advertisement
Kramer Electronics, Ltd.
USER MANUAL
Model:
SG-6005xl
Genlock Multistandard SPG/Audio Generator
Contents
Contents
Recommendations for Best Performance
Defining the SG-6005xl Genlock Multistandard SPG/Audio Generator
Installing the SG-6005xl in a Rack
Connecting the SG-6005xl Genlock Multistandard SPG/Audio Generator 7
7 Using the SG-6005xl Genlock Multistandard SPG/Audio Generator 8
Operating the SG-6005xl Genlock Multistandard SPG/Audio Generator 8
Figures
Figure 1: SG-6005xl Front and Rear Panel
Figure 2: Connecting a SG-6005xl Genlock Multistandard SPG/Audio Generator
Figure 3: Connecting a PC without using a Null-modem Adapter
Tables
Table 1: SG-6005xl Front and Rear Panel Features
Table 3: Technical Specifications of the SG-6005xl
i
Introduction
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups
that are clearly defined by function.
Congratulations on purchasing your Kramer SG-6005xl Genlock Multistandard
SPG
/Audio Generator, which is ideal for:
•
Studio master genlock to one stable source
•
Black or color bar reference for professional video cameras that need a stable reference
•
Use as a test and alignment tool for professional video/audio equipment
•
Use as a color bar generator as filler for recording in a duplication studio
Each package includes the following items:
•
SG-6005xl Genlock Multistandard SPG/Audio Generator
•
Power cord, rack “ears” and Null-modem adapter
•
Windows
®
-based Kramer control software
•
This user manual
2 Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and packaging materials for possible future shipment
•
Review the contents of this user manual
•
Use Kramer high performance high resolution cables
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:
Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7: Scan
Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack
Adapters; GROUP 11: Sierra Products
2 Sync Pulse Generator
3 Downloadable from http://www.kramerelectronics.com
4 Download up-to-date Kramer user manuals from http://www.kramerelectronics.com
5 The complete list of Kramer cables is available from http://www.kramerelectronics.com
1
Getting Started
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
3 Overview
The SG-6005xl is a broadcast quality, multi-standard SPG (Sync Pulse Generator), with black burst, color bar, and audio tone outputs. The SG-6005xl has 10 composite video outputs on BNC connectors, which can be configured as either a black burst or a color bar signal.
In particular, the SG-6005xl:
•
Features audio outputs that are available in AES 75
Ω (AES-3id) and
AES/EBU digital formats, as well as in unbalanced and balanced analog audio formats. All of the outputs are available simultaneously
•
Has balanced audio and AES/EBU outputs on XLR connectors, while the
AES-75
Ω (AES-3id) are on BNC connectors, and the unbalanced audio outputs are on RCA connectors
•
Offers a choice of nine color bars, letting you set timing parameters, SCH and phase
•
Lets you adjust the frequency and amplitude for the audio signals
•
Can genlock the SPG to an external composite video source via its looping input with selectable termination
The SG-6005xl is housed in a 19” 1U rack mountable enclosure, and is fed from a
100-240 VAC universal switching power supply.
The SG-6005xl can be operated via the front panel buttons with an LCD and a user-friendly menu, and remotely operated via the RS-232 interface
.
3.1 Recommendations for Best Performance
To achieve the best performance:
•
Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
•
Avoid interference from neighboring electrical appliances that may adversely influence signal quality and position your SG-6005xl away from moisture, excessive sunlight and dust
4 Defining the SG-6005xl Genlock Multistandard SPG/Audio
Generator
and Table 1 define the front and rear panels of the SG-6005xl.
1 The Communication Protocol is available on request from Kramer support
3
Defining the SG-6005xl Genlock Multistandard SPG/Audio Generator
4
Figure 1: SG-6005xl Front and Rear Panel
KRAMER: SIMPLE CREATIVE TECHNOLOGY
14
15
16
17
18
19
20
21
22
23
24
6
7
8
9
3
4
5
#
1
2
10
11
12
13
Defining the SG-6005xl Genlock Multistandard SPG/Audio Generator
Table 1: SG-6005xl Front and Rear Panel Features
Feature
POWER Switch
SETUP / MENU
LCD Display
MENU Button
ENTER Button
Button
Button
Button
Button
GENLOCK Button
Function
Illuminated switch for turning the unit ON or OFF
Displays user interface messages and configuration menu items
Press to open the menu (see
Press to load and save a set up, and enter the submenus
Press to decrease numerical values or select from several definitions
Press to move down the menu list
Press to move up the menu list values
Press to increase numerical values or select from several definitions
Press to toggle between a genlocked generator and a free-running generator
When lit, the machine will “genlock” to a valid reference input. When not lit, the timing of the generator is internally generated (free-running)
Press and hold
to lock/unlock the front panel buttons PANEL LOCK Button
REFERENCE
INPUT BNC Connector Connect a reference input for genlocking the machine
LOOP BNC Connector Connect to an additional machine to loop the genlocking source
TERM Button When looping, release the TERM button
When not looping, terminate the line by pressing the button
VIDEO OUTPUT BNC Connectors
AUDIO
OUTPUTS
AES 75
Ω
BNC
Connectors
AES/EBU
XLR
Connectors
ANALOG
RCA
Connectors
1+2
3+4
1+2
3+4
LEFT
Connect to a video acceptor (from 1 to 10)
Connect to an AES-3id digital audio acceptor (for channels 1 and 2)
Connect to an AES-3id digital audio acceptor (for channels 3 and 4)
Connect to an AES/EBU digital audio acceptor (for channels 1 and 2)
Connect to an AES/EBU digital audio acceptor (for channels 3 and 4)
RIGHT Connect to an analog audio acceptor
BALANCED
ANALOG XLR
Connectors
LEFT Connect to a balanced analog audio acceptor
RIGHT
RS-232 9-pin D-sub Port
Power Connector with Fuse
Connects to the PC or the Remote Controller
AC connector enabling power supply to the unit
1 If a reference input is not connected, the GENLOCK button blinks when pressed
2 For about 2 seconds
3 Known in the industry as AES-3id
4 In accordance with the standard, the audio digital stream contains two audio channels
5 Known in the industry as AES3 Type I
6 Via a null-modem connection
5
Installing the SG-6005xl in a Rack
5 Installing the SG-6005xl in a Rack
This section describes what to do before installing in a rack and how to rack mount.
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the SG-6005xl Genlock Multistandard SPG/Audio Generator
6 Connecting the SG-6005xl Genlock Multistandard SPG/Audio
Generator
Figure 2: Connecting a SG-6005xl Genlock Multistandard SPG/Audio Generator
To connect
the SG-6005xl Genlock Multistandard SPG/Audio Generator, as
illustrated in the example in Figure 2 :
1. Connect the VIDEO OUTPUT BNC connectors to up to 10 composite video acceptors
, for example:
OUTPUT 1 to a non linear editor
OUTPUT 6 to a studio camera
OUTPUT 10 to an input on the Kramer VS-808xl 8x8 Video/Audio
Matrix Switcher
2. Connect the AUDIO OUTPUTS as follows:
1 Switch OFF the power on each device before connecting it to your SG-6005xl. After connecting your SG-6005xl, switch on its power and then switch on the power on each device
2 You do not have to connect all the outputs
7
Using the SG-6005xl Genlock Multistandard SPG/Audio Generator
The LEFT and RIGHT ANALOG RCA connectors to an analog stereo audio acceptor (for example, the audio input on the Kramer VS-808xl
8x8 Video/Audio Matrix Switcher)
The AES-75
Ω BNC connectors (for channels 1+2 and 3+4) to AES-75Ω
(AES-3id) digital stereo audio acceptors
The AES/ABU XLR connectors (for channels 1+2 and 3+4) to
AES/EBU digital audio acceptors
The LEFT and RIGHT BALANCED ANALOG XLR connectors to an
analog balanced stereo audio acceptor
3. If required
, connect:
A Genlock source to the REFERENCE INPUT BNC connector
The LOOP BNC connector to the INPUT BNC connector of the next unit in the line, and release the TERM button for looping
4. If required, connect a PC and/or controller to the RS-232 port (see
5. Connect the power connector to the mains electricity
7 Using the SG-6005xl Genlock Multistandard SPG/Audio
Generator
This section describes how to:
•
Operate the SG-6005xl (see
•
Use front PANEL LOCK button (see
7.1 Operating the SG-6005xl Genlock Multistandard SPG/Audio Generator
The SG-6005xl can save and load up to 16 setups via the menu.
To use the menu, press the:
•
MENU button to start the menu
•
ENTER button to accept changes
• and buttons to scroll through the menu and submenus
• and to increase or decrease numerical values or select from several definitions of a setup
Upon exiting the menu, the SAVE SETTING AS item appears.
Table 2 defines the menu items.
Table 2: The SG-6005xl Menu
#
1
2
Menu Item
LOAD SETUP NUMBER …
Submenu
1 to 16 (press ENTER to load)
SAVE SETTING AS SETTING NUMBER … 1 to 16 (press ENTER to save)
Default Value
2 Press the GENLOCK button to toggle between a genlocked generator and a free-running generator
3 Pushed in terminates the input. Release when the input extends to another unit
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
7
Using the SG-6005xl Genlock Multistandard SPG/Audio Generator
#
3
4
5
6
Menu Item
SET UP … FACTORY RESET
SET VIDEO SIGNAL (enter submenu)
TEST SIGNAL
SET STANDARD
SET (enter submenu)
VIDEO OUTPUT CH 1 to CH 10
SET … AUDIO TUNING (enter submenu)
CHANNEL L (1,3)
Frequency
CHANNEL R (2,4)
Frequency
ANALOG LEFT LEVEL
ANALOG LEFT CHANNEL
ANALOG RIGHT LEVEL
ANALOG RIGHT CHANNEL
DIGITAL 1 (L) LEVEL
DIGITAL 2 (R) LEVEL
CLICK IN LEFT CHANNELS
SET …GENLOCK (enter submenu)
Submenu
Press ENTER to reset
Default Value
COLOR BARS 75%
SPLIT BARS 75%
HORIZONTAL BARS 75%
INVERS HDR. BARS 75%
COLOR BARS 75%
MULTIBURST 5.8
PULSE 2T AND BAR
VITS 330
TEST PATTERN 1
TEST PATTERN 2
525i NTSC 3.58
625i PAL 4.43
625i PAL 4.43
BLACK BURST
TEST SIGNAL
10Hz – 20000Hz (in 10Hz steps)
10Hz – 20000Hz (in 10Hz
-19dBu (-25dBu) to
+12dBu (+6dBu)
SILENT, ACTIVE
-19dBU (-25dBu) to
+12dBu (+6dBu)
SILENT, ACTIVE
-31dBFS to 0dBFS
SILENT, ACTIVE
-31dBFS to 0dBFS
SILENT, ACTIVE
-31dBFS to 0dBFS
SILENT, ACTIVE
-31dBFS to 0dBFS
SILENT, ACTIVE
DISABLE, 1 SEC to 4
SEC
BLACK BURST
1000Hz
1000Hz
-19dBu (-25dBu)
SILENT
-19dBu (-25dBu)
SILENT
-31dBFS
SILENT
-31dBFS
SILENT
-31dBFS
SILENT
-31dBFS
SILENT
DISABLE
1 (1, 3) refer to the ANALOG LEFT, and to the BALANCED ANALOG LEFT signals, respectively
2 To speed up the increase or decrease rate of the values, press the or buttons simultaneously with the ENTER button
3 (2, 4) refer to the ANALOG RIGHT, and to the BALANCED ANALOG RIGHT signals, respectively
4 The values without parentheses refer to the BALANCED ANALOG signals, the values in parentheses refer to the ANALOG signals
5 Refers to the left channel of the digital signal
6 Refers to the right channel of the digital signal
7 Insert a pulse signal and select the pulse rate
9
8
9
Using the SG-6005xl Genlock Multistandard SPG/Audio Generator
# Menu Item
FACTORY RESET
GENLOCK MODE
GENLOCK TIMING HORIZONTAL
GENLOCK TIMING VERTICAL
GENLOCK EXTRA V SHIFT
GENLOCK SC PHASE SHIFT
NON-GENLOCK or HVmode
SCHphase
TEST 1 PROGRAMMING
ADDRESS OF machine
Submenu Default Value
Press ENTER to reset the
GENLOCK parameters
HV only, HV and SC HV only
from -31968ns to
0
from -625 line to +625 line 0
-1 frame, 0 frame, +1 frame
from -185 ° to +185°
from -64 ° to +63°
0 frame
0
0
TEST 2 PROGRAMMING
First, Second First
7.2 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via the front panel buttons, lock your SG-6005xl. Unlocking releases the protection mechanism.
To lock the SG-6005xl:
•
Press the LOCK button for more than three seconds, until the LOCK button lights
The front panel is locked. Pressing a button will have no effect other than causing the LOCK button to flash
To unlock the SG-6005xl:
•
Press the lit LOCK button for more than three seconds, until the LOCK button no longer lights
The front panel unlocks
7.3 Remotely Operating via RS-232
You can remotely operate the SG-6005xl via RS-232 using a device such as a PC.
To connect a PC to the SG-6005xl unit using the Null-modem adapter provided with the machine (recommended):
•
Connect the RS-232 9-pin D-sub rear panel port on the SG-6005xl unit to the Null-modem adapter and connect the Null-modem adapter with a 9-wire flat cable to the RS-232 9-pin D-sub port on your PC
To connect a PC to the SG-6005xl unit without using a Null-modem adapter:
•
Connect the RS-232 9-pin D-sub port on your PC to the RS-232 9-pin D-sub
rear panel port on the Master SG-6005xl unit, as illustrated in Figure 3
1 Warning that you need to unlock to regain control via the front panel
10
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
PIN 5 Connected to PIN 5 (Ground)
PIN 3 Connected to PIN 2
PIN 2 Connected to PIN 3
Female DB9 (From PC)
PIN 4 Connected to PIN 6
PINS 8, 7, 1 Connected together
If a Shielded cable is used, connect the shield to PIN 5
Male DB9
Figure 3: Connecting a PC without using a Null-modem Adapter
8 Technical Specifications
Table 3 includes the technical specifications.
Table 3: Technical Specifications
of the SG-6005xl
INPUTS:
OUTPUTS:
VIDEO STANDARDS:
COLOR BAR:
STABILITY:
S/N RATIO:
DIGITIZATION:
CONTROLS:
POWER SOURCE:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
1 REF (genlock), looping on BNC connectors, 1Vpp/75
Ω on BNC connectors with a termination switch
10 composite video on BNC connectors, globally configurable: black burst 0.3Vpp/75
Ω
(sync) or 1Vpp/75
Ω max (color bar);
1 stereo balanced analog audio on 2 XLR connectors, 12dBu max;
1 unbalanced stereo analog audio on 2 RCA connectors, 6dBu max;
2 AES/EBU digital audio on XLR connectors, 0dBFS max;
2 AES 75
Ω (AES-3id) digital audio on BNC connectors, 0dBFS max
PAL, NTSC
8 selectable patterns
1ppm
VIDEO: >73dB (black burst)
VIDEO: 10 bits, 27MHz
AUDIO: >89dB
AUDIO: 20 bits, 48kHz
VIDEO: black burst or test signal configuration
AUDIO: frequency out: 10Hz to 20kHz; audio analog range: 31dBu; audio digital range:
31dBFS; each channel may be set to silent;
Control via front panel (OSD) and RS-232;
Buttons for genlock, panel lock, input termination
100-240VAC, 50/60Hz, 10VA
48.3cm x 17.8cm x 4.4cm (19in x 7in x 1.8in) W, D, H rack mountable
2.5kg (5.5lbs) approx.
Power cord, rack “ears” and Null-modem adapter
1 Specifications are subject to change without notice
11
12
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer following terms.
) warrants this product free from defects in material and workmanship under the
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.
3. Damage, deterioration or malfunction resulting from: i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature ii) Product modification, or failure to follow instructions supplied with the product iii) Repair or attempted repair by anyone not authorized by Kramer iv) Any shipment of the product (claims must be presented to the carrier) v) Removal or installation of the product vi) Any other cause, which does not relate to a product defect vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1.
Removal or installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1.
To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2.
Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and a description of the problem(s).
3.
For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.
EXCLUSION OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.
This equipment has been tested to determine compliance with the requirements of:
EN-50081:
EN-50082:
CFR-47:
"Electromagnetic compatibility (EMC); generic emission standard.
Part 1: Residential, commercial and light industry"
"Electromagnetic compatibility (EMC) generic immunity standard.
Part 1: Residential, commercial and light industry environment".
FCC* Rules and Regulations:
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other components.
* FCC and CE approved using STP cable (for twisted pair products)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
For the latest information on our products and a list of
Kramer distributors, visit www.kramerelectronics.com
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Caution
Safety Warning:
Disconnect the unit from the power supply before opening/servicing.
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: [email protected]
P/N: 2900-000322 REV 2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement