E
v1.0 (1.0.1.0) (EN/F/E)
user manual
guide de l’utilisateur
manual de usuario
Product registration
Thank you for purchasing an RCA product. We pride ourselves on the quality and
reliability of all our electronic products but if you ever need service or have a question,
our customer service staff stands ready to help. Contact us at www.rcaaudiovideo.com.
PURCHASE REGISTRATION: Registering On-line will allow us to contact you in the
unlikely event a safety notification is required under the Federal Consumer Safety Act.
Register Online at: WWW.RCAAUDIOVIDEO.COM. Click on Product Registration
and Fill Out the Brief Questionnaire.
RC142
Enregistrement du produit
Merci d’avoir acheté un produit RCA. Nous sommes fiers de la qualité et de la fiabilité
de tous nos produits électroniques, mais en cas de nécessité de réparation ou pour toute
question, le personnel de notre service clientèle est prêt à vous aider. Contactez-nous
sur www.rcaaudiovideo.com. ENREGISTREMENT D’ACHAT: Enregistrer votre produit en ligne nous permettra de communiquer
avec vous pour tout avis de sécurité au sujet du produit en vertu du Federal Consumer Safety Act (Loi fédérale de protection
du consommateur). Enregistrez votre produit en ligne sur: WWW.RCAAUDIOVIDEO.COM. Cliquez sur Enregistrement
produit et remplissez le court questionnaire.
Enregisregistro del productotrement du produit
So
pa
pr
•
•
•
•
•
•
•
•
Gracias por comprar un producto RCA. Nos enorgullece la calidad y fiabilidad de todos nuestros productos electrónicos, pero si
alguna vez necesita servicios técnicos o si tiene alguna pregunta, nuestro personal de atención al cliente está a su disposición
para ayudarle. Comuníquese con nosotros en www.rcaaudiovideo.com. REGISTRO DE COMPRA: El registro en línea nos
permitirá comunicarnos con usted en el caso de tener que enviarle algún aviso de seguridad en virtud de la Ley Federal de
Seguridad del Consumidor. Registre el producto en línea en: WWW.RCAAUDIOVIDEO.COM. Haga clic en Registro del
producto y responda al cuestionario.
•
•
•
•
EN/F/E
It is important to read this user manual prior to using your new product for the first time.
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.
Es importante leer este manual antes de usar por vez primera su equipo.
•
General controls
Radio
W
Right view
Turning on/off the Radio
W
TUNING – Select radio frequencies
Press the ON/OFF button to turn on the radio. Press again to
turn off the radio.
–VOLUME+ – Adjust volume
Th
wi
English
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
•
2
il
F
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
al
r
o
o
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may not apply to your
particular product; however, as with any electronic product,
precautions should be observed during handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Use only with the cart, stand,
]
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
Portable Cart Warning
injury from tip-over.
• Unplug this apparatus during lightning storms or when
ADDITIONAL SAFETY INFORMATION
• The AC/AC adapter supplied with this product is
intended to be correctly oriented in a vertical or floor
mount position.
• Do not use unauthorized chargers or power adapters.
Use only chargers or power adapters that came with
your product or that is listed in the user’s guide.
• Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
• Always leave sufficient space around the product for
ventilation. Do not place product in or on a bed, rug,
in a bookcase or cabinet that may prevent air flow
through vent openings.
• Do not place lighted candles, cigarettes, cigars, etc. on
the product.
• Care should be taken so that objects do not fall into the
product.
• Do not attempt to disassemble the cabinet. This product
does not contain customer serviceable components.
• The marking information is located at the bottom of
apparatus.
• To be completely disconnect the power input, the AC/
AC adaptor of apparatus shall be disconnected from the
mains.
• AC/AC adaptor is a disconnect device. The AC/AC
adaptor should not be obstructed OR should be easily
accessed during intended use.
• The ventilation should not be impeded by covering
the ventilation openings with items such as newspaper,
table-cloths, curtains etc.
• No naked flame sources such as lighted candled should
be placed on the apparatus.
• Attention should be drawn to the environmental aspects
of battery disposal.
• The use of apparatus in moderate climates.
Important battery precautions
•
Any battery may present a risk of fire, explosion, or
chemical burn if abused. Do not try to charge a battery
that is not intended to be recharged, do not incinerate,
The unit is equipped with GRAD-U-WAKE. The alarm volume
will increase gradually to its maximum in about 30 to 45
seconds.
•
•
Wake to radio
To
1.
2.
3.
set wake radio station:
Select radio band.
Select desired station.
Adjust the volume by + VOL –.
Checking wake time
Slide the
/WAKE1/WAKE2/
switch to WAKE 1 or
WAKE 2 to check the set wake time.
Ways to turn off alarm
•
To silence the wake function momentarily, press
SNOOZE. The alarm or radio will be on again when
the snooze period (default: 9 minutes) is over. (see
Ecology
Help protect the environment - we recommend that you
dispose of used batteries by putting them into specially
designed receptacles.
•
If the alarm is set to wake to radio mode,
the alarm will not sound if the AUX source
is activated at the time of alarm.
Do not use the wake function in Aux
mode. No wake icon will be shown on the display
in this mode.
As no wake mode icon will be shown on the display
in AUX mode, switch off AUX mode when you press
WAKE –
OFF 1 or 2 to select wake source or
turn off alarm.
Sleep function
AC/AC adaptor:
Input: AC 120 V ~ 60 Hz
Output: AC 10.5 V @ 1 A
FCC Information
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
REV or FWD
to set
•
Ch
A
eq
B
P
•
•
B
•
•
•
•
To
1.
2.
3.
1. Connect your auxiliary source (e.g. mp3 player) to the
AUX input jack on the right side of the unit with an
audio cable (not included).
2. Turn on the unit and your auxiliary source.
3. Slide FM/AM/AUX to AUX to switch to listen to
auxiliary source. The AUX indicator on the front will
turn on. Slide to FM/AM again to switch back to listen
to the radio.
Brightness control
W
12
Ap
AU
to
th
co
wi
de
pr
an
Slide BRIGHTNESS switch on the back of the unit to Hi
(high) or Lo (low) position to adjust the brightness of the
display.
To
W
wa
de
ad
USB charging
Th
ex
pr
to
In sleep mode, the unit will turn off automatically after a
specified time (up to 2 hours).
1. Press and hold SLEEP.
2. While holding SLEEP, press
•
Electrical power information
Auxiliary source
Wake function
Wake to alarm
and do not puncture.
Non-rechargeable batteries, such as alkaline batteries,
may leak if left in your product for a long period of
time. Remove the batteries from the product if you
are not going to use it for a month or more.
• If your product uses more than one battery, do not
mix types and make sure they are inserted correctly.
Mixing types or inserting incorrectly may cause them
to leak.
• Discard any leaky or deformed battery immediately.
They may cause skin burns or other personal injury.
• Please help to protect the environment by recycling or
disposing of batteries according to federal, state, and
local regulations.
WARNING: The battery (battery or batteries or battery
pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
•
FCC Information
Before you begin
•
Power failure indicator
•
Changes or modifications not expressly approved by
Audiovox could void the user’s authority to operate the
equipment.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Before you begin
Plugging in for power
•
•
•
•
•
d
d
Connect the supplied power adaptor to the unit’s Power
jack, and connect the other end to a convenient wall
outlet.
Once connected with power, the clock flashes. Refer to
the Clock section for instructions on properly setting the
Clock.
Battery back-up operation
y
l
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
•
This clock radio is equipped with a timekeeping system
that can be powered with a 9-volt alkaline battery (not
included). The power failure protection circuit will not
operate unless battery is installed.
When normal household power is interrupted, or AC/
AC adaptor is unplugged, the battery will power the
clock radio to keep track of time and alarm settings
programmed into memory.
When the battery backup functions, the digital display
will not light, however, the function of alarm still occurs
during the power interruption if remaining battery
power is adequate.
Normal operation will resume after AC power is
restored so you will not have to reset the time or the
alarm.
To install the battery:
1. Remove battery compartment door (located at the
bottom of the radio) by applying thumb pressure to the
tab on battery door and then lift the door out and off
the cabinet.
2. Connect a 9-volt alkaline battery (not included) to the
connector plug.
3. Replace the compartment door.
If you have not installed the 9-volt alkaline battery in the
product, or the battery runs out while AC/AC adaptor is
disconnected, all the settings (clock and alarm) will be lost.
After AC/AC adaptor is reconnected, the Digital Display will
flash to indicate that power was interrupted and you should
readjust the time settings.
Alkaline (NEDA 1604A/IEC 6LR61) battery
is recommended. Carbon-zinc battery may
be used but memory holding time will be
substantially reduced. Memory holding
time for a fresh alkaline battery is approximately 8
hours (if alarm is not operated) which should take
care of short, nuisance-type AC power failures. To
preserve battery life, the unit should remain plugged
into an AC outlet. As the battery gets older, its
voltage drops and memory may be lost. Be sure to
replace the battery periodically. Battery should be
removed if the unit will be stored for more than
one month. A leaky battery can badly damage the
clock radio.
General controls
Top view
ON/OFF – Turn the unit on/off
REV/FWD
– Adjust clock time
SNOOZE – Turn off the wake function momentarily
(9 minutes); turn off the current sleep timer
WAKE –
OFF – Activate or change alarm settings
/WAKE1/WAKE2/
Wake 2 and clock time
– Slide switch to set Wake 1,
NAP – Activate nap function
SLEEP – Activate sleep function
Warranty information
12 Month Limited Warranty
Applies to RCA Clock Radios
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damage so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal
EN/F/E
It is important to read this user manual prior to using your new product for the first time.
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.
Es importante leer este manual antes de usar por vez primera su equipo.
•
General controls
Radio
W
Right view
Turning on/off the Radio
W
TUNING – Select radio frequencies
Press the ON/OFF button to turn on the radio. Press again to
turn off the radio.
AUX IN – Auxiliary input jack
Switching bands
–VOLUME+ – Adjust volume
800 700
100 96
Slide the band switch FM/AM/AUX to select between AM
and FM band.
Tuning the radio
Back view
Rotate the TUNING knob on the right of the unit to adjust
the radio frequency with reference to the tuning dial scale.
BRIGHTNESS – Select display brightness (Hi or Lo)
Built-in AFC
FM/AM/AUX – Select radio bands or AUX mode
The Built In Automatic Frequency Control (AFC) helps to
reduce drift on FM reception and keeps the radio locked in
on the FM station to which it is tuned.
USB CHARGING – To charge your cell phones via this USB
connector
AC IN – Plug in for power
This unit is equipped with an FM antenna at the back. Uncoil
the antenna to its full length for best reception. Tape the
end of the antenna onto the wall if possible to improve
reception.
A built-in ferrite rod antenna eliminates the need for an
outside antenna for AM reception. Rotating the unit slightly
may improve reception of distant AM stations.
Wake function
Setting wake time
Setting clock manually
1. Slide the
/WAKE1/WAKE2/
switch to
to
enter the clock setting mode.
2. Press
REV or FWD
to set the time.
• Press and hold to decrease or increase the time value
quickly.
• The “:” flashes on the display in clock setting mode.
• The clock is in 12 hour format. The AM indicator lights
to show AM time.
3. Slide the
/WAKE1/WAKE2/
switch to
.
Français
W
To
1.
2.
3.
C
Sl
W
W
•
•
•
AM antenna
Clock
Th
w
se
1. Slide the
/WAKE1/WAKE2/
switch to select
WAKE 1 or WAKE 2 setting mode.
2. Press
REV or FWD
to set the wake time.
• Press and hold to decrease or increase the time value
quickly.
• The “:” flashes on the display in wake time setting
mode.
• The clock is in 12 hour format. The AM indicator lights
to show AM time.
3. Slide the
/WAKE1/WAKE2/
switch to
.
S
•
•
•
•
To
1.
2.
Selecting wake source
You may choose radio or alarm as your wake up source.
• Press WAKE –
OFF 1 or 2 repeatedly to select your
choice of wake source (alarm
/ radio ).
• The corresponding wake setting icon will light when
alarm is set to activate.
IMPORTANTES INSTRUCTIO
BIEN LIRE ET CONSERVER POUR RÉFÉREN
•
•
Débranchez l’appareil pendant les orages ou si vous ne
l’utilisez pas pendant de longues périodes.
Confiez l’entretien à du personnel compétent.
P
•
o
•
•
•
•
•
•
product.
Do not attempt to disassemble the cabinet. This product
does not contain customer serviceable components.
The marking information is located at the bottom of
apparatus.
To be completely disconnect the power input, the AC/
AC adaptor of apparatus shall be disconnected from the
mains.
AC/AC adaptor is a disconnect device. The AC/AC
adaptor should not be obstructed OR should be easily
accessed during intended use.
The ventilation should not be impeded by covering
the ventilation openings with items such as newspaper,
table-cloths, curtains etc.
No naked flame sources such as lighted candled should
be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
The use of apparatus in moderate climates.
•
•
•
•
•
•
•
•
Important battery precautions
•
Any battery may present a risk of fire, explosion, or
chemical burn if abused. Do not try to charge a battery
that is not intended to be recharged, do not incinerate,
Wake to alarm
The unit is equipped with GRAD-U-WAKE. The alarm volume
will increase gradually to its maximum in about 30 to 45
seconds.
•
•
Wake to radio
To
1.
2.
3.
set wake radio station:
Select radio band.
Select desired station.
Adjust the volume by + VOL –.
Checking wake time
Slide the
/WAKE1/WAKE2/
switch to WAKE 1 or
WAKE 2 to check the set wake time.
Ways to turn off alarm
•
•
•
y
To silence the wake function momentarily, press
SNOOZE. The alarm or radio will be on again when
the snooze period (default: 9 minutes) is over. (see
SmartSnoozeTM section for more info)
To turn off the alarm, press ON/OFF. The wake alarm or
radio will activate again the next day.
To disable the wake function completely, press WAKE
–
OFF 1 or 2 repeatedly until no wake mode icon
shows on the display.
SmartSnoozeTM
•
•
•
•
This operation allows extra sleep time when the alarm
sounds. The alarm can be turned off temporarily by
pressing SNOOZE or any one of the SmartSnoozeTM
buttons until the snooze period is over.
SmartSnoozeTM buttons include: SNOOZE, NAP, SLEEP,
REV and FWD
Snooze function may be used repeatedly for up to 2
hours. After this, the alarm will turn off until the next
alarm conditions are met.
SmartSnoozeTM will be activated only when the
/
WAKE1/WAKE2/
switch is set to
.
To set the “quiet” period with Snooze:
1. Press and hold SNOOZE.
2. Press
REV or FWD
to adjust snooze time. Then
release SNOOZE button to save the setting. The Snooze
Period range can be set from 1 to 30 minutes (The
default time is 9 minutes).
our
•
If the alarm is set to wake to radio mode,
the alarm will not sound if the AUX source
is activated at the time of alarm.
Do not use the wake function in Aux
mode. No wake icon will be shown on the display
in this mode.
As no wake mode icon will be shown on the display
in AUX mode, switch off AUX mode when you press
WAKE –
OFF 1 or 2 to select wake source or
turn off alarm.
Sleep function
1. Press and hold SLEEP.
2. While holding SLEEP, press
REV or FWD
to set
the time for sleep mode. The time range is up to 2
hours. The radio will then be switched on.
3. To view remaining time in sleep mode, press and hold
SLEEP.
4. To cancel the sleep function, press SNOOZE or ON/
OFF.
u
–
•
•
•
•
•
Toute pile peut présenter un risque d’incendie,
d’explosion ou de brûlure chimique si elle n’est pas
manipulée avec soin. N’essayez pas de recharger une
pile qui n’est pas conçue pour être rechargée; n’essayez
pas de l’incinérer ou de la percer.
Les piles non rechargeables, comme les piles alcalines,
peuvent couler si elles sont laissées dans votre appareil
pendant une longue période. Retirez les piles de
l’appareil si vous ne l’utilisez pas pendant plus d’un
mois.
Si votre appareil utilise plus d’une pile, ne mélangez
pas les types de pile et assurez-vous qu’elles sont
installées correctement. Si différents types de piles sont
mélangés ou si elles sont installées incorrectement, elles
pourraient couler.
Jetez immédiatement les piles déformées ou qui
coulent. Les piles qui coulent peuvent causer des
brûlures et d’autres blessures.
Aidez à protéger l’environnement en recyclant ou en
disposant des piles selon les réglementations fédérales,
FCC Information
•
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
Brightness control
Slide BRIGHTNESS switch on the back of the unit to Hi
(high) or Lo (low) position to adjust the brightness of the
display.
USB charging
Use the USB charging port to charge your smartphone or to
power usb powered devices such as a USB type lamp or fan.
your cell
phone
USB cable (not
included)
To connect your cell phone for charging:
Use a USB cable (not included) to connect your cell phone
to the USB connector of the unit. Your cell phone should
start charging.
•
•
Charging function may not be supported
for all phones or electronic devices.
Charging function is not available in AM
mode.
Avant de commencer
Si cet appareil cause de l’interférence nuisible à la réception
de signaux de radio ou de télévision, ce qui peut être validé
en fermant et en allumant l’appareil, l’utilisateur est invité à
corriger cette interférence par une ou plusieurs des mesures
suivantes :
• Réorienter ou déplacer de l’antenne de réception.
• Augmenter de la distance entre l’appareil et le
récepteur.
• Brancher de l’appareil dans une prise murale faisant
partie d’un circuit d’alimentation électrique autre que
celui du récepteur.
• Consultez votre revendeur ou un technicien radio/
télévision compétent pour obtenir de l’aide.
Les changements ou modifications non expressément
approuvés par Audiovox peuvent annuler le droit de
l’utilisateur d’utiliser cet appareil.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
•
To
1.
2.
W
1. Connect your auxiliary source (e.g. mp3 player) to the
AUX input jack on the right side of the unit with an
audio cable (not included).
2. Turn on the unit and your auxiliary source.
3. Slide FM/AM/AUX to AUX to switch to listen to
auxiliary source. The AUX indicator on the front will
turn on. Slide to FM/AM again to switch back to listen
to the radio.
NAP function
To set the NAP time:
1. Press NAP once and the NAP icon will flash on the
display. Press
REV or FWD
to set the NAP time
(each press decreases or increases duration by 10
minutes. When you first set the NAP time, the first
default value is 20 minutes).
2. The current time shows after a few seconds if no button
is pressed. The icon NAP lights on the display.
3. To check remaining NAP time, press NAP once to show
briefly the NAP time left with the NAP icon flashing on
the display.
4. When the alarm sounds, press ON/OFF or NAP to
switch it off. Press SNOOZE to silence the nap function
momentarily. (see Ways to turn off alarm section for
more info)
• To cancel the function before the nap time ends, press
and hold NAP until no nap icon shows on the display.
•
3.
For catnaps up to 2 hours without disturbing the regular
alarm settings, the NAP function wakes you up after a short
period of time.
R RÉFÉRENCE ULTÉRIEURE
Précautions importantes concernant la pile
•
In sleep mode, the unit will turn off automatically after a
specified time (up to 2 hours).
UCTIONS DE SECURITE
e
Ba
Input: AC 120 V ~ 60 Hz
Output: AC 10.5 V @ 1 A
Auxiliary source
Wake function
oil
s
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand,
]
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
Portable Cart Warning
injury from tip-over.
Unplug this apparatus during lightning storms or when
•
12
Ap
AU
to t
this
con
wit
def
pro
and
To
Wa
wa
def
add
Thi
ext
pro
to c
pro
or o
or t
car
oth
syst
Thi
wh
bee
mis
def
THE
WA
PRO
CO
PUR
Thi
liab
IMP
LIM
AN
INC
MU
FRO
THE
INC
WA
assu
her
C
Le fonctionnement normal reprend lorsque
l’alimentation CA est rétablie; ainsi, vous n’aurez pas à
régler l’horloge et l’alarme à nouveau.
Pour installer la pile :
1. Retirez le couvercle du compartiment de la pile (situé
sur le dessous de la radio) en appuyant avec votre
pouce sur la languette puis en soulevant le couvercle
hors du compartiment.
2. Branchez une pile alcaline de 9 volts (non fournie) à la
fiche.
3. Replacez le couvercle du compartiment.
Indicateur de panne de courant
Si vous n’avez pas installé la pile alcaline de 9 volts dans
l’appareil, ou si la pile est déchargée et que l’alimentation CA
est débranchée, tous les réglages (horloge et alarme) seront
perdus. Lorsque l’alimentation CA est rétablie, l’affichage
numérique clignote pour indiquer que l’alimentation a été
interrompue et que vous devez régler l’horloge à nouveau.
Vu
ON
SN
rév
WA
de
rég
NA
1. Remove battery compartment door (located at the
bottom of the radio) by applying thumb pressure to the
tab on battery door and then lift the door out and off
the cabinet.
2. Connect a 9-volt alkaline battery (not included) to the
connector plug.
3. Replace the compartment door.
/WAKE1/WAKE2/
Wake 2 and clock time
– Slide switch to set Wake 1,
NAP – Activate nap function
SLEEP – Activate sleep function
Warranty information
12 Month Limited Warranty
Applies to RCA Clock Radios
AUDIOVOX ACCESSORIES CORP. (the Company) warrants
to the original retail purchaser of this product that should
this product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship
within 12 months from the date of original purchase, such
defect(s) will be repaired or replaced with reconditioned
product (at the Company’s option) without charge for parts
and repair labor.
To obtain repair or replacement within the terms of this
Warranty, the product is to be delivered with proof of
warranty coverage (e.g. dated bill of sale), specification of
defect(s), transportation prepaid, to the Company at the
address shown below.
This Warranty does not extend to the elimination of
externally generated static or noise, to correction of antenna
problems, loss/interruptions of broafast or internet service,
to costs incurred for installation, removal or reinstallation of
product, to corruptions caused by computer viruses, spyware
or other malware, to loss of media, files, data or content,
or to damage to tapes, discs, removable memory devices or
cards, speakers, accessories, computers, computer peripherals,
other media players, home networks or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof
which, in the opinion of the Company, has suffered or
been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or by removal or
defacement of the factory serial number/bar code label(s).
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY
PURCHASER FOR THE PRODUCT.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damage so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal
rights and you may also have other rights which vary from
state to state.
Recommendations before returning your product for a
warranty claim:
• Properly pack your unit. Include any remotes, memory
cards, cables, etc. which were originally provided with
the product. However DO NOT return any removable
batteries, even if batteries were included with the
original purchase. We recommend using the original
carton and packing materials. Ship to the address shown
below.
• Note that product will be returned with factory default
settings. Consumer will be responsible to restore any
personal preference settings.
Audiovox Electronics Corp.
Attn: Service Department.
150 Marcus Blvd.
Hauppauge N.Y. 11788
1-800-645-4994
For Canada Customers, please ship to:
Audiovox Return Centre
c/o Genco
6685 Kennedy Road,
Unit#3, Door 16,
Mississuaga, Ontario
L5T 3A5
This Warranty is in lieu of all other express warranties or
liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY.
ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS
FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY. No person or representative is authorized to
assume for the Company any liability other than expressed
herein in connection with the sale of this product.
Commandes générales
800 700
100 96