Premier Mounts VPM mounting kit Specification

Add to my manuals
14 Pages

advertisement

Premier Mounts VPM mounting kit Specification | Manualzz
INSTALLATION INSTRUCTIONS
VPM
VESA Pole Mount
NORTH AMERICA
1321 S. State College Boulevard
Fullerton, CA 92831 USA
USA and Canada
Phone: 1.800.368.9700
Fax: 1.800.832.4888
Other Locations
Phone: (001).714.632.7100
Fax: (001).714.632.1044
EUROPE
Unit 3, The Moorings Business Park,
Channel Way, Longford,
Coventry, CV6 6RH, UK
Phone: +44 (0)24 7664 4105
Fax: +44 (0)24 7664 4165
9531-057-001-05
VPM
Contents
Weight Limit............................................................................................................................................................... 2
Warning Statements.................................................................................................................................................. 2
Installation Tools........................................................................................................................................................ 3
Parts List................................................................................................................................................................... 3
Features.................................................................................................................................................................... 5
Opening the Collar Clasp.......................................................................................................................................... 6
Installing the Fixed Tilt Adapters (Optional)............................................................................................................... 6
Selecting the Mounting Hardware............................................................................................................................. 7
Universal Spacer Installation (Optional).................................................................................................................... 7
Installing the Adapter Plate (Optional)....................................................................................................................... 8
Attaching the Flat-Panel to the VPM Mount............................................................................................................ 10
Attaching the VPM Mount to a Pole........................................................................................................................ 11
Adjusting the VPM Mount Tension........................................................................................................................... 12
Installing Multiple VPM (Optional)........................................................................................................................... 12
Technical Specifications.......................................................................................................................................... 13
Warranty.................................................................................................................................................................. 14
Weight Limit
Maximum Flat Panel Weight:
50 lbs.
Warning Statements
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND
COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION
FOR FUTURE REFERENCE.
PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED
IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS
PERSONAL INJURY, OR EVEN DEATH.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE
PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS
PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY
UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS,
DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR
IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
At least two qualified people should perform the assembly procedure. Personal injury and/or property damage can result
from dropping or mishandling the flat panel.
Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there
are no electrical wires in wall. Cutting or drilling into an electrical line may cause serious personal injury.
Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cutting or drilling into a
water or gas line may cause severe property damage or personal injury.
This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious
personal injury.
Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of
impact.
Contact Premier Mounts with any questions:
(800) 368-9700
[email protected]
Page 2
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
VPM
Installation Tools
The following tool may be required depending on your installation.
Phillips Tip Screwdriver
Parts List
Make sure none of the Premier Mounts parts are missing and/or damaged before beginning installation. If there are,
stop the installation and call Premier Mounts at (800) 368-9700.
VPM Components
VESA Pole Mount (Qty 1)
Universal Spacer
(Qty 8)
Installation Instructions
Adapter Plate (Qty 1)
Fixed Tilt Adapter - Left Fixed Tilt Adapter - Right
(Qty 1)
(Qty 1)
M5 Allen Wrench (Qty 1)
Visit the Premier Mounts website at www.mounts.com
Thread Depth
Indicator (Qty 1)
Page 3
VPM
Parts List (cont’d)
Mounting Hardware
Lock-It™ Security Hardware Pack
Your mount comes with the option of using Lock-It™ Security Screws. Simply replace any of the Phillips
head screws with the corresponding sized Lock-It™ Security Screws and tighten using the included Allen
wrench.
When you see the graphics below associated with a step, you have the option of using the standard mounting hardware or the Lock-It Security hardware.
