53
54
55
55
55
56
57
60
60
61
62
62
62
63
64
64
64
64
Understanding the copy screen
Basic tab
Advanced tab
Image tab
Basic copy
Copying originals of different sizes
Changing the settings for each copy
Selecting the Paper Source tray
Reducing or enlarging copies
Copying multiple sides
Selecting the color mode (CLX-9201 9301 Series only)
Deciding the form of copy output
Changing the darkness
Using special copy features
Selecting the size of originals
Selecting the orientation of originals
ID card copying
N-up copying
Booklet copying
Book copying
Watermark
Stamp
Selecting the type of originals
Adjusting background
Erasing backside Images
Using a program’s setting
Saving Programs
Loading Programs
Using the Quick Copy menu
FAXING (OPTIONAL)
65
65
65
65
66
67
67
67
67
68
68
68
68
68
69
69
69
69
70
70
70
70
70
71
71
71
71
Preparing to fax
Sending a fax from your computer
Sending a fax (Windows)
Checking the sent fax list (Windows)
Sending a fax (MAC)
Understanding the fax screen
Basic tab
Advanced tab
Image tab
Sending a fax
Setting the fax header
Sending a fax
Sending a fax using speed dial numbers
Sending a fax manually using On Hook
Sending a fax manually using an extension telephone
Resending Automatically
Redialing the last number
Delaying a fax transmission
Receiving a fax
Changing the receive modes
Receiving manually in Telephone mode
Receiving faxes manually using an extension telephone
Receiving in secure receiving mode
Selecting a received fax output tray
Printing received faxes on both sides of the paper
Printing received faxes to the right tray (face up)
Receiving faxes in memory
50
65
Contents_ 4
contents
SCANNING
76
71
71
71
72
72
73
73
73
74
74
74
74
74
74
75
Adjusting the document settings
Selecting the size of originals
Faxing on both sides of originals
Selecting the orientation of originals
Changing the resolution
Selecting the type of originals
Changing the darkness
Printing a fax report
Using a programs setting
Saving Programs
Using Programs
Managing Programs
Saving and loading documents
Saving
Loading
76
76
77
77
78
78
78
78
79
79
80
Basic scanning method
Understanding the scan methods
Scanning originals and sending through email (scan to email)
Understanding the Scan to Email screen
Resending to the last email address
Printing an email confirmation report
Scanning originals and sending via SMB/FTP (Scan to server)
Understanding the Scan to Server screen
Scanning and sending to an SMB/FTP server
Resending to the last server address
Scanning originals and sending to a USB memory device (scan to
USB)
Understanding the Scan to USB screen
Scanning to a USB memory device
Changing the scan feature settings
Changing the resolution
Changing Darkness
Scanning from both sides of originals
Selecting the orientation of originals
Selecting the size of originals
Selecting the type of originals
Selecting the color mode
Adjusting background
Erasing backside Images
Quality
File Policy
File Format
Setting job completion notification
Using a programs setting
Saving
Loading
Scanning originals and sending to your computer (scan to PC)
For a network connected machine
Scanning with TWAIN-enabled software
MAC scanning
Scanning with network
Linux scanning
Scanning
Adding Job Type Settings
Using the Image Manager
80
81
81
81
81
82
82
83
83
83
83
84
84
84
84
85
85
85
86
86
86
86
86
86
87
87
87
88
Contents_ 5
contents
USING SMARTHRU WORKFLOW, SHARED FOLDER, AND
STORED DOCUMENT
89
89
90
90
91
91
91
91
92
92
93
About SmarThru Workflow
Understanding the SmarThru Workflow screen
Workflow Screen
Workform Creation Screen
Workform execution
Understanding the Shared Folder screen
Creating a shared folder
Using the shared folder
Registering users
Understanding the Stored Document screen
Saving documents in the Stored Document
SETTING UP AN ADDRESS BOOK
94
94
94
95
95
95
95
95
96
96
96
Setting up an address book using the control panel
Storing Individual address (Fax, E-Mail)
Storing Individual addresses (SMB, FTP)
Editing Individual address
Storing Group address
Editing Group address
Searching the Address Book for an entry
Deleting an entry in an Address Book
Checking Address Book for an entry
Setting up an address book using SyncThru™ Web Service
Storing on your local machine
89
94
PRINTING
100
100
101
101
101
101
102
102
103
103
104
105
105
105
105
106
106
106
106
107
107
107
107
108
108
109
109
109
110
110
110
110
Printer driver features
Basic printing
Canceling a print job
Opening printing preferences
Favorites tab
Basic tab
Paper tab
Graphics tab
Finishing tab
Advanced tab
Eco tab
Samsung tab
Print Mode
Using a favorite setting
Using help
Setting Device Options
Using special print features
Printing multiple pages on one sheet of paper
Printing posters
Printing on both sides of the paper
Change the size of your document
Fitting your document to a selected paper size
Using watermarks
Using overlay
Using direct printing utility
What is Direct Printing Utility?
Printing
Using the right-click menu
Changing the default print settings
Setting your machine as a default machine
Printing to a file (PRN)
Contents_ 6
contents
110 MAC printing
110
Printing a document
111
Activating optional devices or accessories
111
Changing printer settings
113
Printing multiple pages on one sheet of paper
113
Printing on both sides of paper
113 Linux printing
113
Printing from applications
114
Printing files
114
Configuring Printer Properties
114 UNIX Printing
114
Proceeding the print job
114
Changing the machine settings
USING A USB MEMORY DEVICE
116
116
117
118
118
118
Understanding the USB screen
About USB memory device
Printing from a USB memory device
Managing USB memory
Formatting a USB memory device
Deleting an image file
MANAGEMENT TOOLS
119
119
119
119
119
120
120
120
121
121
122
123
123
123
123
124
124
Easy Capture Manager
Samsung AnyWeb Print
Easy Eco Driver
Using Samsung Easy Printer Manager
Understanding Samsung Easy Printer Manager
Advanced settings user interface overview
Using Samsung Printer Status
Samsung Printer Status overview
Using Samsung Easy Document Creator
Understanding Samsung Easy Document Creator
Using features
Plug-ins
Using the Linux Unified Driver Configurator
Opening the Unified Driver Configurator
Printers configuration
Scanners configuration
Ports configuration
116
119
TROUBLESHOOTING 125 Redistributing toner
125
126
128
129
132
133
133
134
136
137
137
138
139
139
140
140
Replacing the toner cartridge
Cleaning paper dust stick and chargers of imaging units
Replacing the imaging unit
Replacing the waste toner container
Clearing original document jams
Original paper jam in front of scanner
Original paper jam inside of scanner
Tips for avoiding paper jams
Clearing paper jams
Paper jam in tray 1, 2
Paper jam in tray 3, 4
Paper jam in the multi-purpose tray
Paper jam inside the machine (Jam feed 1, Jam feed 2)
Paper jam inside the machine (Jam feed 3, Jam feed 4)
Paper jam inside the machine (Jam Registration)
Contents_ 7
contents
141
Paper jam inside of the machine (Jam at Fuser out)
141
Paper jam at the top of duplex path (Jam Duplex Return, Jam Duplex 1)
142
Paper jam at the inside of duplex path (Jam Duplex 2)
142
Paper jam bottom of duplex path (Jam Duplex Regi.)
143
Paper jam in exit area (Jam Exit Face down)
143
Paper jam at finisher’s exit
144
Paper jam inside of finisher
145 Understanding display messages
150 Solving other problems
150
Power and cable connecting problems
150
Display screen problem
151
Paper feeding problems
151
Printing problems
153
Printing quality problems
155
Copying problems
156
Scanning problems
156
Fax problems (optional)
157
Common PostScript problems
157
Common Windows problems
158
Common Linux problems
159
Common MAC problems
SUPPLIES AND ACCESSORIES
160
160
160
160
160
161
161
162
163
How to purchase
Available supplies
SCX-812x Series
CLX-92x1_9301 Series
Necessary precautions to take when installing accessories
Available accessories
Checking replaceable’s lifespan
Specifications
CONTACT SAMSUNG WORLDWIDE
169
GLOSSARY
171
Contents_ 8
Safety information
These warnings and precautions are included in order to prevent injury to you and others, as well as preventing any
potential damage to your machine. Be sure to read and understand all of these instructions before using the machine.
Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and
instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place
for future reference.
Important safety symbols
This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of
danger.
Explanation of all icons and signs used in the user’s guide:
Warning
Hazards or unsafe practices that may result in severe personal injury or death.
Caution
Hazards or unsafe practices that may result in minor personal injury or property damage.
Do not attempt.
Do not disassemble.
Do not touch.
Unplug the power cord from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Follow directions explicitly.
Safety information_ 9
Operating environment
Warning
Do not use if the power cord is damaged or if the electrical outlet is not grounded.
►This could result in electric shock or fire.
Do not place anything on top of the machine (water, small metal or heavy objects, candles, lit cigarettes, etc.).
►This could result in electric shock or fire.
•
If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off
the power switch and unplug the machine.
• The user should be able to access the power outlet in case of emergencies that might require the user to pull the plug out.
►This could result in electric shock or fire.
Do not bend, or place heavy objects on the power cord.
►Stepping on or allowing the power cord to be crushed by a heavy object could result in electric shock or fire.
Do not remove the plug by pulling on the cord; do not handle the plug with wet hands.
►This could result in electric shock or fire.
Caution
During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet.
►This could result in electric shock or fire.
Be careful, the paper output area is hot.
►Burns could occur.
If the machine has been dropped, or if the cabinet appears damaged, unplug the machine from all interface
connections and request assistance from qualified service personnel.
►Otherwise, this could result in electric shock or fire.
If the machine does not operate properly after these instructions have been followed, unplug the machine from all
interface connections and request assistance from qualified service personnel.
►Otherwise, this could result in electric shock or fire.
If the plug does not easily enter the electrical outlet, do not attempt to force it in.
►Call an electrician to change the electrical outlet, or this could result in electric shock.
Do not allow pets to chew on the AC power, telephone or PC interface cords.
►This could result in electric shock or fire and/or injury to your pet.
Safety information_ 10
Operating method
Caution
Do not forcefully pull the paper out during printing.
►It can cause damage to the machine.
Be careful not to put your hand between the machine and paper tray.
►You may get injured.
Be care when replacing paper or removing jammed paper.
►New paper has sharp edges and can cause painful cuts.
When printing large quantities, the bottom part of the paper output area may get hot. Do not allow children to touch.
►Burns can occur.
When removing jammed paper, do not use tweezers or sharp metal objects.
►It can damage the machine.
Do not allow too many papers to stack up in the paper output tray.
►It can damage the machine.
Do not block or push objects into the ventilation opening.
►This could result in elevated component temperatures which can cause damage or fire.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
This machine's power reception device is the power cord.
►To switch off the power supply, remove the power cord from the electrical outlet.
Installation / Moving
Warning
Do not place the machine in an area with dust, humidity, or water leaks.
►This could result in electric shock or fire.
Safety information_ 11
Caution
Before moving the machine, turn the power off and disconnect all cords. The information below are only suggestions based
on the units weight.
If you have a medical condition that prevents you from lifting, do not lift the machine. Ask for help, and always use the
appropriate amount of people to lift the device safety.
Then lift the machine:
•
If the machine weighs under 20 kg (44.09 lbs), lift with 1 person.
•
If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift with 2 people.
•
If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or more people.
►The machine could fall, causing injury or machine damage.
Do not place the machine on an unstable surface.
►The machine could fall, causing injury or machine damage.
Use only No.26 AWGa or larger, telephone line cord, if necessary.
►Otherwise, it can cause damage to the machine.
Make sure you plug the power cord into a grounded electrical outlet.
►Otherwise, this could result in electric shock or fire.
Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (6
feet) with a 110V machine, then the gauge should be 16 AWG or larger.
►Otherwise, it can cause damage to the machine, and could result in electric shock or fire.
Do not put a cover over the machine or place it in an airtight location, such as a closet.
►If the machine is not well-ventilated, this could result in fire.
Do not overload wall outlets and extension cords.
►This can diminish performance, and could result in electric shock or fire.
The machine should be connected to the power level which is specified on the label.
►If you are unsure and want to check the power level you are using, contact the electrical utility company.
a. AWG: American Wire Gauge
Maintenance / Checking
Caution
Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean the machine with benzene,
paint thinner or alcohol; do not spray water directly into the machine.
►This could result in electric shock or fire.
When you are working inside the machine replacing supplies or cleaning the inside, do not operate the machine.
►You could get injured.
Safety information_ 12
Keep cleaning supplies away from children.
►Children could get hurt.
Do not disassemble, repair or rebuild the machine by yourself.
►It can damage the machine. Call a certified technician when the machine needs repairing.
To clean and operate the machine, strictly follow the user's guide provided with the machine.
►Otherwise, you could damage the machine.
Keep the power cable and the contact surface of the plug clean from dust or water.
►Otherwise, this could result in electric shock or fire.
•
•
•
Do not remove any covers or guards that are fastened with screws.
Fuser units should only be repaired by a certified service technician. Repair by non-certified technicians could result in
fire or electric shock.
The machine should only be repaired by a Samsung service technician.
Supply usage
Caution
Do not disassemble the toner cartridge.
►Toner dust can be dangerous if inhaled or ingested.
Do not burn any of the supplies such as toner cartridge or fuser unit.
►This could cause an explosion or uncontrollable fire.
When storing supplies such as toner cartridges, keep them away from children.
►Toner dust can be dangerous if inhaled or ingested.
Using recycled supplies, such as toner, can cause damage to the machine.
►In case of damage due to the use of recycled supplies, a service fee will be charged.
When toner gets on your clothing, do not use hot water to wash it.
►Hot water sets toner into fabric. Use cold water.
When changing the toner cartridge or removing jammed paper, be careful not to let toner dust touch your body or clothes.
►Toner dust can be dangerous if inhaled or ingested.
Safety information_ 13
Regulatory information
This machine is designed for our sound environment and certified with several regulatory statements.
Laser Safety Statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and
elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1 : 2007.
Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to
laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.
WARNING
Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible,
can damage your eyes.
When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:
Ozone Safety
During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, request your nearest Samsung dealer.
Regulatory information_ 14
PERCHLORATE WARNING
This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in
California USA.
Perchlorate Material - special handling may apply.
see www.dtsc.ca.gov/hazardouswaste/perchlorate. (U.S.A. only)
Power Saver
This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR program see http://www.energystar.gov
Recycling
Recycle or dispose of the packaging material for this product in an environmentally responsible manner.
China only
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
(The United States of America only)
Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278 - 0799
Regulatory information_ 15
Radio Frequency Emissions
FCC Information to the User
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or experienced radio TV technician for help.
Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe A prescrites dans la
norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.
UNITED STATES OF AMERICA
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be
present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the
presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system
label.
The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the body, for use of a wireless device near the
body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on.
The power output of the wireless device (or devices), which may be embedded in your printer, is well below the RF exposure limits as set by
the FCC.
This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation of the device.
Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to
use it. Contact manufacturer for service.
RFID (RADIO FREQUENCY INTERFACE DEVICE)
RFID operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device. (U.S.A., France, Taiwan only)
Regulatory information_ 16
Russia only
Germany only
Turkey only
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any
message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or
on the first page of the transmission the following information:
1. the date and time of transmission
2. identification of either business, business entity or individual sending the message; and
3. telephone number of either the sending machine, business, business entity or individual.
The Telephone Company may make changes in its communications facilities, equipment operations or procedures where such action is
reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68. If such changes can
be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require
modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given
adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service
Regulatory information_ 17
Ringer Equivalence Number
The Ringer Equivalence Number and FCC Registration Number for this machine may be found on the label located on the bottom or rear of the
machine. In some instances you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone line, and is useful for determining whether
you have “overloaded” the line. Installing several types of equipment on the same telephone line may result in problems making and receiving
telephone calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the equipment on your telephone
line should be less than five in order to assure proper service from the telephone company. In some cases, a sum of five may not be usable on
your line. If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may
cause harm to the telephone network.
The equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the right lower side of this equipment is
a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s
authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company
should notify the customer that service may be stopped. However, where prior notice is impractical, the company may temporarily cease
service, providing that they:
a) promptly notify the customer.
b) give the customer an opportunity to correct the equipment problem.
c) inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to procedures set out in
FCC Rules and Regulations Subpart E of Part 68.
You should also know that:
•
•
Your machine is not designed to be connected to a digital PBX system.
If you intend to use a computer modem or fax modem on the same phone line as your machine, you may experience transmission and
reception problems with all the equipment. It is recommended that no other equipment, except for a regular telephone, share the line with
your machine.
• If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for both the power
and the telephone lines. Surge protectors can be purchased from your dealer or telephone and electronic specialty stores.
• When programming emergency numbers and/or making test calls to emergency numbers, use a non-emergency number to advise the
emergency service dispatcher of your intentions. The dispatcher will give you further instructions on how to actually test the emergency
number.
• This machine may not be used on coin service or party lines.
• This machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone network by means of a standard modular jack, USOC RJ-11C.
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the
fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until
you have another fuse cover.
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal
13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.
If you cut off the moulded plug, get rid of it straight away.
You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.
Regulatory information_ 18
Important warning:
You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or
green.
You must connect the blue wire to the pin which is marked with the letter “N” or colored black.
You must connect the brown wire to the pin which is marked with the letter “L” or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
Declaration of Conformity (European Countries)
Approvals and Certifications
Hereby, Samsung Electronics, declares that this [CLX-865x Series] is in compliance with the essential requirements and other relevant
provisions of R&TTE Directive 1999/5/EC.
The declaration of conformity may be consulted at www.samsung.com, go to Support > Download center and enter your printer (MFP) name
to browse the EuDoC.
Hereby, Samsung Electronics declare that this product is in compliance with the essential requirements and other relevant provisions of:
CLX-92x1 93x1 Series: R&TTE Directive (1999/5/EC)
The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer (MFP)
name to browse the EuDoC.
January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment.
January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic
compatibility.
March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of
their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics
Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched
telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the European countries:
In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the
European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the
relevant advisory notes contained in this document.
Regulatory information_ 19
China only
Regulatory information_ 20
About this user’s guide
This user’s guide provides information to provide a basic understanding of the machine as well as detailed explanations on
each step during actual usage. Valuable for both novice and professional users, all users can refer to this guide for
installing and using the machine.
•
•
•
•
•
•
•
Read the safety information before using the machine.
If you have a problem using the machine, refer to the troubleshooting chapter (see "Troubleshooting" on page 125).
Terms used in this user’s guide are explained in the glossary chapter (see "Glossary" on page 171).
Use the Index to find information.
All illustrations in this user’s guide may differ from your machine depending on its options or models.
The display screen image in this user’s guide may differ from your machine depending on its options or models.
The procedures in this user’s guide are mainly based on the operating system of Windows 7.
Conventions
Some terms in this guide are used interchangeably:
• Document is synonymous with original.
• Paper is synonymous with media, or print media.
• Machine refers to printer or MFP.
The following table offers the conventions of this guide:
Convention
Description
Example
Bold
Used for texts on the display or button names on the machine.
Note
Provides additional information or detailed specifications of the machine function
and feature.
The date format may differ from country
to country.
Caution
Gives users information to protect the machine from possible mechanical
damage.
Do not touch the green underside of the
toner cartridge.
Footnote
Provides additional information on certain words or a phrase.
a. pages per minute
(“Cross-reference”)
Guides users to a reference page for additional detailed information.
(see "Finding more information" on page 22).
About this user’s guide_ 21
Start
Finding more information
You can find information for setting up and using your machine from the following resources, either as a print-out or on screen.
Material name
Description
Installation Guide
This guide provides information on setting up your machine and requires that you follow the instructions in the guide to prepare the
machine.
Go Guide
This guide provides operating procedures and descriptions of the most frequently used functions, allowing the machine to immediately
be used.
Online User’s Guide
This guide provides you with step-by-step instructions for using your machine’s full features and contains information for maintaining
your machine, troubleshooting, and installing accessories.
Machine Driver Help
This help guide provides you with help information on the printer driver and instructions for setting up the printing options (see the User
Guide).
Samsung website
If you have Internet access, you can get help, support, machine drivers, manuals, and order information from the Samsung website.
(www.samsung.com)
Downloadable
software
You can download useful software from the Samsung website.
•
•
•
SyncThruTM Web Admin Service: convenient for network administrators who need to manage many machines simultaneously. This
software is for network models only. (http://solution.samsungprinter.com)
Samsung AnyWeb Print: helps personal users to screen-capture the website screen in Windows Internet Explorer easily.
(http://solution.samsungprinter.com/personal/anywebprint)
XPS printer driver: used to print XPS file format. The XPS printer driver can be installed only on Windows Vista OS or higher.
(www.samsung.com)
About this user’s guide_ 22
Features of your new product
Your new machine is equipped with a number of special features that improve the quality of your printed documents.
Special Features
Print with excellent quality and speed
Print in various environments
•
•
•
•
•
•
You can print with a resolution of up to 1,200 x 1,200 dpi
(CLX-92x1 9301 Series). You can print with a resolution of
up to 9,600 x 600 dpi effective output (SCX-812x Series).
CLX-9301 Series prints A4-sized or letter-sized paper at up
to 30 ppm. CLX-9251 Series prints A4-sized or letter-sized
paper at up to 25 ppm. CLX-9201 Series prints A4-sized or
letter-sized paper at up to 20 ppm.
CLX-9301 Series prints A3-sized paper at up to 15 ppm.
CLX-9251 Series prints A3-sized paper at up to 12.5 ppm.
CLX-9201 Series prints A3-sized paper at up to 10 ppm.
SCX-8128 Series prints A4-sized or letter-sized paper at up
to 28 ppm. SCX-8123 Series prints A4-sized or letter-sized
paper at up to 23 ppm.
SCX-8128 Series prints A3-sized paper at up to 14 ppm.
SCX-8123 Series prints A3-sized paper at up to 11.5 ppm.
•
You can print on various operating systems such as
Windows, Linux, MAC and Unix systems.
Your machine is equipped with a network interface.
Copy originals in several formats
•
•
•
Your machine can copy multiple image copies from the
original documents on a single page (see "N-up copying" on
page 57).
There are special functions to erase catalog and newspaper
background images (see "Adjusting background" on
page 62).
The print quality and image size can be adjusted and
enhanced at the same time.
Handle many different types of printable material
Scan the originals and send it right away
•
•
•
•
The multi-purpose tray supports various printable materials
(see"Print media specifications" on page 165).
The multi-purpose tray holds up to 100 sheets of plain paper.
The 1,040-sheet standard tray and 1,040-sheet optional dual
cassette feeder support plain paper in various sizes.
•
Scan in color and use precise compressions of JPEG, TIFF,
and PDF formats.
Quickly scan and send files to multiple destinations using
Networks scanning (see "Scanning" on page 76).
Create professional documents
Set a specific time to transmit a fax (optional)
•
•
•
•
Print Posters. The texts and pictures of each page of your
document are magnified and printed across the sheet of
paper and can then be taped together to form a poster (see
"Printing posters" on page 107).
Print Watermarks. You can customize your documents with
words, such as “CONFIDENTAL” (see "Using watermarks"
on page 108).
You can use preprinted forms and letterhead with plain
paper (see"Using overlay" on page 108).
Save time and money
•
•
•
To save paper, you can print multiple pages on one single
sheet of paper (see "Printing multiple pages on one sheet of
paper" on page 106).
This machine automatically conserves electricity by
substantially reducing power consumption when not in use.
To save paper, you can print on both sides of the paper
(double-sided printing) (see "Printing on both sides of the
paper" on page 107).
•
You can specify a certain time to transmit a fax and also
send the fax to several stored addresses.
After transmission, the machine may print out the fax reports
according to the setting.
Use USB flash memory devices
If you have a USB memory device, you can use it various ways
for your machine.
• You can scan documents and save them to the device.
• You can directly print data stored in the device (see
"Printing from a USB memory device" on page 117).
Support XOA applications
The machine supports XOA custom applications.
• Regarding the XOA custom applications, please contact
your XOA custom application provider.
Features of your new product_ 23
Features by model
The machine is designed to support all of your document needs from printing and copying to more advanced networking solutions for your business. Some features
and optional goods may not be available depending on models or countries.
Features by model include:
FEATURES
CLX-9301 Series
CLX-9251 Series
CLX-9201 Series
SCX-8128 Series
SCX-8123 Series
USB Memory Interface
●
●
●
●
●
Duplex Automatic Document Feeder
●
●
●
●
●
Hard Disk
●
●
●
o
Network Interface Ethernet
10/100/1000 Base TX wired LAN
●
●
●
●
●
Duplex (2-sided) printing
●
●
●
●
●
500-sheet Inner Finisher
o
o
o
o
o
Cabinet Stand
o
o
o
o
o
Dual Cassette Feeder
o
o
o
o
o
Working Table
o
o
o
o
o
Fax Kit
o
o
o
o
o
FDI Kit
o
o
o
o
o
Job Separator
o
o
o
o
o
( ●: Included, o: Optional, Blank: Not available)
Features of your new product_ 24
Introduction
1.
These are the main components of your machine:
This chapter includes:
•
•
•
•
•
•
•
•
Machine overview
Control panel overview
Touch interaction
Understanding the status LED
Turning the machine on
Turning the machine off
Connecting a printer cable
Introducing the display screen and useful buttons
Machine overview
Front view 1
2
1
3
4
13
12
11
5
10
6
9
8
7
1
Duplex automatic document feeder cover
8
Dual cassette feeder (tray 3, tray 4)a
2
Duplex automatic document feeder width guides
9
Standard tray (tray 1, tray 2)
3
Duplex automatic document feeder input tray
10
Front door
4
Duplex automatic document feeder output tray
11
Front door handle
5
Power-switch
12
Paper output tray
6
Power receptacle
13
Control panel
Introduction_ 25
7
Optional dual cassette feeder right bottom door
a. Optional device.
Front view 2
2
1
5
3
4
1
Scanner glass
4
Multi-purpose tray paper width guide
2
White sheet
5
USB port
3
Multi-purpose tray
Introduction_ 26
Rear view
1
2
3
4
1
Duplexing automatic document feeder cable
3
USB port
2
Network port
4
USB printer port
Introduction_ 27
Inner view (CLX-92x1 Series, CLX-9301 Series)
3
4
2
1
1
LSU window cleaning stick
3
Toner Cartridges
2
Waste toner container
4
Imaging units
If you want to see the imaging unit, you need to remove the waste toner container.
Introduction_ 28
Inner view (SCX-812x Series)
3
2
1
1
Waste toner container
2
Toner cartridge
3
Imaging unit
If you want to see the imaging unit, you need to remove the waste toner container.
Introduction_ 29
Control panel overview
3
4
5
12
1
6
C
7
9
13
14
10
ID
8
15
11
2
1
Display screen
Shows the current machine status and prompts during an operation. You can set menus easily using the display screen.
2
Status LED
Shows the status of your machine (see "Understanding the status LED" on page 32).
3
Job Status
Shows the jobs currently running, queued jobs, completed jobs, current error code or secured jobs.
4
Counter
Shows the amount of paper used (see "Counter button" on page 35).
5
Eco
Turn on Eco mode (see "Eco button" on page 35).
6
Clear
Deletes characters in the edit area.
7
Numeric keypad
Dials numbers and enters alphanumeric characters. You can also enter the number value for document copies or other
options.
8
Reset
Resets the current machine setup.
9
Redial/Pause
Redials the recently sent fax number or received caller ID in ready mode, or inserts a pause (-) into a fax number in edit
mode.
10
Log in/Log out
Allows user to log in or log out.
11
On Hook Dial
When you press this button, you can hear a dial tone. Then enter a fax number. It is similar to making a call using a speaker
phone.
12
Power
Turns the power on or off. When the blue LED is on, the machine is powered on and you can use it. To turn the machine off,
press and hole this button for at least 3 seconds. Press Yes when the confirmation window appears.
13
Interrupt
Stops a job in operation for urgent copying.
14
Stop
Stops an operation at any time. The pop-up window appears on the screen showing the current job that the user can stop or
resume.
15
Start
Starts a job.
When you use the display screen, use your finger only.
Introduction_ 30
Touch interaction
Type
Description
Tap
(Press)
Touch & Move
Release
Action of quickly pressing and releasing an area of screen
(When used with “release”, it will be called a “press’”).
When touching the screen, the focus will be moved straight slowly.
When releasing, only the focus will be moved.
On the touchable view (not item), touch & move will activate and through the touch & move,
function will be activated -> micro control activates through touch & move on the video player.
Action of removing your finger from the screen (The moment that the function is activated).
(Used with a “press” or “long press”).
Introduction_ 31
Understanding the status LED
The color of the status LED indicates the machine's current status.
Description
Status
Off
•
•
Green
Red
The machine is off-line.
The machine is in power saver mode. When data is received, or any button is pressed, it switches to on-line automatically.
On
The machine is on-line and can be used.
Blinking
Fax
The machine is sending or receiving faxes.
Copy
The machine is copying documents.
Scan
The machine is scanning documents.
Print
•
•
On
•
The imaging unit is at the end of its lifespan. Remove the old imaging unit and install a new one.
•
•
•
•
•
The toner cartridge lifea is totally empty. Remove the old toner cartridge and install a new one.
A paper jam has occurred (see "Clearing paper jams" on page 137).
The door is open. Close the door.
There is no paper in the tray. Load paper in the tray (see "Loading paper in the tray" on page 39).
The machine has stopped due to a major error. Check the display message (see "Understanding display messages" on
page 145).
The waste toner container is not installed in the machine, or the waste toner container is full (see "Replacing the waste toner
container" on page 132).
•
Blinking
When the status LED slowly blinks, the machine is receiving data from the computer.
When the status LED blinks rapidly, the machine is printing data.
•
A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message
(see "Understanding display messages" on page 145). When the problem is cleared, the machine resumes its original task.
•
The toner cartridge lifea, imaging unit, or waste toner container is near the end of its life. Order a new toner cartridge, imaging
unit, or waste toner container. You can temporarily improve print quality by redistributing the toner.
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to
ISO/IEC 19798. The number of pages may be affected by operating environment, printing interval, media type, and media size. Some amount of toner may
remain in the cartridge even when the red LED is on and the printer stops printing.
Check the message on the display screen. Follow the instructions in the message or refer to the troubleshooting chapter (see "Understanding display
messages" on page 145). If the problem persists, call for service.
Introduction_ 32
Turning the machine on
3. Turn on the main power switch.
Keep in mind that you should use the power cord supplied with the
machine. Otherwise, it can cause fire or damage to the machine.
1. Plug the power cord into the power receptacle.
•
•
2. Plug the other end into a properly grounded AC outlet.
Introduction_ 33
Some parts inside of the machine may be hot when power is on, or
after printing. Be careful not to burn yourself when working inside
the machine.
Do not disassemble the machine when it is turned on or plugged
in. Doing so may give you an electric shock.
Turning the machine off
Connecting a printer cable
If you need to turn the machine off, press the Power button for more than
three seconds on the right side of the control panel. When the confirmation
window appears, press Yes from the display screen, then wait until power is
turned off automatically.
Using a network cable
•
•
This machine has a bulit-in network interface card. You can connect your
machine to a network using a network cable.
Connect your machine to the network with a network cable:
The machine has three types of power off mode. Press the
Machine Setup > General Settings > Power Button Operation.
The Power Button Operation option can only be configured by an
authorized user who has registered an ID and a password on the
machine. For detailed information about the power off mode using
the Power button, refer to the Administrator’s Guide.
You can also turn the machine on by pressing the Power button.
If you turn the machine off directly using the main power switch above
the power receptacle, it could cause a hard disk problem in the
machine.
Introduction_ 34
Introducing the display screen and useful
buttons
•
Display screen
•
The display screen on the control panel allows user-friendly operation of the
machine. Once you press the home icon (
) on the screen, it shows the
display screen. The display screen image in this user’s guide may differ
from your machine depending on its options or models.
•
•
•
•
Icons shown on the display screen such as Fax may be grayed
out, depending on the optional kit or program installed in your
machine.
To switch to the next display screen, press the right arrow or drag
your finger across the display screen .
Depending on the authentication setting, the machine’s users have
to enter an ID and a password. In this case, the machine can only
be used by an authorized user who has registered an ID and a
password on the machine. Contact the machine’s administrator.
•
menu" on page 64).
ID Copy: Enters the ID Copy menu (see "Using the Quick Copy menu"
on page 64).
USB: Enters the USB menu. When a USB memory device is inserted
into the USB memory port on your machine, USB is activated on the
display screen (see "Using a USB memory device" on page 116).
Scan to USB: Enters the Scan to USB menu. When a USB memory
device is inserted into the USB memory port on your machine, Scan to
USB is activated on the display screen (see "Scanning originals and
sending to a USB memory device (scan to USB)" on page 80).
Machine Setup: You can browse current machine settings or change
machine values.
Some menus are only configured by an administrator or an
authorized user who has an ID and password registered on the
machine by an administrator. When the machine requests, enter
the ID and password.
•
SmarThru WorkFlow: Enters the SmarThru Workflow menu (see
"using Smarthru Workflow, shared Folder, and stored document" on
page 89).
Counter button
When you press the Counter button on the control panel, You can see the
number of impressions.
•
•
•
•
•
•
•
•
Copy: Enters the Copy menu (see "Copying" on page 50).
Fax: Enters the Fax menu. Fax is activated on the display screen by
installing an optional fax kit (see "Faxing (optional)" on page 65).
Stored Document: Enters the Stored Document menu (see
"Understanding the Stored Document screen" on page 92).
Shared Folder: Enters the Shared Folder menu (see "Understanding
the Shared Folder screen" on page 91).
Scan to Email: Enters the Scan to Email menu (see "Scanning
originals and sending through email (scan to email)" on page 77).
Scan to Server: Enters the Scan to Server menu (see "Scanning
originals and sending via SMB/FTP (Scan to server)" on page 78).
Scan to PC: Enters the Scan to PC menu (see "Scanning originals and
sending to your computer (scan to PC)" on page 86).
Scan to Shared Folder: Enters the Scan to Shared Folder menu.
When you select Device, you can see the number of impressions by device.
An impression typically refers to a single side of a sheet and not a one-sided
print.
• Total Usage: Displays the total number of impressions.
• Large Page: Displays the total number of impressions with large size
paper.
• Send Usage: Displays the number of images sent via email, server,
etc.
• Fax Send Usage(PSTN): Displays the number of sent faxes.
When you select User, you can see the number of usage, limit, and
remaining usage by each user. For detailed information about Counter,
refer to the Administrator’s Guide.
Eco button
The eco feature allows you to save print resources and leads you to
eco-friendly printing. When you press the Eco button, the machine turns eco
mode on or off. If the eco mode is on, you can see the eco image (
) on
some features. Some options in the features are not available to use in the
eco mode. For detailed information about the eco feature, refer to the
Administrator’s Guide.
•
•
Quick Copy: Enters the Quick Copy menu (see "Using the Quick Copy
Introduction_ 35
Only administrators have permission for Eco Setting in Machine
Setup.
•
Meaning of status
If the machine requests a password for eco mode, you need to
enter the password. Contact your administrator.
The Eco button is activated only for Copy, Quick Copy and
Stored Document menus.
•
Status
Off
•
•
Description
•
•
•
The machine is not in Eco mode.
Green
On
The machine is in Eco mode.
•
•
Job Status button
When you press the Job Status button, the screen lists the currently
running, queued, and completed jobs.
•
•
•
•
•
•
•
•
Current Job
Displays the list of jobs in progress and pending.
Pressing the job name shows more detailed information.
• No: Gives the order of jobs.
• Job Type: Displays type of the job, such as print, copy, fax, etc.
• Job Name: Displays the name of the job.
• User: Displays the name of the job owner.
• Status: Displays the current status of each job (see "Meaning of
status" on page 36).
• Promote: Promotes a selected job from the list when many jobs are
queued. The selected job cannot be promoted in front of a job in
progress.
You cannot use the Promote button depending on the state of
the job.
•
Job Hold: Holds a selected job from the list.
You cannot use the Job Hold button depending on the state of
the job.
•
Delete: Removes a selected job from the list.
Completed Job
Displays the list of completed jobs.
Pressing the job name shows more detailed information.
• No: Gives the order of jobs.
• Job Type: Displays type of the job, such as print, copy, fax, etc.
• Job Name: Displays the name of the job.
• User: Displays the name of the job owner.
• Status: Displays the status of each completed job (see "Meaning of
status" on page 36).
•
•
•
•
•
•
•
Receiving: The machine is receiving data from the network or fax
line.
Image Processing: The machine is processing the image
(decoding, encoding, converting data format).
Formatting: The machine is generating the image for printing.
Pending: The job in the job queue is waiting for its turn.
Transferring: The machine is transferring the data to email, server,
or fax.
Scanning: The machine is scanning.
Dialing: In the fax mode, the machine is dialing to the receiver’s fax
machine.
Connecting: In the fax mode, the machine is waiting to connect to
destination.
Printing: The machine is printing.
Storing: The data is storing to a box or a USB.
Delayed Job: The job is temporarily stopped until the time you set
for Delay Send (email, fax, server).
Held: In the Secured Job tab, the job is temporarily stopped when
secure print job is sent from a computer. You can release the job by
pressing Print.
Held: Proof Print: The job is temporarily stopped when a proof print
job is sent from a computer. You can release the job by pressing
Release.
Held: Proof Copy: In copy mode, the job is temporarily stopped
when the proof copy was selected. You can release the job by
pressing Release.
Held: User Request: The job is temporarily stopped when Job
Hold is pressed. You can release the job by pressing Release.
Held: Delayed Print: The job is temporarily stopped until the time
you set.
Held: Needs Resources: The job is temporarily stopped when the
machine has a problem such as paper empty, paper mismatch, etc.
Interrupted: The job is temporarily stopped when the Interrupt
button is pressed for an urgent copy job.
Paused: The job is paused when the Stop button is pressed.
Completed: The job is completed.
Completed with error: The job is completed with error.
Deleted: If you select a job in the list and press Delete, the job is
deleted.
Secured Job
Displays the list of secured jobs the user has set in the printer driver (see
"Confidential" on page 105). You need to enter the User ID and
Password set in the printer driver (see "Confidential" on page 105).
• No: Gives the order of jobs.
• Job Type: Displays type of the job.
• Job Name: Displays the name of the job.
• User: Displays the name of the job owner.
• Detail: Displays detailed information of the selected job. You can
also change the number of copies by pressing Change Settings.
• Edit: Changes the Job Name of the selected job.
• Delete: Removes the selected job from the list.
• Print: Prints the selected job from the list.
• Close: Closes the job status window.
Introduction_ 36
Active Notice
Displays any error messages and codes that have occurred.
• No: Gives the order of messages.
• Machine Status Message: Displays the error messages for the
current errors in the machine.
• Error Code: Displays the error message's code.
• Detail: Displays detailed information of the selected job.
• Close: Closes the job status window.
Interrupt button
When you press Interrupt (
), the machine goes into interrupt mode,
which means it stops the current printing job for an urgent copy job. When
the urgent copy job is completed, the previous printing job continues.
When you select the staple feature for a printing job, interrupt mode
works after stapling is completed in the printing job.
Status
Off
Green
Description
The machine is not in interrupt printing
mode.
On
The machine is in interrupt printing mode.
Introduction_ 37
Media and tray
2.
This chapter provides information on how to load originals and print media into your machine.
This chapter includes:
•
•
•
•
•
Loading originals
Selecting print media
Loading paper in the tray
Loading originals
Printing on special media
Tray setting
2. Place the original face down on the scanner glass and align it with
the registration guide at the top left corner of the glass.
You can use the scanner glass or the duplex automatic document feeder
(DADF) to load an original for copying, scanning, and sending a fax.
On the scanner glass
Make sure that no originals are in the DADF. If an original is detected in the
DADF, the machine gives it priority over the original on the scanner glass.
To get the best scan quality, especially for colored or gray-scaled images,
use the scanner glass.
Preparing originals
•
Do not load paper smaller than 25 x 25 mm (1.0 x 1.0 inch) or larger
than 297 x 432 mm (11.7 x 17 inches).
• Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading.
1. Open the DADF.
3. Close the DADF.
•
•
•
•
•
•
Leaving the DADF open while copying may affect copy
quality and toner consumption.
Dust on the scanner glass may cause black spots on the
printout. Always keep it clean.
If you are copying a page from a book or magazine, lift the
DADF until its hinges are caught by the stopper and then
close the lid. If the book or magazine is thicker than 30 mm
(1 inch), start copying with the lid open.
Be careful not to break the scanner glass. You may get
hurt.
Do not put hands on the scanner glass while closing the
DADF. The DADF may fall on your hands and cause injury.
Do not look at the light inside of the scanner while copying
or scanning. It is harmful to eyes.
In the duplex automatic document feeder (DADF)
Preparing originals
•
•
Media and tray_ 38
Do not load paper smaller than 140 x 140 mm (5.5 x 5.5 inches) or
larger than 297 x 432 mm (11.7 x 17 inches).
The DADF can automatically detect A3, A4 LEF, A4 SEF, B4, B5
LEF, B5 SEF, A5 LEF, A5 SEF, Ledger, Legal, Letter LEF, Letter
SEF, Statement LEF, and Statement SEF-sized originals.
•
•
•
•
•
Do not attempt to load the following types of paper, in order to
prevent paper jams, low print quality, and machine damage.
- Carbon paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
Remove all staples and paper clips before loading.
Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading.
Do not load originals that include different sizes or weights of paper.
Do not load booklets, pamphlets, transparencies, or documents with
other unusual characteristics.
Using the DADF, you can load up to 100 sheets of paper (80 g/m2, 20 lb
bond) for one job.
1. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
Selecting print media
You can print on a variety of print media, such as plain paper, envelopes,
labels, and transparencies. Always use print media that meet the guidelines
for use with your machine.
Guidelines to select print media
Print media that does not meet the guidelines outlined in this user’s guide
may cause the following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
Properties, such as weight, composition, grain, and moisture content, are
important factors that affect the machine’s performance and the output
quality. When you choose print materials, consider the following:
• The type, size, and weight of the print media for your machine are
described in print media specifications (see "Print media specifications"
on page 165).
• Desired outcome: The print media you choose should be appropriate for
your project.
• Brightness: Some print media are whiter than others and produce
sharper, more vibrant images.
• Surface smoothness: The smoothness of the print media affects how
crisp the printing looks on the paper.
•
2. Load the originals face up into the DADF. Make sure that the bottom
of the original stack matches the paper size marked on the document
input tray.
•
•
•
•
•
3. Adjust the document width guides to the paper size.
Some print media may meet all of the guidelines in this user’s
guide and still not produce satisfactory results. This may be the
result of the sheets characteristics, improper handling,
unacceptable temperature and humidity levels, or other variables
over which cannot be controlled.
Before purchasing large quantities of print media, ensure that it
meets the requirements specified in this user’s guide.
Using print media that does not meet these specifications may
cause problems or require repairs. Such repairs are not covered
by Samsung’s warranty or service agreements.
The amount of paper put into the tray may differ according to
media type used (see "Print media specifications" on page 165).
Make sure not to use the inkjet photo paper with this machine. It
could cause damage to the machine.
Using inflammable print media can cause a fire.
Use designated print media (see "Print media specifications" on
page 165).
The use of inflammable media or foreign materials left in the printer
may lead to overheating of the unit and, in rare cases may cause a
fire.
The amount of paper put into the tray may differ according to media type
used (see "Print media specifications" on page 165).
Loading paper in the tray
Standard tray / optional dual cassette feeder
Dust on the DADF glass may cause black lines on the printout.
Always keep the glass clean.
Load the print media you use for the majority of your print jobs into the
standard tray. The standard tray can hold a maximum of 1,040 sheets of
plain paper.
You can purchase an optional dual cassette feeder and attach it below the
standard tray to load an additional 1,040 sheets of plain paper.
•
•
Media and tray_ 39
Standard tray contains two trays. (Tray 1, Tray 2)
Optional dual cassette feeder contains two trays. (Tray 3, Tray 4)
•
The process to load paper in tray 1, tray 2, tray 3, and tray 4 is the
same.
Using photographic paper or coated paper may cause problems, that
require repairs. Such repairs are not covered by the warranty or
service agreements.
1. Squeeze the lock lever on the handle and pull out the tray.
1
1 Paper width guide
4. Flex and fan the edge of the paper stack to separate the pages before
loading papers.
2. Squeeze the paper length guide, and pull it to the end of the tray.
5. Load paper with the print side facing up.
1
1 Paper length guide
3. Squeeze the paper width guide, and pull it to the end of the tray.
Media and tray_ 40
6. Adjust the paper length guide to the desired paper length.
MAX
1
7. After loading paper into the tray, pinch the paper width guide and move it
toward the stack of paper until it lightly touches the side of the stack. Do
not press the guide too tightly to the edge of the paper: the guide may
bend the paper.
•
•
1 Paper capacity guide
8. Fix the the paper length guide using the locking switch. Release the
locking switch to load a different sized paper.
Do not push the paper guide too far causing the media to warp.
If you do not adjust the paper width guide, it may cause paper
jams.
1
1 Locking switch
Do not overload the tray: it may cause paper jams. Make sure that
the paper is below the maximum paper capacity guide inside the
tray.
9. Insert the tray back into the machine.
When you print a document, set the paper type and size for the tray.
For information about setting the paper type and size on the control
panel (see "Tray setting" on page 47).
The standard tray and optional dual cassette feeder can automatically
detect various-sized paper (see "Media sizes automatically detected" on
page 44).
If you set the Tray Confirmation Message ON in Tray Settings, the
confirmation window appears automatically (see "Setting the tray
confirmation message" on page 47).
Check if the paper size and type in the tray are detected or not. If you
Media and tray_ 41
want to set the paper size and type or if the machine cannot detect them,
you can set the size and type directly in the confirmation window.
•
•
1. Open the multi-purpose tray and pull out the extention if necessary.
If you experience problems with paper feeding, check whether
the paper meets the media specifications (see "Print media
specifications" on page 165). Then, try placing one sheet at a
time in the multi-purpose tray (see "Multi-purpose tray" on
page 42).
The settings made from the machine driver override the
settings on the control panel.
To print from an application:
a) Open an application and start the print menu.
b) Open Printing Preferences (see "Opening printing
preferences" on page 101).
c) Press the Paper tab in Printing Preferences, and select
an appropriate paper type, size, and source.
d) Press OK.
e) Start printing from an application.
Multi-purpose tray
The multi-purpose tray can hold special sizes and types of print material,
such as postcards, note cards, and envelopes. It is useful for single page
printing on colored paper.
Tips on using the multi-purpose tray
•
•
•
•
•
Load only one type, size, and weight of print media at a time in the
multi-purpose tray.
To prevent paper jams, do not add paper while printing when there is
still paper in the multi-purpose tray. This also applies to other types
of print media.
Print media should be loaded face down with the top edge going into
the multi-purpose tray first and be placed in the center of the tray.
Always load only the specified print media to avoid paper jams and
print quality problems (see "Print media specifications" on page 165).
Flatten any curl on postcards, envelopes, and labels before loading
them into the multi-purpose tray.
2. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
Media and tray_ 42
3. Load the paper with the side to be printed on facing down.
The settings made from the machine driver override the
settings on the control panel.
To print from an application:
a) Open an application, and start the print menu.
b) Open Printing Preferences (see "Opening printing
preferences" on page 101).
c) Press the Paper tab in Printing Preferences, and select
an appropriate paper type, size, and source.
d) Press OK.
e) Start printing from an application.
4. Squeeze the multi-purpose tray paper width guides and adjust them
to the width of the paper. Do not force too much, otherwise the paper
will bend resulting in a paper jam or skew.
5. When you print a document, set the paper type and size for the
multi-purpose tray (see "Media sizes automatically detected" on
page 44).
For information about setting the paper type and size on the control
panel (see "Tray setting" on page 47).
Media and tray_ 43
Media sizes automatically detected
Printing on special media
This machine can automatically detect various sized-paper. Refer to the
table below.
The table below shows the available special media for each tray.
Standard tray/
optional dual
cassette feeder
Multi-purpose
tray
Duplex
printing
Letter SEFb
●
o
Available
Letter LEFc
●
o
Available
Ledger
●
o
Available
Legal
●
o
Available
Executive SEF
o
o
Available
o
Available
o
Available
sizea
Executive LEF
Statement SEF
●
Statement LEF
o
When using special media, we recommend you feed one piece of
paper at a time. Check the maximum input number of media for each
tray (see "Print media specifications" on page 165).
Standard tray/
optional dual
cassette feeder
Multi-purpose tray
Thick
●
●
Heavy weight
●
●
Extra Heavy weight 1
●
●
Thin
●
●
Cotton
●
●
Types
Color
●
●
A3
●
o
Available
Preprinted
●
●
A4 SEF
●
o
Available
Recycled
●
●
A4 LEF
●
o
Available
Bond
●
●
A5 SEF
●
o
Available
Archive
●
●
A5 LEF
o
Letterhead
●
●
B4
●
o
Available
Punched
●
●
JIS B5 SEF
●
o
Available
Thin Cardstock
●
●
JIS B5 LEF
o
Available
Thick Cardstock
●
●
A6 SEF
o
A6 LEF
o
ISO B5 SEF
o
ISO B5 LEF
o
Available
o
Folio
o
o
Available
Oficio
o
o
Available
8K
o
o
Available
16K
o
o
Available
Thin Glossy
●
Thick Glossy
●
Envelope
●
Labels
●
(●: Included, Blank: Not available)
a. This machine can detect paper of similar sizes as the listed paper
sizes.
b. SEF meaning is Short Edge Feed.
c. LEF meaning is Long Edge Feed.
(●: Detected, o: Not detected, Blank: You cannot load the paper in the tray.)
Media and tray_ 44
The media types are shown in the Printing Preferences. This paper
type option allows you to set the type of paper to be loaded in the tray.
This setting appears in the list so that you can select it. This will let you
get the best quality printout. If not, the desired print quality may not be
achieved.
Envelope
•
Successful printing on envelopes depends upon the quality of the
envelopes.
To print an envelope, place it with the flap side up.
•
For the best print quality, position margins no closer than 15 mm (0.6
inches) from the edges of the envelope.
Avoid printing over the area where the envelope’s seams meet.
Labels
Load the paper with the side to be printed on facing down.
To avoid damaging the machine, use only labels designed for use in laser
machines.
•
•
•
•
•
•
When selecting envelopes, consider the following factors:
- Weight: The weight of the envelope paper should not exceed
90 g/m2 (16 lb) otherwise, a jam may occur.
- Construction: Prior to printing, envelopes should lie flat with less
than 6 mm (0.25 inches) curl, and should not contain air.
- Condition: Envelopes should not be wrinkled, nicked, or damaged.
- Temperature: Use envelopes that are compatible with the heat and
pressure of the machine during operation.
Use only well-constructed envelopes with sharp and well-creased folds.
Do not use stamped envelopes.
Do not use envelopes with clasps, snaps, windows, coated lining,
self-adhesive seals, or other synthetic materials.
Do not use damaged or poorly made envelopes.
Be sure the seam at both ends of the envelope extends all the way to
the corner of the envelope.
•
•
•
•
1 Acceptable
2 Unacceptable
Envelopes with a peel-off adhesive strip or with more than one flap that
folds over to seal must use adhesives compatible with the machine’s
fusing temperature of about 170°C (338 °F) for 0.1 second. The extra
flaps and strips might cause wrinkling, creasing, or jams, and may even
damage the fuser.
•
When selecting labels, consider the following factors:
- Adhesives: The adhesive material should be stable at your
machine’s fusing temperature of about 170°C (338 °F) for 0.1
second.
- Arrangement: Only use labels with no exposed backing between
them. Labels can peel off sheets that have spaces between the
labels, causing serious jams.
- Curl: Prior to printing, labels must lie flat with no more than 13 mm
(0.5 inches) of curl in any direction.
- Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
Make sure that there is no exposed adhesive material between labels.
Exposed areas can cause labels to peel off during printing, which can
cause paper jams. Exposed adhesive can also cause damage to
machine components.
Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the
machine.
Do not use labels that are separating from the backing sheet or are
wrinkled, bubbled, or damaged.
Media and tray_ 45
•
Do not load paper that does not have space between labels running the
same direction as the paper is being fed. Otherwise, it could cause
paper jams.
Letterhead/Preprinted paper
Single-sided
•
•
•
•
double-sided
Standard tray/
Optional dual
cassette feeder
Face up
Face down
Multi-purpose tray
Face down
Face up
Preprinted paper must be printed with heat-resistant ink that will not
melt, vaporize, or release hazardous emissions when subjected to the
machine’s fusing temperature of about 170°C (338 °F) for 0.1 second.
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
Forms should be sealed in a moisture-proof wrapping to prevent
changes during storage.
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper,
reducing print quality.
Glossy
Load a single sheet of paper into the multi-purpose tray at a time,
glossy side facing down.
Card stock/ Custom-sized paper
•
•
•
•
Recommend media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
Recommend media: Glossy paper (A4) for this machine by HP Superior
Paper 160 glossy (Product: Q6616A) only.
Do not print on media smaller than 98 mm (3.8 inches) wide or 148 mm
(5.8 inches) long.
In the software application, set margins to at least 6.4 mm (0.25 inches)
away from the edges of the material.
Media and tray_ 46
Tray setting
Setting the paper type
After loading paper in the paper tray, set the paper size and type using the
display screen. For computer printing, select the paper size and type in the
application program you use on your computer (see "Opening printing
preferences" on page 101).
1. Press Machine Setup > Tray Settings > Settings > select the tray you
want from the display screen.
The settings made from the machine driver override the settings on
the display screen.
Setting the paper size
1. Press Machine Setup > Tray Settings > Settings > select the tray you
want from the display screen.
2. Press Paper Type and select the paper type.
2. Press Paper Size and select the paper size.
3. Press
to save the selection.
Setting the tray confirmation message
•
If there is no required size paper or you need to use custom size
paper, press the Custom Size Button to set the paper size. You can
also set and save the custom size using Custom Size. You can
select the custom size whenever you need it.
When you load paper into a tray, you can set the confirmation message to
appear automatically; or not at all. This machine can detect some paper
sizes and types automatically. If you want to set the paper size and type, or
the machine cannot detect them, you can set the size and type directly in
the confirmation window.
1. Press Machine Setup > Tray Settings > Settings > select the tray you
want from the display screen.
Media and tray_ 47
1. Press Machine Setup > Tray Settings > Settings > Auto Continue.
2. Press the button in Tray Confirmation Message to activate this
function.
2. Choose one of the options.
Auto tray switch
This is the option to set if the machine is to continue printing or not when
any tray becomes empty. For example, both tray 1 and tray 2 are filled with
the same size paper, the machine automatically prints from tray 2 after the
tray 1 runs out of paper.
1. Press Machine Setup > Tray Settings > Settings > Auto Tray Switch.
Paper substitution
When the requested paper for a print job is not available in the tray, this
feature allows you to substitute similar paper size, For example, if the
requested ledger sized paper is not available in the tray, this machine
substitutes A3 for the requested paper.
When the paper is substituted, some image loss may occur.
1. Press Machine Setup > Tray Settings > Settings > Paper
Substitution.
2. Press the button on the right to activate this function.
Auto continue
This option allows you to continue printing when the paper size you have set
is mismatched with the paper in the tray. When this option is activated, the
machine continues printing using similar or large size paper. If this option is
inactivated, the machine waits until the required size paper is loaded in the
tray.
2. Press the button on the right to activate this function.
Tray protection
When you choose this option, the selected tray will be protected. This will be
used to prevent like paper from being fed if Auto Switching is “ON”.
Media and tray_ 48
1. Press Machine Setup > Tray Settings > Settings > Tray Protection.
2. Choose tray and press the button to activate this function.
Tray priority setting
When you do not select the tray for printing, the tray selected as in the Tray
Priority Setting will be used in order. If the tray does not have the paper on
which you want to print, the machine automatically prints from the trays in
the priority order set.
1. Press Machine Setup > Tray Settings > Settings > Tray Priority
Setting.
2. Press a tray, and give priority in the order for printing job using UP and
Down Arrows.
Media and tray_ 49
Copying
3.
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
•
•
•
Using special copy features
Using a program’s setting
Using the Quick Copy menu
Understanding the copy screen
•
When you press Copy from the display screen, the Copy screen appears
which has several tabs and lots of copying options. All the options are
grouped by features so that you can configure your selections easily.
•
Duplex: Sets the machine to print copies on both sides of the paper
(see "Copying multiple sides" on page 52).
Color Mode: Selects a color mode for making copies (see "Selecting
the color mode (CLX-9201 9301 Series only)" on page 53).
Output: Sets the machine’s various output options (see "Deciding the
form of copy output" on page 53).
Darkness: Adjusts the brightness level to make a copy for easier
reading, when the original contains faint markings and dark images (see
"Changing the darkness" on page 54).
Programs: Allows you to save the current settings for future use (see
"Using a program’s setting" on page 64).
•
•
•
Understanding the copy screen
Basic copy
Changing the settings for each copy
If a different screen is displayed, press (
screen.
•
) to go to the home display
•
•
Advanced tab
Basic tab
•
•
•
•
•
•
•
•
•
Copies: Enters the number of copies.
Paper Source: Selects the paper source tray (see "Selecting the Paper
Source tray" on page 52).
Reduce/Enlarge: Reduces or enlarges the size of a copied image (see
"Reducing or enlarging copies" on page 52).
•
•
Copying_ 50
Original Size: Selects the actual paper size of the originals (see
"Selecting the size of originals" on page 55).
Original Orientation: Selects the orientation of the originals (see
"Selecting the orientation of originals" on page 55).
ID Copy: Prints 2-sided originals on one sheet of paper. This feature is
helpful for copying a small-sized item, such as a business card (see "ID
card copying" on page 56).
N-Up: Prints 2 or more original images, reduced to fit onto one sheet of
paper (see "N-up copying" on page 57).
Booklet: Allows you to create booklets (see "Booklet copying" on
page 60).
Book Copy: Allows you to copy the left or/and right pages of book on
separate output paper (see "Book copying" on page 60).
Watermark: Allows you to print a watermark on printouts (see
"Watermark" on page 61).
Stamp: Allows you to print with some information such as date and time
(see "Stamp" on page 62).
Image tab
•
•
•
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
Original Type: Improves the copy quality by selecting the original’s
type for the current copy job (see "Selecting the type of originals" on
page 62).
Adjust Background: Prints an image with a lighter background.(see
"Adjusting background" on page 62).
Erase Backside Image: Prevents copying the original’s image shown
through on the backside (see "Erasing backside Images" on page 63).
Basic copy
This is the normal and usual procedure for copying your originals.
1. Press Copy from the display screen.
3. Adjust the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Set the copy features in the Advanced or Image tabs, if necessary (see
"Using special copy features" on page 55).
5. Enter the number of copies using the numeric keypad on the control
panel, if necessary.
6. Press
•
•
(Start) from the control panel to begin copying.
To cancel the current copy job, press
(Stop) on the control
panel.
You can delete current and pending jobs using Job Status on the
control panel. Select the job you want to cancel and press Delete
(see "Job Status button" on page 36).
Copying originals of different sizes
This feature allows you to copy originals of different sizes at once.
•
•
Copying_ 51
If you want to copy different sized originals at once, select Mixed
Size under the Original Size option (see "Selecting the size of
originals" on page 55). Otherwise, it could cause originaldocument jams.
We recommend the below combinations to be used for copying
different sized originals. You can use other combinations that are
not recommended, but it could cause original-document jams.
Depending on the default paper size (A4 or Letter), the
combinations are diffent as follows.
If A4 is the default paper size,
- A3 and A4 LEF
- B4 and B5 LEF
- A4 SEF and A5 LEF
- Letter LEF and Ledger
If Letter is the default paper size,
- A3 and A4 LEF
- B4 and B5 LEF
- Ledger and Letter LEF
- Legal, Letter SEF and Statement LEF
1. Press Copy from the display screen.
2. Place the different sized originals face up in the DADF. When you place
them in the DADF, align and gently push them to the rear side of the
DADF width guide.
Changing the settings for each copy
On the Basic tab of the Copy screen, you can select copy features before
starting to copy.
The Basic tab setting is only for the current copy job, which means the
selected settings do not apply to the next copy job. After finishing the
current copy job, the machine automatically restores the default
settings, or when you press the Clear button on the control panel.
Selecting the Paper Source tray
Paper Source sets the tray containing the paper to be used for printing. The
machine prints the scanned image on the paper in the selected tray. You
can see the icons that show paper sizes and the remaining amount of paper
in each tray.
Press the Basic tab > Paper Source, then press the appropriate paper tray.
• Auto: Automatically detects the paper size with the paper tray.
• Other preset values: Check the paper size in each tray and press the
tray containing the paper size you want.
Reducing or enlarging copies
Using the Reduce/Enlarge feature allows you to print an original image
reducing or enlarging it to fit the paper. You can press the icons that show
how to reduce and enlarge copies.
Press the Basic tab > Reduce/Enlarge, then press the appropriate option
to reduce or enlarge an image on the paper.
When you use this option, Booklet in the Advanced tab are inactive.
Original(100%): Prints texts or images the same size as originals.
Auto Fit: Reduces or enlarges the original based on the size of the
output paper.
• Other preset values: Check the image and value on each icon and
press the one you want to use.
You can select an option by pressing a button in the Reduce and Enlarge
list. You can also reduce or enlarge by 1% between 25 ~ 400% to print a
copy using the left/right arrows.
• Custom: You can set and save the custom zoom values (between 25 ~
400%) using Custom. You can select custom values whenever you need
it.
•
•
3. Press the Advanced tab > Original Size > Mixed Size from the display
screen.
The Mixed Size option is activated when the originals are placed
in the DADF.
4. Adjust the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
5. Set the copy features in the Advanced or Image tab, if necessary (see
"Using special copy features" on page 55).
6. Enter the number of copies using the numeric keypad on the control
panel, if necessary.
7. Press
(Start) from the control panel to begin copying.
Copying multiple sides
The duplex feature allows you to copy one-sided or two-sided originals on
both sides of the paper or divide two-sided originals into multiple one-sided
copies. Check the available paper using the Duplex feature. You can only
use this feature with Letter SEF, Letter LEF, Ledger, Legal, Executive SEF,
Statement SEF, A3, A4 SEF, A4 LEF, A5 SEF, B4, JIS B5 SEF, ISO B5
SEF, 8K, 16K, and Oficio.
•
63 to 163 g/m2 (16~43 lb bond) only
Press the Basic tab > Duplex, then press the appropriate duplex option.
If an original is placed on the scanner glass and you press 1 -> 2
Sided, 2 -> 1 Sided or 2 -> 2 Sided, the message Do you want to
scan another page? appears after the first page is copied. Load
another original and press Yes. When you finish, press No on this
window.
•
•
Copying_ 52
1 -> 1 Sided: Scans one side of an original and prints it on one side of
the paper. This function produces exactly the same printout from the
originals.
1 -> 2 Sided: Scans one side of originals and prints them on both sides
•
•
and quality of originals, the printout’s quality could be different from the
sample image’s.
of the paper.
2 -> 1 Sided: Scans both sides of the originals and prints each one on a
separate page.
You can select the original binding type: either Book or Calendar.
2 -> 2 Sided: Scans both sides of the original and prints on both sides
of the paper. This function produces exactly the same printout from the
originals.
You can select the original and output binding type: either Book or
Calendar.
Original
Copy
Selecting the color mode (CLX-9201 9301 Series
only)
The machine provides many powerful effects on images without having
expert editing skills.
Press the Basic tab > Color Mode, then select the color mode you want.
Deciding the form of copy output
•
You can use the copy output options when an optional Inner
Finisher or a booklet finisher is installed.
• Depending on the direction of paper in the tray (e.g., SEF or LEF),
certain directions for stapling may not be available.
Press the Basic tab > Output, then select the copy output options you
want.
If you press the More button, you can see more Color Mode options.
• Auto: Select this setting to automatically detect whether the scanned
document is in color or black and white, and then select an appropriate
color setting.
• Full Color: Select this setting to print the same as the original image
color.
Refer to the sample images below. Depending on the circumstances
and quality of originals, the printout’s quality could be different from the
sample image’s.
Original
•
Copy
•
B/W: Select this setting to print the copy in black and white, regardless
whether the scanned document is in color or in black and white.
Refer to the sample images below. Depending on the circumstances
Copying_ 53
Collated: Printouts in sets to match the sequence of originals.
•
Uncollated: Printouts sorted into stacks of individual pages.
Changing the darkness
Press the Basic tab. You can adjust the degree of darkness using the
left/right arrows. This feature allows dark images to be printed into lighter
images, or light images into darker images.
•
Rotate: Printouts are stacked criss-crossed in sets.
•
•
•
This feature is available only when the standard or booklet
finisher is not installed.
This feature is available only with Letter- and A4-sized print
media.
Before using this feature, you have to load the paper in the
trays with SEF (Short edge feed) and LEF (Long edge feed).
For example, direction of paper feeding in tray 1 is SEF, and
direction of paper feeding in tray 2 is LEF.
Refer to the sample images below. Depending on the circumstances and
quality of originals, the printout’s quality could be different from the sample
image’s.
Light
-
Copying_ 54
Slightly
light
Original
Slightly
dark
Dark
Using special copy features
trays. For example, if the originals total 3 pages, the 1st page is
letter-sized paper, the 2nd page is legal-sized paper, and the 3rd
page is letter-sized paper, then the machine prints the output first
letter, legal, and letter in order from several trays.
On the Advanced or Image tab of the Copy screen, you can select specific
copy features.
Mixed Size is activated when the originals are placed in the
DADF.
Selecting the size of originals
Copies can be produced after specifying the document scanning size if the
document size cannot be detected automatically or if you wish to specify a
certain document size.
Other preset values: You can select the size of originals directly by
pressing the buttons.
6. Press OK from the display screen.
7. Press Start on the control panel to begin copying.
•
Selecting the orientation of originals
When copying double-sided documents or making double-sided copies or
combined copies, specify the document orientation; otherwise, the copies
may not be printed in the correct page order or correct front and back page
arrangement.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
4. Press Advanced tab > Original Size from the display screen.
5. Select the original size.
You can change the paper list on the display screen pressing Inch
Size or mm Size. The paper list is divided into the available A/B
size type and letter size type paper in this machine.
•
Custom: If there is no required paper size or you need to use
custom sized paper, press the cardinal point arrows to set the
original size. You can also set and save the custom size using
Custom Size. You can then select the custom size whenever you
need it.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Press Advanced tab > Original Orientation from the display screen.
4. Select the orientation of the original document.
• Upright Images: Select this setting for an original document loaded
with the top toward the back of the machine.
Using the DADF
The custom size available is different depending on where the
originals are placed.
In the DADF
•
•
Using the scanner
glass
Icon
On the scanner glass
Minimum size
128 x 128 mm
(5 x 5 inches)
25 x 25 mm
(1.0 x 1.0 inches)
Maximum size
297 x 432 mm
(11.7 x 17.0 inches)
297 x 432 mm
(11.7 x 17.0 inches)
Auto: Automatically detects the size of originals, but this option is
supported only when originals are A3, A4 LEF, A4 SEF, B4, B5 LEF,
B5 SEF, A5 LEF, A5 SEF, Ledger, Legal, Letter LEF, Letter SEF,
Statement LEF and Statement SEF-sized.
If you use non-standard-sized paper, image loss could occur. In this
case, you need to select the appropriate paper size before you print.
Mixed Size: Allows the use of both of Letter and Legal-sized papers
together, and the machine uses the proper-sized paper from several
Copying_ 55
•
Sideways Images: Select this setting for an original document
loaded into the DADF with the top of the original document toward
the left side of the machine or an original document placed on the
scanner glass with the top of the original document toward the right
side of the machine.
Using the DADF
Using the scanner
glass
When you place an original on the scanner glass, leave a little
space between the edge of the scanner glass and the original.
Otherwise, part of original may not be printed.
Icon
5. Press Start on the control panel to begin copying.
ID card copying
The machine prints one side of the original on the upper half of the paper
and the other side on the lower half without reducing the size of the original.
This feature is helpful for copying a small-sized item, such as a business
card.
6. Press Start on the control panel. Then the machine starts scanning.
7. Turn the original over and place it on the scanner glass as shown below,
and then close the DADF.
When you place an original on the scanner glass, leave a little
space between the edge of the scanner glass and the original.
Otherwise, part of original may not be printed.
•
1.
2.
3.
4.
5.
This copy feature is available only when you place originals on the
scanner glass.
• The size of the 2-sided originals should be smaller than A5, if not,
some of it won’t be copied.
Press Copy from the display screen.
Press the Advanced tab > ID Copy from the display screen.
Select a tray in Paper Source.
Follow the steps on the display screen.
Place the front side of an original facing down on the scanner glass as
shown below, and close the DADF.
Copying_ 56
8. Press Start on the control panel to begin copying.
•
•
•
If the original is larger than the printable area, some portions may
not be printed.
If you do not press the Start button, only the front side will be
copied.
If you press the Stop button, the machine cancels the copy job
and returns to ready mode.
N-up copying
The machine reduces the size of the original images and prints 2 - 9 pages
onto one sheet of paper.
•
When you use this option Auto Fit, ID Copy, Booklet and Book
Copy in the Advanced tab are inactivated.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Press Advanced tab > N-Up from the display screen.
4. Press an option according to how many images to copy onto one page.
• Off: Copies an original onto one sheet of paper.
• 2Up - 9Up: Copies corresponding numbers of separate originals to
one page.
Depending on original document size, output paper size, and the
reduced rate of image, some options may be inactivated.
5. Select a tray in Paper source.
6. Press the appropriate page order.
• Depending on the options you select, the result will vary. Refer to the
below table before using the 2Up option.
Copying_ 57
Original orientation
(DADF/Scanner glass)
In the DADF
Original orientation
(display screen)
Upright Images
Direction of paper
feeding in the tray
LEFa or SEFb
Available
orientation
Left-to-Right
or
Right-to-Left
Result
Left-to-Right
Right-to-Left
On the scanner glass
In the DADF
Sideways Images
LEF or SEF
On the scanner glass
Copying_ 58
Original orientation
(DADF/Scanner glass)
In the DADF
Original orientation
(display screen)
Sideways Images
Direction of paper
feeding in the tray
LEF or SEF
Available
orientation
Top-to-Down
or
Down-to-Top
Result
Top-to-Down
Down-to-Top
On the scanner glass
In the DADF
Upright Images
LEF or SEF
On the scanner glass
a. LEF meaning is Long Edge Feed.
b. SEF meaning is Short Edge Feed.
•
All other page order options of N-up are the same except for the 2Up. You can press Right-to-Down, Left-to-Down, Down-to-Left, and Down-to-Right.
Copying_ 59
7. Press Start on the control panel to begin copying.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
•
1-Sided Original: Copies from one side of the original to one page
of a booklet.
•
2-Sided Original Book: Copies each side of an original to one page
of a booklet.
•
2-Sided Original Calendar: Copies each side of an original to one
page of a booklet. The second side of each original is rotated 180
degrees so the text will be upright in the booklet.
Booklet copying
The machine automatically prints on one or both sides of the paper, which
are then folded to produce a booklet with all the pages in the correct
sequence.
The machine will also reduce and correctly adjust the position of each
image to fit on the selected paper.
•
•
When you use this option , ID copyOriginal Orientation, N-Up,
Book Copy, and watermark in in the Advanced tab are disabled.
This feature is possible only with Letter, Legal, A4, JIS B5,
Statement, Executive, A5, 8K, 16K, Ledger, A3, and JIS B4 sized
print media.
Book copying
Use this feature to copy a book. If the book is too thick, lift the DADF until its
hinges are engaged by the stopper and then close the DADF. If the book or
magazine is thicker than 30 mm (1.18 inches), start copying with the DADF
open.
•
•
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Duplex and more in the Basic
tab (see "Changing the settings for each copy" on page 52).
4. Press the Advanced tab > Booklet from the display screen.
5. Select a tray in Paper Source.
6. Press the appropriate option.
• Off: Disables this feature.
Copying_ 60
This copy feature is available only when you place originals on the
scanner glass.
When you use this option, Original Orientation, N-Up and
Booklet in the Advanced tab are disabled.
1. Press Copy from the display screen.
2. Place a book page face down on the scanner glass (see "Loading
originals" on page 38).
•
When you place a book on the scanner glass, leave a little
space (about 10 mm) between the top or bottom edge of the
scanner glass and the book.
• Some books may not be available in this feature such as a
hard-cover book, poorly bound book, etc.
3. Adjust the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
4. Press the Advanced tab > Book Copy from the display screen.
5. Press the appropriate option.
• Off: Disables this feature.
• Left Page: Prints only the left page of the book.
•
Book Center & Edge Erase: Erases shadows of a binding or book
edge from the center and side edges of copies.
6. Press Start on the control panel to begin copying.
Watermark
The watermark option allows you to print text over an existing document.
For example, you use it when you want to have large gray letters reading
“DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all
pages of a document.
This feature may not be available depending on models or option kits
installed.
There are several predefined watermarks that come with the machine. You
can also enter a personalized watermark.
When you use this option, Booklet in the Advanced tab is disabled.
•
Right Page: Prints only the right page of the book.
•
Both Pages(From Left): Prints both facing pages from the left
page.
•
Both Pages(From Right): Prints both facing pages from the right
page.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Press the Advanced tab > Watermark from the display screen.
5. Press the appropriate option.
• Off: Disables this feature.
• Other preset values: Allows you to easily select values commonly
used.
• Custom: Allows you to enter a text message using the pop-up
keyboard.
6. Set the Watermark settings.
• Pages: Select to print the option on all pages or only the first page.
• Text Color/Size: Select the text message color and size.
• Position: Select the printed position of the text message.
7. Press Start on the control panel to begin copying.
Copying_ 61
Stamp
Prints the date and time, IP address, device information, and the entered
comment on printouts.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
4. Press the Advanced tab > Stamp from the display screen.
5. Check the button on the right.
6. Press the checkbox on the right.
• IP Address: This option allows you to print a IP Address on the
printouts.
• ID: This option allows you to print a user ID on the printouts.
• Device information: This option allows you to print a device
information on the printouts.
• Comment: This option allows you to print your comment on the
printouts.
• Time & Date: This option allows you to print time and date stamps
on the printouts.
7. Press OK from the display screen.
8. Press Start on the control panel to begin copying.
Selecting the type of originals
The original type setting is used to improve copy quality by selecting
document types for current copy jobs.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Press the Image tab > Original Type from the display screen.
5. Press the appropriate option.
• Text: Use for originals containing mostly text.
• Text/Photo (Text & Printed Photo): Use for originals containing
text mixed with photographs.
• Photo: Use for photographs.
• Copied Original: Use for copied documents.
• Map: Use for maps.
• Light Original: Use for light documents.
6. Press Start on the control panel to begin copying.
Adjusting background
This feature is helpful when copying originals containing color in the
background, such as in newspapers or catalogs.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Press the Image tab > Adjust Background.
5. Press the appropriate option.
• Off: Disables this feature.
• Auto: Optimizes the background.
• Enhance: The higher the number is, the more vivid the background.
• Erase: The higher the number is, the lighter the background.
6. Press Start on the control panel to begin copying.
Copying_ 62
Erasing backside Images
When the original is thin and backside images show through, you can use
this feature to remove the backside images.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Press the Image tab > Erase Backside Image.
5. Press the appropriate option.
• Off: Disables this feature.
• Erase: The higher the number is, the lighter the backside image is.
6. Press Start on the control panel to begin copying.
Copying_ 63
Using a program’s setting
1. Press Quick Copy from the display screen.
This option allows you to save the current settings for future use. You can
also use the previous settings from the last job.
Saving Programs
1. Press Copy from the display screen.
2. Adjust the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
3. Set the copy features in the Advanced or Image tabs, if necessary (see
"Using special copy features" on page 55).
4. Press the Basic tab or Back.
5. Enter the number of copies using the numeric keypad on the control
panel, if necessary.
6. Press Programs.
7. Press Save.
8. Press Program Name input area. The pop-up keyboard appears.
Enter the program name you want. Press Done.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
You can see the values of set Programs by scrolling up or down
and check the values using the up/down arrows.
9. Press Save. When the confirmation window appears, the settings you
set are saved. Press OK to check the list or Cancel.
Loading Programs
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Press Programs > Load.
4. Press a program name you want to use on the list.
5. Press Apply.
The machine is now set to copy according to the setting you selected.
6. Press Start from the control panel to begin copying.
Using the Quick Copy menu
The Quick Copy menu allows you to quickly set copy options without
having to move to a lower level menu or another tab. But, this menu does
not provide all copy options. If you need to use other copy options, use the
copy options in the Copy menu (see "Changing the settings for each copy"
on page 52 or "Using special copy features" on page 55).
3. Adjust the settings for each copy such as Reduce/Enlarge,
Duplex/N-Up, Output, Paper Source, etc.
You can set the default Quick Copy options from Machine Setup
> Application Setting > Copy Settings from the display screen.
Set the most frequently used settings.
4. Enter the number of copies using the numeric keypad on the control
panel, if necessary.
5. Press
Copying_ 64
(Start) from the control panel to begin copying.
Faxing (optional)
4.
This guide gives you information about using your machine as a fax machine.
This chapter includes:
•
•
•
•
•
•
•
•
•
Preparing to fax
Sending a fax from your computer
Understanding the fax screen
Sending a fax
Receiving a fax
•
•
You cannot use this machine as a fax through the internet phone
line. For more information ask the internet service provider.
We recommend you to use traditional analog phone services
(PSTN: public switched telephone network) when connecting
telephone lines to use Fax. If you use other Internet services (DSL,
ISDN, VolP), you can improve the connection quality by using the
Micro-filter. The Micro-filter eliminates unnecessary noise signals
and improves connection quality or Internet quality. Since the DSL
Micro-filter is not provided with the machine, contact your Internet
Service provider for use on DSL Micro-filter.
Adjusting the document settings
Printing a fax report
Using a programs setting
Saving and loading documents
3. Select Samsung Network PC Fax from the Print window
4. Click Print or OK.
5. Enter the recipient’s fax number and set the options if necessary.
For more information about Samsung Network PC Fax, click
Help.
1 Line port
2 Micro filter
3 DSL modem / Telephone line
Preparing to fax
6. Click Send.
Before you send or receive a fax, you need to connect the supplied phone
line cord to the wall jack. Refer to the optional fax kit Installation Guide for
how to make a connection. The method of making a telephone connection
varies from one country to another.
Sending a fax from your computer
Checking the sent fax list (Windows)
You can check the sent fax list from your computer.
From the Start menu, click Programs or All Programs > Samsung
Printers > Network PC Fax > Fax Journal. Then, the Fax Journal
appears with the list of faxes sent.
You can send a fax from your computer without going to the machine. Make
sure that your machine and the computer are connected to the same
network.
Sending a fax (Windows)
To send a fax from your computer, the Samsung Network PC Fax program
must be installed. This program is installed when you install the printer
driver.
1. Open the document to be sent.
2. Select Print from the File menu.
The Print window will be displayed. It may look slightly different
depending on your application.
Faxing (optional)_ 65
For more information about Fax Journal, click Help.
Sending a fax (MAC)
To send a fax from your computer, the Fax Utilities program must be
installed. This program is installed when you install the printer driver.
The following steps are based on the Mac OS X 10.5 or 10.6. Depending on
the OS version, the following steps will be different.
1. Open the document to be sent.
2. Select Print from the File menu.
The Print window will be displayed. It may look slightly different
depending on your application.
) appears on your MAC dock. Click the icon.
10. The Fax icon (
You can see the status of the fax job. You can also delete, hold, resume,
and pause the fax job.
3. Select Samsung CLX-9201 9301 Series fax from the drop-down list in
Printer.
4. Choose the number of copies and pages.
5. Choose your paper size, orientation, and scale.
6. Enter the recipients’ fax number into To’s input area. You can also use
Addresses pressing
numbers.
button, if you have stored frequently used fax
7. If necessary, enter the access code in the Dialing Prefix input area.
8. If necessary, you can send the fax with a cover page: check Use Cover
Page.
Enter the subject and message of the fax job.
You can set more detailed options for cover page options in
Samsung Fax Cover Page. Select Samsung Fax Cover Page
from the drop-down list under Orientation.
9. Click Fax.
Faxing (optional)_ 66
Understanding the fax screen
Advanced tab
To use the fax feature, press Fax on the display screen.
If you want to use this feature, you need to install the optional fax kit
on your machine.
If a different screen is displayed, press (
screen.
) to go to the home display
•
•
•
•
Basic tab
•
•
•
•
Original Size: Selects the size of the original (see "Selecting the size of
originals" on page 71).
Duplex: Selects whether the machine sends faxes one side of the
original or both sides of the original (see "Faxing on both sides of
originals" on page 71).
Original Orientation: Selects the orientation of the originals (see
"Selecting the orientation of originals" on page 72).
Delay Send: Sets the machine to send a fax at a later time without your
intervention (see "Delaying a fax transmission" on page 69).
Image tab
Fax number input area: Enter the recipient's fax number using the
numeric keypad on the control panel. If you configured the address
book, press Address Book (see "Setting up an address book using the
control panel" on page 94 or "Setting up an address book using
SyncThru™ Web Service" on page 96).
Resolution: Adjusts the resolution options (see "Changing the
resolution" on page 72).
Address Book: Enters the recipient's fax number just by pressing
stored numbers. You can save frequently used fax numbers using the
control panel or SyncThru™ Web Service (see "Setting up an address
book using the control panel" on page 94 or "Setting up an address book
using SyncThru™ Web Service" on page 96).
Programs: Allows you to save the current settings for future use (see
"Using a programs setting" on page 74).
•
Original Type: Enhances the fax quality based on the type of the
original document being scanned (see "Selecting the type of originals"
on page 73).
Faxing (optional)_ 67
Sending a fax
7. Press Start on the control panel. The machine starts to scan and send a
fax to the destinations.
This part explains how to send a fax and the special methods of
transmission.
•
When you place the originals, you can use either the DADF or the
scanner glass. If the originals are placed on both the DADF and the
scanner glass, the machine will read the originals on the DADF first,
because it has higher priority in scanning.
•
•
Setting the fax header
In some countries, you are required by law to indicate your fax number on
any fax you send.
1. Press Machine Setup > Application Settings > Fax Settings >
Machine ID & Fax No from the display screen.
•
You can send a fax directly from your computer (see "Sending a
fax from your computer" on page 65).
When you want to cancel a fax job, press Stop on the control
panel before the machine starts transmission, or press the Job
Status button on the control panel, and select the job you want to
delete, then press Delete (see "Job Status button" on page 36).
If an original is placed on the scanner glass, the machine shows
the window asking if you want to place another page. Load another
original and press Yes. When you finish, press No on this window.
While the machine is sending a fax, you cannot send an email at
the same time.
Sending a fax using speed dial numbers
2. Press a fax line if your machine has multiple fax lines.
3. Press the ID Name input area. The pop-up keyboard appears.
Enter your name or the company name. Press OK.
4. Press the Fax Number input area.
Enter your fax number using the numeric keypad on the control panel.
5. Press OK to save the information.
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number you set previously (see "Setting up an address
book" on page 94).
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Fax from the display screen.
3. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 71).
4. Press the Basic tab.
5. Select Resolution (see "Changing the resolution" on page 72).
6. When the cursor is blinking in the input line:
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button using the numeric keypad on the control
panel.
• For a two- or three-digit speed dial number, press the first digit
button(s) and then hold down the last digit button using the numeric
keypad on the control panel.
7. Press Start on the control panel.
The machine starts to scan and send a fax to the destination.
Sending a fax
Sending a fax manually using On Hook
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
This machine automatically reduces the original document to fit the
paper size of the recipient’s fax. For example, the origianl
document size is A3-sized paper and the paper loaded on
recipient’s fax is A4-sized paper, the original paper get reduced to
be fit to A4-sized paper.
2. Press Fax from the display screen.
3. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 71).
4. Press the Basic tab.
5. Select Resolution (see "Changing the resolution" on page 72).
6. When the cursor is blinking in the input line, enter the fax number using
the numeric keypad on the control panel, or use Address Book from the
display screen, if you have stored frequently used fax numbers.
•
•
You can send a fax to up to 10 destinations at once.
To insert a pause, press Pause at the appropriate place while
entering the fax number. “-” appears on the display at the
corresponding location.
This method is sending a fax using On Hook in the Basic tab.
When you use Delay Send, Quick Start Fax and Priority Send in the
Advanced tab, you cannot send a fax using On Hook.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Fax from the display screen.
3. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 71).
4. Press the Basic tab.
5. Select Resolution (see "Changing the resolution" on page 72).
6. Press On Hook on the display screen.
7. When you hear the dial tone, enter a fax number using the numeric
keypad on the control panel.
8. Press Start when you hear a high-pitched fax signal from the remote fax
machine.
Faxing (optional)_ 68
Sending a fax manually using an extension
telephone
•
This method is sending a fax using an extension telephone. Make sure that
the extension telephone is connected to the EXT socket of the fax kit on the
machine.
While you are talking over the telephone connected to the EXT socket,
copy and scan features are not available.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Fax from the display screen.
3. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 71).
4. Press the Basic tab.
5. Select Resolution (see "Changing the resolution" on page 72).
6. Pick up the receiver of the extension telephone.
7. When you hear the dial tone, dial a fax number using the extension
telephone.
8. Press Start on the control panel when you hear a high-pitched fax signal
from the extension telephone.
1.
2.
3.
4.
5.
6.
7.
When you use this option, Quick Start Fax and Priority Send in
the Advanced tab are inactivated.
• When you use this option, you cannot send a fax using the On
Hook button on the display screen.
Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
Press Fax from the display screen.
Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 71).
Press the Basic tab.
Select Resolution (see "Changing the resolution" on page 72).
When the cursor is blinking in the input line, enter the fax number using
the numeric keypad on the control panel. Or use Address Book from
the display screen, if you have stored frequently used fax numbers.
Press the Advanced tab > Delay Send .
Resending Automatically
When the line you have dialed is busy or there is no answer when you send
a fax, the machine automatically redials the number.
To change the time interval between redials and/or the number of redial
attempts, follow the steps below:
1. Press Machine Setup > Application Settings > Fax Settings > Redial
from the display screen.
2. Press a fax line if your machine has multiple fax lines.
3. Set the Redial Term [1-15] Min option using the up/down arrows.
4. Set the Redial Times [0-13] option using the up/down arrows.
Redialing the last number
Recent: Shows the last 10 fax numbers dialed. Also, you can choose fax
numbers instead of pressing the number key.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Fax from the display screen.
3. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 71).
4. Press the Basic tab.
5. Select Resolution (see "Changing the resolution" on page 72).
6. Press Recent.
7. Press the fax number you want to redial. Then press OK.
8. Press the Job Name input area. Then the pop-up keyboard appears.
Enter the job name you want. Press Done.
If you do not enter a job name, the machine assigns the job name as
'Fax Job Send'.
9. Set the delay sending time.
You can set the delay sending time to be greater than 15 minutes
later than the current time. For example, if it is 1:00, then you can
set the time starting to be 1:15. If the set time is incorrect, a
warning message will appear when the machine resets it to the
current time.
10. Press Start on the control panel. The machine starts to store the
scanned original data into memory.
To cancel delaying a fax, press Off before sending is activated.
•
Add to Address: Allows you to add a fax number in the
Recent results to Address Book.
• Delete: Allows you to delete a fax number in the Recent
results. Press the fax number you want to delete. Then press
Delete.
8. Press Start on the control panel. The machine starts to scan and send a
fax to destinations.
Delaying a fax transmission
You can set your machine to send a fax at a later time when you will not be
present.
Faxing (optional)_ 69
Receiving a fax
4. Press OK.
This part explains how to receive a fax and the special receiving methods
available.
Receiving in secure receiving mode
Changing the receive modes
Your machine is preset to the Fax mode at the factory. When you receive a
fax, the machine answers the call on a specified number of rings and
automatically receives the fax. However, if you want to change the receive
mode to another mode, follow the steps below:
1. Press Machine Setup > Application Settings > Fax Settings > Fax
Initial Settings from the display screen.
2. Press a fax line if your machine has multiple fax lines.
You may need to prevent your received faxes from being accessed by
unauthorized people. You can turn on secure receiving mode to restrict
printing of received faxes when the machine is unattended. In secure
receiving mode, all incoming faxes go into memory.
1. Press Machine Setup > Application Settings > Fax Settings >
Secure Receive from the display screen.
The Secure Receive mode can only be configured by an
authorized user who has registered an ID and a password on the
machine. When the machine requests, enter the ID and password.
2. Press a fax line if your machine has multiple fax lines.
3. Press On to active this feature.
When the machine receives a fax in this mode, Print will be
activated. If you want to print the secured faxes, press Print. All
secured faxes will be printed out.
4. If you want incoming faxes to go into memory always, press Whole Day.
Otherwise, go to the next step.
5. Set Start Time by pressing the + and - buttons. Press OK.
3. Press Receive Mode.
4. Press the appropriate option.
• Telephone: Receives a fax by pressing On Hook and then Start.
• Fax: Answers an incoming fax call and immediately goes into the
fax reception mode.
• Answering Machine/Fax: Is for when an answering machine is
attached to your machine. Your machine answers an incoming call,
and the caller can leave a message on the answering machine. If the
fax machine senses a fax tone on the line, the machine automatically
switches to Fax mode to receive the fax.
5. Press OK to save the information.
Receiving manually in Telephone mode
You can receive a fax call by pressing On Hook and then pressing Start
when you hear a fax tone from the remote machine. The machine begins
receiving a fax.
6. Press End Time, and set the specific end time using the up/down or
left/right arrows. Then press OK.
7. Press OK from the display screen.
To deactivate the Secure Receive feature, press Off. In this case, the
received fax will be printed out.
Receiving faxes manually using an extension
telephone
This feature works best when you are using an extension telephone
connected to the EXT socket on the back of your machine.
When you receive a call on the extension phone and hear fax tones, press
the key *9* on the extension phone. The machine receives the fax.
Press the buttons slowly in sequence. If you still hear the fax tone from the
remote machine, try pressing *9* once again.
To change the *9* to, for example, *3*, follow the steps below:
1. Press Machine Setup > Application Settings > Fax Settings >
Recieve Start Code from the display screen.
2. Press On to activate this feature.
3. Enter the number 3 using the numeric keypad on the control panel
Faxing (optional)_ 70
Selecting a received fax output tray
Adjusting the document settings
This option allows you to specify the tray where the fax will be printed.
1. Press Machine Setup > Application Settings > Fax Settings >
Received Fax Printing > Output Tray from the display screen.
Before sending a fax, you can adjust the document settings, such as
resolution, darkness, color, duplex and so on.
The document setting herein is for the current job only. If you want to
change the default settings on document settings, refer to Machine
Setup > Application Settings > Fax Settings > Default Value.
Selecting the size of originals
A fax can be sent after specifying the original document size if the original
document size cannot be detected automatically or if you wish to specify a
certain document size.
1. Press the Advanced tab > Original Size from the display screen..
2. Press the appropriate tray.
•
In CLX-9301 Series, the Right Tray (Face-Up) is optional
device.
• The Finishing Tray and Top Tray are available only when the
optional Inner Finisher or booklet finisher is installed.
• When the optional Inner Finisher or booklet finisher is installed,
Center Tray is inactivated.
3. Press OK.
Printing received faxes on both sides of the paper
Set this duplex feature to save paper. When the machine prints the received
fax data, it prints them on both sides of the paper.
1. Press Machine Setup > Application Settings > Fax Settings >
Received Fax Printing > Duplex from the display screen.
2. Press the appropriate option.
• Off: Prints on only one side of the paper.
• Long Edge: Prints on both sides of the paper; however, the binding
will be the long edge.
• Short Edge: Prints on both sides of the paper; however, the binding
will be the short edge.
3. Press OK.
Printing received faxes to the right tray (face up)
This machine allows you to receive incoming faxes through the right tray
(face up). When you use the right tray, the received faxes pile up in
sequence beginning with the first page at the bottom.
1. Press Machine Setup > Application Settings > Fax Settings >
Received Fax Printing > Output Tray > Right Tray(Face-Up) from the
display screen.
2. Press OK.
2. Press the appropriate option.
You can change the paper list on the display screen pressing inch
Size or mm Size. The paper list is divided into the available A/B
size type and letter size type paper in this machine.
•
Auto: Automatically detects the size of originals, but this option
supports only when originals are Letter-, Ledger-, Legal-,
Statement-, A3-, A4-, A5-, B4-, or JIS B5-sized.
• Other preset values: Allows you to easily select values commonly
used.
3. Press OK from the display screen.
Faxing on both sides of originals
This function is especially intended for two-sided originals. You can select
whether the machine sends the fax on one side or both sides of the paper.
1. Press the Advanced tab > Duplex, then set the original orientation.
Receiving faxes in memory
Since your machine is a multi-tasking device, it can receive faxes while you
are making copies or printing. If you receive a fax while you are copying or
printing, your machine stores incoming faxes in its memory. Then, as soon
as you finish copying or printing, the machine automatically prints the fax.
2. Press the appropriate option.
Faxing (optional)_ 71
•
•
•
1 Sided: For originals that are printed on one side only.
2 Sided, Book: For originals that are printed on both sides.
2 Sided, Calendar: For originals that are printed on both sides, but
the back is rotated 180 degrees.
2. Press the appropriate option.
• Upright Images: Select this setting for an original document loaded
with the top toward the back of the machine.
Using the DADF
To use 2 Sided, Book and 2 Sided, Calendar, load the originals
on the DADF. If the machine cannot detect the original on the
DADF, it automatically changes the option to 1 Sided.
Using the scanner
glass
Icon
3. Press OK from the display screen.
Selecting the orientation of originals
When faxing double-sided documents, specify the document orientation.
Otherwise, the faxes may not be printed in the correct page order or correct
front and back page arrangement.
1. Press the Advanced tab > Original Orientation, then set the original
orientation.
•
Sideways Images: Select this setting for an original document
loaded into the DADF with the top of the original document toward
the left side of the machine, or an original document placed on the
scan glass with the top of the original document toward the right side
of the machine.
Using the DADF
Using the scanner
glass
Icon
3. Press OK from the display screen.
Changing the resolution
The default document settings produce good results when using typical
text-based originals. However, if you send originals that are of poor quality,
or contain photographs, you can adjust the resolution to produce a higher
quality fax.
Press left/right arrow to toggle the values.
• Standard: Usually recommended for originals with text. This option will
reduce the transmission time.
• Fine: Recommended for the originals containing small characters, thin
lines, or text that was printed using a dot-matrix machine.
• Super Fine: Recommended for originals containing fine detail. This
option is enabled only if the receiving machine also supports Super Fine
resolution.
• Ultra Fine: Recommended for originals containing extremely fine detail.
Faxing (optional)_ 72
This option is enabled only if the receiving machine also supports Ultra
Fine resolution.
When your machine is set to the Super Fine or Ultra Fine resolution
and the fax machine with which you are communicating does not
support the Super Fine or Ultra Fine resolution, the machine
transmits using the highest resolution mode supported by the other fax
machine.
Selecting the type of originals
2. Press the appropriate option.
• Text: For originals with text or line art.
• Text/Photo: For originals with both text and photographs together.
• Photo: For originals that are a continuous tone photograph.
You can select the degree of darkness of the original document.
1. Press the Basic tab > Darkness from the display screen.
You can set the machine to print a report whether a fax transmission and
reception is successfully completed or not.
If a report contains characters or fonts that the machine do not
support, Unknown could be printed instead of the characters/fonts in
the report.
1. Press Machine Setup > Report > Fax Reports > Settings from the
display screen.
You can set the original document type to enhance the quality of a
document being scanned.
1. Press the Image tab > Original Type from the display screen.
Changing the darkness
Printing a fax report
2. Press the appropriate option.
• Multi Fax Transmission Result: Prints a confirmation report when
you send a fax to multiple locations.
- Off: Disables this feature.
- On: Activates this feature.
- On-Error: Prints a report only when a transmission fails.
• Fax Transmission Result: Prints a confirmation report showing
whether a transmission was successful, how many pages were sent,
and other information.
- Off: Disables this feature.
- On: Activates this feature.
- On-Error: Prints a report only when a transmission fails.
• Fax Transmission History: Prints a confirmation report whether a
transmission was successful, how many pages were sent, and other
information.
- Off: Disables this feature.
- On: Activates this feature.
• Fax Reception History: Prints a confirmation report whether a
reception was successful, how many pages were received, and other
information.
- Off: Disables this feature.
- On: Activates this feature.
3. Press OK from the display screen.
2. Press left/right arrow to change the level of light and dark.
Faxing (optional)_ 73
Using a programs setting
the same time.
This option allows you to save the current settings for future use. You can
also use the previous settings from the previous job.
Saving Programs
1. Press Fax from the display screen.
2. Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 71).
3. Press the Basic tab.
4. Select Resolution (see "Changing the resolution" on page 72).
5. Press Programs.
Managing Programs
1. Press Fax from the display screen.
2. Press Programs > List.
3. Press the appropriate option.
• Select All: Selects all programs.
• Detail: Displays detailed information of selected program.
• Edit: Changes a name of selected program.
• Delete: Removes the selected programs.
4. Press Cancel for return to the Basic tab.
6. Press Program Name input area. The pop-up keyboard appears.
Enter the program name you want. Then press OK.
Saving and loading documents
You can see the values of set Programs by scrolling up or down
and check the values using the up/down arrows.
7. Press Save. When the confirmation window appears, the settings you
set are saved. Click Go to List or Close.
Using Programs
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Fax from the display screen.
3. When the cursor is blinking in the input line, enter the fax number using
the numeric keypad on the control panel, or use Address Book from the
display screen, if you have stored frequently used fax numbers.
4. Press Programs > List.
5. Press a program name in the list that you want to use.
6. Press OK.
7. Press Yes when the confirmation window appears.
The machine is now set to fax according to the selected setting.
8. Press Start on the control panel. The machine starts scanning and
sending a fax to destinations.
•
•
•
When you want to cancel a fax job, press Stop on the control
panel before the machine starts transmission or press the Job
Status button on the control panel, and select the job you want to
delete, then press Delete.
If an original is placed on the scanner glass, the machine shows
the window asking if you want to place another page. Load another
original and press Yes. When you finish, press No on this window.
While the machine is sending a fax, you cannot send an email at
This option allows you to save the current settings for future use. You can
also use the previous settings from the last job.
Saving
1. Press Scan to Email, Scan to Server , Scan to Shared Folder or
Scan to USB from the display screen.
2. Set scan features in the Advanced, Image, or Output tabs ("Changing
the scan feature settings" on page 81).
3. Press the Basic tab.
4. Set the scan quality by Duplex and Resolution.
5. Press Programs > Save.
6. Press Program Name input area. The pop-up keyboard appears.
Enter the program name you want. Then press OK.
Faxing (optional)_ 74
You can see the values of set Programs by scrolling up or down
and check the values using the up/down arrows.
7. Press Save.
8. You can check the all settings again. If everything is fine, press Add to
home to make shortcut in main screen, Save to save current settings or
cancel to quit without saving.
Loading
1. Press Scan to Email, Scan to Server or Scan to USB from the display
screen.
2. Press Programs > Load.
3. Press the previous setting you want to use.
The machine is now set to scan according to the setting you selected.
4. Press Add to home to make a shortcut in main screen, Delete to delete
the current setting or Apply to use the selected setting.
Faxing (optional)_ 75
Scanning
5.
Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer.
This chapter includes:
•
•
•
•
•
•
Basic scanning method
Understanding the scan methods
Scanning originals and sending through email (scan to email)
Scanning originals and sending via SMB/FTP (Scan to server)
Scanning originals and sending to a USB memory device (scan to USB)
Changing the scan feature settings
The maximum resolution that can be achieved depends upon various
factors, including computer speed, available disk space, memory, the
size of the image being scanned, and bit depth settings. Thus,
depending on your system and what you are scanning, you may not
be able to scan at certain resolutions, especially using enhanced
resolution.
•
•
•
•
•
Using a programs setting
Scanning originals and sending to your computer (scan to PC)
Scanning with TWAIN-enabled software
MAC scanning
Linux scanning
If a different screen is displayed, press (
screen.
) to go to the home display
Basic scanning method
You can scan the originals with your machine via the network.
• Easy Printer Manager(EPM): EPM is a Windows-based application
that combines Samsung device settings into one location.
• TWAIN: TWAIN is the one of preset imaging applications. Scanning an
image launches the selected application, enabling you to control the
scanning process. This feature can be used via a network connection
(see "Scanning with TWAIN-enabled software" on page 86).
• Easy Document Creator(EDC): This program is accompanying
software for your machine. You can use this program to scan images or
documents. (see "Understanding Samsung Easy Document Creator" on
page 121).
• Email: You can send the scanned image as an email attachment (see
"Scanning originals and sending through email (scan to email)" on
page 77).
• Server: You can scan an image and send it to a server such as FTP or
SMB (see "Scanning originals and sending via SMB/FTP (Scan to
server)" on page 78).
• USB: You can scan an image and store it to a USB memory device (see
"Scanning originals and sending to a USB memory device (scan to
USB)" on page 80).
•
•
•
If you want to use this feature, you need to insert a USB memory
device into the USB memory port on your machine.
•
Understanding the scan methods
To use the scanning feature, press Scan to Email, Scan to USB, Scan to
Server, Scan to PC, or Scan to Shared Folder on the display screen.
Scan to Email: Scans and sends scanned output to the destination by
e-mail (see "Scanning originals and sending through email (scan to
email)" on page 77).
Scan to Server: Scans and sends scanned output to the destination
with SMB or FTP (see "Scanning originals and sending via SMB/FTP
(Scan to server)" on page 78).
Scan to USB: Scans and stores scanned output onto a USB memory
device (see "Scanning originals and sending to a USB memory device
(scan to USB)" on page 80).
•
Scanning_ 76
Scan to PC: Scans and sends scanned output to a computer (see
"Scanning originals and sending to your computer (scan to PC)" on
page 86).
Scan to Shared Folder: Scans and stores scanned output in the
shared folder.
Scanning originals and sending through email
(scan to email)
Advanced tab
You can scan originals and send the scanned image to several destinations
from the machine by email.
To scan and send an image as an email attachment, you need to set
up network parameters, SMTP settings and Scan to Email settings
using the control panel or SyncThru™ Web Service. For details about
how to set up the network parameters and email settings, refer to the
Administrator’s Guide on the supplied CD.
Understanding the Scan to Email screen
Press Scan to Email in the display screen.
Basic tab
•
•
•
•
Original Size: Selects the size of originals (see "Selecting the size
of originals" on page 83).
Original Orientation: Selects the orientation of the originals (see
"Selecting the orientation of originals" on page 82).
E-mail Setting: Enter the information including From, Subject and
Message.
Duplex: Sets the machine to print copies on both sides of the paper.
Image tab
You can move to the next or previous page using the up/down arrows
located at the bottom left.
•
•
•
•
•
•
•
•
•
•
•
•
Send To Me: Press the Advanced tab > Email Settings, then type
the sender’s email address. Clcik the checkbox on the right to send
to yourself.
Direct Input: Tap the screen to add recipient’s email addresses.
File Name: Makes the file name for the file to be sent(see "File
Policy" on page 84).
File Format: Select the file format before you proceed with the
scanning job (see "File Format" on page 84).
Resolution: Selects scanning resolution value (see "Changing the
resolution" on page 81).
Darkness: Adjusts the degree of darkness of scanned output (see
"Changing Darkness" on page 81).
Recent: Shows the latest 10 email addresses used. Also, you can
choose email addresses instead of pressing the pop-up keyboard
(see "Resending to the last email address" on page 78).
(
)Favorite: shows the frequently used addresses.
All: Shows all the addresses.
ABC: Shows the addresses that contains English characters.
123/!@#: shows the addresses that contains numbers or special
characters.
Programs: Allows you to save the current settings for future use
(see "Using a programs setting" on page 85).
•
•
•
•
Scanning_ 77
Original Type: Selects whether the original is text, photo, etc (see
"Selecting the type of originals" on page 83).
Color Mode: Adjusts the color options of scanned output (see
"Selecting the color mode" on page 83).
Adjust Background: Erase the background to some extent by
adjusting density or brightness (see "Adjusting background" on
page 83).
Erase Backside: Prevents scanning the other side’s image shown
through the original paper (see "Erasing backside Images" on
page 84).
Output tab
•
•
1. Press Machine Setup > Application Setting > Scan to Email Settings
from the display screen.
Quality: Adjusts the display quality of the scanned output (see
"Quality" on page 84).
File Name: Makes the file name for the file to be sent (see "File
Policy" on page 84).
Resending to the last email address
To resend to the last used email address:
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Scan to Email from the display screen.
3. Set the scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 81).
4. Press the Basic tab.
5. Press To’s input area and Recent.
6. Press the email address which you want to re-send.. Then press OK.
Add to Address: Allows you to add an email address in the
Recent results to the Address Book.
• Delete: Allows you to delete an email address in the Recent
results. Press the email address you want to delete. Then
press Delete.
7. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 82 and "Changing the resolution" on
page 81).
8. Press the Start button to scan and send the file.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
2. Press the appropriate option in Print Confirmation Sheets.
• On Errors Only: Prints a confirmation report only when an email
transmission is not successful.
• Always: Always prints a confirmation report whether an email
transmission is successfully completed or not.
• Never: Never prints a confirmation report.
3. Press
to go back to the previous screen.
Scanning originals and sending via SMB/FTP
(Scan to server)
You can scan an image and send it to a total of three destinations via SMB
or FTP.
To scan and send an image to a server, you need to set up network
parameters using the control panel or SyncThru™ Web Service. For
details about how to set up the network parameters, refer to the
Administrator’s Guide on the User’s Guide CD.
•
Understanding the Scan to Server screen
Press Scan to Server in the display screen.
Basic tab
Printing an email confirmation report
You can set the machine to print a report whether an email transmission is
successfully completed or not.
If a report contains characters or fonts that the machine does not
support, Unknown could be printed instead of the characters/fonts in
the report.
•
•
Scanning_ 78
Filename: Makes the file name for the file to be sent (see "File
Policy" on page 84).
Address Book: Inputs the recipient's address by pressing stored
addresses. You can save frequently used email addresses using the
control panel or SyncThru™ Web Service (see "Setting up an
address book using the control panel" on page 94 or "Setting up an
•
•
•
•
Output tab
address book using SyncThru™ Web Service" on page 96).
Recent: Shows the latest 10 email addresses used. Also, you can
choose email addresses instead of pressing the pop-up keyboard
(see "Resending to the last email address" on page 78).
Resolution: Selects scanning resolution value (see "Changing the
resolution" on page 81).
Programs: Allows you to save the current settings for future use
(see "Using a programs setting" on page 85).
Darkness: Adjusts the degree of darkness of scanned output (see
"Changing Darkness" on page 81).
Advanced tab
•
Quality: Adjusts the display quality of the scanned output (see
"Quality" on page 84).
File Format: Selects the file format of the scanned output (see "File
Format" on page 84).
•
Scanning and sending to an SMB/FTP server
You can select up to three destinations using SMB, or FTP servers.
•
•
•
Original Size: Selects the size of originals (see "Selecting the size
of originals" on page 83).
Original Orientation: Selects the orientation of the originals (see
"Selecting the orientation of originals" on page 82).
Duplex: Sets the machine to print copies on both sides of the paper.
Image tab
You can move to the next or previous page using the up/down arrows
located at the bottom left.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Scan to Server from the display screen
3. Set the scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 81).
4. Press the Basic tab.
5. Press the server name input area, you can enter a recipient’s server
address manually. You cannot enter an address in the second field
before entering an address in the first field.
You can also use Address Book to enter the addresses easily (see
"Setting up an address book" on page 94).
6. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 82 and "Changing the resolution" on
page 81).
7. Press Start on the control panel.
The machine begins scanning and then sends the scanned image to the
specified server.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
•
•
•
•
•
Original Type: Selects whether the original is text, photo, etc. (see
"Selecting the type of originals" on page 83).
Color Mode: Adjusts the color options of scanned output (see
"Selecting the color mode" on page 83).
Adjust Background: Erase the background to some extent by
adjusting density or brightness (see "Adjusting background" on
page 83).
Erase Backside: Prevents scanning the other side’s image shown
through the original paper (see "Erasing backside Images" on
page 84).
•
To cancel the current scan job, press Stop on the control panel. Or
you can delete current and pending jobs using Job Status on the
control panel. Select the job you want to cancel and press Delete
(see "Job Status button" on page 36).
While the machine is sending a scanned data, you cannot use the
machine to copy or to send a fax.
Resending to the last server address
To resend a file to the server address last sent to:
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Scan to Server from the display screen.
Scanning_ 79
3. Set the scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 81).
4. Press the Basic tab.
5. Press Recent.
6. Press the server address to which you want to resend. Then press OK.
Add to Address: Allows you to add a server address in the
Recent results to the Address Book.
• Delete: Allows you to delete a server address in the Recent
results. Press the server address you want to delete. Then
press Delete.
7. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 82 and "Changing the resolution" on
page 81).
8. Press the Start button to scan and send the file.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
Advanced tab
•
Scanning originals and sending to a USB
memory device (scan to USB)
•
•
•
You can scan a document and save the scanned image onto a USB
memory device. When you scan a document, the machine uses the default
settings, such as for resolution. You can also customize your own scan
settings (see "Changing the scan feature settings" on page 81).
•
Original Size: Selects the size of originals (see "Selecting the size
of originals" on page 83).
Original Orientation: Selects the orientation of the originals (see
"Selecting the orientation of originals" on page 82).
E-mail Setting: Enter the information including From, Subject, and
Message.
Duplex: Sets the machine to print copies on both sides of the paper.
Image tab
You can move to next or previous pages using the up/down arrows
located at the bottom left.
Understanding the Scan to USB screen
Press Scan to USB in the display screen.
Basic tab
•
•
•
•
•
•
•
•
•
•
•
Go to upper: Moves back to the upper level.
Select: Moves to the selected folder.
New folder: Makes a new folder in the USB memory device.
Detail: Displays information of the selected folder or file.
Edit: Changes the name of the selected folder or file.
Delete: Deletes the selected folder or file.
File Name: Makes a file name to store the scan data.
Resolution: Selects the scanning resolution value (see "Changing
the resolution" on page 81).
Programs: Allows you to save the current settings for future use
(see "Using a programs setting" on page 85).
Scanning_ 80
•
•
Original Type: Selects whether the original is text, photo, etc. (see
"Selecting the type of originals" on page 83).
Color Mode: Adjusts the color options of scanned output (see
"Selecting the color mode" on page 83).
Adjust Background: Erase the background to some extent by
adjusting density or brightness (see "Adjusting background" on
page 83).
Erase Backside: Prevents scanning the other side’s image shown
through the original paper (see "Erasing backside Images" on
page 84).
Output tab
11. After scanning is complete, you can remove the USB memory device
from the machine.
Changing the scan feature settings
This section explains how to adjust the document settings for each scan job,
such as resolution, duplex, original size, type, color mode, darkness, and
more. The settings you change will be maintained for a certain time, but
after that period, the options will be reset to default values.
•
Quality: Adjusts the display quality of the scanned output (see
"Quality" on page 84).
File Format: Selects the file format of the scan output (see "File
Format" on page 84).
File Policy: Automatically renames or overwrites when the USB
memory device has a file with same name (see "File Policy" on
page 84).
•
•
Scanning to a USB memory device
•
The machine cannot detect the unformatted USB memory device.
Format and then reinsert the USB memory device into the USB
memory port on your machine.
• The machine could not detect the USB memory device when the
machine is in power save mode. Wait until the machine returns to
ready mode, and then reinsert the USB memory device into the
USB memory port on your machine.
• The machine has two USB memory ports. When a USB memory is
already inserted to one of the ports, if you try to insert a USB
memory device into another port, the machine cannot detect the
second one. Remove the USB memory device that was inserted
first and then reinsert the USB memory device you want to use into
the USB memory port on your machine.
1. Insert a USB memory device into the USB memory port on your
machine.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Press Scan to USB from the display screen.
4. Press the Basic tab.
5. Select a folder for storing the scanned image. If you do not select a
folder, the scanned image is stored in root directory.
6. Press the File Name input area. The pop-up keyboard appears.
7. Enter a file name to store the scan data. Press Done.
8. Set the File format, Resolution, and Darkness (see "Scanning from
both sides of originals" on page 82 and "Changing the resolution" on
page 81).
9. Set the scan features in the Advanced, Image, or Output tabs , if
necessary (see "Changing the scan feature settings" on page 81).
10. Press the Start button to scan and store the file.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
Changing the resolution
You can adjust document resolution.
Press the resolution and choose the values. The higher value you select,
the clearer the result, but the scanning time may take longer.
The following table shows detailed information for this feature, resolution,
and file format options.
Feature
Resolution (dpi)
File Format
Scan to Email
Scan to USB
Scan to Server
100, 200, 300, 600
JPEG, PDF, TIFF, XPS
Scan to Shared
Folder
Changing Darkness
You can select the degree of darkness of the scanned output. If your
original document is light or faded, move the white bar to the right to make
the output darker.
Scanning_ 81
1. Press the white bar and move it to choose the value.
2. Press the appropriate option.
• Upright Images: Select this setting for an original document loaded
with the top toward the back of the machine.
Scanning from both sides of originals
This feature applies to scanning two-sided original documents. You can
select whether the machine scans only one side or both sides of the paper.
Press the Advanced tab > Duplex, then select an option.
•
•
•
Using the DADF
1 Sided: For originals that are printed on one side only.
2 Sided, Book: For originals that are printed on both sides.
2 Sided, Calendar: For originals that are printed on both sides, but the
back is rotated 180 degrees.
•
If an original is placed on the scanner glass, the machine shows the
window asking to place another page. Load another original and press
Yes. When you finish, select No for this option.
Using the scanner
glass
Sideways Images: Select this setting for an original document
loaded into the DADF with the top of the original document toward
the left side of the machine or an original document placed on the
scanner glass with the top of the original document toward the right
side of the machine.
Using the DADF
Using the scanner
glass
Selecting the orientation of originals
1. Press the Advanced tab > Original Orientation, then set the original
orientation.
3. Press
Scanning_ 82
Icon
to go back to the previous screen.
Icon
Selecting the size of originals
•
•
1. Press the Advanced tab > Original Size, then select an option.
Text/Photo: Use for originals with mixed text and photographs.
Photo: Use when originals are photographs.
3. Press
to go back to the previous screen.
Selecting the color mode
Use one of these options to scan the original: Auto, Color, Gray or Mono.
1. Press the Image tab > Color Mode from the display screen. Select the
appropriate option.
2. Press the appropriate option.
You can change the paper list on the display screen by pressing
inch Size or mm Size. The paper list is divided into the available
A/B size type and letter-size type paper in this machine.
•
Custom: Selects the copying area of the original. Press the cardinal
point arrows to set the size.
The custom size is different depending on where the originals
are placed.
In the DADF
•
On the scanner glass
Minimum size
128 x 128 mm
(5 x 5 inches)
25 x 25 mm
(1.0 x 1.0 inches)
Maximum size
297 x 432 mm
(11.7 x 17.0 inches)
297 x 432 mm
(11.7 x 17.0 inches)
2. Press the appropriate option.
• Auto : Automatically detects the color of the original and scans it.
• Color: Uses color to display an image: 24 bits per pixel, 8 bits for
each RGB, is used for 1 pixel.
• Gray: Uses the black gradation to display an image: 8 bits per pixel.
•
Auto: Automatically detects the size of originals, but this option
supports only when originals are Letter, Ledger, Legal, Statement,
A3, A4, A5, B4, or JIS B5-sized.
3. Press
Mono: Displays an image in black and white. 1 bit per pixel.
to go back to the previous screen.
Selecting the type of originals
3. Press
to go back to the previous screen.
The original type setting is used to improve the scan quality by selecting the
document type for the current scanning job.
1. Press the Image tab > Original Type from the display screen.
Adjusting background
Adjust the background to some extent by adjusting density or brightness.
You can lighten, or delete the dark background of colored paper or
newspaper to be scanned.
When you use this option, Erase Backside Image in the Image tab
are inactivated.
2. Press the appropriate option.
• Text: Use for originals containing mostly text.
Scanning_ 83
Quality
1. Press the Image tab > Adjust Background from the display screen.
You can use this option to produce a high-quality document. The higher
quality you select, the larger file size you get.
1. Press the Output tab > Quality from the display screen.
2. Press the appropriate option.
• Off: Disables this feature.
• Auto: Automatically adjusts background brightness.
• Enhance: Darkens the background. Use the left/right arrows to
toggle the values.
• Erase: Lightens the background. Use the left/right arrows to toggle
the values.
3. Press
to go back to the previous screen.
2. Press the appropriate option.
• Best: Produces a high-quality image, but the file size will be larger.
• Normal: Both the image quality and file size will be between Best
and Draft.
• Draft: Produces a low-quality image, but the file size will be smaller.
3. Press OK from the display screen.
Erasing backside Images
When you set Color Mode to Mono in the Image tab, the Quality
option is grayed out.
This feature prevents scanning the other side’s image shown through the
original paper
When you use this feature, Adjust Background in the Image tab are
deactivated.
1. Press the Image tab > Erase Backside Image from the display screen.
2. Press the appropriate option.
• Off: Turns this option off.
• Erase: Lightens the background. Use the left/right arrow’s to toggle
the values.
3. Press
to go back to the previous screen.
File Policy
You can choose the policy for generating file names before you proceed
with the scan job through the USB memory device. If the USB memory
device already has the same name entered, you can rename or overwrite it.
1. Press the Output tab > File Policy from the display screen.
2. Press the appropriate option.
• ChangeName: If the USB memory device already has the same
name when you enter a new file name, the file will be saved as a
different file name that is automatically generated.
• Cancel: Does not send the scanned file if a file with same name is
already on the server.
• Overwrite: The sent file overwrites the existing file.
3. Press
to go back to the previous screen.
File Format
You can select the file format before you proceed with the scanning job.
Scanning_ 84
CD.
1. Press the Output tab > File Format from the display screen.
2. Press the appropriate option.
•
•
JPEG: Scans originals in JPEG format.
PDF: Scans originals in PDF format. You can open the file with the
Adobe Acrobat Reader.
- MultiPage: If you want several originals to be scanned as one
file, press MultiPage.
- Secure: You can set the password for the PDF file created using
this option. You can also set whether to allow users to access the
the created PDF file to print or modify.
- Searchable: The machine detects text in the scanned image
and creates a searchable PDF for text searching. Press this
button and select a language that is used in the scanned image.
Press OK.
This option is available only when the optional advanced
scan kit is installed.
-
-
Compact: You can compress originals to create a small-sized
file, press Compact. This compression method is different from
the normal PDF format. Some data parts can be lost during
compression.
Add Digital Signature: You can insert a digital signature in the
PDF with a certificate.
Only an administrator can manage the digital certificate on
Digital Signature in PDF from SyncThru™ Web Service.
For detailed information about Digital Signature in PDF,
refer to the Administrator’s Guide on the User’s Guide CD.
•
•
TIFF: Scans originals in TIFF (Tagged Image File Format). If you
want several originals to be scanned as one file, press MultiPage.
XPS: Scans originals in XPS (XML Paper Specification). If you want
several originals to be scanned as one file, press MultiPage.
3. Press
to go back to previous screen.
The file format JPEG cannot be selected in the File Format option, if
Mono has been selected for Color Mode in the Image tab.
Setting job completion notification
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
2. Press Scan to Email or Scan to Server from the display screen.
3. Set scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 81).
4. Enter the destinations information.
5. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 82 and "Changing the resolution" on
page 81).
6. Press the Advanced tab > Job Completion Notification.
7. Press On to activate this feature.
8. Press Email Address input area. The pop-up keyboard appears.
Enter the email address to which you want to send the job completion
notification. Press OK.
• You can select the email address pressing Address Book.
• You can enter an email address only.
9. Press Start on the control panel to begin scanning.
Using a programs setting
This option allows you to save the current settings for future use. You can
also use the previous settings from the last job.
Saving
1. Press Scan to Email, Scan to Server , Scan to Shared Folder or
Scan to USB from the display screen.
2. Set scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 81).
3. Press the Basic tab.
4. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 82 and "Changing the resolution" on
page 81).
When the scan to email or scan to server job is completed, this machine can
send the completion notification using email. This feature helps when you
scan and send large quantities of documents. You do not need to wait until
the scan-to-email or scan-to-server job is completed beside the machine.
To receive the job completion notification, you need to set up network
parameters and email settings using the control panel or SyncThru™
Web Service. For details about how to set up the network parameters
and email settings, refer to the Administrator’s Guide on the supplied
Scanning_ 85
3. Press Scan to PC from the display screen.
5. Press Programs > Save.
6. Press Program Name input area. The pop-up keyboard appears.
Enter the program name you want. Then press OK.
You can see the values of set Programs by scrolling up or down
and check the values using the up/down arrows.
7. Press Save.
8. You can check the settings again. If everything is fine, press Add to
home to make a shortcut on the main screen, Save to save current
settings, or Cancel to quit without saving.
4. Select your computer name and press OK. If the machine requests a
password, enter the password using the numeric keypad on the control
panel.
5. Press the application program you want and press Select.
Default setting is My Documents.
6. Set the scan quality with Duplex and Resolution in the Basic tab.
7. Set the size of original in the Advanced tab. If you are not sure of the
original size, select Auto.
8. Set the color mode in the Image tab.
9. Set the file format in which the image is to be saved in the Output tab.
File Format activates only when you select the application
program as My Documents.
Loading
1. Press Scan to Email, Scan to Server or Scan to USB from the display
screen.
2. Press Programs > Load.
3. Press a previous setting you want to use.
The machine is now set to scan according to the selected setting.
4. Press Add to home to make shortcut in main screen, Delete to delete
the current setting or Apply to use the selected setting.
Scanning originals and sending to your
computer (scan to PC)
This option allows you to scan an image on the machine and send it out to
your network-connected computer.
For a network connected machine
Make sure the scanner driver is installed on your computer.
1. Make sure that your machine and the computer are connected to a
network.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
10. Press Start from the control panel to begin scanning.
•
Scanned image is saved in the computer’s My Documents >
My Pictures > Samsung folder.
Scanning with TWAIN-enabled software
If you want to scan documents using other software, you will need to use
TWAIN-compliant software, such as Adobe Photoshop.
Follow the steps below to scan with TWAIN-compliant software:
1. Make sure that the machine is connected to your computer and powered
on.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Open an application, such as Adobe Photoshop.
4. Open the TWAIN window and set the scan options.
5. Scan and save your scanned images.
MAC scanning
You can scan documents using Image Capture program. MAC OS X offers
Image Capture program.
Scanning with network
1. Make sure that the machine is connected to your computer and powered
on.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Start Applications and click Image Capture.
Scanning_ 86
4. For MAC OS X 10.4 ~10.5
Click Devices and click Browse Devices.
For MAC OS X 10.6
Select your device below SHARED. Skip to step 6.
5. For Mac OS X 10.4
Select your machine in Twain devices option. Make sure that Use
TWAIN software checkbox is checked, and click Connect.
• If a warning message appears, click Change Port.. to select port.
• If TWAIN UI appears, from the Preference tab, click Change Port..
to select port.
For Mac OS X 10.5
Make sure that Connected checkbox is checked beside your machine in
Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps
above.
6. Set the scan options on this program.
7. Scan and save your scanned image.
•
•
•
•
For more information about using Image Capture, refer to the
Image Capture’s help.
Use TWAIN-compliant softwares to apply more scan options.
You can also scan using TWAIN-compliant software, such as
Adobe Photoshop.
If scanning does not operate in Image Capture, update Mac OS to
the latest version. Image Capture operates properly in Mac OS X
10.4.7 or higher.
Linux scanning
You can scan a document using the Unified Driver Configurator window.
Scanning
1. Double-click the Unified Driver Configurator on your desktop.
2. Click the
button to switch to Scanners Configuration.
3. Select the scanner on the list.
4. Click Properties.
5. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
6. From the Scanner Properties window, click Preview.
The document is scanned and the image preview appears in the
Preview Pane.
7. Drag the pointer to set the image area to be scanned in the Preview
Pane.
8. Change the scan options in the Image Quality and Scan Area sections.
• Image Quality: This option allows you to select the color
composition and the scan resolution for the image.
• Scan Area: This option allows you to select the page size. The
Advanced button enables you to set the page size manually.
If you want to use one of the preset scan option settings, select the
option from the Job Type drop-down list (see "Adding Job Type
Settings" on page 87).
Click Default to restore the default setting for the scan options.
9. When you finish, click Scan to start scanning.
The status bar appears on the bottom left of the window to show you the
progress of the scan. To cancel scanning, click Cancel.
10. The scanned image appears.
If you want to edit the scanned image, use the toolbar (see "Using the
Image Manager" on page 88).
11. When you are finished, click Save on the toolbar.
12. Select the file directory where you want to save the image and enter the
file name.
13. Click Save.
Adding Job Type Settings
You can save your scan option settings for later use.
To save a new Job Type setting:
If you use only one device and it is connected to the computer and
turned on, your scanner appears on the list and is automatically
selected.
If you have two or more scanners connected to your computer, you can
select any scanner at any time. For example, while acquisition is in
progress on the first scanner, you may select the second scanner, set
the device options and start image acquisition simultaneously.
Scanning_ 87
1.
2.
3.
4.
Change the options from the Scanner Properties window.
Click Save As.
Enter the name for your setting.
Click OK.
Your setting is added to the Saved Settings drop-down list.
To save a Job Type setting for the next scan job:
Tools
1. Select the setting you want to use from the Job Type drop-down list.
2. The next time you open the Scanner Properties window, the saved
setting is automatically selected for the scan job.
Name
Function
Save
Saves the image.
Undo
Cancels your last action.
Redo
Restores the action you canceled.
Using the Image Manager
Scroll
Allows you to scroll through the image.
The Image Manager application provides you with menu commands and
tools to edit your scanned image.
Crop
Crops the selected image area.
Zoom Out
Zooms the image out.
Zoom In
Zooms the image in.
Scale
Allows you to scale the image size; you can
enter the size manually, or set the rate to scale
proportionally, vertically, or horizontally.
Rotate
Allows you to rotate the image; you can select
the number of degrees from the drop-down list.
Flip
Allows you to flip the image vertically or
horizontally.
Brightness
Allows you to adjust the brightness or contrast
of the image, or to invert the image.
Properties
Shows the properties of the image.
To delete a Job Type setting
1. Select the setting you want to delete from the Job Type drop-down
list.
2. Click Delete.
The setting is deleted from the list
Use the following tools to edit the image:
For further details about the Image Manager application, refer to the on
screen help.
Scanning_ 88
Using smarthru workflow, shared folder, and
stored document
6.
This chapter explains how to use SmarThru Workflow with your machine.
This chapter includes:
•
•
About SmarThru Workflow
Understanding the SmarThru Workflow screen
•
Workform execution
About SmarThru Workflow
Understanding the SmarThru Workflow screen
SmarThru™ Workflow is a document sending solution that allows users to
operate devices on the network by performing a set of pre-constructed tasks
called a “Workform.” These Workforms allow repetitive and time-consuming
tasks to be automated, making the users’ work days less tedious and more
productive.
To use the SmarThru Workflow feature, press SmarThru Workflow on
the Main screen.
1
To switch to the other display screen, press the left or right arrow on
the display screen.
2
7
3
8
9
4
13
10
5
11
6
12
1
LDAP Server, Domian Server
8
FTP Server
2
Microsoft Sharepoint Server
9
Fax Server
3
Network Folder
10
Google Docs
4
PCFax Server
11
E-mail Server
5
Database
12
Client Systems
6
User
7
SMTP Server
using Smarthru Workflow, shared Folder, and stored document_ 89
Workflow Screen
3. Select Workform > Workformanager from the main menu.
What are “Workform” and “Metadata”?
A “Workform” is a work process created by combining various
embedded plug-ins together to achieve a desired end result for a
document.
Metadata is extra information provided by the Workform creator for
Workforms that use Scan or Direct input plug-ins.
Public Workform Tab
The Public tab shows public Workforms created for user groups by an
administrator.
•
•
•
Refresh: Refresh the Workform information.
Detail: Shows the details of a Workform.
Select: Select the Workform for job execution
4. Select whether it will be a Public Workform or Private Workform
from the left pane.
5. Click Create.
The Workform Creation page opens.
6. Enter the workform’s properties.
7. Drag-and-drop the plug-ins from the left pane to the appropriate
section in the data pane, or click on the green checkmark that
appears in the icon’s upper-right corner.
Each task in the workform will be performed in the order in which
they appear in the workform.
Private Workform Tab
The Private tab shows private Workforms created for a private user by
the current authenticated user.
•
•
•
Refresh: Refresh the Workform information.
Detail: Shows the details of Workform.
Select: Let users move to next screen for more options.
8. Click Save.
The Workform will appear on the Workform Manager page.
9. If the status is Incomplete, a plug-in has not been configured
completely. Select the workform and click Edit to make changes to
the Workform.
Workform Creation Screen
Add a new Workform, execute SmaThru Workflow and log in. You can
create a maximum of 100 public Workforms.
SmaThruWorkflow should be installed on the network server. To
install SmaThruWorkflow refer to the Administrator’s Guide on the
supplied CD.
Workform Creation
1. Excute SmaThruWorkflow
(Programs>SmarThru Workflow>SmarThru Workflow).
2. Enter your ID and Password to log into the system.
using Smarthru Workflow, shared Folder, and stored document_ 90
Workform execution
Understanding the Shared Folder screen
Users can operate various jobs with Workforms.
1. Press SmarThru Workflow on the main screen.
This feature allows you to use the machine’s memory as a shared folder.
The advantage of this feature is that you can conveniently use the shared
folder through your computer.
2. Press one of the Workforms in the list and Select.
The administrator can set the ID and password to restrict the user’ s
access and also set the maximum number of simultaneous users.
3. Press metadata and Next.
Creating a shared folder
1. Press the
icon in the upper-right corner to create a folder.
2. Enter a foldername in the blank field.
3. Press OK.
Using the shared folder
• Modify: Allows users to modify the selected metadata information.
• Next: Lets user select next metadata.
• Cancel : Quit without saving.
4. If you want to change the settings, change parameters in the Basic,
Advanced, Image and Output tabs.
You can use the shared folder in the exact same way as a normal computer.
Create, edit, and delete the folder or file as a normal Windows folder. You
also store scanned data in the shared folder. You can directly print files
stored in the shared folder. You can print TIFF, BMP, JPEG, and PRN files.
5. Press start on the control panel. The result files will be saved in the
location that you set up while you created the Workform.
using Smarthru Workflow, shared Folder, and stored document_ 91
Registering users
Understanding the Stored Document screen
You can the shared folder in the exact same way as a normal computer.
Create, edit, and delete the folder or file as a normal Windows folder. You
also store scanned data in the shared folder. You can directly print files
stored in the shared folder. You can print TIFF, BMP, JPEG, and PRN files.
1. Press Stored Document on the main screen.
2. Press Public or Private tab, then you can see the saved files.
You can store documents sent from computers or scanned images in the
Stored Document. The Stored Document is located on your machine’s
hard disk drive (HDD), which means the documents are stored on the HDD.
You can create a password for a certain Stored Document, so unauthorized
users cannot access it. Also, you can print stored documents by using a
variety of printing features and send the documents to several destinations
such as email, server, or fax. You can set a Stored Document and use
Stored Document feature with SyncThru™ Web Service (see "Setting up an
address book using SyncThru™ Web Service" on page 96).
If there is no file, you can save files from your PC (see "Print
Mode" on page 105).
If important data is stored in the Stored Document, we recommend
you to backup the data regulary. Samsung disclaims all responsibility
for damage or loss of data caused by misuse or failure of the machine.
3. You can Rename, Delete or Print files.
4. Select Workform > Workformanager from the main menu.
To use the Stored Document feature, press Stored Document on the
display screen.
Stored Document allows you to store the scanned data on the HDD (your
machine's hard disk drive) in your machine. The stored data can be sent to
different destinations like Fax, Email, Server, Box, or USB.
•
•
Public: All users can access the files.
Private: Set up a password to prevent unauthorized persons from
accessing.
using Smarthru Workflow, shared Folder, and stored document_ 92
Saving documents in the Stored Document
1. Press Stored Document on the main screen.
2. Press Public or Private tab, then you can see the saved files.
If there is no file, you can save files from your PC (see "Print
Mode" on page 105).
3. You can Rename, Delete or Print files.
using Smarthru Workflow, shared Folder, and stored document_ 93
Setting up an address book
7.
This guide gives you guidelines for the address book.
This chapter includes:
•
Setting up an address book using the control panel
•
Setting up an address book using the control
panel
You can save frequently used fax numbers, e-mail addresses, SMB server
addresses, and FTP server addresses in your machine.
• Individual: Stores up to 500 recipients’ information.
• Group: Makes groups when you frequently send the same document to
several destinations. You can register up to 500 recipients in a group.
Entries stored here will be available for selection within the sending list
on the Basic tab of Fax, Scan to Email or Scan to Server. Sending
Group can be also setup comprising of many Individual entries.
Setting up an address book using SyncThru™ Web Service
5. Press the E-mail input area. Then enter the e-mail address of the
recipient.
6. Press the OK to save the information.
Storing Individual addresses (SMB, FTP)
1. Press Machine Setup > Application Settings > Address Book > New
> SMB or FTP >
(individual) icon from the display screen.
You cannot register a group as you register an individual in a
group.
Storing Individual address (Fax, E-Mail)
1. Press Machine Setup > Application Settings > Address Book > New
from the display screen
2. Press the Name input area. Then enter the name of the individual.
Check the
(favorite) icon for addresses you often use. You
can easily find them from the search results.
3. Press IP or Host, then press the IP Address/Host input area. Then
enter the server address in dotted decimal notation or a host name.
4. Press the Port No. input area. Then enter the server port number.
5. Press the User Name input area. Then enter the user name.
2. Press the Name input area. Then enter the name of the recipient.
Check the
(favorite) icon for addresses you often use. You
can easily find them from the search results.
3. Speed Dial No. is automatically filled with the first free number.
Speed Dial No. is the number representing a recipient’s
information: you can use the numeric keypad on the control panel.
4. Press the Fax No. input area and enter the fax number using the
numeric keypad on the control panel.
•
Inserting a pause: with some telephone systems, you must dial
an access code (9, for example) and listen for a second dial
tone. In such cases, you must insert a pause in the telephone
number.
•
In case of SMB or FTP, if you want the server to permit access
for unauthorized persons. Press the Anonymous box. This
box is unchecked by default. If you checked the Anonymous
box, go to step 7.
6. Press the Password input area. Then enter the password.
7. Press the User Domain input area. Then enter the domain name.
If the SMB server you entered is not registered on any domain,
leave it blank or enter the computer name of the SMB server.
8. Press the Path input area. Then enter the name of file folder where the
sent files are to be stored.
Example: /FileFolder/
9. Press the File Name input area. Enter the name of the sent file.
10. Select the File Policy option you want using the arrow. If the server has
a file with the same name already, the file will get processed by following
the file policy you selected.
Setting up an address book_ 94
•
Change Name: The sent file is saved as a different file name that is
automatically generated.
• Cancel: Does not save the sent file.
• Overwrite: The sent file overwrites the existing file.
11. Select the Folder Creation option you want.
• Use Login Name: If you select this option the machine creates a
sub-folder in the file folder you selected. The sub-folder is named
using the user name entered in step 5.
If the file folder has a sub-folder with the same name already,
the machine does not create a sub-folder.
•
Folder Creation Cycle: You can set the cycle of sub-folder
creation. The machine create a sub-folder according to this option
set.
If the file folder has a sub-folder with the same name already,
the machine does not creates a sub-folder.
-
•
Every Day: A sub-folder is created every day. The sub-folder
name format is YYYY-MM-DD (e.g. 2012-01-01).
- Every Month: A sub-folder is created every month. The
sub-folder name format is YYYY-MM (e.g. 2012-01).
- Every Year: A sub-folder is created every year. The sub-folder
name format is YYYY (e.g. 2012).
Create Folder For Multiple Files: If you select this option and
scanned multiple files, the machine creates a sub-folder in the file
folder you selected, and the sent files will be stored in the sub-folder.
If all folder creation options are enabled at the same time, the sent
file(s) will be stored as shown below.
• When a single scanned file is sent:
\\folder\user name\2012-01-01\DOC.jpg
• When multiple scanned files are sent:
\\folder\user name\2012-01-01\DOCJPEG\DOC000.jpg
\\folder\user name\2012-01-01\DOCJPEG\DOC001.jpg
\\folder\user name\2012-01-01\DOCJPEG\DOC002.jpg
12. Press OK to save the information.
Editing Individual address
If you are not sure of the name, you can use the Input Address
area. Enter the first few letters or just press the
(search) icon.
The machine shows the individual list. Select the checkbox you
want include an individual address and press the
4.
Press the
icon.
icon to save the information.
Editing Group address
1. Press Machine Setup > Application Settings > Address Book from
the display screen.
2. Press the name of group you want to edit. Press the
(edit) icon.
If you want to delete an group address, select the checkbox you
want to delete and press the
(delete) icon.
3. Press the Group Name input area. Change the group name.
4. Press the Add Member. Select the checkbox for the individual address
to include and press the
icon.
If you are not sure of the name, you can use the Input Address
area. Enter the first few letters or just press the
(search) icon.
The machine shows the individual list. Select the checkbox you
want include an individual address and press the
icon.
5. If you want to delete an individual address, select the checkbox you
want to delete and press
(delete) icon. The name of the individual
will be deleted from the group.
6. Press the
icon to save the information.
Searching the Address Book for an entry
You can search the addresses that are currently stored in the address book.
1. Press Machine Setup > Application Setting > Address Book >
upper’s left button from the display screen.
2. Press the specific category you want.
You can find addresses in a specific category such as All, Individual,
Group, Favorite, or Email.
1. Press Machine Setup > Application Setting > Address Book from the
display screen.
2. Press the name of the individual you want to edit. Press the
icon.
(edit)
If you want to delete an individual address, select the checkbox for
the address you want to delete and press the
(delete) icon.
3. Press the input area you want to change. Then change the contents
using the pop-up keyboard, or numeric keypad on the control panel. If
you use the pop-up keyboard.
4. Press the
icon to save the information.
Storing Group address
1. Press Machine Setup > Application Settings > Address Book >
(new) icon >
(group) icon from the display screen.
icon.
If you are not sure of the name, you can use the Input Address
area. Enter the first few letters or just press the
2. Press the Group Name input area. Then enter the group name.
3. Press the Add Member. Select the checkbox for the individual address
to include and press the
3. The machine shows the search results.
(search) icon.
Deleting an entry in an Address Book
You can delete the selected address currently stored in an address book.
Setting up an address book_ 95
1. Press Machine Setup > Application Setting > Address Book from the
display screen.
2. Select the address’s checkbox you want to delete and press the
(delete) icon.
3. Press the
icon when the confirmation window appears.
The selected address will be deleted from the list.
12. Check the enable SMB box in SMB. You can enter the SMB
information after checking this checkbox.
13. Enter the server address in decimal notation or a host name in SMB
Server Address.
14. Enter the server port number in SMB Server Port.
15. Enter the login name in Login Name.
In case of SMB or FTP, if you want the server to permit access
for unauthorized persons. Press the Anonymous box. This
box is unchecked by default. If you checked the Anonymous
box, go to step 18.
Checking Address Book for an entry
You can see an individual’s or group’s address information.
1. Press Machine Setup > Application Setting > Address Book from the
display screen.
2. Press the address you want to see.
The display screen shows all the information for the address.
You can edit the address directly pressing
(edit) icon in the
detail’s screen, or if you select a group address, you can also see
the individual addresses in the group address.
Setting up an address book using SyncThru™
Web Service
You can store addresses conveniently from a networked computer using
SyncThru™ Web Service. Only users registered in the machine can store
addresses through login SyncThru™ Web Service.
Storing on your local machine
This method means that you store addresses on your machine’s hard drive.
You can add addresses, as well as group them in particular categories.
16. Enter the password in Password, and re-enter the password in
Confirm Password.
17. Enter the domain name in Domain.
If the SMB server you entered is not registered on any domain,
leave it blank or enter the computer name of the SMB server.
18. Enter the scan file folder for storing scanned images in Path.
Example: /sharedFolder/
19. Select the Scan folder creating policy option you want.
• Create new folder using login name: If you select this option,
the machine creates a sub-folder in the file folder you selected.
The sub-folder is named using the user name you entered in step
15.
If the file folder has a sub-folder with the same name
already, the machine does not create a sub-folder.
•
Create new folder every: You can set the cycle of sub-folder
creation. The machine creates a sub-folder according to this
option set.
Adding addresses in Individual Address Book
If the file folder has a sub-folder with the same name
already, the machine does not create a sub-folder.
1. Turn your networked computer on and open the web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access the SyncThru™ Web Service
shows.
If necessary, you can change the language in the upper corner
of SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain you log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
7. Click AddressBook.
8. Click Add.
9. Enter the name to be added, and select the speed dial number in
General.
•
Speed Dial Number is the number representing a
recipient’s information, you can use the numeric keypad on
the control panel.
• Check Favorite for addresses you often use. You can
easily find them from the search results.
10. Enter the email address in E-mail.
11. Enter the fax number in Fax.
-
•
Day: A sub-folder is created every day. The sub-folder name
format is YYYY-MM-DD (e.g. 2012-01-01).
- Month: A sub-folder is created every month. The sub-folder
name format is YYYY-MM (e.g. 2012-01).
- Year: A sub-folder is created every year. The sub-folder
name format is YYYY (e.g. 2012).
Create new folder only if scan output consist of several
files: If you select this option and scanned multiple files, the
machine creates a sub-folder in the file folder you selected, and
the sent files will be stored in the sub-folder.
If all folder creation options are enabled at the same time, the
sent file(s) will be stored as below.
• When single scanned file is sent:
\\folder\user name\2012-01-01\DOC.jpg
• When multiple scanned files are sent:
\\folder\user name\2012-01-01\DOCJPEG\DOC000.jpg
\\folder\user name\2012-01-01\DOCJPEG\DOC001.jpg
\\folder\user name\2012-01-01\DOCJPEG\DOC002.jpg
20. Select the policy for generating file name in Filing Policy. If the
server has a file with the same file name already, the file will get
processed by following the file policy you selected.
• Change Name: The sent file is saved as a different file name
that is automatically generated.
• Cancel: Does not save the sent file.
• Overwrite: The sent file overwrites the existing file.
Setting up an address book_ 96
21. Enter the file name in File Name, which is to be stored in the server.
22. Click Test to check the server’s information,.
23. Enter FTP server information almost same as you do for SMB.
24. Click Apply.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
Press Undo to delete the information you entered. If you press
Cancel, the Add window is closed.
Editing addresses in an Individual Address Book
7. Click Address Book.
You can change the arrangement by clicking each column
header. For example, clicking Speed No., you can see the
addresses in the order of speed dial number. If you click
Speed No. again, you can see them in the reversed order.
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access SyncThru™ Web Service.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
8. Enter the name for which you want to search in the search input
area.
You can find addresses in a specific category such as Fax
Number, E-mail, SMB, etc.
For example, if you want to find the fax number, click drop
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
down list next to the
9. Click the
and select Fax Number.
. Then the search result appears.
You can see the addresses in a specific category such as Fax
Number, E-mail, SMB, etc.
For example, if you want to see the addresses which are
included fax number, click drop down list below LDAP and
select Fax Number.
7. Click Address Book.
8. Check an address you want to edit and press Edit.
9. Change the address information.
10. Click Apply.
Press Undo to delete the information you entered. If you press
Cancel, the Edit window is closed.
Deleting addresses in an Individual Address Book
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access SyncThru™ Web Service.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
it automatically gets logged out.
7. Click Address Book.
8. Check an address you want to delete and click Delete.
If you select the column headers’ checkbox, all addresses are
checked.
Click OK when the confirmation window appears.
Searching addresses in an Individual Address Book
1. Turn your networked computer on and open the web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access SyncThru™ Web Service.
Importing an Individual Address Book
You can import an address book file from a server or computer. The file
should have the file extension ‘csv’. Also you can import addresses from
a LDAP server. Before importing the addresses to your machine, an
LDAP server administrator should store the addresses.
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access the SyncThru™ Web Service
shows.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
7. Click Address Book.
8. Select Import.
9. Select URL or Desktop, and enter the address or folder name where
the file is stored.
10. Click OK.
Exporting an Individual Address Book
You can export an address book file to your computer for backup of the
file or to another Samsung machine.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
Setting up an address book_ 97
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
7. Click AddressBook.
8. Select Export.
9. Click Export. Then the address book file is stored in your computer.
Grouping addresses in Groups Address Book
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access SyncThru™ Web Service.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
7. Click AddressBook.
8. Click Groups.
9. Click Add Group.
10. Enter the group name to be added in Group Name.
11. Check Add individual(s) after this group is created.
7. Click AddressBook.
8. Click Groups.
9. Check the group address you want to edit and press Edit Group.
10. Change the group address information.
11. Click Apply.
Press Undo to delete the information you entered. If you press
Cancel, the Edit window closes.
Deleting Group addresses in a Groups Address Book
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access SyncThru™ Web Service.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
7. Click AddressBook.
8. Click Groups.
9. Check the group addresses you want to delete.
10. Click Delete Group.
Click OK when the confirmation window appears.
Checking Group Addresses
If you do not want to add individual addresses to the group
address you made, skip this step. You can add individual
addresses next time by pressing Group Details.
12. Click Apply.
13. Check the addresses you want to add to Group Address Book from
Individual Address Book.
14. Click the arrow in the middle. The selected addresses are added to
Group Address Book.
15. Click Apply.
Editing Group addresses in Groups Address Book
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access the SyncThru™ Web Service
shows.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
You can see information for group addresses. You can also add or
delete individual addresses in the Group Details window.
1. Turn your networked computer on and open a web browser.
2. Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3. Press Enter or click Go to access SyncThru™ Web Service.
If necessary, you can change the language in the upper right
corner of the SyncThru™ Web Service.
4. Click Login.
5. Enter the ID and password, and select a domain to log into the
machine.
6. Click Login.
If you do not use the SyncThru™ Web Service for five minutes,
you will be automatically logged out.
7. Click AddressBook.
8. Click Groups.
9. Press the group address you want to see. Press Group Details.
Setting up an address book_ 98
•
•
You can add individual addresses directly. Check the
addresses you want to add to Group Address Book from
Individual Address Book.
You can delete individual addresses directly. Check the
addresses you want to delete and press Delete in Group
Address Book.
Setting up an address book_ 99
Printing
8.
This chapter explains common printing tasks.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
•
•
•
Printer driver features
Basic printing
Opening printing preferences
Using help
Setting Device Options
Using special print features
Using direct printing utility
Changing the default print settings
Setting your machine as a default machine
Printing to a file (PRN)
MAC printing
Linux printing
UNIX Printing
The procedures in this chapter are mainly based on Windows XP.
Feature
Printer driver features
Windows
Your printer drivers support the following standard features:
• Paper orientation, size, source, and media type selection
• Number of copies
You can also use various special printing features. The following table
shows a general overview of features supported by your printer drivers:
Watermark
Overlay
Double-sided printing
(duplex)
Some models or operating systems may not support all feature(s)
shown in the following table.
Feature
PCL/PSa/X
PS
PCL/PSa/X
PS
Windows
MAC
Linux
Unix
Machine quality
option
●
●
●
●
Poster printing
●
Multiple pages per
sheet
●
●
●
●
Booklet printing
●
●
●
●
Fit to page printing
●
●
Reduce and enlarge
printing
●
●
Different source for
first page
●
●
Cover page options
●
●
●
●
Raster compression
●
(PCL only)
●
●
●
Output options
●
●
●
●
Linux
Unix
●
●
●
●
●
(PCL only)
●
(●: Supported, Blank: Not supported)
●
MAC
a. The PostScript driver is recommended for best print quality from
PostScript-based applications such as Acrobat Reader®, Adobe
Illustrator®, Adobe Photoshop®, etc.
PS
Finishing options
PS
Printing_ 100
Basic printing
4. Click Properties or Preferences.
• MAC printing (see "MAC printing" on page 110).
• Linux printing (see "Linux printing" on page 113).
• UNIX printing (see "UNIX Printing" on page 114).
The following Printing Preferences window is for Notepad in Windows 7.
Your Printing Preferences window may differ, depending on your
operating system or the application you are using.
1. Open the document you want to print.
2. Select Print from the File menu.
3. Select your machine from the Select Printer list.
You can check the machine’s current status pressing the Printer
Status button .
Favorites tab
The basic print settings, including the number of copies and print range,
are selected within the Print window.
To take advantage of the printer features provided by your printer
driver, click Properties or Preferences in the application’s Print
window to change the print settings (see "Opening printing
preferences" on page 101).
4. To start the print job, click OK or Print in the Print window.
Canceling a print job
If the print job is waiting in the print queue or print spooler, cancel the job as
follows:
• You can access this window by simply double-clicking the machine icon
( ) in the Windows task bar.
•
You can also cancel the current job by pressing
control panel.
(Stop) on the
Opening printing preferences
When you select an option in Printing Preferences, you may see a
warning mark,
, or
. An exclamation mark (
) means you
can select that certain option, but it is not recommended, and (
mark means you cannot select that option due to the machine’s
settings or environment.
)
1. Open the document you want to print.
2. Select Print from the File menu.
3. Select your printer driver from the Select Printer list.
Printing_ 101
Basic tab
Paper tab
Use the Paper tab options to set the basic paper handling specifications.
Click the Paper tab to display the options shown below.
Orientation
This option allows you to select the direction in which information is
printed on a page.
Copies
Layout Options
This option allows you to select various ways to layout your document.
• Single Page Per Side: This option is a basic layout option. This
option allows you to print a page on one side of a sheet of paper.
• Multiple Pages Per Side: see "Printing multiple pages on one
sheet of paper" on page 106.
• Poster Printing: see "Printing posters" on page 107.
• Page Border: This option allows you to print your documents with
border lines. This option is not available for Poster Printing and
Booklet Printing.
This option allows you to choose the number of copies to be printed.
You can select 1 to 9999 copies.
Paper Options
•
•
Double-Sided Printing
This option allows you to print on both sides of a sheet of paper (see
"Printing on both sides of the paper" on page 107).
•
Finishing Options
•
This option allows you to specify the number of staples.
•
The Staple option is available only when the optional Inner
Finisher is installed.
•
Printing_ 102
Original Size: This option allows you to set the actual paper size of
the originals.
Output Size: This option allows you to scale your print job to any
selected paper size regardless of the original’s size (see "Fitting your
document to a selected paper size" on page 107).
- Percentage: This option allows you to change the size of a
page’s contents to appear larger or smaller on the printed page
by entering a percentage for reduction or enlargement (see
"Change the size of your document" on page 107).
Source: Make sure that Source is set to the corresponding paper
tray. Use MP Tray when printing on special materials, such as
envelopes and transparencies.
Type: This option allows you to set the type of paper to be loaded in
the tray. This will let you get the best quality printout. If not, the
desired print quality may not be achieved.
Special Pages: This option is allows you to make special pages
such as covers. You can add, delete, or update the special page
settings to the list.
Graphics tab
•
For the PCL printer driver:
•
For the PS printer driver:
Use the Graphic tab options to adjust the print quality for your specific
printing needs.
If you click Reset, settings in the Advanced option return to the
default setting.
Finishing tab
Document Type
You can the document’s type. This option allows you to set the actual
type of the originals.
Color Mode
You can choose color options. Setting this option to Color typically
produces the best possible print quality for color documents. If you want
to print a color document in grayscale, select Grayscale.
To adjust color manually, click Advanced. Simply slide the color
balance slider in the Levels tab to adjust color, or click the Matching tab
for driver provided color correction for general image processing.
Click the question mark (
) in the upper-right corner of the window
and click on any option for more information.
•
•
If you click Reset, settings in the Levels or Matching return to
the default setting.
You can change the image which is in the Advanced option.
Click the Import Image button and select a different image.
Font/Text
Select Clear Text to print text darker than in a normal document.
Check All Text Black to print in solid black, regardless of the color it
appears on the screen.
•
Advanced
Click the question mark (
) in the upper-right corner of the window
and click on any option for more information.
Sort Options: This option allows you to sort out the printouts easily.
- None: Disables this option.
- Offset: When printing multiple copies, this option shifts the output
position of each set.
This feature is available only when the Inner Finisher is
installed.
Printing_ 103
-
•
•
•
•
•
Output options
Rotate: When printing multiple copies, the printouts are stacked
criss-crossed in sets.
•
This feature is available only when the standard or booklet
finisher is not installed.
This feature is available only with Letter- and A4-sized print
media.
Before using this feature, you have to load the paper in the
trays with SEF (Short edge feed) and LEF (Long edge
feed). For example, direction of paper feeding in the tray 1
is SEF, and direction of paper feeding in the tray 2 is LEF.
Staple Options: This option allows you to specify the number of
staples and the staple position. This option is available only when the
optional Inner Finisher is installed.
Output Tray Options: This option allows you to specify the tray where
to output the printed documents (see "Tray setting" on page 47”).
Advanced tab
•
•
•
Print Order: This options allows you to set the sequence in which
the pages will print. Print Odd Pages and Print Even Pages are
available only when you use the PCL printer driver.
Skip Blank Pages: This option allows you to specify not to print
blank pages in the original data.
Manual Margin: This option allows you to specify the binding
margin. Binding margin adjusts the binding position. This option is
not available when you use the PS printer driver.
PostScript Options: These options are available only when you
) in the
use the PS printer driver. Click the question mark (
upper-right corner of the window and click on any option you want to
know about.
If you click Reset, settings in the Advanced option return to the
default setting.
Security
Use the Advanced tab to set various printing options.
Encrypts printing data first, and transmits it to the machine. This feature
protects the print information even though the data is snatched on a
network. Job Encryption feature is enabled only when the hard drive is
installed. The hard drive is used to decrypt the print data.
Job Accounting
This option allows you to print with the given permission.
• User permission: If you check this option, only users with user
permission can start a print job.
• Group permission: If you check this option, only groups with group
permission can start a print job.
Watermark
see "Using watermarks" on page 108.
Overlay
see "Using overlay" on page 108.
Printing_ 104
•
Click the question mark (
) in the upper-right corner of the
window and click on any option for more information.
•
Administrators can enable job accounting and configure
permissions in the control panel or SyncThru™ Web Service.
For detailed information about them, refer to the
Administrator’s Guide.
Eco tab
Samsung tab
The Eco tab allows you to save print resources and lead you to eco-friendly
printing. When you select Eco Printing, you can see the eco image
(
)on some options. Also, Some options are not available in eco mode.
Use the Samsung tab to display the copyright and the version number of
the driver. If your computer is connected to the Internet, you can have
access to additional device services.
Print Mode
This option allows you to choose how to print or save the print file by using
the HDD in your machine. The default Print Mode is Normal which is for
printing without storing the printing file on the HDD. You can also use this
option in other tabs.
Eco Options
•
•
•
•
Printer Default: If you select this option, this feature is determined
by the setting you’ve made on the control panel of the machine.
None: Disables this option.
Eco Printing: Eco mode gets activated. Select Double-Sided
Printing, Layout, Color Mode, and Skip Blank Pages you want to
use in eco mode. As long as you do not change the options from the
other tabs, the document will be print out as set in the eco mode.
Password: If the administrator sets On-Forced in Default Eco
Mode for this machine, the eco mode is always set by this machine’s
eco setting, while the Eco Options in the printer driver is disabled. If
you need to change the print settings, click Password and enter the
password or contact your administrator.
•
•
•
•
Result Simulator
Result Simulator shows the result of reduced emission of carbon
dioxide, used electricity, and the amount of saved paper in accordance
with the settings you selected.
•
•
•
•
The results are calculated on the basis that the total number of
printed paper is one hundred without a blank page when eco
mode is disabled.
Refer to the calculation coefficient about CO2, energy, and
paper from IEA, the index of Ministry of Internal Affairs and
Communication of Japan and www.remanufacturing.org.uk.
Each model has a different index.
The power consumption in printing mode refers to the average
printing power consumption in this machine.
The actual saved or reduced amount may differ depending on
the operating system used, computing performance,
application software, connection method, media type, media
size, job complexity, etc.
Normal: This mode prints without storing your document.
Confidential: This mode is used for printing confidential documents.
You need to enter a password to print using it .
Store: This mode is used only for storing documents on the HDD. If
necessary, you can load and print the stored documents. You can find
the stored file in the Stored Document. First, choose a Stored
Document in Save Location and then set Options.
Store and Print: This mode is used when printing and storing
documents at the same time. If necessary, you can load and print the
stored documents. You can find the stored file in the Stored Document
. First, choose a Stored Document in Save Location and then set
Options.
•
•
•
•
Job Name: This option is used when you need to find a stored file
using the control panel.
User ID: This option is used when you need to find a stored file
using the control panel. The user name automatically appears as
the user name that you use to log on Windows.
Enter Password: If the Property of the Stored Document you
selected is Secured, you have to enter the password for the
Stored Document. This option is used for loading a stored file
using the control panel.
Confirm Password: Re-enter the password to confirm it.
Using a favorite setting
The Favoritesoption, which is visible on each preferences tab except for
Samsung tab, allows you to save the current preferences settings for future
use.
To save a Favorites item:
Printing_ 105
1. Change the settings as needed on each tab.
2. Enter a name for the item in the Favorites input box.
3. Click
•
. Then all current driver settings are saved. If you want to
update the setting you made, select more options and click
.
To use a saved setting, select it from the Favorites drop-down list. The
machine is now set to print according to the setting you selected.
To delete a saved setting, select it from the Favorites drop-down list
and click
EMF Spooling.
Advanced: Select one of the options. This option is available only
when you use the PS printer driver. Click the question mark (
) in
the upper-right corner of the window and click on any option you
want to know about.
If you click Reset, settings in the Advanced returns to the
default setting.
•
.
You can also restore the printer driver’s default settings by selecting
Default Favorites from the Favorites drop-down list.
•
Using help
Click the question mark in the upper-right corner of the window and click on
any option for more information. Then a pop-up window appears with
information about that option's feature which is provided from the driver.
If the question mark does not appear, select the option you want to know
about and press F1 on your keyboard.
If you want to search information via a keyword, click the Samsung tab in
the Printing Preferences window, and enter a keyword in the input line of
the Help option.
Font Substitution: Displays the font substitution table and options
for changing the TrueType-to-printer font mapping. This option is
available only when you use the PS printer driver.
Admin Job Accounting: Allows you to associate user and account
identification information with each document you print.
- User permission: If you check this option, only users with user
permission can start a print job.
- Group permission: If you check this option, only groups with
group permission can start a print job.
•
•
If you want to encrypt job accounting password, check Job
Accounting Password Encryption.
Administrators can enable job accounting and configure
permissions in the control panel or SyncThru™ Web
Service. For the detailed information about them, refer to
the Administrator’s Guide.
Setting Device Options
7. Click OK until you exit the Properties or Printer properties window.
When you install the optional devices such as optional dual cassette feeder,
Inner Finisher, etc, this machine automatically detects and sets the optional
devices. If you cannot use the optional devices you installed in this driver,
you can set the optional devices in Device Options. Job Accounting allows
you to print with the given permission.
1. Click the Windows Start menu.
2. For Windows 2000, select Settings > Printers.
• For Windows XP/2003, select Printers and Faxes.
• For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
• For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
• For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
3. Right-click your machine.
4. For Windows XP/2003/2008/Vista, press Properties.
• For the PS driver, select the PS driver and right-click to open
Properties.
For Windows 7 and Windows Server 2008 R2, from context menus,
select the Printer properties.
Using special print features
Special print features include:
• "Printing multiple pages on one sheet of paper" on page 106.
• "Printing posters" on page 107.
• "Printing on both sides of the paper" on page 107.
• "Change the size of your document" on page 107.
• "Fitting your document to a selected paper size" on page 107.
• "Using watermarks" on page 108.
• "Using overlay" on page 108.
Printing multiple pages on one sheet of paper
You can select the number of pages to print on a single sheet of paper. To
print more than one page per sheet, the pages will be reduced in size and
arranged in the order you specify. You can print up to 16 pages on one
sheet.
If Printer properties item has a ► mark, you can select other
printer drivers connected with the selected printer.
5. Select Device Options.
The Properties window may differ depending on the driver or
operating system you are using.
6. Select the appropriate option.
• Tray Options: Select the optional tray you installed. You can select
the Tray 3,4 (dual cassette feeder).
• Finisher Options: Select the optional finisher you installed.
• Administrator Settings: You can select the Printer Status and
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Basic tab, select Multiple Pages per Side in the Type
drop-down list.
3. Select Page Border to print a border around each page on the sheet.
4. Select the number of pages you want to print per sheet
(2, 4, 6, 9, or 16) in the Pages per Side drop-down list.
Printing_ 106
5. Select the page order from the Page Order drop-down list, if necessary.
6. Click the Paper tab, select the Original size, Source, and Type.
7. Click OK or Print until you exit the Print window.
•
Long Edge: This option is the conventional layout used in
bookbinding.
•
Short Edge: This option is the conventional layout used in
calendars.
Printing posters
This feature allows you to print a single-page document onto 4, 9, or 16
sheets of paper, for the purpose of pasting the sheets together to form one
poster-size document.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Basic tab, select Poster Printing in the Type drop-down list.
3. Select the page layout you want.
Specification of the page layout:
4. Select the Poster Overlap value. Specify Poster Overlap in millimeters
or inches by selecting the radio button on the upper right of Basic tab to
make it easier to paste the sheets together.
5. Click the Paper tab, select the Original size, Source, and Type.
6. Click OK or Print until you exit the Print window.
7. You can complete the poster by pasting the sheets together.
Printing on both sides of the paper
You can print on both sides of a paper; duplex. Before printing, decide how
you want your document oriented. You can only use this feature with Letter-,
Legal-, Oficio-, US Folio-, A4-, ISO B5-, JIS B5-, Statement-, Executive-,
A5-, 8K-, 16K-, Ledger- or JIS B4-sized paper.
Do not print on both sides of the special media, such as labels,
envelopes, or thick paper. It may cause a paper jam or damage the
machine.
•
Reverse Double-Sided Printing: Check this option to reverse the
print order when duplex printing.
4. Click the Paper tab, select the Original size, Source, and Type.
5. Click OK or Print until you exit the Print window.
Change the size of your document
You can change the size of a document to appear larger or smaller on the
printed page by typing in a percentage for reduction or enlargement.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Paper tab.
3. Select the actual paper size of the originals from the Original Size.
4. Enter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling rate.
You cannot use this feature when you select a size of paper from
the Output Size.
5. Select the Source and Type.
6. Click OK or Print until you exit the Print window.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Basic tab.
3. From the Double-Sided Printing section, select the binding option you
want.
• Printer Default: If you select this option, this feature is determined
by the setting you’ve made on the control panel of the machine. This
option is available only when you use the PCL printer driver.
• None: Disables this feature.
Fitting your document to a selected paper size
This printer feature allows you to scale your print job to any selected paper
size regardless of the document size. This option can be useful when you
want to check fine details on a small document.
Printing_ 107
Editing a watermark
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Paper tab.
3. Select actual paper size of the originals from the Original Size.
4. Select the size of paper to be printed in the tray from the Output Size.
5. Select the Source and Type.
6. Click OK or Print until you exit the Print window.
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Advanced tab, select Edit... from the Watermark
drop-down list.
3. Select the watermark you want to edit from the Current Watermarks
list and change the watermark message and options.
4. Click Update to save the changes.
5. Click OK or Print until you exit the Print window.
Using watermarks
The watermark option allows you to print text over an existing document.
For example, you use it when you want to have large gray letters reading
“DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all
pages of a document.
There are several predefined watermarks that come with the machine. They
can be modified, or you can add new ones to the list.
Deleting a watermark
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Advanced tab, select Edit... from the Watermark
drop-down list.
3. Select the watermark you want to delete from the Current
Watermarks list and click Delete.
4. Click OK or Print until you exit the Print window.
Using overlay
This option is available only when you use the PCL printer driver.
What is an overlay?
Using an existing watermark
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. Click the Advanced tab, and select the desired watermark from the
Watermark drop-down list. You will see the selected watermark in
the preview image.
3. Click OK or Print until you exit the print window.
An overlay is text and/or images stored on the computer’s hard drive
(HDD) as a special file format that can be printed on any document.
Overlays are often used to take the place of letterhead paper. Rather
than using a preprinted letterhead, you can create an overlay containing
exactly the same information that is currently on your letterhead. To print
a letter with your company’s letterhead, you do not need to load
preprinted letterhead paper in the machine: just print the letterhead
overlay on your document.
Creating a watermark
1. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
2. From the Advanced tab, select Edit... from the Watermark
drop-down list.
3. Enter a text message in the Watermark Message box. You can
enter up to 256 characters. The message displays in the preview
window.
When the First Page Only box is checked, the watermark prints on
the first page only.
4. Select watermark options.
You can select the font name, style, color, size, and shade from the
Font Attributes section, as well as set the angle of the watermark
from the Message Angle section.
5. Click Add to add a new watermark to the Current Watermaks list.
6. When you finish editing, click OK or Print until you exit the Print
window.
To stop printing the watermark, select None from the Watermark
drop-down list.
Printing_ 108
Creating a new page overlay
To use a page overlay, you must create a new page overlay containing
your logo or image.
1. Create or open a document containing text or an image for use in a
new page overlay. Position the items exactly as you wish them to
appear when printed as an overlay.
2. To save the document as an overlay, access Printing Preferences
(see "Opening printing preferences" on page 101).
3. Click the Advanced tab, and select Edit... from the Text drop-down
list.
4. In the Edit Overlay window, click Create.
5. In the Save As window, type a name (up to eight characters) in the
File name box. Select the destination path, if necessary (the default
is C:\Formover).
6. Click Save. The name appears on the Overlay List.
7. Click OK or Print until you exit the Print window.
8. The file is not printed. Instead, it is stored on your computer’s hard
disk drive.
Using direct printing utility
The overlay document size must be the same as the document
you print with the overlay. Do not create an overlay with a
watermark.
This chapter explains how to use the Direct Printing Utility to print PDF files
without open the files.
Using a page overlay
After an overlay has been created, it is ready to be printed with your
document. To print an overlay with a document:
1. Create or open the document you want to print.
2. To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on
page 101).
3. Click the Advanced tab.
4. Select the desired overlay from the Text drop-down list.
5. If the overlay file you want does not appear in theText drop-down
list, select Edit... from the list and click Load. Select the overlay file
you want to use.
If you have stored the overlay file you want to use in an external
source, you can also load the file when you access the Load
window.
After you select the file, click Open. The file appears in the Overlay
List box and is available for printing. Select the overlay from the
Overlay List box.
6. If necessary, check the Confirm Page Overlay When Printing box.
If this box is checked, a message window appears each time you
submit a document for printing, asking you to confirm printing an
overlay on your document.
If this box is not checked and an overlay has been selected, the
overlay automatically prints with your document.
7. Click OK or Print until you exit the Print window.
The selected overlay prints on your document.
•
•
•
•
•
A HDD should be installed on your machine, to print PDF files
using this program.
You cannot print PDF files that are restricted to print. Deactivate
the printing restriction feature, and retry printing.
You cannot print PDF files that are restricted by a password.
Deactivate the password feature, and retry printing.
Whether or not a PDF file can be printed using the Direct Printing
Utility program depends on how the PDF file was created.
The Direct Printing Utility program supports the PDF version
1.7 and below. For a higher version, you must open the file to print
it.
What is Direct Printing Utility?
Direct Printing Utility is a program that sends a PDF file directly to your
machine to print without having to open the file. It sends data through the
Windows spooler using the port of the printer driver. It only supports PDF
format.
To install this program, select Advanced Installation -> Custom
Installation and put a check mark for this program when you install the
printer driver.
Printing
There are several ways you can print using the Direct Printing Utility.
The resolution of the overlay document must be the same as that
of the document you will print with the overlay.
From the Direct Printing Utility window
1. From the Start menu select Programs or All Programs > Samsung
Printers > Direct Printing Utility > Direct Printing Utility.
Deleting a page overlay
You can delete page overlays that you no longer use.
1. In the Printing Preferences window, click the Advanced tab.
2. Select Edit... in the Text drop down list.
3. Select the overlay you want to delete from the Overlay List box.
4. Click Delete.
5. When a confirmation message window appears, click Yes.
6. Click OK or Print until you exit the Print window.
2. Select your machine from the Select Printer drop-down list and click
Browse.
3. Select the PDF file you wish to print and click Open.
The PDF file is added in the Select Files section.
4. Customize the machine settings for your needs.
5. Click Print. The selected PDF file is sent to the machine.
Printing_ 109
Using the right-click menu
Printing to a file (PRN)
1. Right-click on the PDF file you wish to print and select Direct Printing.
The Direct Printing Utility window appears with the PDF file added.
2. Select the machine you wish to use.
3. Customize the machine settings for your needs.
4. Click Print. The selected PDF file is sent to the machine.
You will sometimes need to save the print data as a file.
To create a file:
1. Check the Print to file box at the Print window.
Changing the default print settings
Most Windows applications will override settings you specify in the
printer driver. Change all print settings available in the software
application first, and change any remaining settings using the printer
driver.
1. Click the Windows Start menu.
2. For Windows 2000, select Settings > Printers.
• For Windows XP/2003, select Printers and Faxes.
• For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
• For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
• For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
3. Right-click your machine.
4. For Windows 2000, XP, 2003, and Vista, press Printing Preferences.
For Windows 7 and Windows Server 2008 R2, from context menus,
select the Printing Preferences.
If Printing Preferences item has ► mark, you can select other
printer drivers connected with selected printer.
2. Click Print.
3. Type in the destination path and the file name, and then click OK.
For example c:\Temp\file name.
If you type in only the file name, the file is automatically saved in
My Documents, Documents and Settings or Users. The saved
folder may differ, depending on your operating system or the
application you are using.
MAC printing
Some features may not be available depending on models or options.
5. Change the settings on each tab.
6. Click OK.
This section explains how to print using a MAC.
Printing a document
If you want to change the settings for each print job, change it in
Printing Preferences.
Setting your machine as a default machine
1. Click the Windows Start menu.
2. For Windows 2000, select Settings > Printers.
• For Windows XP/2003, select Printers and Faxes.
• For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
• For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
• For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
3. Select your machine.
4. Right-click your machine and select Set as Default Printer.
When you print with a MAC, you need to check the printer driver setting in
each application you use. Follow the steps below to print from a MAC:
1. Open the document you want to print.
2. Open the File menu and click Page Setup (Document Setup in some
applications).
3. Choose your paper size, orientation, scaling, other options, and make
sure that your machine is selected. Click OK.
For Windows 7 and Windows Server 2008 R2, if Set as default
printer item has ► mark, you can select other printer drivers
connected with the selected printer.
4. Open the File menu and click Print.
5. Choose the number of copies you want and indicate which pages you
want to print.
6. Click Print.
Printing_ 110
Activating optional devices or accessories
•
After installing the optional devices or accessories, you need to activate the
options.
1. Open System Preferences and click Print & Fax.
2. Select your machine and click Options & Supplies....
3. Select Driver and set the necessary options.
Changing printer settings
You can use advanced printing features provided by your machine.
Open an application and select Print from the File menu. The machine
name, which appears in the printer properties window, will differ depending
on the machine in use. Except for the name, the composition of the printer
properties window is similar to the following.
•
•
•
Layout Direction: This option allows you to select the printing
direction on a page similar to the examples in the UI.
Border: This option allows you to print a border around each page
on the sheet.
Two-Sided: This option allows you to print on both sides of a sheet
of paper (see "Printing on both sides of paper" on page 113).
Reverse Page Orientation: This option allows you to rotate the
paper 180 degrees.
Graphics
The Graphics tab provides options for selecting Quality. Select
Graphics from the drop-down list.
•
The setting options may differ depending on printers and Mac OS
X version.
• The following panes may differ, depending on your operating
system or the application you are using.
The following pane is the first pane you will see when you open the printer
properties pane. Select other advanced features from the drop down list.
•
•
Quality: This option allows you to select the printing resolution. The
higher the setting, the sharper the clarity of printed characters and
graphics. A higher setting also may increase the time it takes to print
a document.
Color Mode: You can set the color options. Setting to Color
typically produces the best possible print quality for color documents.
If you want to print a color document in grayscale, select Grayscale.
Job Accounting
Layout
This option allows you to print with the given permissions.
The Layout tab provides options to adjust how the document appears
on the printed page. You can print multiple pages on one sheet of paper.
Select Layout from the drop-down list.
•
•
Pages per Sheet: This option determines how many pages are to
be printed on one page (see "Printing multiple pages on one sheet of
paper" on page 113).
Printing_ 111
•
Accounting Type: You can select an accounting type specified by
your system administrator.
- Accounting: You can enable print authentication by user ID and
password.
- ID Only: You can enable print authentication by user ID only.
User permission: If you check this option, only users with user
•
permission can start a print job.
Group permission: If you check this option, only groups with group
permission can start a print job.
•
If you want to encrypt a job accounting password, refer to help
( ) in the bottom left corner of the printer properties pane.
•
Administrators can enable job accounting and configure
permissions in the control panel or SyncThru™ Web Service.
For the detailed information about them, refer to the
Administrator’s Guide.
Printer Features
Job Setting
This option allows you to choose how to print the file by using the hard
disk drive in your machine.This option allows you to choose how to print
or save the file by using the HDD in your machine.
•
•
•
•
•
•
Print Mode: The default Print Mode is Normal.
- Normal: This mode prints without storing your document.
- Confidential: This mode is used for printing confidential
documents. You need to enter a password to print it.
- Store: This mode is used only for storing documents on the
HDD. If necessary, you can load and print the stored documents.
You can find the stored file in the Stored Document (see
"Saving documents in the Stored Document" on page 93).
- Store and Print: This mode is used when printing and storing
documents at the same time. If necessary, you can load and print
the stored documents. You can find the stored file in the Stored
Document (see "Saving documents in the Stored Document" on
page 93).
- Print Schedule: Use this option to enter a specific time to print
the job. This is useful for printing large amount of data or if you
want all your job to print at the same time. Select the date and
time you want to print. User ID and Job Name are used when
you need to find a stored document using the control panel.
•
•
•
Print At: Select the date and time you want to print.
User ID: This option is used when you need to find a stored
file using the control panel. The user name automatically
appears as the user name that you use to log into Mac OS X.
Job Name: This option is used when you need to find a stored
file using the control panel.
Printing_ 112
•
•
•
Finishing: You can select the print output options such as staple,
offset and etc. This option is available only when the optional Inner
Finisher or booklet finisher is installed.
Booklet Printing: This feature prints your document on both sides
of a paper and arranges the pages so that the paper can be folded in
half after printing to produce a booklet. Some options in Booklet
Printing are available only when the optional stanard finisher or
booklet finisher is installed.
Front Cover: Prints the document with a front cover. The front
cover can be a blank paper or the first page in the document.
Back Cover: Prints the document with a back cover. The back
cover can be a blank paper or the last page in the document.
Front and Back Cover: Prints the document with a front cover and
a back cover. The covers can be blank papers or the first and the last
pages in the document.
Paper Type: This option allows you to correspond to the paper
loaded in the tray from which you want to print. This will let you get
the best quality printout. If you load a different type of print material,
select the corresponding paper type.
Edge Enhancement: This option allows you to emphasize edges of
texts and fine lines for improving readability.
RGB Color Simulator: This setting determines how colors are
rendered. Standard is the most widely used setting which the color
tone of this mode is the closest to that of standard monitor (sRGB
Monitor). Vivid mode is appropriate for printing presentation data
and charts. The color tone of Vivid mode produces more Vivid color
images than that of Standard mode. Device mode is best used for
printing fine lines, small characters and color drawings. The color
tone of Device mode may be different from that of monitor, the pure
toner colors are used for printing cyan, magenta and yellow colors.
Corporate Imaging is most common color setting used in the
corporate environment.
Linux printing
Printing multiple pages on one sheet of paper
You can print more than one page on a single sheet of paper. This feature
provides a cost-effective way to print draft pages.
1. Open an application, and select Print from the File menu.
2. Select Layout from the drop-down list under Orientation. In the Pages
per Sheet drop-down list, select the number of pages you want to print
on one sheet of paper.
Some features may not be available depending on models or options.
Printing from applications
There are a lot of Linux applications that allow you to print using Common
UNIX Printing System (CUPS). You can print on your machine from any
such application.
1. Open an application, and select Print from the File menu
2. Select Print directly using LPR.
3. In the LPR GUI window, select the model name of your machine from
the printer list and click Properties.
3. Select the other options you want to use.
4. Click Print, then machine prints the selected number of pages you want
to print on one sheet of paper.
Printing on both sides of paper
You can print on both sides of the paper. Before printing in the duplex mode,
decide on which edge you will be binding your finished document. The
binding options are as follows:
• Long-Edge Binding: This option is the conventional layout used in
book binding.
• Short-Edge Binding: This option is the type often used with calendars.
1. From your MAC application, select Print from the File menu.
2. Select Layout from the drop-down list under Orientation.
3. Select a binding orientation from Two-Sided option.
4. Select the other options you want to use.
5. Click Print and; the machine prints on both sides of the paper.
4. Change the print job properties using the following four tabs displayed at
the top of the window.
•
•
If you print more than 2 copies, the first copy and the second copy
might print on the same sheet of paper. Avoid printing on both sides of
paper when you are printing more than 1 copy.
Printing_ 113
•
General: This option allows you to change the paper size, the paper
type, and the orientation of the documents. It enables the duplex
feature, adds start and changes the number of pages per sheet.
Text: This option allows you to specify the page margins and set the
text options, such as spacing or columns.
Graphics: This option allows you to set image options that are used
when printing image files, such as color options, image size, or
image position.
•
Advanced: This option allows you to set the print resolution, paper
source, and destination.
5. Click Apply to apply the changes and close the Properties window.
6. Click OK in the LPR GUI window to start printing.
7. The Printing window appears, allowing you to monitor the status of your
print job.
To abort the current job, click Cancel.
•
Classes: This option shows the class of your machine. Click Add to
Class to add your machine to a specific class or click Remove from
Class to remove the machine from the selected class.
4. Click OK to apply the changes and close the Printer Properties
window.
UNIX Printing
Printing files
Some features may not be available depending on models or options.
You can print many different types of files on your machine using the
standard CUPS, directly from the command line interface. The CUPS LPR
utility allows you to do that, but the drivers package replaces the standard
LPR tool with a much more user-friendly LPR GUI program.
To print any document file:
1. Type lpr <file_name> from the Linux shell command line and press
Enter.
When you type only “LPR” and press Enter, the Select file(s) to print
window appears first. Just select any files you want to print and click
Open.
2. In the LPR GUI window, select your machine from the list, and change
the print job properties.
3. Click OK to start printing.
After installing the printer, choose any of the image, text, or PS files to print.
1. Execute “printui <file_name_to_print>” command.
For example, if you are printing “document1”
printui document1
This will open the UNIX Printer Driver Print Job Manager in which the
user can select various print options.
2. Select a printer that has been already added.
3. Select the printing options from the window such as Page Selection.
4. Select how many copies are needed in Number of Copies.
Configuring Printer Properties
5. Press OK to start the print job.
Using the Printer Properties window provided by the Printers
configuration, you can change the various properties for your machine as
a printer.
1. Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2. Select your machine from the available printers list and click Properties.
3. The Printer Properties window appears.
Proceeding the print job
To take advantage of the printer features provided by your printer
driver, press Properties.
Changing the machine settings
The UNIX printer driver Print Job Manager in which the user can select
various print options in printer Properties.
The following hot keys may also be used: “H” for Help, “O” for OK, “A” for
Apply, and “C” for Cancel.
General tab
•
•
•
•
•
The following five tabs display at the top of the window:
• General: This option allows you to change the printer location and
name. The name entered in this tab displays on the printer list in
Printers configuration.
• Connection: This option allows you to view or select another port. If
you change the machine port from USB to parallel or vice versa
while in use, you must re-configure the machine port in this tab.
• Driver: This option allows you to view or select another machine
driver. By clicking Options, you can set the default device options.
• Jobs: This option shows the list of print jobs. Click Cancel job to
cancel the selected job and select the Show completed jobs check
box to see previous jobs on the job list.
Printing_ 114
Paper Size: Set the paper size as A4, Letter, or other paper sizes,
according to your requirements.
Paper Type: Choose the type of the paper. Options available in the
list box are Printer Default, Plain, and Thick.
Paper Source: Select from which tray the paper is used. By default,
it is Auto Selection.
Orientation: Select the direction in which information is printed on a
page.
Duplex: Print on both sides of a sheet of paper to save paper.
Automatic/manual duplex printing may not be available
depending on models. You can alternatively use the lpr printing
system or other applications for odd-even printing.
•
•
Multiple pages: Print several pages on one side of a paper.
Page Border: Choose any of the border styles (e.g., Single-line
hairline, Double-line hairline)
Image tab
In this tab, you can change the brightness, resolution, or image position
of your document.
Text tab
Set the character margin, line space, or the columns of the actual print
output.
Margins tab
•
•
Use Margins: Set the margins for the document. By default,
margins are not enabled. The user can change the margin settings
by changing the values in the respective fields. Set by default, these
values depend on the page size selected.
Unit: Change the units to points, inches, or centimeters.
Printer-Specific Settings tab
Select various options in the JCL and General frames to customize
various settings. These options are specific to the printer and depend on
the PPD file.
Printing_ 115
Using a usb memory device
9.
This chapter explains how to use a USB memory device with your machine.
This chapter includes:
•
•
Understanding the USB screen
About USB memory device
•
•
Printing from a USB memory device
Managing USB memory
Understanding the USB screen
About USB memory device
To use the USB feature, press USB on the display screen.
USB memory devices are available with a variety of memory capacities to
give you more room for storing documents, presentations, music and
videos, high resolution photographs, or whatever other files you want to
store or move.
You can do the following on your machine using a USB memory device:
• Scan documents and save them on a USB memory device.
• Print data stored on a USB memory device.
• Format the USB memory device.
Your machine supports USB memory devices with FAT16/FAT32 and
sector size of 512 bytes.
Check your USB memory device’s file system from your dealer.
You must use only an authorized USB memory device with an A plug type
connector.
If you want to use this feature, you need to insert a USB memory
device into the USB memory port on your machine.
A
•
•
USB Display: Displays information of the folder or file.
: Moves back to the upper level.
•
: Makes a new folder in the USB memory device.
•
: Changes the name of the selected folder or file.
•
: Deletes the selected folder or file.
•
: Formats the USB memory device.
•
•
B
Use only a USB memory device with metal-shielded connector.
: You can directly print files stored on a USB memory device. You
can print TIFF, JPEG, PDF, and PRN files (see "Printing from a USB
memory device" on page 117).
: Sends to Scan to USB (see "Scanning to a USB memory device"
on page 81).
Only use a USB memory device that has obtained compatibility certification;
otherwise, the machine might not recognize it.
Using a USB memory device_ 116
Insert a USB memory device into the USB memory port on your machine.
Do not insert the USB memory device into other ports except the ports
shown in the image below. If you insert the USB memory into other
ports, the machine shows a warning message on the display screen.
Printing from a USB memory device
You can directly print files stored on a USB memory device. You can print
TIFF, JPEG, and PRN files. You can select 50 files and print selected the
files at once.
USB print option supported file types:
• PRN: Only files created by provided driver with your machine are
compatible. PRN files can be created by selecting the Print to file check
box when you print a document. The document will be saved as a PRN
file, rather than printed on paper. Only PRN files created in this fashion
can be printed directly from USB memory device (see "Printing to a file
(PRN)" on page 110).
• TIFF: TIFF 6.0 Baseline
• JPEG: JPEG Baseline
• PDF: PDF 1.7 and below
• XPS: .
In case of 8-bit CMYK JPEG files, the job could be cancelled.
To print a document from a USB memory device:
1. Insert a USB memory device into the USB memory port on your
machine.
Your machine automatically detects the device and reads data stored on
it (see "About USB memory device" on page 116).
•
•
•
Do not remove the USB memory device while it is in use. The
machine warranty does not cover damage caused by a user’s
misuse.
If your USB memory device has certain features, such as security
settings and password settings, your machine may not
automatically detect it. For details about these features, see the
USB memory device’s User’s Guide.
The machine cannot detect an unformatted USB memory
device. Format, and then reinsert the USB memory device into
the USB memory port on your machine.
• The machine can not detect the USB memory device when the
machine is in power save mode. Wait until the machine returns
to ready mode, and then reinsert the USB memory device into
the USB memory port on your machine.
• The machine has two USB memory ports. When a USB
memory device is already inserted in one of the port, if you try
to insert a USB memory device in another ports, the machine
cannot detect second one. Remove the USB memory device
that was inserted first and then reinsert the USB memory
device you want to insert into the USB memory port on your
machine.
2. Press USB from the display screen.
3. The machine shows all the files in the USB memory device.
Select the file you want to print. You can also select multiple files if you
want to print multiple files.
•
If the file is in a folder, press the folder name. Then press
Select.
Using a USB memory device_ 117
•
If the PDF file you selected is secured with a password, you
have to know the password for printing. Enter the password
when the machine requires the secure password. If you do not
know the password, the print job will be cancelled.
4. Press Print.
5. Press the appropriate option.
• Copies: Selects the number of copies.
• Color Mode: Selects the color mode of copies.
• Duplex: Selects the machine to print copies on both sides of the
paper.
• Auto fit: Allows you to scale your print job to the selected paper size
in the tray regardless of the document size. Select a tray, and press
On.
• Paper Source: Selects a tray that contains the paper to be printed.
• Output: Sets the machine’s various output options such as copy
output option (see "Deciding the form of copy output" on page 53).
6. Press Start button to print the file.
7. Press
to go back to the previous screen.
8. After printing is completed, you can remove the USB memory device
from the machine. Press USB.
Managing USB memory
You can delete image files stored on a USB memory device one-by-one or
all at once by reformatting the device.
After deleting files or reformatting a USB memory device, files cannot
be restored. Confirm that you no longer need the data before deleting
it.
Formatting a USB memory device
1. Insert a USB memory device into the USB memory port on your
machine.
2. Press USB from the display screen.
3. Press Format.
4. Press OK when the confirmation window appears.
Deleting an image file
1. Insert a USB memory device into the USB memory port on your
machine.
2. Press USB from the display screen.
3. The machine shows all files in the USB memory device.
Press the file you want to delete.
If the file is in a folder, press the folder name. Then press Select.
4. Press Delete.
5. Press OK when the confirmation window appears.
Using a USB memory device_ 118
management tools
10.
This chapter introduces management tools provided to help you make full use of your machine.
This chapter includes:
•
•
•
•
•
•
•
Easy Capture Manager
Samsung AnyWeb Print
Easy Eco Driver
Using Samsung Easy Printer Manager
Easy Capture Manager
Available for Windows OS users only.
Capture your screen and launch Easy Capture Manager by simply pressing
the Print Screen key. Now you can easily print your captured screen as
captured or edited.
Samsung AnyWeb Print
Available for Windows and Mac OS X users only.
This tool helps you screen-capture, preview, scrap, and print Windows
Internet Explorer pages more easily, than when you use an ordinary
program. Click Start > All programs > Samsung Printers > Samsung
AnyWeb Print > Download the latest version to link to the website where
the tool is available for download.
Using Samsung Printer Status
Using Samsung Easy Document Creator
Using the Linux Unified Driver Configurator
and launching. All of these features provide a gateway to conveniently use
your Samsung machine. Samsung Easy Printer Manager provides two
different user interfaces for the user to choose from: the basic user interface
and the advanced user interface. Switching between the two interfaces is
easy: just click a button.
Understanding Samsung Easy Printer Manager
To open the program:
For Windows,
Select Start > Programs or All Programs > Samsung Printers >
Samsung Easy Printer Manager > Samsung Easy Printer Manager.
For MAC,
Open the Applications folder > Samsung folder > Samsung Easy Printer
Manager.
The Samsung Easy Printer Manager interface is comprised of various basic
sections as described in the table that follows:
The screenshot may differ depending on operating system you are
using.
Easy Eco Driver
Available for Windows OS users only.
With the Easy Eco Driver, you can apply Eco features to save paper and
toner before printing. To use this application, Start Easy Eco Driver before
printing job checkbox in the printer properties should be checked.
Easy Eco Driver also allows you simple editing such as removing images
and texts, changing fonts, and more. You can save frequently used settings
as a preset.
How to use:
1. Open a document to print.
2. Print the document.
3. Select the options you want to apply to the document.
You can see the preview of the applied features.
4. Click Print.
Using Samsung Easy Printer Manager
•
This feature may not be available depending on model or optional
goods.
• Available for Windows and Mac OS X users only.
• Microsoft Internet Explorer 6.0 or higher is the minimum
requirement for Samsung Easy Printer Manager.
Samsung Easy Printer Manager is an application that combines Samsung
machine settings into one location. Samsung Easy Printer Manager
combines device settings as well as printing environments, settings/actions,
Printer list
1
Management tools_ 119
The Printer List displays printers installed on your
computer and network printers added by network
discovery (Windows only).
Printer
information
This area gives you general information about your
machine. You can check information, such as the
machine’s model name, IP address (or Port name),
and machine status.
You can view the online User’s Guide.
Troubleshooting button: This button
opens the Troubleshooting Guide when an
error occurs. You can directly open the
necessary section in the user’s guide.
2
Application
information
Includes links for changing to the advanced
settings, preference, help, and about.
The
button is used to change the user
interface to the advanced settings user
interface (see "Advanced settings user
interface overview" on page 120).
3
Quick links
4
Displays Quick links to machine specific functions.
This section also includes links to applications in
the advanced settings.
If you connect your machine to a network, the
SyncThru™ Web Service icon is enabled.
Contents area
5
6
Displays information about the selected machine,
remaining toner level, and paper. The information
will vary based on the machine selected. Some
machines do not have this feature.
Order supplies Click on the Order button from the supply ordering
window. You can order replacement toner
cartridge(s) from online.
Select the Help menu or click the
button from the window and click
on any option for more information.
Alert Settings (Windows only)
This menu includes settings related to error alerting.
• Printer Alert: Provides settings related to when alerts will be
received.
• Email Alert: Provides options relating to receiving alerts via email.
• Alert History: Provides a history of device and toner related alerts.
Job Accounting
Provides querying of quota information of the specified job accounting
user. This quota information can be created and applied to devices by
job accounting software such as SyncThru™ or CounThru™ admin
software.
Using Samsung Printer Status
The Samsung Printer Status is a program that monitors and informs you of
the machine status.
•
•
•
Samsung Printer Status overview
If an error occurs while operating, you can check the error from Samsung
Printer Status. Samsung Printer Status is installed automatically when you
install the machine software.
You can also launch Samsung Printer Status manually. Go to the Printing
Preferences, click the Basic tab > Printer Status button.
These icons appear on the Windows task bar:
Icon
Advanced settings user interface overview
The Samsung Printer Status window and its contents shown in this
user’s guide may differ depending on the machine or operating
system in use.
Check the operating system(s) that are compatible with your
machine (see "System requirements" on page 167).
Available for Windows OS users only.
The advanced user interface is intended to be used by the person
responsible for managing the network and machines.
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine.
Mean
Normal
The machine is in ready mode and
experiencing no errors or warnings.
Warning
The machine is in a state where an error
might occur in the future. For example, it
might be in toner low status, which may
lead to toner empty status.
Error
The machine has at least one error.
Device Settings
You can configure various machine settings such as machine setup,
paper, layout, emulation, network, and print information.
Scan to PC Settings
This menu includes settings to create or delete scan to PC profiles.
• Scan Activation: Determines whether or not scanning is enabled
on the device.
• Basic tab: Contains settings related general scan and device
settings.
• Image tab: Contains settings related to image altering.
Fax to PC Settings
This menu includes settings related to the basic fax functionality of the
selected device.
• Disable: If Disable is On, incoming faxes will not be received on
this device.
• Enable Fax Receiving from Device: Enables faxing on the device
and allows more options to be set.
Management tools_ 120
Description
Toner Level
You can view the level of toner remaining in each
toner cartridge. The machine and the number of
toner cartridge(s) shown in the above window
may differ depending on the machine in use.
Some machines do not have this feature.
Option
You can set printing job alert related settings.
Order Supplies
You can order replacement toner cartridge(s)
from online.
User’s Guide
You can view the online User’s Guide.
1
2
3
using.
This button opens the Troubleshooting
Guide when an error occurs. You can
directly open the troubleshooting section in
the user’s guide.
4
Close
5
Close the window.
Using Samsung Easy Document Creator
Samsung Easy Document Creator is an application to help users scan,
compile, and save documents in multiple formats, including .epub format.
These documents can be shared via social networking sites or fax. Whether
you’re a student needing to organize research from the library or a
stay-at-home mom sharing scanned pictures from last year’s birthday party,
Easy Document Creator will provide you with the necessary tools.
Click the information button to see the
program’s version information.
Availabe for Windows OS users only.
Windows XP or higher and Internet Explorer 6.0 or higher is the
minimum requirement for Samsung Easy Document Creator.
Samsung Easy Document Creator is installed automatically when
you install the machine software.
1
Click the Help ( ) button from the upper-right corner of the window
and click on any option you want to know about.
2
•
•
•
(Information)
Click the help button to get the information of
any option you want to use.
(Help)
Understanding Samsung Easy Document Creator
To open the program:
Select Start > Programs or All Programs > Samsung Printers >
Samsung Easy Document Creator > Samsung Easy Document Creator.
The Samsung Easy Document Creator interface is comprised of various
basic sections as described in the table that follows:
Quick Scan
Automatically scans with the settings
provided in Configuration. You can pre-set
the options such as image type, document
size, resolution, or file type (see "Quick
Scanning" on page 122).
Scan
Provides more in-depth options for scanning
documents on a one-by-one basis (see
"Scanning" on page 122).
Text Converting will only be available
after installing the optical character
recognition (OCR) software proivided in
a separate installation file.
The screenshot may differ depending on operating system you are
•
3
Management tools_ 121
•
Image Scanning: Use for scanning
single or mulitple pictures.
Document Scanning: Use for scanning
documents with text or text and images.
•
Text Converting: Use for scanning
documents that need to be saved in an
editable text format.
•
Book Scanning: Use for scanning
books with the flatbed scanner.
•
Favorites: User-created favorites for
frequently-used scan settings.
SNS Upload
4
Provides an easy and quick way to upload
files to a variety of social networking sites
(SNS). Scan an image directly or select an
existing image to upload to Facebook, Flickr,
Picasa, Google, or Twitter (see "Scanning to
a Social Networking Site" on page 122).
SNS Upload will only be available after
Microsoft™.NET Framework 3.5
Service Pack 1 has been installed
(http://www.microsoft.com/download/en
/details.aspx?id=22) and Windows XP
or higher and Internet Explorer 7.0 or
higher are required
E-Book
Conversion
5
Send Fax
6
Provides the ability to scan multiple
documents in as one e-book or convert
existing files into an e-book format (.epub
file) (see "Converting to an E-Book" on
page 122).
Provides the ability to directly fax a document
from Easy Document Creator if the Samsung
Network PC Fax driver is installed (see
"Sending a fax from your computer" on
page 65).
If the Samsung Network PC Fax driver
is not installed, this will be grayed out.
7
8
Configuration
Provides the options for a Common and
Quick Scan.
Device Name
Shows the scanning/faxing device ready to
use.
Search
If you cannot see any device ready to use,
click this button to find a device.
9
Quick Scanning
Configuring Quick Scan
To set up the Quick Scan options:
1. Click Configuration from the home screen.
2. Click on Default to use the default settings, or select your own
options.
3. Click Apply to save changes.
Using Quick Scan
1. Place a single document face down on the document glass, or load
the documents face up into the document feeder.
2. Click Quick Scan from the home screen.
3. Select a save location for the scanned images.
4. Click Save to save the image.
Click Scan More to scan another image with the same settings.
Scanning to a Social Networking Site
Scan Directly
1. Place a single document face down on the document glass, or load
the documents face up into the document feeder.
2. Click SNS Upload from the home screen.
3. Click Scan to SNS > Start.
4. Click Scan.
Upload Existing File
1.
2.
3.
4.
5.
Click SNS Upload from the home screen.
Click Existing File to SNS > Start.
Select the site and click Add Image to find the file to upload.
Select a social networking site to send the image and click Next.
Follow the instructions in each social networking site.
If there are some problems on accessing or uploading to each
SNS site due to a network environment issue, it's needed to check
security limitations established in your network with network
administrator. To guarantee correct functioning of SNS upload in
Samsung Easy Document Creator, unrestricted network
environment is needed for HTTPS communication.
Click Search Now to automatically
search for all devices to which you
have access.
Click the Help ( ) button from the upper-right corner of the window
and click on any option you want to know about.
Converting to an E-Book
Using features
Scan Directly
Scanning
1. Place a single document face down on the document glass, or load
the documents face up into the document feeder.
2. Click Scan from the home screen.
3. Select the type of scanning or a favorites then click Start.
4. Make adjustments to the image (Scan Settings and More Options).
5. Click Scan to scan a final image or Prescan to get another preview
image.
6. Select to Save to Location, Send to E-mail, or Send to SNS.
7. Click on Save (Saving a Scan), Send ( E-mailing a Scan), or Share (
Uploading).
If there is room on the document glass, more than one item can be
scanned at the same time. Use the
selection areas.
tool to make multiple
1. Place a single document face down on the document glass, or load
the documents face up into the document feeder.
2. Click E-Book Conversion from the home screen.
3. Click Scan to E-Book > Start.
4. Enter a name and author to be used as metatag information for the
.epub file, a file name, and select a save location.
5. Click Save.
Convert Existing Files
1.
2.
3.
4.
Click E-Book Conversion from the home screen.
Click Existing File to E-Book > Start.
Click Add Image to find the file to convert.
Enter a name and author to be used as metatag information for the
.epub file, a file name, and select a save location.
5. Click Save.
Management tools_ 122
Sending a Fax
Printers configuration
1. Place a single document face down on the document glass, or load
the documents face up into the document feeder.
2. Click Send Fax from the home screen.
3. Click add file and locate the file to fax.
4. Click Send Fax.
5. Enter the fax information (recipient’s number, cover page
information, etc).
6. Click Send.
Printers configuration has the two tabs: Printers and Classes.
Printers tab
View the current system’s printer configuration by clicking on the
machine icon button on the left side of the Unified Driver Configurator
window.
Plug-ins
Easy Document Creator will also create new plug-ins for Microsoft
PowerPoint, Word, and Excel. These new plug-ins will be in a new Easy
Document Creator menu on the applications’ menu bars: Scan to Office,
Send Fax, and E-Book.
Using the Linux Unified Driver Configurator
Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified
Driver Configurator. Refer to the Administrator’s Guide.
After the driver is installed on your Linux system, the Unified Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
1
Switches to Printers configuration.
2
Shows all of the installed machine.
3
Shows the status, model name and URI of your machine.
The printer control buttons are, as follows:
• Refresh: Renews the available machines list.
• Add Printer: Allows you to add a new machine.
• Remove Printer: Removes the selected machine.
• Set as Default: Sets the current selected machine as a default
machine.
• Stop/Start: Stops/starts the machine.
• Test: Allows you to print a test page to ensure the machine is
working properly.
• Properties: Allows you to view and change the printer properties.
1 Printers
Configuration
2 Scanners
Configuration
To use the on screen help, click Help.
3. After changing the configurations, click Exit to close the Unified Driver
Configurator.
Management tools_ 123
Classes tab
•
Properties: Allows you to change the scan properties and scan a
document.
The Classes tab shows a list of available machine classes.
Ports configuration
In this window, you can view the list of available ports, check the status of
each port, and release a port that is stalled in a busy state when its owner
has terminated the job for any reason.
1
Shows all of the machine classes.
2
Shows the status of the class and the number of machines in the
class.
•
•
•
Refresh: Renews the classes list.
Add Class: Allows you to add a new machine class.
Remove Class: Removes the selected machine class.
Scanners configuration
In this window, you can monitor the activity of scanner devices, view a list of
installed Samsung machine devices, change device properties, and scan
images.
•
•
1
Switches to Ports configuration.
2
Shows all of the available ports.
3
Shows the port type, device connected to the port, and status
Refresh: Renews the available ports list.
Release port: Releases the selected port.
Sharing Ports Between Printers and Scanners
Your machine may be connected to a host computer via a parallel port
or USB port. Since the machine contains more than one device (printer
and scanner), it is necessary to organize proper access of “consumer”
applications to these devices via the single I/O port.
The Unified Linux Driver package provides an appropriate port sharing
mechanism that is used by Samsung printer and scanner drivers. The
drivers talk to their devices via so-called machine ports. The current
status of any machine port can be viewed via the Ports configuration.
The port sharing prevents you from accessing one functional block of
the machine device, while another block is in use.
When you install a new machine onto your system, it is strongly
recommended you do this with the assistance of an Unified Driver
Configurator. In this case you will be asked to choose I/O port for the
new device. This choice will provide the most suitable configuration for
machine’s functionality. For machine scanners, I/O ports are being
chosen by scanner drivers automatically, so proper settings are applied
by default.
1
Switches to Scanners configuration.
2
Shows all of the installed scanners.
3
Shows the vendor, model name, and type of your scanner.
Management tools_ 124
Troubleshooting
11.
This chapter gives helpful information for what to do if you encounter an error.
This chapter includes:
•
•
•
•
•
•
•
•
•
•
Redistributing toner
Replacing the toner cartridge
Cleaning paper dust stick and chargers of imaging units
Replacing the imaging unit
Replacing the waste toner container
If you cannot solve problems using this chapter, contact your
administrator or service center. You can see the contact information
from Machine Setup > Others > Contact Information. This
information is configured by the machine’s administrator.
Clearing original document jams
Tips for avoiding paper jams
Clearing paper jams
Understanding display messages
Solving other problems
2. Pull the corresponding toner cartridge out from the machine.
CLX-92x1 / 93x1 Series
1
Redistributing toner
1
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs.
• Toner low related message appears on the display.
• The status LED blinks red.
If this happens, you can temporarily improve print quality by redistributing
the remaining toner in the cartridge. In some cases, white streaks or light
printing will still occur even after you have redistributed the toner.
Click this link to open an animation about redistributing toner.
2
2
3. Thoroughly shake the cartridge five or six times to distribute the toner
evenly inside the cartridge.
1. Open the front door.
CLX-92x1 / 93x1 Series
SCX-812x Series
SCX-812x Series
CLX-92x1 / 93x1 Series
SCX-812x Series
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
Toner particles can be released inside the machine but it does not
mean the machine is damaged. Contact a service representative
when print quality problems occur.
Troubleshooting_ 125
4. Hold the toner cartridge and align it with the corresponding slot inside
the machine. Insert it back into its slot until it locks in place.
CLX-92x1 / 93x1 Series
SCX-812x Series
Replacing the toner cartridge
The machine uses four colors and has a different toner cartridge for each
one: yellow(Y), magenta(M), cyan(C), and black(K).
When the toner cartridge is totally empty
• The status LED turns red on and the display screen shows the error
message of replacing toner.
• The machine stops printing and incoming faxes are saved in memory.
However, when the color toner cartridges are empty, but there is toner
left in the black toner cartridge, you can still print black-and-white print
jobs (the submitted job must be in black and white).
• Check the type of the toner cartridge for your machine (see "Supplies
and accessories" on page 160).
At this stage, the toner cartridge needs to be replaced.
Click this link to open an animation about replacing the toner cartridge.
1. Open the front door.
CLX-92x1 / 93x1 Series
SCX-812x Series
5. Close the front door. Ensure that the door is securely closed.
CLX-92x1 / 93x1 Series
SCX-812x Series
2. Pull the corresponding toner cartridge out from the machine.
CLX-92x1 / 93x1 Series
If the front door is not completely closed, the machine will not
operate.
SCX-812x Series
1
1
2
Troubleshooting_ 126
2
6. Hold the toner cartridge and align it with the corresponding slot inside
the machine. Insert it back into its slot until locks in place.
3. Remove the new toner cartridges from its bag.
CLX-92x1 / 93x1 Series
CLX-92x1 / 93x1 Series
SCX-812x Series
SCX-812x Series
4. Thoroughly roll the cartridge five or six times to distribute the toner
evenly inside the cartridge.
CLX-92x1 / 93x1 Series
SCX-812x Series
7. Close the front door. Ensure that the door is securely closed.
CLX-92x1 / 93x1 Series
SCX-812x Series
5. Carefully pull the sealing tape out of the toner cartridge..
CLX-92x1 / 93x1 Series
SCX-812x Series
If the front door is not completely closed, the machine will not
operate.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
Troubleshooting_ 127
Cleaning paper dust stick and chargers of
imaging units
4. Remove the paper dust.
The paper dust stick and the charger of imaging unit will need to be cleaned
after the specified number of pages is printed out. When the message that
tells you to clean the charger appears, you have to clean the paper dust
stick first, then clean the charger. The time when the message appears
depends on environmental factors like altitude, temperature, humidity, and
so on. You need to clean the paper dust stick and the charger to maintain
printing quality. If cleaning is done, the message will disappear
automatically.
Follow the cleaning procedure below.
1. Open the front door.
CLX-92x1 / 93x1 Series
5. Insert the paper dust stick back.
CLX-92x1 / 93x1 Series
SCX-812x Series
SCX-812x Series
6. Pull and push the corresponding charger cleaner completely as shown
below (SCX-812x Series only).
Do not pull the charger cleaner too hard to prevent it from
separating from the machine. It can cause damage to the
machine.
2. Hold the left/right locking levers and push inward at the same time. Then
remove the waste toner container.
CLX-92x1 / 93x1 Series
SCX-812x Series
SCX-812x Series
1
1
2
3. Pull the paper dust stick out.
CLX-92x1 / 93x1 Series
SCX-812x Series
Repeat step.6 five times.
Troubleshooting_ 128
Replacing the imaging unit
7. Insert the waste toner container until it locks in place.
CLX-92x1 / 93x1 Series
SCX-812x Series
The machine uses four colors and has a different imaging unit for each one:
yellow(Y), magenta(M), cyan(C), and black(K).
When the life of the imaging unit expires totally
• The status LED turns red on and the display screen shows the error
message for replacing imaging unit.
• Check the type of the imaging unit for your machine.(see "Supplies and
accessories" on page 160)
At this stage, the imaging unit needs to be replaced.
1. Open the front door.
CLX-92x1 / 93x1 Series
SCX-812x Series
8. Close the front door. Ensure that the door is securely closed.
CLX-92x1 / 93x1 Series
SCX-812x Series
2. Push the left/right locking levers and push inward at the same time as
shown below. Then remove the waste toner container.
CLX-92x1 / 93x1 Series
SCX-812x Series
If the message still appears, do the step.7 and step.8 again.
1
1
2
3. Pull the corresponding imaging unit out from the machine.
SCX-812x Series
CLX-92x1 / 93x1 Series
1
2
3
Troubleshooting_ 129
4. Remove the new imaging unit from its package.
8. Remove the tape on the imaging unit (SCX-812x Series only).
CLX-92x1 / 93x1 Series
SCX-812x Series
9. Remove the paper protecting the imaging unit.
Do not use sharp objects, such as a knife or scissors, to open the
imaging unit package. You could damage the surface of the
imaging unit.
CLX-92x1 / 93x1 Series
SCX-812x Series
5. Go to step.9 (CLX-92x1 Series only).
6. Pull out the protecting pad (SCX-812x Series only).
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
10. Hold the handles on the new imaging unit, and push the imaging unit
until it locks into place.
SCX-812x Series
CLX-92x1 / 93x1 Series
•
•
Be careful not to scratch the surface of the imaging unit.
To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with a piece of paper to
protect it if necessary.
7. Pull the rubber stopper out of the developer (SCX-812x Series only).
2
1
Troubleshooting_ 130
11. Take out the LSU window cleaning stick (CLX-92x1 Series only).
15. Close the front door. Ensure that the door is securely closed.
CLX-92x1 / 93x1 Series
12. Locate the LSU window cleaning hole and insert the LSU window
cleaning stick. Slowly push and pull the LSU window cleaning stick 4 or
5 times to clean the LSU window (CLX-92x1 Series only).
13. Insert the LSU window cleaning stick back into its place (CLX-92x1
Series only).
14. Insert the waste toner container until it locks in place.
CLX-92x1 / 93x1 Series
SCX-812x Series
Troubleshooting_ 131
SCX-812x Series
If the front door is not completely closed, the machine will not
operate.
Replacing the waste toner container
5. Close the front door. Ensure that the door is securely closed.
When the life of the waste toner container expires totally, the display screen
shows the error message of replacing waste toner container.
At this stage, the waste toner container needs to be replaced.
• Check the type of the waste toner container for your machine (see
"Supplies and accessories" on page 160).
1. Open the front door.
CLX-92x1 / 93x1 Series
CLX-92x1 / 93x1 Series
SCX-812x Series
SCX-812x Series
If the front door is not completely closed, the machine will not
operate.
2. Push the left/right locking levers and push outward as shown below.
Then remove the waste toner container.
CLX-92x1 / 93x1 Series
SCX-812x Series
1
1
2
3. Remove the new waste toner container from its package.
4. Insert the new waste toner container until it locks in place.
CLX-92x1 / 93x1 Series
SCX-812x Series
Troubleshooting_ 132
Clearing original document jams
3. Gently remove the jammed paper from the DADF.
When an original jams while passing through the duplex automatic
document feeder (DADF), a warning message appears on the display
screen.
To avoid tearing the document, remove the jammed document slowly
and gently.
To prevent document jams, use the scanner glass for thick, thin, or
mixed paper-type originals.
Original paper jam in front of scanner
1. Remove any remaining pages from the DADF.
2. Open the DADF cover.
4. Close the DADF cover.
Troubleshooting_ 133
Original paper jam inside of scanner
1. Remove any remaining pages from the DADF.
2. Open the DADF cover.
3. Gently remove the jammed paper from the DADF. If you can not grasp
the jammed paper, use lever as shown in the picture below.
If you do not see paper in this area, go to the next step.
Troubleshooting_ 134
4. Open the DADF input tray.
7. Open the DADF.
5. Pull the jammed paper gently out of the DADF.
If you do not see paper in this area, go to the next step.
6. Close DADF cover and DADF input tray.
Troubleshooting_ 135
8. Grasp the misfed paper, and remove the paper from the feed area by
carefully pulling it using both hands.
Tips for avoiding paper jams
By selecting the correct media types, most paper jams can be avoided.
When a paper jam occurs, refer to the next guidelines.
• Ensure that the adjustable guides are positioned correctly (see "Loading
paper in the tray" on page 39).
Do not overload the tray. Ensure that the paper level is below the paper
capacity mark on the inside of the tray.
• Do not remove paper from the tray while your machine is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
• Use only recommended print media (see "Tray setting" on page 47).
• Ensure that the recommended side of the print media is facing up in the
tray, or facing down in the multi-purpose tray.
If you do not see paper in this area, go to the next step.
9. Close the DADF.
Troubleshooting_ 136
Clearing paper jams
When a paper jam occurs, a warning message appears on the display
screen.
Close the right door.
If you do not see paper in this area, go to the next step.
3. Pull out tray 1 or 2.
To avoid tearing the paper, pull the jammed paper out slowly and
gently. Follow the instructions in the following sections to clear the
jam.
Paper jam in tray 1, 2
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
1. Open the right door.
1
4. Remove the jammed paper from the machine.
2
2. Remove the jammed paper by gently pulling it straight out.
5. Insert tray 1 or 2 back into the machine until it locks into place. Printing
automatically resumes.
Troubleshooting_ 137
Paper jam in tray 3, 4
3. Pull out tray 3 or 4.
Click this link to open an animation about clearing a jam.
1. Open the right bottom door of the dual cassette feeder.
4. Remove the jammed paper from the machine.
2. Remove the jammed paper by gently pulling it straight out.
Close the dual cassette feeder right bottom door.
If you do not see paper in this area, go to the next step.
5. Insert tray 3 or 4 back into the machine until it locks into place. Printing
automatically resumes.
Troubleshooting_ 138
Paper jam in the multi-purpose tray
Paper jam inside the machine (Jam feed 1, Jam feed
2)
Click this link to open an animation about clearing a jam.
1. If the paper is not feeding properly, pull the paper out of the machine.
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
1. Open the right door.
1
2
2. Open and close the front door to resume printing.
2. Remove the jammed paper by gently pulling it straight out.
3. Close the right door.
Troubleshooting_ 139
Paper jam inside the machine (Jam feed 3, Jam feed
4)
Click this link to open an animation about clearing a jam.
1. Open the right bottom door of the dual cassette feeder.
Paper jam inside the machine (Jam Registration)
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
1. Open the right door.
1
2
2. Remove the jammed paper by gently pulling it straight out.
2. Remove the jammed paper by gently pulling it straight out.
3. Close the right door.
3. Close the dual cassette feeder right bottom door.
Troubleshooting_ 140
Paper jam inside of the machine (Jam at Fuser out)
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
1. Open the right door.
Paper jam at the top of duplex path (Jam Duplex
Return, Jam Duplex 1)
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
1. Open the right door.
1
1
2
2
2. Open the fuser cover. Then remove the jammed paper by gently pulling
it straight out.
3. Close the fuser cover and the right door.
2. Remove the jammed paper by gently pulling it straight out.
1
1
2
2
3. Close the right door.
Troubleshooting_ 141
Paper jam at the inside of duplex path (Jam Duplex
2)
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
Paper jam bottom of duplex path (Jam Duplex Regi.)
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
1. Open the right door.
1. Open the right door.
1
1
2
2
2. Remove the jammed paper by gently pulling it straight out.
2. Remove the jammed paper by gently pulling it straight out.
1
2
3. Close the right door.
3. Close the right door.
Troubleshooting_ 142
Paper jam in exit area (Jam Exit Face down)
The bin full sensor is located in front of the output tray.
Click this link to open an animation about clearing a jam.
1. Gently pull the paper out of the output tray.
Paper jam at finisher’s exit
Click this link to open an animation about clearing a jam.
2. Open and close the front door. Printing automatically resumes.
If the optional Inner Finisher or booklet finisher is installed, remove the
jammed paper as shown below.
If this paper jam persists, make sure the bin full sensor is unfolded.
1. Gently pull the paper out of the finisher’s exit.
2. Open and close the finisher front door. Printing automatically resumes.
Troubleshooting_ 143
Paper jam inside of finisher
3. Gently pull the jammed paper out. Close the top cover
Click this link to open an animation about clearing a jam.
1. Lift up the finisher top cover.
2. Let the jammed paper move out by rotating the paper roller gear.
4. Open and close the finisher front door. Printing automatically resumes.
Troubleshooting_ 144
Understanding display messages
Message
Messages appear on the display screen to indicate the machine’s status or
errors. Some error messages are shown with graphics to help you
troubleshoot problem. Refer to the tables below to understand the
messages and their meaning, and correct the problem, if necessary.
Messages and their explanations are listed in alphabetical order.
•
•
•
•
•
•
•
•
If a message is not in the table, reboot the power and try the
printing job again. If the problem persists, call for service.
When you call for service, provide the service representative with
the contents of display message.
Some messages may not appear in the display depending on
options or models.
[color] indicates the color of toner or imaging unit.
[tray number] indicates the tray number.
[media type] indicates the media type.
[media size] indicates the paper size.
[error number] indicates the error number.
Message
Meaning
Suggested solutions
Actuator Fan
Failure [error
number]:Please
open/close door.
There is a problem in
the actuator fan.
Open and close the front
door. If the problem
persists, call for service.
Actuator Fan
Signal Failure
[error
number]:Please
open/close door.
There is a problem in
the actuator fan.
Open and close the front
door. If the problem
persists, call for service.
Actuator Motor
Failure [error
number]:Please
open/close door.
There is a problem in
the actuator motor.
Open and close the front
door. If the problem
persists, call for service.
Actuator Sensor
Failure [error
number]:Please
open/close door.
There is a problem in
the actuator sensor.
Open and close the front
door. If the problem
persists, call for service.
ADF System
Failure [error
number]:Call for
service if the
problem persists.
There is a problem in
the dual automatic
document feeder.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Booklet maker
Error [error
number]:Please
open/close door.
There is a problem in
the booklet maker.
Open and close the
booklet finisher front
door. If the problem
persists, call for service.
[color] Imaging
Unit Failure [error
number]:Install
[color] imaging
unit again.
There is a problem in
the imaging unit.
Reinstall the imaging
unit. If the problem
persists, call for service.
[color] Imaging
Unit Failure [error
number]:Please
open/close door.
There is a problem in
the imaging unit.
Open and close the front
door. If the problem
persists, call for service.
Meaning
Suggested solutions
[color] Imaging
Unit Failure [error
number]:Turn off
then on.
There is a problem in
the imaging unit.
Turn the machine off and
back on again. If the
problem persists, call for
service.
[color] imaging
unit is not
compatible. Check
user's guide.
The imaging unit you
have installed is not
for your machine.
Install a
Samsung-genuine
imaging unit designed for
your machine (see
"Available supplies" on
page 160).
[color] imaging
unit is not
installed. Install it.
The imaging unit is
not installed or the
imaging unit is not
properly installed.
Install the imaging unit. If
it is already installed, try
to reinstall the imaging
unit. If the problem
persists, call for service.
[color] imaging
unit is not original
Samsung. Check
user's guide.
The imaging unit you
have installed is not
for your machine.
Install a
Samsung-genuine
imaging unit, designed
for your machine (see
"Available supplies" on
page 160).
[color] imaging
unit requires
charger's cleaning.
Clean the unit.
The charger of
imaging unit need to
clean after the
specified number of
paper is printed out.
Clean the charger of
imaging unit (see
"Cleaning paper dust
stick and chargers of
imaging units" on
page 128).
[color] LSU Unit
Failure [error
number]:Turn off
then on.
There is a problem in
the LSU (Laser
Scanning Unit).
Turn the machine off and
back on again. If the
problem persists, call for
service.
[color] toner
cartridge Failure
[error
number]:Install
[color] toner
cartridge again.
There is a problem in
the toner cartridge.
Reinstall the toner
cartridge. If the problem
persists, call for service.
[color] toner
cartridge Failure
[error number]:
Install [color] toner
cartridge again.
The toner cartridge
you have installed is
not for your machine.
Install a
Samsung-genuine toner
cartridge designed for
your machine (see
"Check the type of the
toner cartridge for your
machine (see "Supplies
and accessories" on
page 160)." on
page 126).
Troubleshooting_ 145
Message
[color] toner
cartridge Failure
[error number]:
Please open/close
door.
Meaning
The toner cartridge
does not supply
enough toner.
Suggested solutions
•
•
•
[color] toner
cartridge is not
compatible. Check
user's guide.
The toner cartridge
you have installed is
not for your machine.
Thoroughly roll the
cartridge five or six
times to distribute the
toner evenly inside the
cartridge (see
"Redistributing toner"
on page 125).
Open and close the
front door. Or check
whether the sealing
tape of the toner
cartridge is removed or
not (see "Replacing
the toner cartridge" on
page 126).
If the problem persists,
call for service.
Install a
Samsung-genuine toner
cartridge designed for
your machine (see
"Check the type of the
toner cartridge for your
machine (see "Supplies
and accessories" on
page 160)." on
page 126).
[color] toner
cartridge is not
installed. Install it.
The toner cartridge is
not installed or the
cartridge is not
properly installed.
Install the toner cartridge.
If it is already installed,
try to reinstall the toner
cartridge. If the problem
persists, call for service.
DCF Failure [error
number]:
Check internal DCF
connection.
There is a problem in
the dual capacity
feeder.
Open and close the dual
capacity feeder, or check
the dual capacity feeder
connection with the
machine. If the problem
persists, call for service.
DCF Failure [error
number]:
Please open/close
[tray number].
There is a problem in
the dual capacity
feeder.
Open and close the tray.
If the problem persists,
call for service.
End of life, Replace
with new [color]
imaging unit.
The life of the imaging
unit expires totally.
Replace the imaging unit
with a Samsung-genuine
imaging unit (see
"Replacing the imaging
unit" on page 129).
End of life, Replace
with new [color]
toner cartridge.
The toner cartridge
has run out. The
machine stops
printing. Some
amount of toner may
remain in the cartridge
even when the
machine stops
printing.
.
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine toner
cartridge (see "Replacing
the toner cartridge" on
page 126).
Message
Meaning
Suggested solutions
End of life, Replace
with new transfer
belt unit.
The life of the transfer
belt unit expires
totally.
Replace the transfer belt
unit with a
Samsung-genuine
transfer belt unit, call for
service.
Engine System
Failure [error
number]:Please
open/close door.
There is a problem in
the engine system.
Open and close the front
door. If the problem
persists, call for service.
Engine System
Failure [error
number]:Turn off
then on.
There is a problem in
the engine system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Fax modem card is
not installed.
Install the card.
The optional fax kit is
not installed.
Install the optional fax kit.
If it is already installed,
try to reinstall the optional
fax kit. If the problem
persists, call for service.
Fax System Failure
[error
number]:Turn off
then on.
There is a problem in
the fax system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
FDI device is not
installed. Install
the device.
The FDI optional FDI
kit is not installed.
Install the optional FDI
kit. If it is already
installed, try to reinstall
the optional FDI kit. If the
problem persists, call for
service.
Feed door is
opened. Close it.
The door is not
securely latched.
Close the door until it
locks into place.
Finisher door is
open. Close it.
The finisher door is
not securely latched.
Close the door until it
locks into place.
Finisher Error
[error
number]:Please
open/close door.
There is a problem in
the finisher.
Open and close the
finisher door. If the
problem persists, call for
service.
Finisher Error
[error
number]:Turn off
then on.
There is a problem in
the finisher.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Finisher System
Failure [error
number]:Please
open/close door.
There is a problem in
the finisher.
Open and close the
finisher door. If the
problem persists, call for
service.
Finisher System
Failure [error
number]:Turn off
then on.
There is a problem in
the finisher.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Front door is open.
Close it.
The door is not
securely latched.
Close the door until it
locks into place.
Fuser Unit Failure
[error
number]:Turn off
then on.
There is a problem in
the fuser unit.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Troubleshooting_ 146
Message
Meaning
Suggested solutions
Message
Meaning
Suggested solutions
Input System
Failure [error
number]:Pull [tray
number] out and
insert it.
There is a problem in
the tray.
Open and close the tray.
If the problem persists,
call for service.
Image transfer belt
cleaning unit is not
compatible. Check
user's guide.
The image transfer
belt cleaning unit you
have installed is not
for your machine.
Install a
Samsung-genuine image
transfer belt cleaning
unit, designed for your
machine, call for service.
Image transfer belt
unit is not original
Samsung. Check
user's guide.
The image transfer
belt you have installed
is not for your
machine.
Install a
Samsung-genuine image
transfer belt, designed for
your machine, call for
service.
ITB Unit Failure
[error
number]:Turn off
then on.
There is a problem in
the image transfer belt
unit.
Turn the machine off and
back on again. If the
problem persists, call for
service.
MSOK System
Failure [error
number]:Turn off
then on.
There is a problem in
the engine system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Network cable is
disconnected.
Check it.
The machine is not
connected with a
network cable.
Connect the machine to
the network with a
network cable.
Option Feed door
is opened. Close it.
The door is not
securely latched.
Close the door until it
locks into place.
Original paper jam
in front of scanner
The originals are
jammed in duplex
automatic document
feeder.
Clear the jam (see
"Original paper jam in
front of scanner" on
page 133).
Original paper jam
inside of scanner
The originals are
jammed in duplex
automatic document
feeder.
Clear the jam (see
"Original paper jam inside
of scanner" on
page 134).
Output tray(face
down) is full.
Remove printed
media
The output tray (face
down) is full.
Remove papers from the
output tray (face down),
the machine resumes
printing.
Output tray(face
up) is full. Remove
printed media
The output tray (face
up) is full.
Remove papers from the
output tray (face up), the
machine resumes
printing.
Paper is empty in
[tray number].
Load paper.
There is no paper in
the tray.
Load paper in the tray.
Paper is empty in
tray MP. Load
paper.
There is no paper in
the multi-purpose tray.
Load paper in the
multi-purpose tray.
Paper is low in
[tray number].
Load paper.
Running out of paper
in the tray.
Load paper in the tray.
Fusing unit is not
compatible. Check
user's guide.
The fuser unit you
have installed is not
for your machine.
Install a
Samsung-genuine fuser
unit, designed for your
machine, call for service.
Fuser unit is not
installed correctly.
Install it.
The fuser unit is not
properly installed.
Reinstall the fuser unit. If
the problem persists, call
for service.
HDD is almost
full-1. Check user’s
guide.
HDD is almost full in
the machine.
Check Address Book or
User Profile. If
necessary, remove the
data which is unused in
Address Book or User
Profile.
HDD is almost
full-2. Check user’s
guide.
HDD is almost full in
the machine.
Check Stored
Document, or Secured
Job in Job Status. If
necessary, remove the
data which is unused in
Stored Document or
Secured Job.
HDD is almost
full-3. Check user’s
guide.
HDD is almost full in
the machine.
Check System Log at
Security in SyncThru™
Web Service. If
necessary, remove the
data in System Log.
HDD is almost
full-4. Check user’s
guide.
HDD is almost full in
the machine.
•
•
HDD is almost
full-5. Check user’s
guide.
HDD is almost full in
the machine.
HDD is almost
full-6. Check user’s
guide.
HDD is almost full in
the machine.
HDD System
Failure [error
number]:Turn off
then on.
There is a problem in
the hard disk.
Print or remove the
jobs on the queue
which are waiting for
its turn. You can check
the jobs pressing Job
Status (see "Job
Status button" on
page 36).
Print or remove the
received fax jobs in
Secure Receive (see
"Receiving in secure
receiving mode" on
page 70).
There is a problem in the
machine. Check the error
message on the display
screen and resolve the
problem.
There is a problem in the
machine. Check the error
message on the display
screen and resolve the
problem.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Troubleshooting_ 147
Message
Meaning
Suggested solutions
Message
Meaning
Suggested solutions
Paper jam at
entrance of
finisher
Paper has jammed
during finishing.
Clear the jam (see "Paper
jam inside of finisher" on
page 144).
Paper jam in MP
tray
Paper has jammed in
the feeding area of the
tray.
Clear the jam (see "Paper
jam in the multi-purpose
tray" on page 139).
Paper jam at exit of
finisher
Paper has jammed
during finishing.
Clear the jam (see
"Paper jam at finisher’s
exit" on page 143).
Prepare new
[color] imaging
unit.
The estimated life of
the imaging unit is
close.
Prepare a new imaging
unit for a replacement.
Paper Jam at the
bottom of duplex
path
Paper has jammed
during duplex printing.
Clear the jam (see "Paper
jam bottom of duplex
path (Jam Duplex Regi.)"
on page 142).
Prepare new
[color] toner
cartridge.
Paper Jam at the
inside of duplex
path
Paper has jammed
during duplex printing.
Clear the jam (see "Paper
jam at the inside of
duplex path (Jam Duplex
2)" on page 142).
Small amount of toner
is left in the indicated
cartridge. The
estimated cartridge
life of toner is close.
Prepare a new cartridge
for a replacement. You
may temporarily increase
the printing quality by
redistributing the toner
(see "Redistributing
toner" on page 125).
Paper Jam at the
return of duplex
path
Paper has jammed
during duplex printing.
Clear the jam (see "Paper
jam at the top of duplex
path (Jam Duplex Return,
Jam Duplex 1)" on
page 141).
Prepare new fuser
unit.
The estimated life of
the fuser unit is close.
Prepare a new fuser unit
for a replacement, call for
service.
Prepare new
transfer belt
cleaning unit.
The estimated life of
the transfer belt
cleaning unit is close.
Paper Jam at the
top of duplex path
Paper has jammed
during duplex printing.
Clear the jam (see "Paper
jam at the top of duplex
path (Jam Duplex Return,
Jam Duplex 1)" on
page 141).
Prepare a new transfer
belt cleaning unit for a
replacement, call for
service.
Prepare new
transfer belt unit.
The estimated life of
the transfer belt is
close.
Prepare a new transfer
belt for a replacement,
call for service.
Paper jam inside of
finisher
Paper has jammed
during finishing.
Clear the jam (see "Paper
jam inside of finisher" on
page 144).
Prepare new
Transfer roller.
The estimated life of
the transfer roller is
close.
Prepare a new transfer
roller for a replacement,
call for service.
Paper Jam inside
of machine
Paper has jammed
inside of the machine.
Clear the jam (see "Paper
jam inside the machine
(Jam feed 1, Jam feed 2)"
on page 139 or "Paper
jam inside the machine
(Jam feed 3, Jam feed 4)"
on page 140 or "Paper
jam inside the machine
(Jam Registration)" on
page 140 or "Paper jam
inside of the machine
(Jam at Fuser out)" on
page 141).
Remove sealing
tape of [color]
imaging unit and
reinstall.
The sealing tape of
the imaging unit is not
removed.
Remove the sealing tape
of the imaging unit (see
"Replacing the imaging
unit" on page 129).
Replace with new
[color] imaging
unit.
The indicated imaging
unit has almost
reached its estimated
imaging unit life. The
machine will stop
printing.
Replace the imaging unit
with a Samsung-genuine
imaging unit (see
"Replacing the imaging
unit" on page 129).
Replace with new
fuser unit.
The life of the fuser
unit expires totally.
Replace the fuser unit
with a Samsung-genuine
fuser unit, call for service.
Replace with new
Transfer roller.
The life of the transfer
roller expires totally.
Replace the transfer
roller with a
Samsung-genuine
transfer roller, call for
service.
Replace with new
[tray number]
pickup roller.
The life of the tray
pickup roller expires
totally.
Replace the tray pickup
roller with a
Samsung-genuine pickup
roller, call for service.
Replace with new
MP pickup roller.
The life of the MP
pickup roller expires
totally.
Replace the MP pickup
roller with a
Samsung-genuine MP
pickup roller, call for
service.
Paper jam in tray 1
Paper has jammed in
the feeding area of the
tray.
Clear the jam (see "Paper
jam in tray 1, 2" on
page 137).
Paper jam in tray 2
Paper has jammed in
the feeding area of the
tray.
Clear the jam (see "Paper
jam in tray 1, 2" on
page 137).
Paper jam in tray 3
Paper has jammed in
the feeding area of the
tray.
Clear the jam (see "Paper
jam in tray 3, 4" on
page 138).
Paper jam in tray 4
Paper has jammed in
the feeding area of the
tray.
Clear the jam (see "Paper
jam in tray 3, 4" on
page 138).
Troubleshooting_ 148
Message
Meaning
Suggested solutions
Right door is open.
Close it.
The door is not
securely latched.
Close the door until it
locks into place.
Scanner locked or
another problem
occurred.
The CCD (Charged
Couple Device) lock
has been locked.
Unlock the CCD lock . Or
turn the machine off and
back on again. If the
problem persists, call for
service. Scanner
Scan System
Failure [error
number]:Turn off
then on.
There is a problem in
the scan system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Second fax modem
card is not
installed. Install
the card.
The second optional
fax multiline kit is not
installed.
Install the optional fax
multiline kit. If it is already
installed, try to reinstall
the optional fax multiline
kit. If the problem
persists, call for service.
Shake [color] toner
cartridge.
Small amount of toner
is left in the indicated
cartridge.
You may temporarily
increase the printing
quality by redistributing
the toner (see
"Redistributing toner" on
page 125).
Side feeder door is
open. Close it.
The door is not
securely latched.
Close the door until it
locks into place.
Staple cartridge is
empty. Replace it.
The staple cartridge
has reached the end
of its lifespan.
This message appears
when the staple cartridge
is completely empty.
Replace the staple
cartridge.
Staple cartridge is
low. Replace
cartridge.
Small amount of
staple cartridge is left.
The estimated life of
staple cartridge is
close.
Prepare a new staple
cartridge for a
replacement.
Staple cartridge is
not installed.
Install it in finisher.
The staple cartridge is
not installed or the
staple cartridge is not
properly installed.
Install the staple
cartridge. If it is already
installed, try to reinstall
the staple cartridge. If the
problem persists, call for
service.
Staple cartridge of
booklet I is empty.
Replace cartridge.
The staple cartridge of
booklet has reached
the end of its lifespan.
This message appears
when the staple cartridge
is completely empty.
Replace the staple
cartridge.
Staple cartridge of
booklet I is low.
Replace cartridge.
Small amount of
staple cartridge of
booklet is left. The
estimated life of staple
cartridge is close.
Prepare a new staple
cartridge for a
replacement.
Message
Meaning
Suggested solutions
Staple cartridge of
booklet I is not
installed. Install
the cartridge.
The staple cartridge of
booklet is not installed
or the staple cartridge
is not properly
installed.
Install the staple
cartridge. If it is already
installed, try to reinstall
the staple cartridge. If the
problem persists, call for
service.
The clock became
initial time. Set a
time again.
The time setting of
machine is initialized.
Set the time setting in
Machine Setup.
Too much media in
the center tray.
Remove printed
media.
The center tray is full.
Remove printouts from
the center tray, the
machine resumes
printing.
Too much media in
booklet tray.
Remove printed
media.
The booklet tray is full.
Remove printouts from
the booklet tray, the
machine resumes
printing.
Too much media in
finisher tray.
Remove printed
media.
The finishing tray is
full.
Remove printouts from
the finishing tray, the
machine resumes
printing.
Top door of
scanner is open.
The duplex automatic
document feeder
cover is not securely
latched.
Close the cover until it
locks into place.
Transfer belt
cleaning unit is not
installed. Install it.
The transfer belt
cleaning unit is not
installed.
Power off/on, if the
problem persists, call for
service.
Transfer belt is not
installed. Install it.
The transfer belt is not
installed.
Power off/on, if the
problem persists, call for
service.
Transfer belt
cleaning unit is
worn. Replace with
new one.
The life of the transfer
belt cleaning unit
expires totally.
Replace the transfer belt
cleaning unit with a
Samsung-genuine
transfer belt cleaning
unit, call for service.
Transfer belt unit
is worn. Replace it.
The life of the transfer
belt unit expires
totally.
Replace the transfer belt
unit with a
Samsung-genuine
transfer belt unit, call for
service.
[tray number]
cassette is pulled
out. Insert it
properly.
The tray is not
securely latched.
Close the tray until it
locks into place.
[tray number] door
is open. Close it.
The tray is not
securely latched.
Close the tray until it
locks into place.
UI System Failure
[error
number]:Turn off
then on.
There is a problem in
the UI system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Troubleshooting_ 149
Message
Meaning
Suggested solutions
Video System
Failure [error
number]:Turn off
then on.
There is a problem in
the CPU.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Waste Motor does
not operate. Turn
off then on.
There is a problem in
the waste motor.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Waste toner
container is almost
full. Order new
one.
The estimated life of
the waste toner
container is close.
Prepare a new waste
toner container for a
replacement.
Waste toner
container is full.
Replace it.
The life of the waste
toner container
expires soon.
Replace the waste toner
container with a
Samsung-genuine waste
toner container (see
"Replacing the waste
toner container" on
page 132).
Waste toner
container is not
installed. Install it.
The waste toner
container is not
installed.
Install the waste toner
container. If it is already
installed, try to reinstall
the waste toner
container. If the problem
persists, call for service.
Solving other problems
The following chart lists some trouble conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem is
corrected. If the problem persists, contact a service representative.
Other problems include:
• see "Power and cable connecting problems" on page 150.
• see "Display screen problem" on page 150.
• see "Paper feeding problems" on page 151.
• see "Printing problems" on page 151.
• see "Printing quality problems" on page 153.
• see "Copying problems" on page 155.
• see "Scanning problems" on page 156.
• see "Fax problems (optional)" on page 156.
• see "Common PostScript problems" on page 157.
• see "Common Windows problems" on page 157.
• see "Common Linux problems" on page 158.
• see "Common MAC problems" on page 159.
Power and cable connecting problems
Condition
The machine is
not receiving
power,
or the connection
cable between the
computer and the
machine is not
connected
properly.
Suggested solutions
•
Plug in the power cord and turn on the power
switch (see "Turning the machine on" on
page 33).
Click this link to open an animation about
solving power problems.
•
Disconnect the machine cable and reconnect it
(see "Connecting a printer cable" on page 34).
Click this link to open an animation about
solving connection problems.
Display screen problem
Condition
The display screen
does not show
anything.
Troubleshooting_ 150
Suggested solutions
•
•
Adjusts the brightness of the display screen.
Turn the machine off and back on again. If the
problem persists, call for service.
Paper feeding problems
Condition
Printing problems
Suggested solutions
Condition
Paper jams during
printing.
Clear the paper jam (see "Clearing paper jams"
on page 137).
Paper sticks
together.
•
•
•
•
Multiple sheets of
paper do not feed.
•
•
Paper does not feed
into the machine.
•
•
•
•
•
The paper keeps
jamming.
•
•
•
•
The machine
does not print.
Check the maximum paper capacity of the
tray (see "Print media specifications" on
page 165).
Make sure that you are using the correct type
of paper (see "Print media specifications" on
page 165).
Remove paper from the tray and flex or fan
the paper.
Humid conditions may cause some paper to
stick together.
Different types of paper may be stacked in the
tray. Load paper of only one type, size, and
weight.
If multiple sheets have caused a paper jam,
clear the paper jam (see "Clearing paper
jams" on page 137).
Remove any obstructions from inside the
machine.
Paper has not been loaded correctly. Remove
paper from the tray and reload it correctly.
There is too much paper in the tray. Remove
excess paper from the tray.
The paper is too thick. Use only paper that
meets the specifications required by the
machine (see "Print media specifications" on
page 165).
If an original does not feed into the machine,
the DADF rubber pad may require to be
replaced. Contact a service representative.
There is too much paper in the tray. Remove
excess paper from the tray. If you are printing
on special materials, use the multi-purpose
tray.
An incorrect type of paper is being used. Use
only paper that meets the specifications
required by the machine (see "Print media
specifications" on page 165).
There may be debris inside the machine.
Open the front door and remove any debris.
If an original does not feed into the machine,
the DADF rubber pad may need to be
replaced. Contact a service representative.
Transparencies stick
together in the paper
exit.
Use only transparencies specifically designed
for laser printers. Remove each transparency as
it exits from the machine.
Envelopes skew or
fail to feed correctly.
Ensure that the paper guides are against both
sides of the envelopes.
Troubleshooting_ 151
Possible cause
Suggested solutions
The machine is not
receiving power.
Check the power cord
connections. Check the
power switch and the power
source.
The machine is not
selected as the
default machine.
Select your machine as your
default machine in your
Windows.
Check the machine for the following:
• The front door is not closed. Close the front
door.
• Paper is jammed. Clear the paper jam (see
"Clearing paper jams" on page 137).
• No paper is loaded. Load paper (see "Loading
paper in the tray" on page 39).
• The toner cartridge or the imaging unit is not
installed. Install the toner cartridge or imaging
unit.
If a system error occurs, contact your service
representative.
The connection
cable between the
computer and the
machine is not
connected properly.
Disconnect the machine
cable and reconnect it.
The connection
cable between the
computer and the
machine is
defective.
If possible, attach the cable
to another computer that is
working properly and print a
job. You can also try using a
different machine cable.
The port setting is
incorrect.
Check the Windows printer
setting to make sure that the
print job is sent to the correct
port. If the computer has
more than one port, make
sure that the machine is
attached to the correct one.
The machine may
be configured
incorrectly.
Check the Printing
Preferences to ensure that
all of the print settings are
correct (see "Opening
printing preferences" on
page 101).
The printer driver
may be incorrectly
installed.
Repair the machine
software.
The machine is
malfunctioning.
Check the display message
on the control panel to see if
the machine is indicating a
system error. Contact a
service representative.
Condition
Possible cause
(Continued) The
machine does not
print.
The document size
is so big that the
hard disk space of
the computer is
insufficient to
access the print job.
Get more hard disk space
and print the document
again.
The paper option
that was selected in
the Printing
Preferences may
be incorrect.
For many software
applications, the paper
source selection is found
under the Paper tab within
the Printing Preferences.
Select the correct paper
source. see the printer driver
help screen (see "Opening
printing preferences" on
page 101).
The machine
selects print
materials from
the wrong paper
source.
Suggested solutions
A print job is
extremely slow.
The job may be
very complex.
Reduce the complexity of
the page or try adjusting the
print quality settings.
Half the page is
blank.
The page
orientation setting
may be incorrect.
Change the page orientation
in your application. see the
printer driver help screen.
The paper size and
the paper size
settings do not
match.
Ensure that the paper size in
the printer driver settings
matches the paper in the
tray.
Or, ensure that the paper
size in the printer driver
settings matches the paper
selection in the software
application settings you use.
The machine
prints, but the
text is wrong,
garbled, or
incomplete.
The machine cable
is loose or
defective.
Disconnect the machine
cable and reconnect. Try a
print job that you have
already printed successfully.
If possible, attach the cable
and the machine to another
computer that you know
works and try a print job.
Finally, try a new machine
cable.
The wrong printer
driver was selected.
Check the application’s
printer selection menu to
ensure that your machine is
selected.
The software
application is
malfunctioning.
Try printing a job from
another application.
The operating
system is
malfunctioning.
Exit Windows and reboot the
computer. Turn the machine
off and back on again.
If you are in a DOS
environment, the
font setting for your
machine may be
set incorrectly.
Change the language
setting.
Condition
Pages print, but
they are blank.
Possible cause
Suggested solutions
The toner cartridge
is defective or out of
toner.
Redistribute the toner, if
necessary.
If necessary, replace the
toner cartridge.
The file may have
blank pages.
Check the file to ensure that
it does not contain blank
pages.
Some parts, such
as the controller or
the board, may be
defective.
Contact a service
representative.
The machine
does not print
PDF file correctly.
Some parts of
graphics, text, or
illustrations are
missing.
Incompatibility
between the PDF
file and the Acrobat
products.
Printing the PDF file as an
image may enable the file to
print. Turn on Print As
Image from the Acrobat
printing options.
The print quality
of photos is not
good. Images are
not clear.
The resolution of
the photo is very
low.
Reduce the photo size. If
you increase the photo size
in the software application,
the resolution will be
reduced.
Before printing,
the machine
emits vapor near
the output tray.
Using damp paper
can cause vapor
during printing.
This is not a problem. Just
keep printing.
The machine
does not print
special- sized
paper, such as
billing paper.
Paper size and
paper size setting
do not match.
Set the correct paper size in
the Custom Paper List in
the Paper tab in the
Printing Preferences (see
"Paper tab" on page 102).
Your machine
has an odd smell
during initial use.
The oil used to
protect the fuser is
evaporating.
After printing about 100
color pages, there will be no
more smell. It is a temporary
issue.
Troubleshooting_ 152
It will take longer to
print when you print a
PDF file as an image.
Printing quality problems
If the inside of the machine is dirty or paper has been loaded improperly,
there might be a reduction in print quality. see the table below to clear the
problem.
Condition
•
•
•
•
•
•
•
•
•
Dropouts
If a vertical white streak or faded area
appears on the page, the toner supply is low.
You may be able to temporarily extend the
toner cartridge life. If this does not improve
the print quality, install a new toner cartridge.
The color tone might not be adjusted. Adjust
the color tone.
The paper may not meet paper specifications;
for example, the paper may be too moist or
rough (see "Print media specifications" on
page 165).
If the entire page is light, the print resolution
setting is too low or the toner save mode is
on. Adjust the print resolution and turn the
toner save mode off. see the help screen of
the printer driver.
A combination of faded or smeared defects
may indicate that the toner cartridge needs
cleaning. Contact a service representative.
The surface of the LSU part inside the
machine may be dirty. Clean the LSU, contact
a service representative.
The paper may not meet specifications; for
example, the paper may be too moist or rough
(see "Print media specifications" on
page 165).
The transfer roller may be dirty. Clean the
inside of your machine. Contact a service
representative.
The paper path may need cleaning. Contact a
service representative.
Check the location of the machine. If the area
is not well-ventilated, this problem may occur.
Suggested Solutions
White Spots
If white spots appear on the page:
• The paper is too rough and a lot of dirt from a
paper falls to the inner devices within the
machine, so the transfer roller may be dirty.
Clean the inside of your machine. Cleaning
the inside or contact a service
representative.
• The paper path may need cleaning. Cleaning
the inside or contact a service
representative.
Vertical lines
If black vertical streaks appear on the page:
• The drum inside the printer has probably
been scratched. Remove the imaging unit
and install a new one. Contact a service
representative.
If white vertical streaks appear on the page:
• The surface of the LSU part inside the
machine may be dirty. Cleaning the inside or
contact a service representative.
If vertical streaks appear on the page:
• The surface of the scanner glass and its
white sheet may be dirty. Cleaning the inside
or contact a service representative.
Color or Black
background
If the amount of background shading becomes
unacceptable:
• Change the image transfer belt if it has
reached its lifespan. Contact a service
representative.
• Check the environmental conditions: very
dry conditions (low humidity) or a high level
of humidity (higher than 80% RH) can
increase the amount of background shading.
• Remove the old toner cartridge and install a
new one.
Toner smear
If toner smears on the page:
• Clean the inside of the machine. Cleaning
the inside or contact a service
representative.
• Check the paper type and quality (see "Print
media specifications" on page 165).
• Remove the imaging unit and install a new
one. Contact a service representative.
• Change the image transfer belt if it has
reached its lifespan. Contact a service
representative.
Suggested Solutions
Light or faded print •
Toner specks
Condition
If faded areas, generally rounded, occur
randomly on the page:
• A single sheet of paper may be defective.
Try reprinting the job.
• The moisture content of the paper is uneven
or the paper has moist spots on its surface.
Try a different brand of paper (see "Print
media specifications" on page 165).
• The paper lot is bad. The manufacturing
processes can cause some areas to reject
toner. Try a different kind or brand of paper.
• Change the printer option and try again. Go
to Printing Preferences, click Paper tab,
and set type to thick paper (see "Opening
printing preferences" on page 101).
• If these steps do not correct the problem,
contact a service representative.
Troubleshooting_ 153
Condition
Vertical repetitive
defects
Background
scatter
A
Misformed
characters
Suggested Solutions
If marks repeatedly appear on the printed side of
the page at even intervals:
• The imaging unit may be damaged. If a
repetitive mark occurs on the page, run a
cleaning sheet through several times to
clean the imaging unit. Cleaning the inside. If
you still have the same problems, remove
the imaging unit and install a new one.
Contact a service representative.
• Parts of the machine may have toner on
them. If the defects occur on the back of the
page, the problem will likely correct itself
after a few more pages.
• The fusing assembly may be damaged.
Contact a service representative.
Background scatter results from bits of toner
randomly distributed on the printed page.
• The paper may be too damp. Try printing
with a different batch of paper. Do not open
packages of paper until necessary so that
the paper does not absorb too much
moisture.
• If background scatter occurs on an envelope,
change the printing layout to avoid printing
over areas that have overlapping seams on
the reverse side. Printing on seams can
cause problems.
• If background scatter covers the entire
surface area of a printed page, adjust the
print resolution through your software
application or in Printing Preferences (see
"Opening printing preferences" on
page 101).
•
•
Page skew
Condition
•
•
•
•
If characters are improperly formed and
producing hollow images, the paper stock
may be too slick. Try different paper (see
"Print media specifications" on page 165).
If characters are improperly formed and
producing a wavy effect, the scanner unit may
need service. Cleaning the scan unit or
contact a service representative.
Ensure that the paper is loaded properly.
Check the paper type and quality (see "Print
media specifications" on page 165).
Ensure that the paper or other material is
loaded correctly and the guides are not too
tight or too loose against the paper stack.
Ensure that the standard tray right bottom
door, dual cassette feeder right bottom door
or high capacity feeder right bottom door is
securely closed. If the bottom doors are not
completely closed, open and close the bottom
doors.
Curl or wave
Suggested Solutions
•
•
•
Wrinkles or
creases
•
•
•
•
Ensure that the paper is loaded properly.
Check the paper type and quality. Both high
temperature and humidity can cause paper
curl (see "Print media specifications" on
page 165).
Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
Ensure that the paper is loaded properly.
Check the paper type and quality (see "Print
media specifications" on page 165).
Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
Ensure that the standard tray right bottom
door, dual cassette feeder right bottom door
or high capacity feeder right bottom door is
securely closed. If the bottom doors are not
completely closed, open and close the bottom
doors.
Back of printouts
are dirty
Check for leaking toner. Clean the inside of the
machine. Cleaning the inside or contact a
service representative.
Solid Color or
Black pages
•
•
A
Loose toner
Troubleshooting_ 154
•
•
•
•
•
The imaging unit may not be installed
properly. Remove the imaging unit and
reinsert it.
The imaging unit may be defective and need
replacing. Remove the imaging unit and
install a new one. Contact a service
representative.
The machine may require repair. Contact a
service representative.
Clean the inside of the machine. Cleaning the
inside or contact a service representative.
Check the paper type and quality (see "Print
media specifications" on page 165).
Remove the imaging unit and install a new
one. Contact a service representative.
If the problem persists, the machine may
require repair. Contact a service
representative.
Condition
Character Voids
A
Horizontal stripes
Curl
Copying problems
Suggested Solutions
Character voids are white areas within parts of
characters that should be solid black:
• If you are using transparencies, try another
type of transparency. Because of the
composition of transparencies, some
character voids are normal.
• You may be printing on the wrong surface of
the paper. Remove the paper and turn it
around.
• The paper may not meet paper
specifications (see "Print media
specifications" on page 165).
If horizontally aligned black streaks or smears
appear:
• The imaging unit may be installed
improperly. Remove the imaging unit and
reinsert it.
• The imaging unit may be defective. Remove
the imaging unit and install a new one.
Contact a service representative.
• If the problem persists, the machine may
require repair. Contact a service
representative.
If the printed paper is curled or paper does not
feed into the machine:
• Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
• Change the printer option and try again. Go
to Printing Preferences, click Paper tab,
and set type to thin paper (see "Opening
printing preferences" on page 101).
Condition
Suggested solution
Copies are too light
or too dark
Use Light and Dark arrows to lighten or darken
the backgrounds of copies in the Basic tab of
the Copy menu.
Smears, lines,
marks, or spots
appear on copies.
•
•
Copy image is
skewed.
•
•
•
Your machine is probably being used at an
altitude of 1,000 m (3,281 ft) or above.
The high altitude may affect the print quality,
such as loose toner or light imaging. Change the
correct altitude setting to your machine.
Ensure that the original is face down on the
scanner glass or face up in the DADF.
Check that the copy paper is loaded correctly.
If the problem persists, the machine may
require repair. Contact a service
representative.
Blank copies print
out.
Ensure that the original is face down on the
scanner glass or face up in the DADF.
Image rubs off the
copy easily.
•
•
Frequent copy paper
jams occur.
•
•
•
An unknown image
repetitively
appears on a few
sheets or loose
toner, light print, or
contamination
occurs.
If the defects are on the original, press
left/right arrow to lighten the background of
your copies in the Basic tab of the Copy
menu (see "Changing the darkness" on
page 54).
If there are no defects on the original, clean
the scan unit. Cleaning the scan unit or
contact a service representative.
Toner cartridge
produces fewer
copies than
expected before
running out of toner.
•
•
•
Troubleshooting_ 155
Replace the paper in the tray with paper from
a new package.
In high humidity areas, do not leave paper in
the machine for extended periods of time.
Fan the stack of paper, then turn it over in the
tray. Replace the paper in the tray with a fresh
supply. Check/adjust the paper guides, if
necessary.
Ensure that the paper is the proper paper
weight.
Check for copy paper or pieces of copy paper
remaining in the machine after a paper jam
has been cleared.
Your originals may contain pictures, solids, or
heavy lines. For example, your originals may
be forms, newsletters, books, or other
documents that use more toner.
The DADF may be left open while copies are
being made.
The machine may be turned on and off
frequently.
Scanning problems
Conditon
The scanner does not
work.
Suggested solutions
•
•
•
•
•
The unit scans very
slowly.
•
•
•
Message appears on
your computer
screen:
• Device can’t be
set to the H/W
mode you want.
• Port is being used
by another
program.
• Port is Disabled.
• Scanner is busy
receiving or
printing data.
When the current
job is completed,
try again.
• Invalid handle.
• Scanning has
failed.
Fax problems (optional)
•
•
•
•
•
•
condition
Make sure that you place the original to be
scanned face down on the scanner glass, or
face up in the DADF.
There may not be enough available memory
to hold the document you want to scan. Try
the Prescan function to see if that works.
Try lowering the scan resolution rate.
Check that the machine cable is connected
properly.
Make sure that the machine cable is not
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
Check that the scanner is configured
correctly. Check scan setting in the Easy
Document Creator or the application you
want to use to make certain that the scanner
job is being sent to the correct port (for
example, USB001).
Check if the machine is printing received
data. If so, scan the document after the
received data has been printed.
Graphics are scanned more slowly than text.
Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.
There may be a copying or printing job in
progress. Try your job again when that job is
finished.
The selected port is currently being used.
Restart your computer and try again.
The machine cable may be improperly
connected or the power may be off.
The scanner driver is not installed or the
operating environment is not set up properly.
Ensure that the machine is properly
connected and the power is on, then restart
your computer.
The USB cable may be improperly
connected or the power may be off.
suggested solutions
The machine is not
working, there is no
display, or the
buttons are not
working.
•
•
Unplug the power cord and plug it in again.
Ensure that there is power being supplied to
the electrical outlet.
No dial tone sounds.
•
Check that the phone line is properly
connected.
Check that the phone socket on the wall is
working by plugging in another phone.
•
The numbers stored
in memory do not
dial correctly.
Make sure that the numbers are stored in
memory correctly (see "Setting up an address
book" on page 94).
The original does
not feed into the
machine.
•
•
•
Make sure that the paper is not wrinkled and
you are inserting it in correctly. Check that the
original is the right size, not too thick or thin.
Make sure that the DADF is firmly closed.
The DADF rubber pad may need to be
replaced. Contact a service representative.
Faxes are not
received
automatically.
•
•
•
The receiving mode should be set to fax.
Make sure that there is paper in the tray.
Check to see if the display shows any error
message. If it does, clear the problem
The machine does
not send.
•
Make sure that the original is loaded in the
DADF or on the scanner glass.
Check the recipient’s fax machine (if it has a
problem).
•
The incoming fax
has blank spaces or
is of poor-quality.
•
Some of the words
on an incoming fax
are stretched.
The fax machine sending the fax had a
temporary document jam.
There are lines on
the originals you
sent.
Check your scan unit for marks and clean it.
Cleaning the scan unit.
Troubleshooting_ 156
•
•
•
The fax machine sending you the fax may be
faulty.
A noisy phone line can cause line errors.
Check your machine by making a copy.
The toner cartridge may be empty. Replace
the toner cartridge.
Common Windows problems
condition
suggested solutions
The machine dials a
number, but the
connection with the
other fax machine
fails.
The other fax machine may be turned off, out of
paper, or cannot answer incoming calls. Speak
with the other machine operator and ask her/him
to solve out the problem.
Faxes do not store in
memory.
Blank areas appear
at the bottom of
each page or on
other pages, with a
small strip of text at
the top
Exit all software applications. Remove all
software from the printer’s startup group, then
restart Windows. Reinstall the printer driver.
There may not be enough memory space to
store the fax. If the display indicating the
memory status shows, delete any faxes you no
longer need from the memory, and then try to
store the fax again.
“General Protection
Fault”, “Exception
OE”, “Spool 32”, or
“Illegal Operation”
messages appear.
Close all other applications, reboot Windows
and try printing again.
You may have chosen the wrong paper settings
in the user option setting. For details about
paper settings (see "Tray setting" on page 47).
“Fail To Print”, “A
printer timeout error
occurred” messages
appear.
These messages may appear during printing.
Just keep waiting until the machine finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
The following situations are PS language specific and may occur when
several printer languages are used.
PostScript file
cannot be printed.
Suggested solutions
“File in Use”
message appears
during installation.
Common PostScript problems
Problem
Condition
Possible cause
The PostScript
driver may not be
installed correctly.
Refer to Microsoft Windows 2000/XP/2003/Vista User’s Guide that
came with your computer for further information on Windows error
messages.
Solution
•
•
•
Install the PostScript
driver.
Print a configuration
page and verify that
the PS version is
available for printing.
If the problem persists,
contact a service
representative.
“Limit Check Error”
message appears.
The print job was
too complex.
You might need to
reduce the complexity of
the page or install more
memory.
A PostScript error
page prints.
The print job may
not be PostScript.
Make sure that the print
job is a PostScript job.
Check to see whether
the software application
expected a setup or
PostScript header file to
be sent to the machine.
The optional dual
cassette feeder (tray
3, tray 4) is not
selected in the
driver.
The printer driver
has not been
configured to
recognize the
optional dual
cassette feeder
(tray 3, tray 4).
Open the PostScript
driver properties, select
the Device Options tab,
and set the tray option of
the Tray Options
section.
When printing a
document in MAC
with Acrobat Reader
6.0 or higher, colors
print incorrectly.
The resolution
setting in the printer
driver may not be
matched with the
one in Acrobat
Reader.
Make sure that the
resolution setting in your
printer driver matches
the one in Acrobat
Reader.
Troubleshooting_ 157
Common Linux problems
condition
The machine does
not print.
Suggested solutions
•
•
•
•
•
The machine does
not print whole
pages, and output is
printed on half the
page.
condition
Check if the printer driver is installed in your
system. Open Unified Driver Configurator and
switch to the Printers tab in Printers
configuration window to look at the list of
available machines. Make sure that your
machine is displayed on the list. If not, open
Add new printer wizard to set up your
device.
Check if the machine is started. Open
Printers configuration and select your
machine on the printers list. Look at the
description in the Selected printer pane. If its
status contains Stopped string, press the
Start button. After that normal operation of
the machine should be restored. The
“stopped” status might be activated when
some problems in printing occurred. For
instance, this could be an attempt to print a
document when the port is claimed by a
scanning application.
Ensure the port is not busy. Since functional
components of machine (printer and scanner)
share the same I/O interface (port), the
situation of simultaneous access of different
user applications to the same port is possible.
To avoid possible conflicts, only one of them
at a time is allowed to gain control over the
device. The other user will encounter “device
busy” response. You should open ports
configuration and select the port assigned to
your machine. In the Selected port pane you
can see if the port is occupied by some other
application. If this is the case, you should
either wait for completion of the current job or
press the Release port button, if you are sure
that the present application is not functioning
properly.
Check if your application has special print
option such as “-oraw”. If “-oraw” is specified
in the command line parameter, then remove
it to print properly. For Gimp front-end, select
“print” -> “Setup printer” and edit command
line parameter in the command item.
The CUPS (Common Unix Printing System)
version distributed with SuSE Linux 9.2
(cups-1.1.21) has a problem with ipp (Internet
Printing Protocol) printing.Use the socket
printing instead of ipp or install a later version
of CUPS (cups-1.1.22 or higher).
Suggested solutions
I cannot scan via
Gimp Front-end.
Check if Gimp Front-end has Xsane: Device
dialog on the Acquire menu. If not, you should
install Xsane plug-in for Gimp on the your
computer. You can find Xsane plug-in package
for Gimp on Linux distribution CD or Gimp home
page. For the detailed information, refer to the
Help for Linux distribution CD or Gimp Front-end
application.
If you wish to use another kind of scan
application, refer to application’s Help.
I encounter the
“Cannot open port
device file” error
when printing a
document.
Avoid changing print job parameters (via LPR
GUI, for example) while a print job is in progress.
Known versions of CUPS server break the print
job whenever print options are changed and
then try to restart the job from the beginning.
Since Unified Linux Driver locks the port while
printing, the abrupt termination of the driver
keeps the port locked and unavailable for
subsequent print jobs. If this situation occurs, try
to release the port by selecting Release port in
Port configuration window.
The machine does
not appear on the
scanners list.
•
It is a known problem that occurs when a color
machine is used on version 8.51 or earlier of
Ghostscript, 64-bit Linux OS, and has been
reported to bugs.ghostscript.com as Ghostscript
Bug 688252.The problem is solved in AFPL
Ghostscript v. 8.52 or above. Download the
latest version of AFPL Ghostscript from
http://sourceforge.net/projects/ghostscript/ and
install it to solve this problem.
Troubleshooting_ 158
•
•
Ensure your machine is attached to your
computer, connected properly via the USB
port, and is turned on.
Ensure the scanner driver for your machine is
installed in your system. Open Unified Linux
Driver configurator, switch to Scanners
configuration, then press Drivers. Make
sure that driver with a name corresponding to
your machine's name is listed in the window.
Ensure the port is not busy. Since functional
components of machine (printer and scanner)
share the same I/O interface (port), the
situation of simultaneous access of different
user applications to the same port is possible.
To avoid possible conflicts, only one of them
at a time is allowed to gain control over the
device. The other user will encounter “device
busy” response. This usually happens when
starting a scan procedure. An appropriate
message box appears.
To identify the source of the problem, open
the Ports configuration and select the port
assigned to your scanner, port's symbol
/dev/mfp0 corresponds to LP:0 designation
displayed in the scanners’ options, /dev/mfp1
relates to LP:1, and so on. USB ports start at
/dev/mfp4, so scanner on USB:0 relates to
/dev/mfp4 respectively and so forth
sequentially. In the Selected port pane, you
can see if the port is occupied by another
application. If this is the case, you should
either wait for completion of the current job or
press the Release port button, if you are sure
that the present port application is not
functioning properly.
condition
The machine does
not scan.
Suggested solutions
•
•
Ensure a document is loaded into the
machine, ensure your machine is connected
to the computer.
If there is an I/O error while scanning.
Refer to the Linux User’s Guide that came with your computer for
further information on Linux error messages.
Common MAC problems
condition
Suggested solutions
The machine does
not print PDF files
correctly. Some
parts of graphics,
text, or illustrations
are missing.
Printing the PDF file as an image may enable
the file to print. Turn on Print As Image from the
Acrobat printing options.
The document has
printed, but the print
job has not
disappeared from
the spooler in Mac
OS X10.3.2.
Update your MAC OS to MAC OS X 10.3.3. or
higher.
Some letters are not
displayed normally
during the cover
page printing.
Mac OS X cannot create the font during the
cover page printing. The English alphabet and
numbers are displayed normally on the cover
page.
When printing a
document in MAC
with Acrobat
Reader 6.0 or higher,
colors print
incorrectly.
Make sure that the resolution setting in your
machine driver matches the one in Acrobat
Reader.
It will take longer to print when you print a
PDF file as an image.
Refer to MAC User’s Guide that came with your computer for further
information on MAC error messages.
Troubleshooting_ 159
Supplies and accessories
12.
This guide provides information on purchasing supplies, accessories and maintenance parts available for your machine.
This chapter includes:
•
•
How to purchase
Available supplies
•
•
Available accessories may differ from country to country. Contact your
sales representatives to obtain the list of available accessories.
How to purchase
To order Samsung-authorized supplies, accessories and maintenance
parts, contact your local Samsung dealer or the retailer where you
purchased your machine. You can also visit www.samsung.com/supplies,
select your country/region, and obtain information on calling for service.
Available accessories
Checking replaceable’s lifespan
Type
Approx. 50,000 images
CLT-R809
Waste toner
container
Approx. 100,000 imagesc
CLT-W809
a. Declared yield value in accordance with 5% coverage.
When supplies reach their lifespan, you can order the following types of
supplies for your machine.
Depending on the options and job mode used, the toner cartridge’s
lifespan may differ.
You must purchase supplies, including toner cartridges, in the same
country where you purchased your machine. Otherwise, supplies will
be incompatable with your machine since the system configuration of
these vary from country to country.
SCX-812x Series
Average yielda
Toner cartridge
Average continuous black
cartridge yield: 25,000
standard pages
MLT-D709S (Black)
Imaging unit
Approx. 100,000 images
MLT-R709
Waste toner
container
Approx. 100,000 imagesc
MLT-W709
Part name
a. Declared yield value in accordance with 5% coverage.
CLX-92x1_9301 Series
Type
Average yielda
Toner cartridge
Average continuous black
cartridge yield: 20,000
standard pages
CLT-K809S (Black)
Average continuous
colored cartridge yield:
15,000 standard pages
(Cyan/Magenta/Yellow)
CLT-C809S (Cyan)
CLT-M809S (Magenta)
CLT-Y809S (Yellow)
Part name
Imaging unit
Available supplies
Type
Average yielda
Part name
Supplies and accessories_ 160
Necessary precautions to take when installing
accessories
•
•
•
Disconnect the power cord.
Never remove the control board cover while the power is turned on.
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
Discharge static electricity.
The control board and internal accessories (network interface card or
memory module) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, repeat this procedure to discharge any static
electricity again.
Activating the added accessories in the PS driver properties.
After installing an accessory such as an optional tray, PS driver users
must do the additional setting. Go to the PS printer properties and set
the added accesorry activated.
When installing accessories, the battery inside the machine is a
service component. Do not change it by yourself.
There is a risk of an explosion if battery is replaced by an incorrect
type. Dispose used batteries according to the instructions.
Accessory
You can place an
external authentication
device or
miscellaneous items on
the working table.
CLX-WKT000
Fax Kit
This fax kit allows you
to use your machine as
a fax.
CLX-FAX160
FDI(Foreign Device
Interface)Kit
This card is installed
inside the machine to
allow a third party
device such as a coin
operated device or a
card reader. Those
devices allow the
payfor-print service on
your machine.
CLX-KIT10F
Hard Disk Kit
This hard disk kit will
help the machine to be
used in various ways.
ML-HDK471
Job Separator
This Job separator will
help the machine to
collate printouts.
CLX-JST100
You can purchase and install accessories to enhance your machine’s
performance and capacity.
function
Part name
Cabinet Stand
You can place the
machine on the
ergonomically-designed
cabinet which lets you
reach the machine
conveniently. Also, you
can easily move the
cabinet with its wheels,
if necessary, and store
miscellaneous items
like papers into the
cabinet.
CLX-DSK20T
Dual Cassette
Feeder
If you are experiencing
frequent Paper Source
problems, you can
attach an additional
tray. The optional tray
can hold up to 1,040
sheets. You can print
documents in various
sizes and types of print
materials in the tray.
CLX-PFP100
300-Sheet Inner
Finisher
This Inner Finisher
allows you to sort,
group and staple
printouts.
CLX-FIN50S
Part name
Working Table
Available accessories
Accessory
function
Supplies and accessories_ 161
Checking replaceable’s lifespan
If you experience frequent paper jams or printing problems, check the
remaining lifespan of supplies. Replace the corresponding parts, if
necessary.
1. Press Machine Setup > Others > Supplies Life from the main screen.
2. Check the supplies life.
3. Press Back for return to the previous screen.
Supplies and accessories_ 162
Specifications
This chapter gives information regarding this machine’s specifications.
This chapter include:
•
•
•
•
Hardware specifications
Environmental specifications
Electrical specifications
Print media specifications
The specification values here are based on preliminary data. see www.samsung.com for current information.
Hardware specifications
Item
Dimension
Weight
CLX-93x1 Series
CLX-92x1 Series
SCX-812x Series
Height (with Duplex Automatic Document Feeder)
700.8 mm (27.6 inches)
1102.5 mm (43.4 inches)
Depth
600 mm (23.6 inches)
620 mm (24.4 inches)
Width
560 mm (22 inches)
Machine without consumables and options
55.5 Kg (122 lbs)
Duplex automatic document feeder
5 Kg (11 lbs)
72.5 Kg (160 lbs)
Environmental specifications
Item
Noise Levela
Temperature
Humidity
CLX-93x1 Series
CLX-92x1 Series
SCX-812x Series
Ready mode
43 dB(A)
Printing mode (Simplex)
(Duplex: Simplex+2dBA)
•
•
•
Tray 1: 52dB(A)
MP : 54 dB(A)
Option tray : 54dB(A)
•
•
•
Tray 1: 52dB(A)
MP : 54 dB(A)
Option tray : 54dB(A)
Copying mode (Simplex)
(Duplex: Simplex+2dBA)
•
•
•
Tray 1: 55dB(A)
MP : 57 dB(A)
Option tray : 57dB(A)
•
•
•
Tray 1: 55dB(A)
MP : 57 dB(A)
Option tray : 57dB(A)
Printing mode (with Finisher)
(Simplex)
(Duplex: Simplex+2dBA)
•
•
•
Tray 1: 54dB(A)
MP : 56 dB(A)
Option tray : 56dB(A)
•
•
•
Tray 1: 54dB(A)
MP : 56 dB(A)
Option tray : 56dB(A)
Copying mode (with Finisher)
(Simplex)
(Duplex: Simplex+2dBA)
•
•
•
Tray 1: 57dB(A)
MP : 59 dB(A)
Option tray : 59dB(A)
•
•
•
Tray 1: 57dB(A)
MP : 59 dB(A)
Option tray : 59dB(A)
Operation
10 to 32 °C (50 to 90 °F)
Storage
-20 to 40 °C (-4 to 104 °F)
Operation
20 to 80% RH
Storage
10 to 90% RH
a. Sound Pressure Level, ISO 7779. Configuration tested: machine basic installation, A4 paper, simplex printing.
Specifications_ 163
Electrical specifications
Power requirements are based on the country/region where the device is sold. Do not convert operating voltages. Doing so might damage the device and
void the product warranty.
Item
Power ratinga
Power consumption
Description
110 volt models
AC 110 - 127 V
220 volt models
AC 220 - 240 V
Average operating mode
Less than 1,100 W
Ready mode
Less than 250 W
Power save mode
Less than 3 W
Power off mode
Less than 0 W
a. see the rating label on the machine for the correct voltage, frequency (hertz), and type of current for your machine.
Specifications_ 164
Print media specifications
Type
Size
print media weight/Capacity (Simplex)a
Dimensions
tray1,2,3,4
Plain paper
Letter
216 x 279 mm (8.5 x 11 inches)
multipurpose tray
71 to 90 g/m2 (19 to 24 lb bond)
2
•
520 sheets of 80g/m (20 lb
bond) for each tray
•
2,000 sheets of 80g/m2 (20 lb
bond) for the high capacity
feeder
71 to 90 g/m2 (19 to 24 lb bond)
•
100 sheets of 80 g/m2 (20 lb
bond)
Ledger
279 x 432 mm (11 x 17 inches)
Legal
216 x 356 mm (8.5 x 14 inches)
Executive
184 x 267 mm (7.25 x 10.5 inches)
Statement
140 x 216 mm (5.5 x 8.5 inches)
A3
297 x 420 mm (11.7 x 16.5 inches)
A4
210 x 297 mm (8.26 x 11.7 inches)
A5
148 x 210 mm (5.82 x 8.26 inches)
B4
257 x 364 mm (10.1 x 14.3 inches)
JIS B5
182 x 257 mm (7.16 x 10.11 inches)
ISO B5
176 x 250 mm (6.93 x 9.84 inches)
US Folio
216 x 330 mm (8.5 x 13 inches)
Oficio
216 x 343 mm (8.5 x 13.5 inches)
8K
270 x 390 mm (10.75 x 15.5 inches)
16K
195 x 270 mm (7.76 x 10.75 inches)
A6
105 x 148 mm (4.13 x 5.82 inches)
Not available in tray1,2,3,4 / High
capacity feeder
Letter, Statement, A4,
A5, JIS B5, A6, ISO
B5
Refer to the Plain paper section
Not available in tray1,2,3,4 / High
capacity feeder
75 to 90 g/m2 (20 to 24 lb bond)
• 10 sheets stacking
Envelope Monarch
98 x 191 mm (3.87 x 7.5 inches)
Envelope No. 10
105 x 241 mm (4.12 x 9.5 inches)
Envelope No. 9
98 x 225 mm (3.87 x 8.87 inches)
Envelope DL
110 x 220 mm (4.33 x 8.66 inches)
Envelope C5
162 x 229 mm (6.37 x 9.01 inches)
Envelope C6
114 x 162 mm (4.48 x 6.38 inches)
Envelope C4
229 x 324 mm (9.01 x 12.75 inches)
Thick paper
Refer to the Plain
paper section
Refer to the Plain paper section
91 to 105 g/m2 (25 to 28 lb bond)
• 400 sheets for each tray
• 1,600 sheets for the high
capacity feeder
91 to 105 g/m2 (25 to 28 lb bond)
• 50 sheets stacking
Heavy weight
paper
Refer to the Plain
paper section
Refer to the Plain paper section
106 to 175 g/m2 (29 to 46 lb bond)
• 350 sheets stacking
• 1,400 sheets for the high
capacity feeder
106 to 175 g/m2 (29 to 46 lb bond)
• 20 sheets stacking
Extra Heavy
weight 1
Refer to the Plain
paper section
Refer to the Plain paper section
176 to 216 g/m2 (47 to 57 lb bond)
• 200 sheets stacking
• Not available in the high
capacity feeder
176 to 216 g/m2 (47 to 57 lb bond)
• 10 sheets stacking
Envelope
A3 and 8K are not
supported in Tray1.
Specifications_ 165
Type
Size
print media weight/Capacity (Simplex)a
Dimensions
tray1,2,3,4
multipurpose tray
Extra Heavy
weight 2
Refer to the Plain
paper section
Refer to the Plain paper section
Not available in tray1,2,3,4 / High
capacity feeder
217 to 253 g/m2 (58 to 67 lb bond)
• 10 sheets stacking
Thin paper
Refer to the Plain
paper section
Refer to the Plain paper section
60 to 70 g/m2 (16 to 18 lb bond)
• 520 sheets stacking
• 2,000 sheets for the high
capacity feeder
60 to 70 g/m2 (16 to 18 lb bond)
• 100 sheets stacking
Cotton
Refer to the Plain
paper section
Refer to the Plain paper section
75 to 90 g/m2 (20 to 24 lb bond)
• 400 sheets stacking
• 1,600 sheets for the high
capacity feeder
75 to 90 g/m2 (20 to 24 lb bond)
• 50 sheets stacking
Colored /
Pre-Printed
Refer to the Plain
paper section
Refer to the Plain paper section
75 to 90 g/m2 (20 to 24 lb bond)
• 400 sheets stacking
• 1,600 sheets for the high
capacity feeder
75 to 90 g/m2 (20 to 24 lb bond)
• 50 sheets stacking
Recycled
Refer to the Plain
paper section
Refer to the Plain paper section
60 to 90 g/m2 (16 to 24 lb bond)
• 400 sheets stacking
• 1,600 sheets for the high
capacity feeder
60 to 90 g/m2 (16 to 24 lb bond)
• 100 sheets stacking
Thin cardstock
Refer to the Plain
paper section
Refer to the Plain paper section
105 to 163 g/m2 (28 to 43 lb bond)
• 350 sheets stacking
• 1,400 sheets for the high
capacity feeder
105 to 163 g/m2 (28 to 43 lb bond)
• 20 sheets stacking
Thick
cardstock
Refer to the Plain
paper section
Refer to the Plain paper section
170 to 216 g/m2 (45 to 57 lb bond)
• 350 sheets stacking
• Not available in the high
capacity feeder
170 to 216 g/m2 (45 to 57 lb bond)
• 20 sheets stacking
Thin glossy
Refer to the Plain
paper section
Refer to the Plain paper section
Not available in tray1,2,3,4 / High
capacity feeder
106 to 169 g/m2 (28 to 45 lb bond)
• 20 sheets stacking
Thick glossy
Refer to the Plain
paper section
Refer to the Plain paper section
Not available in tray1,2,3,4 / High
capacity feeder
170 to 253 g/m2 (45 to 67 lb bond)
• 10 sheets stacking
Labelsb
Letter, A4
Refer to the Plain paper section
Postcard
PostCard 4 x 6
101.6 x 152.4 mm (4 x 6 inches)
Not available in tray1,2,3,4 / High
capacity feeder
Tray 1 minimum size (custom)
139.7 x 210 mm (5.5 x 8.27 inches)
60 to 216 g/m2 (16 to 57 lb bond)
Tray 1 maximum size (custom)
257 x 364 mm (10.1 x 14.3 inches)
Tray 2,3,4 minimum size (custom)
139.7 x 210 mm (5.5 x 8.27 inches)
Tray 2,3,4 maximum size (custom)
305 x 457 mm (12 x 18 inches)
Multipurpose tray minimum size
(custom)
98 x 148 mm (3.87 x 5.82 inches)
Multipurpose tray maximum size
(custom)
297 x 1,200 mm (11.7x 47.2 inches)
120 to 150 g/m2 (32 to 40 lb bond)
• 20 sheets stacking
a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
Specifications_ 166
-
60 to 105 g/m2 (16 to 28 lb bond)
• 20 sheets stacking
-
60 to 253 g/m2 (16 to 67 lb bond)
b. The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness.
System requirements
Before you begin, make sure that your system meets the following requirements:
Windows
Your machine supports the following Windows operating systems.
Requirement (recommended)
OPERATING SYSTEM
CPU
RAM
free HDD space
Windows® 2000
Intel® Pentium® II 400 MHz (Pentium III 933 MHz)
64 MB (128 MB)
600 MB
Windows® XP
Intel® Pentium® III 933 MHz (Pentium IV 1 GHz)
128 MB (256 MB)
1.5 GB
Windows Server® 2003
Intel® Pentium® III 933 MHz (Pentium IV 1 GHrmz)
128 MB (512 MB)
1.25 GB to 2 GB
Windows Server® 2008
Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz)
512 MB (2048 MB)
10 GB
Windows Vista®
Intel® Pentium® IV 3 GHz
512 MB (1024 MB)
15 GB
Windows® 7
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher
1 GB (2 GB)
16 GB
512 MB
(2048 MB)
10 GB
•
•
Windows Server® 2008
R2
•
•
•
•
Support for DirectX® 9 graphics with 128 MB memory (to enable
the Aero theme).
DVD-R/W Drive
Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz
or faster)
Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.
Users who have administrator rights can install the software.
Windows Terminal Services is compatible with your machine.
For Windows 2000, Services Pack 4 or higher is required.
MAC
Requirements (recommended)
OPERATING SYSTEM
Mac OS X 10.4
CPU
RAM
1 GB
•
•
Intel™ processors
PowerPC G4/G5
•
Mac OS X 10.5
•
•
Intel™ processors
867 MHz or faster Power PC G4/G5
512 MB (1 GB)
1 GB
Mac OS X 10.6
•
Intel™ processors
1 GB (2 GB)
1 GB
Mac OS X 10.7
•
Intel™ processors
2 GB
4 GB
•
Specifications_ 167
128 MB for a powerPC based Mac
(512 MB)
512 MB for an Intel-based Mac (1 GB)
free HDD space
Linux
Item
Requirements
Operating system
Redhat™ Enterprise Linux WS 4, 5 (32/64 bit)
Fedora 5 ~ 13 (32/64 bit)
SuSE Linux 10.1 (32 bit)
OpenSuSE™ 10.2, 10.3, 11.0, 11.1, 11.2 (32/64 bit)
Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04 (32/64 bit)
SuSE Linux Enterprise Desktop 10, 11 (32/64 bit)
Debian 4.0, 5.0 (32/64 bit)
CPU
Pentium IV 2.4 GHz (IntelCore2)
RAM
512 MB (1024 MB)
Free HDD space
1 GB (2 GB)
UNIX
Item
Requirements
Operating system
Sun Solaris 9,10 (x86, SPARC)
HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)
IBM AIX 5.1, 5.2, 5.3, 5.4 (PowerPC)
Free HDD space
Up to 100 MB
Specifications_ 168
Contact samsung worldwide
If you have any comments or questions regarding Samsung products, contact the Samsung customer care center.
Country/Region
Customer Care Center
Web Site
Country/Region
Customer Care Center
Web Site
DOMINICA
1-800-751-2676
www.samsung.com
ECUADOR
1-800-10-7267
www.samsung.com
EGYPT
08000-726786
www.samsung.com
EIRE
0818 717100
www.samsung.com
EL SALVADOR
800-6225
www.samsung.com
ESTONIA
800-7267
www.samsung.com
www.samsung.com
FINLAND
030-6227 515
www.samsung.com
8000-4726
www.samsung.com
FRANCE
01 48 63 00 00
www.samsung.com
BELARUS
810-800-500-55-500
www.samsung.com
GERMANY
www.samsung.com
BELGIUM
02-201-24-18
www.samsung.com/be
(Dutch)
www.samsung.com/be
_fr (French)
01805 - SAMSUNG
(726-7864 € 0,14/min)
GEORGIA
8-800-555-555
www.samsung.com
GHANA
0800-10077
0302-200077
www.samsung.com
GREECE
80111-SAMSUNG (80111
726 7864) only from land
line
(+30) 210 6897691 from
mobile and land line
www.samsung.com
ALBANIA
42 27 5755
www.samsung.com
ARGENTINE
0800-333-3733
www.samsung.com
ARMENIA
0-800-05-555
www.samsung.com
AUSTRALIA
1300 362 603
www.samsung.com
AUSTRIA
0810-SAMSUNG
(7267864, € 0.07/min)
www.samsung.com
AZERBAIJAN
088-55-55-555
BAHRAIN
BOLIVIA
800-10-7260
www.samsung.com
BOSNIA
05 133 1999
www.samsung.com
BRAZIL
0800-124-421
4004-0000
www.samsung.com
BULGARIA
07001 33 11
www.samsung.com
GUATEMALA
1-800-299-0013
www.samsung.com
CAMEROON
7095-0077
www.samsung.com
HONDURAS
800-27919267
www.samsung.com
CANADA
1-800-SAMSUNG
(726-7864)
www.samsung.com/ca
www.samsung.com/ca
_fr (French)
HONG KONG
(852) 3698-4698
www.samsung.com/hk
www.samsung.com/hk
_en/
CHILE
800-SAMSUNG
(726-7864)
From mobile 02-482 82 00
www.samsung.com
HUNGARY
06-80-SAMSUNG
(726-7864)
www.samsung.com
CHINA
400-810-5858
www.samsung.com
INDIA
www.samsung.com
COLOMBIA
01-8000112112
www.samsung.com
COSTA RICA
0-800-507-7267
www.samsung.com
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
COTE D’LVOIRE
8000 0077
www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
www.samsung.com
CROATIA
062 SAMSUNG (062 726
7864)
www.samsung.com
IRAN
021-8255
www.samsung.com
CYPRUS
8009 4000 only from
landline
www.samsung.com
ITALY
800-SAMSUNG
(726-7864)
www.samsung.com
CZECH
REPUBLIC
800-SAMSUNG
(800-726786)
www.samsung.com
JAMAICA
1-800-234-7267
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
JORDAN
800-22273
www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500
(GSM:7799)
www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o.,
Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8
DENMARK
70 70 19 70
www.samsung.com
Contact SAMSUNG worldwide_ 169
Country/Region
Customer Care Center
KENYA
0800 724 000
KOSOVO
KUWAIT
Web Site
Country/Region
Customer Care Center
www.samsung.com
RUSSIA
+381 0113216899
www.samsung.com
SAUDI ARABIA
9200-21230
www.samsung.com
183-2255
www.samsung.com
SENEGAL
800-00-0077
www.samsung.com
KYRGYZSTAN
00-800-500-55-500
www.samsung.com
SERBIA
www.samsung.com
LATVIA
8000-7267
www.samsung.com
0700 SAMSUNG (0700
726 7864)
LITHUANIA
8-800-77777
www.samsung.com
SINGAPORE
1800-SAMSUNG
(726-7864)
www.samsung.com
LUXEMBURG
261 03 710
www.samsung.com
SLOVAKIA
1800-88-9999
www.samsung.com
0800-SAMSUNG
(0800-726-7864)
www.samsung.com
MALAYSIA
MACEDONIA
023 207 777
www.samsung.com
SOUTH AFRICA
www.samsung.com
MEXICO
01-800-SAMSUNG
(726-7864)
www.samsung.com
0860-SAMSUNG
(726-7864)
SPAIN
www.samsung.com
MOLDOVA
00-800-500-55-500
www.samsung.com
902-1-SAMSUNG(902
172 678)
SWEDEN
0771 726 7864
(SAMSUNG)
www.samsung.com
SWITZERLAND
0848-SAMSUNG
(7267864, CHF 0.08/min)
www.samsung.com/ch
www.samsung.com/ch
_fr(French)
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com
TAIWAN
0800-329-999
0266-026-066
www.samsung.com
TANZANIA
0685 88 99 00
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
TRINIDAD &
TOBAGO
1-800-SAMSUNG
(726-7864)
www.samsung.com
TURKEY
444 77 11
www.samsung.com
U.A.E
800-SAMSUNG
(726-7864)
www.samsung.com
UGANDA
0800-300 300
www.samsung.com
U.K
0330 SAMSUNG
(7267864)
www.samsung.com
U.S.A
1-800-SAMSUNG
(726-7864)
www.samsung.com
UKRAINE
0-800-502-000
www.samsung.com/ua
www.samsung.com/ua
_ru
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com
VENEZUELA
0-800-100-5303
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
MONGOLIA
www.samsung.com
MONTENEGRO
020 405 888
www.samsung.com
MOROCCO
080 100 2255
www.samsung.com
NIGERIA
0800-726-7864
www.samsung.com
NETHERLANDS
0900-SAMSUNG
(0900-7267864) (€
0,10/min)
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800
726 786)
www.samsung.com
NICARAGUA
00-1800-5077267
www.samsung.com
NORWAY
815-56 480
www.samsung.com
OMAN
800-SAMSUNG
(726-7864)
www.samsung.com
PANAMA
800-7267
www.samsung.com
PERU
0-800-777-08
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726
-7864) for PLDT
1-800-3-SAMSUNG(7267864) for Digitel
1-800-8-SAMSUNG(7267864) for Globe
02-5805777
www.samsung.com
0 801-1 SAMSUNG
(172-678)
+48 22 607-93-33
www.samsung.com
PORTUGAL
808 20-SAMSUNG (808
20 7267)
www.samsung.com
PUERTO RICO
1-800-682-3180
www.samsung.com
ROMANIA
08010 SAMSUNG (08010
726 7864) only from
landline
(+40) 21 206 01 10 from
mobile and land line
www.samsung.com
POLAND
Contact SAMSUNG worldwide_ 170
8-800-555-55-55
Web Site
www.samsung.com
Glossary
The following glossary helps you get familiar with the product by
understanding the terminologies commonly used with printing as well
as mentioned in this user’s guide.
CCD
Charge Coupled Device (CCD) is a hardware which enables the scan
job. CCD Locking mechanism is also used to hold the CCD module to
prevent any damage when you move the machine.
802.11
Collation
802.11 is a set of standards for wireless local area network (WLAN)
communication, developed by the IEEE LAN/MAN Standards
Committee (IEEE 802).
Collation is a process of printing a multiple-copy job in sets. When
collation is selected, the device prints an entire set before printing
additional copies.
802.11b/g
802.11b/g can share same hardware and use the 2.4 GHz band.
802.11b supports bandwidth up to 11 Mbps; 802.11g up to 54 Mbps.
802.11b/g devices may occasionally suffer interference from microwave
ovens, cordless telephones, and Bluetooth devices.
Control Panel
Access point
Coverage
Access Point or Wireless Access Point (AP or WAP) is a device that
connects wireless communication devices together on wireless local
area networks (WLAN), and acts as a central transmitter and receiver of
WLAN radio signals.
A control panel is a flat, typically vertical, area where control or
monitoring instruments are displayed. They are typically found in front of
the machine.
It is the printing term used for a toner usage measurement on printing.
For example, 5% coverage means that an A4 sided paper has about 5%
image or text on it. So, if the paper or original has complicated images or
lots of text on it, the coverage will be higher and at the same time, a
toner usage will be as much as the coverage.
ADF
CSV
An Automatic Document Feeder (ADF) is a scanning unit that will
automatically feed an original sheet of paper so that the machine can
scan some amount of the paper at once.
Comma Separated Values (CSV). A type of file format, CSV is used to
exchange data between disparate applications. The file format, as it is
used in Microsoft Excel, has become a de facto standard throughout the
industry, even among non-Microsoft platforms.
AppleTalk
AppleTalk is a proprietary suite of protocols developed by Apple, Inc for
computer networking. It was included in the original MAC (1984) and is
now deprecated by Apple in favor of TCP/IP networking.
BIT Depth
A computer graphics term describing the number of bits used to
represent the color of a single pixel in a bitmapped image. Higher color
depth gives a broader range of distinct colors. As the number of bits
increases, the number of possible colors becomes impractically large for
a color map. 1-bit color is commonly called as monochrome or black and
white.
DADF
A Duplex Automatic Document Feeder (DADF) is a scanning unit that
will automatically feed and turn over an original sheet of paper so that
the machine can scan on both sides of the paper.
Default
The value or setting that is in effect when taking a printer out of its box
state, reset, or initialized.
DHCP
A bitmapped graphics format used internally by the Microsoft Windows
graphics subsystem (GDI), and used commonly as a simple graphics file
format on that platform.
A Dynamic Host Configuration Protocol (DHCP) is a client-server
networking protocol. A DHCP server provides configuration parameters
specific to the DHCP client host requesting, generally, information
required by the client host to participate on an IP network. DHCP also
provides a mechanism for allocation of IP addresses to client hosts.
BOOTP
DIMM
BMP
Bootstrap Protocol. A network protocol used by a network client to
obtain its IP address automatically. This is usually done in the bootstrap
process of computers or operating systems running on them. The
BOOTP servers assign the IP address from a pool of addresses to each
client. BOOTP enables 'diskless workstation' computers to obtain an IP
address prior to loading any advanced operating system.
Glossary_ 171
Dual Inline Memory Module (DIMM), a small circuit board that holds
memory. DIMM stores all the data within the machine like printing data,
received fax data.
DLNA
Ethernet
The Digital Living Network Alliance (DLNA) is a standard that allows
devices on a home network to share information with each other across
the network.
Ethernet is a frame-based computer networking technology for local
area networks (LANs). It defines wiring and signaling for the physical
layer, and frame formats and protocols for the media access control
(MAC)/data link layer of the OSI model. Ethernet is mostly standardized
as IEEE 802.3. It has become the most widespread LAN technology in
use during the 1990s to the present.
DNS
The Domain Name Server (DNS) is a system that stores information
associated with domain names in a distributed database on networks,
such as the Internet.
Dot Matrix Printer
A dot matrix printer refers to a type of computer printer with a print head
that runs back and forth on the page and prints by impact, striking an
ink-soaked cloth ribbon against the paper, much like a typewriter.
DPI
Dots Per Inch (DPI) is a measurement of resolution that is used for
scanning and printing. Generally, higher DPI results in a higher
resolution, more visible detail in the image, and a larger file size.
EtherTalk
A suite of protocols developed by Apple Computer for computer
networking. It was included in the original MAC (1984) and is now
deprecated by Apple in favor of TCP/IP networking.
FDI
Foreign Device Interface (FDI) is a card installed inside the machine to
allow a third party device such as a coin operated device or a card
reader. Those devices allow the pay-for-print service on your machine.
FTP
DRPD
Distinctive Ring Pattern Detection. Distinctive Ring is a telephone
company service which enables a user to use a single telephone line to
answer several different telephone numbers.
Duplex
A mechanism that will automatically turn over a sheet of paper so that
the machine can print (or scan) on both sides of the paper. A printer
equipped with a Duplex Unit can print on both sides of paper during one
print cycle.
Duty Cycle
Duty cycle is the page quantity which does not affect printer
performance for a month. Generally the printer has the lifespan limitation
such as pages per year. The lifespan means the average capacity of
print-outs, usually within the warranty period. For example, if the duty
cycle is 48,000 pages per month assuming 20 working days, a printer
limits 2,400 pages a day.
ECM
A File Transfer Protocol (FTP) is a commonly used protocol for
exchanging files over any network that supports the TCP/IP protocol
(such as the Internet or an intranet).
Fuser Unit
The part of a laser printer that fuses the toner onto the print media. It
consists of some parts such as a heating parts and a pressure roller.
After toner is transferred onto the paper, the fuser unit applies heat and
pressure to ensure that the toner stays on the paper permanently, which
is why paper is warm when it comes out of a laser printer.
Gateway
A connection between computer networks, or between a computer
network and a telephone line. It is very popular, as it is a computer or a
network that allows access to another computer or network.
Grayscale
A shades of gray that represent light and dark portions of an image
when color images are converted to grayscale; colors are represented
by various shades of gray.
Error Correction Mode (ECM) is an optional transmission mode built into
Class 1 fax machines or fax modems. It automatically detects and
corrects errors in the fax transmission process that are sometimes
caused by telephone line noise.
Halftone
Emulation
HDD
Emulation is a technique of one machine obtaining the same results as
another.
An emulator duplicates the functions of one system with a different
system, so that the second system behaves like the first system.
Emulation focuses on exact reproduction of external behavior, which is
in contrast to simulation, which concerns an abstract model of the
system being simulated, often considering its internal state.
Hard Disk Drive (HDD), commonly referred to as a hard drive or hard
disk, is a non-volatile storage device which stores digitally-encoded data
on rapidly rotating platters with magnetic surfaces.
Glossary_ 172
An image type that simulates grayscale by varying the number of dots.
Highly colored areas consist of a large number of dots, while lighter
areas consist of a smaller number of dots.
IEEE
The Institute of Electrical and Electronics Engineers (IEEE) is an
international non-profit, professional organization for the advancement
of technology related to electricity.
IEEE 1284
ITU-T No. 1 chart
The 1284 parallel port standard was developed by the Institute of
Electrical and Electronics Engineers (IEEE). The term "1284-B" refers to
a specific connector type on the end of the parallel cable that attaches to
the peripheral (for example, a printer).
Standardized test chart published by ITU-T for document facsimile
transmissions.
Intranet
A private network that uses Internet Protocols, network connectivity, and
possibly the public telecommunication system to securely share part of
an organization's information or operations with its employees.
Sometimes the term refers only to the most visible service, the internal
website.
IP address
An Internet Protocol (IP) address is a unique number that devices use in
order to identify and communicate with each other on a network utilizing
the Internet Protocol standard.
IPM
The Images Per Minute (IPM) is a way of measuring the speed of a
printer. An IPM rate indicates the number of single-sided sheets a printer
can complete within one minute.
IPP
The Internet Printing Protocol (IPP) defines a standard protocol for
printing as well as managing print jobs, media size, resolution, and so
forth. IPP can be used locally or over the Internet to hundreds of
printers, and also supports access control, authentication, and
encryption, making it a much more capable and secure printing solution
than older ones.
IPX/SPX
IPX/SPX stands for Internet Packet Exchange/Sequenced Packet
Exchange. It is a networking protocol used by the Novell NetWare
operating systems. IPX and SPX both provide connection services
similar to TCP/IP, with the IPX protocol having similarities to IP, and
SPX having similarities to TCP. IPX/SPX was primarily designed for
local area networks (LANs), and is a very efficient protocol for this
purpose (typically its performance exceeds that of TCP/IP on a LAN).
JBIG
Joint Bi-level Image Experts Group (JBIG) is an image compression
standard with no loss of accuracy or quality, which was designed for
compression of binary images, particularly for faxes, but can also be
used on other images.
JPEG
Joint Photographic Experts Group (JPEG) is a most commonly used
standard method of lossy compression for photographic images. It is the
format used for storing and transmitting photographs on the World Wide
Web.
LDAP
The Lightweight Directory Access Protocol (LDAP) is a networking
protocol for querying and modifying directory services running over
TCP/IP.
LED
A Light-Emitting Diode (LED) is a semiconductor device that indicates
the status of a machine.
MAC address
Media Access Control (MAC) address is a unique identifier associated
with a network adapter. MAC address is a unique 48-bit identifier usually
written as 12 hexadecimal characters grouped in pairs (e. g.,
00-00-0c-34-11-4e). This address is usually hard-coded into a Network
Interface Card (NIC) by its manufacturer, and used as an aid for routers
trying to locate machines on large networks.
MFP
Multi Function Peripheral (MFP) is an office machine that includes the
following functionality in one physical body, so as to have a printer, a
copier, a fax, a scanner and etc.
MH
ISO
The International Organization for Standardization (ISO) is an
international standard-setting body composed of representatives from
national standards bodies. It produces world-wide industrial and
commercial standards.
ITU-T
The International Telecommunication Union is an international
organization established to standardize and regulate international radio
and telecommunications. Its main tasks include standardization,
allocation of the radio spectrum, and organizing interconnection
arrangements between different countries to allow international phone
calls. A -T out of ITU-T indicates telecommunication.
Glossary_ 173
Modified Huffman (MH) is a compression method for decreasing the
amount of data that needs to be transmitted between the fax machines
to transfer the image recommended by ITU-T T.4. MH is a
codebook-based run-length encoding scheme optimized to efficiently
compress white space. As most faxes consist mostly of white space, this
minimizes the transmission time of most faxes.
MMR
Modified Modified READ (MMR) is a compression method
recommended by ITU-T T.6.
Modem
A device that modulates a carrier signal to encode digital information,
and also demodulates such a carrier signal to decode transmitted
information.
MR
Printer Driver
Modified Read (MR) is a compression method recommended by ITU-T
T.4. MR encodes the first scanned line using MH. The next line is
compared to the first, the differences determined, and then the
differences are encoded and transmitted.
A program used to send commands and transfer data from the computer
to the printer.
Print Media
The media like paper, envelopes, labels, and transparencies which can
be used in a printer, a scanner, a fax or, a copier.
NetWare
A network operating system developed by Novell, Inc. It initially used
cooperative multitasking to run various services on a PC, and the
network protocols were based on the archetypal Xerox XNS stack.
Today NetWare supports TCP/IP as well as IPX/SPX.
PPM
Pages Per Minute (PPM) is a method of measurement for determining
how fast a printer works, meaning the number of pages a printer can
produce in one minute.
OPC
Organic Photo Conductor (OPC) is a mechanism that makes a virtual
image for print using a laser beam emitted from a laser printer, and it is
usually green or rust colored and has a cylinder shape.
An imaging unit containing a drum slowly wears the drum surface by its
usage in the printer, and it should be replaced appropriately since it gets
worn from contact with the cartridge development brush, cleaning
mechanism, and paper.
PRN file
An interface for a device driver, this allows software to interact with the
device driver using standard input/output system calls, which simplifies
many tasks.
Protocol
A convention or standard that controls or enables the connection,
communication, and data transfer between two computing endpoints.
Originals
The first example of something, such as a document, photograph or text,
etc, which is copied, reproduced or translated to produce others, but
which is not itself copied or derived from something else.
OSI
Open Systems Interconnection (OSI) is a model developed by the
International Organization for Standardization (ISO) for communications.
OSI offers a standard, modular approach to network design that divides
the required set of complex functions into manageable, self-contained,
functional layers. The layers are, from top to bottom, Application,
Presentation, Session, Transport, Network, Data Link and Physical.
PABX
A private automatic branch exchange (PABX) is an automatic telephone
switching system within a private enterprise.
PCL
Printer Command Language (PCL) is a Page Description Language
(PDL) developed by HP as a printer protocol and has become an
industry standard. Originally developed for early inkjet printers, PCL has
been released in varying levels for thermal, dot matrix printer, and laser
printers.
PDF
Portable Document Format (PDF) is a proprietary file format developed
by Adobe Systems for representing two dimensional documents in a
device independent and resolution independent format.
PS
see PostScript.
PSTN
The Public-Switched Telephone Network (PSTN) is the network of the
world's public circuit-switched telephone networks which, on industrial
premises, is usually routed through the switchboard.
RADIUS
Remote Authentication Dial In User Service (RADIUS) is a protocol for
remote user authentication and accounting. RADIUS enables
centralized management of authentication data such as usernames and
passwords using an AAA (authentication, authorization, and accounting)
concept to manage network access.
Resolution
The sharpness of an image, measured in Dots Per Inch (DPI). The
higher the dpi, the greater the resolution.
SMB
Server Message Block (SMB) is a network protocol mainly applied to
share files, printers, serial ports, and miscellaneous communications
between nodes on a network. It also provides an authenticated
Inter-process communication mechanism.
SMTP
PostScript
PostScript (PS) is a page description language and programming
language used primarily in the electronic and desktop publishing areas. that is run in an interpreter to generate an image.
Glossary_ 174
Simple Mail Transfer Protocol (SMTP) is the standard for e-mail
transmissions across the Internet. SMTP is a relatively simple,
text-based protocol, where one or more recipients of a message are
specified, and then the message text is transferred. It is a client-server
protocol, where the client transmits an email message to the server.
SSID
USB
Service Set Identifier (SSID) is a name of a wireless local area network
(WLAN). All wireless devices in a WLAN use the same SSID in order to
communicate with each other. The SSIDs are case-sensitive and have a
maximum length of 32 characters.
Universal Serial Bus (USB) is a standard that was developed by the
USB Implementers Forum, Inc., to connect computers and peripherals.
Unlike the parallel port, USB is designed to concurrently connect a
single computer USB port to multiple peripherals.
Subnet Mask
Watermark
The subnet mask is used in conjunction with the network address to
determine which part of the address is the network address and which
part is the host address.
A watermark is a recognizable image or pattern in paper that appears
lighter when viewed by transmitted light. Watermarks were first
introduced in Bologna, Italy in 1282; they have been used by
papermakers to identify their product, and also on postage stamps,
currency, and other government documents to discourage
counterfeiting.
TCP/IP
The Transmission Control Protocol (TCP) and the Internet Protocol (IP);
the set of communications protocols that implement the protocol stack
on which the Internet and most commercial networks run.
TCR
Transmission Confirmation Report (TCR) provides details of each
transmission such as job status, transmission result and number of
pages sent. This report can be set to print after each job or only after
failed transmissions.
WEP
Wired Equivalent Privacy (WEP) is a security protocol specified in IEEE
802.11 to provide the same level of security as that of a wired LAN. WEP
provides security by encrypting data over radio so that it is protected as
it is transmitted from one end point to another.
WIA
TIFF
Tagged Image File Format (TIFF) is a variable-resolution bitmapped
image format. TIFF describes image data that typically come from
scanners. TIFF images make use of tags, keywords defining the
characteristics of the image that is included in the file. This flexible and
platform-independent format can be used for pictures that have been
made by various image processing applications.
Toner Cartridge
A kind of bottle or container used in a machine like a printer which
contains toner. Toner is a powder used in laser printers and
photocopiers, which forms the text and images on the printed paper.
Toner can be fused by by a combination of heat/pressure from the fuser,
causing it to bind to the fibers in the paper.
TWAIN
An industry standard for scanners and software. By using a
TWAIN-compliant scanner with a TWAIN-compliant program, a scan can
be initiated from within the program. It is an image capture API for
Microsoft Windows and Apple MAC operating systems.
UNC Path
Uniform Naming Convention (UNC) is a standard way to access network
shares in Window NT and other Microsoft products. The format of a
UNC path is: \\<servername>\<sharename>\<Additional directory>
URL
Uniform Resource Locator (URL) is the global address of documents
and resources on the Internet. The first part of the address indicates
what protocol to use, the second part specifies the IP address or the
domain name where the resource is located.
Glossary_ 175
Windows Imaging Architecture (WIA) is an imaging architecture that is
originally introduced in Windows Me and Windows XP. A scan can be
initiated from within these operating systems by using a WIA-compliant
scanner.
WPA
Wi-Fi Protected Access (WPA) is a class of systems to secure wireless
(Wi-Fi) computer networks, which was created to improve upon the
security features of WEP.
WPA-PSK
WPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small
business or home users. A shared key, or password, is configured in the
wireless access point (WAP) and any wireless laptop or desktop
devices. WPA-PSK generates a unique key for each session between a
wireless client and the associated WAP for more advanced security.
WPS
The Wi-Fi Protected Setup (WPS) is a standard for establishing a
wireless home network. If your wireless access point supports WPS, you
can configure the wireless network connection easily without a
computer.
XPS
XML Paper Specification (XPS) is a specification for a Page Description
Language (PDL) and a new document format, which has benefits for
portable document and electronic document, developed by Microsoft. It
is an XML-based specification, based on a new print path and a
vector-based device-independent document format.
Index
A
address book 95
accessories
installing 161
ordering 161
address book
SyncThru Web Service 96
AnyWeb Print 119
delay sending 69
redialing the last number 69
sending a fax 68
direct printing utility 109
display screen 30
divice options 106
document box
understanding the document box screen
92
adjusting background
copying 62
fax sending
fax, email
individual address 94
faxing
adjusting darkness 73, 72
changing receiving mode 70
delaying a fax transmission 69
preparing to fax 65, 73, 74
receiving 70, 71, 70, 69
selecting the orientation of originals 72,
71, 68, 71, 68
understanding the fax screen 67
document feeder 38
duplex printing
copy 71
print 107
B
buttons
Counter 35
ECO 35
Interrrupt 37
Job Status 36
C
duplex sending
faxing 71
scanning 82
E
features 23
machine features 163
print media feature 165, 100
file format
scanning 84
easy document creator 121
configuration 122
device name 122
e-book conversion 122
plug-in 123
quick scan 121, 122
scan 121, 122, 123
SNS scanning 122
color mode
scanning 83
connect
network cable 34
printer cable 34
control panel 30
copying
adjusting background images 62, 54
basic copying 51, 60
changing color 53, 52
erasing backside images 63
ID card copy 56
n-up copy 57
programs setting 64
reducing or enlarging copies 52
selecting the orientation of originals 55,
52, 55, 62
understanding the copy screen 50
watermark 61
D
group address 95
individual address 95
erasing background
setting a fax header 68
tray setting 47
deleting
front view 1 25
front view 2 26
glossary 171
group
group address 95
copying 63
scanning 83
erasing backside
scanning 84
error message 145
H
hard disk 24
help, use 106
extension telephone 70
I
F
ID copy 56
favorites settings, for printing 105
imaging unit
replacing imaging unit 129
fax receiving
default settings
scanning 84
G
editing
convention 21
file policy
changing the receive mode 70
extension telephone 70
in answering machine/fax 71
receiving in duplex 71
secure receiving 70, 71
Index_ 176
information 9
inner view 28, 29
J
original orientation
copying 55
faxing 72
scanning 82
jam
clearing paper 137
tips for avoiding paper jams 136
JPEG
USB scanning memory device 84, 85, 95,
96
interrupt button 37
machine status 32
understanding the status LED 31, 32
Linux 113
Macintosh 110
UNIX 114
faxing 71
original type
copying 55
faxing 73
scanning 83
loading
in the document feeder 38
originals on the scanner glass 38
paper in multi-purpose tray 42, 39
special media 44
M
Macintosh
common Macintosh problems 159
printing 110
scanning 86, 167
managing USB memory 118
multi-purpose tray
loading 42
tips on using 42
using special media 44
create 108
delete 109
print 109
N-up copy 57
N-up printing
Macintosh 113
Windows 106
O
optional tray
loading paper 39
ordering 161
original document
clearing jam 133
loading
in the document feeder 38
on the scanner glass 38
copying problems 155
paper feeding problems 151, 150, 153
touch screen 150
Q
quality
scanning 84
P
quick copy 64
paper supply tray
copying 52
poster, print 107
PostScript driver
troubleshooting 157
print media
card stock 46
envelope 45
glossy 46, 39
labels 45, 46
output support 165
paper tab in printer preferences 102
setting the paper size 47, 44
R
rear view 27
regulatiory information 14
reports
email confirmation report 78
fax report 73
requirements
Linux 168
Macintosh 167
system 167
Unix 168
Windows 167
print resolution set
resolution
Linux 114
faxing 72
scanning 81
print resolution, set
Macintosh 111
printer preferences
Linux 114
N
problems
overlay printing
Linux
common Linux problems 158
printer properties 114, 113
scanning 87, 168
unifled driver configurator 123
printing a document
original size
L
LED
110
UNIX 114
using direct printing utility 109, 108
printer properties
opening printer preferences 101
printer status
general information 120
printing
changing the default print settings 110,
107
fitting your document to a selected paper
size 107
Linux 113
Macintosh 110
multiple pages on one sheet of paper
Macintosh 113
Windows 106
poster 107
Windows 101
Macintosh 113
Windows 107
Index_ 177
S
safety
information 9
symbols 9
Samsung Printer Status 120
scan to email 77
scan to server 78
scanner
glass 38
loading documents 38
scanner glass
loading documents 38
scanning
2 sided originals 82
adjusting darkness 81
basic information 76
changing settings 81
erasing backside images 84
file format 84
to email 77, 78
job completion notification 85
Linux 87
Macintosh 86
programs setting 74, 85
resolution 81
scan quality 84, 82, 83
TWAIN 86
searching
address book 95
service contact numbers 169
setting up an address book
from a control panel 94
shared folder 91
USB memory device
how to scan 80
printing 117
W
waste toner container
replacing waste toner container 132
watermark
create 108
delete 108
edit 108
print 108
Windows
common Windows problems 157
printing 100
scanning 76, 167
SMB, FTP
individual address 94
specifications
general 163
print media 165
stop button 30
supplies
available supplies 160
ordering 160
T
to USB memory device 80, 81
toner cartridge
redistributing toner 125, 126
touch screen
problem solving 150
tray
loading paper in multi-purpose tray 42
ordering an optional tray 161
setting the paper size and type 47
TWAIN, scan 86
U
understanding the fax screen 67
understanding the scan screen 76
UNIX
printing 114
system requirements 168
usb
understanding the usb screen 116
USB memory
how to manage 118
Index_ 178