Standard Hardware
Lock-It™ Security Hardware
M4 x 10mm Flat Screw
(Qty 6)
M8 x 40mm Security Screw
(Qty 2)
M4 x 16mm Flat Screw
(Qty 6)
M8 x 60mm Security Screw
(Qty 2)
M4 x 5mm Pan Combo Screw
(Qty 4)
M4 x 6mm Pan Combo Screw
(Qty 4)
M4 x 10mm Pan Combo Screw
(Qty 4)
M5 x 10mm Pan Combo Screw
(Qty 4)
M5 x 16mm Pan Combo Screw
(Qty 4)
M6 x 10mm Pan Combo Screw
(Qty 4)
M6 x 16mm Pan Combo Screw
(Qty 4)
M8 x 12mm Pan Combo Screw
(Qty 4)
M8 x 16mm Pan Combo Screw
(Qty 4)
Page 4
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
VPM
Features
The VPM VESA Pole Mount packs many features that make it one of the best mounts for flat-panels up to 32”. Its
attachment head uses a 100 x 100mm VESA mounting pattern to fit a majority of flat-panels (from 75 x 75mm to
200 x 200mm when combined with the optional adapter plate). For the optimal viewing angle, adjust the mount using
its Radial Glide® feature, which offers up to 12° (22° with optional tilt adapters) of smooth adjustment in any direction.
The VPM fits 1-1/2” and 2” tubing, as well as Premier Mounts’ own elliptical tubing, for carts, stands and ceiling
poles. The mount’s unique collar clasp design allows you to combine VPMs on a pole for back-to-back flat-panel
installations.
The VPM also includes both traditional screws and Lock-It™ security hardware for every installation scenario.
Adjustable Tension
Your flat panel stays at the
angle you choose even
when using a heavy display
by tightening the integrated
set screws.
Fits Many Pipes
The collar clasp can
be adjusted to fit 1-1/2”
and 2” tubing, as well
as Premier Mounts’
own elliptical tubing.
Stylish Design
Sleek and unobtrusive, yet sturdy.
Radial Glide Technology™
360° rotation and 12° of pivot
allows for superior viewing of your
flat-panel.
Installation Instructions
Visit the Premier Mounts website at www.mounts.com
Page 5
VPM
Opening the Collar Clasp
Remove the M8 x 40mm hex screws from the sides of
the VPM to open the collar clasp and begin installation.
Proceed to the “Installing the Fixed Tilt Adapters
(Optional)” section.
M8 x 40mm Hex
Screw
Installing the Fixed Tilt Adapters (Optional)
Are you using fixed tilt adapters for an additional
10° of tilt?
If Yes, choose an option:
•If mounting directly to the flat-panel, insert
four (4) M4 x 10mm screws from behind the
front holes of the fixed tilt adapters and into
the 100 x 100mm pattern of the flat-panel
(see page 14).
•If using an adapter plate, insert
four (4) M4 x 5mm screws from behind the
front holes of the fixed tilt adapters and into
the 100 x 100mm pattern of the adapter plate
(see page 14).
Flat-Panel or
Adapter Plate
If No, go to the “Selecting the Mounting
Hardware” section.
Do not overtighten the mounting hardware.
You can also attach the fixed tilt adapters upside
down, i.e., for an upward tilt on a floor stage
monitor stand.
Proceed to the “Selecting the Mounting Hardware”
section.
Page 6
M4 x 10mm or
M4 x 5mm screw
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
VPM
Selecting the Mounting Hardware
1) Insert a small straw or toothpick into the threaded
inserts found on the back of the flat-panel.
2) Use a pencil to mark the depth of the threaded insert
on the small straw or toothpick.
3) Mark the straw or toothpick 1/8” above the depth of
the threaded insert, as shown in Figure 1.
4) Insert the small straw or toothpick into the remaining
threaded inserts to compare and verify their depth
using the straw or toothpick’s 1/8” allowance mark.
5) Locate the correct diameter screw for the threaded
insert.
If the screw you selected is longer than the 1/8”
allowance mark on the small straw or toothpick,
as shown in Figure 2 and Figure 3, do not use this
screw. The screw length must not bypass the mark.
6) Test each size of the screws provided.
Markingthe1/8”
Allowance
The correct screws should thread easily into the
mounting point and not pull out when tension is
applied.
Small Straw or Toothpick
Proceed to the “Universal Spacer Installation
(Optional)” section.
Small Straw
or Toothpick
DepthPlus1/8” Allowance
Mark
Small Straw
or Toothpick
DepthPlus1/8” Allowance
Mark
Universal Spacer Installation (Optional)
If your flat-panel has uneven mounting points,
or recessed mounting points, please use the
provided universal spacers.
The universal spacer may be stacked six (1) high. It will
fit M4, M5, M6 and M8 screws sizes.
The universal spacers must be placed between the
attachment head/adapter plate and the
flat-panel.
The universal spacers must be stacked in the direction
shown to the right.
Proceed to the “Installing the Adapter Plate
(Optional)” section.
Installation Instructions
Visit the Premier Mounts website at www.mounts.com
Page 7
VPM
Installing the Adapter Plate (Optional)
What is the VESA pattern on your flat-panel?
•If 75 x 75mm or 200 x 200mm, proceed to the 75 x 75mm or 200 x 200mm section.
•If 200 x 100mm, go to the 200 x 100mm section on page 9.
•If 100 x 100mm, go to the “Attaching the Flat-Panel to the VPM Mount” section on page 10.
The adapter plate has a 100mm x 100mm VESA pattern, but that is only for attaching the plate to the
attachment head of the VPM.
75 x 75mm or 200 x 200mm
If you have a recessed mounting pattern, use
the universal spacers to compensate for the
indentation.
Optional fixed tilt adapters not shown.
Attach the Adapter Plate to the back of the flat panel
using the appropriate mounting hardware.
If you are using M4 or M5 screws, you must
also use M4 or M5 washers.
Figure 1 shows a flat-panel using the
200mm x 200mm pattern. See Figure 2 for
the 75mm x 75mm pattern (marked E).
Go to the “Attaching the Flat-Panel to the VPM
Mount” section.
Washer
Adapter Universal
Spacer
Plate
FlatPanel
Mounting
Hardware
Figure 1
E
E
E
E
Figure 2
Page 8
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
VPM
Installing the Adapter Plate (cont’d)
200 x 100mm
Optional fixed tilt adapters not shown.
If you have a recessed mounting pattern, use
the universal spacers to compensate for the
indentation.
Attach the VESA Adapter Plate to the back of the
flat panel using six (6) M4 flat head screws
(Figure 1).
See Figure 2 for a clearer view of the 200mm x
100mm pattern (marked B).
200mm x 100mm Mounting Pattern
Installation
If using a 200 x 100mm mounting pattern
to attach the VPM to your-flat panel, you must
use six (6) M4 flat head screws. Using pan
combo screws for the 200mm x 100mm VESA
plate may damage your flat panel.
Proceed to the “Attaching the Flat-Panel to the
VPM Mount” section.
Universal
Spacer
FlatPanel
Adapter
Plate
M4 Flat
Head
Screw
Figure 1
B
B
B
B
B
B
Figure 2
Installation Instructions
Visit the Premier Mounts website at www.mounts.com
Page 9
VPM
Attaching the Flat-Panel to the VPM Mount
Choose one of the following options.
Drawings not to scale.
Optional fixed tilt adapters not shown.
No Fixed Tilt Adapters
Are you attaching the VPM directly to the flat-panel, or
are you using an adapter plate?
•If directly to the flat-panel, insert
Flat- Panel
four (4) M4 x 10mm screws through the VPM
attachment head and 100 x 100mm pattern of
the flat-panel (see page 14) (Figure 1).
-200
•If using an adapter plate, insert
four (4) M4 x 5mm screws through the VPM
attachment head and 100 x 100mm pattern of
the adapter plate (see page 14) (Figure 1).
VPM-200
Mounting
Hardware
Do not overtighten the mounting hardware.
Proceed to the “Attaching the VPM Mount to a Pole”
section.
Figure 1
Using Fixed Tilt Adapters
Use four (4) M4 x 6mm pan combo screws to attach the
VPM attachment head to the fixed tilt adapters (Figure 2).
Proceed to the “Attaching the VPM Mount to a Pole”
section.
Flat-Panel
and/or
Adapter Plate
Figure 2
Page 10
M4 x 6mm pan
combo screw
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
VPM
Attaching the VPM Mount to a Pole
Drawings not to scale.
Mounting hardware not shown.
Re-insert the M8 x 40mm hex screws or insert M8 x 40mm
security screws into the two halves of the VPM to clasp
them around the pole at the desired position
(Figure 1).
At least two qualified people are needed to attach the
flat-panel and VPM to a pole.
If you are using a 2” pipe, replace the M8 x 40mm hex
screws with M8 x 60mm security screws (Figure 2).
Proceed to the “Adjusting the VPM Mount Tension”
section.
Caution:
Front plate of VPM
Tighten both screws
simultaneously
Figure 1
M8 Screws
Back plate of VPM
Note: Do Not overtighten the M8 Screws
M8 x 60mm
Hex Screw
2” Pipe
Figure 2
Installation Instructions
Visit the Premier Mounts website at www.mounts.com
Page 11
VPM
Adjusting the VPM Mount Tension
Your VPM ships from the factory pre-tensioned. However, you can fine-tune adjust the amount of
pressure required to move the attachment head of the
VPM.
Use the enclosed Allen wrench to adjust the tension by
loosening or tightening the M10 set screws on each side
of the VPM.
Do not overtighten or remove the set screws.
M10 Set Screw
Installing Multiple VPMs (Optional)
You can attach multiple VPM mounts to a pole, such as
for back-to-back flat-panel installations.
Page 12
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
VPM
Technical Specifications
All measurements are in inches [millimeters].
.104
2.64
12°
12°
4.56
115.87
3.95
100.23
3.94
100
12°
2.89
73.50
4.79
121.56
3.94
100
12°
Ø .18
4.50
10°
A
4.56
115.87
A
Attachment Head Mounting Pattern
A: 100 x 100mm VESA pattern
A
A
C
B
C
B
D
E
D
B
E
Adapter Plate Mounting Patterns
B. 200 x 100mm VESA pattern (M4 Phillips flat head screws only)
C. 200 x 200mm VESA pattern
If an M4 or M5 is to be used, a M4 or M5 washer must also be used.
E
B
D
E
B
D
B
D. 100 x 100mm VESA pattern
E. 75 x 75mm VESA pattern
C
Installation Instructions
C
Visit the Premier Mounts website at www.mounts.com
Page 13
VPM
Warranty
PREMIER MOUNTS
LIMITED LIFETIME WARRANTY
What and Who is Covered by this Limited Warranty and for How Long
Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original
owner of this product. The limited warranty is valid only for the original purchaser of the product.
What Premier Mounts Will Do
At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective.
If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you
at no charge, but you must pay any labor costs.
What is Not Covered; Limitations
PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS,
PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM
IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS.
PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT
RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO,
INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE
PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address
below within thirty (30) days. Proof of purchase (an original sales receipt) from the original consumer purchaser must
accompany all warranty claims. Warranty claims must also include a description of the problem, the purchaser’s name,
address, and telephone number. General inquiries can be addressed to Premier Mounts Customer Service at 1-800368-9700. Warranty claims will not be accepted over the phone or by fax.
Premier Mounts
Attn: Warranty Claim
1321 S. State College Blvd.
Fullerton, CA 92831
How State Law Applies
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
Disclaimer
Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that
the information contained herein covers all details, conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this product. The information contained in this document
is subject to change without notice or obligation of any kind. Premier Mounts makes no representation of warranty,
expressed or implied, regarding the information contained herein. Premier Mounts assumes no responsibility for
accuracy, completeness or sufficiency of the information contained in this document.
©Premier Mounts 2011
Page 14
Visit the Premier Mounts website at www.mounts.com
Installation Instructions

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement